drm/i915: Subsume intel_ctx_submit_request in to drm_i915_gem_request

Move all remaining elements that were unique to execlists queue items
in to the associated request.

Issue: VIZ-4274

v2: Rebase. Fixed issue of overzealous freeing of request.
v3: Removed re-addition of cleanup work queue (found by Daniel Vetter)
v4: Rebase.
v5: Actual removal of intel_ctx_submit_request. Update both tail and postfix
pointer in __i915_add_request (found by Thomas Daniel)
v6: Removed unrelated changes

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
[danvet: Reformat comment with strange linebreaks.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Remove FIXME_lrc_ctx backpointer

The first pass implementation of execlists required a backpointer to the context to be held
in the intel_ringbuffer. However the context pointer is available higher in the call stack.
Remove the backpointer from the ring buffer structure and instead pass it down through the
call stack.

v2: Integrate this changeset with the removal of duplicate request/execlist queue item members.
v3: Rebase
v4: Rebase. Remove passing of context when the request is passed.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Removed duplicate members from submit_request

Where there were duplicate variables for the tail, context and ring (engine)
in the gem request and the execlist queue item, use the one from the request
and remove the duplicate from the execlist queue item.

Issue: VIZ-4274

v1: Rebase
v2: Fixed build issues. Keep separate postfix & tail pointers as these are
used in different ways. Reinserted missing full tail pointer update.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: execlist request keeps ptr/ref to gem_request

Add a reference and pointer from the execlist queue item to the associated
gem request. For execlist requests that don't have a request, create one
as a placeholder.

Issue: VIZ-4274
v1: Rebase after upstream of "Replace seqno values with request structures" patchset.

Signed-off-by: Nick Hoath <nicholas.hoath@intel.com>
Reviewed-by: Thomas Daniel <thomas.daniel@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Keep drm_crtc->state in sync with intel_crtc->config

So that atomic operations will reference the right crtc state.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Improve how the memory for crtc state is allocated

The previous patch changed the config field in intel_crtc to a pointer,
but to keep the mechanical changes (done with spatch) separate from the
new code, the pointer was made to point to a new _config field with type
struct intel_crtc_state added to that struct. This patch improves that
code by getting rid of that field, allocating a state struct in
intel_crtc_init() a keeping it properly updated when a mode set
happens.

v2: Manual changes split from previous patch. (Matt)
    Don't leak the current state when the crtc is destroyed (Matt)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
[danvet: Squash in fixup from Matt Roper for driver unload.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Make intel_crtc->config a pointer

To match the semantics of drm_crtc->state, which this will eventually
become. The allocation of the memory for config will be fixed in a
followup patch. By adding the extra _config field to intel_crtc it was
possible to generate this entire patch with the cocci script below.

@@ @@
struct intel_crtc {
...
-struct intel_crtc_state config;
+struct intel_crtc_state _config;
+struct intel_crtc_state *config;
...
}
@@ struct intel_crtc *crtc; @@
-memset(&crtc->config, 0, sizeof(crtc->config));
+memset(crtc->config, 0, sizeof(*crtc->config));
@@ @@
__intel_set_mode(...) {
<...
-to_intel_crtc(crtc)->config = *pipe_config;
+(*(to_intel_crtc(crtc)->config)) = *pipe_config;
...>
}
@@ @@
intel_crtc_init(...) {
...
WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
+intel_crtc->config = &intel_crtc->_config;
return;
...
}
@@ struct intel_crtc *crtc; @@
-&crtc->config
+crtc->config
@@ struct intel_crtc *crtc; identifier member; @@
-crtc->config.member
+crtc->config->member
@@ expression E; @@
-&(to_intel_crtc(E)->config)
+to_intel_crtc(E)->config
@@ expression E; identifier member; @@
-to_intel_crtc(E)->config.member
+to_intel_crtc(E)->config->member

v2: Clarify manual changes by splitting them into another patch. (Matt)
    Improve cocci script to generate even more of the changes. (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Use local pipe_config varariable when available

In functions that define a local pipe_config variable to point to
crtc->config, replace remaining references to crtc->config with
the local variable. This makes the code more consistent and easier
to change in an automated manner.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Pass new_config down do crtc_compute_clock

This reduces the number of direct users of crtc->new_config, opening up
the possibilty of removing it altogether.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Embedded struct drm_crtc_state in intel_crtc_state

And get rid of the duplicate mode structures. This patch was generated
with the following semantic patch:

@@ @@
struct intel_crtc_state {
+struct drm_crtc_state base;
+
...
-struct drm_display_mode requested_mode;
-struct drm_display_mode adjusted_mode;
...
}
@@ struct intel_crtc_state *state; @@
-state->adjusted_mode
+state->base.adjusted_mode
@@ struct intel_crtc_state *state; @@
-state->requested_mode
+state->base.mode
@@ struct intel_crtc_state state; @@
-state.adjusted_mode
+state.base.adjusted_mode
@@ struct intel_crtc_state state; @@
-state.requested_mode
+state.base.mode
@@ struct drm_crtc *crtc; @@
-to_intel_crtc(crtc)->config.adjusted_mode
+to_intel_crtc(crtc)->config.base.adjusted_mode
@@ identifier member; expression E; @@
-PIPE_CONF_CHECK_FLAGS(adjusted_mode.member, E);
+PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.member, E);
@@ identifier member; @@
-PIPE_CONF_CHECK_I(adjusted_mode.member);
+PIPE_CONF_CHECK_I(base.adjusted_mode.member);
@@ identifier member; @@
-PIPE_CONF_CHECK_CLOCK_FUZZY(adjusted_mode.member);
+PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.member);

v2: Completely generate the patch with cocci. (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Rename struct intel_crtc_config to intel_crtc_state

The objective is to make this structure usable with the atomic helpers,
so let's start with the rename. Patch generated with coccinelle:

@@ @@
-struct intel_crtc_config {
+struct intel_crtc_state {
...
}
@@ @@
-struct intel_crtc_config
+struct intel_crtc_state

v2: Completely generate the patch with cocci. (Ander)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Modifying structures related to DRRS

Earlier, DRRS structures were specific to eDP (used only in intel_dp).
Since DRRS can be extended to other internal display types
(if the panel supports multiple RR), modifying structures
to be part of drm_i915_private and have a provision to add display related
structs like intel_dp.
Also, aligning with frontbuffer tracking mechanism, the new structure
contains data for busy frontbuffer bits.

Signed-off-by: Vandana Kannan <vandana.kannan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Rename 'reg' to 'clk_reg' to unconfuse it from the other 'reg'

On VLV/CHV the rc6 residency calculations read a second register to
determine the actual units used for the residency value. The variable
name 'reg' where that register value is stored shadows the function
argument 'reg'. That can easily leave the reader utterly confused, so
rename the internal variable to 'clk_reg'.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
[danvet: Spellfix in commit message.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Drop VLV checks from rc6p and rc6pp sysfs files

We don't register the rc6p and rc6pp sysfs files on VLV, so there's no
point in having any VLV checks in them. Drop the checks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Revert "Revert "drm/i915/chv: Use timeout mode for RC6 on chv""

The performance regression from the CHV RC6 EI->TO change is now fixed
so re-enable TO mode for better RC6 resicency.

This reverts commit e85a5c7989c5be8fe30acc35eba9fb54b3450f36.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Configure GEN6_RP_DOWN_TIMEOUT on CHV

CherryViewA0_iGfx_BIOS_DRIVER_PUNIT_spec_y14w28d5 tells us not to enable
the RP down timeout interrupt, and says that the timeout value is hence
not used. We do enable that interrupt currently though, so leaving the
timeout as 0 results in very poor performance as the GPU frequency keeps
dropping constantly. So just program the register with the recommended
value.

Leaving the interrupt enabled doesn't seem to do any harm so far. So
I've decided to leave it on for now, just to avoid making CHV a
special case.

This fixes the performance regression from:
 commit 5a0afd4b78ec23f27f5d486ac3d102c2e8d66bd7
 Author: Deepak S <deepak.s@linux.intel.com>
 Date:   Sat Dec 13 11:43:27 2014 +0530

    drm/i915/chv: Use timeout mode for RC6 on chv

Cc: Deepak S <deepak.s@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Change VLV GEN6_RP_DOWN_TIMEOUT value to decimal

We use decimal for all the other RP magic values, so change
GEN6_RP_DOWN_TIMEOUT to decimal as well. Also change the order
of the register writes to match the BIOS spec for easier verification.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Disable RC6 before configuring in on VLV/CHV

Follow the sequence in the BIOS spec and clear the RC_CONTROL register
before changing any of the other RC6/RP registers.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Deepak S<deepak.s@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: New offset for reading frequencies on CHV.

Use new Sideband offset to read max/min/gaur freq based on the SKU it
is running on. Based on the Number of EU, we read different bits to
identify the max frequencies at which system can run.

v2: reuse mask definitions & INTEL_INFO() to get device info (Ville)

v3: add break in switch conditions (Ville)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala at linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Increase the range of sideband address.

Looks like latest BSW/CHV production system has sideband address > 128.
Use u32 data types to cover new offset/address range :)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915/chv: Populate total EU count on Cherryview

Starting with Cherryview, devices may have a varying number of EU for
a given ID due to creative fusing. Punit support different frequency for
different fuse data. We use this patch to help get total eu enabled and
read the right offset to get RP0

Based upon a patch from Jeff, but reworked to only store eu_total and
avoid sending info to userspace

v2: Format register definitions (Jani)

Signed-off-by: Deepak S <deepak.s@linux.intel.com>
Acked-by: Jeff McGee <jeff.mcgee@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/i915: Don't cleanup plane state in intel_plane_destroy()

When we transitioned to the atomic plane helpers in commit:

        commit ea2c67bb4affa84080c616920f3899f123786e56
        Author: Matt Roper <matthew.d.roper@intel.com>
        Date:   Tue Dec 23 10:41:52 2014 -0800

            drm/i915: Move to atomic plane helpers (v9)

one of the changes was to call intel_plane_destroy_state() while tearing
down a plane to prevent leaks when unloading the driver.  That made
sense when the patches were first written, but before they were merged,

        commit 3009c0377f25c29852b218a6933a969d02cbdc5d
        Author:     Thierry Reding <treding@nvidia.com>
        Date:       Tue Nov 25 12:09:49 2014 +0100

            drm: Free atomic state during cleanup

had already landed, which made this the responsibility of the DRM core.
The result was that we were kfree()'ing the state twice, and also
possibly double-unref'ing a framebuffer, leading to memory corruption
when the driver was unloaded.

The fix is to simply not try to cleanup the state in the i915 teardown
code now that the core handles this for us.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88433
Testcase: igt/drv_module_reload
Root-cause-analysis-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm: Add rotation value to plane state

The rotation property is shared by multiple drivers, so it makes sense
to store the rotation value (for atomic-converted drivers) in the common
plane state so that core code can eventually access it as well.

Cc: dri-devel@lists.freedesktop.org
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'drm-next' of https://github.com/markyzq/kernel-drm-rockchip into drm-next

single rockchip fix.

* 'drm-next' of https://github.com/markyzq/kernel-drm-rockchip:
  drm/rockchip: fix dma_alloc_attrs() error check

Merge branch 'drm-next-3.20' of git://people.freedesktop.org/~agd5f/linux into drm-next

Radeon drm-next changes for 3.20.  Highlights:
- Indirect draw support for evergreen/NI hw
- SMC fan control support for SI/CI
- Manual fan control for SI/CI
- DP audio support
- Lots of code cleanup

* 'drm-next-3.20' of git://people.freedesktop.org/~agd5f/linux: (45 commits)
  drm/radeon: make MMU_NOTIFIER optional
  drm/radeon: use NULL rather then 0 in audio detect
  drm/radeon: whitespace clean up in radeon_audio.c
  radeon/audio: enable DP audio
  radeon/audio: moved audio caps programming to audio_hotplug() function
  radeon/audio: applied audio_dpms() and audio_mode_set() calls
  radeon/audio: consolidate audio_mode_set() functions
  radeon/audio: removed unnecessary debug settings
  radeon/audio: moved mute programming to a separate function
  radeon/audio: moved audio packet programming to a separate function
  radeon/audio: set_avi_packet() function cleanup
  radeon/audio: removed unnecessary CRC control programing
  radeon: moved HDMI color depth programming to a separate function
  radeon/audio: moved VBI packet programming to separate functions
  radeon/audio: consolidate update_acr() functions (v2)
  radeon/audio: consolidate update_avi_infoframe() functions
  radeon/audio: consolidate audio_set_dto() functions
  radeon/audio: consolidate audio_fini() functions
  radeon/audio: consolidate audio_enable() functions
  radeon/audio: consolidate select_pin() functions
  ...

Merge branch 'exynos-drm-next' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next

  This pull request includes some code refactoring which removes
   Exynos specific structure names and uses generic structure
   names instead, and makes all plane updating to be done
   by only exynos_update_plane function. And also it includes
   some cleanup and fixup patches.

* 'exynos-drm-next' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (22 commits)
  drm/exynos: fimd: check error status for drm_iommu_attach_device
  drm/exynos: create exynos_check_plane()
  drm/exynos: remove mode_set() ops from exynos_crtc
  drm/exynos: don't duplicate drm_display_mode in fimd context
  drm/exynos: remove struct exynos_drm_manager
  drm/exynos: remove drm_dev from struct exynos_drm_manager
  drm/exynos: move 'type' from manager to crtc struct
  drm/exynos: remove pipe member of struct exynos_drm_manager
  drm/exynos: add pipe param to exynos_drm_crtc_create()
  drm/exynos: rename base object of struct exynos_drm_crtc to 'base'
  drm/exynos: remove exynos_drm_crtc_mode_set_commit()
  drm/exynos: call exynos_update_plane() directly on page flips
  drm/exynos: unify plane update on exynos_update_plane()
  drm/exynos: remove exynos_plane_commit() wrapper
  drm/exynos: don't do any DPMS operation while updating planes
  drm/exynos: Don't touch DPMS when updating overlay planes
  drm/exynos/vidi: remove useless ops->commit()
  drm/exynos/fimd: don't initialize 'ret' variable in fimd_probe()
  drm/exynos: remove struct exynos_drm_overlay
  drm/exynos: remove exynos_drm_crtc_plane_* wrappers
  ...

Merge tag 'drm-amdkfd-next-fixes-2015-01-25' of git://people.freedesktop.org/~gabbayo/linux into drm-next

Here is a pull request of fixes for 3.20 patches, including the fix you asked
me when you merged the previous pull request.

* tag 'drm-amdkfd-next-fixes-2015-01-25' of git://people.freedesktop.org/~gabbayo/linux:
  drm/amdkfd: change amdkfd version to 0.7.1
  drm/radeon: cik_sdma_ctx_switch_enable() can be static
  drm/amdkfd: Fix sparse errors
  drm/amdkfd: Handle case of invalid queue type
  drm/amdkfd: Add break at the end of case
  drm/amdkfd: Remove negative check of uint variable

drm: fix drm_display_info_set_bus_formats kernel doc header

formats and num_formats arguments were previously called fmts and nfmts.
Fix the kernel doc comment so that it matches the new argument names.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel into drm-next

- refactor i915/snd-hda interaction to use the component framework (Imre)
- psr cleanups and small fixes (Rodrigo)
- a few perf w/a from Ken Graunke
- switch to atomic plane helpers (Matt Roper)
- wc mmap support (Chris Wilson & Akash Goel)
- smaller things all over

* tag 'drm-intel-next-2015-01-17' of git://anongit.freedesktop.org/drm-intel: (40 commits)
  drm/i915: Update DRIVER_DATE to 20150117
  i915: reuse %ph to dump small buffers
  drm/i915: Ensure the HiZ RAW Stall Optimization is on for Cherryview.
  drm/i915: Enable the HiZ RAW Stall Optimization on Broadwell.
  drm/i915: PSR link standby at debugfs
  drm/i915: group link_standby setup and let this info visible everywhere.
  drm/i915: Add missing vbt check.
  drm/i915: PSR HSW/BDW: Fix inverted logic at sink main_link_active bit.
  drm/i915: PSR VLV/CHV: Remove condition checks that only applies to Haswell.
  drm/i915: VLV/CHV PSR needs to exit PSR on every flush.
  drm/i915: Fix kerneldoc for i915 atomic plane code
  drm/i915: Don't pretend SDVO hotplug works on 915
  drm/i915: Don't register HDMI connectors for eDP ports on VLV/CHV
  drm/i915: Remove I915_HAS_HOTPLUG() check from i915_hpd_irq_setup()
  drm/i915: Make hpd arrays big enough to avoid out of bounds access
  Revert "drm/i915/chv: Use timeout mode for RC6 on chv"
  drm/i915: Improve HiZ throughput on Cherryview.
  drm/i915: Reset CSB read pointer in ring init
  drm/i915: Drop unused position fields (v2)
  drm/i915: Move to atomic plane helpers (v9)
  ...

Merge tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel into drm-next

Just flushing out my drm-misc branch, nothing major. Well too old patches
I've dug out from years since a patch from Rob look eerily familiar ;-)

* tag 'topic/core-stuff-2015-01-23' of git://anongit.freedesktop.org/drm-intel:
  drm/probe-helper: clamp unknown connector status in the poll work
  drm/probe-helper: don't lose hotplug event
  next: drm/atomic: Use copy_from_user to copy 64 bit data from user space
  drm: Make drm_read() more robust against multithreaded races
  drm/fb-helper: Propagate errors from initial config failure
  drm: Drop superfluous "select VT_HW_CONSOLE_BINDING"

drm/exynos: fimd: check error status for drm_iommu_attach_device

check error status for drm_iommu_attach_device() and make sure
it propagates till the caller.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
Signed-off-by: Inki Dae <daeinki@gmail.com>

drm/exynos: create exynos_check_plane()

Split update plane in two parts, an initial check part that can fail
and the update part that can't fail.

This is a important step for the upcoming atomic modesetting support.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove mode_set() ops from exynos_crtc

It is no longer used anywhere.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: don't duplicate drm_display_mode in fimd context

We can safely use the mode stored in the crtc.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove struct exynos_drm_manager

exynos_drm_manager was just a redundant struct to represent the crtc as
well. In this commit we merge exynos_drm_manager into exynos_drm_crtc to
remove an unnecessary level of indirection easing the understand of the
flow on exynos.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove drm_dev from struct exynos_drm_manager

manager-drm_dev is only accessed by exynos_drm_crtc_create() so this patch
pass drm_dev as argument on exynos_drm_crtc_create() and remove it from
struct exynos_drm_manager.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: move 'type' from manager to crtc struct

'type' is now part of the struct exynos_drm_crtc. This is just another
step in the struct exynos_drm_manager removal.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove pipe member of struct exynos_drm_manager

It is not longer used. This is part of the process of removing
struct exynos_drm_manager entirely.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: add pipe param to exynos_drm_crtc_create()

Get the pipe value from a parameter instead of getting it from
manager->pipe. We are removing manager->pipe.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: rename base object of struct exynos_drm_crtc to 'base'

'base' is more widely used name in the drm subsystem for the base object.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove exynos_drm_crtc_mode_set_commit()

This was just as extra chain in the call stack. We just rename it to
_set_base() and let it do everything alone.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: call exynos_update_plane() directly on page flips

Avoid an extra call to exynos_drm_crtc_mode_set_commit() that only calls
exynos_update_plane().

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: unify plane update on exynos_update_plane()

We can safely use the exynos_update_plane() to update the plane
framebuffer for both the overlay and primary planes.

Note that this patch removes a call to manager->ops->commit() in
exynos_drm_crtc_mode_set_commit(). The commit() call is used only by the
fimd driver to set underlying timings and need only in full modeset
operations. For plane update only win_commit is needed.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove exynos_plane_commit() wrapper

It's doing nothing but calling exynos_crtc->ops->win_commit(), so let's
call this directly to avoid extra layers of abstraction.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: don't do any DPMS operation while updating planes

DPMS only makes sense when the mode changes, for plane update changes do
not perform any dpms operation.

This move places the win_commit() and commit() calls directly in the code
instead of calling exynos_drm_crtc_commit() thus avoiding DPMS operations.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: Don't touch DPMS when updating overlay planes

DPMS settings should only be changed by a full modeset.
exynos_plane_update() should only care about updating the planes itself
and nothing else.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/vidi: remove useless ops->commit()

vidi_commit does nothing, remove it and its callers.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos/fimd: don't initialize 'ret' variable in fimd_probe()

We  set it in the beginning of the function, thus no need to set it at
initialization.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove struct exynos_drm_overlay

struct exynos_drm_overlay has no practical advantage nor serves as
important piece of the exynos API design. The only place it was used
was inside the struct exynos_plane which was just causing a extra
access overhead. Users had to access the overlay first and just then
get the plane information it contains.

This patch merges struct exynos_drm_overlay into struct exynos_plane.
It also renames struct exynos_plane to struct exynos_drm_plane.

The rational is to cut one step to access plane information.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: remove exynos_drm_crtc_plane_* wrappers

This functions were doing nothing but calling a manager op function,
so remove them and call the manager directly.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: expose struct exynos_drm_crtc

Let other pieces of the driver access struct exynos_drm_crtc as well.

struct exynos_drm_manager will be merged into struct exynos_drm_crtc, in
the sense we will move all its members to exynos_drm_crtc, so to start
this conversion exynos_drm_crtc need to be exposed as well.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/exynos: move to_exynos_crtc() macro to main header

With this change we allow other pieces of the code to use this macro.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>

drm/amdkfd: change amdkfd version to 0.7.1

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

drm/radeon: cik_sdma_ctx_switch_enable() can be static

drivers/gpu/drm/radeon/cik_sdma.c:293:6: sparse: symbol 'cik_sdma_ctx_switch_enable' was not declared. Should it be static?

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>

drm/amdkfd: Fix sparse errors

Signed-off-by: Oded Gabbay <oded.gabbay@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: make MMU_NOTIFIER optional

In cases where MMU_NOTIFIER is not available, userptr will not be
available.  Similar to i915, although not making an exception for
CAP_SYS_ADMIN.

The proposed userspace patches for userptr seem to handle the fall-
back properly, so a userptr-less kernel should not be a problem.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: use NULL rather then 0 in audio detect

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: whitespace clean up in radeon_audio.c

Clean up some formatting in radeon_audio.c to be
more consistent with the rest of the driver.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: enable DP audio

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: moved audio caps programming to audio_hotplug() function

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: applied audio_dpms() and audio_mode_set() calls

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_mode_set() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: removed unnecessary debug settings

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: moved mute programming to a separate function

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: moved audio packet programming to a separate function

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: set_avi_packet() function cleanup

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: removed unnecessary CRC control programing

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon: moved HDMI color depth programming to a separate function

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: moved VBI packet programming to separate functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate update_acr() functions (v2)

V2: fix missing dce6 callback

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate update_avi_infoframe() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_set_dto() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_fini() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_enable() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate select_pin() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_get_pin() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate write_latency_fields() functions

Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate write_speaker_allocation() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate write_sad_regs() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: defined initial audio interface that gets initialized via detect() call

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

radeon/audio: consolidate audio_init() functions

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Slava Grigorev <slava.grigorev@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused 7xx dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused eg dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused sumo dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused tn dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused btc dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused ni dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused kv dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused si dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: comment out some currently unused ci dpm code

Keep it around for reference.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: radeon: radeon_object: Remove unused function

Remove the function radeon_bo_fbdev_mmap() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/radeon_fb: Remove unused function

Remove the function radeon_fbdev_total_size() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon/radeon_i2c: Remove unused function

Remove the function radeon_best_encoder() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.

Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: enable smc fan control on SI

Working now with Oleg's last round of fixes.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

fixes for SI fan handling

Added temperature values to SMC payload.
Fan mode check moved check to proper place.

Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: bind fan control on SI cards to hwmon interface

This adds a possibility to control fan on SI parts
via exported hwmon variables. Note that automatic
ucode fan management pauses if you choose to enable
manual fan control.  Use with caution!

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: bind fan control on CI cards to hwmon interface (v2)

This adds a possibility to control fan on CI parts
via exported hwmon variables. Note that automatic
ucode fan management pauses if you choose to enable
manual fan control.  Use with caution!

v2: agd5f: fix formatting, squash in:

    minor fix for pwm1_enable exposed value

    Track smc control in addition to fan mode
    This fixes pwm1_enable being constantly set
    to 1 because of enabled smc control

also handle the case where smc fan control is disabled.

Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: add hwmon interface for managing fan pwm (v2)

This adds percent-based fan control. Attributes (I hope) follow the
sysfs-interface specification:
* pwm1 - fan speed query/manage
* pwm1_max, pwm1_min - min/max values for fan pwm (constant)
* pwm1_enable - fan control query/manage (enable/disable)

(There is no rpm-based control for now)

v2: agd5f: fix formatting

Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

add common fan control asic callbacks

Adds 4 callbacks for managing fan state/speed
* fan_ctrl_set_mode - manages fan control mode (nonzero == manual)
* fan_ctrl_get_mode - queries fan control mode
* set_fan_speed_percent - manages fan speed as percentage value
* get_fan_speed_percent - queries fan speed as percentage value

Signed-off-by: Oleg Chernovskiy <algonkvel@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: evergreen/cayman indirect draw support (v2)

Add the necessary set of commands to support OpenGL
indirect draw calls on evergreen/cayman devices that
do not have VM.

v2: agd5f: fix warning on 32-bit

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Glenn Kennard <glenn.kennard@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>