review.tizen.org Git - platform/kernel/linux-starfive.git/log

Merge tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Usual rc3 pickup, lots of little fixes all over.

  The core VT registration regression fix is probably the largest,
  otherwise ttm, amdgpu and tegra are the bulk, with some minor driver
  fixes.

  No i915 pull this week which may or may not mean I get 2x of it next
  week, we'll see how it goes.

  core:
   - fix VT registration regression

  ttm:
   - fix two fence leaks

  amdgpu:
   - Fix missed mutex unlock in DC error path
   - Fix firmware leak for sdma5
   - DC bpc property fixes

  amdkfd:
   - Fix memleak in an error path

  radeon:
   - Fix copy paste typo in NI DPM spll validation

  rcar-du:
   - build fix

  tegra:
   - add missing zpos property
   - child driver registeration fix
   - debugfs cleanup fix
   - doc fix

  mcde:
   - reorder fbdev setup

  panel:
   - fix connector type
   - fix orienation for some panels

  sun4i:
   - fix dma/iommu configuration

  uvesafb:
   - respect blank flag"

* tag 'drm-fixes-2020-06-26' of git://anongit.freedesktop.org/drm/drm: (25 commits)
  drm/amd: fix potential memleak in err branch
  drm/amd/display: Fix ineffective setting of max bpc property
  drm/amd/display: Enable output_bpc property on all outputs
  drm/amdgpu: add fw release for sdma v5_0
  drm/fb-helper: Fix vt restore
  drm/radeon: fix fb_div check in ni_init_smc_spll_table()
  drm/amdgpu/display: Unlock mutex on error
  drm/sun4i: mixer: Call of_dma_configure if there's an IOMMU
  drm: panel-orientation-quirks: Use generic orientation-data for Acer S1003
  drm: panel-orientation-quirks: Add quirk for Asus T101HA panel
  video: fbdev: uvesafb: fix "noblank" option handling
  drm/panel-simple: fix connector type for newhaven_nhd_43_480272ef_atxl
  drm/panel-simple: fix connector type for LogicPD Type28 Display
  drm: rcar-du: Fix build error
  drm: mcde: Fix forgotten user of drm->dev_private
  drm: mcde: Fix display initialization problem
  drm/tegra: Add zpos property for cursor planes
  gpu: host1x: Detach driver on unregister
  gpu: host1x: Correct trivial kernel-doc inconsistencies
  drm/tegra: hub: Register child devices
  ...

Merge branch 'akpm' (patches from Andrew)

Merge misx fixes from Andrew Morton:
"31 patches.

  Subsystems affected by this patch series: hotfixes, mm/pagealloc,
  kexec, ocfs2, lib, mm/slab, mm/slab, mm/slub, mm/swap, mm/pagemap,
  mm/vmalloc, mm/memcg, mm/gup, mm/thp, mm/vmscan, x86,
  mm/memory-hotplug, MAINTAINERS"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
  MAINTAINERS: update info for sparse
  mm/memory_hotplug.c: fix false softlockup during pfn range removal
  mm: remove vmalloc_exec
  arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page
  x86/hyperv: allocate the hypercall page with only read and execute bits
  mm/memory: fix IO cost for anonymous page
  mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"
  mm: workingset: age nonresident information alongside anonymous pages
  doc: THP CoW fault no longer allocate THP
  docs: mm/gup: minor documentation update
  mm/memcontrol.c: prevent missed memory.low load tears
  mm/memcontrol.c: add missed css_put()
  mm: memcontrol: handle div0 crash race condition in memory.low
  mm/vmalloc.c: fix a warning while make xmldocs
  media: omap3isp: remove cacheflush.h
  make asm-generic/cacheflush.h more standalone
  mm/debug_vm_pgtable: fix build failure with powerpc 8xx
  mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()
  mm: fix swap cache node allocation mask
  slub: cure list_slab_objects() from double fix
  ...

MAINTAINERS: update info for sparse

Update the info for sparse. More specifically:

- change W entry to point to sparse.docs.kernel.org

- add Q & B entry (patchwork & bugzilla)

Link: http://lkml.kernel.org/r/20200621144204.53938-1-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory_hotplug.c: fix false softlockup during pfn range removal

When working with very large nodes, poisoning the struct pages (for which
there will be very many) can take a very long time.  If the system is
using voluntary preemptions, the software watchdog will not be able to
detect forward progress.  This patch addresses this issue by offering to
give up time like __remove_pages() does.  This behavior was introduced in
v5.6 with: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in
remove_pfn_range_from_zone()")

Alternately, init_page_poison could do this cond_resched(), but it seems
to me that the caller of init_page_poison() is what actually knows whether
or not it should relax its own priority.

Based on Dan's notes, I think this is perfectly safe: commit f931ab479dd2
("mm: fix devm_memremap_pages crash, use mem_hotplug_{begin, done}")

Aside from fixing the lockup, it is also a friendlier thing to do on lower
core systems that might wipe out large chunks of hotplug memory (probably
not a very common case).

Fixes this kind of splat:

  watchdog: BUG: soft lockup - CPU#46 stuck for 22s! [daxctl:9922]
  irq event stamp: 138450
  hardirqs last  enabled at (138449): [<ffffffffa1001f26>] trace_hardirqs_on_thunk+0x1a/0x1c
  hardirqs last disabled at (138450): [<ffffffffa1001f42>] trace_hardirqs_off_thunk+0x1a/0x1c
  softirqs last  enabled at (138448): [<ffffffffa1e00347>] __do_softirq+0x347/0x456
  softirqs last disabled at (138443): [<ffffffffa10c416d>] irq_exit+0x7d/0xb0
  CPU: 46 PID: 9922 Comm: daxctl Not tainted 5.7.0-BEN-14238-g373c6049b336 #30
  Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0578.D07.1902280810 02/28/2019
  RIP: 0010:memset_erms+0x9/0x10
  Code: c1 e9 03 40 0f b6 f6 48 b8 01 01 01 01 01 01 01 01 48 0f af c6 f3 48 ab 89 d1 f3 aa 4c 89 c8 c3 90 49 89 f9 40 88 f0 48 89 d1 <f3> aa 4c 89 c8 c3 90 49 89 fa 40 0f b6 ce 48 b8 01 01 01 01 01 01
  Call Trace:
   remove_pfn_range_from_zone+0x3a/0x380
   memunmap_pages+0x17f/0x280
   release_nodes+0x22a/0x260
   __device_release_driver+0x172/0x220
   device_driver_detach+0x3e/0xa0
   unbind_store+0x113/0x130
   kernfs_fop_write+0xdc/0x1c0
   vfs_write+0xde/0x1d0
   ksys_write+0x58/0xd0
   do_syscall_64+0x5a/0x120
   entry_SYSCALL_64_after_hwframe+0x49/0xb3
  Built 2 zonelists, mobility grouping on.  Total pages: 49050381
  Policy zone: Normal
  Built 3 zonelists, mobility grouping on.  Total pages: 49312525
  Policy zone: Normal

David said: "It really only is an issue for devmem.  Ordinary
hotplugged system memory is not affected (onlined/offlined in memory
block granularity)."

Link: http://lkml.kernel.org/r/20200619231213.1160351-1-ben.widawsky@intel.com
Fixes: commit d33695b16a9f ("mm/memory_hotplug: poison memmap in remove_pfn_range_from_zone()")
Signed-off-by: Ben Widawsky <ben.widawsky@intel.com>
Reported-by: "Scargall, Steve" <steve.scargall@intel.com>
Reported-by: Ben Widawsky <ben.widawsky@intel.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove vmalloc_exec

Merge vmalloc_exec into its only caller. Note that for !CONFIG_MMU
__vmalloc_node_range maps to __vmalloc, which directly clears the
__GFP_HIGHMEM added by the vmalloc_exec stub anyway.

Link: http://lkml.kernel.org/r/20200618064307.32739-4-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: use PAGE_KERNEL_ROX directly in alloc_insn_page

Use PAGE_KERNEL_ROX directly instead of allocating RWX and setting the
page read-only just after the allocation.

Link: http://lkml.kernel.org/r/20200618064307.32739-3-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/hyperv: allocate the hypercall page with only read and execute bits

Patch series "fix a hyperv W^X violation and remove vmalloc_exec"

Dexuan reported a W^X violation due to the fact that the hyper hypercall
page due switching it to be allocated using vmalloc_exec.

The problem is that PAGE_KERNEL_EXEC as used by vmalloc_exec actually
sets writable permissions in the pte.  This series fixes the issue by
switching to the low-level __vmalloc_node_range interface that allows
specifing more detailed permissions instead.  It then also open codes
the other two callers and removes the somewhat confusing vmalloc_exec
interface.

Peter noted that the hyper hypercall page allocation also has another
long standing issue in that it shouldn't use the full vmalloc but just
the module space.  This issue is so far theoretical as the allocation is
done early in the boot process.  I plan to fix it with another bigger
series for 5.9.

This patch (of 3):

Avoid a W^X violation cause by the fact that PAGE_KERNEL_EXEC includes
the writable bit.

For this resurrect the removed PAGE_KERNEL_RX definition, but as
PAGE_KERNEL_ROX to match arm64 and powerpc.

Link: http://lkml.kernel.org/r/20200618064307.32739-2-hch@lst.de
Fixes: 78bb17f76edc ("x86/hyperv: use vmalloc_exec for the hypercall page")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory: fix IO cost for anonymous page

With synchronous IO swap device, swap-in is directly handled in fault
code. Since IO cost notation isn't added there, with synchronous IO
swap device, LRU balancing could be wrongly biased. Fix it to count it
in fault code.

Link: http://lkml.kernel.org/r/1592288204-27734-4-git-send-email-iamjoonsoo.kim@lge.com
Fixes: 314b57fb0460001 ("mm: balance LRU lists based on relative thrashing cache sizing")
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/swap: fix for "mm: workingset: age nonresident information alongside anonymous pages"

Non-file-lru page could also be activated in mark_page_accessed() and we
need to count this activation for nonresident_age.

Note that it's better for this patch to be squashed into the patch "mm:
workingset: age nonresident information alongside anonymous pages".

Link: http://lkml.kernel.org/r/1592288204-27734-3-git-send-email-iamjoonsoo.kim@lge.com
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: workingset: age nonresident information alongside anonymous pages

Patch series "fix for "mm: balance LRU lists based on relative
thrashing" patchset"

This patchset fixes some problems of the patchset, "mm: balance LRU
lists based on relative thrashing", which is now merged on the mainline.

Patch "mm: workingset: let cache workingset challenge anon fix" is the
result of discussion with Johannes.  See following link.

  http://lkml.kernel.org/r/20200520232525.798933-6-hannes@cmpxchg.org

And, the other two are minor things which are found when I try to rebase
my patchset.

This patch (of 3):

After ("mm: workingset: let cache workingset challenge anon fix"), we
compare refault distances to active_file + anon.  But age of the
non-resident information is only driven by the file LRU.  As a result,
we may overestimate the recency of any incoming refaults and activate
them too eagerly, causing unnecessary LRU churn in certain situations.

Make anon aging drive nonresident age as well to address that.

Link: http://lkml.kernel.org/r/1592288204-27734-1-git-send-email-iamjoonsoo.kim@lge.com
Link: http://lkml.kernel.org/r/1592288204-27734-2-git-send-email-iamjoonsoo.kim@lge.com
Fixes: 34e58cac6d8f2a ("mm: workingset: let cache workingset challenge anon")
Reported-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc: THP CoW fault no longer allocate THP

Since commit 3917c80280c9 ("thp: change CoW semantics for anon-THP"),
THP CoW page fault is rewritten. Now it just splits pmd then fallback
to base page fault, it doesn't try to allocate THP anymore. So it is no
longer counted in THP_FAULT_ALLOC.

Remove the obsolete statement in documentation about THP CoW allocation
to avoid confusion.

Link: http://lkml.kernel.org/r/1592424895-5421-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs: mm/gup: minor documentation update

Now there are 5 cases. Updated the same.

Link: http://lkml.kernel.org/r/1592422023-7401-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Jan Kara <jack@suse.cz>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: prevent missed memory.low load tears

Looks like one of these got missed when massaging in f86b810c2610 ("mm,
memcg: prevent memory.low load/store tearing") with other linux-mm
changes.

Link: http://lkml.kernel.org/r/20200612174437.GA391453@chrisdown.name
Signed-off-by: Chris Down <chris@chrisdown.name>
Reported-by: Michal Koutny <mkoutny@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcontrol.c: add missed css_put()

We should put the css reference when memory allocation failed.

Link: http://lkml.kernel.org/r/20200614122653.98829-1-songmuchun@bytedance.com
Fixes: f0a3a24b532d ("mm: memcg/slab: rework non-root kmem_cache lifecycle management")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Acked-by: Roman Gushchin <guro@fb.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: handle div0 crash race condition in memory.low

Tejun reports seeing rare div0 crashes in memory.low stress testing:

  RIP: 0010:mem_cgroup_calculate_protection+0xed/0x150
  Code: 0f 46 d1 4c 39 d8 72 57 f6 05 16 d6 42 01 40 74 1f 4c 39 d8 76 1a 4c 39 d1 76 15 4c 29 d1 4c 29 d8 4d 29 d9 31 d2 48 0f af c1 <49> f7 f1 49 01 c2 4c 89 96 38 01 00 00 5d c3 48 0f af c7 31 d2 49
  RSP: 0018:ffffa14e01d6fcd0 EFLAGS: 00010246
  RAX: 000000000243e384 RBX: 0000000000000000 RCX: 0000000000008f4b
  RDX: 0000000000000000 RSI: ffff8b89bee84000 RDI: 0000000000000000
  RBP: ffffa14e01d6fcd0 R08: ffff8b89ca7d40f8 R09: 0000000000000000
  R10: 0000000000000000 R11: 00000000006422f7 R12: 0000000000000000
  R13: ffff8b89d9617000 R14: ffff8b89bee84000 R15: ffffa14e01d6fdb8
  FS:  0000000000000000(0000) GS:ffff8b8a1f1c0000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f93b1fc175b CR3: 000000016100a000 CR4: 0000000000340ea0
  Call Trace:
    shrink_node+0x1e5/0x6c0
    balance_pgdat+0x32d/0x5f0
    kswapd+0x1d7/0x3d0
    kthread+0x11c/0x160
    ret_from_fork+0x1f/0x30

This happens when parent_usage == siblings_protected.

We check that usage is bigger than protected, which should imply
parent_usage being bigger than siblings_protected.  However, we don't
read (or even update) these values atomically, and they can be out of
sync as the memory state changes under us.  A bit of fluctuation around
the target protection isn't a big deal, but we need to handle the div0
case.

Check the parent state explicitly to make sure we have a reasonable
positive value for the divisor.

Link: http://lkml.kernel.org/r/20200615140658.601684-1-hannes@cmpxchg.org
Fixes: 8a931f801340 ("mm: memcontrol: recursive memory.low protection")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Chris Down <chris@chrisdown.name>
Cc: Roman Gushchin <guro@fb.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: fix a warning while make xmldocs

This patch fixes following warning while "make xmldocs"

mm/vmalloc.c:1877: warning: Excess function parameter 'prot' description in 'vm_map_ram'

This warning started since commit d4efd79a81ab ("mm: remove the prot
argument from vm_map_ram").

Link: http://lkml.kernel.org/r/20200622152850.140871-1-standby24x7@gmail.com
Fixes: d4efd79a81ab ("mm: remove the prot argument from vm_map_ram")
Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

media: omap3isp: remove cacheflush.h

After mm.h was removed from the asm-generic version of cacheflush.h,
s390 allyesconfig shows several warnings of the following nature:

  In file included from arch/s390/include/generated/asm/cacheflush.h:1,
                   from drivers/media/platform/omap3isp/isp.c:42:
  include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration

As Geert and Laurent point out, this driver does not need this header in
the two files that include it.  Remove it so there are no warnings.

Link: http://lkml.kernel.org/r/20200622234740.72825-2-natechancellor@gmail.com
Fixes: e0cf615d725c ("asm-generic: don't include <linux/mm.h> in cacheflush.h")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

make asm-generic/cacheflush.h more standalone

Some s390 builds get these warnings:

  include/asm-generic/cacheflush.h:16:42: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:22:46: warning: 'struct mm_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:28:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:36:44: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:44:45: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:52:50: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:58:52: warning: 'struct address_space' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:75:17: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:74:45: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:82:16: warning: 'struct page' declared inside parameter list will not be visible outside of this definition or declaration
  include/asm-generic/cacheflush.h:81:50: warning: 'struct vm_area_struct' declared inside parameter list will not be visible outside of this definition or declaration

Forward declare the named structs to get rid of these.

Link: http://lkml.kernel.org/r/20200623135714.4dae4b8a@canb.auug.org.au
Fixes: e0cf615d725c ("asm-generic: don't include <linux/mm.h> in cacheflush.h")
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/debug_vm_pgtable: fix build failure with powerpc 8xx

Since commit 9e343b467c70 ("READ_ONCE: Enforce atomicity for
{READ,WRITE}_ONCE() memory accesses"), READ_ONCE() cannot be used
anymore to read complex page table entries.

This leads to:

      CC      mm/debug_vm_pgtable.o
    In file included from ./include/asm-generic/bug.h:5,
                     from ./arch/powerpc/include/asm/bug.h:109,
                     from ./include/linux/bug.h:5,
                     from ./include/linux/mmdebug.h:5,
                     from ./include/linux/gfp.h:5,
                     from mm/debug_vm_pgtable.c:13:
    In function 'pte_clear_tests',
        inlined from 'debug_vm_pgtable' at mm/debug_vm_pgtable.c:363:2:
    ./include/linux/compiler.h:392:38: error: Unsupported access size for {READ,WRITE}_ONCE().
    mm/debug_vm_pgtable.c:249:14: note: in expansion of macro 'READ_ONCE'
      249 |  pte_t pte = READ_ONCE(*ptep);
          |              ^~~~~~~~~
    make[2]: *** [mm/debug_vm_pgtable.o] Error 1

Fix it by using the recently added ptep_get() helper.

Link: http://lkml.kernel.org/r/6ca8c972e6c920dc4ae0d4affbed9703afa4d010.1592490570.git.christophe.leroy@csgroup.eu
Fixes: 9e343b467c70 ("READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: properly pte_offset_map_lock/unlock in vm_insert_pages()

Calls to pte_offset_map() in vm_insert_pages() are erroneously not
matched with a call to pte_unmap(). This would cause problems on
architectures where that is not a no-op.

This patch does away with the non-traditional locking in the existing
code, and instead uses pte_offset_map_lock/unlock() as usual,
incrementing PTE as necessary. The PTE pointer is kept within bounds
since we clamp it with PTRS_PER_PTE.

Link: http://lkml.kernel.org/r/20200618220446.20284-1-arjunroy.kdev@gmail.com
Fixes: 8cd3984d81d5 ("mm/memory.c: add vm_insert_pages()")
Signed-off-by: Arjun Roy <arjunroy@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix swap cache node allocation mask

Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:

  gnome-shell: page allocation failure: order:0,
  mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE),
  nodemask=(null),cpuset=/,mems_allowed=0
  CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1
  Call Trace:
    dump_stack+0x64/0x88
    warn_alloc.cold+0x75/0xd9
    __alloc_pages_slowpath.constprop.0+0xcfa/0xd30
    __alloc_pages_nodemask+0x2df/0x320
    alloc_slab_page+0x195/0x310
    allocate_slab+0x3c5/0x440
    ___slab_alloc+0x40c/0x5f0
    __slab_alloc+0x1c/0x30
    kmem_cache_alloc+0x20e/0x220
    xas_nomem+0x28/0x70
    add_to_swap_cache+0x321/0x400
    __read_swap_cache_async+0x105/0x240
    swap_cluster_readahead+0x22c/0x2e0
    shmem_swapin+0x8e/0xc0
    shmem_swapin_page+0x196/0x740
    shmem_getpage_gfp+0x3a2/0xa60
    shmem_read_mapping_page_gfp+0x32/0x60
    shmem_get_pages+0x155/0x5e0 [i915]
    __i915_gem_object_get_pages+0x68/0xa0 [i915]
    i915_vma_pin+0x3fe/0x6c0 [i915]
    eb_add_vma+0x10b/0x2c0 [i915]
    i915_gem_do_execbuffer+0x704/0x3430 [i915]
    i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915]
    drm_ioctl_kernel+0x86/0xd0 [drm]
    drm_ioctl+0x206/0x390 [drm]
    ksys_ioctl+0x82/0xc0
    __x64_sys_ioctl+0x16/0x20
    do_syscall_64+0x5b/0xf0
    entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils
Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: Chris Murphy <lists@colorremedies.com>
Analyzed-by: Vlastimil Babka <vbabka@suse.cz>
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Tested-by: Chris Murphy <lists@colorremedies.com>
Cc: <stable@vger.kernel.org> [3.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slub: cure list_slab_objects() from double fix

According to Christopher Lameter two fixes have been merged for the same
problem. As far as I can tell, the code does not acquire the list_lock
and invoke kmalloc(). list_slab_objects() misses an unlock (the
counterpart to get_map()) and the memory allocated in free_partial()
isn't used.

Revert the mentioned commit.

Link: http://lkml.kernel.org/r/20200618201234.795692-1-bigeasy@linutronix.de
Fixes: aa456c7aebb14 ("slub: remove kmalloc under list_lock from list_slab_objects() V2")
Link: https://lkml.kernel.org/r/alpine.DEB.2.22.394.2006181501480.12014@www.lameter.com
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab: use memzero_explicit() in kzfree()

The kzfree() function is normally used to clear some sensitive
information, like encryption keys, in the buffer before freeing it back to
the pool. Memset() is currently used for buffer clearing. However
unlikely, there is still a non-zero probability that the compiler may
choose to optimize away the memory clearing especially if LTO is being
used in the future.

To make sure that this optimization will never happen,
memzero_explicit(), which is introduced in v3.18, is now used in
kzfree() to future-proof it.

Link: http://lkml.kernel.org/r/20200616154311.12314-2-longman@redhat.com
Fixes: 3ef0e5ba4673 ("slab: introduce kzfree()")
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Cc: James Morris <jmorris@namei.org>
Cc: "Serge E. Hallyn" <serge@hallyn.com>
Cc: Joe Perches <joe@perches.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: "Jason A . Donenfeld" <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, slab: fix sign conversion problem in memcg_uncharge_slab()

It was found that running the LTP test on a PowerPC system could produce
erroneous values in /proc/meminfo, like:

  MemTotal:       531915072 kB
  MemFree:        507962176 kB
  MemAvailable:   1100020596352 kB

Using bisection, the problem is tracked down to commit 9c315e4d7d8c ("mm:
memcg/slab: cache page number in memcg_(un)charge_slab()").

In memcg_uncharge_slab() with a "int order" argument:

  unsigned int nr_pages = 1 << order;
    :
  mod_lruvec_state(lruvec, cache_vmstat_idx(s), -nr_pages);

The mod_lruvec_state() function will eventually call the
__mod_zone_page_state() which accepts a long argument.  Depending on the
compiler and how inlining is done, "-nr_pages" may be treated as a
negative number or a very large positive number.  Apparently, it was
treated as a large positive number in that PowerPC system leading to
incorrect stat counts.  This problem hasn't been seen in x86-64 yet,
perhaps the gcc compiler there has some slight difference in behavior.

It is fixed by making nr_pages a signed value.  For consistency, a similar
change is applied to memcg_charge_slab() as well.

Link: http://lkml.kernel.org/r/20200620184719.10994-1-longman@redhat.com
Fixes: 9c315e4d7d8c ("mm: memcg/slab: cache page number in memcg_(un)charge_slab()").
Signed-off-by: Waiman Long <longman@redhat.com>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: fix test_hmm.c reference after free

Coccinelle scripts report the following errors:

  lib/test_hmm.c:523:20-26: ERROR: reference preceded by free on line 521
  lib/test_hmm.c:524:21-27: ERROR: reference preceded by free on line 521
  lib/test_hmm.c:523:28-35: ERROR: devmem is NULL but dereferenced.
  lib/test_hmm.c:524:29-36: ERROR: devmem is NULL but dereferenced.

Fix these by using the local variable 'res' instead of devmem.

Link: http://lkml.kernel.org/r/c845c158-9c65-9665-0d0b-00342846dd07@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix value of OCFS2_INVALID_SLOT

In the ocfs2 disk layout, slot number is 16 bits, but in ocfs2
implementation, slot number is 32 bits.  Usually this will not cause any
issue, because slot number is converted from u16 to u32, but
OCFS2_INVALID_SLOT was defined as -1, when an invalid slot number from
disk was obtained, its value was (u16)-1, and it was converted to u32.
Then the following checking in get_local_system_inode will be always
skipped:

static struct inode **get_local_system_inode(struct ocfs2_super *osb,
                                               int type,
                                               u32 slot)
{
BUG_ON(slot == OCFS2_INVALID_SLOT);
...
}

Link: http://lkml.kernel.org/r/20200616183829.87211-5-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: fix panic on nfs server over ocfs2

The following kernel panic was captured when running nfs server over
ocfs2, at that time ocfs2_test_inode_bit() was checking whether one
inode locating at "blkno" 5 was valid, that is ocfs2 root inode, its
"suballoc_slot" was OCFS2_INVALID_SLOT(65535) and it was allocted from
//global_inode_alloc, but here it wrongly assumed that it was got from per
slot inode alloctor which would cause array overflow and trigger kernel
panic.

  BUG: unable to handle kernel paging request at 0000000000001088
  IP: [<ffffffff816f6898>] _raw_spin_lock+0x18/0xf0
  PGD 1e06ba067 PUD 1e9e7d067 PMD 0
  Oops: 0002 [#1] SMP
  CPU: 6 PID: 24873 Comm: nfsd Not tainted 4.1.12-124.36.1.el6uek.x86_64 #2
  Hardware name: Huawei CH121 V3/IT11SGCA1, BIOS 3.87 02/02/2018
  RIP: _raw_spin_lock+0x18/0xf0
  RSP: e02b:ffff88005ae97908  EFLAGS: 00010206
  RAX: ffff88005ae98000 RBX: 0000000000001088 RCX: 0000000000000000
  RDX: 0000000000020000 RSI: 0000000000000009 RDI: 0000000000001088
  RBP: ffff88005ae97928 R08: 0000000000000000 R09: ffff880212878e00
  R10: 0000000000007ff0 R11: 0000000000000000 R12: 0000000000001088
  R13: ffff8800063c0aa8 R14: ffff8800650c27d0 R15: 000000000000ffff
  FS:  0000000000000000(0000) GS:ffff880218180000(0000) knlGS:ffff880218180000
  CS:  e033 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 0000000000001088 CR3: 00000002033d0000 CR4: 0000000000042660
  Call Trace:
    igrab+0x1e/0x60
    ocfs2_get_system_file_inode+0x63/0x3a0 [ocfs2]
    ocfs2_test_inode_bit+0x328/0xa00 [ocfs2]
    ocfs2_get_parent+0xba/0x3e0 [ocfs2]
    reconnect_path+0xb5/0x300
    exportfs_decode_fh+0xf6/0x2b0
    fh_verify+0x350/0x660 [nfsd]
    nfsd4_putfh+0x4d/0x60 [nfsd]
    nfsd4_proc_compound+0x3d3/0x6f0 [nfsd]
    nfsd_dispatch+0xe0/0x290 [nfsd]
    svc_process_common+0x412/0x6a0 [sunrpc]
    svc_process+0x123/0x210 [sunrpc]
    nfsd+0xff/0x170 [nfsd]
    kthread+0xcb/0xf0
    ret_from_fork+0x61/0x90
  Code: 83 c2 02 0f b7 f2 e8 18 dc 91 ff 66 90 eb bf 0f 1f 40 00 55 48 89 e5 41 56 41 55 41 54 53 0f 1f 44 00 00 48 89 fb ba 00 00 02 00 <f0> 0f c1 17 89 d0 45 31 e4 45 31 ed c1 e8 10 66 39 d0 41 89 c6
  RIP   _raw_spin_lock+0x18/0xf0
  CR2: 0000000000001088
  ---[ end trace 7264463cd1aac8f9 ]---
  Kernel panic - not syncing: Fatal exception

Link: http://lkml.kernel.org/r/20200616183829.87211-4-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: load global_inode_alloc

Set global_inode_alloc as OCFS2_FIRST_ONLINE_SYSTEM_INODE, that will
make it load during mount. It can be used to test whether some
global/system inodes are valid. One use case is that nfsd will test
whether root inode is valid.

Link: http://lkml.kernel.org/r/20200616183829.87211-3-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ocfs2: avoid inode removal while nfsd is accessing it

Patch series "ocfs2: fix nfsd over ocfs2 issues", v2.

This is a series of patches to fix issues on nfsd over ocfs2. patch 1
is to avoid inode removed while nfsd access it patch 2 & 3 is to fix a
panic issue.

This patch (of 4):

When nfsd is getting file dentry using handle or parent dentry of some
dentry, one cluster lock is used to avoid inode removed from other node,
but it still could be removed from local node, so use a rw lock to avoid
this.

Link: http://lkml.kernel.org/r/20200616183829.87211-1-junxiao.bi@oracle.com
Link: http://lkml.kernel.org/r/20200616183829.87211-2-junxiao.bi@oracle.com
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kexec: do not verify the signature without the lockdown or mandatory signature

Signature verification is an important security feature, to protect
system from being attacked with a kernel of unknown origin.  Kexec
rebooting is a way to replace the running kernel, hence need be secured
carefully.

In the current code of handling signature verification of kexec kernel,
the logic is very twisted.  It mixes signature verification, IMA
signature appraising and kexec lockdown.

If there is no KEXEC_SIG_FORCE, kexec kernel image doesn't have one of
signature, the supported crypto, and key, we don't think this is wrong,
Unless kexec lockdown is executed.  IMA is considered as another kind of
signature appraising method.

If kexec kernel image has signature/crypto/key, it has to go through the
signature verification and pass.  Otherwise it's seen as verification
failure, and won't be loaded.

Seems kexec kernel image with an unqualified signature is even worse
than those w/o signature at all, this sounds very unreasonable.  E.g.
If people get a unsigned kernel to load, or a kernel signed with expired
key, which one is more dangerous?

So, here, let's simplify the logic to improve code readability.  If the
KEXEC_SIG_FORCE enabled or kexec lockdown enabled, signature
verification is mandated.  Otherwise, we lift the bar for any kernel
image.

Link: http://lkml.kernel.org/r/20200602045952.27487-1-lijiang@redhat.com
Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Reviewed-by: Jiri Bohac <jbohac@suse.cz>
Acked-by: Dave Young <dyoung@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: Matthew Garrett <mjg59@google.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, compaction: make capture control handling safe wrt interrupts

Hugh reports:

"While stressing compaction, one run oopsed on NULL capc->cc in
  __free_one_page()'s task_capc(zone): compact_zone_order() had been
  interrupted, and a page was being freed in the return from interrupt.

  Though you would not expect it from the source, both gccs I was using
  (4.8.1 and 7.5.0) had chosen to compile compact_zone_order() with the
  ".cc = &cc" implemented by mov %rbx,-0xb0(%rbp) immediately before
  callq compact_zone - long after the "current->capture_control =
  &capc". An interrupt in between those finds capc->cc NULL (zeroed by
  an earlier rep stos).

  This could presumably be fixed by a barrier() before setting
  current->capture_control in compact_zone_order(); but would also need
  more care on return from compact_zone(), in order not to risk leaking
  a page captured by interrupt just before capture_control is reset.

  Maybe that is the preferable fix, but I felt safer for task_capc() to
  exclude the rather surprising possibility of capture at interrupt
  time"

I have checked that gcc10 also behaves the same.

The advantage of fix in compact_zone_order() is that we don't add
another test in the page freeing hot path, and that it might prevent
future problems if we stop exposing pointers to uninitialized structures
in current task.

So this patch implements the suggestion for compact_zone_order() with
barrier() (and WRITE_ONCE() to prevent store tearing) for setting
current->capture_control, and prevents page leaking with
WRITE_ONCE/READ_ONCE in the proper order.

Link: http://lkml.kernel.org/r/20200616082649.27173-1-vbabka@suse.cz
Fixes: 5e1f0f098b46 ("mm, compaction: capture a page under direct compaction")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Hugh Dickins <hughd@google.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Li Wang <liwang@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [5.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: do_swap_page(): fix up the error code

do_swap_page() returns error codes from the VM_FAULT* space.  try_charge()
might return -ENOMEM, though, and then do_swap_page() simply returns 0
which means a success.

We almost never return ENOMEM for GFP_KERNEL single page charge.  Except
for async OOM handling (oom_disabled v1).  So this needs translation to
VM_FAULT_OOM otherwise the the page fault path will not notify the
userspace and wait for an action.

Link: http://lkml.kernel.org/r/20200617090238.GL9499@dhcp22.suse.cz
Fixes: 4c6355b25e8b ("mm: memcontrol: charge swapin pages on instantiation")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

openrisc: fix boot oops when DEBUG_VM is enabled

Since v5.8-rc1 OpenRISC Linux fails to boot when DEBUG_VM is enabled.
This has been bisected to commit 42fc541404f2 ("mmap locking API: add
mmap_assert_locked() and mmap_assert_write_locked()").

The added locking checks exposed the issue that OpenRISC was not taking
this mmap lock when during page walks for DMA operations. This patch
locks and unlocks the mmap lock for page walking.

Link: http://lkml.kernel.org/r/20200617090247.1680188-1-shorne@gmail.com
Fixes: 42fc541404f2 ("mmap locking API: add mmap_assert_locked() and mmap_assert_write_locked()"
Signed-off-by: Stafford Horne <shorne@gmail.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Steven Price <steven.price@arm.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'drm-misc-fixes-2020-06-25' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

Short summary of fixes pull (less than what git shortlog provides):

* In mcde, set up fbdev after device registration and removde the last access
to dev->dev_private. Fixes an error message and a segmentation fault.

* Set the connector type for LogicPT Type 28 and newhaven_nhd_43_480272ef_atxl
panels.

* In uvesafb, fix the handling of the noblank option.

* Fix panel orientation for Asus T101HA and Acer S1003.

* Fix DMA configuration for sun4i if IOMMU is present.

* Fix regression in VT restoration. Unbreaks userspace (i.e., Xorg) VT handling.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200625082717.GA14856@linux-uq9g

Merge git://git./linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

1) Don't insert ESP trailer twice in IPSEC code, from Huy Nguyen.

2) The default crypto algorithm selection in Kconfig for IPSEC is out
    of touch with modern reality, fix this up. From Eric Biggers.

3) bpftool is missing an entry for BPF_MAP_TYPE_RINGBUF, from Andrii
    Nakryiko.

4) Missing init of ->frame_sz in xdp_convert_zc_to_xdp_frame(), from
    Hangbin Liu.

5) Adjust packet alignment handling in ax88179_178a driver to match
    what the hardware actually does. From Jeremy Kerr.

6) register_netdevice can leak in the case one of the notifiers fail,
    from Yang Yingliang.

7) Use after free in ip_tunnel_lookup(), from Taehee Yoo.

8) VLAN checks in sja1105 DSA driver need adjustments, from Vladimir
    Oltean.

9) tg3 driver can sleep forever when we get enough EEH errors, fix from
    David Christensen.

10) Missing {READ,WRITE}_ONCE() annotations in various Intel ethernet
    drivers, from Ciara Loftus.

11) Fix scanning loop break condition in of_mdiobus_register(), from
    Florian Fainelli.

12) MTU limit is incorrect in ibmveth driver, from Thomas Falcon.

13) Endianness fix in mlxsw, from Ido Schimmel.

14) Use after free in smsc95xx usbnet driver, from Tuomas Tynkkynen.

15) Missing bridge mrp configuration validation, from Horatiu Vultur.

16) Fix circular netns references in wireguard, from Jason A. Donenfeld.

17) PTP initialization on recovery is not done properly in qed driver,
    from Alexander Lobakin.

18) Endian conversion of L4 ports in filters of cxgb4 driver is wrong,
    from Rahul Lakkireddy.

19) Don't clear bound device TX queue of socket prematurely otherwise we
    get problems with ktls hw offloading, from Tariq Toukan.

20) ipset can do atomics on unaligned memory, fix from Russell King.

21) Align ethernet addresses properly in bridging code, from Thomas
    Martitz.

22) Don't advertise ipv4 addresses on SCTP sockets having ipv6only set,
    from Marcelo Ricardo Leitner.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (149 commits)
  rds: transport module should be auto loaded when transport is set
  sch_cake: fix a few style nits
  sch_cake: don't call diffserv parsing code when it is not needed
  sch_cake: don't try to reallocate or unshare skb unconditionally
  ethtool: fix error handling in linkstate_prepare_data()
  wil6210: account for napi_gro_receive never returning GRO_DROP
  hns: do not cast return value of napi_gro_receive to null
  socionext: account for napi_gro_receive never returning GRO_DROP
  wireguard: receive: account for napi_gro_receive never returning GRO_DROP
  vxlan: fix last fdb index during dump of fdb with nhid
  sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket
  tc-testing: avoid action cookies with odd length.
  bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT
  net: dsa: sja1105: fix tc-gate schedule with single element
  net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules
  net: dsa: sja1105: unconditionally free old gating config
  net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top
  net: macb: free resources on failure path of at91ether_open()
  net: macb: call pm_runtime_put_sync on failure path
  ...

rds: transport module should be auto loaded when transport is set

This enhancement auto loads transport module when the transport
is set via SO_RDS_TRANSPORT socket option.

Reviewed-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com>
Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Rao Shoaib <rao.shoaib@oracle.com>
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sched-A-couple-of-fixes-for-sch_cake'

Toke Høiland-Jørgensen says:

====================
sched: A couple of fixes for sch_cake

This series contains a couple of fixes for diffserv handling in sch_cake that
provide a nice speedup (with a somewhat pedantic nit fix tacked on to the end).

Not quite sure about whether this should go to stable; it does provide a nice
speedup, but it's not strictly a fix in the "correctness" sense. I lean towards
including this in stable as well, since our most important consumer of that
(OpenWrt) is likely to backport the series anyway.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: fix a few style nits

I spotted a few nits when comparing the in-tree version of sch_cake with
the out-of-tree one: A redundant error variable declaration shadowing an
outer declaration, and an indentation alignment issue. Fix both of these.

Fixes: 046f6fd5daef ("sched: Add Common Applications Kept Enhanced (cake) qdisc")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: don't call diffserv parsing code when it is not needed

As a further optimisation of the diffserv parsing codepath, we can skip it
entirely if CAKE is configured to neither use diffserv-based
classification, nor to zero out the diffserv bits.

Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sch_cake: don't try to reallocate or unshare skb unconditionally

cake_handle_diffserv() tries to linearize mac and network header parts of
skb and to make it writable unconditionally. In some cases it leads to full
skb reallocation, which reduces throughput and increases CPU load. Some
measurements of IPv4 forward + NAPT on MIPS router with 580 MHz single-core
CPU was conducted. It appears that on kernel 4.9 skb_try_make_writable()
reallocates skb, if skb was allocated in ethernet driver via so-called
'build skb' method from page cache (it was discovered by strange increase
of kmalloc-2048 slab at first).

Obtain DSCP value via read-only skb_header_pointer() call, and leave
linearization only for DSCP bleaching or ECN CE setting. And, as an
additional optimisation, skip diffserv parsing entirely if it is not needed
by the current configuration.

Fixes: c87b4ecdbe8d ("sch_cake: Make sure we can write the IP header before changing DSCP bits")
Signed-off-by: Ilya Ponetayev <i.ponetaev@ndmsystems.com>
[ fix a few style issues, reflow commit message ]
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ethtool: fix error handling in linkstate_prepare_data()

When getting SQI or maximum SQI value fails in linkstate_prepare_data(), we
must not return without calling ethnl_ops_complete(dev) as that could
result in imbalance between ethtool_ops ->begin() and ->complete() calls.

Fixes: 806602191592 ("ethtool: provide UAPI for PHY Signal Quality Index (SQI)")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'trace-v5.8-rc2' of git://git./linux/kernel/git/rostedt/linux-trace

Pull tracing fixes from Steven Rostedt:
"Four small fixes:

   - Fix a ringbuffer bug for nested events having time go backwards

   - Fix a config dependency for boot time tracing to depend on
     synthetic events instead of histograms.

   - Fix trigger format parsing to handle multiple spaces

   - Fix bootconfig to handle failures in multiple events"

* tag 'trace-v5.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/boottime: Fix kprobe multiple events
  tracing: Fix event trigger to accept redundant spaces
  tracing/boot: Fix config dependency for synthedic event
  ring-buffer: Zero out time extend if it is nested and not absolute

Merge branch 'napi_gro_receive-caller-return-value-cleanups'

Jason A. Donenfeld says:

====================
napi_gro_receive caller return value cleanups

In 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in
napi_gro_receive()"), the GRO_NORMAL case stopped calling
netif_receive_skb_internal, checking its return value, and returning
GRO_DROP in case it failed. Instead, it calls into
netif_receive_skb_list_internal (after a bit of indirection), which
doesn't return any error. Therefore, napi_gro_receive will never return
GRO_DROP, making handling GRO_DROP dead code.

I emailed the author of 6570bc79c0df on netdev [1] to see if this change
was intentional, but the dlink.ru email address has been disconnected,
and looking a bit further myself, it seems somewhat infeasible to start
propagating return values backwards from the internal machinations of
netif_receive_skb_list_internal.

Taking a look at all the callers of napi_gro_receive, it appears that
three are checking the return value for the purpose of comparing it to
the now never-happening GRO_DROP, and one just casts it to (void), a
likely historical leftover. Every other of the 120 callers does not
bother checking the return value.

And it seems like these remaining 116 callers are doing the right thing:
after calling napi_gro_receive, the packet is now in the hands of the
upper layers of the newtworking, and the device driver itself has no
business now making decisions based on what the upper layers choose to
do. Incrementing stats counters on GRO_DROP seems like a mistake, made
by these three drivers, but not by the remaining 117.

It would seem, therefore, that after rectifying these four callers of
napi_gro_receive, that I should go ahead and just remove returning the
value from napi_gro_receive all together. However, napi_gro_receive has
a function event tracer, and being able to introspect into the
networking stack to see how often napi_gro_receive is returning whatever
interesting GRO status (aside from _DROP) remains an interesting
data point worth keeping for debugging.

So, this series simply gets rid of the return value checking for the
four useless places where that check never evaluates to anything
meaningful.

[1] https://lore.kernel.org/netdev/20200624210606.GA1362687@zx2c4.com/
====================

Acked-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wil6210: account for napi_gro_receive never returning GRO_DROP

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands. In this case, too, the non-gro path didn't bother checking
the return value. Plus, this had some clunky debugging functions that
duplicated code from elsewhere and was generally pretty messy. So, this
commit cleans that all up too.

Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hns: do not cast return value of napi_gro_receive to null

Basically no drivers care about the return value here, and there's no
__must_check that would make casting to void sensible, so remove it.

Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

socionext: account for napi_gro_receive never returning GRO_DROP

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.

Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

wireguard: receive: account for napi_gro_receive never returning GRO_DROP

The napi_gro_receive function no longer returns GRO_DROP ever, making
handling GRO_DROP dead code. This commit removes that dead code.
Further, it's not even clear that device drivers have any business in
taking action after passing off received packets; that's arguably out of
their hands.

Fixes: e7096c131e51 ("net: WireGuard secure network tunnel")
Fixes: 6570bc79c0df ("net: core: use listified Rx for GRO_NORMAL in napi_gro_receive()")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: fix last fdb index during dump of fdb with nhid

This patch fixes last saved fdb index in fdb dump handler when
handling fdb's with nhid.

Fixes: 1274e1cc4226 ("vxlan: ecmp support for mac fdb entries")
Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: Don't advertise IPv4 addresses if ipv6only is set on the socket

If a socket is set ipv6only, it will still send IPv4 addresses in the
INIT and INIT_ACK packets. This potentially misleads the peer into using
them, which then would cause association termination.

The fix is to not add IPv4 addresses to ipv6only sockets.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Tested-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tc-testing: avoid action cookies with odd length.

Update odd length cookie hexstrings in csum.json, tunnel_key.json and
bpf.json to be even length to comply with check enforced in commit
0149dabf2a1b ("tc: m_actions: check cookie hexstring len") in iproute2.

Signed-off-by: Briana Oursler <briana.oursler@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'tcp_cubic-fix-spurious-HYSTART_DELAY-on-RTT-decrease'

Neal Cardwell says:

====================
tcp_cubic: fix spurious HYSTART_DELAY on RTT decrease

This series fixes a long-standing bug in the TCP CUBIC
HYSTART_DELAY mechanim recently reported by Mirja Kuehlewind. The
code can cause a spurious exit of slow start in some particular
cases: upon an RTT decrease that happens on the 9th or later ACK
in a round trip. This series fixes the original Hystart code and
also the recent BPF implementation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: tcp: bpf_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT

Apply the fix from:
"tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT"
to the BPF implementation of TCP CUBIC congestion control.

Repeating the commit description here for completeness:

Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:

o The first 8 RTT samples in a round trip are 150ms, resulting in a
  curr_rtt of 150ms and a delay_min of 150ms.

o The 9th RTT sample is 100ms. The curr_rtt does not change after the
  first 8 samples, so curr_rtt remains 150ms. But delay_min can be
  lowered at any time, so delay_min falls to 100ms. The code executes
  the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
  of 100ms, and the curr_rtt is declared far enough above delay_min to
  force a (spurious) exit of Slow start.

The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.

Fixes: 6de4a9c430b5 ("bpf: tcp: Add bpf_cubic example")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp_cubic: fix spurious HYSTART_DELAY exit upon drop in min RTT

Mirja Kuehlewind reported a bug in Linux TCP CUBIC Hystart, where
Hystart HYSTART_DELAY mechanism can exit Slow Start spuriously on an
ACK when the minimum rtt of a connection goes down. From inspection it
is clear from the existing code that this could happen in an example
like the following:

o The first 8 RTT samples in a round trip are 150ms, resulting in a
  curr_rtt of 150ms and a delay_min of 150ms.

o The 9th RTT sample is 100ms. The curr_rtt does not change after the
  first 8 samples, so curr_rtt remains 150ms. But delay_min can be
  lowered at any time, so delay_min falls to 100ms. The code executes
  the HYSTART_DELAY comparison between curr_rtt of 150ms and delay_min
  of 100ms, and the curr_rtt is declared far enough above delay_min to
  force a (spurious) exit of Slow start.

The fix here is simple: allow every RTT sample in a round trip to
lower the curr_rtt.

Fixes: ae27e98a5152 ("[TCP] CUBIC v2.3")
Reported-by: Mirja Kuehlewind <mirja.kuehlewind@ericsson.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'Fixes-for-SJA1105-DSA-tc-gate-action'

Vladimir Oltean says:

====================
Fixes for SJA1105 DSA tc-gate action

This small series fixes 2 bugs in the tc-gate implementation:
1. The TAS state machine keeps getting rescheduled even after removing
   tc-gate actions on all ports.
2. tc-gate actions with only one gate control list entry are installed
   to hardware with an incorrect interval of zero, which makes the
   switch erroneously drop those packets (since the configuration is
   invalid).

To keep the code palatable, a forward-declaration was avoided by moving
some code around in patch 1/4. I hope that isn't too much of an issue.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: fix tc-gate schedule with single element

The sja1105_gating_cfg_time_to_interval function does this, as per the
comments:

/* The gate entries contain absolute times in their e->interval field. Convert
* that to proper intervals (i.e. "0, 5, 10, 15" to "5, 5, 5, 5").
*/

To perform that task, it iterates over gating_cfg->entries, at each step
updating the interval of the _previous_ entry. So one interval remains
to be updated at the end of the loop: the last one (since it isn't
"prev" for anyone else).

But there was an erroneous check, that the last element's interval
should not be updated if it's also the only element. I'm not quite sure
why that check was there, but it's clearly incorrect, as a tc-gate
schedule with a single element would get an e->interval of zero,
regardless of the duration requested by the user. The switch wouldn't
even consider this configuration as valid: it will just drop all traffic
that matches the rule.

Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: recalculate gating subschedule after deleting tc-gate rules

Currently, tas_data->enabled would remain true even after deleting all
tc-gate rules from the switch ports, which would cause the
sja1105_tas_state_machine to get unnecessarily scheduled.

Also, if there were any errors which would prevent the hardware from
enabling the gating schedule, the sja1105_tas_state_machine would
continuously detect and print that, spamming the kernel log, even if the
rules were subsequently deleted.

The rules themselves are _not_ active, because sja1105_init_scheduling
does enough of a job to not install the gating schedule in the static
config. But the virtual link rules themselves are still present.

So call the functions that remove the tc-gate configuration from
priv->tas_data.gating_cfg, so that tas_data->enabled can be set to
false, and sja1105_tas_state_machine will stop from being scheduled.

Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: unconditionally free old gating config

Currently sja1105_compose_gating_subschedule is not prepared to be
called for the case where we want to recompute the global tc-gate
configuration after we've deleted those actions on a port.

After deleting the tc-gate actions on the last port, max_cycle_time
would become zero, and that would incorrectly prevent
sja1105_free_gating_config from getting called.

So move the freeing function above the check for the need to apply a new
configuration.

Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: sja1105: move sja1105_compose_gating_subschedule at the top

It turns out that sja1105_compose_gating_subschedule must also be called
from sja1105_vl_delete, to recalculate the overall tc-gate
configuration. Currently this is not possible without introducing a
forward declaration. So move the function at the top of the file, along
with its dependencies.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: free resources on failure path of at91ether_open()

DMA buffers were not freed on failure path of at91ether_open().
Along with changes for freeing the DMA buffers the enable/disable
interrupt instructions were moved to at91ether_start()/at91ether_stop()
functions and the operations on at91ether_stop() were done in
their reverse order (compared with how is done in at91ether_start()):
before this patch the operation order on interface open path
was as follows:
1/ alloc DMA buffers
2/ enable tx, rx
3/ enable interrupts
and the order on interface close path was as follows:
1/ disable tx, rx
2/ disable interrupts
3/ free dma buffers.

Fixes: 7897b071ac3b ("net: macb: convert to phylink")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: call pm_runtime_put_sync on failure path

Call pm_runtime_put_sync() on failure path of at91ether_open.

Fixes: e6a41c23df0d ("net: macb: ensure interface is not suspended on at91rm9200")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'fsnotify_for_v5.8-rc3' of git://git./linux/kernel/git/jack/linux-fs

Pull fsnotify fixlet from Jan Kara:
"A performance improvement to reduce impact of fsnotify for inodes
where it isn't used"

* tag 'fsnotify_for_v5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fs: Do not check if there is a fsnotify watcher on pseudo inodes

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net, they are:

1) Unaligned atomic access in ipset, from Russell King.

2) Missing module description, from Rob Gill.

3) Patches to fix a module unload causing NULL pointer dereference in
   xtables, from David Wilder. For the record, I posting here his cover
   letter explaining the problem:

    A crash happened on ppc64le when running ltp network tests triggered by
    "rmmod iptable_mangle".

    See previous discussion in this thread:
    https://lists.openwall.net/netdev/2020/06/03/161 .

    In the crash I found in iptable_mangle_hook() that
    state->net->ipv4.iptable_mangle=NULL causing a NULL pointer dereference.
    net->ipv4.iptable_mangle is set to NULL in +iptable_mangle_net_exit() and
    called when ip_mangle modules is unloaded. A rmmod task was found running
    in the crash dump.  A 2nd crash showed the same problem when running
    "rmmod iptable_filter" (net->ipv4.iptable_filter=NULL).

    To fix this I added .pre_exit hook in all iptable_foo.c. The pre_exit will
    un-register the underlying hook and exit would do the table freeing. The
    netns core does an unconditional +synchronize_rcu after the pre_exit hooks
    insuring no packets are in flight that have picked up the pointer before
    completing the un-register.

    These patches include changes for both iptables and ip6tables.

    We tested this fix with ltp running iptables01.sh and iptables01.sh -6 a
    loop for 72 hours.

4) Add a selftest for conntrack helper assignment, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: bridge: enfore alignment for ethernet address

The eth_addr member is passed to ether_addr functions that require
2-byte alignment, therefore the member must be properly aligned
to avoid unaligned accesses.

The problem is in place since the initial merge of multicast to unicast:
commit 6db6f0eae6052b70885562e1733896647ec1d807 bridge: multicast to unicast

Fixes: 6db6f0eae605 ("bridge: multicast to unicast")
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Thomas Martitz <t.martitz@avm.de>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Several regression fixes from work that landed in the merge window,
  particularly in the mlx5 driver:

   - Various static checker and warning fixes

   - General bug fixes in rvt, qedr, hns, mlx5 and hfi1

   - Several regression fixes related to the ECE and QP changes in last
     cycle

   - Fixes for a few long standing crashers in CMA, uverbs ioctl, and
     xrc"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (25 commits)
  IB/hfi1: Add atomic triggered sleep/wakeup
  IB/hfi1: Correct -EBUSY handling in tx code
  IB/hfi1: Fix module use count flaw due to leftover module put calls
  IB/hfi1: Restore kfree in dummy_netdev cleanup
  IB/mad: Fix use after free when destroying MAD agent
  RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata
  RDMA/counter: Query a counter before release
  RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()
  RDMA/mlx5: Fix integrity enabled QP creation
  RDMA/mlx5: Remove ECE limitation from the RAW_PACKET QPs
  RDMA/mlx5: Fix remote gid value in query QP
  RDMA/mlx5: Don't access ib_qp fields in internal destroy QP path
  RDMA/core: Check that type_attrs is not NULL prior access
  RDMA/hns: Fix an cmd queue issue when resetting
  RDMA/hns: Fix a calltrace when registering MR from userspace
  RDMA/mlx5: Add missed RST2INIT and INIT2INIT steps during ECE handshake
  RDMA/cma: Protect bind_list and listen_list while finding matching cm id
  RDMA/qedr: Fix KASAN: use-after-free in ucma_event_handler+0x532
  RDMA/efa: Set maximum pkeys device attribute
  RDMA/rvt: Fix potential memory leak caused by rvt_alloc_rq
  ...

tcp: don't ignore ECN CWR on pure ACK

there is a problem with the CWR flag set in an incoming ACK segment
and it leads to the situation when the ECE flag is latched forever

the following packetdrill script shows what happens:

// Stack receives incoming segments with CE set
+0.1 <[ect0]  . 11001:12001(1000) ack 1001 win 65535
+0.0 <[ce]    . 12001:13001(1000) ack 1001 win 65535
+0.0 <[ect0] P. 13001:14001(1000) ack 1001 win 65535

// Stack repsonds with ECN ECHO
+0.0 >[noecn]  . 1001:1001(0) ack 12001
+0.0 >[noecn] E. 1001:1001(0) ack 13001
+0.0 >[noecn] E. 1001:1001(0) ack 14001

// Write a packet
+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0] PE. 1001:2001(1000) ack 14001

// Pure ACK received
+0.01 <[noecn] W. 14001:14001(0) ack 2001 win 65535

// Since CWR was sent, this packet should NOT have ECE set

+0.1 write(3, ..., 1000) = 1000
+0.0 >[ect0]  P. 2001:3001(1000) ack 14001
// but Linux will still keep ECE latched here, with packetdrill
// flagging a missing ECE flag, expecting
// >[ect0] PE. 2001:3001(1000) ack 14001
// in the script

In the situation above we will continue to send ECN ECHO packets
and trigger the peer to reduce the congestion window. To avoid that
we can check CWR on pure ACKs received.

v3:
- Add a sequence check to avoid sending an ACK to an ACK

v2:
- Adjusted the comment
- move CWR check before checking for unacknowledged packets

Signed-off-by: Denis Kirjanov <denis.kirjanov@suse.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: mscc: avoid skcipher API for single block AES encryption

The skcipher API dynamically instantiates the transformation object
on request that implements the requested algorithm optimally on the
given platform. This notion of optimality only matters for cases like
bulk network or disk encryption, where performance can be a bottleneck,
or in cases where the algorithm itself is not known at compile time.

In the mscc case, we are dealing with AES encryption of a single
block, and so neither concern applies, and we are better off using
the AES library interface, which is lightweight and safe for this
kind of use.

Note that the scatterlist API does not permit references to buffers
that are located on the stack, so the existing code is incorrect in
any case, but avoiding the skcipher and scatterlist APIs entirely is
the most straight-forward approach to fixing this.

Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Fixes: 28c5107aa904e ("net: phy: mscc: macsec support")
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 's390-5.8-3' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Heiko Carstens:

- Fix kernel crash on system call single stepping.

- Make sure early program check handler is executed with DAT on to
   avoid an endless program check loop.

- Add __GFP_NOWARN flag to debug feature to avoid user triggerable
   allocation failure messages.

* tag 's390-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/debug: avoid kernel warning on too large number of pages
  s390/kasan: fix early pgm check handler execution
  s390: fix system call single stepping

Merge tag 'sound-5.8-rc3' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
"A collection of small fixes gathered in the last two weeks.

  The major changes here are fixes for the recent DPCM regressions found
  on i.MX and Qualcomm platforms and fixes for resource leaks in ASoC
  DAI registrations.

  Other than those are mostly device-specific fixes including the usual
  USB- and HD-audio quirks, and a fix for syzkaller case and ID updates
  for new Intel platforms"

* tag 'sound-5.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (32 commits)
  ALSA: usb-audio: Fix OOB access of mixer element list
  ALSA: usb-audio: add quirk for Samsung USBC Headset (AKG)
  ALSA: usb-audio: Add registration quirk for Kingston HyperX Cloud Flight S
  ASoC: rockchip: Fix a reference count leak.
  ASoC: amd: closing specific instance.
  ALSA: hda: Intel: add missing PCI IDs for ICL-H, TGL-H and EKL
  ASoC: hdac_hda: fix memleak with regmap not freed on remove
  ASoC: SOF: Intel: add PCI IDs for ICL-H and TGL-H
  ASoC: SOF: Intel: add PCI ID for CometLake-S
  ASoC: Intel: SOF: merge COMETLAKE_LP and COMETLAKE_H
  ALSA: hda/realtek: Add mute LED and micmute LED support for HP systems
  ALSA: usb-audio: Fix potential use-after-free of streams
  ALSA: hda/realtek - Add quirk for MSI GE63 laptop
  ASoC: fsl_ssi: Fix bclk calculation for mono channel
  ASoC: SOF: Intel: hda: Clear RIRB status before reading WP
  ASoC: rt1015: Update rt1015 default register value according to spec modification.
  ASoC: qcom: common: set correct directions for dailinks
  ASoc: q6afe: add support to get port direction
  ASoC: soc-pcm: fix checks for multi-cpu FE dailinks
  ASoC: rt5682: Let dai clks be registered whether mclk exists or not
  ...

Merge tag 'amd-drm-fixes-5.8-2020-06-24' of git://people.freedesktop.org/~agd5f/linux into drm-fixes

amd-drm-fixes-5.8-2020-06-24:

amdgpu:
- Fix missed mutex unlock in DC error path
- Fix firmware leak for sdma5
- DC bpc property fixes

amdkfd:
- Fix memleak in an error path

radeon:
- Fix copy paste typo in NI DPM spll validation

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624221207.17773-1-alexander.deucher@amd.com

Merge branch 'net-bcmgenet-use-hardware-padding-of-runt-frames'

Doug Berger says:

====================
net: bcmgenet: use hardware padding of runt frames

Now that scatter-gather and tx-checksumming are enabled by default
it revealed a packet corruption issue that can occur for very short
fragmented packets.

When padding these frames to the minimum length it is possible for
the non-linear (fragment) data to be added to the end of the linear
header in an SKB. Since the number of fragments is read before the
padding and used afterward without reloading, the fragment that
should have been consumed can be tacked on in place of part of the
padding.

The third commit in this set corrects this by removing the software
padding and allowing the hardware to add the pad bytes if necessary.

The first two commits resolve warnings observed by the kbuild test
robot and are included here for simplicity of application.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: use hardware padding of runt frames

When commit 474ea9cafc45 ("net: bcmgenet: correctly pad short
packets") added the call to skb_padto() it should have been
located before the nr_frags parameter was read since that value
could be changed when padding packets with lengths between 55
and 59 bytes (inclusive).

The use of a stale nr_frags value can cause corruption of the
pad data when tx-scatter-gather is enabled. This corruption of
the pad can cause invalid checksum computation when hardware
offload of tx-checksum is also enabled.

Since the original reason for the padding was corrected by
commit 7dd399130efb ("net: bcmgenet: fix skb_len in
bcmgenet_xmit_single()") we can remove the software padding all
together and make use of hardware padding of short frames as
long as the hardware also always appends the FCS value to the
frame.

Fixes: 474ea9cafc45 ("net: bcmgenet: correctly pad short packets")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: use __be16 for htons(ETH_P_IP)

The 16-bit value that holds a short in network byte order should
be declared as a restricted big endian type to allow type checks
to succeed during assignment.

Fixes: 3e370952287c ("net: bcmgenet: add support for ethtool rxnfc flows")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: re-remove bcmgenet_hfb_add_filter

This function was originally removed by Baoyou Xie in
commit e2072600a241 ("net: bcmgenet: remove unused function in
bcmgenet.c") to prevent a build warning.

Some of the functions removed by Baoyou Xie are now used for
WAKE_FILTER support so his commit was reverted, but this function
is still unused and the kbuild test robot dutifully reported the
warning.

This commit once again removes the remaining unused hfb functions.

Fixes: 14da1510fedc ("Revert "net: bcmgenet: remove unused function in bcmgenet.c"")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm/tegra/for-5.8-rc3' of git://anongit.freedesktop.org/tegra/linux into drm-fixes

drm/tegra: Fixes for v5.8-rc3

This contains a fairly random assortment of fixes for various minor
issues.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624165254.2763104-1-thierry.reding@gmail.com

Merge tag 'du-fixes-20200621' of git://linuxtv.org/pinchartl/media into drm-fixes

Build fix for the R-Car DU DRM driver

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200621021720.GA1569@pendragon.ideasonboard.com

Merge tag 'erofs-for-5.8-rc3-fixes' of git://git./linux/kernel/git/xiang/erofs

Pull erofs fix from Gao Xiang:
"Fix a regression which uses potential uninitialized high 32-bit value
unexpectedly recently observed with specific compiler options"

* tag 'erofs-for-5.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: fix partially uninitialized misuse in z_erofs_onlinepage_fixup

selftests: netfilter: add test case for conntrack helper assignment

check that 'nft ... ct helper set <foo>' works:
1. configure ftp helper via nft and assign it to
connections on port 2121
2. check with 'conntrack -L' that the next connection
has the ftp helper attached to it.

Also add a test for auto-assign (old behaviour).

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6tables: Add a .pre_exit hook in all ip6table_foo.c.

Using new helpers ip6t_unregister_table_pre_exit() and
ip6t_unregister_table_exit().

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6tables: Split ip6t_unregister_table() into pre_exit and exit helpers.

The pre_exit will un-register the underlying hook and .exit will do
the table freeing. The netns core does an unconditional synchronize_rcu
after the pre_exit hooks insuring no packets are in flight that have
picked up the pointer before completing the un-register.

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: iptables: Add a .pre_exit hook in all iptable_foo.c.

Using new helpers ipt_unregister_table_pre_exit() and
ipt_unregister_table_exit().

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: iptables: Split ipt_unregister_table() into pre_exit and exit helpers.

The pre_exit will un-register the underlying hook and .exit will do the
table freeing. The netns core does an unconditional synchronize_rcu after
the pre_exit hooks insuring no packets are in flight that have picked up
the pointer before completing the un-register.

Fixes: b9e69e127397 ("netfilter: xtables: don't hook tables by default")
Signed-off-by: David Wilder <dwilder@us.ibm.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: Add MODULE_DESCRIPTION entries to kernel modules

The user tool modinfo is used to get information on kernel modules, including a
description where it is available.

This patch adds a brief MODULE_DESCRIPTION to netfilter kernel modules
(descriptions taken from Kconfig file or code comments)

Signed-off-by: Rob Gill <rrobgill@protonmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ipset: fix unaligned atomic access

When using ip_set with counters and comment, traffic causes the kernel
to panic on 32-bit ARM:

Alignment trap: not handling instruction e1b82f9f at [<bf01b0dc>]
Unhandled fault: alignment exception (0x221) at 0xea08133c
PC is at ip_set_match_extensions+0xe0/0x224 [ip_set]

The problem occurs when we try to update the 64-bit counters - the
faulting address above is not 64-bit aligned. The problem occurs
due to the way elements are allocated, for example:

set->dsize = ip_set_elem_len(set, tb, 0, 0);
map = ip_set_alloc(sizeof(*map) + elements * set->dsize);

If the element has a requirement for a member to be 64-bit aligned,
and set->dsize is not a multiple of 8, but is a multiple of four,
then every odd numbered elements will be misaligned - and hitting
an atomic64_add() on that element will cause the kernel to panic.

ip_set_elem_len() must return a size that is rounded to the maximum
alignment of any extension field stored in the element. This change
ensures that is the case.

Fixes: 95ad1f4a9358 ("netfilter: ipset: Fix extension alignment")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Acked-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

drm/amd: fix potential memleak in err branch

The function kobject_init_and_add alloc memory like:
kobject_init_and_add->kobject_add_varg->kobject_set_name_vargs
->kvasprintf_const->kstrdup_const->kstrdup->kmalloc_track_caller
->kmalloc_slab, in err branch this memory not free. If use
kmemleak, this path maybe catched.
These changes are to add kobject_put in kobject_init_and_add
failed branch, fix potential memleak.

Signed-off-by: Bernard Zhao <bernard@vivo.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix ineffective setting of max bpc property

[Why]
Regression was introduced where setting max bpc property has no effect
on the atomic check and final commit. It has the same effect as max bpc
being stuck at 8.

[How]
Correctly propagate max bpc with the new connector state.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Enable output_bpc property on all outputs

[Why]
Connector property output_bpc is available on DP/eDP only. New IGT tests
would benifit if this property works on HDMI.

[How]
Enable this read-only property on all types of connectors.

Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: add fw release for sdma v5_0

sdma fw isn't released when module exit

Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Wenhui Sheng <Wenhui.Sheng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

qed: add missing error test for DBG_STATUS_NO_MATCHING_FRAMING_MODE

The error DBG_STATUS_NO_MATCHING_FRAMING_MODE was added to the enum
enum dbg_status however there is a missing corresponding entry for
this in the array s_status_str. This causes an out-of-bounds read when
indexing into the last entry of s_status_str. Fix this by adding in
the missing entry.

Addresses-Coverity: ("Out-of-bounds read").
Fixes: 2d22bc8354b1 ("qed: FW 8.42.2.0 debug features")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-phy-call-phy_disable_interrupts-in-phy_init_hw'

Jisheng Zhang says:

====================
net: phy: call phy_disable_interrupts() in phy_init_hw()

We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

patch1 makes phy_disable_interrupts() non-static so that it could be used
in phy_init_hw() to have a defined init state.

patch2 calls phy_disable_interrupts() in phy_init_hw() to have a
defined init state.

Since v3:
  - call phy_disable_interrupts() have interrupts disabled first then
    config_init, thank Florian

Since v2:
  - Don't export phy_disable_interrupts() but just make it non-static

Since v1:
  - EXPORT the correct symbol
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: call phy_disable_interrupts() in phy_init_hw()

Call phy_disable_interrupts() in phy_init_hw() to "have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state." as pointed
out by Heiner.

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: make phy_disable_interrupts() non-static

We face an issue with rtl8211f, a pin is shared between INTB and PMEB,
and the PHY Register Accessible Interrupt is enabled by default, so
the INTB/PMEB pin is always active in polling mode case.

As Heiner pointed out "I was thinking about calling
phy_disable_interrupts() in phy_init_hw(), to have a defined init
state as we don't know in which state the PHY is if the PHY driver is
loaded. We shouldn't assume that it's the chip power-on defaults, BIOS
or boot loader could have changed this. Or in case of dual-boot
systems the other OS could leave the PHY in whatever state."

Make phy_disable_interrupts() non-static so that it could be used in
phy_init_hw() to have a defined init state.

Suggested-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mvneta: Add back interface mode validation

When writing the serdes configuration register was moved to
mvneta_config_interface() the whole code block was removed from
mvneta_port_power_up() in the assumption that its only purpose was to
write the serdes configuration register. As mentioned by Russell King
its purpose was also to check for valid interface modes early so that
later in the driver we do not have to care for unexpected interface
modes.
Add back the test to let the driver bail out early on unhandled
interface modes.

Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ethernet: mvneta: Do not error out in non serdes modes

In mvneta_config_interface() the RGMII modes are catched by the default
case which is an error return. The RGMII modes are valid modes for the
driver, so instead of returning an error add a break statement to return
successfully.

This avoids this warning for non comphy SoCs which use RGMII, like
SolidRun Clearfog:

WARNING: CPU: 0 PID: 268 at drivers/net/ethernet/marvell/mvneta.c:3512 mvneta_start_dev+0x220/0x23c

Fixes: b4748553f53f ("net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphy")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

dsa: Allow forwarding of redirected IGMP traffic

The driver for Marvell switches puts all ports in IGMP snooping mode
which results in all IGMP/MLD frames that ingress on the ports to be
forwarded to the CPU only.

The bridge code in the kernel can then interpret these frames and act
upon them, for instance by updating the mdb in the switch to reflect
multicast memberships of stations connected to the ports. However,
the IGMP/MLD frames must then also be forwarded to other ports of the
bridge so external IGMP queriers can track membership reports, and
external multicast clients can receive query reports from foreign IGMP
queriers.

Currently, this is impossible as the EDSA tagger sets offload_fwd_mark
on the skb when it unwraps the tagged frames, and that will make the
switchdev layer prevent the skb from egressing on any other port of
the same switch.

To fix that, look at the To_CPU code in the DSA header and make
forwarding of the frame possible for trapped IGMP packets.

Introduce some #defines for the frame types to make the code a bit more
comprehensive.

This was tested on a Marvell 88E6352 variant.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

openvswitch: take into account de-fragmentation/gso_size in execute_check_pkt_len

ovs connection tracking module performs de-fragmentation on incoming
fragmented traffic. Take info account if traffic has been de-fragmented
in execute_check_pkt_len action otherwise we will perform the wrong
nested action considering the original packet size. This issue typically
occurs if ovs-vswitchd adds a rule in the pipeline that requires connection
tracking (e.g. OVN stateful ACLs) before execute_check_pkt_len action.
Moreover take into account GSO fragment size for GSO packet in
execute_check_pkt_len routine

Fixes: 4d5ec89fc8d14 ("net: openvswitch: Add a new action check_pkt_len")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place.

  This includes a couple of tests that I would normally defer, but since
  they have already been helpful in catching some bugs, don't build for
  any users at all, and having them upstream makes life easier for
  everyone, I think it's ok even at this late stage"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  tools/virtio: Use tools/include/list.h instead of stubs
  tools/virtio: Reset index in virtio_test --reset.
  tools/virtio: Extract virtqueue initialization in vq_reset
  tools/virtio: Use __vring_new_virtqueue in virtio_test.c
  tools/virtio: Add --reset
  tools/virtio: Add --batch=random option
  tools/virtio: Add --batch option
  virtio-mem: add memory via add_memory_driver_managed()
  virtio-mem: silence a static checker warning
  vhost_vdpa: Fix potential underflow in vhost_vdpa_mmap()
  vdpa: fix typos in the comments for __vdpa_alloc_device()

Merge tag 'for-linus-2020-06-24' of git://git./linux/kernel/git/brauner/linux

Pull thread fix from Christian Brauner:
"This fixes a regression introduced with 303cc571d107 ("nsproxy: attach
  to namespaces via pidfds").

  The LTP testsuite reported a regression where users would now see
  EBADF returned instead of EINVAL when an fd was passed that referred
  to an open file but the file was not a namespace file.

  Fix this by continuing to report EINVAL and add a regression test"

* tag 'for-linus-2020-06-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  tests: test for setns() EINVAL regression
  nsproxy: restore EINVAL for non-namespace file descriptor

drm/fb-helper: Fix vt restore

In the past we had a pile of hacks to orchestrate access between fbdev
emulation and native kms clients. We've tried to streamline this, by
always preferring the kms side above fbdev calls when a drm master
exists, because drm master controls access to the display resources.

Unfortunately this breaks existing userspace, specifically Xorg. When
exiting Xorg first restores the console to text mode using the KDSET
ioctl on the vt. This does nothing, because a drm master is still
around. Then it drops the drm master status, which again does nothing,
because logind is keeping additional drm fd open to be able to
orchestrate vt switches. In the past this is the point where fbdev was
restored, as part of the ->lastclose hook on the drm side.

Now to fix this regression we don't want to go back to letting fbdev
restore things whenever it feels like, or to the pile of hacks we've
had before. Instead try and go with a minimal exception to make the
KDSET case work again, and nothing else.

This means that if userspace does a KDSET call when switching between
graphical compositors, there will be some flickering with fbcon
showing up for a bit. But a) that's not a regression and b) userspace
can fix it by improving the vt switching dance - logind should have
all the information it needs.

While pondering all this I'm also wondering wheter we should have a
SWITCH_MASTER ioctl to allow race-free master status handover. But
that's for another day.

v2: Somehow forgot to cc all the fbdev people.

v3: Fix typo Alex spotted.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208179
Cc: shlomo@fastmail.com
Reported-and-Tested-by: shlomo@fastmail.com
Cc: Michel Dänzer <michel@daenzer.net>
Fixes: 64914da24ea9 ("drm/fbdev-helper: don't force restores")
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.7+
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Qiujun Huang <hqjagain@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200624092910.3280448-1-daniel.vetter@ffwll.ch

IB/hfi1: Add atomic triggered sleep/wakeup

When running iperf in a two host configuration the following trace can
occur:

[  319.728730] NETDEV WATCHDOG: ib0 (hfi1): transmit queue 0 timed out

The issue happens because the current implementation relies on the netif
txq being stopped to control the flushing of the tx list.

There are two resources that the transmit logic can wait on and stop the
txq:
- SDMA descriptors
- Ring space to hold completions

The ring space is tested on the sending side and relieved when the ring is
consumed in the napi tx reaping.

Unfortunately, that reaping can run conncurrently with the workqueue
flushing of the txlist.  If the txq is started just before the workitem
executes, the txlist will never be flushed, leading to the txq being
stuck.

Fix by:
- Adding sleep/wakeup wrappers
  * Use an atomic to control the call to the netif routines inside the
    wrappers

- Use another atomic to record ring space exhaustion
  * Only wakeup when the a ring space exhaustion has happened and it
    relieved

Add additional wrappers to clarify the ring space resource handling.

Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204327.108092.4024.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

IB/hfi1: Correct -EBUSY handling in tx code

The current code mishandles -EBUSY in two ways:
- The flow change doesn't test the return from the flush and runs on to
  process the current packet racing with the wakeup processing
- The -EBUSY handling for a single packet inserts the tx into the txlist
  after the submit call, racing with the same wakeup processing

Fix the first by dropping the skb and returning NETDEV_TX_OK.

Fix the second by insuring the the list entry within the txreq is inited
when allocated.  This enables the sleep routine to detect that the txreq
has used the non-list api and queue the packet to the txlist.

Both flaws can lead to having the flushing thread executing in causing two
threads to manipulate the txlist.

Fixes: d99dc602e2a5 ("IB/hfi1: Add functions to transmit datagram ipoib packets")
Link: https://lore.kernel.org/r/20200623204321.108092.83898.stgit@awfm-01.aw.intel.com
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>