Mark Pearson [Tue, 24 Jan 2023 15:36:23 +0000 (10:36 -0500)]
platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms
commit
1bc5d819f0b9784043ea08570e1b21107aa35739 upstream.
My last commit to fix profile mode displays on AMD platforms caused
an issue on Intel platforms - sorry!
In it I was reading the current functional mode (MMC, PSC, AMT) from
the BIOS but didn't account for the fact that on some of our Intel
platforms I use a different API which returns just the profile and not
the functional mode.
This commit fixes it so that on Intel platforms it knows the functional
mode is always MMC.
I also fixed a potential problem that a platform may try to set the mode
for both MMC and PSC - which was incorrect.
Tested on X1 Carbon 9 (Intel) and Z13 (AMD).
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216963
Fixes:
fde5f74ccfc7 ("platform/x86: thinkpad_acpi: Fix profile mode display in AMT mode")
Cc: stable@vger.kernel.org
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230124153623.145188-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 18 Jan 2023 15:08:50 +0000 (20:38 +0530)]
EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
commit
977c6ba624f24ae20cf0faee871257a39348d4a9 upstream.
The memory for llcc_driv_data is allocated by the LLCC driver. But when
it is passed as the private driver info to the EDAC core, it will get freed
during the qcom_edac driver release. So when the qcom_edac driver gets probed
again, it will try to use the freed data leading to the use-after-free bug.
Hence, do not pass llcc_driv_data as pvt_info but rather reference it
using the platform_data pointer in the qcom_edac driver.
Fixes:
27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs")
Reported-by: Steev Klimaszewski <steev@kali.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Cc: <stable@vger.kernel.org> # 4.20
Link: https://lore.kernel.org/r/20230118150904.26913-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manivannan Sadhasivam [Wed, 18 Jan 2023 15:08:48 +0000 (20:38 +0530)]
EDAC/device: Respect any driver-supplied workqueue polling value
commit
cec669ff716cc83505c77b242aecf6f7baad869d upstream.
The EDAC drivers may optionally pass the poll_msec value. Use that value
if available, else fall back to 1000ms.
[ bp: Touchups. ]
Fixes:
e27e3dac6517 ("drivers/edac: add edac_device class")
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Steev Klimaszewski <steev@kali.org> # Thinkpad X13s
Tested-by: Andrew Halaney <ahalaney@redhat.com> # sa8540p-ride
Cc: <stable@vger.kernel.org> # 4.9
Link: https://lore.kernel.org/r/COZYL8MWN97H.MROQ391BGA09@otso
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Giulio Benetti [Tue, 13 Dec 2022 19:24:03 +0000 (20:24 +0100)]
ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
commit
a4e03921c1bb118e6718e0a3b0322a2c13ed172b upstream.
zero_page is a void* pointer but memblock_alloc() returns phys_addr_t type
so this generates a warning while using clang and with -Wint-error enabled
that becomes and error. So let's cast the return of memblock_alloc() to
(void *).
Cc: <stable@vger.kernel.org> # 4.14.x +
Fixes:
340a982825f7 ("ARM: 9266/1: mm: fix no-MMU ZERO_PAGE() implementation")
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gergely Risko [Thu, 19 Jan 2023 13:40:41 +0000 (14:40 +0100)]
ipv6: fix reachability confirmation with proxy_ndp
commit
9f535c870e493841ac7be390610ff2edec755762 upstream.
When proxying IPv6 NDP requests, the adverts to the initial multicast
solicits are correct and working. On the other hand, when later a
reachability confirmation is requested (on unicast), no reply is sent.
This causes the neighbor entry expiring on the sending node, which is
mostly a non-issue, as a new multicast request is sent. There are
routers, where the multicast requests are intentionally delayed, and in
these environments the current implementation causes periodic packet
loss for the proxied endpoints.
The root cause is the erroneous decrease of the hop limit, as this
is checked in ndisc.c and no answer is generated when it's 254 instead
of the correct 255.
Cc: stable@vger.kernel.org
Fixes:
46c7655f0b56 ("ipv6: decrease hop limit counter in ip6_forward()")
Signed-off-by: Gergely Risko <gergely.risko@gmail.com>
Tested-by: Gergely Risko <gergely.risko@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Krzysztof Kozlowski [Fri, 20 Jan 2023 13:14:47 +0000 (14:14 +0100)]
regulator: dt-bindings: samsung,s2mps14: add lost samsung,ext-control-gpios
commit
4bb3d82a1820c1b609ede8eb2332f3cb038c5840 upstream.
The samsung,ext-control-gpios property was lost during conversion to DT
schema:
exynos3250-artik5-eval.dtb: pmic@66: regulators:LDO11: Unevaluated properties are not allowed ('samsung,ext-control-gpios' was unexpected)
Fixes:
ea98b9eba05c ("regulator: dt-bindings: samsung,s2m: convert to dtschema")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230120131447.289702-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Srinivas Pandruvada [Mon, 23 Jan 2023 17:21:10 +0000 (09:21 -0800)]
thermal: intel: int340x: Protect trip temperature from concurrent updates
commit
6757a7abe47bcb12cb2d45661067e182424b0ee3 upstream.
Trip temperatures are read using ACPI methods and stored in the memory
during zone initializtion and when the firmware sends a notification for
change. This trip temperature is returned when the thermal core calls via
callback get_trip_temp().
But it is possible that while updating the memory copy of the trips when
the firmware sends a notification for change, thermal core is reading the
trip temperature via the callback get_trip_temp(). This may return invalid
trip temperature.
To address this add a mutex to protect the invalid temperature reads in
the callback get_trip_temp() and int340x_thermal_read_trips().
Fixes:
5fbf7f27fa3d ("Thermal/int340x: Add common thermal zone handler")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 5.0+ <stable@vger.kernel.org> # 5.0+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Masahiro Yamada [Fri, 6 Jan 2023 16:12:13 +0000 (01:12 +0900)]
riscv: fix -Wundef warning for CONFIG_RISCV_BOOT_SPINWAIT
commit
5b89c6f9b2df2b7cf6da8e0b2b87c8995b378cad upstream.
Since commit
80b6093b55e3 ("kbuild: add -Wundef to KBUILD_CPPFLAGS
for W=1 builds"), building with W=1 detects misuse of #if.
$ make W=1 ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- arch/riscv/kernel/
[snip]
AS arch/riscv/kernel/head.o
arch/riscv/kernel/head.S:329:5: warning: "CONFIG_RISCV_BOOT_SPINWAIT" is not defined, evaluates to 0 [-Wundef]
329 | #if CONFIG_RISCV_BOOT_SPINWAIT
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
CONFIG_RISCV_BOOT_SPINWAIT is a bool option. #ifdef should be used.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Fixes:
2ffc48fc7071 ("RISC-V: Move spinwait booting method to its own config")
Link: https://lore.kernel.org/r/20230106161213.2374093-1-masahiroy@kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Mon, 16 Jan 2023 16:12:01 +0000 (17:12 +0100)]
scsi: ufs: core: Fix devfreq deadlocks
commit
ba81043753fffbc2ad6e0c5ff2659f12ac2f46b4 upstream.
There is a lock inversion and rwsem read-lock recursion in the devfreq
target callback which can lead to deadlocks.
Specifically, ufshcd_devfreq_scale() already holds a clk_scaling_lock
read lock when toggling the write booster, which involves taking the
dev_cmd mutex before taking another clk_scaling_lock read lock.
This can lead to a deadlock if another thread:
1) tries to acquire the dev_cmd and clk_scaling locks in the correct
order, or
2) takes a clk_scaling write lock before the attempt to take the
clk_scaling read lock a second time.
Fix this by dropping the clk_scaling_lock before toggling the write booster
as was done before commit
0e9d4ca43ba8 ("scsi: ufs: Protect some contexts
from unexpected clock scaling").
While the devfreq callbacks are already serialised, add a second
serialising mutex to handle the unlikely case where a callback triggered
through the devfreq sysfs interface is racing with a request to disable
clock scaling through the UFS controller 'clkscale_enable' sysfs
attribute. This could otherwise lead to the write booster being left
disabled after having disabled clock scaling.
Also take the new mutex in ufshcd_clk_scaling_allow() to make sure that any
pending write booster update has completed on return.
Note that this currently only affects Qualcomm platforms since commit
87bd05016a64 ("scsi: ufs: core: Allow host driver to disable wb toggling
during clock scaling").
The lock inversion (i.e. 1 above) was reported by lockdep as:
======================================================
WARNING: possible circular locking dependency detected
6.1.0-next-
20221216 #211 Not tainted
------------------------------------------------------
kworker/u16:2/71 is trying to acquire lock:
ffff076280ba98a0 (&hba->dev_cmd.lock){+.+.}-{3:3}, at: ufshcd_query_flag+0x50/0x1c0
but task is already holding lock:
ffff076280ba9cf0 (&hba->clk_scaling_lock){++++}-{3:3}, at: ufshcd_devfreq_scale+0x2b8/0x380
which lock already depends on the new lock.
[ +0.011606]
the existing dependency chain (in reverse order) is:
-> #1 (&hba->clk_scaling_lock){++++}-{3:3}:
lock_acquire+0x68/0x90
down_read+0x58/0x80
ufshcd_exec_dev_cmd+0x70/0x2c0
ufshcd_verify_dev_init+0x68/0x170
ufshcd_probe_hba+0x398/0x1180
ufshcd_async_scan+0x30/0x320
async_run_entry_fn+0x34/0x150
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
-> #0 (&hba->dev_cmd.lock){+.+.}-{3:3}:
__lock_acquire+0x12a0/0x2240
lock_acquire.part.0+0xcc/0x220
lock_acquire+0x68/0x90
__mutex_lock+0x98/0x430
mutex_lock_nested+0x2c/0x40
ufshcd_query_flag+0x50/0x1c0
ufshcd_query_flag_retry+0x64/0x100
ufshcd_wb_toggle+0x5c/0x120
ufshcd_devfreq_scale+0x2c4/0x380
ufshcd_devfreq_target+0xf4/0x230
devfreq_set_target+0x84/0x2f0
devfreq_update_target+0xc4/0xf0
devfreq_monitor+0x38/0x1f0
process_one_work+0x288/0x6c0
worker_thread+0x74/0x450
kthread+0x118/0x120
ret_from_fork+0x10/0x20
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
lock(&hba->clk_scaling_lock);
lock(&hba->dev_cmd.lock);
*** DEADLOCK ***
Fixes:
0e9d4ca43ba8 ("scsi: ufs: Protect some contexts from unexpected clock scaling")
Cc: stable@vger.kernel.org # 5.12
Cc: Can Guo <quic_cang@quicinc.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230116161201.16923-1-johan+linaro@kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Thu, 19 Jan 2023 11:07:59 +0000 (11:07 +0000)]
KVM: arm64: GICv4.1: Fix race with doorbell on VPE activation/deactivation
commit
ef3691683d7bfd0a2acf48812e4ffe894f10bfa8 upstream.
To save the vgic LPI pending state with GICv4.1, the VPEs must all be
unmapped from the ITSs so that the sGIC caches can be flushed.
The opposite is done once the state is saved.
This is all done by using the activate/deactivate irqdomain callbacks
directly from the vgic code. Crutially, this is done without holding
the irqdesc lock for the interrupts that represent the VPE. And these
callbacks are changing the state of the irqdesc. What could possibly
go wrong?
If a doorbell fires while we are messing with the irqdesc state,
it will acquire the lock and change the interrupt state concurrently.
Since we don't hole the lock, curruption occurs in on the interrupt
state. Oh well.
While acquiring the lock would fix this (and this was Shanker's
initial approach), this is still a layering violation we could do
without. A better approach is actually to free the VPE interrupt,
do what we have to do, and re-request it.
It is more work, but this usually happens only once in the lifetime
of the VM and we don't really care about this sort of overhead.
Fixes:
f66b7b151e00 ("KVM: arm64: GICv4.1: Try to save VLPI state in save_pending_tables")
Reported-by: Shanker Donthineni <sdonthineni@nvidia.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230118022348.4137094-1-sdonthineni@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hendrik Borghorst [Mon, 14 Nov 2022 16:48:23 +0000 (16:48 +0000)]
KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
commit
a44b331614e6f7e63902ed7dff7adc8c85edd8bc upstream.
When serializing and deserializing kvm_sregs, attributes of the segment
descriptors are stored by user space. For unusable segments,
vmx_segment_access_rights skips all attributes and sets them to 0.
This means we zero out the DPL (Descriptor Privilege Level) for unusable
entries.
Unusable segments are - contrary to their name - usable in 64bit mode and
are used by guests to for example create a linear map through the
NULL selector.
VMENTER checks if SS.DPL is correct depending on the CS segment type.
For types 9 (Execute Only) and 11 (Execute Read), CS.DPL must be equal to
SS.DPL [1].
We have seen real world guests setting CS to a usable segment with DPL=3
and SS to an unusable segment with DPL=3. Once we go through an sregs
get/set cycle, SS.DPL turns to 0. This causes the virtual machine to crash
reproducibly.
This commit changes the attribute logic to always preserve attributes for
unusable segments. According to [2] SS.DPL is always saved on VM exits,
regardless of the unusable bit so user space applications should have saved
the information on serialization correctly.
[3] specifies that besides SS.DPL the rest of the attributes of the
descriptors are undefined after VM entry if unusable bit is set. So, there
should be no harm in setting them all to the previous state.
[1] Intel SDM Vol 3C 26.3.1.2 Checks on Guest Segment Registers
[2] Intel SDM Vol 3C 27.3.2 Saving Segment Registers and Descriptor-Table
Registers
[3] Intel SDM Vol 3C 26.3.2.2 Loading Guest Segment Registers and
Descriptor-Table Registers
Cc: Alexander Graf <graf@amazon.de>
Cc: stable@vger.kernel.org
Signed-off-by: Hendrik Borghorst <hborghor@amazon.de>
Reviewed-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Message-Id: <
20221114164823.69555-1-hborghor@amazon.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jens Axboe [Sun, 22 Jan 2023 17:02:55 +0000 (10:02 -0700)]
io_uring/net: cache provided buffer group value for multishot receives
commit
b00c51ef8f72ced0965d021a291b98ff822c5337 upstream.
If we're using ring provided buffers with multishot receive, and we end
up doing an io-wq based issue at some points that also needs to select
a buffer, we'll lose the initially assigned buffer group as
io_ring_buffer_select() correctly clears the buffer group list as the
issue isn't serialized by the ctx uring_lock. This is fine for normal
receives as the request puts the buffer and finishes, but for multishot,
we will re-arm and do further receives. On the next trigger for this
multishot receive, the receive will try and pick from a buffer group
whose value is the same as the buffer ID of the las receive. That is
obviously incorrect, and will result in a premature -ENOUFS error for
the receive even if we had available buffers in the correct group.
Cache the buffer group value at prep time, so we can restore it for
future receives. This only needs doing for the above mentioned case, but
just do it by default to keep it easier to read.
Cc: stable@vger.kernel.org
Fixes:
b3fdea6ecb55 ("io_uring: multishot recv")
Fixes:
9bb66906f23e ("io_uring: support multishot in recvmsg")
Cc: Dylan Yudaken <dylany@meta.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Tue, 24 Jan 2023 15:41:18 +0000 (16:41 +0100)]
ovl: fail on invalid uid/gid mapping at copy up
commit
4f11ada10d0ad3fd53e2bd67806351de63a4f9c3 upstream.
If st_uid/st_gid doesn't have a mapping in the mounter's user_ns, then
copy-up should fail, just like it would fail if the mounter task was doing
the copy using "cp -a".
There's a corner case where the "cp -a" would succeed but copy up fail: if
there's a mapping of the invalid uid/gid (65534 by default) in the user
namespace. This is because stat(2) will return this value if the mapping
doesn't exist in the current user_ns and "cp -a" will in turn be able to
create a file with this uid/gid.
This behavior would be inconsistent with POSIX ACL's, which return -1 for
invalid uid/gid which result in a failed copy.
For consistency and simplicity fail the copy of the st_uid/st_gid are
invalid.
Fixes:
459c7c565ac3 ("ovl: unprivieged mounts")
Cc: <stable@vger.kernel.org> # v5.11
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Seth Forshee <sforshee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Miklos Szeredi [Tue, 24 Jan 2023 15:41:18 +0000 (16:41 +0100)]
ovl: fix tmpfile leak
commit
baabaa505563362b71f2637aedd7b807d270656c upstream.
Missed an error cleanup.
Reported-by: syzbot+fd749a7ea127a84e0ffd@syzkaller.appspotmail.com
Fixes:
2b1a77461f16 ("ovl: use vfs_tmpfile_open() helper")
Cc: <stable@vger.kernel.org> # v6.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 24 Jan 2023 15:13:20 +0000 (00:13 +0900)]
ksmbd: limit pdu length size according to connection status
commit
62c487b53a7ff31e322cf2874d3796b8202c54a5 upstream.
Stream protocol length will never be larger than 16KB until session setup.
After session setup, the size of requests will not be larger than
16KB + SMB2 MAX WRITE size. This patch limits these invalidly oversized
requests and closes the connection immediately.
Fixes:
0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18259
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Tue, 24 Jan 2023 15:09:02 +0000 (00:09 +0900)]
ksmbd: downgrade ndr version error message to debug
commit
a34dc4a9b9e2fb3a45c179a60bb0b26539c96189 upstream.
When user switch samba to ksmbd, The following message flood is coming
when accessing files. Samba seems to changs dos attribute version to v5.
This patch downgrade ndr version error message to debug.
$ dmesg
...
[68971.766914] ksmbd: v5 version is not supported
[68971.779808] ksmbd: v5 version is not supported
[68971.871544] ksmbd: v5 version is not supported
[68971.910135] ksmbd: v5 version is not supported
...
Cc: stable@vger.kernel.org
Fixes:
e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marios Makassikis [Wed, 11 Jan 2023 16:39:02 +0000 (17:39 +0100)]
ksmbd: do not sign response to session request for guest login
commit
5fde3c21cf33830eda7bfd006dc7f4bf07ec9fe6 upstream.
If ksmbd.mountd is configured to assign unknown users to the guest account
("map to guest = bad user" in the config), ksmbd signs the response.
This is wrong according to MS-SMB2 3.3.5.5.3:
12. If the SMB2_SESSION_FLAG_IS_GUEST bit is not set in the SessionFlags
field, and Session.IsAnonymous is FALSE, the server MUST sign the
final session setup response before sending it to the client, as
follows:
[...]
This fixes libsmb2 based applications failing to establish a session
("Wrong signature in received").
Fixes:
e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Namjae Jeon [Thu, 29 Dec 2022 09:33:25 +0000 (18:33 +0900)]
ksmbd: add max connections parameter
commit
0d0d4680db22eda1eea785c47bbf66a9b33a8b16 upstream.
Add max connections parameter to limit number of maximum simultaneous
connections.
Fixes:
0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Howells [Wed, 25 Jan 2023 14:02:13 +0000 (14:02 +0000)]
cifs: Fix oops due to uncleared server->smbd_conn in reconnect
commit
b7ab9161cf5ddc42a288edf9d1a61f3bdffe17c7 upstream.
In smbd_destroy(), clear the server->smbd_conn pointer after freeing the
smbd_connection struct that it points to so that reconnection doesn't get
confused.
Fixes:
8ef130f9ec27 ("CIFS: SMBD: Implement function to destroy a SMB Direct connection")
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: Long Li <longli@microsoft.com>
Cc: Pavel Shilovsky <piastryyy@gmail.com>
Cc: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Mon, 23 Jan 2023 16:22:52 +0000 (11:22 -0500)]
ftrace/scripts: Update the instructions for ftrace-bisect.sh
commit
7ae4ba7195b1bac04a4210a499da9d8c63b0ba9c upstream.
The instructions for the ftrace-bisect.sh script, which is used to find
what function is being traced that is causing a kernel crash, and possibly
a triple fault reboot, uses the old method. In 5.1, a new feature was
added that let the user write in the index into available_filter_functions
that maps to the function a user wants to set in set_ftrace_filter (or
set_ftrace_notrace). This takes O(1) to set, as suppose to writing a
function name, which takes O(n) (where n is the number of functions in
available_filter_functions).
The ftrace-bisect.sh requires setting half of the functions in
available_filter_functions, which is O(n^2) using the name method to enable
and can take several minutes to complete. The number method is O(n) which
takes less than a second to complete. Using the number method for any
kernel 5.1 and after is the proper way to do the bisect.
Update the usage to reflect the new change, as well as using the
/sys/kernel/tracing path instead of the obsolete debugfs path.
Link: https://lkml.kernel.org/r/20230123112252.022003dd@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Fixes:
f79b3f338564e ("ftrace: Allow enabling of filters via index of available_filter_functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Natalia Petrova [Wed, 11 Jan 2023 12:04:09 +0000 (15:04 +0300)]
trace_events_hist: add check for return value of 'create_hist_field'
commit
8b152e9150d07a885f95e1fd401fc81af202d9a4 upstream.
Function 'create_hist_field' is called recursively at
trace_events_hist.c:1954 and can return NULL-value that's why we have
to check it to avoid null pointer dereference.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Link: https://lkml.kernel.org/r/20230111120409.4111-1-n.petrova@fintech.ru
Cc: stable@vger.kernel.org
Fixes:
30350d65ac56 ("tracing: Add variable support to hist triggers")
Signed-off-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Steven Rostedt (Google) [Wed, 4 Jan 2023 21:14:12 +0000 (16:14 -0500)]
tracing: Make sure trace_printk() can output as soon as it can be used
commit
3bb06eb6e9acf7c4a3e1b5bc87aed398ff8e2253 upstream.
Currently trace_printk() can be used as soon as early_trace_init() is
called from start_kernel(). But if a crash happens, and
"ftrace_dump_on_oops" is set on the kernel command line, all you get will
be:
[ 0.456075] <idle>-0 0dN.2. 347519us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 353141us : Unknown type 6
[ 0.456075] <idle>-0 0dN.2. 358684us : Unknown type 6
This is because the trace_printk() event (type 6) hasn't been registered
yet. That gets done via an early_initcall(), which may be early, but not
early enough.
Instead of registering the trace_printk() event (and other ftrace events,
which are not trace events) via an early_initcall(), have them registered at
the same time that trace_printk() can be used. This way, if there is a
crash before early_initcall(), then the trace_printk()s will actually be
useful.
Link: https://lkml.kernel.org/r/20230104161412.019f6c55@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
e725c731e3bb1 ("tracing: Split tracing initialization into two for early initialization")
Reported-by: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Tested-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Tue, 3 Jan 2023 12:49:11 +0000 (12:49 +0000)]
ftrace: Export ftrace_free_filter() to modules
commit
8be9fbd5345da52f4a74f7f81d55ff9fa0a2958e upstream.
Setting filters on an ftrace ops results in some memory being allocated
for the filter hashes, which must be freed before the ops can be freed.
This can be done by removing every individual element of the hash by
calling ftrace_set_filter_ip() or ftrace_set_filter_ips() with `remove`
set, but this is somewhat error prone as it's easy to forget to remove
an element.
Make it easier to clean this up by exporting ftrace_free_filter(), which
can be used to clean up all of the filter hashes after an ftrace_ops has
been unregistered.
Using this, fix the ftrace-direct* samples to free hashes prior to being
unloaded. All other code either removes individual filters explicitly or
is built-in and already calls ftrace_free_filter().
Link: https://lkml.kernel.org/r/20230103124912.2948963-3-mark.rutland@arm.com
Cc: stable@vger.kernel.org
Cc: Florent Revest <revest@chromium.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Fixes:
e1067a07cfbc ("ftrace/samples: Add module to test multi direct modify interface")
Fixes:
5fae941b9a6f ("ftrace/samples: Add multi direct interface test module")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Petr Pavlu [Mon, 5 Dec 2022 10:35:57 +0000 (11:35 +0100)]
module: Don't wait for GOING modules
commit
0254127ab977e70798707a7a2b757c9f3c971210 upstream.
During a system boot, it can happen that the kernel receives a burst of
requests to insert the same module but loading it eventually fails
during its init call. For instance, udev can make a request to insert
a frequency module for each individual CPU when another frequency module
is already loaded which causes the init function of the new module to
return an error.
Since commit
6e6de3dee51a ("kernel/module.c: Only return -EEXIST for
modules that have finished loading"), the kernel waits for modules in
MODULE_STATE_GOING state to finish unloading before making another
attempt to load the same module.
This creates unnecessary work in the described scenario and delays the
boot. In the worst case, it can prevent udev from loading drivers for
other devices and might cause timeouts of services waiting on them and
subsequently a failed boot.
This patch attempts a different solution for the problem
6e6de3dee51a
was trying to solve. Rather than waiting for the unloading to complete,
it returns a different error code (-EBUSY) for modules in the GOING
state. This should avoid the error situation that was described in
6e6de3dee51a (user space attempting to load a dependent module because
the -EEXIST error code would suggest to user space that the first module
had been loaded successfully), while avoiding the delay situation too.
This has been tested on linux-next since December 2022 and passes
all kmod selftests except test 0009 with module compression enabled
but it has been confirmed that this issue has existed and has gone
unnoticed since prior to this commit and can also be reproduced without
module compression with a simple usleep(5000000) on tools/modprobe.c [0].
These failures are caused by hitting the kernel mod_concurrent_max and can
happen either due to a self inflicted kernel module auto-loead DoS somehow
or on a system with large CPU count and each CPU count incorrectly triggering
many module auto-loads. Both of those issues need to be fixed in-kernel.
[0] https://lore.kernel.org/all/Y9A4fiobL6IHp%2F%2FP@bombadil.infradead.org/
Fixes:
6e6de3dee51a ("kernel/module.c: Only return -EEXIST for modules that have finished loading")
Co-developed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Cc: stable@vger.kernel.org
Reviewed-by: Petr Mladek <pmladek@suse.com>
[mcgrof: enhance commit log with testing and kmod test result interpretation ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jeff Layton [Fri, 20 Jan 2023 19:52:14 +0000 (14:52 -0500)]
nfsd: don't free files unconditionally in __nfsd_file_cache_purge
[ Upstream commit
4bdbba54e9b1c769da8ded9abd209d765715e1d6 ]
nfsd_file_cache_purge is called when the server is shutting down, in
which case, tearing things down is generally fine, but it also gets
called when the exports cache is flushed.
Instead of walking the cache and freeing everything unconditionally,
handle it the same as when we have a notification of conflicting access.
Fixes:
ac3a2585f018 ("nfsd: rework refcounting in filecache")
Reported-by: Ruben Vestergaard <rubenv@drcmr.dk>
Reported-by: Torkil Svensgaard <torkil@drcmr.dk>
Reported-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Tested-by: Shachar Kagan <skagan@nvidia.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yi Liu [Fri, 20 Jan 2023 15:05:28 +0000 (07:05 -0800)]
kvm/vfio: Fix potential deadlock on vfio group_lock
[ Upstream commit
51cdc8bc120ef6e42f6fb758341f5d91bc955952 ]
Currently it is possible that the final put of a KVM reference comes from
vfio during its device close operation. This occurs while the vfio group
lock is held; however, if the vfio device is still in the kvm device list,
then the following call chain could result in a deadlock:
VFIO holds group->group_lock/group_rwsem
-> kvm_put_kvm
-> kvm_destroy_vm
-> kvm_destroy_devices
-> kvm_vfio_destroy
-> kvm_vfio_file_set_kvm
-> vfio_file_set_kvm
-> try to hold group->group_lock/group_rwsem
The key function is the kvm_destroy_devices() which triggers destroy cb
of kvm_device_ops. It calls back to vfio and try to hold group_lock. So
if this path doesn't call back to vfio, this dead lock would be fixed.
Actually, there is a way for it. KVM provides another point to free the
kvm-vfio device which is the point when the device file descriptor is
closed. This can be achieved by providing the release cb instead of the
destroy cb. Also rename kvm_vfio_destroy() to be kvm_vfio_release().
/*
* Destroy is responsible for freeing dev.
*
* Destroy may be called before or after destructors are called
* on emulated I/O regions, depending on whether a reference is
* held by a vcpu or other kvm component that gets destroyed
* after the emulated I/O.
*/
void (*destroy)(struct kvm_device *dev);
/*
* Release is an alternative method to free the device. It is
* called when the device file descriptor is closed. Once
* release is called, the destroy method will not be called
* anymore as the device is removed from the device list of
* the VM. kvm->lock is held.
*/
void (*release)(struct kvm_device *dev);
Fixes:
421cfe6596f6 ("vfio: remove VFIO_GROUP_NOTIFY_SET_KVM")
Reported-by: Alex Williamson <alex.williamson@redhat.com>
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Link: https://lore.kernel.org/r/20230114000351.115444-1-mjrosato@linux.ibm.com
Link: https://lore.kernel.org/r/20230120150528.471752-1-yi.l.liu@intel.com
[aw: update comment as well, s/destroy/release/]
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexey V. Vissarionov [Wed, 18 Jan 2023 03:12:55 +0000 (06:12 +0300)]
scsi: hpsa: Fix allocation size for scsi_host_alloc()
[ Upstream commit
bbbd25499100c810ceaf5193c3cfcab9f7402a33 ]
The 'h' is a pointer to struct ctlr_info, so it's just 4 or 8 bytes, while
the structure itself is much bigger.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes:
edd163687ea5 ("hpsa: add driver for HP Smart Array controllers.")
Link: https://lore.kernel.org/r/20230118031255.GE15213@altlinux.org
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Acked-by: Don Brace <don.brace@microchip.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Schnelle [Tue, 10 Jan 2023 16:44:27 +0000 (17:44 +0100)]
vfio/type1: Respect IOMMU reserved regions in vfio_test_domain_fgsp()
[ Upstream commit
895c0747f726bb50c9b7a805613a61d1b6f9fa06 ]
Since commit
cbf7827bc5dc ("iommu/s390: Fix potential s390_domain
aperture shrinking") the s390 IOMMU driver uses reserved regions for the
system provided DMA ranges of PCI devices. Previously it reduced the
size of the IOMMU aperture and checked it on each mapping operation.
On current machines the system denies use of DMA addresses below 2^32 for
all PCI devices.
Usually mapping IOVAs in a reserved regions is harmless until a DMA
actually tries to utilize the mapping. However on s390 there is
a virtual PCI device called ISM which is implemented in firmware and
used for cross LPAR communication. Unlike real PCI devices this device
does not use the hardware IOMMU but inspects IOMMU translation tables
directly on IOTLB flush (s390 RPCIT instruction). If it detects IOVA
mappings outside the allowed ranges it goes into an error state. This
error state then causes the device to be unavailable to the KVM guest.
Analysing this we found that vfio_test_domain_fgsp() maps 2 pages at DMA
address 0 irrespective of the IOMMUs reserved regions. Even if usually
harmless this seems wrong in the general case so instead go through the
freshly updated IOVA list and try to find a range that isn't reserved,
and fits 2 pages, is PAGE_SIZE * 2 aligned. If found use that for
testing for fine grained super pages.
Fixes:
af029169b8fd ("vfio/type1: Check reserved region conflict and update iova list")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20230110164427.4051938-2-schnelle@linux.ibm.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Qais Yousef [Thu, 12 Jan 2023 12:27:07 +0000 (12:27 +0000)]
sched/uclamp: Fix a uninitialized variable warnings
[ Upstream commit
e26fd28db82899be71b4b949527373d0a6be1e65 ]
Addresses the following warnings:
> config: riscv-randconfig-m031-
20221111
> compiler: riscv64-linux-gcc (GCC) 12.1.0
>
> smatch warnings:
> kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_min'.
> kernel/sched/fair.c:7263 find_energy_efficient_cpu() error: uninitialized symbol 'util_max'.
Fixes:
244226035a1f ("sched/uclamp: Fix fits_capacity() check in feec()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230112122708.330667-2-qyousef@layalina.io
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre Gondois [Thu, 6 Oct 2022 08:10:52 +0000 (10:10 +0200)]
sched/fair: Check if prev_cpu has highest spare cap in feec()
[ Upstream commit
ad841e569f5c88e3332b32a000f251f33ff32187 ]
When evaluating the CPU candidates in the perf domain (pd) containing
the previously used CPU (prev_cpu), find_energy_efficient_cpu()
evaluates the energy of the pd:
- without the task (base_energy)
- with the task placed on prev_cpu (if the task fits)
- with the task placed on the CPU with the highest spare capacity,
prev_cpu being excluded from this set
If prev_cpu is already the CPU with the highest spare capacity,
max_spare_cap_cpu will be the CPU with the second highest spare
capacity.
On an Arm64 Juno-r2, with a workload of 10 tasks at a 10% duty cycle,
when prev_cpu and max_spare_cap_cpu are both valid candidates,
prev_spare_cap > max_spare_cap at ~82%.
Thus the energy of the pd when placing the task on max_spare_cap_cpu
is computed with no possible positive outcome 82% most of the time.
Do not consider max_spare_cap_cpu as a valid candidate if
prev_spare_cap > max_spare_cap.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20221006081052.3862167-2-pierre.gondois@arm.com
Stable-dep-of:
e26fd28db828 ("sched/uclamp: Fix a uninitialized variable warnings")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Wetzel [Fri, 6 Jan 2023 22:31:41 +0000 (23:31 +0100)]
wifi: mac80211: Fix iTXQ AMPDU fragmentation handling
commit
592234e941f1addaa598601c9227e3b72d608625 upstream.
mac80211 must not enable aggregation wile transmitting a fragmented
MPDU. Enforce that for mac80211 internal TX queues (iTXQs).
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202301021738.7cd3e6ae-oliver.sang@intel.com
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20230106223141.98696-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Wetzel [Fri, 30 Dec 2022 12:18:49 +0000 (13:18 +0100)]
wifi: mac80211: Proper mark iTXQs for resumption
commit
4444bc2116aecdcde87dce80373540adc8bd478b upstream.
When a running wake_tx_queue() call is aborted due to a hw queue stop
the corresponding iTXQ is not always correctly marked for resumption:
wake_tx_push_queue() can stops the queue run without setting
@IEEE80211_TXQ_STOP_NETIF_TX.
Without the @IEEE80211_TXQ_STOP_NETIF_TX flag __ieee80211_wake_txqs()
will not schedule a new queue run and remaining frames in the queue get
stuck till another frame is queued to it.
Fix the issue for all drivers - also the ones with custom wake_tx_queue
callbacks - by moving the logic into ieee80211_tx_dequeue() and drop the
redundant @txqs_stopped.
@IEEE80211_TXQ_STOP_NETIF_TX is also renamed to @IEEE80211_TXQ_DIRTY to
better describe the flag.
Fixes:
c850e31f79f0 ("wifi: mac80211: add internal handler for wake_tx_queue")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Link: https://lore.kernel.org/r/20221230121850.218810-1-alexander@wetzel-home.de
Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Begunkov [Fri, 20 Jan 2023 16:38:06 +0000 (16:38 +0000)]
io_uring/msg_ring: fix remote queue to disabled ring
commit
8579538c89e33ce78be2feb41e07489c8cbf8f31 upstream.
IORING_SETUP_R_DISABLED rings don't have the submitter task set, so
it's not always safe to use ->submitter_task. Disallow posting msg_ring
messaged to disabled rings. Also add task NULL check for loosy sync
around testing for IORING_SETUP_R_DISABLED.
Cc: stable@vger.kernel.org
Fixes:
6d043ee1164ca ("io_uring: do msg_ring in target task via tw")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harsh Jain [Wed, 2 Nov 2022 09:53:08 +0000 (15:23 +0530)]
drm/amdgpu: complete gfxoff allow signal during suspend without delay
commit
4b31b92b143f7d209f3d494c56d4c4673e9fc53d upstream.
change guarantees that gfxoff is allowed before moving further in
s2idle sequence to add more reliablity about gfxoff in amdgpu IP's
suspend flow
Signed-off-by: Harsh Jain <harsh.jain@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: "Limonciello, Mario" <Mario.Limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ville Syrjälä [Tue, 27 Sep 2022 18:06:14 +0000 (21:06 +0300)]
drm/i915: Allow alternate fixed modes always for eDP
[ Upstream commit
55cfeecc2197de68e9cc30f77c711dcbcdf27510 ]
Stop considering VBT's static DRRS support when deciding whether
to use alternate fixed modes or not. It looks like Windows more
or less just uses that to decide whether to automagically switch
refresh rates on AC<->battery changes, or perhaps whether to
even expose a control for that in some UI thing. Either way it
seems happy to always use all EDID modes, and I guess the
DRRS/VRR stuff more or less adjusts how said modes get
actually used.
Let's do the same and just accept all the suitable looking
modes from EDID, whether we have DRRS or VRR.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6323
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6484
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220927180615.25476-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ville Syrjälä [Thu, 20 Oct 2022 09:39:38 +0000 (12:39 +0300)]
drm/i915: Allow panel fixed modes to have differing sync polarities
[ Upstream commit
2bd0db4b3f0bd529f75b32538fc5a3775e3591c0 ]
Apparently some panels declare multiple modes with random
sync polarities. Seems a bit weird, but looks like Windows/GOP
doesn't care, so let follow suit and accept alternate fixed
modes regardless of their sync polarities.
v2: Don't pollute the DRM_ namespace with a define (Jani)
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6968
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221020093938.27200-1-ville.syrjala@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Archie Pusaka [Thu, 26 Jan 2023 13:36:13 +0000 (16:36 +0300)]
Bluetooth: hci_sync: cancel cmd_timer if hci_open failed
commit
97dfaf073f5881c624856ef293be307b6166115c upstream.
If a command is already sent, we take care of freeing it, but we
also need to cancel the timeout as well.
Signed-off-by: Archie Pusaka <apusaka@chromium.org>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Fri, 9 Dec 2022 11:10:13 +0000 (12:10 +0100)]
arm64: efi: Account for the EFI runtime stack in stack unwinder
[ Upstream commit
7ea55715c421d22c1b63f7129cae6a654091b695 ]
The EFI runtime services run from a dedicated stack now, and so the
stack unwinder needs to be informed about this.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Fri, 28 Oct 2022 14:39:14 +0000 (16:39 +0200)]
arm64: efi: Avoid workqueue to check whether EFI runtime is live
[ Upstream commit
8a9a1a18731eb123e35f48176380a18b9782845e ]
Comparing current_work() against efi_rts_work.work is sufficient to
decide whether current is currently running EFI runtime services code at
any level in its call stack.
However, there are other potential users of the EFI runtime stack, such
as the ACPI subsystem, which may invoke efi_call_virt_pointer()
directly, and so any sync exceptions occurring in firmware during those
calls are currently misidentified.
So instead, let's check whether the stashed value of the thread stack
pointer points into current's thread stack. This can only be the case if
current was interrupted while running EFI runtime code. Note that this
implies that we should clear the stashed value after switching back, to
avoid false positives.
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ard Biesheuvel [Fri, 28 Oct 2022 14:39:14 +0000 (16:39 +0200)]
arm64: efi: Recover from synchronous exceptions occurring in firmware
[ Upstream commit
e8dfdf3162eb549d064b8c10b1564f7e8ee82591 ]
Unlike x86, which has machinery to deal with page faults that occur
during the execution of EFI runtime services, arm64 has nothing like
that, and a synchronous exception raised by firmware code brings down
the whole system.
With more EFI based systems appearing that were not built to run Linux
(such as the Windows-on-ARM laptops based on Qualcomm SOCs), as well as
the introduction of PRM (platform specific firmware routines that are
callable just like EFI runtime services), we are more likely to run into
issues of this sort, and it is much more likely that we can identify and
work around such issues if they don't bring down the system entirely.
Since we already use a EFI runtime services call wrapper in assembler,
we can quite easily add some code that captures the execution state at
the point where the call is made, allowing us to revert to this state
and proceed execution if the call triggered a synchronous exception.
Given that the kernel and the firmware don't share any data structures
that could end up in an indeterminate state, we can happily continue
running, as long as we mark the EFI runtime services as unavailable from
that point on.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of:
8a9a1a18731e ("arm64: efi: Avoid workqueue to check whether EFI runtime is live")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Tue, 24 Jan 2023 12:04:13 +0000 (07:04 -0500)]
Revert "selftests/bpf: check null propagation only neither reg is PTR_TO_BTF_ID"
This reverts commit
2e5d5c4ae77dedc7eba0e496474ab93f05b25adf.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Naohiro Aota [Tue, 10 Jan 2023 06:04:32 +0000 (15:04 +0900)]
btrfs: zoned: enable metadata over-commit for non-ZNS setup
[ Upstream commit
85e79ec7b78f863178ca488fd8cb5b3de6347756 ]
The commit
79417d040f4f ("btrfs: zoned: disable metadata overcommit for
zoned") disabled the metadata over-commit to track active zones properly.
However, it also introduced a heavy overhead by allocating new metadata
block groups and/or flushing dirty buffers to release the space
reservations. Specifically, a workload (write only without any sync
operations) worsen its performance from 343.77 MB/sec (v5.19) to 182.89
MB/sec (v6.0).
The performance is still bad on current misc-next which is 187.95 MB/sec.
And, with this patch applied, it improves back to 326.70 MB/sec (+73.82%).
This patch introduces a new fs_info->flag BTRFS_FS_NO_OVERCOMMIT to
indicate it needs to disable the metadata over-commit. The flag is enabled
when a device with max active zones limit is loaded into a file-system.
Fixes:
79417d040f4f ("btrfs: zoned: disable metadata overcommit for zoned")
CC: stable@vger.kernel.org # 6.0+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Thu, 12 Jan 2023 23:03:16 +0000 (15:03 -0800)]
firmware: coreboot: Check size of table entry and use flex-array
[ Upstream commit
3b293487b8752cc42c1cbf8a0447bc6076c075fa ]
The memcpy() of the data following a coreboot_table_entry couldn't
be evaluated by the compiler under CONFIG_FORTIFY_SOURCE. To make it
easier to reason about, add an explicit flexible array member to struct
coreboot_device so the entire entry can be copied at once. Additionally,
validate the sizes before copying. Avoids this run-time false positive
warning:
memcpy: detected field-spanning write (size 168) of single field "&device->entry" at drivers/firmware/google/coreboot_table.c:103 (size 8)
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://lore.kernel.org/all/03ae2704-8c30-f9f0-215b-7cdf4ad35a9a@molgen.mpg.de/
Cc: Jack Rosenthal <jrosenth@chromium.org>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Julius Werner <jwerner@chromium.org>
Cc: Brian Norris <briannorris@chromium.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230107031406.gonna.761-kees@kernel.org
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Link: https://lore.kernel.org/r/20230112230312.give.446-kees@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Peter Foley [Fri, 13 Jan 2023 04:37:06 +0000 (23:37 -0500)]
ata: pata_cs5535: Don't build on UML
[ Upstream commit
22eebaa631c40f3dac169ba781e0de471b83bf45 ]
This driver uses MSR functions that aren't implemented under UML.
Avoid building it to prevent tripping up allyesconfig.
e.g.
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3a3): undefined reference to `__tracepoint_read_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x3d2): undefined reference to `__tracepoint_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x457): undefined reference to `__tracepoint_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x481): undefined reference to `do_trace_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4d5): undefined reference to `do_trace_write_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x4f5): undefined reference to `do_trace_read_msr'
/usr/lib/gcc/x86_64-pc-linux-gnu/12/../../../../x86_64-pc-linux-gnu/bin/ld: pata_cs5535.c:(.text+0x51c): undefined reference to `do_trace_write_msr'
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mateusz Guzik [Fri, 13 Jan 2023 18:44:47 +0000 (19:44 +0100)]
lockref: stop doing cpu_relax in the cmpxchg loop
[ Upstream commit
f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
open3 ("Same file open/close"):
proc stock no-pause
1 805603 814942 (+%1)
2 1054980 1054781 (-0%)
8 1544802 1822858 (+18%)
24 1191064 2199665 (+84%)
48 851582 1469860 (+72%)
96 609481 1427170 (+134%)
fstat2 ("Same file fstat"):
proc stock no-pause
1 3013872 3047636 (+1%)
2 4284687 4400421 (+2%)
8 3257721 5530156 (+69%)
24 2239819 5466127 (+144%)
48 1701072 5256609 (+209%)
96 1269157 6649326 (+423%)
Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):
proc stock patched patched
+nopause
24 2378041 2005501 5370335 (-15% / +125%)
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit
d472d9d98b46 ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <tony.luck@intel.com> # ia64
Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Henning Schild [Thu, 22 Dec 2022 10:37:20 +0000 (11:37 +0100)]
platform/x86: simatic-ipc: add another model
[ Upstream commit
d348b1d761e358a4ba03fb34aa7e3dbd278db236 ]
Add IPC PX-39A support.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-3-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Henning Schild [Thu, 22 Dec 2022 10:37:19 +0000 (11:37 +0100)]
platform/x86: simatic-ipc: correct name of a model
[ Upstream commit
ed058eab22d64c00663563e8e1e112989c65c59f ]
What we called IPC427G should be renamed to BX-39A to be more in line
with the actual product name.
Signed-off-by: Henning Schild <henning.schild@siemens.com>
Link: https://lore.kernel.org/r/20221222103720.8546-2-henning.schild@siemens.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Weißschuh [Wed, 21 Dec 2022 17:59:50 +0000 (17:59 +0000)]
platform/x86: asus-wmi: Ignore fan on E410MA
[ Upstream commit
82cc5c6c624c63f7b57214e325e2ea685d924e89 ]
The ASUS VivoBook has a fan device described in its ACPI tables but does
not actually contain any physical fan.
Use the quirk to inhibit fan handling.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-2-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Weißschuh [Wed, 21 Dec 2022 17:59:49 +0000 (17:59 +0000)]
platform/x86: asus-wmi: Add quirk wmi_ignore_fan
[ Upstream commit
c874b6de4cdfa2822a07b479887cd5f87fb5d078 ]
Some laptops have a fan device listed in their ACPI tables but do not
actually contain a fan.
Introduce a quirk that can be used to override the fan detection logic.
This was observed with a ASUS VivoBook E410MA running firmware
E410MAB.304.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221221-asus-fan-v1-1-e07f3949725b@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Thu, 12 Jan 2023 18:18:41 +0000 (19:18 +0100)]
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
[ Upstream commit
db9494895b405bf318dc7e563dee6daa51b3b6ed ]
The 0x33 keycode is emitted by Fn + F6 on a ASUS FX705GE laptop.
Reported-by: Nemcev Aleksey <Nemcev_Aleksey@inbox.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230112181841.84652-1-hdegoede@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Thomas Weißschuh [Wed, 21 Dec 2022 03:49:59 +0000 (03:49 +0000)]
platform/x86: asus-nb-wmi: Add alternate mapping for KEY_CAMERA
[ Upstream commit
c78a4e191839edc1e8c3e51565cf2e71d40e8883 ]
This keycode is emitted on a Asus VivoBook E410MAB with firmware
E410MAB.304.
The physical key has a strikken-through camera printed on it.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20221216-asus-key-v1-1-45da124119a3@weissschuh.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Klein [Tue, 20 Dec 2022 12:11:03 +0000 (13:11 +0100)]
platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
[ Upstream commit
36c2b9d6710427f802494ba070621cb415198293 ]
Add touchscreen info for the CSL Panther Tab HD.
Signed-off-by: Michael Klein <m.klein@mvz-labor-lb.de>
Link: https://lore.kernel.org/r/20221220121103.uiwn5l7fii2iggct@LLGMVZLB-0037
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andre Przywara [Wed, 11 Jan 2023 13:32:28 +0000 (13:32 +0000)]
r8152: add vendor/device ID pair for Microsoft Devkit
[ Upstream commit
be53771c87f4e322a9835d3faa9cd73a4ecdec5b ]
The Microsoft Devkit 2023 is a an ARM64 based machine featuring a
Realtek 8153 USB3.0-to-GBit Ethernet adapter. As in their other
machines, Microsoft uses a custom USB device ID.
Add the respective ID values to the driver. This makes Ethernet work on
the MS Devkit device. The chip has been visually confirmed to be a
RTL8153.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20230111133228.190801-1-andre.przywara@arm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Yihang Li [Wed, 4 Jan 2023 04:03:20 +0000 (12:03 +0800)]
scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id
[ Upstream commit
f58c89700630da6554b24fd3df293a24874c10c1 ]
Currently the driver sets the port invalid if one phy in the port is not
enabled, which may cause issues in expander situation. In directly attached
situation, if phy up doesn't occur in time when refreshing port id, the
port is incorrectly set to invalid which will also cause disk lost.
Therefore set a port invalid only if there are no devices attached to the
port.
Signed-off-by: Yihang Li <liyihang9@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1672805000-141102-3-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Xingui Yang [Wed, 4 Jan 2023 04:03:19 +0000 (12:03 +0800)]
scsi: hisi_sas: Use abort task set to reset SAS disks when discovered
[ Upstream commit
037b48057e8b485a8d72f808122796aeadbbee32 ]
Currently clear task set is used to abort all commands remaining in the
disk when the SAS disk is discovered, and if the disk is discovered by two
initiators, other I_T nexuses are also affected. So use abort task set
instead and take effect only on the specified I_T nexus.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Link: https://lore.kernel.org/r/1672805000-141102-2-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Heiko Carstens [Mon, 9 Jan 2023 14:54:56 +0000 (15:54 +0100)]
KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
[ Upstream commit
42400d99e9f0728c17240edb9645637ead40f6b9 ]
Use READ_ONCE() before cmpxchg() to prevent that the compiler generates
code that fetches the to be compared old value several times from memory.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20230109145456.2895385-1-hca@linux.ibm.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Bartosz Golaszewski [Fri, 6 Jan 2023 10:07:19 +0000 (11:07 +0100)]
spi: spidev: remove debug messages that access spidev->spi without locking
[ Upstream commit
6b35b173dbc1711f8d272e3f322d2ad697015919 ]
The two debug messages in spidev_open() dereference spidev->spi without
taking the lock and without checking if it's not null. This can lead to
a crash. Drop the messages as they're not needed - the user-space will
get informed about ENOMEM with the syscall return value.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20230106100719.196243-2-brgl@bgdev.pl
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Paulo Alcantara [Tue, 10 Jan 2023 23:35:46 +0000 (20:35 -0300)]
cifs: fix potential memory leaks in session setup
[ Upstream commit
2fe58d977ee05da5bb89ef5dc4f5bf2dc15db46f ]
Make sure to free cifs_ses::auth_key.response before allocating it as
we might end up leaking memory in reconnect or mounting.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Huang [Thu, 5 Jan 2023 19:01:18 +0000 (14:01 -0500)]
drm/amdkfd: Fix NULL pointer error for GC 11.0.1 on mGPU
[ Upstream commit
a6941f89d7c6a6ba49316bbd7da2fb2f719119a7 ]
The point bo->kfd_bo is NULL for queue's write pointer BO
when creating queue on mGPU. To avoid using the pointer
fixes the error.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Huang [Mon, 9 Jan 2023 19:16:42 +0000 (14:16 -0500)]
drm/amdkfd: Add sync after creating vram bo
[ Upstream commit
ba029e9991d9be90a28b6a0ceb25e9a6fb348829 ]
There will be data corruption on vram allocated by svm
if the initialization is not complete and application is
writting on the memory. Adding sync to wait for the
initialization completion is to resolve this issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tamim Khan [Fri, 30 Dec 2022 05:58:39 +0000 (00:58 -0500)]
ACPI: resource: Skip IRQ override on Asus Expertbook
B2402CBA
[ Upstream commit
77c7248882385397cd7dffe9e1437f59f32ce2de ]
Like the Asus Expertbook
B2502CBA and various Asus Vivobook laptops,
the Asus Expertbook
B2402CBA has an ACPI DSDT table that describes IRQ 1
as ActiveLow while the kernel overrides it to Edge_High. This prevents the
keyboard from working. To fix this issue, add this laptop to the
skip_override_table so that the kernel does not override IRQ 1.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216864
Tested-by: zelenat <zelenat@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Fri, 6 Jan 2023 23:15:07 +0000 (23:15 +0000)]
ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets
[ Upstream commit
242fc66ae6e1e2b8519daacc7590a73cd0e8a6e4 ]
The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Brown [Fri, 6 Jan 2023 23:15:06 +0000 (23:15 +0000)]
ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC
[ Upstream commit
8c6a42b5b0ed6f96624f56954e93eeae107440a6 ]
The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Miles Chen [Tue, 10 Jan 2023 03:12:52 +0000 (11:12 +0800)]
cpufreq: armada-37xx: stop using 0 as NULL pointer
[ Upstream commit
08f0adb193c008de640fde34a2e00a666c01d77c ]
Use NULL for NULL pointer to fix the following sparse warning:
drivers/cpufreq/armada-37xx-cpufreq.c:448:32: sparse: warning: Using plain integer as NULL pointer
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 9 Jan 2023 07:54:41 +0000 (08:54 +0100)]
tools/nolibc: prevent gcc from making memset() loop over itself
[ Upstream commit
1bfbe1f3e96720daf185f03d101f072d69753f88 ]
When building on ARM in thumb mode with gcc-11.3 at -O2 or -O3,
nolibc-test segfaults during the select() tests. It turns out that at
this level, gcc recognizes an opportunity for using memset() to zero
the fd_set, but it miscompiles it because it also recognizes a memset
pattern as well, and decides to call memset() from the memset() code:
000122bc <memset>:
122bc: b510 push {r4, lr}
122be: 0004 movs r4, r0
122c0: 2a00 cmp r2, #0
122c2: d003 beq.n 122cc <memset+0x10>
122c4: 23ff movs r3, #255 ; 0xff
122c6: 4019 ands r1, r3
122c8: f7ff fff8 bl 122bc <memset>
122cc: 0020 movs r0, r4
122ce: bd10 pop {r4, pc}
Simply placing an empty asm() statement inside the loop suffices to
avoid this.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Willy Tarreau [Mon, 9 Jan 2023 07:54:40 +0000 (08:54 +0100)]
tools/nolibc: fix missing includes causing build issues at -O0
[ Upstream commit
55abdd1f5e1e07418bf4a46c233a92f83cb5ae97 ]
After the nolibc includes were split to facilitate portability from
standard libcs, programs that include only what they need may miss
some symbols which are needed by libgcc. This is the case for raise()
which is needed by the divide by zero code in some architectures for
example.
Regardless, being able to include only the apparently needed files is
convenient.
Instead of trying to move all exported definitions to a single file,
since this can change over time, this patch takes another approach
consisting in including the nolibc header at the end of all standard
include files. This way their types and functions are already known
at the moment of inclusion, and including any single one of them is
sufficient to bring all the required ones.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Warner Losh [Mon, 9 Jan 2023 07:54:38 +0000 (08:54 +0100)]
tools/nolibc: Fix S_ISxxx macros
[ Upstream commit
16f5cea74179b5795af7ce359971f5128d10f80e ]
The mode field has the type encoded as an value in a field, not as a bit
mask. Mask the mode with S_IFMT instead of each type to test. Otherwise,
false positives are possible: eg S_ISDIR will return true for block
devices because S_IFDIR = 0040000 and S_IFBLK = 0060000 since mode is
masked with S_IFDIR instead of S_IFMT. These macros now match the
similar definitions in tools/include/uapi/linux/stat.h.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sven Schnelle [Mon, 9 Jan 2023 07:54:37 +0000 (08:54 +0100)]
nolibc: fix fd_set type
[ Upstream commit
feaf75658783a919410f8c2039dbc24b6a29603d ]
The kernel uses unsigned long for the fd_set bitmap,
but nolibc use u32. This works fine on little endian
machines, but fails on big endian. Convert to unsigned
long to fix this.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Fri, 6 Jan 2023 16:04:49 +0000 (08:04 -0800)]
perf/x86/intel/uncore: Add Emerald Rapids
[ Upstream commit
5268a2842066c227e6ccd94bac562f1e1000244f ]
From the perspective of the uncore PMU, the new Emerald Rapids is the
same as the Sapphire Rapids. The only difference is the event list,
which will be supported in the perf tool later.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-4-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Fri, 6 Jan 2023 16:04:48 +0000 (08:04 -0800)]
perf/x86/msr: Add Emerald Rapids
[ Upstream commit
69ced4160969025821f2999ff92163ed26568f1c ]
The same as Sapphire Rapids, the SMI_COUNT MSR is also supported on
Emerald Rapids. Add Emerald Rapids model.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230106160449.3566477-3-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Wed, 4 Jan 2023 20:13:47 +0000 (12:13 -0800)]
perf/x86/msr: Add Meteor Lake support
[ Upstream commit
6887a4d3aede084bf08b70fbc9736c69fce05d7f ]
Meteor Lake is Intel's successor to Raptor lake. PPERF and SMI_COUNT MSRs
are also supported.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230104201349.1451191-7-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kan Liang [Wed, 4 Jan 2023 20:13:46 +0000 (12:13 -0800)]
perf/x86/cstate: Add Meteor Lake support
[ Upstream commit
01f2ea5bcf89dbd7a6530dbce7f2fb4e327e7006 ]
Meteor Lake is Intel's successor to Raptor lake. From the perspective of
Intel cstate residency counters, there is nothing changed compared with
Raptor lake.
Share adl_cstates with Raptor lake.
Update the comments for Meteor Lake.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Link: https://lore.kernel.org/r/20230104201349.1451191-6-kan.liang@linux.intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Oleksii Moisieiev [Tue, 20 Dec 2022 14:50:13 +0000 (14:50 +0000)]
xen/pvcalls: free active map buffer on pvcalls_front_free_map
[ Upstream commit
f57034cedeb6e00256313a2a6ee67f974d709b0b ]
Data buffer for active map is allocated in alloc_active_ring and freed
in free_active_ring function, which is used only for the error
cleanup. pvcalls_front_release is calling pvcalls_front_free_map which
ends foreign access for this buffer, but doesn't free allocated pages.
Call free_active_ring to clean all allocated resources.
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/6a762ee32dd655cbb09a4aa0e2307e8919761311.1671531297.git.oleksii_moisieiev@epam.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alexander Gordeev [Wed, 7 Dec 2022 16:15:19 +0000 (17:15 +0100)]
s390: expicitly align _edata and _end symbols on page boundary
[ Upstream commit
45d619bdaf799196d702a9ae464b07066d6db2f9 ]
Symbols _edata and _end in the linker script are the
only unaligned expicitly on page boundary. Although
_end is aligned implicitly by BSS_SECTION macro that
is still inconsistent and could lead to a bug if a tool
or function would assume that _edata is as aligned as
others.
For example, vmem_map_init() function does not align
symbols _etext, _einittext etc. Should these symbols
be unaligned as well, the size of ranges to update
were short on one page.
Instead of fixing every occurrence of this kind in the
code and external tools just force the alignment on
these two symbols.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Niklas Schnelle [Tue, 3 Jan 2023 14:11:07 +0000 (15:11 +0100)]
s390/debug: add _ASM_S390_ prefix to header guard
[ Upstream commit
0d4d52361b6c29bf771acd4fa461f06d78fb2fac ]
Using DEBUG_H without a prefix is very generic and inconsistent with
other header guards in arch/s390/include/asm. In fact it collides with
the same name in the ath9k wireless driver though that depends on !S390
via disabled wireless support. Let's just use a consistent header guard
name and prevent possible future trouble.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Patrick Thompson [Tue, 20 Dec 2022 20:58:26 +0000 (15:58 -0500)]
drm: Add orientation quirk for Lenovo ideapad D330-10IGL
[ Upstream commit
0688773f0710528e1ab302c3d6317e269f2e2e6e ]
Panel is 800x1280 but mounted on a detachable form factor sideways.
Signed-off-by: Patrick Thompson <ptf@google.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20221220205826.178008-1-ptf@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hui Wang [Thu, 5 Jan 2023 03:42:49 +0000 (11:42 +0800)]
net: usb: cdc_ether: add support for Thales Cinterion PLS62-W modem
[ Upstream commit
eea8ce81fbb544e3caad1a1c876ba1af467b3d3c ]
This modem has 7 interfaces, 5 of them are serial interfaces and are
driven by cdc_acm, while 2 of them are wwan interfaces and are driven
by cdc_ether:
If 0: Abstract (modem)
If 1: Abstract (modem)
If 2: Abstract (modem)
If 3: Abstract (modem)
If 4: Abstract (modem)
If 5: Ethernet Networking
If 6: Ethernet Networking
Without this change, the 2 network interfaces will be named to usb0
and usb1, our QA think the names are confusing and filed a bug on it.
After applying this change, the name will be wwan0 and wwan1, and
they could work well with modem manager.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20230105034249.10433-1-hui.wang@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Akhil P Oommen [Fri, 16 Dec 2022 17:03:14 +0000 (22:33 +0530)]
drm/msm/a6xx: Avoid gx gbit halt during rpm suspend
[ Upstream commit
f4a75b5933c998e60fd812a7680e0971eb1c7cee ]
As per the downstream driver, gx gbif halt is required only during
recovery sequence. So lets avoid it during regular rpm suspend.
Signed-off-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/515279/
Link: https://lore.kernel.org/r/20221216223253.1.Ice9c47bfeb1fddb8dc377a3491a043a3ee7fca7d@changeid
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chancel Liu [Wed, 4 Jan 2023 02:57:54 +0000 (10:57 +0800)]
ASoC: fsl_micfil: Correct the number of steps on SX controls
[ Upstream commit
cdfa92eb90f5770b26a79824ef213ebdbbd988b1 ]
The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104025754.3019235-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Konrad Dybcio [Tue, 3 Jan 2023 17:11:29 +0000 (18:11 +0100)]
cpufreq: Add SM6375 to cpufreq-dt-platdev blocklist
[ Upstream commit
faf28e240dd118d9521c68aeb9388b9b8f02d9d0 ]
The Qualcomm SM6375 platform uses the qcom-cpufreq-hw driver, so add
it to the cpufreq-dt-platdev driver's blocklist.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Max Filippov [Fri, 23 Dec 2022 07:28:21 +0000 (23:28 -0800)]
kcsan: test: don't put the expect array on the stack
[ Upstream commit
5b24ac2dfd3eb3e36f794af3aa7f2828b19035bd ]
Size of the 'expect' array in the __report_matches is 1536 bytes, which
is exactly the default frame size warning limit of the xtensa
architecture.
As a result allmodconfig xtensa kernel builds with the gcc that does not
support the compiler plugins (which otherwise would push the said
warning limit to 2K) fail with the following message:
kernel/kcsan/kcsan_test.c:257:1: error: the frame size of 1680 bytes
is larger than 1536 bytes
Fix it by dynamically allocating the 'expect' array.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Marco Elver <elver@google.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mars Chen [Wed, 28 Dec 2022 10:38:12 +0000 (18:38 +0800)]
ASoC: support machine driver with max98360
[ Upstream commit
810948f45d99c46b60852ef2a5a2777c12d6bb3e ]
Signed-off-by: Mars Chen <chenxiangrui@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20221228103812.450956-1-chenxiangrui@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Aniol Martí [Tue, 27 Dec 2022 22:49:32 +0000 (23:49 +0100)]
ASoC: amd: yc: Add ASUS M5402RA into DMI table
[ Upstream commit
a0dd7fcab5cd221fa960f594c586e1f9f16c02c0 ]
ASUS VivoBook 13 OLED (M5402RA) needs this quirk to get the built-in microphone working properly.
Signed-off-by: Aniol Martí <aniol@aniolmarti.cat>
Link: https://lore.kernel.org/r/20221227224932.9771-1-aniol@aniolmarti.cat
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Allen-KH Cheng [Wed, 28 Dec 2022 11:57:56 +0000 (19:57 +0800)]
ASoC: mediatek: mt8186: Add machine support for max98357a
[ Upstream commit
8a54f666db581bbf07494cca44a0124acbced581 ]
Add support for mt8186 with mt6366 and max98357a.
Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com>
Link: https://lore.kernel.org/r/20221228115756.28014-1-allen-kh.cheng@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
tongjian [Wed, 28 Dec 2022 12:22:29 +0000 (20:22 +0800)]
ASoC: mediatek: mt8186: support rt5682s_max98360
[ Upstream commit
6e1dbf694d7cd1737ee14866e9e05016ccc9ac40 ]
Add support for using the rt5682s codec together with max98360a on
MT8186-MT6366-RT1019-RT5682S machines.
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Link: https://lore.kernel.org/r/20221228122230.3818533-2-tongjian@huaqin.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sumit Gupta [Tue, 20 Dec 2022 16:02:37 +0000 (21:32 +0530)]
cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
[ Upstream commit
01c5bb0cc2a39fbc56ff9a5ef28b79447f0c2351 ]
Tegra234 platform uses the tegra194-cpufreq driver, so add it
to the blocklist in cpufreq-dt-platdev driver to avoid the cpufreq
driver registration from there.
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pierre Gondois [Tue, 20 Dec 2022 10:12:25 +0000 (11:12 +0100)]
cpufreq: CPPC: Add u64 casts to avoid overflowing
[ Upstream commit
f5f94b9c8b805d87ff185caf9779c3a4d07819e3 ]
The fields of the _CPC object are unsigned 32-bits values.
To avoid overflows while using _CPC's values, add 'u64' casts.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Witold Sadowski [Mon, 19 Dec 2022 14:42:48 +0000 (06:42 -0800)]
spi: cadence: Fix busy cycles calculation
[ Upstream commit
e8bb8f19e73a1e855e54788f8673b9b49e46b5cd ]
If xSPI is in x2/x4/x8 mode to calculate busy
cycles, busy bits count must be divided by the number
of lanes.
If opcommand is using 8 busy bits, but SPI is
in x4 mode, there will be only 2 busy cycles.
Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
Reviewed-by: Chandrakala Chavva <cchavva@marvell.com>
Reviewed-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Link: https://lore.kernel.org/r/20221219144254.20883-2-wsadowski@marvell.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wim Van Boven [Fri, 16 Dec 2022 08:18:27 +0000 (09:18 +0100)]
ASoC: amd: yc: Add Razer Blade 14 2022 into DMI table
[ Upstream commit
68506a173dd700c2bd794dcc3489edcdb8ee35c6 ]
Razer Blade 14 (2022) - RZ09-0427 needs the quirk to enable the built in microphone
Signed-off-by: Wim Van Boven <wimvanboven@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221216081828.12382-1-wimvanboven@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Curtis Malainey [Tue, 20 Dec 2022 12:56:29 +0000 (14:56 +0200)]
ASoC: SOF: Add FW state to debugfs
[ Upstream commit
9a9134fd56f6ba614ff7b2b3b0bac0bf1d0dc0c9 ]
Allow system health detection mechanisms to check the FW state, this
will allow them to check if the FW is in its "crashed" state going
forward to help automatically diagnose driver state.
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-4-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Tue, 20 Dec 2022 12:56:28 +0000 (14:56 +0200)]
ASoC: SOF: pm: Always tear down pipelines before DSP suspend
[ Upstream commit
d185e0689abc98ef55fb7a7d75aa0c48a0ed5838 ]
When the DSP is suspended while the firmware is in the crashed state, we
skip tearing down the pipelines. This means that the widget reference
counts will not get to reset to 0 before suspend. This will lead to
errors with resuming audio after system resume. To fix this, invoke the
tear_down_all_pipelines op before skipping to DSP suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Ranjani Sridharan [Tue, 20 Dec 2022 12:56:27 +0000 (14:56 +0200)]
ASoC: SOF: pm: Set target state earlier
[ Upstream commit
6f95eec6fb89e195dbdf30de65553c7fc57d9372 ]
If the DSP crashes before the system suspends, the setting of target state
will be skipped because the firmware state will no longer be
SOF_FW_BOOT_COMPLETE. This leads to the incorrect assumption that the
DSP should suspend to D0I3 instead of suspending to D3. To fix this,
set the target_state before we skip to DSP suspend even when the DSP has
crashed.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Curtis Malainey <cujomalainey@chromium.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20221220125629.8469-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenchao Hao [Sat, 26 Nov 2022 01:07:52 +0000 (09:07 +0800)]
scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
[ Upstream commit
a3be19b91ea7121d388084e8c07f5b1b982eb40c ]
It was observed that the kernel would potentially send
ISCSI_KEVENT_UNBIND_SESSION multiple times. Introduce 'target_state' in
iscsi_cls_session() to make sure session will send only one unbind session
event.
This introduces a regression wrt. the issue fixed in commit
13e60d3ba287
("scsi: iscsi: Report unbind session event when the target has been
removed"). If iscsid dies for any reason after sending an unbind session to
kernel, once iscsid is restarted, the kernel's ISCSI_KEVENT_UNBIND_SESSION
event is lost and userspace is then unable to logout. However, the session
is actually in invalid state (its target_id is INVALID) so iscsid should
not sync this session during restart.
Consequently we need to check the session's target state during iscsid
restart. If session is in unbound state, do not sync this session and
perform session teardown. This is OK because once a session is unbound, we
can not recover it any more (mainly because its target id is INVALID).
Signed-off-by: Wenchao Hao <haowenchao@huawei.com>
Link: https://lore.kernel.org/r/20221126010752.231917-1-haowenchao@huawei.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Reviewed-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
David Morley [Thu, 19 Jan 2023 19:00:28 +0000 (19:00 +0000)]
tcp: fix rate_app_limited to default to 1
[ Upstream commit
300b655db1b5152d6101bcb6801d50899b20c2d6 ]
The initial default value of 0 for tp->rate_app_limited was incorrect,
since a flow is indeed application-limited until it first sends
data. Fixing the default to be 1 is generally correct but also
specifically will help user-space applications avoid using the initial
tcpi_delivery_rate value of 0 that persists until the connection has
some non-zero bandwidth sample.
Fixes:
eb8329e0a04d ("tcp: export data delivery rate")
Suggested-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: David Morley <morleyd@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Tested-by: David Morley <morleyd@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Kees Cook [Wed, 18 Jan 2023 20:35:01 +0000 (12:35 -0800)]
bnxt: Do not read past the end of test names
[ Upstream commit
d3e599c090fc6977331150c5f0a69ab8ce87da21 ]
Test names were being concatenated based on a offset beyond the end of
the first name, which tripped the buffer overflow detection logic:
detected buffer overflow in strnlen
[...]
Call Trace:
bnxt_ethtool_init.cold+0x18/0x18
Refactor struct hwrm_selftest_qlist_output to use an actual array,
and adjust the concatenation to use snprintf() rather than a series of
strncat() calls.
Reported-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Link: https://lore.kernel.org/lkml/Y8F%2F1w1AZTvLglFX@x1-carbon/
Tested-by: Niklas Cassel <Niklas.Cassel@wdc.com>
Fixes:
eb51365846bc ("bnxt_en: Add basic ethtool -t selftest support.")
Cc: Michael Chan <michael.chan@broadcom.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrew Halaney [Wed, 18 Jan 2023 16:56:38 +0000 (10:56 -0600)]
net: stmmac: enable all safety features by default
[ Upstream commit
fdfc76a116b5e9d3e98e6c96fe83b42d011d21d4 ]
In the original implementation of dwmac5
commit
8bf993a5877e ("net: stmmac: Add support for DWMAC5 and implement Safety Features")
all safety features were enabled by default.
Later it seems some implementations didn't have support for all the
features, so in
commit
5ac712dcdfef ("net: stmmac: enable platform specific safety features")
the safety_feat_cfg structure was added to the callback and defined for
some platforms to selectively enable these safety features.
The problem is that only certain platforms were given that software
support. If the automotive safety package bit is set in the hardware
features register the safety feature callback is called for the platform,
and for platforms that didn't get a safety_feat_cfg defined this results
in the following NULL pointer dereference:
[ 7.933303] Call trace:
[ 7.935812] dwmac5_safety_feat_config+0x20/0x170 [stmmac]
[ 7.941455] __stmmac_open+0x16c/0x474 [stmmac]
[ 7.946117] stmmac_open+0x38/0x70 [stmmac]
[ 7.950414] __dev_open+0x100/0x1dc
[ 7.954006] __dev_change_flags+0x18c/0x204
[ 7.958297] dev_change_flags+0x24/0x6c
[ 7.962237] do_setlink+0x2b8/0xfa4
[ 7.965827] __rtnl_newlink+0x4ec/0x840
[ 7.969766] rtnl_newlink+0x50/0x80
[ 7.973353] rtnetlink_rcv_msg+0x12c/0x374
[ 7.977557] netlink_rcv_skb+0x5c/0x130
[ 7.981500] rtnetlink_rcv+0x18/0x2c
[ 7.985172] netlink_unicast+0x2e8/0x340
[ 7.989197] netlink_sendmsg+0x1a8/0x420
[ 7.993222] ____sys_sendmsg+0x218/0x280
[ 7.997249] ___sys_sendmsg+0xac/0x100
[ 8.001103] __sys_sendmsg+0x84/0xe0
[ 8.004776] __arm64_sys_sendmsg+0x24/0x30
[ 8.008983] invoke_syscall+0x48/0x114
[ 8.012840] el0_svc_common.constprop.0+0xcc/0xec
[ 8.017665] do_el0_svc+0x38/0xb0
[ 8.021071] el0_svc+0x2c/0x84
[ 8.024212] el0t_64_sync_handler+0xf4/0x120
[ 8.028598] el0t_64_sync+0x190/0x194
Go back to the original behavior, if the automotive safety package
is found to be supported in hardware enable all the features unless
safety_feat_cfg is passed in saying this particular platform only
supports a subset of the features.
Fixes:
5ac712dcdfef ("net: stmmac: enable platform specific safety features")
Reported-by: Ning Cai <ncai@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Wed, 18 Jan 2023 08:38:24 +0000 (14:08 +0530)]
thermal: core: call put_device() only after device_register() fails
[ Upstream commit
6c54b7bc8a31ce0f7cc7f8deef05067df414f1d8 ]
put_device() shouldn't be called before a prior call to
device_register(). __thermal_cooling_device_register() doesn't follow
that properly and needs fixing. Also
thermal_cooling_device_destroy_sysfs() is getting called unnecessarily
on few error paths.
Fix all this by placing the calls at the right place.
Based on initial work done by Caleb Connolly.
Fixes:
4748f9687caa ("thermal: core: fix some possible name leaks in error paths")
Fixes:
c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Reported-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Frank Rowand <frowand.list@gmail.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dan Carpenter [Fri, 28 Oct 2022 15:02:34 +0000 (18:02 +0300)]
thermal/core: fix error code in __thermal_cooling_device_register()
[ Upstream commit
e49a1e1ee078aee21006192076a8d93335e0daa9 ]
Return an error pointer if ->get_max_state() fails. The current code
returns NULL which will cause an oops in the callers.
Fixes:
c408b3d1d9bb ("thermal: Validate new state in cur_state_store()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of:
6c54b7bc8a31 ("thermal: core: call put_device() only after device_register() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Viresh Kumar [Mon, 17 Oct 2022 10:03:01 +0000 (15:33 +0530)]
thermal: Validate new state in cur_state_store()
[ Upstream commit
c408b3d1d9bbc7de5fb0304fea424ef2539da616 ]
In cur_state_store(), the new state of the cooling device is received
from user-space and is not validated by the thermal core but the same is
left for the individual drivers to take care of. Apart from duplicating
the code it leaves possibility for introducing bugs where a driver may
not do it right.
Lets make the thermal core check the new state itself and store the max
value in the cooling device structure.
Link: https://lore.kernel.org/all/Y0ltRJRjO7AkawvE@kili/
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of:
6c54b7bc8a31 ("thermal: core: call put_device() only after device_register() fails")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Rakesh Sankaranarayanan [Wed, 18 Jan 2023 17:47:35 +0000 (23:17 +0530)]
net: dsa: microchip: ksz9477: port map correction in ALU table entry register
[ Upstream commit
6c977c5c2e4c5d8ad1b604724cc344e38f96fe9b ]
ALU table entry 2 register in KSZ9477 have bit positions reserved for
forwarding port map. This field is referred in ksz9477_fdb_del() for
clearing forward port map and alu table.
But current fdb_del refer ALU table entry 3 register for accessing forward
port map. Update ksz9477_fdb_del() to get forward port map from correct
alu table entry register.
With this bug, issue can be observed while deleting static MAC entries.
Delete any specific MAC entry using "bridge fdb del" command. This should
clear all the specified MAC entries. But it is observed that entries with
self static alone are retained.
Tested on LAN9370 EVB since ksz9477_fdb_del() is used common across
LAN937x and KSZ series.
Fixes:
b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Rakesh Sankaranarayanan <rakesh.sankaranarayanan@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://lore.kernel.org/r/20230118174735.702377-1-rakesh.sankaranarayanan@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-starfive.git / log