pinctrl: add mt7981 pinctrl driver

Add pinctrl driver for the MediaTek MT7981 SoC, based on the driver
which can also be found the SDK.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/ef5112946d16cacc67e65e439ba7b52a9950c1bb.1674693008.git.daniel@makrotopia.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: add bindings for MT7981 SoC

Add bindings for the MT7981 pinctrl driver. As MT7981 has most features
in common with MT7986 (but has a different layout in terms on pinctrl
and clocks), the existing mediatek,mt7986-pinctrl.yaml was used as an
example to create a similar document covering MT7981.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/3f0fd0becc338eef66caeb7244c3c432b8d1ef7a.1674693008.git.daniel@makrotopia.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: rockchip,pinctrl: mark gpio sub nodes of pinctrl as deprecated

Mark gpio sub nodes of pinctrl as deprecated.
Gpio nodes are now placed in the root of the device tree.
The relation to pinctrl is now described with the
"gpio-ranges" property.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/137b56f0-8e86-f705-4ba7-d5dfe3c0b477@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Introduce IPQ5332 TLMM driver

The IPQ5332 SoC comes with a TLMM block, like all other Qualcomm
platforms, so add a driver for it.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230206071217.29313-3-quic_kathirav@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: add IPQ5332 pinctrl

Add device tree bindings for IPQ5332 TLMM block.

Signed-off-by: Kathiravan T <quic_kathirav@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230206071217.29313-2-quic_kathirav@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: pinctrl-sm8550-lpass-lpi: add SM8550 LPASS

Add druver for pin controller in Low Power Audio SubSystem (LPASS).  The
driver is similar to SM8450 LPASS pin controller, with differences in
few pin groups (qua_mi2s -> i2s0).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,sm8550-lpass-lpi-pinctrl: add SM8550 LPASS

Add bidings for pin controller in Low Power Audio SubSystem (LPASS).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230203174645.597053-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91: use devm_kasprintf() to avoid potential leaks

Use devm_kasprintf() instead of kasprintf() to avoid any potential
leaks. At the moment drivers have no remove functionality thus
there is no need for fixes tag.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230203132714.1931596-1-claudiu.beznea@microchip.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: add the tlmm driver sa8775p platforms

Add support for Lemans TLMM configuration and control via the pinctrl
framework.

Signed-off-by: Yadu MG <quic_ymg@quicinc.com>
Signed-off-by: Prasad Sodagudi <quic_psodagud@quicinc.com>
[Bartosz: made the driver ready for upstream]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-3-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: describe sa8775p-tlmm

Add DT bindings for the TLMM controller on sa8775p platforms.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230201150011.200613-2-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v6.3-1' of git://git./linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v6.3-1

* Add ~4kOhm bias support to Intel pin control drivers
* Convert Intel pin control drivers to use INTEL_COMMUNITY_*()
* Add struct pinfunction and use it in Intel pin control drivers
* Make pin control documentation up to date
* Miscellaneous cleanups

The following is an automated git shortlog grouped by driver:

pinctrl:
 - Proofreading and updating the documentation accordingly
 - Proofreading and updating the documentation (part 2)

alderlake:
 -  Replace ADL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

baytrail:
 -  Convert to use new memeber in struct intel_function

broxton:
 -  Replace BXT_COMMUNITY() by INTEL_COMMUNITY_SIZE()

cannonlake:
 -  Replace CNL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cedarfork:
 -  Replace CDF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

cherryview:
 -  Convert to use new memeber in struct intel_function

denverton:
 -  Replace DNV_COMMUNITY() by INTEL_COMMUNITY_GPPS()

elkhartlake:
 -  Replace EHL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

emmitsburg:
 -  Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()

geminilake:
 -  Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()

icelake:
 -  Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

intel:
 -  Get rid of unused members in struct intel_function
 -  Make use of struct pinfunction and PINCTRL_PINFUNCTION()
 -  Define maximum pad number in the group
 -  Use same order of bit fields for PADCFG2
 -  Add ~4k bias support
 -  Add definitions to all possible biases
 -  Deduplicate some code in intel_config_set_pull()
 -  Add default case to intel_config_set_pull()
 -  Convert to generic_handle_domain_irq()
 -  Always use gpp_num_padown_regs in the main driver
 -  Introduce INTEL_COMMUNITY_*() to unify community macros

Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro:
 - Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro

jasperlake:
 -  Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lakefield:
 -  Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

lewisburg:
 -  Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()

lynxpoint:
 -  Convert to use new memeber in struct intel_function

merrifield:
 -  Convert to use new memeber in struct intel_function

meteorlake:
 -  Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

moorefield:
 -  Convert to use new memeber in struct intel_function

sunrisepoint:
 -  Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()

tigerlake:
 -  Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Merge tag 'renesas-pinctrl-for-v6.3-tag1' of git://git./linux/kernel/git/geert/renesas-drivers into devel

pinctrl: renesas: Updates for v6.3

  - Add pin groups for Video-In channels 4 and 5 on R-Car H3 ES1.x,
  - Miscellaneous fixes and improvements.

Merge tag 'qcom-pinctrl-6.3' of https://git./linux/kernel/git/krzk/linux-dt into devel

Qualcomm pinctrl Devicetree bindings changes for v6.3

Set of cleanups and fixes for Qualcomm pin controller bindings, to match
existing DTS and correct the schema.

pinctrl: at91: fix deferred probing support

AT91 pinctrl deferred probing support is broken if the GPIO devices
haven't probed first and set gpio_banks to non-zero. The later condition
that only some GPIO devices haven't probed can't actually happen as
either all the GPIO devices have probed first or none of them have. Plus
the pinctrl driver has already returned -EINVAL, so it's not on the
deferred list to retry probing.

Fix this by consolidating the checking that all GPIO devices are probed.

Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-gpio@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Tested-by: Nicolas Ferre <nicolas.ferre@microchip.com> # on sama5d3 xplained
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20180712192222.32481-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mediatek: Fix child node name patterns

The child node name patterns in Mediatek pinctrl bindings don't match
reality. I don't know where '-[0-9]+$' came from, but I don't see any nodes
with a matching pattern. Also, patterns such as 'pins' or 'mux' are
ambiguous because any prefix or suffix is allowed. If that's desired, it
should be explicit.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120020536.3229300-1-robh@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91: Tag suspend/resume __maybe_unused

Tag the suspend/resume callbacks as __maybe_unused to silence
complaints from the build robots.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: renesas: r8a77950: Add VIN[45] pins, groups, and functions

Add pins, groups, and functions for channels 4 and 5 of the Video Input
Module (VIN) on the Renesas R-Car H3 ES1.x (R8A77950) SoC, based on
the version for the R-Car H3 ES2.0+ (R8A77951) SoC.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/92c9b3b535d27ea7fcc0aa73d298783d710c214a.1673425207.git.geert+renesas@glider.be

pinctrl: renesas: rzg2l: Add BUILD_BUG_ON() checks

Add BUILD_BUG_ON() checks to avoid overflows for GPIO configs for each
supported SoC.

While at it, for readability set n_port_pins based on the GPIO pin configs
and not on GPIO names for r9a07g044_data as done for r9a07g043_data.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-4-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: rzg2l: Fix configuring the GPIO pins as interrupts

On the RZ/G2UL SoC we have less number of pins compared to RZ/G2L and also
the pin configs are completely different. This patch makes sure we use the
appropriate pin configs for each SoC (which is passed as part of the OF
data) while configuring the GPIO pin as interrupts instead of using
rzg2l_gpio_configs[] for all the SoCs.

Fixes: bfc69bdbaad1 ("pinctrl: renesas: rzg2l: Add RZ/G2UL support")
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230102221815.273719-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

pinctrl: renesas: r8a779g0: Fix alignment in GPSR[678]_* macros

The alignment of the second column in the definitions of the GPSR[678]_*
macros does not match the alignment used in other definitions.
Fix this to improve uniformity.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/9424a0e7f6d66a94d333df9fdc5cdf3b7defb8f5.1669036423.git.geert+renesas@glider.be

dt-bindings: pinctrl: add bindings for Mediatek MT8365 SoC

Add devicetree bindings for Mediatek MT8365 pinctrl driver.

Signed-off-by: Bernhard Rosenkränzer <bero@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230125143503.1015424-5-bero@baylibre.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: Initialize variable *buf to zero

Coverity spotted that *buf is not initialized to zero in
mtk_pctrl_dbg_show. Using uninitialized variable *buf as argument to %s
when calling seq_printf. Fix this coverity by initializing *buf as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-3-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: Initialize variable pullen and pullup to zero

Coverity spotted that pullen and pullup is not initialized to zero in
mtk_pctrl_show_one_pin. The uninitialized variable pullen is used in
assignment statement "rsel = pullen;" in mtk_pctrl_show_one_pin, and
Uninitialized variable pullup is used when calling scnprintf. Fix this
coverity by initializing pullen and pullup as zero.

Fixes: 184d8e13f9b1 ("pinctrl: mediatek: Add support for pin configuration dump via debugfs.")
Signed-off-by: Guodong Liu <Guodong.Liu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230118062036.26258-2-Guodong.Liu@mediatek.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Unify accessing to device fwnode

The device fwnode can be get via dev_fwnode() getter.
Use it where it makes sense.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230113220703.45686-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Revert "gpiolib: of: Introduce hook for missing gpio-ranges"

This reverts commit 3550bba25d5587a701e6edf20e20984d2ee72c78.

No users for this one, revert it for good.
The ->add_pin_ranges() can be used instead.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm2835: Switch to use ->add_pin_ranges()

Yeah, while the ->add_pin_ranges() shouldn't be used by DT drivers,
this one requires it to support quite old firmware descriptions that
do not have gpio-ranges property.

The change allows to clean up GPIO library from OF specifics.
There is no functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: bcm2835: Remove of_node_put() in bcm2835_of_gpio_ranges_fallback()

Remove wrong of_node_put() in bcm2835_of_gpio_ranges_fallback(),
there is no counterpart of_node_get() for it.

Fixes: d2b67744fd99 ("pinctrl: bcm2835: implement hook for missing gpio-ranges")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpiolib: Check "gpio-ranges" before calling ->add_pin_ranges()

The ->add_pin_ranges() is supposed to be called for the backward
compatiblity on Device Tree platforms or non-DT ones. Ensure that
by checking presense of the "gpio-ranges" property.

This allows to clean up a few existing drivers to avoid duplication
of the check.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230113215352.44272-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,pmic-mpp: Rename "mpp" child node names to "-pins$"

Just 'mpp' is a bit ambiguous for a pattern as it allows any prefix or
suffix. Change the node name pattern to "-pins$" to align with other
Qualcomm pinctrl bindings.

Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230120165103.1278852-1-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

pinctrl: Proofreading and updating the documentation (part 2)

Do the following:
- update the "Definitions" style in two sections
- don't use "I" for technical documentation
- inline the remaining (variables, function names, file paths)

Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: Proofreading and updating the documentation accordingly

Proofreading and updating the documentation accordingly, i.e. fixed:

  - ambiguity of foo_set_mux() implementation and explanations
  - semantics in some of the examples, e.g. _probe() --> _init()
  - references to the callbacks to make them start with dot
  - references to the legacy API by replacing them with newer one
  - indentation in some of the examples
  - double words or phrases

updated:

  - unsigned --> unsigned int in some of the examples
  - use struct pingroup and PINCTRL_PINGROUP() in some of the examples
  - use struct pinfunction and PINCTRL_PINFUNCTION() in some of the examples

and enabled:

  - syntax highlighting for the examples in the programming languages
  - chapter references

Yet to clarify:

  - "gpioN" menton for the default function when requesting GPIO

Co-developed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: nomadik: remove duplicate included header files

linux/seq_file.h is included more than once.

Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Link: https://lore.kernel.org/r/202301161545238948580@zte.com.cn
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: digicolor: Use proper headers and drop OF dependency

The driver doesn't depend on the OF to be complied. Hence
the proper header to use is mod_devicetable.h. Replace of*.h with
the above mentioned and drop redundant dependency.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: digicolor: Remove duplicate assignment of of_gpio_n_cells

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/20230113143640.24302-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sunplus: sppctl: Remove duplicate assignment of of_gpio_n_cells

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112185122.45216-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: lpass-lpi: Remove duplicate assignment of of_gpio_n_cells

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184923.80442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mediatek: Remove duplicate assignment of of_gpio_n_cells

The of_gpio_n_cells default is 2 when ->of_xlate() callback is
not defined. No need to assign it explicitly in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230112184340.79606-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: samsung: Do not mention legacy API in the code

Replace mentioning of legacy API by the latest one.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230112134849.59534-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: rt3883: add proper function muxing binding

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-7-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: rt305x: add proper function muxing binding

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-6-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: rt2880: add proper function muxing binding

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-5-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt7621: add proper function muxing binding

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-4-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: mt7620: add proper function muxing binding

Not every function can be muxed to a group. Add proper binding which
documents which function can be muxed to a group or set of groups.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-3-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: ralink: rename variables which point out the pin group

These variables define a list of functions which can be muxed to the pin
group which the name of the pin group was originally intended to be pointed
out on the name of the said variables.

Therefore, rename "func" to "grp" across all subdrivers where this applies.

Fixes: 18653d4bd8ab ("pinctrl: ralink: rename variable names for functions on MT7620 and MT7621")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20221231160849.40544-2-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: sx150x: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-512-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: allow nine interrupts on SM6350

Almost all Qualcomm SoC Top Level Mode Multiplexers come with only
summary interrupt.  SM6350 is different because downstream and upstream
DTS have nine of the interrupts.  Allow such variation.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sm8350-tlmm: correct pins pattern

SM8350 TLMM pin controller has GPIOs 0-202.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sm6350-tlmm: correct pins pattern

SM6350 TLMM pin controller has GPIOs 0-155.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sm8350-tlmm: add gpio-line-names

Allow gpio-line-names property (quite commonly used) and constrain
gpio-reserved-ranges:

  sm8350-sony-xperia-sagami-pdx215.dtb: pinctrl@f100000: 'gpio-line-names' does not match any of the regexes: '-state$', 'pinctrl-[0-9]+'

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sm6350-tlmm: add gpio-line-names

Allow gpio-line-names property (quite commonly used) and constrain
gpio-reserved-ranges.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: add input-enable and bias-bus-hold

Allow bias-bus-hold and input-enable properties (already used in
SC8280XP LPASS LPI nodes):

  sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'

Link: https://lore.kernel.org/r/20221230135645.56401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sc8280xp-lpass-lpi: correct pins pattern

SC8280XP LPASS LPI pin controller has GPIO 0-18:

  sa8540p-ride.dtb: pinctrl@33c0000: tx-swr-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'bias-bus-hold' does not match any of the regexes: 'pinctrl-[0-9]+'
    'gpio2' does not match '^gpio([0-1]|1[0-8])$'

Fixes: 958bb025f5b3 ("dt-bindings: pinctrl: qcom: Add sc8280xp lpass lpi pinctrl bindings")
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221230135645.56401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sdm845-pinctrl: add GPIO hogs

Allow GPIO hogs in pin controller node.  qcom/sdm845-cheza.dtsi already
uses it.

Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221121081221.30745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

dt-bindings: pinctrl: qcom,sm8450-lpass-lpi: add input-enable and bias-bus-hold

Allow bias-bus-hold and input-enable properties (already used in SM8450):

  sm8450-qrd.dtb: pinctrl@3440000: dmic02-default-state: 'oneOf' conditional failed, one must be fixed:
    'pins' is a required property
    'function' is a required property
    'clk-pins', 'data-pins' do not match any of the regexes: 'pinctrl-[0-9]+'
    'input-enable' does not match any of the regexes: 'pinctrl-[0-9]+'

Compact the properties which are just set to true for readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221222161420.172824-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,sm8450-tlmm: correct gpio-line-names size

The SM8450 has GPIOs from 0 to 209, so 210 in total:

  sm8450-sony-xperia-nagara-pdx223.dtb: pinctrl@f100000: gpio-line-names:
    ['NC', 'NC', 'NC', 'NC', 'WLC_I2C_SDA', 'WLC_I2C_SCL', ...
     'APPS_I2C_0_SDA', 'APPS_I2C_0_SCL', 'CCI_I2C3_SDA', 'CCI_I2C3_SCL'] is too long

Fixes: 9779ed30f92c ("dt-bindings: pinctrl: qcom,sm8450-pinctrl: add gpio-line-names")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221223132226.81340-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: pinmux: Drop duplicate error message in pinmux_select()

pinctrl_get_group_selector() prints an error message when group
is not found in the list. No need to repeat this in the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20230109132719.86009-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mcp23s08: Convert to i2c's .probe_new()

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221118224540.619276-511-uwe@kleine-koenig.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: msm8226: Add General Purpose clocks

Add support for the general purpose clocks that are found on MSM8226.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Co-developed-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Link: https://lore.kernel.org/r/20230106114403.275865-3-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: msm8226: Add General Purpose clocks

Document the general purpose clock functions that are found on MSM8226.

Signed-off-by: Matti Lehtimäki <matti.lehtimaki@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230106114403.275865-2-matti.lehtimaki@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: imx8m: Integrate duplicated i.MX 8M schemas

The i.MX8MM/N/P/Q IOMUXC schemas are basically the same, it does not to
have four schemas for almost the same binding.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230104021430.3503497-1-peng.fan@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: spmi-gpio: add support for pm8550 & pmr735d gpio control

Add support for the pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d
gpio controllers providing GPIO control over SPMI.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-3-b839bf2d558a@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom,pmic-gpio: document pm8550, pm8550b, pm8550ve, pm8550vs, pmk8550 & pmr735d

Document compatible, pin count & pin names for pm8550, pm8550b, pm8550ve,
pm8550vs, pmk8550 & pmr735d SPMI GPIO controllers.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221114-narmstrong-sm8550-upstream-spmi-v2-2-b839bf2d558a@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: rockchip: Fix refcount leak in rockchip_pinctrl_parse_groups

of_find_node_by_phandle() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d3e5116119bd ("pinctrl: add pinctrl driver for Rockchip SoCs")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102112845.3982407-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain

of_irq_find_parent() returns a node pointer with refcount incremented,
We should use of_node_put() on it when not needed anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: d86f4d71e42a ("pinctrl: stm32: check irq controller availability at probe")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20230102082503.3944927-1-linmq006@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: pinctrl-msm8976: Correct function names for wcss pins

Adjust names of function for wcss pins, also fix third gpio in bt group.

Fixes: bcd11493f0ab ("pinctrl: qcom: Add a pinctrl driver for MSM8976 and 8956")
Signed-off-by: Adam Skladowski <a39.skl@gmail.com>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20221231164250.74550-1-a39.skl@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: qcom: Add SM8550 pinctrl driver

Add pinctrl driver for TLMM block found in SM8550 SoC.

Co-developed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221230203637.2539900-3-abel.vesa@linaro.org
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: Add SM8550 pinctrl

Add device tree binding Documentation details for Qualcomm SM8550
TLMM device

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221230203637.2539900-2-abel.vesa@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: intel: Get rid of unused members in struct intel_function

The driver has been converted to a generic data type and macro for
the pin function definition, hence get rid of not used members in
the struct intel_function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: moorefield: Convert to use new memeber in struct intel_function

Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: merrifield: Convert to use new memeber in struct intel_function

Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: lynxpoint: Convert to use new memeber in struct intel_function

Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: cherryview: Convert to use new memeber in struct intel_function

Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: baytrail: Convert to use new memeber in struct intel_function

Convert driver to use generic data type and hence a new member in
the struct intel_function. No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Make use of struct pinfunction and PINCTRL_PINFUNCTION()

Since pin control provides a generic data type and a macro for
the pin function definition, use them in the Intel driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: Introduce struct pinfunction and PINCTRL_PINFUNCTION() macro

There are many pin control drivers define their own data type for
pin function representation which is the same or embed the same data
as newly introduced one. Provide the data type and convenient macro
for all pin control drivers.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver

Add pin control driver for the TLMM block found in the QDU1000
and QRU1000 SoC.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-3-quic_molvera@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl

Add device tree bindings for QDU1000 and QRU1000 TLMM devices.

Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20221216230852.21691-2-quic_molvera@quicinc.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

dt-bindings: pinctrl: renesas: Add RZ/G2L POEG binding

Add device tree bindings for the RZ/G2L Port Output Enable for GPT (POEG).

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221215213206.56666-2-biju.das.jz@bp.renesas.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: at91: convert to NOIRQ_SYSTEM_SLEEP_PM_OPS

With the old SET_NOIRQ_SYSTEM_SLEEP_PM_OPS, some configs result in a
build warning:

drivers/pinctrl/pinctrl-at91.c:1668:12: error: 'at91_gpio_resume' defined but not used [-Werror=unused-function]
 1668 | static int at91_gpio_resume(struct device *dev)
      |            ^~~~~~~~~~~~~~~~
drivers/pinctrl/pinctrl-at91.c:1650:12: error: 'at91_gpio_suspend' defined but not used [-Werror=unused-function]
 1650 | static int at91_gpio_suspend(struct device *dev)
      |            ^~~~~~~~~~~~~~~~~

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Ryan Wanner <Ryan.Wanner@microchip.com>
Link: https://lore.kernel.org/r/20221215164301.934805-1-arnd@kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: mxs: avoid defines prefixed with CONFIG

Defines prefixed with "CONFIG" should be limited to proper Kconfig options,
that are introduced in a Kconfig file.

Here, expressions to convert pin configurations to booleans for pull-up,
voltage and mA are macro definitions that begin with "CONFIG".

To avoid defines prefixed with "CONFIG", rename these defines to begin with
"PIN_CONFIG" instead.

No functional change.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20221215092128.3954-1-lukas.bulwahn@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: thunderbay: Drop empty platform remove function

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221213182322.962345-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: da850-pupd: Drop empty platform remove function

A remove callback just returning 0 is equivalent to no remove callback
at all. So drop the useless function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221213182125.929303-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: amd: Add Z-state wake control bits

GPIO registers include Bit 27 for WakeCntrlZ used to enable wake in
Z state. Hence add Z-state wake control bits to debugfs output to
debug and analyze Z-states problems.

Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Guruvendra Punugupati <Guruvendra.Punugupati@amd.com>
Link: https://lore.kernel.org/r/20221208093704.1151928-1-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

pinctrl: intel: Define maximum pad number in the group

Instead of using hard coded magic number here and there,
define maximum pad number in the group in newly added
INTEL_PINCTRL_MAX_GPP_SIZE.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Use same order of bit fields for PADCFG2

PADCFG0 and PADCFG1 are ordered from MSB to LSB, do the same
for PADCFG2 bit fields. No functional changes intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Add ~4k bias support

All versions that have 20k and 5k resistance, i.e. all that
the driver supports, may support ~4k when the above mentioned
are connected in parallel. Add such a support.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Add definitions to all possible biases

Add definitions to all possible biases, i.e. add ~800 Ohms,
~952 Ohms, ~4 kOhms.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Deduplicate some code in intel_config_set_pull()

First part is to assign default argument for all cases, since
bias disablement doesn't use it anyway.

Second part is to clear all bits in the bias setting and
depending on the argument and parameter set them as asked.

While at it, add break statement to the default cases.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Add default case to intel_config_set_pull()

For the sake of symmetry with intel_config_get_pull(), add
a default case to the outer switch.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Convert to generic_handle_domain_irq()

Replace construct that matches generic_handle_irq(irq_find_mapping())
to a single call to generic_handle_domain_irq().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: intel: Always use gpp_num_padown_regs in the main driver

For the size-based communities, always use gpp_num_padown_regs,
which is now provided explicitly via INTEL_COMMUNITY_SIZE() macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: sunrisepoint: Replace SPT_COMMUNITY() by INTEL_COMMUNITY_*()

Use INTEL_COMMUNITY_*() common macro instead custom SPT_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: tigerlake: Replace TGL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom TGL_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: meteorlake: Replace MTL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom MTL_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: lewisburg: Replace LBG_COMMUNITY() by INTEL_COMMUNITY_SIZE()

Use INTEL_COMMUNITY_SIZE() common macro instead custom LBG_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: lakefield: Replace LKF_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom LKF_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: jasperlake: Replace JSL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom JSL_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: icelake: Replace ICL_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom ICL_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: geminilake: Replace GLK_COMMUNITY() by INTEL_COMMUNITY_SIZE()

Use INTEL_COMMUNITY_SIZE() common macro instead custom GLK_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

pinctrl: emmitsburg: Replace EBG_COMMUNITY() by INTEL_COMMUNITY_GPPS()

Use INTEL_COMMUNITY_GPPS() common macro instead custom EBG_COMMUNITY().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>