Masahiro Yamada [Mon, 9 Sep 2019 10:53:17 +0000 (19:53 +0900)]
export.h, genksyms: do not make genksyms calculate CRC of trimmed symbols
Arnd Bergmann reported false-positive modpost warnings detected by his
randconfig testing of linux-next.
Actually, this happens under the combination of CONFIG_MODVERSIONS
and CONFIG_TRIM_UNUSED_KSYMS since commit
15bfc2348d54 ("modpost:
check for static EXPORT_SYMBOL* functions").
For example, arch/arm/config/multi_v7_defconfig + CONFIG_MODVERSIONS
+ CONFIG_TRIM_UNUSED_KSYMS produces the following false-positives:
WARNING: "__lshrdi3" [vmlinux] is a static (unknown)
WARNING: "__ashrdi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_lasr" [vmlinux] is a static (unknown)
WARNING: "__aeabi_llsr" [vmlinux] is a static (unknown)
WARNING: "ftrace_set_clr_event" [vmlinux] is a static (unknown)
WARNING: "__muldi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_ulcmp" [vmlinux] is a static (unknown)
WARNING: "__ucmpdi2" [vmlinux] is a static (unknown)
WARNING: "__aeabi_lmul" [vmlinux] is a static (unknown)
WARNING: "__bswapsi2" [vmlinux] is a static (unknown)
WARNING: "__bswapdi2" [vmlinux] is a static (unknown)
WARNING: "__ashldi3" [vmlinux] is a static (unknown)
WARNING: "__aeabi_llsl" [vmlinux] is a static (unknown)
The root cause of the problem is not in the modpost, but in the
implementation of CONFIG_TRIM_UNUSED_KSYMS.
If there is at least one untrimmed symbol in the file, genksyms is
invoked to calculate CRC of *all* the exported symbols in that file
even if some of them have been trimmed due to no caller existing.
As a result, .tmp_*.ver files contain CRC of trimmed symbols, thus
unneeded, orphan __crc* symbols are added to objects. It had been
harmless until recently.
With commit
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL*
functions"), it is now harmful because the bogus __crc* symbols make
modpost call sym_update_crc() to add the symbols to the hash table,
but there is no one that clears the ->is_static member.
I gave Fixes to the first commit that uncovered the issue, but the
potential problem has long existed since commit
f235541699bc
("export.h: allow for per-symbol configurable EXPORT_SYMBOL()").
Fixes:
15bfc2348d54 ("modpost: check for static EXPORT_SYMBOL* functions")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Masahiro Yamada [Mon, 9 Sep 2019 10:53:16 +0000 (19:53 +0900)]
export.h: remove defined(__KERNEL__), which is no longer needed
The conditional, define(__KERNEL__), was added by commit
f235541699bc
("export.h: allow for per-symbol configurable EXPORT_SYMBOL()").
It was needed at that time to avoid the build error of modpost
with CONFIG_TRIM_UNUSED_KSYMS=y.
Since commit
b2c5cdcfd4bc ("modpost: remove symbol prefix support"),
modpost no longer includes linux/export.h, thus the define(__KERNEL__)
is unneeded.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Masahiro Yamada [Sat, 7 Sep 2019 02:52:36 +0000 (11:52 +0900)]
kbuild: allow Clang to find unused static inline functions for W=1 build
GCC and Clang have different policy for -Wunused-function; GCC does not
warn unused static inline functions at all whereas Clang does if they
are defined in source files instead of included headers although it has
been suppressed since commit
abb2ea7dfd82 ("compiler, clang: suppress
warning for unused static inline functions").
We often miss to delete unused functions where 'static inline' is used
in *.c files since there is no tool to detect them. Unused code remains
until somebody notices. For example, commit
075ddd75680f ("regulator:
core: remove unused rdev_get_supply()").
Let's remove __maybe_unused from the inline macro to allow Clang to
start finding unused static inline functions. For now, we do this only
for W=1 build since it is not a good idea to sprinkle warnings for the
normal build (e.g. 35 warnings for arch/x86/configs/x86_64_defconfig).
My initial attempt was to add -Wno-unused-function for no W= build
(https://lore.kernel.org/patchwork/patch/1120594/)
Nathan Chancellor pointed out that would weaken Clang's checks since
we would no longer get -Wunused-function without W=1. It is true GCC
would catch unused static non-inline functions, but it would weaken
Clang as a standalone compiler, at least.
Hence, here is a counter implementation. The current problem is, W=...
only controls compiler flags, which are globally effective. There is
no way to address only 'static inline' functions.
This commit defines KBUILD_EXTRA_WARN[123] corresponding to W=[123].
When KBUILD_EXTRA_WARN1 is defined, __maybe_unused is omitted from
the 'inline' macro.
The new macro __inline_maybe_unused makes the code a bit uglier, so I
hope we can remove it entirely after fixing most of the warnings.
If you contribute to code clean-up, please run "make CC=clang W=1"
and check -Wunused-function warnings. You will find lots of unused
functions.
Some of them are false-positives because the call-sites are disabled
by #ifdef. I do not like to abuse the inline keyword for suppressing
unused-function warnings because it is intended to be a hint for the
compiler optimization. I prefer #ifdef around the definition, or
__maybe_unused if #ifdef would make the code too ugly.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Masahiro Yamada [Sat, 31 Aug 2019 16:25:55 +0000 (01:25 +0900)]
kbuild: rename KBUILD_ENABLE_EXTRA_GCC_CHECKS to KBUILD_EXTRA_WARN
KBUILD_ENABLE_EXTRA_GCC_CHECKS started as a switch to add extra warning
options for GCC, but now it is a historical misnomer since we use it
also for Clang, DTC, and even kernel-doc.
Rename it to more sensible, shorter KBUILD_EXTRA_WARN.
For the backward compatibility, KBUILD_ENABLE_EXTRA_GCC_CHECKS is still
supported (but not advertised in the documentation).
I also fixed up 'make help', and updated the documentation.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Masahiro Yamada [Sat, 31 Aug 2019 16:25:54 +0000 (01:25 +0900)]
kbuild: refactor scripts/Makefile.extrawarn
Instead of the warning-[123] magic, let's accumulate compiler options
to KBUILD_CFLAGS directly as the top Makefile does. I think this makes
it easier to understand what is going on in this file.
This commit slightly changes the behavior, I think all of which are OK.
[1] Currently, cc-option calls are needlessly evaluated. For example,
warning-3 += $(call cc-option, -Wpacked-bitfield-compat)
needs evaluating only when W=3, but it is actually evaluated for
W=1, W=2 as well. With this commit, only relevant cc-option calls
will be evaluated. This is a slight optimization.
[2] Currently, unsupported level like W=4 is checked by:
$(error W=$(KBUILD_ENABLE_EXTRA_GCC_CHECKS) is unknown)
This will no longer be checked, but I do not think it is a big
deal.
[3] Currently, 4 Clang warnings (Winitializer-overrides, Wformat,
Wsign-compare, Wformat-zero-length) are shown by any of W=1, W=2,
and W=3. With this commit, they will be warned only by W=1. I
think this is a more correct behavior since each warning belongs
to only one group.
For understanding this commit correctly:
We have 3 warning groups, W=1, W=2, and W=3. You may think W=3 has a
higher level than W=1, but they are actually independent. If you like,
you can combine them like W=13. To enable all the warnings, you can
pass W=123. It is shown by 'make help', but not noticed much. Since we
support W= combination, there should not exist intersection among the
three groups. If we enable Winitializer-overrides for W=1, we do not
need to for W=2 or W=3. This is the reason why I think the change [3]
makes sense.
The documentation says -Winitializer-overrides is enabled by default.
(https://clang.llvm.org/docs/DiagnosticsReference.html#winitializer-overrides)
We negate it by passing -Wno-initializer-overrides for the normal
build, but we do not do that for W=1. This means, W=1 effectively
enables -Winitializer-overrides by the clang's default. The same for
the other three.
Add comments in case people are confused with the code.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Guillaume Tucker [Mon, 2 Sep 2019 15:18:36 +0000 (16:18 +0100)]
merge_config.sh: ignore unwanted grep errors
The merge_config.sh script verifies that all the config options have
their expected value in the resulting file and prints any issues as
warnings. These checks aren't intended to be treated as errors given
the current implementation. However, since "set -e" was added, if the
grep command to look for a config option does not find it the script
will then abort prematurely.
Handle the case where the grep exit status is non-zero by setting
ACTUAL_VAL to an empty string to restore previous functionality.
Fixes:
cdfca821571d ("merge_config.sh: Check error codes from make")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Fri, 30 Aug 2019 04:34:01 +0000 (13:34 +0900)]
kbuild: change *FLAGS_<basetarget>.o to take the path relative to $(obj)
Kbuild provides per-file compiler flag addition/removal:
CFLAGS_<basetarget>.o
CFLAGS_REMOVE_<basetarget>.o
AFLAGS_<basetarget>.o
AFLAGS_REMOVE_<basetarget>.o
CPPFLAGS_<basetarget>.lds
HOSTCFLAGS_<basetarget>.o
HOSTCXXFLAGS_<basetarget>.o
The <basetarget> is the filename of the target with its directory and
suffix stripped.
This syntax comes into a trouble when two files with the same basename
appear in one Makefile, for example:
obj-y += foo.o
obj-y += dir/foo.o
CFLAGS_foo.o := <some-flags>
Here, the <some-flags> applies to both foo.o and dir/foo.o
The real world problem is:
scripts/kconfig/util.c
scripts/kconfig/lxdialog/util.c
Both files are compiled into scripts/kconfig/mconf, but only the
latter should be given with the ncurses flags.
It is more sensible to use the relative path to the Makefile, like this:
obj-y += foo.o
CFLAGS_foo.o := <some-flags>
obj-y += dir/foo.o
CFLAGS_dir/foo.o := <other-flags>
At first, I attempted to replace $(basetarget) with $*. The $* variable
is replaced with the stem ('%') part in a pattern rule. This works with
most of cases, but does not for explicit rules.
For example, arch/ia64/lib/Makefile reuses rule_as_o_S in its own
explicit rules, so $* will be empty, resulting in ignoring the per-file
AFLAGS.
I introduced a new variable, target-stem, which can be used also from
explicit rules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Denis Efremov [Tue, 27 Aug 2019 12:20:23 +0000 (15:20 +0300)]
modpost: add NOFAIL to strndup
Add NOFAIL check for the strndup call, because the function
allocates memory and can return NULL. All calls to strdup in
modpost are checked with NOFAIL.
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Heikki Krogerus [Tue, 27 Aug 2019 11:14:37 +0000 (14:14 +0300)]
modpost: add guid_t type definition
Since guid_t is the recommended data type for UUIDs in
kernel (and I guess uuid_le is meant to be ultimately
replaced with it), it should be made available here as
well.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 25 Aug 2019 13:28:37 +0000 (22:28 +0900)]
kbuild: add $(BASH) to run scripts with bash-extension
CONFIG_SHELL falls back to sh when bash is not installed on the system,
but nobody is testing such a case since bash is usually installed.
So, shell scripts invoked by CONFIG_SHELL are only tested with bash.
It makes it difficult to test whether the hashbang #!/bin/sh is real.
For example, #!/bin/sh in arch/powerpc/kernel/prom_init_check.sh is
false. (I fixed it up)
Besides, some shell scripts invoked by CONFIG_SHELL use bash-extension
and #!/bin/bash is specified as the hashbang, while CONFIG_SHELL may
not always be set to bash.
Probably, the right thing to do is to introduce BASH, which is bash by
default, and always set CONFIG_SHELL to sh. Replace $(CONFIG_SHELL)
with $(BASH) for bash scripts.
If somebody tries to add bash-extension to a #!/bin/sh script, it will
be caught in testing because /bin/sh is a symlink to dash on some major
distributions.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 20 Aug 2019 17:09:41 +0000 (02:09 +0900)]
kbuild: remove ARCH_{CPP,A,C}FLAGS
These flags were added by commit
61754c18752f ("kbuild: Allow arch
Makefiles to override {cpp,ld,c}flags") to allow ARC to override -O2.
We did not see any other usage after all. Now that ARC switched to
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3, there is no more user of
these variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 20 Aug 2019 17:09:40 +0000 (02:09 +0900)]
kbuild,arc: add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3 for ARC
arch/arc/Makefile overrides -O2 with -O3. This is the only user of
ARCH_CFLAGS. There is no user of ARCH_CPPFLAGS or ARCH_AFLAGS.
My plan is to remove ARCH_{CPP,A,C}FLAGS after refactoring the ARC
Makefile.
Currently, ARC has no way to enable -Wmaybe-uninitialized because both
-O3 and -Os disable it. Enabling it will be useful for compile-testing.
This commit allows allmodconfig (, which defaults to -O2) to enable it.
Add CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3=y to all the defconfig files
in arch/arc/configs/ in order to keep the current config settings.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Nathan Chancellor [Tue, 27 Aug 2019 00:41:55 +0000 (17:41 -0700)]
kbuild: Do not enable -Wimplicit-fallthrough for clang for now
This functionally reverts commit
bfd77145f35c ("Makefile: Convert
-Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang").
clang enabled support for -Wimplicit-fallthrough in C in r369414 [1],
which causes a lot of warnings when building the kernel for two reasons:
1. Clang does not support the /* fall through */ comments. There seems
to be a general consensus in the LLVM community that this is not
something they want to support. Joe Perches wrote a script to convert
all of the comments to a "fallthrough" keyword that will be added to
compiler_attributes.h [2] [3], which catches the vast majority of the
comments. There doesn't appear to be any consensus in the kernel
community when to do this conversion.
2. Clang and GCC disagree about falling through to final case statements
with no content or cases that simply break:
https://godbolt.org/z/c8csDu
This difference contributes at least 50 warnings in an allyesconfig
build for x86, not considering other architectures. This difference
will need to be discussed to see which compiler is right [4] [5].
[1]: https://github.com/llvm/llvm-project/commit/
1e0affb6e564b7361b0aadb38805f26deff4ecfc
[2]: https://lore.kernel.org/lkml/
61ddbb86d5e68a15e24ccb06d9b399bbf5ce2da7.camel@perches.com/
[3]: https://lore.kernel.org/lkml/
1d2830aadbe9d8151728a7df5b88528fc72a0095.
1564549413.git.joe@perches.com/
[4]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91432
[5]: https://github.com/ClangBuiltLinux/linux/issues/636
Given these two problems need discussion and coordination, do not enable
-Wimplicit-fallthrough with clang right now. Add a comment to explain
what is going on as well. This commit should be reverted once these two
issues are fully flushed out and resolved.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 25 Aug 2019 01:31:39 +0000 (10:31 +0900)]
kbuild: clean up subdir-ymn calculation in Makefile.clean
Remove some variables.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 25 Aug 2019 01:31:28 +0000 (10:31 +0900)]
kbuild: remove unneeded '+' marker from cmd_clean
This '+' was added a long time ago:
| commit
c23e6bf05f7802e92fd3da69a1ed35e56f9c85bb (HEAD)
| Author: Kai Germaschewski <kai@tp1.ruhr-uni-bochum.de>
| Date: Mon Oct 28 01:16:34 2002 -0600
|
| kbuild: Fix a "make -j<N>" warning
|
| diff --git a/scripts/Makefile.clean b/scripts/Makefile.clean
| index
2c843e0380bc..
e7c392fd5788 100644
| --- a/scripts/Makefile.clean
| +++ b/scripts/Makefile.clean
| @@ -42,7 +42,7 @@ quiet_cmd_clean = CLEAN $(obj)
|
| __clean: $(subdir-ymn)
| ifneq ($(strip $(__clean-files) $(clean-rule)),)
| - $(call cmd,clean)
| + +$(call cmd,clean)
| else
| @:
| endif
At that time, cmd_clean contained $(clean-rule), which was able to
invoke sub-make. That was why cleaning with the -j option showed:
warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
It is not the case any more; cmd_clean now just runs the 'rm' command.
The '+' marker is pointless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sun, 25 Aug 2019 01:31:27 +0000 (10:31 +0900)]
kbuild: remove clean-dirs syntax
The only the difference between clean-files and clean-dirs is the -r
option passed to the 'rm' command.
You can always pass -r, and then remove the clean-dirs syntax.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:13 +0000 (13:46 +0900)]
kbuild: check clean srctree even earlier
Move the outputmakefile target to the leftmost in the prerequisite list
so that this is checked first. GNU Make processes the prerequisites
left to right.
GNU Make will keep to stick to this behavior, and it seems even
POSIX standard, according to this:
https://lists.gnu.org/archive/html/bug-make/2019-08/msg00030.html
The POSIX standard of make is available here:
https://pubs.opengroup.org/onlinepubs/
9699919799/utilities/make.html
Of course, when the parallel option -j given, other targets will be run
simultaneously but it is nice to show the error as early as possible.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:12 +0000 (13:46 +0900)]
kbuild: remove prepare3 target
Now prepare3 does nothing but depends on include/config/kernel.release
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:11 +0000 (13:46 +0900)]
kbuild: move the clean srctree check to the outputmakefile target
With this commit, the error report is shown earlier, even before
running kconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:10 +0000 (13:46 +0900)]
kbuild: clarify where to run make mrproper when out-of-tree fails
If you try out-of-tree build with an unclean source tree, Kbuild
suggests to run make mrproper. The path to the source tree may be
shown with a relative path, for example, "make O=foo" emits the
following:
.. is not clean, please run 'make mrproper'
in the '..' directory.
This is somewhat confusing if you ran "make O=foo" in the source tree.
Using the absolute path will be clearer.
This commit changes the error message like follows:
***
*** The source tree is not clean, please run 'make mrproper'
*** in /absolute/path/to/linux
***
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:09 +0000 (13:46 +0900)]
kbuild: Inform user to pass ARCH= for make mrproper only when necessary
Since commit
3a475b2166fd ("kbuild: Inform user to pass ARCH= for make
mrproper"), if you try out-of-tree build with an unclean source tree,
it suggests to run 'make ARCH=<ARCH> mrproper'.
This looks odd when you are not cross-compiling the kernel. Show the
'ARCH=<ARCH>' part only when ARCH= was given from the command line.
If ARCH is the default (native build) or came from the environment,
it should simply suggest 'make mrproper' as before.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 04:46:08 +0000 (13:46 +0900)]
kbuild: remove 'Using ... as source for kernel' message
You already know the location of the source tree without this message.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 22 Aug 2019 03:59:11 +0000 (12:59 +0900)]
kbuild: get rid of $(realpath ...) from scripts/mkmakefile
Both relative path and absolute path have pros and cons. For example,
we can move the source and objtree around together by using the
relative path to the source tree.
Do not force the absolute path to the source tree. If you prefer the
absolute path, you can specify KBUILD_ABS_SRCTREE=1.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 17:33:21 +0000 (02:33 +0900)]
kbuild: remove unneeded dependency for $(DOC_TARGETS)
Commit
415008af3219 ("docs-rst: convert lsm from DocBook to ReST")
stopped using if_changed_rule. There is no more users of if_changed*
for the doc targets. Hence, fixdep is unneeded. Remove the dependency
on scripts_basic.
All the doc targets are phony. The dependency on FORCE is not needed
either.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 17:32:47 +0000 (02:32 +0900)]
kbuild: remove unneeded comments and code from scripts/basic/Makefile
Kbuild descends into scripts/basic/ even before the Kconfig.
I do not expect any other host programs added to this Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 20 Aug 2019 17:09:39 +0000 (02:09 +0900)]
init/Kconfig: rework help of CONFIG_CC_OPTIMIZE_FOR_SIZE
CONFIG_CC_OPTIMIZE_FOR_SIZE was originally an independent boolean
option, but commit
877417e6ffb9 ("Kbuild: change CC_OPTIMIZE_FOR_SIZE
definition") turned it into a choice between _PERFORMANCE and _SIZE.
The phrase "If unsure, say N." sounds like an independent option.
Reword the help text to make it appropriate for the choice menu.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 10:54:00 +0000 (19:54 +0900)]
docs: kbuild: remove cc-ldoption from document again
Commit
055efab3120b ("kbuild: drop support for cc-ldoption") correctly
removed the cc-ldoption from Documentation/kbuild/makefiles.txt, but
commit
cd238effefa2 ("docs: kbuild: convert docs to ReST and rename
to *.rst") revived it. I guess it was a rebase mistake.
Remove it again.
Fixes:
cd238effefa2 ("docs: kbuild: convert docs to ReST and rename to *.rst")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 10:53:59 +0000 (19:53 +0900)]
docs: kbuild: fix invalid ReST syntax
I see the following warnings when I open this document with a ReST
viewer, retext:
/home/masahiro/ref/linux/Documentation/kbuild/makefiles.rst:1142: (WARNING/2) Inline emphasis start-string without end-string.
/home/masahiro/ref/linux/Documentation/kbuild/makefiles.rst:1152: (WARNING/2) Inline emphasis start-string without end-string.
/home/masahiro/ref/linux/Documentation/kbuild/makefiles.rst:1154: (WARNING/2) Inline emphasis start-string without end-string.
These hunks were added by commit
e846f0dc57f4 ("kbuild: add support
for ensuring headers are self-contained") and commit
1e21cbfada87
("kbuild: support header-test-pattern-y"), respectively. They were
written not for ReST but for the plain text, and merged via the
kbuild tree.
In the same development cycle, this document was converted to ReST
by commit
cd238effefa2 ("docs: kbuild: convert docs to ReST and rename
to *.rst"), and merged via the doc sub-system.
Merging them together into Linus' tree resulted in the current situation.
To fix the syntax, surround the asterisks with back-quotes, and
use :: for the code sample.
Fixes:
39ceda5ce1b0 ("Merge tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 07:03:48 +0000 (16:03 +0900)]
kbuild: remove unneeded '+' marker from kselftest-merge
This line contains $(MAKE), so Make knows that it will invoke sub-make
without help of the '+' marker.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 07:02:04 +0000 (16:02 +0900)]
kbuild: pkg: rename scripts/package/Makefile to scripts/Makefile.package
scripts/package/Makefile does not use $(obj) or $(src) at all.
It actually generates files and directories in the top of $(objtree).
I do not see much sense in descending into scripts/package/.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 07:02:03 +0000 (16:02 +0900)]
kbuild: pkg: add package targets to PHONY instead of FORCE
These are not real targets. Adding them to PHONY is preferred.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 21 Aug 2019 07:02:02 +0000 (16:02 +0900)]
kbuild: pkg: clean up package files/dirs from the top Makefile
I am not a big fan of the $(objtree)/ hack for clean-files/clean-dirs.
These are created in the top of $(objtree), so let's clean them up
from the top Makefile.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Mark Brown [Mon, 19 Aug 2019 20:06:50 +0000 (21:06 +0100)]
merge_config.sh: Check error codes from make
When we execute make after merging the configurations we ignore any
errors it produces causing whatever is running merge_config.sh to be
unaware of any failures. This issue was noticed by Guillaume Tucker
while looking at problems with testing of clang only builds in KernelCI
which caused Kbuild to be unable to find a working host compiler.
This implementation was suggested by Yamada-san.
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 19 Aug 2019 08:58:43 +0000 (17:58 +0900)]
kbuild: move modkern_{c,a}flags to Makefile.lib from Makefile.build
Makefile.lib is included by Makefile.modfinal as well as Makefile.build.
Move modkern_cflags to Makefile.lib in order to simplify cmd_cc_o_c
in Makefile.modfinal. Move modkern_cflags as well for consistency.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Mon, 19 Aug 2019 05:54:20 +0000 (14:54 +0900)]
kbuild: add CONFIG_ASM_MODVERSIONS
Add CONFIG_ASM_MODVERSIONS. This allows to remove one if-conditional
nesting in scripts/Makefile.build.
scripts/Makefile.build is run every time Kbuild descends into a
sub-directory. So, I want to avoid $(wildcard ...) evaluation
where possible although computing $(wildcard ...) is so cheap that
it may not make measurable performance difference.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Masahiro Yamada [Mon, 19 Aug 2019 04:18:07 +0000 (13:18 +0900)]
.gitignore: ignore modules.order explicitly
The pattern '*.order' was added by commit
c6025f4c8bbe ("kbuild: ignore
*.order files") to ignore modules.order files.
I do not see any other user of the '.order' extension.
Ignore 'modules.order' explicitly instead of '*.order'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 16:06:23 +0000 (01:06 +0900)]
kbuild: split final module linking out into Makefile.modfinal
I think splitting the modpost and linking modules into separate
Makefiles will be useful especially when more complex build steps
come in. The main motivation of this commit is to integrate the
proposed klp-convert feature cleanly.
I moved the logging 'Building modules, stage 2.' to Makefile.modpost
to avoid the code duplication although I do not know whether or not
this message is needed in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 16:06:22 +0000 (01:06 +0900)]
kbuild: rebuild modules when module linker scripts are updated
Currently, the timestamp of module linker scripts are not checked.
Add them to the dependency of modules so they are correctly rebuilt.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 16:06:21 +0000 (01:06 +0900)]
kbuild: move KBUILD_LDS, KBUILD_VMLINUX_{OBJS,LIBS} to makefiles.rst
These three variables are not intended to be tweaked by users.
Move them from kbuild.rst to makefiles.rst.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 15:19:19 +0000 (00:19 +0900)]
treewide: remove dummy Makefiles for single targets
Now that the single target build descends into sub-directories in the
same way as the normal build, these dummy Makefiles are not needed
any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 14 Aug 2019 15:19:18 +0000 (00:19 +0900)]
kbuild: make single targets work more correctly
Currently, the single target build directly descends into the directory
of the target. For example,
$ make foo/bar/baz.o
... directly descends into foo/bar/.
On the other hand, the normal build usually descends one directory at
a time, i.e. descends into foo/, and then foo/bar/.
This difference causes some problems.
[1] miss subdir-asflags-y, subdir-ccflags-y in upper Makefiles
The options in subdir-{as,cc}flags-y take effect in the current
and its sub-directories. In other words, they are inherited
downward. In the example above, the single target will miss
subdir-{as,cc}flags-y if they are defined in foo/Makefile.
[2] could be built in a different directory
As Documentation/kbuild/modules.rst section 4.3 says, Kbuild can
handle files that are spread over several sub-directories.
The build rule of foo/bar/baz.o may not necessarily be specified in
foo/bar/Makefile. It might be specifies in foo/Makefile as follows:
[foo/Makefile]
obj-y := bar/baz.o
This often happens when a module is so big that its source files
are divided into sub-directories.
In this case, there is no Makefile in the foo/bar/ directory, yet
the single target descends into foo/bar/, then fails due to the
missing Makefile. You can still do 'make foo/bar/' for partial
building, but cannot do 'make foo/bar/baz.s'. I believe the single
target '%.s' is a useful feature for inspecting the compiler output.
Some modules work around this issue by putting an empty Makefile
in every sub-directory.
This commit fixes those problems by making the single target build
descend in the same way as the normal build does.
Another change is the single target build will observe the CONFIG
options. Previously, it allowed users to build the foo.o even when
the corresponding CONFIG_FOO is disabled:
obj-$(CONFIG_FOO) += foo.o
In the new behavior, the single target build will just fail and show
"No rule to make target ..." (or "Nothing to be done for ..." if the
stale object already exists, but cannot be updated).
The disadvantage of this commit is the build speed. Now that the
single target build visits every directory and parses lots of
Makefiles, it is slower than before. (But, I hope it will not be
too slow.)
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kees Cook [Tue, 13 Aug 2019 15:15:32 +0000 (08:15 -0700)]
kbuild: Parameterize kallsyms generation and correct reporting
When kallsyms generation happens, temporary vmlinux outputs are linked
but the quiet make output didn't report it, giving the impression that
the prior command is taking longer than expected.
Instead, report the linking step explicitly. While at it, this
consolidates the repeated "kallsyms generation step" into a single
function and removes the existing copy/pasting.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 17:01:35 +0000 (02:01 +0900)]
kbuild: re-implement detection of CONFIG options leaked to user-space
scripts/headers_check.pl can detect references to CONFIG options in
exported headers, but it has been disabled for more than a decade.
Reverting commit
7e3fa5614117 ("kbuild: drop check for CONFIG_ in
headers_check") would emit the following warnings for headers_check
on x86:
usr/include/mtd/ubi-user.h:283: leaks CONFIG_MTD_UBI_BEB_LIMIT to userspace where it is not valid
usr/include/linux/cm4000_cs.h:26: leaks CONFIG_COMPAT to userspace where it is not valid
usr/include/linux/pkt_cls.h:301: leaks CONFIG_NET_CLS_ACT to userspace where it is not valid
usr/include/linux/videodev2.h:2465: leaks CONFIG_VIDEO_ADV_DEBUG to userspace where it is not valid
usr/include/linux/bpf.h:249: leaks CONFIG_EFFICIENT_UNALIGNED_ACCESS to userspace where it is not valid
usr/include/linux/bpf.h:819: leaks CONFIG_CGROUP_NET_CLASSID to userspace where it is not valid
usr/include/linux/bpf.h:1011: leaks CONFIG_IP_ROUTE_CLASSID to userspace where it is not valid
usr/include/linux/bpf.h:1742: leaks CONFIG_BPF_KPROBE_OVERRIDE to userspace where it is not valid
usr/include/linux/bpf.h:1747: leaks CONFIG_FUNCTION_ERROR_INJECTION to userspace where it is not valid
usr/include/linux/bpf.h:1936: leaks CONFIG_XFRM to userspace where it is not valid
usr/include/linux/bpf.h:2184: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2210: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2227: leaks CONFIG_SOCK_CGROUP_DATA to userspace where it is not valid
usr/include/linux/bpf.h:2311: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/bpf.h:2348: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/bpf.h:2422: leaks CONFIG_BPF_LIRC_MODE2 to userspace where it is not valid
usr/include/linux/bpf.h:2528: leaks CONFIG_NET to userspace where it is not valid
usr/include/linux/pktcdvd.h:37: leaks CONFIG_CDROM_PKTCDVD_WCACHE to userspace where it is not valid
usr/include/linux/hw_breakpoint.h:27: leaks CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to userspace where it is not valid
usr/include/linux/raw.h:17: leaks CONFIG_MAX_RAW_DEVS to userspace where it is not valid
usr/include/linux/elfcore.h:62: leaks CONFIG_BINFMT_ELF_FDPIC to userspace where it is not valid
usr/include/linux/eventpoll.h:82: leaks CONFIG_PM_SLEEP to userspace where it is not valid
usr/include/linux/atmdev.h:104: leaks CONFIG_COMPAT to userspace where it is not valid
usr/include/asm-generic/unistd.h:651: leaks CONFIG_MMU to userspace where it is not valid
usr/include/asm-generic/bitsperlong.h:9: leaks CONFIG_64BIT to userspace where it is not valid
usr/include/asm-generic/fcntl.h:119: leaks CONFIG_64BIT to userspace where it is not valid
usr/include/asm/auxvec.h:14: leaks CONFIG_IA32_EMULATION to userspace where it is not valid
usr/include/asm/e820.h:14: leaks CONFIG_NODES_SHIFT to userspace where it is not valid
usr/include/asm/e820.h:39: leaks CONFIG_X86_PMEM_LEGACY to userspace where it is not valid
usr/include/asm/e820.h:49: leaks CONFIG_INTEL_TXT to userspace where it is not valid
usr/include/asm/mman.h:7: leaks CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to userspace where it is not valid
Most of these are false positives because scripts/headers_check.pl
parses comment lines.
It is also false negative. arch/x86/include/uapi/asm/auxvec.h contains
CONFIG_IA32_EMULATION and CONFIG_X86_64, but the only former is reported.
It would be possible to fix scripts/headers_check.pl, of course.
However, we already have some duplicated checks between headers_check
and CONFIG_UAPI_HEADER_TEST. At this moment of time, there are still
dozens of headers excluded from the header test (usr/include/Makefile),
but we might be able to remove headers_check eventually.
I re-implemented it in scripts/headers_install.sh by using sed because
the most of code in scripts/headers_install.sh is written in sed.
This patch works like this:
[1] Run scripts/unifdef first because we need to drop the code
surrounded by #ifdef __KERNEL__ ... #endif
[2] Remove all C style comments. The sed code is somewhat complicated
since we need to deal with both single and multi line comments.
Precisely speaking, a comment block is replaced with a space just
in case.
CONFIG_FOO/* this is a comment */CONFIG_BAR
should be converted into:
CONFIG_FOO CONFIG_BAR
instead of:
CONFIG_FOOCONFIG_BAR
[3] Match CONFIG_... pattern. It correctly matches to all CONFIG
options that appear in a single line.
After this commit, this would detect the following warnings, all of
which are real ones.
warning: include/uapi/linux/pktcdvd.h: leak CONFIG_CDROM_PKTCDVD_WCACHE to user-space
warning: include/uapi/linux/hw_breakpoint.h: leak CONFIG_HAVE_MIXED_BREAKPOINTS_REGS to user-space
warning: include/uapi/linux/raw.h: leak CONFIG_MAX_RAW_DEVS to user-space
warning: include/uapi/linux/elfcore.h: leak CONFIG_BINFMT_ELF_FDPIC to user-space
warning: include/uapi/linux/eventpoll.h: leak CONFIG_PM_SLEEP to user-space
warning: include/uapi/linux/atmdev.h: leak CONFIG_COMPAT to user-space
warning: include/uapi/asm-generic/fcntl.h: leak CONFIG_64BIT to user-space
warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_IA32_EMULATION to user-space
warning: arch/x86/include/uapi/asm/auxvec.h: leak CONFIG_X86_64 to user-space
warning: arch/x86/include/uapi/asm/mman.h: leak CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS to user-space
However, it is not nice to show them right now. I created a list of
existing leakages. They are not warned, but a new leakage will be
blocked by the 0-day bot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:05 +0000 (00:53 +0900)]
kbuild: unify clean-dirs rule for in-kernel and external module
Factor out the duplicated code for in-kernel and external module
cleaning.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:04 +0000 (00:53 +0900)]
kbuild: unify vmlinux-dirs and module-dirs rules
The in-kernel build and external module build have similar code
for descending into sub-directories.
Factor out the code into the common place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:03 +0000 (00:53 +0900)]
kbuild: unset variables in top Makefile instead of setting 0
There is no need to set 0 to variables such as config-targets,
mixed-targets, etc.
Unset instead of setting 0 in order to use 'ifdef' to test them.
I also renamed:
config-targets -> config-build
mixed-targets -> mixed-build
dot-config -> need-config
to clarify what we are doing.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:02 +0000 (00:53 +0900)]
kbuild: do not descend to ./Kbuild when cleaning
'make clean' descends into ./Kbuild, but does not clean anything
since everything is added to no-clean-files.
There is no need to descend to ./Kbuild in the first place.
We can drop the no-clean-files assignment.
With this, there is no more user of no-clean-files. I will keep it
for a while to see whether a new user will appear.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:01 +0000 (00:53 +0900)]
kbuild: remove meaningless 'targets' in ./Kbuild
timeconst.h is generated by $(call filechk,...), missing-syscalls and
old-atomics are invoked by $(call cmd,...)
None of them needs to be added to 'targets'.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:53:00 +0000 (00:53 +0900)]
kbuild: remove 'make /' support
'make /' is just an alias for 'make ./'; this builds all objects of an
external module, but skips the modpost stage.
I am not a big fan of 'make /' since it looks as if it were touching
the root directory of the system. I like 'make ./' better.
I do not know how many people are using it, but let's show a hint if
it is used. Also, move it close to the external module rules since
this only makes sense for external modules.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:52:59 +0000 (00:52 +0900)]
kbuild: fix modkern_aflags implementation
For the single target building %.symtypes from %.S, $(a_flags) is
expanded into the _KERNEL flags even if the object is a part of a
module.
$(real-obj-m:.o=.symtypes): modkern_aflags := $(KBUILD_AFLAGS_MODULE) $(AFLAGS_MODULE)
... would fix the issue, but it is not nice to duplicate similar code
for every suffix.
Implement modkern_aflags in the same way as modkern_cflags.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:52:58 +0000 (00:52 +0900)]
kbuild: refactor part-of-module more
Make it even shorter.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 10 Aug 2019 15:52:57 +0000 (00:52 +0900)]
kbuild: move the Module.symvers check for external module build
$(objtree)/Module.symvers is not required for descending into
sub-directories. It is needed for the modpost stage.
Move the Module.symvers check to the right place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 6 Aug 2019 06:39:19 +0000 (15:39 +0900)]
kbuild: treat an object as multi-used when $(foo-) is set
Currently, Kbuild treats an object as multi-used when any of
$(foo-objs), $(foo-y), $(foo-m) is set. It makes more sense to
check $(foo-) as well.
In the context of foo-$(CONFIG_FOO_FEATURE1), CONFIG_FOO_FEATURE1
could be unset.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Wed, 31 Jul 2019 06:13:58 +0000 (15:13 +0900)]
kbuild: add [M] marker for build log of *.mod.o
This builds module objects, so [M] makes sense.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thomas Gleixner [Sun, 28 Jul 2019 18:27:41 +0000 (20:27 +0200)]
Kbuild: Handle PREEMPT_RT for version string and magic
Update the build scripts and the version magic to reflect when
CONFIG_PREEMPT_RT is enabled in the same way as CONFIG_PREEMPT is treated.
The resulting version strings:
Linux m 5.3.0-rc1+ #100 SMP Fri Jul 26 ...
Linux m 5.3.0-rc1+ #101 SMP PREEMPT Fri Jul 26 ...
Linux m 5.3.0-rc1+ #102 SMP PREEMPT_RT Fri Jul 26 ...
The module vermagic:
5.3.0-rc1+ SMP mod_unload modversions
5.3.0-rc1+ SMP preempt mod_unload modversions
5.3.0-rc1+ SMP preempt_rt mod_unload modversions
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 20 Jul 2019 16:27:40 +0000 (01:27 +0900)]
kbuild: move flex and bison rules to Makefile.host
Flex and bison are used for kconfig, dtc, genksyms, all of which are
host programs. I never imagine the kernel embeds a parser or a lexer.
Move the flex and bison rules to scripts/Makefile.host. This file is
included only when hostprogs-y etc. is present in the Makefile in the
directory. So, parsing these rules are skipped in most of directories.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 20 Jul 2019 16:27:39 +0000 (01:27 +0900)]
kbuild: make bison create C file and header in a single pattern rule
We generally expect bison to create not only a C file, but also a
header, which will be included from the lexer.
Currently, Kbuild generates them in separate rules. So, for instance,
when building Kconfig, you will notice bison is invoked twice:
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.h
HOSTCC scripts/kconfig/lexer.lex.o
YACC scripts/kconfig/parser.tab.c
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTLD scripts/kconfig/conf
Make handles such cases nicely in pattern rules [1]. Merge the two
rules so that one invokcation of bison can generate both of them.
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/confdata.o
HOSTCC scripts/kconfig/expr.o
LEX scripts/kconfig/lexer.lex.c
YACC scripts/kconfig/parser.tab.[ch]
HOSTCC scripts/kconfig/lexer.lex.o
HOSTCC scripts/kconfig/parser.tab.o
HOSTCC scripts/kconfig/preprocess.o
HOSTCC scripts/kconfig/symbol.o
HOSTLD scripts/kconfig/conf
[1] Pattern rule
GNU Make manual says:
"Pattern rules may have more than one target. Unlike normal rules,
this does not act as many different rules with the same prerequisites
and recipe. If a pattern rule has multiple targets, make knows that
the rule's recipe is responsible for making all of the targets. The
recipe is executed only once to make all the targets. When searching
for a pattern rule to match a target, the target patterns of a rule
other than the one that matches the target in need of a rule are
incidental: make worries only about giving a recipe and prerequisites
to the file presently in question. However, when this file's recipe is
run, the other targets are marked as having been updated themselves."
https://www.gnu.org/software/make/manual/html_node/Pattern-Intro.html
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Sat, 20 Jul 2019 16:27:38 +0000 (01:27 +0900)]
kbuild: use $(basename ...) for cmd_asn1_compiler
$(basename ...) trims the last suffix. Using it is more intuitive in
my opinion.
This pattern rule makes %.asn1.c and %.asn1.h at the same time.
Previously, the short log showed only either of them, depending on
the target file in question.
To clarify that two files are being generated by the single recipe,
I changed the log as follows:
Before:
ASN.1 crypto/asymmetric_keys/x509.asn1.c
After:
ASN.1 crypto/asymmetric_keys/x509.asn1.[ch]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Thomas Gleixner [Tue, 16 Jul 2019 19:47:27 +0000 (21:47 +0200)]
kbuild: Fail if gold linker is detected
The gold linker has known issues of failing the build both in random and in
predictible ways:
- The x86/X32 VDSO build fails with:
arch/x86/entry/vdso/vclock_gettime-x32.o:vclock_gettime.c:function do_hres:
error: relocation overflow: reference to 'hvclock_page'
That's a known issue for years and the usual workaround is to disable
CONFIG_X86_32
- A recent build failure is caused by turning a relocation into an
absolute one for unknown reasons. See link below.
- There are a couple of gold workarounds applied already, but reports
about broken builds with ld.gold keep coming in on a regular base and in
most cases the root cause is unclear.
In context of the most recent fail H.J. stated:
"Since building a workable kernel for different kernel configurations
isn't a requirement for gold, I don't recommend gold for kernel."
So instead of dealing with attempts to duct tape gold support without
understanding the root cause and without support from the gold folks, fail
the build when gold is detected.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/CAMe9rOqMqkQ0LNpm25yE_Yt0FKp05WmHOrwc0aRDb53miFKM+w@mail.gmail.com
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Denis Efremov [Thu, 1 Aug 2019 06:06:57 +0000 (09:06 +0300)]
modpost: check for static EXPORT_SYMBOL* functions
This patch adds a check to warn about static EXPORT_SYMBOL* functions
during the modpost. In most of the cases, a static symbol marked for
exporting is an odd combination that should be fixed either by deleting
the exporting mark or by removing the static attribute and adding the
appropriate declaration to headers.
This check could help to detect the following problems:
1.
550113d4e9f5 ("i2c: add newly exported functions to the header, too")
2.
54638c6eaf44 ("net: phy: make exported variables non-static")
3.
98ef2046f28b ("mm: remove the exporting of totalram_pages")
4.
73df167c819e ("s390/zcrypt: remove the exporting of ap_query_configuration")
5.
a57caf8c527f ("sunrpc/cache: remove the exporting of cache_seq_next")
6.
e4e4730698c9 ("crypto: skcipher - remove the exporting of skcipher_walk_next")
7.
14b4c48bb1ce ("gve: Remove the exporting of gve_probe")
8.
9b79ee9773a8 ("scsi: libsas: remove the exporting of sas_wait_eh")
9. ...
The build time impact is very limited and is almost at the unnoticeable
level (< 1 sec).
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Denis Efremov <efremov@linux.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Linus Torvalds [Sun, 11 Aug 2019 20:26:41 +0000 (13:26 -0700)]
Linux 5.3-rc4
Linus Torvalds [Sun, 11 Aug 2019 20:15:10 +0000 (13:15 -0700)]
Merge tag 'dax-fixes-5.3-rc4' of git://git./linux/kernel/git/nvdimm/nvdimm
Pull dax fixes from Dan Williams:
"A filesystem-dax and device-dax fix for v5.3.
The filesystem-dax fix is tagged for stable as the implementation has
been mistakenly throwing away all cow pages on any truncate or hole
punch operation as part of the solution to coordinate device-dma vs
truncate to dax pages.
The device-dax change fixes up a regression this cycle from the
introduction of a common 'internal per-cpu-ref' implementation.
Summary:
- Fix dax_layout_busy_page() to not discard private cow pages of
fs/dax private mappings.
- Update the memremap_pages core to properly cleanup on behalf of
internal reference-count users like device-dax"
* tag 'dax-fixes-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
mm/memremap: Fix reuse of pgmap instances with internal references
dax: dax_layout_busy_page() should not unmap cow pages
Linus Torvalds [Sun, 11 Aug 2019 17:13:53 +0000 (10:13 -0700)]
Merge tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb
Pull NTB fix from Jon Mason:
"Bug fix for NTB MSI kernel compile warning"
* tag 'ntb-5.3-bugfixes' of git://github.com/jonmason/ntb:
NTB/msi: remove incorrect MODULE defines
Linus Torvalds [Sat, 10 Aug 2019 23:31:47 +0000 (16:31 -0700)]
Merge tag 'riscv/for-v5.3-rc4' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V updates from Paul Walmsley:
"A few minor RISC-V updates for v5.3-rc4:
- Remove __udivdi3() from the 32-bit Linux port, converting the only
upstream user to use do_div(), per Linux policy
- Convert the RISC-V standard clocksource away from per-cpu data
structures, since only one is used by Linux, even on a multi-CPU
system
- A set of DT binding updates that remove an obsolete text binding in
favor of a YAML binding, fix a bogus compatible string in the
schema (thus fixing a "make dtbs_check" warning), and clarifies the
future values expected in one of the RISC-V CPU properties"
* tag 'riscv/for-v5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
dt-bindings: riscv: fix the schema compatible string for the HiFive Unleashed board
dt-bindings: riscv: remove obsolete cpus.txt
RISC-V: Remove udivdi3
riscv: delay: use do_div() instead of __udivdi3()
dt-bindings: Update the riscv,isa string description
RISC-V: Remove per cpu clocksource
Linus Torvalds [Sat, 10 Aug 2019 23:24:03 +0000 (16:24 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A few fixes for x86:
- Don't reset the carefully adjusted build flags for the purgatory
and remove the unwanted flags instead. The 'reset all' approach led
to build fails under certain circumstances.
- Unbreak CLANG build of the purgatory by avoiding the builtin
memcpy/memset implementations.
- Address missing prototype warnings by including the proper header
- Fix yet more fall-through issues"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/lib/cpu: Address missing prototypes warning
x86/purgatory: Use CFLAGS_REMOVE rather than reset KBUILD_CFLAGS
x86/purgatory: Do not use __builtin_memcpy and __builtin_memset
x86: mtrr: cyrix: Mark expected switch fall-through
x86/ptrace: Mark expected switch fall-through
Linus Torvalds [Sat, 10 Aug 2019 23:19:02 +0000 (16:19 -0700)]
Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf tooling fixes from Thomas Gleixner:
"Perf tooling fixes all over the place:
- Fix the selection of the main thread COMM in db-export
- Fix the disassemmbly display for BPF in annotate
- Fix cpumap mask setup in perf ftrace when only one CPU is present
- Add the missing 'cpu_clk_unhalted.core' event
- Fix CPU 0 bindings in NUMA benchmarks
- Fix the module size calculations for s390
- Handle the gap between kernel end and module start on s390
correctly
- Build and typo fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf pmu-events: Fix missing "cpu_clk_unhalted.core" event
perf annotate: Fix s390 gap between kernel end and module start
perf record: Fix module size on s390
perf tools: Fix include paths in ui directory
perf tools: Fix a typo in a variable name in the Documentation Makefile
perf cpumap: Fix writing to illegal memory in handling cpumap mask
perf ftrace: Fix failure to set cpumask when only one cpu is present
perf db-export: Fix thread__exec_comm()
perf annotate: Fix printing of unaugmented disassembled instructions from BPF
perf bench numa: Fix cpu0 binding
Linus Torvalds [Sat, 10 Aug 2019 22:48:02 +0000 (15:48 -0700)]
Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler fixes from Thomas Gleixner:
"Three fixlets for the scheduler:
- Avoid double bandwidth accounting in the push & pull code
- Use a sane FIFO priority for the Pressure Stall Information (PSI)
thread.
- Avoid permission checks when setting the scheduler params for the
PSI thread"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/psi: Do not require setsched permission from the trigger creator
sched/psi: Reduce psimon FIFO priority
sched/deadline: Fix double accounting of rq/running bw in push & pull
Linus Torvalds [Sat, 10 Aug 2019 22:46:25 +0000 (15:46 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A small fix for the affinity spreading code.
It failed to handle situations where a single vector was requested
either due to only one CPU being available or vector exhaustion
causing only a single interrupt to be granted.
The fix is to simply remove the requirement in the affinity spreading
code for more than one interrupt being available"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Create affinity mask for single vector
Linus Torvalds [Sat, 10 Aug 2019 22:44:09 +0000 (15:44 -0700)]
Merge branch 'core-urgent-for-linus' of git://git./linux/kernel/git/tip/tip
Pull objtool warning fix from Thomas Gleixner:
"The recent objtool fixes/enhancements unearthed a unbalanced CLAC in
the i915 driver.
Chris asked me to pick the fix up and route it through"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
drm/i915: Remove redundant user_access_end() from __copy_from_user() error path
Linus Torvalds [Sat, 10 Aug 2019 22:41:15 +0000 (15:41 -0700)]
Merge tag 'gfs2-v5.3-rc3.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fix from Andreas Gruenbacher:
"Fix incorrect lseek / fiemap results"
* tag 'gfs2-v5.3-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: gfs2_walk_metadata fix
Joe Perches [Mon, 5 Aug 2019 22:11:15 +0000 (15:11 -0700)]
Makefile: Convert -Wimplicit-fallthrough=3 to just -Wimplicit-fallthrough for clang
A compilation -Wimplicit-fallthrough warning was enabled by commit
a035d552a93b ("Makefile: Globally enable fall-through warning")
Even though clang 10.0.0 does not currently support this warning without
a patch, clang currently does not support a value for this option.
Link: https://bugs.llvm.org/show_bug.cgi?id=39382
The gcc default for this warning is 3 so removing the =3 has no effect
for gcc and enables the warning for patched versions of clang.
Also remove the =3 from an existing use in a parisc Makefile:
arch/parisc/math-emu/Makefile
Signed-off-by: Joe Perches <joe@perches.com>
Reviewed-and-tested-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sat, 10 Aug 2019 19:24:20 +0000 (12:24 -0700)]
Merge tag 'char-misc-5.3-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes Greg KH:
"Here are some small char/misc driver fixes for 5.3-rc4.
Two of these are for the habanalabs driver for issues found when
running on a big-endian system (are they still alive?) The others are
tiny fixes reported by people, and a MAINTAINERS update about the
location of the fpga development tree.
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
coresight: Fix DEBUG_LOCKS_WARN_ON for uninitialized attribute
MAINTAINERS: Move linux-fpga tree to new location
nvmem: Use the same permissions for eeprom as for nvmem
habanalabs: fix host memory polling in BE architecture
habanalabs: fix F/W download in BE architecture
Linus Torvalds [Sat, 10 Aug 2019 19:20:02 +0000 (12:20 -0700)]
Merge tag 'driver-core-5.3-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two small fixes for some driver core issues that have been
reported. There is also a kernfs "fix" here, which was then reverted
because it was found to cause problems in linux-next.
The driver core fixes both resolve reported issues, one with gpioint
stuff that showed up in 5.3-rc1, and the other finally (and hopefully)
resolves a very long standing race when removing glue directories.
It's nice to get that issue finally resolved and the developers
involved should be applauded for the persistence it took to get this
patch finally accepted.
All of these have been in linux-next for a while with no reported
issues. Well, the one reported issue, hence the revert :)"
* tag 'driver-core-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Revert "kernfs: fix memleak in kernel_ops_readdir()"
kernfs: fix memleak in kernel_ops_readdir()
driver core: Fix use-after-free and double free on glue directory
driver core: platform: return -ENXIO for missing GpioInt
Linus Torvalds [Sat, 10 Aug 2019 19:17:12 +0000 (12:17 -0700)]
Merge tag 'tty-5.3-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty fix from Greg KH:
"Here is a single tty kgdb fix for 5.3-rc4.
It fixes an annoying log message that has caused kdb to become
useless. It's another fallout from commit
ddde3c18b700 ("vt: More
locking checks") which tries to enforce locking checks more strictly
in the tty layer, unfortunatly when kdb is stopped, there's no need
for locks :)
This patch has been linux-next for a while with no reported issues"
* tag 'tty-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
kgdboc: disable the console lock when in kgdb
Linus Torvalds [Sat, 10 Aug 2019 19:13:39 +0000 (12:13 -0700)]
Merge tag 'staging-5.3-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull staging / IIO driver fixes from Greg KH:
"Here are some small staging and IIO driver fixes for 5.3-rc4.
Nothing major, just resolutions for a number of small reported issues,
full details in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'staging-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: adc: gyroadc: fix uninitialized return code
docs: generic-counter.rst: fix broken references for ABI file
staging: android: ion: Bail out upon SIGKILL when allocating memory.
Staging: fbtft: Fix GPIO handling
staging: unisys: visornic: Update the description of 'poll_for_irq()'
staging: wilc1000: flush the workqueue before deinit the host
staging: gasket: apex: fix copy-paste typo
Staging: fbtft: Fix reset assertion when using gpio descriptor
Staging: fbtft: Fix probing of gpio descriptor
iio: imu: mpu6050: add missing available scan masks
iio: cros_ec_accel_legacy: Fix incorrect channel setting
IIO: Ingenic JZ47xx: Set clock divider on probe
iio: adc: max9611: Fix misuse of GENMASK macro
Linus Torvalds [Sat, 10 Aug 2019 18:59:57 +0000 (11:59 -0700)]
Merge tag 'usb-5.3-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 5.3-rc4.
The "biggest" one here is moving code from one file to another in
order to fix a long-standing race condition with the creation of sysfs
files for USB devices. Turns out that there are now userspace tools
out there that are hitting this long-known bug, so it's time to fix
them. Thankfully the tool-maker in this case fixed the issue :)
The other patches in here are all fixes for reported issues. Now that
syzbot knows how to fuzz USB drivers better, and is starting to now
fuzz the userspace facing side of them at the same time, there will be
more and more small fixes like these coming, which is a good thing.
All of these have been in linux-next with no reported issues"
* tag 'usb-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: setup authorized_default attributes using usb_bus_notify
usb: iowarrior: fix deadlock on disconnect
Revert "USB: rio500: simplify locking"
usb: usbfs: fix double-free of usb memory upon submiturb error
usb: yurex: Fix use-after-free in yurex_delete
usb: typec: tcpm: Ignore unsupported/unknown alternate mode requests
xhci: Fix NULL pointer dereference at endpoint zero reset.
usb: host: xhci-rcar: Fix timeout in xhci_suspend()
usb: typec: ucsi: ccg: Fix uninitilized symbol error
usb: typec: tcpm: remove tcpm dir if no children
usb: typec: tcpm: free log buf memory when remove debug file
usb: typec: tcpm: Add NULL check before dereferencing config
Linus Torvalds [Sat, 10 Aug 2019 17:21:25 +0000 (10:21 -0700)]
Merge tag 'pinctrl-v5.3-2' of git://git./linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Delay acquisition of regmaps in the Aspeed G5 driver.
- Make a symbol static to reduce compiler noise.
* tag 'pinctrl-v5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: aspeed: Make aspeed_pinmux_ips static
pinctrl: aspeed-g5: Delay acquisition of regmaps
Linus Torvalds [Sat, 10 Aug 2019 17:17:19 +0000 (10:17 -0700)]
Merge tag 'powerpc-5.3-4' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
"Just one fix, a revert of a commit that was meant to be a minor
improvement to some inline asm, but ended up having no real benefit
with GCC and broke booting 32-bit machines when using Clang.
Thanks to: Arnd Bergmann, Christophe Leroy, Nathan Chancellor, Nick
Desaulniers, Segher Boessenkool"
* tag 'powerpc-5.3-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
Revert "powerpc: slightly improve cache helpers"
Linus Torvalds [Sat, 10 Aug 2019 17:10:33 +0000 (10:10 -0700)]
Merge tag 'Wimplicit-fallthrough-5.3-rc4' of git://git./linux/kernel/git/gustavoars/linux
Pull fall-through fixes from Gustavo A. R. Silva:
"Mark more switch cases where we are expecting to fall through, fixing
fall-through warnings in arm, sparc64, mips, i386 and s390"
* tag 'Wimplicit-fallthrough-5.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
ARM: ep93xx: Mark expected switch fall-through
scsi: fas216: Mark expected switch fall-throughs
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
video: fbdev: omapfb_main: Mark expected switch fall-throughs
watchdog: riowd: Mark expected switch fall-through
s390/net: Mark expected switch fall-throughs
crypto: ux500/crypt: Mark expected switch fall-throughs
watchdog: wdt977: Mark expected switch fall-through
watchdog: scx200_wdt: Mark expected switch fall-through
watchdog: Mark expected switch fall-throughs
ARM: signal: Mark expected switch fall-through
mfd: omap-usb-host: Mark expected switch fall-throughs
mfd: db8500-prcmu: Mark expected switch fall-throughs
ARM: OMAP: dma: Mark expected switch fall-throughs
ARM: alignment: Mark expected switch fall-throughs
ARM: tegra: Mark expected switch fall-through
ARM/hw_breakpoint: Mark expected switch fall-throughs
Linus Torvalds [Sat, 10 Aug 2019 03:31:04 +0000 (20:31 -0700)]
Merge tag 'kbuild-fixes-v5.3-3' of git://git./linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- revive single target %.ko
- do not create built-in.a where it is unneeded
- do not create modules.order where it is unneeded
- show a warning if subdir-y/m is used to visit a module Makefile
* tag 'kbuild-fixes-v5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: show hint if subdir-y/m is used to visit module Makefile
kbuild: generate modules.order only in directories visited by obj-y/m
kbuild: fix false-positive need-builtin calculation
kbuild: revive single target %.ko
Gustavo A. R. Silva [Thu, 8 Aug 2019 02:34:48 +0000 (21:34 -0500)]
ARM: ep93xx: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: arm-ep93xx_defconfig arm):
arch/arm/mach-ep93xx/crunch.c: In function 'crunch_do':
arch/arm/mach-ep93xx/crunch.c:46:3: warning: this statement may
fall through [-Wimplicit-fallthrough=]
memset(crunch_state, 0, sizeof(*crunch_state));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-ep93xx/crunch.c:53:2: note: here
case THREAD_NOTIFY_EXIT:
^~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 6 Aug 2019 08:26:15 +0000 (03:26 -0500)]
scsi: fas216: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
Fix the following warnings (Building: rpc_defconfig arm):
drivers/scsi/arm/fas216.c: In function ‘fas216_disconnect_intr’:
drivers/scsi/arm/fas216.c:913:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (fas216_get_last_msg(info, info->scsi.msgin_fifo) == ABORT) {
^
drivers/scsi/arm/fas216.c:919:2: note: here
default: /* huh? */
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_kick’:
drivers/scsi/arm/fas216.c:1959:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_allocate_tag(info, SCpnt);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1960:2: note: here
case TYPE_OTHER:
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_busservice_intr’:
drivers/scsi/arm/fas216.c:1413:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1414:2: note: here
case STATE(STAT_STATUS, PHASE_SELSTEPS):/* Sel w/ steps -> Status */
^~~~
drivers/scsi/arm/fas216.c:1424:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
fas216_stoptransfer(info);
^~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:1425:2: note: here
case STATE(STAT_MESGIN, PHASE_COMMAND): /* Command -> Message In */
^~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_funcdone_intr’:
drivers/scsi/arm/fas216.c:1573:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((stat & STAT_BUSMASK) == STAT_MESGIN) {
^
drivers/scsi/arm/fas216.c:1579:2: note: here
default:
^~~~~~~
drivers/scsi/arm/fas216.c: In function ‘fas216_handlesync’:
drivers/scsi/arm/fas216.c:605:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
info->scsi.phase = PHASE_MSGOUT_EXPECT;
~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~
drivers/scsi/arm/fas216.c:607:2: note: here
case async:
^~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 5 Aug 2019 19:47:35 +0000 (14:47 -0500)]
pcmcia: db1xxx_ss: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: db1xxx_defconfig mips):
drivers/pcmcia/db1xxx_ss.c:257:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/pcmcia/db1xxx_ss.c:269:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Fri, 2 Aug 2019 19:10:29 +0000 (14:10 -0500)]
video: fbdev: omapfb_main: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: omap1_defconfig arm):
drivers/watchdog/wdt285.c:170:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/watchdog/ar7_wdt.c:237:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:449:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1549:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1547:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1545:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1543:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1540:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1538:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
drivers/video/fbdev/omap/omapfb_main.c:1535:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 30 Jul 2019 01:45:29 +0000 (20:45 -0500)]
watchdog: riowd: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: sparc64):
drivers/watchdog/riowd.c: In function ‘riowd_ioctl’:
drivers/watchdog/riowd.c:136:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
riowd_writereg(p, riowd_timeout, WDTO_INDEX);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/watchdog/riowd.c:139:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Tue, 30 Jul 2019 00:13:54 +0000 (19:13 -0500)]
s390/net: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings (Building: s390):
drivers/s390/net/ctcm_fsms.c: In function ‘ctcmpc_chx_attnbusy’:
drivers/s390/net/ctcm_fsms.c:1703:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->changed_side == 1) {
^
drivers/s390/net/ctcm_fsms.c:1707:2: note: here
case MPCG_STATE_XID0IOWAIX:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘ctc_mpc_alloc_channel’:
drivers/s390/net/ctcm_mpc.c:358:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (callback)
^
drivers/s390/net/ctcm_mpc.c:360:2: note: here
case MPCG_STATE_XID0IOWAIT:
^~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_action_timeout’:
drivers/s390/net/ctcm_mpc.c:1469:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((fsm_getstate(rch->fsm) == CH_XID0_PENDING) &&
^
drivers/s390/net/ctcm_mpc.c:1472:2: note: here
default:
^~~~~~~
drivers/s390/net/ctcm_mpc.c: In function ‘mpc_send_qllc_discontact’:
drivers/s390/net/ctcm_mpc.c:2087:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (grp->estconnfunc) {
^
drivers/s390/net/ctcm_mpc.c:2092:2: note: here
case MPCG_STATE_FLOWC:
^~~~
drivers/s390/net/qeth_l2_main.c: In function ‘qeth_l2_process_inbound_buffer’:
drivers/s390/net/qeth_l2_main.c:328:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (IS_OSN(card)) {
^
drivers/s390/net/qeth_l2_main.c:337:3: note: here
default:
^~~~~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 22:35:45 +0000 (17:35 -0500)]
crypto: ux500/crypt: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_save_device_context’:
drivers/crypto/ux500/cryp/cryp.c:316:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_4_r = readl_relaxed(&src_reg->key_4_r);
drivers/crypto/ux500/cryp/cryp.c:318:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
drivers/crypto/ux500/cryp/cryp.c:320:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_3_r = readl_relaxed(&src_reg->key_3_r);
drivers/crypto/ux500/cryp/cryp.c:322:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
drivers/crypto/ux500/cryp/cryp.c:324:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
ctx->key_2_r = readl_relaxed(&src_reg->key_2_r);
drivers/crypto/ux500/cryp/cryp.c:326:2: note: here
default:
^~~~~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
drivers/crypto/ux500/cryp/cryp.c: In function ‘cryp_restore_device_context’:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:363:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_4_r, ®->key_4_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:365:2: note: here
case CRYP_KEY_SIZE_192:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:367:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_3_r, ®->key_3_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:369:2: note: here
case CRYP_KEY_SIZE_128:
^~~~
In file included from ./include/linux/io.h:13:0,
from drivers/crypto/ux500/cryp/cryp_p.h:14,
from drivers/crypto/ux500/cryp/cryp.c:15:
./arch/arm/include/asm/io.h:92:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
#define __raw_writel __raw_writel
^
./arch/arm/include/asm/io.h:299:29: note: in expansion of macro ‘__raw_writel’
#define writel_relaxed(v,c) __raw_writel((__force u32) cpu_to_le32(v),c)
^~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:371:3: note: in expansion of macro ‘writel_relaxed’
writel_relaxed(ctx->key_2_r, ®->key_2_r);
^~~~~~~~~~~~~~
drivers/crypto/ux500/cryp/cryp.c:373:2: note: here
default:
^~~~~~~
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 22:30:57 +0000 (17:30 -0500)]
watchdog: wdt977: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: arm):
drivers/watchdog/wdt977.c: In function ‘wdt977_ioctl’:
LD [M] drivers/media/platform/vicodec/vicodec.o
drivers/watchdog/wdt977.c:400:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
wdt977_keepalive();
^~~~~~~~~~~~~~~~~~
drivers/watchdog/wdt977.c:403:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 20:03:49 +0000 (15:03 -0500)]
watchdog: scx200_wdt: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning (Building: i386):
drivers/watchdog/scx200_wdt.c: In function ‘scx200_wdt_ioctl’:
drivers/watchdog/scx200_wdt.c:188:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
scx200_wdt_ping();
^~~~~~~~~~~~~~~~~
drivers/watchdog/scx200_wdt.c:189:2: note: here
case WDIOC_GETTIMEOUT:
^~~~
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 15:08:05 +0000 (10:08 -0500)]
watchdog: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/watchdog/ar7_wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 237:3
drivers/watchdog/pcwd.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 653:3
drivers/watchdog/sb_wdog.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 204:3
drivers/watchdog/wdt.c: warning: this statement may fall
through [-Wimplicit-fallthrough=]: => 391:3
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Mon, 29 Jul 2019 00:11:11 +0000 (19:11 -0500)]
ARM: signal: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/kernel/signal.c: In function 'do_signal':
arch/arm/kernel/signal.c:598:12: warning: this statement may fall through [-Wimplicit-fallthrough=]
restart -= 2;
~~~~~~~~^~~~
arch/arm/kernel/signal.c:599:3: note: here
case -ERESTARTNOHAND:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:57:05 +0000 (18:57 -0500)]
mfd: omap-usb-host: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_resume':
drivers/mfd/omap-usb-host.c:303:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i])) {
^
drivers/mfd/omap-usb-host.c:313:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
drivers/mfd/omap-usb-host.c: In function 'usbhs_runtime_suspend':
drivers/mfd/omap-usb-host.c:345:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (!IS_ERR(omap->hsic480m_clk[i]))
^
drivers/mfd/omap-usb-host.c:349:3: note: here
case OMAP_EHCI_PORT_MODE_TLL:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:53:15 +0000 (18:53 -0500)]
mfd: db8500-prcmu: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
drivers/mfd/db8500-prcmu.c: In function 'dsiclk_rate':
drivers/mfd/db8500-prcmu.c:1592:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1593:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI_2:
^~~~
drivers/mfd/db8500-prcmu.c:1594:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
div *= 2;
~~~~^~~~
drivers/mfd/db8500-prcmu.c:1595:2: note: here
case PRCM_DSI_PLLOUT_SEL_PHI:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:19:41 +0000 (18:19 -0500)]
ARM: OMAP: dma: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_src_burst_mode':
arch/arm/plat-omap/dma.c:384:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:393:2: note: here
case OMAP_DMA_DATA_BURST_16:
^~~~
arch/arm/plat-omap/dma.c:394:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:402:2: note: here
default:
^~~~~~~
arch/arm/plat-omap/dma.c: In function 'omap_set_dma_dest_burst_mode':
arch/arm/plat-omap/dma.c:473:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (dma_omap2plus()) {
^
arch/arm/plat-omap/dma.c:481:2: note: here
default:
^~~~~~~
Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:17:18 +0000 (18:17 -0500)]
ARM: alignment: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/mm/alignment.c: In function 'thumb2arm':
arch/arm/mm/alignment.c:688:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((tinstr & (3 << 9)) == 0x0400) {
^
arch/arm/mm/alignment.c:700:2: note: here
default:
^~~~~~~
arch/arm/mm/alignment.c: In function 'do_alignment_t32_to_handler':
arch/arm/mm/alignment.c:753:15: warning: this statement may fall through [-Wimplicit-fallthrough=]
poffset->un = (tinst2 & 0xff) << 2;
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
arch/arm/mm/alignment.c:754:2: note: here
case 0xe940:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:10:21 +0000 (18:10 -0500)]
ARM: tegra: Mark expected switch fall-through
Mark switch cases where we are expecting to fall through.
This patch fixes the following warning:
arch/arm/mach-tegra/reset.c: In function 'tegra_cpu_reset_handler_enable':
arch/arm/mach-tegra/reset.c:72:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
tegra_cpu_reset_handler_set(reset_address);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/arm/mach-tegra/reset.c:74:2: note: here
case 0:
^~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Gustavo A. R. Silva [Sun, 28 Jul 2019 23:02:41 +0000 (18:02 -0500)]
ARM/hw_breakpoint: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.
This patch fixes the following warnings:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_arch_parse':
arch/arm/kernel/hw_breakpoint.c:609:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_2)
^
arch/arm/kernel/hw_breakpoint.c:611:2: note: here
case 3:
^~~~
arch/arm/kernel/hw_breakpoint.c:613:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (hw->ctrl.len == ARM_BREAKPOINT_LEN_1)
^
arch/arm/kernel/hw_breakpoint.c:615:2: note: here
default:
^~~~~~~
arch/arm/kernel/hw_breakpoint.c: In function 'arch_build_bp_info':
arch/arm/kernel/hw_breakpoint.c:544:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if ((hw->ctrl.type != ARM_BREAKPOINT_EXECUTE)
^
arch/arm/kernel/hw_breakpoint.c:547:2: note: here
default:
^~~~~~~
In file included from include/linux/kernel.h:11,
from include/linux/list.h:9,
from include/linux/preempt.h:11,
from include/linux/hardirq.h:5,
from arch/arm/kernel/hw_breakpoint.c:16:
arch/arm/kernel/hw_breakpoint.c: In function 'hw_breakpoint_pending':
include/linux/compiler.h:78:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
# define unlikely(x) __builtin_expect(!!(x), 0)
^~~~~~~~~~~~~~~~~~~~~~~~~~
include/asm-generic/bug.h:136:2: note: in expansion of macro 'unlikely'
unlikely(__ret_warn_on); \
^~~~~~~~
arch/arm/kernel/hw_breakpoint.c:863:3: note: in expansion of macro 'WARN'
WARN(1, "Asynchronous watchpoint exception taken. Debugging results may be unreliable\n");
^~~~
arch/arm/kernel/hw_breakpoint.c:864:2: note: here
case ARM_ENTRY_SYNC_WATCHPOINT:
^~~~
arch/arm/kernel/hw_breakpoint.c: In function 'core_has_os_save_restore':
arch/arm/kernel/hw_breakpoint.c:910:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
if (oslsr & ARM_OSLSR_OSLM0)
^
arch/arm/kernel/hw_breakpoint.c:912:2: note: here
default:
^~~~~~~
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Linus Torvalds [Fri, 9 Aug 2019 22:46:29 +0000 (15:46 -0700)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"Bugfixes (arm and x86) and cleanups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
selftests: kvm: Adding config fragments
KVM: selftests: Update gitignore file for latest changes
kvm: remove unnecessary PageReserved check
KVM: arm/arm64: vgic: Reevaluate level sensitive interrupts on enable
KVM: arm: Don't write junk to CP15 registers on reset
KVM: arm64: Don't write junk to sysregs on reset
KVM: arm/arm64: Sync ICH_VMCR_EL2 back when about to block
x86: kvm: remove useless calls to kvm_para_available
KVM: no need to check return value of debugfs_create functions
KVM: remove kvm_arch_has_vcpu_debugfs()
KVM: Fix leak vCPU's VMCS value into other pCPU
KVM: Check preempted_in_kernel for involuntary preemption
KVM: LAPIC: Don't need to wakeup vCPU twice afer timer fire
arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
KVM: arm64: Update kvm_arm_exception_class and esr_class_str for new EC
KVM: arm: vgic-v3: Mark expected switch fall-through
arm64: KVM: regmap: Fix unexpected switch fall-through
KVM: arm/arm64: Introduce kvm_pmu_vcpu_init() to setup PMU counter index
Linus Torvalds [Fri, 9 Aug 2019 22:31:19 +0000 (15:31 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- newer systems with Elan touchpads will be switched over to SMBus
- HP Spectre X360 will be using SMbus/RMI4
- checks for invalid USB descriptors in kbtab and iforce
- build fixes for applespi driver (misconfigs)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: iforce - add sanity checks
Input: applespi - use struct_size() helper
Input: kbtab - sanity check for endpoint type
Input: usbtouchscreen - initialize PM mutex before using it
Input: applespi - add dependency on LEDS_CLASS
Input: synaptics - enable RMI mode for HP Spectre X360
Input: elantech - annotate fall-through case in elantech_use_host_notify()
Input: elantech - enable SMBus on new (2018+) systems
Input: applespi - fix trivial typo in struct description
Input: applespi - select CRC16 module
Input: applespi - fix warnings detected by sparse
Dan Williams [Thu, 8 Aug 2019 21:43:49 +0000 (14:43 -0700)]
mm/memremap: Fix reuse of pgmap instances with internal references
Currently, attempts to shutdown and re-enable a device-dax instance
trigger:
Missing reference count teardown definition
WARNING: CPU: 37 PID: 1608 at mm/memremap.c:211 devm_memremap_pages+0x234/0x850
[..]
RIP: 0010:devm_memremap_pages+0x234/0x850
[..]
Call Trace:
dev_dax_probe+0x66/0x190 [device_dax]
really_probe+0xef/0x390
driver_probe_device+0xb4/0x100
device_driver_attach+0x4f/0x60
Given that the setup path initializes pgmap->ref, arrange for it to be
also torn down so devm_memremap_pages() is ready to be called again and
not be mistaken for the 3rd-party per-cpu-ref case.
Fixes:
24917f6b1041 ("memremap: provide an optional internal refcount in struct dev_pagemap")
Reported-by: Fan Du <fan.du@intel.com>
Tested-by: Vishal Verma <vishal.l.verma@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/156530042781.2068700.8733813683117819799.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>