phy: ti: j721e-wiz: Delete "clk_div_sel" clk provider during cleanup

[ Upstream commit 7e52a39f1942b771213678c56002ce90a2f126d2 ]

commit 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module
present in TI J721E SoC") modeled both MUX clocks and DIVIDER clocks in
wiz. However during cleanup, it removed only the MUX clock provider.
Remove the DIVIDER clock provider here.

Fixes: 091876cc355d ("phy: ti: j721e-wiz: Add support for WIZ module present in TI J721E SoC")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20210310120840.16447-3-kishon@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soundwire: bus: Fix device found flag correctly

[ Upstream commit f03690f4f6992225d05dbd1171212e5be5a370dd ]

found flag is used to indicate SoundWire devices that are
both enumerated on the bus and available in the device list.
However this flag is not reset correctly after one iteration,
This could miss some of the devices that are enumerated on the
bus but not in device list. So reset this correctly to fix this issue!

Fixes: d52d7a1be02c ("soundwire: Add Slave status handling helpers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210309104816.20350-1-srinivas.kandagatla@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: qcom: Put child node before return

[ Upstream commit ac6ad7c2a862d682bb584a4bc904d89fa7721af8 ]

Put child node before return to fix potential reference count leak.
Generally, the reference count of child is incremented and decremented
automatically in the macro for_each_available_child_of_node() and should
be decremented manually if the loop is broken in loop body.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes: 335a12754808 ("bus: qcom: add EBI2 driver")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Link: https://lore.kernel.org/r/20210121114907.109267-1-bianpan2016@163.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a779a0: Fix PMU interrupt

[ Upstream commit bbbf6db5a0b56199702bb225132831bced2eee41 ]

Should use PPI No.7 for the PMU. Otherwise, the perf command didn't
show any information.

Fixes: 834c310f5418 ("arm64: dts: renesas: Add Renesas R8A779A0 SoC support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210325041949.925777-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: require write permissions for locking and badblock ioctls

[ Upstream commit 1e97743fd180981bef5f01402342bb54bf1c6366 ]

MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require
write permission. Depending on the hardware MEMLOCK might even be
write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK
is always write-once.

MEMSETBADBLOCK modifies the bad block table.

Fixes: f7e6b19bc764 ("mtd: properly check all write ioctls for permissions")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210303155735.25887-1-michael@walle.cc
Signed-off-by: Sasha Levin <sashal@kernel.org>

dt-bindings: serial: stm32: Use 'type: object' instead of false for 'additionalProperties'

[ Upstream commit 9f299d3264c67a892af87337dbaa0bdd20830c0c ]

To use additional properties 'bluetooth' on serial, need replace false with
'type: object' for 'additionalProperties' to make it as a node, else will
run into dtbs_check warnings.

'arch/arm/boot/dts/stm32h750i-art-pi.dt.yaml: serial@40004800:
'bluetooth' does not match any of the regexes: 'pinctrl-[0-9]+'

Fixes: af1c2d81695b ("dt-bindings: serial: Convert STM32 UART to json-schema")
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: dillon min <dillon.minfei@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1616757302-7889-8-git-send-email-dillon.minfei@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: s3c: Fix the error handling path in 's3c2410_udc_probe()'

[ Upstream commit e5242861ec6a0bce25b4cd10af0fc8a508fd067d ]

Some 'clk_prepare_enable()' and 'clk_get()' must be undone in the error
handling path of the probe function, as already done in the remove
function.

Fixes: 3fc154b6b813 ("USB Gadget driver for Samsung s3c2410 ARM SoC")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/2bee52e4ce968f48b4c32545cf8f3b2ab825ba82.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: s3c: Fix incorrect resources releasing

[ Upstream commit 42067ccd9eb2077979ac3ce8b7b95c694bd09e14 ]

Since commit 188db4435ac6 ("usb: gadget: s3c: use platform resources"),
'request_mem_region()' and 'ioremap()' are no more used, so they don't need
to be undone in the error handling path of the probe and in the remove
function.

Remove these calls and the unneeded 'rsrc_start' and 'rsrc_len' global
variables.

Fixes: 188db4435ac6 ("usb: gadget: s3c: use platform resources")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/b317638464f188159bd8eea44427dd359e480625.1616830026.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Complete OUT requests on short packets

[ Upstream commit 75bb93be0027123b5db6cbcce89eb62f0f6b3c5b ]

A short packet indicates the end of a transfer and marks the request as
complete.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-8-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Don't DMA more than the buffer can take

[ Upstream commit 3e7c2510bdfe89a9ec223dd7acd6bfc8bb1cbeb6 ]

Before this, it wrote as much as available into the buffer, even if it
didn't fit.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-7-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Mask GRP2 interrupts we don't handle

[ Upstream commit 9aee3a23d6455200702f3a57e731fa11e8408667 ]

Currently it leaves unhandled interrupts unmasked, but those are never
acked. In the case of a "device idle" interrupt, this leads to an
effectively frozen system until plugging it in.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-5-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Remove a dubious condition leading to fotg210_done

[ Upstream commit c7f755b243494d6043aadcd9a2989cb157958b95 ]

When the EP0 IN request was not completed but less than a packet sent,
it would complete the request successfully. That doesn't make sense
and can't really happen as fotg210_start_dma always sends
min(length, maxpkt) bytes.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-4-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix EP0 IN requests bigger than two packets

[ Upstream commit 078ba935651e149c92c41161e0322e3372cc2705 ]

For a 134 Byte packet, it sends the first two 64 Byte packets just fine,
but then notice that less than a packet is remaining and call fotg210_done
without actually sending the rest.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-3-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fotg210-udc: Fix DMA on EP0 for length > max packet size

[ Upstream commit 755915fc28edfc608fa89a163014acb2f31c1e19 ]

For a 75 Byte request, it would send the first 64 separately, then detect
that the remaining 11 Byte fit into a single DMA, but due to this bug set
the length to the original 75 Bytes. This leads to a DMA failure (which is
ignored...) and the request completes without the remaining bytes having
been sent.

Fixes: b84a8dee23fd ("usb: gadget: add Faraday fotg210_udc driver")
Signed-off-by: Fabian Vogt <fabian@ritter-vogt.de>
Link: https://lore.kernel.org/r/20210324141115.9384-2-fabian@ritter-vogt.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - ADF_STATUS_PF_RUNNING should be set after adf_dev_init

[ Upstream commit 8609f5cfdc872fc3a462efa6a3eca5cb1e2f6446 ]

ADF_STATUS_PF_RUNNING is (only) used and checked by adf_vf2pf_shutdown()
before calling adf_iov_putmsg()->mutex_lock(vf2pf_lock), however the
vf2pf_lock is initialized in adf_dev_init(), which can fail and when it
fail, the vf2pf_lock is either not initialized or destroyed, a subsequent
use of vf2pf_lock will cause issue.
To fix this issue, only set this flag if adf_dev_init() returns 0.

[    7.178404] BUG: KASAN: user-memory-access in __mutex_lock.isra.0+0x1ac/0x7c0
[    7.180345] Call Trace:
[    7.182576]  mutex_lock+0xc9/0xd0
[    7.183257]  adf_iov_putmsg+0x118/0x1a0 [intel_qat]
[    7.183541]  adf_vf2pf_shutdown+0x4d/0x7b [intel_qat]
[    7.183834]  adf_dev_shutdown+0x172/0x2b0 [intel_qat]
[    7.184127]  adf_probe+0x5e9/0x600 [qat_dh895xccvf]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: 25c6ffb249f6 ("crypto: qat - check if PF is running")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: qat - don't release uninitialized resources

[ Upstream commit b66accaab3791e15ac99c92f236d0d3a6d5bd64e ]

adf_vf_isr_resource_alloc() is not unwinding correctly when error
happens and it want to release uninitialized resources.
To fix this, only release initialized resources.

[    1.792845] Trying to free already-free IRQ 11
[    1.793091] WARNING: CPU: 0 PID: 182 at kernel/irq/manage.c:1821 free_irq+0x202/0x380
[    1.801340] Call Trace:
[    1.801477]  adf_vf_isr_resource_free+0x32/0xb0 [intel_qat]
[    1.801785]  adf_vf_isr_resource_alloc+0x14d/0x150 [intel_qat]
[    1.802105]  adf_dev_init+0xba/0x140 [intel_qat]

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Fixes: dd0f368398ea ("crypto: qat - Add qat dh895xcc VF driver")
Acked-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: ccp - fix command queuing to TEE ring buffer

[ Upstream commit 00aa6e65aa04e500a11a2c91e92a11c37b9e234d ]

Multiple threads or clients can submit a command to the TEE ring
buffer. This patch helps to synchronize command submission to the
ring.

One thread shall write a command to a TEE ring buffer entry only if:

 - Trusted OS has notified that the TEE command for the given entry
   has been processed and driver has copied the TEE response into
   client buffer.

 - The command entry is empty and can be written into.

After a command has been written to the TEE ring buffer, the global
wptr (mutex protected) shall be incremented for use by next client.

If PSP became unresponsive while processing TEE request from a
client, then further command submission to queue will be disabled.

Fixes: 33960acccfbd (crypto: ccp - add TEE support for Raven Ridge)
Reviewed-by: Devaraj Rangasamy <Devaraj.Rangasamy@amd.com>
Signed-off-by: Rijo Thomas <Rijo-john.Thomas@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Provide a GPIO line used on Intel Minnowboard (v1)

[ Upstream commit 049d3db625a652e23488db88b6104de4d5b62f16 ]

Intel Minnowboard (v1) uses SCH GPIO line SUS7 (i.e. 12)
for VBUS sense. Provide a DMI based quirk to have it's being used.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Initialize device pointer before use

[ Upstream commit 971d080212be4ce2b91047d25a657f46d3e39635 ]

During conversion to use GPIO descriptors the device pointer,
which is applied to devm_gpiod_get(), is not yet initialized.

Move initialization in the ->probe() in order to have it set before use.

Fixes: e20849a8c883 ("usb: gadget: pch_udc: Convert to use GPIO descriptors")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check for DMA mapping error

[ Upstream commit 4a28d77e359009b846951b06f7c0d8eec8dce298 ]

DMA mapping might fail, we have to check it with dma_mapping_error().
Otherwise DMA-API is not happy:

  DMA-API: pch_udc 0000:02:02.4: device driver failed to check map error[device address=0x00000000027ee678] [size=64 bytes] [mapped as single]

Fixes: abab0c67c061 ("usb: pch_udc: Fixed issue which does not work with g_serial")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Check if driver is present before calling ->setup()

[ Upstream commit fbdbbe6d3ee502b3bdeb4f255196bb45003614be ]

Since we have a separate routine for VBUS sense, the interrupt may occur
before gadget driver is present. Hence, ->setup() call may oops the kernel:

[   55.245843] BUG: kernel NULL pointer dereference, address: 00000010
...
[   55.245843] EIP: pch_udc_isr.cold+0x162/0x33f
...
[   55.245843]  <IRQ>
[   55.245843]  ? pch_udc_svc_data_out+0x160/0x160

Check if driver is present before calling ->setup().

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: pch_udc: Replace cpu_to_le32() by lower_32_bits()

[ Upstream commit 91356fed6afd1c83bf0d3df1fc336d54e38f0458 ]

Either way ~0 will be in the correct byte order, hence
replace cpu_to_le32() by lower_32_bits(). Moreover,
it makes sparse happy, otherwise it complains:

.../pch_udc.c:1813:27: warning: incorrect type in assignment (different base types)
.../pch_udc.c:1813:27:    expected unsigned int [usertype] dataptr
.../pch_udc.c:1813:27:    got restricted __le32 [usertype]

Fixes: f646cf94520e ("USB device driver of Topcliff PCH")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

devtmpfs: fix placement of complete() call

[ Upstream commit 38f087de8947700d3b06d3d1594490e0f611c5d1 ]

Calling complete() from within the __init function is wrong -
theoretically, the init process could proceed all the way to freeing
the init mem before the devtmpfsd thread gets to execute the return
instruction in devtmpfs_setup().

In practice, it seems to be harmless as gcc inlines devtmpfs_setup()
into devtmpfsd(). So the calls of the __init functions init_chdir()
etc. actually happen from devtmpfs_setup(), but the __ref on that one
silences modpost (it's all right, because those calls happen before
the complete()). But it does make the __init annotation of the setup
function moot, which we'll fix in a subsequent patch.

Fixes: bcbacc4909f1 ("devtmpfs: refactor devtmpfsd()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Link: https://lore.kernel.org/r/20210312103027.2701413-1-linux@rasmusvillemoes.dk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/microcode: Check for offline CPUs before requesting new microcode

[ Upstream commit 7189b3c11903667808029ec9766a6e96de5012a5 ]

Currently, the late microcode loading mechanism checks whether any CPUs
are offlined, and, in such a case, aborts the load attempt.

However, this must be done before the kernel caches new microcode from
the filesystem. Otherwise, when offlined CPUs are onlined later, those
cores are going to be updated through the CPU hotplug notifier callback
with the new microcode, while CPUs previously onine will continue to run
with the older microcode.

For example:

Turn off one core (2 threads):

  echo 0 > /sys/devices/system/cpu/cpu3/online
  echo 0 > /sys/devices/system/cpu/cpu1/online

Install the ucode fails because a primary SMT thread is offline:

  cp intel-ucode/06-8e-09 /lib/firmware/intel-ucode/
  echo 1 > /sys/devices/system/cpu/microcode/reload
  bash: echo: write error: Invalid argument

Turn the core back on

  echo 1 > /sys/devices/system/cpu/cpu3/online
  echo 1 > /sys/devices/system/cpu/cpu1/online
  cat /proc/cpuinfo |grep microcode
  microcode : 0x30
  microcode : 0xde
  microcode : 0x30
  microcode : 0xde

The rationale for why the update is aborted when at least one primary
thread is offline is because even if that thread is soft-offlined
and idle, it will still have to participate in broadcasted MCE's
synchronization dance or enter SMM, and in both examples it will execute
instructions so it better have the same microcode revision as the other
cores.

 [ bp: Heavily edit and extend commit message with the reasoning behind all
   this. ]

Fixes: 30ec26da9967 ("x86/microcode: Do not upload microcode if CPUs are offline")
Signed-off-by: Otavio Pontes <otavio.pontes@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Acked-by: Ashok Raj <ashok.raj@intel.com>
Link: https://lkml.kernel.org/r/20210319165515.9240-2-otavio.pontes@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: Fix use-after-free on unbind

[ Upstream commit 79c6246ae8793448c05da86a4c82298eed8549b0 ]

stm32_spi_remove() accesses the driver's private data after calling
spi_unregister_master() even though that function releases the last
reference on the spi_master and thereby frees the private data.

Fix by switching over to the new devm_spi_alloc_master() helper which
keeps the private data accessible until the driver has unbound.

Fixes: 8d559a64f00b ("spi: stm32: drop devres version of spi_register_master")

Reported-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1616052290-10887-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: r8a77980: Fix vin4-7 endpoint binding

[ Upstream commit c8aebc1346522d3569690867ce3996642ad52e01 ]

This fixes the bindings in media framework:
The CSI40 is endpoint number 2
The CSI41 is endpoint number 3

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20210312174735.2118212-1-niklas.soderlund+renesas@ragnatech.se
Fixes: 3182aa4e0bf4d0ee ("arm64: dts: renesas: r8a77980: add CSI2/VIN support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regulator: bd9576: Fix return from bd957x_probe()

[ Upstream commit 320fcd6bbd2b500923db518902c2c640242d2b50 ]

The probe() function returns an uninitialized variable in the success
path.  There is no need for the "err" variable at all, just delete it.

Fixes: b014e9fae7e7 ("regulator: Support ROHM BD9576MUF and BD9573MUF")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/YEsbfLJfEWtnRpoU@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: stm32: drop devres version of spi_register_master

[ Upstream commit 8d559a64f00b59af9cc02b803ff52f6e6880a651 ]

A call to spi_unregister_master() triggers calling remove()
for all the spi devices binded to the spi master.

Some spi device driver requires to "talk" with the spi device
during the remove(), e.g.:
- a LCD panel like drivers/gpu/drm/panel/panel-lg-lg4573.c
  will turn off the backlighting sending a command over spi.
This implies that the spi master must be fully functional when
spi_unregister_master() is called, either if it is called
explicitly in the master's remove() code or implicitly by the
devres framework.

Devres calls devres_release_all() to release all the resources
"after" the remove() of the spi master driver (check code of
__device_release_driver() in drivers/base/dd.c).
If the spi master driver has an empty remove() then there would
be no issue; the devres_release_all() will release everything
in reverse order w.r.t. probe().
But if code in spi master driver remove() disables the spi or
makes it not functional (like in this spi-stm32), then devres
cannot be used safely for unregistering the spi master and the
binded spi devices.

Replace devm_spi_register_master() with spi_register_master()
and add spi_unregister_master() as first action in remove().

Fixes: dcbe0d84dfa5 ("spi: add driver for STM32 SPI controller")

Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://lore.kernel.org/r/1615545286-5395-1-git-send-email-alain.volmat@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - Fix memory leak of object d when dma_iv fails to map

[ Upstream commit 98b5ef3e97b16eaeeedb936f8bda3594ff84a70e ]

In the case where the dma_iv mapping fails, the return error path leaks
the memory allocated to object d.  Fix this by adding a new error return
label and jumping to this to ensure d is free'd before the return.

Addresses-Coverity: ("Resource leak")
Fixes: ac2614d721de ("crypto: sun8i-ss - Add support for the PRNG")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: db845c: fix correct powerdown pin for WSA881x

[ Upstream commit c561740e7cfefaf3003a256f3a0cd9f8a069137c ]

WSA881x powerdown pin is connected to GPIO1 not gpio2, so correct this.
This was working so far due to a shift bug in gpio driver, however
once that is fixed this will stop working, so fix this!

Fixes: 89a32a4e769cc ("arm64: dts: qcom: db845c: add analog audio support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210309102025.28405-1-srinivas.kandagatla@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: fix number of pins in 'gpio-ranges'

[ Upstream commit e526cb03e2aed42866a0919485a3d8ac130972cf ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node")
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-4-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8150: fix number of pins in 'gpio-ranges'

[ Upstream commit de3abdf3d15c6e7f456e2de3f9da78f3a31414cc ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: e13c6d144fa0 ("arm64: dts: qcom: sm8150: Add base dts file")
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-3-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sdm845: fix number of pins in 'gpio-ranges'

[ Upstream commit 02058fc3839df65ff64de2a6b1c5de8c9fd705c1 ]

The last cell of 'gpio-ranges' should be number of GPIO pins, and in
case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather
than msm_pinctrl_soc_data.ngpio - 1.

This fixes the problem that when the last GPIO pin in the range is
configured with the following call sequence, it always fails with
-EPROBE_DEFER.

    pinctrl_gpio_set_config()
        pinctrl_get_device_gpio_range()
            pinctrl_match_gpio_range()

Fixes: bc2c806293c6 ("arm64: dts: qcom: sdm845: Add gpio-ranges to TLMM node")
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210303033106.549-2-shawn.guo@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer

[ Upstream commit 29a3349543e4ce3fe4e2a761403cc629e3534c67 ]

ARM architected timer interrupts DT property specifies EL2/HYP
physical interrupt and not EL2/HYP virtual interrupt for the 4th
interrupt property. As per interrupt documentation for SM8250 SoC,
the EL2/HYP physical timer interrupt is 10 and EL2/HYP virtual timer
interrupt is 12, so fix the 4th timer interrupt to be EL2 physical
timer interrupt (10 in this case).

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/744e58f725d279eb2b049a7da42b0f09189f4054.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity

[ Upstream commit 93138ef5ac923b10f81575d35dbcb83136cbfc40 ]

As per interrupt documentation for SM8250 SoC, the polarity
for level triggered PMU interrupt is low, fix this.

Fixes: 60378f1a171e ("arm64: dts: qcom: sm8250: Add sm8250 dts file")
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/96680a1c6488955c9eef7973c28026462b2a4ec0.1613468366.git.saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: stm32: fix usart 2 & 3 pinconf to wake up with flow control

[ Upstream commit a1429f3d3029b65cd4032f6218d5290911377ce4 ]

Modify usart 2 & 3 pins to allow wake up from low power mode while the
hardware flow control is activated. UART RTS pin need to stay configure
in idle mode to receive characters in order to wake up.

Fixes: 842ed898a757 ("ARM: dts: stm32: add usart2, usart3 and uart7 pins in stm32mp15-pinctrl")

Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: maps: fix error return code of physmap_flash_remove()

[ Upstream commit 620b90d30c08684dc6ebee07c72755d997f9d1f6 ]

When platform_get_drvdata() returns NULL to info, no error return code
of physmap_flash_remove() is assigned.
To fix this bug, err is assigned with -EINVAL in this case

Fixes: 73566edf9b91 ("[MTD] Convert physmap to platform driver")
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210308034446.3052-1-baijiaju1990@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: don't lock when recursively deleting partitions

[ Upstream commit cb4543054c5c4fd33df960b41d7b483ebca8e786 ]

When recursively deleting partitions, don't acquire the masters
partition lock twice. Otherwise the process ends up in a deadlocked
state.

Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210217195320.893253-1-mail@david-bauer.net
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: qcom: Return actual error code instead of -ENODEV

[ Upstream commit 55fbb9ba4f06cb6aff32daca1e1910173c13ec51 ]

In qcom_probe_nand_devices() function, the error code returned by
qcom_nand_host_init_and_register() is converted to -ENODEV in the case
of failure. This poses issue if -EPROBE_DEFER is returned when the
dependency is not available for a component like parser.

So let's restructure the error handling logic a bit and return the
actual error code in case of qcom_nand_host_init_and_register() failure.

Fixes: c76b78d8ec05 ("mtd: nand: Qualcomm NAND controller driver")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: Handle possible -EPROBE_DEFER from parse_mtd_partitions()

[ Upstream commit 08608adb520e51403be7592c2214846fa440a23a ]

There are chances that the parse_mtd_partitions() function will return
-EPROBE_DEFER in mtd_device_parse_register(). This might happen when
the dependency is not available for the parser. For instance, on SDX55
the MTD_QCOMSMEM_PARTS parser depends on the QCOM_SMEM driver to parse
the partitions defined in the shared memory region. With the current
flow, the error returned from parse_mtd_partitions() will be discarded
in favor of trying to add the fallback partition.

This will prevent the driver to end up in probe deferred pool and the
partitions won't be parsed even after the QCOM_SMEM driver is available.

Fix this issue by bailing out of mtd_device_parse_register() when
-EPROBE_DEFER error is returned from parse_mtd_partitions() function and
propagate the error code to the driver core for probing later.

Fixes: 5ac67ce36cfe ("mtd: move code adding (registering) partitions to the parse_mtd_partitions()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: brcmnand: fix OOB R/W with Hamming ECC

[ Upstream commit f5200c14242fb8fa4a9b93f7fd4064d237e58785 ]

Hamming ECC doesn't cover the OOB data, so reading or writing OOB shall
always be done without ECC enabled.
This is a problem when adding JFFS2 cleanmarkers to erased blocks. If JFFS2
clenmarkers are added to the OOB with ECC enabled, OOB bytes will be changed
from ff ff ff to 00 00 00, reporting incorrect ECC errors.

Fixes: 27c5b17cd1b1 ("mtd: nand: add NAND driver "library" for Broadcom STB NAND controller")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Acked-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210224080210.23686-1-noltari@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: rawnand: fsmc: Fix error code in fsmc_nand_probe()

[ Upstream commit e7a97528e3c787802d8c643d6ab2f428511bb047 ]

If dma_request_channel() fails then the probe fails and it should
return a negative error code, but currently it returns success.

fixes: 4774fb0a48aa ("mtd: nand/fsmc: Add DMA support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YCqaOZ83OvPOzLwh@mwanda
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: avoid objtool warning

[ Upstream commit e50989527faeafb79f45a0f7529ba8e01dff1fff ]

Building this file with clang leads to a an unreachable code path
causing a warning from objtool:

drivers/spi/spi-rockchip.o: warning: objtool: rockchip_spi_transfer_one()+0x2e0: sibling call from callable instruction with modified stack frame

Change the unreachable() into an error return that can be
handled if it ever happens, rather than silently crashing
the kernel.

Fixes: 65498c6ae241 ("spi: rockchip: support 4bit words")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20210226140109.3477093-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

regmap: set debugfs_name to NULL after it is freed

[ Upstream commit e41a962f82e7afb5b1ee644f48ad0b3aee656268 ]

There is a upstream commit cffa4b2122f5("regmap:debugfs:
Fix a memory leak when calling regmap_attach_dev") that
adds a if condition when create name for debugfs_name.
With below function invoking logical, debugfs_name is
freed in regmap_debugfs_exit(), but it is not created again
because of the if condition introduced by above commit.
regmap_reinit_cache()
regmap_debugfs_exit()
...
regmap_debugfs_init()
So, set debugfs_name to NULL after it is freed.

Fixes: cffa4b2122f5 ("regmap: debugfs: Fix a memory leak when calling regmap_attach_dev")
Signed-off-by: Meng Li <Meng.Li@windriver.com>
Link: https://lore.kernel.org/r/20210226021737.7690-1-Meng.Li@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: stusb160x: fix return value check in stusb160x_probe()

[ Upstream commit f2d90e07b5df2c7745ae66d2d48cc350d3f1c7d2 ]

In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: da0cb6310094 ("usb: typec: add support for STUSB160x Type-C controller family")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094839.3586773-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tps6598x: Fix return value check in tps6598x_probe()

[ Upstream commit 604c75893a01c8a3b5bd6dac55535963cd44c3f5 ]

In case of error, the function device_get_named_child_node() returns
NULL pointer not ERR_PTR(). The IS_ERR() test in the return value check
should be replaced with NULL test.

Fixes: 18a6c866bb19 ("usb: typec: tps6598x: Add USB role switching logic")
Reported-by: Hulk Robot <hulkci@huawei.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210308094841.3587751-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tcpci: Check ROLE_CONTROL while interpreting CC_STATUS

[ Upstream commit 19c234a14eafca78e0bc14ffb8be3891096ce147 ]

While interpreting CC_STATUS, ROLE_CONTROL has to be read to make
sure that CC1/CC2 is not forced presenting Rp/Rd.

>From the TCPCI spec:

4.4.5.2 ROLE_CONTROL (Normative):
The TCPM shall write B6 (DRP) = 0b and B3..0 (CC1/CC2) if it wishes
to control the Rp/Rd directly instead of having the TCPC perform
DRP toggling autonomously. When controlling Rp/Rd directly, the
TCPM writes to B3..0 (CC1/CC2) each time it wishes to change the
CC1/CC2 values. This control is used for TCPM-TCPC implementing
Source or Sink only as well as when a connection has been detected
via DRP toggling but the TCPM wishes to attempt Try.Src or Try.Snk.

Table 4-22. CC_STATUS Register Definition:
If (ROLE_CONTROL.CC1 = Rd) or ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp-1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp-3.0A

If (ROLE_CONTROL.CC2=Rd) or (ConnectResult=1)
00b: SNK.Open (Below maximum vRa)
01b: SNK.Default (Above minimum vRd-Connect)
10b: SNK.Power1.5 (Above minimum vRd-Connect) Detects Rp 1.5A
11b: SNK.Power3.0 (Above minimum vRd-Connect) Detects Rp 3.0A

Fixes: 74e656d6b0551 ("staging: typec: Type-C Port Controller Interface driver (tcpci)")
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20210304070931.1947316-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix tx_empty condition

[ Upstream commit 3db1d52466dc11dca4e47ef12a6e6e97f846af62 ]

In "tx_empty", we should poll TC bit in both DMA and PIO modes (instead of
TXE) to check transmission data register has been transmitted independently
of the FIFO mode. TC indicates that both transmit register and shift
register are empty. When shift register is empty, tx_empty should return
TIOCSER_TEMT instead of TC value.

Cleans the USART_CR_TC TCCF register define (transmission complete clear
flag) as it is duplicate of USART_ICR_TCCF.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-13-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: add FIFO flush when port is closed

[ Upstream commit 9f77d19207a0e8ba814c8ceb22e90ce7cb2aef64 ]

Transmission complete error is sent when ISR_TC is not set. If port closure
is requested despite data in TDR / TX FIFO has not been sent (because of
flow control), ISR_TC is not set and error message is sent on port closure
but also when a new port is opened.

Flush the data when port is closed, so the error isn't printed twice upon
next port opening.

Fixes: 64c32eab6603 ("serial: stm32: Add support of TC bit status check")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-12-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix FIFO flush in startup and set_termios

[ Upstream commit 315e2d8a125ad77a1bc28f621162713f3e7aef48 ]

Fifo flush set USART_RQR register by calling stm32_usart_set_bits
routine (Read/Modify/Write). USART_RQR register is a write only
register. So, read before write isn't correct / relevant to flush
the FIFOs.
Replace stm32_usart_set_bits call by writel_relaxed.

Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-11-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: call stm32_transmit_chars locked

[ Upstream commit f16b90c2d9db3e6ac719d1946b9d335ca4ab33f3 ]

stm32_transmit_chars should be called under lock also in tx DMA callback.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-10-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix tx dma completion, release channel

[ Upstream commit fb4f2e04ac13e7c400e6b86afbbd314a5a2a7e8d ]

This patch add a proper release of dma channels when completing dma tx.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-9-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix a deadlock in set_termios

[ Upstream commit 436c97936001776f16153771ee887f125443e974 ]

CTS/RTS GPIOs support that has been added recently to STM32 UART driver has
introduced scheduled code in a set_termios part protected by a spin lock.
This generates a potential deadlock scenario:

Chain exists of:
&irq_desc_lock_class --> console_owner --> &port_lock_key

Possible unsafe locking scenario:

     CPU0                    CPU1
     ----                    ----
lock(&port_lock_key);
                           lock(console_owner);
                           lock(&port_lock_key);
lock(&irq_desc_lock_class);

*** DEADLOCK ***
4 locks held by stty/766:

Move the scheduled code after the spinlock.

Fixes: 6cf61b9bd7cc ("tty: serial: Add modem control gpio support for STM32 UART")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-8-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix wake-up flag handling

[ Upstream commit 12761869f0efa524348e2ae31827fd52eebf3f0d ]

This patch fixes several issue with wake-up handling:
- the WUF irq is handled several times at wake-up
- the USART is disabled / enabled at suspend to set wake-up flag.
It can cause glitches during RX.

This patch fix those issues:
- clear wake-up flag and disable wake-up irq in WUF irq handling
- enable wake-up from low power on start bit detection at port
configuration
- Unmask the wake-up flag irq at suspend and mask it at resume

In addition, pm_wakeup_event handling is moved from receice_chars to WUF
irq handling.

Fixes: 270e5a74fe4c ("serial: stm32: add wakeup mechanism")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-7-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix a deadlock condition with wakeup event

[ Upstream commit ad7676812437a00a4c6be155fc17926069f99084 ]

Deadlock issue is seen when enabling CONFIG_PROVE_LOCKING=Y, and uart
console as wakeup source. Deadlock occurs when resuming from low power
mode if system is waked up via usart console.
The deadlock is triggered 100% when also disabling console suspend prior
to go to suspend.

Simplified call stack, deadlock condition:
- stm32_console_write <-- spin_lock already held
- print_circular_bug
- pm_wakeup_dev_event <-- triggers lockdep as seen above
- stm32_receive_chars
- stm32_interrupt <-- wakeup via uart console, takes the lock

So, revisit spin_lock in stm32-usart driver:
- there is no need to hold the lock to access ICR (atomic clear of status
  flags)
- only hold the lock inside stm32_receive_chars() routine (no need to
  call pm_wakeup_dev_event with lock held)
- keep stm32_transmit_chars() routine called with lock held

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-6-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix TX and RX FIFO thresholds

[ Upstream commit 25a8e7611da5513b388165661b17173c26e12c04 ]

TX and RX FIFO thresholds may be cleared after suspend/resume, depending
on the low power mode.

Those configurations (done in startup) are not effective for UART console,
as:
- the reference manual indicates that FIFOEN bit can only be written when
  the USART is disabled (UE=0)
- a set_termios (where UE is set) is requested firstly for console
  enabling, before the startup.

Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-5-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix incorrect characters on console

[ Upstream commit f264c6f6aece81a9f8fbdf912b20bd3feb476a7a ]

Incorrect characters are observed on console during boot. This issue occurs
when init/main.c is modifying termios settings to open /dev/console on the
rootfs.

This patch adds a waiting loop in set_termios to wait for TX shift register
empty (and TX FIFO if any) before stopping serial port.

Fixes: 48a6092fb41f ("serial: stm32-usart: Add STM32 USART Driver")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix startup by enabling usart for reception

[ Upstream commit f4518a8a75f5be1a121b0c95ad9c6b1eb27d920e ]

RX is configured, but usart is not enabled in startup function.
Kernel documentation specifies that startup should enable the port for
reception.
Fix the startup by enabling usart for reception.

Fixes: 84872dc448fe ("serial: stm32: add RX and TX FIFO flush")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: Use of_device_get_match_data()

[ Upstream commit d825f0bea20f49a8f413a6acd7c4100ea55edf6d ]

This driver casts away the constness of struct stm32_usart_info that is
pointed to by the of match table. Use of_device_get_match_data() instead
of of_match_device() here and push the const throughout the code so that
we don't cast away const. This nicely avoids referencing the match table
when it is undefined with configurations where CONFIG_OF=n and fixes the
const issues.

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: <linux-serial@vger.kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210123034428.2841052-4-swboyd@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix probe and remove order for dma

[ Upstream commit 87fd0741d6dcf63ebdb14050c2b921ae14c7f307 ]

The probe and remove orders are wrong as the uart_port is registered
before saving device data in the probe, and unregistered after DMA
resource deallocation in the remove. uart_port registering should be
done at the end of probe and unregistering should be done at the begin of
remove to avoid resource allocation issues.

Fix probe and remove orders. This enforce resource allocation occur at
proper time.
Terminate both DMA rx and tx transfers before removing device.

Move pm_runtime after uart_remove_one_port() call in remove() to keep the
probe error path.

Fixes: 3489187204eb ("serial: stm32: adding dma support")
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210304162308.8984-2-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: add "_usart" prefix in functions name

[ Upstream commit 56f9a76c27b51bc8e9bb938734e3de03819569ae ]

Adds the prefix "_usart" in the name of stm32 usart functions in order to
ease the usage of kernel trace and tools, such as f-trace.
Allows to trace "stm32_usart_*" functions with f-trace. Without this patch,
all the driver functions needs to be added manually in f-trace filter.

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Valentin Caron <valentin.caron@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-4-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: stm32: fix code cleaning warnings and checks

[ Upstream commit 92fc00238675a15cc48f09694949f0c0012e0ff4 ]

Fixes checkpatch --strict warnings and checks:
- checkpatch --strict "Unnecessary parentheses"
- checkpatch --strict "Blank lines aren't necessary before a close brace
- checkpatch --strict "Alignment should match open parenthesis"
- checkpatch --strict "Please don't use multiple blank lines"
- checkpatch --strict "Comparison to NULL could be written ..."
- visual check code ordering warning

Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Link: https://lore.kernel.org/r/20210106162203.28854-3-erwan.leray@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/platform/uv: Set section block size for hubless architectures

[ Upstream commit 6840a150b9daf35e4d21ab9780d0a03b4ed74a5b ]

Commit

  bbbd2b51a2aa ("x86/platform/UV: Use new set memory block size function")

added a call to set the block size value that is needed by the kernel
to set the boundaries in the section list. This was done for UV Hubbed
systems but missed in the UV Hubless setup. Fix that mistake by adding
that same set call for hubless systems, which support the same NVRAMs
and Intel BIOS, thus the same problem occurs.

 [ bp: Massage commit message. ]

Fixes: bbbd2b51a2aa ("x86/platform/UV: Use new set memory block size function")
Signed-off-by: Mike Travis <mike.travis@hpe.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steve Wahl <steve.wahl@hpe.com>
Reviewed-by: Russ Anderson <rja@hpe.com>
Link: https://lkml.kernel.org/r/20210305162853.299892-1-mike.travis@hpe.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: renesas: Add mmc aliases into board dts files

[ Upstream commit d765a4f302cc046ca23453ba990d21120ceadbbd ]

After the commit 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS
for drivers that existed in v4.14"), the order of /dev/mmcblkN
was not fixed in some SoCs which have multiple sdhi controllers.
So, we were hard to use an sdhi device as rootfs by using
the kernel parameter like "root=/dev/mmcblkNpM".

According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into Renesas
arm64 board dts files. Notes that mmc0 is an eMMC channel if
available.

[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/

Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1614596786-22326-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: renesas: Add mmc aliases into R-Car Gen2 board dts files

[ Upstream commit da926e813fc7f9f0912fa413981a1f5ba63a536d ]

After set PROBE_PREFER_ASYNCHRONOUS flag on the mmc host drivers,
the order of /dev/mmcblkN was not fixed in some SoCs which have
multiple SDHI and/or MMCIF controllers. So, we were hard to use
such a device as rootfs by using the kernel parameter like
"root=/dev/mmcblkNpM".

According to the discussion on a mainling list [1], we can add
mmc aliases to fix the issue. So, add such aliases into R-Car Gen2
board dts files. Note that, since R-Car Gen2 is even more complicated
about SDHI and/or MMCIF channels variations and they share pins,
add the aliases into board dts files instead of SoC dtsi files.

[1]
https://lore.kernel.org/linux-arm-kernel/CAPDyKFptyEQNJu8cqzMt2WRFZcwEdjDiytMBp96nkoZyprTgmA@mail.gmail.com/

Fixes: 7320915c8861 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.14")
Fixes: 21b2cec61c04 ("mmc: Set PROBE_PREFER_ASYNCHRONOUS for drivers that existed in v4.4")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/1613131316-30994-1-git-send-email-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: s5pv210: correct fuel gauge interrupt trigger level on Fascinate family

[ Upstream commit 214e6ec8c9f5a3353d3282b3ff475d3ee86cc21a ]

The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 99bb20321f0e ("ARM: dts: s5pv210: Correct fuelgauge definition on Aries")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-10-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Snow

[ Upstream commit 8987efbb17c2522be8615085df9a14da2ab53d34 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: c61248afa819 ("ARM: dts: Add max77686 RTC interrupt to cros5250-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-9-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on SMDK5250

[ Upstream commit f6368c60561370e4a92fac22982a3bd656172170 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 47580e8d94c2 ("ARM: dts: Specify MAX77686 pmic interrupt for exynos5250-smdk5250")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-8-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Odroid X/U3 family

[ Upstream commit 6503c568e97a52f8b7a3109718db438e52e59485 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: eea6653aae7b ("ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-6-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct PMIC interrupt trigger level on Midas family

[ Upstream commit e52dcd6e70fab51f53292e53336ecb007bb60889 ]

The Maxim PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 15dfdfad2d4a ("ARM: dts: Add basic dts for Exynos4412-based Trats 2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-5-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct MUIC interrupt trigger level on Midas family

[ Upstream commit 15107e443ab8c6cb35eff10438993e4bc944d9ae ]

The Maxim MUIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Additionally, the interrupt line is shared so using level sensitive
interrupt is here especially important to avoid races.

Fixes: 7eec1266751b ("ARM: dts: Add Maxim 77693 PMIC to exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-4-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct fuel gauge interrupt trigger level on Midas family

[ Upstream commit 8a45f33bd36efbb624198cfa9fdf1f66fd1c3d26 ]

The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: e8614292cd41 ("ARM: dts: Add Maxim 77693 fuel gauge node for exynos4412-trats2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-3-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: exynos: correct fuel gauge interrupt trigger level on GT-I9100

[ Upstream commit 46799802136670e00498f19898f1635fbc85f583 ]

The Maxim fuel gauge datasheets describe the interrupt line as active
low with a requirement of acknowledge from the CPU.  The falling edge
interrupt will mostly work but it's not correct.

Fixes: 8620cc2f99b7 ("ARM: dts: exynos: Add devicetree file for the Galaxy S2")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201210212534.216197-1-krzk@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

memory: gpmc: fix out of bounds read and dereference on gpmc_cs[]

[ Upstream commit e004c3e67b6459c99285b18366a71af467d869f5 ]

Currently the array gpmc_cs is indexed by cs before it cs is range checked
and the pointer read from this out-of-index read is dereferenced. Fix this
by performing the range check on cs before the read and the following
pointer dereference.

Addresses-Coverity: ("Negative array index read")
Fixes: 9ed7a776eb50 ("ARM: OMAP2+: Fix support for multiple devices on a GPMC chip select")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210223193821.17232-1-colin.king@canonical.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: sun8i-ss - fix result memory leak on error path

[ Upstream commit 1dbc6a1e25be8575d6c4114d1d2b841a796507f7 ]

This patch fixes a memory leak on an error path.

Fixes: d9b45418a917 ("crypto: sun8i-ss - support hash algorithms")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER

[ Upstream commit 484a58607a808c3721917f5ca5fba7eff809e4df ]

The current code produces an error message on devm_gpiod_get() errors even
when the error is -EPROBE_DEFER, which should be silent.

This has been observed producing a significant amount of messages like:

    xlnx-slave-spi spi1.1: Failed to get PROGRAM_B gpio: -517

Fix and simplify code by using the dev_err_probe() helper function.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Fixes: dd2784c01d93 ("fpga manager: xilinx-spi: check INIT_B pin during write_init")
Fixes: 061c97d13f1a ("fpga manager: Add Xilinx slave serial SPI driver")
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: xilinx: Remove zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE)

[ Upstream commit 79bfe480a0a0b259ab9fddcd2fe52c03542b1196 ]

zynqmp_pm_get_eemi_ops() was removed in commit 4db8180ffe7c: "Firmware: xilinx:
Remove eemi ops for fpga related APIs", but not in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE).
Any driver who want to communicate with PMC using EEMI APIs use the functions provided
for each function
This removed zynqmp_pm_get_eemi_ops() in IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE), and also
modify the documentation for this driver.

Fixes: 4db8180ffe7c ("firmware: xilinx: Remove eemi ops for fpga related APIs")
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Link: https://lore.kernel.org/r/20210215155849.2425846-1-iwamatsu@nigauri.org
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: xilinx: Add a blank line after function declaration

[ Upstream commit a80cefec2c2783166727324bde724c39aa8a12df ]

Fix all these issues which are also reported by checkpatch --strict.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/7b6007e05f6c01214861a37f198cd5bee62a4d3e.1606894725.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware: xilinx: Fix dereferencing freed memory

[ Upstream commit f1f21bece82c76a56a96988ec7d51ccc033d8949 ]

Fix smatch warning:
drivers/firmware/xilinx/zynqmp.c:1288 zynqmp_firmware_remove()
error: dereferencing freed memory 'feature_data'

Use hash_for_each_safe for safe removal of hash entry.

Fixes: acfdd18591ea ("firmware: xilinx: Use hash-table for api feature check")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tejas Patel <tejas.patel@xilinx.com>
Signed-off-by: Rajan Vaja <rajan.vaja@xilinx.com>
Link: https://lore.kernel.org/r/1612765883-22018-1-git-send-email-rajan.vaja@xilinx.com
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Revert "tools/power turbostat: adjust for temperature offset"

commit b2b94be787bf47eedd5890a249f3318bf9f1f1d5 upstream.

This reverts commit 6ff7cb371c4bea3dba03a56d774da925e78a5087.

Apparently the TCC offset should not be used to adjust what temperature
we show the user after all.

(on most systems, TCC offset is 0, FWIW)

Fixes: 6ff7cb371c4b

Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: pch_udc: Revert d3cb25a12138 completely

commit 50a318cc9b54a36f00beadf77e578a50f3620477 upstream.

The commit d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
obviously was not thought through and had made the situation even worse
than it was before. Two changes after almost reverted it. but a few
leftovers have been left as it. With this revert d3cb25a12138 completely.

While at it, narrow down the scope of unlocked section to prevent
potential race when prot_stall is assigned.

Fixes: d3cb25a12138 ("usb: gadget: udc: fix spin_lock in pch_udc")
Fixes: 9903b6bedd38 ("usb: gadget: pch-udc: fix lock")
Fixes: 1d23d16a88e6 ("usb: gadget: pch_udc: reorder spin_[un]lock to avoid deadlock")
Cc: Iago Abal <mail@iagoabal.eu>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210323153626.54908-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drm/qxl: do not run release if qxl failed to init"

commit 93d8da8d7efbf690c0a9eaca798acc0c625245e6 upstream.

This reverts commit b91907a6241193465ca92e357adf16822242296d.

Patch is broken, it effectively makes qxl_drm_release() a nop
because on normal driver shutdown qxl_drm_release() is called
*after* drm_dev_unregister().

Fixes: b91907a62411 ("drm/qxl: do not run release if qxl failed to init")
Cc: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20210204145712.1531203-3-kraxel@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ovl: fix missing revert_creds() on error path

commit 7b279bbfd2b230c7a210ff8f405799c7e46bbf48 upstream.

Smatch complains about missing that the ovl_override_creds() doesn't
have a matching revert_creds() if the dentry is disconnected.  Fix this
by moving the ovl_override_creds() until after the disconnected check.

Fixes: aa3ff3c152ff ("ovl: copy up of disconnected dentries")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "i3c master: fix missing destroy_workqueue() on error in i3c_master_register"

commit 0d95f41ebde40d552bb4fea64b1d618607915fd6 upstream.

Adding the destroy_workqueue call in i3c_master_register introduced below
kernel warning because it makes duplicate destroy_workqueue calls when
i3c_master_register fails after allocating the workqueue. The workqueue will
be destroyed by i3c_masterdev_release which is called by put_device at the
end of the i3c_master_register function eventually in failure cases so the
workqueue doesn't need to be destroyed in i3c_master_register.

[    6.972952] WARNING: CPU: 1 PID: 1 at lib/list_debug.c:48 __list_del_entry_valid+0x9c/0xf4
[    6.982205] list_del corruption, 8fe03c08->prev is LIST_POISON2 (00000122)
[    6.989910] CPU: 1 PID: 1 Comm: swapper/0 Tainted: G        W         5.10.23-c12838a-dirty-31dc772 #1
[    7.000295] Hardware name: Generic DT based system
[    7.005638] Backtrace:
[    7.008369] [<809133f0>] (dump_backtrace) from [<80913644>] (show_stack+0x20/0x24)
[    7.016819]  r7:00000030 r6:60000013 r5:00000000 r4:813b5d40
[    7.023137] [<80913624>] (show_stack) from [<8091e1a0>] (dump_stack+0x9c/0xb0)
[    7.031201] [<8091e104>] (dump_stack) from [<8011fa30>] (__warn+0xf8/0x154)
[    7.038972]  r7:00000030 r6:00000009 r5:804fa1c8 r4:80b6eca4
[    7.045289] [<8011f938>] (__warn) from [<80913d14>] (warn_slowpath_fmt+0x8c/0xc0)
[    7.053641]  r7:00000030 r6:80b6eca4 r5:80b6ed74 r4:818cc000
[    7.059960] [<80913c8c>] (warn_slowpath_fmt) from [<804fa1c8>] (__list_del_entry_valid+0x9c/0xf4)
[    7.069866]  r9:96becf8c r8:818cc000 r7:8fe03c10 r6:8fe03c00 r5:8fe03ba0 r4:ff7ead4c
[    7.078513] [<804fa12c>] (__list_del_entry_valid) from [<8013f0b4>] (destroy_workqueue+0x1c4/0x23c)
[    7.088615] [<8013eef0>] (destroy_workqueue) from [<806aa124>] (i3c_masterdev_release+0x40/0xb0)
[    7.098421]  r7:00000000 r6:81a43b80 r5:8fe65360 r4:8fe65048
[    7.104740] [<806aa0e4>] (i3c_masterdev_release) from [<805f3f04>] (device_release+0x40/0xb0)
[    7.114254]  r5:00000000 r4:8fe65048
[    7.118245] [<805f3ec4>] (device_release) from [<808fe754>] (kobject_put+0xc8/0x204)
[    7.126885]  r5:813978dc r4:8fe65048
[    7.130877] [<808fe68c>] (kobject_put) from [<805f5fbc>] (put_device+0x20/0x24)
[    7.139037]  r7:8fe65358 r6:8fe65368 r5:8fe65358 r4:8fe65048
[    7.145355] [<805f5f9c>] (put_device) from [<806abac4>] (i3c_master_register+0x338/0xb00)
[    7.154487] [<806ab78c>] (i3c_master_register) from [<806ae084>] (dw_i3c_probe+0x224/0x24c)
[    7.163811]  r10:00000000 r9:8fe7a100 r8:00000032 r7:819fa810 r6:819fa800 r5:8fe65040
[    7.172547]  r4:00000000
[    7.175376] [<806ade60>] (dw_i3c_probe) from [<805fdc14>] (platform_drv_probe+0x44/0x80)
[    7.184409]  r9:813a25c0 r8:00000000 r7:815ec114 r6:00000000 r5:813a25c0 r4:819fa810
[    7.193053] [<805fdbd0>] (platform_drv_probe) from [<805fb83c>] (really_probe+0x108/0x50c)
[    7.202275]  r5:815ec004 r4:819fa810
[    7.206265] [<805fb734>] (really_probe) from [<805fc180>] (driver_probe_device+0xb4/0x190)
[    7.215492]  r10:813dc000 r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa810 r5:00000000
[    7.224228]  r4:813a25c0
[    7.227055] [<805fc0cc>] (driver_probe_device) from [<805fc5cc>] (device_driver_attach+0xb8/0xc0)
[    7.236959]  r9:80c4385c r8:000000d9 r7:813a25c0 r6:819fa854 r4:819fa810
[    7.244439] [<805fc514>] (device_driver_attach) from [<805fc65c>] (__driver_attach+0x88/0x16c)
[    7.254051]  r7:00000000 r6:819fa810 r5:00000000 r4:813a25c0
[    7.260369] [<805fc5d4>] (__driver_attach) from [<805f954c>] (bus_for_each_dev+0x88/0xc8)
[    7.269489]  r7:00000000 r6:818cc000 r5:805fc5d4 r4:813a25c0
[    7.275806] [<805f94c4>] (bus_for_each_dev) from [<805fc76c>] (driver_attach+0x2c/0x30)
[    7.284739]  r7:81397c98 r6:00000000 r5:8fe7db80 r4:813a25c0
[    7.291057] [<805fc740>] (driver_attach) from [<805f9eec>] (bus_add_driver+0x120/0x200)
[    7.299984] [<805f9dcc>] (bus_add_driver) from [<805fce44>] (driver_register+0x98/0x128)
[    7.309005]  r7:80c4383c r6:00000000 r5:00000000 r4:813a25c0
[    7.315323] [<805fcdac>] (driver_register) from [<805fedb4>] (__platform_driver_register+0x50/0x58)
[    7.325410]  r5:818cc000 r4:81397c98
[    7.329404] [<805fed64>] (__platform_driver_register) from [<80c23398>] (dw_i3c_driver_init+0x24/0x28)
[    7.339790]  r5:818cc000 r4:80c23374
[    7.343784] [<80c23374>] (dw_i3c_driver_init) from [<80c01300>] (do_one_initcall+0xac/0x1d0)
[    7.353206] [<80c01254>] (do_one_initcall) from [<80c01630>] (kernel_init_freeable+0x1a8/0x204)
[    7.362916]  r8:000000d9 r7:80c4383c r6:00000007 r5:819ca2c0 r4:80c67680
[    7.370398] [<80c01488>] (kernel_init_freeable) from [<8091eb18>] (kernel_init+0x18/0x12c)
[    7.379616]  r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8091eb00
[    7.388343]  r4:00000000
[    7.391170] [<8091eb00>] (kernel_init) from [<80100148>] (ret_from_fork+0x14/0x2c)
[    7.399607] Exception stack(0x818cdfb0 to 0x818cdff8)
[    7.405243] dfa0:                                     00000000 00000000 00000000 00000000
[    7.414371] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    7.423499] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
[    7.430879]  r5:8091eb00 r4:00000000

This reverts commit 59165d16c699182b86b5c65181013f1fd88feb62.

Fixes: 59165d16c699 ("i3c master: fix missing destroy_workqueue() on error in i3c_master_register")
Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@linux.intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210408172803.24599-1-jae.hyun.yoo@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Revert "drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit"

commit d362fd0be456dba2d3d58a90b7a193962776562b upstream.

This reverts commit 1b479fb80160
("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit").

1. This commit is incorrect. "__skb_pad" will NOT free the skb on
failure when its "free_on_error" parameter is "false".

2. This commit claims to fix my commit. But it didn't CC me??

Fixes: 1b479fb80160 ("drivers/net/wan/hdlc_fr: Fix a double free in pvc_xmit")
Cc: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Xie He <xie.he.0141@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION read

commit 53b16dd6ba5cf64ed147ac3523ec34651d553cb0 upstream.

The doc says:
"The characteristics of a specific redistributor region can
 be read by presetting the index field in the attr data.
 Only valid for KVM_DEV_TYPE_ARM_VGIC_V3"

Unfortunately the existing code fails to read the input attr data.

Fixes: 04c110932225 ("KVM: arm/arm64: Implement KVM_VGIC_V3_ADDR_TYPE_REDIST_REGION")
Cc: stable@vger.kernel.org#v4.17+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210405163941.510258-3-eric.auger@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm64: Fully zero the vcpu state on reset

commit 85d703746154cdc6794b6654b587b0b0354c97e9 upstream.

On vcpu reset, we expect all the registers to be brought back
to their initial state, which happens to be a bunch of zeroes.

However, some recent commit broke this, and is now leaving a bunch
of registers (such as the FP state) with whatever was left by the
guest. My bad.

Zero the reset of the state (32bit SPSRs and FPSIMD state).

Cc: stable@vger.kernel.org
Fixes: e47c2055c68e ("KVM: arm64: Make struct kvm_regs userspace-only")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Stop looking for coalesced MMIO zones if the bus is destroyed

commit 5d3c4c79384af06e3c8e25b7770b6247496b4417 upstream.

Abort the walk of coalesced MMIO zones if kvm_io_bus_unregister_dev()
fails to allocate memory for the new instance of the bus.  If it can't
instantiate a new bus, unregister_dev() destroys all devices _except_ the
target device.   But, it doesn't tell the caller that it obliterated the
bus and invoked the destructor for all devices that were on the bus.  In
the coalesced MMIO case, this can result in a deleted list entry
dereference due to attempting to continue iterating on coalesced_zones
after future entries (in the walk) have been deleted.

Opportunistically add curly braces to the for-loop, which encompasses
many lines but sneaks by without braces due to the guts being a single
if statement.

Fixes: f65886606c2d ("KVM: fix memory leak in kvm_io_bus_unregister_dev()")
Cc: stable@vger.kernel.org
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210412222050.876100-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: Destroy I/O bus devices on unregister failure _after_ sync'ing SRCU

commit 2ee3757424be7c1cd1d0bbfa6db29a7edd82a250 upstream.

If allocating a new instance of an I/O bus fails when unregistering a
device, wait to destroy the device until after all readers are guaranteed
to see the new null bus.  Destroying devices before the bus is nullified
could lead to use-after-free since readers expect the devices on their
reference of the bus to remain valid.

Fixes: f65886606c2d ("KVM: fix memory leak in kvm_io_bus_unregister_dev()")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210412222050.876100-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: arm/arm64: Fix KVM_VGIC_V3_ADDR_TYPE_REDIST read

commit 94ac0835391efc1a30feda6fc908913ec012951e upstream.

When reading the base address of the a REDIST region
through KVM_VGIC_V3_ADDR_TYPE_REDIST we expect the
redistributor region list to be populated with a single
element.

However list_first_entry() expects the list to be non empty.
Instead we should use list_first_entry_or_null which effectively
returns NULL if the list is empty.

Fixes: dbd9733ab674 ("KVM: arm/arm64: Replace the single rdist region by a list")
Cc: <Stable@vger.kernel.org> # v4.18+
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reported-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210412150034.29185-1-eric.auger@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Truncate base/index GPR value on address calc in !64-bit

commit 82277eeed65eed6c6ee5b8f97bd978763eab148f upstream.

Drop bits 63:32 of the base and/or index GPRs when calculating the
effective address of a VMX instruction memory operand.  Outside of 64-bit
mode, memory encodings are strictly limited to E*X and below.

Fixes: 064aea774768 ("KVM: nVMX: Decoding memory operands of VMX instructions")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-7-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Truncate bits 63:32 of VMCS field on nested check in !64-bit

commit ee050a577523dfd5fac95e6cc182ebe0293ead59 upstream.

Drop bits 63:32 of the VMCS field encoding when checking for a nested
VM-Exit on VMREAD/VMWRITE in !64-bit mode.  VMREAD and VMWRITE always
use 32-bit operands outside of 64-bit mode.

The actual emulation of VMREAD/VMWRITE does the right thing, this bug is
purely limited to incorrectly causing a nested VM-Exit if a GPR happens
to have bits 63:32 set outside of 64-bit mode.

Fixes: a7cde481b6e8 ("KVM: nVMX: Do not forward VMREAD/VMWRITE VMExits to L1 if required so by vmcs12 vmread/vmwrite bitmaps")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Defer the MMU reload to the normal path on an EPTP switch

commit c805f5d5585ab5e0cdac6b1ccf7086eb120fb7db upstream.

Defer reloading the MMU after a EPTP successful EPTP switch.  The VMFUNC
instruction itself is executed in the previous EPTP context, any side
effects, e.g. updating RIP, should occur in the old context.  Practically
speaking, this bug is benign as VMX doesn't touch the MMU when skipping
an emulated instruction, nor does queuing a single-step #DB.  No other
post-switch side effects exist.

Fixes: 41ab93727467 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Inject #GP on guest MSR_TSC_AUX accesses if RDTSCP unsupported

commit 6f2b296aa6432d8274e258cc3220047ca04f5de0 upstream.

Inject #GP on guest accesses to MSR_TSC_AUX if RDTSCP is unsupported in
the guest's CPUID model.

Fixes: 46896c73c1a4 ("KVM: svm: add support for RDTSCP")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210423223404.3860547-2-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Do not allow SEV/SEV-ES initialization after vCPUs are created

commit 8727906fde6ea665b52e68ddc58833772537f40a upstream.

Reject KVM_SEV_INIT and KVM_SEV_ES_INIT if they are attempted after one
or more vCPUs have been created.  KVM assumes a VM is tagged SEV/SEV-ES
prior to vCPU creation, e.g. init_vmcb() needs to mark the VMCB as SEV
enabled, and svm_create_vcpu() needs to allocate the VMSA.  At best,
creating vCPUs before SEV/SEV-ES init will lead to unexpected errors
and/or behavior, and at worst it will crash the host, e.g.
sev_launch_update_vmsa() will dereference a null svm->vmsa pointer.

Fixes: 1654efcbc431 ("KVM: SVM: Add KVM_SEV_INIT command")
Fixes: ad73109ae7ec ("KVM: SVM: Provide support to launch and run an SEV-ES guest")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210331031936.2495277-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Don't strip the C-bit from CR2 on #PF interception

commit 6d1b867d045699d6ce0dfa0ef35d1b87dd36db56 upstream.

Don't strip the C-bit from the faulting address on an intercepted #PF,
the address is a virtual address, not a physical address.

Fixes: 0ede79e13224 ("KVM: SVM: Clear C-bit from the page fault address")
Cc: stable@vger.kernel.org
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nSVM: Set the shadow root level to the TDP level for nested NPT

commit a3322d5cd87fef5ec0037fd1b14068a533f9a60f upstream.

Override the shadow root level in the MMU context when configuring
NPT for shadowing nested NPT.  The level is always tied to the TDP level
of the host, not whatever level the guest happens to be using.

Fixes: 096586fda522 ("KVM: nSVM: Correctly set the shadow NPT root level in its MMU role")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Remove emulator's broken checks on CR0/CR3/CR4 loads

commit d0fe7b6404408835ed60232cb3bf28324b2f95db upstream.

Remove the emulator's checks for illegal CR0, CR3, and CR4 values, as
the checks are redundant, outdated, and in the case of SEV's C-bit,
broken.  The emulator manually calculates MAXPHYADDR from CPUID and
neglects to mask off the C-bit.  For all other checks, kvm_set_cr*() are
a superset of the emulator checks, e.g. see CR4.LA57.

Fixes: a780a3ea6282 ("KVM: X86: Fix reserved bits check for MOV to CR3")
Cc: Babu Moger <babu.moger@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210422022128.3464144-2-seanjc@google.com>
Cc: stable@vger.kernel.org
[Unify check_cr_read and check_cr_write. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Alloc page for PDPTEs when shadowing 32-bit NPT with 64-bit

commit 04d45551a1eefbea42655da52f56e846c0af721a upstream.

Allocate the so called pae_root page on-demand, along with the lm_root
page, when shadowing 32-bit NPT with 64-bit NPT, i.e. when running a
32-bit L1.  KVM currently only allocates the page when NPT is disabled,
or when L0 is 32-bit (using PAE paging).

Note, there is an existing memory leak involving the MMU roots, as KVM
fails to free the PAE roots on failure.  This will be addressed in a
future commit.

Fixes: ee6268ba3a68 ("KVM: x86: Skip pae_root shadow allocation if tdp enabled")
Fixes: b6b80c78af83 ("KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT")
Cc: stable@vger.kernel.org
Reviewed-by: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305011101.3597423-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: extend kvm_s390_shadow_fault to return entry pointer

commit 5ac14bac08ae827b619f21bcceaaac3b8c497e31 upstream.

Extend kvm_s390_shadow_fault to return the pointer to the valid leaf
DAT table entry, or to the invalid entry.

Also return some flags in the lower bits of the address:
PEI_DAT_PROT: indicates that DAT protection applies because of the
              protection bit in the segment (or, if EDAT, region) tables.
PEI_NOT_PTE: indicates that the address of the DAT table entry returned
             does not refer to a PTE, but to a segment or region table.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: Janosch Frank <frankja@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Link: https://lore.kernel.org/r/20210302174443.514363-3-imbrenda@linux.ibm.com
[borntraeger@de.ibm.com: fold in a fix from Claudio]
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>