Alexey Dobriyan [Fri, 6 Jan 2023 19:30:14 +0000 (22:30 +0300)]
proc: fix PIE proc-empty-vm, proc-pid-vm tests
commit
5316a017d093f644675a56523bcf5787ba8f4fef upstream.
vsyscall detection code uses direct call to the beginning of
the vsyscall page:
asm ("call %P0" :: "i" (0xffffffffff600000))
It generates "call rel32" instruction but it is not relocated if binary
is PIE, so binary segfaults into random userspace address and vsyscall
page status is detected incorrectly.
Do more direct:
asm ("call *%rax")
which doesn't do need any relocaltions.
Mark g_vsyscall as volatile for a good measure, I didn't find instruction
setting it to 0. Now the code is obviously correct:
xor eax, eax
mov rdi, rbp
mov rsi, rbp
mov DWORD PTR [rip+0x2d15], eax # g_vsyscall = 0
mov rax, 0xffffffffff600000
call rax
mov DWORD PTR [rip+0x2d02], 1 # g_vsyscall = 1
mov eax, DWORD PTR ds:0xffffffffff600000
mov DWORD PTR [rip+0x2cf1], 2 # g_vsyscall = 2
mov edi, [rip+0x2ceb] # exit(g_vsyscall)
call exit
Note: fixed proc-empty-vm test oopses 5.19.0-28-generic kernel
but this is separate story.
Link: https://lkml.kernel.org/r/Y7h2xvzKLg36DSq8@p183
Fixes:
5bc73bb3451b9 ("proc: test how it holds up with mapping'less process")
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Howlett [Mon, 9 Jan 2023 20:58:20 +0000 (20:58 +0000)]
nommu: fix split_vma() map_count error
commit
fd9edbdbdcde6b489ce59f326755ef16a2ffadd7 upstream.
During the maple tree conversion of nommu, an error in counting the VMAs
was introduced by counting the existing VMA again. The counting used to
be decremented by one and incremented by two, but now it only increments
by two. Fix the counting error by moving the increment outside the
setup_vma_to_mm() function to the callers.
Link: https://lkml.kernel.org/r/20230109205809.956325-1-Liam.Howlett@oracle.com
Fixes:
8220543df148 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Howlett [Mon, 9 Jan 2023 20:57:21 +0000 (20:57 +0000)]
nommu: fix do_munmap() error path
commit
80be727ec87225797771a39f3e6801baf291faaf upstream.
When removing a VMA from the tree fails due to no memory, do not free the
VMA since a reference still exists.
Link: https://lkml.kernel.org/r/20230109205708.956103-1-Liam.Howlett@oracle.com
Fixes:
8220543df148 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liam Howlett [Mon, 9 Jan 2023 20:55:21 +0000 (20:55 +0000)]
nommu: fix memory leak in do_mmap() error path
commit
7f31cced5724e6d414fe750aa1cd7e7b578ec22f upstream.
The preallocation of the maple tree nodes may leak if the error path to
"error_just_free" is taken. Fix this by moving the freeing of the maple
tree nodes to a shared location for all error paths.
Link: https://lkml.kernel.org/r/20230109205507.955577-1-Liam.Howlett@oracle.com
Fixes:
8220543df148 ("nommu: remove uses of VMA linked list")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Fri, 30 Dec 2022 20:07:47 +0000 (21:07 +0100)]
wifi: mac80211: fix initialization of rx->link and rx->link_sta
commit
e66b7920aa5ac5b1a1997a454004ba9246a3c005 upstream.
There are some codepaths that do not initialize rx->link_sta properly. This
causes a crash in places which assume that rx->link_sta is valid if rx->sta
is valid.
One known instance is triggered by __ieee80211_rx_h_amsdu being called from
fast-rx. It results in a crash like this one:
BUG: kernel NULL pointer dereference, address:
00000000000000a8
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 1 PID: 506 Comm: mt76-usb-rx phy Tainted: G E 6.1.0-debian64x+1.7 #3
Hardware name: ZOTAC ZBOX-ID92/ZBOX-IQ01/ZBOX-ID92/ZBOX-IQ01, BIOS B220P007 05/21/2014
RIP: 0010:ieee80211_deliver_skb+0x62/0x1f0 [mac80211]
Code: 00 48 89 04 24 e8 9e a7 c3 df 89 c0 48 03 1c c5 a0 ea 39 a1 4c 01 6b 08 48 ff 03 48
83 7d 28 00 74 11 48 8b 45 30 48 63 55 44 <48> 83 84 d0 a8 00 00 00 01 41 8b 86 c0
11 00 00 8d 50 fd 83 fa 01
RSP: 0018:
ffff999040803b10 EFLAGS:
00010286
RAX:
0000000000000000 RBX:
ffffb9903f496480 RCX:
0000000000000000
RDX:
0000000000000000 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffff999040803ce0 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
ffff8d21828ac900
R13:
000000000000004a R14:
ffff8d2198ed89c0 R15:
ffff8d2198ed8000
FS:
0000000000000000(0000) GS:
ffff8d24afe80000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00000000000000a8 CR3:
0000000429810002 CR4:
00000000001706e0
Call Trace:
<TASK>
__ieee80211_rx_h_amsdu+0x1b5/0x240 [mac80211]
? ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? __local_bh_enable_ip+0x3b/0xa0
ieee80211_prepare_and_rx_handle+0xcdd/0x1320 [mac80211]
? prepare_transfer+0x109/0x1a0 [xhci_hcd]
ieee80211_rx_list+0xa80/0xda0 [mac80211]
mt76_rx_complete+0x207/0x2e0 [mt76]
mt76_rx_poll_complete+0x357/0x5a0 [mt76]
mt76u_rx_worker+0x4f5/0x600 [mt76_usb]
? mt76_get_min_avg_rssi+0x140/0x140 [mt76]
__mt76_worker_fn+0x50/0x80 [mt76]
kthread+0xed/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
Since the initialization of rx->link and rx->link_sta is rather convoluted
and duplicated in many places, clean it up by using a helper function to
set it.
Fixes:
ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling")
Fixes:
b320d6c456ff ("wifi: mac80211: use correct rx link_sta instead of default")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221230200747.19040-1-nbd@nbd.name
[remove unnecessary rx->sta->sta.mlo check]
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Wetzel [Fri, 30 Dec 2022 12:18:50 +0000 (13:18 +0100)]
wifi: mac80211: sdata can be NULL during AMPDU start
commit
69403bad97aa0162e3d7911b27e25abe774093df upstream.
ieee80211_tx_ba_session_handle_start() may get NULL for sdata when a
deauthentication is ongoing.
Here a trace triggering the race with the hostapd test
multi_ap_fronthaul_on_ap:
(gdb) list *drv_ampdu_action+0x46
0x8b16 is in drv_ampdu_action (net/mac80211/driver-ops.c:396).
391 int ret = -EOPNOTSUPP;
392
393 might_sleep();
394
395 sdata = get_bss_sdata(sdata);
396 if (!check_sdata_in_driver(sdata))
397 return -EIO;
398
399 trace_drv_ampdu_action(local, sdata, params);
400
wlan0: moving STA 02:00:00:00:03:00 to state 3
wlan0: associated
wlan0: deauthenticating from 02:00:00:00:03:00 by local choice (Reason: 3=DEAUTH_LEAVING)
wlan3.sta1: Open BA session requested for 02:00:00:00:00:00 tid 0
wlan3.sta1: dropped frame to 02:00:00:00:00:00 (unauthorized port)
wlan0: moving STA 02:00:00:00:03:00 to state 2
wlan0: moving STA 02:00:00:00:03:00 to state 1
wlan0: Removed STA 02:00:00:00:03:00
wlan0: Destroyed STA 02:00:00:00:03:00
BUG: unable to handle page fault for address:
fffffffffffffb48
PGD
11814067 P4D
11814067 PUD
11816067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 2 PID: 133397 Comm: kworker/u16:1 Tainted: G W 6.1.0-rc8-wt+ #59
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
Workqueue: phy3 ieee80211_ba_session_work [mac80211]
RIP: 0010:drv_ampdu_action+0x46/0x280 [mac80211]
Code: 53 48 89 f3 be 89 01 00 00 e8 d6 43 bf ef e8 21 46 81 f0 83 bb a0 1b 00 00 04 75 0e 48 8b 9b 28 0d 00 00 48 81 eb 10 0e 00 00 <8b> 93 58 09 00 00 f6 c2 20 0f 84 3b 01 00 00 8b 05 dd 1c 0f 00 85
RSP: 0018:
ffffc900025ebd20 EFLAGS:
00010287
RAX:
0000000000000000 RBX:
fffffffffffff1f0 RCX:
ffff888102228240
RDX:
0000000080000000 RSI:
ffffffff918c5de0 RDI:
ffff888102228b40
RBP:
ffffc900025ebd40 R08:
0000000000000001 R09:
0000000000000001
R10:
0000000000000001 R11:
0000000000000000 R12:
ffff888118c18ec0
R13:
0000000000000000 R14:
ffffc900025ebd60 R15:
ffff888018b7efb8
FS:
0000000000000000(0000) GS:
ffff88817a600000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
fffffffffffffb48 CR3:
0000000105228006 CR4:
0000000000170ee0
Call Trace:
<TASK>
ieee80211_tx_ba_session_handle_start+0xd0/0x190 [mac80211]
ieee80211_ba_session_work+0xff/0x2e0 [mac80211]
process_one_work+0x29f/0x620
worker_thread+0x4d/0x3d0
? process_one_work+0x620/0x620
kthread+0xfb/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-2-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aloka Dixit [Wed, 21 Dec 2022 18:56:16 +0000 (10:56 -0800)]
wifi: mac80211: reset multiple BSSID options in stop_ap()
commit
0eb38842ada035d71bb06fb9116f26f24ee0f998 upstream.
Reset multiple BSSID options when all AP related configurations are
reset in ieee80211_stop_ap().
Stale values result in HWSIM test failures (e.g. p2p_group_cli_invalid),
if run after 'he_ap_ema'.
Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Link: https://lore.kernel.org/r/20221221185616.11514-1-quic_alokad@quicinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Felix Fietkau [Wed, 14 Dec 2022 13:03:26 +0000 (14:03 +0100)]
wifi: mac80211: fix MLO + AP_VLAN check
commit
f216033d770f7ca0eda491fe01a9f02e7af59576 upstream.
Instead of preventing adding AP_VLAN to MLO enabled APs, this check was
preventing adding more than one 4-addr AP_VLAN regardless of the MLO status.
Fix this by adding missing extra checks.
Fixes:
ae960ee90bb1 ("wifi: mac80211: prevent VLANs on MLDs")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20221214130326.37756-1-nbd@nbd.name
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arend van Spriel [Wed, 11 Jan 2023 11:24:19 +0000 (12:24 +0100)]
wifi: brcmfmac: fix regression for Broadcom PCIe wifi devices
commit
ed05cb177ae5cd7f02f1d6e7706ba627d30f1696 upstream.
A sanity check was introduced considering maximum flowrings above
256 as insane and effectively aborting the device probe. This
resulted in regression for number of users as the value turns out
to be sane after all.
Fixes:
2aca4f3734bd ("brcmfmac: return error when getting invalid max_flowrings from dongle")
Reported-by: chainofflowers <chainofflowers@posteo.net>
Link: https://lore.kernel.org/all/4781984.GXAFRqVoOG@luna/
Reported-by: Christian Marillat <marillat@debian.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216894
Cc: stable@vger.kernel.org
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230111112419.24185-1-arend.vanspriel@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Thu, 29 Dec 2022 10:28:29 +0000 (11:28 +0100)]
Bluetooth: hci_qca: Fix driver shutdown on closed serdev
commit
272970be3dabd24cbe50e393ffee8f04aec3b9a8 upstream.
The driver shutdown callback (which sends EDL_SOC_RESET to the device
over serdev) should not be invoked when HCI device is not open (e.g. if
hci_dev_open_sync() failed), because the serdev and its TTY are not open
either. Also skip this step if device is powered off
(qca_power_shutdown()).
The shutdown callback causes use-after-free during system reboot with
Qualcomm Atheros Bluetooth:
Unable to handle kernel paging request at virtual address
0072662f67726fd7
...
CPU: 6 PID: 1 Comm: systemd-shutdow Tainted: G W
6.1.0-rt5-00325-g8a5f56bcfcca #8
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
tty_driver_flush_buffer+0x4/0x30
serdev_device_write_flush+0x24/0x34
qca_serdev_shutdown+0x80/0x130 [hci_uart]
device_shutdown+0x15c/0x260
kernel_restart+0x48/0xac
KASAN report:
BUG: KASAN: use-after-free in tty_driver_flush_buffer+0x1c/0x50
Read of size 8 at addr
ffff16270c2e0018 by task systemd-shutdow/1
CPU: 7 PID: 1 Comm: systemd-shutdow Not tainted
6.1.0-next-
20221220-00014-gb85aaf97fb01-dirty #28
Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT)
Call trace:
dump_backtrace.part.0+0xdc/0xf0
show_stack+0x18/0x30
dump_stack_lvl+0x68/0x84
print_report+0x188/0x488
kasan_report+0xa4/0xf0
__asan_load8+0x80/0xac
tty_driver_flush_buffer+0x1c/0x50
ttyport_write_flush+0x34/0x44
serdev_device_write_flush+0x48/0x60
qca_serdev_shutdown+0x124/0x274
device_shutdown+0x1e8/0x350
kernel_restart+0x48/0xb0
__do_sys_reboot+0x244/0x2d0
__arm64_sys_reboot+0x54/0x70
invoke_syscall+0x60/0x190
el0_svc_common.constprop.0+0x7c/0x160
do_el0_svc+0x44/0xf0
el0_svc+0x2c/0x6c
el0t_64_sync_handler+0xbc/0x140
el0t_64_sync+0x190/0x194
Fixes:
7e7bbddd029b ("Bluetooth: hci_qca: Fix qca6390 enable failure after warm reboot")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luiz Augusto von Dentz [Mon, 19 Dec 2022 21:32:51 +0000 (13:32 -0800)]
Bluetooth: hci_sync: Fix use HCI_OP_LE_READ_BUFFER_SIZE_V2
commit
3a4d29b6d631bb00236a98887e1039bbfc1b6ab5 upstream.
Don't try to use HCI_OP_LE_READ_BUFFER_SIZE_V2 if controller don't
support ISO channels, but in order to check if ISO channels are
supported HCI_OP_LE_READ_LOCAL_FEATURES needs to be done earlier so the
features bits can be checked on hci_le_read_buffer_size_sync.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216817
Fixes:
c1631dbc00c1 ("Bluetooth: hci_sync: Fix hci_read_buffer_size_sync")
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 15 Dec 2022 17:02:28 +0000 (18:02 +0100)]
fbdev: omapfb: avoid stack overflow warning
[ Upstream commit
634cf6ead93988b0da9ac054521ab63a3ba189db ]
The dsi_irq_stats structure is a little too big to fit on the
stack of a 32-bit task, depending on the specific gcc options:
fbdev/omap2/omapfb/dss/dsi.c: In function 'dsi_dump_dsidev_irqs':
fbdev/omap2/omapfb/dss/dsi.c:1621:1: error: the frame size of 1064 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
Since this is only a debugfs file, performance is not critical,
so just dynamically allocate it, and print an error message
in there in place of a failure code when the allocation fails.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rob Herring [Tue, 3 Jan 2023 18:00:32 +0000 (12:00 -0600)]
of: fdt: Honor CONFIG_CMDLINE* even without /chosen node, take 2
[ Upstream commit
064e32dc5b03114d0767893fecdaf7b5dfd8c286 ]
I do not read a strict requirement on /chosen node in either ePAPR or in
Documentation/devicetree. Help text for CONFIG_CMDLINE and
CONFIG_CMDLINE_EXTEND doesn't make their behavior explicitly dependent on
the presence of /chosen or the presense of /chosen/bootargs.
However the early check for /chosen and bailing out in
early_init_dt_scan_chosen() skips CONFIG_CMDLINE handling which is not
really related to /chosen node or the particular method of passing cmdline
from bootloader.
This leads to counterintuitive combinations (assuming
CONFIG_CMDLINE_EXTEND=y):
a) bootargs="foo", CONFIG_CMDLINE="bar" => cmdline=="foo bar"
b) /chosen missing, CONFIG_CMDLINE="bar" => cmdline==""
c) bootargs="", CONFIG_CMDLINE="bar" => cmdline==" bar"
Rework early_init_dt_scan_chosen() so that the cmdline config options are
always handled.
[commit msg written by Alexander Sverdlin]
Cc: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Tested-by: Geoff Levand <geoff@infradead.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20230103-dt-cmdline-fix-v1-2-7038e88b18b6@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Rui [Wed, 4 Jan 2023 14:58:31 +0000 (22:58 +0800)]
perf/x86/rapl: Add support for Intel Emerald Rapids
[ Upstream commit
57512b57dcfaf63c52d8ad2fb35321328cde31b0 ]
Emerald Rapids RAPL support is the same as previous Sapphire Rapids.
Add Emerald Rapids model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230104145831.25498-2-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zhang Rui [Wed, 4 Jan 2023 14:58:30 +0000 (22:58 +0800)]
perf/x86/rapl: Add support for Intel Meteor Lake
[ Upstream commit
f52853a668bfeddd79f319d536a506f68cc2b478 ]
Meteor Lake RAPL support is the same as previous Sky Lake.
Add Meteor Lake model for RAPL.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230104145831.25498-1-rui.zhang@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aaron Thompson [Wed, 4 Jan 2023 10:07:37 +0000 (10:07 +0000)]
memblock tests: Fix compilation error.
[ Upstream commit
340726747336716350eb5a928b860a29db955f05 ]
Commit
cf4694be2b2cf ("tools: Add atomic_test_and_set_bit()") changed
tools/arch/x86/include/asm/atomic.h to include <asm/asm.h>, which causes
'make -C tools/testing/memblock' to fail with:
In file included from ../../include/asm/atomic.h:6,
from ../../include/linux/atomic.h:5,
from ./linux/mmzone.h:5,
from ../../include/linux/mm.h:5,
from ../../include/linux/pfn.h:5,
from ./linux/memory_hotplug.h:6,
from ./linux/init.h:7,
from ./linux/memblock.h:11,
from tests/common.h:8,
from tests/basic_api.h:5,
from main.c:2:
../../include/asm/../../arch/x86/include/asm/atomic.h:11:10: fatal error: asm/asm.h: No such file or directory
11 | #include <asm/asm.h>
| ^~~~~~~~~~~
Create a symlink to asm/asm.h in the same manner as the existing one to
asm/cmpxchg.h.
Signed-off-by: Aaron Thompson <dev@aaront.org>
Link: https://lore.kernel.org/r/010101857c402765-96e2dbc6-b82b-47e2-a437-4834dbe0b96b-000000@us-west-2.amazonses.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Thu, 29 Dec 2022 15:33:56 +0000 (12:33 -0300)]
cifs: fix race in assemble_neg_contexts()
[ Upstream commit
775e44d6d86dca400d614cbda5dab4def4951fe7 ]
Serialise access of TCP_Server_Info::hostname in
assemble_neg_contexts() by holding the server's mutex otherwise it
might end up accessing an already-freed hostname pointer from
cifs_reconnect() or cifs_resolve_server().
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chris Wilson [Wed, 28 Dec 2022 11:34:54 +0000 (06:34 -0500)]
perf/x86/rapl: Treat Tigerlake like Icelake
[ Upstream commit
c07311b5509f6035f1dd828db3e90ff4859cf3b9 ]
Since Tigerlake seems to have inherited its cstates and other RAPL power
caps from Icelake, assume it also follows Icelake for its RAPL events.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Link: https://lore.kernel.org/r/20221228113454.1199118-1-rodrigo.vivi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaegeuk Kim [Thu, 22 Dec 2022 00:14:10 +0000 (16:14 -0800)]
f2fs: let's avoid panic if extent_tree is not created
[ Upstream commit
df9d44b645b83fffccfb4e28c1f93376585fdec8 ]
This patch avoids the below panic.
pc : __lookup_extent_tree+0xd8/0x760
lr : f2fs_do_write_data_page+0x104/0x87c
sp :
ffffffc010cbb3c0
x29:
ffffffc010cbb3e0 x28:
0000000000000000
x27:
ffffff8803e7f020 x26:
ffffff8803e7ed40
x25:
ffffff8803e7f020 x24:
ffffffc010cbb460
x23:
ffffffc010cbb480 x22:
0000000000000000
x21:
0000000000000000 x20:
ffffffff22e90900
x19:
0000000000000000 x18:
ffffffc010c5d080
x17:
0000000000000000 x16:
0000000000000020
x15:
ffffffdb1acdbb88 x14:
ffffff888759e2b0
x13:
0000000000000000 x12:
ffffff802da49000
x11:
000000000a001200 x10:
ffffff8803e7ed40
x9 :
ffffff8023195800 x8 :
ffffff802da49078
x7 :
0000000000000001 x6 :
0000000000000000
x5 :
0000000000000006 x4 :
ffffffc010cbba28
x3 :
0000000000000000 x2 :
ffffffc010cbb480
x1 :
0000000000000000 x0 :
ffffff8803e7ed40
Call trace:
__lookup_extent_tree+0xd8/0x760
f2fs_do_write_data_page+0x104/0x87c
f2fs_write_single_data_page+0x420/0xb60
f2fs_write_cache_pages+0x418/0xb1c
__f2fs_write_data_pages+0x428/0x58c
f2fs_write_data_pages+0x30/0x40
do_writepages+0x88/0x190
__writeback_single_inode+0x48/0x448
writeback_sb_inodes+0x468/0x9e8
__writeback_inodes_wb+0xb8/0x2a4
wb_writeback+0x33c/0x740
wb_do_writeback+0x2b4/0x400
wb_workfn+0xe4/0x34c
process_one_work+0x24c/0x5bc
worker_thread+0x3e8/0xa50
kthread+0x150/0x1b4
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mikulas Patocka [Tue, 3 Jan 2023 15:24:11 +0000 (10:24 -0500)]
x86/asm: Fix an assembler warning with current binutils
[ Upstream commit
55d235361fccef573990dfa5724ab453866e7816 ]
Fix a warning: "found `movsd'; assuming `movsl' was meant"
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qu Wenruo [Mon, 26 Dec 2022 01:00:40 +0000 (09:00 +0800)]
btrfs: always report error in run_one_delayed_ref()
[ Upstream commit
39f501d68ec1ed5cd5c66ac6ec2a7131c517bb92 ]
Currently we have a btrfs_debug() for run_one_delayed_ref() failure, but
if end users hit such problem, there will be no chance that
btrfs_debug() is enabled. This can lead to very little useful info for
debugging.
This patch will:
- Add extra info for error reporting
Including:
* logical bytenr
* num_bytes
* type
* action
* ref_mod
- Replace the btrfs_debug() with btrfs_err()
- Move the error reporting into run_one_delayed_ref()
This is to avoid use-after-free, the @node can be freed in the caller.
This error should only be triggered at most once.
As if run_one_delayed_ref() failed, we trigger the error message, then
causing the call chain to error out:
btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs()
`- btrfs_run_delayed_refs_for_head()
`- run_one_delayed_ref()
And we will abort the current transaction in btrfs_run_delayed_refs().
If we have to run delayed refs for the abort transaction,
run_one_delayed_ref() will just cleanup the refs and do nothing, thus no
new error messages would be output.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Po-Hsu Lin [Thu, 29 Dec 2022 05:41:06 +0000 (13:41 +0800)]
selftests: net: fix cmsg_so_mark.sh test hang
[ Upstream commit
1573c6882018f69991aead951d09423ce978adac ]
This cmsg_so_mark.sh test will hang on non-amd64 systems because of the
infinity loop for argument parsing in cmsg_sender.
Variable "o" in cs_parse_args() for taking getopt() should be an int,
otherwise it will be 255 when getopt() returns -1 on non-amd64 system
and thus causing infinity loop.
Link: https://lore.kernel.org/lkml/CA+G9fYsM2k7mrF7W4V_TrZ-qDauWM394=8yEJ=-t1oUg8_40YA@mail.gmail.com/t/
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiri Slaby (SUSE) [Mon, 12 Dec 2022 12:04:11 +0000 (13:04 +0100)]
RDMA/srp: Move large values to a new enum for gcc13
[ Upstream commit
56c5dab20a6391604df9521f812c01d1e3fe1bd0 ]
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided these two:
SRP_TAG_NO_REQ = ~0U,
SRP_TAG_TSK_MGMT = 1U << 31
all other members are unsigned ints.
Esp. with SRP_MAX_SGE and SRP_TSK_MGMT_SQ_SIZE and their use in min(),
this results in the following warnings:
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:563:42: note: in expansion of macro 'min'
include/linux/minmax.h:20:35: error: comparison of distinct pointer types lacks a cast
drivers/infiniband/ulp/srp/ib_srp.c:2369:27: note: in expansion of macro 'min'
So move the large values away to a separate enum, so that they don't
affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Link: https://lore.kernel.org/r/20221212120411.13750-1-jirislaby@kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kui-Feng Lee [Fri, 16 Dec 2022 22:18:54 +0000 (14:18 -0800)]
bpf: keep a reference to the mm, in case the task is dead.
[ Upstream commit
7ff94f276f8ea05df82eb115225e9b26f47a3347 ]
Fix the system crash that happens when a task iterator travel through
vma of tasks.
In task iterators, we used to access mm by following the pointer on
the task_struct; however, the death of a task will clear the pointer,
even though we still hold the task_struct. That can cause an
unexpected crash for a null pointer when an iterator is visiting a
task that dies during the visit. Keeping a reference of mm on the
iterator ensures we always have a valid pointer to mm.
Co-developed-by: Song Liu <song@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Kui-Feng Lee <kuifeng@meta.com>
Reported-by: Nathan Slingerland <slinger@meta.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221216221855.4122288-2-kuifeng@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunhao Lin [Mon, 26 Dec 2022 12:31:53 +0000 (20:31 +0800)]
r8169: fix dmar pte write access is not set error
[ Upstream commit
bb41c13c05c23d9bc46b4e37d8914078c6a40e3a ]
When close device, if wol is enabled, rx will be enabled. When open
device it will cause rx packet to be dma to the wrong memory address
after pci_set_master() and system log will show blow messages.
DMAR: DRHD: handling fault status reg 3
DMAR: [DMA Write] Request device [02:00.0] PASID
ffffffff fault addr
ffdd4000 [fault reason 05] PTE Write access is not set
In this patch, driver disable tx/rx when close device. If wol is
enabled, only enable rx filter and disable rxdv_gate(if support) to
let hardware only receive packet to fifo but not to dma it.
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chunhao Lin [Mon, 26 Dec 2022 12:31:52 +0000 (20:31 +0800)]
r8169: move rtl_wol_enable_rx() and rtl_prepare_power_down()
[ Upstream commit
ad425666a1f05d9b215a84cf010c3789b2ea8206 ]
There is no functional change. Moving these two functions for following
patch "r8169: fix dmar pte write access is not set error".
Signed-off-by: Chunhao Lin <hau@realtek.com>
Reviewed-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Daniil Tatianin [Mon, 26 Dec 2022 11:48:23 +0000 (14:48 +0300)]
net/ethtool/ioctl: return -EOPNOTSUPP if we have no phy stats
[ Upstream commit
9deb1e9fb88b1120a908676fa33bdf9e2eeaefce ]
It's not very useful to copy back an empty ethtool_stats struct and
return 0 if we didn't actually have any stats. This also allows for
further simplification of this function in the future commits.
Signed-off-by: Daniil Tatianin <d-tatianin@yandex-team.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Cindy Lu [Wed, 14 Dec 2022 05:43:06 +0000 (13:43 +0800)]
vdpa_sim_net: should not drop the multicast/broadcast packet
[ Upstream commit
72455a1142527e607e1d69439f3ffa2ef6d09e26 ]
In the receive_filter(), should not drop the packet with the
broadcast/multicast address. Add the check for this
Signed-off-by: Cindy Lu <lulu@redhat.com>
Message-Id: <
20221214054306.24145-1-lulu@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Harshit Mogalapalli [Mon, 28 Nov 2022 15:57:15 +0000 (07:57 -0800)]
vduse: Validate vq_num in vduse_validate_config()
[ Upstream commit
937c783aa3d8d77963ec91918d3298edb45b9161 ]
Add a limit to 'config->vq_num' which is user controlled data which
comes from an vduse_ioctl to prevent large memory allocations.
Micheal says - This limit is somewhat arbitrary.
However, currently virtio pci and ccw are limited to a 16 bit vq number.
While MMIO isn't it is also isn't used with lots of VQs due to
current lack of support for per-vq interrupts.
Thus, the 0xffff limit on number of VQs corresponding
to a 16-bit VQ number seems sufficient for now.
This is found using static analysis with smatch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Message-Id: <
20221128155717.2579992-1-harshit.m.mogalapalli@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Angus Chen [Tue, 1 Nov 2022 11:16:54 +0000 (19:16 +0800)]
virtio_pci: modify ENOENT to EINVAL
[ Upstream commit
b66ead2d0ecac00c3a06a6218af5411cb5fcb5d5 ]
Virtio_crypto use max_data_queues+1 to setup vqs,
we use vp_modern_get_num_queues to protect the vq range in setup_vq.
We could enter index >= vp_modern_get_num_queues(mdev) in setup_vq
if common->num_queues is not set well,and it return -ENOENT.
It is better to use -EINVAL instead.
Signed-off-by: Angus Chen <angus.chen@jaguarmicro.com>
Message-Id: <
20221101111655.1947-1-angus.chen@jaguarmicro.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eli Cohen [Mon, 14 Nov 2022 13:17:56 +0000 (15:17 +0200)]
vdpa/mlx5: Avoid overwriting CVQ iotlb
[ Upstream commit
38fc462f57ef4e5dc722bab6824854b105de8aa2 ]
When qemu uses different address spaces for data and control virtqueues,
the current code would overwrite the control virtqueue iotlb through the
dup_iotlb call. Fix this by referring to the address space identifier
and the group to asid mapping to determine which mapping needs to be
updated. We also move the address space logic from mlx5 net to core
directory.
Reported-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <
20221114131759.57883-6-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eli Cohen [Mon, 14 Nov 2022 13:17:55 +0000 (15:17 +0200)]
vdpa/mlx5: Avoid using reslock in event_handler
[ Upstream commit
0dbc1b4ae07d003b2e88ba9d4142846320f8e349 ]
event_handler runs under atomic context and may not acquire reslock. We
can still guarantee that the handler won't be called after suspend by
clearing nb_registered, unregistering the handler and flushing the
workqueue.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <
20221114131759.57883-5-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eli Cohen [Mon, 14 Nov 2022 13:17:53 +0000 (15:17 +0200)]
vdpa/mlx5: Return error on vlan ctrl commands if not supported
[ Upstream commit
5aec804936bbff182081f1cdc271fcb76af1a4ff ]
Check if VIRTIO_NET_F_CTRL_VLAN is negotiated and return error if
control VQ command is received.
Signed-off-by: Eli Cohen <elic@nvidia.com>
Message-Id: <
20221114131759.57883-3-elic@nvidia.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ricardo Cañuelo [Wed, 12 Oct 2022 06:29:49 +0000 (08:29 +0200)]
tools/virtio: initialize spinlocks in vring_test.c
[ Upstream commit
c262f75cb6bb5a63828e72ce3b8fe808e5029479 ]
The virtio_device vqs_list spinlocks must be initialized before use to
prevent functions that manipulate the device virtualqueues, such as
vring_new_virtqueue(), from blocking indefinitely.
Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Message-Id: <
20221012062949.1526176-1-ricardo.canuelo@collabora.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anuradha Weeraman [Sun, 25 Dec 2022 17:42:22 +0000 (23:12 +0530)]
net: ethernet: marvell: octeontx2: Fix uninitialized variable warning
[ Upstream commit
d3805695fe1e7383517903715cefc9bbdcffdc90 ]
Fix for uninitialized variable warning.
Addresses-Coverity: ("Uninitialized scalar variable")
Signed-off-by: Anuradha Weeraman <anuradha@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hao Sun [Thu, 22 Dec 2022 02:44:14 +0000 (10:44 +0800)]
selftests/bpf: check null propagation only neither reg is PTR_TO_BTF_ID
[ Upstream commit
cedebd74cf3883f0384af9ec26b4e6f8f1964dd4 ]
Verify that nullness information is not porpagated in the branches
of register to register JEQ and JNE operations if one of them is
PTR_TO_BTF_ID. Implement this in C level so we can use CO-RE.
Signed-off-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20221222024414.29539-2-sunhao.th@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Olga Kornievskaia [Tue, 20 Dec 2022 17:31:29 +0000 (12:31 -0500)]
pNFS/filelayout: Fix coalescing test for single DS
[ Upstream commit
a6b9d2fa0024e7e399c26facd0fb466b7396e2b9 ]
When there is a single DS no striping constraints need to be placed on
the IO. When such constraint is applied then buffered reads don't
coalesce to the DS's rsize.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johannes Berg [Tue, 13 Dec 2022 21:15:04 +0000 (23:15 +0200)]
wifi: iwlwifi: fw: skip PPAG for JF
[ Upstream commit
1c4c0b28b517d778d37900deedfe91088839f07a ]
For JF RFs we don't support PPAG, but many firmware
images lie about it. Always skip support for JF to
avoid firmware errors when sending the command.
Reported-and-tested-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/linux-wireless/CACT4oufQsqHGp6bah2c4+jPn2wG1oZqY=UKa_TmPx=F6Lxng8Q@mail.gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20221213225723.2a43415d8990.I9ac210740a45b41f1b2e15274e1daf4284f2808a@changeid
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naohiro Aota [Wed, 14 Dec 2022 02:06:07 +0000 (11:06 +0900)]
btrfs: fix trace event name typo for FLUSH_DELAYED_REFS
[ Upstream commit
0a3212de8ab3e2ce5808c6265855e528d4a6767b ]
Fix a typo of printing FLUSH_DELAYED_REFS event in flush_space() as
FLUSH_ELAYED_REFS.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christian König [Tue, 6 Dec 2022 13:07:49 +0000 (14:07 +0100)]
dma-buf: fix dma_buf_export init order v2
[ Upstream commit
f728a5ea27c92133893590e731ce10f6561ced87 ]
The init order and resulting error handling in dma_buf_export
was pretty messy.
Subordinate objects like the file and the sysfs kernel objects
were initializing and wiring itself up with the object in the
wrong order resulting not only in complicating and partially
incorrect error handling, but also in publishing only halve
initialized DMA-buf objects.
Clean this up thoughtfully by allocating the file independent
of the DMA-buf object. Then allocate and initialize the DMA-buf
object itself, before publishing it through sysfs. If everything
works as expected the file is then connected with the DMA-buf
object and publish it through debugfs.
Also adds the missing dma_resv_fini() into the error handling.
v2: add some missing changes to dma_bug_getfile() and a missing NULL
check in dma_buf_file_release()
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: T.J. Mercier <tjmercier@google.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221209071535.933698-1-christian.koenig@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Wed, 18 Jan 2023 10:58:34 +0000 (11:58 +0100)]
Linux 6.1.7
Link: https://lore.kernel.org/r/20230116154803.321528435@linuxfoundation.org
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Rudi Heitbaum <rudi@heitbaum.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Allen Pais <apais@linux.microsoft.com>
Link: https://lore.kernel.org/r/20230117124546.116438951@linuxfoundation.org
Tested-by: Allen Pais <apais@linux.microsoft.com>
Tested-by: Ronald Warsow <rwarsow@gmx.de>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Takeshi Ogasawara <takeshi.ogasawara@futuring-girl.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Kelsey Steele <kelseysteele@linux.microsoft.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Tested-by: Fenil Jain <fkjainco@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mario Limonciello [Thu, 13 Oct 2022 13:47:29 +0000 (08:47 -0500)]
pinctrl: amd: Add dynamic debugging for active GPIOs
commit
1d66e379731f79ae5039a869c0fde22a4f6a6a91 upstream.
Some laptops have been reported to wake up from s2idle when plugging
in the AC adapter or by closing the lid. This is a surprising
behavior that is further clarified by commit
cb3e7d624c3ff ("PM:
wakeup: Add extra debugging statement for multiple active IRQs").
With that commit in place the following interaction can be seen
when the lid is closed:
[ 28.946038] PM: suspend-to-idle
[ 28.946083] ACPI: EC: ACPI EC GPE status set
[ 28.946101] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.950152] Timekeeping suspended for 3.320 seconds
[ 28.950152] PM: Triggering wakeup from IRQ 9
[ 28.950152] ACPI: EC: ACPI EC GPE status set
[ 28.950152] ACPI: EC: ACPI EC GPE dispatched
[ 28.995057] ACPI: EC: ACPI EC work flushed
[ 28.995075] ACPI: PM: Rearming ACPI SCI for wakeup
[ 28.995131] PM: Triggering wakeup from IRQ 9
[ 28.995271] ACPI: EC: ACPI EC GPE status set
[ 28.995291] ACPI: EC: ACPI EC GPE dispatched
[ 29.098556] ACPI: EC: ACPI EC work flushed
[ 29.207020] ACPI: EC: ACPI EC work flushed
[ 29.207037] ACPI: PM: Rearming ACPI SCI for wakeup
[ 29.211095] Timekeeping suspended for 0.739 seconds
[ 29.211095] PM: Triggering wakeup from IRQ 9
[ 29.211079] PM: Triggering wakeup from IRQ 7
[ 29.211095] ACPI: PM: ACPI non-EC GPE wakeup
[ 29.211095] PM: resume from suspend-to-idle
* IRQ9 on this laptop is used for the ACPI SCI.
* IRQ7 on this laptop is used for the GPIO controller.
What has occurred is when the lid was closed the EC woke up the
SoC from it's deepest sleep state and the kernel's s2idle loop
processed all EC events. When it was finished processing EC events,
it checked for any other reasons to wake (break the s2idle loop).
The IRQ for the GPIO controller was active so the loop broke, and
then this IRQ was processed. This is not a kernel bug but it is
certainly a surprising behavior, and to better debug it we should
have a dynamic debugging message that we can enact to catch it.
Acked-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221013134729.5592-2-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ferry Toth [Thu, 22 Dec 2022 20:53:02 +0000 (21:53 +0100)]
Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"
commit
b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream.
This reverts commit
8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac.
This patch results in some qemu test failures, specifically xilinx-zynq-a9
machine and zynq-zc702 as well as zynq-zed devicetree files, when trying
to boot from USB drive.
Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/
Fixes:
8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout")
Cc: stable@vger.kernel.org
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ferry Toth <ftoth@exalondelft.nl>
Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Wed, 4 Jan 2023 15:51:19 +0000 (08:51 -0700)]
block: handle bio_split_to_limits() NULL return
commit
613b14884b8595e20b9fac4126bf627313827fbe upstream.
This can't happen right now, but in preparation for allowing
bio_split_to_limits() returning NULL if it ended the bio, check for it
in all the callers.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sun, 8 Jan 2023 17:39:17 +0000 (10:39 -0700)]
io_uring/io-wq: only free worker if it was allocated for creation
commit
e6db6f9398dadcbc06318a133d4c44a2d3844e61 upstream.
We have two types of task_work based creation, one is using an existing
worker to setup a new one (eg when going to sleep and we have no free
workers), and the other is allocating a new worker. Only the latter
should be freed when we cancel task_work creation for a new worker.
Fixes:
af82425c6a2d ("io_uring/io-wq: free worker if task_work creation is canceled")
Reported-by: syzbot+d56ec896af3637bdb7e4@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Mon, 2 Jan 2023 23:49:46 +0000 (16:49 -0700)]
io_uring/io-wq: free worker if task_work creation is canceled
commit
af82425c6a2d2f347c79b63ce74fca6dc6be157f upstream.
If we cancel the task_work, the worker will never come into existance.
As this is the last reference to it, ensure that we get it freed
appropriately.
Cc: stable@vger.kernel.org
Reported-by: 진호 <wnwlsgh98@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nathan Chancellor [Tue, 25 Oct 2022 19:50:15 +0000 (21:50 +0200)]
drm/i915: Fix CFI violations in gt_sysfs
commit
a8a4f0467d706fc22d286dfa973946e5944b793c upstream.
When booting with CONFIG_CFI_CLANG, there are numerous violations when
accessing the files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0:
$ cd /sys/devices/pci0000:00/0000:00:02.0/drm/card0/gt/gt0
$ grep . *
id:0
punit_req_freq_mhz:350
rc6_enable:1
rc6_residency_ms:214934
rps_act_freq_mhz:1300
rps_boost_freq_mhz:1300
rps_cur_freq_mhz:350
rps_max_freq_mhz:1300
rps_min_freq_mhz:350
rps_RP0_freq_mhz:1300
rps_RP1_freq_mhz:350
rps_RPn_freq_mhz:350
throttle_reason_pl1:0
throttle_reason_pl2:0
throttle_reason_pl4:0
throttle_reason_prochot:0
throttle_reason_ratl:0
throttle_reason_status:0
throttle_reason_thermal:0
throttle_reason_vr_tdc:0
throttle_reason_vr_thermalert:0
$ sudo dmesg &| grep "CFI failure at"
[ 214.595903] CFI failure at kobj_attr_show+0x19/0x30 (target: id_show+0x0/0x70 [i915]; expected type: 0xc527b809)
[ 214.596064] CFI failure at kobj_attr_show+0x19/0x30 (target: punit_req_freq_mhz_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596407] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_enable_show+0x0/0x40 [i915]; expected type: 0xc527b809)
[ 214.596528] CFI failure at kobj_attr_show+0x19/0x30 (target: rc6_residency_ms_show+0x0/0x270 [i915]; expected type: 0xc527b809)
[ 214.596682] CFI failure at kobj_attr_show+0x19/0x30 (target: act_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596792] CFI failure at kobj_attr_show+0x19/0x30 (target: boost_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596893] CFI failure at kobj_attr_show+0x19/0x30 (target: cur_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.596996] CFI failure at kobj_attr_show+0x19/0x30 (target: max_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597099] CFI failure at kobj_attr_show+0x19/0x30 (target: min_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597198] CFI failure at kobj_attr_show+0x19/0x30 (target: RP0_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597301] CFI failure at kobj_attr_show+0x19/0x30 (target: RP1_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597405] CFI failure at kobj_attr_show+0x19/0x30 (target: RPn_freq_mhz_show+0x0/0xe0 [i915]; expected type: 0xc527b809)
[ 214.597538] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597701] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597836] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.597952] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598071] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598177] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598307] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598439] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
[ 214.598542] CFI failure at kobj_attr_show+0x19/0x30 (target: throttle_reason_bool_show+0x0/0x50 [i915]; expected type: 0xc527b809)
With kCFI, indirect calls are validated against their expected type
versus actual type and failures occur when the two types do not match.
The ultimate issue is that these sysfs functions are expecting to be
called via dev_attr_show() but they may also be called via
kobj_attr_show(), as certain files are created under two different
kobjects that have two different sysfs_ops in intel_gt_sysfs_register(),
hence the warnings above. When accessing the gt_ files under
/sys/devices/pci0000:00/0000:00:02.0/drm/card0, which are using the same
sysfs functions, there are no violations, meaning the functions are
being called with the proper type.
To make everything work properly, adjust certain functions to match the
type of the ->show() and ->store() members in 'struct kobj_attribute'.
Add a macro to generate functions for that can be called via both
dev_attr_{show,store}() or kobj_attr_{show,store}() so that they can be
called through both kobject locations without violating kCFI and adjust
the attribute groups to account for this.
Link: https://github.com/ClangBuiltLinux/linux/issues/1716
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221013205909.1282545-1-nathan@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sat, 14 Jan 2023 15:46:14 +0000 (08:46 -0700)]
io_uring/poll: attempt request issue after racy poll wakeup
commit
6e5aedb9324aab1c14a23fae3d8eeb64a679c20e upstream.
If we have multiple requests waiting on the same target poll waitqueue,
then it's quite possible to get a request triggered and get disappointed
in not being able to make any progress with it. If we race in doing so,
we'll potentially leave the poll request on the internal tables, but
removed from the waitqueue. That means that any subsequent trigger of
the poll waitqueue will not kick that request into action, causing an
application to potentially wait for completion of a request that will
never happen.
Fix this by adding a new poll return state, IOU_POLL_REISSUE. Rather
than have complicated logic for how to re-arm a given type of request,
just punt it for a reissue.
While in there, move the 'ret' variable to the only section where it
gets used. This avoids confusion the scope of it.
Cc: stable@vger.kernel.org
Fixes:
eb0089d629ba ("io_uring: single shot poll removal optimisation")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pavel Begunkov [Sat, 14 Jan 2023 15:41:33 +0000 (08:41 -0700)]
io_uring: lock overflowing for IOPOLL
commit
544d163d659d45a206d8929370d5a2984e546cb7 upstream.
syzbot reports an issue with overflow filling for IOPOLL:
WARNING: CPU: 0 PID: 28 at io_uring/io_uring.c:734 io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
CPU: 0 PID: 28 Comm: kworker/u4:1 Not tainted 6.2.0-rc3-syzkaller-16369-g358a161a6a9e #0
Workqueue: events_unbound io_ring_exit_work
Call trace:
io_cqring_event_overflow+0x1c0/0x230 io_uring/io_uring.c:734
io_req_cqe_overflow+0x5c/0x70 io_uring/io_uring.c:773
io_fill_cqe_req io_uring/io_uring.h:168 [inline]
io_do_iopoll+0x474/0x62c io_uring/rw.c:1065
io_iopoll_try_reap_events+0x6c/0x108 io_uring/io_uring.c:1513
io_uring_try_cancel_requests+0x13c/0x258 io_uring/io_uring.c:3056
io_ring_exit_work+0xec/0x390 io_uring/io_uring.c:2869
process_one_work+0x2d8/0x504 kernel/workqueue.c:2289
worker_thread+0x340/0x610 kernel/workqueue.c:2436
kthread+0x12c/0x158 kernel/kthread.c:376
ret_from_fork+0x10/0x20 arch/arm64/kernel/entry.S:863
There is no real problem for normal IOPOLL as flush is also called with
uring_lock taken, but it's getting more complicated for IOPOLL|SQPOLL,
for which __io_cqring_overflow_flush() happens from the CQ waiting path.
Reported-and-tested-by: syzbot+6805087452d72929404e@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Mon, 19 Dec 2022 09:10:04 +0000 (10:10 +0100)]
efi: fix NULL-deref in init error path
[ Upstream commit
703c13fe3c9af557d312f5895ed6a5fda2711104 ]
In cases where runtime services are not supported or have been disabled,
the runtime services workqueue will never have been allocated.
Do not try to destroy the workqueue unconditionally in the unlikely
event that EFI initialisation fails to avoid dereferencing a NULL
pointer.
Fixes:
98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails")
Cc: stable@vger.kernel.org
Cc: Li Heng <liheng40@huawei.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jaroslav Kysela [Fri, 13 Jan 2023 08:53:11 +0000 (09:53 +0100)]
ALSA: usb-audio: Fix possible NULL pointer dereference in snd_usb_pcm_has_fixed_rate()
[ Upstream commit
92a9c0ad86d47ff4cce899012e355c400f02cfb8 ]
The subs function argument may be NULL, so do not use it before the NULL check.
Fixes:
291e9da91403 ("ALSA: usb-audio: Always initialize fixed_rate in snd_usb_find_implicit_fb_sync_format()")
Reported-by: coverity-bot <keescook@chromium.org>
Link: https://lore.kernel.org/alsa-devel/202301121424.4A79A485@keescook/
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230113085311.623325-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miaoqian Lin [Thu, 29 Dec 2022 07:25:33 +0000 (11:25 +0400)]
platform/x86/amd: Fix refcount leak in amd_pmc_probe
[ Upstream commit
ccb32e2be14271a60e9ba89c6d5660cc9998773c ]
pci_get_domain_bus_and_slot() takes reference, the caller should release
the reference by calling pci_dev_put() after use. Call pci_dev_put() in
the error path to fix this.
Fixes:
3d7d407dfb05 ("platform/x86: amd-pmc: Add support for AMD Spill to DRAM STB feature")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221229072534.1381432-1-linmq006@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maximilian Luz [Tue, 20 Dec 2022 17:56:07 +0000 (18:56 +0100)]
platform/surface: aggregator: Add missing call to ssam_request_sync_free()
[ Upstream commit
c965daac370f08a9b71d573a71d13cda76f2a884 ]
Although rare, ssam_request_sync_init() can fail. In that case, the
request should be freed via ssam_request_sync_free(). Currently it is
leaked instead. Fix this.
Fixes:
c167b9c7e3d6 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20221220175608.1436273-1-luzmaximilian@gmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jakub Kicinski [Wed, 11 Jan 2023 04:25:47 +0000 (20:25 -0800)]
bnxt: make sure we return pages to the pool
[ Upstream commit
97f5e03a4a27d27ee4fed0cdb1658c81cf2784db ]
Before the commit under Fixes the page would have been released
from the pool before the napi_alloc_skb() call, so normal page
freeing was fine (released page == no longer in the pool).
After the change we just mark the page for recycling so it's still
in the pool if the skb alloc fails, we need to recycle.
Same commit added the same bug in the new bnxt_rx_multi_page_skb().
Fixes:
1dc4c557bfed ("bnxt: adding bnxt_xdp_build_skb to build skb from multibuffer xdp_buff")
Reviewed-by: Andy Gospodarek <gospo@broadcom.com>
Link: https://lore.kernel.org/r/20230111042547.987749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jie Wang [Tue, 10 Jan 2023 11:53:59 +0000 (19:53 +0800)]
net: hns3: fix wrong use of rss size during VF rss config
[ Upstream commit
ae9f29fdfd827ad06c1ae8155c042245a9d00757 ]
Currently, it used old rss size to get current tc mode. As a result, the
rss size is updated, but the tc mode is still configured based on the old
rss size.
So this patch fixes it by using the new rss size in both process.
Fixes:
93969dc14fcd ("net: hns3: refactor VF rss init APIs with new common rss init APIs")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Hao Lan <lanhao@huawei.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230110115359.10163-1-lanhao@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Clément Léger [Mon, 9 Jan 2023 15:32:23 +0000 (16:32 +0100)]
net: lan966x: check for ptp to be enabled in lan966x_ptp_deinit()
[ Upstream commit
b0e380b5d4275299adf43e249f18309331b6f54f ]
If ptp was not enabled due to missing IRQ for instance,
lan966x_ptp_deinit() will dereference NULL pointers.
Fixes:
d096459494a8 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Christopher S Hall [Wed, 14 Dec 2022 08:10:38 +0000 (16:10 +0800)]
igc: Fix PPS delta between two synchronized end-points
[ Upstream commit
5e91c72e560cc85f7163bbe3d14197268de31383 ]
This patch fix the pulse per second output delta between
two synchronized end-points.
Based on Intel Discrete I225 Software User Manual Section
4.2.15 TimeSync Auxiliary Control Register, ST0[Bit 4] and
ST1[Bit 7] must be set to ensure that clock output will be
toggles based on frequency value defined. This is to ensure
that output of the PPS is aligned with the clock.
How to test:
1) Running time synchronization on both end points.
Ex: ptp4l --step_threshold=1 -m -f gPTP.cfg -i <interface name>
2) Configure PPS output using below command for both end-points
Ex: SDP0 on I225 REV4 SKU variant
./testptp -d /dev/ptp0 -L 0,2
./testptp -d /dev/ptp0 -p
1000000000
3) Measure the output using analyzer for both end-points
Fixes:
87938851b6ef ("igc: enable auxiliary PHC functions for the i225")
Signed-off-by: Christopher S Hall <christopher.s.hall@intel.com>
Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Yan [Sun, 8 Jan 2023 06:24:00 +0000 (14:24 +0800)]
perf kmem: Support field "node" in evsel__process_alloc_event() coping with recent tracepoint restructuring
[ Upstream commit
dce088ab0d51ae3b14fb2bd608e9c649aadfe5dc ]
Commit
11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") adds the field "node" into the tracepoints 'kmalloc' and
'kmem_cache_alloc', so this patch modifies the event process function to
support the field "node".
If field "node" is detected by checking function evsel__field(), it
stats the cross allocation.
When the "node" value is NUMA_NO_NODE (-1), it means the memory can be
allocated from any memory node, in this case, we don't account it as a
cross allocation.
Fixes:
11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Leo Yan [Sun, 8 Jan 2023 06:23:59 +0000 (14:23 +0800)]
perf kmem: Support legacy tracepoints
[ Upstream commit
b3719108ae60169eda5c941ca5e1be1faa371c57 ]
Commit
11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of
tracepoints") removed tracepoints 'kmalloc_node' and
'kmem_cache_alloc_node', we need to consider the tool should be backward
compatible.
If it detect the tracepoint "kmem:kmalloc_node", this patch enables the
legacy tracepoints, otherwise, it will ignore them.
Fixes:
11e9734bcb6a7361 ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Reported-by: Ravi Bangoria <ravi.bangoria@amd.com>
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lore.kernel.org/r/20230108062400.250690-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ian Rogers [Fri, 6 Jan 2023 15:13:19 +0000 (07:13 -0800)]
perf build: Properly guard libbpf includes
[ Upstream commit
d891f2b724b39a2a41e3ad7b57110193993242ff ]
Including libbpf header files should be guarded by HAVE_LIBBPF_SUPPORT.
In bpf_counter.h, move the skeleton utilities under HAVE_BPF_SKEL.
Fixes:
d6a735ef3277c45f ("perf bpf_counter: Move common functions to bpf_counter.h")
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Mike Leach <mike.leach@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20230105172243.7238-1-mike.leach@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hariprasad Kelam [Mon, 9 Jan 2023 06:13:25 +0000 (11:43 +0530)]
octeontx2-pf: Fix resource leakage in VF driver unbind
[ Upstream commit
53da7aec32982f5ee775b69dce06d63992ce4af3 ]
resources allocated like mcam entries to support the Ntuple feature
and hash tables for the tc feature are not getting freed in driver
unbind. This patch fixes the issue.
Fixes:
2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20230109061325.21395-1-hkelam@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Sun, 8 Jan 2023 15:45:50 +0000 (16:45 +0100)]
selftests/net: l2_tos_ttl_inherit.sh: Ensure environment cleanup on failure.
[ Upstream commit
d68ff8ad3351b8fc8d6f14b9a4f5cc8ba3e8bd13 ]
Use 'set -e' and an exit handler to stop the script if a command fails
and ensure the test environment is cleaned up in any case. Also, handle
the case where the script is interrupted by SIGINT.
The only command that's expected to fail is 'wait $ping_pid', since
it's killed by the script. Handle this case with '|| true' to make it
play well with 'set -e'.
Finally, return the Kselftest SKIP code (4) when the script breaks
because of an environment problem or a command line failure. The 0 and
1 return codes should now reliably indicate that all tests have been
run (0: all tests run and passed, 1: all tests run but at least one
failed, 4: test script didn't run completely).
Fixes:
b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Sun, 8 Jan 2023 15:45:46 +0000 (16:45 +0100)]
selftests/net: l2_tos_ttl_inherit.sh: Run tests in their own netns.
[ Upstream commit
c53cb00f7983a5474f2d36967f84908b85af9159 ]
This selftest currently runs half in the current namespace and half in
a netns of its own. Therefore, the test can fail if the current
namespace is already configured with incompatible parameters (for
example if it already has a veth0 interface).
Adapt the script to put both ends of the veth pair in their own netns.
Now veth0 is created in NS0 instead of the current namespace, while
veth1 is set up in NS1 (instead of the 'testing' netns).
The user visible netns names are randomised to minimise the risk of
conflicts with already existing namespaces. The cleanup() function
doesn't need to remove the virtual interface anymore: deleting NS0 and
NS1 automatically removes the virtual interfaces they contained.
We can remove $ns, which was only used to run ip commands in the
'testing' netns (let's use the builtin "-netns" option instead).
However, we still need a similar functionality as ping and tcpdump
now need to run in NS0. So we now have $RUN_NS0 for that.
Fixes:
b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Guillaume Nault [Sun, 8 Jan 2023 15:45:41 +0000 (16:45 +0100)]
selftests/net: l2_tos_ttl_inherit.sh: Set IPv6 addresses with "nodad".
[ Upstream commit
e59370b2e96eb8e7e057a2a16e999ff385a3f2fb ]
The ping command can run before DAD completes. In that case, ping may
fail and break the selftest.
We don't need DAD here since we're working on isolated device pairs.
Fixes:
b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Emeel Hakim [Sun, 11 Dec 2022 11:22:23 +0000 (13:22 +0200)]
net/mlx5e: Fix macsec possible null dereference when updating MAC security entity (SecY)
[ Upstream commit
9828994ac492e8e7de47fe66097b7e665328f348 ]
Upon updating MAC security entity (SecY) in hw offload path, the macsec
security association (SA) initialization routine is called. In case of
extended packet number (epn) is enabled the salt and ssci attributes are
retrieved using the MACsec driver rx_sa context which is unavailable when
updating a SecY property such as encoding-sa hence the null dereference.
Fix by using the provided SA to set those attributes.
Fixes:
4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Emeel Hakim [Wed, 14 Dec 2022 14:34:13 +0000 (16:34 +0200)]
net/mlx5e: Fix macsec ssci attribute handling in offload path
[ Upstream commit
f5e1ed04aa2ea665a796f0109091ca3f2b01024a ]
Currently when macsec offload is set with extended packet number (epn)
enabled, the driver wrongly deduce the short secure channel identifier
(ssci) from the salt instead of the stand alone ssci attribute as it
should, consequently creating a mismatch between the kernel and driver's
ssci values.
Fix by using the ssci value from the relevant attribute.
Fixes:
4411a6c0abd3 ("net/mlx5e: Support MACsec offload extended packet number (EPN)")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Gavin Li [Tue, 27 Dec 2022 02:54:09 +0000 (04:54 +0200)]
net/mlx5e: Don't support encap rules with gbp option
[ Upstream commit
d515d63cae2cd186acf40deaa8ef33067bb7f637 ]
Previously, encap rules with gbp option would be offloaded by mistake but
driver does not support gbp option offload.
To fix this issue, check if the encap rule has gbp option and don't
offload the rule
Fixes:
d8f9dfae49ce ("net: sched: allow flower to match vxlan options")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rahul Rameshbabu [Mon, 5 Dec 2022 22:26:09 +0000 (14:26 -0800)]
net/mlx5: Fix ptp max frequency adjustment range
[ Upstream commit
fe91d57277eef8bb4aca05acfa337b4a51d0bba4 ]
.max_adj of ptp_clock_info acts as an absolute value for the amount in ppb
that can be set for a single call of .adjfine. This means that a single
call to .getfine cannot be greater than .max_adj or less than -(.max_adj).
Provides correct value for max frequency adjustment value supported by
devices.
Fixes:
3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Wed, 23 Nov 2022 14:59:13 +0000 (16:59 +0200)]
net/mlx5e: IPoIB, Fix child PKEY interface stats on rx path
[ Upstream commit
b5e23931c45a2f99f60a2f2b98a9e4d5a62a5b13 ]
The current code always does the accounting using the
stats from the parent interface (linked in the rq). This
doesn't work when there are child interfaces configured.
Fix this behavior by always using the stats from the child
interface priv. This will also work for parent only
interfaces: the child (netdev) and parent netdev (rq->netdev)
will point to the same thing.
Fixes:
be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Fri, 25 Nov 2022 15:51:19 +0000 (17:51 +0200)]
net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent
[ Upstream commit
31c70bfe58ef09fe36327ddcced9143a16e9e83d ]
A user is able to configure an arbitrary number of rx queues when
creating an interface via netlink. This doesn't work for child PKEY
interfaces because the child interface uses the parent receive channels.
Although the child shares the parent's receive channels, the number of
rx queues is important for the channel_stats array: the parent's rx
channel index is used to access the child's channel_stats. So the array
has to be at least as large as the parent's rx queue size for the
counting to work correctly and to prevent out of bound accesses.
This patch checks for the mentioned scenario and returns an error when
trying to create the interface. The error is propagated to the user.
Fixes:
be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dragos Tatulea [Thu, 15 Dec 2022 11:02:38 +0000 (13:02 +0200)]
net/mlx5e: IPoIB, Block queue count configuration when sub interfaces are present
[ Upstream commit
806a8df7126a8c05d60411eeb81057c2a8bbe7a7 ]
PKEY sub interfaces share the receive queues with the parent interface.
While setting the sub interface queue count is not supported, it is
currently possible to change the number of queues of the parent interface.
Thus we can end up with inconsistent queue sizes between the parent and its
sub interfaces.
This change disallows setting the queue count on the parent interface when
sub interfaces are present.
This is achieved by introducing an explicit reference to the parent netdev
in the mlx5i_priv of the child interface. An additional counter is also
required on the parent side to detect when sub interfaces are attached and
for proper cleanup.
The rtnl lock is taken during the ethtool op and the sub interface
ndo_init/uninit ops. There is no race here around counting the sub
interfaces, reading the sub interfaces and setting the number of
channels. The ASSERT_RTNL was added to document that.
Fixes:
be98737a4faa ("net/mlx5e: Use dynamic per-channel allocations in stats")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roy Novich [Wed, 4 Jan 2023 09:16:21 +0000 (11:16 +0200)]
net/mlx5e: Verify dev is present for fix features ndo
[ Upstream commit
ab4b01bfdaa69492fb36484026b0a0f0af02d75a ]
The native NIC port net device instance is being used as Uplink
representor. While changing profiles private resources are not
available, fix features ndo does not check if the netdev is present.
Add driver protection to verify private resources are ready.
Fixes:
7a9fb35e8c3a ("net/mlx5e: Do not reload ethernet ports when changing eswitch mode")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Moshe Shemesh [Mon, 28 Nov 2022 17:05:47 +0000 (19:05 +0200)]
net/mlx5: Fix command stats access after free
[ Upstream commit
da2e552b469a0cd130ff70a88ccc4139da428a65 ]
Command may fail while driver is reloading and can't accept FW commands
till command interface is reinitialized. Such command failure is being
logged to command stats. This results in NULL pointer access as command
stats structure is being freed and reallocated during mlx5 devlink
reload (see kernel log below).
Fix it by making command stats statically allocated on driver probe.
Kernel log:
[ 2394.808802] BUG: unable to handle kernel paging request at
000000000002a9c0
[ 2394.810610] PGD 0 P4D 0
[ 2394.811811] Oops: 0002 [#1] SMP NOPTI
...
[ 2394.815482] RIP: 0010:native_queued_spin_lock_slowpath+0x183/0x1d0
...
[ 2394.829505] Call Trace:
[ 2394.830667] _raw_spin_lock_irq+0x23/0x26
[ 2394.831858] cmd_status_err+0x55/0x110 [mlx5_core]
[ 2394.833020] mlx5_access_reg+0xe7/0x150 [mlx5_core]
[ 2394.834175] mlx5_query_port_ptys+0x78/0xa0 [mlx5_core]
[ 2394.835337] mlx5e_ethtool_get_link_ksettings+0x74/0x590 [mlx5_core]
[ 2394.836454] ? kmem_cache_alloc_trace+0x140/0x1c0
[ 2394.837562] __rh_call_get_link_ksettings+0x33/0x100
[ 2394.838663] ? __rtnl_unlock+0x25/0x50
[ 2394.839755] __ethtool_get_link_ksettings+0x72/0x150
[ 2394.840862] duplex_show+0x6e/0xc0
[ 2394.841963] dev_attr_show+0x1c/0x40
[ 2394.843048] sysfs_kf_seq_show+0x9b/0x100
[ 2394.844123] seq_read+0x153/0x410
[ 2394.845187] vfs_read+0x91/0x140
[ 2394.846226] ksys_read+0x4f/0xb0
[ 2394.847234] do_syscall_64+0x5b/0x1a0
[ 2394.848228] entry_SYSCALL_64_after_hwframe+0x65/0xca
Fixes:
34f46ae0d4b3 ("net/mlx5: Add command failures data to debugfs")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ariel Levkovich [Mon, 29 Aug 2022 21:32:30 +0000 (00:32 +0300)]
net/mlx5e: TC, Keep mod hdr actions after mod hdr alloc
[ Upstream commit
5e72f3f1c558019082cfeedeed73748f35d780c6 ]
When offloading TC NIC rule which has mod_hdr action, the
mod_hdr actions list is freed upon mod_hdr allocation.
In the new format of handling multi table actions and CT in
particular, the mod_hdr actions list is still relevant when
setting the pre and post rules and therefore, freeing the list
may cause adding rules which don't set the FTE_ID.
Therefore, the mod_hdr actions list needs to be kept for the
pre/post flows as well and should be left for these handler to
be freed.
Fixes:
8300f225268b ("net/mlx5e: Create new flow attr for multi table actions")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ariel Levkovich [Tue, 16 Aug 2022 20:19:11 +0000 (23:19 +0300)]
net/mlx5: check attr pointer validity before dereferencing it
[ Upstream commit
e0bf81bf0d3d4747c146e0bf44774d3d881d7137 ]
Fix attr pointer validity checks after it was already
dereferenced.
Fixes:
cb0d54cbf948 ("net/mlx5e: Fix wrong source vport matching on tunnel rule")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiner Kallweit [Sun, 8 Jan 2023 19:37:53 +0000 (20:37 +0100)]
Revert "r8169: disable detection of chip version 36"
[ Upstream commit
2ea26b4de6f42b74a5f1701de41efa6bc9f12666 ]
This reverts commit
42666b2c452ce87894786aae05e3fad3cfc6cb59.
This chip version seems to be very rare, but it exits in consumer
devices, see linked report.
Link: https://stackoverflow.com/questions/75049473/cant-setup-a-wired-network-in-archlinux-fresh-install
Fixes:
42666b2c452c ("r8169: disable detection of chip version 36")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/42e9674c-d5d0-a65a-f578-e5c74f244739@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ido Schimmel [Sat, 7 Jan 2023 17:10:04 +0000 (19:10 +0200)]
net/sched: act_mpls: Fix warning during failed attribute validation
[ Upstream commit
9e17f99220d111ea031b44153fdfe364b0024ff2 ]
The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a
validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid
combination according to the comment above 'struct nla_policy':
"
Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN:
NLA_BINARY Validation function called for the attribute.
All other Unused - but note that it's a union
"
This can trigger the warning [1] in nla_get_range_unsigned() when
validation of the attribute fails. Despite being of 'NLA_U32' type, the
associated 'min'/'max' fields in the policy are negative as they are
aliased by the 'validate' field.
Fix by changing the attribute type to 'NLA_BINARY' which is consistent
with the above comment and all other users of NLA_POLICY_VALIDATE_FN().
As a result, move the length validation to the validation function.
No regressions in MPLS tests:
# ./tdc.py -f tc-tests/actions/mpls.json
[...]
# echo $?
0
[1]
WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118
nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
Modules linked in:
CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014
RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117
[...]
Call Trace:
<TASK>
__netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310
netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411
netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline]
netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506
netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0x38f/0x500 net/socket.c:2482
___sys_sendmsg net/socket.c:2536 [inline]
__sys_sendmsg+0x197/0x230 net/socket.c:2565
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/
Fixes:
2a2ea50870ba ("net: sched: add mpls manipulation actions to TC")
Reported-by: Wei Chen <harperchen1110@gmail.com>
Tested-by: Wei Chen <harperchen1110@gmail.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zack Rusin [Wed, 7 Dec 2022 17:29:07 +0000 (12:29 -0500)]
drm/vmwgfx: Remove rcu locks from user resources
[ Upstream commit
a309c7194e8a2f8bd4539b9449917913f6c2cd50 ]
User resource lookups used rcu to avoid two extra atomics. Unfortunately
the rcu paths were buggy and it was easy to make the driver crash by
submitting command buffers from two different threads. Because the
lookups never show up in performance profiles replace them with a
regular spin lock which fixes the races in accesses to those shared
resources.
Fixes kernel oops'es in IGT's vmwgfx execution_buffer stress test and
seen crashes with apps using shared resources.
Fixes:
e14c02e6b699 ("drm/vmwgfx: Look up objects without taking a reference")
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221207172907.959037-1-zack@kde.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maaz Mombasawala [Sat, 22 Oct 2022 04:02:30 +0000 (00:02 -0400)]
drm/vmwgfx: Remove vmwgfx_hashtab
[ Upstream commit
9da30cdd6a318595199319708c143ae318f804ef ]
The vmwgfx driver has migrated from using the hashtable in vmwgfx_hashtab
to the linux/hashtable implementation. Remove the vmwgfx_hashtab from the
driver.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-12-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maaz Mombasawala [Sat, 22 Oct 2022 04:02:29 +0000 (00:02 -0400)]
drm/vmwgfx: Refactor ttm reference object hashtable to use linux/hashtable.
[ Upstream commit
76a9e07f270cf5fb556ac237dbf11f5dacd61fef ]
This is part of an effort to move from the vmwgfx_open_hash hashtable to
linux/hashtable implementation.
Refactor the ref_hash hashtable, used for fast lookup of reference objects
associated with a ttm file.
This also exposed a problem related to inconsistently using 32-bit and
64-bit keys with this hashtable. The hash function used changes depending
on the size of the type, and results are not consistent across numbers,
for example, hash_32(329) = 329, but hash_long(329) = 328. This would
cause the lookup to fail for objects already in the hashtable, since keys
of different sizes were being passed during adding and lookup. This was
not an issue before because vmwgfx_open_hash always used hash_long.
Fix this by always using 64-bit keys for this hashtable, which means that
hash_long is always used.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-11-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maaz Mombasawala [Sat, 22 Oct 2022 04:02:24 +0000 (00:02 -0400)]
drm/vmwgfx: Refactor resource validation hashtable to use linux/hashtable implementation.
[ Upstream commit
9e931f2e09701e25744f3d186a4ba13b5342b136 ]
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenence burden.
As part of this effort, refactor the res_ht hashtable used for resource
validation during execbuf execution to use linux/hashtable implementation.
This also refactors vmw_validation_context to use vmw_sw_context as the
container for the hashtable, whereas before it used a vmwgfx_open_hash
directly. This makes vmw_validation_context less generic, but there is
no functional change since res_ht is the only instance where validation
context used a hashtable in vmwgfx driver.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-6-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maaz Mombasawala [Sat, 22 Oct 2022 04:02:23 +0000 (00:02 -0400)]
drm/vmwgfx: Remove ttm object hashtable
[ Upstream commit
931e09d8d5b4aa19bdae0234f2727049f1cd13d9 ]
The object_hash hashtable for ttm objects is not being used.
Remove it and perform refactoring in ttm_object init function.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-5-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Maaz Mombasawala [Sat, 22 Oct 2022 04:02:22 +0000 (00:02 -0400)]
drm/vmwgfx: Refactor resource manager's hashtable to use linux/hashtable implementation.
[ Upstream commit
43531dc661b7fb6be249c023bf25847b38215545 ]
Vmwgfx's hashtab implementation needs to be replaced with linux/hashtable
to reduce maintenance burden.
Refactor cmdbuf resource manager to use linux/hashtable.h implementation
as part of this effort.
Signed-off-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-4-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Zack Rusin [Sat, 22 Oct 2022 04:02:20 +0000 (00:02 -0400)]
drm/vmwgfx: Write the driver id registers
[ Upstream commit
7f4c33778686cc2d34cb4ef65b4265eea874c159 ]
Driver id registers are a new mechanism in the svga device to hint to the
device which driver is running. This should not change device behavior
in any way, but might be convenient to work-around specific bugs
in guest drivers.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221022040236.616490-2-zack@kde.org
Stable-dep-of:
a309c7194e8a ("drm/vmwgfx: Remove rcu locks from user resources")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiasheng Jiang [Thu, 8 Dec 2022 13:35:52 +0000 (21:35 +0800)]
ice: Add check for kzalloc
[ Upstream commit
40543b3d9d2c13227ecd3aa90a713c201d1d7f09 ]
Add the check for the return value of kzalloc in order to avoid
NULL pointer dereference.
Moreover, use the goto-label to share the clean code.
Fixes:
d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yuan Can [Wed, 7 Dec 2022 08:55:02 +0000 (08:55 +0000)]
ice: Fix potential memory leak in ice_gnss_tty_write()
[ Upstream commit
f58985620f55580a07d40062c4115d8c9cf6ae27 ]
The ice_gnss_tty_write() return directly if the write_buf alloc failed,
leaking the cmd_buf.
Fix by free cmd_buf if write_buf alloc failed.
Fixes:
d6b98c8d242a ("ice: add write functionality for GNSS TTY")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Luben Tuikov [Wed, 4 Jan 2023 22:09:02 +0000 (17:09 -0500)]
drm/amdgpu: Fix potential NULL dereference
[ Upstream commit
0be7ed8e7eb15282b5d0f6fdfea884db594ea9bf ]
Fix potential NULL dereference, in the case when "man", the resource manager
might be NULL, when/if we print debug information.
Cc: Alex Deucher <Alexander.Deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: AMD Graphics <amd-gfx@lists.freedesktop.org>
Cc: Dan Carpenter <error27@gmail.com>
Cc: kernel test robot <lkp@intel.com>
Fixes:
7554886daa31ea ("drm/amdgpu: Fix size validation for non-exclusive domains (v4)")
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 9 Jan 2023 07:54:42 +0000 (08:54 +0100)]
tools/nolibc: fix the O_* fcntl/open macro definitions for riscv
[ Upstream commit
00b18da4089330196906b9fe075c581c17eb726c ]
When RISCV port was imported in 5.2, the O_* macros were taken with
their octal value and written as-is in hex, resulting in the getdents64()
to fail in nolibc-test.
Fixes:
582e84f7b779 ("tool headers nolibc: add RISCV support") #5.2
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 9 Jan 2023 07:54:39 +0000 (08:54 +0100)]
tools/nolibc: restore mips branch ordering in the _start block
[ Upstream commit
184177c3d6e023da934761e198c281344d7dd65b ]
Depending on the compiler used and the optimization options, the sbrk()
test was crashing, both on real hardware (mips-24kc) and in qemu. One
such example is kernel.org toolchain in version 11.3 optimizing at -Os.
Inspecting the sys_brk() call shows the following code:
0040047c <sys_brk>:
40047c:
24020fcd li v0,4045
400480:
27bdffe0 addiu sp,sp,-32
400484:
0000000c syscall
400488:
27bd0020 addiu sp,sp,32
40048c:
10e00001 beqz a3,400494 <sys_brk+0x18>
400490:
00021023 negu v0,v0
400494:
03e00008 jr ra
It is obviously wrong, the "negu" instruction is placed in beqz's
delayed slot, and worse, there's no nop nor instruction after the
return, so the next function's first instruction (addiu sip,sip,-32)
will also be executed as part of the delayed slot that follows the
return.
This is caused by the ".set noreorder" directive in the _start block,
that applies to the whole program. The compiler emits code without the
delayed slots and relies on the compiler to swap instructions when this
option is not set. Removing the option would require to change the
startup code in a way that wouldn't make it look like the resulting
code, which would not be easy to debug. Instead let's just save the
default ordering before changing it, and restore it at the end of the
_start block. Now the code is correct:
0040047c <sys_brk>:
40047c:
24020fcd li v0,4045
400480:
27bdffe0 addiu sp,sp,-32
400484:
0000000c syscall
400488:
10e00002 beqz a3,400494 <sys_brk+0x18>
40048c:
27bd0020 addiu sp,sp,32
400490:
00021023 negu v0,v0
400494:
03e00008 jr ra
400498:
00000000 nop
Fixes:
66b6f755ad45 ("rcutorture: Import a copy of nolibc") #5.0
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stephan Gerhold [Sat, 31 Dec 2022 11:55:06 +0000 (12:55 +0100)]
ASoC: qcom: Fix building APQ8016 machine driver without SOUNDWIRE
[ Upstream commit
0cbf1ecd8c4801ec7566231491f7ad9cec31098b ]
Older Qualcomm platforms like APQ8016 do not have hardware support for
SoundWire, so kernel configurations made specifically for those platforms
will usually not have CONFIG_SOUNDWIRE enabled.
Unfortunately commit
8d89cf6ff229 ("ASoC: qcom: cleanup and fix
dependency of QCOM_COMMON") breaks those kernel configurations, because
SOUNDWIRE is now a required dependency for SND_SOC_QCOM_COMMON (and in
turn also SND_SOC_APQ8016_SBC). Trying to migrate such a kernel config
silently disables SND_SOC_APQ8016_SBC and breaks audio functionality.
The soundwire helpers in common.c are only used by two of the Qualcomm
audio machine drivers, so building and requiring CONFIG_SOUNDWIRE for
all platforms is unnecessary.
There is no need to stuff all common code into a single module. Fix the
issue by moving the soundwire helpers to a separate SND_SOC_QCOM_SDW
module/option that is selected only by the machine drivers that make
use of them. This also allows reverting the imply/depends changes from
the previous fix because both SM8250 and SC8280XP already depend on
SOUNDWIRE, so the soundwire helpers will be only built if SOUNDWIRE
is really enabled.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes:
8d89cf6ff229 ("ASoC: qcom: cleanup and fix dependency of QCOM_COMMON")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231115506.82991-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mirsad Goran Todorovac [Sat, 7 Jan 2023 03:40:20 +0000 (04:40 +0100)]
af_unix: selftest: Fix the size of the parameter to connect()
[ Upstream commit
7d6ceeb1875cc08dc3d1e558e191434d94840cd5 ]
Adjust size parameter in connect() to match the type of the parameter, to
fix "No such file or directory" error in selftests/net/af_unix/
test_oob_unix.c:127.
The existing code happens to work provided that the autogenerated pathname
is shorter than sizeof (struct sockaddr), which is why it hasn't been
noticed earlier.
Visible from the trace excerpt:
bind(3, {sa_family=AF_UNIX, sun_path="unix_oob_453059"}, 110) = 0
clone(child_stack=NULL, flags=CLONE_CHILD_CLEARTID|CLONE_CHILD_SETTID|SIGCHLD, child_tidptr=0x7fa6a6577a10) = 453060
[pid <child>] connect(6, {sa_family=AF_UNIX, sun_path="unix_oob_45305"}, 16) = -1 ENOENT (No such file or directory)
BUG: The filename is trimmed to sizeof (struct sockaddr).
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Kuniyuki Iwashima <kuniyu@amazon.co.jp>
Cc: Florian Westphal <fw@strlen.de>
Reviewed-by: Florian Westphal <fw@strlen.de>
Fixes:
314001f0bf92 ("af_unix: Add OOB support")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Fri, 6 Jan 2023 14:25:23 +0000 (14:25 +0000)]
gro: take care of DODGY packets
[ Upstream commit
7871f54e3deed68a27111dda162c4fe9b9c65f8f ]
Jaroslav reported a recent throughput regression with virtio_net
caused by blamed commit.
It is unclear if DODGY GSO packets coming from user space
can be accepted by GRO engine in the future with minimal
changes, and if there is any expected gain from it.
In the meantime, make sure to detect and flush DODGY packets.
Fixes:
5eddb24901ee ("gro: add support of (hw)gro packets to gro stack")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-and-bisected-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Richard Gobert [Tue, 8 Nov 2022 12:33:28 +0000 (13:33 +0100)]
gro: avoid checking for a failed search
[ Upstream commit
e081ecf084d31809242fb0b9f35484d5fb3a161a ]
After searching for a protocol handler in dev_gro_receive, checking for
failure is redundant. Skip the failure code after finding the
corresponding handler.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Richard Gobert <richardbgobert@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20221108123320.GA59373@debian
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of:
7871f54e3dee ("gro: take care of DODGY packets")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Minsuk Kang [Fri, 6 Jan 2023 08:23:44 +0000 (17:23 +0900)]
nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()
[ Upstream commit
9dab880d675b9d0dd56c6428e4e8352a3339371d ]
Fix a use-after-free that occurs in hcd when in_urb sent from
pn533_usb_send_frame() is completed earlier than out_urb. Its callback
frees the skb data in pn533_send_async_complete() that is used as a
transfer buffer of out_urb. Wait before sending in_urb until the
callback of out_urb is called. To modify the callback of out_urb alone,
separate the complete function of out_urb and ack_urb.
Found by a modified version of syzkaller.
BUG: KASAN: use-after-free in dummy_timer
Call Trace:
memcpy (mm/kasan/shadow.c:65)
dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352)
transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453)
dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972)
arch_static_branch (arch/x86/include/asm/jump_label.h:27)
static_key_false (include/linux/jump_label.h:207)
timer_expire_exit (include/trace/events/timer.h:127)
call_timer_fn (kernel/time/timer.c:1475)
expire_timers (kernel/time/timer.c:1519)
__run_timers (kernel/time/timer.c:1790)
run_timer_softirq (kernel/time/timer.c:1803)
Fixes:
c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver")
Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Roger Pau Monne [Wed, 30 Nov 2022 16:36:02 +0000 (17:36 +0100)]
hvc/xen: lock console list traversal
[ Upstream commit
c0dccad87cf68fc6012aec7567e354353097ec1a ]
The currently lockless access to the xen console list in
vtermno_to_xencons() is incorrect, as additions and removals from the
list can happen anytime, and as such the traversal of the list to get
the private console data for a given termno needs to happen with the
lock held. Note users that modify the list already do so with the
lock taken.
Adjust current lock takers to use the _irq{save,restore} helpers,
since the context in which vtermno_to_xencons() is called can have
interrupts disabled. Use the _irq{save,restore} set of helpers to
switch the current callers to disable interrupts in the locked region.
I haven't checked if existing users could instead use the _irq
variant, as I think it's safer to use _irq{save,restore} upfront.
While there switch from using list_for_each_entry_safe to
list_for_each_entry: the current entry cursor won't be removed as
part of the code in the loop body, so using the _safe variant is
pointless.
Fixes:
02e19f9c7cac ('hvc_xen: implement multiconsole support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yair Podemsky [Wed, 30 Nov 2022 12:51:21 +0000 (14:51 +0200)]
sched/core: Fix arch_scale_freq_tick() on tickless systems
[ Upstream commit
7fb3ff22ad8772bbf0e3ce1ef3eb7b09f431807f ]
In order for the scheduler to be frequency invariant we measure the
ratio between the maximum CPU frequency and the actual CPU frequency.
During long tickless periods of time the calculations that keep track
of that might overflow, in the function scale_freq_tick():
if (check_shl_overflow(acnt, 2*SCHED_CAPACITY_SHIFT, &acnt))
goto error;
eventually forcing the kernel to disable the feature for all CPUs,
and show the warning message:
"Scheduler frequency invariance went wobbly, disabling!".
Let's avoid that by limiting the frequency invariant calculations
to CPUs with regular tick.
Fixes:
e2b0d619b400 ("x86, sched: check for counters overflow in frequency invariant accounting")
Suggested-by: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Yair Podemsky <ypodemsk@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Acked-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Link: https://lore.kernel.org/r/20221130125121.34407-1-ypodemsk@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Angela Czubak [Thu, 5 Jan 2023 16:01:07 +0000 (21:31 +0530)]
octeontx2-af: Fix LMAC config in cgx_lmac_rx_tx_enable
[ Upstream commit
b4e9b8763e417db31c7088103cc557d55cb7a8f5 ]
PF netdev can request AF to enable or disable reception and transmission
on assigned CGX::LMAC. The current code instead of disabling or enabling
'reception and transmission' also disables/enable the LMAC. This patch
fixes this issue.
Fixes:
1435f66a28b4 ("octeontx2-af: CGX Rx/Tx enable/disable mbox handlers")
Signed-off-by: Angela Czubak <aczubak@marvell.com>
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20230105160107.17638-1-hkelam@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Layton [Thu, 5 Jan 2023 19:55:56 +0000 (14:55 -0500)]
nfsd: fix handling of cached open files in nfsd4_open codepath
[ Upstream commit
0b3a551fa58b4da941efeb209b3770868e2eddd7 ]
Commit
fb70bf124b05 ("NFSD: Instantiate a struct file when creating a
regular NFSv4 file") added the ability to cache an open fd over a
compound. There are a couple of problems with the way this currently
works:
It's racy, as a newly-created nfsd_file can end up with its PENDING bit
cleared while the nf is hashed, and the nf_file pointer is still zeroed
out. Other tasks can find it in this state and they expect to see a
valid nf_file, and can oops if nf_file is NULL.
Also, there is no guarantee that we'll end up creating a new nfsd_file
if one is already in the hash. If an extant entry is in the hash with a
valid nf_file, nfs4_get_vfs_file will clobber its nf_file pointer with
the value of op_file and the old nf_file will leak.
Fix both issues by making a new nfsd_file_acquirei_opened variant that
takes an optional file pointer. If one is present when this is called,
we'll take a new reference to it instead of trying to open the file. If
the nfsd_file already has a valid nf_file, we'll just ignore the
optional file and pass the nfsd_file back as-is.
Also rework the tracepoints a bit to allow for an "opened" variant and
don't try to avoid counting acquisitions in the case where we already
have a cached open file.
Fixes:
fb70bf124b05 ("NFSD: Instantiate a struct file when creating a regular NFSv4 file")
Cc: Trond Myklebust <trondmy@hammerspace.com>
Reported-by: Stanislav Saner <ssaner@redhat.com>
Reported-and-Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-and-Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jeff Layton [Sun, 11 Dec 2022 11:19:33 +0000 (06:19 -0500)]
nfsd: rework refcounting in filecache
[ Upstream commit
ac3a2585f018f10039b4a856dcb122da88c1c1c9 ]
The filecache refcounting is a bit non-standard for something searchable
by RCU, in that we maintain a sentinel reference while it's hashed. This
in turn requires that we have to do things differently in the "put"
depending on whether its hashed, which we believe to have led to races.
There are other problems in here too. nfsd_file_close_inode_sync can end
up freeing an nfsd_file while there are still outstanding references to
it, and there are a number of subtle ToC/ToU races.
Rework the code so that the refcount is what drives the lifecycle. When
the refcount goes to zero, then unhash and rcu free the object. A task
searching for a nfsd_file is allowed to bump its refcount, but only if
it's not already 0. Ensure that we don't make any other changes to it
until a reference is held.
With this change, the LRU carries a reference. Take special care to deal
with it when removing an entry from the list, and ensure that we only
repurpose the nf_lru list_head when the refcount is 0 to ensure
exclusive access to it.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of:
0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuck Lever [Thu, 3 Nov 2022 20:22:48 +0000 (16:22 -0400)]
NFSD: Add an nfsd_file_fsync tracepoint
[ Upstream commit
d7064eaf688cfe454c50db9f59298463d80d403c ]
Add a tracepoint to capture the number of filecache-triggered fsync
calls and which files needed it. Also, record when an fsync triggers
a write verifier reset.
Examples:
<...>-97 [007] 262.505611: nfsd_file_free: inode=0xffff888171e08140 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d2400
<...>-97 [007] 262.505612: nfsd_file_fsync: inode=0xffff888171e08140 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d2400 ret=0
<...>-97 [007] 262.505623: nfsd_file_free: inode=0xffff888171e08dc0 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d1e00
<...>-97 [007] 262.505624: nfsd_file_fsync: inode=0xffff888171e08dc0 ref=0 flags=GC may=WRITE nf_file=0xffff8881373d1e00 ret=0
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Stable-dep-of:
0b3a551fa58b ("nfsd: fix handling of cached open files in nfsd4_open codepath")
Signed-off-by: Sasha Levin <sashal@kernel.org>