Neeraj Sanjay Kale [Thu, 18 May 2023 16:43:47 +0000 (22:13 +0530)]
Bluetooth: btnxpuart: Fix compiler warnings
This fixes the follwing compiler warning reported by kernel test robot:
drivers/bluetooth/btnxpuart.c:1332:34: warning: unused variable
'nxpuart_of_match_table' [-Wunused-const-variable]
Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/oe-kbuild-all/202305161345.eClvTYQ9-lkp@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ruihan Li [Wed, 3 May 2023 13:39:37 +0000 (21:39 +0800)]
Bluetooth: Unlink CISes when LE disconnects in hci_conn_del
Currently, hci_conn_del calls hci_conn_unlink for BR/EDR, (e)SCO, and
CIS connections, i.e., everything except LE connections. However, if
(e)SCO connections are unlinked when BR/EDR disconnects, CIS connections
should also be unlinked when LE disconnects.
In terms of disconnection behavior, CIS and (e)SCO connections are not
too different. One peculiarity of CIS is that when CIS connections are
disconnected, the CIS handle isn't deleted, as per [BLUETOOTH CORE
SPECIFICATION Version 5.4 | Vol 4, Part E] 7.1.6 Disconnect command:
All SCO, eSCO, and CIS connections on a physical link should be
disconnected before the ACL connection on the same physical
connection is disconnected. If it does not, they will be
implicitly disconnected as part of the ACL disconnection.
...
Note: As specified in Section 7.7.5, on the Central, the handle
for a CIS remains valid even after disconnection and, therefore,
the Host can recreate a disconnected CIS at a later point in
time using the same connection handle.
Since hci_conn_link invokes both hci_conn_get and hci_conn_hold,
hci_conn_unlink should perform both hci_conn_put and hci_conn_drop as
well. However, currently it performs only hci_conn_put.
This patch makes hci_conn_unlink call hci_conn_drop as well, which
simplifies the logic in hci_conn_del a bit and may benefit future users
of hci_conn_unlink. But it is noted that this change additionally
implies that hci_conn_unlink can queue disc_work on conn itself, with
the following call stack:
hci_conn_unlink(conn) [conn->parent == NULL]
-> hci_conn_unlink(child) [child->parent == conn]
-> hci_conn_drop(child->parent)
-> queue_delayed_work(&conn->disc_work)
Queued disc_work after hci_conn_del can be spurious, so during the
process of hci_conn_del, it is necessary to make the call to
cancel_delayed_work(&conn->disc_work) after invoking hci_conn_unlink.
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ruihan Li [Wed, 3 May 2023 13:39:36 +0000 (21:39 +0800)]
Bluetooth: Fix UAF in hci_conn_hash_flush again
Commit
06149746e720 ("Bluetooth: hci_conn: Add support for linking
multiple hcon") reintroduced a previously fixed bug [1] ("KASAN:
slab-use-after-free Read in hci_conn_hash_flush"). This bug was
originally fixed by commit
5dc7d23e167e ("Bluetooth: hci_conn: Fix
possible UAF").
The hci_conn_unlink function was added to avoid invalidating the link
traversal caused by successive hci_conn_del operations releasing extra
connections. However, currently hci_conn_unlink itself also releases
extra connections, resulted in the reintroduced bug.
This patch follows a more robust solution for cleaning up all
connections, by repeatedly removing the first connection until there are
none left. This approach does not rely on the inner workings of
hci_conn_del and ensures proper cleanup of all connections.
Meanwhile, we need to make sure that hci_conn_del never fails. Indeed it
doesn't, as it now always returns zero. To make this a bit clearer, this
patch also changes its return type to void.
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/
000000000000aa920505f60d25ad@google.com/
Fixes:
06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Co-developed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ruihan Li [Wed, 3 May 2023 13:39:35 +0000 (21:39 +0800)]
Bluetooth: Refcnt drop must be placed last in hci_conn_unlink
If hci_conn_put(conn->parent) reduces conn->parent's reference count to
zero, it can immediately deallocate conn->parent. At the same time,
conn->link->list has its head in conn->parent, causing use-after-free
problems in the latter list_del_rcu(&conn->link->list).
This problem can be easily solved by reordering the two operations,
i.e., first performing the list removal with list_del_rcu and then
decreasing the refcnt with hci_conn_put.
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Closes: https://lore.kernel.org/linux-bluetooth/CABBYNZ+1kce8_RJrLNOXd_8=Mdpb=2bx4Nto-hFORk=qiOkoCg@mail.gmail.com/
Fixes:
06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Ruihan Li [Wed, 3 May 2023 13:39:34 +0000 (21:39 +0800)]
Bluetooth: Fix potential double free caused by hci_conn_unlink
The hci_conn_unlink function is being called by hci_conn_del, which
means it should not call hci_conn_del with the input parameter conn
again. If it does, conn may have already been released when
hci_conn_unlink returns, leading to potential UAF and double-free
issues.
This patch resolves the problem by modifying hci_conn_unlink to release
only conn's child links when necessary, but never release conn itself.
Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-bluetooth/
000000000000484a8205faafe216@google.com/
Fixes:
06149746e720 ("Bluetooth: hci_conn: Add support for linking multiple hcon")
Signed-off-by: Ruihan Li <lrh2000@pku.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Reported-by: syzbot+690b90b14f14f43f4688@syzkaller.appspotmail.com
Reported-by: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Reported-by: syzbot+8bb72f86fc823817bc5d@syzkaller.appspotmail.com
Shenwei Wang [Thu, 18 May 2023 15:02:02 +0000 (10:02 -0500)]
net: fec: add dma_wmb to ensure correct descriptor values
Two dma_wmb() are added in the XDP TX path to ensure proper ordering of
descriptor and buffer updates:
1. A dma_wmb() is added after updating the last BD to make sure
the updates to rest of the descriptor are visible before
transferring ownership to FEC.
2. A dma_wmb() is also added after updating the bdp to ensure these
updates are visible before updating txq->bd.cur.
3. Start the xmit of the frame immediately right after configuring the
tx descriptor.
Fixes:
6d6b39f180b8 ("net: fec: add initial XDP support")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Thu, 18 May 2023 15:41:46 +0000 (18:41 +0300)]
MAINTAINERS: add myself as maintainer for enetc
I would like to be copied on new patches submitted on this driver.
I am relatively familiar with the code, having practically maintained
it for a while.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sunil Goutham [Thu, 18 May 2023 06:40:42 +0000 (12:10 +0530)]
octeontx2-pf: Fix TSOv6 offload
HW adds segment size to the payload length
in the IPv6 header. Fix payload length to
just TCP header length instead of 'TCP header
size + IPv6 header size'.
Fixes:
86d7476078b8 ("octeontx2-pf: TCP segmentation offload support")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alejandro Lucero [Thu, 18 May 2023 05:48:22 +0000 (06:48 +0100)]
sfc: fix devlink info error handling
Avoid early devlink info return if errors arise with MCDI commands
executed for getting the required info from the device. The rationale
is some commands can fail but later ones could still give useful data.
Moreover, some nvram partitions could not be present which needs to be
handled as a non error.
The specific errors are reported through system messages and if any
error appears, it will be reported generically through extack.
Fixes
14743ddd2495 ("sfc: add devlink info support for ef100")
Signed-off-by: Alejandro Lucero <alejandro.lucero-palau@amd.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wen Gu [Thu, 18 May 2023 05:14:55 +0000 (13:14 +0800)]
net/smc: Reset connection when trying to use SMCRv2 fails.
We found a crash when using SMCRv2 with 2 Mellanox ConnectX-4. It
can be reproduced by:
- smc_run nginx
- smc_run wrk -t 32 -c 500 -d 30 http://<ip>:<port>
BUG: kernel NULL pointer dereference, address:
0000000000000014
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
8000000108713067 P4D
8000000108713067 PUD
151127067 PMD 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 4 PID: 2441 Comm: kworker/4:249 Kdump: loaded Tainted: G W E 6.4.0-rc1+ #42
Workqueue: smc_hs_wq smc_listen_work [smc]
RIP: 0010:smc_clc_send_confirm_accept+0x284/0x580 [smc]
RSP: 0018:
ffffb8294b2d7c78 EFLAGS:
00010a06
RAX:
ffff8f1873238880 RBX:
ffffb8294b2d7dc8 RCX:
0000000000000000
RDX:
00000000000000b4 RSI:
0000000000000001 RDI:
0000000000b40c00
RBP:
ffffb8294b2d7db8 R08:
ffff8f1815c5860c R09:
0000000000000000
R10:
0000000000000400 R11:
0000000000000000 R12:
ffff8f1846f56180
R13:
ffff8f1815c5860c R14:
0000000000000001 R15:
0000000000000001
FS:
0000000000000000(0000) GS:
ffff8f1aefd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000014 CR3:
00000001027a0001 CR4:
00000000003706e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
<TASK>
? mlx5_ib_map_mr_sg+0xa1/0xd0 [mlx5_ib]
? smcr_buf_map_link+0x24b/0x290 [smc]
? __smc_buf_create+0x4ee/0x9b0 [smc]
smc_clc_send_accept+0x4c/0xb0 [smc]
smc_listen_work+0x346/0x650 [smc]
? __schedule+0x279/0x820
process_one_work+0x1e5/0x3f0
worker_thread+0x4d/0x2f0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
During the CLC handshake, server sequentially tries available SMCRv2
and SMCRv1 devices in smc_listen_work().
If an SMCRv2 device is found. SMCv2 based link group and link will be
assigned to the connection. Then assumed that some buffer assignment
errors happen later in the CLC handshake, such as RMB registration
failure, server will give up SMCRv2 and try SMCRv1 device instead. But
the resources assigned to the connection won't be reset.
When server tries SMCRv1 device, the connection creation process will
be executed again. Since conn->lnk has been assigned when trying SMCRv2,
it will not be set to the correct SMCRv1 link in
smcr_lgr_conn_assign_link(). So in such situation, conn->lgr points to
correct SMCRv1 link group but conn->lnk points to the SMCRv2 link
mistakenly.
Then in smc_clc_send_confirm_accept(), conn->rmb_desc->mr[link->link_idx]
will be accessed. Since the link->link_idx is not correct, the related
MR may not have been initialized, so crash happens.
| Try SMCRv2 device first
| |-> conn->lgr: assign existed SMCRv2 link group;
| |-> conn->link: assign existed SMCRv2 link (link_idx may be 1 in SMC_LGR_SYMMETRIC);
| |-> sndbuf & RMB creation fails, quit;
|
| Try SMCRv1 device then
| |-> conn->lgr: create SMCRv1 link group and assign;
| |-> conn->link: keep SMCRv2 link mistakenly;
| |-> sndbuf & RMB creation succeed, only RMB->mr[link_idx = 0]
| initialized.
|
| Then smc_clc_send_confirm_accept() accesses
| conn->rmb_desc->mr[conn->link->link_idx, which is 1], then crash.
v
This patch tries to fix this by cleaning conn->lnk before assigning
link. In addition, it is better to reset the connection and clean the
resources assigned if trying SMCRv2 failed in buffer creation or
registration.
Fixes:
e49300a6bf62 ("net/smc: add listen processing for SMC-Rv2")
Link: https://lore.kernel.org/r/20220523055056.2078994-1-liuyacan@corp.netease.com/
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Po-Hsu Lin [Thu, 18 May 2023 04:37:59 +0000 (12:37 +0800)]
selftests: fib_tests: mute cleanup error message
In the end of the test, there will be an error message induced by the
`ip netns del ns1` command in cleanup()
Tests passed: 201
Tests failed: 0
Cannot remove namespace file "/run/netns/ns1": No such file or directory
This can even be reproduced with just `./fib_tests.sh -h` as we're
calling cleanup() on exit.
Redirect the error message to /dev/null to mute it.
V2: Update commit message and fixes tag.
V3: resubmit due to missing netdev ML in V2
Fixes:
b60417a9f2b8 ("selftest: fib_tests: Always cleanup before exit")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:59:35 +0000 (18:59 -0700)]
net/mlx5e: do as little as possible in napi poll when budget is 0
NAPI gets called with budget of 0 from netpoll, which has interrupts
disabled. We should try to free some space on Tx rings and nothing
else.
Specifically do not try to handle XDP TX or try to refill Rx buffers -
we can't use the page pool from IRQ context. Don't check if IRQs moved,
either, that makes no sense in netpoll. Netpoll calls _all_ the rings
from whatever CPU it happens to be invoked on.
In general do as little as possible, the work quickly adds up when
there's tens of rings to poll.
The immediate stack trace I was seeing is:
__do_softirq+0xd1/0x2c0
__local_bh_enable_ip+0xc7/0x120
</IRQ>
<TASK>
page_pool_put_defragged_page+0x267/0x320
mlx5e_free_xdpsq_desc+0x99/0xd0
mlx5e_poll_xdpsq_cq+0x138/0x3b0
mlx5e_napi_poll+0xc3/0x8b0
netpoll_poll_dev+0xce/0x150
AFAIU page pool takes a BH lock, releases it and since BH is now
enabled tries to run softirqs.
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Fixes:
60bbf7eeef10 ("mlx5: use page_pool for xdp_return_frame call")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 May 2023 07:37:37 +0000 (08:37 +0100)]
Merge branch 'tls-fixes'
Jakub Kicinski says:
====================
tls: rx: strp: fix inline crypto offload
The local strparser version I added to TLS does not preserve
decryption status, which breaks inline crypto (NIC offload).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:42 +0000 (18:50 -0700)]
tls: rx: strp: don't use GFP_KERNEL in softirq context
When receive buffer is small, or the TCP rx queue looks too
complicated to bother using it directly - we allocate a new
skb and copy data into it.
We already use sk->sk_allocation... but nothing actually
sets it to GFP_ATOMIC on the ->sk_data_ready() path.
Users of HW offload are far more likely to experience problems
due to scheduling while atomic. "Copy mode" is very rarely
triggered with SW crypto.
Fixes:
84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:41 +0000 (18:50 -0700)]
tls: rx: strp: preserve decryption status of skbs when needed
When receive buffer is small we try to copy out the data from
TCP into a skb maintained by TLS to prevent connection from
stalling. Unfortunately if a single record is made up of a mix
of decrypted and non-decrypted skbs combining them into a single
skb leads to loss of decryption status, resulting in decryption
errors or data corruption.
Similarly when trying to use TCP receive queue directly we need
to make sure that all the skbs within the record have the same
status. If we don't the mixed status will be detected correctly
but we'll CoW the anchor, again collapsing it into a single paged
skb without decrypted status preserved. So the "fixup" code will
not know which parts of skb to re-encrypt.
Fixes:
84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:40 +0000 (18:50 -0700)]
tls: rx: strp: factor out copying skb data
We'll need to copy input skbs individually in the next patch.
Factor that code out (without assuming we're copying a full record).
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:39 +0000 (18:50 -0700)]
tls: rx: strp: fix determining record length in copy mode
We call tls_rx_msg_size(skb) before doing skb->len += chunk.
So the tls_rx_msg_size() code will see old skb->len, most
likely leading to an over-read.
Worst case we will over read an entire record, next iteration
will try to trim the skb but may end up turning frag len negative
or discarding the subsequent record (since we already told TCP
we've read it during previous read but now we'll trim it out of
the skb).
Fixes:
84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:38 +0000 (18:50 -0700)]
tls: rx: strp: force mixed decrypted records into copy mode
If a record is partially decrypted we'll have to CoW it, anyway,
so go into copy mode and allocate a writable skb right away.
This will make subsequent fix simpler because we won't have to
teach tls_strp_msg_make_copy() how to copy skbs while preserving
decrypt status.
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:37 +0000 (18:50 -0700)]
tls: rx: strp: set the skb->len of detached / CoW'ed skbs
alloc_skb_with_frags() fills in page frag sizes but does not
set skb->len and skb->data_len. Set those correctly otherwise
device offload will most likely generate an empty skb and
hit the BUG() at the end of __skb_nsg().
Fixes:
84c61fe1a75b ("tls: rx: do not use the standard strparser")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Wed, 17 May 2023 01:50:36 +0000 (18:50 -0700)]
tls: rx: device: fix checking decryption status
skb->len covers the entire skb, including the frag_list.
In fact we're guaranteed that rxm->full_len <= skb->len,
so since the change under Fixes we were not checking decrypt
status of any skb but the first.
Note that the skb_pagelen() added here may feel a bit costly,
but it's removed by subsequent fixes, anyway.
Reported-by: Tariq Toukan <tariqt@nvidia.com>
Fixes:
86b259f6f888 ("tls: rx: device: bound the frag walk")
Tested-by: Shai Amiram <samiram@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tudor Ambarus [Wed, 17 May 2023 13:38:08 +0000 (13:38 +0000)]
net: cdc_ncm: Deal with too low values of dwNtbOutMaxSize
Currently in cdc_ncm_check_tx_max(), if dwNtbOutMaxSize is lower than
the calculated "min" value, but greater than zero, the logic sets
tx_max to dwNtbOutMaxSize. This is then used to allocate a new SKB in
cdc_ncm_fill_tx_frame() where all the data is handled.
For small values of dwNtbOutMaxSize the memory allocated during
alloc_skb(dwNtbOutMaxSize, GFP_ATOMIC) will have the same size, due to
how size is aligned at alloc time:
size = SKB_DATA_ALIGN(size);
size += SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
Thus we hit the same bug that we tried to squash with
commit
2be6d4d16a084 ("net: cdc_ncm: Allow for dwNtbOutMaxSize to be unset or zero")
Low values of dwNtbOutMaxSize do not cause an issue presently because at
alloc_skb() time more memory (512b) is allocated than required for the
SKB headers alone (320b), leaving some space (512b - 320b = 192b)
for CDC data (172b).
However, if more elements (for example 3 x u64 = [24b]) were added to
one of the SKB header structs, say 'struct skb_shared_info',
increasing its original size (320b [320b aligned]) to something larger
(344b [384b aligned]), then suddenly the CDC data (172b) no longer
fits in the spare SKB data area (512b - 384b = 128b).
Consequently the SKB bounds checking semantics fails and panics:
skbuff: skb_over_panic: text:
ffffffff831f755b len:184 put:172 head:
ffff88811f1c6c00 data:
ffff88811f1c6c00 tail:0xb8 end:0x80 dev:<NULL>
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:113!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 57 Comm: kworker/0:2 Not tainted 5.15.106-syzkaller-00249-g19c0ed55a470 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023
Workqueue: mld mld_ifc_work
RIP: 0010:skb_panic net/core/skbuff.c:113 [inline]
RIP: 0010:skb_over_panic+0x14c/0x150 net/core/skbuff.c:118
[snip]
Call Trace:
<TASK>
skb_put+0x151/0x210 net/core/skbuff.c:2047
skb_put_zero include/linux/skbuff.h:2422 [inline]
cdc_ncm_ndp16 drivers/net/usb/cdc_ncm.c:1131 [inline]
cdc_ncm_fill_tx_frame+0x11ab/0x3da0 drivers/net/usb/cdc_ncm.c:1308
cdc_ncm_tx_fixup+0xa3/0x100
Deal with too low values of dwNtbOutMaxSize, clamp it in the range
[USB_CDC_NCM_NTB_MIN_OUT_SIZE, CDC_NCM_NTB_MAX_SIZE_TX]. We ensure
enough data space is allocated to handle CDC data by making sure
dwNtbOutMaxSize is not smaller than USB_CDC_NCM_NTB_MIN_OUT_SIZE.
Fixes:
289507d3364f ("net: cdc_ncm: use sysfs for rx/tx aggregation tuning")
Cc: stable@vger.kernel.org
Reported-by: syzbot+9f575a1f15fc0c01ed69@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=b982f1059506db48409d
Link: https://lore.kernel.org/all/20211202143437.1411410-1-lee.jones@linaro.org/
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517133808.1873695-2-tudor.ambarus@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Thu, 18 May 2023 15:52:14 +0000 (08:52 -0700)]
Merge tag 'net-6.4-rc3' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from can, xfrm, bluetooth and netfilter.
Current release - regressions:
- ipv6: fix RCU splat in ipv6_route_seq_show()
- wifi: iwlwifi: disable RFI feature
Previous releases - regressions:
- tcp: fix possible sk_priority leak in tcp_v4_send_reset()
- tipc: do not update mtu if msg_max is too small in mtu negotiation
- netfilter: fix null deref on element insertion
- devlink: change per-devlink netdev notifier to static one
- phylink: fix ksettings_set() ethtool call
- wifi: mac80211: fortify the spinlock against deadlock by interrupt
- wifi: brcmfmac: check for probe() id argument being NULL
- eth: ice:
- fix undersized tx_flags variable
- fix ice VF reset during iavf initialization
- eth: hns3: fix sending pfc frames after reset issue
Previous releases - always broken:
- xfrm: release all offloaded policy memory
- nsh: use correct mac_offset to unwind gso skb in nsh_gso_segment()
- vsock: avoid to close connected socket after the timeout
- dsa: rzn1-a5psw: enable management frames for CPU port
- eth: virtio_net: fix error unwinding of XDP initialization
- eth: tun: fix memory leak for detached NAPI queue.
Misc:
- MAINTAINERS: sctp: move Neil to CREDITS"
* tag 'net-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits)
MAINTAINERS: skip CCing netdev for Bluetooth patches
mdio_bus: unhide mdio_bus_init prototype
bridge: always declare tunnel functions
atm: hide unused procfs functions
net: isa: include net/Space.h
Revert "ARM: dts: stm32: add CAN support on stm32f746"
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
net: wwan: t7xx: Ensure init is completed before system sleep
net: selftests: Fix optstring
net: pcs: xpcs: fix C73 AN not getting enabled
net: wwan: iosm: fix NULL pointer dereference when removing device
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
mailmap: add entries for Nikolay Aleksandrov
igb: fix bit_shift to be in [1..8] range
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
cassini: Fix a memory leak in the error handling path of cas_init_one()
tun: Fix memory leak for detached NAPI queue.
can: kvaser_pciefd: Disable interrupts in probe error path
...
Linus Torvalds [Thu, 18 May 2023 15:42:23 +0000 (08:42 -0700)]
Merge tag 'media/v6.4-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Several fixes for the dvb core and drivers:
- fix UAF and null pointer de-reference in DVB core
- fix kernel runtime warning for blocking operation in wait_event*()
in dvb core
- fix write size bug in DVB conditional access core
- fix dvb demux continuity counter debug check logic
- randconfig build fixes in pvrusb2 and mn88443x
- fix memory leak in ttusb-dec
- fix netup_unidvb probe-time error check logic
- improve error handling in dw2102 if it can't retrieve DVB MAC
address"
* tag 'media/v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dvb-core: Fix use-after-free due to race condition at dvb_ca_en50221
media: dvb-core: Fix kernel WARNING for blocking operation in wait_event*()
media: dvb-core: Fix use-after-free due to race at dvb_register_device()
media: dvb-core: Fix use-after-free due on race condition at dvb_net
media: dvb-core: Fix use-after-free on race condition at dvb_frontend
media: mn88443x: fix !CONFIG_OF error by drop of_match_ptr from ID table
media: ttusb-dec: fix memory leak in ttusb_dec_exit_dvb()
media: dvb_ca_en50221: fix a size write bug
media: netup_unidvb: fix irq init by register it at the end of probe
media: dvb-usb: dw2102: fix uninit-value in su3000_read_mac_address
media: dvb-usb: digitv: fix null-ptr-deref in digitv_i2c_xfer()
media: dvb-usb-v2: rtl28xxu: fix null-ptr-deref in rtl28xxu_i2c_xfer
media: dvb-usb-v2: ce6230: fix null-ptr-deref in ce6230_i2c_master_xfer()
media: dvb-usb-v2: ec168: fix null-ptr-deref in ec168_i2c_xfer()
media: dvb-usb: az6027: fix three null-ptr-deref in az6027_i2c_xfer()
media: netup_unidvb: fix use-after-free at del_timer()
media: dvb_demux: fix a bug for the continuity counter
media: pvrusb2: fix DVB_CORE dependency
Paolo Abeni [Thu, 18 May 2023 09:06:28 +0000 (11:06 +0200)]
Merge tag 'linux-can-fixes-for-6.4-
20230518' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-05-18
this is a pull request of 7 patches for net/master.
The first 6 patches are by Jimmy Assarsson and fix several bugs in the
kvaser_pciefd driver.
The latest patch is from me and reverts a change in stm32f746.dtsi
that causes build errors due to a missing dependent patch.
* tag 'linux-can-fixes-for-6.4-
20230518' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
Revert "ARM: dts: stm32: add CAN support on stm32f746"
can: kvaser_pciefd: Disable interrupts in probe error path
can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
can: kvaser_pciefd: Empty SRB buffer in probe
can: kvaser_pciefd: Call request_irq() before enabling interrupts
can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
====================
Link: https://lore.kernel.org/r/20230518073241.1110453-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jakub Kicinski [Thu, 18 May 2023 04:43:20 +0000 (21:43 -0700)]
Merge tag 'nf-23-05-17' of https://git./linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
Netfilter fixes for net
1. Silence warning about unused variable when CONFIG_NF_NAT=n, from Tom Rix.
2. nftables: Fix possible out-of-bounds access, from myself.
3. nftables: fix null deref+UAF during element insertion into rbtree,
also from myself.
* tag 'nf-23-05-17' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_set_rbtree: fix null deref on element insertion
netfilter: nf_tables: fix nft_trans type confusion
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
====================
Link: https://lore.kernel.org/r/20230517123756.7353-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 18 May 2023 04:36:21 +0000 (21:36 -0700)]
Merge tag 'wireless-2023-05-17' of git://git./linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.4
A lot of fixes this time, for both the stack and the drivers. The
brcmfmac resume fix has been reported by several people so I would say
it's the most important here. The iwlwifi RFI workaround is also
something which was reported as a regression recently.
* tag 'wireless-2023-05-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (31 commits)
wifi: b43: fix incorrect __packed annotation
wifi: rtw88: sdio: Always use two consecutive bytes for word operations
mac80211_hwsim: fix memory leak in hwsim_new_radio_nl
wifi: iwlwifi: mvm: Add locking to the rate read flow
wifi: iwlwifi: Don't use valid_links to iterate sta links
wifi: iwlwifi: mvm: don't trust firmware n_channels
wifi: iwlwifi: mvm: fix OEM's name in the tas approved list
wifi: iwlwifi: fix OEM's name in the ppag approved list
wifi: iwlwifi: mvm: fix initialization of a return value
wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id
wifi: iwlwifi: fw: fix DBGI dump
wifi: iwlwifi: mvm: fix number of concurrent link checks
wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock
wifi: iwlwifi: mvm: don't double-init spinlock
wifi: iwlwifi: mvm: always free dup_data
wifi: mac80211: recalc chanctx mindef before assigning
wifi: mac80211: consider reserved chanctx for mindef
wifi: mac80211: simplify chanctx allocation
wifi: mac80211: Abort running color change when stopping the AP
wifi: mac80211: fix min center freq offset tracing
...
====================
Link: https://lore.kernel.org/r/20230517151914.B0AF6C433EF@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 May 2023 01:42:53 +0000 (18:42 -0700)]
MAINTAINERS: skip CCing netdev for Bluetooth patches
As requested by Marcel skip netdev for Bluetooth patches.
Bluetooth has its own mailing list and overloading netdev
leads to fewer people reading it.
Link: https://lore.kernel.org/netdev/639C8EA4-1F6E-42BE-8F04-E4A753A6EFFC@holtmann.org/
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230517014253.1233333-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Tue, 16 May 2023 19:45:36 +0000 (21:45 +0200)]
mdio_bus: unhide mdio_bus_init prototype
mdio_bus_init() is either used as a local module_init() entry,
or it gets called in phy_device.c. In the former case, there
is no declaration, which causes a warning:
drivers/net/phy/mdio_bus.c:1371:12: error: no previous prototype for 'mdio_bus_init' [-Werror=missing-prototypes]
Remove the #ifdef around the declaration to avoid the warning..
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-4-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Tue, 16 May 2023 19:45:35 +0000 (21:45 +0200)]
bridge: always declare tunnel functions
When CONFIG_BRIDGE_VLAN_FILTERING is disabled, two functions are still
defined but have no prototype or caller. This causes a W=1 warning for
the missing prototypes:
net/bridge/br_netlink_tunnel.c:29:6: error: no previous prototype for 'vlan_tunid_inrange' [-Werror=missing-prototypes]
net/bridge/br_netlink_tunnel.c:199:5: error: no previous prototype for 'br_vlan_tunnel_info' [-Werror=missing-prototypes]
The functions are already contitional on CONFIG_BRIDGE_VLAN_FILTERING,
and I coulnd't easily figure out the right set of #ifdefs, so just
move the declarations out of the #ifdef to avoid the warning,
at a small cost in code size over a more elaborate fix.
Fixes:
188c67dd1906 ("net: bridge: vlan options: add support for tunnel id dumping")
Fixes:
569da0822808 ("net: bridge: vlan options: add support for tunnel mapping set/del")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20230516194625.549249-3-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Tue, 16 May 2023 19:45:34 +0000 (21:45 +0200)]
atm: hide unused procfs functions
When CONFIG_PROC_FS is disabled, the function declarations for some
procfs functions are hidden, but the definitions are still build,
as shown by this compiler warning:
net/atm/resources.c:403:7: error: no previous prototype for 'atm_dev_seq_start' [-Werror=missing-prototypes]
net/atm/resources.c:409:6: error: no previous prototype for 'atm_dev_seq_stop' [-Werror=missing-prototypes]
net/atm/resources.c:414:7: error: no previous prototype for 'atm_dev_seq_next' [-Werror=missing-prototypes]
Add another #ifdef to leave these out of the build.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-2-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arnd Bergmann [Tue, 16 May 2023 19:45:33 +0000 (21:45 +0200)]
net: isa: include net/Space.h
The legacy drivers that still get called from net/Space.c have prototypes
in net/Space, but this header is not included in most of the files that
define those functions:
drivers/net/ethernet/cirrus/cs89x0.c:1649:28: error: no previous prototype for 'cs89x0_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/ne.c:947:28: error: no previous prototype for 'ne_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/8390/smc-ultra.c:167:28: error: no previous prototype for 'ultra_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/amd/lance.c:438:28: error: no previous prototype for 'lance_probe' [-Werror=missing-prototypes]
drivers/net/ethernet/3com/3c515.c:422:20: error: no previous prototype for 'tc515_probe' [-Werror=missing-prototypes]
Add the inclusion to avoids the warnings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516194625.549249-1-arnd@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde [Wed, 17 May 2023 18:02:51 +0000 (20:02 +0200)]
Revert "ARM: dts: stm32: add CAN support on stm32f746"
This reverts commit
0920ccdf41e3078a4dd2567eb905ea154bc826e6.
The commit
0920ccdf41e3 ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".
So revert this commit.
[1] https://lore.kernel.org/all/
20230423172528.1398158-2-dario.binacchi@amarulasolutions.com
Cc: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202305172108.x5acbaQG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/
202305172130.eGGEUhpi-lkp@intel.com
Fixes:
0920ccdf41e3 ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/20230517181950.1106697-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Wed, 17 May 2023 18:16:36 +0000 (11:16 -0700)]
Merge tag 'linux-kselftest-fixes-6.4-rc3' of git://git./linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- sgx test fix for false negatives
- ftrace output is hard to parses and it masks inappropriate skips etc.
This fix addresses the problems by integrating with kselftest runner
* tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Improve integration with kselftest runner
selftests/sgx: Add "test_encl.elf" to TEST_FILES
Linus Torvalds [Wed, 17 May 2023 16:56:01 +0000 (09:56 -0700)]
Merge tag 'nfsd-6.4-1' of git://git./linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
Linus Torvalds [Wed, 17 May 2023 16:49:21 +0000 (09:49 -0700)]
Merge tag 'tpmdd-v6.4-rc2' of git://git./linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Three bug fixes for recently discovered issues"
* tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm/tpm_tis: Disable interrupts for more Lenovo devices
tpm: Prevent hwrng from activating during resume
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
Arnd Bergmann [Wed, 17 May 2023 12:47:12 +0000 (14:47 +0200)]
tracing: make ftrace_likely_update() declaration visible
This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and
DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden
behind this combination of tests.
But that causes a warning when building with CONFIG_TRACING_BRANCHES,
since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the
declaration is thus hidden:
kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes]
Move the declaration out of the #ifdef to avoid the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Florian Westphal [Thu, 11 May 2023 20:39:30 +0000 (22:39 +0200)]
netfilter: nft_set_rbtree: fix null deref on element insertion
There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
nft_add_set_elem+0x14b0/0x2990
nf_tables_newsetelem+0x528/0xb30
Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.
Fixes:
c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <fw@strlen.de>
Florian Westphal [Thu, 11 May 2023 12:15:15 +0000 (14:15 +0200)]
netfilter: nf_tables: fix nft_trans type confusion
nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.
Check for rule type first. Found by code inspection.
Fixes:
1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <fw@strlen.de>
Tom Rix [Sun, 14 May 2023 14:00:10 +0000 (10:00 -0400)]
netfilter: conntrack: define variables exp_nat_nla_policy and any_addr with CONFIG_NF_NAT
gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
| ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
‘any_addr’ defined but not used [-Werror=unused-const-variable=]
2979 | static const union nf_inet_addr any_addr;
| ^~~~~~~~
These variables use is controlled by CONFIG_NF_NAT, so should their definitions.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Kai-Heng Feng [Wed, 17 May 2023 05:24:51 +0000 (13:24 +0800)]
net: wwan: t7xx: Ensure init is completed before system sleep
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Benjamin Poirier [Tue, 16 May 2023 18:49:24 +0000 (14:49 -0400)]
net: selftests: Fix optstring
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes:
5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean [Tue, 16 May 2023 15:44:10 +0000 (18:44 +0300)]
net: pcs: xpcs: fix C73 AN not getting enabled
The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.
Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.
Fixes:
11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/ZGNt2MFeRolKGFck@shell.armlinux.org.uk/
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
M Chetan Kumar [Tue, 16 May 2023 15:39:46 +0000 (21:09 +0530)]
net: wwan: iosm: fix NULL pointer dereference when removing device
In suspend and resume cycle, the removal and rescan of device ends
up in NULL pointer dereference.
During driver initialization, if the ipc_imem_wwan_channel_init()
fails to get the valid device capabilities it returns an error and
further no resource (wwan struct) will be allocated. Now in this
situation if driver removal procedure is initiated it would result
in NULL pointer exception since unallocated wwan struct is dereferenced
inside ipc_wwan_deinit().
ipc_imem_run_state_worker() to handle the called functions return value
and to release the resource in failure case. It also reports the link
down event in failure cases. The user space application can handle this
event to do a device reset for restoring the device communication.
Fixes:
3670970dd8c6 ("net: iosm: shared memory IPC interface")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Closes: https://lore.kernel.org/netdev/
20230427140819.
1310f4bd@kernel.org/T/
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Tue, 16 May 2023 14:23:42 +0000 (14:23 +0000)]
vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit()
syzbot triggered the following splat [1], sending an empty message
through pppoe_sendmsg().
When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header()
does not push extra bytes for the VLAN header, because vlan is offloaded.
Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto
before testing (vlan->flags & VLAN_FLAG_REORDER_HDR).
We need to swap the two conditions.
[1]
BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111
__netdev_start_xmit include/linux/netdevice.h:4883 [inline]
netdev_start_xmit include/linux/netdevice.h:4897 [inline]
xmit_one net/core/dev.c:3580 [inline]
dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596
__dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246
dev_queue_xmit include/linux/netdevice.h:3053 [inline]
pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Uninit was created at:
slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774
slab_alloc_node mm/slub.c:3452 [inline]
kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497
kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520
__alloc_skb+0x3a7/0x850 net/core/skbuff.c:606
alloc_skb include/linux/skbuff.h:1277 [inline]
sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583
pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg net/socket.c:747 [inline]
____sys_sendmsg+0xa24/0xe40 net/socket.c:2501
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555
__sys_sendmmsg+0x411/0xa50 net/socket.c:2641
__do_sys_sendmmsg net/socket.c:2670 [inline]
__se_sys_sendmmsg net/socket.c:2667 [inline]
__x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nikolay Aleksandrov [Tue, 16 May 2023 08:48:49 +0000 (11:48 +0300)]
mailmap: add entries for Nikolay Aleksandrov
Turns out I missed a few patches due to use of old addresses by
senders. Add a mailmap entry with my old addresses.
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Aleksandr Loktionov [Tue, 16 May 2023 17:41:46 +0000 (10:41 -0700)]
igb: fix bit_shift to be in [1..8] range
In igb_hash_mc_addr() the expression:
"mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]"
shift by more than 7 bits always yields zero, so hash becomes not so different.
Add initialization with bit_shift = 1 and add a loop condition to ensure
bit_shift will be always in [1..8] range.
Fixes:
9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver")
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 17 May 2023 08:19:23 +0000 (09:19 +0100)]
Merge branch '100GbE' of git://git./linux/kernel/git/tnguy/net-queue
Tony nguyen says:
====================
Intel Wired LAN Driver Updates 2023-05-16
This series contains updates to ice and iavf drivers.
Ahmed adds setting of missed condition for statistics which caused
incorrect reporting of values for ice. For iavf, he removes a call to set
VLAN offloads during re-initialization which can cause incorrect values
to be set.
Dawid adds checks to ensure VF is ready to be reset before executing
commands that will require it to be reset on ice.
---
v2:
Patch 2
- Redo commit message
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marco Migliore [Tue, 16 May 2023 07:38:54 +0000 (09:38 +0200)]
net: dsa: mv88e6xxx: Fix mv88e6393x EPC write command offset
According to datasheet, the command opcode must be specified
into bits [14:12] of the Extended Port Control register (EPC).
Fixes:
de776d0d316f ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marco Migliore <m.migliore@tiesse.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christophe JAILLET [Mon, 15 May 2023 19:09:11 +0000 (21:09 +0200)]
cassini: Fix a memory leak in the error handling path of cas_init_one()
cas_saturn_firmware_init() allocates some memory using vmalloc(). This
memory is freed in the .remove() function but not it the error handling
path of the probe.
Add the missing vfree() to avoid a memory leak, should an error occur.
Fixes:
fcaa40669cd7 ("cassini: use request_firmware")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kuniyuki Iwashima [Mon, 15 May 2023 18:42:04 +0000 (11:42 -0700)]
tun: Fix memory leak for detached NAPI queue.
syzkaller reported [0] memory leaks of sk and skb related to the TUN
device with no repro, but we can reproduce it easily with:
struct ifreq ifr = {}
int fd_tun, fd_tmp;
char buf[4] = {};
fd_tun = openat(AT_FDCWD, "/dev/net/tun", O_WRONLY, 0);
ifr.ifr_flags = IFF_TUN | IFF_NAPI | IFF_MULTI_QUEUE;
ioctl(fd_tun, TUNSETIFF, &ifr);
ifr.ifr_flags = IFF_DETACH_QUEUE;
ioctl(fd_tun, TUNSETQUEUE, &ifr);
fd_tmp = socket(AF_PACKET, SOCK_PACKET, 0);
ifr.ifr_flags = IFF_UP;
ioctl(fd_tmp, SIOCSIFFLAGS, &ifr);
write(fd_tun, buf, sizeof(buf));
close(fd_tun);
If we enable NAPI and multi-queue on a TUN device, we can put skb into
tfile->sk.sk_write_queue after the queue is detached. We should prevent
it by checking tfile->detached before queuing skb.
Note this must be done under tfile->sk.sk_write_queue.lock because write()
and ioctl(IFF_DETACH_QUEUE) can run concurrently. Otherwise, there would
be a small race window:
write() ioctl(IFF_DETACH_QUEUE)
`- tun_get_user `- __tun_detach
|- if (tfile->detached) |- tun_disable_queue
| `-> false | `- tfile->detached = tun
| `- tun_queue_purge
|- spin_lock_bh(&queue->lock)
`- __skb_queue_tail(queue, skb)
Another solution is to call tun_queue_purge() when closing and
reattaching the detached queue, but it could paper over another
problems. Also, we do the same kind of test for IFF_NAPI_FRAGS.
[0]:
unreferenced object 0xffff88801edbc800 (size 2048):
comm "syz-executor.1", pid 33269, jiffies
4295743834 (age 18.756s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............
backtrace:
[<
000000008c16ea3d>] __do_kmalloc_node mm/slab_common.c:965 [inline]
[<
000000008c16ea3d>] __kmalloc+0x4a/0x130 mm/slab_common.c:979
[<
000000003addde56>] kmalloc include/linux/slab.h:563 [inline]
[<
000000003addde56>] sk_prot_alloc+0xef/0x1b0 net/core/sock.c:2035
[<
000000003e20621f>] sk_alloc+0x36/0x2f0 net/core/sock.c:2088
[<
0000000028e43843>] tun_chr_open+0x3d/0x190 drivers/net/tun.c:3438
[<
000000001b0f1f28>] misc_open+0x1a6/0x1f0 drivers/char/misc.c:165
[<
000000004376f706>] chrdev_open+0x111/0x300 fs/char_dev.c:414
[<
00000000614d379f>] do_dentry_open+0x2f9/0x750 fs/open.c:920
[<
000000008eb24774>] do_open fs/namei.c:3636 [inline]
[<
000000008eb24774>] path_openat+0x143f/0x1a30 fs/namei.c:3791
[<
00000000955077b5>] do_filp_open+0xce/0x1c0 fs/namei.c:3818
[<
00000000b78973b0>] do_sys_openat2+0xf0/0x260 fs/open.c:1356
[<
00000000057be699>] do_sys_open fs/open.c:1372 [inline]
[<
00000000057be699>] __do_sys_openat fs/open.c:1388 [inline]
[<
00000000057be699>] __se_sys_openat fs/open.c:1383 [inline]
[<
00000000057be699>] __x64_sys_openat+0x83/0xf0 fs/open.c:1383
[<
00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<
00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<
000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
unreferenced object 0xffff88802f671700 (size 240):
comm "syz-executor.1", pid 33269, jiffies
4295743854 (age 18.736s)
hex dump (first 32 bytes):
68 c9 db 1e 80 88 ff ff 68 c9 db 1e 80 88 ff ff h.......h.......
00 c0 7b 2f 80 88 ff ff 00 c8 db 1e 80 88 ff ff ..{/............
backtrace:
[<
00000000e9d9fdb6>] __alloc_skb+0x223/0x250 net/core/skbuff.c:644
[<
000000002c3e4e0b>] alloc_skb include/linux/skbuff.h:1288 [inline]
[<
000000002c3e4e0b>] alloc_skb_with_frags+0x6f/0x350 net/core/skbuff.c:6378
[<
00000000825f98d7>] sock_alloc_send_pskb+0x3ac/0x3e0 net/core/sock.c:2729
[<
00000000e9eb3df3>] tun_alloc_skb drivers/net/tun.c:1529 [inline]
[<
00000000e9eb3df3>] tun_get_user+0x5e1/0x1f90 drivers/net/tun.c:1841
[<
0000000053096912>] tun_chr_write_iter+0xac/0x120 drivers/net/tun.c:2035
[<
00000000b9282ae0>] call_write_iter include/linux/fs.h:1868 [inline]
[<
00000000b9282ae0>] new_sync_write fs/read_write.c:491 [inline]
[<
00000000b9282ae0>] vfs_write+0x40f/0x530 fs/read_write.c:584
[<
00000000524566e4>] ksys_write+0xa1/0x170 fs/read_write.c:637
[<
00000000a7d2182d>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
[<
00000000a7d2182d>] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80
[<
000000004cc4e8c4>] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fixes:
cde8b15f1aab ("tuntap: add ioctl to attach or detach a file form tuntap device")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Marc Kleine-Budde [Wed, 17 May 2023 07:02:43 +0000 (09:02 +0200)]
Merge patch series "can: kvaser_pciefd: Bug fixes"
Jimmy Assarsson <extja@kvaser.com> says:
This patch series contains various bug fixes for the kvaser_pciefd
driver.
Link: https://lore.kernel.org/r/20230516134318.104279-1-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:18 +0000 (15:43 +0200)]
can: kvaser_pciefd: Disable interrupts in probe error path
Disable interrupts in error path of probe function.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:17 +0000 (15:43 +0200)]
can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt
Under certain circumstances we send two EFLUSH commands, resulting in two
EFLUSH ack packets, while only expecting a single EFLUSH ack.
This can cause the driver Tx flush completion to get out of sync.
To avoid this problem, don't enable the "Transmit buffer flush done" (TFD)
interrupt and remove the code handling it.
Now we only send EFLUSH command after receiving status packet with
"Init detected" (IDET) bit set.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:16 +0000 (15:43 +0200)]
can: kvaser_pciefd: Empty SRB buffer in probe
Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a
known state, and don't process any irrelevant packets.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:15 +0000 (15:43 +0200)]
can: kvaser_pciefd: Call request_irq() before enabling interrupts
Make sure the interrupt handler is registered before enabling interrupts.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:14 +0000 (15:43 +0200)]
can: kvaser_pciefd: Clear listen-only bit if not explicitly requested
The listen-only bit was never cleared, causing the controller to
always use listen-only mode, if previously set.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Jimmy Assarsson [Tue, 16 May 2023 13:43:13 +0000 (15:43 +0200)]
can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop()
Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop().
Without this fix, wrong CAN state was repported after the interface was
brought down.
Fixes:
26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices")
Cc: stable@vger.kernel.org
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Arnd Bergmann [Tue, 16 May 2023 18:34:22 +0000 (20:34 +0200)]
wifi: b43: fix incorrect __packed annotation
clang warns about an unpacked structure inside of a packed one:
drivers/net/wireless/broadcom/b43/b43.h:654:4: error: field data within 'struct b43_iv' is less aligned than 'union (unnamed union at /home/arnd/arm-soc/drivers/net/wireless/broadcom/b43/b43.h:651:2)' and is usually due to 'struct b43_iv' being packed, which can lead to unaligned accesses [-Werror,-Wunaligned-access]
The problem here is that the anonymous union has the default alignment
from its members, apparently because the original author mixed up the
placement of the __packed attribute by placing it next to the struct
member rather than the union definition. As the struct itself is
also marked as __packed, there is no need to mark its members, so just
move the annotation to the inner type instead.
As Michael noted, the same problem is present in b43legacy, so
change both at the same time.
Acked-by: Michael Büsch <m@bues.ch>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/oe-kbuild-all/202305160749.ay1HAoyP-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230516183442.536589-1-arnd@kernel.org
Martin Blumenstingl [Mon, 15 May 2023 19:50:43 +0000 (21:50 +0200)]
wifi: rtw88: sdio: Always use two consecutive bytes for word operations
The Allwinner sunxi-mmc controller cannot handle word (16 bit)
transfers. So and sdio_{read,write}w fails with messages like the
following example using an RTL8822BS (but the same problems were also
observed with RTL8822CS and RTL8723DS chips):
rtw_8822bs mmc1:0001:1: Firmware version 27.2.0, H2C version 13
sunxi-mmc 4021000.mmc: unaligned scatterlist: os f80 length 2
sunxi-mmc 4021000.mmc: map DMA failed
rtw_8822bs mmc1:0001:1: sdio read16 failed (0x10230): -22
Use two consecutive single byte accesses for word operations instead. It
turns out that upon closer inspection this is also what the vendor
driver does, even though it does have support for sdio_{read,write}w. So
we can conclude that the rtw88 chips do support word access but only on
SDIO controllers that also support it. Since there's no way to detect if
the controller supports word access or not the rtw88 sdio driver
switches to the easiest approach: avoiding word access.
Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Closes: https://lore.kernel.org/linux-wireless/
527585e5-9cdd-66ed-c3af-
6da162f4b720@lwfinger.net/
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/LibreELEC/LibreELEC.tv/pull/7837#issue-1708469467
Fixes:
65371a3f14e7 ("wifi: rtw88: sdio: Add HCI implementation for SDIO based chipsets")
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230515195043.572375-1-martin.blumenstingl@googlemail.com
Jakub Kicinski [Wed, 17 May 2023 03:52:34 +0000 (20:52 -0700)]
Merge tag 'ipsec-2023-05-16' of git://git./linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2023-05-16
1) Don't check the policy default if we have an allow
policy. Fix from Sabrina Dubroca.
2) Fix netdevice refount usage on offload.
From Leon Romanovsky.
3) Use netdev_put instead of dev_puti to correctly release
the netdev on failure in xfrm_dev_policy_add.
From Leon Romanovsky.
4) Revert "Fix XFRM-I support for nested ESP tunnels"
This broke Netfilter policy matching.
From Martin Willi.
5) Reject optional tunnel/BEET mode templates in outbound policies
on netlink and pfkey sockets. From Tobias Brunner.
6) Check if_id in inbound policy/secpath match to make
it symetric to the outbound codepath.
From Benedict Wong.
* tag 'ipsec-2023-05-16' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Check if_id in inbound policy/secpath match
af_key: Reject optional tunnel/BEET mode templates in outbound policies
xfrm: Reject optional tunnel/BEET mode templates in outbound policies
Revert "Fix XFRM-I support for nested ESP tunnels"
xfrm: Fix leak of dev tracker
xfrm: release all offloaded policy memory
xfrm: don't check the default policy if the policy allows the packet
====================
Link: https://lore.kernel.org/r/20230516052405.2677554-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 17 May 2023 03:49:42 +0000 (20:49 -0700)]
Merge tag 'linux-can-fixes-for-6.4-
20230515' of git://git./linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2023-05-15
The first 2 patches are by Oliver Hartkopp and allow the
MSG_CMSG_COMPAT flag for isotp and j1939.
The next patch is by Oliver Hartkopp, too and adds missing CAN XL
support in can_put_echo_skb().
Geert Uytterhoeven's patch let's the bxcan driver depend on
ARCH_STM32.
The last 5 patches are from Dario Binacchi and also affect the bxcan
driver. The bxcan driver hit mainline with v6.4-rc1 and was originally
written for IP cores containing 2 CAN interfaces with shared
resources. Dario's series updates the DT bindings and driver to
support IP cores with a single CAN interface instance as well as
adding the bxcan to the stm32f746's device tree.
* tag 'linux-can-fixes-for-6.4-
20230515' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
ARM: dts: stm32: add CAN support on stm32f746
can: bxcan: add support for single peripheral configuration
ARM: dts: stm32: add pin map for CAN controller on stm32f7
ARM: dts: stm32f429: put can2 in secondary mode
dt-bindings: net: can: add "st,can-secondary" property
can: CAN_BXCAN should depend on ARCH_STM32
can: dev: fix missing CAN XL support in can_put_echo_skb()
can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
can: isotp: recvmsg(): allow MSG_CMSG_COMPAT flag
====================
Link: https://lore.kernel.org/r/20230515204722.1000957-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel [Mon, 15 May 2023 16:29:25 +0000 (19:29 +0300)]
devlink: Fix crash with CONFIG_NET_NS=n
'__net_initdata' becomes a no-op with CONFIG_NET_NS=y, but when this
option is disabled it becomes '__initdata', which means the data can be
freed after the initialization phase. This annotation is obviously
incorrect for the devlink net device notifier block which is still
registered after the initialization phase [1].
Fix this crash by removing the '__net_initdata' annotation.
[1]
general protection fault, probably for non-canonical address 0xcccccccccccccccc: 0000 [#1] PREEMPT SMP
CPU: 3 PID: 117 Comm: (udev-worker) Not tainted 6.4.0-rc1-custom-gdf0acdc59b09 #64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-1.fc37 04/01/2014
RIP: 0010:notifier_call_chain+0x58/0xc0
[...]
Call Trace:
<TASK>
dev_set_mac_address+0x85/0x120
dev_set_mac_address_user+0x30/0x50
do_setlink+0x219/0x1270
rtnl_setlink+0xf7/0x1a0
rtnetlink_rcv_msg+0x142/0x390
netlink_rcv_skb+0x58/0x100
netlink_unicast+0x188/0x270
netlink_sendmsg+0x214/0x470
__sys_sendto+0x12f/0x1a0
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x38/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes:
e93c9378e33f ("devlink: change per-devlink netdev notifier to static one")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Closes: https://lore.kernel.org/netdev/
600ddf9e-589a-2aa0-7b69-
a438f833ca10@samsung.com/
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230515162925.1144416-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Zhengchao Shao [Mon, 15 May 2023 09:22:27 +0000 (17:22 +0800)]
mac80211_hwsim: fix memory leak in hwsim_new_radio_nl
When parse_pmsr_capa failed in hwsim_new_radio_nl, the memory resources
applied for by pmsr_capa are not released. Add release processing to the
incorrect path.
Fixes:
92d13386ec55 ("mac80211_hwsim: add PMSR capability support")
Reported-by: syzbot+904ce6fbb38532d9795c@syzkaller.appspotmail.com
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230515092227.2691437-1-shaozhengchao@huawei.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ariel Malamud [Sun, 14 May 2023 09:15:55 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: Add locking to the rate read flow
The rs_drv_get_rate flow reads the lq_sta to return the optimal rate
for tx frames. This read flow is not protected thereby leaving
a small window, a few instructions wide, open to contention by an
asynchronous rate update. Indeed this race condition was hit and the
update occurred in the middle of the read.
Fix this by locking the lq_sta struct during read.
Signed-off-by: Ariel Malamud <ariel.malamud@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b52c9ed5c379.I15290b78e0d966c1b68278263776ca9de841d5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Miri Korenblit [Sun, 14 May 2023 09:15:54 +0000 (12:15 +0300)]
wifi: iwlwifi: Don't use valid_links to iterate sta links
This bitmap equals to zero when in a non-MLO mode, and then we won't
be iterating on any link. Use for_each_sta_active_link() instead, as
it handles also the case of non-MLO mode.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.f32a8c08730a.Ib02248cd0b7f2bc885f91005c3c110dd027f9dcd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:53 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: don't trust firmware n_channels
If the firmware sends us a corrupted MCC response with
n_channels much larger than the command response can be,
we might copy far too much (uninitialized) memory and
even crash if the n_channels is large enough to make it
run out of the one page allocated for the FW response.
Fix that by checking the lengths. Doing a < comparison
would be sufficient, but the firmware should be doing
it correctly, so check more strictly.
Fixes:
dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alon Giladi [Sun, 14 May 2023 09:15:52 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: fix OEM's name in the tas approved list
Fix a spelling mistake.
Fixes:
2856f623ce48 ("iwlwifi: mvm: Add list of OEMs allowed to use TAS")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.4090de6d1878.If9391ef6da78f1b2cc5eb6cb8f6965816bb7a7f5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Alon Giladi [Sun, 14 May 2023 09:15:51 +0000 (12:15 +0300)]
wifi: iwlwifi: fix OEM's name in the ppag approved list
Fix a spelling mistake.
Fixes:
e8e10a37c51c ("iwlwifi: acpi: move ppag code from mvm to fw/acpi")
Signed-off-by: Alon Giladi <alon.giladi@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.fdd07f36a8bf.I223e5fb16ab5c95d504c3fdaffd0bd70affad1c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mukesh Sisodiya [Sun, 14 May 2023 09:15:50 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: fix initialization of a return value
In iwl_mvm_mld_update_sta(), if the flow doesn't enter
for_each_sta_active_link(), the default value is returned.
Set this default to -EINVAL instead of 0 to better reflect
this.
Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.98b7e3aacf0b.I2fc274dd7e374ef7fac8e26d71c9cd73323da665@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Gregory Greenman [Sun, 14 May 2023 09:15:49 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: fix access to fw_id_to_mac_id
RCU protected fw_id_to_mac_id can be initialized with either
an error code or NULL. Thus, after dereferencing need to check
the value with IS_ERR_OR_NULL() and not only that it is not NULL.
Fix it.
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.ec5f2880e81c.Ifa8c0f451df2835bde800f5c3670cc46238a3bd8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:48 +0000 (12:15 +0300)]
wifi: iwlwifi: fw: fix DBGI dump
The DBGI dump is (unsurprisingly) of type DBGI, not SRAM.
This leads to bad register accesses because the union is
built differently, there's no allocation ID, and thus the
allocation ID ends up being 0x8000.
Note that this was already wrong for DRAM vs. SMEM since
they use different parts of the union, but the allocation
ID is at the same place, so it worked.
Fix all of this but set the allocation ID in a way that
the offset calculation ends up without any offset.
Fixes:
34bc27783a31 ("iwlwifi: yoyo: fix DBGI_SRAM ini dump header.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.19a302ae4c65.I12272599f7c1930666157b9d5e7f81fe9ec4c421@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:47 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: fix number of concurrent link checks
The concurrent link checks need to correctly differentiate
between AP and non-AP, fix that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.992b2f981ef6.I7d386c19354e9be39c4822f436dd22c93422b660@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:46 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: fix cancel_delayed_work_sync() deadlock
Lockdep points out that we can deadlock here by calling
cancel_delayed_work_sync() because that might be already
running and gotten interrupted by the NAPI soft-IRQ.
Even just calling something that can sleep is wrong in
this context though.
Luckily, it doesn't even really matter since the things
we need to do are idempotent, so just drop the _sync().
Fixes:
e5d153ec54f0 ("iwlwifi: mvm: fix CSA AP side")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.b1813c823b4d.I9d20cc06d24fa40b6774d3dd95ea5e2bf8dd015b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:45 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: don't double-init spinlock
We don't need to (and shouldn't) initialize the spinlock
during HW restart that was already initialized, so move
that into the correct if block. Since then we have two
consecutive if statements with the same (though inverted)
condition, unify those as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.221c22cfdf4e.I2e30113ef4bd8cb5bd9e1a69e52a95671914961c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Sun, 14 May 2023 09:15:44 +0000 (12:15 +0300)]
wifi: iwlwifi: mvm: always free dup_data
There are some assertions in the STA removal code that can
fail, and in that case we may leak memory since we skip
the freeing.
Fix this by freeing the dup_data earlier in the function,
we already have a check for when we free the station, and
this we don't need to do it with and without MLD API, so
it's a win all around.
Fixes:
a571f5f635ef ("iwlwifi: mvm: add duplicate packet detection per rx queue")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230514120631.173938681d72.Iff4b55fc52943825d6e3e28d78a24b155ea5cd22@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 4 May 2023 13:45:04 +0000 (16:45 +0300)]
wifi: mac80211: recalc chanctx mindef before assigning
When we allocate a new channel context, or find an existing one
that is compatible, we currently assign it to a link before its
mindef is updated. This leads to strange situations, especially
in link switching where you switch to an 80 MHz link and expect
it to be active immediately, but the mindef is still configured
to 20 MHz while assigning. Also, it's strange that the chandef
passed to the assign method's argument is wider than the one in
the context.
Fix this by calculating the mindef with the new link considered
before calling the driver.
In particular, this fixes an iwlwifi problem during link switch
where the firmware would assert because the (link) station that
was added for the AP is configured to transmit at a bandwidth
that's wider than the channel context that it's configured on.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-5-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 4 May 2023 13:45:03 +0000 (16:45 +0300)]
wifi: mac80211: consider reserved chanctx for mindef
When a chanctx is reserved for a new vif and we recalculate
the minimal definition for it, we need to consider the new
interface it's being reserved for before we assign it, so it
can be used directly with the correct min channel width.
Fix the code to - optionally - consider that, and use that
option just before doing the reassignment.
Also, when considering channel context reservations, we
should only consider the one link we're currently working with.
Change the boolean argument to a link pointer to do that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-4-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 4 May 2023 13:45:02 +0000 (16:45 +0300)]
wifi: mac80211: simplify chanctx allocation
There's no need to call ieee80211_recalc_chanctx_min_def()
since it cannot and won't call the driver anyway; just use
_ieee80211_recalc_chanctx_min_def() instead.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-3-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Michael Lee [Thu, 4 May 2023 08:04:41 +0000 (16:04 +0800)]
wifi: mac80211: Abort running color change when stopping the AP
When stopping the AP, there might be a color change in progress. It
should be deactivated here, or the driver might later finalize a color
change on a stopped AP.
Fixes:
5f9404abdf2a (mac80211: add support for BSS color change)
Signed-off-by: Michael Lee <michael-cy.lee@mediatek.com>
Link: https://lore.kernel.org/r/20230504080441.22958-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg [Thu, 4 May 2023 13:45:01 +0000 (16:45 +0300)]
wifi: mac80211: fix min center freq offset tracing
We need to set the correct trace variable, otherwise we're
overwriting something else instead and the right one that
we print later is not initialized.
Fixes:
b6011960f392 ("mac80211: handle channel frequency offset")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230504134511.828474-2-gregory.greenman@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Gregory Greenman [Sun, 30 Apr 2023 17:18:30 +0000 (20:18 +0300)]
wifi: iwlwifi: mvm: rfi: disable RFI feature
This feature depends on a platform bugfix. Until we have a
mechanism that can verify a platform has the required bugfix,
disable RFI.
Fixes:
ef3ed33dfc8f ("wifi: iwlwifi: bump FW API to 77 for AX devices")
Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Link: https://lore.kernel.org/linux-wireless/CAAJw_ZvZdFpw9W2Hisc9c2BAFbYAnQuaFFaFG6N7qPUP2fOL_w@mail.gmail.com/
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Christophe JAILLET [Mon, 24 Apr 2023 17:42:04 +0000 (19:42 +0200)]
wifi: mac80211: Fix puncturing bitmap handling in __ieee80211_csa_finalize()
'changed' can be OR'ed with BSS_CHANGED_EHT_PUNCTURING which is larger than
an u32.
So, turn 'changed' into an u64 and update ieee80211_set_after_csa_beacon()
accordingly.
In the commit in Fixes, only ieee80211_start_ap() was updated.
Fixes:
2cc25e4b2a04 ("wifi: mac80211: configure puncturing bitmap")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/e84a3f80fe536787f7a2c7180507efc36cd14f95.1682358088.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mirsad Goran Todorovac [Tue, 25 Apr 2023 16:40:08 +0000 (18:40 +0200)]
wifi: mac80211: fortify the spinlock against deadlock by interrupt
In the function ieee80211_tx_dequeue() there is a particular locking
sequence:
begin:
spin_lock(&local->queue_stop_reason_lock);
q_stopped = local->queue_stop_reasons[q];
spin_unlock(&local->queue_stop_reason_lock);
However small the chance (increased by ftracetest), an asynchronous
interrupt can occur in between of spin_lock() and spin_unlock(),
and the interrupt routine will attempt to lock the same
&local->queue_stop_reason_lock again.
This will cause a costly reset of the CPU and the wifi device or an
altogether hang in the single CPU and single core scenario.
The only remaining spin_lock(&local->queue_stop_reason_lock) that
did not disable interrupts was patched, which should prevent any
deadlocks on the same CPU/core and the same wifi device.
This is the probable trace of the deadlock:
kernel: ================================
kernel: WARNING: inconsistent lock state
kernel: 6.3.0-rc6-mt-
20230401-00001-gf86822a1170f #4 Tainted: G W
kernel: --------------------------------
kernel: inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kernel: kworker/5:0/25656 [HC0[0]:SC0[0]:HE1:SE1] takes:
kernel:
ffff9d6190779478 (&local->queue_stop_reason_lock){+.?.}-{2:2}, at: return_to_handler+0x0/0x40
kernel: {IN-SOFTIRQ-W} state was registered at:
kernel: lock_acquire+0xc7/0x2d0
kernel: _raw_spin_lock+0x36/0x50
kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel: iwl_mvm_mac_wake_tx_queue+0x2d/0xd0 [iwlmvm]
kernel: ieee80211_queue_skb+0x450/0x730 [mac80211]
kernel: __ieee80211_xmit_fast.constprop.66+0x834/0xa50 [mac80211]
kernel: __ieee80211_subif_start_xmit+0x217/0x530 [mac80211]
kernel: ieee80211_subif_start_xmit+0x60/0x580 [mac80211]
kernel: dev_hard_start_xmit+0xb5/0x260
kernel: __dev_queue_xmit+0xdbe/0x1200
kernel: neigh_resolve_output+0x166/0x260
kernel: ip_finish_output2+0x216/0xb80
kernel: __ip_finish_output+0x2a4/0x4d0
kernel: ip_finish_output+0x2d/0xd0
kernel: ip_output+0x82/0x2b0
kernel: ip_local_out+0xec/0x110
kernel: igmpv3_sendpack+0x5c/0x90
kernel: igmp_ifc_timer_expire+0x26e/0x4e0
kernel: call_timer_fn+0xa5/0x230
kernel: run_timer_softirq+0x27f/0x550
kernel: __do_softirq+0xb4/0x3a4
kernel: irq_exit_rcu+0x9b/0xc0
kernel: sysvec_apic_timer_interrupt+0x80/0xa0
kernel: asm_sysvec_apic_timer_interrupt+0x1f/0x30
kernel: _raw_spin_unlock_irqrestore+0x3f/0x70
kernel: free_to_partial_list+0x3d6/0x590
kernel: __slab_free+0x1b7/0x310
kernel: kmem_cache_free+0x52d/0x550
kernel: putname+0x5d/0x70
kernel: do_sys_openat2+0x1d7/0x310
kernel: do_sys_open+0x51/0x80
kernel: __x64_sys_openat+0x24/0x30
kernel: do_syscall_64+0x5c/0x90
kernel: entry_SYSCALL_64_after_hwframe+0x72/0xdc
kernel: irq event stamp: 5120729
kernel: hardirqs last enabled at (5120729): [<
ffffffff9d149936>] trace_graph_return+0xd6/0x120
kernel: hardirqs last disabled at (5120728): [<
ffffffff9d149950>] trace_graph_return+0xf0/0x120
kernel: softirqs last enabled at (5069900): [<
ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel: softirqs last disabled at (5067555): [<
ffffffff9cf65b60>] return_to_handler+0x0/0x40
kernel:
other info that might help us debug this:
kernel: Possible unsafe locking scenario:
kernel: CPU0
kernel: ----
kernel: lock(&local->queue_stop_reason_lock);
kernel: <Interrupt>
kernel: lock(&local->queue_stop_reason_lock);
kernel:
*** DEADLOCK ***
kernel: 8 locks held by kworker/5:0/25656:
kernel: #0:
ffff9d618009d138 ((wq_completion)events_freezable){+.+.}-{0:0}, at: process_one_work+0x1ca/0x530
kernel: #1:
ffffb1ef4637fe68 ((work_completion)(&local->restart_work)){+.+.}-{0:0}, at: process_one_work+0x1ce/0x530
kernel: #2:
ffffffff9f166548 (rtnl_mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #3:
ffff9d6190778728 (&rdev->wiphy.mtx){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #4:
ffff9d619077b480 (&mvm->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #5:
ffff9d61907bacd8 (&trans_pcie->mutex){+.+.}-{3:3}, at: return_to_handler+0x0/0x40
kernel: #6:
ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_queue_state_change+0x59/0x3a0 [iwlmvm]
kernel: #7:
ffffffff9ef9cda0 (rcu_read_lock){....}-{1:2}, at: iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel:
stack backtrace:
kernel: CPU: 5 PID: 25656 Comm: kworker/5:0 Tainted: G W 6.3.0-rc6-mt-
20230401-00001-gf86822a1170f #4
kernel: Hardware name: LENOVO 82H8/LNVNB161216, BIOS GGCN51WW 11/16/2022
kernel: Workqueue: events_freezable ieee80211_restart_work [mac80211]
kernel: Call Trace:
kernel: <TASK>
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: dump_stack_lvl+0x5f/0xa0
kernel: dump_stack+0x14/0x20
kernel: print_usage_bug.part.46+0x208/0x2a0
kernel: mark_lock.part.47+0x605/0x630
kernel: ? sched_clock+0xd/0x20
kernel: ? trace_clock_local+0x14/0x30
kernel: ? __rb_reserve_next+0x5f/0x490
kernel: ? _raw_spin_lock+0x1b/0x50
kernel: __lock_acquire+0x464/0x1990
kernel: ? mark_held_locks+0x4e/0x80
kernel: lock_acquire+0xc7/0x2d0
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ? ftrace_return_to_handler+0x8b/0x100
kernel: ? preempt_count_add+0x4/0x70
kernel: _raw_spin_lock+0x36/0x50
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_tx_dequeue+0xb4/0x1330 [mac80211]
kernel: ? prepare_ftrace_return+0xc5/0x190
kernel: ? ftrace_graph_func+0x16/0x20
kernel: ? 0xffffffffc02ab0b1
kernel: ? lock_acquire+0xc7/0x2d0
kernel: ? iwl_mvm_mac_itxq_xmit+0x42/0x210 [iwlmvm]
kernel: ? ieee80211_tx_dequeue+0x9/0x1330 [mac80211]
kernel: ? __rcu_read_lock+0x4/0x40
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_mac_itxq_xmit+0xae/0x210 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_queue_state_change+0x311/0x3a0 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_wake_sw_queue+0x17/0x20 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_unmap+0x1c9/0x1f0 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_free+0x55/0x130 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_txq_gen2_tx_free+0x63/0x80 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: _iwl_trans_pcie_gen2_stop_device+0x3f3/0x5b0 [iwlwifi]
kernel: ? _iwl_trans_pcie_gen2_stop_device+0x9/0x5b0 [iwlwifi]
kernel: ? mutex_lock_nested+0x4/0x30
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_trans_pcie_gen2_stop_device+0x5f/0x90 [iwlwifi]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_stop_device+0x78/0xd0 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: __iwl_mvm_mac_start+0x114/0x210 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: iwl_mvm_mac_start+0x76/0x150 [iwlmvm]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: drv_start+0x79/0x180 [mac80211]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_reconfig+0x1523/0x1ce0 [mac80211]
kernel: ? synchronize_net+0x4/0x50
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: ieee80211_restart_work+0x108/0x170 [mac80211]
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: process_one_work+0x250/0x530
kernel: ? ftrace_regs_caller_end+0x66/0x66
kernel: worker_thread+0x48/0x3a0
kernel: ? __pfx_worker_thread+0x10/0x10
kernel: kthread+0x10f/0x140
kernel: ? __pfx_kthread+0x10/0x10
kernel: ret_from_fork+0x29/0x50
kernel: </TASK>
Fixes:
4444bc2116ae ("wifi: mac80211: Proper mark iTXQs for resumption")
Link: https://lore.kernel.org/all/1f58a0d1-d2b9-d851-73c3-93fcc607501c@alu.unizg.hr/
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/all/cdc80531-f25f-6f9d-b15f-25e16130b53a@alu.unizg.hr/
Cc: David S. Miller <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Alexander Wetzel <alexander@wetzel-home.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: tag, or it goes automatically?
Link: https://lore.kernel.org/r/20230425164005.25272-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan Peer [Mon, 24 Apr 2023 07:32:24 +0000 (10:32 +0300)]
wifi: cfg80211: Drop entries with invalid BSSIDs in RNR
Ignore AP information for entries that include an invalid
BSSID in the TBTT information field, e.g., all zeros BSSIDs.
Fixes:
c8cb5b854b40 ("nl80211/cfg80211: support 6 GHz scanning")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Gregory Greenman <gregory.greenman@intel.com>
Link: https://lore.kernel.org/r/20230424103224.5e65d04d1448.Ic10c8577ae4a85272c407106c9d0a2ecb5372743@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ahmed Zaki [Mon, 17 Apr 2023 18:09:39 +0000 (12:09 -0600)]
iavf: send VLAN offloading caps once after VFR
When the user disables rxvlan offloading and then changes the number of
channels, all VLAN ports are unable to receive traffic.
Changing the number of channels triggers a VFR reset. During re-init, when
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is received, we do:
1 - set the IAVF_FLAG_SETUP_NETDEV_FEATURES flag
2 - call
iavf_set_vlan_offload_features(adapter, 0, netdev->features);
The second step sends to the PF the __default__ features, in this case
aq_required |= IAVF_FLAG_AQ_ENABLE_CTAG_VLAN_STRIPPING
While the first step forces the watchdog task to call
netdev_update_features() -> iavf_set_features() ->
iavf_set_vlan_offload_features(adapter, netdev->features, features).
Since the user disabled the "rxvlan", this sets:
aq_required |= IAVF_FLAG_AQ_DISABLE_CTAG_VLAN_STRIPPING
When we start processing the AQ commands, both flags are enabled. Since we
process DISABLE_XTAG first then ENABLE_XTAG, this results in the PF
enabling the rxvlan offload. This breaks all communications on the VLAN
net devices.
Fix by removing the call to iavf_set_vlan_offload_features() (second
step). Calling netdev_update_features() from watchdog task is enough for
both init and reset paths.
Fixes:
7598f4b40bd6 ("iavf: Move netdev_update_features() into watchdog task")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Dawid Wesierski [Tue, 18 Apr 2023 09:52:55 +0000 (11:52 +0200)]
ice: Fix ice VF reset during iavf initialization
Fix the current implementation that causes ice_trigger_vf_reset()
to start resetting the VF even when the VF-NIC is still initializing.
When we reset NIC with ice driver it can interfere with
iavf-vf initialization e.g. during consecutive resets induced by ice
iavf ice
| |
|<-----------------|
| ice resets vf
iavf |
reset |
start |
|<-----------------|
| ice resets vf
| causing iavf
| initialization
| error
| |
iavf
reset
end
This leads to a series of -53 errors
(failed to init adminq) from the IAVF.
Change the state of the vf_state field to be not active when the IAVF
is still initializing. Make sure to wait until receiving the message on
the message box to ensure that the vf is ready and initializded.
In simple terms we use the ACTIVE flag to make sure that the ice
driver knows if the iavf is ready for another reset
iavf ice
| |
| |
|<------------- ice resets vf
iavf vf_state != ACTIVE
reset |
start |
| |
| |
iavf |
reset-------> vf_state == ACTIVE
end ice resets vf
| |
| |
Fixes:
c54d209c78b8 ("ice: Wait for VF to be reset/ready before configuration")
Signed-off-by: Dawid Wesierski <dawidx.wesierski@intel.com>
Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com>
Acked-by: Jacob Keller <Jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Ahmed Zaki [Mon, 17 Apr 2023 23:44:45 +0000 (17:44 -0600)]
ice: Fix stats after PF reset
After a core PF reset, the VFs were showing wrong Rx/Tx stats. This is a
regression in commit
6624e780a577 ("ice: split ice_vsi_setup into smaller
functions") caused by missing to set "stat_offsets_loaded = false" in the
ice_vsi_rebuild() path.
Fixes:
6624e780a577 ("ice: split ice_vsi_setup into smaller functions")
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Florian Fainelli [Mon, 15 May 2023 02:56:07 +0000 (19:56 -0700)]
net: bcmgenet: Restore phy_stop() depending upon suspend/close
Removing the phy_stop() from bcmgenet_netif_stop() ended up causing
warnings from the PHY library that phy_start() is called from the
RUNNING state since we are no longer stopping the PHY state machine
during bcmgenet_suspend().
Restore the call to phy_stop() but make it conditional on being called
from the close or suspend path.
Fixes:
c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine")
Fixes:
93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jerry Snitselaar [Thu, 11 May 2023 00:54:03 +0000 (17:54 -0700)]
tpm/tpm_tis: Disable interrupts for more Lenovo devices
The P360 Tiny suffers from an irq storm issue like the T490s, so add
an entry for it to tpm_tis_dmi_table, and force polling. There also
previously was a report from the previous attempt to enable interrupts
that involved a ThinkPad L490. So an entry is added for it as well.
Cc: stable@vger.kernel.org
Reported-by: Peter Zijlstra <peterz@infradead.org> # P360 Tiny
Closes: https://lore.kernel.org/linux-integrity/
20230505130731.GO83892@hirez.programming.kicks-ass.net/
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Jarkko Sakkinen [Wed, 26 Apr 2023 17:29:28 +0000 (20:29 +0300)]
tpm: Prevent hwrng from activating during resume
Set TPM_CHIP_FLAG_SUSPENDED in tpm_pm_suspend() and reset in
tpm_pm_resume(). While the flag is set, tpm_hwrng() gives back zero
bytes. This prevents hwrng from racing during resume.
Cc: stable@vger.kernel.org
Fixes:
6e592a065d51 ("tpm: Move Linux RNG connection to hwrng")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Jarkko Sakkinen [Wed, 26 Apr 2023 17:29:27 +0000 (20:29 +0300)]
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
Before sending a TPM command, CLKRUN protocol must be disabled. This is not
done in the case of tpm1_do_selftest() call site inside tpm_tis_resume().
Address this by decorating the calls with tpm_chip_{start,stop}, which
should be always used to arm and disarm the TPM chip for transmission.
Finally, move the call to the main TPM driver callback as the last step
because it should arm the chip by itself, if it needs that type of
functionality.
Cc: stable@vger.kernel.org
Reported-by: Jason A. Donenfeld <Jason@zx2c4.com>
Closes: https://lore.kernel.org/linux-integrity/CS68AWILHXS4.3M36M1EKZLUMS@suppilovahvero/
Fixes:
a3fbfae82b4c ("tpm: take TPM chip power gating out of tpm_transmit()")
Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Marc Kleine-Budde [Mon, 15 May 2023 20:26:39 +0000 (22:26 +0200)]
Merge patch series "can: bxcan: add support for single peripheral configuration"
Dario Binacchi <dario.binacchi@amarulasolutions.com> says:
The series adds support for managing bxCAN controllers in single peripheral
configuration.
Unlike stm32f4 SOCs, where bxCAN controllers are only in dual peripheral
configuration, stm32f7 SOCs contain three CAN peripherals, CAN1 and CAN2
in dual peripheral configuration and CAN3 in single peripheral
configuration:
- Dual CAN peripheral configuration:
* CAN1: Primary bxCAN for managing the communication between a secondary
bxCAN and the 512-byte SRAM memory.
* CAN2: Secondary bxCAN with no direct access to the SRAM memory.
This means that the two bxCAN cells share the 512-byte SRAM memory and
CAN2 can't be used without enabling CAN1.
- Single CAN peripheral configuration:
* CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
512-byte SRAM memory.
The driver has been tested on the stm32f769i-discovery board with a
kernel version 5.19.0-rc2 in loopback + silent mode:
| ip link set can[0-2] type can bitrate 125000 loopback on listen-only on
| ip link set up can[0-2]
| candump can[0-2] -L &
| cansend can[0-2] 300#AC.AB.AD.AE.75.49.AD.D1
Changes in v2:
- s/fiter/filter/ in the commit message
- Replace struct bxcan_mb::primary with struct bxcan_mb::cfg.
- Move after the patch "can: bxcan: add support for single peripheral configuration".
- Add node gcan3.
- Rename gcan as gcan1.
- Add property "st,can-secondary" to can2 node.
- Drop patch "dt-bindings: mfd: stm32f7: add binding definition for CAN3"
because it has been accepted.
- Add patch "ARM: dts: stm32f429: put can2 in secondary mode".
- Add patch "dt-bindings: net: can: add "st,can-secondary" property".
v1: https://lore.kernel.org/all/
20230423172528.1398158-1-dario.binacchi@amarulasolutions.com
Link: https://lore.kernel.org/all/20230427204540.3126234-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dario Binacchi [Thu, 27 Apr 2023 20:45:40 +0000 (22:45 +0200)]
ARM: dts: stm32: add CAN support on stm32f746
Add support for bxcan (Basic eXtended CAN controller) to STM32F746. The
chip contains three CAN peripherals, CAN1 and CAN2 in dual peripheral
configuration and CAN3 in single peripheral configuration:
- Dual CAN peripheral configuration:
* CAN1: Primary bxCAN for managing the communication between a secondary
bxCAN and the 512-byte SRAM memory.
* CAN2: Secondary bxCAN with no direct access to the SRAM memory.
This means that the two bxCAN cells share the 512-byte SRAM memory and
CAN2 can't be used without enabling CAN1.
- Single CAN peripheral configuration:
* CAN3: Primary bxCAN with dedicated Memory Access Controller unit and
512-byte SRAM memory.
-------------------------------------------------------------------------
| features | CAN1 | CAN2 | CAN 3 |
-------------------------------------------------------------------------
| SRAM | 512-byte shared between CAN1 & CAN2 | 512-byte |
-------------------------------------------------------------------------
| Filters | 26 filters shared between CAN1 & CAN2 | 14 filters |
-------------------------------------------------------------------------
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-6-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dario Binacchi [Thu, 27 Apr 2023 20:45:39 +0000 (22:45 +0200)]
can: bxcan: add support for single peripheral configuration
Add support for bxCAN controller in single peripheral configuration:
- primary bxCAN
- dedicated Memory Access Controller unit
- 512-byte SRAM memory
- 14 filter banks
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-5-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dario Binacchi [Thu, 27 Apr 2023 20:45:38 +0000 (22:45 +0200)]
ARM: dts: stm32: add pin map for CAN controller on stm32f7
Add pin configurations for using CAN controller on stm32f7.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dario Binacchi [Thu, 27 Apr 2023 20:45:37 +0000 (22:45 +0200)]
ARM: dts: stm32f429: put can2 in secondary mode
This is a preparation patch for the upcoming support to manage CAN
peripherals in single configuration.
The addition ensures backwards compatibility.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/all/20230427204540.3126234-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Dario Binacchi [Thu, 27 Apr 2023 20:45:36 +0000 (22:45 +0200)]
dt-bindings: net: can: add "st,can-secondary" property
On the stm32f7 Socs the can peripheral can be in single or dual
configuration. In the dual configuration, in turn, it can be in primary
or secondary mode. The addition of the 'st,can-secondary' property allows
you to specify this mode in the dual configuration.
CAN peripheral nodes in single configuration contain neither
"st,can-primary" nor "st,can-secondary".
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/all/20230427204540.3126234-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Geert Uytterhoeven [Tue, 4 Apr 2023 11:59:00 +0000 (13:59 +0200)]
can: CAN_BXCAN should depend on ARCH_STM32
The STMicroelectronics STM32 basic extended CAN Controller (bxCAN) is
only present on STM32 SoCs. Hence drop the "|| OF" part from its
dependency rule, to prevent asking the user about this driver when
configuring a kernel without STM32 SoC support.
Fixes:
f00647d8127be4d3 ("can: bxcan: add support for ST bxCAN controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/40095112efd1b2214e4223109fd9f0c6d0158a2d.1680609318.git.geert+renesas@glider.be
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Sat, 6 May 2023 18:45:15 +0000 (20:45 +0200)]
can: dev: fix missing CAN XL support in can_put_echo_skb()
can_put_echo_skb() checks for the enabled IFF_ECHO flag and the
correct ETH_P type of the given skbuff. When implementing the CAN XL
support the new check for ETH_P_CANXL has been forgotten.
Fixes:
fb08cba12b52 ("can: canxl: update CAN infrastructure for CAN XL frames")
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/all/20230506184515.39241-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Oliver Hartkopp [Thu, 6 Apr 2023 11:08:45 +0000 (13:08 +0200)]
can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag
The control message provided by J1939 support MSG_CMSG_COMPAT but
blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user
space on 64 bit kernels.
Link: https://github.com/hartkopp/can-isotp/issues/59
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Suggested-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Fixes:
9d71dd0c7009 ("can: add support of SAE J1939 protocol")
Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>