drm/amd/display: Change initializer to single brace

[Why & How]
Change struct initializer from multiple brace to single brace.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: rename lane_settings to hw_lane_settings

[why]
This is one of the major steps to decouple hw lane settings
from dpcd lane settings.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix in overriding DP drive settings

[Why & How]
Check always_match_dpcd_with_hw_lane_settings bit before
overriding the DP drive settings

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Enrich the log in MST payload update

[Why & How]
Enrich the log to provide more informatio in MST payload update.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Ariel Bernstein <Eric.Bernstein@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Change HDMI judgement condition.

[Why & How]
Use dc_is_hdmi_signal to determine signal type.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: JinZe.Xu <JinZe.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix DC warning at driver load

[Why]
Wrong index was checked for dcfclk_mhz, causing false warning.

[How]
Fix the assertion index.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add SMU logging code

[WHY]
Logging for SMU response value after the wait allows us to know
immediately what the response value was. Makes it easier to debug should
the value be anything other than OK.

[HOW]
Using the the already available DC SMU logging functions.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Turn off internal backlight when plugging external monitor

[why]
For VG, we want to turn off power/backlight of the intenral panel when
plugging in external monitor and going to "external monitor only" mode.

[how]
For turning off power of the internal panel, ignore the config flag whic
bypasses power sequencing for eDP panels.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix eDP not light up on resume

[why]
Only on VG, if external display is disconnected during S3 suspend, the
internal panel doesn't light up on resume because we set the power state
using an unsupported DPCD register SET_POWER.  To check the register is
supported, we need to check SET_POWER_CAPABLE first which is
eDP-specific DPCD register field.

[how]
Check the SET_POWER_CAPABLE register field and decide the control of the
eDP power state based on the read register value.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Agustin Gutierrez <Agustin.Gutierrez@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungkim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add mst port output bw check

[Why]
when connect one 4k@144hz dp to dsc mst hub, 4k@144hz mode is in valid
mode list. but some mst hub port output bandwidth does not support
4k@144hz.

[How]
add mst port output bandwidth checks, include full_pbn, branch max
throughput mps.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jerry Zuo <Jerry.Zuo@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary detect link code

Delete unnecessary codes in detect_link_and_local_sink. We already have
correct stop logic in dc_link_detect.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Take emulated dc_sink into account for HDCP

[Why]
While updating the config of hdcp, we use the sink_singal type of the
dc_sink to decide the HDCP operation mode. However, it doesn't consider
the case when the sink is a emulated one.

[How]
Take dc_em_sink into account while updating HDCP config.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Release remote dc_sink under mst scenario

[Why]
Observe that we have several problems while releasing remote dc_sink
under mst cases.

- When unplug mst branch device from the source, we now try to free all
  remote dc_sinks in dm_helpers_dp_mst_stop_top_mgr(). However, there are
  bugs while we're releasing dc_sinks here. First of all,
  link->remote_sinks[] array get shuffled within
  dc_link_remove_remote_sink(). As the result, increasing the array index
  within the releasing loop is wrong. Secondly, it tries to call
  dc_sink_release() to release the dc_sink of the same aconnector every
  time in the loop. Which can't release dc_sink of all aconnector in the
  mst topology.
- There is no code path for us to release remote dc_sink for disconnected
  sst monitor which unplug event is notified by CSN sideband message. Which
  means we'll use stale dc_sink data to represent later on connected
  monitor. Also, has chance to break the maximum remote dc_sink number
  constraint.

[How]
Distinguish unplug event of mst scenario into 2 cases.

* Unplug sst/legacy stream sink off the mst topology
- Release related remote dc_sink in detec_ctx().

* Unplug mst branch device off the mst topology
- Release related remote dc_sink in early_unregister()

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "drm/amd/display: turn DPMS off on connector unplug"

This reverts commit 3c4d55c9b9becedd8d31a7c96783a364533713ab.

Revert the commit because:
- It's incomplete of the function dm_set_dpms_off() for mst case.  For
  stream sinks whithin the same mst topology, they share the same dc_link.
  dm_set_dpms_off() tries to update one mst stream only which is
  incomplete.
- Setting dpms off should be triggered by usermode. Besdies, it seems
  usermode does release relevant resource for mst & non-mst case when
  unplug connecotr now.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Revert "drm/amd/display: Add flag to detect dpms force off during HPD"

This reverts commit 035f54969bb2c1a5ced52f43e4ef393e0c0f6bfa.

The reverted commit was trying to fix side effect brought by
commit 3c4d55c9b9be ("drm/amd/display: turn DPMS off on connector unplug")

However,
* This reverted commit will have mst case never call dm_set_dpms_off()
  which conflicts the idea of original commit 3c4d55c9b9be ("drm/amd/display: turn DPMS off on connector unplug")
  That's due to dm_crtc_state is always null since the input parameter
  aconnector is the root device (source) of mst topology.  It's not an
  end stream sink within the mst topology.
* Setting dpms off should be triggered by usermode. Besdies, it seems
  usermode does release relevant resource for mst & non-mst case when
  unplug connecotr now. Which means we no longer need both commits now:
  commit 3c4d55c9b9be ("drm/amd/display: turn DPMS off on connector unplug")
  commit 035f54969bb2 ("drm/amd/display: Add flag to detect dpms force off during HPD")

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aurabindo Jayamohanan Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Revert "drm/amd/display: keep eDP Vdd on when eDP stream is already enabled"

A variety of Lenovo machines with Rembrandt APUs and OLED panels have
stopped showing the display at login.  This behavior clears up after
leaving it idle and moving the mouse or touching keyboard.

It was bisected to be caused by commit 559e2655220d ("drm/amd/display:
keep eDP Vdd on when eDP stream is already enabled").  Revert this commit
to fix the issue.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2047
Reported-by: Aaron Ma <aaron.ma@canonical.com>
Fixes: 559e2655220d ("drm/amd/display: keep eDP Vdd on when eDP stream is already enabled")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mark Pearson <markpearson@lenovo.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Remove compiler warning

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Cruise Hung <Cruise.Hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add LSDMA block for LSDMA v6.0.1

This patch adds LSDMA ip block for LSDMA v6.0.1.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing reg defs for DCN3x HUBBUB

[Why&How]
The omitted register definition caused call traces like:

[    3.811215] WARNING: CPU: 7 PID: 794 at drivers/gpu/drm/amd/amdgpu/../display/dc/dc_helper.c:120 set_reg_field_values.constprop.0+0xc7/0xe0 [amdgpu]
[    3.811406] Modules linked in: amdgpu(+) drm_ttm_helper ttm iommu_v2 gpu_sched drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm i2c_piix4 drm_panel_orientation_quirks
[    3.811419] CPU: 7 PID: 794 Comm: systemd-udevd Not tainted 5.16.0-kfd+ #132
[    3.811422] Hardware name: System manufacturer System Product Name/ROG STRIX B450-F GAMING, BIOS 3003 12/09/2019
[    3.811425] RIP: 0010:set_reg_field_values.constprop.0+0xc7/0xe0 [amdgpu]
[    3.811615] Code: 08 49 89 51 08 8b 08 48 8d 42 08 49 89 41 08 44 8b 02 48 8d 50 08 0f b6 c9 49 89 51 08 8b 00 45 85 c0 75 b3 0f 0b eb af 5d c3 <0f> 0b e9 48 ff ff ff 49 8b 51 08 eb d0 49 8b 41 08 eb d5 66 0f 1f
[    3.811619] RSP: 0018:ffffb8c1c04cf640 EFLAGS: 00010246
[    3.811621] RAX: 0000000000000000 RBX: ffff96f2100d8800 RCX: 0000000000000000
[    3.811623] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffb8c1c04cf650
[    3.811625] RBP: ffffb8c1c04cf640 R08: 000000000000047f R09: ffffb8c1c04cf658
[    3.811627] R10: ffff96f5161ff000 R11: ffff96f5161ff000 R12: ffff96f204afb9c0
[    3.811629] R13: 0000000000000000 R14: ffff96f202b94c00 R15: ffffb8c1c04cf718
[    3.811631] FS:  00007fe07c2e2880(0000) GS:ffff96f5059c0000(0000) knlGS:0000000000000000
[    3.811634] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    3.811636] CR2: 0000559634ab57b8 CR3: 0000000120674000 CR4: 00000000003506e0
[    3.811637] Call Trace:
[    3.811640]  <TASK>
[    3.811642]  generic_reg_update_ex+0x69/0x200 [amdgpu]
[    3.811831]  ? _printk+0x58/0x6f
[    3.811836]  dcn32_init_crb+0x18f/0x1b0 [amdgpu]
[    3.812031]  dcn32_init_hw+0x379/0x6a0 [amdgpu]
[    3.812223]  dc_hardware_init+0xba/0x100 [amdgpu]
[    3.812415]  amdgpu_dm_init.isra.0.cold+0x166/0x1867 [amdgpu]
[    3.812616]  ? dev_vprintk_emit+0x139/0x15d
[    3.812621]  ? dev_printk_emit+0x4e/0x65
[    3.812624]  dm_hw_init+0x12/0x30 [amdgpu]
[    3.812820]  amdgpu_device_init.cold+0x130d/0x178c [amdgpu]
[    3.813017]  ? pci_read_config_word+0x25/0x40
[    3.813021]  amdgpu_driver_load_kms+0x1a/0x130 [amdgpu]
[    3.813178]  amdgpu_pci_probe+0x130/0x330 [amdgpu]

Fixes: 4f29f9cf092b ("drm/amd: add register headers for DCN32/321")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: Don't show warning on reading vbios values for SMU13 3.1

Some APUs with SMU13 are showing the following message:
`amdgpu 0000:63:00.0: amdgpu: Unexpected and unhandled version: 3.1`

This warning isn't relevant for smu info 3.1, as no bootup information
is present in the table.

Fixes: 593a54f18031 ("drm/amd/pm: correct the way for retrieving bootup clocks")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: skip to set mp1 unload state in special case

set mp1 unload state will cause the SMC FW can't accept any SMU message,
skip to set mp1 unload state to avoid following case fail:
- runtime pm case.
- gpu reset case.

Fixes: 72aeb6ee0c78 ("drm/amd/pm: fix driver reload SMC firmware fail issue for smu13")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/gmc11: avoid cpu accessing registers to flush VM

Due to gfxoff on, cpu accessing registers is not expected.

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: adjust EccInfo_t struct

The EccInfo_t struct in driver_if.h is as below in official release
verion 68.55.0
 typedef struct {
   uint64_t mca_umc_status;
   uint64_t mca_umc_addr;

   uint16_t ce_count_lo_chip;
   uint16_t ce_count_hi_chip;

   uint32_t eccPadding;

   uint64_t mca_ceumc_addr;
 } EccInfo_t;
It's different from the debug version druing develop print correctable
error address, so adjust EccInfo_t struct.

Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Adjust logic around GTT size (v3)

Certain GL unit tests for large textures can cause problems
with the OOM killer since there is no way to link this memory
to a process.  This was originally mitigated (but not necessarily
eliminated) by limiting the GTT size.  The problem is this limit
is often too low for many modern games so just make the limit 1/2
of system memory. The OOM accounting needs to be addressed, but
we shouldn't prevent common 3D applications from being usable
just to potentially mitigate that corner case.

Set default GTT size to max(3G, 1/2 of system ram) by default.

v2: drop previous logic and default to 3/4 of ram
v3: default to half of ram to align with ttm
v4: fix spelling in comment (Kent)

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1942
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: fix incorrrect SPDX-License-Identifiers

radeon is MIT.  This were incorrectly changed in
commit b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
and
commit d198b34f3855 (".gitignore: add SPDX License Identifier")
and:
commit ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")

Fixes: d198b34f3855 (".gitignore: add SPDX License Identifier")
Fixes: ec8f24b7faaf ("treewide: Add SPDX license identifier - Makefile/Kconfig")
Fixes: b24413180f56 ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2053
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Remove break for VMID loop TLB flush on MES

Loop through all VMIDs for gmc_v10_0_flush_gpu_tlb_pasid and
gmc_v11_0_flush_gpu_tlb_pasid (only if using MES for gmc_v10). This is
required for MES due to use_different_vmid_compute causing SDMA queues
to be assigned different VMIDs than compute for the same PASID.

Signed-off-by: Graham Sider <Graham.Sider@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: adjust unified queue code format

Fixed some errors and warnings found by checkpatch.pl.

Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: support unified queue only in vcn4

- remove multiple queue support
- add unified queue related functions

Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/vcn: add unified queue ib test

- add unified queue headers
- add unified queue ib tests

Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unnecessary guard from DC resource

Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: make FP handling in Makefiles consistent

Use the same pattern as the DML Makefile and while we are here
add a missing x86 guard around the msse flags for DCN3.2.x.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/display: Protect some functions with CONFIG_DRM_AMD_DC_DCN"

This reverts commit d8e4fb9112e88d8d87ffbc38fa511e7118042d4f.

This is no longer necessary as newer patches require these functions
without CONFIG_DRM_AMD_DC_DCN.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: fix warning when CONFIG_HSA_AMD_P2P is not set

drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_topology.c:1542:11:
warning: variable 'i' set but not used [-Wunused-but-set-variable]

Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: remove redundant enable_mes and enable_mes_kiq

enable_mes and enable_mes_kiq are set in both device init and
MES IP init. Leave the ones in MES IP init, since it is
a more accurate way to judge from GC IP version.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Blank for uclk OC in dm instead of dc

[Why]
All displays need to be blanked during the uclk OC interface so that we can
guarantee pstate switching support. If the display config doesn't support
pstate switching, only using core_link_disable_stream will not enable it
as the front-end is untouched. We need to go through the full plane removal
sequence to properly program the pipe to allow pstate switching.

[How]
 - guard clk_mgr functions with non-NULL checks

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add null check to dc_submit_i2c_oem

[why]
dc_submit_i2c_oem could be called with ddc null

[how]
add null check and fail the call instead

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Martin Leung <martin.leung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: FVA timing adjustment

[why]
need to add timing adjustment for fva.

[how]
add hook to optc and hwseq.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add vrr_active_variable to dc_stream_update

[WHY]
The display driver on some OSes need to track it in order to
perform memory clock switching decisions.

[HOW]
Propagate the vrr active state to dirty bit so that on mode set it
disables dynamic memory clock switching.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Harry VanZyllDeJong <harry.vanzylldejong@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Pass vrr mode to dcn

[WHY]
New features will require knowing the vrr mode for their enablement.

[HOW]
Pass the state via a member of dc_stream.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Felipe Clark <Felipe.Clark@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Adding VTEM to dc

[Why]
Video Timing Extended Metadata packet (VTEM) is required for features
like VRR and FVA

[How]
Adding support for VTEM transmission to stream encoders in DCN20 and DCN30
as part of FVA support

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Copy hfvsif_infopacket when stream update

[Why & How]
Miss to copy hfvsif_infopacket when copying stream updates.
Check and copy it.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add support for HF-VSIF

[Why]
- Currently there is no support for HF-VSIF
- The current support of VSIF is limited to H14b infoframe

[How]
- refactor VSIF
- Added new builder for HF-VSIF
- Added the HF-VSIF packet to DisplayTarget
- Updates DC to apply HF-VSIF updates when updating streams

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ahmad Othman <ahmad.othman@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Firmware assisted MCLK switch and FS

[WHY]
Memory clock switching has great potential for power savings.

[HOW]
The driver code was modified to notify the DMCUB firmware that it should
stretch the vertical blank of frames when a memory clock switch is about
to start so that no blackouts happen on the screen due to unavailability
of the frame buffer.
The driver logic to determine when such firmware assisted strategy can
be initiated is also implemented and consists on checking prerequisites
of the feature.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Felipe Clark <felipe.clark@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DAL ACR, dc part, fix missing dcn30

[Why]
- missing in dcn30 function
- Fix a divide by 0 when ACR trigger

[How]
- Add IS_SMU_TIMEOUT() to dcn30_smu_send_msg_with_param
- Add zero check in dcn20_update_clocks_update_dentist

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Ian Chen <ian.chen@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix comments

[Why & how]
Fix format and typo of comments.

Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Drop unused privacy_mask setters and getters

[Why and How]
dwbc_funcs.set/get_privacy_mask isn't being used anymore, drop it

Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Oliver Logush <oliver.logush@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: 3.2.190

This version brings along the following:
- DP fixes
- Exiting idle optimizations on mouse updates

Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update topology_update_input_v3 struct

[Why]
DIO parameters were missing in topology_update_intput_v3 struct.

[How]
Add DIO parameters in v3 struct and update in functions perspectively.

Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add debug option for exiting idle optimizations on cursor updates

[Description]
- Have option to exit idle opt on cursor updates
for debug and optimizations purposes

Reviewed-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dsc validate fail not pass to atomic check

[Why] when 4k@144hz dp connect to dp1.4 dsc mst hub, requested
bandwidth exceeds caps of dsc hub. but dsc bw valid functions,
increase_dsc_bpp, try_disable_dsc, pre_validate_dsc,
compute_mst_dsc_configs_for_state, do not return false to
atomic check. this cause user mode initiate mode set to kernel,
then cause kernel assert, system hang.

[How] dsc bandwidth valid functions return pass or fail to atomic
check.

Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Fix monitor flash issue

[Why & How]
For a some specific monitors, when connected on boot or hot plug,
monitor flash for 1/2 seconds can happen during first HDCP query
operation. Ading some delay in the init sequence for these monitors
fixes the issue, so it is implemented as monitor specific patch.

Co-authored-by: Shah Dharati <dharshah@amd.com>
Reviewed-by: Hansen Dsouza <Hansen.Dsouza@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Shah Dharati <dharshah@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: lower lane count first when CR done partially fails in EQ

[why]
According to DP specs, in EQ DONE phase of link training, we
should lower lane count when at least one CR DONE bit is set to 1, while
lower link rate when all CR DONE bits are 0s. However in our code, we will
treat both cases as latter. This is not exactly correct based on the specs
expectation.

[how]
Check lane0 CR DONE bit when it is still set but CR DONE fails,
we treat it as a partial CR DONE failure in EQ DONE phase, we
will follow the same fallback flow as when ED DONE fails in EQ
DONE phase.

Reviewed-by: George Shen <George.Shen@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Add available memory ioctl

Add a new KFD ioctl to return the largest possible memory size that
can be allocated as a buffer object using
kfd_ioctl_alloc_memory_of_gpu. It attempts to use exactly the same
accept/reject criteria as that function so that allocating a new
buffer object of the size returned by this new ioctl is guaranteed to
succeed, barring races with other allocating tasks.

This IOCTL will be used by libhsakmt:
https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.html

Signed-off-by: Daniel Phillips <Daniel.Phillips@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "drm/amdgpu/gmc11: enable AGP aperture"

This reverts commit 2cfe34e18970d26bff73c63f16c76dae22138d19.
Enable AGP aperture cause SDMA page fault for gfx11.0.2,
so temp disable AGP aperture until SDMA FW resolved this.

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Gui <Jack.Gui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable MACO support for SMU 13.0.0

Enable BAMACO reset support for SMU 13.0.0.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable UCLK DS feature for SMU 13.0.0

The feature is ready with latest PMFW and IFWI.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: dml: move some variables to heap

[Why&How]
To reduce stack usage, move some variables into heap in the DML function
dml32_ModeSupportAndSystemConfigurationFull()

Fixes: dda4fb85e433 ("drm/amd/display: DML changes for DCN32/321")
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use pre-allocated temp struct for bounding box update

[Why]

There is a theoretical problem in prior patches for reducing the stack
size of *update_bw_bounding_box() functions.

By modifying the soc.clock_limits[n] struct directly, this can cause
unintended behavior as the for loop attempts to swap rows in
clock_limits[n]. A temporary struct is still required to make sure we
stay functinoally equivalent.

[How]

Add a temporary clock_limits table to the SOC struct, and use it when
swapping rows.

Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix GTT size reporting in amdgpu_ioctl

The commit below changed the TTM manager size unit from pages to
bytes, but failed to adjust the corresponding calculations in
amdgpu_ioctl.

Fixes: dfa714b88eb0 ("drm/amdgpu: remove GTT accounting v2")
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1930
Bug: https://gitlab.freedesktop.org/mesa/mesa/-/issues/6642
Tested-by: Martin Roukala <martin.roukala@mupuf.org>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: remove the repeated EnableGfxImu message sending

The EnableGfxImu message will be issued in the set_gfx_power_up_by_imu.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/pm: correct the firmware flag address for SMU IP v13.0.4

For SMU IP v13.0.4, the smnMP1_FIRMWARE_FLAGS address is different,
we need this to correct the reading address.

Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: ignore modifiers when checking for format support

[Why&How]
There are cases where swizzle modes are set but modifiers arent. For
such a userspace, we need not check modifiers while checking
compatibilty in the drm hook for checking plane format.

Ignore checking modifiers but check the DCN generation for the
supported swizzle mode.

v2: squash in unused variable removal (Alex)

Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd: disable GPA mode in backdoor load

GPA mode should be disabled in direct load.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/discovery: enable vcn/jpeg v4_0_2

Enable vcn/jpeg 4_0_2.

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: fix driver reload SMC firmware fail issue for smu13

issue calltrace:
[  402.773695] [drm] failed to load ucode SMC(0x2C)
[  402.773754] [drm] psp gfx command LOAD_IP_FW(0x6) failed and response status is (0x0)
[  402.773762] [drm:psp_load_smu_fw [amdgpu]] *ERROR* PSP load smu failed!
[  402.966758] [drm:psp_v13_0_ring_destroy [amdgpu]] *ERROR* Fail to stop psp ring
[  402.966949] [drm:psp_hw_init [amdgpu]] *ERROR* PSP firmware loading failed
[  402.967116] [drm:amdgpu_device_fw_loading [amdgpu]] *ERROR* hw_init of IP block <psp> failed -22
[  402.967252] amdgpu 0000:03:00.0: amdgpu: amdgpu_device_ip_init failed
[  402.967255] amdgpu 0000:03:00.0: amdgpu: Fatal error during GPU init

if not reset mp1 state during kernel driver unload, it will cause psp
load pmfw fail at the second time.

add PPSMC_MSG_PrepareMp1ForUnload support for smu_v13_0_0/smu_v13_0_7

Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: support BAMACO reset on smu_v13_0_7

support BAMACO reset on smu_v13_0_7, take BAMACO as a subset of BACO
for the low latency, and it only happens on specific platforms.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable gfxoff on smu_v13_0_7

enable gfxoff on smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: update the driver if header for smu_v13_0_7

update the driver if header for smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Stop any pending reset if another in progress.

We skip rest requests if another one is already in progress.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Rename amdgpu_device_gpu_recover_imp back to amdgpu_device_gpu_recover

We removed the wrapper that was queueing the recover function
into reset domain queue who was using this name.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add work_struct for GPU reset from kfd.

We need to have a work_struct to cancel this reset if another
already in progress.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add work_struct for GPU reset from debugfs

We need to have a work_struct to cancel this reset if another
already in progress.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/admgpu: Serialize RAS recovery work directly into reset domain queue.

Save the extra usless work schedule.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Cache result of last reset at reset domain level.

Will be read by executors of async reset like debugfs.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Revert "workqueue: remove unused cancel_work()"

This reverts commit 6417250d3f894e66a68ba1cd93676143f2376a6f.

amdpgu need this function in order to prematurly stop pending
reset works when another reset work already in progress.

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Lai Jiangshan<jiangshanlai@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Remove field io_link_count from struct kfd_topology_device

The field is redundant and does not serve any functional role

Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Fix compilation issues

[Why]
Getting below build errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1419:3: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
                default:
                ^
drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:1535:2: error: unannotated fall-through between switch labels [-Werror,-Wimplicit-fallthrough]
        default:
        ^

drivers/gpu/drm/amd/amdgpu/../display/dc/bios/bios_parser2.c:3276:20: error: variable 'v1_5' is uninitialized when used here [-Werror,-Wuninitialized]
                        for (i = 0; i < v1_5->number_of_path; ++i)
                                        ^~~~

[How]
Fix compilation issues

Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/display: Remove unnecessary typecasts and fix build issues

[Why]
Getting below errors:
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1414:5: error: implicit conversion from enumeration type 'enum scan_direction_class' to different enumeration type 'enum dm_rotation_angle' [-Werror,-Wenum-conversion]
                                mode_lib->vba.SourceScan[k],
                                ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_32.c:1744:22: error: implicit conversion from enumeration type 'enum scan_direction_class' to different enumeration type 'enum dm_rotation_angle' [-Werror,-Wenum-conversion]
                        && (!(!IsVertical(mode_lib->vba.SourceScan[k])) || mode_lib->vba.DCCEnable[k] == true)) {
                               ~~~~~~~~~~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2 errors generated.

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/display_mode_vba_util_32.c:5484:18: error: implicit conversion from enumeration type 'RequestType' to different enumeration type 'enum RequestType' [-Werror,-Wenum-conversion]
                        RequestLuma = REQ_256Bytes;
                                    ~ ^~~~~~~~~~~~
18 errors of similar kind

[How]
1. Add typecast at relevant places
2. Move the enum RequestType definition ahead of declarations

Signed-off-by: Chandan Vurdigere Nataraj <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always flush the TLB on gfx8

The TLB on GFX8 stores each block of 8 PTEs where any of the valid bits
are set.

Fixes: 5255e146c99a ("drm/amdgpu: rework TLB flushing")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix limiting AV1 to the first instance on VCN3

The job is not yet initialized here.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2037
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: cdc7893fc93f ("drm/amdgpu: use job and ib structures directly in CS parsers")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable BACO on smu_v13_0_7

enable BACO on smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: add interface to deallocate power_context for smu_v13_0_7

add interface to deallocate power_context for smu_v13_0_7

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/jpeg2: Add jpeg vmid update under IB submit

Add jpeg vmid update under IB submit

Signed-off-by: Mohammad Zafar Ziya <Mohammadzafar.ziya@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/mes: only invalid/prime icache when finish loading both pipe MES FWs.

invalid/prime icahce operation takes effect both pipes cuconrrently,
therefore CP_MES_IC_BASE_LO/HI and CP_MES_MDBASE_LO/HI both have to be
set before prime icache. Otherwise MES hardware gets garbage data in
above regsters and causes page fault

[  470.873200] amdgpu 0000:33:00.0: amdgpu: [gfxhub] page fault (src_id:0 ring:217 vmid:0 pasid:0, for process  pid 0 thread  pid 0)
[  470.873222] amdgpu 0000:33:00.0: amdgpu:   in page starting at address 0x000092cb89b00000 from client 10
[  470.873234] amdgpu 0000:33:00.0: amdgpu: GCVM_L2_PROTECTION_FAULT_STATUS:0x00000BB3
[  470.873242] amdgpu 0000:33:00.0: amdgpu:      Faulty UTCL2 client ID: CPC (0x5)
[  470.873247] amdgpu 0000:33:00.0: amdgpu:      MORE_FAULTS: 0x1
[  470.873251] amdgpu 0000:33:00.0: amdgpu:      WALKER_ERROR: 0x1
[  470.873256] amdgpu 0000:33:00.0: amdgpu:      PERMISSION_FAULTS: 0xb
[  470.873260] amdgpu 0000:33:00.0: amdgpu:      MAPPING_ERROR: 0x1
[  470.873264] amdgpu 0000:33:00.0: amdgpu:      RW: 0x0

Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded dpm features disablement for SMU 13.0.0/7

PMFW will handle that properly. Driver involvement may cause some
unexpected issues.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop redundant declarations

Drop those redundant declarations in smu_v13_0.h.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable mode1 reset support for SMU 13.0.0

Fulfill the interfaces for mode1 reset related.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: avoid to perform undesired clockgating operation

Make sure the clockgating feature is supported before action.
Otherwise, the feature may be disabled unexpectedly on enablement
request.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: enable ASPM support for PCIE 7.4.0/7.6.0

Enable ASPM support for PCIE 7.4.0 and 7.6.0.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: optimize the interface for dpm feature status query

Drop extra CMN2ASIC_MAPPING_FEATURE transform. Also some cosmetic
fixes for better readability.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: drop unneeded thermal_controller_type check

As there is actually no direct dependence between them.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pm: enable FW CTF feature for SMU 13.0.0

The new 78.40.0 PMFW has this feature supported.

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix scratch register access method in SRIOV

The scratch register should be accessed through MMIO instead of RLCG
in SRIOV, since it being used in RLCG register access function.

Fixes: d54762cc3e6a ("drm/amdgpu: nuke dynamic gfx scratch reg allocation")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Initialize fences array entries in radeon_sa_bo_next_hole

Similar to the handling of amdgpu_sa_bo_next_hole in commit 6a15f3ff19a8
("drm/amdgpu: Initialize fences array entries in amdgpu_sa_bo_next_hole"),
we thought a patch might be needed here as well.

The entries were only initialized once in radeon_sa_bo_new. If a fence
wasn't signalled yet in the first radeon_sa_bo_next_hole call, but then
got signalled before a later radeon_sa_bo_next_hole call, it could
destroy the fence but leave its pointer in the array, resulting in
use-after-free in radeon_sa_bo_new.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Document and fix GTT BO kmap API

Removed an unused parameter from two functions and added kernel-doc
comments.

Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce frame size in the bouding box for DCN21

GCC throw warnings for the function dcn21_update_bw_bounding_box and
dcn316_update_bw_bounding_box due to its frame size that looks like
this:

 error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

For fixing this issue I dropped an intermadiate variable.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdkfd: Extend KFD device topology to surface peer-to-peer links

Extend KFD device topology to surface peer-to-peer links among
GPU devices connected over PCIe or xGMI. Enabling HSA_AMD_P2P is
REQUIRED to surface peer-to-peer links.

Prior to this KFD did not expose to user mode any P2P links or
indirect links that go over two or more direct hops. Old versions
of the Thunk used to make up their own P2P and indirect links without
the information about peer-accessibility and chipset support available
to the kernel mode driver. In this patch we expose P2P links in a new
sysfs directory to provide more reliable P2P link information to user
mode.

Old versions of the Thunk will continue to work as before and ignore
the new directory. This avoids conflicts between P2P links exposed by
KFD and P2P links created by the Thunk itself. New versions of the Thunk
will use only the P2P links provided in the new p2p_links directory, if
it exists, or fall back to the old code path on older KFDs that don't
expose p2p_links.

Signed-off-by: Ramesh Errabolu <Ramesh.Errabolu@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: integer overflow in radeon_mode_dumb_create()

Similar to the handling of amdgpu_mode_dumb_create in commit 54ef0b5461c0
("drm/amdgpu: integer overflow in amdgpu_mode_dumb_create()"),
we thought a patch might be needed here as well.

args->size is a u64.  arg->pitch and args->height are u32.  The
multiplication will overflow instead of using the high 32 bits as
intended.

Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify amdgpu_ucode_get_load_type()

This is the same as the default case, so drop the extra
logic.

Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Reduce frame size in the bouding box for DCN31/316

GCC throw warnings for the function dcn31_update_bw_bounding_box and
dcn316_update_bw_bounding_box due to its frame size that looks like
this:

 error: the frame size of 1936 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

For fixing this issue I dropped an intermadiate variable.

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>