kele bai [Fri, 16 Mar 2018 02:26:57 +0000 (10:26 +0800)]
di: disable recycle buffer when source switch
PD#160047: di: disable recycle buffer when source switch
1) atv&dtv will switch when channel switch,
mirror function need enable
2) disable full pack feature for 8 bit mode
Change-Id: Ifde5afb637b259c0d4d789b94228c0cb488b48f7
Signed-off-by: kele bai <kele.bai@amlogic.com>
Yi Zeng [Mon, 12 Mar 2018 07:38:55 +0000 (15:38 +0800)]
mtd: add a macro to hide the env region in rsv zone
PD#160529: mtd: add a macro to hide the env region in rsv zone
when we save the env data in normal partition, the env region
in the rsv zone is no needed anymore, so hide it with a macro.
Change-Id: Id1b92079d1127ffabf4c1f208b486daad0af3934
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Jianxin Pan [Sun, 18 Mar 2018 03:06:44 +0000 (20:06 -0700)]
Merge "mtd: rebuild the code about add partition" into amlogic-4.9-dev
Xing Wang [Thu, 15 Mar 2018 07:19:40 +0000 (15:19 +0800)]
audio: auge: add i2s to hdmix port
PD#161826: audio: auge: add i2s to hdmix port
Change-Id: I0aca7160342810385ea0e531ab8fe31c948a80b6
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Yue Wang [Thu, 15 Mar 2018 02:28:35 +0000 (10:28 +0800)]
usb: gadget: ffs: Execute copy_to_user() with USER_DS set
PD#161764: usb: gadget: ffs: Execute copy_to_user() with USER_DS set
When using a AIO read() operation on the function FS gadget driver a URB is
submitted asynchronously and on URB completion the received data is copied
to the userspace buffer associated with the read operation.
This is done from a kernel worker thread invoking copy_to_user() (through
copy_to_iter()). And while the user space process memory is made available
to the kernel thread using use_mm(), some architecture require in addition
to this that the operation runs with USER_DS set. Otherwise the userspace
memory access will fail.
For example on ARM64 with Privileged Access Never (PAN) and User Access
Override (UAO) enabled the following crash occurs.
Address this by placing a set_fs(USER_DS) before of the copy operation
and revert it again once the copy operation has finished.
Change-Id: If523dac82905057607d3007de6a3974102d51e3f
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Brian Zhu [Sun, 11 Mar 2018 10:50:36 +0000 (18:50 +0800)]
vpp: disable pps as default when scaler ratio is 1:1
PD#161937: vpp: disable pps as default when scaler ratio is 1:1
Change-Id: Iabec01db371218c954bfdae25dfea5292acae3e2
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Zongdong Jiao [Mon, 12 Mar 2018 13:56:27 +0000 (21:56 +0800)]
hdmitx: update phy/clk parameters
PD#160984: hdmitx: update phy/clk parameters of g12a
1. use 5.94G instead of 2.97G to get high performance
2. add workaround of setting 4.5~6GHz
3. fine tune phy parameters
Change-Id: I99a7bb428e835316bd464aae421e074841156670
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jian Hu [Wed, 14 Mar 2018 09:43:16 +0000 (17:43 +0800)]
i2c: fix writing w_token reg error
PD#161535: i2c: fix writing w_token reg error
1.fix writing w_token reg error
2.set default clock frequency 100khz
3.config i2c1 pinmux and change clock frequency to 300k
Change-Id: I9b3fe3ed404255e3897d7353c57770a6019e6f9b
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Yi Zhou [Tue, 16 Jan 2018 06:03:58 +0000 (14:03 +0800)]
hdmitx: add hdmitx driver in drm
PD#156257: hdmitx: add hdmitx driver in drm
1.add irq
2.add edid reading
3.set hdmi mode
4.update drm_edid.c
5.modify vout api
Change-Id: I7a6666c4884655e168dd5125c9d1eb1f6ecb7587
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Evoke Zhang [Tue, 16 Jan 2018 10:42:47 +0000 (18:42 +0800)]
drm: add drm driver lcd support
PD#160546: add drm driver lcd support
Change-Id: I3b5fa4c10b4ac542ccdfa8691e692e849f071145
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zhuo Wang [Tue, 13 Mar 2018 08:29:10 +0000 (16:29 +0800)]
ethernet: add suspend and resume function with DS=3
PD#162078: suspend and resume code
Change-Id: I57d0582b4df5f4129b60c7e885022778b1f4c98c
Signed-off-by: Zhuo Wang <zhuo.wang@amlogic.com>
zhilei.wu [Tue, 13 Mar 2018 13:05:16 +0000 (21:05 +0800)]
dv: enable 4.9 dolby vision driver for ko crash
PD#157605: dv: enable 4.9 dolby vision driver for ko crash
Change-Id: I2559e02d161f8a0aea3a98e85f8d6cb1529203a8
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
pengcheng chen [Wed, 14 Mar 2018 09:33:45 +0000 (17:33 +0800)]
ion_dev: enlarge cam heap size .[1/1]
PD#153134: some dEQP cases should always use direct render
Change-Id: I9bcde1632d27674e065771a2871e6e1bb193cb07
Signed-off-by: Sandy Luo <sandy.luo@amlogic.com>
Yi Zeng [Wed, 14 Mar 2018 03:31:09 +0000 (11:31 +0800)]
mtd: rebuild the code about add partition
PD#161968: rebuild the code about add partition
rebuild the code about add partition process, and
add a macro to constraint skip bad blocks when counting.
Change-Id: I893afec2f76d5d3c8fb4c7859b72828612c867d2
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Evoke Zhang [Fri, 9 Mar 2018 06:54:30 +0000 (14:54 +0800)]
vout: add vpu_clkc clktree management function for display2
PD#156734: vout: add vpu_clkc clktree management function for display2
Change-Id: I71f6d73cff9d7df2d7c8507f5f37b9d6d583286d
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
zhilei.wu [Tue, 13 Mar 2018 08:21:52 +0000 (16:21 +0800)]
dv: revised g12 VPP_DOLBY_CTRL[0] same as txlx
PD#161251: dv: revised g12 VPP_DOLBY_CTRL[0] same as txlx
Change-Id: I0b73f19e273e248a89a6cf3b2f45d6cfe1366da2
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
jie.yuan [Tue, 6 Feb 2018 07:59:08 +0000 (15:59 +0800)]
dts: enable pstore to fix CtsLiblogTestCases [1/1]
PD#160700: enable pstore for gxl_p23 and txlx_t962e_r321
fix libc#__pstore_append
Change-Id: Ie4ddd90c4e42f4a4d778ba4d72cd51b672f1857d
Signed-off-by: jie.yuan <jie.yuan@amlogic.com>
Jiamin Ma [Tue, 13 Mar 2018 07:32:32 +0000 (15:32 +0800)]
log_msg: too much logging messages for topology
PD#138714: lowering log level to debug for cpu_cluster_energy and
cpu_core_energy and disabling their logging by default
Change-Id: Ie515d892aa4ff0c77a5393c1b9f67b4f0c463b3e
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
wenfeng.guo [Mon, 12 Mar 2018 07:14:53 +0000 (15:14 +0800)]
amvecm: fix DNLP node doesn't work when play local 4k viedo
PD#161992: amvecm: fix DNLP node doesn't work when play local 4k viedo
Change-Id: I38228ebf18127335529e2bca1679f5bb98d22863
Signed-off-by: wenfeng.guo <wenfeng.guo@amlogic.com>
Weiming Liu [Fri, 9 Mar 2018 08:24:57 +0000 (16:24 +0800)]
lcd: fix lcd_resume without panel display mode mistake
PD#156734: lcd: fix lcd_resume without panel display mode mistake
Change-Id: I2f41dba8fd777cf6748a3b3fe7f2b7922a12591d
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
Yi Zhou [Fri, 2 Mar 2018 08:38:20 +0000 (16:38 +0800)]
hdmitx: add colorimetry feature to vpp
PD#161350: hdmitx: add colorimetry feature to vpp
Some special TVs just define HDR static Metadata,but don't
define colorimetry block. Therefore, hdmitx should use
another feature to accurately indicate HDR function
Change-Id: I8d9a9243c2e0fbcf8c938625aa8d2a20b1441a1b
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Yi Zhou [Mon, 12 Mar 2018 10:39:56 +0000 (18:39 +0800)]
hdmitx: add EMP (any packets) function
PD#156734: add EMP (any packets) function for test
The function is only used to test now. The details need to
be discussed in the feature.
method:
echo emp > /sys/class/amhdmitx/amhdmitx0/config
Change-Id: I73cf93d90c9247336340fdc36ae8779743dc262d
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Nian Jing [Tue, 6 Mar 2018 08:48:28 +0000 (16:48 +0800)]
cvbs: add clk path select
PD#156734: add clk path select
0: vid_pll vid2_clk (default)
1: gp0_pll vid2_clk
2: vid_pll vid1_clk
3: gp0_pll vid1_clk
use below command to change clk path:
echo set_clkpath 1 >/sys/class/cvbs/debug
Change-Id: Ib0e2e9dd284f1b103c945602050ba91737537037
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Yicheng Shen [Mon, 12 Mar 2018 06:30:51 +0000 (14:30 +0800)]
hdmirx: optimize errorcable handle in PHY EQ algorithm
PD#161977: optimize errorcable handle in PHY EQ algorithm
Change-Id: I4e0f2884f64ac7818198504f7592b558985b5512
Signed-off-by: Yicheng Shen <yicheng.shen@amlogic.com>
Yi Zhou [Fri, 9 Mar 2018 10:41:25 +0000 (18:41 +0800)]
hdmitx: remove 5v close/open operation
PD#156734: remove 5v close/open operation
Change-Id: I8c4b4b892f0093081ef8ee2f007146f8dbde3897
Signed-off-by: Yi Zhou <yi.zhou@amlogic.com>
Peipeng Zhao [Wed, 28 Feb 2018 09:17:49 +0000 (17:17 +0800)]
sound: fixed microphone detect crash error
PD#161229: sound: fixed microphone detect crash error
Change-Id: If84c694275c68761a0844bcb3dcae797f2b9a4fd
Signed-off-by: Peipeng Zhao <peipeng.zhao@amlogic.com>
Evoke Zhang [Wed, 7 Mar 2018 03:21:34 +0000 (11:21 +0800)]
p241: dts: fix cvbsout & vdac config mistake
PD#161357: p241: dts: fix cvbsout & vdac config mistake
Change-Id: Iff6c1ec0aec505a0e93ba2302a3c9ee419b23de5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hong Guo [Fri, 9 Mar 2018 11:51:58 +0000 (19:51 +0800)]
PM/sleep: modify register's dts format for suspend.
PD#156734: PM/sleep: modify register's dts format for suspend.
Change-Id: I8dd1f8927e3d5b2d0f815e732dc0c436ffd2fde9
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Zongdong Jiao [Thu, 8 Mar 2018 09:05:25 +0000 (17:05 +0800)]
hdmitx: fix wrong kmalloc usage
PD#161652: fix wrong kmailloc(, GFP_KERNEL) usage
At timer function. System will throw
[<
ffffff800908a0d8>] dump_backtrace+0x0/0x1d0
[<
ffffff800908a2cc>] show_stack+0x24/0x30
[<
ffffff8009465c60>] dump_stack+0x90/0xb0
[<
ffffff80090cc2e4>] ___might_sleep+0x14c/0x1a0
[<
ffffff80090cc394>] __might_sleep+0x5c/0x98
[<
ffffff80091e4ecc>] kmem_cache_alloc_trace+0x1ec/0x238
[<
ffffff800979d18c>] hdcptx_events_handle+0x45c/0x640
[<
ffffff800911193c>] call_timer_fn+0x3c/0x1b0
[<
ffffff8009111bb8>] expire_timers+0xd8/0x178
[<
ffffff8009111cec>] run_timer_softirq+0x94/0x178
[<
ffffff800908183c>] __do_softirq+0x12c/0x344
[<
ffffff80090a5344>] irq_exit+0xa4/0xd0
[<
ffffff80090fc8d8>] __handle_domain_irq+0x90/0x100
[<
ffffff800908154c>] gic_handle_irq+0x5c/0xb0
Should use GFP_ATOMIC instead.
Change-Id: I70778a6e3d993d87f71be208503688286913bda1
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Ao Xu [Wed, 7 Feb 2018 08:23:04 +0000 (16:23 +0800)]
workqueue: avoid process_one_work NULL reference
PD#158184: avoid process_one_work NULL reference
avoid process_one_work NULL reference
Change-Id: I96d9477b804e079e18663d8f80d714ed9fbbd642
Signed-off-by: Ao Xu <ao.xu@amlogic.com>
Yue Wang [Fri, 9 Mar 2018 09:37:56 +0000 (17:37 +0800)]
usb: enable usb3.0 for s905d2_u200
PD#156734: usb: enable usn3.0 for s905d2_u200
Change-Id: I284a09ef192a23a844287ebf514b266f0662ccd6
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Jiyu Yang [Mon, 22 Jan 2018 06:11:01 +0000 (14:11 +0800)]
dts: fixed hiu bus addr [2/2]
PD#159303: this may cause the suspend to ram crash at mali modules
Change-Id: I57a9a83306a4f04619e5c0ebfd0bf5ab15dcb804
Signed-off-by: Jiyu Yang <Jiyu.Yang@amlogic.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Brian zhu [Fri, 9 Mar 2018 08:50:54 +0000 (00:50 -0800)]
Revert "vpp: disable pps as default when scaler ratio is 1:1"
This reverts commit
3f03850cd9ad28a2e56d986d991a8868bb34b4f5.
Change-Id: I9a760c8b3819728c9cab71a4526acc91538c99e0
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
qi duan [Tue, 6 Mar 2018 10:06:15 +0000 (18:06 +0800)]
USB: PCD: fix setup packet count issue
PD#161573: USB: PCD: fix setup packet count issue.
merge from dwc_otg version3.30a
Change-Id: I636129dfadc0b28e04d09df771aa062ee73670fa
Signed-off-by: qi duan <qi.duan@amlogic.com>
jianxin.pan [Thu, 8 Mar 2018 09:19:11 +0000 (17:19 +0800)]
dts: g12a: add s905d2_u200 and s905y2_u221
PD#156734: add s905d2_u200 and s905y2_u221 for g12a
1. rename g12a_skt.dts to g12a_s905d2_u200.dts
2. cp g12a_dts.dts to g12a_s905d2_skt.dts, and change caps and
f_max for sd_emmc_a
3. cp g12a_skt_buidroot.dts to g12a_s905d2_skt_buildroot.dts, and
change caps and f_max for sd_emmc_a
4. cp g12a_skt.dts to g12a_s905y2_u221.dts, disable ethmac
5. cp g12a_skt.dts to g12a_s905y2_u211.dts
6. set f_max for sd_emmc_c to
50000000
Change-Id: Iffbeffc6dd730cff1c5ac371e237edcc8354b042
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
Hong Guo [Thu, 8 Mar 2018 05:32:10 +0000 (13:32 +0800)]
SUSPEND: enable supspend function.
PD#156734: suspend: enable supspend function.
Change-Id: I20d62c97147298617cc3c11b3a0ff878bff5f034
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Evoke Zhang [Thu, 8 Mar 2018 06:59:49 +0000 (14:59 +0800)]
vout: optimize display mode changing flow
PD#161389: vout: optimize display mode changing flow
Change-Id: I29fadc879d1915917ffe19e3a4fa08ae36f36fd8
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Yue Wang [Thu, 8 Mar 2018 10:23:06 +0000 (18:23 +0800)]
usb: fix adb aio buffer panic.
PD#161764: usb: fix adb aio buffer panic.
Change-Id: I32d2c45e28f09489f3f53d2935ab0cd1d7992ed0
Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Kaifu Hu [Wed, 7 Feb 2018 12:05:07 +0000 (20:05 +0800)]
hdmitx: fix VSDB parsing error
PD#160588: hdmitx: fix VSDB parsing error
Fix EDID VSDB parsing error.
Change-Id: Idbc7e4c801f032583004ee7d4e3b9e0decf44074
Signed-off-by: Kaifu Hu <kaifu.hu@amlogic.com>
Nian Jing [Tue, 6 Mar 2018 11:29:30 +0000 (19:29 +0800)]
avin: fix disable detect abnormal
PD#161181: fix abnormal when disable detect
Change-Id: I946f6485d047630109665239c5e156a7f261cd47
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
kele bai [Wed, 7 Mar 2018 10:48:07 +0000 (18:48 +0800)]
di: fix mirror buffer recycle error cause crash
PD#160504: di: fix keep buffer pointer error
1) fix keep buffer pointer error for seek case
Change-Id: I9ad34b86f6cc3c9a5cd5840571346bf180e45c39
Signed-off-by: kele bai <kele.bai@amlogic.com>
Nanxin Qin [Tue, 6 Mar 2018 08:18:46 +0000 (16:18 +0800)]
media: fixes an issue where the CTS cause the kernel crash
PD#161202: recycles the vf data before must to be checked.
Change-Id: Ief413c5169d859be632f4799d6897ae1322e2fbb
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Nanxin Qin [Thu, 8 Mar 2018 07:29:55 +0000 (15:29 +0800)]
register: improvers the regs ops to prevent crash duo to bus type err.
PD#161757: improvers the regs ops to prevent crash duo to bus type err
Change-Id: Id5f7648de84d55700d7c240b32e988363ffb9ef7
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
jianxin.pan [Wed, 7 Mar 2018 06:05:05 +0000 (14:05 +0800)]
dts: g12a: move common parts from dts to dtsi
PD#156734: move g12a common parts from dts to dtsi
Change-Id: I67476217b44774c1645da5482d8c7e43ac91ae7e
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
Jiamin Ma [Fri, 19 Jan 2018 08:54:32 +0000 (16:54 +0800)]
cpufreq: boost cpufreq when remote key input
PD#158772: cpufreq: boost cpufreq when remote key input
Change-Id: I0bc536737380d51f7f14b00d1fa34a52ccd528c0
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
hongmin hua [Thu, 22 Feb 2018 07:51:41 +0000 (15:51 +0800)]
cec: add cec version define in dts & cts 9.3
PD#160943: cec: add cec version define in dts & cts 9.3
Change-Id: Ifd06bf388412d058efd90be3afe6119fc666dacb
Signed-off-by: hongmin hua <hongmin.hua@amlogic.com>
Xing Wang [Wed, 28 Feb 2018 07:14:56 +0000 (15:14 +0800)]
audio: auge: add alsaPORT suffix name for android audio hal
PD#156734: audio: auge: add alsaPORT suffix name for android audio hal
Change-Id: Ie442dc27c594caf0181425e66fe555c1bd5355ba
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Brian Zhu [Tue, 27 Feb 2018 16:16:16 +0000 (00:16 +0800)]
vpp: disable pps as default when scaler ratio is 1:1
PD#156734: vpp: disable pps as default when scaler ratio is 1:1
Change-Id: I5ff2a9a1089461c92996066e0cec4379a5d509e4
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Yicheng Shen [Sat, 24 Feb 2018 03:06:42 +0000 (11:06 +0800)]
hdmirx: code optimize
PD#158047: hdmirx code optimization
1.remove useless parameters;
2.optimize coding style issues;
3.optimize the code frame structure;
4.merge the recent commits from 3.14;
5.add edid information parse;
6.add a new FSM methode;
7.add param to debug file point;
Change-Id: I515ff36f3b0e45dd8b624e7701e2d4b2b1af7e81
Signed-off-by: Yicheng Shen <yicheng.shen@amlogic.com>
pengcheng chen [Wed, 28 Feb 2018 04:27:30 +0000 (12:27 +0800)]
osd: remove wiat vsync in pan_display
PD#154106: osd: remove wiat vsync in pan_display
Change-Id: I02e460d17cc23f316c9c9ff6d475d529fa7ef985
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
kele bai [Mon, 5 Mar 2018 09:14:06 +0000 (17:14 +0800)]
di: fix black screen&crash in switch test av&hdmi
PD#161570: di: fix black screen in hdmi 1080p mode
1) fix r321 black screen in hdmi 1080p mode
2) add debug info for recovery mode
3) move pre hold ratio configuration into pecial function
Change-Id: I6e482505da6f3621a1934f600cedcec4341e0743
Signed-off-by: kele bai <kele.bai@amlogic.com>
Laxman Dewangan [Thu, 6 Apr 2017 13:35:52 +0000 (19:05 +0530)]
gpio: core: Decouple open drain/source flag with active low/high
PD#161621: gpio: core: Decouple open drain/source flag with active low/high
Currently, the GPIO interface is said to Open Drain if it is Single
Ended and active LOW. Similarly, it is said as Open Source if it is
Single Ended and active HIGH.
The active HIGH/LOW is used in the interface for setting the pin
state to HIGH or LOW when enabling/disabling the interface.
In Open Drain interface, pin is set to HIGH by putting pin in
high impedance and LOW by driving to the LOW.
In Open Source interface, pin is set to HIGH by driving pin to
HIGH and set to LOW by putting pin in high impedance.
With above, the Open Drain/Source is unrelated to the active LOW/HIGH
in interface. There is interface where the enable/disable of interface
is ether active LOW or HIGH but it is Open Drain type.
Hence decouple the Open Drain with Single Ended + Active LOW and
Open Source with Single Ended + Active HIGH.
Adding different flag for the Open Drain/Open Source which is valid
only when Single ended flag is enabled.
Note: the patch from v4.14-rc6 with original commit ID
4c0facddb
Change-Id: I2f652614d3783caee3f510dc70e5e185379f49a7
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Yi Zeng [Mon, 29 Jan 2018 06:31:14 +0000 (14:31 +0800)]
mtd: change the block number of RSV member into macro
PD#159810: mtd: change the block number of RSV member into macro
in case of customer want change the RSV part size, we'd better
make the block number of every part be a macro, in case miss modified
in somewhere.
Change-Id: I75e665cc3efd8b4bf4ad5a0843f855d4915ae180
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Evoke Zhang [Fri, 2 Mar 2018 03:07:07 +0000 (11:07 +0800)]
p241: dts: remove vpu default config in dts, only left clk_level
PD#161337: p241: dts: remove vpu default config in dts, only left clk_level
Change-Id: I3f993324f493417227c9325017c0c346d129320f
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Yalong Liu [Wed, 7 Mar 2018 05:58:13 +0000 (13:58 +0800)]
drm: fix g12a drm dtsi
PD#160546: fix g12a drm dtsi
Change-Id: Ie67f1c413abb7ad58561f8b921e0292763a01f02
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
binqi.zhang [Sat, 24 Feb 2018 13:17:03 +0000 (21:17 +0800)]
gpu: set up gpu max freq to 850MHz
PD#156734: gpu: set up gpu max freq to 850MHz
Change-Id: I96d9c9beddd4c5e723fe4c4790c7ce99aeebc1e6
Signed-off-by: binqi.zhang <binqi.zhang@amlogic.com>
Weiming Liu [Tue, 27 Feb 2018 09:14:37 +0000 (17:14 +0800)]
lcd: adjust the mipi_host reg address
PD#156734: lcd: adjust the mipi_host reg address
Change-Id: Ia25bd99d5eb32b129b4170558fdf42f820b7c977
Signed-off-by: Weiming Liu <weiming.liu@amlogic.com>
Xing Wang [Tue, 6 Mar 2018 02:31:05 +0000 (10:31 +0800)]
audio: auge: pdm supports 96k sample rate
PD#156734: audio: auge: pdm supports 96k sample rate
1) pdm supports 96k sample rate
2) set HCIC gain additional shift as default 0
Change-Id: I056f87cd43bb5c07d04b2baff461bb38c7443f6d
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Yi Zeng [Thu, 18 Jan 2018 02:53:29 +0000 (10:53 +0800)]
mtd: add a new slc nand and avoid the 2nd column in some command
PD#158989: mtd: add a new slc nand and avoid the 2nd column in some command
new slc nand: F59L1G81MB (2M)(same id with F59L1G81MA (2Y),
called a joint name of F59L1G81Mxxx).
We do not send the 2nd column in some command such as: read id,
read parameter etc
Change-Id: Ibeac872231c880efde8a38e6344c326043e7d7dc
Signed-off-by: Yi Zeng <yi.zeng@amlogic.com>
Yalong Liu [Tue, 6 Mar 2018 07:06:43 +0000 (15:06 +0800)]
drm: fix g12a buildoot dts
PD#160546: fix g12a buildoot dts
Change-Id: Ia910dbed885a6fd8b294629a3ef3a3a84405069f
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
jianxin.pan [Tue, 6 Mar 2018 05:00:39 +0000 (13:00 +0800)]
defconfig: generate defconfig with savedefconfig
PD#161257: generate meson64_smarthome_defconfig and
meson64_defconfig with savedefconfig
Change-Id: I2afe36040aa75ffe0540a0f74a11d8ec93e8f6ba
Signed-off-by: jianxin.pan <jianxin.pan@amlogic.com>
Hong Guo [Fri, 2 Mar 2018 06:14:39 +0000 (14:14 +0800)]
CPUFREQ: fix cpufreq system halt for reboot.
PD#156734: cpufreq: fix cpufreq system halt for reboot.
Change-Id: I5c12a58b2fa53ef4c22a7032572983bf566b19b7
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
Qiufang Dai [Thu, 1 Mar 2018 13:56:06 +0000 (21:56 +0800)]
clk: fix g12a pll enable ops mutex in in_atomic
PD#161257: fix g12a pll enable ops mutex in in_atomic
Also fix mpll setting range
Change-Id: I0a3acfbfd111d48f3b31c8f068294c1714ad2886
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
kele bai [Fri, 2 Mar 2018 11:48:07 +0000 (19:48 +0800)]
di: fix post write crash for pps enabled in post
PD#156734: di: fix post write crash for pps enabled in post
1) diable post wirte in post write done irq to avoid
pps send data to fifo
Change-Id: I758be72a2fb2c17b731a7575f24a75bc44c5e816
Signed-off-by: kele bai <kele.bai@amlogic.com>
Nanxin Qin [Sat, 24 Feb 2018 11:22:41 +0000 (19:22 +0800)]
media: adds the register ops for media codec io efuse bus [1/2].
PD#161104: adds the register ops for media codec io efuse bus
Change-Id: I6fc625848442754b089428fd8cb10a3047fa4062
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
zhilei.wu [Mon, 5 Mar 2018 05:45:35 +0000 (13:45 +0800)]
dv: enable dv efuse for g12a
PD#157605: dv: enable dv efuse for g12a
Change-Id: I01bcded5f78bbf5c720b4ad95b06b0fc989c2692
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Colin Cross [Fri, 11 Jan 2013 21:51:48 +0000 (13:51 -0800)]
hardlockup: detect hard lockups without NMIs using secondary cpus
PD#160530: porting hard lockup without nmi support
Emulate NMIs on systems where they are not available by using timer
interrupts on other cpus. Each cpu will use its softlockup hrtimer
to check that the next cpu is processing hrtimer interrupts by
verifying that a counter is increasing.
This patch is useful on systems where the hardlockup detector is not
available due to a lack of NMIs, for example most ARM SoCs.
Without this patch any cpu stuck with interrupts disabled can
cause a hardware watchdog reset with no debugging information,
but with this patch the kernel can detect the lockup and panic,
which can result in useful debugging info.
Change-Id: I720032cbec78c79d8b4accacc01f183c70e5d403
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Zongdong Jiao [Fri, 2 Mar 2018 10:24:07 +0000 (18:24 +0800)]
hdmitx: optimise the clock divider
PD#156734: optimise the clock divider of VID_PLL_DIV
This is a bridge of analog signal and digital signal module.
With VCO output 4.455Gbps/2160p60hzY420 12bits mode and the
ENCP needs 594MHz, there should divide half to reduce the
risk of HHI_VID_PLL_CLK_DIV.
Change-Id: If6965d64df1aa4b7cb4a8dd66847db3d5d17aea7
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
pengcheng chen [Thu, 1 Mar 2018 11:16:42 +0000 (19:16 +0800)]
osd: remove useless log print
PD#156734: osd: remove useless log print
Change-Id: Ib7638f396ece0ef2d29f81731bca74fd6794e696
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Evoke Zhang [Mon, 26 Feb 2018 06:49:01 +0000 (14:49 +0800)]
lcd: support two clk_path for g12a
PD#156734: lcd: support two clk_path for g12a
clk_path=0, use hpll, default setting;
clk_path=1, use gp0_pll.
clk_path is configured in dts, and can be changed by sysfs node:
echo path <n> >/sys/class/lcd/clk
Change-Id: I30d29ca8eefb2b3e8f4f7f37e4e0e639b23c06bb
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Long Yu [Wed, 7 Feb 2018 09:47:08 +0000 (17:47 +0800)]
PD#156734: emmc: refixed core phase value for emmc highspeed busmode
Change-Id: I33ce650b3ed9dd6eac41b0814679fb660991a738
Signed-off-by: Long Yu <long.yu@amlogic.com>
Evoke Zhang [Sat, 24 Feb 2018 07:36:53 +0000 (15:36 +0800)]
vout: update viu config when change display mode
PD#156734: vout: update viu config when change display mode
also clearup related reg settings in hdmitx/cvbsout/lcd.
Change-Id: I196363d6caaf7158c8e167fb8ca1353c74913263
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Sat, 24 Feb 2018 02:55:57 +0000 (10:55 +0800)]
vpu: add viu2 vpu_clk_gate control
PD#156734: vpu: add viu2 vpu_clk_gate control
Change-Id: I5a40a71e83a673292810233b000e853bd0420fe8
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
pengcheng chen [Fri, 2 Mar 2018 07:41:39 +0000 (15:41 +0800)]
osd: add viu2 support for g12a
PD#156734: osd: add viu2 support for g12a
Change-Id: If225bdd08a0357960ca307ca7614131211b9aed1
Signed-off-by: pengcheng chen <pengcheng.chen@amlogic.com>
Jian Hu [Thu, 1 Mar 2018 06:33:42 +0000 (14:33 +0800)]
arm64: dts: add i2c alias aliases node
PD#158433: arm64: dts: add i2c alias in aliases node
add alias for i2c controller to fasten i2c dev id
Change-Id: I87c1999766c69e9df63f551f0559b8028844d660
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
MingLiang Dong [Sat, 24 Feb 2018 11:12:38 +0000 (19:12 +0800)]
amvecm: gamma init enable
PD#156734: amvecm: gamma init enable
Change-Id: Ie09dba089cb0c2c574758f184f4e722162b9ce80
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Evoke Zhang [Sat, 24 Feb 2018 09:17:23 +0000 (17:17 +0800)]
clktree: enable dsi_meas clktree
PD#156734: clktree: enable dsi_meas clktree
Change-Id: I2c359119aa3abf8525efd37b53c7c32620b877c5
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Sam Wu [Tue, 27 Feb 2018 07:21:05 +0000 (15:21 +0800)]
factoryBurn: efuse: keyman support efuse user space
PD# 156734 PD# 160873
1, add efuse user space key-name list, then can user key-name rd/wr efuse.
Change-Id: I5feee2e59cefb96fae907403509a86a631e57342
Signed-off-by: Sam Wu <yihui.wu@amlogic.com>
Jiacheng Mei [Thu, 1 Mar 2018 06:35:23 +0000 (14:35 +0800)]
encoder: add encoder for G12A
PD#156734: add encoder for G12A
Change-Id: Ib12f6af79f4264b9de5960cc65b7a3fd13e252f0
Signed-off-by: Jiacheng Mei <jiacheng.mei@amlogic.com>
kele bai [Fri, 23 Feb 2018 10:26:25 +0000 (18:26 +0800)]
di: turn on cont wr interrupt, fine tune cue
PD#156734: di: turn on cont wr interrupt, fine tune cue
1) turn on cont wr int, disable me int
2) modify cue mode for abnormal mode 2/4/7/8/9
3) move clk adjustment into thread env
4) set min clk rate when di disable
5) modify txlx clk tree
Change-Id: I759324806bb9c9bfa4e83ee4a39e5283c5653f3b
Signed-off-by: kele bai <kele.bai@amlogic.com>
MingLiang Dong [Thu, 1 Mar 2018 02:27:09 +0000 (10:27 +0800)]
amvecm: optimize G12A hdr code
PD#156734: amvecm: optimize G12A hdr code
1. put all the mtx/lut parameters together
Change-Id: I902c362fe8d8b01f2793789e9150640e929e1e73
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Brian Zhu [Tue, 13 Feb 2018 19:29:17 +0000 (03:29 +0800)]
ge2d: fix the vapb div and ge2d gate error
PD#156734: ge2d: fix the vapb div and ge2d gate error
Change-Id: Ib0e8c0328d0c136d7a0b50b0bba13cd95b3070f7
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
zhilei.wu [Wed, 28 Feb 2018 08:40:58 +0000 (16:40 +0800)]
ge2d: revised ge2d vapb clk for g12a
PD#156734: ge2d: revised ge2d vapb clk for g12a
Change-Id: Ie3acc059560f24957c2c95609fd3ecdde05b0e56
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Nanxin Qin [Wed, 28 Feb 2018 13:15:01 +0000 (21:15 +0800)]
media: drop g12a register defintion change
PD#156734: media: drop g12a register defintion change
Change-Id: Ieadb57750228755a18357567028fa5ef642dc397
Signed-off-by: Nanxin Qin <nanxin.qin@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
tao zeng [Sat, 24 Feb 2018 07:40:59 +0000 (15:40 +0800)]
mm: optimize for CMA allocate time
PD#159608: mm: optimize for CMA allocate time
1. Make all amlogic-changed mm code configuarable, which are
wrapped by CONFIG_AMLOGIC_CMA/CONFIG_AMLOGIC_MEMORY_EXTEND
2. Implement some core code of CMA to a single file:
drivers/amlogic/memory_ext/aml_cma.c
3. detailed imporove steps:
a) use NOOP as default IO-scheduler for nand based storage.
which can avoid long time wait for page lock found in
CFQ scheduler;
b) use per-cpu thread to allocate CMA concurrent when driver
request large amount CMA memory; these threads have high
user nice value to reduce schedule delay;
c) increase task user nice of mmc queue and kswapd.
d) wake up kswapd if page are hold by kswap shrink list and
cma isolated test failed.
e) Fobidden low user nice task use CMA, which can avoid priority
inversion problem.
f) optimize for LRU usage, devide each type of LRU to 2 parts,
normal pages are linked after LRU head, CMA pages are linked
after cma_list.
g) avoid compaction case move cma forbidden pages to cma area.
h) Increase strength of lowmemory killer.
4. Improve read speed of /proc/pagetrace, a filter can be set to
reduce message which not print functions allocate memory less
than filter value:
echo filter=xxx > /proc/pagetrace
Change-Id: Ie79288b7947aa642e4f7eacc25565559a73660df
Signed-off-by: tao zeng <tao.zeng@amlogic.com>
Nian Jing [Wed, 28 Feb 2018 12:14:45 +0000 (20:14 +0800)]
cvbs: drop busy mdelay, also update register settings
PD#156734: cvbs: drop busy mdelay, also update register settings
Change-Id: I7515dffda49bdd19407ebabf93ebfad5f8ce8125
Signed-off-by: Nian Jing <nian.jing@amlogic.com>
Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
Xing Wang [Wed, 28 Feb 2018 12:03:30 +0000 (20:03 +0800)]
sound: minor fix make array data ready only, short delay
PD#156734: sound: minor fix make array data ready only, short delay
Change-Id: I12d2de5d52c5774bdf56b9358fb9213c8c77fafa
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
Dezhi Kong [Mon, 26 Feb 2018 11:41:26 +0000 (19:41 +0800)]
SR: only disable sr for g12a default
PD#156734: sr: only disable sr for g12a default
Change-Id: I32b7f8be08adaebb2557eab4ed1ad39c084f36d6
Signed-off-by: Dezhi Kong <dezhi.kong@amlogic.com>
Xing Wang [Sat, 24 Feb 2018 04:57:49 +0000 (12:57 +0800)]
audio: auge: pdm supports 64k sample rate
PD#156734: audio: auge: pdm supports 64k sample rate
Change-Id: Ia938906fc0aef51d66b947b376b62c21fb2c8c76
Signed-off-by: Xing Wang <xing.wang@amlogic.com>
zhilei.wu [Fri, 2 Mar 2018 07:43:21 +0000 (15:43 +0800)]
dv: add dolby vision driver for g12a
PD#156734: dv: add dolby vision driver for g12a
Change-Id: I02490c69f6f834f491278403dfcc8923a3fcee77
Signed-off-by: zhilei.wu <zhilei.wu@amlogic.com>
Qiufang Dai [Sat, 10 Feb 2018 16:57:52 +0000 (00:57 +0800)]
dts: G12A: enable reboot and fix mhu playload base addr
PD#156734: enable reboot and fix mhu playload base addr
Change-Id: Ia0849bb9a695f91ea861c6f7ddd1079e4ba70175
Signed-off-by: Qiufang Dai <qiufang.dai@amlogic.com>
qi duan [Sat, 24 Feb 2018 09:33:01 +0000 (17:33 +0800)]
USB: set UTMI interface is 8bit for new phy
PD#156734: USB: set UTMI interface is 8Bit for new phy on dwc2 controller.[1/1]
Change-Id: I2f57664ec75787066f6bac5bcee368b6904966f1
Signed-off-by: qi duan <qi.duan@amlogic.com>
Liang Yang [Tue, 13 Feb 2018 05:23:50 +0000 (13:23 +0800)]
nand: improve nfc clock
PD#156734: nand: improve nfc clock base on pad driver strength
set level1
Change-Id: I1a9fd710e415a064572063292ef569bf67e527a4
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Brian Zhu [Fri, 23 Feb 2018 10:07:56 +0000 (18:07 +0800)]
osd: fix the fifo ctrl setting error
PD#156734: osd: fix the fifo ctrl setting error
Change-Id: I67560a98592b800658d9d8da3a314aac42d66ad2
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Evoke Zhang [Thu, 22 Feb 2018 10:36:38 +0000 (18:36 +0800)]
lcd: add mipi-dsi checking panel state support
PD#156734: lcd: add mipi-dsi checking panel state support
after config check_state parameters in dts,
you can get state by below sysfs node:
cat /sys/class/lcd/mpstate
Change-Id: I6e1d8452e17166cd9c04c2a4979f42308f995b9a
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Yalong Liu [Thu, 8 Feb 2018 12:55:04 +0000 (20:55 +0800)]
DRM: add drm support for g12a
PD#160546: DRM: add drm support for g12a
Verified on g12a
Change-Id: I5bfa4ad388e181af629e013a8d7c516ae5fc3fa4
Signed-off-by: Yalong Liu <yalong.liu@amlogic.com>
Evoke Zhang [Sun, 11 Feb 2018 09:06:12 +0000 (17:06 +0800)]
vpu: update vpu_clk_gate control for g12a
PD#156734: vpu: update vpu_clk_gate control for g12a
Change-Id: Ia0d2bce8ea0e6951a435fc236e4b82bbd32ebcca
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
weiming.liu [Wed, 7 Feb 2018 06:37:33 +0000 (14:37 +0800)]
bl_extern: add lp8556 driver
PD#156734: bl_extern: add lp8556 driver
Change-Id: Id38b698cbc87a227abdcd52037c65df87fc8d654
Signed-off-by: weiming.liu <weiming.liu@amlogic.com>
kele bai [Fri, 9 Feb 2018 03:25:41 +0000 (11:25 +0800)]
di: fix MADI flicker for mem enable
PD#156734: di: fix MADI flicter for mem disable
1) pre ctrl bit11 error cause mem disable
2) update vpu clkb rate
3) fix pulldown parameters probe error
4) fix pulldown count error add default threshold
5) fix pre timeout for intr shared with post
6) mif gate freerun according vlsi avoid mif reg config incorrect
Change-Id: Id8dddff213910bffb6e40b2667738e9ee3d720ca
Signed-off-by: kele bai <kele.bai@amlogic.com>
Xing Wang [Tue, 6 Feb 2018 09:21:00 +0000 (17:21 +0800)]
audio: auge: fix audio locker, resample, tdm format, eq/drc, share buffer
PD#156734: audio: auge: fix audio locker, resample, tdm format, eq/drc, share buffer
Change-Id: I03750c34310bdbc32eddc51f64cf4b91a95325bc
Signed-off-by: Xing Wang <xing.wang@amlogic.com>