dt-bindings: iio: temperature: ltc2983: describe matrix items

Give a little bit of information on what each item in the matrix is
supposed to be.

Also, some matrices put the 'minItems' and 'maxItems' keywords in the
wrong level. They should be on the same level as the 'items' keyword.
Fix it.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-6-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: temperature: ltc2983: remove qutations from phandle ref

Not needed, so why have them?

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-5-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: temperature: ltc2983: use hex for sensor address

Addresses should be in hex, fix it.

Although the driver initially specified 1-20, it can be made free-range
since the address is supposed to match reg, onto which we can impose
restrictions based on the compatible property value.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-4-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: temperature: ltc2983: add default values

Binding properties should have default values to let the reader
know if they should change it. Add them based on driver logic.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221103130041.2153295-3-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: ltc2983: make bulk write buffer DMA-safe

regmap_bulk_write() does not guarantee implicit DMA-safety,
even though the current implementation duplicates the given
buffer. Do not rely on it.

Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ad4130: format list of in_voltage-voltage_filter_mode_available modes

Sphinx reports two warnings on sysfs documentation for AD4130 driver:

Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Unexpected indentation.
Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130:2: WARNING: Block quote ends without a blank line; unexpected unindent.

These are due to misformatting of sinc* modes list. Format it with bullet
list. Since each entry spans multiple lines, separate each with a blank
line.

Fixes: 62094060cf3a ("iio: adc: ad4130: add AD4130 driver")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20221106140233.74112-1-bagasdotme@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers: iio: accel: Add support for ADXL359 device

Add support for ADXL359 device in already existing ADXL355 driver.

Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adxl359.pdf
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Link: https://lore.kernel.org/r/20221031105129.47740-4-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: accel: Add docs for ADXL359

Update ADXL355 existing documentation with documentation
for ADXL359 device.

Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221031105129.47740-3-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers: iio: accel: Use warning if invalid device id is detected

Use warning instead of failing driver probe if invalid device id is
detected for ADXL355 device.

Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Link: https://lore.kernel.org/r/20221031105129.47740-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: st_lsm6dsx: add lsm6dsv device bindings

Introduce device bindings for LSM6DSV IMU sensor.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/c34cea4468dc26050dff812f47e1a21f8e544758.1667216004.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: add support to LSM6DSV

Add support to STM LSM6DSV (accelerometer and gyroscope)
Mems sensor.

Datasheet: https://www.st.com/resource/en/datasheet/lsm6dsv.pdf
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/aad879e7af0fe583bbf043a2b93e32fade79fa19.1667216004.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: introduce sw trigger support

There are some hw configuration where irq0 and/or irq1 pins are not
connected to the SPI or I2C/I3C controller. In order to avoid polling
the output register introduce iio-sw trigger support when irq line is
not available (or hw FIFO is not supported).

Suggested-by: Mario Tesi <mario.tesi@st.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/93ae6ff1150b531a9d7a4d3d1b1adb8383613717.1666955685.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: qcom,spmi-vadc: extend example

Cleanup existing example (generic node name for spmi, use 4-space
indentation) and add example for ADCv7 copied from
Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221027143411.277980-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: qcom,spmi-vadc: simplify compatible enum

The second compatible item in oneOf is just an enum, not a list.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221027143411.277980-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: cc10001: Switch remaining IIO calls in probe to devm_ forms.

As everything else is now handled by devm managed releases the
triggered buffer setup and IIO device registration can also be
moved over to their devm forms allowing dropping of remove().

Only user of drvdata associated with the struct device was the
remove function, so also drop the platform_set_drvdata() call.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016170950.387751-6-jic23@kernel.org

iio: adc: cc10001: Use devm_ to call device power down.

It is presumably safe to call the powerdown whether or not we are
in the commented shared state (the driver always did this).

The power down was previously out of order wrt to the probe() function
so move using devm_ will ensure it occurs after the userspace interfaces
are removed.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016170950.387751-5-jic23@kernel.org

iio: adc: cc10001: Use devm_clk_get_enabled() to avoid boilerplate.

As this driver just enables clock in probe() and disables in remove()
we can use this new function to replace boilerplate and simplify
error paths.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016170950.387751-4-jic23@kernel.org

iio: adc: cc10001: Add devm_add_action_or_reset() to disable regulator.

As the voltage of this regulator is queried, we cannot use the
devm_regulator_get_enable() call and have to role our own disable.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016170950.387751-3-jic23@kernel.org

iio: adc: cc10001: Add local struct device *dev variable to avoid repitition

There are lots of uses of this in probe() and we are about to introduce
some more, so add a local variable to simplify this.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016170950.387751-2-jic23@kernel.org

iio: Don't silently expect attribute types

The iio_triggered_buffer_setup_ext() and the
devm_iio_kfifo_buffer_setup_ext() were changed by
commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr")
to silently expect that all attributes given in buffer_attrs array are
device-attributes. This expectation was not forced by the API - and some
drivers did register attributes created by IIO_CONST_ATTR().

When using IIO_CONST_ATTRs the added attribute "wrapping" does not copy
the pointer to stored string constant and when the sysfs file is read the
kernel will access to invalid location.

Change the function signatures to expect an array of iio_dev_attrs to
avoid similar errors in the future.

Merge conflict resolved whilst applying due to patch crossing with
two new drivers (kx022a accelerometer and ad4130 ADC).

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/63f54787a684eb1232f1c5d275a09c786987fe4a.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: at91-sama5d2_adc: Use IIO_STATIC_CONST_DEVICE_ATTR()

Slightly simplify by dropping open-coded constant data iio_dev_attr
functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/4476a4ce852febb3eb863878e66751c787195b18.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: bmc150-accel-core: Use IIO_STATIC_CONST_DEVICE_ATTR()

Slightly simplify by dropping open-coded constant data iio_dev_attr
functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/b1b0d662705b43d68594639fb7719bc431101f79.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adxl372: Use IIO_STATIC_CONST_DEVICE_ATTR()

Slightly simplify by dropping open-coded constant data iio_dev_attr
functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/3632af8849ef101c54ec1f739596f22c773b067c.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adxl367: Use IIO_STATIC_CONST_DEVICE_ATTR()

Slightly simplify by dropping open-coded constant data iio_dev_attr
functions and using the IIO_STATIC_CONST_DEVICE_ATTR() instead.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/c96c55363b8f36017ef7f18fdfe810cd3990e2a4.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: Add IIO_STATIC_CONST_DEVICE_ATTR

Add IIO_STATIC_CONST_DEVICE_ATTR macro for creating an read-only
iio_dev_attr which returns constant value. This macro is intended to be
used when replacing the IIO_CONST_ATTR - attributes for triggered
buffers because the triggered buffer attributes must be of type
iio_dev_attr.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/8dd853dd0ef8eb40cb980cc6f6e7a43166de3afb.1664782676.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad4130: Fix spelling mistake "diffreential" -> "differential"

There is a spelling mistake in an error message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20221104093148.167765-1-colin.i.king@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

MAINTAINERS: Add KX022A maintainer entry

Add maintainer entry for ROHM/Kionix KX022A accelerometer sensor driver.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/7895435f7fd31a3b576fc6a59b01eb3202c85d36.1666614295.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: Support Kionix/ROHM KX022A accelerometer

KX022A is a 3-axis accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g), and probably some other cool features.

Add support for the basic accelerometer features such as getting the
acceleration data via IIO. (raw reads, triggered buffer [data-ready] or
using the WMI IRQ).

Important things to be added include the double-tap, motion
detection and wake-up as well as the runtime power management.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/758b00d6aea0a6431a5a3a78d557d449c113b21e.1666614295.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: Add KX022A accelerometer

KX022A is a 3-axis Accelerometer from ROHM/Kionix. The sensor features
include variable ODRs, I2C and SPI control, FIFO/LIFO with watermark IRQ,
tap/motion detection, wake-up & back-to-sleep events, four acceleration
ranges (2, 4, 8 and 16g) and probably some other cool features.

Add the basic device tree description for the accelerometer. Only basic
accelerometer features are considered as of now - new properties may or
may not be needed in the future when rest of the features are supported.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/06f8e1ab29d02ed216db10091a269df4b6abad9a.1666614295.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: trigger: sysfs: rename error label in iio_sysfs_trigger_probe()

Rename error label in iio_sysfs_trigger_probe() to make more readable.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221024105250.873394-1-yangyingliang@huawei.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: temperature: mlx90632 Style alignment for the driver

Changing and aligning the overall style of the driver with the recent
reviews. There is no functional change, only type generalization and
moving to the reverse Christmas tree for variable declarations.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Crt Mori <cmo@melexis.com>
Link: https://lore.kernel.org/r/d59aad00891c1a64e044a0f5bc7d40e42d47e9c7.1666606912.git.cmo@melexis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: vl6180: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: st_magn: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-23-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: stk8ba50: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-22-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: stk8312: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-21-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mxc6255: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-20-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mxc4005: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-19-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mma7660: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-15-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: mc3230: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-13-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: kxsd9: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-12-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard10: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-10-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard09: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: dmard06: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-8-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: da311: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: adxl367: Convert to i2c's .probe_new()

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221023132302.911644-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: proximity: sx_common: Use devm_regulator_bulk_get_enable()

This driver only turns the power for some regulators on at probe and off
via a custom devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces all this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Gwendal Grignou <gwendal@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-13-jic23@kernel.org

iio: light: noa1305: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-12-jic23@kernel.org

iio: light: ltr501: Use devm_regulator_bulk_get_enable()

This driver only turns the power for some regulators on at probe and off
via a custom devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces all this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-11-jic23@kernel.org

iio: humidity: hts211: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-10-jic23@kernel.org

iio: frequency: ad9523: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Note that in event of an error on the devm_regulator_get() the driver
would have continued without enabling the regulator which is probably
not a good idea.  So here we handle any error as a reason to fail the
probe(). In theory this may expose breakage on a platform that was
previously papered over but it seems low risk.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-9-jic23@kernel.org

iio: st_sensors: core and lsm9ds0 switch to devm_regulator_bulk_get_enable()

These drivers only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The two regulators were handled
separately so also switch to bulk registration.
The new devm_regulator_bulk_get_enable() replaces all this boilerplate
code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-8-jic23@kernel.org

iio: cdc: ad7150: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-7-jic23@kernel.org

iio: accel: msa311: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Dmitry Rokosov <DDRokosov@sberdevices.ru>
Reviewed-by: Dmitry Rokosov <ddrokosov@sberdevices.ru>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-6-jic23@kernel.org

iio: accel: kxcjk-1013: Use devm_regulator_bulk_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-5-jic23@kernel.org

iio: accel: fxls8962af: Use devm_regulator_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new devm_regulator_get_enable()
replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Sean Nyekjaer <sean@geanix.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-4-jic23@kernel.org

iio: accel: adxl367: Use devm_regulator_bulk_get_enable()

This driver only turns the power on at probe and off via a custom
devm_add_action_or_reset() callback. The new
devm_regulator_bulk_get_enable() replaces this boilerplate code.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221016163409.320197-2-jic23@kernel.org

staging: iio: frequency: ad9834: merge unnecessary split lines

Improve code readability by merging unnecessary split lines that are
well within the code-style guidelines post merge.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Acked-by: Julia Lawall <julia.lawall@inria.fr>
Link: https://lore.kernel.org/r/Y0z2/qFe3kW96MTs@debian-BULLSEYE-live-builder-AMD64
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad4130: add AD4130 driver

AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.

The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221021104115.1812486-3-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add AD4130

AD4130-8 is an ultra-low power, high precision, measurement solution for
low bandwidth battery operated applications.

The fully integrated AFE (Analog Front-End) includes a multiplexer for up
to 16 single-ended or 8 differential inputs, PGA (Programmable Gain
Amplifier), 24-bit Sigma-Delta ADC, on-chip reference and oscillator,
selectable filter options, smart sequencer, sensor biasing and excitation
options, diagnostics, and a FIFO buffer.

Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221021104115.1812486-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: pressure: meas,ms5611: add max SPI frequency to the example

Added max SPI frequency setting to the example.

Signed-off-by: Mitja Spes <mitja@lxnav.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221021135827.1444793-4-mitja@lxnav.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: amplifier: hmc425a: simplify using devm_regulator_get_enable()

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/8b1193fdefb231a6d721e2bded52c48e56039c20.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: max1363: simplify using devm_regulator_get_enable()

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/1286ea127d190e5708a0aaff271819b2d3f8802d.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: max1241: simplify using devm_regulator_get_enable()

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Alexandru Lazar <alazar@startmail.com>
Link: https://lore.kernel.org/r/7c759bf6c06e72ae70bffeebc1939d9903427278.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7606: simplify using devm_regulator_get_enable()

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable() and drop the pointer to the regulator.
This simplifies code and makes it less tempting to add manual control
for the regulator which is also controlled by devm.

Whilst here also switch to dev_err_probe() to provide more information
if a deferred probe occurs.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/521c52f5a9bdc2db04d5775b36df4b233ae338da.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7476: simplify using devm_regulator_get_enable()

Drop open-coded pattern: 'devm_regulator_get(), regulator_enable(),
add_action_or_reset(regulator_disable)' and use the
devm_regulator_get_enable()

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/33070d66b9b976acac1cee5570facef9278b6b61.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: Simplify using devm_regulator_*get_enable()

Use devm_regulator_bulk_get_enable() instead of open coded bulk-get,
bulk-enable, add-action-to-disable-at-detach - pattern.

A functional change (which seems like a bugfix) is that if
regulator_bulk_get fails, the enable is not attempted.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/876e58428cec056d51070e49eff559e2d7c23b12.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: gyro: bmg160_core: Simplify using devm_regulator_*get_enable()

Use devm_regulator_bulk_get_enable() instead of open coded bulk-get,
bulk-enable, add-action-to-disable-at-detach - pattern.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/3fd11489356b1c73a3d7b4bd9dec7e12c9fe8788.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: dac: ltc2688: Simplify using devm_regulator_*get_enable()

Use devm_regulator_bulk_get_enable() instead of open coded bulk-get,
bulk-enable, add-action-to-disable-at-detach - pattern.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/a29493f594c84b3bd852e462bbd3e591a8575a27.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: ad7192: Simplify using devm_regulator_get_enable()

Use devm_regulator_get_enable() instead of open coded get, enable,
add-action-to-disable-at-detach - pattern. Also drop the seemingly unused
struct member 'dvdd'.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/9719c445c095d3d308e2fc9f4f93294f5806c41c.1660934107.git.mazziesaccount@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_mpu: Move exports to IIO_MPU6050 namespace

As these exports are only relevant to core module and users in the
bus specific modules, move them out of the main kernel namespace.

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
--
Dropped Linus' tag as the new patch is significantly different.

v2: Switch to more flexible version of EXPORT* macro from Paul.
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220925155719.3316280-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: inv_icm42600: Move exports to IIO_ICM42600 namespace

As these exports are only relevant to core module and users in the
bus specific modules, move them out of the main kernel namespace.

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
--
EXPORT_NS_GPL_DEV_PM_OPS()

v2: Switch to Paul's more flexible version of the
Acked-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20220925155719.3316280-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: gyro: fxas210002c: Move exports to IIO_FXAS210002C namespace.

Includes using EXPORT_NS_GPL_DEV_PM_OPS() and the simplifications that
brings by allowing the compiler to remove unused struct dev_pm_ops
and callbacks without needing explicit __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
--
Dropped Rui's tag on basis this is rather different from v1 due to
the different macro implementation.

v2: Switch to Paul's more flexible approach to EXPORT_NS_GPL_DEV_PM_OPS()
Acked-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20220925155719.3316280-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: accel: fxls8962af: Use new EXPORT_NS_GPL_DEV_PM_OPS()

Using this macro allows the compiler to remove unused
structures and callbacks if we are not building with
CONFIG_PM* without needing __maybe_unused markings.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sean Nyekjaer <sean@geanix.com>
--
Switched to Paul Cercueil's more flexible implementation fo the macro.
Dropped Sean's Ack given new form of macro being used.

Acked-by: Sean Nyekjaer <sean@geanix.com>
Link: https://lore.kernel.org/r/20220925155719.3316280-3-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: pressure: mpl115: Implementing low power mode by shutdown gpio

MPL115 supports shutdown gpio which can be used to set the state
to low power mode. Power from all internal circuits and
registers is removed. This is done by pulling the SHDN pin to low.
This patch enables runtime PM on MPL115 to increase power savings.

According to spec., a wakeup time period of ~5 ms exists between
waking up and actually communicating with the device. This is
implemented using sleep delay.

Signed-off-by: Rajat Khandelwal <rajat.khandelwal@linux.intel.com>
Link: https://lore.kernel.org/r/20221010173720.568916-1-rajat.khandelwal@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: move 'mlock' to 'struct iio_dev_opaque'

Now that there are no more users accessing 'mlock' directly, we can move
it to the iio_dev private structure. Hence, it's now explicit that new
driver's should not directly use this lock.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221012151620.1725215-5-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: health: max30102: do not use internal iio_dev lock

The pattern used in this device does not quite fit in the
iio_device_claim_direct_mode() typical usage. In this case, we want to
know if we are in buffered mode or not to know if the device is powered
(buffer mode) or not. And depending on that max30102_get_temp() will
power on the device if needed. Hence, in order to keep the same
functionality, we try to:

1. Claim Buffered mode;
2: If 1) succeeds call max30102_get_temp() without powering on the
   device;
3: Release Buffered mode;
4: If 1) fails, Claim Direct mode;
5: If 4) succeeds call max30102_get_temp() with powering on the device;
6: Release Direct mode;
7: If 4) fails, goto to 1) and try again.

This dance between buffered and direct mode is not particularly pretty
(as well as the loop introduced by the goto statement) but it does allow
us to get rid of the mlock usage while keeping the same behavior.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221012151620.1725215-4-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: health: max30100: do not use internal iio_dev lock

The pattern used in this device does not quite fit in the
iio_device_claim_direct_mode() typical usage. In this case,
iio_buffer_enabled() was being used not to prevent the raw
access but to allow it. Hence, let's make use of the new
iio_device_claim_buffer_mode() API to make sure we stay in
buffered mode during the complete read.

Note that we are shadowing the error code returned by
iio_device_claim_buffer_mode() so that we keep the original one
(-EAGAIN). The reason is that some userspace stack might already be
relying on this particular code so that we are not taking chances and
leave it alone.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221012151620.1725215-3-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: core: introduce iio_device_{claim|release}_buffer_mode() APIs

These APIs are analogous to iio_device_claim_direct_mode() and
iio_device_release_direct_mode() but, as the name suggests, with the
logic flipped. While this looks odd enough, it will have at least two
users (in following changes) and it will be important to move the IIO
mlock to the private struct.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221012151620.1725215-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32: manage min sampling time on all internal channels

Force minimum sampling time for all internal channels according
to datasheet requirement. This value can be increased through
DT st,min-sample-time-ns property.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221012142205.13041-5-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: stm32-adc: add stm32mp13 support

Add STM32 ADC support for STM32MP13x SOCs family.

On STM32MP13x, each ADC peripheral has a single ADC block.
These ADC peripherals, ADC1 and ADC2, are fully independent.
This introduces changes in common registers handling.

Some features such as boost mode, channel preselection and
linear calibration are not supported by the STM32MP13x ADC.
Add diversity management for these features.

The STM32MP13x ADC introduces registers and bitfield variants
on existing features such as calibration factors and internal
channels. Add register diversity management.

Add also support for new internal channels VDDCPU and VDDQ_DDR.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20221012142205.13041-4-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: stm32-adc: add stm32mp13 compatibles

Add st,stm32mp13-adc-core and st,stm32mp13-adc compatibles
to support STM32MPU13 SoC.

On STM32MP13x, each ADC peripheral has a single ADC block.
These ADC peripherals, ADC1 and ADC2, are fully independent.

Main characteristics of STM32MP13x ADC:
- One interrupt line per ADC
- 6 to 12 bits resolution
- 19 channels

ADC2 instance supports two extra internal channels VDDCPU and VDDQ_DDR.
Add "vddcpu" and "vddq_ddr" internal channels names to the reserved
labels list.

Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221012142205.13041-3-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: imu: st_lsm6dsx: introduce st_lsm6dsx_device_set_enable routine

Introduce st_lsm6dsx_device_set_enable utility routine and remove
duplicated code used to enable/disable sensors

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/e3fbe5d4a3bed41130908669f745f78c8505cf47.1665399959.git.lorenzo@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: mt6370: Add MediaTek MT6370 support

MediaTek MT6370 is a SubPMIC consisting of a single cell battery charger
with ADC monitoring, RGB LEDs, dual channel flashlight, WLED backlight
driver, display bias voltage supply, one general purpose LDO, and the
USB Type-C & PD controller complies with the latest USB Type-C and PD
standards.

Add support for the MT6370 ADC driver for system monitoring, including
charger current, voltage, and temperature.

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: ChiaEn Wu <chiaen_wu@richtek.com>
Link: https://lore.kernel.org/r/81ec58ae89030e48508d6810396de2679c40d26c.1665488982.git.chiaen_wu@richtek.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Documentation: ABI: testing: add max11410 doc

Adding documentation for Analog Devices max11410 adc userspace sysfs.

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20221003105903.229-4-Ibrahim.Tilki@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: adc: add adi,max11410.yaml

Adding devicetree binding documentation for max11410 adc.

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221003105903.229-3-Ibrahim.Tilki@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: add max11410 adc driver

Adding support for max11410 24-bit, 1.9ksps delta-sigma adc which
has 3 differential reference and 10 differential channel inputs.
Inputs and references can be buffered internally. Inputs can also
be amplified with internal PGA.

Device has four digital filter modes: FIR50/60, FIR50, FIR60 and SINC4.
FIR 50Hz and 60Hz rejections can be enabled/disabled separately.
Digital filter selection affects sampling frequency range so driver
has to consider the configured filter when configuring sampling frequency.

Signed-off-by: Ibrahim Tilki <Ibrahim.Tilki@analog.com>
Link: https://lore.kernel.org/r/20221003105903.229-2-Ibrahim.Tilki@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: resolver: adi,ad2s90: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-8-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: proximity: ams,as3935: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: pressure: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: imu: adi,adis16475: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004115642.63749-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: gyroscope: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: frequency: use spi-peripheral-props.yaml

For devices connectable by SPI bus (e.g. already using
"spi-max-frequency" property), reference the "spi-peripheral-props.yaml"
schema to allow using all SPI device properties, even these which device
bindings author did not tried yet.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: addac: adi,ad74413r: improve example

Improve example by: dropping unrelated properties (status and cs-gpios)
and using generic node name.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: addac: adi,ad74413r: use spi-peripheral-props.yaml

Reference the spi-peripheral-props.yaml schema to allow using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221004115642.63749-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: frequency: change admv4420 maintainer

As the maintainer email no longer exists, change it to myself.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-2-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

dt-bindings: iio: dac: change ad5766 maintainer

As the maintainer email no longer exists, change it to myself.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221005085044.204701-1-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: gyro: itg3200_core: do not use internal iio_dev lock

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-13-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: common: scmi_iio: do not use internal iio_dev lock

The iio_device lock is only meant for internal use. Hence define a
device local lock to protect against concurrent accesses.

While at it, properly include "mutex.h" for mutex related APIs.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-12-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: vf610_adc: vf610_adc: do not use internal iio_dev lock

In order to drop the internal lock usage we needed two different things:

1) The first place where 'mlock' was being used was a typical case where
iio_device_claim_direct_mode() fits perfectly.
2) In the second case, it was being used to prevent concurrent accesses
to the device and shared data but nothing was being enforced with
regards to buffering (i.e, there was nothing preventing from changing
the conversion mode while buffering). Hence, in this case, a new lock
was introduced in the state structure.

Note that the goal is not to introduce any functional change and that is
the reason why a new lock was introduced to guarantee 2).

While at it, properly include "mutex.h" for mutex related APIs.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-11-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

iio: adc: vf610_adc: add helper function to read samples

This is a precursor change to make it simpler to remove the 'mlock'
usage. Having the code in it's own helper function, also makes it easier
to read the error paths.

Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20221004134909.1692021-10-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>