Russell King (Oracle) [Fri, 16 Jun 2023 12:07:29 +0000 (13:07 +0100)]
net: dsa: mt7530: update PCS driver to use neg_mode
Update mt7530's embedded PCS driver to use neg_mode, even though it
makes no use of it or the "mode" argument. This makes the driver
consistent with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Ej-00EaGR-Fk@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:07:24 +0000 (13:07 +0100)]
net: dsa: b53: update PCS driver to use neg_mode
Update B53's embedded PCS driver to use neg_mode, even though it makes
no use of it or the "mode" argument. This makes the driver consistent
with converted drivers.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1qA8Ee-00EaGL-Az@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:07:19 +0000 (13:07 +0100)]
net: sparx5: update PCS driver to use neg_mode
Update Sparx5's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EZ-00EaGF-6F@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:07:14 +0000 (13:07 +0100)]
net: qca8k: update PCS driver to use neg_mode
Update qca8k's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EU-00EaG9-1l@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:07:08 +0000 (13:07 +0100)]
net: prestera: update PCS driver to use neg_mode
Update prestera's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Acked-by: Elad Nachman <enachman@marvell.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EO-00EaG3-TR@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:07:03 +0000 (13:07 +0100)]
net: mvpp2: update PCS driver to use neg_mode
Update mvpp2's embedded PCS drivers to use neg_mode rather than the
mode argument, remembering to update the ACPI path as well. As there
are no pcs_link_up() methods, this only affects the two pcs_config()
methods.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EJ-00EaFx-P6@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:58 +0000 (13:06 +0100)]
net: mvneta: update PCS driver to use neg_mode
Update mvneta's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8EE-00EaFr-Kx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:53 +0000 (13:06 +0100)]
net: lan966x: update PCS driver to use neg_mode
Update lan966x's embedded PCS driver to use neg_mode rather than the
mode argument. As there is no pcs_link_up() method, this only affects
the pcs_config() method.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8E9-00EaFl-GN@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:48 +0000 (13:06 +0100)]
net: pcs: lynx: update PCS driver to use neg_mode
Update the Lynx PCS driver to use neg_mode rather than the mode
argument. This ensures that the link_up() method will always program
the speed and duplex when negotiation is disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8E4-00EaFf-Bf@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:43 +0000 (13:06 +0100)]
net: pcs: lynxi: update PCS driver to use neg_mode
Update the Lynxi PCS driver to use neg_mode rather than the mode
argument. This ensures that the link_up() method will always program
the speed and duplex when negotiation is disabled.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dz-00EaFY-5A@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:37 +0000 (13:06 +0100)]
net: pcs: xpcs: update PCS driver to use neg_mode
Update xpcs to use neg_mode to configure whether inband negotiation
should be used. We need to update sja1105 as well as that directly
calls into the XPCS driver's config function.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dt-00EaFS-W9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:32 +0000 (13:06 +0100)]
net: phylink: pass neg_mode into phylink_mii_c22_pcs_config()
Convert fman_dtsec, xilinx_axienet and pcs-lynx to pass the neg_mode
into phylink_mii_c22_pcs_config(). Where appropriate, drivers are
updated to have neg_mode passed into their pcs_config() and
pcs_link_up() functions. For other drivers, we just hoist the call
to phylink_pcs_neg_mode() to their pcs_config() method out of
phylink_mii_c22_pcs_config().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Do-00EaFM-Ra@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:27 +0000 (13:06 +0100)]
net: phylink: convert phylink_mii_c22_pcs_config() to neg_mode
Use phylink_pcs_neg_mode() for phylink_mii_c22_pcs_config(). This
results in no functional change.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8Dj-00EaFG-Mt@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King (Oracle) [Fri, 16 Jun 2023 12:06:22 +0000 (13:06 +0100)]
net: phylink: add PCS negotiation mode
PCS have to work out whether they should enable PCS negotiation by
looking at the "mode" and "interface" arguments, and the Autoneg bit
in the advertising mask.
This leads to some complex logic, so lets pull that out into phylink
and instead pass a "neg_mode" argument to the PCS configuration and
link up methods, instead of the "mode" argument.
In order to transition drivers, add a "neg_mode" flag to the phylink
PCS structure to PCS can indicate whether they want to be passed the
neg_mode or the old mode argument.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1qA8De-00EaFA-Ht@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 23 Jun 2023 02:38:46 +0000 (19:38 -0700)]
Merge branch 'fix-comment-typos-about-transmit'
Yueh-Shun Li says:
====================
Fix comment typos about "transmit"
Fix typos about "transmit" missing the first "s"
found by searching with keyword "tram" in the first 7
patches.
====================
Link: https://lore.kernel.org/r/20230622012627.15050-1-shamrocklee@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yueh-Shun Li [Thu, 22 Jun 2023 01:26:33 +0000 (01:26 +0000)]
net/tls: fix comment typo
Spell "retransmit" properly.
Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-7-shamrocklee@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yueh-Shun Li [Thu, 22 Jun 2023 01:26:31 +0000 (01:26 +0000)]
tcp: fix comment typo
Spell "transmissions" properly.
Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-6-shamrocklee@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yueh-Shun Li [Thu, 22 Jun 2023 01:26:25 +0000 (01:26 +0000)]
i40e, xsk: fix comment typo
Spell "transmission" properly.
Found by searching for keyword "tranm".
Signed-off-by: Yueh-Shun Li <shamrocklee@posteo.net>
Link: https://lore.kernel.org/r/20230622012627.15050-3-shamrocklee@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Fri, 23 Jun 2023 01:40:38 +0000 (18:40 -0700)]
Merge git://git./linux/kernel/git/netdev/net
Cross-merge networking fixes after downstream PR.
Conflicts:
tools/testing/selftests/net/fcnal-test.sh
d7a2fc1437f7 ("selftests: net: fcnal-test: check if FIPS mode is enabled")
dd017c72dde6 ("selftests: fcnal: Test SO_DONTROUTE on TCP sockets.")
https://lore.kernel.org/all/
5007b52c-dd16-dbf6-8d64-
b9701bfa498b@tessares.net/
https://lore.kernel.org/all/
20230619105427.
4a0df9b3@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Fri, 23 Jun 2023 00:59:51 +0000 (17:59 -0700)]
Merge tag 'net-6.4-rc8' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from ipsec, bpf, mptcp and netfilter.
Current release - regressions:
- netfilter: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
- eth: mlx5e:
- fix scheduling of IPsec ASO query while in atomic
- free IRQ rmap and notifier on kernel shutdown
Current release - new code bugs:
- phy: manual remove LEDs to ensure correct ordering
Previous releases - regressions:
- mptcp: fix possible divide by zero in recvmsg()
- dsa: revert "net: phy: dp83867: perform soft reset and retain
established link"
Previous releases - always broken:
- sched: netem: acquire qdisc lock in netem_change()
- bpf:
- fix verifier id tracking of scalars on spill
- fix NULL dereference on exceptions
- accept function names that contain dots
- netfilter: disallow element updates of bound anonymous sets
- mptcp: ensure listener is unhashed before updating the sk status
- xfrm:
- add missed call to delete offloaded policies
- fix inbound ipv4/udp/esp packets to UDPv6 dualstack sockets
- selftests: fixes for FIPS mode
- dsa: mt7530: fix multiple CPU ports, BPDU and LLDP handling
- eth: sfc: use budget for TX completions
Misc:
- wifi: iwlwifi: add support for SO-F device with PCI id 0x7AF0"
* tag 'net-6.4-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (74 commits)
revert "net: align SO_RCVMARK required privileges with SO_MARK"
net: wwan: iosm: Convert single instance struct member to flexible array
sch_netem: acquire qdisc lock in netem_change()
selftests: forwarding: Fix race condition in mirror installation
wifi: mac80211: report all unusable beacon frames
mptcp: ensure listener is unhashed before updating the sk status
mptcp: drop legacy code around RX EOF
mptcp: consolidate fallback and non fallback state machine
mptcp: fix possible list corruption on passive MPJ
mptcp: fix possible divide by zero in recvmsg()
mptcp: handle correctly disconnect() failures
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
Revert "net: phy: dp83867: perform soft reset and retain established link"
net: mdio: fix the wrong parameters
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
...
Linus Torvalds [Fri, 23 Jun 2023 00:54:10 +0000 (17:54 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Correctly save/restore PMUSERNR_EL0 when host userspace is using
PMU counters directly
- Fix GICv2 emulation on GICv3 after the locking rework
- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
document why
Generic:
- Avoid setting page table entries pointing to a deleted memslot if a
host page table entry is changed concurrently with the deletion"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Avoid illegal stage2 mapping on invalid memory slot
KVM: arm64: Use raw_smp_processor_id() in kvm_pmu_probe_armpmu()
KVM: arm64: Restore GICv2-on-GICv3 functionality
KVM: arm64: PMU: Don't overwrite PMUSERENR with vcpu loaded
KVM: arm64: PMU: Restore the host's PMUSERENR_EL0
Linus Torvalds [Fri, 23 Jun 2023 00:49:40 +0000 (17:49 -0700)]
Merge tag 'powerpc-6.4-5' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Disable IRQs when switching mm in exit_lazy_flush_tlb() called from
exit_mmap()
Thanks to Nicholas Piggin and Sachin Sant.
* tag 'powerpc-6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/radix: Fix exit lazy tlb mm switch with irqs enabled
Linus Torvalds [Fri, 23 Jun 2023 00:47:07 +0000 (17:47 -0700)]
Merge tag 'pci-v6.4-fixes-2' of git://git./linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Transfer Intel LGM GW PCIe maintenance from Rahul Tanwar to Chuanhua
Lei (Zhu YiXin)
* tag 'pci-v6.4-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Chuanhua Lei as Intel LGM GW PCIe maintainer
Linus Torvalds [Fri, 23 Jun 2023 00:42:07 +0000 (17:42 -0700)]
Merge tag 'mmc-v6.4-rc6' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
- Fix support for deferred probing for several host drivers
- litex_mmc: Use async probe as it's common for all mmc hosts
- meson-gx: Fix bug when scheduling while atomic
- mmci_stm32: Fix max busy timeout calculation
- sdhci-msm: Disable broken 64-bit DMA on MSM8916
* tag 'mmc-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: usdhi60rol0: fix deferred probing
mmc: sunxi: fix deferred probing
mmc: sh_mmcif: fix deferred probing
mmc: sdhci-spear: fix deferred probing
mmc: sdhci-acpi: fix deferred probing
mmc: owl: fix deferred probing
mmc: omap_hsmmc: fix deferred probing
mmc: omap: fix deferred probing
mmc: mvsdio: fix deferred probing
mmc: mtk-sd: fix deferred probing
mmc: meson-gx: fix deferred probing
mmc: bcm2835: fix deferred probing
mmc: litex_mmc: set PROBE_PREFER_ASYNCHRONOUS
mmc: meson-gx: remove redundant mmc_request_done() call from irq context
mmc: mmci: stm32: fix max busy timeout calculation
mmc: sdhci-msm: Disable broken 64-bit DMA on MSM8916
Linus Torvalds [Fri, 23 Jun 2023 00:38:11 +0000 (17:38 -0700)]
Merge tag 'platform-drivers-x86-v6.4-5' of git://git./linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Hans de Goede:
"One small fix for an AMD PMF driver issue which is causing issues for
users of just released AMD laptop models"
* tag 'platform-drivers-x86-v6.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/amd/pmf: Register notify handler only if SPS is enabled
Linus Torvalds [Fri, 23 Jun 2023 00:32:34 +0000 (17:32 -0700)]
Merge tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux
Pull io_uring fixes from Jens Axboe:
"A fix for a race condition with poll removal and linked timeouts, and
then a few followup fixes/tweaks for the msg_control patch from last
week.
Not super important, particularly the sparse fixup, as it was broken
before that recent commit. But let's get it sorted for real for this
release, rather than just have it broken a bit differently"
* tag 'io_uring-6.4-2023-06-21' of git://git.kernel.dk/linux:
io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
io_uring/net: disable partial retries for recvmsg with cmsg
io_uring/net: clear msg_controllen on partial sendmsg retry
io_uring/poll: serialize poll linked timer start with poll removal
Linus Torvalds [Fri, 23 Jun 2023 00:27:16 +0000 (17:27 -0700)]
Merge tag 'cgroup-for-6.4-rc7-fixes' of git://git./linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
"It's late but here are two bug fixes. Both fix problems which can be
severe but are very confined in scope. The risk to most use cases
should be minimal.
- Fix for an old bug which triggers if a cgroup subsystem is
remounted to a different hierarchy while someone is reading its
cgroup.procs/tasks file. The risk is pretty low given how seldom
cgroup subsystems are moved across hierarchies.
- We moved cpus_read_lock() outside of cgroup internal locks a while
ago but forgot to update the legacy_freezer leading to lockdep
triggers. Fixed"
* tag 'cgroup-for-6.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Do not corrupt task iteration when rebinding subsystem
cgroup,freezer: hold cpu_hotplug_lock before freezer_mutex in freezer_css_{online,offline}()
Paolo Bonzini [Thu, 22 Jun 2023 19:28:26 +0000 (15:28 -0400)]
Merge tag 'kvmarm-fixes-6.4-4' of git://git./linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.4, take #4
- Correctly save/restore PMUSERNR_EL0 when host userspace is using
PMU counters directly
- Fix GICv2 emulation on GICv3 after the locking rework
- Don't use smp_processor_id() in kvm_pmu_probe_armpmu(), and
document why...
Gavin Shan [Thu, 15 Jun 2023 05:42:59 +0000 (15:42 +1000)]
KVM: Avoid illegal stage2 mapping on invalid memory slot
We run into guest hang in edk2 firmware when KSM is kept as running on
the host. The edk2 firmware is waiting for status 0x80 from QEMU's pflash
device (TYPE_PFLASH_CFI01) during the operation of sector erasing or
buffered write. The status is returned by reading the memory region of
the pflash device and the read request should have been forwarded to QEMU
and emulated by it. Unfortunately, the read request is covered by an
illegal stage2 mapping when the guest hang issue occurs. The read request
is completed with QEMU bypassed and wrong status is fetched. The edk2
firmware runs into an infinite loop with the wrong status.
The illegal stage2 mapping is populated due to same page sharing by KSM
at (C) even the associated memory slot has been marked as invalid at (B)
when the memory slot is requested to be deleted. It's notable that the
active and inactive memory slots can't be swapped when we're in the middle
of kvm_mmu_notifier_change_pte() because kvm->mn_active_invalidate_count
is elevated, and kvm_swap_active_memslots() will busy loop until it reaches
to zero again. Besides, the swapping from the active to the inactive memory
slots is also avoided by holding &kvm->srcu in __kvm_handle_hva_range(),
corresponding to synchronize_srcu_expedited() in kvm_swap_active_memslots().
CPU-A CPU-B
----- -----
ioctl(kvm_fd, KVM_SET_USER_MEMORY_REGION)
kvm_vm_ioctl_set_memory_region
kvm_set_memory_region
__kvm_set_memory_region
kvm_set_memslot(kvm, old, NULL, KVM_MR_DELETE)
kvm_invalidate_memslot
kvm_copy_memslot
kvm_replace_memslot
kvm_swap_active_memslots (A)
kvm_arch_flush_shadow_memslot (B)
same page sharing by KSM
kvm_mmu_notifier_invalidate_range_start
:
kvm_mmu_notifier_change_pte
kvm_handle_hva_range
__kvm_handle_hva_range
kvm_set_spte_gfn (C)
:
kvm_mmu_notifier_invalidate_range_end
Fix the issue by skipping the invalid memory slot at (C) to avoid the
illegal stage2 mapping so that the read request for the pflash's status
is forwarded to QEMU and emulated by it. In this way, the correct pflash's
status can be returned from QEMU to break the infinite loop in the edk2
firmware.
We tried a git-bisect and the first problematic commit is
cd4c71835228 ("
KVM: arm64: Convert to the gfn-based MMU notifier callbacks"). With this,
clean_dcache_guest_page() is called after the memory slots are iterated
in kvm_mmu_notifier_change_pte(). clean_dcache_guest_page() is called
before the iteration on the memory slots before this commit. This change
literally enlarges the racy window between kvm_mmu_notifier_change_pte()
and memory slot removal so that we're able to reproduce the issue in a
practical test case. However, the issue exists since commit
d5d8184d35c9
("KVM: ARM: Memory virtualization setup").
Cc: stable@vger.kernel.org # v3.9+
Fixes:
d5d8184d35c9 ("KVM: ARM: Memory virtualization setup")
Reported-by: Shuai Hu <hshuai@redhat.com>
Reported-by: Zhenyu Zhang <zhenyzha@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Message-Id: <
20230615054259.14911-1-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Abeni [Thu, 22 Jun 2023 12:39:06 +0000 (14:39 +0200)]
Merge tag 'nf-23-06-21' of git://git./linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
This is v3, including a crash fix for patch 01/14.
The following patchset contains Netfilter/IPVS fixes for net:
1) Fix UDP segmentation with IPVS tunneled traffic, from Terin Stock.
2) Fix chain binding transaction logic, add a bound flag to rule
transactions. Remove incorrect logic in nft_data_hold() and
nft_data_release().
3) Add a NFT_TRANS_PREPARE_ERROR deactivate state to deal with releasing
the set/chain as a follow up to
1240eb93f061 ("netfilter: nf_tables:
incorrect error path handling with NFT_MSG_NEWRULE")
4) Drop map element references from preparation phase instead of
set destroy path, otherwise bogus EBUSY with transactions such as:
flush chain ip x y
delete chain ip x w
where chain ip x y contains jump/goto from set elements.
5) Pipapo set type does not regard generation mask from the walk
iteration.
6) Fix reference count underflow in set element reference to
stateful object.
7) Several patches to tighten the nf_tables API:
- disallow set element updates of bound anonymous set
- disallow unbound anonymous set/chain at the end of transaction.
- disallow updates of anonymous set.
- disallow timeout configuration for anonymous sets.
8) Fix module reference leak in chain updates.
9) Fix nfnetlink_osf module autoload.
10) Fix deletion of basechain when NFTA_CHAIN_HOOK is specified as
in iptables-nft.
This Netfilter batch is larger than usual at this stage, I am aware we
are fairly late in the -rc cycle, if you prefer to route them through
net-next, please let me know.
netfilter pull request 23-06-21
* tag 'nf-23-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Fix for deleting base chains with payload
netfilter: nfnetlink_osf: fix module autoload
netfilter: nf_tables: drop module reference after updating chain
netfilter: nf_tables: disallow timeout for anonymous sets
netfilter: nf_tables: disallow updates of anonymous sets
netfilter: nf_tables: reject unbound chain set before commit phase
netfilter: nf_tables: reject unbound anonymous set before commit phase
netfilter: nf_tables: disallow element updates of bound anonymous sets
netfilter: nf_tables: fix underflow in object reference counter
netfilter: nft_set_pipapo: .walk does not deal with generations
netfilter: nf_tables: drop map element references from preparation phase
netfilter: nf_tables: add NFT_TRANS_PREPARE_ERROR to deal with bound set/chain
netfilter: nf_tables: fix chain binding transaction logic
ipvs: align inner_mac_header for encapsulation
====================
Link: https://lore.kernel.org/r/20230621100731.68068-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Maciej Żenczykowski [Sun, 18 Jun 2023 10:31:30 +0000 (03:31 -0700)]
revert "net: align SO_RCVMARK required privileges with SO_MARK"
This reverts commit
1f86123b9749 ("net: align SO_RCVMARK required
privileges with SO_MARK") because the reasoning in the commit message
is not really correct:
SO_RCVMARK is used for 'reading' incoming skb mark (via cmsg), as such
it is more equivalent to 'getsockopt(SO_MARK)' which has no priv check
and retrieves the socket mark, rather than 'setsockopt(SO_MARK) which
sets the socket mark and does require privs.
Additionally incoming skb->mark may already be visible if
sysctl_fwmark_reflect and/or sysctl_tcp_fwmark_accept are enabled.
Furthermore, it is easier to block the getsockopt via bpf
(either cgroup setsockopt hook, or via syscall filters)
then to unblock it if it requires CAP_NET_RAW/ADMIN.
On Android the socket mark is (among other things) used to store
the network identifier a socket is bound to. Setting it is privileged,
but retrieving it is not. We'd like unprivileged userspace to be able
to read the network id of incoming packets (where mark is set via
iptables [to be moved to bpf])...
An alternative would be to add another sysctl to control whether
setting SO_RCVMARK is privilged or not.
(or even a MASK of which bits in the mark can be exposed)
But this seems like over-engineering...
Note: This is a non-trivial revert, due to later merged commit
e42c7beee71d
("bpf: net: Consider has_current_bpf_ctx() when testing capable() in sk_setsockopt()")
which changed both 'ns_capable' into 'sockopt_ns_capable' calls.
Fixes:
1f86123b9749 ("net: align SO_RCVMARK required privileges with SO_MARK")
Cc: Larysa Zaremba <larysa.zaremba@intel.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Eyal Birger <eyal.birger@gmail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Patrick Rohr <prohr@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20230618103130.51628-1-maze@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Kees Cook [Tue, 20 Jun 2023 19:42:38 +0000 (12:42 -0700)]
net: wwan: iosm: Convert single instance struct member to flexible array
struct mux_adth actually ends with multiple struct mux_adth_dg members.
This is seen both in the comments about the member:
/**
* struct mux_adth - Structure of the Aggregated Datagram Table Header.
...
* @dg: datagramm table with variable length
*/
and in the preparation for populating it:
adth_dg_size = offsetof(struct mux_adth, dg) +
ul_adb->dg_count[i] * sizeof(*dg);
...
adth_dg_size -= offsetof(struct mux_adth, dg);
memcpy(&adth->dg, ul_adb->dg[i], adth_dg_size);
This was reported as a run-time false positive warning:
memcpy: detected field-spanning write (size 16) of single field "&adth->dg" at drivers/net/wwan/iosm/iosm_ipc_mux_codec.c:852 (size 8)
Adjust the struct mux_adth definition and associated sizeof() math; no binary
output differences are observed in the resulting object file.
Reported-by: Florian Klink <flokli@flokli.de>
Closes: https://lore.kernel.org/lkml/
dbfa25f5-64c8-5574-4f5d-
0151ba95d232@gmail.com/
Fixes:
1f52d7b62285 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Cc: M Chetan Kumar <m.chetan.kumar@intel.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: Intel Corporation <linuxwwan@intel.com>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620194234.never.023-kees@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet [Tue, 20 Jun 2023 18:44:25 +0000 (18:44 +0000)]
sch_netem: acquire qdisc lock in netem_change()
syzbot managed to trigger a divide error [1] in netem.
It could happen if q->rate changes while netem_enqueue()
is running, since q->rate is read twice.
It turns out netem_change() always lacked proper synchronization.
[1]
divide error: 0000 [#1] SMP KASAN
CPU: 1 PID: 7867 Comm: syz-executor.1 Not tainted 6.1.30-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
RIP: 0010:div64_u64 include/linux/math64.h:69 [inline]
RIP: 0010:packet_time_ns net/sched/sch_netem.c:357 [inline]
RIP: 0010:netem_enqueue+0x2067/0x36d0 net/sched/sch_netem.c:576
Code: 89 e2 48 69 da 00 ca 9a 3b 42 80 3c 28 00 4c 8b a4 24 88 00 00 00 74 0d 4c 89 e7 e8 c3 4f 3b fd 48 8b 4c 24 18 48 89 d8 31 d2 <49> f7 34 24 49 01 c7 4c 8b 64 24 48 4d 01 f7 4c 89 e3 48 c1 eb 03
RSP: 0018:
ffffc9000dccea60 EFLAGS:
00010246
RAX:
000001a442624200 RBX:
000001a442624200 RCX:
ffff888108a4f000
RDX:
0000000000000000 RSI:
000000000000070d RDI:
000000000000070d
RBP:
ffffc9000dcceb90 R08:
ffffffff849c5e26 R09:
fffffbfff10e1297
R10:
0000000000000000 R11:
dffffc0000000001 R12:
ffff888108a4f358
R13:
dffffc0000000000 R14:
0000001a8cd9a7ec R15:
0000000000000000
FS:
00007fa73fe18700(0000) GS:
ffff8881f6b00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fa73fdf7718 CR3:
000000011d36e000 CR4:
0000000000350ee0
Call Trace:
<TASK>
[<
ffffffff84714385>] __dev_xmit_skb net/core/dev.c:3931 [inline]
[<
ffffffff84714385>] __dev_queue_xmit+0xcf5/0x3370 net/core/dev.c:4290
[<
ffffffff84d22df2>] dev_queue_xmit include/linux/netdevice.h:3030 [inline]
[<
ffffffff84d22df2>] neigh_hh_output include/net/neighbour.h:531 [inline]
[<
ffffffff84d22df2>] neigh_output include/net/neighbour.h:545 [inline]
[<
ffffffff84d22df2>] ip_finish_output2+0xb92/0x10d0 net/ipv4/ip_output.c:235
[<
ffffffff84d21e63>] __ip_finish_output+0xc3/0x2b0
[<
ffffffff84d10a81>] ip_finish_output+0x31/0x2a0 net/ipv4/ip_output.c:323
[<
ffffffff84d10f14>] NF_HOOK_COND include/linux/netfilter.h:298 [inline]
[<
ffffffff84d10f14>] ip_output+0x224/0x2a0 net/ipv4/ip_output.c:437
[<
ffffffff84d123b5>] dst_output include/net/dst.h:444 [inline]
[<
ffffffff84d123b5>] ip_local_out net/ipv4/ip_output.c:127 [inline]
[<
ffffffff84d123b5>] __ip_queue_xmit+0x1425/0x2000 net/ipv4/ip_output.c:542
[<
ffffffff84d12fdc>] ip_queue_xmit+0x4c/0x70 net/ipv4/ip_output.c:556
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620184425.1179809-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Shyam Sundar S K [Thu, 22 Jun 2023 06:03:09 +0000 (11:33 +0530)]
platform/x86/amd/pmf: Register notify handler only if SPS is enabled
Power source notify handler is getting registered even when none of the
PMF feature in enabled leading to a crash.
...
[ 22.592162] Call Trace:
[ 22.592164] <TASK>
[ 22.592164] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592166] ? __warn+0x81/0x130
[ 22.592171] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592172] ? report_bug+0x171/0x1a0
[ 22.592175] ? prb_read_valid+0x1b/0x30
[ 22.592177] ? handle_bug+0x3c/0x80
[ 22.592178] ? exc_invalid_op+0x17/0x70
[ 22.592179] ? asm_exc_invalid_op+0x1a/0x20
[ 22.592182] ? rcu_note_context_switch+0x5e0/0x660
[ 22.592183] ? acpi_ut_delete_object_desc+0x86/0xb0
[ 22.592186] ? acpi_ut_update_ref_count.part.0+0x22d/0x930
[ 22.592187] __schedule+0xc0/0x1410
[ 22.592189] ? ktime_get+0x3c/0xa0
[ 22.592191] ? lapic_next_event+0x1d/0x30
[ 22.592193] ? hrtimer_start_range_ns+0x25b/0x350
[ 22.592196] schedule+0x5e/0xd0
[ 22.592197] schedule_hrtimeout_range_clock+0xbe/0x140
[ 22.592199] ? __pfx_hrtimer_wakeup+0x10/0x10
[ 22.592200] usleep_range_state+0x64/0x90
[ 22.592203] amd_pmf_send_cmd+0x106/0x2a0 [amd_pmf
bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592207] amd_pmf_update_slider+0x56/0x1b0 [amd_pmf
bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592210] amd_pmf_set_sps_power_limits+0x72/0x80 [amd_pmf
bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592213] amd_pmf_pwr_src_notify_call+0x49/0x90 [amd_pmf
bddfe0fe3712aaa99acce3d5487405c5213c6616]
[ 22.592216] notifier_call_chain+0x5a/0xd0
[ 22.592218] atomic_notifier_call_chain+0x32/0x50
...
Fix this by moving the registration of source change notify handler only
when SPS(Static Slider) is advertised as supported.
Reported-by: Allen Zhong <allen@atr.me>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217571
Fixes:
4c71ae414474 ("platform/x86/amd/pmf: Add support SPS PMF feature")
Tested-by: Patil Rajesh Reddy <Patil.Reddy@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Link: https://lore.kernel.org/r/20230622060309.310001-1-Shyam-sundar.S-k@amd.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Danielle Ratson [Tue, 20 Jun 2023 12:45:15 +0000 (14:45 +0200)]
selftests: forwarding: Fix race condition in mirror installation
When mirroring to a gretap in hardware the device expects to be
programmed with the egress port and all the encapsulating headers. This
requires the driver to resolve the path the packet will take in the
software data path and program the device accordingly.
If the path cannot be resolved (in this case because of an unresolved
neighbor), then mirror installation fails until the path is resolved.
This results in a race that causes the test to sometimes fail.
Fix this by setting the neighbor's state to permanent in a couple of
tests, so that it is always valid.
Fixes:
35c31d5c323f ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1d")
Fixes:
239e754af854 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/268816ac729cb6028c7a34d4dda6f4ec7af55333.1687264607.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Benjamin Berg [Wed, 21 Jun 2023 12:05:44 +0000 (14:05 +0200)]
wifi: mac80211: report all unusable beacon frames
Properly check for RX_DROP_UNUSABLE now that the new drop reason
infrastructure is used. Without this change, the comparison will always
be false as a more specific reason is given in the lower bits of result.
Fixes:
baa951a1c177 ("mac80211: use the new drop reasons infrastructure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20230621120543.412920-2-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 22 Jun 2023 05:45:59 +0000 (22:45 -0700)]
Merge branch 'mptcp-expose-more-info-and-small-improvements'
Matthieu Baerts says:
====================
mptcp: expose more info and small improvements
Patch 1-3/9 track and expose some aggregated data counters at the MPTCP
level: the number of retransmissions and the bytes that have been
transferred. The first patch prepares the work by moving where snd_una
is updated for fallback sockets while the last patch adds some tests to
cover the new code.
Patch 4-6/9 introduce a new getsockopt for SOL_MPTCP: MPTCP_FULL_INFO.
This new socket option allows to combine info from MPTCP_INFO,
MPTCP_TCPINFO and MPTCP_SUBFLOW_ADDRS socket options into one. It can be
needed to have all info in one because the path-manager can close and
re-create subflows between getsockopt() and fooling the accounting. The
first patch introduces a unique subflow ID to easily detect when
subflows are being re-created with the same 5-tuple while the last patch
adds some tests to cover the new code.
Please note that patch 5/9 ("mptcp: introduce MPTCP_FULL_INFO getsockopt")
can reveal a bug that were there for a bit of time, see [1]. A fix has
recently been fixed to netdev for the -net tree: "mptcp: ensure listener
is unhashed before updating the sk status", see [2]. There is no
conflicts between the two patches but it might be better to apply this
series after the one for -net and after having merged "net" into
"net-next".
Patch 7/9 is similar to commit
47867f0a7e83 ("selftests: mptcp: join:
skip check if MIB counter not supported") recently applied in the -net
tree but here it adapts the new code that is only in net-next (and it
fixes a merge conflict resolution which didn't have any impact).
Patch 8 and 9/9 are two simple refactoring. One to consolidate the
transition to TCP_CLOSE in mptcp_do_fastclose() and avoid duplicated
code. The other one reduces the scope of an argument passed to
mptcp_pm_alloc_anno_list() function.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Link: https://lore.kernel.org/netdev/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net/
====================
Link: https://lore.kernel.org/r/20230620-upstream-net-next-20230620-mptcp-expose-more-info-and-misc-v1-0-62b9444bfd48@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Geliang Tang [Tue, 20 Jun 2023 16:30:22 +0000 (18:30 +0200)]
mptcp: pass addr to mptcp_pm_alloc_anno_list
Pass addr parameter to mptcp_pm_alloc_anno_list() instead of entry. We
can reduce the scope, e.g. in mptcp_pm_alloc_anno_list(), we only access
"entry->addr", we can then restrict to the pointer to "addr" then.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:21 +0000 (18:30 +0200)]
mptcp: consolidate transition to TCP_CLOSE in mptcp_do_fastclose()
The MPTCP code always set the msk state to TCP_CLOSE before
calling performing the fast-close. Move such state transition in
mptcp_do_fastclose() to avoid some code duplication.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts [Tue, 20 Jun 2023 16:30:20 +0000 (18:30 +0200)]
selftests: mptcp: join: skip check if MIB counter not supported (part 2)
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP MIB counters introduced in commit
fc518953bc9c
("mptcp: add and use MIB counter infrastructure") and more later. The
MPTCP Join selftest heavily relies on these counters.
If a counter is not supported by the kernel, it is not displayed when
using 'nstat -z'. We can then detect that and skip the verification. A
new helper (get_counter()) has been added recently in the -net tree to
do the required checks and return an error if the counter is not
available.
This commit is similar to the one with the same title applied in the
-net tree but it modifies code only present in net-next for the moment,
see the Fixes commit below.
While at it, we can also remove the use of ${extra_msg} variable which
is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n'
parameter.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes:
0639fa230a21 ("selftests: mptcp: add explicit check for new mibs")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:19 +0000 (18:30 +0200)]
selftests: mptcp: add MPTCP_FULL_INFO testcase
Add a testcase explicitly triggering the newly introduce
MPTCP_FULL_INFO getsockopt.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Co-developed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:18 +0000 (18:30 +0200)]
mptcp: introduce MPTCP_FULL_INFO getsockopt
Some user-space applications want to monitor the subflows utilization.
Dumping the per subflow tcp_info is not enough, as the PM could close
and re-create the subflows under-the-hood, fooling the accounting.
Even checking the src/dst addresses used by each subflow could not
be enough, because new subflows could re-use the same address/port of
the just closed one.
This patch introduces a new socket option, allow dumping all the relevant
information all-at-once (everything, everywhere...), in a consistent
manner.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:17 +0000 (18:30 +0200)]
mptcp: add subflow unique id
The user-space need to properly account the data received/sent by
individual subflows. When additional subflows are created and/or
closed during the MPTCP socket lifetime, the information currently
exposed via MPTCP_TCPINFO are not enough: subflows are identified only
by the sequential position inside the info dumps, and that will change
with the above mentioned events.
To solve the above problem, this patch introduces a new subflow
identifier that is unique inside the given MPTCP socket scope.
The initial subflow get the id 1 and the other subflows get incremental
values at join time.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/388
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:16 +0000 (18:30 +0200)]
selftests: mptcp: explicitly tests aggregate counters
Update the existing sockopt test-case to do some basic checks
on the newly added counters.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:15 +0000 (18:30 +0200)]
mptcp: track some aggregate data counters
Currently there are no data transfer counters accounting for all
the subflows used by a given MPTCP socket. The user-space can compute
such figures aggregating the subflow info, but that is inaccurate
if any subflow is closed before the MPTCP socket itself.
Add the new counters in the MPTCP socket itself and expose them
via the existing diag and sockopt. While touching mptcp_diag_fill_info(),
acquire the relevant locks before fetching the msk data, to ensure
better data consistency
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/385
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:30:14 +0000 (18:30 +0200)]
mptcp: move snd_una update earlier for fallback socket
That will avoid an unneeded conditional in both the fast-path
and in the fallback case and will simplify a bit the next
patch.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Thu, 22 Jun 2023 05:44:59 +0000 (22:44 -0700)]
Merge branch 'mptcp-fixes-for-6-4'
Matthieu Baerts says:
====================
mptcp: fixes for 6.4
Patch 1 correctly handles disconnect() failures that can happen in some
specific cases: now the socket state is set as unconnected as expected.
That fixes an issue introduced in v6.2.
Patch 2 fixes a divide by zero bug in mptcp_recvmsg() with a fix similar
to a recent one from Eric Dumazet for TCP introducing sk_wait_pending
flag. It should address an issue present in MPTCP from almost the
beginning, from v5.9.
Patch 3 fixes a possible list corruption on passive MPJ even if the race
seems very unlikely, better be safe than sorry. The possible issue is
present from v5.17.
Patch 4 consolidates fallback and non fallback state machines to avoid
leaking some MPTCP sockets. The fix is likely needed for versions from
v5.11.
Patch 5 drops code that is no longer used after the introduction of
patch 4/6. This is not really a fix but this patch can probably land in
the -net tree as well not to leave unused code.
Patch 6 ensures listeners are unhashed before updating their sk status
to avoid possible deadlocks when diag info are going to be retrieved
with a lock. Even if it should not be visible with the way we are
currently getting diag info, the issue is present from v5.17.
====================
Link: https://lore.kernel.org/r/20230620-upstream-net-20230620-misc-fixes-for-v6-4-v1-0-f36aa5eae8b9@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:23 +0000 (18:24 +0200)]
mptcp: ensure listener is unhashed before updating the sk status
The MPTCP protocol access the listener subflow in a lockless
manner in a couple of places (poll, diag). That works only if
the msk itself leaves the listener status only after that the
subflow itself has been closed/disconnected. Otherwise we risk
deadlock in diag, as reported by Christoph.
Address the issue ensuring that the first subflow (the listener
one) is always disconnected before updating the msk socket status.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/407
Fixes:
b29fcfb54cd7 ("mptcp: full disconnect implementation")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:22 +0000 (18:24 +0200)]
mptcp: drop legacy code around RX EOF
Thanks to the previous patch -- "mptcp: consolidate fallback and non
fallback state machine" -- we can finally drop the "temporary hack"
used to detect rx eof.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:21 +0000 (18:24 +0200)]
mptcp: consolidate fallback and non fallback state machine
An orphaned msk releases the used resources via the worker,
when the latter first see the msk in CLOSED status.
If the msk status transitions to TCP_CLOSE in the release callback
invoked by the worker's final release_sock(), such instance of the
workqueue will not take any action.
Additionally the MPTCP code prevents scheduling the worker once the
socket reaches the CLOSE status: such msk resources will be leaked.
The only code path that can trigger the above scenario is the
__mptcp_check_send_data_fin() in fallback mode.
Address the issue removing the special handling of fallback socket
in __mptcp_check_send_data_fin(), consolidating the state machine
for fallback and non fallback socket.
Since non-fallback sockets do not send and do not receive data_fin,
the mptcp code can update the msk internal status to match the next
step in the SM every time data fin (ack) should be generated or
received.
As a consequence we can remove a bunch of checks for fallback from
the fastpath.
Fixes:
6e628cd3a8f7 ("mptcp: use mptcp release_cb for delayed tasks")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:20 +0000 (18:24 +0200)]
mptcp: fix possible list corruption on passive MPJ
At passive MPJ time, if the msk socket lock is held by the user,
the new subflow is appended to the msk->join_list under the msk
data lock.
In mptcp_release_cb()/__mptcp_flush_join_list(), the subflows in
that list are moved from the join_list into the conn_list under the
msk socket lock.
Append and removal could race, possibly corrupting such list.
Address the issue splicing the join list into a temporary one while
still under the msk data lock.
Found by code inspection, the race itself should be almost impossible
to trigger in practice.
Fixes:
3e5014909b56 ("mptcp: cleanup MPJ subflow list handling")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:19 +0000 (18:24 +0200)]
mptcp: fix possible divide by zero in recvmsg()
Christoph reported a divide by zero bug in mptcp_recvmsg():
divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 19978 Comm: syz-executor.6 Not tainted 6.4.0-rc2-gffcc7899081b #20
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:__tcp_select_window+0x30e/0x420 net/ipv4/tcp_output.c:3018
Code: 11 ff 0f b7 cd c1 e9 0c b8 ff ff ff ff d3 e0 89 c1 f7 d1 01 cb 21 c3 eb 17 e8 2e 83 11 ff 31 db eb 0e e8 25 83 11 ff 89 d8 99 <f7> 7c 24 04 29 d3 65 48 8b 04 25 28 00 00 00 48 3b 44 24 10 75 60
RSP: 0018:
ffffc90000a07a18 EFLAGS:
00010246
RAX:
000000000000ffd7 RBX:
000000000000ffd7 RCX:
0000000000040000
RDX:
0000000000000000 RSI:
000000000003ffff RDI:
0000000000040000
RBP:
000000000000ffd7 R08:
ffffffff820cf297 R09:
0000000000000001
R10:
0000000000000000 R11:
ffffffff8103d1a0 R12:
0000000000003f00
R13:
0000000000300000 R14:
ffff888101cf3540 R15:
0000000000180000
FS:
00007f9af4c09640(0000) GS:
ffff88813bd00000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000001b33824000 CR3:
000000012f241001 CR4:
0000000000170ee0
Call Trace:
<TASK>
__tcp_cleanup_rbuf+0x138/0x1d0 net/ipv4/tcp.c:1611
mptcp_recvmsg+0xcb8/0xdd0 net/mptcp/protocol.c:2034
inet_recvmsg+0x127/0x1f0 net/ipv4/af_inet.c:861
____sys_recvmsg+0x269/0x2b0 net/socket.c:1019
___sys_recvmsg+0xe6/0x260 net/socket.c:2764
do_recvmmsg+0x1a5/0x470 net/socket.c:2858
__do_sys_recvmmsg net/socket.c:2937 [inline]
__se_sys_recvmmsg net/socket.c:2953 [inline]
__x64_sys_recvmmsg+0xa6/0x130 net/socket.c:2953
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x47/0xa0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f9af58fc6a9
Code: 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 4f 37 0d 00 f7 d8 64 89 01 48
RSP: 002b:
00007f9af4c08cd8 EFLAGS:
00000246 ORIG_RAX:
000000000000012b
RAX:
ffffffffffffffda RBX:
00000000006bc050 RCX:
00007f9af58fc6a9
RDX:
0000000000000001 RSI:
0000000020000140 RDI:
0000000000000004
RBP:
0000000000000000 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000f00 R11:
0000000000000246 R12:
00000000006bc05c
R13:
fffffffffffffea8 R14:
00000000006bc050 R15:
000000000001fe40
</TASK>
mptcp_recvmsg is allowed to release the msk socket lock when
blocking, and before re-acquiring it another thread could have
switched the sock to TCP_LISTEN status - with a prior
connect(AF_UNSPEC) - also clearing icsk_ack.rcv_mss.
Address the issue preventing the disconnect if some other process is
concurrently performing a blocking syscall on the same socket, alike
commit
4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting").
Fixes:
a6b118febbab ("mptcp: add receive buffer auto-tuning")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/404
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Paolo Abeni [Tue, 20 Jun 2023 16:24:18 +0000 (18:24 +0200)]
mptcp: handle correctly disconnect() failures
Currently the mptcp code has assumes that disconnect() can fail only
at mptcp_sendmsg_fastopen() time - to avoid a deadlock scenario - and
don't even bother returning an error code.
Soon mptcp_disconnect() will handle more error conditions: let's track
them explicitly.
As a bonus, explicitly annotate TCP-level disconnect as not failing:
the mptcp code never blocks for event on the subflows.
Fixes:
7d803344fdc3 ("mptcp: fix deadlock in fastopen error path")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
David Arinzon [Tue, 20 Jun 2023 13:35:44 +0000 (13:35 +0000)]
net: ena: Fix rst format issues in readme
This patch fixes a warning in the ena documentation
file identified by the kernel automatic tools.
The patch also adds a missing newline between
sections.
Signed-off-by: David Arinzon <darinzon@amazon.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202306171804.U7E92zoE-lkp@intel.com/
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230620133544.32584-1-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Abel Wu [Tue, 20 Jun 2023 09:27:11 +0000 (17:27 +0800)]
inet: Cleanup on charging memory for newly accepted sockets
If there is no net-memcg associated with the sock, don't bother
calculating its memory usage for charge.
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Link: https://lore.kernel.org/r/20230620092712.16217-1-wuyun.abel@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
renmingshuai [Tue, 20 Jun 2023 01:49:39 +0000 (09:49 +0800)]
selftests: tc-testing: add one test for flushing explicitly created chain
Add the test for additional reference to chains that are explicitly
created by RTM_NEWCHAIN message.
The test result:
1..1
ok 1 c2b4 - soft lockup alarm will be not generated after delete the prio 0
filter of the chain
This is a follow up to commit
c9a82bec02c3 ("net/sched: cls_api: Fix lockup on flushing explicitly created chain").
Signed-off-by: Mingshuai Ren <renmingshuai@huawei.com>
Acked-by: Pedro Tammela <pctammela@mojatatu.com>
Acked-by: Victor Nogueira <victor@mojatatu.com>
Link: https://lore.kernel.org/r/20230620014939.2034054-1-renmingshuai@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Mon, 19 Jun 2023 17:01:34 +0000 (19:01 +0200)]
dt-bindings: net: micrel,ks8851: allow SPI device properties
The Micrel KS8851 can be attached to SPI or parallel bus and the
difference is expressed in compatibles. Allow common SPI properties
when this is a SPI variant and narrow the parallel memory bus properties
to the second case.
This fixes dtbs_check warning:
qcom-msm8960-cdp.dtb: ethernet@0: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230619170134.65395-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Krzysztof Kozlowski [Sat, 17 Jun 2023 16:57:16 +0000 (18:57 +0200)]
dt-bindings: net: bluetooth: qualcomm: document VDD_CH1
WCN3990 comes with two chains - CH0 and CH1 - where each takes VDD
regulator. It seems VDD_CH1 is optional (Linux driver does not care
about it), so document it to fix dtbs_check warnings like:
sdm850-lenovo-yoga-c630.dtb: bluetooth: 'vddch1-supply' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230617165716.279857-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ravi Gunasekaran [Wed, 14 Jun 2023 11:47:10 +0000 (17:17 +0530)]
net: hsr: Disable promiscuous mode in offload mode
When port-to-port forwarding for interfaces in HSR node is enabled,
disable promiscuous mode since L2 frame forward happens at the
offloaded hardware.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230614114710.31400-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 21 Jun 2023 21:30:48 +0000 (14:30 -0700)]
Merge branch 'leds-trigger-netdev-add-additional-modes'
Christian Marangi says:
====================
leds: trigger: netdev: add additional modes
This is a continue of [1]. It was decided to take a more gradual
approach to implement LEDs support for switch and phy starting with
basic support and then implementing the hw control part when we have all
the prereq done.
This should be the final part for the netdev trigger.
I added net-next tag and added netdev mailing list since I was informed
that this should be merged with netdev branch.
We collect some info around and we found a good set of modes that are
common in almost all the PHY and Switch.
These modes are:
- Modes for dedicated link speed(10, 100, 1000 mbps). Additional mode
can be added later following this example.
- Modes for half and full duplex.
The original idea was to add hw control only modes.
While the concept makes sense in practice it would results in lots of
additional code and extra check to make sure we are setting correct modes.
With the suggestion from Andrew it was pointed out that using the ethtool
APIs we can actually get the current link speed and duplex and this
effectively removed the problem of having hw control only modes since we
can fallback to software.
Since these modes are supported by software, we can skip providing an
user for this in the LED driver to support hw control for these new modes
(that will come right after this is merged) and prevent this to be another
multi subsystem series.
For link speed and duplex we use ethtool APIs.
To call ethtool APIs, rtnl lock is needed but this can be skipped on
handling netdev events as the lock is already held.
[1] https://lore.kernel.org/lkml/
20230216013230.22978-1-ansuelsmth@gmail.com/
====================
Link: https://lore.kernel.org/r/20230619204700.6665-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Mon, 19 Jun 2023 20:47:00 +0000 (22:47 +0200)]
leds: trigger: netdev: expose hw_control status via sysfs
Expose hw_control status via sysfs for the netdev trigger to give
userspace better understanding of the current state of the trigger and
the LED.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Mon, 19 Jun 2023 20:46:59 +0000 (22:46 +0200)]
leds: trigger: netdev: add additional specific link duplex mode
Add additional modes for specific link duplex. Use ethtool APIs to get the
current link duplex and enable the LED accordingly. Under netdev event
handler the rtnl lock is already held and is not needed to be set to
access ethtool APIs.
This is especially useful for PHY and Switch that supports LEDs hw
control for specific link duplex.
Add additional modes:
- half_duplex: Turn on LED when link is half duplex
- full_duplex: Turn on LED when link is full duplex
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christian Marangi [Mon, 19 Jun 2023 20:46:58 +0000 (22:46 +0200)]
leds: trigger: netdev: add additional specific link speed mode
Add additional modes for specific link speed. Use ethtool APIs to get the
current link speed and enable the LED accordingly. Under netdev event
handler the rtnl lock is already held and is not needed to be set to
access ethtool APIs.
This is especially useful for PHY and Switch that supports LEDs hw
control for specific link speed. (example scenario a PHY that have 2 LED
connected one green and one orange where the green is turned on with
1000mbps speed and orange is turned on with 10mpbs speed)
On mode set from sysfs we check if we have enabled split link speed mode
and reject enabling generic link mode to prevent wrong and redundant
configuration.
Rework logic on the set baseline state to support these new modes to
select if we need to turn on or off the LED.
Add additional modes:
- link_10: Turn on LED when link speed is 10mbps
- link_100: Turn on LED when link speed is 100mbps
- link_1000: Turn on LED when link speed is 1000mbps
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera [Tue, 20 Jun 2023 14:48:55 +0000 (16:48 +0200)]
bnxt_en: Link representors to PCI device
Link VF representors to parent PCI device to benefit from
systemd defined naming scheme.
Without this change the representor is visible as ethN.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20230620144855.288443-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 21 Jun 2023 21:02:57 +0000 (14:02 -0700)]
Merge branch 'selftests-preparations-for-out-of-order-operations-patches-in-mlxsw'
Petr Machata says:
====================
selftests: Preparations for out-of-order-operations patches in mlxsw
The mlxsw driver currently makes the assumption that the user applies
configuration in a bottom-up manner. Thus netdevices need to be added to
the bridge before IP addresses are configured on that bridge or SVI added
on top of it. Enslaving a netdevice to another netdevice that already has
uppers is in fact forbidden by mlxsw for this reason. Despite this safety,
it is rather easy to get into situations where the offloaded configuration
is just plain wrong.
Over the course of the following several patchsets, mlxsw code is going to
be adjusted to diminish the space of wrongly offloaded configurations.
Ideally the offload state will reflect the actual state, regardless of the
sequence of operation used to construct that state.
Several selftests build configurations that will not be offloadable in the
future on some systems. The reason is that what will get offloaded is the
actual configuration, not the configuration steps.
For example, when a port is added to a bridge that has an IP address, that
bridge will get a RIF, which it would not have with the current code. But
on Nvidia Spectrum-1 machines, MAC addresses of all RIFs need to have the
same prefix, which the bridge will violate. The RIF thus couldn't be
created, and the enslavement is therefore canceled, because it would lead
to an unoffloadable configuration. This breaks some selftests.
In this patchset, adjust selftests to avoid the configurations that mlxsw
would be incapable of offloading, while maintaining relevance with regards
to the feature that is being tested. There are generally two cases of
fixes:
- Disabling IPv6 autogen on bridges that do not participate in routing,
either because of the abovementioned requirement to keep the same MAC
prefix on all in-HW router interfaces, or, on 802.1ad bridges, because
in-HW router interfaces are not supported at all.
- Setting the bridge MAC address to what it will become after the first
member port is attached, so that the in-HW router interface is created
with a supported MAC address.
The patchset is then split thus:
- Patches #1-#7 adjust generic selftests
- Patches #8-#16 adjust mlxsw-specific selftests
====================
Link: https://lore.kernel.org/r/cover.1687265905.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:56:02 +0000 (15:56 +0200)]
selftests: mlxsw: one_armed_router: Use port MAC for bridge address
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same for this selftest.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:56:01 +0000 (15:56 +0200)]
selftests: mlxsw: vxlan: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for all bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks various aspects of VXLAN offloading and
the bridges do not need to participate in routing traffic. The IP addresses
or the RIFs are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:56:00 +0000 (15:56 +0200)]
selftests: mlxsw: spectrum: q_in_vni_veto: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks vetoing of a different aspect of the
configuration and the bridge does not need to participate in routing
traffic. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:59 +0000 (15:55 +0200)]
selftests: mlxsw: qos_mc_aware: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for both bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks traffic prioritization and scheduling,
and the bridges serve for their L2 forwarding capabilities, and do not need
to participate in routing traffic. The IP addresses or the RIFs are
irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:58 +0000 (15:55 +0200)]
selftests: mlxsw: qos_ets_strict: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for both bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks traffic prioritization and scheduling,
and the bridges serve for their L2 forwarding capabilities, and do not need
to participate in routing traffic. The IP addresses or the RIFs are
irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:57 +0000 (15:55 +0200)]
selftests: mlxsw: qos_dscp_bridge: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks DCB DSCP-based prioritization, and the
bridge serves for its L2 forwarding capabilities, and does not need to
participate in routing traffic. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:56 +0000 (15:55 +0200)]
selftests: mlxsw: mirror_gre_scale: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks how many mirroring sessions a machine is
capable of offloading. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:55 +0000 (15:55 +0200)]
selftests: mlxsw: extack: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge (this holds
for all bridges used here), the bridge MAC address does not have the same
prefix as other interfaces in the system. On Nvidia Spectrum-1 machines all
the RIFs have to have the same 38-bit MAC address prefix. Since the bridge
does not obey this limitation, the RIF cannot be created, and the
enslavement attempt is vetoed on the grounds of the configuration not being
offloadable.
The selftest itself however checks whether a different vetoed aspect of the
configuration provides an extack. The IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in this selftest, thus exempting them from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:54 +0000 (15:55 +0200)]
selftests: mlxsw: q_in_q_veto: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
The swp enslavement to the 802.1ad bridge is not allowed, because RIFs are
not allowed to be created for 802.1ad bridges, but the address indicates
one needs to be created. Thus the veto selftests fail already during the
port enslavement. Then the attempt to create a VLAN on top of the same
bridge is not vetoed, because the bridge is not related to mlxsw, and the
selftest fails.
Fix by disabling automatic IPv6 address generation for the bridges in this
selftest, thus exempting them from the mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:53 +0000 (15:55 +0200)]
selftests: forwarding: router_bridge: Use port MAC for bridge address
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same here.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:52 +0000 (15:55 +0200)]
selftests: forwarding: mirror_gre_*: Use port MAC for bridge address
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The bridge eventually inherits MAC address from its first member, after the
enslavement is acked. A number of (mainly VXLAN) selftests already work
around the problem by setting the MAC address to whatever it will
eventually be anyway. Do the same for several mirror_gre selftests.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:51 +0000 (15:55 +0200)]
selftests: forwarding: mirror_gre_*: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
These two selftests however check mirroring traffic to a gretap netdevice.
The bridge here does not participate in routing traffic and the IP address
or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridges in these selftests, thus exempting them from mlxsw router
attention. Since the bridges are only used for L2 forwarding, this change
should not hinder usefulness of this selftest for testing SW datapath or HW
datapaths in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:50 +0000 (15:55 +0200)]
selftests: forwarding: pedit_dsfield: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks whether skbedit changes packet priority
as appropriate. The bridge thus does not need to participate in routing
traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:49 +0000 (15:55 +0200)]
selftests: forwarding: skbedit_priority: Disable IPv6 autogen on a bridge
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
At the time that the front panel port is enslaved to the bridge, the bridge
MAC address does not have the same prefix as other interfaces in the
system. On Nvidia Spectrum-1 machines all the RIFs have to have the same
38-bit MAC address prefix. Since the bridge does not obey this limitation,
the RIF cannot be created, and the enslavement attempt is vetoed on the
grounds of the configuration not being offloadable.
The selftest itself however checks operation of pedit on IPv4 and IPv6
dsfield and its parts. The bridge thus does not need to participate in
routing traffic and the IP address or the RIF are irrelevant.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Since the bridge is only used for L2 forwarding, this change should not
hinder usefulness of this selftest for testing SW datapath or HW datapaths
in other devices.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:48 +0000 (15:55 +0200)]
selftests: forwarding: dual_vxlan_bridge: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Petr Machata [Tue, 20 Jun 2023 13:55:47 +0000 (15:55 +0200)]
selftests: forwarding: q_in_vni: Disable IPv6 autogen on bridges
In a future patch, mlxsw will start adding RIFs to uppers of front panel
port netdevices, if they have an IP address.
This will cause this selftest to fail spuriously. The swp enslavement to
the 802.1ad bridge is not allowed, because RIFs are not allowed to be
created for 802.1ad bridges, but the address indicates one needs to be
created.
Fix by disabling automatic IPv6 address generation for the HW-offloaded
bridge in this selftest, thus exempting it from mlxsw router attention.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski [Wed, 21 Jun 2023 20:59:46 +0000 (13:59 -0700)]
Merge tag 'for-netdev' of https://git./linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2023-06-21
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 7 files changed, 181 insertions(+), 15 deletions(-).
The main changes are:
1) Fix a verifier id tracking issue with scalars upon spill,
from Maxim Mikityanskiy.
2) Fix NULL dereference if an exception is generated while a BPF
subprogram is running, from Krister Johansen.
3) Fix a BTF verification failure when compiling kernel with LLVM_IAS=0,
from Florent Revest.
4) Fix expected_attach_type enforcement for kprobe_multi link,
from Jiri Olsa.
5) Fix a bpf_jit_dump issue for x86_64 to pick the correct JITed image,
from Yonghong Song.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
bpf/btf: Accept function names that contain dots
selftests/bpf: add a test for subprogram extables
bpf: ensure main program has an extable
bpf: Fix a bpf_jit_dump issue for x86_64 with sysctl bpf_jit_enable.
selftests/bpf: Add test cases to assert proper ID tracking on spill
bpf: Fix verifier id tracking of scalars on spill
====================
Link: https://lore.kernel.org/r/20230621101116.16122-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Linus Torvalds [Wed, 21 Jun 2023 19:36:34 +0000 (12:36 -0700)]
Merge tag 'timers-urgent-2023-06-21' of git://git./linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single regression fix for a regression fix:
For a long time the tick was aligned to clock MONOTONIC so that the
tick event happened at a multiple of nanoseconds per tick starting
from clock MONOTONIC = 0.
At some point this changed as the refined jiffies clocksource which is
used during boot before the TSC or other clocksources becomes usable,
was adjusted with a boot offset, so that time 0 is closer to the point
where the kernel starts.
This broke the assumption in the tick code that when the tick setup
happens early on ktime_get() will return a multiple of nanoseconds per
tick. As a consequence applications which aligned their periodic
execution so that it does not collide with the tick were not longer
guaranteed that the tick period starts from time 0.
The fix for this regression was to realign the tick when it is
initially set up to a multiple of tick periods. That works as long as
the underlying tick device supports periodic mode, but breaks under
certain conditions when the tick device supports only one shot mode.
Depending on the offset, the alignment delta to clock MONOTONIC can
get in a range where the minimal programming delta of the underlying
clock event device is larger than the calculated delta to the next
tick. This results in a boot hang as the tick code tries to play catch
up, but as the tick never fires jiffies are not advanced so it keeps
trying for ever.
Solve this by moving the tick alignement into the NOHZ / HIGHRES
enablement code because at that point it is guaranteed that the
underlying clocksource is high resolution capable and not longer
depending on the tick.
This is far before user space starts, so at the point where
applications try to align their timers, the old behaviour of the tick
happening at a multiple of nanoseconds per tick starting from clock
MONOTONIC = 0 is restored"
* tag 'timers-urgent-2023-06-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/common: Align tick period during sched_timer setup
Linus Torvalds [Wed, 21 Jun 2023 18:10:40 +0000 (11:10 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost
Pull virtio fix from Michael Tsirkin:
"A last minute revert to fix a regression"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
Revert "virtio-blk: support completion batching for the IRQ path"
Linus Torvalds [Wed, 21 Jun 2023 17:58:46 +0000 (10:58 -0700)]
Revert "efi: random: refresh non-volatile random seed when RNG is initialized"
This reverts commit
e7b813b32a42a3a6281a4fd9ae7700a0257c1d50 (and the
subsequent fix for it:
41a15855c1ee "efi: random: fix NULL-deref when
refreshing seed").
It turns otu to cause non-deterministic boot stalls on at least a HP
6730b laptop.
Reported-and-bisected-by: Sami Korkalainen <sami.korkalainen@proton.me>
Link: https://lore.kernel.org/all/GQUnKz2al3yke5mB2i1kp3SzNHjK8vi6KJEh7rnLrOQ24OrlljeCyeWveLW9pICEmB9Qc8PKdNt3w1t_g3-Uvxq1l8Wj67PpoMeWDoH8PKk=@proton.me/
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Bagas Sanjaya <bagasdotme@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 21 Jun 2023 17:32:42 +0000 (10:32 -0700)]
Merge tag 'spi-fix-v6.4-rc7' of git://git./linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One last fix for SPI, just a simple fix for incorrect handling of
probe deferral for DMA in the Qualcomm GENI driver"
* tag 'spi-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-geni-qcom: correctly handle -EPROBE_DEFER from dma_request_chan()
Linus Torvalds [Wed, 21 Jun 2023 17:29:42 +0000 (10:29 -0700)]
Merge tag 'regulator-fix-v6.4-rc7' of git://git./linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One simple fix for v6.4, some incorrectly specified bitfield masks in
the PCA9450 driver"
* tag 'regulator-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: pca9450: Fix LDO3OUT and LDO4OUT MASK
Linus Torvalds [Wed, 21 Jun 2023 17:25:43 +0000 (10:25 -0700)]
Merge tag 'regmap-fix-v6.4-rc7' of git://git./linux/kernel/git/broonie/regmap
Pull regmap fix from Mark Brown:
"One more fix for v6.4
The earlier fix to take account of the register data size when
limiting raw register writes exposed the fact that the Intel AVMM bus
was incorrectly specifying too low a limit on the maximum data
transfer, it is only capable of transmitting one register so had set a
transfer size limit that couldn't fit both the value and the the
register address into a single message"
* tag 'regmap-fix-v6.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: spi-avmm: Fix regmap_bus max_raw_write
Horatiu Vultur [Thu, 15 Jun 2023 09:47:40 +0000 (11:47 +0200)]
net: micrel: Change to receive timestamp in the frame for lan8841
Currently for each timestamp frame, the SW needs to go and read the
received timestamp over the MDIO bus. But the HW has the capability
to store the received nanoseconds part and the least significant two
bits of the seconds in the reserved field of the PTP header. In this
way we could save few MDIO transactions (actually a little more
transactions because the access to the PTP registers are indirect)
for each received frame.
Instead of reading the rest of seconds part of the timestamp of the
frame using MDIO transactions schedule PTP worker thread to read the
seconds part every 500ms and then for each of the received frames use
this information. Because if for example running with 512 frames per
second, there is no point to read 512 times the second part.
Doing all these changes will give a great CPU usage performance.
Running ptp4l with logSyncInterval of -9 will give a ~60% CPU
improvement.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jens Axboe [Tue, 20 Jun 2023 22:11:51 +0000 (16:11 -0600)]
io_uring/net: use the correct msghdr union member in io_sendmsg_copy_hdr
Rather than assign the user pointer to msghdr->msg_control, assign it
to msghdr->msg_control_user to make sparse happy. They are in a union
so the end result is the same, but let's avoid new sparse warnings and
squash this one.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202306210654.mDMcyMuB-lkp@intel.com/
Fixes:
cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 19 Jun 2023 15:41:05 +0000 (09:41 -0600)]
io_uring/net: disable partial retries for recvmsg with cmsg
We cannot sanely handle partial retries for recvmsg if we have cmsg
attached. If we don't, then we'd just be overwriting the initial cmsg
header on retries. Alternatively we could increment and handle this
appropriately, but it doesn't seem worth the complication.
Move the MSG_WAITALL check into the non-multishot case while at it,
since MSG_WAITALL is explicitly disabled for multishot anyway.
Link: https://lore.kernel.org/io-uring/0b0d4411-c8fd-4272-770b-e030af6919a0@kernel.dk/
Cc: stable@vger.kernel.org # 5.10+
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jens Axboe [Mon, 19 Jun 2023 15:35:34 +0000 (09:35 -0600)]
io_uring/net: clear msg_controllen on partial sendmsg retry
If we have cmsg attached AND we transferred partial data at least, clear
msg_controllen on retry so we don't attempt to send that again.
Cc: stable@vger.kernel.org # 5.10+
Fixes:
cac9e4418f4c ("io_uring/net: save msghdr->msg_control for retries")
Reported-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jiri Olsa [Sun, 18 Jun 2023 13:14:14 +0000 (15:14 +0200)]
bpf: Force kprobe multi expected_attach_type for kprobe_multi link
We currently allow to create perf link for program with
expected_attach_type == BPF_TRACE_KPROBE_MULTI.
This will cause crash when we call helpers like get_attach_cookie or
get_func_ip in such program, because it will call the kprobe_multi's
version (current->bpf_ctx context setup) of those helpers while it
expects perf_link's current->bpf_ctx context setup.
Making sure that we use BPF_TRACE_KPROBE_MULTI expected_attach_type
only for programs attaching through kprobe_multi link.
Fixes:
ca74823c6e16 ("bpf: Add cookie support to programs attached with kprobe multi link")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230618131414.75649-1-jolsa@kernel.org
Florent Revest [Thu, 15 Jun 2023 14:56:07 +0000 (16:56 +0200)]
bpf/btf: Accept function names that contain dots
When building a kernel with LLVM=1, LLVM_IAS=0 and CONFIG_KASAN=y, LLVM
leaves DWARF tags for the "asan.module_ctor" & co symbols. In turn,
pahole creates BTF_KIND_FUNC entries for these and this makes the BTF
metadata validation fail because they contain a dot.
In a dramatic turn of event, this BTF verification failure can cause
the netfilter_bpf initialization to fail, causing netfilter_core to
free the netfilter_helper hashmap and netfilter_ftp to trigger a
use-after-free. The risk of u-a-f in netfilter will be addressed
separately but the existence of "asan.module_ctor" debug info under some
build conditions sounds like a good enough reason to accept functions
that contain dots in BTF.
Although using only LLVM=1 is the recommended way to compile clang-based
kernels, users can certainly do LLVM=1, LLVM_IAS=0 as well and we still
try to support that combination according to Nick. To clarify:
- > v5.10 kernel, LLVM=1 (LLVM_IAS=0 is not the default) is recommended,
but user can still have LLVM=1, LLVM_IAS=0 to trigger the issue
- <= 5.10 kernel, LLVM=1 (LLVM_IAS=0 is the default) is recommended in
which case GNU as will be used
Fixes:
1dc92851849c ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Florent Revest <revest@chromium.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Yonghong Song <yhs@meta.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/bpf/20230615145607.3469985-1-revest@chromium.org
Michael S. Tsirkin [Thu, 8 Jun 2023 21:42:53 +0000 (17:42 -0400)]
Revert "virtio-blk: support completion batching for the IRQ path"
This reverts commit
07b679f70d73483930e8d3c293942416d9cd5c13.
This change appears to have broken things...
We now see applications hanging during disk accesses.
e.g.
multi-port virtio-blk device running in h/w (FPGA)
Host running a simple 'fio' test.
[global]
thread=1
direct=1
ioengine=libaio
norandommap=1
group_reporting=1
bs=4K
rw=read
iodepth=128
runtime=1
numjobs=4
time_based
[job0]
filename=/dev/vda
[job1]
filename=/dev/vdb
[job2]
filename=/dev/vdc
...
[job15]
filename=/dev/vdp
i.e. 16 disks; 4 queues per disk; simple burst of 4KB reads
This is repeatedly run in a loop.
After a few, normally <10 seconds, fio hangs.
With 64 queues (16 disks), failure occurs within a few seconds; with 8 queues (2 disks) it may take ~hour before hanging.
Last message:
fio-3.19
Starting 8 threads
Jobs: 1 (f=1): [_(7),R(1)][68.3%][eta 03h:11m:06s]
I think this means at the end of the run 1 queue was left incomplete.
'diskstats' (run while fio is hung) shows no outstanding transactions.
e.g.
$ cat /proc/diskstats
...
252 0 vda
1843140071 0
14745120568 712568645 0 0 0 0 0 3117947
712568645 0 0 0 0 0 0
252 16 vdb
1816291511 0
14530332088 704905623 0 0 0 0 0 3117711
704905623 0 0 0 0 0 0
...
Other stats (in the h/w, and added to the virtio-blk driver ([a]virtio_queue_rq(), [b]virtblk_handle_req(), [c]virtblk_request_done()) all agree, and show every request had a completion, and that virtblk_request_done() never gets called.
e.g.
PF= 0 vq=0 1 2 3
[a]request_count -
839416590 813148916 105586179 84988123
[b]completion1_count -
839416590 813148916 105586179 84988123
[c]completion2_count - 0 0 0 0
PF= 1 vq=0 1 2 3
[a]request_count -
823335887 812516140 104582672 75856549
[b]completion1_count -
823335887 812516140 104582672 75856549
[c]completion2_count - 0 0 0 0
i.e. the issue is after the virtio-blk driver.
This change was introduced in kernel 6.3.0.
I am seeing this using 6.3.3.
If I run with an earlier kernel (5.15), it does not occur.
If I make a simple patch to the 6.3.3 virtio-blk driver, to skip the blk_mq_add_to_batch()call, it does not fail.
e.g.
kernel 5.15 - this is OK
virtio_blk.c,virtblk_done() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
blk_mq_complete_request(req);
}
kernel 6.3.3 - this fails
virtio_blk.c,virtblk_handle_req() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
if (!blk_mq_complete_request_remote(req)) {
if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
}
}
}
If I do, kernel 6.3.3 - this is OK
virtio_blk.c,virtblk_handle_req() [irq handler]
if (likely(!blk_should_fake_timeout(req->q))) {
if (!blk_mq_complete_request_remote(req)) {
virtblk_request_done(req); //force this here...
if (!blk_mq_add_to_batch(req, iob, virtblk_vbr_status(vbr), virtblk_complete_batch)) {
virtblk_request_done(req); //this never gets called... so blk_mq_add_to_batch() must always succeed
}
}
}
Perhaps you might like to fix/test/revert this change...
Martin
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/
202306090826.C1fZmdMe-lkp@intel.com/
Cc: Suwan Kim <suwan.kim027@gmail.com>
Tested-by: edliaw@google.com
Reported-by: "Roberts, Martin" <martin.roberts@intel.com>
Message-Id: <
336455b4f630f329380a8f53ee8cad3868764d5c.
1686295549.git.mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Jakub Kicinski [Wed, 21 Jun 2023 03:44:39 +0000 (20:44 -0700)]
Merge branch 'net-stmmac-dwmac-qcom-ethqos-add-support-for-emac4'
Bartosz Golaszewski says:
====================
net: stmmac: dwmac-qcom-ethqos: add support for EMAC4
Extend the dwmac-qcom-ethqos driver to support EMAC4. While at it: rework the
code somewhat. The bindings have been reviewed by DT maintainers.
This is a sub-series of [1] with only the patches targetting the net subsystem
as they can go in independently.
[1] https://lore.kernel.org/lkml/
20230617001644.
4e093326@kernel.org/T/
====================
Link: https://lore.kernel.org/r/20230619092402.195578-1-brgl@bgdev.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bartosz Golaszewski [Mon, 19 Jun 2023 09:24:02 +0000 (11:24 +0200)]
net: stmmac: dwmac-qcom-ethqos: add support for emac4 on sa8775p platforms
sa8775p uses EMAC version 4, add the relevant defines, rename the
has_emac3 switch to has_emac_ge_3 (has emac greater-or-equal than 3)
and add the new compatible.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bartosz Golaszewski [Mon, 19 Jun 2023 09:24:01 +0000 (11:24 +0200)]
dt-bindings: net: qcom,ethqos: add description for sa8775p
Add the compatible for the MAC controller on sa8775p platforms. This MAC
works with a single interrupt so add minItems to the interrupts property.
The fourth clock's name is different here so change it. Enable relevant
PHY properties. Add the relevant compatibles to the binding document for
snps,dwmac as well.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bartosz Golaszewski [Mon, 19 Jun 2023 09:24:00 +0000 (11:24 +0200)]
net: stmmac: add new switch to struct plat_stmmacenet_data
On some platforms, the PCS can be integrated in the MAC so the driver
will not see any PCS link activity. Add a switch that allows the platform
drivers to let the core code know.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bartosz Golaszewski [Mon, 19 Jun 2023 09:23:59 +0000 (11:23 +0200)]
net: stmmac: dwmac-qcom-ethqos: add support for SGMII
On sa8775p the MAC is connected to the external PHY over SGMII so add
support for it to the driver.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
projects / platform / kernel / linux-rpi.git / log