Jaegeuk Kim [Wed, 15 May 2013 07:40:02 +0000 (16:40 +0900)]
f2fs: fix BUG_ON during f2fs_evict_inode(dir)
During the dentry recovery routine, recover_inode() triggers __f2fs_add_link
with its directory inode.
In the following scenario, a bug is captured.
1. dir = f2fs_iget(pino)
2. __f2fs_add_link(dir, name)
3. iput(dir)
-> f2fs_evict_inode() faces with BUG_ON(atomic_read(fi->dirty_dents))
Kernel BUG at
ffffffffa01c0676 [verbose debug info unavailable]
[<
ffffffffa01c0676>] f2fs_evict_inode+0x276/0x300 [f2fs]
Call Trace:
[<
ffffffff8118ea00>] evict+0xb0/0x1b0
[<
ffffffff8118f1c5>] iput+0x105/0x190
[<
ffffffffa01d2dac>] recover_fsync_data+0x3bc/0x1070 [f2fs]
[<
ffffffff81692e8a>] ? io_schedule+0xaa/0xd0
[<
ffffffff81690acb>] ? __wait_on_bit_lock+0x7b/0xc0
[<
ffffffff8111a0e7>] ? __lock_page+0x67/0x70
[<
ffffffff81165e21>] ? kmem_cache_alloc+0x31/0x140
[<
ffffffff8118a502>] ? __d_instantiate+0x92/0xf0
[<
ffffffff812a949b>] ? security_d_instantiate+0x1b/0x30
[<
ffffffff8118a5b4>] ? d_instantiate+0x54/0x70
This means that we should flush all the dentry pages between iget and iput().
But, during the recovery routine, it is unallowed due to consistency, so we
have to wait the whole recovery process.
And then, write_checkpoint flushes all the dirty dentry blocks, and nicely we
can put the stale dir inodes from the dirty_dir_inode_list.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Wed, 15 May 2013 07:12:18 +0000 (16:12 +0900)]
f2fs: fix por_doing variable coverage
The reason of using sbi->por_doing is to alleviate data writes during the
recovery.
The find_fsync_dnodes() produces some dirty dentry pages, so we should
cover it too with sbi->por_doing.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Wed, 15 May 2013 01:49:13 +0000 (10:49 +0900)]
f2fs: remove redundant assignment
We don't need to assign a value redundantly.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Sun, 12 May 2013 23:38:35 +0000 (08:38 +0900)]
f2fs: fix the inconsistent state of data pages
In get_lock_data_page, if there is a data race between get_dnode_of_data for
node and grab_cache_page for data, f2fs is able to face with the following
BUG_ON(dn.data_blkaddr == NEW_ADDR).
kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/data.c:251!
[<
ffffffffa044966c>] get_lock_data_page+0x1ec/0x210 [f2fs]
Call Trace:
[<
ffffffffa043b089>] f2fs_readdir+0x89/0x210 [f2fs]
[<
ffffffff811a0920>] ? fillonedir+0x100/0x100
[<
ffffffff811a0920>] ? fillonedir+0x100/0x100
[<
ffffffff811a07f8>] vfs_readdir+0xb8/0xe0
[<
ffffffff811a0b4f>] sys_getdents+0x8f/0x110
[<
ffffffff816d7999>] system_call_fastpath+0x16/0x1b
This bug is able to be occurred when the block address of the data block is
changed after f2fs_put_dnode().
In order to avoid that, this patch fixes the lock order of node and data
blocks in which the node block lock is covered by the data block lock.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Jaegeuk Kim [Tue, 14 May 2013 06:47:43 +0000 (15:47 +0900)]
f2fs: fix inconsistency of block count during recovery
Currently f2fs recovers the dentry of fsynced files.
When power-off-recovery is conducted, this newly recovered inode should increase
node block count as well as inode block count.
This patch resolves this inconsistency that results in:
1. create a file
2. write data
3. fsync
4. reboot without sync
5. mount and recover the file
6. node block count is 1 and inode block count is 2
: fall into the inconsistent state
7. unlink the file
: trigger the following BUG_ON
------------[ cut here ]------------
kernel BUG at /home/zeus/f2fs_test/src/fs/f2fs/f2fs.h:716!
Call Trace:
[<
ffffffffa0344100>] ? get_node_page+0x50/0x1a0 [f2fs]
[<
ffffffffa0344bfc>] remove_inode_page+0x8c/0x100 [f2fs]
[<
ffffffffa03380f0>] ? f2fs_evict_inode+0x180/0x2d0 [f2fs]
[<
ffffffffa033812e>] f2fs_evict_inode+0x1be/0x2d0 [f2fs]
[<
ffffffff811c7a67>] evict+0xa7/0x1a0
[<
ffffffff811c82b5>] iput+0x105/0x190
[<
ffffffff811c2b30>] d_kill+0xe0/0x120
[<
ffffffff811c2c57>] dput+0xe7/0x1e0
[<
ffffffff811acc3d>] __fput+0x19d/0x2d0
[<
ffffffff811acd7e>] ____fput+0xe/0x10
[<
ffffffff81070645>] task_work_run+0xb5/0xe0
[<
ffffffff81002941>] do_notify_resume+0x71/0xb0
[<
ffffffff8175f14a>] int_signal+0x12/0x17
Reported-and-Tested-by: Chris Fries <C.Fries@motorola.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
Beomho Seo [Fri, 26 Jul 2013 08:01:52 +0000 (17:01 +0900)]
ARM: dts:exynos4412-m0: update gpio-keys configuration
add gpio-keys configuration for support M0 board
supported gpio-keys are volume up, volume down, power and ok key
Signed-off-by: Beomho Seo <beomho.seo@samsung.com>
Jaehoon Chung [Thu, 25 Jul 2013 11:12:08 +0000 (20:12 +0900)]
mmc: Makefile: change the init sequence for indexing mmcblkX
To ensure mmcblk0 for eMMC, must call the dwmmc before calling sdhci.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 25 Jul 2013 04:45:27 +0000 (13:45 +0900)]
ARM: tizen_defconfig: enable unsafe resume config
Enabled the unsafe rsume configuration
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jonghwa Lee [Mon, 17 Jun 2013 08:21:21 +0000 (17:21 +0900)]
ARM: dts: exynos4412-redwood: Add i2c node for MAX77693
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Jonghwa Lee [Tue, 18 Jun 2013 06:01:37 +0000 (15:01 +0900)]
extcon: max77693: Fix bug related to MAX77693 irq when set ADC debounce time
Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Inki Dae [Wed, 24 Jul 2013 06:28:57 +0000 (15:28 +0900)]
drm/exynos: add runtime pm interfaces to g2d driver
This patch makes g2d power domain and clock to be controlled
with runtime pm interfaces instead of controlling them
respectively.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Jaehoon Chung [Wed, 24 Jul 2013 05:47:31 +0000 (14:47 +0900)]
ARM: tizen_defconfig: enable the exynos dw-mmc
For using dw_mmc-exynos, updated the tizen_defconfig
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 24 Jul 2013 05:11:08 +0000 (14:11 +0900)]
clock: clk-exynos4: set the CLK_SET_RATE_PARENT for mmc4
mmc4_clk set to CLK_SET_PARENT with DIV_F().
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 3 Jul 2013 06:19:29 +0000 (15:19 +0900)]
ARM: dts: updated the dwmmc device tree for clk name
To get clk for dwmmc, added the clk-name.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 24 Jul 2013 05:45:33 +0000 (14:45 +0900)]
ARM: dts: enable dw-mmc controlle instead of sdhci controller
Using dw-mmc controller.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Doug Anderson [Fri, 7 Jun 2013 17:28:30 +0000 (10:28 -0700)]
mmc: dw_mmc: Add the ability to set the ciu clock frequency
As of now we rely on code outside of the driver to set the ciu clock
frequency. There's no reason to do that. Add support for setting up
the clock in the driver during probe.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Doug Anderson [Fri, 7 Jun 2013 17:28:29 +0000 (10:28 -0700)]
mmc: dw_mmc: Handle late vmmc regulators with EPROBE_DEFER
It is possible to specify a regulator that should be turned on when
dw_mmc is probed. At the moment dw_mmc will fail to use the regulator
properly if the regulator probes after dw_mmc. Fix this problem by
honoring EPROBE_DEFER.
At the same time move the regulator code out of the slot init code.
We only specify one regulator for the whole device and other parts of
the code (like suspend/resume) assume that the regulator has only been
enabled once.
Signed-off-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Jaehoon Chung [Mon, 27 May 2013 04:47:57 +0000 (13:47 +0900)]
mmc: dw_mmc: change the macro name from DTO to DRTO
At Interrupt status register, Bit9 is Data Read Timeout.
But we used macro name as the DTO. It could be confused with the
Data Transfer Over(DTO)-Bit[3].
It's clearly that is changed the DRTO instead of DTO.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Joonyoung Shim [Fri, 26 Apr 2013 06:35:22 +0000 (15:35 +0900)]
mmc: dw_mmc: clear IDSTS register when initialize IDMAC
If pending interrupt for IDMAC exists when initialize IDMAC, it will
call interrupt handler unnecessarily.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Wei Yongjun [Fri, 19 Apr 2013 01:25:45 +0000 (09:25 +0800)]
mmc: dw_mmc: fix error return code in dw_mci_probe()
Fix to return -ENOMEM in alloc workqueue error case instead
of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Seungwon Jeon <tgih.jun@samsung.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Inki Dae [Wed, 24 Jul 2013 04:41:34 +0000 (13:41 +0900)]
ARM: dts: exynos4412-slp_pq: add device node for g2d iommu
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Wed, 24 Jul 2013 04:40:12 +0000 (13:40 +0900)]
drm/exynos: consider common clock framework to g2d driver.
This patch just changes clk_enable/disable to
clk_prepare_enable/clk_disable_unprepare.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 23 Jul 2013 09:00:16 +0000 (18:00 +0900)]
ARM: configs: update tizen_defconfig
Enabling exynos drm iommu support and disabling DRM based
IPP drivers. IPP drivers don't support IOMMU yet.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Tue, 23 Jul 2013 08:26:35 +0000 (17:26 +0900)]
ARM: dts: exynos4412-slp_pq: add fimd iommu related properties
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 22 Jul 2013 10:57:05 +0000 (19:57 +0900)]
drm/exynos: fix module build error
Exynos drm drivers don't need to export device tables because
all devices of Exynos drm include in one SoC so they cannot be
plugged in.
P.S. we need to create MODULE_DEVICE_TABLE in case of enabling
the linux-hotplug system to load the driver automatically when
the device is plugged in.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 22 Jul 2013 03:52:01 +0000 (12:52 +0900)]
dmabuf-sync: add private backend callbacks
This ops has just a free callback to release resource for each
device driver. free callback will be called when device driver's
sync object is freed. So device drivers should implement this callback
so that their own contexts can be cleaned up regarding sync object.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 22 Jul 2013 03:47:39 +0000 (12:47 +0900)]
dmabuf-sync: remove unnecessary the use of mutex lock.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Mon, 22 Jul 2013 03:42:35 +0000 (12:42 +0900)]
dmabuf-sync: fix sync lock to multiple read
This patch fixes the issue that a sync object is unlocked
when shared_cnt is bigger than 1 and sobj->access_type is write.
the below number means shared_cnt and three sync objects share
one buffer,
r r r w
when write locked 1 2 3 3 <- blocked
when read unlocked 2
when read unlocked 1
when read unlocked 1 <- waked up
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Seung-Woo Kim [Fri, 19 Jul 2013 07:52:29 +0000 (16:52 +0900)]
cpufreq: exynos: fix section mismatch
Non init data, exynos_cpufreq_driver references init data,
exynos_cpufreq_probe and exynos_cpufreq_of_match, and this causes
section mismatch.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 19 Jul 2013 07:45:57 +0000 (16:45 +0900)]
max77693_charger: fix section mismatch
max77693_charger_of_match with __initconst flag is referenced from
max77693_charger_driver which is non init data and this causes
section mismatch. So flag __initconst is removed.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 19 Jul 2013 07:41:44 +0000 (16:41 +0900)]
clk: samsung: fix section mismatch from audio subsystem clocks
The init function should have __init flag to match reference
sections.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Chanho Park [Fri, 19 Jul 2013 07:18:56 +0000 (16:18 +0900)]
dts: arm: add arm-pmu node for exynos4412
This patch enables arm-pmu node of exynos4412. It has 4 cpus. Thus, it also
has 4 performance counter.
Signed-off-by: Chanho Park <chanho61.park@samsung.com>
Jiri Olsa [Mon, 15 Apr 2013 03:54:14 +0000 (05:54 +0200)]
perf tools: Add missing liblk.a dependency for python/perf.so
Adding missing liblk.a dependency for python/perf.so.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-26-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 15 Apr 2013 02:49:43 +0000 (04:49 +0200)]
perf tools: Remove '?=' Makefile STRIP assignment
No need to use '?=' assignment for STRIP variable, the standard
'=' does the same job without creating confusion.
Suggested-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Link: http://lkml.kernel.org/r/1369398928-9809-25-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 15 Apr 2013 02:32:28 +0000 (04:32 +0200)]
perf tools: Replace multiple line assignment with multiple statements
Replacing multiple line assignment with multiple statements.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-24-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 15 Apr 2013 02:06:58 +0000 (04:06 +0200)]
perf tools: Replace tabs with spaces for all non-commands statements
Replacing tabs with spaces for all non-commands statements
in 'Makefile' and 'config/Makefile' files.
Suggested-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-23-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 12:35:24 +0000 (14:35 +0200)]
perf tools: Add NO_BIONIC variable to confiure bionic setup
Adding NO_BIONIC variable to confiure bionic setup
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-22-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 12:35:23 +0000 (14:35 +0200)]
perf tools: Switch to full path C include directories
Switching to full path C include directories, to make the includes
clear. Plus little include cleanup.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-21-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 21 Mar 2013 10:41:05 +0000 (11:41 +0100)]
perf tools: Merge all *LDFLAGS* make variable into LDFLAGS
Merging all *LDFLAGS* make variable into LDFLAGS to eliminate all
special *LDFLAGS* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-20-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 21 Mar 2013 10:30:54 +0000 (11:30 +0100)]
perf tools: Merge all *CFLAGS* make variable into CFLAGS
Merging all *CFLAGS* make variable into CFLAGS to eliminate all special
*_CFLAGS_* variables and make the setup clear.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-19-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sat, 25 May 2013 23:50:39 +0000 (17:50 -0600)]
perf evlist: Reset SIGTERM handler in workload child process
Jiri reported hanging perf tests on latest acme's perf/core and bisected
it to
87f303a9f:
[jolsa@krava2 perf]$ cat /proc/sys/kernel/perf_event_paranoid
1
[jolsa@krava2 perf]$ ./perf record -C 0 kill
Error:
You may not have permission to collect %sstats.
Consider tweaking /proc/sys/kernel/perf_event_paranoid:
-1 - Not paranoid at all
0 - Disallow raw tracepoint access for unpriv
1 - Disallow cpu events for unpriv
2 - Disallow kernel profiling for unpriv
Need to let default handling kickin for workload process.
Reported-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1369525839-1261-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael Ellerman [Fri, 10 May 2013 15:33:00 +0000 (17:33 +0200)]
perf: Expand definition of sysfs format attribute
Make it explicit that the format attributes may define overlapping bit
ranges. Unfortunately this was left unspecified originally, and all the
examples show non-overlapping ranges. I don't believe this is an ABI
change, as we are defining something that was previously undefined, but
others may disagree.
The POWER8 PMU would like to define overlapping ranges, as bit ranges in
the event code have different meanings for certain events. It will also
allow us to define an overarching "event" field, that encompasses all
others.
As far as I can see perf is comfortable with this change, however I am
not sure if there are any other users of the interface.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368199980-20283-1-git-send-email-jolsa@redhat.com
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Sat, 6 Apr 2013 16:52:05 +0000 (09:52 -0700)]
perf: Power7 Update testing ABI to list CPI-stack events
Following patch added several Power7 events into /sys/devices/cpu/events.
Document those events in the testing ABI.
https://lists.ozlabs.org/pipermail/linuxppc-dev/2013-April/105167.html
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130406170623.GA900@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Sat, 6 Apr 2013 15:48:26 +0000 (08:48 -0700)]
perf: Power7: Make CPI stack events available in sysfs
A set of Power7 events are often used for Cycles Per Instruction (CPI) stack
analysis. Make these events available in sysfs (/sys/devices/cpu/events/) so
they can be identified using their symbolic names:
perf stat -e 'cpu/PM_CMPLU_STALL_DCACHE_MISS/' /bin/ls
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Link: http://lkml.kernel.org/r/20130406164803.GA408@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rabin Vincent [Fri, 17 May 2013 20:27:44 +0000 (22:27 +0200)]
tools lib lk: Respect CROSS_COMPILE
Make lk use CROSS_COMPILE, in order to be able to cross compile perf
again.
Signed-off-by: Rabin Vincent <rabin@rab.in>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Link: http://lkml.kernel.org/r/1368822464-4887-1-git-send-email-rabin@rab.in
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 11:16:41 +0000 (13:16 +0200)]
perf tools: Remove cwdlen from struct perf_session
Removing cwdlen from struct perf_session as it's no longer used.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369394201-20044-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 11:16:39 +0000 (13:16 +0200)]
perf tools: Remove frozen from perf_header struct
Removing frozen from perf_header struct as it's no longer used.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369394201-20044-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 11:16:38 +0000 (13:16 +0200)]
perf tests: Fix exclude_guest|exclude_host checking for attr tests
We have a one of the event open fallback case in __perf_evsel__open
where we zero exclude_guest|exclude_host fields.
This means there's no way for attr tests to find out what's the right
value for those fields, so we need to check for both 0 and 1. Luckily we
still have other event parsing tests for those fields.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369394201-20044-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 24 May 2013 11:16:37 +0000 (13:16 +0200)]
perf tests: Fix attr test for record -d option
The sample type for '-d' option is changed, because of the memory
profiling patches from Stephane. The '-d' now adds PERF_SAMPLE_DATA_SRC
sample_type.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369394201-20044-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Mon, 18 Mar 2013 21:04:35 +0000 (22:04 +0100)]
perf tools: Final touches for CHK config move
Removing no longer needed ifdefs.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-18-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:56:01 +0000 (00:56 +0100)]
perf tools: Move paths config into config/Makefile
Moving paths config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-17-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:45:27 +0000 (00:45 +0100)]
perf tools: Move libnuma check config into config/Makefile
Moving libnuma check config into config/Makefile
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-16-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:41:04 +0000 (00:41 +0100)]
perf tools: Move stdlib check config into config/Makefile
Moving stdlib check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-15-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:38:16 +0000 (00:38 +0100)]
perf tools: Move libbfd check config into config/Makefile
Moving libbfd check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-14-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:35:32 +0000 (00:35 +0100)]
perf tools: Move libpython check config into config/Makefile
Moving libpython check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-13-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:19:44 +0000 (00:19 +0100)]
perf tools: Move libperl check config into config/Makefile
Moving libperl check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-12-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 17 Mar 2013 23:09:24 +0000 (00:09 +0100)]
perf tools: Move gtk2 check config into config/Makefile
Moving gtk2 check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-11-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:56:08 +0000 (00:56 +0100)]
perf tools: Move slang check config into config/Makefile
Moving slang check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-10-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:54:36 +0000 (00:54 +0100)]
perf tools: Move libaudit check config into config/Makefile
Moving libaudit check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-9-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:53:03 +0000 (00:53 +0100)]
perf tools: Move libunwind check config into config/Makefile
Moving libunwind check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-8-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:48:14 +0000 (00:48 +0100)]
perf tools: Move libdw check config into config/Makefile
Moving libdw check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-7-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:45:08 +0000 (00:45 +0100)]
perf tools: Move libelf check config into config/Makefile
Moving libelf check config into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-6-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:40:48 +0000 (00:40 +0100)]
perf tools: Move compiler and linker flags check into config/Makefile
Moving compiler and linker flags check into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-5-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 24 Mar 2013 23:32:01 +0000 (00:32 +0100)]
perf tools: Move programs check into config/Makefile
Moving programs check into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-4-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 15 Mar 2013 15:28:49 +0000 (16:28 +0100)]
perf tools: Move arch check into config/Makefile
Moving arch check into config/Makefile.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Fri, 29 Mar 2013 15:11:02 +0000 (16:11 +0100)]
perf tools: Add automated make test suite
Adding automated test for testing the build process.
To run it you need to be in perf directory or specify one with PERF
variable. It's also possible to specify optional Makefile to test via MK
variable.
Whole suite is executed twice, the second time with O=/tmp/xxx option
added.
To run the whole suite:
$ make -f tests/make
- make_pure: cd . && make -f Makefile
test: test -x ./perf
- make_clean_all: cd . && make -f Makefile clean all
test: test -x ./perf
- make_python_perf_so: cd . && make -f Makefile python/perf.so
test: test -f ./python/perf.so
- make_debug: cd . && make -f Makefile DEBUG=1
test: test -x ./perf
- make_no_libperl: cd . && make -f Makefile NO_LIBPERL=1
test: test -x ./perf
You see command line for 'make_pure' test right away, and the output is
stored into 'make_pure' file.
To run simple test:
$ make -f tests/make make_debug
- make_debug: cd . && make -f Makefile DEBUG=1
test: test -x ./perf
At this moment tests checks for successfull build and for existence of
several built files. Additional after-build checks could be added.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369398928-9809-2-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sun, 26 May 2013 04:47:10 +0000 (22:47 -0600)]
perf tools: Save parent pid in thread struct
Information is available, so why not save it in case some command wants
to use it.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1369543631-5106-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sun, 26 May 2013 00:24:48 +0000 (18:24 -0600)]
perf stats: Fix divide by 0 in variance
Number of samples needs to be greater 1 to have a variance.
Fixes nan% in perf-kvm-live output.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1369527896-3650-9-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Sun, 26 May 2013 00:24:46 +0000 (18:24 -0600)]
perf kvm: Handle realloc failures
Save previous pointer and free on failure.
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Cc: Xiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1369527896-3650-7-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 23 May 2013 10:08:38 +0000 (12:08 +0200)]
perf test: Fix typo
Its 'multiple', not 'mutliple', noticed while preparing a talk for
Linuxtag'13.
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dzy9nl1ku7a5umddvdic4ibl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 13 Dec 2012 13:09:00 +0000 (14:09 +0100)]
perf hists: Rename hist_entry__add_pair arguments
The current logic is to attach pair to the leader hist_entry.
Arguments of hist_entry__add_pair function were placed the other way
round.. driving me crazy.
I.e. list_add_tail expects (new_node, head).
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1355404152-16523-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Thu, 13 Dec 2012 13:08:59 +0000 (14:08 +0100)]
perf diff: Use internal rb tree for hists__precompute
There's missing change for hists__precompute to iterate either
entries_collapsed or entries_in tree. The change was initiated
for hists_compute_resort function in commit:
66f97ed perf diff: Use internal rb tree for compute resort
but was missing for hists__precompute function changes.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1355404152-16523-2-git-send-email-jolsa@redhat.com
[ committer note: Reduce patch size, no functional change ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:06 +0000 (11:09 +0900)]
perf report: Add report.percent-limit config variable
Now an user can set a default value of --percent-limit option into the
perfconfig file.
$ cat ~/.perfconfig
[report]
percent-limit = 0.1
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:05 +0000 (11:09 +0900)]
perf top: Add --percent-limit option
The --percent-limit option is for not showing small overhead entries in
the output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:04 +0000 (11:09 +0900)]
perf report: Add --percent-limit option
The --percent-limit option is for not showing small overhead entries in
the output. Maybe we want to set a certain default value like 0.1.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:03 +0000 (11:09 +0900)]
perf report: Don't bother locking when adding hist entries
The 'perf report'command is single-threaded, so no need to grab a lock.
Although the fast path of pthread_mutex_[un]lock() is very fast, there's
a ~3% gain by eliminating it when we have huge sample data.
$ perf record -a -F 100000 -o perf.data.bench -- perf bench sched all
$ perf record -e cycles:upp -o perf.data.before -- \
> perf report -i perf.data.bench --stdio > /dev/null
... apply this patch ...
$ perf record -e cycles:upp -o perf.data.after -- \
> perf report -i perf.data.bench --stdio > /dev/null
$ perf diff perf.data.{before,after} | grep pthread
+0.02% libpthread-2.15.so [.] _pthread_cleanup_push_defer
+0.02% libpthread-2.15.so [.] _pthread_cleanup_pop_restore
0.05% -0.05% perf [.] pthread_mutex_unlock@plt
0.05% -0.05% perf [.] pthread_mutex_lock@plt
1.01% -1.01% libpthread-2.15.so [.] pthread_mutex_lock
1.68% -1.68% libpthread-2.15.so [.] __pthread_mutex_unlock_usercnt
0.05% -0.05% libpthread-2.15.so [.] pthread_mutex_unlock
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-6-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:02 +0000 (11:09 +0900)]
perf hists: Move locking to its call-sites
It's a preparation patch to eliminate unneeded locking in the perf
report path.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:01 +0000 (11:09 +0900)]
perf top: Get rid of *_threaded() functions
Those _threaded() functions are needed to make hist tree handling
thread-safe, but AFAICS the only thing it does is forcing it to use
the intermediate 'collapsed' tree.
This can be acheived by setting sort__need_collapse to 1 in cmd_top() so
no need to keep those _threaded() variants.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:09:00 +0000 (11:09 +0900)]
perf top: Fix percent output when no samples collected
If there's no sample, kernel and exact percent output at the header
looked like "-nan%".
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 14 May 2013 02:08:59 +0000 (11:08 +0900)]
perf top: Fix -E option behavior
The -E/--entries option controls how many lines to be printed on stdio
output but it doesn't work as it should be:
If -E option is specified, print that many lines regardless of current
window size, if not automatically adjust number of lines printed to fit
into the window size.
Reported-by: Minchan Kim <minchan@kernel.org>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1368497347-9628-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Mon, 6 May 2013 18:24:23 +0000 (12:24 -0600)]
perf record: handle death by SIGTERM
Perf data files cannot be processed until the header is updated which is
done via an on_exit handler.
If perf is killed due to a SIGTERM it does not run the on_exit hooks
leaving the perf.data file in a random state which perf-report will
happily spin on trying to read.
As noted by Mike an easy reproducer is:
perf record -a -g & sleep 1; killall perf
Fix by catching SIGTERM like it does SIGINT.
Also need to remove the kill which was added via commit
f7b7c26e.
Acked-by: Stephane Eranian <eranian@google.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1367864663-1309-1-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Fri, 26 Apr 2013 17:17:56 +0000 (10:17 -0700)]
perf tests: Fix compile errors in bp_signal files
When building on powerpc, we get compile errors in bp_signal.c and
bp_signal_overflow.c due to __u64 and '%llx'.
Powerpc, needs __SANE_USERSPACE_TYPES__ to be defined so we pick up
<asm-generic/int-ll64.h> and define __u64 as unsigned long long.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20130426173320.GA7029@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Wed, 24 Apr 2013 09:37:29 +0000 (11:37 +0200)]
perf tools: Fix tab vs spaces issue in Makefile ifdef/endif
Unmatched spaces/tabs Makefile indentation could make the
Makefile fails. While the tabed line could be considered
sometimes as follow up for rule command, the mixed space
tab meses up with makefile if conditions.
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1366796273-4780-3-git-send-email-jolsa@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Fri, 26 Apr 2013 17:28:46 +0000 (14:28 -0300)]
perf hists browser: Use sort__has_sym
The TUI hist browser had a similar variable has_symbols for the same
purpose. Let's get rid of the duplication.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1365125198-8334-9-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Apr 2013 01:26:37 +0000 (10:26 +0900)]
perf top: Use sort__has_sym
perf top had a similar variable sort_has_symbols for the same purpose.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1365125198-8334-8-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Apr 2013 01:26:36 +0000 (10:26 +0900)]
perf sort: Cleanup sort__has_sym setting
The sort__has_sym variable is set only if a symbol-related sort key was
added. Since branch stack and memory sort dimensions are separated, it
doesn't need to be checked from common dimension.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1365125198-8334-7-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Fri, 5 Apr 2013 01:26:31 +0000 (10:26 +0900)]
perf sort: Reorder HISTC_SRCLINE index
It's in common sort dimension so it'd be more natural to place it with
other common column index.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1365125198-8334-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo [Thu, 4 Apr 2013 15:41:22 +0000 (12:41 -0300)]
perf archive: Fix typo on Documentation
It is analysis, not analisys.
Reported-by: William Cohen <wcohen@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s7476m0irq0naxkzd9iekbr3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 3 Apr 2013 12:26:19 +0000 (21:26 +0900)]
perf sort: Consolidate sort_entry__setup_elide()
The same code was duplicate to places, factor them out to common
sort__setup_elide().
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364991979-3008-11-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 3 Apr 2013 12:26:11 +0000 (21:26 +0900)]
perf sort: Separate out memory-specific sort keys
Since they're used only for perf mem, separate out them to a different
dimension so that normal user cannot access them by any chance.
For global/local weights, I'm not entirely sure to place them into the
memory dimension. But it's the only user at this time.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364991979-3008-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Wed, 3 Apr 2013 12:26:10 +0000 (21:26 +0900)]
perf sort: Factor out common code in sort_dimension__add()
Let's remove duplicate code.
Suggested-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364991979-3008-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 1 Apr 2013 11:35:20 +0000 (20:35 +0900)]
perf sort: Introduce sort__mode variable
It's used for determining current sort mode which can be one of
NORMAL, BRANCH and new MEMORY.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364816125-12212-5-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 1 Apr 2013 11:35:19 +0000 (20:35 +0900)]
perf report: Fix alignment of symbol column when -v is given
When -v option is given, the symbol sort key prints its address also but
it wasn't properly aligned since hists__calc_col_len() misses the
additional part. Also it missed 2 spaces for 0x prefix when printing.
$ perf report --stdio -v -s sym
# Samples: 133 of event 'cycles'
# Event count (approx.):
50536717
#
# Overhead Symbol
# ........ ..............................
#
12.20% 0xffffffff81384c50 v [k] intel_idle
7.62% 0xffffffff8170976a v [k] ftrace_caller
7.02% 0x2d986d B [.] 0x00000000002d986d
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364816125-12212-4-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 1 Apr 2013 11:35:18 +0000 (20:35 +0900)]
perf hists: Free unused mem info of a matched hist entry
The mem info is shared between matched entries so one should be freed.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364816125-12212-3-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Mon, 1 Apr 2013 11:35:17 +0000 (20:35 +0900)]
perf hists: Fix an invalid memory free on he->branch_info
The branch info was allocated for the whole stack and passed matching
hist entry for each level during processing samples. Thus when a hist
entry tries to free its branch info like in hists__collapse_insert_entry
it'll face following error.
*** glibc detected *** perf: munmap_chunk(): invalid pointer: 0x00000000014e9d20 ***
======= Backtrace: =========
/lib64/libc.so.6[0x387d47ae16]
perf[0x4923bd]
perf(cmd_report+0xd68)[0x432a08]
perf[0x41a663]
perf(main+0x58f)[0x419eaf]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x387d421735]
perf[0x419f95]
Fix it by allocating and copying branch info for each new hist entry.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1364816125-12212-2-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sukadev Bhattiprolu [Fri, 29 Mar 2013 19:14:43 +0000 (12:14 -0700)]
perf tools: Fix bug in isupper() and islower()
One of the reasons 'perf test' is failing on Power appears to be due to
a bug in isupper().
isupper(c) and islower(c) should be checking 'c' against the mask 0x20.
Instead they are checking sane_ctype[c] which causes isupper() to be
true for lower case letters.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/20130329192950.GA9312@us.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Inki Dae [Wed, 17 Jul 2013 11:41:15 +0000 (20:41 +0900)]
drm/exynos: add cache operation backend callbacks
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Wed, 17 Jul 2013 06:29:38 +0000 (15:29 +0900)]
drm/exynos: export a gem into dmabuf fd with O_RDWR
user process needs read/write permissions when the user process tires
buffer lock with a exported dmabuf fd through fcntl system call.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Inki Dae [Fri, 12 Jul 2013 05:01:02 +0000 (14:01 +0900)]
dma-buf: add lock callback for fcntl system call.
This patch adds lock callback to dma buf file operations,
and this callback will be called by fcntl system call.
With this patch, fcntl system call can be used for buffer
synchronization between CPU and CPU, and CPU and DMA in user mode.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Inki Dae [Wed, 17 Jul 2013 05:43:43 +0000 (14:43 +0900)]
dmabuf-sync: add cache operation feature
With this patch, all cache operations will be done in kernel side
instead of user side.
P.S. basically, not only user shouldn't need to request cache operation
to kernel but also kernel should't need such things. However, we would
have performance overhead by unnecessary cache operations if we conform
with mainline style: cache sync just before memory ownership moves from
CPU to DMA, and just after memory ownership moves from DMA to CPU.
Signed-off-by: Inki Dae <inki.dae@samsung.com>