Suresh Siddha [Sat, 21 May 2011 00:51:19 +0000 (17:51 -0700)]
x86, apic: Clean up bigsmp apic selection code
Make generic_bigsmp_probe() return struct apic *. This will
avoid exporting apic_bigsmp, which will be consistent with
others.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.252703851@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Sat, 21 May 2011 00:51:18 +0000 (17:51 -0700)]
x86, apic: Use .apicdrivers section for the apic drivers list
This will eliminate the need for apic_probe[], as the probing
now will happen based on the apic drivers order in the
.apcidrivers section.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.164277071@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Sat, 21 May 2011 00:51:17 +0000 (17:51 -0700)]
x86, apic: Introduce .apicdrivers section to find the list of apic drivers
This will pave the way for each apic driver to be self-contained
and eliminate the need for apic_probe[].
Order in which apic drivers are listed in the .apicdrivers
section is important, as this determines the apic probe order.
And this is enforced by the ordering of apic driver files in the
Makefile and the macros apic_driver()/apic_drivers().
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Tested-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: gorcunov@openvz.org
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cyrill Gorcunov [Thu, 19 May 2011 23:45:50 +0000 (16:45 -0700)]
x86, x2apic: Move the common bits to x2apic.h
To eliminate code duplication.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.591426753@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cyrill Gorcunov [Thu, 19 May 2011 23:45:49 +0000 (16:45 -0700)]
x86, x2apic: Minimize IPI register writes using cluster groups
In the case of x2apic cluster mode we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.
This reduces the apic register writes and reduces the amount of
IPI messages (in the best case we can reduce it by a factor of
16).
With this change, the cost of flush_tlb_others(), with the flush
tlb IPI being sent from a cpu in the socket-1 to all the logical
cpus in socket-2 (on a Westmere-EX system that has 20 logical
cpus in a socket) is 3x times better now (compared to the former
'send one-by-one' algorithm).
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.512271057@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cyrill Gorcunov [Thu, 19 May 2011 23:45:48 +0000 (16:45 -0700)]
x86, x2apic: Track the x2apic cluster sibling map
In the case of x2apic cluster mode, we can group IPI register
writes based on the cluster group instead of individual per-cpu
destination messages.
For this purpose, track the cpu's that belong to the same x2apic
cluster.
Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.421800999@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Thu, 19 May 2011 23:45:47 +0000 (16:45 -0700)]
x86, x2apic: Remove duplicate code for IPI mask routines
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.337024125@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Thu, 19 May 2011 23:45:46 +0000 (16:45 -0700)]
x86, apic: Use probe routines to simplify apic selection
Use the unused probe routine in the apic driver to finalize the
apic model selection. This cleans up the
default_setup_apic_routing() and this probe routine in future
can also be used for doing any apic model specific
initialisation.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: steiner@sgi.com
Cc: yinghai@kernel.org
Link: http://lkml.kernel.org/r/20110519234637.247458931@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:39 +0000 (16:31 -0700)]
x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic'
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233158.089978277@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:38 +0000 (16:31 -0700)]
x86, ioapic: Consolidate gsi routing info into 'struct ioapic'
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.994002011@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:37 +0000 (16:31 -0700)]
x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic'
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.909013179@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:36 +0000 (16:31 -0700)]
x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic'
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.830697056@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:35 +0000 (16:31 -0700)]
x86, ioapic: Add struct ioapic
Introduce struct ioapic with nr_registers field.
This will pave way for consolidating different MAX_IO_APICS
arrays into it.
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: daniel.blueman@gmail.com
Link: http://lkml.kernel.org/r/20110518233157.744315519@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:34 +0000 (16:31 -0700)]
x86, ioapic: Remove duplicate code for saving/restoring RTEs
Code flow for enabling interrupt-remapping has its own routines
for saving and restoring io-apic RTE's. ioapic suspend/resume
code flow also has similar routines. Remove the duplicate code.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.673130611@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:33 +0000 (16:31 -0700)]
x86, ioapic: Use ioapic_saved_data while enabling intr-remapping
Code flow for enabling interrupt-remapping was
allocating/freeing buffers for saving/restoring io-apic RTE's.
ioapic suspend/resume code uses boot time allocated
ioapic_saved_data that is a perfect match for reuse here.
This will remove the unnecessary allocation/free of the
temporary buffers during suspend/resume of interrupt-remapping
enabled platforms aswell as paving the way for further code
consolidation.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.574469296@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Suresh Siddha [Wed, 18 May 2011 23:31:32 +0000 (16:31 -0700)]
x86, ioapic: Allocate ioapic_saved_data early
This allows re-using this buffer for enabling
interrupt-remapping during boot and resume. And thus allow for
consolidating the code between ioapic suspend/resume and
interrupt-remapping.
Tested-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Link: http://lkml.kernel.org/r/20110518233157.481404505@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Daniel J Blueman [Wed, 18 May 2011 23:31:31 +0000 (16:31 -0700)]
x86, ioapic: Fix potential resume deadlock
Fix a potential deadlock when resuming; here the calling
function has disabled interrupts, so we cannot sleep.
Change the memory allocation flag from GFP_KERNEL to GFP_ATOMIC.
TODO: We can do away with this memory allocation during resume
by reusing the ioapic suspend/resume code that uses boot time
allocated buffers, but we want to keep this -stable patch
simple.
Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: <stable@kernel.org> # v2.6.38/39
Link: http://lkml.kernel.org/r/20110518233157.385970138@sbsiddha-MOBL3.sc.intel.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Fri, 20 May 2011 04:22:53 +0000 (21:22 -0700)]
selinux: avoid unnecessary avc cache stat hit count
There is no point in counting hits - we can calculate it from the number
of lookups and misses.
This makes the avc statistics a bit smaller, and makes the code
generation better too.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 May 2011 01:59:47 +0000 (18:59 -0700)]
selinux: de-crapify avc cache stat code generation
You can turn off the avc cache stats, but distributions seem to not do
that (perhaps because several performance tuning how-to's talk about the
avc cache statistics).
Which is sad, because the code it generates is truly horrendous, with
the statistics update being sandwitched between get_cpu/put_cpu which in
turn causes preemption disables etc. We're talking ten+ instructions
just to increment a per-cpu variable in some pretty hot code.
Fix the craziness by just using 'this_cpu_inc()' instead. Suddenly we
only need a single 'inc' instruction to increment the statistics. This
is quite noticeable in the incredibly hot avc_has_perm_noaudit()
function (which triggers all the statistics by virtue of doing an
avc_lookup() call).
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 May 2011 01:24:11 +0000 (18:24 -0700)]
Merge branch 'driver-core-next' of git://git./linux/kernel/git/gregkh/driver-core-2.6
* 'driver-core-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (44 commits)
debugfs: Silence DEBUG_STRICT_USER_COPY_CHECKS=y warning
sysfs: remove "last sysfs file:" line from the oops messages
drivers/base/memory.c: fix warning due to "memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION"
memory hotplug: Speed up add/remove when blocks are larger than PAGES_PER_SECTION
SYSFS: Fix erroneous comments for sysfs_update_group().
driver core: remove the driver-model structures from the documentation
driver core: Add the device driver-model structures to kerneldoc
Translated Documentation/email-clients.txt
RAW driver: Remove call to kobject_put().
reboot: disable usermodehelper to prevent fs access
efivars: prevent oops on unload when efi is not enabled
Allow setting of number of raw devices as a module parameter
Introduce CONFIG_GOOGLE_FIRMWARE
driver: Google Memory Console
driver: Google EFI SMI
x86: Better comments for get_bios_ebda()
x86: get_bios_ebda_length()
misc: fix ti-st build issues
params.c: Use new strtobool function to process boolean inputs
debugfs: move to new strtobool
...
Fix up trivial conflicts in fs/debugfs/file.c due to the same patch
being applied twice, and an unrelated cleanup nearby.
Stephen Rothwell [Fri, 20 May 2011 01:11:53 +0000 (11:11 +1000)]
signal.h need a definition of struct task_struct
This fixes these build errors on powerpc:
In file included from arch/powerpc/mm/fault.c:18:
include/linux/signal.h:239: error: 'struct task_struct' declared inside parameter list
include/linux/signal.h:239: error: its scope is only this definition or declaration, which is probably not what you want
include/linux/signal.h:240: error: 'struct task_struct' declared inside parameter list
..
Exposed by commit
e66eed651fd1 ("list: remove prefetching from regular
list iterators"), which removed the include of <linux/prefetch.h> from
<linux/list.h>.
Without that, linux/signal.h no longer accidentally got the declaration
of 'struct task_struct'.
Fix by properly declaring the struct, rather than introducing any new
header file dependency.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 20 May 2011 01:14:34 +0000 (18:14 -0700)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (78 commits)
Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
net,rcu: convert call_rcu(prl_entry_destroy_rcu) to kfree
batman,rcu: convert call_rcu(softif_neigh_free_rcu) to kfree_rcu
batman,rcu: convert call_rcu(neigh_node_free_rcu) to kfree()
batman,rcu: convert call_rcu(gw_node_free_rcu) to kfree_rcu
net,rcu: convert call_rcu(kfree_tid_tx) to kfree_rcu()
net,rcu: convert call_rcu(xt_osf_finger_free_rcu) to kfree_rcu()
net/mac80211,rcu: convert call_rcu(work_free_rcu) to kfree_rcu()
net,rcu: convert call_rcu(wq_free_rcu) to kfree_rcu()
net,rcu: convert call_rcu(phonet_device_rcu_free) to kfree_rcu()
perf,rcu: convert call_rcu(swevent_hlist_release_rcu) to kfree_rcu()
perf,rcu: convert call_rcu(free_ctx) to kfree_rcu()
net,rcu: convert call_rcu(__nf_ct_ext_free_rcu) to kfree_rcu()
net,rcu: convert call_rcu(net_generic_release) to kfree_rcu()
net,rcu: convert call_rcu(netlbl_unlhsh_free_addr6) to kfree_rcu()
net,rcu: convert call_rcu(netlbl_unlhsh_free_addr4) to kfree_rcu()
security,rcu: convert call_rcu(sel_netif_free) to kfree_rcu()
net,rcu: convert call_rcu(xps_dev_maps_release) to kfree_rcu()
net,rcu: convert call_rcu(xps_map_release) to kfree_rcu()
net,rcu: convert call_rcu(rps_map_release) to kfree_rcu()
...
Linus Torvalds [Fri, 20 May 2011 01:10:17 +0000 (18:10 -0700)]
Merge branch 'x86-smep-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-smep-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cpu: Enable/disable Supervisor Mode Execution Protection
x86, cpu: Add SMEP CPU feature in CR4
x86, cpufeature: Add cpufeature flag for SMEP
Linus Torvalds [Fri, 20 May 2011 01:09:45 +0000 (18:09 -0700)]
Merge branches 'x86-reboot-for-linus' and 'x86-setup-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-reboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Reorder reboot method preferences
* 'x86-setup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, setup: Fix EDD3.0 data verification.
Linus Torvalds [Fri, 20 May 2011 01:08:06 +0000 (18:08 -0700)]
Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Introduce pci_map_biosrom()
x86, olpc: Use device tree for platform identification
Linus Torvalds [Fri, 20 May 2011 01:07:31 +0000 (18:07 -0700)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (50 commits)
x86, mm: Allow ZONE_DMA to be configurable
x86, NUMA: Trim numa meminfo with max_pfn in a separate loop
x86, NUMA: Rename setup_node_bootmem() to setup_node_data()
x86, NUMA: Enable emulation on 32bit too
x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too
x86, NUMA: Rename amdtopology_64.c to amdtopology.c
x86, NUMA: Make numa_init_array() static
x86, NUMA: Make 32bit use common NUMA init path
x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()
x86-32, NUMA: Add @start and @end to init_alloc_remap()
x86, NUMA: Remove long 64bit assumption from numa.c
x86, NUMA: Enable build of generic NUMA init code on 32bit
x86, NUMA: Move NUMA init logic from numa_64.c to numa.c
x86-32, NUMA: Update numaq to use new NUMA init protocol
x86-32, NUMA: Replace srat_32.c with srat.c
x86-32, NUMA: implement temporary NUMA init shims
x86, NUMA: Move numa_nodes_parsed to numa.[hc]
x86-32, NUMA: Move get_memcfg_numa() into numa_32.c
x86, NUMA: make srat.c 32bit safe
x86, NUMA: rename srat_64.c to srat.c
...
Linus Torvalds [Fri, 20 May 2011 01:03:56 +0000 (18:03 -0700)]
Merge branches 'x86-efi-for-linus', 'x86-gart-for-linus', 'x86-irq-for-linus' and 'x86-mce-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, efi: Ensure that the entirity of a region is mapped
x86, efi: Pass a minimal map to SetVirtualAddressMap()
x86, efi: Merge contiguous memory regions of the same type and attribute
x86, efi: Consolidate EFI nx control
x86, efi: Remove virtual-mode SetVirtualAddressMap call
* 'x86-gart-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, gart: Don't enforce GART aperture lower-bound by alignment
* 'x86-irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Don't unmask disabled irqs when migrating them
x86: Skip migrating IRQF_PER_CPU irqs in fixup_irqs()
* 'x86-mce-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, mce: Drop the default decoding notifier
x86, MCE: Do not taint when handling correctable errors
Linus Torvalds [Fri, 20 May 2011 00:55:12 +0000 (17:55 -0700)]
Merge branch 'x86-cpu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-cpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, cpu: Fix detection of Celeron Covington stepping A1 and B0
Documentation, ABI: Update L3 cache index disable text
x86, AMD, cacheinfo: Fix L3 cache index disable checks
x86, AMD, cacheinfo: Fix fallout caused by max3 conversion
x86, cpu: Change NOP selection for certain Intel CPUs
x86, cpu: Clean up and unify the NOP selection infrastructure
x86, percpu: Use ASM_NOP4 instead of hardcoding P6_NOP4
x86, cpu: Move AMD Elan Kconfig under "Processor family"
Fix up trivial conflicts in alternative handling (commit
dc326fca2b64
"x86, cpu: Clean up and unify the NOP selection infrastructure" removed
some hacky 5-byte instruction stuff, while commit
d430d3d7e646 "jump
label: Introduce static_branch() interface" renamed HAVE_JUMP_LABEL to
CONFIG_JUMP_LABEL in the code that went away)
Linus Torvalds [Fri, 20 May 2011 00:49:35 +0000 (17:49 -0700)]
Merge branches 'x86-apic-for-linus', 'x86-asm-for-linus' and 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, apic: Print verbose error interrupt reason on apic=debug
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Demacro CONFIG_PARAVIRT cpu accessors
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix mrst sparse complaints
x86: Fix spelling error in the memcpy() source code comment
x86, mpparse: Remove unnecessary variable
Linus Torvalds [Fri, 20 May 2011 00:45:08 +0000 (17:45 -0700)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
hrtimer: Make lookup table const
RTC: Disable CONFIG_RTC_CLASS from being built as a module
timers: Fix alarmtimer build issues when CONFIG_RTC_CLASS=n
timers: Remove delayed irqwork from alarmtimers implementation
timers: Improve alarmtimer comments and minor fixes
timers: Posix interface for alarm-timers
timers: Introduce in-kernel alarm-timer interface
timers: Add rb_init_node() to allow for stack allocated rb nodes
time: Add timekeeping_inject_sleeptime
Linus Torvalds [Fri, 20 May 2011 00:44:40 +0000 (17:44 -0700)]
Merge branch 'timers-clockevents-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-clockevents-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: hpet: Cleanup the clockevents init and register code
x86: Convert PIT to clockevents_config_and_register()
clockevents: Provide interface to reconfigure an active clock event device
clockevents: Provide combined configure and register function
clockevents: Restructure clock_event_device members
clocksource: Get rid of the hardcoded 5 seconds sleep time limit
clocksource: Restructure clocksource struct members
Linus Torvalds [Fri, 20 May 2011 00:44:13 +0000 (17:44 -0700)]
Merge branch 'timers-clocksource-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
clocksource: convert mips to generic i8253 clocksource
clocksource: convert x86 to generic i8253 clocksource
clocksource: convert footbridge to generic i8253 clocksource
clocksource: add common i8253 PIT clocksource
blackfin: convert to clocksource_register_hz
mips: convert to clocksource_register_hz/khz
sparc: convert to clocksource_register_hz/khz
alpha: convert to clocksource_register_hz
microblaze: convert to clocksource_register_hz/khz
ia64: convert to clocksource_register_hz/khz
x86: Convert remaining x86 clocksources to clocksource_register_hz/khz
Make clocksource name const
Linus Torvalds [Fri, 20 May 2011 00:41:22 +0000 (17:41 -0700)]
Merge branches 'sched-core-for-linus' and 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
sched: Fix and optimise calculation of the weight-inverse
sched: Avoid going ahead if ->cpus_allowed is not changed
sched, rt: Update rq clock when unthrottling of an otherwise idle CPU
sched: Remove unused parameters from sched_fork() and wake_up_new_task()
sched: Shorten the construction of the span cpu mask of sched domain
sched: Wrap the 'cfs_rq->nr_spread_over' field with CONFIG_SCHED_DEBUG
sched: Remove unused 'this_best_prio arg' from balance_tasks()
sched: Remove noop in alloc_rt_sched_group()
sched: Get rid of lock_depth
sched: Remove obsolete comment from scheduler_tick()
sched: Fix sched_domain iterations vs. RCU
sched: Next buddy hint on sleep and preempt path
sched: Make set_*_buddy() work on non-task entities
sched: Remove need_migrate_task()
sched: Move the second half of ttwu() to the remote cpu
sched: Restructure ttwu() some more
sched: Rename ttwu_post_activation() to ttwu_do_wakeup()
sched: Remove rq argument from ttwu_stat()
sched: Remove rq->lock from the first half of ttwu()
sched: Drop rq->lock from sched_exec()
...
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
sched: Fix rt_rq runtime leakage bug
Linus Torvalds [Fri, 20 May 2011 00:36:08 +0000 (17:36 -0700)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (107 commits)
perf stat: Add more cache-miss percentage printouts
perf stat: Add -d -d and -d -d -d options to show more CPU events
ftrace/kbuild: Add recordmcount files to force full build
ftrace: Add self-tests for multiple function trace users
ftrace: Modify ftrace_set_filter/notrace to take ops
ftrace: Allow dynamically allocated function tracers
ftrace: Implement separate user function filtering
ftrace: Free hash with call_rcu_sched()
ftrace: Have global_ops store the functions that are to be traced
ftrace: Add ops parameter to ftrace_startup/shutdown functions
ftrace: Add enabled_functions file
ftrace: Use counters to enable functions to trace
ftrace: Separate hash allocation and assignment
ftrace: Create a global_ops to hold the filter and notrace hashes
ftrace: Use hash instead for FTRACE_FL_FILTER
ftrace: Replace FTRACE_FL_NOTRACE flag with a hash of ignored functions
perf bench, x86: Add alternatives-asm.h wrapper
x86, 64-bit: Fix copy_[to/from]_user() checks for the userspace address limit
x86, mem: memset_64.S: Optimize memset by enhanced REP MOVSB/STOSB
x86, mem: memmove_64.S: Optimize memmove by enhanced REP MOVSB/STOSB
...
Linus Torvalds [Fri, 20 May 2011 00:30:15 +0000 (17:30 -0700)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
irq: Export functions to allow modular irq drivers
genirq: Uninline and sanity check generic_handle_irq()
genirq: Remove pointless ifdefs
genirq: Make generic irq chip depend on CONFIG_GENERIC_IRQ_CHIP
genirq: Add chip suspend and resume callbacks
genirq: Implement a generic interrupt chip
genirq: Support per-IRQ thread disabling.
genirq: irq_desc: Document preflow_handler and affinity_hint
genirq: Update DocBook comments
genirq: Forgotten updates/deletions after removal of compat code
Linus Torvalds [Fri, 20 May 2011 00:29:29 +0000 (17:29 -0700)]
Merge branch 'core-locking-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
seqlock: Don't smp_rmb in seqlock reader spin loop
watchdog, hung_task_timeout: Add Kconfig configurable default
lockdep: Remove cmpxchg to update nr_chain_hlocks
lockdep: Print a nicer description for simple irq lock inversions
lockdep: Replace "Bad BFS generated tree" message with something less cryptic
lockdep: Print a nicer description for irq inversion bugs
lockdep: Print a nicer description for simple deadlocks
lockdep: Print a nicer description for normal deadlocks
lockdep: Print a nicer description for irq lock inversions
Linus Torvalds [Fri, 20 May 2011 00:28:58 +0000 (17:28 -0700)]
Merge branch 'core-iommu-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, gart: Rename pci-gart_64.c to amd_gart_64.c
x86/amd-iommu: Use threaded interupt handler
arch/x86/kernel/pci-iommu_table.c: Convert sprintf_symbol to %pS
x86/amd-iommu: Add support for invalidate_all command
x86/amd-iommu: Add extended feature detection
x86/amd-iommu: Add ATS enable/disable code
x86/amd-iommu: Add flag to indicate IOTLB support
x86/amd-iommu: Flush device IOTLB if ATS is enabled
x86/amd-iommu: Select PCI_IOV with AMD IOMMU driver
PCI: Move ATS declarations in seperate header file
dma-debug: print information about leaked entry
x86/amd-iommu: Flush all internal TLBs when IOMMUs are enabled
x86/amd-iommu: Rename iommu_flush_device
x86/amd-iommu: Improve handling of full command buffer
x86/amd-iommu: Rename iommu_flush* to domain_flush*
x86/amd-iommu: Remove command buffer resetting logic
x86/amd-iommu: Cleanup completion-wait handling
x86/amd-iommu: Cleanup inv_pages command handling
x86/amd-iommu: Move inv-dte command building to own function
x86/amd-iommu: Move compl-wait command building to own function
Linus Torvalds [Thu, 19 May 2011 23:46:07 +0000 (16:46 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: (34 commits)
PM: Introduce generic prepare and complete callbacks for subsystems
PM: Allow drivers to allocate memory from .prepare() callbacks safely
PM: Remove CONFIG_PM_VERBOSE
Revert "PM / Hibernate: Reduce autotuned default image size"
PM / Hibernate: Add sysfs knob to control size of memory for drivers
PM / Wakeup: Remove useless synchronize_rcu() call
kmod: always provide usermodehelper_disable()
PM / ACPI: Remove acpi_sleep=s4_nonvs
PM / Wakeup: Fix build warning related to the "wakeup" sysfs file
PM: Print a warning if firmware is requested when tasks are frozen
PM / Runtime: Rework runtime PM handling during driver removal
Freezer: Use SMP barriers
PM / Suspend: Do not ignore error codes returned by suspend_enter()
PM: Fix build issue in clock_ops.c for CONFIG_PM_RUNTIME unset
PM: Revert "driver core: platform_bus: allow runtime override of dev_pm_ops"
OMAP1 / PM: Use generic clock manipulation routines for runtime PM
PM: Remove sysdev suspend, resume and shutdown operations
PM / PowerPC: Use struct syscore_ops instead of sysdevs for PM
PM / UNICORE32: Use struct syscore_ops instead of sysdevs for PM
PM / AVR32: Use struct syscore_ops instead of sysdevs for PM
...
Linus Torvalds [Thu, 19 May 2011 23:44:34 +0000 (16:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
IB/qib: Use pci_dev->revision
RDMA/iwcm: Get rid of enum iw_cm_event_status
IB/ipath: Use pci_dev->revision, again
IB/qib: Prevent driver hang with unprogrammed boards
RDMA/cxgb4: EEH errors can hang the driver
RDMA/cxgb4: Reset wait condition atomically
RDMA/cxgb4: Fix missing parentheses
RDMA/cxgb4: Initialization errors can cause crash
RDMA/cxgb4: Don't change QP state outside EP lock
RDMA/cma: Add an ID_REUSEADDR option
RDMA/cma: Fix handling of IPv6 addressing in cma_use_port
Linus Torvalds [Thu, 19 May 2011 23:44:13 +0000 (16:44 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/cmarinas/linux-2.6-cm
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-2.6-cm:
kmemleak: Initialise kmemleak after debug_objects_mem_init()
kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAK
kmemleak: Do not return a pointer to an object that kmemleak did not get
Linus Torvalds [Thu, 19 May 2011 23:40:47 +0000 (16:40 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/upstream-linus
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (48 commits)
MIPS: Move arch_get_unmapped_area and gang to new file.
MIPS: Cleanup arch_get_unmapped_area
MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
Octeon: Fix interrupt irq settings for performance counters.
MIPS: Fix build warnings on defconfigs
MIPS: Lemote 2F, Malta: Fix build warning
MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
MIPS: Set ELF AT_PLATFORM string for BMIPS processors
MIPS: Introduce set_elf_platform() helper function
MIPS: JZ4740: setup: Autodetect physical memory.
MIPS: BCM47xx: Fix MAC address parsing.
MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
MIPS: BCM47xx: Register SSB fallback sprom callback
MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
SSB: Change fallback sprom to callback mechanism.
MIPS: Alchemy: Clean up GPIO registers and accessors
MIPS: Alchemy: Cleanup DMA addresses
MIPS: Alchemy: Rewrite ethernet platform setup
MIPS: Alchemy: Rewrite UART setup and constants.
MIPS: Alchemy: Convert dbdma.c to syscore_ops
...
Linus Torvalds [Thu, 19 May 2011 23:27:21 +0000 (16:27 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/geert/linux-m68k
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
input/atari: Fix mouse movement and button mapping
input/atari: Fix atarimouse init
input/atari: Use the correct mouse interrupt hook
m68k/atari: Do not use "/" in interrupt names
m68k: unistd - Comment out definitions for unimplemented syscalls
m68k: Really wire up sys_pselect6 and sys_ppoll
m68k: Merge mmu and non-mmu versions of sys_call_table
MAINTAINERS: Roman Zippel has been MIA for several years.
m68k: bitops - Never step beyond the end of the bitmap
m68k: bitops - offset == ((long)p - (long)vaddr) * 8
Linus Torvalds [Thu, 19 May 2011 23:14:58 +0000 (16:14 -0700)]
Merge branches 'stable/irq', 'stable/p2m.bugfixes', 'stable/e820.bugfixes' and 'stable/mmu.bugfixes' of git://git./linux/kernel/git/konrad/xen
* 'stable/irq' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen: do not clear and mask evtchns in __xen_evtchn_do_upcall
* 'stable/p2m.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/p2m: Create entries in the P2M_MFN trees's to track 1-1 mappings
* 'stable/e820.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/setup: Fix for incorrect xen_extra_mem_start initialization under 32-bit
xen/setup: Ignore E820_UNUSABLE when setting 1-1 mappings.
* 'stable/mmu.bugfixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen mmu: fix a race window causing leave_mm BUG()
Linus Torvalds [Thu, 19 May 2011 23:14:35 +0000 (16:14 -0700)]
Merge branches 'stable/balloon.cleanup' and 'stable/general.cleanup' of git://git./linux/kernel/git/konrad/xen
* 'stable/balloon.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/balloon: Move dec_totalhigh_pages() from __balloon_append() to balloon_append()
xen/balloon: Clarify credit calculation
xen/balloon: Simplify HVM integration
xen/balloon: Use PageHighMem() for high memory page detection
* 'stable/general.cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
drivers/xen/sys-hypervisor: Cleanup code/data sections definitions
arch/x86/xen/smp: Cleanup code/data sections definitions
arch/x86/xen/time: Cleanup code/data sections definitions
arch/x86/xen/xen-ops: Cleanup code/data sections definitions
arch/x86/xen/mmu: Cleanup code/data sections definitions
arch/x86/xen/setup: Cleanup code/data sections definitions
arch/x86/xen/enlighten: Cleanup code/data sections definitions
arch/x86/xen/irq: Cleanup code/data sections definitions
xen: tidy up whitespace in drivers/xen/Makefile
Linus Torvalds [Thu, 19 May 2011 23:14:25 +0000 (16:14 -0700)]
Merge branches 'stable/backend.base.v3' and 'stable/gntalloc.v7' of git://git./linux/kernel/git/konrad/xen
* 'stable/backend.base.v3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/pci: Fix compiler error when CONFIG_XEN_PRIVILEGED_GUEST is not set.
xen/p2m: Add EXPORT_SYMBOL_GPL to the M2P override functions.
xen/p2m/m2p/gnttab: Support GNTMAP_host_map in the M2P override.
xen/irq: The Xen hypervisor cleans up the PIRQs if the other domain forgot.
xen/irq: Export 'xen_pirq_from_irq' function.
xen/irq: Add support to check if IRQ line is shared with other domains.
xen/irq: Check if the PCI device is owned by a domain different than DOMID_SELF.
xen/pci: Add xen_[find|register|unregister]_device_domain_owner functions.
* 'stable/gntalloc.v7' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/gntdev,gntalloc: Remove unneeded VM flags
Linus Torvalds [Thu, 19 May 2011 23:14:02 +0000 (16:14 -0700)]
Merge branch 'stable/broadcom.ibft' of git://git./linux/kernel/git/konrad/ibft-2.6
* 'stable/broadcom.ibft' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft-2.6:
iscsi_ibft: search for broadcom specific ibft sign (v2)
Linus Torvalds [Thu, 19 May 2011 22:59:24 +0000 (15:59 -0700)]
Merge branch 'move-drivers' of git://git./linux/kernel/git/davej/cpufreq
* 'move-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] Move x86 drivers to drivers/cpufreq/
Linus Torvalds [Thu, 19 May 2011 22:57:29 +0000 (15:57 -0700)]
Merge branch 'next' of git://git./linux/kernel/git/davej/cpufreq
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
[CPUFREQ] remove redundant sprintf from request_module call.
[CPUFREQ] cpufreq_stats.c: Fixed brace coding style issue
[CPUFREQ] Fix memory leak in cpufreq_stat
[CPUFREQ] cpufreq.h: Fix some checkpatch.pl coding style issues.
[CPUFREQ] use dynamic debug instead of custom infrastructure
[CPUFREQ] CPU hotplug, re-create sysfs directory and symlinks
[CPUFREQ] Fix _OSC UUID in pcc-cpufreq
Dave Jones [Thu, 19 May 2011 22:51:07 +0000 (18:51 -0400)]
[CPUFREQ] Move x86 drivers to drivers/cpufreq/
Signed-off-by: Dave Jones <davej@redhat.com>
Linus Torvalds [Thu, 19 May 2011 21:56:13 +0000 (14:56 -0700)]
Merge git://git./linux/kernel/git/rusty/linux-2.6-for-linus
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
params.c: Use new strtobool function to process boolean inputs
debugfs: move to new strtobool
Add a strtobool function matching semantics of existing in kernel equivalents
modpost: Update 64k section support for binutils 2.18.50
module: Use binary search in lookup_symbol()
module: Use the binary search for symbols resolution
lib: Add generic binary search function to the kernel.
module: Sort exported symbols
module: each_symbol_section instead of each_symbol
module: split unset_section_ro_nx function.
module: undo module RONX protection correctly.
module: zero mod->init_ro_size after init is freed.
minor ANSI prototype sparse fix
module: reorder kparam_array to remove alignment padding on 64 bit builds
module: remove 64 bit alignment padding from struct module with CONFIG_TRACE*
module: do not hide __modver_version_show declaration behind ifdef
module: deal with alignment issues in built-in module versions
Linus Torvalds [Thu, 19 May 2011 21:55:34 +0000 (14:55 -0700)]
Merge branch 'docs-move' of git://git./linux/kernel/git/rdunlap/linux-docs
* 'docs-move' of git://git.kernel.org/pub/scm/linux/kernel/git/rdunlap/linux-docs:
Correct occurrences of - Documentation/kvm/ to Documentation/virtual/kvm - Documentation/uml/ to Documentation/virtual/uml - Documentation/lguest/ to Documentation/virtual/lguest throughout the kernel source tree.
Add a 00-INDEX file to Documentation/virtual Remove uml from the top level 00-INDEX file.
Move kvm, uml, and lguest subdirectories under a common "virtual" directory, I.E:
Paul E. McKenney [Thu, 12 May 2011 08:08:07 +0000 (01:08 -0700)]
Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"
This reverts commit
e59fb3120becfb36b22ddb8bd27d065d3cdca499.
This reversion was due to (extreme) boot-time slowdowns on SPARC seen by
Yinghai Lu and on x86 by Ingo
.
This is a non-trivial reversion due to intervening commits.
Conflicts:
Documentation/RCU/trace.txt
kernel/rcutree.c
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Linus Torvalds [Thu, 19 May 2011 21:15:29 +0000 (14:15 -0700)]
list: remove prefetching from regular list iterators
This is removes the use of software prefetching from the regular list
iterators. We don't want it. If you do want to prefetch in some
iterator of yours, go right ahead. Just don't expect the iterator to do
it, since normally the downsides are bigger than the upsides.
It also replaces <linux/prefetch.h> with <linux/const.h>, because the
use of LIST_POISON ends up needing it. <linux/poison.h> is sadly not
self-contained, and including prefetch.h just happened to hide that.
Suggested by David Miller (networking has a lot of regular lists that
are often empty or a single entry, and prefetching is not going to do
anything but add useless instructions).
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 19 May 2011 20:50:07 +0000 (13:50 -0700)]
hlist: remove software prefetching in hlist iterators
They not only increase the code footprint, they actually make things
slower rather than faster. On internationally acclaimed benchmarks
("make -j16" on an already fully built kernel source tree) the hlist
prefetching slows down the build by up to 1%.
(Almost all of it comes from hlist_for_each_entry_rcu() as used by
avc_has_perm_noaudit(), which is very hot due to all the pathname
lookups to see if there is anything to do).
The cause seems to be two-fold:
- on at least some Intel cores, prefetch(NULL) ends up with some
microarchitectural stall due to the TLB miss that it incurs. The
hlist case triggers this very commonly, since the NULL pointer is the
last entry in the list.
- the prefetch appears to cause more D$ activity, probably because it
prefetches hash list entries that are never actually used (because we
ended the search early due to a hit).
Regardless, the numbers clearly say that the implicit prefetching is
simply a bad idea. If some _particular_ user of the hlist iterators
wants to prefetch the next list entry, they can do so themselves
explicitly, rather than depend on all list iterators doing so
implicitly.
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: linux-arch@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ingo Molnar [Thu, 19 May 2011 17:48:03 +0000 (19:48 +0200)]
Merge branch 'tip/perf/core' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into perf/core
Ingo Molnar [Thu, 19 May 2011 17:25:55 +0000 (19:25 +0200)]
Merge branch 'tip/perf/core-3' of git://git./linux/kernel/git/rostedt/linux-2.6-trace into perf/core
Catalin Marinas [Thu, 19 May 2011 15:25:30 +0000 (16:25 +0100)]
kmemleak: Initialise kmemleak after debug_objects_mem_init()
Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD
is enabled, the RCU callback triggers a call to free_object() in
lib/debugobjects.c. Since kmemleak is initialised before debug objects
initialisation, it may result in a kernel panic during booting. This
patch moves the kmemleak_init() call after debug_objects_mem_init().
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: <stable@kernel.org>
Catalin Marinas [Wed, 27 Apr 2011 16:06:19 +0000 (17:06 +0100)]
kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAK
In the past DEBUG_FS used to depend on SYSFS and DEBUG_KMEMLEAK selected
it conditionally. This is no longer the case, so always select DEBUG_FS
via DEBUG_KMEMLEAK.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Catalin Marinas [Wed, 27 Apr 2011 15:44:26 +0000 (16:44 +0100)]
kmemleak: Do not return a pointer to an object that kmemleak did not get
The kmemleak_seq_next() function tries to get an object (and increment
its use count) before returning it. If it could not get the last object
during list traversal (because it may have been freed), the function
should return NULL rather than a pointer to such object that it did not
get.
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Cc: <stable@kernel.org>
Geert Uytterhoeven [Mon, 31 Jan 2011 19:15:04 +0000 (20:15 +0100)]
input/atari: Fix mouse movement and button mapping
Up and down movements were reversed, left and right buttons were swapped.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Michael Schmitz [Sun, 28 Dec 2008 22:00:45 +0000 (23:00 +0100)]
input/atari: Fix atarimouse init
Atarimouse fails to load as a module (with ENODEV), due to a brown paper
bag bug, misinterpreting the semantics of atari_keyb_init().
[geert] Propagate the return value of atari_keyb_init() everywhere
Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Michael Schmitz [Tue, 16 Dec 2008 20:26:03 +0000 (21:26 +0100)]
input/atari: Use the correct mouse interrupt hook
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not
atari_input_mouse_interrupt_hook. Fix below.
[geert] Killed off atari_mouse_interrupt_hook completely, after fixing another
incorrect assignment in atarimouse.c.
Signed-off-by: Michael Schmitz <schmitz@debian.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Wed, 4 May 2011 12:55:41 +0000 (14:55 +0200)]
m68k/atari: Do not use "/" in interrupt names
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when
trying to add an entry for the interrupt handler to sysfs.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Thu, 5 May 2011 18:33:02 +0000 (20:33 +0200)]
m68k: unistd - Comment out definitions for unimplemented syscalls
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Fri, 6 May 2011 18:57:11 +0000 (20:57 +0200)]
m68k: Really wire up sys_pselect6 and sys_ppoll
We reserved the numbers a long time ago, but never wired them up in the
syscall table as they need TIF_RESTORE_SIGMASK, which we only got last year
in commit
cb6831d5d3099e772a510eb3e1ed0760ccffb45e ("m68k: Switch to saner
sigsuspend()")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Cc: stable@kernel.org
Geert Uytterhoeven [Wed, 6 Apr 2011 20:12:53 +0000 (22:12 +0200)]
m68k: Merge mmu and non-mmu versions of sys_call_table
Impact for nommu:
- Store table in .rodata instead of .text,
- Let kernel/sys_ni.c handle the stubbing of MMU-only syscalls,
- Implement sys_mremap and sys_nfsservct,
- Remove unused padding at the end of the table.
Impact for mmu:
- Store table in .rodata instead of .data.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Greg Ungerer <gerg@uclinux.org>
Geert Uytterhoeven [Sun, 24 Apr 2011 08:32:49 +0000 (10:32 +0200)]
MAINTAINERS: Roman Zippel has been MIA for several years.
Hence make AFFS and HFS orphans, and remove him as an m68k maintainer.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Sun, 3 Apr 2011 12:00:10 +0000 (14:00 +0200)]
m68k: bitops - Never step beyond the end of the bitmap
find_next bitops on m68k (find_next_zero_bit, find_next_bit, and
find_next_bit_le) may cause out of bounds memory access
when the bitmap size in bits % 32 != 0 and offset (the bitnumber
to start searching at) is very close to the bitmap size.
For example,
unsigned long bitmap[2] = { 0, 0 };
find_next_bit(bitmap, 63, 62);
1. find_next_bit() tries to find any set bits in bitmap[1],
but no bits set.
2. Then find_first_bit(bimap + 2, -1)
3. Unfortunately find_first_bit() takes unsigned int as the size argument.
4. find_first_bit will access bitmap[2~] until it find any set bits.
Add missing tests for stepping beyond the end of the bitmap to all
find_{first,next}_*() functions, and make sure they never return a value
larger than the bitmap size.
Reported-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Geert Uytterhoeven [Sun, 3 Apr 2011 11:32:00 +0000 (13:32 +0200)]
m68k: bitops - offset == ((long)p - (long)vaddr) * 8
Hence use "offset" in find_next_{,zero_}bit(), like is already done for
find_next_{,zero_}bit_le()
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Daniel Kiper [Wed, 4 May 2011 18:19:49 +0000 (20:19 +0200)]
drivers/xen/sys-hypervisor: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Daniel Kiper [Wed, 4 May 2011 18:18:05 +0000 (20:18 +0200)]
arch/x86/xen/smp: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Daniel Kiper [Wed, 4 May 2011 18:18:45 +0000 (20:18 +0200)]
arch/x86/xen/time: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Daniel Kiper [Wed, 4 May 2011 18:19:15 +0000 (20:19 +0200)]
arch/x86/xen/xen-ops: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Daniel Kiper [Thu, 12 May 2011 21:19:53 +0000 (17:19 -0400)]
arch/x86/xen/mmu: Cleanup code/data sections definitions
Cleanup code/data sections definitions
accordingly to include/linux/init.h.
Signed-off-by: Daniel Kiper <dkiper@net-space.pl>
[v1: Rebased on top of latest linus's to include fixes in mmu.c]
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tian, Kevin [Fri, 6 May 2011 06:43:56 +0000 (14:43 +0800)]
x86: Don't unmask disabled irqs when migrating them
It doesn't make sense to unconditionally unmask a disabled irq when
migrating it from offlined cpu to another. If the irq triggers then it
will be disabled in the interrupt handler anyway. So we can just avoid
unmasking it.
[ tglx: Made masking unconditional again and fixed the changelog ]
Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E3%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tian, Kevin [Fri, 6 May 2011 06:43:36 +0000 (14:43 +0800)]
x86: Skip migrating IRQF_PER_CPU irqs in fixup_irqs()
IRQF_PER_CPU means that the irq cannot be moved away from a given
cpu. So it must not be migrated when the cpu goes offline.
[ tglx: massaged changelog ]
Signed-off-by: Fengzhe Zhang <fengzhe.zhang@intel.com>
Signed-off-by: Kevin Tian <kevin.tian@intel.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Jan Beulich <JBeulich@novell.com>
Cc: "xen-devel@lists.xensource.com" <xen-devel@lists.xensource.com>
Link: http://lkml.kernel.org/r/%3C625BA99ED14B2D499DC4E29D8138F1505C8ED7F7E2%40shsmsx502.ccr.corp.intel.com%3E
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Ingo Molnar [Thu, 19 May 2011 12:01:42 +0000 (14:01 +0200)]
perf stat: Add more cache-miss percentage printouts
Print out the cache-miss percentage as well if the cache refs were
collected, for all the generic cache event types.
Before:
11,103,723,230 dTLB-loads # 622.471 M/sec ( +- 0.30% )
87,065,337 dTLB-load-misses # 4.881 M/sec ( +- 0.90% )
After:
11,353,713,242 dTLB-loads # 626.020 M/sec ( +- 0.35% )
113,393,472 dTLB-load-misses # 1.00% of all dTLB cache hits ( +- 0.49% )
Also ASCII color highlight too high percentages, them when it's executed on the console.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-lkhwxsevdbd9a8nymx0vxc3y@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar [Thu, 19 May 2011 11:30:56 +0000 (13:30 +0200)]
perf stat: Add -d -d and -d -d -d options to show more CPU events
Print even more detailed statistics if requested via perf stat -d:
-d: detailed events, L1 and LLC data cache
-d -d: more detailed events, dTLB and iTLB events
-d -d -d: very detailed events, adding prefetch events
Full output looks like this now:
Performance counter stats for '/home/mingo/hackbench 10' (5 runs):
1703.674707 task-clock # 8.709 CPUs utilized ( +- 4.19% )
49,068 context-switches # 0.029 M/sec ( +- 16.66% )
8,303 CPU-migrations # 0.005 M/sec ( +- 24.90% )
17,397 page-faults # 0.010 M/sec ( +- 0.46% )
2,345,389,239 cycles # 1.377 GHz ( +- 4.61% ) [55.90%]
1,884,503,527 stalled-cycles-frontend # 80.35% frontend cycles idle ( +- 5.67% ) [50.39%]
743,919,737 stalled-cycles-backend # 31.72% backend cycles idle ( +- 8.75% ) [49.91%]
1,314,416,379 instructions # 0.56 insns per cycle
# 1.43 stalled cycles per insn ( +- 2.53% ) [60.87%]
272,592,567 branches # 160.003 M/sec ( +- 1.74% ) [56.56%]
3,794,846 branch-misses # 1.39% of all branches ( +- 6.59% ) [58.50%]
449,982,778 L1-dcache-loads # 264.125 M/sec ( +- 2.47% ) [49.88%]
22,404,961 L1-dcache-load-misses # 4.98% of all L1-dcache hits ( +- 6.08% ) [55.05%]
6,204,750 LLC-loads # 3.642 M/sec ( +- 8.91% ) [43.75%]
1,837,411 LLC-load-misses # 1.078 M/sec ( +- 7.27% ) [12.07%]
411,440,421 L1-icache-loads # 241.502 M/sec ( +- 5.60% ) [36.52%]
27,556,832 L1-icache-load-misses # 16.175 M/sec ( +- 7.46% ) [46.72%]
464,067,627 dTLB-loads # 272.392 M/sec ( +- 4.46% ) [54.17%]
10,765,648 dTLB-load-misses # 6.319 M/sec ( +- 3.18% ) [48.68%]
1,273,080,386 iTLB-loads # 747.256 M/sec ( +- 3.38% ) [47.53%]
117,481 iTLB-load-misses # 0.069 M/sec ( +- 14.99% ) [47.01%]
4,590,653 L1-dcache-prefetches # 2.695 M/sec ( +- 4.49% ) [46.19%]
1,712,660 L1-dcache-prefetch-misses # 1.005 M/sec ( +- 3.75% ) [44.82%]
0.
195622057 seconds time elapsed ( +- 6.84% )
Also clean up the attribute construction code to be appending, and factor
it out into add_default_attributes().
Tweak the coverage percentage printout a bit, so that it's easier to view it
alongside the +- sttddev colum.
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/n/tip-to3kgu04449s64062val8b62@git.kernel.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Thomas Gleixner [Wed, 18 May 2011 21:33:43 +0000 (21:33 +0000)]
x86: hpet: Cleanup the clockevents init and register code
No need to recalculate the frequency and the conversion factors over
and over. Calculate the frequency once and use the new config/register
interface and let the core code do the math.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.646482357%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:42 +0000 (21:33 +0000)]
x86: Convert PIT to clockevents_config_and_register()
Let the core do the work.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.545615675%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:42 +0000 (21:33 +0000)]
clockevents: Provide interface to reconfigure an active clock event device
Some ARM SoCs have clock event devices which have their frequency
modified due to frequency scaling. Provide an interface which allows
to reconfigure an active device. After reconfiguration reprogram the
current pending event.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.437459958%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:41 +0000 (21:33 +0000)]
clockevents: Provide combined configure and register function
All clockevent devices have the same open coded initialization
functions. Provide an interface which does all necessary
initialization in the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.331975870%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:41 +0000 (21:33 +0000)]
clockevents: Restructure clock_event_device members
Group the hot path members of struct clock_event_device together so we
have a better cache line footprint. Make it cacheline aligned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.223607682%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:40 +0000 (21:33 +0000)]
clocksource: Get rid of the hardcoded 5 seconds sleep time limit
Slow clocksources can have a way longer sleep time than 5 seconds and
even fast ones can easily cope with 600 seconds and still maintain
proper accuracy.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.109811585%40linutronix.de%3E
Thomas Gleixner [Wed, 18 May 2011 21:33:40 +0000 (21:33 +0000)]
clocksource: Restructure clocksource struct members
Group the hot path members of struct clocksource together so we have a
better cache line footprint. Make it cacheline aligned.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
Link: http://lkml.kernel.org/r/%3C20110518210136.003081882%40linutronix.de%3E
Michal Marek [Tue, 17 May 2011 13:36:46 +0000 (15:36 +0200)]
ftrace/kbuild: Add recordmcount files to force full build
Modifications to recordmcount must be performed on all object
files to stay consistent with what the kernel code may expect.
Add the recordmcount files to the main dependencies to make sure
any change to them causes a full recompile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Link: http://lkml.kernel.org/r/20110517133646.GP13293@sepie.suse.cz
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Ralf Baechle [Thu, 19 May 2011 08:21:33 +0000 (09:21 +0100)]
MIPS: Move arch_get_unmapped_area and gang to new file.
It never really belonged into syscall.c and it's about to become well more
complex.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Tue, 17 May 2011 15:18:09 +0000 (16:18 +0100)]
MIPS: Cleanup arch_get_unmapped_area
As noticed by Kevin Cernekee <cernekee@gmail.com> in
http://www.linux-mips.org/cgi-bin/extract-mesg.cgi?a=linux-mips&m=2011-05&i=BANLkTikq04wuK%3Dbz%2BLieavmm3oDtoYWKxg%40mail.gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/2387/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 17 Feb 2011 22:47:52 +0000 (14:47 -0800)]
MIPS: Octeon: Don't request interrupts for unused IPI mailbox bits.
We only use the three low-order mailbox bits. Leave the upper bits alone
for possible use by drivers and other software.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2090/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Chandrakala Chavva [Thu, 17 Feb 2011 21:57:52 +0000 (13:57 -0800)]
Octeon: Fix interrupt irq settings for performance counters.
Octeon uses different interrupt irq for timer and performance counters.
Set CvmCtl[IPPCI] to correct irq value very early.
Signed-off-by: Chandrakala Chavva <cchavva@caviumnetworks.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Cc: Chandrakala Chavva <cchavva@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/2085/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wanlong Gao [Sat, 9 Apr 2011 19:04:18 +0000 (03:04 +0800)]
MIPS: Fix build warnings on defconfigs
Since
d45dcef77019012fc6769e657fc2f1a5d681bbbb ["Bluetooth: Fix BT_L2CAP
and BT_SCO in Kconfig"] BT_L2CAP=m and BT_SCO=m are no longer valid so
change the settings from m to y.
[ralf@linux-mips.org: Merging only the MIPS parts of this patch.]
Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
To: akpm@linux-foundation.org
To: manuel.lauss@googlemail.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: linuxppc-dev@lists.ozlabs.org
Patchwork: https://patchwork.linux-mips.org/patch/2277/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Wanlong Gao [Sat, 9 Apr 2011 17:42:17 +0000 (01:42 +0800)]
MIPS: Lemote 2F, Malta: Fix build warning
Since
5ada28bf76752e33dce3d807bf0dfbe6d1b943ad ["led-class: always
implement blinking"] LEDS_CLASS=m is no longer valid so change the setting
from m to y.
Signed-off-by: Wanlong Gao <wanlong.gao@gmail.com>
To: david.woodhouse@intel.com
To: akpm@linux-foundation.org
To: mingo@elte.hu
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2276/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Robert Millan [Sat, 16 Apr 2011 18:29:29 +0000 (11:29 -0700)]
MIPS: Set ELF AT_PLATFORM string for Loongson2 processors
Signed-off-by: Robert Millan <rmh@gnu.org>
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2302/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Kevin Cernekee [Sat, 16 Apr 2011 18:29:28 +0000 (11:29 -0700)]
MIPS: Set ELF AT_PLATFORM string for BMIPS processors
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Cc: Robert Millan <rmh@gnu.org>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2300/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Robert Millan [Mon, 18 Apr 2011 18:37:55 +0000 (11:37 -0700)]
MIPS: Introduce set_elf_platform() helper function
Replace these sequences:
if (cpu == 0)
__elf_platform = "foo";
with a trivial inline function.
Signed-off-by: Robert Millan <rmh@gnu.org>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: wu zhangjin <wuzhangjin@gmail.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/2304/
Patchwork: https://patchwork.linux-mips.org/patch/2374/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Maarten ter Huurne [Mon, 2 May 2011 09:47:00 +0000 (11:47 +0200)]
MIPS: JZ4740: setup: Autodetect physical memory.
Assume that the boot loader knows the physical memory of the system and
deduce that information from the contents of the SDRAM control register.
It is still possible to override with with the "mem=" parameter, but we
have a sensible default now.
Signed-off-by: Maarten ter Huurne <maarten@treewalker.org>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2319/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Tue, 10 May 2011 21:31:34 +0000 (23:31 +0200)]
MIPS: BCM47xx: Fix MAC address parsing.
Some devices like the Netgear WGT634u are using minuses between the blocks
of the MAC address and other devices are using colons to separate them.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2366/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Tue, 10 May 2011 21:31:33 +0000 (23:31 +0200)]
MIPS: BCM47xx: Extend the filling of SPROM from NVRAM
Some members of the struct ssb_sprom where not filled with data available
in the NVRAM. Some attribute names in the NVRAM changed from SPROM version
3 to version 4. This patch was done by analyzing the the pci sprom parser
in the ssb code and some open source parts of the braodcom wireless driver
used on embedded devices.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2365/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Tue, 10 May 2011 21:31:32 +0000 (23:31 +0200)]
MIPS: BCM47xx: Register SSB fallback sprom callback
We are generating the prefix based on the PCI bus address the device is
on. This is done like Broadcom does it in their code expect that the the
bus number is increased by one. In the SB bus implementation used by
Broadcom the SB bus emulates a PCI bus so the kernel sees one PCI bus
more then in our implementation. We do not handle prefixes like sb/1/
yet as they are only used on the new bus which is not implemented yet.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2364/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Hauke Mehrtens [Tue, 10 May 2011 21:31:31 +0000 (23:31 +0200)]
MIPS: BCM47xx: Extend bcm47xx_fill_sprom with prefix.
When an other SSB based device without an own SPROM is attached, using the
PCI bus to the main SSB based device, the data normally found in the SPROM
will be stored in the NVRAM on modern devices. The keys, to load the data
from the NVRAM, are all using some sort of prefix like pci/1/1/, pci/1/3/
or sb/1/ before the actual key. This patch extends bcm47xx_fill_sprom() to
make it possible to read out these values when some prefix was used.
The keys for the SPROM data used on the main chip does not have a prefix.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2363/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
projects / profile / ivi / kernel-x86-ivi.git / log