net: mvneta: move rx_dropped and rx_errors in per-cpu stats

[ Upstream commit c35947b8ff8acca33134ee39c31708233765c31a ]

Move rx_dropped and rx_errors counters in mvneta_pcpu_stats in order to
avoid possible races updating statistics

Fixes: 562e2f467e71 ("net: mvneta: Improve the buffer allocation method for SWBM")
Fixes: dc35a10f68d3 ("net: mvneta: bm: add support for hardware buffer management")
Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: microchip: enable module autoprobe

[ Upstream commit f8c2afa66d5397b0b9293c4347dac6dabb327685 ]

This matches /sys/devices/.../spi1.0/modalias content.

Fixes: 9b2d9f05cddf ("net: dsa: microchip: add ksz9567 to ksz9477 driver")
Fixes: d9033ae95cf4 ("net: dsa: microchip: add KSZ8563 compatibility string")
Fixes: 8c29bebb1f8a ("net: dsa: microchip: add KSZ9893 switch support")
Fixes: 45316818371d ("net: dsa: add support for ksz9897 ethernet switch")
Fixes: b987e98e50ab ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: bcm_sf2: Only 7278 supports 2Gb/sec IMP port

[ Upstream commit de34d7084edd069dac5aa010cfe32bd8c4619fa6 ]

The 7445 switch clocking profiles do not allow us to run the IMP port at
2Gb/sec in a way that it is reliable and consistent. Make sure that the
setting is only applied to the 7278 family.

Fixes: 8f1880cbe8d0 ("net: dsa: bcm_sf2: Configure IMP port for 2Gb/sec")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: b53: Always use dev->vlan_enabled in b53_configure_vlan()

[ Upstream commit df373702bc0f8f2d83980ea441e71639fc1efcf8 ]

b53_configure_vlan() is called by the bcm_sf2 driver upon setup and
indirectly through resume as well. During the initial setup, we are
guaranteed that dev->vlan_enabled is false, so there is no change in
behavior, however during suspend, we may have enabled VLANs before, so we
do want to restore that setting.

Fixes: dad8d7c6452b ("net: dsa: b53: Properly account for VLAN filtering")
Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dpaa_eth: support all modes with rate adapting PHYs

[ Upstream commit 73a21fa817f0cc8022dc6226250a86bca727a56d ]

Stop removing modes that are not supported on the system interface
when the connected PHY is capable of rate adaptation. This addresses
an issue with the LS1046ARDB board 10G interface no longer working
with an 1G link partner after autonegotiation support was added
for the Aquantia PHY on board in

commit 09c4c57f7bc4 ("net: phy: aquantia: add support for auto-negotiation configuration")

Before this commit the values advertised by the PHY were not
influenced by the dpaa_eth driver removal of system-side unsupported
modes as the aqr_config_aneg() was basically a no-op. After this
commit, the modes removed by the dpaa_eth driver were no longer
advertised thus autonegotiation with 1G link partners failed.

Reported-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

devlink: report 0 after hitting end in region read

[ Upstream commit d5b90e99e1d51b7b5d2b74fbc4c2db236a510913 ]

commit fdd41ec21e15 ("devlink: Return right error code in case of errors
for region read") modified the region read code to report errors
properly in unexpected cases.

In the case where the start_offset and ret_offset match, it unilaterally
converted this into an error. This causes an issue for the "dump"
version of the command. In this case, the devlink region dump will
always report an invalid argument:

000000000000ffd0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
000000000000ffe0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
devlink answers: Invalid argument
000000000000fff0 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff

This occurs because the expected flow for the dump is to return 0 after
there is no further data.

The simplest fix would be to stop converting the error code to -EINVAL
if start_offset == ret_offset. However, avoid unnecessary work by
checking for when start_offset is larger than the region size and
returning 0 upfront.

Fixes: fdd41ec21e15 ("devlink: Return right error code in case of errors for region read")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding/alb: properly access headers in bond_alb_xmit()

[ Upstream commit 38f88c45404293bbc027b956def6c10cbd45c616 ]

syzbot managed to send an IPX packet through bond_alb_xmit()
and af_packet and triggered a use-after-free.

First, bond_alb_xmit() was using ipx_hdr() helper to reach
the IPX header, but ipx_hdr() was using the transport offset
instead of the network offset. In the particular syzbot
report transport offset was 0xFFFF

This patch removes ipx_hdr() since it was only (mis)used from bonding.

Then we need to make sure IPv4/IPv6/IPX headers are pulled
in skb->head before dereferencing anything.

BUG: KASAN: use-after-free in bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
Read of size 2 at addr ffff8801ce56dfff by task syz-executor.2/18108
 (if (ipx_hdr(skb)->ipx_checksum != IPX_NO_CHECKSUM) ...)

Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 [<ffffffff8441fc42>] __dump_stack lib/dump_stack.c:17 [inline]
 [<ffffffff8441fc42>] dump_stack+0x14d/0x20b lib/dump_stack.c:53
 [<ffffffff81a7dec4>] print_address_description+0x6f/0x20b mm/kasan/report.c:282
 [<ffffffff81a7e0ec>] kasan_report_error mm/kasan/report.c:380 [inline]
 [<ffffffff81a7e0ec>] kasan_report mm/kasan/report.c:438 [inline]
 [<ffffffff81a7e0ec>] kasan_report.cold+0x8c/0x2a0 mm/kasan/report.c:422
 [<ffffffff81a7dc4f>] __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:469
 [<ffffffff82c8c00a>] bond_alb_xmit+0x153a/0x1590 drivers/net/bonding/bond_alb.c:1452
 [<ffffffff82c60c74>] __bond_start_xmit drivers/net/bonding/bond_main.c:4199 [inline]
 [<ffffffff82c60c74>] bond_start_xmit+0x4f4/0x1570 drivers/net/bonding/bond_main.c:4224
 [<ffffffff83baa558>] __netdev_start_xmit include/linux/netdevice.h:4525 [inline]
 [<ffffffff83baa558>] netdev_start_xmit include/linux/netdevice.h:4539 [inline]
 [<ffffffff83baa558>] xmit_one net/core/dev.c:3611 [inline]
 [<ffffffff83baa558>] dev_hard_start_xmit+0x168/0x910 net/core/dev.c:3627
 [<ffffffff83bacf35>] __dev_queue_xmit+0x1f55/0x33b0 net/core/dev.c:4238
 [<ffffffff83bae3a8>] dev_queue_xmit+0x18/0x20 net/core/dev.c:4278
 [<ffffffff84339189>] packet_snd net/packet/af_packet.c:3226 [inline]
 [<ffffffff84339189>] packet_sendmsg+0x4919/0x70b0 net/packet/af_packet.c:3252
 [<ffffffff83b1ac0c>] sock_sendmsg_nosec net/socket.c:673 [inline]
 [<ffffffff83b1ac0c>] sock_sendmsg+0x12c/0x160 net/socket.c:684
 [<ffffffff83b1f5a2>] __sys_sendto+0x262/0x380 net/socket.c:1996
 [<ffffffff83b1f700>] SYSC_sendto net/socket.c:2008 [inline]
 [<ffffffff83b1f700>] SyS_sendto+0x40/0x60 net/socket.c:2004

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: sgtl5000: Fix VDDA and VDDIO comparison

commit e19ecbf105b236a6334fab64d8fd5437b12ee019 upstream.

Comparing the voltage of VDDA and VDDIO to determine whether or not to
enable VDDC manual override is insufficient. This is a problem in case
the VDDA is supplied from different regulator than VDDIO, while both
report the same voltage to the regulator framework. In that case where
VDDA and VDDIO is supplied by different regulators, the VDDC manual
override must not be applied.

Fixes: b6319b061ba2 ("ASoC: sgtl5000: Fix charge pump source assignment")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20191220164450.1395038-2-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

regulator: core: Add regulator_is_equal() helper

commit b059b7e0ec3208ff1e17cff6387d75a9fbab4e02 upstream.

Add regulator_is_equal() helper to compare whether two regulators are
the same. This is useful for checking whether two separate regulators
in a driver are actually the same supply.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Igor Opaniuk <igor.opaniuk@toradex.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Link: https://lore.kernel.org/r/20191220164450.1395038-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubifs: Fix memory leak from c->sup_node

commit ff90bdfb206e49c8b418811efbdd0c77380fa8c2 upstream.

The c->sup_node is allocated in function ubifs_read_sb_node but
is not freed. This will cause memory leak as below:

unreferenced object 0xbc9ce000 (size 4096):
  comm "mount", pid 500, jiffies 4294952946 (age 315.820s)
  hex dump (first 32 bytes):
    31 18 10 06 06 7b f1 11 02 00 00 00 00 00 00 00  1....{..........
    00 10 00 00 06 00 00 00 00 00 00 00 08 00 00 00  ................
  backtrace:
    [<d1c503cd>] ubifs_read_superblock+0x48/0xebc
    [<a20e14bd>] ubifs_mount+0x974/0x1420
    [<8589ecc3>] legacy_get_tree+0x2c/0x50
    [<5f1fb889>] vfs_get_tree+0x28/0xfc
    [<bbfc7939>] do_mount+0x4f8/0x748
    [<4151f538>] ksys_mount+0x78/0xa0
    [<d59910a9>] ret_fast_syscall+0x0/0x54
    [<1cc40005>] 0x7ea02790

Free it in ubifs_umount and in the error path of mount_ubifs.

Fixes: fd6150051bec ("ubifs: Store read superblock node")
Signed-off-by: Quanyang Wang <quanyang.wang@windriver.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: Fix an error pointer dereference in error handling code

commit 5d3805af279c93ef49a64701f35254676d709622 upstream.

If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer
and we try to kfree() it which results in an Oops.

This patch re-arranges the error handling so now it only frees things
which have been allocated successfully.

Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ubi: fastmap: Fix inverted logic in seen selfcheck

commit ef5aafb6e4e9942a28cd300bdcda21ce6cbaf045 upstream.

set_seen() sets the bit corresponding to the PEB number in the bitmap,
so when self_check_seen() wants to find PEBs that haven't been seen we
have to print the PEBs that have their bit cleared, not the ones which
have it set.

Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code")
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio_balloon: Fix memory leaks on errors in virtballoon_probe()

commit 1ad6f58ea9364b0a5d8ae06249653ac9304a8578 upstream.

We forget to put the inode and unmount the kernfs used for compaction.

Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-3-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-balloon: Fix memory leak when unloading while hinting is in progress

commit 6c22dc61c76b7e7d355f1697ba0ecf26d1334ba6 upstream.

When unloading the driver while hinting is in progress, we will not
release the free page blocks back to MM, resulting in a memory leak.

Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Liang Li <liang.z.li@intel.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-2-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: Return the correct number of bytes written to the file

commit 09a80f2aef06b7c86143f5c14efd3485e0d2c139 upstream.

We must allow for the fact that iov_iter_write() could have returned
a short write (e.g. if there was an ENOSPC issue).

Fixes: d890be159a71 "nfsd: Add I/O trace points in the NFSv4 write path"
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix jiffies/time_t mixup in LRU list

commit 9594497f2c78993cb66b696122f7c65528ace985 upstream.

The nfsd4_blocked_lock->nbl_time timestamp is recorded in jiffies,
but then compared to a CLOCK_REALTIME timestamp later on, which makes
no sense.

For consistency with the other timestamps, change this to use a time_t.

This is a change in behavior, which may cause regressions, but the
current code is not sensible. On a system with CONFIG_HZ=1000,
the 'time_after((unsigned long)nbl->nbl_time, (unsigned long)cutoff))'
check is false for roughly the first 18 days of uptime and then true
for the next 49 days.

Fixes: 7919d0a27f1e ("nfsd: add a LRU list for blocked locks")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfsd: fix delay timer on 32-bit architectures

commit 2561c92b12f4f4e386d453556685f75775c0938b upstream.

The nfsd4_cb_layout_done() function takes a 'time_t' value,
multiplied by NSEC_PER_SEC*2 to get a nanosecond value.

This works fine on 64-bit architectures, but on 32-bit, any
value over 1 second results in a signed integer overflow
with unexpected results.

Cast one input to a 64-bit type in order to produce the
same result that we have on 64-bit architectures, regarless
of the type of nfsd4_lease.

Fixes: 6b9b21073d3b ("nfsd: give up on CB_LAYOUTRECALLs after two lease periods")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/core: Fix ODP get user pages flow

commit d07de8bd1709a80a282963ad7b2535148678a9e4 upstream.

The nr_pages argument of get_user_pages_remote() should always be in terms
of the system page size, not the MR page size. Use PAGE_SIZE instead of
umem_odp->page_shift.

Fixes: 403cd12e2cf7 ("IB/umem: Add contiguous ODP support")
Link: https://lore.kernel.org/r/20191222124649.52300-3-leon@kernel.org
Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

IB/mlx5: Fix outstanding_pi index for GSI qps

commit b5671afe5e39ed71e94eae788bacdcceec69db09 upstream.

Commit b0ffeb537f3a ("IB/mlx5: Fix iteration overrun in GSI qps") changed
the way outstanding WRs are tracked for the GSI QP. But the fix did not
cover the case when a call to ib_post_send() fails and updates index to
track outstanding.

Since the prior commmit outstanding_pi should not be bounded otherwise the
loop generate_completions() will fail.

Fixes: b0ffeb537f3a ("IB/mlx5: Fix iteration overrun in GSI qps")
Link: https://lore.kernel.org/r/1576195889-23527-1-git-send-email-psajeepa@purestorage.com
Signed-off-by: Prabhath Sajeepa <psajeepa@purestorage.com>
Acked-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: tulip: Adjust indentation in {dmfe, uli526x}_init_module

commit fe06bf3d83ef0d92f35a24e03297172e92ce9ce3 upstream.

Clang warns:

../drivers/net/ethernet/dec/tulip/uli526x.c:1812:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        switch (mode) {
        ^
../drivers/net/ethernet/dec/tulip/uli526x.c:1809:2: note: previous
statement is here
        if (cr6set)
        ^
1 warning generated.

../drivers/net/ethernet/dec/tulip/dmfe.c:2217:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
        switch(mode) {
        ^
../drivers/net/ethernet/dec/tulip/dmfe.c:2214:2: note: previous
statement is here
        if (cr6set)
        ^
1 warning generated.

This warning occurs because there is a space before the tab on these
lines. Remove them so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

While we are here, adjust the default block in dmfe_init_module to have
a proper break between the label and assignment and add a space between
the switch and opening parentheses to avoid a checkpatch warning.

Fixes: e1c3e5014040 ("[PATCH] initialisation cleanup for ULI526x-net-driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/795
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: smc911x: Adjust indentation in smc911x_phy_configure

commit 5c61e223004b3b5c3f1dd25718e979bc17a3b12d upstream.

Clang warns:

../drivers/net/ethernet/smsc/smc911x.c:939:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         if (!lp->ctl_rfduplx)
         ^
../drivers/net/ethernet/smsc/smc911x.c:936:2: note: previous statement
is here
        if (lp->ctl_rspeed != 100)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 0a0c72c9118c ("[PATCH] RE: [PATCH 1/1] net driver: Add support for SMSC LAN911x line of ethernet chips")
Link: https://github.com/ClangBuiltLinux/linux/issues/796
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ppp: Adjust indentation into ppp_async_input

commit 08cbc75f96029d3092664213a844a5e25523aa35 upstream.

Clang warns:

../drivers/net/ppp/ppp_async.c:877:6: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                                ap->rpkt = skb;
                                ^
../drivers/net/ppp/ppp_async.c:875:5: note: previous statement is here
                                if (!skb)
                                ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. Clean up this entire block's indentation so that it is consistent
with the Linux kernel coding style and clang no longer warns.

Fixes: 6722e78c9005 ("[PPP]: handle misaligned accesses")
Link: https://github.com/ClangBuiltLinux/linux/issues/800
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

NFC: pn544: Adjust indentation in pn544_hci_check_presence

commit 5080832627b65e3772a35d1dced68c64e2b24442 upstream.

Clang warns

../drivers/nfc/pn544/pn544.c:696:4: warning: misleading indentation;
statement is not part of the previous 'if' [-Wmisleading-indentation]
                 return nfc_hci_send_cmd(hdev, NFC_HCI_RF_READER_A_GATE,
                 ^
../drivers/nfc/pn544/pn544.c:692:3: note: previous statement is here
                if (target->nfcid1_len != 4 && target->nfcid1_len != 7 &&
                ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: da052850b911 ("NFC: Add pn544 presence check for different targets")
Link: https://github.com/ClangBuiltLinux/linux/issues/814
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: msm: mdp4: Adjust indentation in mdp4_dsi_encoder_enable

commit 251e3cb1418ff3f5061ee31335e346e852b16573 upstream.

Clang warns:

../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:124:3: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         mdp4_crtc_set_config(encoder->crtc,
         ^
../drivers/gpu/drm/msm/disp/mdp4/mdp4_dsi_encoder.c:121:2: note:
previous statement is here
        if (mdp4_dsi_encoder->enabled)
        ^

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 776638e73a19 ("drm/msm/dsi: Add a mdp4 encoder for DSI")
Link: https://github.com/ClangBuiltLinux/linux/issues/792
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/44x: Adjust indentation in ibm4xx_denali_fixup_memsize

commit c3aae14e5d468d18dbb5d7c0c8c7e2968cc14aad upstream.

Clang warns:

../arch/powerpc/boot/4xx.c:231:3: warning: misleading indentation;
statement is not part of the previous 'else' [-Wmisleading-indentation]
        val = SDRAM0_READ(DDR0_42);
        ^
../arch/powerpc/boot/4xx.c:227:2: note: previous statement is here
        else
        ^

This is because there is a space at the beginning of this line; remove
it so that the indentation is consistent according to the Linux kernel
coding style and clang no longer warns.

Fixes: d23f5099297c ("[POWERPC] 4xx: Adds decoding of 440SPE memory size to boot wrapper library")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/780
Link: https://lore.kernel.org/r/20191209200338.12546-1-natechancellor@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext2: Adjust indentation in ext2_fill_super

commit d9e9866803f7b6c3fdd35d345e97fb0b2908bbbc upstream.

Clang warns:

../fs/ext2/super.c:1076:3: warning: misleading indentation; statement is
not part of the previous 'if' [-Wmisleading-indentation]
        sbi->s_groups_count = ((le32_to_cpu(es->s_blocks_count) -
        ^
../fs/ext2/super.c:1074:2: note: previous statement is here
        if (EXT2_BLOCKS_PER_GROUP(sb) == 0)
        ^
1 warning generated.

This warning occurs because there is a space before the tab on this
line. Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: 41f04d852e35 ("[PATCH] ext2: fix mounts at 16T")
Link: https://github.com/ClangBuiltLinux/linux/issues/827
Link: https://lore.kernel.org/r/20191218031930.31393-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

phy: qualcomm: Adjust indentation in read_poll_timeout

commit a89806c998ee123bb9c0f18526e55afd12c0c0ab upstream.

Clang warns:

../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:83:4: warning:
misleading indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
                 usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50);
                 ^
../drivers/phy/qualcomm/phy-qcom-apq8064-sata.c:80:3: note: previous
statement is here
                if (readl_relaxed(addr) & mask)
                ^
1 warning generated.

This warning occurs because there is a space after the tab on this line.
Remove it so that the indentation is consistent with the Linux kernel
coding style and clang no longer warns.

Fixes: 1de990d8a169 ("phy: qcom: Add driver for QCOM APQ8064 SATA PHY")
Link: https://github.com/ClangBuiltLinux/linux/issues/816
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: spi-nor: Split mt25qu512a (n25q512a) entry into two

commit bd8a6e31b87b39a03ab11820776363640440dbe0 upstream.

mt25q family is different from n25q family of devices, even though manf
ID and device IDs are same. mt25q flash has bit 6 set in 5th byte of
READ ID response which can be used to distinguish it from n25q variant.
mt25q flashes support stateless 4 Byte addressing opcodes where as n25q
flashes don't. Therefore, have two separate entries for mt25qu512a and
n25q512a.

Fixes: 9607af6f857f ("mtd: spi-nor: Rename "n25q512a" to "mt25qu512a (n25q512a)"")
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: ufs: Recheck bkops level if bkops is disabled

commit 24366c2afbb0539fb14eff330d4e3a5db5c0a3ef upstream.

bkops level should be rechecked upon receiving an exception.  Currently the
level is being cached and never updated.

Update bkops each time the level is checked.  Also do not use the cached
bkops level value if it is disabled and then enabled.

Fixes: afdfff59a0e0 (scsi: ufs: handle non spec compliant bkops behaviour by device)
Link: https://lore.kernel.org/r/1574751214-8321-2-git-send-email-cang@qti.qualcomm.com
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla4xxx: Adjust indentation in qla4xxx_mem_free

commit aa8679736a82386551eb9f3ea0e6ebe2c0e99104 upstream.

Clang warns:

../drivers/scsi/qla4xxx/ql4_os.c:4148:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         if (ha->fw_dump)
         ^
../drivers/scsi/qla4xxx/ql4_os.c:4144:2: note: previous statement is
here
        if (ha->queues)
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this
line.  Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: 068237c87c64 ("[SCSI] qla4xxx: Capture minidump for ISP82XX on firmware failure")
Link: https://github.com/ClangBuiltLinux/linux/issues/819
Link: https://lore.kernel.org/r/20191218015252.20890-1-natechancellor@gmail.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: csiostor: Adjust indentation in csio_device_reset

commit a808a04c861782e31fc30e342a619c144aaee14a upstream.

Clang warns:

../drivers/scsi/csiostor/csio_scsi.c:1386:3: warning: misleading
indentation; statement is not part of the previous 'if'
[-Wmisleading-indentation]
         csio_lnodes_exit(hw, 1);
         ^
../drivers/scsi/csiostor/csio_scsi.c:1382:2: note: previous statement is
here
        if (*buf != '1')
        ^
1 warning generated.

This warning occurs because there is a space after the tab on this
line.  Remove it so that the indentation is consistent with the Linux
kernel coding style and clang no longer warns.

Fixes: a3667aaed569 ("[SCSI] csiostor: Chelsio FCoE offload driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/818
Link: https://lore.kernel.org/r/20191218014726.8455-1-natechancellor@gmail.com
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: qla2xxx: Fix the endianness of the qla82xx_get_fw_size() return type

commit 3f5f7335e5e234e340b48ecb24c2aba98a61f934 upstream.

Since qla82xx_get_fw_size() returns a number in CPU-endian format, change
its return type from __le32 into u32. This patch does not change any
functionality.

Fixes: 9c2b297572bf ("[SCSI] qla2xxx: Support for loading Unified ROM Image (URI) format firmware file.")
Cc: Himanshu Madhani <hmadhani@marvell.com>
Cc: Quinn Tran <qutran@marvell.com>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: Roman Bolshakov <r.bolshakov@yadro.com>
Link: https://lore.kernel.org/r/20191219004905.39586-1-bvanassche@acm.org
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ASoC: meson: axg-fifo: fix fifo threshold setup

commit 864cee90d4bd870e5d5e5a0b1a6f055f4f951350 upstream.

On TODDR sm1, the fifo threshold register field is slightly different
compared to the other SoCs. This leads to the fifo A being flushed to
memory every 8kB. If the period is smaller than that, several periods
are pushed to memory and notified at once. This is not ideal.

Fix the register field update. With this, the fifos are flushed every
128B. We could still do better, like adapt the threshold depending on
the period size, but at least it consistent across the different
SoC/fifos

Fixes: 5ac825c3d85e ("ASoC: meson: axg-toddr: add sm1 support")
Reported-by: Alden DSouza <aldend@google.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20191218172420.1199117-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

percpu: Separate decrypted varaibles anytime encryption can be enabled

commit 264b0d2bee148073c117e7bbbde5be7125a53be1 upstream.

CONFIG_VIRTUALIZATION may not be enabled for memory encrypted guests.  If
disabled, decrypted per-CPU variables may end up sharing the same page
with variables that should be left encrypted.

Always separate per-CPU variables that should be decrypted into their own
page anytime memory encryption can be enabled in the guest rather than
rely on any other config option that may not be enabled.

Fixes: ac26963a1175 ("percpu: Introduce DEFINE_PER_CPU_DECRYPTED")
Cc: stable@vger.kernel.org # 4.15+
Signed-off-by: Erdem Aktas <erdemaktas@google.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

broken ping to ipv6 linklocal addresses on debian buster

commit 87fbfffcc89b92a4281b0aa53bd06af714087889 upstream.

I am seeing ping failures to IPv6 linklocal addresses with Debian
buster. Easiest example to reproduce is:

$ ping -c1 -w1 ff02::1%eth1
connect: Invalid argument

$ ping -c1 -w1 ff02::1%eth1
PING ff02::01%eth1(ff02::1%eth1) 56 data bytes
64 bytes from fe80::e0:f9ff:fe0c:37%eth1: icmp_seq=1 ttl=64 time=0.059 ms

git bisect traced the failure to
commit b9ef5513c99b ("smack: Check address length before reading address family")

Arguably ping is being stupid since the buster version is not setting
the address family properly (ping on stretch for example does):

$ strace -e connect ping6 -c1 -w1 ff02::1%eth1
connect(5, {sa_family=AF_UNSPEC,
sa_data="\4\1\0\0\0\0\377\2\0\0\0\0\0\0\0\0\0\0\0\0\0\1\3\0\0\0"}, 28)
= -1 EINVAL (Invalid argument)

but the command works fine on kernels prior to this commit, so this is
breakage which goes against the Linux paradigm of "don't break userspace"

Cc: stable@vger.kernel.org
Reported-by: David Ahern <dsahern@gmail.com>
Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 security/smack/smack_lsm.c | 41 +++++++++++++++++++----------------------
 security/smack/smack_lsm.c |   41 +++++++++++++++++++----------------------
 1 file changed, 19 insertions(+), 22 deletions(-)

fix up iter on short count in fuse_direct_io()

commit f658adeea45e430a24c7a157c3d5448925ac2038 upstream.

fuse_direct_io() can end up advancing the iterator by more than the amount
of data read or written.  This case is handled by the generic code if going
through ->direct_IO(), but not in the FOPEN_DIRECT_IO case.

Fix by reverting the extra bytes from the iterator in case of error or a
short count.

To test: install lxcfs, then the following testcase
  int fd = open("/var/lib/lxcfs/proc/uptime", O_RDONLY);
  sendfile(1, fd, NULL, 16777216);
  sendfile(1, fd, NULL, 16777216);
will spew WARN_ON() in iov_iter_pipe().

Reported-by: Peter Geis <pgwipeout@gmail.com>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: 3c3db095b68c ("fuse: use iov_iter based generic splice helpers")
Cc: <stable@vger.kernel.org> # v5.1
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-pci: check name when counting MSI-X vectors

commit 303090b513fd1ee45aa1536b71a3838dc054bc05 upstream.

VQs without a name specified are not valid; they are skipped in the
later loop that assigns MSI-X vectors to queues, but the per_vq_vectors
loop above that counts the required number of vectors previously still
counted any queue with a non-NULL callback as needing a vector.

Add a check to the per_vq_vectors loop so that vectors with no name are
not counted to make the two loops consistent.  This prevents
over-counting unnecessary vectors (e.g. for features which were not
negotiated with the device).

Cc: stable@vger.kernel.org
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Wang, Wei W <wei.w.wang@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

virtio-balloon: initialize all vq callbacks

commit 5790b53390e18fdd21e70776e46d058c05eda2f2 upstream.

Ensure that elements of the callbacks array that correspond to
unavailable features are set to NULL; previously, they would be left
uninitialized.

Since the corresponding names array elements were explicitly set to
NULL, the uninitialized callback pointers would not actually be
dereferenced; however, the uninitialized callbacks elements would still
be read in vp_find_vqs_msix() and used to calculate the number of MSI-X
vectors required.

Cc: stable@vger.kernel.org
Fixes: 86a559787e6f ("virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT")
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Daniel Verkamp <dverkamp@chromium.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/dm/mst: Ignore payload update failures

commit 58fe03d6dec908a1bec07eea7e94907af5c07eec upstream.

Disabling a display on MST can potentially happen after the entire MST
topology has been removed, which means that we can't communicate with
the topology at all in this scenario. Likewise, this also means that we
can't properly update payloads on the topology and as such, it's a good
idea to ignore payload update failures when disabling displays.
Currently, amdgpu makes the mistake of halting the payload update
process when any payload update failures occur, resulting in leaving
DC's local copies of the payload tables out of date.

This ends up causing problems with hotplugging MST topologies, and
causes modesets on the second hotplug to fail like so:

[drm] Failed to updateMST allocation table forpipe idx:1
------------[ cut here ]------------
WARNING: CPU: 5 PID: 1511 at
drivers/gpu/drm/amd/amdgpu/../display/dc/core/dc_link.c:2677
update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Modules linked in: cdc_ether usbnet fuse xt_conntrack nf_conntrack
nf_defrag_ipv6 libcrc32c nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4
nft_counter nft_compat nf_tables nfnetlink tun bridge stp llc sunrpc
vfat fat wmi_bmof uvcvideo snd_hda_codec_realtek snd_hda_codec_generic
snd_hda_codec_hdmi videobuf2_vmalloc snd_hda_intel videobuf2_memops
videobuf2_v4l2 snd_intel_dspcfg videobuf2_common crct10dif_pclmul
snd_hda_codec videodev crc32_pclmul snd_hwdep snd_hda_core
ghash_clmulni_intel snd_seq mc joydev pcspkr snd_seq_device snd_pcm
sp5100_tco k10temp i2c_piix4 snd_timer thinkpad_acpi ledtrig_audio snd
wmi soundcore video i2c_scmi acpi_cpufreq ip_tables amdgpu(O)
rtsx_pci_sdmmc amd_iommu_v2 gpu_sched mmc_core i2c_algo_bit ttm
drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm
crc32c_intel serio_raw hid_multitouch r8152 mii nvme r8169 nvme_core
rtsx_pci pinctrl_amd
CPU: 5 PID: 1511 Comm: gnome-shell Tainted: G           O      5.5.0-rc7Lyude-Test+ #4
Hardware name: LENOVO FA495SIT26/FA495SIT26, BIOS R12ET22W(0.22 ) 01/31/2019
RIP: 0010:update_mst_stream_alloc_table+0x11e/0x130 [amdgpu]
Code: 28 00 00 00 75 2b 48 8d 65 e0 5b 41 5c 41 5d 41 5e 5d c3 0f b6 06
49 89 1c 24 41 88 44 24 08 0f b6 46 01 41 88 44 24 09 eb 93 <0f> 0b e9
2f ff ff ff e8 a6 82 a3 c2 66 0f 1f 44 00 00 0f 1f 44 00
RSP: 0018:ffffac428127f5b0 EFLAGS: 00010202
RAX: 0000000000000002 RBX: ffff8d1e166eee80 RCX: 0000000000000000
RDX: ffffac428127f668 RSI: ffff8d1e166eee80 RDI: ffffac428127f610
RBP: ffffac428127f640 R08: ffffffffc03d94a8 R09: 0000000000000000
R10: ffff8d1e24b02000 R11: ffffac428127f5b0 R12: ffff8d1e1b83d000
R13: ffff8d1e1bea0b08 R14: 0000000000000002 R15: 0000000000000002
FS:  00007fab23ffcd80(0000) GS:ffff8d1e28b40000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f151f1711e8 CR3: 00000005997c0000 CR4: 00000000003406e0
Call Trace:
 ? mutex_lock+0xe/0x30
 dc_link_allocate_mst_payload+0x9a/0x210 [amdgpu]
 ? dm_read_reg_func+0x39/0xb0 [amdgpu]
 ? core_link_enable_stream+0x656/0x730 [amdgpu]
 core_link_enable_stream+0x656/0x730 [amdgpu]
 dce110_apply_ctx_to_hw+0x58e/0x5d0 [amdgpu]
 ? dcn10_verify_allow_pstate_change_high+0x1d/0x280 [amdgpu]
 ? dcn10_wait_for_mpcc_disconnect+0x3c/0x130 [amdgpu]
 dc_commit_state+0x292/0x770 [amdgpu]
 ? add_timer+0x101/0x1f0
 ? ttm_bo_put+0x1a1/0x2f0 [ttm]
 amdgpu_dm_atomic_commit_tail+0xb59/0x1ff0 [amdgpu]
 ? amdgpu_move_blit.constprop.0+0xb8/0x1f0 [amdgpu]
 ? amdgpu_bo_move+0x16d/0x2b0 [amdgpu]
 ? ttm_bo_handle_move_mem+0x118/0x570 [ttm]
 ? ttm_bo_validate+0x134/0x150 [ttm]
 ? dm_plane_helper_prepare_fb+0x1b9/0x2a0 [amdgpu]
 ? _cond_resched+0x15/0x30
 ? wait_for_completion_timeout+0x38/0x160
 ? _cond_resched+0x15/0x30
 ? wait_for_completion_interruptible+0x33/0x190
 commit_tail+0x94/0x130 [drm_kms_helper]
 drm_atomic_helper_commit+0x113/0x140 [drm_kms_helper]
 drm_atomic_helper_set_config+0x70/0xb0 [drm_kms_helper]
 drm_mode_setcrtc+0x194/0x6a0 [drm]
 ? _cond_resched+0x15/0x30
 ? mutex_lock+0xe/0x30
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 drm_ioctl_kernel+0xaa/0xf0 [drm]
 drm_ioctl+0x208/0x390 [drm]
 ? drm_mode_getcrtc+0x180/0x180 [drm]
 amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
 do_vfs_ioctl+0x458/0x6d0
 ksys_ioctl+0x5e/0x90
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x55/0x1b0
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fab2121f87b
Code: 0f 1e fa 48 8b 05 0d 96 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff
ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa b8 10 00 00 00 0f 05 <48> 3d 01
f0 ff ff 73 01 c3 48 8b 0d dd 95 2c 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd045f9068 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffd045f90a0 RCX: 00007fab2121f87b
RDX: 00007ffd045f90a0 RSI: 00000000c06864a2 RDI: 000000000000000b
RBP: 00007ffd045f90a0 R08: 0000000000000000 R09: 000055dbd2985d10
R10: 000055dbd2196280 R11: 0000000000000246 R12: 00000000c06864a2
R13: 000000000000000b R14: 0000000000000000 R15: 000055dbd2196280
---[ end trace 6ea888c24d2059cd ]---

Note as well, I have only been able to reproduce this on setups with 2
MST displays.

Changes since v1:
* Don't return false when part 1 or part 2 of updating the payloads
  fails, we don't want to abort at any step of the process even if
  things fail

Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: tegra: Mark fuse clock as critical

commit bf83b96f87ae2abb1e535306ea53608e8de5dfbb upstream.

For a little over a year, U-Boot on Tegra124 has configured the flow
controller to perform automatic RAM re-repair on off->on power
transitions of the CPU rail[1]. This is mandatory for correct operation
of Tegra124. However, RAM re-repair relies on certain clocks, which the
kernel must enable and leave running. The fuse clock is one of those
clocks. Mark this clock as critical so that LP1 power mode (system
suspend) operates correctly.

[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair

Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/mmu_gather: invalidate TLB correctly on batch allocation failure and flush

commit 0ed1325967ab5f7a4549a2641c6ebe115f76e228 upstream.

Architectures for which we have hardware walkers of Linux page table
should flush TLB on mmu gather batch allocation failures and batch flush.
Some architectures like POWER supports multiple translation modes (hash
and radix) and in the case of POWER only radix translation mode needs the
above TLBI.  This is because for hash translation mode kernel wants to
avoid this extra flush since there are no hardware walkers of linux page
table.  With radix translation, the hardware also walks linux page table
and with that, kernel needs to make sure to TLB invalidate page walk cache
before page table pages are freed.

More details in commit d86564a2f085 ("mm/tlb, x86/mm: Support invalidating
TLB caches for RCU_TABLE_FREE")

The changes to sparc are to make sure we keep the old behavior since we
are now removing HAVE_RCU_TABLE_NO_INVALIDATE.  The default value for
tlb_needs_table_invalidate is to always force an invalidate and sparc can
avoid the table invalidate.  Hence we define tlb_needs_table_invalidate to
false for sparc architecture.

Link: http://lkml.kernel.org/r/20200116064531.483522-3-aneesh.kumar@linux.ibm.com
Fixes: a46cc7a90fd8 ("powerpc/mm/radix: Improve TLB/PWC flushes")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc]
Cc: <stable@vger.kernel.org> [4.14+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: qcom: qcs404-evb: Set vdd_apc regulator in high power mode

commit eac8ce86cb90ba96cb4bcbf2549d7a8b6938aa30 upstream.

vdd_apc is the regulator that supplies the main CPU cluster.

At sudden CPU load changes, we have noticed invalid page faults on
addresses with all bits shifted, as well as on addresses with individual
bits flipped.

By putting the vdd_apc regulator in high power mode, the voltage drops
during sudden load changes will be less severe, and we have not been able
to reproduce the invalid page faults with the regulator in this mode.

Fixes: 8faea8edbb35 ("arm64: dts: qcom: qcs404-evb: add spmi regulators")
Cc: stable@vger.kernel.org
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20191014120920.12691-1-niklas.cassel@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/page_alloc.c: fix uninitialized memmaps on a partially populated last section

commit e822969cab48b786b64246aad1a3ba2a774f5d23 upstream.

Patch series "mm: fix max_pfn not falling on section boundary", v2.

Playing with different memory sizes for a x86-64 guest, I discovered that
some memmaps (highest section if max_mem does not fall on the section
boundary) are marked as being valid and online, but contain garbage.  We
have to properly initialize these memmaps.

Looking at /proc/kpageflags and friends, I found some more issues,
partially related to this.

This patch (of 3):

If max_pfn is not aligned to a section boundary, we can easily run into
BUGs.  This can e.g., be triggered on x86-64 under QEMU by specifying a
memory size that is not a multiple of 128MB (e.g., 4097MB, but also
4160MB).  I was told that on real HW, we can easily have this scenario
(esp., one of the main reasons sub-section hotadd of devmem was added).

The issue is, that we have a valid memmap (pfn_valid()) for the whole
section, and the whole section will be marked "online".
pfn_to_online_page() will succeed, but the memmap contains garbage.

E.g., doing a "./page-types -r -a 0x144001" when QEMU was started with "-m
4160M" - (see tools/vm/page-types.c):

[  200.476376] BUG: unable to handle page fault for address: fffffffffffffffe
[  200.477500] #PF: supervisor read access in kernel mode
[  200.478334] #PF: error_code(0x0000) - not-present page
[  200.479076] PGD 59614067 P4D 59614067 PUD 59616067 PMD 0
[  200.479557] Oops: 0000 [#4] SMP NOPTI
[  200.479875] CPU: 0 PID: 603 Comm: page-types Tainted: G      D W         5.5.0-rc1-next-20191209 #93
[  200.480646] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4
[  200.481648] RIP: 0010:stable_page_flags+0x4d/0x410
[  200.482061] Code: f3 ff 41 89 c0 48 b8 00 00 00 00 01 00 00 00 45 84 c0 0f 85 cd 02 00 00 48 8b 53 08 48 8b 2b 48f
[  200.483644] RSP: 0018:ffffb139401cbe60 EFLAGS: 00010202
[  200.484091] RAX: fffffffffffffffe RBX: fffffbeec5100040 RCX: 0000000000000000
[  200.484697] RDX: 0000000000000001 RSI: ffffffff9535c7cd RDI: 0000000000000246
[  200.485313] RBP: ffffffffffffffff R08: 0000000000000000 R09: 0000000000000000
[  200.485917] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000144001
[  200.486523] R13: 00007ffd6ba55f48 R14: 00007ffd6ba55f40 R15: ffffb139401cbf08
[  200.487130] FS:  00007f68df717580(0000) GS:ffff9ec77fa00000(0000) knlGS:0000000000000000
[  200.487804] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  200.488295] CR2: fffffffffffffffe CR3: 0000000135d48000 CR4: 00000000000006f0
[  200.488897] Call Trace:
[  200.489115]  kpageflags_read+0xe9/0x140
[  200.489447]  proc_reg_read+0x3c/0x60
[  200.489755]  vfs_read+0xc2/0x170
[  200.490037]  ksys_pread64+0x65/0xa0
[  200.490352]  do_syscall_64+0x5c/0xa0
[  200.490665]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

But it can be triggered much easier via "cat /proc/kpageflags > /dev/null"
after cold/hot plugging a DIMM to such a system:

[root@localhost ~]# cat /proc/kpageflags > /dev/null
[  111.517275] BUG: unable to handle page fault for address: fffffffffffffffe
[  111.517907] #PF: supervisor read access in kernel mode
[  111.518333] #PF: error_code(0x0000) - not-present page
[  111.518771] PGD a240e067 P4D a240e067 PUD a2410067 PMD 0

This patch fixes that by at least zero-ing out that memmap (so e.g.,
page_to_pfn() will not crash).  Commit 907ec5fca3dc ("mm: zero remaining
unavailable struct pages") tried to fix a similar issue, but forgot to
consider this special case.

After this patch, there are still problems to solve.  E.g., not all of
these pages falling into a memory hole will actually get initialized later
and set PageReserved - they are only zeroed out - but at least the
immediate crashes are gone.  A follow-up patch will take care of this.

Link: http://lkml.kernel.org/r/20191211163201.17179-2-david@redhat.com
Fixes: f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap")
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Pavel Tatashin <pasha.tatashin@oracle.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Sistare <steven.sistare@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Bob Picco <bob.picco@oracle.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: <stable@vger.kernel.org> [4.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ocfs2: fix oops when writing cloned file

commit 2d797e9ff95ecbcf0a83d657928ed20579444857 upstream.

Writing a cloned file triggers a kernel oops and the user-space command
process is also killed by the system.  The bug can be reproduced stably
via:

1) create a file under ocfs2 file system directory.

  journalctl -b > aa.txt

2) create a cloned file for this file.

  reflink aa.txt bb.txt

3) write the cloned file with dd command.

  dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc

The dd command is killed by the kernel, then you can see the oops message
via dmesg command.

[  463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028
[  463.875413] #PF: supervisor read access in kernel mode
[  463.875416] #PF: error_code(0x0000) - not-present page
[  463.875418] PGD 0 P4D 0
[  463.875425] Oops: 0000 [#1] SMP PTI
[  463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G           OE     5.3.16-2-default
[  463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
[  463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2]
[  463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28
[  463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202
[  463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0
[  463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000
[  463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000
[  463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000
[  463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048
[  463.875526] FS:  00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000
[  463.875529] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0
[  463.875546] Call Trace:
[  463.875596]  ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2]
[  463.875648]  ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2]
[  463.875672]  new_sync_write+0x12d/0x1d0
[  463.875688]  vfs_write+0xad/0x1a0
[  463.875697]  ksys_write+0xa1/0xe0
[  463.875710]  do_syscall_64+0x60/0x1f0
[  463.875743]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  463.875758] RIP: 0033:0x7f8f4482ed44
[  463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00
[  463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44
[  463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001
[  463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003
[  463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000
[  463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000

This regression problem was introduced by commit e74540b28556 ("ocfs2:
protect extent tree in ocfs2_prepare_inode_for_write()").

Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com
Fixes: e74540b28556 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()").
Signed-off-by: Gang He <ghe@suse.com>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: s390: do not clobber registers during guest reset/store status

commit 55680890ea78be0df5e1384989f1be835043c084 upstream.

The initial CPU reset clobbers the userspace fpc and the store status
ioctl clobbers the guest acrs + fpr.  As these calls are only done via
ioctl (and not via vcpu_run), no CPU context is loaded, so we can (and
must) act directly on the sync regs, not on the thread context.

Cc: stable@kernel.org
Fixes: e1788bb995be ("KVM: s390: handle floating point registers in the run ioctl not in vcpu_put/load")
Fixes: 31d8b8d41a7e ("KVM: s390: handle access registers in the run ioctl not in vcpu_put/load")
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Link: https://lore.kernel.org/r/20200131100205.74720-2-frankja@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Revert "KVM: X86: Fix fpu state crash in kvm guest"

commit 2620fe268e80d667a94553cd37a94ccaa2cb8c83 upstream.

Reload the current thread's FPU state, which contains the guest's FPU
state, to the CPU registers if necessary during vcpu_enter_guest().
TIF_NEED_FPU_LOAD can be set any time control is transferred out of KVM,
e.g. if I/O is triggered during a KVM call to get_user_pages() or if a
softirq occurs while KVM is scheduled in.

Moving the handling of TIF_NEED_FPU_LOAD from vcpu_enter_guest() to
kvm_arch_vcpu_load(), effectively kvm_sched_in(), papered over a bug
where kvm_put_guest_fpu() failed to account for TIF_NEED_FPU_LOAD.  The
easiest way to the kvm_put_guest_fpu() bug was to run with involuntary
preemption enable, thus handling TIF_NEED_FPU_LOAD during kvm_sched_in()
made the bug go away.  But, removing the handling in vcpu_enter_guest()
exposed KVM to the rare case of a softirq triggering kernel_fpu_begin()
between vcpu_load() and vcpu_enter_guest().

Now that kvm_{load,put}_guest_fpu() correctly handle TIF_NEED_FPU_LOAD,
revert the commit to both restore the vcpu_enter_guest() behavior and
eliminate the superfluous switch_fpu_return() in kvm_arch_vcpu_load().

Note, leaving the handling in kvm_arch_vcpu_load() isn't wrong per se,
but it is unnecessary, and most critically, makes it extremely difficult
to find bugs such as the kvm_put_guest_fpu() issue due to shrinking the
window where a softirq can corrupt state.

A sample trace triggered by warning if TIF_NEED_FPU_LOAD is set while
vcpu state is loaded:

 <IRQ>
  gcmaes_crypt_by_sg.constprop.12+0x26e/0x660
  ? 0xffffffffc024547d
  ? __qdisc_run+0x83/0x510
  ? __dev_queue_xmit+0x45e/0x990
  ? ip_finish_output2+0x1a8/0x570
  ? fib4_rule_action+0x61/0x70
  ? fib4_rule_action+0x70/0x70
  ? fib_rules_lookup+0x13f/0x1c0
  ? helper_rfc4106_decrypt+0x82/0xa0
  ? crypto_aead_decrypt+0x40/0x70
  ? crypto_aead_decrypt+0x40/0x70
  ? crypto_aead_decrypt+0x40/0x70
  ? esp_output_tail+0x8f4/0xa5a [esp4]
  ? skb_ext_add+0xd3/0x170
  ? xfrm_input+0x7a6/0x12c0
  ? xfrm4_rcv_encap+0xae/0xd0
  ? xfrm4_transport_finish+0x200/0x200
  ? udp_queue_rcv_one_skb+0x1ba/0x460
  ? udp_unicast_rcv_skb.isra.63+0x72/0x90
  ? __udp4_lib_rcv+0x51b/0xb00
  ? ip_protocol_deliver_rcu+0xd2/0x1c0
  ? ip_local_deliver_finish+0x44/0x50
  ? ip_local_deliver+0xe0/0xf0
  ? ip_protocol_deliver_rcu+0x1c0/0x1c0
  ? ip_rcv+0xbc/0xd0
  ? ip_rcv_finish_core.isra.19+0x380/0x380
  ? __netif_receive_skb_one_core+0x7e/0x90
  ? netif_receive_skb_internal+0x3d/0xb0
  ? napi_gro_receive+0xed/0x150
  ? 0xffffffffc0243c77
  ? net_rx_action+0x149/0x3b0
  ? __do_softirq+0xe4/0x2f8
  ? handle_irq_event_percpu+0x6a/0x80
  ? irq_exit+0xe6/0xf0
  ? do_IRQ+0x7f/0xd0
  ? common_interrupt+0xf/0xf
  </IRQ>
  ? irq_entries_start+0x20/0x660
  ? vmx_get_interrupt_shadow+0x2f0/0x710 [kvm_intel]
  ? kvm_set_msr_common+0xfc7/0x2380 [kvm]
  ? recalibrate_cpu_khz+0x10/0x10
  ? ktime_get+0x3a/0xa0
  ? kvm_arch_vcpu_ioctl_run+0x107/0x560 [kvm]
  ? kvm_init+0x6bf/0xd00 [kvm]
  ? __seccomp_filter+0x7a/0x680
  ? do_vfs_ioctl+0xa4/0x630
  ? security_file_ioctl+0x32/0x50
  ? ksys_ioctl+0x60/0x90
  ? __x64_sys_ioctl+0x16/0x20
  ? do_syscall_64+0x5f/0x1a0
  ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
---[ end trace 9564a1ccad733a90 ]---

This reverts commit e751732486eb3f159089a64d1901992b1357e7cc.

Fixes: e751732486eb3 ("KVM: X86: Fix fpu state crash in kvm guest")
Reported-by: Derek Yerger <derek@djy.llc>
Reported-by: kernel@najdan.com
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: Thomas Lambertz <mail@thomaslambertz.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Ensure guest's FPU state is loaded when accessing for emulation

commit a7baead7e312f5a05381d68585fb6dc68e19e90f upstream.

Lock the FPU regs and reload the current thread's FPU state, which holds
the guest's FPU state, to the CPU registers if necessary prior to
accessing guest FPU state as part of emulation.  kernel_fpu_begin() can
be called from softirq context, therefore KVM must ensure softirqs are
disabled (locking the FPU regs disables softirqs) when touching CPU FPU
state.

Note, for all intents and purposes this reverts commit 6ab0b9feb82a7
("x86,kvm: remove KVM emulator get_fpu / put_fpu"), but at the time it
was applied, removing get/put_fpu() was correct.  The re-introduction
of {get,put}_fpu() is necessitated by the deferring of FPU state load.

Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Handle TIF_NEED_FPU_LOAD in kvm_{load,put}_guest_fpu()

commit c9aef3b85f425d1f6635382ec210ee5a7ef55d7d upstream.

Handle TIF_NEED_FPU_LOAD similar to how fpu__copy() handles the flag
when duplicating FPU state to a new task struct.  TIF_NEED_FPU_LOAD can
be set any time control is transferred out of KVM, be it voluntarily,
e.g. if I/O is triggered during a KVM call to get_user_pages, or
involuntarily, e.g. if softirq runs after an IRQ occurs.  Therefore,
KVM must account for TIF_NEED_FPU_LOAD whenever it is (potentially)
accessing CPU FPU state.

Fixes: 5f409e20b7945 ("x86/fpu: Defer FPU state load until return to userspace")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Free wbinvd_dirty_mask if vCPU creation fails

commit 16be9ddea268ad841457a59109963fff8c9de38d upstream.

Free the vCPU's wbinvd_dirty_mask if vCPU creation fails after
kvm_arch_vcpu_init(), e.g. when installing the vCPU's file descriptor.
Do the freeing by calling kvm_arch_vcpu_free() instead of open coding
the freeing.  This adds a likely superfluous, but ultimately harmless,
call to kvmclock_reset(), which only clears vcpu->arch.pv_time_enabled.
Using kvm_arch_vcpu_free() allows for additional cleanup in the future.

Fixes: f5f48ee15c2ee ("KVM: VMX: Execute WBINVD to keep data consistency with assigned devices")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Don't let userspace set host-reserved cr4 bits

commit b11306b53b2540c6ba068c4deddb6a17d9f8d95b upstream.

Calculate the host-reserved cr4 bits at runtime based on the system's
capabilities (using logic similar to __do_cpuid_func()), and use the
dynamically generated mask for the reserved bit check in kvm_set_cr4()
instead using of the static CR4_RESERVED_BITS define.  This prevents
userspace from "enabling" features in cr4 that are not supported by the
system, e.g. by ignoring KVM_GET_SUPPORTED_CPUID and specifying a bogus
CPUID for the vCPU.

Allowing userspace to set unsupported bits in cr4 can lead to a variety
of undesirable behavior, e.g. failed VM-Enter, and in general increases
KVM's attack surface.  A crafty userspace can even abuse CR4.LA57 to
induce an unchecked #GP on a WRMSR.

On a platform without LA57 support:

  KVM_SET_CPUID2 // CPUID_7_0_ECX.LA57 = 1
  KVM_SET_SREGS  // CR4.LA57 = 1
  KVM_SET_MSRS   // KERNEL_GS_BASE = 0x0004000000000000
  KVM_RUN

leads to a #GP when writing KERNEL_GS_BASE into hardware:

  unchecked MSR access error: WRMSR to 0xc0000102 (tried to write 0x0004000000000000)
  at rIP: 0xffffffffa00f239a (vmx_prepare_switch_to_guest+0x10a/0x1d0 [kvm_intel])
  Call Trace:
   kvm_arch_vcpu_ioctl_run+0x671/0x1c70 [kvm]
   kvm_vcpu_ioctl+0x36b/0x5d0 [kvm]
   do_vfs_ioctl+0xa1/0x620
   ksys_ioctl+0x66/0x70
   __x64_sys_ioctl+0x16/0x20
   do_syscall_64+0x4c/0x170
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7fc08133bf47

Note, the above sequence fails VM-Enter due to invalid guest state.
Userspace can allow VM-Enter to succeed (after the WRMSR #GP) by adding
a KVM_SET_SREGS w/ CR4.LA57=0 after KVM_SET_MSRS, in which case KVM will
technically leak the host's KERNEL_GS_BASE into the guest.  But, as
KERNEL_GS_BASE is a userspace-defined value/address, the leak is largely
benign as a malicious userspace would simply be exposing its own data to
the guest, and attacking a benevolent userspace would require multiple
bugs in the userspace VMM.

Cc: stable@vger.kernel.org
Cc: Jun Nakajima <jun.nakajima@intel.com>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: VMX: Add non-canonical check on writes to RTIT address MSRs

commit fe6ed369fca98e99df55c932b85782a5687526b5 upstream.

Reject writes to RTIT address MSRs if the data being written is a
non-canonical address as the MSRs are subject to canonical checks, e.g.
KVM will trigger an unchecked #GP when loading the values to hardware
during pt_guest_enter().

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/KVM: Clean up host's steal time structure

commit a6bd811f1209fe1c64c9f6fd578101d6436c6b6e upstream.

Now that we are mapping kvm_steal_time from the guest directly we
don't need keep a copy of it in kvm_vcpu_arch.st. The same is true
for the stime field.

This is part of CVE-2019-3016.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm: Cache gfn to pfn translation

commit 917248144db5d7320655dbb41d3af0b8a0f3d589 upstream.

__kvm_map_gfn()'s call to gfn_to_pfn_memslot() is
* relatively expensive
* in certain cases (such as when done from atomic context) cannot be called

Stashing gfn-to-pfn mapping should help with both cases.

This is part of CVE-2019-3016.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed

commit b043138246a41064527cf019a3d51d9f015e9796 upstream.

There is a potential race in record_steal_time() between setting
host-local vcpu->arch.st.steal.preempted to zero (i.e. clearing
KVM_VCPU_PREEMPTED) and propagating this value to the guest with
kvm_write_guest_cached(). Between those two events the guest may
still see KVM_VCPU_PREEMPTED in its copy of kvm_steal_time, set
KVM_VCPU_FLUSH_TLB and assume that hypervisor will do the right
thing. Which it won't.

Instad of copying, we should map kvm_steal_time and that will
guarantee atomicity of accesses to @preempted.

This is part of CVE-2019-3016.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm: Introduce kvm_(un)map_gfn()

commit 1eff70a9abd46f175defafd29bc17ad456f398a7 upstream.

kvm_vcpu_(un)map operates on gfns from any current address space.
In certain cases we want to make sure we are not mapping SMRAM
and for that we can use kvm_(un)map_gfn() that we are introducing
in this patch.

This is part of CVE-2019-3016.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit

commit 8c6de56a42e0c657955e12b882a81ef07d1d073e upstream.

kvm_steal_time_set_preempted() may accidentally clear KVM_VCPU_FLUSH_TLB
bit if it is called more than once while VCPU is preempted.

This is part of CVE-2019-3016.

(This bug was also independently discovered by Jim Mattson
<jmattson@google.com>)

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Joao Martins <joao.m.martins@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

kvm/svm: PKU not currently supported

commit a47970ed74a535b1accb4bc73643fd5a93993c3e upstream.

Current SVM implementation does not have support for handling PKU. Guests
running on a host with future AMD cpus that support the feature will read
garbage from the PKRU register and will hit segmentation faults on boot as
memory is getting marked as protected that should not be. Ensure that cpuid
from SVM does not advertise the feature.

Signed-off-by: John Allen <john.allen@amd.com>
Cc: stable@vger.kernel.org
Fixes: 0556cbdc2fbc ("x86/pkeys: Don't check if PKRU is zero before writing it")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S PR: Free shared page if mmu initialization fails

commit cb10bf9194f4d2c5d830eddca861f7ca0fecdbb4 upstream.

Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().

Fixes: 96bc451a15329 ("KVM: PPC: Introduce shared page")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Uninit vCPU if vcore creation fails

commit 1a978d9d3e72ddfa40ac60d26301b154247ee0bc upstream.

Call kvm_vcpu_uninit() if vcore creation fails to avoid leaking any
resources allocated by kvm_vcpu_init(), i.e. the vcpu->run page.

Fixes: 371fefd6f2dc4 ("KVM: PPC: Allow book3s_hv guests to use SMT processor modes")
Cc: stable@vger.kernel.org
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Fix potential put_fpu() w/o load_fpu() on MPX platform

commit f958bd2314d117f8c29f4821401bc1925bc2e5ef upstream.

Unlike most state managed by XSAVE, MPX is initialized to zero on INIT.
Because INITs are usually recognized in the context of a VCPU_RUN call,
kvm_vcpu_reset() puts the guest's FPU so that the FPU state is resident
in memory, zeros the MPX state, and reloads FPU state to hardware.  But,
in the unlikely event that an INIT is recognized during
kvm_arch_vcpu_ioctl_get_mpstate() via kvm_apic_accept_events(),
kvm_vcpu_reset() will call kvm_put_guest_fpu() without a preceding
kvm_load_guest_fpu() and corrupt the guest's FPU state (and possibly
userspace's FPU state as well).

Given that MPX is being removed from the kernel[*], fix the bug with the
simple-but-ugly approach of loading the guest's FPU during
KVM_GET_MP_STATE.

[*] See commit f240652b6032b ("x86/mpx: Remove MPX APIs").

Fixes: f775b13eedee2 ("x86,kvm: move qemu/guest FPU switching out to vcpu_run")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect MSR-based index computations in fixed_msr_to_seg_unit() from Spectre-v1/L1TF attacks

commit 25a5edea71b7c154b6a0b8cec14c711cafa31d26 upstream.

This fixes a Spectre-v1/L1TF vulnerability in fixed_msr_to_seg_unit().
This function contains index computations based on the
(attacker-controlled) MSR number.

Fixes: de9aef5e1ad6 ("KVM: MTRR: introduce fixed_mtrr_segment table")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect x86_decode_insn from Spectre-v1/L1TF attacks

commit 3c9053a2cae7ba2ba73766a34cea41baa70f57f7 upstream.

This fixes a Spectre-v1/L1TF vulnerability in x86_decode_insn().
kvm_emulate_instruction() (an ancestor of x86_decode_insn()) is an exported
symbol, so KVM should treat it conservatively from a security perspective.

Fixes: 045a282ca415 ("KVM: emulator: implement fninit, fnstsw, fnstcw")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect MSR-based index computations from Spectre-v1/L1TF attacks in x86.c

commit 6ec4c5eee1750d5d17951c4e1960d953376a0dda upstream.

This fixes a Spectre-v1/L1TF vulnerability in set_msr_mce() and
get_msr_mce().
Both functions contain index computations based on the
(attacker-controlled) MSR number.

Fixes: 890ca9aefa78 ("KVM: Add MCE support")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks

commit 8c86405f606ca8508b8d9280680166ca26723695 upstream.

This fixes a Spectre-v1/L1TF vulnerability in ioapic_read_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.

Fixes: a2c118bfab8b ("KVM: Fix bounds checking in ioapic indirect register reads (CVE-2013-1798)")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect MSR-based index computations in pmu.h from Spectre-v1/L1TF attacks

commit 13c5183a4e643cc2b03a22d0e582c8e17bb7457d upstream.

This fixes a Spectre-v1/L1TF vulnerability in the get_gp_pmc() and
get_fixed_pmc() functions.
They both contain index computations based on the (attacker-controlled)
MSR number.

Fixes: 25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect ioapic_write_indirect() from Spectre-v1/L1TF attacks

commit 670564559ca35b439c8d8861fc399451ddf95137 upstream.

This fixes a Spectre-v1/L1TF vulnerability in ioapic_write_indirect().
This function contains index computations based on the
(attacker-controlled) IOREGSEL register.

This patch depends on patch
"KVM: x86: Protect ioapic_read_indirect() from Spectre-v1/L1TF attacks".

Fixes: 70f93dae32ac ("KVM: Use temporary variable to shorten lines.")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect kvm_hv_msr_[get|set]_crash_data() from Spectre-v1/L1TF attacks

commit 8618793750071d66028584a83ed0b4fa7eb4f607 upstream.

This fixes Spectre-v1/L1TF vulnerabilities in kvm_hv_msr_get_crash_data()
and kvm_hv_msr_set_crash_data().
These functions contain index computations that use the
(attacker-controlled) MSR number.

Fixes: e7d9513b60e8 ("kvm/x86: added hyper-v crash msrs into kvm hyperv context")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect kvm_lapic_reg_write() from Spectre-v1/L1TF attacks

commit 4bf79cb089f6b1c6c632492c0271054ce52ad766 upstream.

This fixes a Spectre-v1/L1TF vulnerability in kvm_lapic_reg_write().
This function contains index computations based on the
(attacker-controlled) MSR number.

Fixes: 0105d1a52640 ("KVM: x2apic interface to lapic")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect DR-based index computations from Spectre-v1/L1TF attacks

commit ea740059ecb37807ba47b84b33d1447435a8d868 upstream.

This fixes a Spectre-v1/L1TF vulnerability in __kvm_set_dr() and
kvm_get_dr().
Both kvm_get_dr() and kvm_set_dr() (a wrapper of __kvm_set_dr()) are
exported symbols so KVM should tream them conservatively from a security
perspective.

Fixes: 020df0794f57 ("KVM: move DR register access handling into generic code")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Protect pmu_intel.c from Spectre-v1/L1TF attacks

commit 66061740f1a487f4ed54fde75e724709f805da53 upstream.

This fixes Spectre-v1/L1TF vulnerabilities in intel_find_fixed_event()
and intel_rdpmc_ecx_to_pmc().
kvm_rdpmc() (ancestor of intel_find_fixed_event()) and
reprogram_fixed_counter() (ancestor of intel_rdpmc_ecx_to_pmc()) are
exported symbols so KVM should treat them conservatively from a security
perspective.

Fixes: 25462f7f5295 ("KVM: x86/vPMU: Define kvm_pmu_ops to support vPMU function dispatch")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Refactor prefix decoding to prevent Spectre-v1/L1TF attacks

commit 125ffc5e0a56a3eded608dc51e09d5ebf72cf652 upstream.

This fixes Spectre-v1/L1TF vulnerabilities in
vmx_read_guest_seg_selector(), vmx_read_guest_seg_base(),
vmx_read_guest_seg_limit() and vmx_read_guest_seg_ar().  When
invoked from emulation, these functions contain index computations
based on the (attacker-influenced) segment value.  Using constants
prevents the attack.

Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86: Refactor picdev_write() to prevent Spectre-v1/L1TF attacks

commit 14e32321f3606e4b0970200b6e5e47ee6f1e6410 upstream.

This fixes a Spectre-v1/L1TF vulnerability in picdev_write().
It replaces index computations based on the (attacked-controlled) port
number with constants through a minor refactoring.

Fixes: 85f455f7ddbe ("KVM: Add support for in-kernel PIC emulation")

Signed-off-by: Nick Finco <nifi@google.com>
Signed-off-by: Marios Pomonis <pomonis@google.com>
Reviewed-by: Andrew Honig <ahonig@google.com>
Cc: stable@vger.kernel.org
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

aio: prevent potential eventfd recursion on poll

commit 01d7a356872eec22ef34a33a5f9cfa917d145468 upstream.

If we have nested or circular eventfd wakeups, then we can deadlock if
we run them inline from our poll waitqueue wakeup handler. It's also
possible to have very long chains of notifications, to the extent where
we could risk blowing the stack.

Check the eventfd recursion count before calling eventfd_signal(). If
it's non-zero, then punt the signaling to async context. This is always
safe, as it takes us out-of-line in terms of stack and locking context.

Cc: stable@vger.kernel.org # 4.19+
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

eventfd: track eventfd_signal() recursion depth

commit b5e683d5cab8cd433b06ae178621f083cabd4f63 upstream.

eventfd use cases from aio and io_uring can deadlock due to circular
or resursive calling, when eventfd_signal() tries to grab the waitqueue
lock. On top of that, it's also possible to construct notification
chains that are deep enough that we could blow the stack.

Add a percpu counter that tracks the percpu recursion depth, warn if we
exceed it. The counter is also exposed so that users of eventfd_signal()
can do the right thing if it's non-zero in the context where it is
called.

Cc: stable@vger.kernel.org # 4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bcache: add readahead cache policy options via sysfs interface

commit 038ba8cc1bffc51250add4a9b9249d4331576d8f upstream.

In year 2007 high performance SSD was still expensive, in order to
save more space for real workload or meta data, the readahead I/Os
for non-meta data was bypassed and not cached on SSD.

In now days, SSD price drops a lot and people can find larger size
SSD with more comfortable price. It is unncessary to alway bypass
normal readahead I/Os to save SSD space for now.

This patch adds options for readahead data cache policies via sysfs
file /sys/block/bcache<N>/readahead_cache_policy, the options are,
- "all": cache all readahead data I/Os.
- "meta-only": only cache meta data, and bypass other regular I/Os.

If users want to make bcache continue to only cache readahead request
for metadata and bypass regular data readahead, please set "meta-only"
to this sysfs file. By default, bcache will back to cache all read-
ahead requests now.

Cc: stable@vger.kernel.org
Signed-off-by: Coly Li <colyli@suse.de>
Acked-by: Eric Wheeler <bcache@linux.ewheeler.net>
Cc: Michael Lyle <mlyle@lyle.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

watchdog: fix UAF in reboot notifier handling in watchdog core code

commit 69503e585192fdd84b240f18a0873d20e18a2e0a upstream.

After the commit 44ea39420fc9 ("drivers/watchdog: make use of
devm_register_reboot_notifier()") the struct notifier_block reboot_nb in
the struct watchdog_device is removed from the reboot notifiers chain at
the time watchdog's chardev is closed. But at least in i6300esb.c case
reboot_nb is embedded in the struct esb_dev which can be freed on its
device removal and before the chardev is closed, thus UAF at reboot:

[    7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28
ts# uname -r                            note the address ^^^
5.5.0-rc5-ae6088-wdog
ts# ./openwdog0 &
[1] 696
ts# opened /dev/watchdog0, sleeping 10s...
ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove
[  178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28
           esb_dev.watchdog_device.reboot_nb memory is freed here ^^^
ts# ...woken up
[  181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8
[  181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78
                                     attempt to use memory already freed ^^^
[  181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b
[  181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b
                freed memory is filled with a slub poison ^^^
[1]+  Done                    ./openwdog0
ts# reboot
[  229.921862] systemd-shutdown[1]: Rebooting.
[  229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0
[  229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b
[  229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL
[  229.957584] general protection fault: 0000 [#1] SMP
[  229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog
[  229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ...
[  229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0
[  229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246
[  229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3
[  229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac
[  229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3
[  229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000
[  229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa
...   slub_debug=FZP poison ^^^
[  229.989089] Call Trace:
[  229.990157]  blocking_notifier_call_chain+0x43/0x59
[  229.991401]  kernel_restart_prepare+0x14/0x30
[  229.992607]  kernel_restart+0x9/0x30
[  229.993800]  __do_sys_reboot+0x1d2/0x210
[  230.000149]  do_syscall_64+0x3d/0x130
[  230.001277]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  230.002639] RIP: 0033:0x7f5461bdd177
[  230.016402] Modules linked in: i6300esb
[  230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier()
is called when watchdog device is removed. This also makes handling of
the reboot notifier unified with the handling of the restart handler,
which is freed with unregister_restart_handler() in the same place.

Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()")
Cc: stable@vger.kernel.org # v4.15+
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xen/balloon: Support xend-based toolstack take two

commit eda4eabf86fd6806eaabc23fb90dd056fdac037b upstream.

Commit 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack")
tried to fix a regression with running on rather ancient Xen versions.
Unfortunately the fix was based on the assumption that xend would
just use another Xenstore node, but in reality only some downstream
versions of xend are doing that. The upstream xend does not write
that Xenstore node at all, so the problem must be fixed in another
way.

The easiest way to achieve that is to fall back to the behavior
before commit 96edd61dcf4436 ("xen/balloon: don't online new memory
initially") in case the static memory maximum can't be read.

This is achieved by setting static_max to the current number of
memory pages known by the system resulting in target_diff becoming
zero.

Fixes: 3aa6c19d2f38be ("xen/balloon: Support xend-based toolstack")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: <stable@vger.kernel.org> # 4.13
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tools/kvm_stat: Fix kvm_exit filter name

commit 5fcf3a55a62afb0760ccb6f391d62f20bce4a42f upstream.

The filter name is fixed to "exit_reason" for some kvm_exit events, no
matter what architect we have. Actually, the filter name ("exit_reason")
is only applicable to x86, meaning it's broken on other architects
including aarch64.

This fixes the issue by providing various kvm_exit filter names, depending
on architect we're on. Afterwards, the variable filter name is picked and
applied through ioctl(fd, SET_FILTER).

Reported-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: rc: ensure lirc is initialized before registering input device

commit 080d89f522e2baddb4fbbd1af4b67b5f92537ef8 upstream.

Once rc_open is called on the input device, lirc events can be delivered.
Ensure lirc is ready to do so else we might get this:

Registered IR keymap rc-hauppauge
rc rc0: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0
input: Hauppauge WinTV PVR-350 as
/devices/pci0000:00/0000:00:1e.0/0000:04:00.0/i2c-0/0-0018/rc/rc0/input9
BUG: kernel NULL pointer dereference, address: 0000000000000038
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 1 PID: 17 Comm: kworker/1:0 Not tainted 5.3.11-300.fc31.x86_64 #1
Hardware name:  /DG43NB, BIOS NBG4310H.86A.0096.2009.0903.1845 09/03/2009
Workqueue: events ir_work [ir_kbd_i2c]
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019
RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4
RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4
R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8
FS:  0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0
Call Trace:
ir_do_keydown+0x8e/0x2b0
rc_keydown+0x52/0xc0
ir_work+0xb8/0x130 [ir_kbd_i2c]
process_one_work+0x19d/0x340
worker_thread+0x50/0x3b0
kthread+0xfb/0x130
? process_one_work+0x340/0x340
? kthread_park+0x80/0x80
ret_from_fork+0x35/0x40
Modules linked in: rc_hauppauge tuner msp3400 saa7127 saa7115 ivtv(+)
tveeprom cx2341x v4l2_common videodev mc i2c_algo_bit ir_kbd_i2c
ip_tables firewire_ohci e1000e serio_raw firewire_core ata_generic
crc_itu_t pata_acpi pata_jmicron fuse
CR2: 0000000000000038
---[ end trace c67c2697a99fa74b ]---
RIP: 0010:ir_lirc_scancode_event+0x3d/0xb0
Code: a6 b4 07 00 00 49 81 c6 b8 07 00 00 55 53 e8 ba a7 9d ff 4c 89
e7 49 89 45 00 e8 5e 7a 25 00 49 8b 1e 48 89 c5 4c 39 f3 74 58 <8b> 43
38 8b 53 40 89 c1 2b 4b 3c 39 ca 72 41 21 d0 49 8b 7d 00 49
RSP: 0018:ffffaae2000b3d88 EFLAGS: 00010017
RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000019
RDX: 0000000000000001 RSI: 006e801b1f26ce6a RDI: ffff9e39797c37b4
RBP: 0000000000000002 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: ffff9e39797c37b4
R13: ffffaae2000b3db8 R14: ffff9e39797c37b8 R15: ffff9e39797c33d8
FS:  0000000000000000(0000) GS:ffff9e397b680000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 0000000035844000 CR4: 00000000000006e0
rc rc0: lirc_dev: driver ir_kbd_i2c registered at minor = 0, scancode
receiver, no transmitter
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 2 (Philips NTSC (FI1236,FM1236 and
compatibles))
ivtv0: Registered device video0 for encoder MPG (4096 kB)
ivtv0: Registered device video32 for encoder YUV (2048 kB)
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
ivtv0: Registered device video24 for encoder PCM (320 kB)
ivtv0: Registered device radio0 for encoder radio
ivtv0: Registered device video16 for decoder MPG (1024 kB)
ivtv0: Registered device vbi8 for decoder VBI (64 kB)
ivtv0: Registered device vbi16 for decoder VOUT
ivtv0: Registered device video48 for decoder YUV (1024 kB)

Cc: stable@vger.kernel.org
Tested-by: Nick French <nickfrench@gmail.com>
Reported-by: Nick French <nickfrench@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: iguanair: fix endpoint sanity check

commit 1b257870a78b0a9ce98fdfb052c58542022ffb5b upstream.

Make sure to use the current alternate setting, which need not be the
first one by index, when verifying the endpoint descriptors and
initialising the URBs.

Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.

Fixes: 26ff63137c45 ("[media] Add support for the IguanaWorks USB IR Transceiver")
Fixes: ab1cbdf159be ("media: iguanair: add sanity checks")
Cc: stable <stable@vger.kernel.org> # 3.6
Cc: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/rect: Avoid division by zero

commit 433480c1afd44f3e1e664b85063d98cefeefa0ed upstream.

Check for zero width/height destination rectangle in
drm_rect_clip_scaled() to avoid a division by zero.

Cc: stable@vger.kernel.org
Fixes: f96bdf564f3e ("drm/rect: Handle rounding errors in drm_rect_clip_scaled, v3.")
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Benjamin Gaignard <benjamin.gaignard@st.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Testcase: igt/kms_selftest/drm_rect_clip_scaled_div_by_zero
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191122175623.13565-2-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: atmel-hlcdc: prefer a lower pixel-clock than requested

commit 51a19d150b520f6cb42143f3bdffacd3c33d7ac5 upstream.

The intention was to only select a higher pixel-clock rate than the
requested, if a slight overclocking would result in a rate significantly
closer to the requested rate than if the conservative lower pixel-clock
rate is selected. The fixed patch has the logic the other way around and
actually prefers the higher frequency. Fix that.

Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Fixes: 9946a3a9dbed ("drm/atmel-hlcdc: allow selecting a higher pixel-clock than requested")
Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: <stable@vger.kernel.org> # v4.20+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-6-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: atmel-hlcdc: enable clock before configuring timing engine

commit 2c1fb9d86f6820abbfaa38a6836157c76ccb4e7b upstream.

Changing pixel clock source without having this clock source enabled
will block the timing engine and the next operations after (in this case
setting ATMEL_HLCDC_CFG(5) settings in atmel_hlcdc_crtc_mode_set_nofb()
will fail). It is recomended (although in datasheet this is not present)
to actually enabled pixel clock source before doing any changes on timing
enginge (only SAM9X60 datasheet specifies that the peripheral clock and
pixel clock must be enabled before using LCD controller).

Fixes: 1a396789f65a ("drm: add Atmel HLCDC Display Controller support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: <stable@vger.kernel.org> # v4.0+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-3-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm: atmel-hlcdc: use double rate for pixel clock only if supported

commit 07acf4bafe81dd37eff3fbcfbbdbc48084bc202b upstream.

Doubled system clock should be used as pixel cock source only if this
is supported. This is emphasized by the value of
atmel_hlcdc_crtc::dc::desc::fixed_clksrc.

Fixes: a6eca2abdd42 ("drm: atmel-hlcdc: add config option for clock selection")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://patchwork.freedesktop.org/patch/msgid/1576672109-22707-2-git-send-email-claudiu.beznea@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: fix O_SYNC write handling

commit 6e5e41e2dc4e4413296d5a4af54ac92d7cd52317 upstream.

In gfs2_file_write_iter, for direct writes, the error checking in the buffered
write fallback case is incomplete.  This can cause inode write errors to go
undetected.  Fix and clean up gfs2_file_write_iter along the way.

Based on a proposed fix by Christoph Hellwig <hch@lst.de>.

Fixes: 967bcc91b044 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: move setting current->backing_dev_info

commit 4c0e8dda608a51855225c611b5c6b442f95fbc56 upstream.

Set current->backing_dev_info just around the buffered write calls to
prepare for the next fix.

Fixes: 967bcc91b044 ("gfs2: iomap direct I/O support")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: fix gfs2_find_jhead that returns uninitialized jhead with seq 0

commit 7582026f6f3588ecebd281965c8a71aff6fb6158 upstream.

When the first log header in a journal happens to have a sequence
number of 0, a bug in gfs2_find_jhead() causes it to prematurely exit,
and return an uninitialized jhead with seq 0. This can cause failures
in the caller. For instance, a mount fails in one test case.

The correct behavior is for it to continue searching through the journal
to find the correct journal head with the highest sequence number.

Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sunrpc: expiry_time should be seconds not timeval

commit 3d96208c30f84d6edf9ab4fac813306ac0d20c10 upstream.

When upcalling gssproxy, cache_head.expiry_time is set as a
timeval, not seconds since boot. As such, RPC cache expiry
logic will not clean expired objects created under
auth.rpcsec.context cache.

This has proven to cause kernel memory leaks on field. Using
64 bit variants of getboottime/timespec

Expiration times have worked this way since 2010's c5b29f885afe "sunrpc:
use seconds since boot in expiry cache".  The gssproxy code introduced
in 2012 added gss_proxy_save_rsc and introduced the bug.  That's a while
for this to lurk, but it required a bit of an extreme case to make it
obvious.

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 030d794bf498 "SUNRPC: Use gssproxy upcall for server..."
Tested-By: Frank Sorenson <sorenson@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mwifiex: fix unbalanced locking in mwifiex_process_country_ie()

commit 65b1aae0d9d5962faccc06bdb8e91a2a0b09451c upstream.

We called rcu_read_lock(), so we need to call rcu_read_unlock() before
we return.

Fixes: 3d94a4a8373b ("mwifiex: fix possible heap overflow in mwifiex_process_country_ie()")
Cc: stable@vger.kernel.org
Cc: huangwen <huangwenabc@gmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Acked-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iwlwifi: don't throw error when trying to remove IGTK

commit 197288d5ba8a5289f22d3aeb4fca3824bfd9b4af upstream.

The IGTK keys are only removed by mac80211 after it has already
removed the AP station.  This causes the driver to throw an error
because mac80211 is trying to remove the IGTK when the station doesn't
exist anymore.

The firmware is aware that the station has been removed and can deal
with it the next time we try to add an IGTK for a station, so we
shouldn't try to remove the key if the station ID is
IWL_MVM_INVALID_STA.  Do this by removing the check for mvm_sta before
calling iwl_mvm_send_sta_igtk() and check return from that function
gracefully if the station ID is invalid.

Cc: stable@vger.kernel.org # 4.12+
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: tegra: Enable PLLP bypass during Tegra124 LP1

commit 1a3388d506bf5b45bb283e6a4c4706cfb4897333 upstream.

For a little over a year, U-Boot has configured the flow controller to
perform automatic RAM re-repair on off->on power transitions of the CPU
rail[1]. This is mandatory for correct operation of Tegra124. However,
RAM re-repair relies on certain clocks, which the kernel must enable and
leave running. PLLP is one of those clocks. This clock is shut down
during LP1 in order to save power. Enable bypass (which I believe routes
osc_div_clk, essentially the crystal clock, to the PLL output) so that
this clock signal toggles even though the PLL is not active. This is
required so that LP1 power mode (system suspend) operates correctly.

The bypass configuration must then be undone when resuming from LP1, so
that all peripheral clocks run at the expected rate. Without this, many
peripherals won't work correctly; for example, the UART baud rate would
be incorrect.

NVIDIA's downstream kernel code only does this if not compiled for
Tegra30, so the added code is made conditional upon the chip ID.
NVIDIA's downstream code makes this change conditional upon the active
CPU cluster. The upstream kernel currently doesn't support cluster
switching, so this patch doesn't test the active CPU cluster ID.

[1] 3cc7942a4ae5 ARM: tegra: implement RAM repair

Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Cc: stable@vger.kernel.org
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: Correctly handle empty trees in find_first_clear_extent_bit

commit 5750c37523a2c8cbb450b9ef31e21c2ba876b05e upstream.

Raviu reported that running his regular fs_trim segfaulted with the
following backtrace:

[  237.525947] assertion failed: prev, in ../fs/btrfs/extent_io.c:1595
[  237.525984] ------------[ cut here ]------------
[  237.525985] kernel BUG at ../fs/btrfs/ctree.h:3117!
[  237.525992] invalid opcode: 0000 [#1] SMP PTI
[  237.525998] CPU: 4 PID: 4423 Comm: fstrim Tainted: G     U     OE     5.4.14-8-vanilla #1
[  237.526001] Hardware name: ASUSTeK COMPUTER INC.
[  237.526044] RIP: 0010:assfail.constprop.58+0x18/0x1a [btrfs]
[  237.526079] Call Trace:
[  237.526120]  find_first_clear_extent_bit+0x13d/0x150 [btrfs]
[  237.526148]  btrfs_trim_fs+0x211/0x3f0 [btrfs]
[  237.526184]  btrfs_ioctl_fitrim+0x103/0x170 [btrfs]
[  237.526219]  btrfs_ioctl+0x129a/0x2ed0 [btrfs]
[  237.526227]  ? filemap_map_pages+0x190/0x3d0
[  237.526232]  ? do_filp_open+0xaf/0x110
[  237.526238]  ? _copy_to_user+0x22/0x30
[  237.526242]  ? cp_new_stat+0x150/0x180
[  237.526247]  ? do_vfs_ioctl+0xa4/0x640
[  237.526278]  ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs]
[  237.526283]  do_vfs_ioctl+0xa4/0x640
[  237.526288]  ? __do_sys_newfstat+0x3c/0x60
[  237.526292]  ksys_ioctl+0x70/0x80
[  237.526297]  __x64_sys_ioctl+0x16/0x20
[  237.526303]  do_syscall_64+0x5a/0x1c0
[  237.526310]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

That was due to btrfs_fs_device::aloc_tree being empty. Initially I
thought this wasn't possible and as a percaution have put the assert in
find_first_clear_extent_bit. Turns out this is indeed possible and could
happen when a file system with SINGLE data/metadata profile has a 2nd
device added. Until balance is run or a new chunk is allocated on this
device it will be completely empty.

In this case find_first_clear_extent_bit should return the full range
[0, -1ULL] and let the caller handle this i.e for trim the end will be
capped at the size of actual device.

Link: https://lore.kernel.org/linux-btrfs/izW2WNyvy1dEDweBICizKnd2KDwDiDyY2EYQr4YCwk7pkuIpthx-JRn65MPBde00ND6V0_Lh8mW0kZwzDiLDv25pUYWxkskWNJnVP0kgdMA=@protonmail.com/
Fixes: 45bfcfc168f8 ("btrfs: Implement find_first_clear_extent_bit")
CC: stable@vger.kernel.org # 5.2+
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: flush write bio if we loop in extent_write_cache_pages

commit 42ffb0bf584ae5b6b38f72259af1e0ee417ac77f upstream.

There exists a deadlock with range_cyclic that has existed forever.  If
we loop around with a bio already built we could deadlock with a writer
who has the page locked that we're attempting to write but is waiting on
a page in our bio to be written out.  The task traces are as follows

  PID: 1329874  TASK: ffff889ebcdf3800  CPU: 33  COMMAND: "kworker/u113:5"
   #0 [ffffc900297bb658] __schedule at ffffffff81a4c33f
   #1 [ffffc900297bb6e0] schedule at ffffffff81a4c6e3
   #2 [ffffc900297bb6f8] io_schedule at ffffffff81a4ca42
   #3 [ffffc900297bb708] __lock_page at ffffffff811f145b
   #4 [ffffc900297bb798] __process_pages_contig at ffffffff814bc502
   #5 [ffffc900297bb8c8] lock_delalloc_pages at ffffffff814bc684
   #6 [ffffc900297bb900] find_lock_delalloc_range at ffffffff814be9ff
   #7 [ffffc900297bb9a0] writepage_delalloc at ffffffff814bebd0
   #8 [ffffc900297bba18] __extent_writepage at ffffffff814bfbf2
   #9 [ffffc900297bba98] extent_write_cache_pages at ffffffff814bffbd

  PID: 2167901  TASK: ffff889dc6a59c00  CPU: 14  COMMAND:
  "aio-dio-invalid"
   #0 [ffffc9003b50bb18] __schedule at ffffffff81a4c33f
   #1 [ffffc9003b50bba0] schedule at ffffffff81a4c6e3
   #2 [ffffc9003b50bbb8] io_schedule at ffffffff81a4ca42
   #3 [ffffc9003b50bbc8] wait_on_page_bit at ffffffff811f24d6
   #4 [ffffc9003b50bc60] prepare_pages at ffffffff814b05a7
   #5 [ffffc9003b50bcd8] btrfs_buffered_write at ffffffff814b1359
   #6 [ffffc9003b50bdb0] btrfs_file_write_iter at ffffffff814b5933
   #7 [ffffc9003b50be38] new_sync_write at ffffffff8128f6a8
   #8 [ffffc9003b50bec8] vfs_write at ffffffff81292b9d
   #9 [ffffc9003b50bf00] ksys_pwrite64 at ffffffff81293032

I used drgn to find the respective pages we were stuck on

page_entry.page 0xffffea00fbfc7500 index 8148 bit 15 pid 2167901
page_entry.page 0xffffea00f9bb7400 index 7680 bit 0 pid 1329874

As you can see the kworker is waiting for bit 0 (PG_locked) on index
7680, and aio-dio-invalid is waiting for bit 15 (PG_writeback) on index
8148.  aio-dio-invalid has 7680, and the kworker epd looks like the
following

  crash> struct extent_page_data ffffc900297bbbb0
  struct extent_page_data {
    bio = 0xffff889f747ed830,
    tree = 0xffff889eed6ba448,
    extent_locked = 0,
    sync_io = 0
  }

Probably worth mentioning as well that it waits for writeback of the
page to complete while holding a lock on it (at prepare_pages()).

Using drgn I walked the bio pages looking for page
0xffffea00fbfc7500 which is the one we're waiting for writeback on

  bio = Object(prog, 'struct bio', address=0xffff889f747ed830)
  for i in range(0, bio.bi_vcnt.value_()):
      bv = bio.bi_io_vec[i]
      if bv.bv_page.value_() == 0xffffea00fbfc7500:
  print("FOUND IT")

which validated what I suspected.

The fix for this is simple, flush the epd before we loop back around to
the beginning of the file during writeout.

Fixes: b293f02e1423 ("Btrfs: Add writepages support")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix race between adding and putting tree mod seq elements and nodes

commit 7227ff4de55d931bbdc156c8ef0ce4f100c78a5b upstream.

There is a race between adding and removing elements to the tree mod log
list and rbtree that can lead to use-after-free problems.

Consider the following example that explains how/why the problems happens:

1) Task A has mod log element with sequence number 200. It currently is
   the only element in the mod log list;

2) Task A calls btrfs_put_tree_mod_seq() because it no longer needs to
   access the tree mod log. When it enters the function, it initializes
   'min_seq' to (u64)-1. Then it acquires the lock 'tree_mod_seq_lock'
   before checking if there are other elements in the mod seq list.
   Since the list it empty, 'min_seq' remains set to (u64)-1. Then it
   unlocks the lock 'tree_mod_seq_lock';

3) Before task A acquires the lock 'tree_mod_log_lock', task B adds
   itself to the mod seq list through btrfs_get_tree_mod_seq() and gets a
   sequence number of 201;

4) Some other task, name it task C, modifies a btree and because there
   elements in the mod seq list, it adds a tree mod elem to the tree
   mod log rbtree. That node added to the mod log rbtree is assigned
   a sequence number of 202;

5) Task B, which is doing fiemap and resolving indirect back references,
   calls btrfs get_old_root(), with 'time_seq' == 201, which in turn
   calls tree_mod_log_search() - the search returns the mod log node
   from the rbtree with sequence number 202, created by task C;

6) Task A now acquires the lock 'tree_mod_log_lock', starts iterating
   the mod log rbtree and finds the node with sequence number 202. Since
   202 is less than the previously computed 'min_seq', (u64)-1, it
   removes the node and frees it;

7) Task B still has a pointer to the node with sequence number 202, and
   it dereferences the pointer itself and through the call to
   __tree_mod_log_rewind(), resulting in a use-after-free problem.

This issue can be triggered sporadically with the test case generic/561
from fstests, and it happens more frequently with a higher number of
duperemove processes. When it happens to me, it either freezes the VM or
it produces a trace like the following before crashing:

  [ 1245.321140] general protection fault: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI
  [ 1245.321200] CPU: 1 PID: 26997 Comm: pool Not tainted 5.5.0-rc6-btrfs-next-52 #1
  [ 1245.321235] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
  [ 1245.321287] RIP: 0010:rb_next+0x16/0x50
  [ 1245.321307] Code: ....
  [ 1245.321372] RSP: 0018:ffffa151c4d039b0 EFLAGS: 00010202
  [ 1245.321388] RAX: 6b6b6b6b6b6b6b6b RBX: ffff8ae221363c80 RCX: 6b6b6b6b6b6b6b6b
  [ 1245.321409] RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8ae221363c80
  [ 1245.321439] RBP: ffff8ae20fcc4688 R08: 0000000000000002 R09: 0000000000000000
  [ 1245.321475] R10: ffff8ae20b120910 R11: 00000000243f8bb1 R12: 0000000000000038
  [ 1245.321506] R13: ffff8ae221363c80 R14: 000000000000075f R15: ffff8ae223f762b8
  [ 1245.321539] FS:  00007fdee1ec7700(0000) GS:ffff8ae236c80000(0000) knlGS:0000000000000000
  [ 1245.321591] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  [ 1245.321614] CR2: 00007fded4030c48 CR3: 000000021da16003 CR4: 00000000003606e0
  [ 1245.321642] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  [ 1245.321668] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  [ 1245.321706] Call Trace:
  [ 1245.321798]  __tree_mod_log_rewind+0xbf/0x280 [btrfs]
  [ 1245.321841]  btrfs_search_old_slot+0x105/0xd00 [btrfs]
  [ 1245.321877]  resolve_indirect_refs+0x1eb/0xc60 [btrfs]
  [ 1245.321912]  find_parent_nodes+0x3dc/0x11b0 [btrfs]
  [ 1245.321947]  btrfs_check_shared+0x115/0x1c0 [btrfs]
  [ 1245.321980]  ? extent_fiemap+0x59d/0x6d0 [btrfs]
  [ 1245.322029]  extent_fiemap+0x59d/0x6d0 [btrfs]
  [ 1245.322066]  do_vfs_ioctl+0x45a/0x750
  [ 1245.322081]  ksys_ioctl+0x70/0x80
  [ 1245.322092]  ? trace_hardirqs_off_thunk+0x1a/0x1c
  [ 1245.322113]  __x64_sys_ioctl+0x16/0x20
  [ 1245.322126]  do_syscall_64+0x5c/0x280
  [ 1245.322139]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
  [ 1245.322155] RIP: 0033:0x7fdee3942dd7
  [ 1245.322177] Code: ....
  [ 1245.322258] RSP: 002b:00007fdee1ec6c88 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
  [ 1245.322294] RAX: ffffffffffffffda RBX: 00007fded40210d8 RCX: 00007fdee3942dd7
  [ 1245.322314] RDX: 00007fded40210d8 RSI: 00000000c020660b RDI: 0000000000000004
  [ 1245.322337] RBP: 0000562aa89e7510 R08: 0000000000000000 R09: 00007fdee1ec6d44
  [ 1245.322369] R10: 0000000000000073 R11: 0000000000000246 R12: 00007fdee1ec6d48
  [ 1245.322390] R13: 00007fdee1ec6d40 R14: 00007fded40210d0 R15: 00007fdee1ec6d50
  [ 1245.322423] Modules linked in: ....
  [ 1245.323443] ---[ end trace 01de1e9ec5dff3cd ]---

Fix this by ensuring that btrfs_put_tree_mod_seq() computes the minimum
sequence number and iterates the rbtree while holding the lock
'tree_mod_log_lock' in write mode. Also get rid of the 'tree_mod_seq_lock'
lock, since it is now redundant.

Fixes: bd989ba359f2ac ("Btrfs: add tree modification log functions")
Fixes: 097b8a7c9e48e2 ("Btrfs: join tree mod log code with the code holding back delayed refs")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: drop log root for dropped roots

commit 889bfa39086e86b52fcfaa04d72c95eaeb12f9a5 upstream.

If we fsync on a subvolume and create a log root for that volume, and
then later delete that subvolume we'll never clean up its log root.  Fix
this by making switch_commit_roots free the log for any dropped roots we
encounter.  The extra churn is because we need a btrfs_trans_handle, not
the btrfs_transaction.

CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: set trans->drity in btrfs_commit_transaction

commit d62b23c94952e78211a383b7d90ef0afbd9a3717 upstream.

If we abort a transaction we have the following sequence

if (!trans->dirty && list_empty(&trans->new_bgs))
return;
WRITE_ONCE(trans->transaction->aborted, err);

The idea being if we didn't modify anything with our trans handle then
we don't really need to abort the whole transaction, maybe the other
trans handles are fine and we can carry on.

However in the case of create_snapshot we add a pending_snapshot object
to our transaction and then commit the transaction.  We don't actually
modify anything.  sync() behaves the same way, attach to an existing
transaction and commit it.  This means that if we have an IO error in
the right places we could abort the committing transaction with our
trans->dirty being not set and thus not set transaction->aborted.

This is a problem because in the create_snapshot() case we depend on
pending->error being set to something, or btrfs_commit_transaction
returning an error.

If we are not the trans handle that gets to commit the transaction, and
we're waiting on the commit to happen we get our return value from
cur_trans->aborted.  If this was not set to anything because sync() hit
an error in the transaction commit before it could modify anything then
cur_trans->aborted would be 0.  Thus we'd return 0 from
btrfs_commit_transaction() in create_snapshot.

This is a problem because we then try to do things with
pending_snapshot->snap, which will be NULL because we didn't create the
snapshot, and then we'll get a NULL pointer dereference like the
following

"BUG: kernel NULL pointer dereference, address: 00000000000001f0"
RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330
Call Trace:
 ? btrfs_mksubvol.isra.31+0x3f2/0x510
 btrfs_mksubvol.isra.31+0x4bc/0x510
 ? __sb_start_write+0xfa/0x200
 ? mnt_want_write_file+0x24/0x50
 btrfs_ioctl_snap_create_transid+0x16c/0x1a0
 btrfs_ioctl_snap_create_v2+0x11e/0x1a0
 btrfs_ioctl+0x1534/0x2c10
 ? free_debug_processing+0x262/0x2a3
 do_vfs_ioctl+0xa6/0x6b0
 ? do_sys_open+0x188/0x220
 ? syscall_trace_enter+0x1f8/0x330
 ksys_ioctl+0x60/0x90
 __x64_sys_ioctl+0x16/0x20
 do_syscall_64+0x4a/0x1b0

In order to fix this we need to make sure anybody who calls
commit_transaction has trans->dirty set so that they properly set the
trans->transaction->aborted value properly so any waiters know bad
things happened.

This was found while I was running generic/475 with my modified
fsstress, it reproduced within a few runs.  I ran with this patch all
night and didn't see the problem again.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix infinite loop during fsync after rename operations

commit b5e4ff9d465da1233a2d9a47ebce487c70d8f4ab upstream.

Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.

The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.

Consider the following example:

  $ mkfs.btrfs -f /dev/sdb
  $ mount /dev/sdb /mnt

  $ mkdir /mnt/testdir                           # inode 257

  $ touch /mnt/testdir/zz                        # inode 258
  $ ln /mnt/testdir/zz /mnt/testdir/zz_link

  $ touch /mnt/testdir/a                         # inode 259

  $ sync

  # The following 3 renames achieve the same result as a rename exchange
  # operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).

  $ mv /mnt/testdir/a /mnt/testdir/a/tmp
  $ mv /mnt/testdir/zz_link /mnt/testdir/a
  $ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link

  # The following rename and file creation give the same result as a
  # rename whiteout operation (<rename_whiteout> zz to a2).

  $ mv /mnt/testdir/zz /mnt/testdir/a2
  $ touch /mnt/testdir/zz                        # inode 260

  $ xfs_io -c fsync /mnt/testdir/zz
    --> results in the infinite loop

The following steps happen:

1) When logging inode 260, we find that its reference named "zz" was
   used by inode 258 in the previous transaction (through the commit
   root), so inode 258 is added to the list of conflicting indoes that
   need to be logged;

2) After logging inode 258, we find that its reference named "a" was
   used by inode 259 in the previous transaction, and therefore we add
   inode 259 to the list of conflicting inodes to be logged;

3) After logging inode 259, we find that its reference named "zz_link"
   was used by inode 258 in the previous transaction - we add inode 258
   to the list of conflicting inodes to log, again - we had already
   logged it before at step 3. After logging it again, we find again
   that inode 259 conflicts with him, and we add again 259 to the list,
   etc - we end up repeating all the previous steps.

So fix this by skipping logging of conflicting inodes that were already
logged.

Fixes: 6b5fc433a7ad67 ("Btrfs: fix fsync after succession of renames of different files")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: make deduplication with range including the last block work

commit 831d2fa25ab8e27592b1b0268dae6f2dfaf7cc43 upstream.

Since btrfs was migrated to use the generic VFS helpers for clone and
deduplication, it stopped allowing for the last block of a file to be
deduplicated when the source file size is not sector size aligned (when
eof is somewhere in the middle of the last block). There are two reasons
for that:

1) The generic code always rounds down, to a multiple of the block size,
   the range's length for deduplications. This means we end up never
   deduplicating the last block when the eof is not block size aligned,
   even for the safe case where the destination range's end offset matches
   the destination file's size. That rounding down operation is done at
   generic_remap_check_len();

2) Because of that, the btrfs specific code does not expect anymore any
   non-aligned range length's for deduplication and therefore does not
   work if such nona-aligned length is given.

This patch addresses that second part, and it depends on a patch that
fixes generic_remap_check_len(), in the VFS, which was submitted ealier
and has the following subject:

  "fs: allow deduplication of eof block into the end of the destination file"

These two patches address reports from users that started seeing lower
deduplication rates due to the last block never being deduplicated when
the file size is not aligned to the filesystem's block size.

Link: https://lore.kernel.org/linux-btrfs/2019-1576167349.500456@svIo.N5dq.dFFD/
CC: stable@vger.kernel.org # 5.1+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Btrfs: fix missing hole after hole punching and fsync when using NO_HOLES

commit 0e56315ca147b3e60c7bf240233a301d3c7fb508 upstream.

When using the NO_HOLES feature, if we punch a hole into a file and then
fsync it, there are cases where a subsequent fsync will miss the fact that
a hole was punched, resulting in the holes not existing after replaying
the log tree.

Essentially these cases all imply that, tree-log.c:copy_items(), is not
invoked for the leafs that delimit holes, because nothing changed those
leafs in the current transaction. And it's precisely copy_items() where
we currenly detect and log holes, which works as long as the holes are
between file extent items in the input leaf or between the beginning of
input leaf and the previous leaf or between the last item in the leaf
and the next leaf.

First example where we miss a hole:

  *) The extent items of the inode span multiple leafs;

  *) The punched hole covers a range that affects only the extent items of
     the first leaf;

  *) The fsync operation is done in full mode (BTRFS_INODE_NEEDS_FULL_SYNC
     is set in the inode's runtime flags).

  That results in the hole not existing after replaying the log tree.

  For example, if the fs/subvolume tree has the following layout for a
  particular inode:

      Leaf N, generation 10:

      [ ... INODE_ITEM INODE_REF EXTENT_ITEM (0 64K) EXTENT_ITEM (64K 128K) ]

      Leaf N + 1, generation 10:

      [ EXTENT_ITEM (128K 64K) ... ]

  If at transaction 11 we punch a hole coverting the range [0, 128K[, we end
  up dropping the two extent items from leaf N, but we don't touch the other
  leaf, so we end up in the following state:

      Leaf N, generation 11:

      [ ... INODE_ITEM INODE_REF ]

      Leaf N + 1, generation 10:

      [ EXTENT_ITEM (128K 64K) ... ]

  A full fsync after punching the hole will only process leaf N because it
  was modified in the current transaction, but not leaf N + 1, since it
  was not modified in the current transaction (generation 10 and not 11).
  As a result the fsync will not log any holes, because it didn't process
  any leaf with extent items.

Second example where we will miss a hole:

  *) An inode as its items spanning 5 (or more) leafs;

  *) A hole is punched and it covers only the extents items of the 3rd
     leaf. This resulsts in deleting the entire leaf and not touching any
     of the other leafs.

  So the only leaf that is modified in the current transaction, when
  punching the hole, is the first leaf, which contains the inode item.
  During the full fsync, the only leaf that is passed to copy_items()
  is that first leaf, and that's not enough for the hole detection
  code in copy_items() to determine there's a hole between the last
  file extent item in the 2nd leaf and the first file extent item in
  the 3rd leaf (which was the 4th leaf before punching the hole).

Fix this by scanning all leafs and punch holes as necessary when doing a
full fsync (less common than a non-full fsync) when the NO_HOLES feature
is enabled. The lack of explicit file extent items to mark holes makes it
necessary to scan existing extents to determine if holes exist.

A test case for fstests follows soon.

Fixes: 16e7549f045d33 ("Btrfs: incompatible format change to remove hole extents")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix race conditions in ->d_compare() and ->d_hash()

commit ec772f01307a2c06ebf6cdd221e6b518a71ddae7 upstream.

Since ->d_compare() and ->d_hash() can be called in RCU-walk mode,
->d_parent and ->d_inode can be concurrently modified, and in
particular, ->d_inode may be changed to NULL.  For ext4_d_hash() this
resulted in a reproducible NULL dereference if a lookup is done in a
directory being deleted, e.g. with:

int main()
{
if (fork()) {
for (;;) {
mkdir("subdir", 0700);
rmdir("subdir");
}
} else {
for (;;)
access("subdir/file", 0);
}
}

... or by running the 't_encrypted_d_revalidate' program from xfstests.
Both repros work in any directory on a filesystem with the encoding
feature, even if the directory doesn't actually have the casefold flag.

I couldn't reproduce a crash in ext4_d_compare(), but it appears that a
similar crash is possible there.

Fix these bugs by reading ->d_parent and ->d_inode using READ_ONCE() and
falling back to the case sensitive behavior if the inode is NULL.

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Cc: <stable@vger.kernel.org> # v5.2+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20200124041234.159740-1-ebiggers@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>