netfilter: ipv6: nf_defrag: reduce struct net memory waste

[ Upstream commit 9ce7bc036ae4cfe3393232c86e9e1fea2153c237 ]

It is a waste of memory to use a full "struct netns_sysctl_ipv6"
while only one pointer is really used, considering netns_sysctl_ipv6
keeps growing.

Also, since "struct netns_frags" has cache line alignment,
it is better to move the frags_hdr pointer outside, otherwise
we spend a full cache line for this pointer.

This saves 192 bytes of memory per netns.

Fixes: c038a767cd69 ("ipv6: add a new namespace for nf_conntrack_reasm")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / EC: Use ec_no_wakeup on Thinkpad X1 Carbon 6th

[ Upstream commit 8195a655e5ce09550aff81b2573d9b015d520cb9 ]

On this system EC interrupt triggers constantly kicking devices out of
low power states and thus blocking power management. The system also has
a PCIe root port hosting Alpine Ridge Thunderbolt controller and it
never gets a chance to go to D3cold because of this.

Since the power button works the same regardless if EC interrupt is
enabled or not during s2idle, add a quirk for this machine that sets
ec_no_wakeup=true preventing spurious wakeups.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: of-simple: fix use-after-free on remove

[ Upstream commit 896e518883f18e601335908192e33426c1f599a4 ]

The clocks have already been explicitly disabled and put as part of
remove() so the runtime suspend callback must not be run when balancing
the runtime PM usage count before returning.

Fixes: 16adc674d0d6 ("usb: dwc3: add generic OF glue layer")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc2: gadget: Fix issue in dwc2_gadget_start_isoc()

[ Upstream commit 1ffba9058737af2ddeebc813faa8ea9b16bc892a ]

In case of requests queue is empty reset EP target_frame to
initial value.

This allow restarting ISOC traffic in case when function
driver queued requests with interruptions.

Tested-by: Zeng Tao <prime.zeng@hisilicon.com>
Signed-off-by: Minas Harutyunyan <hminas@synopsys.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers

[ Upstream commit d52e4d0c0c428bf2ba35074a7495cdb28e2efbae ]

This bug happens only when the UDC needs to sleep during usb_ep_dequeue,
as is the case for (at least) dwc3.

[  382.200896] BUG: scheduling while atomic: screen/1808/0x00000100
[  382.207124] 4 locks held by screen/1808:
[  382.211266]  #0:  (rcu_callback){....}, at: [<c10b4ff0>] rcu_process_callbacks+0x260/0x440
[  382.219949]  #1:  (rcu_read_lock_sched){....}, at: [<c1358ba0>] percpu_ref_switch_to_atomic_rcu+0xb0/0x130
[  382.230034]  #2:  (&(&ctx->ctx_lock)->rlock){....}, at: [<c11f0c73>] free_ioctx_users+0x23/0xd0
[  382.230096]  #3:  (&(&ffs->eps_lock)->rlock){....}, at: [<f81e7710>] ffs_aio_cancel+0x20/0x60 [usb_f_fs]
[  382.230160] Modules linked in: usb_f_fs libcomposite configfs bnep btsdio bluetooth ecdh_generic brcmfmac brcmutil intel_powerclamp coretemp dwc3 kvm_intel ulpi udc_core kvm irqbypass crc32_pclmul crc32c_intel pcbc dwc3_pci aesni_intel aes_i586 crypto_simd cryptd ehci_pci ehci_hcd gpio_keys usbcore basincove_gpadc industrialio usb_common
[  382.230407] CPU: 1 PID: 1808 Comm: screen Not tainted 4.14.0-edison+ #117
[  382.230416] Hardware name: Intel Corporation Merrifield/BODEGA BAY, BIOS 542 2015.01.21:18.19.48
[  382.230425] Call Trace:
[  382.230438]  <SOFTIRQ>
[  382.230466]  dump_stack+0x47/0x62
[  382.230498]  __schedule_bug+0x61/0x80
[  382.230522]  __schedule+0x43/0x7a0
[  382.230587]  schedule+0x5f/0x70
[  382.230625]  dwc3_gadget_ep_dequeue+0x14c/0x270 [dwc3]
[  382.230669]  ? do_wait_intr_irq+0x70/0x70
[  382.230724]  usb_ep_dequeue+0x19/0x90 [udc_core]
[  382.230770]  ffs_aio_cancel+0x37/0x60 [usb_f_fs]
[  382.230798]  kiocb_cancel+0x31/0x40
[  382.230822]  free_ioctx_users+0x4d/0xd0
[  382.230858]  percpu_ref_switch_to_atomic_rcu+0x10a/0x130
[  382.230881]  ? percpu_ref_exit+0x40/0x40
[  382.230904]  rcu_process_callbacks+0x2b3/0x440
[  382.230965]  __do_softirq+0xf8/0x26b
[  382.231011]  ? __softirqentry_text_start+0x8/0x8
[  382.231033]  do_softirq_own_stack+0x22/0x30
[  382.231042]  </SOFTIRQ>
[  382.231071]  irq_exit+0x45/0xc0
[  382.231089]  smp_apic_timer_interrupt+0x13c/0x150
[  382.231118]  apic_timer_interrupt+0x35/0x3c
[  382.231132] EIP: __copy_user_ll+0xe2/0xf0
[  382.231142] EFLAGS: 00210293 CPU: 1
[  382.231154] EAX: bfd4508c EBX: 00000004 ECX: 00000003 EDX: f3d8fe50
[  382.231165] ESI: f3d8fe51 EDI: bfd4508d EBP: f3d8fe14 ESP: f3d8fe08
[  382.231176]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[  382.231265]  core_sys_select+0x25f/0x320
[  382.231346]  ? __wake_up_common_lock+0x62/0x80
[  382.231399]  ? tty_ldisc_deref+0x13/0x20
[  382.231438]  ? ldsem_up_read+0x1b/0x40
[  382.231459]  ? tty_ldisc_deref+0x13/0x20
[  382.231479]  ? tty_write+0x29f/0x2e0
[  382.231514]  ? n_tty_ioctl+0xe0/0xe0
[  382.231541]  ? tty_write_unlock+0x30/0x30
[  382.231566]  ? __vfs_write+0x22/0x110
[  382.231604]  ? security_file_permission+0x2f/0xd0
[  382.231635]  ? rw_verify_area+0xac/0x120
[  382.231677]  ? vfs_write+0x103/0x180
[  382.231711]  SyS_select+0x87/0xc0
[  382.231739]  ? SyS_write+0x42/0x90
[  382.231781]  do_fast_syscall_32+0xd6/0x1a0
[  382.231836]  entry_SYSENTER_32+0x47/0x71
[  382.231848] EIP: 0xb7f75b05
[  382.231857] EFLAGS: 00000246 CPU: 1
[  382.231868] EAX: ffffffda EBX: 00000400 ECX: bfd4508c EDX: bfd4510c
[  382.231878] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: bfd45020
[  382.231889]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b
[  382.232281] softirq: huh, entered softirq 9 RCU c10b4d90 with preempt_count 00000100, exited with 00000000?

Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: pci: add support for Intel IceLake

[ Upstream commit 00908693c481f7298adf8cf4d2ff3dfbea8c375f ]

PCI IDs for Intel IceLake.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

soc: imx: gpcv2: correct PGC offset

[ Upstream commit 3637f12faf507b0a4b8ac1e7115fc99583ab1db3 ]

Correct MIPI/PCIe/USB_HSIC's PGC offset based on
design RTL, the values in the Reference Manual
(Rev. 1, 01/2018 and the older ones) are incorrect.

The correct offset values should be as below:

0x800 ~ 0x83F: PGC for core0 of A7 platform;
0x840 ~ 0x87F: PGC for core1 of A7 platform;
0x880 ~ 0x8BF: PGC for SCU of A7 platform;
0xA00 ~ 0xA3F: PGC for fastmix/megamix;
0xC00 ~ 0xC3F: PGC for MIPI PHY;
0xC40 ~ 0xC7F: PGC for PCIe_PHY;
0xC80 ~ 0xCBF: PGC for USB OTG1 PHY;
0xCC0 ~ 0xCFF: PGC for USB OTG2 PHY;
0xD00 ~ 0xD3F: PGC for USB HSIC PHY;

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Fixes: 03aa12629fc4 ("soc: imx: Add GPCv2 power gating driver")
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hwmon: (nct6775) Fix loop limit

[ Upstream commit 91bb8f45f73f19a0150c233c0f11cdeb6d71d1e9 ]

Commit cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label
handling") changed a loop limit from "data->temp_label_num - 1" to "32",
as part of moving from a string array to a bit mask. This results in the
following error, reported by UBSAN.

UBSAN: Undefined behaviour in drivers/hwmon/nct6775.c:4179:27
shift exponent 32 is too large for 32-bit type 'long unsigned int'

Similar to the original loop, the limit has to be one less than the
number of bits.

Fixes: cc66b3038254 ("hwmon: (nct6775) Rework temperature source and label handling")
Reported-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Cc: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel+linux-hwmon@molgen.mpg.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARC: Explicitly add -mmedium-calls to CFLAGS

[ Upstream commit 74c11e300c103af47db5b658fdcf28002421e250 ]

GCC built for arc*-*-linux has "-mmedium-calls" implicitly enabled by default
thus we don't see any problems during Linux kernel compilation.
----------------------------->8------------------------
arc-linux-gcc -mcpu=arc700 -Q --help=target | grep calls
  -mlong-calls                          [disabled]
  -mmedium-calls                        [enabled]
----------------------------->8------------------------

But if we try to use so-called Elf32 toolchain with GCC configured for
arc*-*-elf* then we'd see the following failure:
----------------------------->8------------------------
init/do_mounts.o: In function 'init_rootfs':
do_mounts.c:(.init.text+0x108): relocation truncated to fit: R_ARC_S21W_PCREL
against symbol 'unregister_filesystem' defined in .text section in fs/filesystems.o

arc-elf32-ld: final link failed: Symbol needs debug section which does not exist
make: *** [vmlinux] Error 1
----------------------------->8------------------------

That happens because neither "-mmedium-calls" nor "-mlong-calls" are enabled in
Elf32 GCC:
----------------------------->8------------------------
arc-elf32-gcc -mcpu=arc700 -Q --help=target | grep calls
  -mlong-calls                          [disabled]
  -mmedium-calls                        [disabled]
----------------------------->8------------------------

Now to make it possible to use Elf32 toolchain for building Linux kernel
we're explicitly add "-mmedium-calls" to CFLAGS.

And since we add "-mmedium-calls" to the global CFLAGS there's no point in
having per-file copies thus removing them.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge/sii8620: fix potential buffer overflow

[ Upstream commit 9378cecb1ce5d618b8aff4d65113ddcf72fc1011 ]

Buffer overflow error should not occur, as mode_fixup() callback
filters pixel clock value and it should never exceed 600000. However,
current implementation is not obviously safe and relies on
implementation of mode_fixup().

Make 'i' variable never reach unsafe value in order to avoid buffer
overflow error.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: bf1722ca ("drm/bridge/sii8620: rewrite hdmi start sequence")
Signed-off-by: Maciej Purski <m.purski@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1511341718-6974-1-git-send-email-m.purski@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/bridge/sii8620: fix loops in EDID fetch logic

[ Upstream commit 8e627a1b1ce8feb3e1da4428b71b9b4905f04888 ]

Function should constantly check if cable is connected and finish
in finite time.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Maciej Purski <m.purski@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180115173357.31067-4-a.hajda@samsung.com
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx4: Fix an error handling path in 'mlx4_ib_rereg_user_mr()'

[ Upstream commit 3dc7c7badb7502ec3e3aa817a8bdd9e53aa54c52 ]

Before returning -EPERM we should release some resources, as already done
in the other error handling path of the function.

Fixes: d8f9cc328c88 ("IB/mlx4: Mark user MR as writable if actual virtual memory is writable")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: synaptics-rmi4 - fix axis-swap behavior

[ Upstream commit 645a397d325db6e1bb36588095ae637738b37693 ]

The documentation for the touchscreen-swapped-x-y property states that
swapping is done after inverting if both are used. RMI4 did it the other
way around, leading to inconsistent behavior with regard to other
touchscreens.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Nick Dyer <nick@shmanahar.org>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf tools: Fix error index for pmu event parser

[ Upstream commit f7fa827f5f432a0b1f34e10fc49da93aeef9f817 ]

For events we provide specific error message we need to set error column
index, PMU parser is missing that, adding it.

Before:

  $ perf stat -e cycles,krava/cycles/ kill
  event syntax error: 'cycles,krava/cycles/'
                       \___ Cannot find PMU `krava'. Missing kernel support?

After:

  $ perf stat -e cycles,krava/cycles/ kill
  event syntax error: 'cycles,krava/cycles/'
                              \___ Cannot find PMU `krava'. Missing kernel support?

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20180606221513.11302-3-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vfio: ccw: fix error return in vfio_ccw_sch_event

[ Upstream commit 2c861d89ccda2fbcea9358eff9cc5f8fae548be5 ]

If the device has not been registered, or there is work pending,
we should reschedule a sch_event call again.

Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Message-Id: <20180502072559.50691-1-bjsdjshi@linux.vnet.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm: dts: armada: Fix "#cooling-cells" property's name

[ Upstream commit ac62cc9d9cd6fa4c79e171c13dc8d58c3862b678 ]

It should be "#cooling-cells" instead of "cooling-cells". Fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pty: fix O_CLOEXEC for TIOCGPTPEER

commit 36ecc1481dc8d8c52d43ba18c6b642c1d2fde789 upstream.

It was being ignored because the flags were not passed to fd allocation.

Fixes: 54ebbfb16034 ("tty: add TIOCGPTPEER ioctl")
Signed-off-by: Matthijs van Duin <matthijsvanduin@gmail.com>
Acked-by: Aleksa Sarai <asarai@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

EDAC: Add missing MEM_LRDDR4 entry in edac_mem_types[]

commit b748f2de4b2f578599f46c6000683a8da755bf68 upstream.

The edac_mem_types[] array misses a MEM_LRDDR4 entry, which leads to
NULL pointer dereference when accessed via sysfs or such.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Yazen Ghannam <Yazen.Ghannam@amd.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20180810141426.8918-1-tiwai@suse.de
Fixes: 1e8096bb2031 ("EDAC: Add LRDDR4 DRAM type")
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/kvmgt: Fix potential Spectre v1

commit de5372da605d3bca46e3102bab51b7e1c0e0a6f6 upstream.

info.index can be indirectly controlled by user-space, hence leading
to a potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/gpu/drm/i915/gvt/kvmgt.c:1232 intel_vgpu_ioctl() warn:
potential spectre issue 'vgpu->vdev.region' [r]

Fix this by sanitizing info.index before indirectly using it to index
vgpu->vdev.region

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix spectre gadget in ext4_mb_regular_allocator()

commit 1a5d5e5d51e75a5bca67dadbcea8c841934b7b85 upstream.

'ac->ac_g_ex.fe_len' is a user-controlled value which is used in the
derivation of 'ac->ac_2order'. 'ac->ac_2order', in turn, is used to
index arrays which makes it a potential spectre gadget. Fix this by
sanitizing the value assigned to 'ac->ac2_order'.  This covers the
following accesses found with the help of smatch:

* fs/ext4/mballoc.c:1896 ext4_mb_simple_scan_group() warn: potential
  spectre issue 'grp->bb_counters' [w] (local cap)

* fs/ext4/mballoc.c:445 mb_find_buddy() warn: potential spectre issue
  'EXT4_SB(e4b->bd_sb)->s_mb_offsets' [r] (local cap)

* fs/ext4/mballoc.c:446 mb_find_buddy() warn: potential spectre issue
  'EXT4_SB(e4b->bd_sb)->s_mb_maxs' [r] (local cap)

Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Jeremy Cline <jcline@redhat.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.66

cls_matchall: fix tcf_unbind_filter missing

[ Upstream commit a51c76b4dfb30496dc65396a957ef0f06af7fb22 ]

Fix tcf_unbind_filter missing in cls_matchall as this will trigger
WARN_ON() in cbq_destroy_class().

Fixes: fd62d9f5c575f ("net/sched: matchall: Fix configuration race")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

isdn: Disable IIOCDBGVAR

[ Upstream commit 5e22002aa8809e2efab2da95855f73f63e14a36c ]

It was possible to directly leak the kernel address where the isdn_dev
structure pointer was stored. This is a kernel ASLR bypass for anyone
with access to the ioctl. The code had been present since the beginning
of git history, though this shouldn't ever be needed for normal operation,
therefore remove it.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: avoid killing an already killed socket

commit 4e1a720d0312fd510699032c7694a362a010170f upstream.

slub debug reported:

[  440.648642] =============================================================================
[  440.648649] BUG kmalloc-1024 (Tainted: G    BU     O   ): Poison overwritten
[  440.648651] -----------------------------------------------------------------------------

[  440.648655] INFO: 0xe70f4bec-0xe70f4bec. First byte 0x6a instead of 0x6b
[  440.648665] INFO: Allocated in sk_prot_alloc+0x6b/0xc6 age=33155 cpu=1 pid=1047
[  440.648671]  ___slab_alloc.constprop.24+0x1fc/0x292
[  440.648675]  __slab_alloc.isra.18.constprop.23+0x1c/0x25
[  440.648677]  __kmalloc+0xb6/0x17f
[  440.648680]  sk_prot_alloc+0x6b/0xc6
[  440.648683]  sk_alloc+0x1e/0xa1
[  440.648700]  sco_sock_alloc.constprop.6+0x26/0xaf [bluetooth]
[  440.648716]  sco_connect_cfm+0x166/0x281 [bluetooth]
[  440.648731]  hci_conn_request_evt.isra.53+0x258/0x281 [bluetooth]
[  440.648746]  hci_event_packet+0x28b/0x2326 [bluetooth]
[  440.648759]  hci_rx_work+0x161/0x291 [bluetooth]
[  440.648764]  process_one_work+0x163/0x2b2
[  440.648767]  worker_thread+0x1a9/0x25c
[  440.648770]  kthread+0xf8/0xfd
[  440.648774]  ret_from_fork+0x2e/0x38
[  440.648779] INFO: Freed in __sk_destruct+0xd3/0xdf age=3815 cpu=1 pid=1047
[  440.648782]  __slab_free+0x4b/0x27a
[  440.648784]  kfree+0x12e/0x155
[  440.648787]  __sk_destruct+0xd3/0xdf
[  440.648790]  sk_destruct+0x27/0x29
[  440.648793]  __sk_free+0x75/0x91
[  440.648795]  sk_free+0x1c/0x1e
[  440.648810]  sco_sock_kill+0x5a/0x5f [bluetooth]
[  440.648825]  sco_conn_del+0x8e/0xba [bluetooth]
[  440.648840]  sco_disconn_cfm+0x3a/0x41 [bluetooth]
[  440.648855]  hci_event_packet+0x45e/0x2326 [bluetooth]
[  440.648868]  hci_rx_work+0x161/0x291 [bluetooth]
[  440.648872]  process_one_work+0x163/0x2b2
[  440.648875]  worker_thread+0x1a9/0x25c
[  440.648877]  kthread+0xf8/0xfd
[  440.648880]  ret_from_fork+0x2e/0x38
[  440.648884] INFO: Slab 0xf4718580 objects=27 used=27 fp=0x  (null) flags=0x40008100
[  440.648886] INFO: Object 0xe70f4b88 @offset=19336 fp=0xe70f54f8

When KASAN was enabled, it reported:

[  210.096613] ==================================================================
[  210.096634] BUG: KASAN: use-after-free in ex_handler_refcount+0x5b/0x127
[  210.096641] Write of size 4 at addr ffff880107e17160 by task kworker/u9:1/2040

[  210.096651] CPU: 1 PID: 2040 Comm: kworker/u9:1 Tainted: G     U     O    4.14.47-20180606+ #2
[  210.096654] Hardware name: , BIOS 2017.01-00087-g43e04de 08/30/2017
[  210.096693] Workqueue: hci0 hci_rx_work [bluetooth]
[  210.096698] Call Trace:
[  210.096711]  dump_stack+0x46/0x59
[  210.096722]  print_address_description+0x6b/0x23b
[  210.096729]  ? ex_handler_refcount+0x5b/0x127
[  210.096736]  kasan_report+0x220/0x246
[  210.096744]  ex_handler_refcount+0x5b/0x127
[  210.096751]  ? ex_handler_clear_fs+0x85/0x85
[  210.096757]  fixup_exception+0x8c/0x96
[  210.096766]  do_trap+0x66/0x2c1
[  210.096773]  do_error_trap+0x152/0x180
[  210.096781]  ? fixup_bug+0x78/0x78
[  210.096817]  ? hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096824]  ? __schedule+0x113b/0x1453
[  210.096830]  ? sysctl_net_exit+0xe/0xe
[  210.096837]  ? __wake_up_common+0x343/0x343
[  210.096843]  ? insert_work+0x107/0x163
[  210.096850]  invalid_op+0x1b/0x40
[  210.096888] RIP: 0010:hci_debugfs_create_conn+0x244/0x26a [bluetooth]
[  210.096892] RSP: 0018:ffff880094a0f970 EFLAGS: 00010296
[  210.096898] RAX: 0000000000000000 RBX: ffff880107e170e8 RCX: ffff880107e17160
[  210.096902] RDX: 000000000000002f RSI: ffff88013b80ed40 RDI: ffffffffa058b940
[  210.096906] RBP: ffff88011b2b0578 R08: 00000000852f0ec9 R09: ffffffff81cfcf9b
[  210.096909] R10: 00000000d21bdad7 R11: 0000000000000001 R12: ffff8800967b0488
[  210.096913] R13: ffff880107e17168 R14: 0000000000000068 R15: ffff8800949c0008
[  210.096920]  ? __sk_destruct+0x2c6/0x2d4
[  210.096959]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.096969]  ? __local_bh_enable_ip+0x43/0x5b
[  210.097004]  ? l2cap_sock_recv_cb+0x158/0x166 [bluetooth]
[  210.097039]  ? hci_le_meta_evt+0x2bb3/0x2bb3 [bluetooth]
[  210.097075]  ? l2cap_ertm_init+0x94e/0x94e [bluetooth]
[  210.097093]  ? xhci_urb_enqueue+0xbd8/0xcf5 [xhci_hcd]
[  210.097102]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097109]  ? __accumulate_pelt_segments+0x24/0x33
[  210.097115]  ? __update_load_avg_se.isra.2+0x217/0x3a4
[  210.097122]  ? set_next_entity+0x7c3/0x12cd
[  210.097128]  ? pick_next_entity+0x25e/0x26c
[  210.097135]  ? pick_next_task_fair+0x2ca/0xc1a
[  210.097141]  ? switch_mm_irqs_off+0x346/0xb4f
[  210.097147]  ? __switch_to+0x769/0xbc4
[  210.097153]  ? compat_start_thread+0x66/0x66
[  210.097188]  ? hci_conn_check_link_mode+0x1cd/0x1cd [bluetooth]
[  210.097195]  ? finish_task_switch+0x392/0x431
[  210.097228]  ? hci_rx_work+0x154/0x487 [bluetooth]
[  210.097260]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097269]  process_one_work+0x579/0x9e9
[  210.097277]  worker_thread+0x68f/0x804
[  210.097285]  kthread+0x31c/0x32b
[  210.097292]  ? rescuer_thread+0x70c/0x70c
[  210.097299]  ? kthread_create_on_node+0xa3/0xa3
[  210.097306]  ret_from_fork+0x35/0x40

[  210.097314] Allocated by task 2040:
[  210.097323]  kasan_kmalloc.part.1+0x51/0xc7
[  210.097328]  __kmalloc+0x17f/0x1b6
[  210.097335]  sk_prot_alloc+0xf2/0x1a3
[  210.097340]  sk_alloc+0x22/0x297
[  210.097375]  sco_sock_alloc.constprop.7+0x23/0x202 [bluetooth]
[  210.097410]  sco_connect_cfm+0x2d0/0x566 [bluetooth]
[  210.097443]  hci_conn_request_evt.isra.53+0x6d3/0x762 [bluetooth]
[  210.097476]  hci_event_packet+0x85e/0x7de2 [bluetooth]
[  210.097507]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097512]  process_one_work+0x579/0x9e9
[  210.097517]  worker_thread+0x68f/0x804
[  210.097523]  kthread+0x31c/0x32b
[  210.097529]  ret_from_fork+0x35/0x40

[  210.097533] Freed by task 2040:
[  210.097539]  kasan_slab_free+0xb3/0x15e
[  210.097544]  kfree+0x103/0x1a9
[  210.097549]  __sk_destruct+0x2c6/0x2d4
[  210.097584]  sco_conn_del.isra.1+0xba/0x10e [bluetooth]
[  210.097617]  hci_event_packet+0xff5/0x7de2 [bluetooth]
[  210.097648]  hci_rx_work+0x154/0x487 [bluetooth]
[  210.097653]  process_one_work+0x579/0x9e9
[  210.097658]  worker_thread+0x68f/0x804
[  210.097663]  kthread+0x31c/0x32b
[  210.097670]  ret_from_fork+0x35/0x40

[  210.097676] The buggy address belongs to the object at ffff880107e170e8
 which belongs to the cache kmalloc-1024 of size 1024
[  210.097681] The buggy address is located 120 bytes inside of
 1024-byte region [ffff880107e170e8, ffff880107e174e8)
[  210.097683] The buggy address belongs to the page:
[  210.097689] page:ffffea00041f8400 count:1 mapcount:0 mapping:          (null) index:0xffff880107e15b68 compound_mapcount: 0
[  210.110194] flags: 0x8000000000008100(slab|head)
[  210.115441] raw: 8000000000008100 0000000000000000 ffff880107e15b68 0000000100170016
[  210.115448] raw: ffffea0004a47620 ffffea0004b48e20 ffff88013b80ed40 0000000000000000
[  210.115451] page dumped because: kasan: bad access detected

[  210.115454] Memory state around the buggy address:
[  210.115460]  ffff880107e17000: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[  210.115465]  ffff880107e17080: fc fc fc fc fc fc fc fc fc fc fc fc fc fb fb fb
[  210.115469] >ffff880107e17100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115472]                                                        ^
[  210.115477]  ffff880107e17180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115481]  ffff880107e17200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[  210.115483] ==================================================================

And finally when BT_DBG() and ftrace was enabled it showed:

       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_close
       <...>-14979 [001] ....   186.104191: sco_sock_kill <-sco_sock_release
       <...>-14979 [001] ....   186.104192: sco_sock_kill: sk ef0497a0 state 9
       <...>-14979 [001] ....   186.104193: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104246: sco_sock_kill <-sco_conn_del
kworker/u9:2-792   [001] ....   186.104248: sco_sock_kill: sk ef0497a0 state 9
kworker/u9:2-792   [001] ....   186.104249: bt_sock_unlink <-sco_sock_kill
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct <-__sk_destruct
kworker/u9:2-792   [001] ....   186.104250: sco_sock_destruct: sk ef0497a0
kworker/u9:2-792   [001] ....   186.104860: hci_conn_del <-hci_event_packet
kworker/u9:2-792   [001] ....   186.104864: hci_conn_del: hci0 hcon ef0484c0 handle 266

Only in the failed case, sco_sock_kill() gets called with the same sock
pointer two times. Add a check for SOCK_DEAD to avoid continue killing
a socket which has already been killed.

Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

misc: sram: fix resource leaks in probe error path

commit f294d00961d1d869ecffa60e280eeeee1ccf9a49 upstream.

Make sure to disable clocks and deregister any exported partitions
before returning on late probe errors.

Note that since commit ee895ccdf776 ("misc: sram: fix enabled clock leak
on error path"), partitions are deliberately exported before enabling
the clock so we stick to that logic here. A follow up patch will address
this.

Cc: stable <stable@vger.kernel.org> # 4.9
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: Add ACPI support for uart on Broadcom SoC

commit 784c29eda5b4e28c3a56aa90b3815f9a1b0cfdc1 upstream.

Add ACPI identifier HID for UART DW 8250 on Broadcom SoCs
to match the HID passed through ACPI tables to enable
UART controller.

Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Reviewed-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Tested-by: Vladimir Olovyannikov <vladimir.olovyannikov@broadcom.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_dw: always set baud rate in dw8250_set_termios

commit dfcab6ba573445c703235ab6c83758eec12d7f28 upstream.

dw8250_set_termios() doesn't set baud rate if the arg "old ktermios" is
NULL. This happens during resume.
Call Trace:
...
[   54.928108] dw8250_set_termios+0x162/0x170
[   54.928114] serial8250_set_termios+0x17/0x20
[   54.928117] uart_change_speed+0x64/0x160
[   54.928119] uart_resume_port
...

So the baud rate is not restored after S3 and breaks the apps who use
UART, for example, console and bluetooth etc.

We address this issue by setting the baud rate irrespective of arg
"old", just like the drivers for other 8250 IPs. This is tested with
Intel Broxton platform.

Signed-off-by: Chen Hu <hu1.chen@intel.com>
Fixes: 4e26b134bd17 ("serial: 8250_dw: clock rate handling for all ACPI platforms")
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: 8250_exar: Read INT0 from slave device, too

commit 60ab0fafc4b652fcaf7cbc3bb8555a0cf1149c28 upstream.

The sleep wake-up refactoring that I introduced in

  commit c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")

did not account for devices with a slave device on the expansion port.
This patch pokes the INT0 register in the slave device, if present, in
order to ensure that MSI interrupts don't get permanently "stuck"
because of a sleep wake-up interrupt as described here:

  commit 2c0ac5b48a35 ("serial: exar: Fix stuck MSIs")

This also converts an ioread8() to readb() in order to provide visual
consistency with the MMIO-only accessors used elsewhere in the driver.

Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Fixes: c7e1b4059075 ("tty: serial: exar: Relocate sleep wake-up handling")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tty: serial: 8250: Revert NXP SC16C2552 workaround

commit 47ac76662ca9c5852fd353093f19de3ae85f2e66 upstream.

Revert commit ecb988a3b7985913d1f0112f66667cdd15e40711: tty: serial:
8250: 8250_core: NXP SC16C2552 workaround

The above commit causes userland application to no longer write
correctly its first write to a dumb terminal connected to /dev/ttyS0.
This commit seems to be the culprit. It's as though the TX FIFO is being
reset during that write. What should be displayed is:

PSW 80000000 INST 00000000                           HALT
//

What is displayed is some variation of:

T 00000000           HAL//

Reverting this commit via this patch fixes my problem.

Signed-off-by: Mark Hounschell <dmarkh@cfl.rr.com>
Fixes: ecb988a3b798 ("tty: serial: 8250: 8250_core: NXP SC16C2552 workaround")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / PM: save NVS memory for ASUS 1025C laptop

commit 231f9415001138a000cd0f881c46654b7ea3f8c5 upstream.

Every time I tried to upgrade my laptop from 3.10.x to 4.x I faced an
issue by which the fan would run at full speed upon resume. Bisecting
it showed me the issue was introduced in 3.17 by commit 821d6f0359b0
(ACPI / sleep: Do not save NVS for new machines to accelerate S3). This
code only affects machines built starting as of 2012, but this Asus
1025C laptop was made in 2012 and apparently needs the NVS data to be
saved, otherwise the CPU's thermal state is not properly reported on
resume and the fan runs at full speed upon resume.

Here's a very simple way to check if such a machine is affected :

  # cat /sys/class/thermal/thermal_zone0/temp
  55000

  ( now suspend, wait one second and resume )

  # cat /sys/class/thermal/thermal_zone0/temp
  0

  (and after ~15 seconds the fan starts to spin)

Let's apply the same quirk as commit cbc00c13 (ACPI: save NVS memory
for Lenovo G50-45) and reuse the function it provides. Note that this
commit was already backported to 4.9.x but not 4.4.x.

Cc: 3.17+ <stable@vger.kernel.org> # 3.17+: requires cbc00c13
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: option: add support for DW5821e

commit 7bab01ecc6c43da882333c6db39741cb43677004 upstream.

The device exposes AT, NMEA and DIAG ports in both USB configurations.

The patch explicitly ignores interfaces 0 and 1, as they're bound to
other drivers already; and also interface 6, which is a GNSS interface
for which we don't have a driver yet.

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 18 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 7 Cfg#= 2 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
I:  If#= 6 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

T:  Bus=01 Lev=03 Prnt=04 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0
D:  Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  2
P:  Vendor=413c ProdID=81d7 Rev=03.18
S:  Manufacturer=DELL
S:  Product=DW5821e Snapdragon X20 LTE
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option

Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: pl2303: add a new device id for ATEN

commit 29c692c96b3a39cd1911fb79cd2505af8d070f07 upstream.

Signed-off-by: Movie Song <MovieSong@aten-itlab.cn>
Cc: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: serial: sierra: fix potential deadlock at close

commit e60870012e5a35b1506d7b376fddfb30e9da0b27 upstream.

The portdata spinlock can be taken in interrupt context (via
sierra_outdat_callback()).
Disable interrupts when taking the portdata spinlock when discarding
deferred URBs during close to prevent a possible deadlock.

Fixes: 014333f77c0b ("USB: sierra: fix urb and memory leak on disconnect")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[ johan: amend commit message and add fixes and stable tags ]
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: vxpocket: Fix invalid endian conversions

commit 3acd3e3bab95ec3622ff98da313290ee823a0f68 upstream.

The endian conversions used in vxp_dma_read() and vxp_dma_write() are
superfluous and even wrong on big-endian machines, as inw() and outw()
already do conversions.  Kill them.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: memalloc: Don't exceed over the requested size

commit dfef01e150824b0e6da750cacda8958188d29aea upstream.

snd_dma_alloc_pages_fallback() tries to allocate pages again when the
allocation fails with reduced size.  But the first try actually
*increases* the size to power-of-two, which may give back a larger
chunk than the requested size.  This confuses the callers, e.g. sgbuf
assumes that the size is equal or less, and it may result in a bad
loop due to the underflow and eventually lead to Oops.

The code of this function seems incorrectly assuming the usage of
get_order().  We need to decrease at first, then align to
power-of-two.

Reported-and-tested-by: he, bo <bo.he@intel.com>
Reported-by: zhang jun <jun.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda: Correct Asrock B85M-ITX power_save blacklist entry

commit 8e82a728792bf66b9f0a29c9d4c4b0630f7b9c79 upstream.

I added the subsys product-id for the HDMI HDA device rather then for
the PCH one, this commit fixes this.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: cs5535audio: Fix invalid endian conversion

commit 69756930f2de0457d51db7d505a1e4f40e9fd116 upstream.

One place in cs5535audio_build_dma_packets() does an extra conversion
via cpu_to_le32(); namely jmpprd_addr is passed to setup_prd() ops,
which writes the value via cs_writel().  That is, the callback does
the conversion by itself, and we don't need to convert beforehand.

This patch fixes that bogus conversion.

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: virmidi: Fix too long output trigger loop

commit 50e9ffb1996a5d11ff5040a266585bad4ceeca0a upstream.

The virmidi output trigger tries to parse the all available bytes and
process sequencer events as much as possible.  In a normal situation,
this is supposed to be relatively short, but a program may give a huge
buffer and it'll take a long time in a single spin lock, which may
eventually lead to a soft lockup.

This patch simply adds a workaround, a cond_resched() call in the loop
if applicable.  A better solution would be to move the event processor
into a work, but let's put a duct-tape quickly at first.

Reported-and-tested-by: Dae R. Jeong <threeearcat@gmail.com>
Reported-by: syzbot+619d9f40141d826b097e@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: vx222: Fix invalid endian conversions

commit fff71a4c050ba46e305d910c837b99ba1728135e upstream.

The endian conversions used in vx2_dma_read() and vx2_dma_write() are
superfluous and even wrong on big-endian machines, as inl() and outl()
already do conversions.  Kill them.

Spotted by sparse, a warning like:
  sound/pci/vx222/vx222_ops.c:278:30: warning: incorrect type in argument 1 (different base types)

Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Turn CX8200 into D3 as well upon reboot

commit d77a4b4a5b0b2ebcbc9840995d91311ef28302ab upstream.

As an equivalent codec with CX20724,
CX8200 is also subject to the reboot bug.

Late 2017 and 2018 LG Gram and some HP Spectre laptops are known victims
to this issue, causing extremely loud noises upon reboot.

Now that we know that this bug is subject to multiple codecs,
fix the comment as well.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Sleep for 10ms after entering D3 on Conexant codecs

commit f59cf9a0551dd954ad8b752461cf19d9789f4b1d upstream.

On rare occasions, we are still noticing that the internal speaker
spitting out spurious noises even after adding the problematic codec
to the list.

Adding a 10ms artificial delay before rebooting fixes the issue entirely.

Patch for Realtek codecs also adds the same amount of delay after
entering D3.

Signed-off-by: Park Ju Hyung <qkrwngud825@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: aquantia: Fix IFF_ALLMULTI flag functionality

[ Upstream commit 11ba961c916127651e12af6cad3891f8aeb25aa9 ]

It was noticed that NIC always pass all multicast traffic to the host
regardless of IFF_ALLMULTI flag on the interface.
The rule in MC Filter Table in NIC, that is configured to accept any
multicast packets, is turning on if IFF_MULTICAST flag is set on the
interface. It leads to passing all multicast traffic to the host.
This fix changes the condition to turn on that rule by checking
IFF_ALLMULTI flag as it should.

Fixes: b21f502f84be ("net:ethernet:aquantia: Fix for multicast filter handling.")
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ip6_tunnel: use the right value for ipv4 min mtu check in ip6_tnl_xmit

[ Upstream commit 82a40777de12728dedf4075453b694f0d1baee80 ]

According to RFC791, 68 bytes is the minimum size of IPv4 datagram every
device must be able to forward without further fragmentation while 576
bytes is the minimum size of IPv4 datagram every device has to be able
to receive, so in ip6_tnl_xmit(), 68(IPV4_MIN_MTU) should be the right
value for the ipv4 min mtu check in ip6_tnl_xmit.

While at it, change to use max() instead of if statement.

Fixes: c9fefa08190f ("ip6_tunnel: get the min mtu properly in ip6_tnl_xmit")
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vhost: reset metadata cache when initializing new IOTLB

[ Upstream commit b13f9c6364373a1b9f71e9846dc4fb199296f926 ]

We need to reset metadata cache during new IOTLB initialization,
otherwise the stale pointers to previous IOTLB may be still accessed
which will lead a use after free.

Reported-by: syzbot+c51e6736a1bf614b3272@syzkaller.appspotmail.com
Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: Fix missing res info when create new tc_index filter

[ Upstream commit 008369dcc5f7bfba526c98054f8525322acf0ea3 ]

Li Shuang reported the following warn:

[  733.484610] WARNING: CPU: 6 PID: 21123 at net/sched/sch_cbq.c:1418 cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.495190] Modules linked in: sch_cbq cls_tcindex sch_dsmark rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat l
[  733.574155]  syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm igb ixgbe ahci libahci i2c_algo_bit libata i40e i2c_core dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[  733.592500] CPU: 6 PID: 21123 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[  733.600169] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[  733.608518] RIP: 0010:cbq_destroy_class+0x5d/0x70 [sch_cbq]
[  733.614734] Code: e7 d9 d2 48 8b 7b 48 e8 61 05 da d2 48 8d bb f8 00 00 00 e8 75 ae d5 d2 48 39 eb 74 0a 48 89 df 5b 5d e9 16 6c 94 d2 5b 5d c3 <0f> 0b eb b6 0f 1f 44 00 00 66 2e 0f 1f 84
[  733.635798] RSP: 0018:ffffbfbb066bb9d8 EFLAGS: 00010202
[  733.641627] RAX: 0000000000000001 RBX: ffff9cdd17392800 RCX: 000000008010000f
[  733.649588] RDX: ffff9cdd1df547e0 RSI: ffff9cdd17392800 RDI: ffff9cdd0f84c800
[  733.657547] RBP: ffff9cdd0f84c800 R08: 0000000000000001 R09: 0000000000000000
[  733.665508] R10: ffff9cdd0f84d000 R11: 0000000000000001 R12: 0000000000000001
[  733.673469] R13: 0000000000000000 R14: 0000000000000001 R15: ffff9cdd17392200
[  733.681430] FS:  00007f911890a740(0000) GS:ffff9cdd1f8c0000(0000) knlGS:0000000000000000
[  733.690456] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  733.696864] CR2: 0000000000b5544c CR3: 0000000859374002 CR4: 00000000001606e0
[  733.704826] Call Trace:
[  733.707554]  cbq_destroy+0xa1/0xd0 [sch_cbq]
[  733.712318]  qdisc_destroy+0x62/0x130
[  733.716401]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[  733.721745]  qdisc_destroy+0x62/0x130
[  733.725829]  qdisc_graft+0x3ba/0x470
[  733.729817]  tc_get_qdisc+0x2a6/0x2c0
[  733.733901]  ? cred_has_capability+0x7d/0x130
[  733.738761]  rtnetlink_rcv_msg+0x263/0x2d0
[  733.743330]  ? rtnl_calcit.isra.30+0x110/0x110
[  733.748287]  netlink_rcv_skb+0x4d/0x130
[  733.752576]  netlink_unicast+0x1a3/0x250
[  733.756949]  netlink_sendmsg+0x2ae/0x3a0
[  733.761324]  sock_sendmsg+0x36/0x40
[  733.765213]  ___sys_sendmsg+0x26f/0x2d0
[  733.769493]  ? handle_pte_fault+0x586/0xdf0
[  733.774158]  ? __handle_mm_fault+0x389/0x500
[  733.778919]  ? __sys_sendmsg+0x5e/0xa0
[  733.783099]  __sys_sendmsg+0x5e/0xa0
[  733.787087]  do_syscall_64+0x5b/0x180
[  733.791171]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  733.796805] RIP: 0033:0x7f9117f23f10
[  733.800791] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[  733.821873] RSP: 002b:00007ffe96818398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[  733.830319] RAX: ffffffffffffffda RBX: 000000005b71244c RCX: 00007f9117f23f10
[  733.838280] RDX: 0000000000000000 RSI: 00007ffe968183e0 RDI: 0000000000000003
[  733.846241] RBP: 00007ffe968183e0 R08: 000000000000ffff R09: 0000000000000003
[  733.854202] R10: 00007ffe96817e20 R11: 0000000000000246 R12: 0000000000000000
[  733.862161] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[  733.870121] ---[ end trace 28edd4aad712ddca ]---

This is because we didn't update f->result.res when create new filter. Then in
tcindex_delete() -> tcf_unbind_filter(), we will failed to find out the res
and unbind filter, which will trigger the WARN_ON() in cbq_destroy_class().

Fix it by updating f->result.res when create new filter.

Fixes: 6e0565697a106 ("net_sched: fix another crash in cls_tcindex")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vsock: split dwork to avoid reinitializations

[ Upstream commit 455f05ecd2b219e9a216050796d30c830d9bc393 ]

syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():

ODEBUG: init active (active state 0) object type: timer_list hint:
delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326

The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.

Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net_sched: fix NULL pointer dereference when delete tcindex filter

[ Upstream commit 2df8bee5654bb2b7312662ca6810d4dc16b0b67f ]

Li Shuang reported the following crash:

[   71.267724] BUG: unable to handle kernel NULL pointer dereference at 0000000000000004
[   71.276456] PGD 800000085d9bd067 P4D 800000085d9bd067 PUD 859a0b067 PMD 0
[   71.284127] Oops: 0000 [#1] SMP PTI
[   71.288015] CPU: 12 PID: 2386 Comm: tc Not tainted 4.18.0-rc8.latest+ #131
[   71.295686] Hardware name: Dell Inc. PowerEdge R730/0WCJNT, BIOS 2.1.5 04/11/2016
[   71.304037] RIP: 0010:tcindex_delete+0x72/0x280 [cls_tcindex]
[   71.310446] Code: 00 31 f6 48 87 75 20 48 85 f6 74 11 48 8b 47 18 48 8b 40 08 48 8b 40 50 e8 fb a6 f8 fc 48 85 db 0f 84 dc 00 00 00 48 8b 73 18 <8b> 56 04 48 8d 7e 04 85 d2 0f 84 7b 01 00
[   71.331517] RSP: 0018:ffffb45207b3f898 EFLAGS: 00010282
[   71.337345] RAX: ffff8ad3d72d6360 RBX: ffff8acc84393680 RCX: 000000000000002e
[   71.345306] RDX: ffff8ad3d72c8570 RSI: 0000000000000000 RDI: ffff8ad847a45800
[   71.353277] RBP: ffff8acc84393688 R08: ffff8ad3d72c8400 R09: 0000000000000000
[   71.361238] R10: ffff8ad3de786e00 R11: 0000000000000000 R12: ffffb45207b3f8c7
[   71.369199] R13: ffff8ad3d93bd2a0 R14: 000000000000002e R15: ffff8ad3d72c9600
[   71.377161] FS:  00007f9d3ec3e740(0000) GS:ffff8ad3df980000(0000) knlGS:0000000000000000
[   71.386188] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   71.392597] CR2: 0000000000000004 CR3: 0000000852f06003 CR4: 00000000001606e0
[   71.400558] Call Trace:
[   71.403299]  tcindex_destroy_element+0x25/0x40 [cls_tcindex]
[   71.409611]  tcindex_walk+0xbb/0x110 [cls_tcindex]
[   71.414953]  tcindex_destroy+0x44/0x90 [cls_tcindex]
[   71.420492]  ? tcindex_delete+0x280/0x280 [cls_tcindex]
[   71.426323]  tcf_proto_destroy+0x16/0x40
[   71.430696]  tcf_chain_flush+0x51/0x70
[   71.434876]  tcf_block_put_ext.part.30+0x8f/0x1b0
[   71.440122]  tcf_block_put+0x4d/0x70
[   71.444108]  cbq_destroy+0x4d/0xd0 [sch_cbq]
[   71.448869]  qdisc_destroy+0x62/0x130
[   71.452951]  dsmark_destroy+0x2a/0x70 [sch_dsmark]
[   71.458300]  qdisc_destroy+0x62/0x130
[   71.462373]  qdisc_graft+0x3ba/0x470
[   71.466359]  tc_get_qdisc+0x2a6/0x2c0
[   71.470443]  ? cred_has_capability+0x7d/0x130
[   71.475307]  rtnetlink_rcv_msg+0x263/0x2d0
[   71.479875]  ? rtnl_calcit.isra.30+0x110/0x110
[   71.484832]  netlink_rcv_skb+0x4d/0x130
[   71.489109]  netlink_unicast+0x1a3/0x250
[   71.493482]  netlink_sendmsg+0x2ae/0x3a0
[   71.497859]  sock_sendmsg+0x36/0x40
[   71.501748]  ___sys_sendmsg+0x26f/0x2d0
[   71.506029]  ? handle_pte_fault+0x586/0xdf0
[   71.510694]  ? __handle_mm_fault+0x389/0x500
[   71.515457]  ? __sys_sendmsg+0x5e/0xa0
[   71.519636]  __sys_sendmsg+0x5e/0xa0
[   71.523626]  do_syscall_64+0x5b/0x180
[   71.527711]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[   71.533345] RIP: 0033:0x7f9d3e257f10
[   71.537331] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8
[   71.558401] RSP: 002b:00007fff6f893398 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[   71.566848] RAX: ffffffffffffffda RBX: 000000005b71274d RCX: 00007f9d3e257f10
[   71.574810] RDX: 0000000000000000 RSI: 00007fff6f8933e0 RDI: 0000000000000003
[   71.582770] RBP: 00007fff6f8933e0 R08: 000000000000ffff R09: 0000000000000003
[   71.590729] R10: 00007fff6f892e20 R11: 0000000000000246 R12: 0000000000000000
[   71.598689] R13: 0000000000662ee0 R14: 0000000000000000 R15: 0000000000000000
[   71.606651] Modules linked in: sch_cbq cls_tcindex sch_dsmark xt_CHECKSUM iptable_mangle ipt_MASQUERADE iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_coni
[   71.685425]  libahci i2c_algo_bit i2c_core i40e libata dca mdio megaraid_sas dm_mirror dm_region_hash dm_log dm_mod
[   71.697075] CR2: 0000000000000004
[   71.700792] ---[ end trace f604eb1acacd978b ]---

Reproducer:
tc qdisc add dev lo handle 1:0 root dsmark indices 64 set_tc_index
tc filter add dev lo parent 1:0 protocol ip prio 1 tcindex mask 0xfc shift 2
tc qdisc add dev lo parent 1:0 handle 2:0 cbq bandwidth 10Mbit cell 8 avpkt 1000 mpu 64
tc class add dev lo parent 2:0 classid 2:1 cbq bandwidth 10Mbit rate 1500Kbit avpkt 1000 prio 1 bounded isolated allot 1514 weight 1 maxburst 10
tc filter add dev lo parent 2:0 protocol ip prio 1 handle 0x2e tcindex classid 2:1 pass_on
tc qdisc add dev lo parent 2:1 pfifo limit 5
tc qdisc del dev lo root

This is because in tcindex_set_parms, when there is no old_r, we set new
exts to cr.exts. And we didn't set it to filter when r == &new_filter_result.

Then in tcindex_delete() -> tcf_exts_get_net(), we will get NULL pointer
dereference as we didn't init exts.

Fix it by moving tcf_exts_change() after "if (old_r && old_r != r)" check.
Then we don't need "cr" as there is no errout after that.

Fixes: bf63ac73b3e13 ("net_sched: fix an oops in tcindex filter")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

llc: use refcount_inc_not_zero() for llc_sap_find()

[ Upstream commit 0dcb82254d65f72333aa50ad626d1e9665ad093b ]

llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.

Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.

Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

l2tp: use sk_dst_check() to avoid race on sk->sk_dst_cache

[ Upstream commit 6d37fa49da1e8db8fb1995be22ac837ca41ac8a8 ]

In l2tp code, if it is a L2TP_UDP_ENCAP tunnel, tunnel->sk points to a
UDP socket. User could call sendmsg() on both this tunnel and the UDP
socket itself concurrently. As l2tp_xmit_skb() holds socket lock and call
__sk_dst_check() to refresh sk->sk_dst_cache, while udpv6_sendmsg() is
lockless and call sk_dst_check() to refresh sk->sk_dst_cache, there
could be a race and cause the dst cache to be freed multiple times.
So we fix l2tp side code to always call sk_dst_check() to garantee
xchg() is called when refreshing sk->sk_dst_cache to avoid race
conditions.

Syzkaller reported stack trace:
BUG: KASAN: use-after-free in atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
BUG: KASAN: use-after-free in atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
BUG: KASAN: use-after-free in atomic_add_unless include/linux/atomic.h:597 [inline]
BUG: KASAN: use-after-free in dst_hold_safe include/net/dst.h:308 [inline]
BUG: KASAN: use-after-free in ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
Read of size 4 at addr ffff8801aea9a880 by task syz-executor129/4829

CPU: 0 PID: 4829 Comm: syz-executor129 Not tainted 4.18.0-rc7-next-20180802+ #30
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113
 print_address_description+0x6c/0x20b mm/kasan/report.c:256
 kasan_report_error mm/kasan/report.c:354 [inline]
 kasan_report.cold.7+0x242/0x30d mm/kasan/report.c:412
 check_memory_region_inline mm/kasan/kasan.c:260 [inline]
 check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
 kasan_check_read+0x11/0x20 mm/kasan/kasan.c:272
 atomic_read include/asm-generic/atomic-instrumented.h:21 [inline]
 atomic_fetch_add_unless include/linux/atomic.h:575 [inline]
 atomic_add_unless include/linux/atomic.h:597 [inline]
 dst_hold_safe include/net/dst.h:308 [inline]
 ip6_hold_safe+0xe6/0x670 net/ipv6/route.c:1029
 rt6_get_pcpu_route net/ipv6/route.c:1249 [inline]
 ip6_pol_route+0x354/0xd20 net/ipv6/route.c:1922
 ip6_pol_route_output+0x54/0x70 net/ipv6/route.c:2098
 fib6_rule_lookup+0x283/0x890 net/ipv6/fib6_rules.c:122
 ip6_route_output_flags+0x2c5/0x350 net/ipv6/route.c:2126
 ip6_dst_lookup_tail+0x1278/0x1da0 net/ipv6/ip6_output.c:978
 ip6_dst_lookup_flow+0xc8/0x270 net/ipv6/ip6_output.c:1079
 ip6_sk_dst_lookup_flow+0x5ed/0xc50 net/ipv6/ip6_output.c:1117
 udpv6_sendmsg+0x2163/0x36b0 net/ipv6/udp.c:1354
 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
 sock_sendmsg_nosec net/socket.c:622 [inline]
 sock_sendmsg+0xd5/0x120 net/socket.c:632
 ___sys_sendmsg+0x51d/0x930 net/socket.c:2115
 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2210
 __do_sys_sendmmsg net/socket.c:2239 [inline]
 __se_sys_sendmmsg net/socket.c:2236 [inline]
 __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2236
 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
 entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x446a29
Code: e8 ac b8 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f4de5532db8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133
RAX: ffffffffffffffda RBX: 00000000006dcc38 RCX: 0000000000446a29
RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003
RBP: 00000000006dcc30 R08: 00007f4de5533700 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006dcc3c
R13: 00007ffe2b830fdf R14: 00007f4de55339c0 R15: 0000000000000001

Fixes: 71b1391a4128 ("l2tp: ensure sk->dst is still valid")
Reported-by: syzbot+05f840f3b04f211bad55@syzkaller.appspotmail.com
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Cc: Guillaume Nault <g.nault@alphalink.fr>
Cc: David Ahern <dsahern@gmail.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dccp: fix undefined behavior with 'cwnd' shift in ccid2_cwnd_restart()

[ Upstream commit 61ef4b07fcdc30535889990cf4229766502561cf ]

The shift of 'cwnd' with '(now - hc->tx_lsndtime) / hc->tx_rto' value
can lead to undefined behavior [1].

In order to fix this use a gradual shift of the window with a 'while'
loop, similar to what tcp_cwnd_restart() is doing.

When comparing delta and RTO there is a minor difference between TCP
and DCCP, the last one also invokes dccp_cwnd_restart() and reduces
'cwnd' if delta equals RTO. That case is preserved in this change.

[1]:
[40850.963623] UBSAN: Undefined behaviour in net/dccp/ccids/ccid2.c:237:7
[40851.043858] shift exponent 67 is too large for 32-bit type 'unsigned int'
[40851.127163] CPU: 3 PID: 15940 Comm: netstress Tainted: G        W   E     4.18.0-rc7.x86_64 #1
...
[40851.377176] Call Trace:
[40851.408503]  dump_stack+0xf1/0x17b
[40851.451331]  ? show_regs_print_info+0x5/0x5
[40851.503555]  ubsan_epilogue+0x9/0x7c
[40851.548363]  __ubsan_handle_shift_out_of_bounds+0x25b/0x2b4
[40851.617109]  ? __ubsan_handle_load_invalid_value+0x18f/0x18f
[40851.686796]  ? xfrm4_output_finish+0x80/0x80
[40851.739827]  ? lock_downgrade+0x6d0/0x6d0
[40851.789744]  ? xfrm4_prepare_output+0x160/0x160
[40851.845912]  ? ip_queue_xmit+0x810/0x1db0
[40851.895845]  ? ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40851.963530]  ccid2_hc_tx_packet_sent+0xd36/0x10a0 [dccp]
[40852.029063]  dccp_xmit_packet+0x1d3/0x720 [dccp]
[40852.086254]  dccp_write_xmit+0x116/0x1d0 [dccp]
[40852.142412]  dccp_sendmsg+0x428/0xb20 [dccp]
[40852.195454]  ? inet_dccp_listen+0x200/0x200 [dccp]
[40852.254833]  ? sched_clock+0x5/0x10
[40852.298508]  ? sched_clock+0x5/0x10
[40852.342194]  ? inet_create+0xdf0/0xdf0
[40852.388988]  sock_sendmsg+0xd9/0x160
...

Fixes: 113ced1f52e5 ("dccp ccid-2: Perform congestion-window validation")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.65

x86/speculation/l1tf: Exempt zeroed PTEs from inversion

commit f19f5c49bbc3ffcc9126cc245fc1b24cc29f4a37 upstream.

It turns out that we should *not* invert all not-present mappings,
because the all zeroes case is obviously special.

clear_page() does not undergo the XOR logic to invert the address bits,
i.e. PTE, PMD and PUD entries that have not been individually written
will have val=0 and so will trigger __pte_needs_invert(). As a result,
{pte,pmd,pud}_pfn() will return the wrong PFN value, i.e. all ones
(adjusted by the max PFN mask) instead of zero. A zeroed entry is ok
because the page at physical address 0 is reserved early in boot
specifically to mitigate L1TF, so explicitly exempt them from the
inversion when reading the PFN.

Manifested as an unexpected mprotect(..., PROT_NONE) failure when called
on a VMA that has VM_PFNMAP and was mmap'd to as something other than
PROT_NONE but never used. mprotect() sends the PROT_NONE request down
prot_none_walk(), which walks the PTEs to check the PFNs.
prot_none_pte_entry() gets the bogus PFN from pte_pfn() and returns
-EACCES because it thinks mprotect() is trying to adjust a high MMIO
address.

[ This is a very modified version of Sean's original patch, but all
  credit goes to Sean for doing this and also pointing out that
  sometimes the __pte_needs_invert() function only gets the protection
  bits, not the full eventual pte.  But zero remains special even in
  just protection bits, so that's ok.   - Linus ]

Fixes: f22cc87f6c1f ("x86/speculation/l1tf: Invert all not present mappings")
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.64

x86/mm: Add TLB purge to free pmd/pte page interfaces

commit 5e0fb5df2ee871b841f96f9cb6a7f2784e96aa4e upstream.

ioremap() calls pud_free_pmd_page() / pmd_free_pte_page() when it creates
a pud / pmd map.  The following preconditions are met at their entry.
 - All pte entries for a target pud/pmd address range have been cleared.
 - System-wide TLB purges have been peformed for a target pud/pmd address
   range.

The preconditions assure that there is no stale TLB entry for the range.
Speculation may not cache TLB entries since it requires all levels of page
entries, including ptes, to have P & A-bits set for an associated address.
However, speculation may cache pud/pmd entries (paging-structure caches)
when they have P-bit set.

Add a system-wide TLB purge (INVLPG) to a single page after clearing
pud/pmd entry's P-bit.

SDM 4.10.4.1, Operation that Invalidate TLBs and Paging-Structure Caches,
states that:
  INVLPG invalidates all paging-structure caches associated with the
  current PCID regardless of the liner addresses to which they correspond.

Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: cpandya@codeaurora.org
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-4-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ioremap: Update pgtable free interfaces with addr

commit 785a19f9d1dd8a4ab2d0633be4656653bd3de1fc upstream.

The following kernel panic was observed on ARM64 platform due to a stale
TLB entry.

 1. ioremap with 4K size, a valid pte page table is set.
 2. iounmap it, its pte entry is set to 0.
 3. ioremap the same address with 2M size, update its pmd entry with
    a new value.
 4. CPU may hit an exception because the old pmd entry is still in TLB,
    which leads to a kernel panic.

Commit b6bdb7517c3d ("mm/vmalloc: add interfaces to free unmapped page
table") has addressed this panic by falling to pte mappings in the above
case on ARM64.

To support pmd mappings in all cases, TLB purge needs to be performed
in this case on ARM64.

Add a new arg, 'addr', to pud_free_pmd_page() and pmd_free_pte_page()
so that TLB purge can be added later in seprate patches.

[toshi.kani@hpe.com: merge changes, rewrite patch description]
Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Signed-off-by: Chintan Pandya <cpandya@codeaurora.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-3-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hidp: buffer overflow in hidp_process_report

commit 7992c18810e568b95c869b227137a2215702a805 upstream.

CVE-2018-9363

The buffer length is unsigned at all layers, but gets cast to int and
checked in hidp_process_report and can lead to a buffer overflow.
Switch len parameter to unsigned int to resolve issue.

This affects 3.18 and newer kernels.

Signed-off-by: Mark Salyzyn <salyzyn@android.com>
Fixes: a4b1b5877b514b276f0f31efe02388a9c2836728 ("HID: Bluetooth: hidp: make sure input buffers are big enough")
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: security@kernel.org
Cc: kernel-team@android.com
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: Intel: cht_bsw_max98090_ti: Fix jack initialization

commit 3bbda5a38601f7675a214be2044e41d7749e6c7b upstream.

If the ts3a227e audio accessory detection hardware is present and its
driver probed, the jack needs to be created before enabling jack
detection in the ts3a227e driver. With this patch, the jack is
instantiated in the max98090 headset init function if the ts3a227e is
present. This fixes a null pointer dereference as the jack detection
enabling function in the ts3a driver was called before the jack is
created.

[minor correction to keep error handling on jack creation the same
as before by Pierre Bossart]

Signed-off-by: Thierry Escande <thierry.escande@collabora.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-By: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: msm8916-wcd-digital: fix RX2 MIX1 and RX3 MIX1

commit f53ee247ad546183fc13739adafc5579b9f0ebc0 upstream.

The kcontrol for the third input (rxN_mix1_inp3) of both RX2
and RX3 mixers are not using the correct control register. This simple
patch fixes this.

Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

block, bfq: fix wrong init of saved start time for weight raising

commit 4baa8bb13f41307f3eb62fe91f93a1a798ebef53 upstream.

This commit fixes a bug that causes bfq to fail to guarantee a high
responsiveness on some drives, if there is heavy random read+write I/O
in the background. More precisely, such a failure allowed this bug to
be found [1], but the bug may well cause other yet unreported
anomalies.

BFQ raises the weight of the bfq_queues associated with soft real-time
applications, to privilege the I/O, and thus reduce latency, for these
applications. This mechanism is named soft-real-time weight raising in
BFQ. A soft real-time period may happen to be nested into an
interactive weight raising period, i.e., it may happen that, when a
bfq_queue switches to a soft real-time weight-raised state, the
bfq_queue is already being weight-raised because deemed interactive
too. In this case, BFQ saves in a special variable
wr_start_at_switch_to_srt, the time instant when the interactive
weight-raising period started for the bfq_queue, i.e., the time
instant when BFQ started to deem the bfq_queue interactive. This value
is then used to check whether the interactive weight-raising period
would still be in progress when the soft real-time weight-raising
period ends.  If so, interactive weight raising is restored for the
bfq_queue. This restore is useful, in particular, because it prevents
bfq_queues from losing their interactive weight raising prematurely,
as a consequence of spurious, short-lived soft real-time
weight-raising periods caused by wrong detections as soft real-time.

If, instead, a bfq_queue switches to soft-real-time weight raising
while it *is not* already in an interactive weight-raising period,
then the variable wr_start_at_switch_to_srt has no meaning during the
following soft real-time weight-raising period. Unfortunately the
handling of this case is wrong in BFQ: not only the variable is not
flagged somehow as meaningless, but it is also set to the time when
the switch to soft real-time weight-raising occurs. This may cause an
interactive weight-raising period to be considered mistakenly as still
in progress, and thus a spurious interactive weight-raising period to
start for the bfq_queue, at the end of the soft-real-time
weight-raising period. In particular the spurious interactive
weight-raising period will be considered as still in progress, if the
soft-real-time weight-raising period does not last very long. The
bfq_queue will then be wrongly privileged and, if I/O bound, will
unjustly steal bandwidth to truly interactive or soft real-time
bfq_queues, harming responsiveness and low latency.

This commit fixes this issue by just setting wr_start_at_switch_to_srt
to minus infinity (farthest past time instant according to jiffies
macros): when the soft-real-time weight-raising period ends, certainly
no interactive weight-raising period will be considered as still in
progress.

[1] Background I/O Type: Random - Background I/O mix: Reads and writes
- Application to start: LibreOffice Writer in
http://www.phoronix.com/scan.php?page=news_item&px=Linux-4.13-IO-Laptop

Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Angelo Ruocco <angeloruocco90@gmail.com>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Lee Tibbert <lee.tibbert@gmail.com>
Tested-by: Mirko Montanari <mirkomontanari91@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: sunxi-ng: Fix missing CLK_SET_RATE_PARENT in ccu-sun4i-a10.c

commit a894990ac994a53bc5a0cc694eb12f3c064c18c5 upstream.

When using cpufreq-dt with default govenor other than "performance"
system freezes while booting.
Adding CLK_SET_RATE_PARENT | CLK_IS_CRITICAL to clk_cpu fixes the
problem.

Tested on Cubietruck (A20).

Fixes: c84f5683f6E ("clk: sunxi-ng: Add sun4i/sun7i CCU driver")
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Alexander Syring <alex@asyring.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: rsnd: fix ADG flags

commit b7165d26bf730567ab081bb9383aff82cd43d9ea upstream.

Current ADG driver is over-writing flags. This patch fixes it.

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fw_cfg: fix driver remove

commit 23f1b8d938c861ee0bbb786162f7ce0685f722ec upstream.

On driver remove(), all objects created during probe() should be
removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder
functions to match probe() error cleanup code.

Cc: stable@vger.kernel.org
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/debug: Fix task state recording/printout

commit 3f5fe9fef5b2da06b6319fab8123056da5217c3f upstream.

The recent conversion of the task state recording to use task_state_index()
broke the sched_switch tracepoint task state output.

task_state_index() returns surprisingly an index (0-7) which is then
printed with __print_flags() applying bitmasks. Not really working and
resulting in weird states like 'prev_state=t' instead of 'prev_state=I'.

Use TASK_REPORT_MAX instead of TASK_STATE_MAX to report preemption. Build a
bitmask from the return value of task_state_index() and store it in
entry->prev_state, which makes __print_flags() work as expected.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: stable@vger.kernel.org
Fixes: efb40f588b43 ("sched/tracing: Fix trace_sched_switch task-state printing")
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1711221304180.1751@nanos
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI / APEI: Remove ghes_ioremap_area

commit 520e18a5080d2c444a03280d99c8a35cb667d321 upstream.

Now that nothing is using the ghes_ioremap_area pages, rip them out.

Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Tested-by: Tyler Baicar <tbaicar@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: skcipher - fix crash flushing dcache in error path

commit 8088d3dd4d7c6933a65aa169393b5d88d8065672 upstream.

scatterwalk_done() is only meant to be called after a nonzero number of
bytes have been processed, since scatterwalk_pagedone() will flush the
dcache of the *previous* page.  But in the error case of
skcipher_walk_done(), e.g. if the input wasn't an integer number of
blocks, scatterwalk_done() was actually called after advancing 0 bytes.
This caused a crash ("BUG: unable to handle kernel paging request")
during '!PageSlab(page)' on architectures like arm and arm64 that define
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was
page-aligned as in that case walk->offset == 0.

Fix it by reorganizing skcipher_walk_done() to skip the
scatterwalk_advance() and scatterwalk_done() if an error has occurred.

This bug was found by syzkaller fuzzing.

Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE:

#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>

int main()
{
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "cbc(aes-generic)",
};
char buffer[4096] __attribute__((aligned(4096))) = { 0 };
int fd;

fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16);
fd = accept(fd, NULL, NULL);
write(fd, buffer, 15);
read(fd, buffer, 15);
}

Reported-by: Liu Chao <liuchao741@huawei.com>
Fixes: b286d8b1a690 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: skcipher - fix aligning block size in skcipher_copy_iv()

commit 0567fc9e90b9b1c8dbce8a5468758e6206744d4a upstream.

The ALIGN() macro needs to be passed the alignment, not the alignmask
(which is the alignment minus 1).

Fixes: b286d8b1a690 ("crypto: skcipher - Add skcipher walk interface")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ablkcipher - fix crash flushing dcache in error path

commit 318abdfbe708aaaa652c79fb500e9bd60521f9dc upstream.

Like the skcipher_walk and blkcipher_walk cases:

scatterwalk_done() is only meant to be called after a nonzero number of
bytes have been processed, since scatterwalk_pagedone() will flush the
dcache of the *previous* page.  But in the error case of
ablkcipher_walk_done(), e.g. if the input wasn't an integer number of
blocks, scatterwalk_done() was actually called after advancing 0 bytes.
This caused a crash ("BUG: unable to handle kernel paging request")
during '!PageSlab(page)' on architectures like arm and arm64 that define
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was
page-aligned as in that case walk->offset == 0.

Fix it by reorganizing ablkcipher_walk_done() to skip the
scatterwalk_advance() and scatterwalk_done() if an error has occurred.

Reported-by: Liu Chao <liuchao741@huawei.com>
Fixes: bf06099db18a ("crypto: skcipher - Add ablkcipher_walk interfaces")
Cc: <stable@vger.kernel.org> # v2.6.35+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: blkcipher - fix crash flushing dcache in error path

commit 0868def3e4100591e7a1fdbf3eed1439cc8f7ca3 upstream.

Like the skcipher_walk case:

scatterwalk_done() is only meant to be called after a nonzero number of
bytes have been processed, since scatterwalk_pagedone() will flush the
dcache of the *previous* page.  But in the error case of
blkcipher_walk_done(), e.g. if the input wasn't an integer number of
blocks, scatterwalk_done() was actually called after advancing 0 bytes.
This caused a crash ("BUG: unable to handle kernel paging request")
during '!PageSlab(page)' on architectures like arm and arm64 that define
ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE, provided that the input was
page-aligned as in that case walk->offset == 0.

Fix it by reorganizing blkcipher_walk_done() to skip the
scatterwalk_advance() and scatterwalk_done() if an error has occurred.

This bug was found by syzkaller fuzzing.

Reproducer, assuming ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE:

#include <linux/if_alg.h>
#include <sys/socket.h>
#include <unistd.h>

int main()
{
struct sockaddr_alg addr = {
.salg_type = "skcipher",
.salg_name = "ecb(aes-generic)",
};
char buffer[4096] __attribute__((aligned(4096))) = { 0 };
int fd;

fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, buffer, 16);
fd = accept(fd, NULL, NULL);
write(fd, buffer, 15);
read(fd, buffer, 15);
}

Reported-by: Liu Chao <liuchao741@huawei.com>
Fixes: 5cde0af2a982 ("[CRYPTO] cipher: Added block cipher type")
Cc: <stable@vger.kernel.org> # v2.6.19+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: vmac - separate tfm and request context

commit bb29648102335586e9a66289a1d98a0cb392b6e5 upstream.

syzbot reported a crash in vmac_final() when multiple threads
concurrently use the same "vmac(aes)" transform through AF_ALG.  The bug
is pretty fundamental: the VMAC template doesn't separate per-request
state from per-tfm (per-key) state like the other hash algorithms do,
but rather stores it all in the tfm context.  That's wrong.

Also, vmac_final() incorrectly zeroes most of the state including the
derived keys and cached pseudorandom pad.  Therefore, only the first
VMAC invocation with a given key calculates the correct digest.

Fix these bugs by splitting the per-tfm state from the per-request state
and using the proper init/update/final sequencing for requests.

Reproducer for the crash:

    #include <linux/if_alg.h>
    #include <sys/socket.h>
    #include <unistd.h>

    int main()
    {
            int fd;
            struct sockaddr_alg addr = {
                    .salg_type = "hash",
                    .salg_name = "vmac(aes)",
            };
            char buf[256] = { 0 };

            fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
            bind(fd, (void *)&addr, sizeof(addr));
            setsockopt(fd, SOL_ALG, ALG_SET_KEY, buf, 16);
            fork();
            fd = accept(fd, NULL, NULL);
            for (;;)
                    write(fd, buf, 256);
    }

The immediate cause of the crash is that vmac_ctx_t.partial_size exceeds
VMAC_NHBYTES, causing vmac_final() to memset() a negative length.

Reported-by: syzbot+264bca3a6e8d645550d3@syzkaller.appspotmail.com
Fixes: f1939f7c5645 ("crypto: vmac - New hash algorithm for intel_txt support")
Cc: <stable@vger.kernel.org> # v2.6.32+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: vmac - require a block cipher with 128-bit block size

commit 73bf20ef3df262026c3470241ae4ac8196943ffa upstream.

The VMAC template assumes the block cipher has a 128-bit block size, but
it failed to check for that.  Thus it was possible to instantiate it
using a 64-bit block size cipher, e.g. "vmac(cast5)", causing
uninitialized memory to be used.

Add the needed check when instantiating the template.

Fixes: f1939f7c5645 ("crypto: vmac - New hash algorithm for intel_txt support")
Cc: <stable@vger.kernel.org> # v2.6.32+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: x86/sha256-mb - fix digest copy in sha256_mb_mgr_get_comp_job_avx2()

commit af839b4e546613aed1fbd64def73956aa98631e7 upstream.

There is a copy-paste error where sha256_mb_mgr_get_comp_job_avx2()
copies the SHA-256 digest state from sha256_mb_mgr::args::digest to
job_sha256::result_digest.  Consequently, the sha256_mb algorithm
sometimes calculates the wrong digest.  Fix it.

Reproducer using AF_ALG:

    #include <assert.h>
    #include <linux/if_alg.h>
    #include <stdio.h>
    #include <string.h>
    #include <sys/socket.h>
    #include <unistd.h>

    static const __u8 expected[32] =
        "\xad\x7f\xac\xb2\x58\x6f\xc6\xe9\x66\xc0\x04\xd7\xd1\xd1\x6b\x02"
        "\x4f\x58\x05\xff\x7c\xb4\x7c\x7a\x85\xda\xbd\x8b\x48\x89\x2c\xa7";

    int main()
    {
        int fd;
        struct sockaddr_alg addr = {
            .salg_type = "hash",
            .salg_name = "sha256_mb",
        };
        __u8 data[4096] = { 0 };
        __u8 digest[32];
        int ret;
        int i;

        fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
        bind(fd, (void *)&addr, sizeof(addr));
        fork();
        fd = accept(fd, 0, 0);
        do {
            ret = write(fd, data, 4096);
            assert(ret == 4096);
            ret = read(fd, digest, 32);
            assert(ret == 32);
        } while (memcmp(digest, expected, 32) == 0);

        printf("wrong digest: ");
        for (i = 0; i < 32; i++)
            printf("%02x", digest[i]);
        printf("\n");
    }

Output was:

    wrong digest: ad7facb2000000000000000000000000ffffffef7cb47c7a85dabd8b48892ca7

Fixes: 172b1d6b5a93 ("crypto: sha256-mb - fix ctx pointer and digest copy")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kbuild: verify that $DEPMOD is installed

commit 934193a654c1f4d0643ddbf4b2529b508cae926e upstream.

Verify that 'depmod' ($DEPMOD) is installed.
This is a partial revert of commit 620c231c7a7f
("kbuild: do not check for ancient modutils tools").

Also update Documentation/process/changes.rst to refer to
kmod instead of module-init-tools.

Fixes kernel bugzilla #198965:
https://bugzilla.kernel.org/show_bug.cgi?id=198965

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Lucas De Marchi <lucas.de.marchi@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Chih-Wei Huang <cwhuang@linux.org.tw>
Cc: stable@vger.kernel.org # any kernel since 2012
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm: Disable ioremap free page handling on x86-PAE

commit f967db0b9ed44ec3057a28f3b28efc51df51b835 upstream.

ioremap() supports pmd mappings on x86-PAE.  However, kernel's pmd
tables are not shared among processes on x86-PAE.  Therefore, any
update to sync'd pmd entries need re-syncing.  Freeing a pte page
also leads to a vmalloc fault and hits the BUG_ON in vmalloc_sync_one().

Disable free page handling on x86-PAE.  pud_free_pmd_page() and
pmd_free_pte_page() simply return 0 if a given pud/pmd entry is present.
This assures that ioremap() does not update sync'd pmd entries at the
cost of falling back to pte mappings.

Fixes: 28ee90fe6048 ("x86/mm: implement free pmd/pte page interfaces")
Reported-by: Joerg Roedel <joro@8bytes.org>
Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: mhocko@suse.com
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: cpandya@codeaurora.org
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: stable@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20180627141348.21777-2-toshi.kani@hpe.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: i8259: Add missing include file

commit 0a957467c5fd46142bc9c52758ffc552d4c5e2f7 upstream.

i8259.h uses inb/outb and thus needs to include asm/io.h to avoid the
following build error, as seen with x86_64:defconfig and CONFIG_SMP=n.

  In file included from drivers/rtc/rtc-cmos.c:45:0:
  arch/x86/include/asm/i8259.h: In function 'inb_pic':
  arch/x86/include/asm/i8259.h:32:24: error:
implicit declaration of function 'inb'

  arch/x86/include/asm/i8259.h: In function 'outb_pic':
  arch/x86/include/asm/i8259.h:45:2: error:
implicit declaration of function 'outb'

Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Suggested-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Fixes: 447ae3166702 ("x86: Don't include linux/irq.h from asm/hardirq.h")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/l1tf: Fix build error seen if CONFIG_KVM_INTEL is disabled

commit 1eb46908b35dfbac0ec1848d4b1e39667e0187e9 upstream.

allmodconfig+CONFIG_INTEL_KVM=n results in the following build error.

  ERROR: "l1tf_vmx_mitigation" [arch/x86/kvm/kvm.ko] undefined!

Fixes: 5b76a3cff011 ("KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry")
Reported-by: Meelis Roos <mroos@linux.ee>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 4.14.63

x86/CPU/AMD: Have smp_num_siblings and cpu_llc_id always be present

commit f8b64d08dde2714c62751d18ba77f4aeceb161d3 upstream.

Move smp_num_siblings and cpu_llc_id to cpu/common.c so that they're
always present as symbols and not only in the CONFIG_SMP case. Then,
other code using them doesn't need ugly ifdeffery anymore. Get rid of
some ifdeffery.

Signed-off-by: Borislav Petkov <bpetkov@suse.de>
Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1524864877-111962-2-git-send-email-suravee.suthikulpanit@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Unbreak !__HAVE_ARCH_PFN_MODIFY_ALLOWED architectures

commit 6c26fcd2abfe0a56bbd95271fce02df2896cfd24 upstream.

pfn_modify_allowed() and arch_has_pfn_modify_check() are outside of the
!__ASSEMBLY__ section in include/asm-generic/pgtable.h, which confuses
assembler on archs that don't have __HAVE_ARCH_PFN_MODIFY_ALLOWED (e.g.
ia64) and breaks build:

    include/asm-generic/pgtable.h: Assembler messages:
    include/asm-generic/pgtable.h:538: Error: Unknown opcode `static inline bool pfn_modify_allowed(unsigned long pfn,pgprot_t prot)'
    include/asm-generic/pgtable.h:540: Error: Unknown opcode `return true'
    include/asm-generic/pgtable.h:543: Error: Unknown opcode `static inline bool arch_has_pfn_modify_check(void)'
    include/asm-generic/pgtable.h:545: Error: Unknown opcode `return false'
    arch/ia64/kernel/entry.S:69: Error: `mov' does not fit into bundle

Move those two static inlines into the !__ASSEMBLY__ section so that they
don't confuse the asm build pass.

Fixes: 42e4089c7890 ("x86/speculation/l1tf: Disallow non privileged high MMIO PROT_NONE mappings")
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/init: fix build with CONFIG_SWAP=n

commit 792adb90fa724ce07c0171cbc96b9215af4b1045 upstream.

The introduction of generic_max_swapfile_size and arch-specific versions has
broken linking on x86 with CONFIG_SWAP=n due to undefined reference to
'generic_max_swapfile_size'. Fix it by compiling the x86-specific
max_swapfile_size() only with CONFIG_SWAP=y.

Reported-by: Tomas Pruzina <pruzinat@gmail.com>
Fixes: 377eeaa8e11f ("x86/speculation/l1tf: Limit swap file size to MAX_PA/2")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpu/hotplug: Non-SMP machines do not make use of booted_once

commit 269777aa530f3438ec1781586cdac0b5fe47b061 upstream.

Commit 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
breaks non-SMP builds.

[ I suspect the 'bool' fields should just be made to be bitfields and be
  exposed regardless of configuration, but that's a separate cleanup
  that I'll leave to the owners of this file for later.   - Linus ]

Fixes: 0cc3cd21657b ("cpu/hotplug: Boot HT siblings at least once")
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Abel Vesa <abelvesa@linux.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/smp: fix non-SMP broken build due to redefinition of apic_id_is_primary_thread

commit d0055f351e647f33f3b0329bff022213bf8aa085 upstream.

The function has an inline "return false;" definition with CONFIG_SMP=n
but the "real" definition is also visible leading to "redefinition of
‘apic_id_is_primary_thread’" compiler error.

Guard it with #ifdef CONFIG_SMP

Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Fixes: 6a4d2657e048 ("x86/smp: Provide topology_is_primary_thread()")
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/microcode: Allow late microcode loading with SMT disabled

commit 07d981ad4cf1e78361c6db1c28ee5ba105f96cc1 upstream

The kernel unnecessarily prevents late microcode loading when SMT is
disabled.  It should be safe to allow it if all the primary threads are
online.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Borislav Petkov <bp@suse.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools headers: Synchronise x86 cpufeatures.h for L1TF additions

commit e24f14b0ff985f3e09e573ba1134bfdf42987e05 upstream

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/kmmio: Make the tracer robust against L1TF

commit 1063711b57393c1999248cccb57bebfaf16739e7 upstream

The mmio tracer sets io mapping PTEs and PMDs to non present when enabled
without inverting the address bits, which makes the PTE entry vulnerable
for L1TF.

Make it use the right low level macros to actually invert the address bits
to protect against L1TF.

In principle this could be avoided because MMIO tracing is not likely to be
enabled on production machines, but the fix is straigt forward and for
consistency sake it's better to get rid of the open coded PTE manipulation.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/mm/pat: Make set_memory_np() L1TF safe

commit 958f79b9ee55dfaf00c8106ed1c22a2919e0028b upstream

set_memory_np() is used to mark kernel mappings not present, but it has
it's own open coded mechanism which does not have the L1TF protection of
inverting the address bits.

Replace the open coded PTE manipulation with the L1TF protecting low level
PTE routines.

Passes the CPA self test.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Make pmd/pud_mknotpresent() invert

commit 0768f91530ff46683e0b372df14fd79fe8d156e5 upstream

Some cases in THP like:
  - MADV_FREE
  - mprotect
  - split

mark the PMD non present for temporarily to prevent races. The window for
an L1TF attack in these contexts is very small, but it wants to be fixed
for correctness sake.

Use the proper low level functions for pmd/pud_mknotpresent() to address
this.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/l1tf: Invert all not present mappings

commit f22cc87f6c1f771b57c407555cfefd811cdd9507 upstream

For kernel mappings PAGE_PROTNONE is not necessarily set for a non present
mapping, but the inversion logic explicitely checks for !PRESENT and
PROT_NONE.

Remove the PROT_NONE check and make the inversion unconditional for all not
present mappings.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cpu/hotplug: Fix SMT supported evaluation

commit bc2d8d262cba5736332cbc866acb11b1c5748aa9 upstream

Josh reported that the late SMT evaluation in cpu_smt_state_init() sets
cpu_smt_control to CPU_SMT_NOT_SUPPORTED in case that 'nosmt' was supplied
on the kernel command line as it cannot differentiate between SMT disabled
by BIOS and SMT soft disable via 'nosmt'. That wreckages the state and
makes the sysfs interface unusable.

Rework this so that during bringup of the non boot CPUs the availability of
SMT is determined in cpu_smt_allowed(). If a newly booted CPU is not a
'primary' thread then set the local cpu_smt_available marker and evaluate
this explicitely right after the initial SMP bringup has finished.

SMT evaulation on x86 is a trainwreck as the firmware has all the
information _before_ booting the kernel, but there is no interface to query
it.

Fixes: 73d5e2b47264 ("cpu/hotplug: detect SMT disabled by BIOS")
Reported-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Tell the nested hypervisor to skip L1D flush on vmentry

commit 5b76a3cff011df2dcb6186c965a2e4d809a05ad4 upstream

When nested virtualization is in use, VMENTER operations from the nested
hypervisor into the nested guest will always be processed by the bare metal
hypervisor, and KVM's "conditional cache flushes" mode in particular does a
flush on nested vmentry.  Therefore, include the "skip L1D flush on
vmentry" bit in KVM's suggested ARCH_CAPABILITIES setting.

Add the relevant Documentation.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Use ARCH_CAPABILITIES to skip L1D flush on vmentry

commit 8e0b2b916662e09dd4d09e5271cdf214c6b80e62 upstream

Bit 3 of ARCH_CAPABILITIES tells a hypervisor that L1D flush on vmentry is
not needed.  Add a new value to enum vmx_l1d_flush_state, which is used
either if there is no L1TF bug at all, or if bit 3 is set in ARCH_CAPABILITIES.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation: Simplify sysfs report of VMX L1TF vulnerability

commit ea156d192f5257a5bf393d33910d3b481bf8a401 upstream

Three changes to the content of the sysfs file:

 - If EPT is disabled, L1TF cannot be exploited even across threads on the
   same core, and SMT is irrelevant.

 - If mitigation is completely disabled, and SMT is enabled, print "vulnerable"
   instead of "vulnerable, SMT vulnerable"

 - Reorder the two parts so that the main vulnerability state comes first
   and the detail on SMT is second.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: support MSR_IA32_ARCH_CAPABILITIES as a feature MSR

commit cd28325249a1ca0d771557ce823e0308ad629f98 upstream

This lets userspace read the MSR_IA32_ARCH_CAPABILITIES and check that all
requested features are available on the host.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Allow userspace to define the microcode version

commit 518e7b94817abed94becfe6a44f1ece0d4745afe upstream

Linux (among the others) has checks to make sure that certain features
aren't enabled on a certain family/model/stepping if the microcode version
isn't greater than or equal to a known good version.

By exposing the real microcode version, we're preventing buggy guests that
don't check that they are running virtualized (i.e., they should trust the
hypervisor) from disabling features that are effectively not buggy.

Suggested-by: Filippo Sironi <sironi@amazon.de>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: X86: Introduce kvm_get_msr_feature()

commit 66421c1ec340096b291af763ed5721314cdd9c5c upstream

Introduce kvm_get_msr_feature() to handle the msrs which are supported
by different vendors and sharing the same emulation logic.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Liran Alon <liran.alon@oracle.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: SVM: Add MSR-based feature support for serializing LFENCE

commit d1d93fa90f1afa926cb060b7f78ab01a65705b4d upstream

In order to determine if LFENCE is a serializing instruction on AMD
processors, MSR 0xc0011029 (MSR_F10H_DECFG) must be read and the state
of bit 1 checked.  This patch will add support to allow a guest to
properly make this determination.

Add the MSR feature callback operation to svm.c and add MSR 0xc0011029
to the list of MSR-based features.  If LFENCE is serializing, then the
feature is supported, allowing the hypervisor to set the value of the
MSR that guest will see.  Support is also added to write (hypervisor only)
and read the MSR value for the guest.  A write by the guest will result in
a #GP.  A read by the guest will return the value as set by the host.  In
this way, the support to expose the feature to the guest is controlled by
the hypervisor.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Add a framework for supporting MSR-based features

commit 801e459a6f3a63af9d447e6249088c76ae16efc4 upstream

Provide a new KVM capability that allows bits within MSRs to be recognized
as features.  Two new ioctls are added to the /dev/kvm ioctl routine to
retrieve the list of these MSRs and then retrieve their values. A kvm_x86_ops
callback is used to determine support for the listed MSR-based features.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[Tweaked documentation. - Radim]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/l1tf: Remove Yonah processors from not vulnerable list

commit 58331136136935c631c2b5f06daf4c3006416e91 upstream

Dave reported, that it's not confirmed that Yonah processors are
unaffected. Remove them from the list.

Reported-by: ave Hansen <dave.hansen@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/KVM/VMX: Don't set l1tf_flush_l1d from vmx_handle_external_intr()

commit 18b57ce2eb8c8b9a24174a89250cf5f57c76ecdc upstream

For VMEXITs caused by external interrupts, vmx_handle_external_intr()
indirectly calls into the interrupt handlers through the host's IDT.

It follows that these interrupts get accounted for in the
kvm_cpu_l1tf_flush_l1d per-cpu flag.

The subsequently executed vmx_l1d_flush() will thus be aware that some
interrupts have happened and conduct a L1d flush anyway.

Setting l1tf_flush_l1d from vmx_handle_external_intr() isn't needed
anymore. Drop it.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/irq: Let interrupt handlers set kvm_cpu_l1tf_flush_l1d

commit ffcba43ff66c7dab34ec700debd491d2a4d319b4 upstream

The last missing piece to having vmx_l1d_flush() take interrupts after
VMEXIT into account is to set the kvm_cpu_l1tf_flush_l1d per-cpu flag on
irq entry.

Issue calls to kvm_set_cpu_l1tf_flush_l1d() from entering_irq(),
ipi_entering_ack_irq(), smp_reschedule_interrupt() and
uv_bau_message_interrupt().

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86: Don't include linux/irq.h from asm/hardirq.h

commit 447ae316670230d7d29430e2cbf1f5db4f49d14c upstream

The next patch in this series will have to make the definition of
irq_cpustat_t available to entering_irq().

Inclusion of asm/hardirq.h into asm/apic.h would cause circular header
dependencies like

  asm/smp.h
    asm/apic.h
      asm/hardirq.h
        linux/irq.h
          linux/topology.h
            linux/smp.h
              asm/smp.h

or

  linux/gfp.h
    linux/mmzone.h
      asm/mmzone.h
        asm/mmzone_64.h
          asm/smp.h
            asm/apic.h
              asm/hardirq.h
                linux/irq.h
                  linux/irqdesc.h
                    linux/kobject.h
                      linux/sysfs.h
                        linux/kernfs.h
                          linux/idr.h
                            linux/gfp.h

and others.

This causes compilation errors because of the header guards becoming
effective in the second inclusion: symbols/macros that had been defined
before wouldn't be available to intermediate headers in the #include chain
anymore.

A possible workaround would be to move the definition of irq_cpustat_t
into its own header and include that from both, asm/hardirq.h and
asm/apic.h.

However, this wouldn't solve the real problem, namely asm/harirq.h
unnecessarily pulling in all the linux/irq.h cruft: nothing in
asm/hardirq.h itself requires it. Also, note that there are some other
archs, like e.g. arm64, which don't have that #include in their
asm/hardirq.h.

Remove the linux/irq.h #include from x86' asm/hardirq.h.

Fix resulting compilation errors by adding appropriate #includes to *.c
files as needed.

Note that some of these *.c files could be cleaned up a bit wrt. to their
set of #includes, but that should better be done from separate patches, if
at all.

Signed-off-by: Nicolai Stange <nstange@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>