Olof Johansson [Sun, 28 Apr 2019 19:32:38 +0000 (12:32 -0700)]
Merge tag 'omap-for-v5.2/dt-signed' of git://git./linux/kernel/git/tmlind/linux-omap into arm/dt
Devicetree changes for omap variants
This series of changes configures dra7 pcie x2 lane mode, configures
am43xx-epos-evm regulators and keypad wakeup source, and uses standard
reset-gpios instead of gpio-reset for n810.
We also need to split dra7 dtsi files for properly supporting dra76x
and am576 as some of the devices are different such as usb and pruss.
* tag 'omap-for-v5.2/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra7: Separate AM57 dtsi files
dt-binding: arm: omap: Add information for AM5748
ARM: dts: omap2420-n810: Use new CODEC reset pin name
ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:32:12 +0000 (12:32 -0700)]
Merge tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.2
* Hi3660 SoC and related boards:
- Added DMA support for the uart nodes
- Added the asp DMA controller node
- Replaced dma-min-chan with dma-channel-mask to follow the binding
* Hi3670 SoC and related boards:
- Reused Hi3660 reset to support Hi3670, updated the binding
document and added dts node
- Reused Hi3660 MMC controller to support Hi3670, updated the
binding document and added related nodes to support SD and WiFi
for the SoC and hikey970 board
- Added UFS controller node
* tag 'hisi-arm64-dt-for-5.2' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hi3670: Add UFS controller support
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
arm64: dts: hi3660: Add hisi asp dma device
arm64: dts: hi3660: Add dma to uart nodes
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
arm64: dts: hisilicon: hi3670: Add MMC controller support
dt-bindings: mmc: Add HI3670 MMC controller binding
arm64: dts: hisilicon: hi3670: Add reset controller support
dt-bindings: reset: Add HI3670 reset controller binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:31:33 +0000 (12:31 -0700)]
Merge tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx into arm/dt
arm64: dts: zynqmp: DT changes for v5.2
- Align xlnx-zynqmp-clk.h file name and separate
binding for clock driver
- Add TI quirks to zynqmp boards
* tag 'zynqmp-dt-for-v5.2' of https://github.com/Xilinx/linux-xlnx:
arm64: zynqmp: dt: Add TI PHY quirk
dt-bindings: xilinx: Separate clock binding from firmware doc
include: dt-binding: clock: Rename zynqmp header file
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:29:48 +0000 (12:29 -0700)]
Merge tag 'samsung-dt64-5.2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.2
1. Use proper clock rates for GSCALER module on TM2 boards.
2. Add clocks for local paths on DECON and GSCALER modules of
Exynos5433.
3. Add Slim SecuritySubSystem to Exynos5433.
* tag 'samsung-dt64-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add SlimSSS to Exynos5433
arm64: dts: exynos: add DSD/GSD clocks to DECONs and GSCALERs of Exynos5433
arm64: dts: exynos: configure GSCALER related clocks on TM2
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:29:20 +0000 (12:29 -0700)]
Merge tag 'samsung-dt-5.2' of https://git./linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.2
1. Use proper ADC on Exynos4412.
2. Extend the Exynos5420 Arndale Octa board with: CPU cooling maps,
unused regulators, ADC and UHS-I SD card support. Beside that adjust
regulators to proper level and add always-on when needed.
3. Extend the Exynos5260: high speed I2C and proper external interrupts.
Also fix shared external interrupt line and use better PLL for MMC
clocks.
4. Fix audio recording (broken around v5.1) and microphone recording
(since v4.14) on Exynos5422 Odroid XU3 boards.
5. Minor cleanups (stdout-path and bootargs).
* tag 'samsung-dt-5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: exynos: Remove console argument from bootargs
ARM: dts: exynos: Use stdout-path property instead of console in bootargs
ARM: dts: exynos: Fix spelling mistake of EXYNOS5420
ARM: dts: exynos: Fix audio (microphone) routing on Odroid XU3
ARM: dts: exynos: Always enable necessary APIO_1V8 and ABB_1V8 regulators on Arndale Octa
ARM: dts: exynos: Extend the eMMC node on Arndale Octa
ARM: dts: exynos: Add support for UHS-I SD cards on Arndale Octa
ARM: dts: exynos: Adjust ldo23 and ldo27 to lower levels on Arndale Octa
ARM: dts: exynos: Fix audio routing on Odroid XU3
ARM: dts: exynos: Enable ADC on Arndale Octa
ARM: dts: exynos: Fix interrupt for shared EINTs on Exynos5260
ARM: dts: exynos: Add interrupts for dedicated EINTs on Exynos5260
ARM: dts: exynos: Add high speed I2C ports for Exynos5260
ARM: dts: exynos: Use bustop PLL as the source for MMC clocks on Exynos5260
ARM: dts: exynos: Order nodes alphabetically in Arndale Octa
ARM: dts: exynos: Add CPU cooling on Arndale Octa
ARM: dts: exynos: Add unused PMIC regulators on Arndale Octa board
ARM: dts: exynos: Use stdout path property on Arndale Octa board
ARM: dts: exynos: Document regulator used by ADC on Odroid U3
ARM: dts: exynos: Use ADC for Exynos4x12 on Exynos4412
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:27:57 +0000 (12:27 -0700)]
Merge tag 'stm32-dt-for-v5.2-1' of git://git./linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT updates for v5.2, round 1
Highlights:
----------
MPU part:
- Add initial support of stm32mp157a-dk1 board:
This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
and 512MB of DDR3. Several connections are available on this boards:
4*USB2.0, 1*USB2.0 typeC, SDcard, RJ45, HDMI, Arduino connector, ...
- Add initial support of stm32mp157c-dk2 board:
This board is a "super-set" of stm32mp157a-dk1. It embeds a STM32MP157c SOC
with AC package (TFBGA361, 148 ios) and 512MB of DDR3. Same connections
than stm32mp157a-dk1 board are available. Display panel (otm8009a) and
Murata wifi/BT combo is added.
- Add and enable SD card support (MMCI variant) on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
- Add and enable PMIC support (STPMIC1 chip) on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
- Add and enable IPCC mailbox support on stm32mp157c-ed1/ev1 and
on stm32mp157a-dk1/dk2 boards.
- Add sysconfig clock support on stm32mp157c.
- Add romem and temperature calibration support on stm32mp157c.
- Add SPDIFRX support on stm32mp157c.
- Enable CEC on stm32mp157a-dk1/dk2.
MCU part:
- Add and enable SD card support (MMCI variant) on stm32h743 eval and disco
boards.
- Add romem and temperature calibration support on stm32f429
(and so stm32f469).
- Enable stm32f769 clock driver
* tag 'stm32-dt-for-v5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
ARM: dts: stm32: add cec pins muxing on stm32mp157
ARM: dts: stm32: add ltdc pins muxing on stm32mp157
ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
ARM: dts: stm32: Enable STM32F769 clock driver
ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
ARM: dts: stm32: add spdfirx pins to stm32mp157c
ARM: dts: stm32: add spdifrx support on stm32mp157c
ARM: dts: stm32: Add romem and temperature calibration on stm32f429
ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
ARM: dts: stm32: Add clock on stm32mp157c syscfg
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
ARM: dts: stm32: add sdmmc1 support on stm32mp157c
ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:16:56 +0000 (12:16 -0700)]
Merge tag 'aspeed-5.2-devicetree' of git://git./linux/kernel/git/joel/aspeed into arm/dt
ASPEED device tree updates for 5.2
- RTC and GFX DRM driver went upstream this cycle
- Miscellaneous board updates for Facebook and IBM BMCs
* tag 'aspeed-5.2-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
ARM: dts: aspeed: Add RTC node
ARM: dts: aspeed: witherspoon: Update BMC partitioning
ARM: dts: aspeed: cmm: enable iio-hwmon-adc
ARM: dts: aspeed: tiogapass: Enable VUART
ARM: dts: aspeed-g5: Add video engine
ARM: dts: aspeed: Enable the GFX IP
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
ARM: dts: aspeed: witherspoon: Enable vhub
ARM: dts: aspeed: palmetto: Fix flash_memory region
ARM: dts: aspeed: ast2500: Update flash layout
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:16:26 +0000 (12:16 -0700)]
Merge tag 'renesas-arm64-dt-for-v5.2' of https://git./linux/kernel/git/horms/renesas into arm/dt
Renesas ARM64 Based SoC DT Updates for v5.2
* R-Car Gen3 SoC based Salvator-X and Salvator-XS boards
- Add GPIO keys support
- Sort rwdt node alphabetically
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Use extended audio DMAC register
* R-Car M3-W (r8a7796) SoC
- Remove unneeded sound #address/size-cells
* R-Car M3-N (r8a77965) SoC
- Add SSIU support for audio
* R-Car E3 (r8a77990) and RZ/G2E (r8a774c0) SoCs
- Remove invalid compatible value for CSI40
* R-Car E3 (r8a77990) SoC
- Cprrect SPDX license identifier style
* R-Car E3 (r8a77990) based Ebisu board
- Add BD9571 PMIC with DDR0 backup power config
- Correct adv7482 hexadecimal register address
- Add GPIO expander
* R-Car E3 (r8a77990) based Ebisu and D3 (r8a77995) based Draak boards
- Update bootargs to bring them into line with other R-Car Gen3 boards
- Enable LVDS1 encoder
* R-Car D3 (r8a77995) based Draak board
- Correct EthernetAVB phy mode
- Enable CAN0 and CAN1
* RZ/G2E (r8a774c0) SoC
- Add CANFD support
- Correct CPU node style
* RZ/G2E (r8a774c0) and RZ/G2M (r8a774a1) SoCs
- Add clkp2 clock to CAN nodes
* RZ/G2E (r8a774c0) based EK874 board
- Add LED, CAN and RTC support
* tag 'renesas-arm64-dt-for-v5.2' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (26 commits)
arm64: dts: renesas: salvator-common: Add GPIO keys support
arm64: dts: renesas: use extended audio dmac register
arm64: dts: renesas: r8a77995: draak: Fix EthernetAVB phy mode to rgmii
arm64: dts: renesas: salvator-common: Sort node label
arm64: dts: renesas: Update Ebisu and Draak bootargs
arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes
arm64: dts: renesas: r8a774c0: Add CANFD support
arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes
arm64: dts: renesas: ebisu: Add PMIC DDR0 Backup Power config
arm64: dts: renesas: r8a77990-ebisu: Add BD9571 PMIC
arm64: dts: renesas: r8a77990: Remove invalid compatible value for CSI40
arm64: dts: renesas: r8a774c0: Remove invalid compatible value for CSI40
arm64: dts: renesas: r8a77995: draak: Enable CAN0, CAN1
arm64: dts: renesas: r8a774c0-cat874: Add RWDT support
arm64: dts: renesas: ebisu: Enable VIN5
arm64: dts: renesas: r8a774c0-cat874: Add LEDs support
arm64: dts: renesas: r8a774c0-cat874: add RTC support
arm64: dts: renesas: cat875: Add CAN support
arm64: dts: renesas: r8a774c0: Fix cpu nodes style
arm64: dts: renesas: r8a77965: add SSIU support for sound
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:15:49 +0000 (12:15 -0700)]
Merge tag 'v5.2-rockchip-dts64-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
Core new soc features are hdmi-cec for rk3328, scheduler capacity-values
and emmc cleanups for rk3399. New boards are the OrangePi (rk3399) and
NanoPi NEO4. Both the OrangePi as well as the NanoPC/Pie family also
directly got some additional features added after the boards itself.
The Rock960 family (rock960+ficus) got their power-tree cleaned to match
the schematics and also got hdmi-audio and their gpu enabled.
Mali support also got enabled on the RockPi4 and finally both
rk3328-rock64 and rk3328-roc-cc got some additional features.
* tag 'v5.2-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
arm64: dts: rockchip: Decrease emmc-phy's drive impedance on rk3399-puma
arm64: dts: rockchip: Define drive-impedance-ohm for RK3399's emmc-phy.
arm64: dts: rockchip: Disable DCMDs on RK3399's eMMC controller.
arm64: dts: rockchip: Add nanopi4 ethernet phy
arm64: dts: rockchip: Add PWM fan for NanoPC-T4
arm64: dts: rockchip: Add the fusb typec manager to rk3399-orangepi
arm64: dts: rockchip: Specify vid supply for the rk3399-orangepi compass (AK09911)
arm64: dts: rockchip: Fix clock names and add missing supplies for bluetooth on rk3399-orangepi
arm64: dts: rockchip: Add 12V DCIN regulator to rk3399-ficus
arm64: dts: rockchip: Rename vcc_sys into vcc5v0_sys on rk3399-rock960
arm64: dts: rockchip: Add Nanopi NEO4 initial support
arm64: dts: rockchip: enable hdmi audio out for rk3399-rockpro64
arm64: dts: rockchip: Add support for the Orange Pi RK3399 board.
arm64: dts: rockchip: enable mali on rock960 boards
arm64: dts: rockchip: enable mali on Rock Pi 4
arm64: dts: rockchip: add rk3328-roc-cc cpu-supply entries for all cpu nodes
arm64: dts: rockchip: give some life to the rk3328-roc-cc leds
arm64: dts: rockchip: add #sound-dai-cells to HDMI of rk3328
arm64: dts: rockchip: add ir-receiver node on rk3328-rock64
arm64: dts: rockchip: add leds node on rk3328-rock64
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:15:24 +0000 (12:15 -0700)]
Merge tag 'v5.2-rockchip-dts32-1' of git://git./linux/kernel/git/mmind/linux-rockchip into arm/dt
Quite a bit of love for the rk3288-veyron chromeos devices and a number
of cleanups for rk3288 from that area, hdmi support for the old rk3066
a small rv1108-eglin-r1 cleanup and wifi+hdmi-cec for the tinker board.
* tag 'v5.2-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
ARM: dts: rockchip: add rk3066 hdmi nodes
ARM: dts: rockchip: Add device tree for rk3288-veyron-mighty
dt-bindings: ARM: dts: rockchip: Add bindings for rk3288-veyron-mighty
ARM: dts: rockchip: Add vdd_logic to rk3288-veyron
ARM: dts: rockchip: Add dvs-gpios to rk3288-veyron-jerry
ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
dt-bindings: ARM: dts: rockchip: Add rk3288-veyron-jerry rev 10-15
ARM: dts: rockchip: Fix gic/efuse sort ordering for rk3288
ARM: dts: rockchip: Enable WiFi on rk3288-tinker
ARM: dts: rockchip: add grf reference in rk3288 tsadc node
ARM: dts: rockchip: Enable HDMI CEC on rk3288-tinker-s
ARM: dts: rockchip: remove disable-wp from rv1108-elgin-r1 emmc node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:14:29 +0000 (12:14 -0700)]
Merge tag 'amlogic-dt' of https://git./linux/kernel/git/khilman/linux-amlogic into arm/dt
ARM: dts: Amlogic updates for v5.2
- add GPIO line names for odroid-c1 boards
- support internal clock measure driver
* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM: dts: meson8b: odroidc1: add the GPIO line names
ARM: dts: meson8b: add the internal clock measurer
ARM: dts: meson8: add the internal clock measurer
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sun, 28 Apr 2019 19:14:10 +0000 (12:14 -0700)]
Merge tag 'amlogic-dt64' of https://git./linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.2
Highlights
- new board: SEI Robotics 510, based on S905X2 SoC (G12A)
- enable more periphearls for S905X2 based boards
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
arm64: dts: meson-g12a: Add CMA reserved memory
arm64: dts: meson-g12a-x96-max: Enable BT Module
arm64: dts: meson-g12a-x96-max: add regulators
arm64: dts: meson-g12a-sei510: add regulators
arm64: dts: meson-g12a-x96-max: add uart_AO pinctrl
arm64: dts: meson-g12a-sei510: add uart_AO pinctrl
arm64: dts: meson-g12a-u200: add uart_AO pinctrl
arm64: dts: meson: g12a: Add UART A, B & C nodes and pins
arm64: dts: meson: g12a: add reset controller
arm64: dts: meson: g12a: add uart_ao_a pinctrl
arm64: dts: meson: g12a: add pinctrl support controllers
arm64: dts: meson: g12a: Add AO Clock + Reset Controller support
arm64: dts: meson-gxm-nexbox-a1: Enable USB
arm64: dts: meson: g12a: add efuse
arm64: dts: meson: g12a: add secure monitor
arm64: dts: meson-gxl-s905d-phicomm-n1: add status LED
arm64: dts: meson-g12a: Add AO Secure node
arm64: dts: Add SEI Robotics SEI510 Board
vendor-prefixes: Add prefix for Shenzhen SEI Robotics Co., Ltd
Signed-off-by: Olof Johansson <olof@lixom.net>
Manivannan Sadhasivam [Sat, 5 Jan 2019 07:28:58 +0000 (12:58 +0530)]
arm64: dts: hisilicon: hi3670: Add UFS controller support
Add UFS controller support for HiSilicon HI3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Roger Quadros [Mon, 8 Apr 2019 09:42:49 +0000 (12:42 +0300)]
ARM: dts: dra7: Separate AM57 dtsi files
AM5 and DRA7 SoC families have different set of modules
in them so the SoC sepecific dtsi files need to be separated.
e.g. Some of the major differences between AM576 and DRA76
DRA76x AM576x
USB3 x
USB4 x
ATL x
VCP x
MLB x
ISS x
PRU-ICSS1 x
PRU-ICSS2 x
This patch only deals with disabling USB3, USB4 and ATL for
AM57 variants.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Roger Quadros [Fri, 5 Apr 2019 13:28:05 +0000 (16:28 +0300)]
dt-binding: arm: omap: Add information for AM5748
Add DT binding details for AM5748 SoC and AM5748 IDK.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Yannick Fertré [Fri, 29 Mar 2019 12:29:00 +0000 (13:29 +0100)]
ARM: dts: stm32: enable cec on stm32mp157a-dk1 board
Enable CEC (Consumer Electronics Control) device.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Wed, 10 Apr 2019 14:06:27 +0000 (16:06 +0200)]
ARM: dts: stm32: add cec pins muxing on stm32mp157
Add a new pin muxing for cec.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Fri, 29 Mar 2019 12:28:00 +0000 (13:28 +0100)]
ARM: dts: stm32: add ltdc pins muxing on stm32mp157
Add ltdc pins muxing on stm32mp157.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Fri, 29 Mar 2019 10:48:00 +0000 (11:48 +0100)]
ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157
Add I2C sleep pins muxing for low power mode.
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Yannick Fertré [Wed, 10 Apr 2019 13:51:38 +0000 (15:51 +0200)]
ARM: dts: stm32: add power supply of otm8009a on stm32mp157c-dk2
This patch adds a new property (power-supply) to panel otm8009a (orisetech)
on stm32mp157c-dk2 & regulator v3v3.
Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Gabriel Fernandez [Fri, 5 Apr 2019 07:53:00 +0000 (09:53 +0200)]
ARM: dts: stm32: Enable STM32F769 clock driver
This patch enables clocks for STM32F769 boards.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Tue, 9 Apr 2019 09:00:39 +0000 (11:00 +0200)]
ARM: dts: stm32: add stpmic1 support on stm32mp157a dk1 board
This patch adds stpmic1 support on stm32mp157a dk1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Pascal Paillet [Tue, 9 Apr 2019 08:59:49 +0000 (10:59 +0200)]
ARM: dts: stm32: add stpmic1 support on stm32mp157c ed1 board
This patch adds stpmic1 support on stm32mp157c ed1 board.
The STPMIC1 is a PMIC from STMicroelectronics. The STPMIC1 integrates 10
regulators, 3 power switches, a watchdog and an input for a power on key.
The DMAs are disabled because the PMIC generates a very few traffic and
DMA channels may lack for other usage.
Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Olivier Moysan [Fri, 29 Mar 2019 10:12:00 +0000 (11:12 +0100)]
ARM: dts: stm32: add spdfirx pins to stm32mp157c
This patch adds spdifrx support on stm32mp157c eval board.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Olivier Moysan [Wed, 10 Apr 2019 12:47:52 +0000 (14:47 +0200)]
ARM: dts: stm32: add spdifrx support on stm32mp157c
This patch adds support of STM32 SPDIFRX on
stm32mp157c.
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Thu, 28 Feb 2019 10:19:00 +0000 (11:19 +0100)]
ARM: dts: stm32: Add romem and temperature calibration on stm32f429
Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Thu, 28 Feb 2019 10:19:00 +0000 (11:19 +0100)]
ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells. Non-volatile calibration data is made available by
stm32mp157c bootrom in bsec_dataX registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabrice Gasnier [Wed, 12 Dec 2018 08:48:00 +0000 (09:48 +0100)]
ARM: dts: stm32: Add clock on stm32mp157c syscfg
STM32 syscfg needs a clock to access registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabien Dessenne [Fri, 1 Mar 2019 09:18:00 +0000 (10:18 +0100)]
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157a-dk1
Enable STM32 IPCC mailbox driver for STM32MP157a-dk1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabien Dessenne [Fri, 1 Mar 2019 09:18:00 +0000 (10:18 +0100)]
ARM: dts: stm32: enable IPCC mailbox support on STM32MP157c-ed1
Enable STM32 IPCC mailbox driver for STM32MP157c-ed1 board.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Fabien Dessenne [Fri, 1 Mar 2019 09:18:00 +0000 (10:18 +0100)]
ARM: dts: stm32: add IPCC mailbox support on STM32MP157c
Add configuration on DT for IPCC mailbox driver.
Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Fri, 1 Mar 2019 08:47:00 +0000 (09:47 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32mp157a dk1 board
This patch adds sdmmc1 support on stm32mp157a dk1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Tue, 26 Mar 2019 11:01:52 +0000 (12:01 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 board
This patch adds sdmmc1 support on stm32mp157c ed1 board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Fri, 1 Mar 2019 08:47:00 +0000 (09:47 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32mp157c
This patch adds support of sdmmc1 on stm32mp157c.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Fri, 1 Mar 2019 08:47:00 +0000 (09:47 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32h743i disco board
This patch adds sdmmc1 support on stm32h743i disco board.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Fri, 1 Mar 2019 08:47:00 +0000 (09:47 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32h743i eval board
This patch adds sdmmc1 support on stm32h743i eval board.
This board has an external driver to control signal direction polarity.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Ludovic Barre [Fri, 1 Mar 2019 08:47:00 +0000 (09:47 +0100)]
ARM: dts: stm32: add sdmmc1 support on stm32h743
This patch adds support of sdmmc1 on stm32h743.
Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Krzysztof Kozlowski [Mon, 8 Apr 2019 05:19:26 +0000 (07:19 +0200)]
ARM: dts: exynos: Remove console argument from bootargs
Remove the "console=ttySAC..." argument from DTSes having a proper
stdout-path property. To make the code functionally equivalent, add the
serial port baud rate and parity.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Krzysztof Kozlowski [Mon, 8 Apr 2019 05:19:25 +0000 (07:19 +0200)]
ARM: dts: exynos: Use stdout-path property instead of console in bootargs
Replacing bootargs with stdout-path property in chosen node allows using
early console by adding just 'earlycon' parameter to the kernel command
line.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Andrew F. Davis [Fri, 29 Mar 2019 18:13:13 +0000 (13:13 -0500)]
ARM: dts: omap2420-n810: Use new CODEC reset pin name
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Andrew F. Davis [Fri, 29 Mar 2019 17:53:34 +0000 (12:53 -0500)]
ARM: dts: am43xx-epos-evm: Add matrix keypad as wakeup source
Mark matrix-keypad as a wakeup source.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Mike Erdahl [Fri, 29 Mar 2019 17:53:33 +0000 (12:53 -0500)]
ARM: dts: am43xx-epos-evm: Keep DCDC3 regulator on in suspend to memory
When going to suspend to ram mode (or rtc-only mode), the DDR regulator
must be told to stay on, else this rail will go down when the PMIC_EN
signal is deasserted.
Signed-off-by: Mike Erdahl <m-erdahl@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kabir Sahane [Fri, 29 Mar 2019 17:53:32 +0000 (12:53 -0500)]
ARM: dts: am43xx-epos-evm: Keep DCDC5 and DCDC6 always on
These regulator outputs are needed even in deep sleep modes to prevent
low-voltage detection events. Make these always ON to avoid this.
Signed-off-by: Kabir Sahane <x0153567@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Kishon Vijay Abraham I [Mon, 25 Mar 2019 09:45:25 +0000 (15:15 +0530)]
ARM: dts: dra7: Add properties to enable PCIe x2 lane mode
ti,syscon-lane-sel and ti,syscon-lane-conf properties specific to enable
PCIe x2 lane mode are added here.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
John Stultz [Thu, 4 Apr 2019 08:16:28 +0000 (01:16 -0700)]
arm64: dts: hi3660: Fixup unofficial dma-min-chan to dma-channel-mask
A undocumented and unimplemented binding got into the hi3660
dtsi, and this switches that binding to the now documented one.
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Youlin Wang [Thu, 4 Apr 2019 08:16:27 +0000 (01:16 -0700)]
arm64: dts: hi3660: Add hisi asp dma device
Add asp-dma device to hi3660 dts
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Youlin Wang <wwx575822@notesmail.huawei.com>
Signed-off-by: Tanglei Han <hantanglei@huawei.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
John Stultz [Thu, 4 Apr 2019 08:16:26 +0000 (01:16 -0700)]
arm64: dts: hi3660: Add dma to uart nodes
Try to add DMA support to the uart nodes following
the assignments made in the dts from the victoria vendor kernel
here:
https://consumer.huawei.com/en/opensource/detail/?siteCode=worldwide&keywords=p10&fileType=openSourceSoftware&pageSize=10&curPage=1
Cc: Tanglei Han <hantanglei@huawei.com>
Cc: Zhuangluan Su <suzhuangluan@hisilicon.com>
Cc: Ryan Grachek <ryan@edited.us>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Wei Xu <xuwei5@hisilicon.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: devicetree@vger.kernel.org
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Thu, 28 Feb 2019 15:45:11 +0000 (21:15 +0530)]
arm64: dts: hisilicon: hikey970: Add SD and WiFi support
Add SD and WiFi support for HiKey970 board based on HI3670 SoC. Due to
the absence of the PMIC driver, fixed regulators are sourced to make the
driver working.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Thu, 28 Feb 2019 15:45:10 +0000 (21:15 +0530)]
arm64: dts: hisilicon: hi3670: Add MMC controller support
Add MMC controller support for HiSilicon HI3670 SoC reusing the HI3660
Designware MMC driver. There are 2 DWMMC controllers present in this SoC:
1. DWMMC1 is used for SD card (SD)
2. DWMMC2 is used for WiFi (SDIO)
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Thu, 28 Feb 2019 15:45:09 +0000 (21:15 +0530)]
dt-bindings: mmc: Add HI3670 MMC controller binding
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same
K3 specific designware driver is reused for HI3670 SoC and the binding
is documented with fallback approach for compatible property.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 15 Feb 2019 05:49:55 +0000 (11:19 +0530)]
arm64: dts: hisilicon: hi3670: Add reset controller support
Add reset controller support for HiSilicon HI3670 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Manivannan Sadhasivam [Fri, 15 Feb 2019 05:49:54 +0000 (11:19 +0530)]
dt-bindings: reset: Add HI3670 reset controller binding
HI3670 SoC is architecturally same as the HI3660 SoC. Hence, the same
driver is reused for HI3670 SoC and the binding is documented here which
uses the fallback approach.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Joel Stanley [Wed, 3 Oct 2018 12:35:07 +0000 (14:35 +0200)]
ARM: dts: aspeed: Add RTC node
The ASPEED ast2400 and ast2500 both contain an on board RTC device.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Edward A. James [Wed, 3 Apr 2019 16:59:11 +0000 (11:59 -0500)]
ARM: dts: aspeed: witherspoon: Update BMC partitioning
Add simplified partitions for BMC and alternate flash. Include these by
default in Witherspoon.
Signed-off-by: Edward A. James <eajames@us.ibm.com>
Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Tao Ren [Tue, 5 Feb 2019 22:46:19 +0000 (14:46 -0800)]
ARM: dts: aspeed: cmm: enable iio-hwmon-adc
Bind aspeed ADC channels 0-7 to "iio-hwmon" driver so the data of these
voltage sensing channels can be accessed by "lm_sensors". Channels 8-15
are not used on CMM BMC.
Signed-off-by: Tao Ren <taoren@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Vijay Khemka [Wed, 30 Jan 2019 18:14:26 +0000 (10:14 -0800)]
ARM: dts: aspeed: tiogapass: Enable VUART
Enabling vuart for Facebook tiogapass
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Eddie James [Tue, 2 Apr 2019 18:25:04 +0000 (18:25 +0000)]
ARM: dts: aspeed-g5: Add video engine
Add a node to describe the video engine on the AST2500.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Thu, 19 Apr 2018 04:20:03 +0000 (13:50 +0930)]
ARM: dts: aspeed: Enable the GFX IP
The GFX controller is the internal graphics device used by the SoC
(opposed to the one connected via the PCIe device and used by the host).
This configures it with a framebuffer region and adds it to the command
line so kernel boot messages appear on the display.
Enabled for Romulus, Witherspoon, and the ASPEED AST2500 EVB.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Thu, 19 Apr 2018 04:20:02 +0000 (13:50 +0930)]
ARM: dts: aspeed-g5: Add resets and clocks to GFX node
The ast2500 has a reset for the CRT device that must be deasserted
before it can be used. Similarly it has a clock gate for a clock called
D1CLK that must be set to running.
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Eddie James [Thu, 21 Mar 2019 19:30:09 +0000 (14:30 -0500)]
ARM: dts: aspeed: witherspoon: Enable vhub
Enable the virtual USB hub.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Lei YU [Fri, 15 Feb 2019 07:47:21 +0000 (15:47 +0800)]
ARM: dts: aspeed: palmetto: Fix flash_memory region
The flash_memory region was incorrect and exceeds AST2400's RAM range.
Fix it by putting it before coldfire region, and aligned with 32MiB.
Signed-off-by: Lei YU <mine260309@gmail.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Joel Stanley [Mon, 18 Dec 2017 06:16:00 +0000 (16:46 +1030)]
ARM: dts: aspeed: ast2500: Update flash layout
Move to the openbmc-flash-layout.dtsi file.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Linus Torvalds [Sun, 31 Mar 2019 21:39:29 +0000 (14:39 -0700)]
Linux 5.1-rc3
Linus Torvalds [Sun, 31 Mar 2019 15:55:59 +0000 (08:55 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"A collection of x86 and ARM bugfixes, and some improvements to
documentation.
On top of this, a cleanup of kvm_para.h headers, which were exported
by some architectures even though they not support KVM at all. This is
responsible for all the Kbuild changes in the diffstat"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
Documentation: kvm: clarify KVM_SET_USER_MEMORY_REGION
KVM: doc: Document the life cycle of a VM and its resources
KVM: selftests: complete IO before migrating guest state
KVM: selftests: disable stack protector for all KVM tests
KVM: selftests: explicitly disable PIE for tests
KVM: selftests: assert on exit reason in CR4/cpuid sync test
KVM: x86: update %rip after emulating IO
x86/kvm/hyper-v: avoid spurious pending stimer on vCPU init
kvm/x86: Move MSR_IA32_ARCH_CAPABILITIES to array emulated_msrs
KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hosts
kvm: don't redefine flags as something else
kvm: mmu: Used range based flushing in slot_handle_level_range
KVM: export <linux/kvm_para.h> and <asm/kvm_para.h> iif KVM is supported
KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()
kvm: nVMX: Add a vmentry check for HOST_SYSENTER_ESP and HOST_SYSENTER_EIP fields
KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)
KVM: Reject device ioctls from processes other than the VM's creator
KVM: doc: Fix incorrect word ordering regarding supported use of APIs
KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'
KVM: nVMX: Do not inherit quadrant and invalid for the root shadow EPT
...
Linus Torvalds [Sun, 31 Mar 2019 15:40:15 +0000 (08:40 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A pile of x86 updates:
- Prevent exceeding he valid physical address space in the /dev/mem
limit checks.
- Move all header content inside the header guard to prevent compile
failures.
- Fix the bogus __percpu annotation in this_cpu_has() which makes
sparse very noisy.
- Disable switch jump tables completely when retpolines are enabled.
- Prevent leaking the trampoline address"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/realmode: Make set_real_mode_mem() static inline
x86/cpufeature: Fix __percpu annotation in this_cpu_has()
x86/mm: Don't exceed the valid physical address space
x86/retpolines: Disable switch jump tables when retpolines are enabled
x86/realmode: Don't leak the trampoline kernel address
x86/boot: Fix incorrect ifdeffery scope
x86/resctrl: Remove unused variable
Linus Torvalds [Sun, 31 Mar 2019 15:37:04 +0000 (08:37 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Core libraries:
- Fix max perf_event_attr.precise_ip detection.
- Fix parser error for uncore event alias
- Fixup ordering of kernel maps after obtaining the main kernel map
address.
Intel PT:
- Fix TSC slip where A TSC packet can slip past MTC packets so that
the timestamp appears to go backwards.
- Fixes for exported-sql-viewer GUI conversion to python3.
ARM coresight:
- Fix the build by adding a missing case value for enumeration value
introduced in newer library, that now is the required one.
tool headers:
- Syncronize kernel headers with the kernel, getting new io_uring and
pidfd_send_signal syscalls so that 'perf trace' can handle them"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu: Fix parser error for uncore event alias
perf scripts python: exported-sql-viewer.py: Fix python3 support
perf scripts python: exported-sql-viewer.py: Fix never-ending loop
perf machine: Update kernel map address and re-order properly
tools headers uapi: Sync powerpc's asm/kvm.h copy with the kernel sources
tools headers: Update x86's syscall_64.tbl and uapi/asm-generic/unistd
tools headers uapi: Update drm/i915_drm.h
tools arch x86: Sync asm/cpufeatures.h with the kernel sources
tools headers uapi: Sync linux/fcntl.h to get the F_SEAL_FUTURE_WRITE addition
tools headers uapi: Sync asm-generic/mman-common.h and linux/mman.h
perf evsel: Fix max perf_event_attr.precise_ip detection
perf intel-pt: Fix TSC slip
perf cs-etm: Add missing case value
Johan Jonker [Sat, 30 Mar 2019 09:56:38 +0000 (10:56 +0100)]
ARM: dts: rockchip: enable vop0 and hdmi nodes to rk3066a-mk808
This patch enables the vop0 and hdmi nodes
for a MK808 with rk3066 processor.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Zheng Yang [Sat, 30 Mar 2019 09:56:37 +0000 (10:56 +0100)]
ARM: dts: rockchip: add rk3066 hdmi nodes
This patch adds the hdmi nodes to rk3066.
Signed-off-by: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Linus Torvalds [Sun, 31 Mar 2019 15:22:12 +0000 (08:22 -0700)]
Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull CPU hotplug fixes from Thomas Gleixner:
"Two SMT/hotplug related fixes:
- Prevent crash when HOTPLUG_CPU is disabled and the CPU bringup
aborts. This is triggered with the 'nosmt' command line option, but
can happen by any abort condition. As the real unplug code is not
compiled in, prevent the fail by keeping the CPU in zombie state.
- Enforce HOTPLUG_CPU for SMP on x86 to avoid the above situation
completely. With 'nosmt' being a popular option it's required to
unplug the half brought up sibling CPUs (due to the MCE wreckage)
completely"
* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/smp: Enforce CONFIG_HOTPLUG_CPU when SMP=y
cpu/hotplug: Prevent crash when CPU bringup fails on CONFIG_HOTPLUG_CPU=n
Linus Torvalds [Sun, 31 Mar 2019 14:48:58 +0000 (07:48 -0700)]
Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking fixlet from Thomas Gleixner:
"Trivial update to the maintainers file"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove deleted file from futex file pattern
Linus Torvalds [Sun, 31 Mar 2019 14:47:21 +0000 (07:47 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"A small set of core updates:
- Make the watchdog respect the selected CPU mask again. That was
broken by the rework of the watchdog thread management and caused
inconsistent state and NMI watchdog being unstoppable.
- Ensure that the objtool build can find the libelf location.
- Remove dead kcore stub code"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
watchdog: Respect watchdog cpumask on CPU hotplug
objtool: Query pkg-config for libelf location
proc/kcore: Remove unused kclist_add_remap()
Linus Torvalds [Sun, 31 Mar 2019 14:44:13 +0000 (07:44 -0700)]
Merge tag 'powerpc-5.1-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Three non-regression fixes.
- Our optimised memcmp could read past the end of one of the buffers
and potentially trigger a page fault leading to an oops.
- Some of our code to read energy management data on PowerVM had an
endian bug leading to bogus results.
- When reporting a machine check exception we incorrectly reported
TLB multihits as D-Cache multhits due to a missing entry in the
array of causes.
Thanks to: Chandan Rajendra, Gautham R. Shenoy, Mahesh Salgaonkar,
Segher Boessenkool, Vaidyanathan Srinivasan"
* tag 'powerpc-5.1-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries/mce: Fix misleading print for TLB mutlihit
powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexes
powerpc/64: Fix memcmp reading past the end of src/dest
Linus Torvalds [Sun, 31 Mar 2019 14:42:39 +0000 (07:42 -0700)]
Merge tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
- Revert "dmaengine: stm32-mdma: Add a check on read_u32_array" as that
caused regression
- Fix MAINTAINER file uniphier-mdmac.c file path
* tag 'dmaengine-fix-5.1-rc3' of git://git.infradead.org/users/vkoul/slave-dma:
MAINTAINERS: Fix uniphier-mdmac.c file path
dmaengine: stm32-mdma: Revert "dmaengine: stm32-mdma: Add a check on read_u32_array"
Linus Torvalds [Sat, 30 Mar 2019 19:12:56 +0000 (12:12 -0700)]
Merge tag 'led-fixes-for-5.1-rc3' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED fixes from Jacek Anaszewski:
- fix refcnt leak on interface rename
- use memcpy in device_name_store() to avoid including garbage from a
previous, longer value in the device_name
- fix a potential NULL pointer dereference in case of_match_device()
cannot find a match
* tag 'led-fixes-for-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: trigger: netdev: use memcpy in device_name_store
leds: pca9532: fix a potential NULL pointer dereference
leds: trigger: netdev: fix refcnt leak on interface rename
Linus Torvalds [Sat, 30 Mar 2019 18:33:34 +0000 (11:33 -0700)]
Merge tag 'gpio-v5.1-2' of git://git./linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"As you can see [in the git history] I was away on leave and Bartosz
kindly stepped in and collected a slew of fixes, I pulled them into my
tree in two sets and merged some two more fixes (fixing my own caused
bugs) on top.
Summary:
- Revert the extended use of gpio_set_config() and think about how we
can do this properly.
- Fix up the SPI CS GPIO handling so it now works properly on the SPI
bus children, as intended.
- Error paths and driver fixes"
* tag 'gpio-v5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: mockup: use simple_read_from_buffer() in debugfs read callback
gpio: of: Fix of_gpiochip_add() error path
gpio: of: Check for "spi-cs-high" in child instead of parent node
gpio: of: Check propname before applying "cs-gpios" quirks
gpio: mockup: fix debugfs read
Revert "gpio: use new gpio_set_config() helper in more places"
gpio: aspeed: fix a potential NULL pointer dereference
gpio: amd-fch: Fix bogus SPDX identifier
gpio: adnp: Fix testing wrong value in adnp_gpio_direction_input
gpio: exar: add a check for the return value of ida_simple_get fails
Rasmus Villemoes [Thu, 14 Mar 2019 14:06:14 +0000 (15:06 +0100)]
leds: trigger: netdev: use memcpy in device_name_store
If userspace doesn't end the input with a newline (which can easily
happen if the write happens from a C program that does write(fd,
iface, strlen(iface))), we may end up including garbage from a
previous, longer value in the device_name. For example
# cat device_name
# printf 'eth12' > device_name
# cat device_name
eth12
# printf 'eth3' > device_name
# cat device_name
eth32
I highly doubt anybody is relying on this behaviour, so switch to
simply copying the bytes (we've already checked that size is <
IFNAMSIZ) and unconditionally zero-terminate it; of course, we also
still have to strip a trailing newline.
This is also preparation for future patches.
Fixes:
06f502f57d0d ("leds: trigger: Introduce a NETDEV trigger")
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Kangjie Lu [Sat, 9 Mar 2019 06:04:11 +0000 (00:04 -0600)]
leds: pca9532: fix a potential NULL pointer dereference
In case of_match_device cannot find a match, return -EINVAL to avoid
NULL pointer dereference.
Fixes:
fa4191a609f2 ("leds: pca9532: Add device tree support")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Linus Torvalds [Sat, 30 Mar 2019 17:35:20 +0000 (10:35 -0700)]
Merge tag 'staging-5.1-rc3' of git://git./linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for 5.1-rc3, and one driver
removal.
The biggest thing here is the removal of the mt7621-eth driver as a
"real" network driver was merged in 5.1-rc1 for this hardware, so this
old driver can now be removed.
Other than that, there are just a number of small fixes, all resolving
reported issues and some potential corner cases for error handling
paths.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vt6655: Remove vif check from vnt_interrupt
staging: erofs: keep corrupted fs from crashing kernel in erofs_readdir()
staging: octeon-ethernet: fix incorrect PHY mode
staging: vc04_services: Fix an error code in vchiq_probe()
staging: erofs: fix error handling when failed to read compresssed data
staging: vt6655: Fix interrupt race condition on device start up.
staging: rtlwifi: Fix potential NULL pointer dereference of kzalloc
staging: rtl8712: uninitialized memory in read_bbreg_hdl()
staging: rtlwifi: rtl8822b: fix to avoid potential NULL pointer dereference
staging: rtl8188eu: Fix potential NULL pointer dereference of kcalloc
staging, mt7621-pci: fix build without pci support
staging: speakup_soft: Fix alternate speech with other synths
staging: axis-fifo: add CONFIG_OF dependency
staging: olpc_dcon_xo_1: add missing 'const' qualifier
staging: comedi: ni_mio_common: Fix divide-by-zero for DIO cmdtest
staging: erofs: fix to handle error path of erofs_vmap()
staging: mt7621-dts: update ethernet settings.
staging: remove mt7621-eth
Linus Torvalds [Sat, 30 Mar 2019 17:30:38 +0000 (10:30 -0700)]
Merge tag 'tty-5.1-rc3' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 5.1-rc3.
Nothing major here, just a number of potential problems fixes for
error handling paths, as well as some other minor bugfixes for
reported issues with 5.1-rc1.
All of these have been in linux-next with no reported issues"
* tag 'tty-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix NULL pointer issue when tty_port ops is not set
Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdboc
dt-bindings: serial: Add compatible for Mediatek MT8183
tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stopped
tty/serial: atmel: Add is_half_duplex helper
serial: sh-sci: Fix setting SCSCR_TIE while transferring data
serial: ar933x_uart: Fix build failure with disabled console
tty: serial: qcom_geni_serial: Initialize baud in qcom_geni_console_setup
sc16is7xx: missing unregister/delete driver on error in sc16is7xx_init()
tty: mxs-auart: fix a potential NULL pointer dereference
tty: atmel_serial: fix a potential NULL pointer dereference
serial: max310x: Fix to avoid potential NULL pointer dereference
serial: mvebu-uart: Fix to avoid a potential NULL pointer dereference
Linus Torvalds [Sat, 30 Mar 2019 17:26:36 +0000 (10:26 -0700)]
Merge tag 'usb-5.1-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.1-rc3.
Nothing major at all here, just a small collection of fixes for
reported issues, and potential problems with error handling paths.
Also a few new device ids, as normal.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Olicard 600
USB: serial: cp210x: add new device id
usb: u132-hcd: fix resource leak
usb: cdc-acm: fix race during wakeup blocking TX traffic
usb: mtu3: fix EXTCON dependency
usb: usb251xb: fix to avoid potential NULL pointer dereference
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails
phy: sun4i-usb: Support set_mode to USB_HOST for non-OTG PHYs
xhci: Don't let USB3 ports stuck in polling state prevent suspend
usb: xhci: dbc: Don't free all memory with spinlock held
xhci: Fix port resume done detection for SS ports with LPM enabled
USB: serial: mos7720: fix mos_parport refcount imbalance on error path
USB: gadget: f_hid: fix deadlock in f_hidg_write()
usb: gadget: net2272: Fix net2272_dequeue()
usb: gadget: net2280: Fix net2280_dequeue()
usb: gadget: net2280: Fix overrun of OUT messages
usb: dwc3: pci: add support for Comet Lake PCH ID
usb: usb251xb: Remove unnecessary comparison of unsigned integer with >= 0
usb: common: Consider only available nodes for dr_mode
usb: typec: tcpm: Try PD-2.0 if sink does not respond to 3.0 source-caps
...
Linus Torvalds [Sat, 30 Mar 2019 17:09:11 +0000 (10:09 -0700)]
Merge tag 'acpi-5.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"This corrects a previous attempt to make Linux use its own set of ACPI
debug flags different from the upstream ACPICA's default (Erik
Schmauss)"
* tag 'acpi-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: use different default debug value than ACPICA
Linus Torvalds [Sat, 30 Mar 2019 17:06:09 +0000 (10:06 -0700)]
Merge tag 'pm-5.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix CPU base frequency reporting in the intel_pstate driver and
a use-after-free in the scpi-cpufreq driver.
Specifics:
- Fix the ACPI CPPC library to actually follow the specification when
decoding the guaranteed performance register information and make
the intel_pstate driver to fall back to the nominal frequency when
reporting the base frequency if the guaranteed performance register
information is not there (Srinivas Pandruvada).
- Fix use-after-free in the exit callback of the scpi-cpufreq left
after an update during the 5.0 development cycle (Vincent Stehlé)"
* tag 'pm-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi: Fix use after free
cpufreq: intel_pstate: Also use CPPC nominal_perf for base_frequency
ACPI / CPPC: Fix guaranteed performance handling
Linus Torvalds [Sat, 30 Mar 2019 16:19:09 +0000 (09:19 -0700)]
Merge branch 'fixes-v5.1-a' of git://git./linux/kernel/git/jmorris/linux-security
Pull security layer fixes from James Morris:
"Yama and LSM config fixes"
* 'fixes-v5.1-a' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Yama: mark local symbols as static
Linus Torvalds [Fri, 29 Mar 2019 23:02:28 +0000 (16:02 -0700)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"22 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (22 commits)
fs/proc/proc_sysctl.c: fix NULL pointer dereference in put_links
fs: fs_parser: fix printk format warning
checkpatch: add %pt as a valid vsprintf extension
mm/migrate.c: add missing flush_dcache_page for non-mapped page migrate
drivers/block/zram/zram_drv.c: fix idle/writeback string compare
mm/page_isolation.c: fix a wrong flag in set_migratetype_isolate()
mm/memory_hotplug.c: fix notification in offline error path
ptrace: take into account saved_sigmask in PTRACE{GET,SET}SIGMASK
fs/proc/kcore.c: make kcore_modules static
include/linux/list.h: fix list_is_first() kernel-doc
mm/debug.c: fix __dump_page when mapping->host is not set
mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified
include/linux/hugetlb.h: convert to use vm_fault_t
iommu/io-pgtable-arm-v7s: request DMA32 memory, and improve debugging
mm: add support for kmem caches in DMA32 zone
ocfs2: fix inode bh swapping mixup in ocfs2_reflink_inodes_lock
mm/hotplug: fix offline undo_isolate_page_range()
fs/open.c: allow opening only regular files during execve()
mailmap: add Changbin Du
mm/debug.c: add a cast to u64 for atomic64_read()
...
Linus Torvalds [Fri, 29 Mar 2019 22:44:11 +0000 (15:44 -0700)]
Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Use memblock_alloc() instead of memblock_alloc_low() in
request_standard_resources(), the latter being limited to the low 4G
memory range on arm64"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: replace memblock_alloc_low with memblock_alloc
Linus Torvalds [Fri, 29 Mar 2019 22:37:10 +0000 (15:37 -0700)]
Merge tag 'iommu-fixes-v5.1-rc3' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
- Fix a bug in the AMD IOMMU driver not handling exclusion ranges
correctly. In fact the driver did not reserve these ranges for IOVA
allocations, so that dma-handles could be allocated in an exclusion
range, leading to data corruption. Exclusion ranges have not been
used by any firmware up to now, so this issue remained undiscovered
for quite some time.
- Fix wrong warning messages that the IOMMU core code prints when it
tries to allocate the default domain for an iommu group and the
driver does not support any of the default domain types (like Intel
VT-d).
* tag 'iommu-fixes-v5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Reserve exclusion range in iova-domain
iommu: Don't print warning when IOMMU driver only supports unmanaged domains
Linus Torvalds [Fri, 29 Mar 2019 22:07:29 +0000 (15:07 -0700)]
Merge tag 'driver-core-5.1-rc3' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single driver core patch for 5.1-rc3.
After 5.1-rc1, all of the users of BUS_ATTR() are finally removed, so
we can now drop this macro from include/linux/device.h so that no more
new users will be created.
This patch has been in linux-next for a while, with no reported
issues"
* tag 'driver-core-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: remove BUS_ATTR()
Linus Torvalds [Fri, 29 Mar 2019 22:03:30 +0000 (15:03 -0700)]
Merge tag 'char-misc-5.1-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some binder, habanalabs, and vboxguest driver fixes for
5.1-rc3.
The Binder fixes resolve some reported issues found by testing, first
by the selinux developers, and then earlier today by syzbot.
The habanalabs fixes are all minor, resolving a number of tiny things.
The vboxguest patches are a bit larger. They resolve the fact that
virtual box decided to change their api in their latest release in a
way that broke the existing kernel code, despite saying that they were
never going to do that. So this is a bit of a "new feature", but is
good to get merged so that 5.1 will work with the latest release. The
changes are not large and of course virtual box "swears" they will not
break this again, but no one is holding their breath here.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.x
binder: fix race between munmap() and direct reclaim
binder: fix BUG_ON found by selinux-testsuite
habanalabs: cast to expected type
habanalabs: prevent host crash during suspend/resume
habanalabs: perform accounting for active CS
habanalabs: fix mapping with page size bigger than 4KB
habanalabs: complete user context cleanup before hard reset
habanalabs: fix bug when mapping very large memory area
habanalabs: fix MMU number of pages calculation
Linus Torvalds [Fri, 29 Mar 2019 21:58:49 +0000 (14:58 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Thirteen fixes, seven of which are for IBM fibre channel and three
additional for fairly serious bugs in drivers (qla2xxx, mpt3sas,
aacraid).
Of the three core fixes, the most significant is probably the missed
run queue causing an indefinite hang. The others are fixing a
potential use after free on device close and silencing an incorrect
warning"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ibmvfc: Clean up transport events
scsi: ibmvfc: Byte swap status and error codes when logging
scsi: ibmvfc: Add failed PRLI to cmd_status lookup array
scsi: ibmvfc: Remove "failed" from logged errors
scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN
scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices
scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host
scsi: sd: Quiesce warning if device does not report optimal I/O size
scsi: sd: Fix a race between closing an sd device and sd I/O
scsi: core: Run queue when state is set to running after being blocked
scsi: qla4xxx: fix a potential NULL pointer dereference
scsi: aacraid: Insure we don't access PCIe space during AER/EEH
scsi: mpt3sas: Fix kernel panic during expander reset
Linus Torvalds [Fri, 29 Mar 2019 21:56:53 +0000 (14:56 -0700)]
Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A new ID for the i801 driver and some Documentation fixes to make it
easier for people to find the bindings (which is also a basis for
further improvements in that area)"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: wmt: make bindings file name match the driver
i2c: sun6i-p2wi: make bindings file name match the driver
i2c: stu300: make bindings file name match the driver
i2c: mt65xx: make bindings file name match the driver
i2c: iop3xx: make bindings file name match the driver
i2c: i801: Add support for Intel Comet Lake
Linus Torvalds [Fri, 29 Mar 2019 21:53:33 +0000 (14:53 -0700)]
Merge tag 'sound-5.1-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The important fixes at this time are a couple fixes in ALSA core: a
fix for PCM is about the OOB access in PCM OSS plugins that has been
for long time, but hasn't hit so often until now just because we
allocated a large buffer via vmalloc(), and surfaced more often after
switching to kvmalloc(). Another fix is for a long-standing PCM
problem wrt racy PM resume.
Others are trivial nospec coverage and usual HD-audio quirks"
* tag 'sound-5.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix speakers on Acer Predator Helios 500 Ryzen laptops
ALSA: pcm: Don't suspend stream in unrecoverable PCM state
ALSA: hda/ca0132 - Simplify alt firmware loading code
ALSA: pcm: Fix possible OOB access in PCM oss plugins
ALSA: hda/realtek: Enable headset MIC of ASUS X430UN and X512DK with ALC256
ALSA: hda/realtek: Enable headset mic of ASUS P5440FF with ALC256
ALSA: hda/realtek: Enable ASUS X441MB and X705FD headset MIC with ALC256
ALSA: hda/realtek - Add support for Acer Aspire E5-523G/ES1-432 headset mic
ALSA: hda/realtek: Enable headset MIC of Acer Aspire Z24-890 with ALC286
ALSA: seq: oss: Fix Spectre v1 vulnerability
ALSA: rawmidi: Fix potential Spectre v1 vulnerability
Linus Torvalds [Fri, 29 Mar 2019 21:46:00 +0000 (14:46 -0700)]
Merge tag 'kbuild-fixes-v5.1' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove harmful -Oz option of Clang
- Get back the original behavior (no recursion for in-tree build) for
GNU Make 4.x
- Some minor fixes for coccinelle patches
- Do not overwrite .gitignore in the output directory in case it is
version-controlled
- Fix missed record-mcount bug for dynamic ftrace
- Fix endianness bug in modversions for relative CRC
- Cater to '^H' key code in Kconfig ncurses programs
* tag 'kbuild-fixes-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig/[mn]conf: handle backspace (^H) key
kbuild: modversions: Fix relative CRC byte order interpretation
scripts: coccinelle: Fix description of badty.cocci
kbuild: strip whitespace in cmd_record_mcount findstring
kbuild: do not overwrite .gitignore in output directory
kbuild: skip parsing pre sub-make code for recursion
coccinelle: put_device: reduce false positives
kbuild: skip sub-make for in-tree build with GNU Make 4.x
Revert "kbuild: use -Oz instead of -Os when using clang"
Linus Torvalds [Fri, 29 Mar 2019 21:43:07 +0000 (14:43 -0700)]
Merge tag 'for-linus-
20190329' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Small set of fixes that should go into this series. This contains:
- compat signal mask fix for io_uring (Arnd)
- EAGAIN corner case for direct vs buffered writes for io_uring
(Roman)
- NVMe pull request from Christoph with various little fixes
- sbitmap ws_active fix, which caused a perf regression for shared
tags (me)
- sbitmap bit ordering fix (Ming)
- libata on-stack DMA fix (Raymond)"
* tag 'for-linus-
20190329' of git://git.kernel.dk/linux-block:
nvmet: fix error flow during ns enable
nvmet: fix building bvec from sg list
nvme-multipath: relax ANA state check
nvme-tcp: fix an endianess miss-annotation
libata: fix using DMA buffers on stack
io_uring: offload write to async worker in case of -EAGAIN
sbitmap: order READ/WRITE freed instance and setting clear bit
blk-mq: fix sbitmap ws_active for shared tags
io_uring: fix big-endian compat signal mask handling
blk-mq: update comment for blk_mq_hctx_has_pending()
blk-mq: use blk_mq_put_driver_tag() to put tag
Linus Torvalds [Fri, 29 Mar 2019 21:41:09 +0000 (14:41 -0700)]
Merge tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to avoid choking on multipage bvecs in the messenger and a
small use-after-free fix"
* tag 'ceph-for-5.1-rc3' of git://github.com/ceph/ceph-client:
ceph: fix use-after-free on symlink traversal
libceph: fix breakage caused by multipage bvecs
Linus Torvalds [Fri, 29 Mar 2019 21:36:57 +0000 (14:36 -0700)]
Merge tag 'xfs-5.1-fixes-1' of git://git./fs/xfs/xfs-linux
Pull xfs fixes from Darrick Wong:
"Here are a few fixes for some corruption bugs and uninitialized
variable problems. The few patches here have gone through a few days
worth of fstest runs with no new problems observed.
Changes since last update:
- Fix a bunch of static checker complaints about uninitialized
variables and insufficient range checks.
- Avoid a crash when incore extent map data are corrupt.
- Disallow FITRIM when we haven't recovered the log and know the
metadata are stale.
- Fix a data corruption when doing unaligned overlapping dio writes"
* tag 'xfs-5.1-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: serialize unaligned dio writes against all other dio writes
xfs: prohibit fstrim in norecovery mode
xfs: always init bma in xfs_bmapi_write
xfs: fix btree scrub checking with regards to root-in-inode
xfs: dabtree scrub needs to range-check level
xfs: don't trip over uninitialized buffer on extent read of corrupted inode
Neil Armstrong [Wed, 27 Mar 2019 10:21:57 +0000 (11:21 +0100)]
arm64: dts: meson-g12a: Add CMA reserved memory
In order to handle Video Output and later on Video decoding,
add a reserved CMA pool with a similar 256MiB size as other SoCs.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Kees Cook [Fri, 29 Mar 2019 19:36:04 +0000 (12:36 -0700)]
LSM: Revive CONFIG_DEFAULT_SECURITY_* for "make oldconfig"
Commit
70b62c25665f636c ("LoadPin: Initialize as ordered LSM") removed
CONFIG_DEFAULT_SECURITY_{SELINUX,SMACK,TOMOYO,APPARMOR,DAC} from
security/Kconfig and changed CONFIG_LSM to provide a fixed ordering as a
default value. That commit expected that existing users (upgrading from
Linux 5.0 and earlier) will edit CONFIG_LSM value in accordance with
their CONFIG_DEFAULT_SECURITY_* choice in their old kernel configs. But
since users might forget to edit CONFIG_LSM value, this patch revives
the choice (only for providing the default value for CONFIG_LSM) in order
to make sure that CONFIG_LSM reflects CONFIG_DEFAULT_SECURITY_* from their
old kernel configs.
Note that since TOMOYO can be fully stacked against the other legacy
major LSMs, when it is selected, it explicitly disables the other LSMs
to avoid them also initializing since TOMOYO does not expect this
currently.
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes:
70b62c25665f636c ("LoadPin: Initialize as ordered LSM")
Co-developed-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
Martin Blumenstingl [Thu, 28 Mar 2019 20:47:21 +0000 (21:47 +0100)]
ARM: dts: meson8b: odroidc1: add the GPIO line names
This adds the GPIO line names from the schematics to get them displayed
in the debugfs output of each GPIO controller.
The schematics from Odroid-C1+ PCB revision 0.4
20150615 are used as
referenced.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Neil Armstrong [Mon, 25 Mar 2019 10:14:49 +0000 (11:14 +0100)]
arm64: dts: meson-g12a-x96-max: Enable BT Module
Enable the Bluetooth Module on the X96 Max Set-Top-Box.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Guillaume La Roque [Mon, 25 Mar 2019 10:14:48 +0000 (11:14 +0100)]
arm64: dts: meson-g12a-x96-max: add regulators
Add system regulators for the X96 Max Set-Top-Box.
Still missing
* VDD_EE (0.8V - PWM controlled)
* VDD_CPU (PWM controlled)
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
projects / platform / kernel / linux-starfive.git / log