Marek Vasut [Thu, 3 Sep 2009 02:40:03 +0000 (04:40 +0200)]
[ARM] pxa/palm: fix possibly uninitialized variable in PalmTC-pcmcia
This 'problem' actually cant cause a failure of the driver, but it's always
better to be correct.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Thu, 16 Jul 2009 11:30:47 +0000 (13:30 +0200)]
[ARM] pxa: Palm Tungsten|C PCMCIA support
This patch adds support for PCMCIA socket found in Palm Tungsten|C.
There is Prism3 based WiFi card hardwired to that socket.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Thu, 16 Jul 2009 11:26:48 +0000 (13:26 +0200)]
[ARM] pxa: Palm Tungsten|C initial support
This patch adds basic support for Palm Tungsten|C handheld.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Mon, 27 Jul 2009 00:07:41 +0000 (02:07 +0200)]
[ARM] pxa/palm: Add NOR Flash support for PalmTX
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Sat, 18 Jul 2009 14:51:41 +0000 (16:51 +0200)]
[ARM] pxa/palm: add NAND Flash support for PalmTX
This patch adds support for NAND chip found in PalmTX handheld. Support
is implemented through the gen_nand driver.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Fri, 17 Jul 2009 17:46:58 +0000 (19:46 +0200)]
[ARM] pxa/palm: Add NOR flash support for PalmLD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Marek Vasut [Thu, 16 Jul 2009 17:38:41 +0000 (19:38 +0200)]
[ARM] pxa/palm: add detect_delay to mmc for PalmTX,T5,LD
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Mike Rapoport [Mon, 3 Aug 2009 09:07:52 +0000 (12:07 +0300)]
[ARM] pxa/cm-x270: add libertas device registration
v2 changes:
- use gpio_to_irq instead of IRQ_GPIO
- check gpio_direction_output return value to be on the safe side :)
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Mike Rapoport [Sun, 26 Jul 2009 10:48:40 +0000 (13:48 +0300)]
[ARM] pxa/em-x270: add vcc_core regulator
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Mike Rapoport [Sun, 26 Jul 2009 10:48:39 +0000 (13:48 +0300)]
[ARM] pxa/em-x270: remove debug leftovers
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Guennadi Liakhovetski [Tue, 12 May 2009 16:12:29 +0000 (18:12 +0200)]
[ARM] pxa/em-x270: convert em-x270 to soc-camera as platform-device
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Guennadi Liakhovetski [Fri, 24 Apr 2009 16:40:27 +0000 (18:40 +0200)]
[ARM] pxa/mioa701: convert mioa701 to the new platform-device soc-camera interface
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Guennadi Liakhovetski [Wed, 13 May 2009 09:33:43 +0000 (11:33 +0200)]
[ARM] pxa/pcm990: convert pcm990 to soc-camera as platform-device
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Alex Roman [Fri, 3 Jul 2009 06:58:59 +0000 (14:58 +0800)]
[ARM] pxa/colibri: add UART MFP configuration for the PXA320 module
This patch configures the MFP pads for UART1, UART2, UART3 for the
Toradex Colibri PXA320 module. Previously they were just not
configured resulting in just the first UART working because it was the
only one that was configured by the bootloader (Toradex EBOOT in our
case).
This patch is against vanilla 2.6.30 and has been tested with the
Toradex Orchid carrier board (all three UARTs were functional).
Signed-off-by: Alex Roman <alex.roman@gmail.com>
Acked-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Wed, 17 Jun 2009 08:32:54 +0000 (10:32 +0200)]
[ARM] pxa/colibri: add NAND config for Colibri PXA3xx boards
NAND feature will be enabled when the appropriate config option is set.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Ribeiro [Tue, 23 Jun 2009 15:39:25 +0000 (12:39 -0300)]
[ARM] pxa/ezx: set IRQ_BOARD_END for EZX
Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Eric Miao [Mon, 13 Jul 2009 14:57:56 +0000 (22:57 +0800)]
[ARM] pxa/littleton: update littleton to use the new gpio_card_detect for mmc
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Robert Jarzmik [Mon, 6 Jul 2009 20:16:42 +0000 (22:16 +0200)]
[ARM] pxa: factor pxamci gpio handling
Several boards use always the same pattern with pxamci :
request gpio, request irq for that gpio to detect MMC card
insertion, request gpio for read-only mode detection, etc
...
Now that pxamci provides platform_data to describe simple
gpio management of the MMC external controls, use it.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Acked-by: Philipp Zabel <philipp.zabel@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Cc: rpurdie@rpsys.net
Cc: drwyrm@gmail.com
Cc: sakoman@gmail.com
Cc: marek.vasut@gmail.com
Cc: s.hauer@pengutronix.de
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Robert Jarzmik [Tue, 23 Jun 2009 21:21:03 +0000 (23:21 +0200)]
[ARM] pxamci: add simple gpio controls
The MMC block needs 3 external datas to work :
- is the MMC card put in "read-only mode" ?
- is a MMC card inserted or removed ?
- enable power towards the MMC card
Several platforms provide these controls through
gpios. Expand the platform_data to request and use these
gpios is set up by board code.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Pierre.Ossman <pierre@ossman.eu>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Mon, 22 Jun 2009 19:08:04 +0000 (21:08 +0200)]
[ARM] pxafb: use resource_size() function
Cleanup only, no function change.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Robert Jarzmik [Sat, 8 Aug 2009 21:07:22 +0000 (23:07 +0200)]
[ARM] pxa/dma: add debugfs entries
Add some debug information for PXA DMA :
- descriptors queued
- channels state
- global state
--
Since V1: reverted to old register access (no more dma_readl() or dma_writel()).
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Robert Jarzmik [Sat, 8 Aug 2009 21:07:21 +0000 (23:07 +0200)]
[ARM] pxa/dma: optimize irq handler loop
Reduce loop for dma irq handler callbacks to the minimum
required.
Since V1: included suggestion from Nicolas Pitre to improve
even further the loop.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Robert Jarzmik [Sat, 8 Aug 2009 21:07:20 +0000 (23:07 +0200)]
[ARM] pxa/dma: cosmetic move of EXPORT_SYMBOL under their functions
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 1 Jul 2009 06:17:16 +0000 (14:17 +0800)]
[ARM] pxa: merge {zylonite,littleton}_defconfig into pxa3xx_defconfig
Merge zylonite_defconfig and littleton_defconfig into pxa3xx_defconfig.
Since they're similar platform and servicing for same SoC family.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Fri, 4 Sep 2009 09:37:17 +0000 (17:37 +0800)]
[ARM] pxa: update dependancy of pxa i2c module
PXA I2C module is also used in Marvell PXA168 and PXA910 series.
Update the module dependancy of PXA I2C.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Thu, 9 Jul 2009 17:04:50 +0000 (19:04 +0200)]
[ARM] pxa: rename GCU IRQ for consistency
For consistency reasons, rename IRQ_GRPHICS to IRQ_GCU.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Thu, 9 Jul 2009 17:04:49 +0000 (19:04 +0200)]
[ARM] pxa: add device definition for graphics controller
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Thu, 9 Jul 2009 17:04:48 +0000 (19:04 +0200)]
[ARM] pxa: add clock definition for graphics controller
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 19 Aug 2009 11:49:31 +0000 (19:49 +0800)]
[ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 19 Aug 2009 11:30:24 +0000 (19:30 +0800)]
[ARM] pxa: add more registers in interrupt controller
Add priority registers and new registers of pxa935.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 26 Aug 2009 02:32:00 +0000 (10:32 +0800)]
[ARM] pxa: add cpu_is_pxa950() and Kconfig options
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Fri, 21 Aug 2009 08:10:41 +0000 (16:10 +0800)]
[ARM] pxa: update cpu_is_xsc3() to include Marvell CPUID
CPU id is changed in Marvell chip. So update the code in cpu_is_xsc3().
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Mon, 31 Aug 2009 09:23:44 +0000 (17:23 +0800)]
[ARM] pxa: expand irq support for PXA93x and PXA950
PXA93x/950 has additional 64 GPIOs, each is a secondary interrupt
source for IRQ_GPIO_2_x, extend PXA_GPIO_IRQ_{BASE,NUM}.
PXA93x/950 specific IRQ definitions are added as well.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Wed, 17 Jun 2009 05:57:40 +0000 (13:57 +0800)]
[ARM] pxa: support mfp of pxa935
Add and initialize the mfp setting of pxa935 chip.
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Daniel Mack [Tue, 11 Aug 2009 12:39:09 +0000 (14:39 +0200)]
[ARM] pxa: add MFP_PULL_FLOAT
There is currently an uncovered case for MFP configuration on PXAs which
is selected by setting the PULL_SEL bit but none of the PULL{UP,DOWN}_EN
bits. This case is needed to explicitly let pins float, even if the
selected alternate function would default to a configuration with a pull
resistor enabled.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Haojian Zhuang [Mon, 31 Aug 2009 12:16:54 +0000 (20:16 +0800)]
[ARM] pxa: remove duplicate mfp definition in mach
Signed-off-by: Haojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Philipp Zabel [Fri, 7 Aug 2009 13:51:12 +0000 (15:51 +0200)]
[ARM] pxa: remove left-over struct clk *other field from struct clk
Its removal was omitted when all its uses were removed in
8c3abc7d...
"[ARM] pxa: convert to clkdev and match clocks by struct device where possible"
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Linus Torvalds [Wed, 9 Sep 2009 22:13:59 +0000 (15:13 -0700)]
Linux 2.6.31
Ed Cashin [Wed, 9 Sep 2009 12:10:18 +0000 (14:10 +0200)]
aoe: allocate unused request_queue for sysfs
Andy Whitcroft reported an oops in aoe triggered by use of an
incorrectly initialised request_queue object:
[ 2645.959090] kobject '<NULL>' (
ffff880059ca22c0): tried to add
an uninitialized object, something is seriously wrong.
[ 2645.959104] Pid: 6, comm: events/0 Not tainted 2.6.31-5-generic #24-Ubuntu
[ 2645.959107] Call Trace:
[ 2645.959139] [<
ffffffff8126ca2f>] kobject_add+0x5f/0x70
[ 2645.959151] [<
ffffffff8125b4ab>] blk_register_queue+0x8b/0xf0
[ 2645.959155] [<
ffffffff8126043f>] add_disk+0x8f/0x160
[ 2645.959161] [<
ffffffffa01673c4>] aoeblk_gdalloc+0x164/0x1c0 [aoe]
The request queue of an aoe device is not used but can be allocated in
code that does not sleep.
Bruno bisected this regression down to
cd43e26f071524647e660706b784ebcbefbd2e44
block: Expose stacked device queues in sysfs
"This seems to generate /sys/block/$device/queue and its contents for
everyone who is using queues, not just for those queues that have a
non-NULL queue->request_fn."
Addresses http://bugs.launchpad.net/bugs/410198
Addresses http://bugzilla.kernel.org/show_bug.cgi?id=13942
Note that embedding a queue inside another object has always been
an illegal construct, since the queues are reference counted and
must persist until the last reference is dropped. So aoe was
always buggy in this respect (Jens).
Signed-off-by: Ed Cashin <ecashin@coraid.com>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Bruno Premont <bonbons@linux-vserver.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Linus Torvalds [Wed, 9 Sep 2009 00:09:24 +0000 (17:09 -0700)]
i915: disable interrupts before tearing down GEM state
Reinette Chatre reports a frozen system (with blinking keyboard LEDs)
when switching from graphics mode to the text console, or when
suspending (which does the same thing). With netconsole, the oops
turned out to be
BUG: unable to handle kernel NULL pointer dereference at
0000000000000084
IP: [<
ffffffffa03ecaab>] i915_driver_irq_handler+0x26b/0xd20 [i915]
and it's due to the i915_gem.c code doing drm_irq_uninstall() after
having done i915_gem_idle(). And the i915_gem_idle() path will do
i915_gem_idle() ->
i915_gem_cleanup_ringbuffer() ->
i915_gem_cleanup_hws() ->
dev_priv->hw_status_page = NULL;
but if an i915 interrupt comes in after this stage, it may want to
access that hw_status_page, and gets the above NULL pointer dereference.
And since the NULL pointer dereference happens from within an interrupt,
and with the screen still in graphics mode, the common end result is
simply a silently hung machine.
Fix it by simply uninstalling the irq handler before idling rather than
after. Fixes
http://bugzilla.kernel.org/show_bug.cgi?id=13819
Reported-and-tested-by: Reinette Chatre <reinette.chatre@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Zhenyu Wang [Tue, 8 Sep 2009 06:52:25 +0000 (14:52 +0800)]
drm/i915: fix mask bits setting
eDP is exclusive connector too, and add missing crtc_mask
setting for TV.
This fixes
http://bugzilla.kernel.org/show_bug.cgi?id=14139
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Reported-and-tested-by: Carlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Mon, 7 Sep 2009 18:42:25 +0000 (11:42 -0700)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
Linus Torvalds [Mon, 7 Sep 2009 18:41:15 +0000 (11:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
IMA: update ima_counts_put
Linus Torvalds [Mon, 7 Sep 2009 18:40:24 +0000 (11:40 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
gianfar: Fix build.
Linus Torvalds [Mon, 7 Sep 2009 18:40:15 +0000 (11:40 -0700)]
Merge git://git./linux/kernel/git/davem/ide-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
pcmcia: add CNF-CDROM-ID for ide
Linus Torvalds [Mon, 7 Sep 2009 18:38:30 +0000 (11:38 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
agp/intel: support for new chip variant of IGDNG mobile
drm/i915: Unref old_obj on get_fence_reg() error path
drm/i915: increase default latency constant (v2 w/comment)
Dave Airlie [Mon, 7 Sep 2009 05:26:19 +0000 (15:26 +1000)]
drm/radeon/kms: add LTE/GTE discard + rv515 two sided stencil register.
This adds some rv350+ register for LTE/GTE discard,
and enables the rv515 two sided stencil register.
It also disables the DEPTHXY_OFFSET register which
can be used to workaround the CS checker.
Moves rs690 to proper place in rs600 and uses correct
table on rs600.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Mimi Zohar [Fri, 4 Sep 2009 17:08:46 +0000 (13:08 -0400)]
IMA: update ima_counts_put
- As ima_counts_put() may be called after the inode has been freed,
verify that the inode is not NULL, before dereferencing it.
- Maintain the IMA file counters in may_open() properly, decrementing
any counter increments on subsequent errors.
Reported-by: Ciprian Docan <docan@eden.rutgers.edu>
Reported-by: J.R. Okajima <hooanon05@yahoo.co.jp>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Acked-by: Eric Paris <eparis@redhat.com
Signed-off-by: James Morris <jmorris@namei.org>
David S. Miller [Sun, 6 Sep 2009 08:41:02 +0000 (01:41 -0700)]
gianfar: Fix build.
Reported by Michael Guntsche <mike@it-loops.com>
--------------------
Commit
38bddf04bcfe661fbdab94888c3b72c32f6873b3 gianfar: gfar_remove needs to call unregister_netdev()
breaks the build of the gianfar driver because "dev" is undefined in
this function. To quickly test rc9 I changed this to priv->ndev but I do
not know if this is the correct one.
--------------------
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sat, 5 Sep 2009 23:38:12 +0000 (16:38 -0700)]
Linux 2.6.31-rc9
Linus Torvalds [Sat, 5 Sep 2009 21:59:00 +0000 (14:59 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: sbp2: fix freeing of unallocated memory
firewire: ohci: fix Ricoh R5C832, video reception
firewire: ohci: fix Agere FW643 and multiple cameras
firewire: core: fix crash in iso resource management
Roderick Colenbrander [Thu, 3 Sep 2009 15:57:23 +0000 (09:57 -0600)]
powerpc: Fix i8259 interrupt driver kernel crash on ML510
This patch fixes a null pointer exception caused by removal of
'ack()' for level interrupts in the Xilinx interrupt driver. A recent
change to the xilinx interrupt controller removed the ack hook for
level irqs.
Signed-off-by: Roderick Colenbrander <thunderbird2k@gmail.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 5 Sep 2009 21:57:04 +0000 (14:57 -0700)]
Merge git://git.infradead.org/~dwmw2/mtd-2.6.31
* git://git.infradead.org/~dwmw2/mtd-2.6.31:
JFFS2: add missing verify buffer allocation/deallocation
mtd: nftl: fix offset alignments
mtd: nftl: write support is broken
mtd: m25p80: fix null pointer dereference bug
Linus Torvalds [Sat, 5 Sep 2009 21:56:13 +0000 (14:56 -0700)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
block: Allow changing max_sectors_kb above the default 512
Linus Torvalds [Sat, 5 Sep 2009 21:55:30 +0000 (14:55 -0700)]
Merge branch 'fix/oxygen' of git://git./linux/kernel/git/tiwai/sound-2.6
* 'fix/oxygen' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
sound: oxygen: handle cards with missing EEPROM
sound: oxygen: fix MCLK rate for 192 kHz playback
Linus Torvalds [Sat, 5 Sep 2009 21:52:41 +0000 (14:52 -0700)]
Merge git://git./linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
tc: Fix unitialized kernel memory leak
pkt_sched: Revert tasklet_hrtimer changes.
net: sk_free() should be allowed right after sk_alloc()
gianfar: gfar_remove needs to call unregister_netdev()
ipw2200: firmware DMA loading rework
Linus Torvalds [Sat, 5 Sep 2009 21:51:45 +0000 (14:51 -0700)]
Merge git://git./linux/kernel/git/herbert/crypto-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: skcipher - Fix skcipher_dequeue_givcrypt NULL test
Linus Torvalds [Sat, 5 Sep 2009 21:51:24 +0000 (14:51 -0700)]
Merge branch 'fixes' of git://git./linux/kernel/git/davej/cpufreq
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Re-enable cpufreq suspend and resume code
Linus Torvalds [Sat, 5 Sep 2009 21:50:53 +0000 (14:50 -0700)]
Merge branch 'release' of git://git./linux/kernel/git/aegl/linux-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6:
[IA64] fix csum_ipv6_magic()
[IA64] Fix warning in dma-mapping.c
Linus Torvalds [Sat, 5 Sep 2009 21:25:14 +0000 (14:25 -0700)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
* 'for-linus' of git://oss.sgi.com/xfs/xfs:
xfs: actually enable the swapext compat handler
Linus Torvalds [Sat, 5 Sep 2009 21:24:33 +0000 (14:24 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ryusuke/nilfs2
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_key
Linus Torvalds [Sat, 5 Sep 2009 21:22:00 +0000 (14:22 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
percpu: don't assume existence of cpu0
Linus Torvalds [Sat, 5 Sep 2009 20:57:53 +0000 (13:57 -0700)]
Merge branch 'slab/urgent' of git://git./linux/kernel/git/penberg/slab-2.6
* 'slab/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
Linus Torvalds [Sat, 5 Sep 2009 20:51:07 +0000 (13:51 -0700)]
Merge git://git./linux/kernel/git/agk/linux-2.6-dm
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm snapshot: fix on disk chunk size validation
dm exception store: split set_chunk_size
dm snapshot: fix header corruption race on invalidation
dm snapshot: refactor zero_disk_area to use chunk_io
dm log: userspace add luid to distinguish between concurrent log instances
dm raid1: do not allow log_failure variable to unset after being set
dm log: remove incorrect field from userspace table output
dm log: fix userspace status output
dm stripe: expose correct io hints
dm table: add more context to terse warning messages
dm table: fix queue_limit checking device iterator
dm snapshot: implement iterate devices
dm multipath: fix oops when request based io fails when no paths
Linus Torvalds [Sat, 5 Sep 2009 20:50:46 +0000 (13:50 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI SR-IOV: correct broken resource alignment calculations
Linus Torvalds [Sat, 5 Sep 2009 20:49:06 +0000 (13:49 -0700)]
Merge git://git./linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
sparc64: Fix bootup with mcount in some configs.
sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.
Linus Torvalds [Sat, 5 Sep 2009 20:48:37 +0000 (13:48 -0700)]
Merge branch 'perfcounters-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter/powerpc: Fix cache event codes for POWER7
perf_counter: Fix /0 bug in swcounters
perf_counters: Increase paranoia level
Linus Torvalds [Sat, 5 Sep 2009 20:41:29 +0000 (13:41 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: atkbd - add Compaq Presario R4000-series repeat quirk
Input: i8042 - add Acer Aspire 5536 to the nomux list
Nicolas Pitre [Sat, 5 Sep 2009 04:25:37 +0000 (00:25 -0400)]
ext2: fix unbalanced kmap()/kunmap()
In ext2_rename(), dir_page is acquired through ext2_dotdot(). It is
then released through ext2_set_link() but only if old_dir != new_dir.
Failing that, the pkmap reference count is never decremented and the
page remains pinned forever. Repeat that a couple times with highmem
pages and all pkmap slots get exhausted, and every further kmap() calls
end up stalling on the pkmap_map_wait queue at which point the whole
system comes to a halt.
Signed-off-by: Nicolas Pitre <nico@marvell.com>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 5 Sep 2009 20:38:37 +0000 (13:38 -0700)]
Merge branch 'upstream-linus' of git://git./linux/kernel/git/jlbec/ocfs2
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2:
ocfs2: ocfs2_write_begin_nolock() should handle len=0
ocfs2: invalidate dentry if its dentry_lock isn't initialized.
Linus Torvalds [Sat, 5 Sep 2009 20:27:10 +0000 (13:27 -0700)]
pty: don't limit the writes to 'pty_space()' inside 'pty_write()'
The whole write-room thing is something that is up to the _caller_ to
worry about, not the pty layer itself. The total buffer space will
still be limited by the buffering routines themselves, so there is no
advantage or need in having pty_write() artificially limit the size
somehow.
And what happened was that the caller (the n_tty line discipline, in
this case) may have verified that there is room for 2 bytes to be
written (for NL -> CRNL expansion), and it used to then do those writes
as two single-byte writes. And if the first byte written (CR) then
caused a new tty buffer to be allocated, pty_space() may have returned
zero when trying to write the second byte (LF), and then incorrectly
failed the write - leading to a lost newline character.
This should finally fix
http://bugzilla.kernel.org/show_bug.cgi?id=14015
Reported-by: Mikael Pettersson <mikpe@it.uu.se>
Acked-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 5 Sep 2009 19:46:07 +0000 (12:46 -0700)]
n_tty: do O_ONLCR translation as a single write
When translating CR to CRNL in the n_tty line discipline, we did it as
two tty_put_char() calls. Which works, but is stupid, and has caused
problems before too with bad interactions with the write_room() logic.
The generic USB serial driver had that problem, for example.
Now the pty layer had similar issues after being moved to the generic
tty buffering code (in commit
d945cb9cce20ac7143c2de8d88b187f62db99bdc:
"pty: Rework the pty layer to use the normal buffering logic").
So stop doing the silly separate two writes, and do it as a single write
instead. That's what the n_tty layer already does for the space
expansion of tabs (XTABS), and it means that we'll now always have just
a single write for the CRNL to match the single 'tty_write_room()' test,
which hopefully means that the next time somebody screws up buffering,
it won't cause weeks of debugging.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sat, 5 Sep 2009 18:17:13 +0000 (11:17 -0700)]
exec: do not sleep in TASK_TRACED under ->cred_guard_mutex
Tom Horsley reports that his debugger hangs when it tries to read
/proc/pid_of_tracee/maps, this happens since
"mm_for_maps: take ->cred_guard_mutex to fix the race with exec"
04b836cbf19e885f8366bccb2e4b0474346c02d
commit in 2.6.31.
But the root of the problem lies in the fact that do_execve() path calls
tracehook_report_exec() which can stop if the tracer sets PT_TRACE_EXEC.
The tracee must not sleep in TASK_TRACED holding this mutex. Even if we
remove ->cred_guard_mutex from mm_for_maps() and proc_pid_attr_write(),
another task doing PTRACE_ATTACH should not hang until it is killed or the
tracee resumes.
With this patch do_execve() does not use ->cred_guard_mutex directly and
we do not hold it throughout, instead:
- introduce prepare_bprm_creds() helper, it locks the mutex
and calls prepare_exec_creds() to initialize bprm->cred.
- install_exec_creds() drops the mutex after commit_creds(),
and thus before tracehook_report_exec()->ptrace_stop().
or, if exec fails,
free_bprm() drops this mutex when bprm->cred != NULL which
indicates install_exec_creds() was not called.
Reported-by: Tom Horsley <tom.horsley@att.net>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Roland McGrath <roland@redhat.com>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mel Gorman [Sat, 5 Sep 2009 18:17:11 +0000 (11:17 -0700)]
page-allocator: always change pageblock ownership when anti-fragmentation is disabled
On low-memory systems, anti-fragmentation gets disabled as fragmentation
cannot be avoided on a sufficiently large boundary to be worthwhile. Once
disabled, there is a period of time when all the pageblocks are marked
MOVABLE and the expectation is that they get marked UNMOVABLE at each call
to __rmqueue_fallback().
However, when MAX_ORDER is large the pageblocks do not change ownership
because the normal criteria are not met. This has the effect of
prematurely breaking up too many large contiguous blocks. This is most
serious on NOMMU systems which depend on high-order allocations to boot.
This patch causes pageblocks to change ownership on every fallback when
anti-fragmentation is disabled. This prevents the large blocks being
prematurely broken up.
This is a fix to commit
49255c619fbd482d704289b5eb2795f8e3b7ff2e [page
allocator: move check for disabled anti-fragmentation out of fastpath] and
the problem affects 2.6.31-rc8.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Tested-by: Paul Mundt <lethal@linux-sh.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Howells [Sat, 5 Sep 2009 18:17:07 +0000 (11:17 -0700)]
nommu: fix error handling in do_mmap_pgoff()
Fix the error handling in do_mmap_pgoff(). If do_mmap_shared_file() or
do_mmap_private() fail, we jump to the error_put_region label at which
point we cann __put_nommu_region() on the region - but we haven't yet
added the region to the tree, and so __put_nommu_region() may BUG
because the region tree is empty or it may corrupt the region tree.
To get around this, we can afford to add the region to the region tree
before calling do_mmap_shared_file() or do_mmap_private() as we keep
nommu_region_sem write-locked, so no-one can race with us by seeing a
transient region.
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Mel Gorman <mel@csn.ul.ie>
Acked-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Oleg Nesterov [Sat, 5 Sep 2009 18:17:06 +0000 (11:17 -0700)]
workqueues: introduce __cancel_delayed_work()
cancel_delayed_work() has to use del_timer_sync() to guarantee the timer
function is not running after return. But most users doesn't actually
need this, and del_timer_sync() has problems: it is not useable from
interrupt, and it depends on every lock which could be taken from irq.
Introduce __cancel_delayed_work() which calls del_timer() instead.
The immediate reason for this patch is
http://bugzilla.kernel.org/show_bug.cgi?id=13757
but hopefully this helper makes sense anyway.
As for 13757 bug, actually we need requeue_delayed_work(), but its
semantics are not yet clear.
Merge this patch early to resolves cross-tree interdependencies between
input and infiniband.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Roland Dreier <rdreier@cisco.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stefan Richter [Thu, 3 Sep 2009 21:07:35 +0000 (23:07 +0200)]
firewire: sbp2: fix freeing of unallocated memory
If a target writes invalid status (typically status of a command that
already timed out), firewire-sbp2 attempts to put away an ORB that
doesn't exist. https://bugzilla.redhat.com/show_bug.cgi?id=519772
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Stefan Richter [Fri, 28 Aug 2009 11:26:03 +0000 (13:26 +0200)]
firewire: ohci: fix Ricoh R5C832, video reception
In dual-buffer DMA mode, no video frames are ever received from R5C832
by libdc1394. Fallback to packet-per-buffer DMA works reliably.
http://thread.gmane.org/gmane.linux.kernel.firewire.devel/13393/focus=13476
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Stefan Richter [Fri, 28 Aug 2009 11:25:15 +0000 (13:25 +0200)]
firewire: ohci: fix Agere FW643 and multiple cameras
An Agere FW643 OHCI 1.1 card works fine for video reception from one
camera but fails early if receiving from two cameras. After a short
while, no IR IRQ events occur and the context control register does not
react anymore. This happens regardless whether both IR DMA contexts are
dual-buffer or one is dual-buffer and the other packet-per-buffer.
This can be worked around by disabling dual buffer DMA mode entirely.
http://sourceforge.net/mailarchive/message.php?msg_name=
4A7C0594.2020208%40gmail.com
(Reported by Samuel Audet.)
In another report (by Jonathan Cameron), an FW643 works OK with two
cameras in dual buffer mode. Whether this is due to different chip
revisions or different usage patterns (different video formats) is not
yet clear. However, as far as the current capabilities of
firewire-core's isochronous I/O interface are concerned, simply
switching off dual-buffer on non-working and working FW643s alike is not
a problem in practice. We only need to revisit this issue if we are
going to enhance the interface, e.g. so that applications can explicitly
choose modes.
Reported-by: Samuel Audet <samuel.audet@gmail.com>
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Stefan Richter [Sat, 5 Sep 2009 11:23:49 +0000 (13:23 +0200)]
firewire: core: fix crash in iso resource management
This fixes a regression due to post 2.6.30 commit "firewire: core: do
not DMA-map stack addresses"
6fdc03709433ccc2005f0f593ae9d9dd04f7b485.
As David Moore noted, a previously correct sizeof() expression became
wrong since the commit changed its argument from an array to a pointer.
This resulted in an oops in ohci_cancel_packet in the shared workqueue
thread's context when an isochronous resource was to be freed.
Reported-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Sunil Mushran [Fri, 4 Sep 2009 18:12:01 +0000 (11:12 -0700)]
ocfs2: ocfs2_write_begin_nolock() should handle len=0
Bug introduced by mainline commit
e7432675f8ca868a4af365759a8d4c3779a3d922
The bug causes ocfs2_write_begin_nolock() to oops when len=0.
Signed-off-by: Sunil Mushran <sunil.mushran@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Joel Becker <joel.becker@oracle.com>
Mikulas Patocka [Fri, 4 Sep 2009 19:40:43 +0000 (20:40 +0100)]
dm snapshot: fix on disk chunk size validation
Fix some problems seen in the chunk size processing when activating a
pre-existing snapshot.
For a new snapshot, the chunk size can either be supplied by the creator
or a default value can be used. For an existing snapshot, the
chunk size in the snapshot header on disk should always be used.
If someone attempts to load an existing snapshot and has the 'default
chunk size' option set, the kernel uses its default value even when it
is incorrect for the snapshot being loaded. This patch ensures the
correct on-disk value is always used.
Secondly, when the code does use the chunk size stored on the disk it is
prudent to revalidate it, so the code can exit cleanly if it got
corrupted as happened in
https://bugzilla.redhat.com/show_bug.cgi?id=461506 .
Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 4 Sep 2009 19:40:41 +0000 (20:40 +0100)]
dm exception store: split set_chunk_size
Break the function set_chunk_size to two functions in preparation for
the fix in the following patch.
Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 4 Sep 2009 19:40:39 +0000 (20:40 +0100)]
dm snapshot: fix header corruption race on invalidation
If a persistent snapshot fills up, a race can corrupt the on-disk header
which causes a crash on any future attempt to activate the snapshot
(typically while booting). This patch fixes the race.
When the snapshot overflows, __invalidate_snapshot is called, which calls
snapshot store method drop_snapshot. It goes to persistent_drop_snapshot that
calls write_header. write_header constructs the new header in the "area"
location.
Concurrently, an existing kcopyd job may finish, call copy_callback
and commit_exception method, that goes to persistent_commit_exception.
persistent_commit_exception doesn't do locking, relying on the fact that
callbacks are single-threaded, but it can race with snapshot invalidation and
overwrite the header that is just being written while the snapshot is being
invalidated.
The result of this race is a corrupted header being written that can
lead to a crash on further reactivation (if chunk_size is zero in the
corrupted header).
The fix is to use separate memory areas for each.
See the bug: https://bugzilla.redhat.com/show_bug.cgi?id=461506
Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 4 Sep 2009 19:40:37 +0000 (20:40 +0100)]
dm snapshot: refactor zero_disk_area to use chunk_io
Refactor chunk_io to prepare for the fix in the following patch.
Pass an area pointer to chunk_io and simplify zero_disk_area to use
chunk_io. No functional change.
Cc: stable@kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jonathan Brassow [Fri, 4 Sep 2009 19:40:34 +0000 (20:40 +0100)]
dm log: userspace add luid to distinguish between concurrent log instances
Device-mapper userspace logs (like the clustered log) are
identified by a universally unique identifier (UUID). This
identifier is used to associate requests from the kernel to
a specific log in userspace. The UUID must be unique everywhere,
since multiple machines may use this identifier when communicating
about a particular log, as is the case for cluster logs.
Sometimes, device-mapper/LVM may re-use a UUID. This is the
case during pvmoves, when moving from one segment of an LV
to another, or when resizing a mirror, etc. In these cases,
a new log is created with the same UUID and loaded in the
"inactive" slot. When a device-mapper "resume" is issued,
the "live" table is deactivated and the new "inactive" table
becomes "live". (The "inactive" table can also be removed
via a device-mapper 'clear' command.)
The above two issues were colliding. More than one log was being
created with the same UUID, and there was no way to distinguish
between them. So, sometimes the wrong log would be swapped
out during the exchange.
The solution is to create a locally unique identifier,
'luid', to go along with the UUID. This new identifier is used
to determine exactly which log is being referenced by the kernel
when the log exchange is made. The identifier is not
universally safe, but it does not need to be, since
create/destroy/suspend/resume operations are bound to a specific
machine; and these are the operations that make up the exchange.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jonathan Brassow [Fri, 4 Sep 2009 19:40:32 +0000 (20:40 +0100)]
dm raid1: do not allow log_failure variable to unset after being set
This patch fixes a bug which was triggering a case where the primary leg
could not be changed on failure even when the mirror was in-sync.
The case involves the failure of the primary device along with
the transient failure of the log device. The problem is that
bios can be put on the 'failures' list (due to log failure)
before 'fail_mirror' is called due to the primary device failure.
Normally, this is fine, but if the log device failure is transient,
a subsequent iteration of the work thread, 'do_mirror', will
reset 'log_failure'. The 'do_failures' function then resets
the 'in_sync' variable when processing bios on the failures list.
The 'in_sync' variable is what is used to determine if the
primary device can be switched in the event of a failure. Since
this has been reset, the primary device is incorrectly assumed
to be not switchable.
The case has been seen in the cluster mirror context, where one
machine realizes the log device is dead before the other machines.
As the responsibilities of the server migrate from one node to
another (because the mirror is being reconfigured due to the failure),
the new server may think for a moment that the log device is fine -
thus resetting the 'log_failure' variable.
In any case, it is inappropiate for us to reset the 'log_failure'
variable. The above bug simply illustrates that it can actually
hurt us.
Cc: stable@kernel.org
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jonathan Brassow [Fri, 4 Sep 2009 19:40:30 +0000 (20:40 +0100)]
dm log: remove incorrect field from userspace table output
The output of 'dmsetup table' includes an internal field that should not
be there. This patch removes it. To make the fix simpler, we first
reorder a constructor argument
The 'device size' argument is generated internally. Currently it is
placed as the last space-separated word of the constructor string.
However, we need to use a version of the string without this word, so we
move it to the beginning instead so it is trivial to skip past it.
We keep a copy of the arguments passed to userspace for creating a log,
just in case we need to resend them. These are the same arguments that
are desired in the STATUSTYPE_TABLE request, except for one. When
creating the userspace log, the userspace daemon must know the size of
the mirror, so that is added to the arguments given in the constructor
table. We were printing this extra argument out as well, which is a
mistake.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Jonathan Brassow [Fri, 4 Sep 2009 19:40:28 +0000 (20:40 +0100)]
dm log: fix userspace status output
Fix 'dmsetup table' output.
There is a missing ' ' at the end of the string causing two
words to run together.
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 4 Sep 2009 19:40:25 +0000 (20:40 +0100)]
dm stripe: expose correct io hints
Set sensible I/O hints for striped DM devices in the topology
infrastructure added for 2.6.31 for userspace tools to
obtain via sysfs.
Add .io_hints to 'struct target_type' to allow the I/O hints portion
(io_min and io_opt) of the 'struct queue_limits' to be set by each
target and implement this for dm-stripe.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 4 Sep 2009 19:40:24 +0000 (20:40 +0100)]
dm table: add more context to terse warning messages
A couple of recent warning messages make it difficult for the reader to
determine exactly what is wrong. This patch adds more information to
those messages.
The messages were added by these commits:
5dea271b6d87bd1d79a59c1d5baac2596a841c37 ("dm table: pass correct dev area size
to device_area_is_valid")
ea9df47cc92573b159ef3b4fda516c32cba9c4fd ("dm table: fix blk_stack_limits arg
to use bytes not sectors")
The patch also corrects references to logical_block_size in printk format
strings from %hu to %u.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mikulas Patocka [Fri, 4 Sep 2009 19:40:22 +0000 (20:40 +0100)]
dm table: fix queue_limit checking device iterator
The logic to check for valid device areas is inverted relative to proper
use with iterate_devices.
The iterate_devices method calls its callback for every underlying
device in the target. If any callback returns non-zero, iterate_devices
exits immediately. But the callback device_area_is_valid() returns 0 on
error and 1 on success. The overall effect without is that an error is
issued only if every device is invalid.
This patch renames device_area_is_valid to device_area_is_invalid and
inverts the logic so that one invalid device is sufficient to raise
an error.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Mike Snitzer [Fri, 4 Sep 2009 19:40:19 +0000 (20:40 +0100)]
dm snapshot: implement iterate devices
Implement the .iterate_devices for the origin and snapshot targets.
dm-snapshot's lack of .iterate_devices resulted in the inability to
properly establish queue_limits for both targets.
With 4K sector drives: an unfortunate side-effect of not establishing
proper limits in either targets' DM device was that IO to the devices
would fail even though both had been created without error.
Commit
af4874e03ed82f050d5872d8c39ce64bf16b5c38 ("dm target:s introduce
iterate devices fn") in 2.6.31-rc1 should have implemented .iterate_devices
for dm-snap.c's origin and snapshot targets.
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Kiyoshi Ueda [Fri, 4 Sep 2009 19:40:16 +0000 (20:40 +0100)]
dm multipath: fix oops when request based io fails when no paths
The patch posted at http://marc.info/?l=dm-devel&m=
124539787228784&w=2
which was merged into
cec47e3d4a861e1d942b3a580d0bbef2700d2bb2 ("dm:
prepare for request based option") introduced a regression in
request-based dm.
If map_request() calls dm_kill_unmapped_request() to complete a cloned
bio without dispatching it, clone->bio is still set when
dm_end_request() is called and the BUG_ON(clone->bio) is incorrect.
The patch fixes this bug by freeing bio in dm_end_request() if the clone
has bio. I've redone my tests to cover all I/O paths and confirmed
there's no other regression.
Here is the oops I hit in request-based dm when I do I/O to a multipath
device which doesn't have any active path nor queue_if_no_path setting:
------------[ cut here ]------------
kernel BUG at /root/2.6.31-rc4.rqdm/drivers/md/dm.c:828!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map
CPU 1
Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_service_time dm_multipath scsi_dh dm_mod video output sbs sbshc battery ac sg sr_mod e1000e button cdrom serio_raw rtc_cmos rtc_core rtc_lib piix lpfc scsi_transport_fc ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.31-rc4.rqdm #1 Express5800/120Lj [N8100-1417]
RIP: 0010:[<
ffffffffa023629d>] [<
ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
RSP: 0018:
ffff8800280a1f08 EFLAGS:
00010282
RAX:
ffffffffa02544e0 RBX:
ffff8802aa1111d0 RCX:
ffff8802aa1111e0
RDX:
ffff8802ab913e70 RSI:
0000000000000000 RDI:
ffff8802ab913e70
RBP:
ffff8800280a1f28 R08:
ffffc90005457040 R09:
0000000000000000
R10:
0000000000000001 R11:
0000000000000000 R12:
00000000fffffffb
R13:
ffff8802ab913e88 R14:
ffff8802ab9c1438 R15:
0000000000000100
FS:
0000000000000000(0000) GS:
ffff88002809e000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0:
000000008005003b
CR2:
0000003d54a98640 CR3:
000000029f0a1000 CR4:
00000000000006e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000ffff0ff0 DR7:
0000000000000400
Process ksoftirqd/1 (pid: 7, threadinfo
ffff8802ae50e000, task
ffff8802ae4f8040)
Stack:
ffff8800280a1f38 0000000000000020 ffffffff814f30a0 0000000000000004
<0>
ffff8800280a1f58 ffffffff8116b245 ffff8800280a1f38 ffff8800280a1f38
<0>
ffff8800280a1f58 0000000000000001 ffff8800280a1fa8 ffffffff810477bc
Call Trace:
<IRQ>
[<
ffffffff8116b245>] blk_done_softirq+0x75/0x90
[<
ffffffff810477bc>] __do_softirq+0xcc/0x210
[<
ffffffff81047170>] ? ksoftirqd+0x0/0x110
[<
ffffffff8100ce7c>] call_softirq+0x1c/0x50
<EOI>
[<
ffffffff8100e785>] do_softirq+0x65/0xa0
[<
ffffffff81047170>] ? ksoftirqd+0x0/0x110
[<
ffffffff810471e0>] ksoftirqd+0x70/0x110
[<
ffffffff81059559>] kthread+0x99/0xb0
[<
ffffffff8100cd7a>] child_rip+0xa/0x20
[<
ffffffff8100c73c>] ? restore_args+0x0/0x30
[<
ffffffff810594c0>] ? kthread+0x0/0xb0
[<
ffffffff8100cd70>] ? child_rip+0x0/0x20
Code: 44 89 e6 48 89 df e8 23 fb f2 e0 be 01 00 00 00 4c 89 f7 e8 f6 fd ff ff 5b 41 5c 41 5d 41 5e c9 c3 4c 89 ef e8 85 fe ff ff eb ed <0f> 0b eb fe 41 8b 85 dc 00 00 00 48 83 bb 10 01 00 00 00 89 83
RIP [<
ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod]
RSP <
ffff8800280a1f08>
---[ end trace
16af0a1d8542da55 ]---
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
David S. Miller [Fri, 4 Sep 2009 10:38:54 +0000 (03:38 -0700)]
sparc64: Fix bootup with mcount in some configs.
Functions invoked early when booting up a cpu can't use
tracing because mcount requires a valid 'current_thread_info()'
and TLB mappings to be setup.
The code path of sun4v_register_mondo_queues --> register_one_mondo
is one such case. sun4v_register_mondo_queues already has the
necessary 'notrace' annotation, but register_one_mondo does not.
Normally register_one_mondo is inlined so the bug doesn't trigger,
but with some config/compiler combinations, it won't be so we
must properly mark it notrace.
While we're here, add 'notrace' annoations to prom_printf and
prom_halt so that early error handling won't have the same problem.
Reported-by: Alexander Beregalov <a.beregalov@gmail.com>
Reported-by: Leif Sawyer <lsawyer@gci.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Andrews [Fri, 4 Sep 2009 00:21:27 +0000 (17:21 -0700)]
Input: atkbd - add Compaq Presario R4000-series repeat quirk
Compaq Presario R4000-series laptops are not sending a "volume up button
release" and "volume down button release" signal in the PS/2 protocol for
atkbd. The URL below has some of confirmed reports:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477
Signed-off-by: Dave Andrews <jetdog330@hotmail.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Eric Dumazet [Thu, 3 Sep 2009 19:38:59 +0000 (22:38 +0300)]
slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
kmem_cache_destroy() should call rcu_barrier() *after* kmem_cache_close() and
*before* sysfs_slab_remove() or risk rcu_free_slab() being called after
kmem_cache is deleted (kfreed).
rmmod nf_conntrack can crash the machine because it has to kmem_cache_destroy()
a SLAB_DESTROY_BY_RCU enabled cache.
Cc: <stable@kernel.org>
Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Massimo Cirillo [Thu, 27 Aug 2009 08:44:09 +0000 (10:44 +0200)]
JFFS2: add missing verify buffer allocation/deallocation
The function jffs2_nor_wbuf_flash_setup() doesn't allocate the verify buffer
if CONFIG_JFFS2_FS_WBUF_VERIFY is defined, so causing a kernel panic when
that macro is enabled and the verify function is called. Similarly the
jffs2_nor_wbuf_flash_cleanup() must free the buffer if
CONFIG_JFFS2_FS_WBUF_VERIFY is enabled.
The following patch fixes the problem.
The following patch applies to 2.6.30 kernel.
Signed-off-by: Massimo Cirillo <maxcir@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: stable@kernel.org
Dimitri Gorokhovik [Thu, 3 Sep 2009 13:04:22 +0000 (14:04 +0100)]
mtd: nftl: fix offset alignments
Arithmetic conversion in the mask computation makes the upper word
of the second argument passed down to mtd->read_oob(), be always 0
(assuming 'offs' being a 64-bit signed long long type, and
'mtd->writesize' being a 32-bit unsigned int type).
This patch applies over the other one adding masking in nftl_write,
"nftl: write support is broken".
Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: Scott James Remnant <scott@canonical.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Dimitri Gorokhovik [Thu, 3 Sep 2009 13:59:13 +0000 (14:59 +0100)]
mtd: nftl: write support is broken
Write support is broken in NFTL. Fix it.
Signed-off-by: <dimitri.gorokhovik@free.fr>
Cc: Tim Gardner <tim.gardner@canonical.com>
Cc: Scott James Remnant <scott@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>