Sylwester Nawrocki [Fri, 25 Nov 2011 23:37:23 +0000 (20:37 -0300)]
[media] m5mols: Simplify the I2C registers definition
The redundant definitions of the m5mols I2C register addresses within
the pages (categories) are removed. In place of symbolic definitions
plain numbers are used which simplifies the code and eases identifying
the registers in the documentation.
Also make the m5mols_busy() function accept I2C_REG() value as a register
address, like all other functions, rather than using the category and
command values.
Acked-by: HeungJun Kim <riverful.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Thu, 1 Dec 2011 17:02:24 +0000 (14:02 -0300)]
[media] s5p-fimc: Add support for alpha component configuration
On Exynos SoCs the FIMC IP allows to configure globally the alpha
component of all pixels for V4L2_PIX_FMT_RGB32, V4L2_PIX_FMT_RGB555
and V4L2_PIX_FMT_RGB444 image formats. This patch adds a v4l2 control
in order to let the applications control the alpha component value.
The alpha value range depends on the pixel format, for RGB32 it's
0..255 (8-bits), for RGB555 - 0..1 (1-bit) and for RGB444 - 0..15
(4-bits). The v4l2 control range is always 0..255 and the alpha
component data width is determined by currently set format on the
V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE buffer queue. The applications
need to match the alpha channel value range and the pixel format
since the driver will clamp the alpha component. Depending on
fourcc the valid alpha bits are:
- V4L2_PIX_FMT_RGB555 [0]
- V4L2_PIX_FMT_RGB444 [3:0]
- V4L2_PIX_FMT_RGB32 [7:0]
When switching to a pixel format with smaller alpha component width
the currently set alpha value will be clamped to maximum value valid
for current format. When switching to a format with wider alpha the
alpha value remains unchanged.
The variant description data structure is extended with a new entry
so an additional control is created only where really supported by
the hardware.
V4L2_PIX_FMT_RGB555 and V4L2_PIX_FMT_RGB444 formats are only valid
for V4L2_BUF_TYPE_VIDEO_CAPTURE buffer queue.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Sylwester Nawrocki [Mon, 14 Nov 2011 11:48:18 +0000 (08:48 -0300)]
[media] v4l: Add new alpha component control
The V4L2_CID_ALPHA_COMPONENT control is intended for the video capture
or memory-to-memory devices that are capable of setting up the per-pixel
alpha component to some arbitrary value. It allows to set the alpha
component for all pixels to an arbitrary value.
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Fri, 30 Dec 2011 15:59:37 +0000 (13:59 -0200)]
Merge tag 'v3.2-rc7' into staging/for_v3.3
Linux 3.2-rc7
* tag 'v3.2-rc7': (1304 commits)
Linux 3.2-rc7
netfilter: xt_connbytes: handle negation correctly
Btrfs: call d_instantiate after all ops are setup
Btrfs: fix worker lock misuse in find_worker
net: relax rcvbuf limits
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
net: introduce DST_NOPEER dst flag
mqprio: Avoid panic if no options are provided
bridge: provide a mtu() method for fake_dst_ops
md/bitmap: It is OK to clear bits during recovery.
md: don't give up looking for spares on first failure-to-add
md/raid5: ensure correct assessment of drives during degraded reshape.
md/linear: fix hot-add of devices to linear arrays.
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
ipv4: using prefetch requires including prefetch.h
VFS: Fix race between CPU hotplug and lglocks
vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
USB: Fix usb/isp1760 build on sparc
net: Add a flow_cache_flush_deferred function
...
Conflicts:
drivers/media/common/tuners/tda18218.c
drivers/media/video/omap3isp/ispccdc.c
drivers/staging/media/as102/as102_drv.h
Linus Torvalds [Sat, 24 Dec 2011 05:51:06 +0000 (21:51 -0800)]
Linux 3.2-rc7
Linus Torvalds [Sat, 24 Dec 2011 05:47:28 +0000 (21:47 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
VFS: Fix race between CPU hotplug and lglocks
Linus Torvalds [Sat, 24 Dec 2011 04:25:36 +0000 (20:25 -0800)]
Merge tag 'writeback' of git://git./linux/kernel/git/wfg/linux
for linus: writeback reason binary tracing format fix
* tag 'writeback' of git://git.kernel.org/pub/scm/linux/kernel/git/wfg/linux:
writeback: show writeback reason with __print_symbolic
Linus Torvalds [Fri, 23 Dec 2011 23:01:24 +0000 (15:01 -0800)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: adapt update-po-config to new UML layout
Linus Torvalds [Fri, 23 Dec 2011 22:59:08 +0000 (14:59 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] omap3isp: Fix crash caused by subdevs now having a pointer to devnodes
Linus Torvalds [Fri, 23 Dec 2011 22:58:39 +0000 (14:58 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/mason/linux-btrfs
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: call d_instantiate after all ops are setup
Btrfs: fix worker lock misuse in find_worker
Linus Torvalds [Fri, 23 Dec 2011 22:58:14 +0000 (14:58 -0800)]
Merge git://git./linux/kernel/git/davem/sparc
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
Linus Torvalds [Fri, 23 Dec 2011 22:57:55 +0000 (14:57 -0800)]
Merge git://git./linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
netfilter: xt_connbytes: handle negation correctly
net: relax rcvbuf limits
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
net: introduce DST_NOPEER dst flag
mqprio: Avoid panic if no options are provided
bridge: provide a mtu() method for fake_dst_ops
David S. Miller [Fri, 23 Dec 2011 19:29:20 +0000 (14:29 -0500)]
Merge branch 'nf' of git://1984.lsi.us.es/net
Florian Westphal [Fri, 16 Dec 2011 17:35:15 +0000 (18:35 +0100)]
netfilter: xt_connbytes: handle negation correctly
"! --connbytes 23:42" should match if the packet/byte count is not in range.
As there is no explict "invert match" toggle in the match structure,
userspace swaps the from and to arguments
(i.e., as if "--connbytes 42:23" were given).
However, "what <= 23 && what >= 42" will always be false.
Change things so we use "||" in case "from" is larger than "to".
This change may look like it breaks backwards compatibility when "to" is 0.
However, older iptables binaries will refuse "connbytes 42:0",
and current releases treat it to mean "! --connbytes 0:42",
so we should be fine.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Al Viro [Fri, 23 Dec 2011 12:58:13 +0000 (07:58 -0500)]
Btrfs: call d_instantiate after all ops are setup
This closes races where btrfs is calling d_instantiate too soon during
inode creation. All of the callers of btrfs_add_nondir are updated to
instantiate after the inode is fully setup in memory.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Chris Mason [Fri, 23 Dec 2011 12:53:00 +0000 (07:53 -0500)]
Btrfs: fix worker lock misuse in find_worker
Dan Carpenter noticed that we were doing a double unlock on the worker
lock, and sometimes picking a worker thread without the lock held.
This fixes both errors.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Eric Dumazet [Wed, 21 Dec 2011 07:11:44 +0000 (07:11 +0000)]
net: relax rcvbuf limits
skb->truesize might be big even for a small packet.
Its even bigger after commit
87fb4b7b533 (net: more accurate skb
truesize) and big MTU.
We should allow queueing at least one packet per receiver, even with a
low RCVBUF setting.
Reported-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xi Wang [Thu, 22 Dec 2011 13:35:22 +0000 (13:35 +0000)]
rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt()
Setting a large rps_flow_cnt like (1 << 30) on 32-bit platform will
cause a kernel oops due to insufficient bounds checking.
if (count > 1<<30) {
/* Enforce a limit to prevent overflow */
return -EINVAL;
}
count = roundup_pow_of_two(count);
table = vmalloc(RPS_DEV_FLOW_TABLE_SIZE(count));
Note that the macro RPS_DEV_FLOW_TABLE_SIZE(count) is defined as:
... + (count * sizeof(struct rps_dev_flow))
where sizeof(struct rps_dev_flow) is 8. (1 << 30) * 8 will overflow
32 bits.
This patch replaces the magic number (1 << 30) with a symbolic bound.
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 22 Dec 2011 04:15:53 +0000 (04:15 +0000)]
net: introduce DST_NOPEER dst flag
Chris Boot reported crashes occurring in ipv6_select_ident().
[ 461.457562] RIP: 0010:[<
ffffffff812dde61>] [<
ffffffff812dde61>]
ipv6_select_ident+0x31/0xa7
[ 461.578229] Call Trace:
[ 461.580742] <IRQ>
[ 461.582870] [<
ffffffff812efa7f>] ? udp6_ufo_fragment+0x124/0x1a2
[ 461.589054] [<
ffffffff812dbfe0>] ? ipv6_gso_segment+0xc0/0x155
[ 461.595140] [<
ffffffff812700c6>] ? skb_gso_segment+0x208/0x28b
[ 461.601198] [<
ffffffffa03f236b>] ? ipv6_confirm+0x146/0x15e
[nf_conntrack_ipv6]
[ 461.608786] [<
ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[ 461.614227] [<
ffffffff81271d64>] ? dev_hard_start_xmit+0x357/0x543
[ 461.620659] [<
ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[ 461.626440] [<
ffffffffa0379745>] ? br_parse_ip_options+0x19a/0x19a
[bridge]
[ 461.633581] [<
ffffffff812722ff>] ? dev_queue_xmit+0x3af/0x459
[ 461.639577] [<
ffffffffa03747d2>] ? br_dev_queue_push_xmit+0x72/0x76
[bridge]
[ 461.646887] [<
ffffffffa03791e3>] ? br_nf_post_routing+0x17d/0x18f
[bridge]
[ 461.653997] [<
ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[ 461.659473] [<
ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[ 461.665485] [<
ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[ 461.671234] [<
ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[ 461.677299] [<
ffffffffa0379215>] ?
nf_bridge_update_protocol+0x20/0x20 [bridge]
[ 461.684891] [<
ffffffffa03bb0e5>] ? nf_ct_zone+0xa/0x17 [nf_conntrack]
[ 461.691520] [<
ffffffffa0374760>] ? br_flood+0xfa/0xfa [bridge]
[ 461.697572] [<
ffffffffa0374812>] ? NF_HOOK.constprop.8+0x3c/0x56
[bridge]
[ 461.704616] [<
ffffffffa0379031>] ?
nf_bridge_push_encap_header+0x1c/0x26 [bridge]
[ 461.712329] [<
ffffffffa037929f>] ? br_nf_forward_finish+0x8a/0x95
[bridge]
[ 461.719490] [<
ffffffffa037900a>] ?
nf_bridge_pull_encap_header+0x1c/0x27 [bridge]
[ 461.727223] [<
ffffffffa0379974>] ? br_nf_forward_ip+0x1c0/0x1d4 [bridge]
[ 461.734292] [<
ffffffff81291c4d>] ? nf_iterate+0x41/0x77
[ 461.739758] [<
ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[ 461.746203] [<
ffffffff81291cf6>] ? nf_hook_slow+0x73/0x111
[ 461.751950] [<
ffffffffa03748cc>] ? __br_deliver+0xa0/0xa0 [bridge]
[ 461.758378] [<
ffffffffa037533a>] ? NF_HOOK.constprop.4+0x56/0x56
[bridge]
This is caused by bridge netfilter special dst_entry (fake_rtable), a
special shared entry, where attaching an inetpeer makes no sense.
Problem is present since commit
87c48fa3b46 (ipv6: make fragment
identifications less predictable)
Introduce DST_NOPEER dst flag and make sure ipv6_select_ident() and
__ip_select_ident() fallback to the 'no peer attached' handling.
Reported-by: Chris Boot <bootc@bootc.net>
Tested-by: Chris Boot <bootc@bootc.net>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Thu, 22 Dec 2011 02:05:07 +0000 (02:05 +0000)]
mqprio: Avoid panic if no options are provided
Userspace may not provide TCA_OPTIONS, in fact tc currently does
so not do so if no arguments are specified on the command line.
Return EINVAL instead of panicing.
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Dec 2011 20:00:32 +0000 (20:00 +0000)]
bridge: provide a mtu() method for fake_dst_ops
Commit
618f9bc74a039da76 (net: Move mtu handling down to the protocol
depended handlers) forgot the bridge netfilter case, adding a NULL
dereference in ip_fragment().
Reported-by: Chris Boot <bootc@bootc.net>
CC: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Dec 2011 23:36:17 +0000 (15:36 -0800)]
Merge branch 'for-linus' of git://neil.brown.name/md
* 'for-linus' of git://neil.brown.name/md:
md/bitmap: It is OK to clear bits during recovery.
md: don't give up looking for spares on first failure-to-add
md/raid5: ensure correct assessment of drives during degraded reshape.
md/linear: fix hot-add of devices to linear arrays.
NeilBrown [Thu, 22 Dec 2011 22:57:48 +0000 (09:57 +1100)]
md/bitmap: It is OK to clear bits during recovery.
commit
d0a4bb492772ce5c4bdfba3744a99ed6f6fb238f introduced a
regression which is annoying but fairly harmless.
When writing to an array that is undergoing recovery (a spare
in being integrated into the array), writing to the array will
set bits in the bitmap, but they will not be cleared when the
write completes.
For bits covering areas that have not been recovered yet this is not a
problem as the recovery will clear the bits. However bits set in
already-recovered region will stay set and never be cleared.
This doesn't risk data integrity. The only negatives are:
- next time there is a crash, more resyncing than necessary will
be done.
- the bitmap doesn't look clean, which is confusing.
While an array is recovering we don't want to update the
'events_cleared' setting in the bitmap but we do still want to clear
bits that have very recently been set - providing they were written to
the recovering device.
So split those two needs - which previously both depended on 'success'
and always clear the bit of the write went to all devices.
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Thu, 22 Dec 2011 22:57:19 +0000 (09:57 +1100)]
md: don't give up looking for spares on first failure-to-add
Before performing a recovery we try to remove any spares that
might not be working, then add any that might have become relevant.
Currently we abort on the first spare that cannot be added.
This is a false optimisation.
It is conceivable that - depending on rules in the personality - a
subsequent spare might be accepted.
Also the loop does other things like count the available spares and
reset the 'recovery_offset' value.
If we abort early these might not happen properly.
So remove the early abort.
In particular if you have an array what is undergoing recovery and
which has extra spares, then the recovery may not restart after as
reboot as the could of 'spares' might end up as zero.
Reported-by: Anssi Hannula <anssi.hannula@iki.fi>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Thu, 22 Dec 2011 22:57:00 +0000 (09:57 +1100)]
md/raid5: ensure correct assessment of drives during degraded reshape.
While reshaping a degraded array (as when reshaping a RAID0 by first
converting it to a degraded RAID4) we currently get confused about
which devices are in_sync. In most cases we get it right, but in the
region that is being reshaped we need to treat non-failed devices as
in-sync when we have the data but haven't actually written it out yet.
Reported-by: Adam Kwolek <adam.kwolek@intel.com>
Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Thu, 22 Dec 2011 22:56:55 +0000 (09:56 +1100)]
md/linear: fix hot-add of devices to linear arrays.
commit
d70ed2e4fafdbef0800e73942482bb075c21578b
broke hot-add to a linear array.
After that commit, metadata if not written to devices until they
have been fully integrated into the array as determined by
saved_raid_disk. That patch arranged to clear that field after
a recovery completed.
However for linear arrays, there is no recovery - the integration is
instantaneous. So we need to explicitly clear the saved_raid_disk
field.
Signed-off-by: NeilBrown <neilb@suse.de>
David S. Miller [Thu, 22 Dec 2011 21:23:59 +0000 (13:23 -0800)]
sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq().
This silently was working for many years and stopped working on
Niagara-T3 machines.
We need to set the MSIQ to VALID before we can set it's state to IDLE.
On Niagara-T3, setting the state to IDLE first was causing HV_EINVAL
errors. The hypervisor documentation says, rather ambiguously, that
the MSIQ must be "initialized" before one can set the state.
I previously understood this to mean merely that a successful setconf()
operation has been performed on the MSIQ, which we have done at this
point. But it seems to also mean that it has been set VALID too.
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 22 Dec 2011 20:59:47 +0000 (12:59 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb
* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Fix usb/isp1760 build on sparc
usb: gadget: epautoconf: do not change number of streams
usb: dwc3: core: fix cached revision on our structure
usb: musb: fix reset issue with full speed device
Linus Torvalds [Thu, 22 Dec 2011 20:53:32 +0000 (12:53 -0800)]
Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-dev
* 'upstream-linus' of git://github.com/jgarzik/libata-dev:
pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
David Miller [Wed, 21 Dec 2011 22:38:10 +0000 (17:38 -0500)]
pata_of_platform: Add missing CONFIG_OF_IRQ dependency.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Stephen Rothwell [Thu, 22 Dec 2011 06:03:29 +0000 (17:03 +1100)]
ipv4: using prefetch requires including prefetch.h
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: David Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Srivatsa S. Bhat [Wed, 21 Dec 2011 21:15:29 +0000 (02:45 +0530)]
VFS: Fix race between CPU hotplug and lglocks
Currently, the *_global_[un]lock_online() routines are not at all synchronized
with CPU hotplug. Soft-lockups detected as a consequence of this race was
reported earlier at https://lkml.org/lkml/2011/8/24/185. (Thanks to Cong Meng
for finding out that the root-cause of this issue is the race condition
between br_write_[un]lock() and CPU hotplug, which results in the lock states
getting messed up).
Fixing this race by just adding {get,put}_online_cpus() at appropriate places
in *_global_[un]lock_online() is not a good option, because, then suddenly
br_write_[un]lock() would become blocking, whereas they have been kept as
non-blocking all this time, and we would want to keep them that way.
So, overall, we want to ensure 3 things:
1. br_write_lock() and br_write_unlock() must remain as non-blocking.
2. The corresponding lock and unlock of the per-cpu spinlocks must not happen
for different sets of CPUs.
3. Either prevent any new CPU online operation in between this lock-unlock, or
ensure that the newly onlined CPU does not proceed with its corresponding
per-cpu spinlock unlocked.
To achieve all this:
(a) We introduce a new spinlock that is taken by the *_global_lock_online()
routine and released by the *_global_unlock_online() routine.
(b) We register a callback for CPU hotplug notifications, and this callback
takes the same spinlock as above.
(c) We maintain a bitmap which is close to the cpu_online_mask, and once it is
initialized in the lock_init() code, all future updates to it are done in
the callback, under the above spinlock.
(d) The above bitmap is used (instead of cpu_online_mask) while locking and
unlocking the per-cpu locks.
The callback takes the spinlock upon the CPU_UP_PREPARE event. So, if the
br_write_lock-unlock sequence is in progress, the callback keeps spinning,
thus preventing the CPU online operation till the lock-unlock sequence is
complete. This takes care of requirement (3).
The bitmap that we maintain remains unmodified throughout the lock-unlock
sequence, since all updates to it are managed by the callback, which takes
the same spinlock as the one taken by the lock code and released only by the
unlock routine. Combining this with (d) above, satisfies requirement (2).
Overall, since we use a spinlock (mentioned in (a)) to prevent CPU hotplug
operations from racing with br_write_lock-unlock, requirement (1) is also
taken care of.
By the way, it is to be noted that a CPU offline operation can actually run
in parallel with our lock-unlock sequence, because our callback doesn't react
to notifications earlier than CPU_DEAD (in order to maintain our bitmap
properly). And this means, since we use our own bitmap (which is stale, on
purpose) during the lock-unlock sequence, we could end up unlocking the
per-cpu lock of an offline CPU (because we had locked it earlier, when the
CPU was online), in order to satisfy requirement (2). But this is harmless,
though it looks a bit awkward.
Debugged-by: Cong Meng <mc@linux.vnet.ibm.com>
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org
Linus Torvalds [Thu, 22 Dec 2011 02:29:26 +0000 (18:29 -0800)]
Merge git://git./linux/kernel/git/davem/net
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
net: Add a flow_cache_flush_deferred function
ipv4: reintroduce route cache garbage collector
net: have ipconfig not wait if no dev is available
sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd
asix: new device id
davinci-cpdma: fix locking issue in cpdma_chan_stop
sctp: fix incorrect overflow check on autoclose
r8169: fix Config2 MSIEnable bit setting.
llc: llc_cmsg_rcv was getting called after sk_eat_skb.
net: bpf_jit: fix an off-one bug in x86_64 cond jump target
iwlwifi: update SCD BC table for all SCD queues
Revert "Bluetooth: Revert: Fix L2CAP connection establishment"
Bluetooth: Clear RFCOMM session timer when disconnecting last channel
Bluetooth: Prevent uninitialized data access in L2CAP configuration
iwlwifi: allow to switch to HT40 if not associated
iwlwifi: tx_sync only on PAN context
mwifiex: avoid double list_del in command cancel path
ath9k: fix max phy rate at rate control init
nfc: signedness bug in __nci_request()
iwlwifi: do not set the sequence control bit is not needed
Linus Torvalds [Thu, 22 Dec 2011 02:29:05 +0000 (18:29 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/tiwai/sound
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: atmel/ac97c: using software reset instead hardware reset if not available
Linus Torvalds [Thu, 22 Dec 2011 02:28:52 +0000 (18:28 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sameo/mfd-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
mfd: Include linux/io.h to jz4740-adc
mfd: Use request_threaded_irq for twl4030-irq instead of irq_set_chained_handler
mfd: Base interrupt for twl4030-irq must be one-shot
mfd: Handle tps65910 clear-mask correctly
mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources
mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver
mfd: include linux/module.h for ab5500-debugfs
mfd: Update wm8994 active device checks for WM1811
mfd: Set tps6586x bits if new value is different from the old one
mfd: Set da903x bits if new value is different from the old one
mfd: Set adp5520 bits if new value is different from the old one
mfd: Add missed free_irq in da903x_remove
Dave Kleikamp [Wed, 21 Dec 2011 17:05:48 +0000 (11:05 -0600)]
vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL
lockdep reports a deadlock in jfs because a special inode's rw semaphore
is taken recursively. The mapping's gfp mask is GFP_NOFS, but is not
used when __read_cache_page() calls add_to_page_cache_lru().
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Greg Kroah-Hartman [Wed, 21 Dec 2011 22:42:17 +0000 (14:42 -0800)]
Merge branch 'for-greg' of git://git./linux/kernel/git/balbi/usb into usb-linus
* 'for-greg' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb:
usb: gadget: epautoconf: do not change number of streams
usb: dwc3: core: fix cached revision on our structure
usb: musb: fix reset issue with full speed device
David Miller [Wed, 21 Dec 2011 22:31:54 +0000 (17:31 -0500)]
USB: Fix usb/isp1760 build on sparc
This commit:
commit
8f5d621543cb064d2989fc223d3c2bc61a43981e
Author: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Date: Mon Oct 10 18:06:54 2011 +0200
usb/isp1760: Let OF bindings depend on general CONFIG_OF instead of PPC_OF .
To be able to use the driver on other OF-aware architectures, too.
And add necessary OF related #includes to fix compilation error.
Signed-off-by: Joachim Foerster <joachim.foerster@missinglinkelectronics.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
enabled the build on all CONFIG_OF architectures, but it cannot do
this.
This driver depends upon CONFIG_OF_IRQ but not all CONFIG_OF platforms
support that infrastructure, in particular Sparc does not so the
build fails.
Please push a patch like the following to Linus so that this code only
gets built where it actually should.
--------------------
usb/isp1760: Add missing CONFIG_OF_IRQ dependency on OF code.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Steffen Klassert [Wed, 21 Dec 2011 21:48:08 +0000 (16:48 -0500)]
net: Add a flow_cache_flush_deferred function
flow_cach_flush() might sleep but can be called from
atomic context via the xfrm garbage collector. So add
a flow_cache_flush_deferred() function and use this if
the xfrm garbage colector is invoked from within the
packet path.
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Wed, 21 Dec 2011 20:47:16 +0000 (15:47 -0500)]
ipv4: reintroduce route cache garbage collector
Commit
2c8cec5c10b (ipv4: Cache learned PMTU information in inetpeer)
removed IP route cache garbage collector a bit too soon, as this gc was
responsible for expired routes cleanup, releasing their neighbour
reference.
As pointed out by Robert Gladewitz, recent kernels can fill and exhaust
their neighbour cache.
Reintroduce the garbage collection, since we'll have to wait our
neighbour lookups become refcount-less to not depend on this stuff.
Reported-by: Robert Gladewitz <gladewitz@gmx.de>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville [Wed, 21 Dec 2011 18:18:22 +0000 (13:18 -0500)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem
Ben Hutchings [Wed, 21 Dec 2011 03:54:24 +0000 (03:54 +0000)]
firmware: Refer to the co-maintained linux-firmware.git repository
David and I are sharing maintenance of this repository. Patches
should be sent to both of us.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 21 Dec 2011 02:39:37 +0000 (18:39 -0800)]
Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
mtd: plat_ram: call mtd_device_register only if partition data exists
mtd: pxa2xx-flash.c: It used to fall back to provided table.
mtd: gpmi: add missing include 'module.h'
mtd: ndfc: fix typo in structure dereference
Linus Torvalds [Wed, 21 Dec 2011 02:31:34 +0000 (18:31 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cjb/mmc
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc:
mmc: vub300: fix type of firmware_rom_wait_states module parameter
Revert "mmc: enable runtime PM by default"
mmc: sdhci: remove "state" argument from sdhci_suspend_host
David Howells [Tue, 13 Dec 2011 14:49:04 +0000 (14:49 +0000)]
SELinux: Fix RCU deref check warning in sel_netport_insert()
Fix the following bug in sel_netport_insert() where rcu_dereference() should
be rcu_dereference_protected() as sel_netport_lock is held.
===================================================
[ INFO: suspicious rcu_dereference_check() usage. ]
---------------------------------------------------
security/selinux/netport.c:127 invoked rcu_dereference_check() without protection!
other info that might help us debug this:
rcu_scheduler_active = 1, debug_locks = 0
1 lock held by ossec-rootcheck/3323:
#0: (sel_netport_lock){+.....}, at: [<
ffffffff8117d775>] sel_netport_sid+0xbb/0x226
stack backtrace:
Pid: 3323, comm: ossec-rootcheck Not tainted 3.1.0-rc8-fsdevel+ #1095
Call Trace:
[<
ffffffff8105cfb7>] lockdep_rcu_dereference+0xa7/0xb0
[<
ffffffff8117d871>] sel_netport_sid+0x1b7/0x226
[<
ffffffff8117d6ba>] ? sel_netport_avc_callback+0xbc/0xbc
[<
ffffffff8117556c>] selinux_socket_bind+0x115/0x230
[<
ffffffff810a5388>] ? might_fault+0x4e/0x9e
[<
ffffffff810a53d1>] ? might_fault+0x97/0x9e
[<
ffffffff81171cf4>] security_socket_bind+0x11/0x13
[<
ffffffff812ba967>] sys_bind+0x56/0x95
[<
ffffffff81380dac>] ? sysret_check+0x27/0x62
[<
ffffffff8105b767>] ? trace_hardirqs_on_caller+0x11e/0x155
[<
ffffffff81076fcd>] ? audit_syscall_entry+0x17b/0x1ae
[<
ffffffff811b5eae>] ? trace_hardirqs_on_thunk+0x3a/0x3f
[<
ffffffff81380d7b>] system_call_fastpath+0x16/0x1b
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@kernel.org
Signed-off-by: James Morris <jmorris@namei.org>
James Morris [Wed, 21 Dec 2011 00:28:16 +0000 (11:28 +1100)]
Merge branch 'evm-fixes' of git://git./linux/kernel/git/kasatkin/linux-digsig into for-linus
Linus Torvalds [Tue, 20 Dec 2011 19:44:18 +0000 (11:44 -0800)]
Merge branch 'for-3.2-fixes' of git://git./linux/kernel/git/tj/cgroup
* 'for-3.2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroups: fix a css_set not found bug in cgroup_attach_proc
Linus Torvalds [Tue, 20 Dec 2011 19:43:08 +0000 (11:43 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, dumpstack: Fix code bytes breakage due to missing KERN_CONT
Linus Torvalds [Tue, 20 Dec 2011 19:42:38 +0000 (11:42 -0800)]
Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
time/clocksource: Fix kernel-doc warnings
rtc: m41t80: Workaround broken alarm functionality
rtc: Expire alarms after the time is set.
Linus Torvalds [Tue, 20 Dec 2011 19:41:17 +0000 (11:41 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
oprofile: Fix uninitialized memory access when writing to writing to oprofilefs
Linus Torvalds [Tue, 20 Dec 2011 19:40:48 +0000 (11:40 -0800)]
Merge branch 'stable/for-linus-fixes-3.2' of git://git./linux/kernel/git/konrad/xen
* 'stable/for-linus-fixes-3.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
Revert "xen/pv-on-hvm kexec: add xs_reset_watches to shutdown watches from old kernel"
Linus Torvalds [Tue, 20 Dec 2011 19:39:21 +0000 (11:39 -0800)]
Merge branch 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh
* 'sh-fixes-for-linus' of git://github.com/pmundt/linux-sh:
sh: fix build warning in board-sh7757lcr
Linus Torvalds [Tue, 20 Dec 2011 19:32:18 +0000 (11:32 -0800)]
Merge branch 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh
* 'rmobile-fixes-for-linus' of git://github.com/pmundt/linux-sh:
ARM: mach-shmobile: SH73A0 external Ethernet fix
ARM: mach-shmobile: AG5EVM GIC Sparse IRQ fix
ARM: mach-shmobile: Kota2 TPU LED platform data
ARM: mach-shmobile: Kota2 GIC Sparse IRQ fix
ARM: mach-shmobile: Kota2 PINT fix
Linus Torvalds [Tue, 20 Dec 2011 19:31:56 +0000 (11:31 -0800)]
Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
NFS: Fix a regression in nfs_file_llseek()
NFSv4: Do not accept delegated opens when a delegation recall is in effect
NFSv4: Ensure correct locking when accessing the 'lock_states' list
NFSv4.1: Ensure that we handle _all_ SEQUENCE status bits.
NFSv4: Don't error if we handled it in nfs4_recovery_handle_error
SUNRPC: Ensure we always bump the backlog queue in xprt_free_slot
SUNRPC: Fix the execution time statistics in the face of RPC restarts
Linus Torvalds [Tue, 20 Dec 2011 19:31:44 +0000 (11:31 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
vmwgfx: Clip cliprects against screen boundaries in present and dirty
vmwgfx: Resend the cursor after legacy modeset
vmwgfx: Do better culling of presents
vmwgfx: Refactor kms code to use vmw_user_lookup_handle helper
vmwgfx: Add helper function to get surface or dmabuf
vmwgfx: Refactor cursor update
vmwgfx: Remove dmabuf check in present ioctl
vmwgfx: Use the revised fifo hw version register when present
Gerlando Falauto [Mon, 19 Dec 2011 22:58:04 +0000 (22:58 +0000)]
net: have ipconfig not wait if no dev is available
previous commit
3fb72f1e6e6165c5f495e8dc11c5bbd14c73385c
makes IP-Config wait for carrier on at least one network device.
Before waiting (predefined value 120s), check that at least one device
was successfully brought up. Otherwise (e.g. buggy bootloader
which does not set the MAC address) there is no point in waiting
for carrier.
Cc: Micha Nelissen <micha@neli.hopto.org>
Cc: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Graf [Mon, 19 Dec 2011 04:11:40 +0000 (04:11 +0000)]
sctp: Do not account for sizeof(struct sk_buff) in estimated rwnd
When checking whether a DATA chunk fits into the estimated rwnd a
full sizeof(struct sk_buff) is added to the needed chunk size. This
quickly exhausts the available rwnd space and leads to packets being
sent which are much below the PMTU limit. This can lead to much worse
performance.
The reason for this behaviour was to avoid putting too much memory
pressure on the receiver. The concept is not completely irational
because a Linux receiver does in fact clone an skb for each DATA chunk
delivered. However, Linux also reserves half the available socket
buffer space for data structures therefore usage of it is already
accounted for.
When proposing to change this the last time it was noted that this
behaviour was introduced to solve a performance issue caused by rwnd
overusage in combination with small DATA chunks.
Trying to reproduce this I found that with the sk_buff overhead removed,
the performance would improve significantly unless socket buffer limits
are increased.
The following numbers have been gathered using a patched iperf
supporting SCTP over a live 1 Gbit ethernet network. The -l option
was used to limit DATA chunk sizes. The numbers listed are based on
the average of 3 test runs each. Default values have been used for
sk_(r|w)mem.
Chunk
Size Unpatched No Overhead
-------------------------------------
4 15.2 Kbit [!] 12.2 Mbit [!]
8 35.8 Kbit [!] 26.0 Mbit [!]
16 95.5 Kbit [!] 54.4 Mbit [!]
32 106.7 Mbit 102.3 Mbit
64 189.2 Mbit 188.3 Mbit
128 331.2 Mbit 334.8 Mbit
256 537.7 Mbit 536.0 Mbit
512 766.9 Mbit 766.6 Mbit
1024 810.1 Mbit 808.6 Mbit
Signed-off-by: Thomas Graf <tgraf@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 20 Dec 2011 18:49:39 +0000 (10:49 -0800)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits)
Revert "[media] af9015: limit I2C access to keep FW happy"
[media] s5p-fimc: Fix camera input configuration in subdev operations
[media] m5mols: Fix logic in sanity check
[media] ati_remote: switch to single-byte scancodes
[media] V4L: mt9m111: fix uninitialised mutex
[media] V4L: omap1_camera: fix missing <linux/module.h> include
[media] V4L: mt9t112: use after free in mt9t112_probe()
[media] V4L: soc-camera: fix compiler warnings on 64-bit platforms
[media] s5p_mfc_enc: fix s/H264/H263/ typo
[media] omap_vout: Fix compile error in 3.1
[media] au0828: add missing models 72101, 72201 & 72261 to the model matrix
[media] au0828: add missing USB ID 2040:7213
[media] au0828: add missing USB ID 2040:7260
[media] [trivial] omap24xxcam-dma: Fix logical test
[media] omap_vout: fix crash if no driver for a display
[media] media: video: s5p-tv: fix build break
[media] omap3isp: fix compilation of ispvideo.c
[media] m5mols: Fix set_fmt to return proper pixel format code
[media] s5p-fimc: Use correct fourcc for RGB565 colour format
[media] s5p-fimc: Fail driver probing when sensor configuration is wrong
...
Michel Lespinasse [Tue, 20 Dec 2011 01:12:06 +0000 (17:12 -0800)]
binary_sysctl(): fix memory leak
binary_sysctl() calls sysctl_getname() which allocates from names_cache
slab usin __getname()
The matching function to free the name is __putname(), and not putname()
which should be used only to match getname() allocations.
This is because when auditing is enabled, putname() calls audit_putname
*instead* (not in addition) to __putname(). Then, if a syscall is in
progress, audit_putname does not release the name - instead, it expects
the name to get released when the syscall completes, but that will happen
only if audit_getname() was called previously, i.e. if the name was
allocated with getname() rather than the naked __getname(). So,
__getname() followed by putname() ends up leaking memory.
Signed-off-by: Michel Lespinasse <walken@google.com>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Eric Paris <eparis@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kautuk Consul [Tue, 20 Dec 2011 01:12:04 +0000 (17:12 -0800)]
mm/vmalloc.c: remove static declaration of va from __get_vm_area_node
Static storage is not required for the struct vmap_area in
__get_vm_area_node.
Removing "static" to store this variable on the stack instead.
Signed-off-by: Kautuk Consul <consul.kautuk@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Corey Minyard [Tue, 20 Dec 2011 01:12:02 +0000 (17:12 -0800)]
ipmi_watchdog: restore settings when BMC reset
If the BMC gets reset, it will return 0x80 response errors.
In less than a week
# grep "Error 80 on cmd 22" /var/log/kernel |wc -l
378681
In this case, it is probably a good idea to restore the IPMI settings.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com>
Reported-by: Arkadiusz Miśkiewicz <a.miskiewicz@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Frantisek Hrbata [Tue, 20 Dec 2011 01:11:59 +0000 (17:11 -0800)]
oom: fix integer overflow of points in oom_badness
An integer overflow will happen on 64bit archs if task's sum of rss,
swapents and nr_ptes exceeds (2^31)/1000 value. This was introduced by
commit
f755a04 oom: use pte pages in OOM score
where the oom score computation was divided into several steps and it's no
longer computed as one expression in unsigned long(rss, swapents, nr_pte
are unsigned long), where the result value assigned to points(int) is in
range(1..1000). So there could be an int overflow while computing
176 points *= 1000;
and points may have negative value. Meaning the oom score for a mem hog task
will be one.
196 if (points <= 0)
197 return 1;
For example:
[ 3366] 0 3366
35390480 24303939 5 0 0 oom01
Out of memory: Kill process 3366 (oom01) score 1 or sacrifice child
Here the oom1 process consumes more than
24303939(rss)*4096~=92GB physical
memory, but it's oom score is one.
In this situation the mem hog task is skipped and oom killer kills another and
most probably innocent task with oom score greater than one.
The points variable should be of type long instead of int to prevent the
int overflow.
Signed-off-by: Frantisek Hrbata <fhrbata@redhat.com>
Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Cc: <stable@vger.kernel.org> [2.6.36+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hillf Danton [Tue, 20 Dec 2011 01:11:57 +0000 (17:11 -0800)]
memcg: keep root group unchanged if creation fails
If the request is to create non-root group and we fail to meet it, we
should leave the root unchanged.
Signed-off-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Haogang Chen [Tue, 20 Dec 2011 01:11:56 +0000 (17:11 -0800)]
nilfs2: potential integer overflow in nilfs_ioctl_clean_segments()
There is a potential integer overflow in nilfs_ioctl_clean_segments().
When a large argv[n].v_nmembs is passed from the userspace, the subsequent
call to vmalloc() will allocate a buffer smaller than expected, which
leads to out-of-bound access in nilfs_ioctl_move_blocks() and
lfs_clean_segments().
The following check does not prevent the overflow because nsegs is also
controlled by the userspace and could be very large.
if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
goto out_free;
This patch clamps argv[n].v_nmembs to UINT_MAX / argv[n].v_size, and
returns -EINVAL when overflow.
Signed-off-by: Haogang Chen <haogangchen@gmail.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Thomas Meyer [Tue, 20 Dec 2011 01:11:55 +0000 (17:11 -0800)]
nilfs2: unbreak compat ioctl
commit
828b1c50ae ("nilfs2: add compat ioctl") incidentally broke all
other NILFS compat ioctls. Make them work again.
Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Tested-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: <stable@vger.kernel.org> [3.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
David Rientjes [Tue, 20 Dec 2011 01:11:52 +0000 (17:11 -0800)]
cpusets: stall when updating mems_allowed for mempolicy or disjoint nodemask
Kernels where MAX_NUMNODES > BITS_PER_LONG may temporarily see an empty
nodemask in a tsk's mempolicy if its previous nodemask is remapped onto a
new set of allowed cpuset nodes where the two nodemasks, as a result of
the remap, are now disjoint.
c0ff7453bb5c ("cpuset,mm: fix no node to alloc memory when changing
cpuset's mems") adds get_mems_allowed() to prevent the set of allowed
nodes from changing for a thread. This causes any update to a set of
allowed nodes to stall until put_mems_allowed() is called.
This stall is unncessary, however, if at least one node remains unchanged
in the update to the set of allowed nodes. This was addressed by
89e8a244b97e ("cpusets: avoid looping when storing to mems_allowed if one
node remains set"), but it's still possible that an empty nodemask may be
read from a mempolicy because the old nodemask may be remapped to the new
nodemask during rebind. To prevent this, only avoid the stall if there is
no mempolicy for the thread being changed.
This is a temporary solution until all reads from mempolicy nodemasks can
be guaranteed to not be empty without the get_mems_allowed()
synchronization.
Also moves the check for nodemask intersection inside task_lock() so that
tsk->mems_allowed cannot change. This ensures that nothing can set this
tsk's mems_allowed out from under us and also protects tsk->mempolicy.
Reported-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Lin [Fri, 9 Dec 2011 03:27:55 +0000 (11:27 +0800)]
mfd: Include linux/io.h to jz4740-adc
Include linux/io.h to fix below build error:
CC drivers/mfd/jz4740-adc.o
drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_irq_demux':
drivers/mfd/jz4740-adc.c:73: error: implicit declaration of function 'readb'
drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_set_enabled':
drivers/mfd/jz4740-adc.c:110: error: implicit declaration of function 'writeb'
drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_set_config':
drivers/mfd/jz4740-adc.c:146: error: implicit declaration of function 'readl'
drivers/mfd/jz4740-adc.c:151: error: implicit declaration of function 'writel'
drivers/mfd/jz4740-adc.c: In function 'jz4740_adc_probe':
drivers/mfd/jz4740-adc.c:249: error: implicit declaration of function 'ioremap_nocache'
drivers/mfd/jz4740-adc.c:249: warning: assignment makes pointer from integer without a cast
drivers/mfd/jz4740-adc.c:289: warning: passing argument 3 of 'mfd_add_devices' discards qualifiers from pointer target type
include/linux/mfd/core.h:93: note: expected 'struct mfd_cell *' but argument is of type 'const struct mfd_cell *'
drivers/mfd/jz4740-adc.c:299: error: implicit declaration of function 'iounmap'
make[2]: *** [drivers/mfd/jz4740-adc.o] Error 1
make[1]: *** [drivers/mfd] Error 2
make: *** [drivers] Error 2
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
NeilBrown [Sat, 26 Nov 2011 20:17:41 +0000 (07:17 +1100)]
mfd: Use request_threaded_irq for twl4030-irq instead of irq_set_chained_handler
irq_set_chained_handler sets 'desc->handle_irq'.
However this irq is called by handle_nested_irq from handle_twl4030_pih,
and that uses action->thread_fn.
So the handled set with irq_set_chained_handler is never called.
So change to use request_threaded_irq instead - that sets the correct field.
Tested on GTA04 Phoenux.
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
NeilBrown [Sat, 26 Nov 2011 20:17:41 +0000 (07:17 +1100)]
mfd: Base interrupt for twl4030-irq must be one-shot
As the interrupt source is only cleared by the threaded interrupt
service routine, we need to make the base interrupt IRQF_ONESHOT.
Without this, the first interrupt from the TWL4030 cause the CPU to
enter an infinite loop trying to handle to interrupt but never
clearing it.
Signed-off-by: NeilBrown <neilb@suse.de>
Tested-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Marcus Folkesson [Tue, 22 Nov 2011 13:39:51 +0000 (14:39 +0100)]
mfd: Handle tps65910 clear-mask correctly
The function is not actually cleaing the bitmask.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Thu, 10 Nov 2011 01:56:18 +0000 (09:56 +0800)]
mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resources
Fix below build warning if CONFIG_DEBUG_FS is disabled.
CC drivers/mfd/ab8500-core.o
drivers/mfd/ab8500-core.c:623: warning: 'ab8500_debug_resources' defined but not used
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Ilya Yanok [Mon, 1 Aug 2011 21:00:28 +0000 (23:00 +0200)]
mfd: Fix twl-core oops while calling twl_i2c_* for unbound driver
Check inuse variable before trying to access twl_map to prevent
dereferencing of uninitialized variable.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Cc: stable@kernel.org
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Mon, 7 Nov 2011 03:20:09 +0000 (11:20 +0800)]
mfd: include linux/module.h for ab5500-debugfs
Include linux/module.h to fix below build error:
CC drivers/mfd/ab5500-debugfs.o
drivers/mfd/ab5500-debugfs.c:571: error: 'THIS_MODULE' undeclared here (not in a function)
make[2]: *** [drivers/mfd/ab5500-debugfs.o] Error 1
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Fri, 4 Nov 2011 23:14:46 +0000 (23:14 +0000)]
mfd: Update wm8994 active device checks for WM1811
This didn't go in as part of the original MFD patch for WM1811 due to
cross tree issues.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Mon, 31 Oct 2011 06:24:30 +0000 (14:24 +0800)]
mfd: Set tps6586x bits if new value is different from the old one
It does not make sense to write new value only when all the bit_mask
bits are zero.
We need to write new value if the bit mask fields of new value is
not equal to old value.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Mon, 31 Oct 2011 06:23:03 +0000 (14:23 +0800)]
mfd: Set da903x bits if new value is different from the old one
It does not make sense to write new value only when all the bit_mask
bits are zero.
We need to write new value if the bit mask fields of new value is
not equal to old value.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Mon, 31 Oct 2011 03:00:06 +0000 (11:00 +0800)]
mfd: Set adp5520 bits if new value is different from the old one
Current code checks if all the bit_mask bits are all zero is wrong.
We need to write new value if the bit mask fields of new value is
not equal to old value.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Axel Lin [Mon, 31 Oct 2011 02:34:01 +0000 (10:34 +0800)]
mfd: Add missed free_irq in da903x_remove
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:37:01 +0000 (20:37 -0300)]
[media] tda10021: Add support for DVB-C Annex C
While tda10021 supports both DVB-C Annex A and C, it is currently
hard-coded to Annex A. Add support for Annex C and re-work the
code in order to report the delivery systems, thans to Andreas,
that passed us the register settings for the Roll-off factor.
Thanks-to: Andreas Oberriter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Tue, 20 Dec 2011 15:55:47 +0000 (13:55 -0200)]
[media] tda10021: Don't use a magic numbers for QAM modulation
Convert the existing data struct to use the QAM modulation macros,
instead of assuming that they're numbered from 0 to 5.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:37:00 +0000 (20:37 -0300)]
[media] tda10023: add support for DVB-C Annex C
The difference between Annex A and C is the roll-off factor.
Properly implement it inside the driver, using the information
provided by Andreas.
Thanks-to: Andreas Oberriter <obi@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Dmitry Kasatkin [Mon, 5 Dec 2011 11:17:42 +0000 (13:17 +0200)]
evm: prevent racing during tfm allocation
There is a small chance of racing during tfm allocation.
This patch fixes it.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Dmitry Kasatkin [Mon, 5 Dec 2011 11:17:41 +0000 (13:17 +0200)]
evm: key must be set once during initialization
On multi-core systems, setting of the key before every caclculation,
causes invalid HMAC calculation for other tfm users, because internal
state (ipad, opad) can be invalid before set key call returns.
It needs to be set only once during initialization.
Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:36:59 +0000 (20:36 -0300)]
[media] tda10023: Don't use a magic numbers for QAM modulation
Convert the existing data struct to use the QAM modulation macros,
instead of assuming that they're numbered from 0 to 5.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:36:58 +0000 (20:36 -0300)]
[media] drx-k: report the supported delivery systems
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:36:57 +0000 (20:36 -0300)]
[media] Remove Annex A/C selection via roll-off factor
Instead of using a roll-off factor, change DRX-K & friends to select
the bandwidth filter and the Nyquist half roll-off via delivery system.
This provides a cleaner support for Annex A/C switch.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Mauro Carvalho Chehab [Sat, 17 Dec 2011 23:36:56 +0000 (20:36 -0300)]
[media] Update documentation to reflect DVB-C Annex A/C support
Instead of using the same delivery system for both Annex A and
Annex C, split them into two separate ones. This helps to support
devices that only support Annex A.
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Manu Abraham [Sat, 17 Dec 2011 23:36:55 +0000 (20:36 -0300)]
[media] DVB: Use a unique delivery system identifier for DVBC_ANNEX_C
Use a unique delivery system identifier for DVBC_ANNEX_C, just like any
other.
DVBC_ANNEX_A and DVBC_ANNEX_C have slightly different parameters
and are used in 2 geographically different locations.
Signed-off-by: Manu Abraham <abraham.manu@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 7 Dec 2011 11:34:50 +0000 (08:34 -0300)]
[media] omap3isp: Mark next captured frame as faulty when an SBL overflow occurs
Instead of trying to propagate errors down the pipeline manually (and
failing to do so properly in all cases), flag SBL errors in the pipeline
to which the entity that triggered the error belongs, and use pipeline
error flags to mark buffers as faulty when completing them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Mon, 28 Nov 2011 11:25:30 +0000 (08:25 -0300)]
[media] omap3isp: video: Don't WARN() on unknown pixel formats
When mapping from a V4L2 pixel format to a media bus format in the
VIDIOC_TRY_FMT and VIDIOC_S_FMT handlers, the requested format may be
unsupported by the driver. Return a hardcoded format instead of
WARN()ing in that case.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Thu, 5 May 2011 18:39:25 +0000 (15:39 -0300)]
[media] as3645a: Add driver for LED flash controller
This patch adds the driver for the as3645a LED flash controller. This
controller supports a high power led in flash and torch modes and an
indicator light, sometimes also called privacy light.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com>
Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Antti Koskipaa <antti.koskipaa@gmail.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 10 Jun 2011 15:23:30 +0000 (12:23 -0300)]
[media] v4l: Add over-current and indicator flash fault bits
Flash controllers can report over-current and indicator fault
conditions. Define flash fault control bits for them.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Clemens Ladisch [Sat, 5 Nov 2011 21:42:01 +0000 (18:42 -0300)]
[media] media: fix truncated entity specification
When enumerating an entity, assign the entire entity specification
instead of only the first two words. (This requires giving the
specification union a name.)
So far, no driver actually uses more than two words, but this will
be needed for ALSA entities.
Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
[laurent.pinchart@ideasonboard.com: Rename specification to info]
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Wed, 16 Nov 2011 19:59:05 +0000 (16:59 -0300)]
[media] omap3isp: Clarify the clk_pol field in platform data
The field is used to select the polarity of the pixel clock signal.
"Inverted" and "non inverted" are bad descriptions, specify instead on
which clock edge the signals are sampled.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Fri, 11 Nov 2011 14:22:20 +0000 (11:22 -0300)]
[media] omap3isp: ccdc: Fix crash in HS/VS interrupt handler
The HS/VS interrupt handler needs to access the pipeline object. It
erronously tries to get it from the CCDC output video node, which isn't
necessarily included in the pipeline. This leads to a NULL pointer
dereference.
Fix the bug by getting the pipeline object from the CCDC subdev entity.
Reported-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Laurent Pinchart [Mon, 3 Oct 2011 10:56:15 +0000 (07:56 -0300)]
[media] omap3isp: preview: Rename max output sizes defines
The maximum preview engine output size depends on the ISP revision, not
the OMAP revision. Rename the macros accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Michael Krufky [Sun, 11 Dec 2011 21:51:01 +0000 (18:51 -0300)]
[media] mxl111sf: absorb size_of_priv into *_STREAMING_CONFIG macros
absorb ".size_of_priv = sizeof(struct mxl111sf_adap_state)"
into *_STREAMING_CONFIG macros
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Rusty Russell [Thu, 15 Dec 2011 03:04:50 +0000 (13:34 +1030)]
mmc: vub300: fix type of firmware_rom_wait_states module parameter
You didn't mean this to be a bool.
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tony Olech <tony.olech@elandigitalsystems.com>
Cc: <stable@kernel.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Ohad Ben-Cohen [Mon, 19 Dec 2011 23:51:38 +0000 (15:51 -0800)]
Revert "mmc: enable runtime PM by default"
When SDIO runtime PM was originally introduced, we immediately faced
two regressions with two different chipsets, and in response decided
not to enable it by default.
With the recent work on the 8686 we hoped we found all the gotchas,
so 08da834 did make sense (at least experimentally).
Unfortunately we now see that some setups out there still refuse to
work when SDIO runtime PM is enabled by default (see
http://www.spinics.net/lists/linux-mmc/msg11161.html), and obviously
we can't live with these kind of regressions.
This reverts commit
08da834a24312157f512224691ad1fddd11c1073.
Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Daniel Drake <dsd@laptop.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Manuel Lauss [Thu, 3 Nov 2011 10:09:45 +0000 (11:09 +0100)]
mmc: sdhci: remove "state" argument from sdhci_suspend_host
Drop the "state" argument from sdhci_suspend_host. Its only user is the
PCI glue; this allows to move all SDHCI glues to use dev_pm_ops instead.
Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>