review.tizen.org Git - platform/kernel/linux-starfive.git/log

perf/core: Fix data race between perf_event_set_output() and perf_mmap_close()

Yang Jihing reported a race between perf_event_set_output() and
perf_mmap_close():

CPU1 CPU2

perf_mmap_close(e2)
  if (atomic_dec_and_test(&e2->rb->mmap_count)) // 1 - > 0
    detach_rest = true

ioctl(e1, IOC_SET_OUTPUT, e2)
  perf_event_set_output(e1, e2)

  ...
  list_for_each_entry_rcu(e, &e2->rb->event_list, rb_entry)
    ring_buffer_attach(e, NULL);
    // e1 isn't yet added and
    // therefore not detached

    ring_buffer_attach(e1, e2->rb)
      list_add_rcu(&e1->rb_entry,
   &e2->rb->event_list)

After this; e1 is attached to an unmapped rb and a subsequent
perf_mmap() will loop forever more:

again:
mutex_lock(&e->mmap_mutex);
if (event->rb) {
...
if (!atomic_inc_not_zero(&e->rb->mmap_count)) {
...
mutex_unlock(&e->mmap_mutex);
goto again;
}
}

The loop in perf_mmap_close() holds e2->mmap_mutex, while the attach
in perf_event_set_output() holds e1->mmap_mutex. As such there is no
serialization to avoid this race.

Change perf_event_set_output() to take both e1->mmap_mutex and
e2->mmap_mutex to alleviate that problem. Additionally, have the loop
in perf_mmap() detach the rb directly, this avoids having to wait for
the concurrent perf_mmap_close() to get around to doing it to make
progress.

Fixes: 9bb5d40cd93c ("perf: Fix mmap() accounting hole")
Reported-by: Yang Jihong <yangjihong1@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Yang Jihong <yangjihong1@huawei.com>
Link: https://lkml.kernel.org/r/YsQ3jm2GR38SW7uD@worktop.programming.kicks-ass.net

Linux 5.19-rc5

lockref: remove unused 'lockref_get_or_lock()' function

Looking at the conditional lock acquire functions in the kernel due to
the new sparse support (see commit 4a557a5d1a61 "sparse: introduce
conditional lock acquire function attribute"), it became obvious that
the lockref code has a couple of them, but they don't match the usual
naming convention for the other ones, and their return value logic is
also reversed.

In the other very similar places, the naming pattern is '*_and_lock()'
(eg 'atomic_put_and_lock()' and 'refcount_dec_and_lock()'), and the
function returns true when the lock is taken.

The lockref code is superficially very similar to the refcount code,
only with the special "atomic wrt the embedded lock" semantics. But
instead of the '*_and_lock()' naming it uses '*_or_lock()'.

And instead of returning true in case it took the lock, it returns true
if it *didn't* take the lock.

Now, arguably the reflock code is quite logical: it really is a "either
decrement _or_ lock" kind of situation - and the return value is about
whether the operation succeeded without any special care needed.

So despite the similarities, the differences do make some sense, and
maybe it's not worth trying to unify the different conditional locking
primitives in this area.

But while looking at this all, it did become obvious that the
'lockref_get_or_lock()' function hasn't actually had any users for
almost a decade.

The only user it ever had was the shortlived 'd_rcu_to_refcount()'
function, and it got removed and replaced with 'lockref_get_not_dead()'
back in 2013 in commits 0d98439ea3c6 ("vfs: use lockred 'dead' flag to
mark unrecoverably dead dentries") and e5c832d55588 ("vfs: fix dentry
RCU to refcounting possibly sleeping dput()")

In fact, that single use was removed less than a week after the whole
function was introduced in commit b3abd80250c1 ("lockref: add
'lockref_get_or_lock() helper") so this function has been around for a
decade, but only had a user for six days.

Let's just put this mis-designed and unused function out of its misery.

We can think about the naming and semantic oddities of the remaining
'lockref_put_or_lock()' later, but at least that function has users.

And while the naming is different and the return value doesn't match,
that function matches the whole '{atomic,refcount}_dec_and_test()'
pattern much better (ie the magic happens when the count goes down to
zero, not when it is incremented from zero).

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

sparse: introduce conditional lock acquire function attribute

The kernel tends to try to avoid conditional locking semantics because
it makes it harder to think about and statically check locking rules,
but we do have a few fundamental locking primitives that take locks
conditionally - most obviously the 'trylock' functions.

That has always been a problem for 'sparse' checking for locking
imbalance, and we've had a special '__cond_lock()' macro that we've used
to let sparse know how the locking works:

    # define __cond_lock(x,c)        ((c) ? ({ __acquire(x); 1; }) : 0)

so that you can then use this to tell sparse that (for example) the
spinlock trylock macro ends up acquiring the lock when it succeeds, but
not when it fails:

    #define raw_spin_trylock(lock)  __cond_lock(lock, _raw_spin_trylock(lock))

and then sparse can follow along the locking rules when you have code like

        if (!spin_trylock(&dentry->d_lock))
                return LRU_SKIP;
.. sparse sees that the lock is held here..
        spin_unlock(&dentry->d_lock);

and sparse ends up happy about the lock contexts.

However, this '__cond_lock()' use does result in very ugly header files,
and requires you to basically wrap the real function with that macro
that uses '__cond_lock'.  Which has made PeterZ NAK things that try to
fix sparse warnings over the years [1].

To solve this, there is now a very experimental patch to sparse that
basically does the exact same thing as '__cond_lock()' did, but using a
function attribute instead.  That seems to make PeterZ happy [2].

Note that this does not replace existing use of '__cond_lock()', but
only exposes the new proposed attribute and uses it for the previously
unannotated 'refcount_dec_and_lock()' family of functions.

For existing sparse installations, this will make no difference (a
negative output context was ignored), but if you have the experimental
sparse patch it will make sparse now understand code that uses those
functions, the same way '__cond_lock()' makes sparse understand the very
similar 'atomic_dec_and_lock()' uses that have the old '__cond_lock()'
annotations.

Note that in some cases this will silence existing context imbalance
warnings.  But in other cases it may end up exposing new sparse warnings
for code that sparse just didn't see the locking for at all before.

This is a trial, in other words.  I'd expect that if it ends up being
successful, and new sparse releases end up having this new attribute,
we'll migrate the old-style '__cond_lock()' users to use the new-style
'__cond_acquires' function attribute.

The actual experimental sparse patch was posted in [3].

Link: https://lore.kernel.org/all/20130930134434.GC12926@twins.programming.kicks-ass.net/
Link: https://lore.kernel.org/all/Yr60tWxN4P568x3W@worktop.programming.kicks-ass.net/
Link: https://lore.kernel.org/all/CAHk-=wjZfO9hGqJ2_hGQG3U_XzSh9_XaXze=HgPdvJbgrvASfA@mail.gmail.com/
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Alexander Aring <aahringo@redhat.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'xfs-5.19-fixes-4' of git://git./fs/xfs/xfs-linux

Pull xfs fixes from Darrick Wong:
"This fixes some stalling problems and corrects the last of the
  problems (I hope) observed during testing of the new atomic xattr
  update feature.

   - Fix statfs blocking on background inode gc workers

   - Fix some broken inode lock assertion code

   - Fix xattr leaf buffer leaks when cancelling a deferred xattr update
     operation

   - Clean up xattr recovery to make it easier to understand.

   - Fix xattr leaf block verifiers tripping over empty blocks.

   - Remove complicated and error prone xattr leaf block bholding mess.

   - Fix a bug where an rt extent crossing EOF was treated as "posteof"
     blocks and cleaned unnecessarily.

   - Fix a UAF when log shutdown races with unmount"

* tag 'xfs-5.19-fixes-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: prevent a UAF when log IO errors race with unmount
  xfs: dont treat rt extents beyond EOF as eofblocks to be cleared
  xfs: don't hold xattr leaf buffers across transaction rolls
  xfs: empty xattr leaf header blocks are not corruption
  xfs: clean up the end of xfs_attri_item_recover
  xfs: always free xattri_leaf_bp when cancelling a deferred op
  xfs: use invalidate_lock to check the state of mmap_lock
  xfs: factor out the common lock flags assert
  xfs: introduce xfs_inodegc_push()
  xfs: bound maximum wait time for inodegc work

Merge tag 'nfsd-5.19-2' of git://git./linux/kernel/git/cel/linux

Pull nfsd fixes from Chuck Lever:
"Notable regression fixes:

   - Fix NFSD crash during NFSv4.2 READ_PLUS operation

   - Fix incorrect status code returned by COMMIT operation"

* tag 'nfsd-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix READ_PLUS crasher
  NFSD: restore EINVAL error translation in nfsd_commit()

Merge tag 'for-5.19/parisc-4' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc architecture fixes from Helge Deller:
"Two important fixes for bugs in code which was added in 5.18:

   - Fix userspace signal failures on 32-bit kernel due to a bug in vDSO

   - Fix 32-bit load-word unalignment exception handler which returned
     wrong values"

* tag 'for-5.19/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix vDSO signal breakage on 32-bit kernel
  parisc/unaligned: Fix emulate_ldw() breakage

parisc: Fix vDSO signal breakage on 32-bit kernel

Addition of vDSO support for parisc in kernel v5.18 suddenly broke glibc
signal testcases on a 32-bit kernel.

The trampoline code (sigtramp.S) which is mapped into userspace includes
an offset to the context data on the stack, which is used by gdb and
glibc to get access to registers.

In a 32-bit kernel we used by mistake the offset into the compat context
(which is valid on a 64-bit kernel only) instead of the offset into the
"native" 32-bit context.

Reported-by: John David Anglin <dave.anglin@bell.net>
Tested-by: John David Anglin <dave.anglin@bell.net>
Fixes: df24e1783e6e ("parisc: Add vDSO support")
CC: stable@vger.kernel.org # 5.18
Signed-off-by: Helge Deller <deller@gmx.de>

Merge tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git./linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

- BPF program info linear (BPIL) data is accessed assuming 64-bit
   alignment resulting in undefined behavior as the data is just byte
   aligned. Fix it, Found using -fsanitize=undefined.

- Fix 'perf offcpu' build on old kernels wrt task_struct's
   state/__state field.

- Fix perf_event_attr.sample_type setting on the 'offcpu-time' event
   synthesized by the 'perf offcpu' tool.

- Don't bail out when synthesizing PERF_RECORD_ events for pre-existing
   threads when one goes away while parsing its procfs entries.

- Don't sort the task scan result from /proc, its not needed and
   introduces bugs when the main thread isn't the first one to be
   processed.

- Fix uninitialized 'offset' variable on aarch64 in the unwind code.

- Sync KVM headers with the kernel sources.

* tag 'perf-tools-fixes-for-v5.19-2022-07-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf synthetic-events: Ignore dead threads during event synthesis
  perf synthetic-events: Don't sort the task scan result from /proc
  perf unwind: Fix unitialized 'offset' variable on aarch64
  tools headers UAPI: Sync linux/kvm.h with the kernel sources
  perf bpf: 8 byte align bpil data
  tools kvm headers arm64: Update KVM headers from the kernel sources
  perf offcpu: Accept allowed sample types only
  perf offcpu: Fix build failure on old kernels

Merge tag 'powerpc-5.19-4' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fixes from Michael Ellerman:

- Fix BPF uapi confusion about the correct type of bpf_user_pt_regs_t.

- Fix virt_addr_valid() when memory is hotplugged above the boot-time
   high_memory value.

- Fix a bug in 64-bit Book3E map_kernel_page() which would incorrectly
   allocate a PMD page at PUD level.

- Fix a couple of minor issues found since we enabled KASAN for 64-bit
   Book3S.

Thanks to Aneesh Kumar K.V, Cédric Le Goater, Christophe Leroy, Kefeng
Wang, Liam Howlett, Nathan Lynch, and Naveen N. Rao.

* tag 'powerpc-5.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/memhotplug: Add add_pages override for PPC
  powerpc/bpf: Fix use of user_pt_regs in uapi
  powerpc/prom_init: Fix kernel config grep
  powerpc/book3e: Fix PUD allocation size in map_kernel_page()
  powerpc/xive/spapr: correct bitmap allocation size

perf synthetic-events: Ignore dead threads during event synthesis

When it synthesize various task events, it scans the list of task
first and then accesses later. There's a window threads can die
between the two and proc entries may not be available.

Instead of bailing out, we can ignore that thread and move on.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf synthetic-events: Don't sort the task scan result from /proc

It should not sort the result as procfs already returns a proper
ordering of tasks. Actually sorting the order caused problems that it
doesn't guararantee to process the main thread first.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Fix unitialized 'offset' variable on aarch64

Commit dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked
objects") uncovered the following issue on aarch64:

    util/unwind-libunwind-local.c: In function 'find_proc_info':
    util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    386 |                         if (ofs > 0) {
        |                            ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    371 |                 if (ofs <= 0) {
        |                    ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
    363 |                 if (ofs <= 0) {
        |                    ^
    util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
    199 |         u64 address, offset;
        |                      ^~~~~~
    In file included from util/libunwind/arm64.c:37:

Fixes: dc2cf4ca866f5715 ("perf unwind: Fix segbase for ld.lld linked objects")
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@cloudflare.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'libnvdimm-fixes-5.19-rc5' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull libnvdimm fix from Vishal Verma:

- Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
   where accounting for poison blocks to be cleared was off by one,
   causing a failure to clear the the last badblock in an nvdimm region.

* tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  nvdimm: Fix badblocks clear off-by-one error

Merge tag 'thermal-5.19-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull thermal control fix from Rafael Wysocki:
"Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar)"

* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake

Merge tag 'pm-5.19-rc5' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:

   - Fix error code path issues related PROBE_DEFER handling in devfreq
     (Christian Marangi)

   - Revert an editing accident in SPDX-License line in the devfreq
     passive governor (Lukas Bulwahn)

   - Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
     devfreq driver (Miaoqian Lin)

   - Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)

   - Fix missing of_node_put for qoriq and pmac32 driver (Liang He)

   - Fix issues around throttle interrupt for qcom driver (Stephen Boyd)

   - Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
     Regno)

   - Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"

* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / devfreq: passive: revert an editing accident in SPDX-License line
  PM / devfreq: Fix kernel warning with cpufreq passive register fail
  PM / devfreq: Rework freq_table to be local to devfreq struct
  PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
  PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
  PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
  PM / devfreq: Mute warning on governor PROBE_DEFER
  PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
  cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
  cpufreq: pmac32-cpufreq: Fix refcount leak bug
  cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
  drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
  cpufreq: amd-pstate: Add resume and suspend callbacks

Merge branch 'pm-cpufreq'

Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the
following one:

- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).

* pm-cpufreq:
  cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
  cpufreq: pmac32-cpufreq: Fix refcount leak bug
  cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
  drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
  cpufreq: amd-pstate: Add resume and suspend callbacks

Merge tag 'hwmon-for-v5.19-rc5' of git://git./linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:

- Fix error handling in ibmaem driver initialization

- Fix bad data reported by occ driver after setting power cap

- Fix typos in pmbus/ucd9200 driver comments

* tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
  hwmon: (pmbus/ucd9200) fix typos in comments
  hwmon: (occ) Prevent power cap command overwriting poll response

hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails

If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.

Fixes: 8808a793f052 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Merge tag 'arm64-fixes' of git://git./linux/kernel/git/arm64/linux

Pull arm64 fix from Catalin Marinas:
"Restore TLB invalidation for the 'break-before-make' rule on
contiguous ptes (missed in a recent clean-up)"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes

Merge tag 's390-5.19-5' of git://git./linux/kernel/git/s390/linux

Pull s390 fixes from Alexander Gordeev:

- Fix purgatory build process so bin2c tool does not get built
   unnecessarily and the Makefile is more consistent with other
   architectures.

- Return earlier simple design of arch_get_random_seed_long|int() and
   arch_get_random_long|int() callbacks as result of changes in generic
   RNG code.

- Fix minor comment typos and spelling mistakes.

* tag 's390-5.19-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/qdio: Fix spelling mistake
  s390/sclp: Fix typo in comments
  s390/archrandom: simplify back to earlier design and initialize earlier
  s390/purgatory: remove duplicated build rule of kexec-purgatory.o
  s390/purgatory: hard-code obj-y in Makefile
  s390: remove unneeded 'select BUILD_BIN2C'

Merge tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:

- Allocate a fattr for _nfs4_discover_trunking()

- Fix module reference count leak in nfs4_run_state_manager()

* tag 'nfs-for-5.19-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
NFSv4: Add an fattr allocation to _nfs4_discover_trunking()
NFS: restore module put when manager exits.

Merge tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client

Pull ceph fix from Ilya Dryomov:
"A ceph filesystem fix, marked for stable.

  There appears to be a deeper issue on the MDS side, but for now we are
  going with this one-liner to avoid busy looping and potential soft
  lockups"

* tag 'ceph-for-5.19-rc5' of https://github.com/ceph/ceph-client:
  ceph: wait on async create before checking caps for syncfs

Merge tag 'for-5.19/dm-fixes-5' of git://git./linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:
"Three fixes for invalid memory accesses discovered by using KASAN
  while running the lvm2 testsuite's dm-raid tests. Includes changes to
  MD's raid5.c given the dependency dm-raid has on the MD code"

* tag 'for-5.19/dm-fixes-5' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm raid: fix KASAN warning in raid5_add_disks
  dm raid: fix KASAN warning in raid5_remove_disk
  dm raid: fix accesses beyond end of raid member array

Merge tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block

Pull io_uring fixes from Jens Axboe:
"Two minor tweaks:

   - While we still can, adjust the send/recv based flags to be in
     ->ioprio rather than in ->addr2. This is consistent with eg accept,
     and also doesn't waste a full 64-bit field for flags (Pavel)

   - 5.18-stable fix for re-importing provided buffers. Not much real
     world relevance here as it'll only impact non-pollable files gone
     async, which is more of a practical test case rather than something
     that is used in the wild (Dylan)"

* tag 'io_uring-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
  io_uring: fix provided buffer import
  io_uring: keep sendrecv flags in ioprio

Merge tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

- Fix for batch getting of tags in sbitmap (wuchi)

- NVMe pull request via Christoph:
      - More quirks (Lamarque Vieira Souza, Pablo Greco)
      - Fix a fabrics disconnect regression (Ruozhu Li)
      - Fix a nvmet-tcp data_digest calculation regression (Sagi
        Grimberg)
      - Fix nvme-tcp send failure handling (Sagi Grimberg)
      - Fix a regression with nvmet-loop and passthrough controllers
        (Alan Adamson)

* tag 'block-5.19-2022-07-01' of git://git.kernel.dk/linux-block:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
  nvmet: add a clear_ids attribute for passthru targets
  nvme: fix regression when disconnect a recovering ctrl
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
  nvme-tcp: always fail a request when sending it failed
  nvmet-tcp: fix regression in data_digest calculation
  lib/sbitmap: Fix invalid loop in __sbitmap_queue_get_batch()

Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi

Pull SCSI fix from James Bottomley:
"One simple driver fix for a dma overrun"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: hisi_sas: Limit max hw sectors for v3 HW

Merge tag 'ata-5.19-rc5' of git://git./linux/kernel/git/dlemoal/libata

Pull ATA fix from Damien Le Moal:

- Fix a compilation warning with some versions of gcc/sparse when
compiling the pata_cs5535 driver, from John.

* tag 'ata-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: pata_cs5535: Fix W=1 warnings

arm64: hugetlb: Restore TLB invalidation for BBM on contiguous ptes

Commit fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
removed TLB invalidation from get_clear_flush() [now get_clear_contig()]
on the basis that the core TLB invalidation code is aware of hugetlb
mappings backed by contiguous page-table entries and will cover the
correct virtual address range.

However, this change also resulted in the TLB invalidation being removed
from the "break" step in the break-before-make (BBM) sequence used
internally by huge_ptep_set_{access_flags,wrprotect}(), therefore
making the BBM sequence unsafe irrespective of later invalidation.

Although the architecture is desperately unclear about how exactly
contiguous ptes should be updated in a live page-table, restore TLB
invalidation to our BBM sequence under the assumption that BBM is the
right thing to be doing in the first place.

Fixes: fb396bb459c1 ("arm64/hugetlb: Drop TLB flush from get_clear_flush()")
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/20220629095349.25748-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Merge tag 'clk-fixes-for-linus' of git://git./linux/kernel/git/clk/linux

Pull clk fixes from Stephen Boyd:
"Two small fixes

   - Initialize a spinlock in the stm32 reset code

   - Add dt bindings to the clk maintainer filepattern"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  MAINTAINERS: add include/dt-bindings/clock to COMMON CLK FRAMEWORK
  clk: stm32: rcc_reset: Fix missing spin_lock_init()

xfs: prevent a UAF when log IO errors race with unmount

KASAN reported the following use after free bug when running
generic/475:

XFS (dm-0): Mounting V5 Filesystem
XFS (dm-0): Starting recovery (logdev: internal)
XFS (dm-0): Ending recovery (logdev: internal)
Buffer I/O error on dev dm-0, logical block 20639616, async page read
Buffer I/O error on dev dm-0, logical block 20639617, async page read
XFS (dm-0): log I/O error -5
XFS (dm-0): Filesystem has been shut down due to log error (0x2).
XFS (dm-0): Unmounting Filesystem
XFS (dm-0): Please unmount the filesystem and rectify the problem(s).
==================================================================
BUG: KASAN: use-after-free in do_raw_spin_lock+0x246/0x270
Read of size 4 at addr ffff888109dd84c4 by task 3:1H/136

CPU: 3 PID: 136 Comm: 3:1H Not tainted 5.19.0-rc4-xfsx #rc4 8e53ab5ad0fddeb31cee5e7063ff9c361915a9c4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
Workqueue: xfs-log/dm-0 xlog_ioend_work [xfs]
Call Trace:
  <TASK>
  dump_stack_lvl+0x34/0x44
  print_report.cold+0x2b8/0x661
  ? do_raw_spin_lock+0x246/0x270
  kasan_report+0xab/0x120
  ? do_raw_spin_lock+0x246/0x270
  do_raw_spin_lock+0x246/0x270
  ? rwlock_bug.part.0+0x90/0x90
  xlog_force_shutdown+0xf6/0x370 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
  xlog_ioend_work+0x100/0x190 [xfs 4ad76ae0d6add7e8183a553e624c31e9ed567318]
  process_one_work+0x672/0x1040
  worker_thread+0x59b/0xec0
  ? __kthread_parkme+0xc6/0x1f0
  ? process_one_work+0x1040/0x1040
  ? process_one_work+0x1040/0x1040
  kthread+0x29e/0x340
  ? kthread_complete_and_exit+0x20/0x20
  ret_from_fork+0x1f/0x30
  </TASK>

Allocated by task 154099:
  kasan_save_stack+0x1e/0x40
  __kasan_kmalloc+0x81/0xa0
  kmem_alloc+0x8d/0x2e0 [xfs]
  xlog_cil_init+0x1f/0x540 [xfs]
  xlog_alloc_log+0xd1e/0x1260 [xfs]
  xfs_log_mount+0xba/0x640 [xfs]
  xfs_mountfs+0xf2b/0x1d00 [xfs]
  xfs_fs_fill_super+0x10af/0x1910 [xfs]
  get_tree_bdev+0x383/0x670
  vfs_get_tree+0x7d/0x240
  path_mount+0xdb7/0x1890
  __x64_sys_mount+0x1fa/0x270
  do_syscall_64+0x2b/0x80
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 154151:
  kasan_save_stack+0x1e/0x40
  kasan_set_track+0x21/0x30
  kasan_set_free_info+0x20/0x30
  ____kasan_slab_free+0x110/0x190
  slab_free_freelist_hook+0xab/0x180
  kfree+0xbc/0x310
  xlog_dealloc_log+0x1b/0x2b0 [xfs]
  xfs_unmountfs+0x119/0x200 [xfs]
  xfs_fs_put_super+0x6e/0x2e0 [xfs]
  generic_shutdown_super+0x12b/0x3a0
  kill_block_super+0x95/0xd0
  deactivate_locked_super+0x80/0x130
  cleanup_mnt+0x329/0x4d0
  task_work_run+0xc5/0x160
  exit_to_user_mode_prepare+0xd4/0xe0
  syscall_exit_to_user_mode+0x1d/0x40
  entry_SYSCALL_64_after_hwframe+0x46/0xb0

This appears to be a race between the unmount process, which frees the
CIL and waits for in-flight iclog IO; and the iclog IO completion.  When
generic/475 runs, it starts fsstress in the background, waits a few
seconds, and substitutes a dm-error device to simulate a disk falling
out of a machine.  If the fsstress encounters EIO on a pure data write,
it will exit but the filesystem will still be online.

The next thing the test does is unmount the filesystem, which tries to
clean the log, free the CIL, and wait for iclog IO completion.  If an
iclog was being written when the dm-error switch occurred, it can race
with log unmounting as follows:

Thread 1 Thread 2

xfs_log_unmount
xfs_log_clean
xfs_log_quiesce
xlog_ioend_work
<observe error>
xlog_force_shutdown
test_and_set_bit(XLOG_IOERROR)
xfs_log_force
<log is shut down, nop>
xfs_log_umount_write
<log is shut down, nop>
xlog_dealloc_log
xlog_cil_destroy
<wait for iclogs>
spin_lock(&log->l_cilp->xc_push_lock)
<KABOOM>

Therefore, free the CIL after waiting for the iclogs to complete.  I
/think/ this race has existed for quite a few years now, though I don't
remember the ~2014 era logging code well enough to know if it was a real
threat then or if the actual race was exposed only more recently.

Fixes: ac983517ec59 ("xfs: don't sleep in xlog_cil_force_lsn on shutdown")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

Merge tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm

Pull drm fixes from Dave Airlie:
"Bit quieter this week, the main thing is it pulls in the fixes for the
  sysfb resource issue you were seeing. these had been queued for next
  so should have had some decent testing.

  Otherwise amdgpu, i915 and msm each have a few fixes, and vc4 has one.

  fbdev:
   - sysfb fixes/conflicting fb fixes

  amdgpu:
   - GPU recovery fix

   - Fix integer type usage in fourcc header for AMD modifiers

   - KFD TLB flush fix for gfx9 APUs

   - Display fix

  i915:
   - Fix ioctl argument error return

   - Fix d3cold disable to allow PCI upstream bridge D3 transition

   - Fix setting cache_dirty for dma-buf objects on discrete

  msm:
   - Fix to increment vsync_cnt before calling drm_crtc_handle_vblank so
     that userspace sees the value *after* it is incremented if waiting
     for vblank events

   - Fix to reset drm_dev to NULL in dp_display_unbind to avoid a crash
     in probe/bind error paths

   - Fix to resolve the smatch error of de-referencing before NULL check
     in dpu_encoder_phys_wb.c

   - Fix error return to userspace if fence-id allocation fails in
     submit ioctl

  vc4:
   - NULL ptr dereference fix"

* tag 'drm-fixes-2022-07-01' of git://anongit.freedesktop.org/drm/drm:
  Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"
  drm/amdgpu: To flush tlb for MMHUB of RAVEN series
  drm/fourcc: fix integer type usage in uapi header
  drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()
  fbdev: Disable sysfb device registration when removing conflicting FBs
  firmware: sysfb: Add sysfb_disable() helper function
  firmware: sysfb: Make sysfb_create_simplefb() return a pdev pointer
  drm/msm/gem: Fix error return on fence id alloc fail
  drm/i915: tweak the ordering in cpu_write_needs_clflush
  drm/i915/dgfx: Disable d3cold at gfx root port
  drm/i915/gem: add missing else
  drm/vc4: perfmon: Fix variable dereferenced before check
  drm/msm/dpu: Fix variable dereferenced before check
  drm/msm/dp: reset drm_dev to NULL at dp_display_unbind()
  drm/msm/dpu: Increment vsync_cnt before waking up userspace

Merge tag 'drm-misc-fixes-2022-06-30' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

A NULL pointer dereference fix for vc4, and 3 patches to improve the
sysfb device behaviour when removing conflicting framebuffers

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220630072404.2fa4z3nk5h5q34ci@houat

Merge tag 'net-5.19-rc5' of git://git./linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.

  Current release - new code bugs:

   - clear msg_get_inq in __sys_recvfrom() and __copy_msghdr_from_user()

   - mptcp:
      - invoke MP_FAIL response only when needed
      - fix shutdown vs fallback race
      - consistent map handling on failure

   - octeon_ep: use bitwise AND

  Previous releases - regressions:

   - tipc: move bc link creation back to tipc_node_create, fix NPD

  Previous releases - always broken:

   - tcp: add a missing nf_reset_ct() in 3WHS handling to prevent socket
     buffered skbs from keeping refcount on the conntrack module

   - ipv6: take care of disable_policy when restoring routes

   - tun: make sure to always disable and unlink NAPI instances

   - phy: don't trigger state machine while in suspend

   - netfilter: nf_tables: avoid skb access on nf_stolen

   - asix: fix "can't send until first packet is send" issue

   - usb: asix: do not force pause frames support

   - nxp-nci: don't issue a zero length i2c_master_read()

  Misc:

   - ncsi: allow use of proper "mellanox" DT vendor prefix

   - act_api: add a message for user space if any actions were already
     flushed before the error was hit"

* tag 'net-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (55 commits)
  net: dsa: felix: fix race between reading PSFP stats and port stats
  selftest: tun: add test for NAPI dismantle
  net: tun: avoid disabling NAPI twice
  net: sparx5: mdb add/del handle non-sparx5 devices
  net: sfp: fix memory leak in sfp_probe()
  mlxsw: spectrum_router: Fix rollback in tunnel next hop init
  net: rose: fix UAF bugs caused by timer handler
  net: usb: ax88179_178a: Fix packet receiving
  net: bonding: fix use-after-free after 802.3ad slave unbind
  ipv6: fix lockdep splat in in6_dump_addrs()
  net: phy: ax88772a: fix lost pause advertisement configuration
  net: phy: Don't trigger state machine while in suspend
  usbnet: fix memory allocation in helpers
  selftests net: fix kselftest net fatal error
  NFC: nxp-nci: don't print header length mismatch on i2c error
  NFC: nxp-nci: Don't issue a zero length i2c_master_read()
  net: tipc: fix possible refcount leak in tipc_sk_create()
  nfc: nfcmrvl: Fix irq_of_parse_and_map() return value
  net: ipv6: unexport __init-annotated seg6_hmac_net_init()
  ipv6/sit: fix ipip6_tunnel_get_prl return value
  ...

vfs: fix copy_file_range() regression in cross-fs copies

A regression has been reported by Nicolas Boichat, found while using the
copy_file_range syscall to copy a tracefs file.

Before commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices") the kernel would return -EXDEV to userspace when trying to
copy a file across different filesystems.  After this commit, the
syscall doesn't fail anymore and instead returns zero (zero bytes
copied), as this file's content is generated on-the-fly and thus reports
a size of zero.

Another regression has been reported by He Zhe - the assertion of
WARN_ON_ONCE(ret == -EOPNOTSUPP) can be triggered from userspace when
copying from a sysfs file whose read operation may return -EOPNOTSUPP.

Since we do not have test coverage for copy_file_range() between any two
types of filesystems, the best way to avoid these sort of issues in the
future is for the kernel to be more picky about filesystems that are
allowed to do copy_file_range().

This patch restores some cross-filesystem copy restrictions that existed
prior to commit 5dae222a5ff0 ("vfs: allow copy_file_range to copy across
devices"), namely, cross-sb copy is not allowed for filesystems that do
not implement ->copy_file_range().

Filesystems that do implement ->copy_file_range() have full control of
the result - if this method returns an error, the error is returned to
the user.  Before this change this was only true for fs that did not
implement the ->remap_file_range() operation (i.e.  nfsv3).

Filesystems that do not implement ->copy_file_range() still fall-back to
the generic_copy_file_range() implementation when the copy is within the
same sb.  This helps the kernel can maintain a more consistent story
about which filesystems support copy_file_range().

nfsd and ksmbd servers are modified to fall-back to the
generic_copy_file_range() implementation in case vfs_copy_file_range()
fails with -EOPNOTSUPP or -EXDEV, which preserves behavior of
server-side-copy.

fall-back to generic_copy_file_range() is not implemented for the smb
operation FSCTL_DUPLICATE_EXTENTS_TO_FILE, which is arguably a correct
change of behavior.

Fixes: 5dae222a5ff0 ("vfs: allow copy_file_range to copy across devices")
Link: https://lore.kernel.org/linux-fsdevel/20210212044405.4120619-1-drinkcat@chromium.org/
Link: https://lore.kernel.org/linux-fsdevel/CANMq1KDZuxir2LM5jOTm0xx+BnvW=ZmpsG47CyHFJwnw7zSX6Q@mail.gmail.com/
Link: https://lore.kernel.org/linux-fsdevel/20210126135012.1.If45b7cdc3ff707bc1efa17f5366057d60603c45f@changeid/
Link: https://lore.kernel.org/linux-fsdevel/20210630161320.29006-1-lhenriques@suse.de/
Reported-by: Nicolas Boichat <drinkcat@chromium.org>
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Luis Henriques <lhenriques@suse.de>
Fixes: 64bf5ff58dff ("vfs: no fallback for ->copy_file_range")
Link: https://lore.kernel.org/linux-fsdevel/20f17f64-88cb-4e80-07c1-85cb96c83619@windriver.com/
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SUNRPC: Fix READ_PLUS crasher

Looks like there are still cases when "space_left - frag1bytes" can
legitimately exceed PAGE_SIZE. Ensure that xdr->end always remains
within the current encode buffer.

Reported-by: Bruce Fields <bfields@fieldses.org>
Reported-by: Zorro Lang <zlang@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216151
Fixes: 6c254bf3b637 ("SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

NFSv4: Add an fattr allocation to _nfs4_discover_trunking()

This was missed in c3ed222745d9 ("NFSv4: Fix free of uninitialized
nfs4_label on referral lookup.") and causes a panic when mounting
with '-o trunkdiscovery':

PID: 1604   TASK: ffff93dac3520000  CPU: 3   COMMAND: "mount.nfs"
#0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee
#1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd
#2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed
#3 [ffffb79140f73a30] oops_end at ffffffffaec2658d
#4 [ffffb79140f73a50] general_protection at ffffffffaf60111e
    [exception RIP: nfs_fattr_init+0x5]
    RIP: ffffffffc0c18265  RSP: ffffb79140f73b08  RFLAGS: 00010246
    RAX: 0000000000000000  RBX: ffff93dac304a800  RCX: 0000000000000000
    RDX: ffffb79140f73bb0  RSI: ffff93dadc8cbb40  RDI: d03ee11cfaf6bd50
    RBP: ffffb79140f73be8   R8: ffffffffc0691560   R9: 0000000000000006
    R10: ffff93db3ffd3df8  R11: 0000000000000000  R12: ffff93dac4040000
    R13: ffff93dac2848e00  R14: ffffb79140f73b60  R15: ffffb79140f73b30
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
#5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4]
#6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4]
#7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4]
#8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs]
#9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs]
    RIP: 00007f6254fce26e  RSP: 00007ffc69496ac8  RFLAGS: 00000246
    RAX: ffffffffffffffda  RBX: 0000000000000000  RCX: 00007f6254fce26e
    RDX: 00005600220a82a0  RSI: 00005600220a64d0  RDI: 00005600220a6520
    RBP: 00007ffc69496c50   R8: 00005600220a8710   R9: 003035322e323231
    R10: 0000000000000000  R11: 0000000000000246  R12: 00007ffc69496c50
    R13: 00005600220a8440  R14: 0000000000000010  R15: 0000560020650ef9
    ORIG_RAX: 00000000000000a5  CS: 0033  SS: 002b

Fixes: c3ed222745d9 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.")
Signed-off-by: Scott Mayhew <smayhew@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

NFS: restore module put when manager exits.

Commit f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module") removed
calls to module_put_and_kthread_exit() from threads that acted as SUNRPC
servers and had a related svc_serv_ops structure. This was correct.

It ALSO removed the module_put_and_kthread_exit() call from
nfs4_run_state_manager() which is NOT a SUNRPC service.

Consequently every time the NFSv4 state manager runs the module count
increments and won't be decremented. So the nfsv4 module cannot be
unloaded.

So restore the module_put_and_kthread_exit() call.

Fixes: f49169c97fce ("NFSD: Remove svc_serv_ops::svo_module")
Signed-off-by: NeilBrown <neilb@suse.de>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Merge tag 'nvme-5.19-2022-06-30' of git://git.infradead.org/nvme into block-5.19

Pull NVMe fixes from Christoph:

"nvme fixes for Linux 5.19

- more quirks (Lamarque Vieira Souza, Pablo Greco)
- fix a fabrics disconnect regression (Ruozhu Li)
- fix a nvmet-tcp data_digest calculation regression (Sagi Grimberg)
- fix nvme-tcp send failure handling (Sagi Grimberg)
- fix a regression with nvmet-loop and passthrough controllers
   (Alan Adamson)"

* tag 'nvme-5.19-2022-06-30' of git://git.infradead.org/nvme:
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1
  nvmet: add a clear_ids attribute for passthru targets
  nvme: fix regression when disconnect a recovering ctrl
  nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)
  nvme-tcp: always fail a request when sending it failed
  nvmet-tcp: fix regression in data_digest calculation

net: dsa: felix: fix race between reading PSFP stats and port stats

Both PSFP stats and the port stats read by ocelot_check_stats_work() are
indirectly read through the same mechanism - write to STAT_CFG:STAT_VIEW,
read from SYS:STAT:CNT[n].

It's just that for port stats, we write STAT_VIEW with the index of the
port, and for PSFP stats, we write STAT_VIEW with the filter index.

So if we allow them to run concurrently, ocelot_check_stats_work() may
change the view from vsc9959_psfp_counters_get(), and vice versa.

Fixes: 7d4b564d6add ("net: dsa: felix: support psfp filter on vsc9959")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220629183007.3808130-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftest: tun: add test for NAPI dismantle

Being lazy does not pay, add the test for various
ordering of tun queue close / detach / destroy.

Link: https://lore.kernel.org/r/20220629181911.372047-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: tun: avoid disabling NAPI twice

Eric reports that syzbot made short work out of my speculative
fix. Indeed when queue gets detached its tfile->tun remains,
so we would try to stop NAPI twice with a detach(), close()
sequence.

Alternative fix would be to move tun_napi_disable() to
tun_detach_all() and let the NAPI run after the queue
has been detached.

Fixes: a8fc8cb5692a ("net: tun: stop NAPI when detaching queues")
Reported-by: syzbot <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220629181911.372047-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: sparx5: mdb add/del handle non-sparx5 devices

When adding/deleting mdb entries on other net_devices, eg., tap
interfaces, it should not crash.

Fixes: 3bacfccdcb2d ("net: sparx5: Add mdb handlers")
Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Link: https://lore.kernel.org/r/20220630122226.316812-1-casper.casan@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake

Add RaptorLake to the list of processor models supported by the Intel
TCC cooling driver.

Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
[ rjw: Subject edits, new changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

s390/qdio: Fix spelling mistake

Change 'defineable' to 'definable'.
Change 'paramater' to 'parameter'.

Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Link: https://lore.kernel.org/r/20220623060543.12870-1-jiaming@nfschina.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/sclp: Fix typo in comments

Remove the repeated word 'and' from comments

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220622142713.14187-1-jiangjian@cdjrlc.com
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/archrandom: simplify back to earlier design and initialize earlier

s390x appears to present two RNG interfaces:
- a "TRNG" that gathers entropy using some hardware function; and
- a "DRBG" that takes in a seed and expands it.

Previously, the TRNG was wired up to arch_get_random_{long,int}(), but
it was observed that this was being called really frequently, resulting
in high overhead. So it was changed to be wired up to arch_get_random_
seed_{long,int}(), which was a reasonable decision. Later on, the DRBG
was then wired up to arch_get_random_{long,int}(), with a complicated
buffer filling thread, to control overhead and rate.

Fortunately, none of the performance issues matter much now. The RNG
always attempts to use arch_get_random_seed_{long,int}() first, which
means a complicated implementation of arch_get_random_{long,int}() isn't
really valuable or useful to have around. And it's only used when
reseeding, which means it won't hit the high throughput complications
that were faced before.

So this commit returns to an earlier design of just calling the TRNG in
arch_get_random_seed_{long,int}(), and returning false in arch_get_
random_{long,int}().

Part of what makes the simplification possible is that the RNG now seeds
itself using the TRNG at bootup. But this only works if the TRNG is
detected early in boot, before random_init() is called. So this commit
also causes that check to happen in setup_arch().

Cc: stable@vger.kernel.org
Cc: Harald Freudenberger <freude@linux.ibm.com>
Cc: Ingo Franzki <ifranzki@linux.ibm.com>
Cc: Juergen Christ <jchrist@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Link: https://lore.kernel.org/r/20220610222023.378448-1-Jason@zx2c4.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

io_uring: fix provided buffer import

io_import_iovec uses the s pointer, but this was changed immediately
after the iovec was re-imported and so it was imported into the wrong
place.

Change the ordering.

Fixes: 2be2eb02e2f5 ("io_uring: ensure reads re-import for selected buffers")
Signed-off-by: Dylan Yudaken <dylany@fb.com>
Link: https://lore.kernel.org/r/20220630132006.2825668-1-dylany@fb.com
[axboe: ensure we don't half-import as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'for-linus' of git://git./linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
"Three minor bug fixes:

   - qedr not setting the QP timeout properly toward userspace

   - Memory leak on error path in ib_cm

   - Divide by 0 in RDMA interrupt moderation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  linux/dim: Fix divide by 0 in RDMA DIM
  RDMA/cm: Fix memory leak in ib_cm_insert_listen
  RDMA/qedr: Fix reporting QP timeout attribute

Merge tag 'fsnotify_for_v5.19-rc5' of git://git./linux/kernel/git/jack/linux-fs

Pull fanotify fix from Jan Kara:
"A fix for recently added fanotify API to have stricter checks and
  refuse some invalid flag combinations to make our life easier in the
  future"

* tag 'fsnotify_for_v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fanotify: refine the validation checks on non-dir inode mask

Merge tag 'v5.19-p3' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto fix from Herbert Xu:
"Fix a regression that breaks the ccp driver"

* tag 'v5.19-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ccp - Fix device IRQ counting by using platform_irq_count()

Merge tag 'devfreq-fixes-for-5.19-rc5' of git://git./linux/kernel/git/chanwoo/linux

Pull devfreq fixes for 5.19-rc5 from Chanwoo Choi:

"1. Fix devfreq passive governor issue when cpufreq policies are not
    ready during kernel boot because some CPUs turn on after kernel
    booting or others.

    - Re-initialize the vairables of struct devfreq_passive_data when
      PROBE_DEFER happens when cpufreq_get() returns NULL.

    - Use dev_err_probe to mute warning when PROBE_DEFER.

    - Fix cpufreq passive unregister erroring on PROBE_DEFER
      by using the allocated parent_cpu_data list to free resouce
      instead of for_each_possible_cpu().

    - Remove duplicate cpufreq passive unregister and warning when
      PROBE_DEFER.

    - Use HZ_PER_KZH macro in units.h.

    - Fix wrong indentation in SPDX-License line.

2. Fix reference count leak in exynos-ppmu.c by using of_node_put().

3. Rework freq_table to be local to devfreq struct

    - struct devfreq_dev_profile includes freq_table array to store
      the supported frequencies. If devfreq driver doesn't initialize
      the freq_table, devfreq core allocates the memory and initializes
      the freq_table.

      On a devfreq PROBE_DEFER, the freq_table in the driver profile
      struct is never reset and may be left in an undefined state. To fix
      this and correctly handle PROBE_DEFER, use a local freq_table and
      max_state in the devfreq struct."

* tag 'devfreq-fixes-for-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux:
  PM / devfreq: passive: revert an editing accident in SPDX-License line
  PM / devfreq: Fix kernel warning with cpufreq passive register fail
  PM / devfreq: Rework freq_table to be local to devfreq struct
  PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
  PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
  PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
  PM / devfreq: Mute warning on governor PROBE_DEFER
  PM / devfreq: Fix kernel panic with cpu based scaling to passive gov

io_uring: keep sendrecv flags in ioprio

We waste a u64 SQE field for flags even though we don't need as many
bits and it can be used for something more useful later. Store io_uring
specific send/recv flags in sqe->ioprio instead of ->addr2.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Fixes: 0455d4ccec54 ("io_uring: add POLL_FIRST support for send/sendmsg and recv/recvmsg")
[axboe: change comment in io_uring.h as well]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

s390/purgatory: remove duplicated build rule of kexec-purgatory.o

This is equivalent to the pattern rule in scripts/Makefile.build.

Having the dependency on $(obj)/purgatory.ro is enough.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-3-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390/purgatory: hard-code obj-y in Makefile

The purgatory/ directory is entirely guarded in arch/s390/Kbuild.
CONFIG_ARCH_HAS_KEXEC_PURGATORY is bool type.

$(CONFIG_ARCH_HAS_KEXEC_PURGATORY) is always 'y' when Kbuild visits
this Makefile for building.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-2-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

s390: remove unneeded 'select BUILD_BIN2C'

Since commit 4c0f032d4963 ("s390/purgatory: Omit use of bin2c"),
s390 builds the purgatory without using bin2c.

Remove 'select BUILD_BIN2C' to avoid the unneeded build of bin2c.

Fixes: 4c0f032d4963 ("s390/purgatory: Omit use of bin2c")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20220613170902.1775211-1-masahiroy@kernel.org
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>

net: sfp: fix memory leak in sfp_probe()

sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When
devm_add_action() fails, sfp is not freed, which leads to a memory leak.

We should use devm_add_action_or_reset() instead of devm_add_action().

Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

mlxsw: spectrum_router: Fix rollback in tunnel next hop init

In mlxsw_sp_nexthop6_init(), a next hop is always added to the router
linked list, and mlxsw_sp_nexthop_type_init() is invoked afterwards. When
that function results in an error, the next hop will not have been removed
from the linked list. As the error is propagated upwards and the caller
frees the next hop object, the linked list ends up holding an invalid
object.

A similar issue comes up with mlxsw_sp_nexthop4_init(), where rollback
block does exist, however does not include the linked list removal.

Both IPv6 and IPv4 next hops have a similar issue with next-hop counter
rollbacks. As these were introduced in the same patchset as the next hop
linked list, include the cleanup in this patch.

Fixes: dbe4598c1e92 ("mlxsw: spectrum_router: Keep nexthops in a linked list")
Fixes: a5390278a5eb ("mlxsw: spectrum: Add support for setting counters on nexthops")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220629070205.803952-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: rose: fix UAF bugs caused by timer handler

There are UAF bugs in rose_heartbeat_expiry(), rose_timer_expiry()
and rose_idletimer_expiry(). The root cause is that del_timer()
could not stop the timer handler that is running and the refcount
of sock is not managed properly.

One of the UAF bugs is shown below:

    (thread 1)          |        (thread 2)
                        |  rose_bind
                        |  rose_connect
                        |    rose_start_heartbeat
rose_release            |    (wait a time)
  case ROSE_STATE_0     |
  rose_destroy_socket   |  rose_heartbeat_expiry
    rose_stop_heartbeat |
    sock_put(sk)        |    ...
  sock_put(sk) // FREE  |
                        |    bh_lock_sock(sk) // USE

The sock is deallocated by sock_put() in rose_release() and
then used by bh_lock_sock() in rose_heartbeat_expiry().

Although rose_destroy_socket() calls rose_stop_heartbeat(),
it could not stop the timer that is running.

The KASAN report triggered by POC is shown below:

BUG: KASAN: use-after-free in _raw_spin_lock+0x5a/0x110
Write of size 4 at addr ffff88800ae59098 by task swapper/3/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0xbf/0xee
print_address_description+0x7b/0x440
print_report+0x101/0x230
? irq_work_single+0xbb/0x140
? _raw_spin_lock+0x5a/0x110
kasan_report+0xed/0x120
? _raw_spin_lock+0x5a/0x110
kasan_check_range+0x2bd/0x2e0
_raw_spin_lock+0x5a/0x110
rose_heartbeat_expiry+0x39/0x370
? rose_start_heartbeat+0xb0/0xb0
call_timer_fn+0x2d/0x1c0
? rose_start_heartbeat+0xb0/0xb0
expire_timers+0x1f3/0x320
__run_timers+0x3ff/0x4d0
run_timer_softirq+0x41/0x80
__do_softirq+0x233/0x544
irq_exit_rcu+0x41/0xa0
sysvec_apic_timer_interrupt+0x8c/0xb0
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x1b/0x20
RIP: 0010:default_idle+0xb/0x10
RSP: 0018:ffffc9000012fea0 EFLAGS: 00000202
RAX: 000000000000bcae RBX: ffff888006660f00 RCX: 000000000000bcae
RDX: 0000000000000001 RSI: ffffffff843a11c0 RDI: ffffffff843a1180
RBP: dffffc0000000000 R08: dffffc0000000000 R09: ffffed100da36d46
R10: dfffe9100da36d47 R11: ffffffff83cf0950 R12: 0000000000000000
R13: 1ffff11000ccc1e0 R14: ffffffff8542af28 R15: dffffc0000000000
...
Allocated by task 146:
__kasan_kmalloc+0xc4/0xf0
sk_prot_alloc+0xdd/0x1a0
sk_alloc+0x2d/0x4e0
rose_create+0x7b/0x330
__sock_create+0x2dd/0x640
__sys_socket+0xc7/0x270
__x64_sys_socket+0x71/0x80
do_syscall_64+0x43/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Freed by task 152:
kasan_set_track+0x4c/0x70
kasan_set_free_info+0x1f/0x40
____kasan_slab_free+0x124/0x190
kfree+0xd3/0x270
__sk_destruct+0x314/0x460
rose_release+0x2fa/0x3b0
sock_close+0xcb/0x230
__fput+0x2d9/0x650
task_work_run+0xd6/0x160
exit_to_user_mode_loop+0xc7/0xd0
exit_to_user_mode_prepare+0x4e/0x80
syscall_exit_to_user_mode+0x20/0x40
do_syscall_64+0x4f/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0

This patch adds refcount of sock when we use functions
such as rose_start_heartbeat() and so on to start timer,
and decreases the refcount of sock when timer is finished
or deleted by functions such as rose_stop_heartbeat()
and so on. As a result, the UAF bugs could be mitigated.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Tested-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220629002640.5693-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

net: usb: ax88179_178a: Fix packet receiving

This patch corrects packet receiving in ax88179_rx_fixup.

- problem observed:
  ifconfig shows allways a lot of 'RX Errors' while packets
  are received normally.

  This occurs because ax88179_rx_fixup does not recognise properly
  the usb urb received.
  The packets are normally processed and at the end, the code exits
  with 'return 0', generating RX Errors.
  (pkt_cnt==-2 and ptk_hdr over field rx_hdr trying to identify
   another packet there)

  This is a usb urb received by "tcpdump -i usbmon2 -X" on a
  little-endian CPU:
  0x0000:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
           ^         packet 1 start (pkt_len = 0x05ec)
           ^^^^      IP alignment pseudo header
                ^    ethernet packet start
           last byte ethernet packet   v
           padding (8-bytes aligned)     vvvv vvvv
  0x05e0:  c92d d444 1420 8a69 83dd 272f e82b 9811
  0x05f0:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...      ^ packet 2
  0x0be0:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...
  0x1130:  9d41 9171 8a38 0ec5 eeee f8e3 3b19 87a0
  ...
  0x1720:  8cfc 15ff 5e4c e85c eeee f8e3 3b19 87a0
  ...
  0x1d10:  ecfa 2a3a 19ab c78c eeee f8e3 3b19 87a0
  ...
  0x2070:  eeee f8e3 3b19 87a0 94de 80e3 daac 0800
  ...      ^ packet 7
  0x2120:  7c88 4ca5 5c57 7dcc 0d34 7577 f778 7e0a
  0x2130:  f032 e093 7489 0740 3008 ec05 0000 0080
                               ====1==== ====2====
           hdr_off             ^
           pkt_len = 0x05ec         ^^^^
           AX_RXHDR_*=0x00830  ^^^^   ^
           pkt_len = 0                        ^^^^
           AX_RXHDR_DROP_ERR=0x80000000  ^^^^   ^
  0x2140:  3008 ec05 0000 0080 3008 5805 0000 0080
  0x2150:  3008 ec05 0000 0080 3008 ec05 0000 0080
  0x2160:  3008 5803 0000 0080 3008 c800 0000 0080
           ===11==== ===12==== ===13==== ===14====
  0x2170:  0000 0000 0e00 3821
                     ^^^^ ^^^^ rx_hdr
                     ^^^^      pkt_cnt=14
                          ^^^^ hdr_off=0x2138
           ^^^^ ^^^^           padding

  The dump shows that pkt_cnt is the number of entrys in the
  per-packet metadata. It is "2 * packet count".
  Each packet have two entrys. The first have a valid
  value (pkt_len and AX_RXHDR_*) and the second have a
  dummy-header 0x80000000 (pkt_len=0 with AX_RXHDR_DROP_ERR).
  Why exists dummy-header for each packet?!?
  My guess is that this was done probably to align the
  entry for each packet to 64-bits and maintain compatibility
  with old firmware.
  There is also a padding (0x00000000) before the rx_hdr to
  align the end of rx_hdr to 64-bit.
  Note that packets have a alignment of 64-bits (8-bytes).

  This patch assumes that the dummy-header and the last
  padding are optional. So it preserves semantics and
  recognises the same valid packets as the current code.

  This patch was made using only the dumpfile information and
  tested with only one device:
  0b95:1790 ASIX Electronics Corp. AX88179 Gigabit Ethernet

Fixes: 57bc3d3ae8c1 ("net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup")
Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/d6970bb04bf67598af4d316eaeb1792040b18cfd.camel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>

nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA IM2P33F8ABR1

ADATA IM2P33F8ABR1 reports bogus eui64 values that appear to be the same
across all drives. Quirk them out so they are not marked as "non globally
unique" duplicates.

Co-developed-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Felipe de Jesus Araujo da Conceição <felipe.conceicao@petrosoftdesign.com>
Signed-off-by: Lamarque V. Souza <lamarque.souza@petrosoftdesign.com>
Cc: stable@vger.kernel.org
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet: add a clear_ids attribute for passthru targets

If the clear_ids attribute is set to true, the EUI/GUID/UUID is cleared
for the passthru target. By default, loop targets will set clear_ids to
true.

This resolves an issue where a connect to a passthru target fails when
using a trtype of 'loop' because EUI/GUID/UUID is not unique.

Fixes: 2079f41ec6ff ("nvme: check that EUI/GUID/UUID are globally unique")
Signed-off-by: Alan Adamson <alan.adamson@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

net: bonding: fix use-after-free after 802.3ad slave unbind

commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"),
resolve case, when there is several aggregation groups in the same bond.
bond_3ad_unbind_slave will invalidate (clear) aggregator when
__agg_active_ports return zero. So, ad_clear_agg can be executed even, when
num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for,
previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave
will not update slave ports list, because lag_ports==NULL. So, here we
got slave ports, pointing to freed aggregator memory.

Fix with checking actual number of ports in group (as was before
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ),
before ad_clear_agg().

The KASAN logs are as follows:

[  767.617392] ==================================================================
[  767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470
[  767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767
[  767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G           O 5.15.11 #15
[  767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT)
[  767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler
[  767.666468] Call trace:
[  767.668930]  dump_backtrace+0x0/0x2d0
[  767.672625]  show_stack+0x24/0x30
[  767.675965]  dump_stack_lvl+0x68/0x84
[  767.679659]  print_address_description.constprop.0+0x74/0x2b8
[  767.685451]  kasan_report+0x1f0/0x260
[  767.689148]  __asan_load2+0x94/0xd0
[  767.692667]  bond_3ad_state_machine_handler+0x13dc/0x1470

Fixes: 0622cab0341c ("bonding: fix 802.3ad aggregator reselection")
Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu>
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ipv6: fix lockdep splat in in6_dump_addrs()

As reported by syzbot, we should not use rcu_dereference()
when rcu_read_lock() is not held.

WARNING: suspicious RCU usage
5.19.0-rc2-syzkaller #0 Not tainted

net/ipv6/addrconf.c:5175 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz-executor326/3617:
#0: ffffffff8d5848e8 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xae/0xc20 net/netlink/af_netlink.c:2223

stack backtrace:
CPU: 0 PID: 3617 Comm: syz-executor326 Not tainted 5.19.0-rc2-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
in6_dump_addrs+0x12d1/0x1790 net/ipv6/addrconf.c:5175
inet6_dump_addr+0x9c1/0xb50 net/ipv6/addrconf.c:5300
netlink_dump+0x541/0xc20 net/netlink/af_netlink.c:2275
__netlink_dump_start+0x647/0x900 net/netlink/af_netlink.c:2380
netlink_dump_start include/linux/netlink.h:245 [inline]
rtnetlink_rcv_msg+0x73e/0xc90 net/core/rtnetlink.c:6046
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:734
____sys_sendmsg+0x6eb/0x810 net/socket.c:2492
___sys_sendmsg+0xf3/0x170 net/socket.c:2546
__sys_sendmsg net/socket.c:2575 [inline]
__do_sys_sendmsg net/socket.c:2584 [inline]
__se_sys_sendmsg net/socket.c:2582 [inline]
__x64_sys_sendmsg+0x132/0x220 net/socket.c:2582
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: 88e2ca308094 ("mld: convert ifmcaddr6 to RCU")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20220628121248.858695-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: ax88772a: fix lost pause advertisement configuration

In case of asix_ax88772a_link_change_notify() workaround, we run soft
reset which will automatically clear MII_ADVERTISE configuration. The
PHYlib framework do not know about changed configuration state of the
PHY, so we need use phy_init_hw() to reinit PHY configuration.

Fixes: dde258469257 ("net: usb/phy: asix: add support for ax88772A/C PHYs")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220628114349.3929928-1-o.rempel@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

net: phy: Don't trigger state machine while in suspend

Upon system sleep, mdio_bus_phy_suspend() stops the phy_state_machine(),
but subsequent interrupts may retrigger it:

They may have been left enabled to facilitate wakeup and are not
quiesced until the ->suspend_noirq() phase.  Unwanted interrupts may
hence occur between mdio_bus_phy_suspend() and dpm_suspend_noirq(),
as well as between dpm_resume_noirq() and mdio_bus_phy_resume().

Retriggering the phy_state_machine() through an interrupt is not only
undesirable for the reason given in mdio_bus_phy_suspend() (freezing it
midway with phydev->lock held), but also because the PHY may be
inaccessible after it's suspended:  Accesses to USB-attached PHYs are
blocked once usb_suspend_both() clears the can_submit flag and PHYs on
PCI network cards may become inaccessible upon suspend as well.

Amend phy_interrupt() to avoid triggering the state machine if the PHY
is suspended.  Signal wakeup instead if the attached net_device or its
parent has been configured as a wakeup source.  (Those conditions are
identical to mdio_bus_phy_may_suspend().)  Postpone handling of the
interrupt until the PHY has resumed.

Before stopping the phy_state_machine() in mdio_bus_phy_suspend(),
wait for a concurrent phy_interrupt() to run to completion.  That is
necessary because phy_interrupt() may have checked the PHY's suspend
status before the system sleep transition commenced and it may thus
retrigger the state machine after it was stopped.

Likewise, after re-enabling interrupt handling in mdio_bus_phy_resume(),
wait for a concurrent phy_interrupt() to complete to ensure that
interrupts which it postponed are properly rerun.

The issue was exposed by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward
PHY interrupts to PHY driver to avoid polling"), but has existed since
forever.

Fixes: 541cd3ee00a4 ("phylib: Fix deadlock on resume")
Link: https://lore.kernel.org/netdev/a5315a8a-32c2-962f-f696-de9a26d30091@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: stable@vger.kernel.org # v2.6.33+
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b7f386d04e9b5b0e2738f0125743e30676f309ef.1656410895.git.lukas@wunner.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

usbnet: fix memory allocation in helpers

usbnet provides some helper functions that are also used in
the context of reset() operations. During a reset the other
drivers on a device are unable to operate. As that can be block
drivers, a driver for another interface cannot use paging
in its memory allocations without risking a deadlock.
Use GFP_NOIO in the helpers.

Fixes: 877bd862f32b8 ("usbnet: introduce usbnet 3 command helpers")
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220628093517.7469-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

selftests net: fix kselftest net fatal error

The incorrect path is causing the following error when trying to run net
kselftests:

In file included from bpf/nat6to4.c:43:
../../../lib/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
^~~~~~~~~~~~~~~~~~~
1 error generated.

Fixes: cf67838c4422 ("selftests net: fix bpf build error")
Signed-off-by: Coleman Dietsch <dietschc@csp.edu>
Link: https://lore.kernel.org/r/20220628174744.7908-1-dietschc@csp.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge git://git./linux/kernel/git/netfilter/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Restore set counter when one of the CPU loses race to add elements
   to sets.

2) After NF_STOLEN, skb might be there no more, update nftables trace
   infra to avoid access to skb in this case. From Florian Westphal.

3) nftables bridge might register a prerouting hook with zero priority,
   br_netfilter incorrectly skips it. Also from Florian.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: br_netfilter: do not skip all hooks with 0 priority
  netfilter: nf_tables: avoid skb access on nf_stolen
  netfilter: nft_dynset: restore set element counter when failing to update
====================

Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'amd-drm-fixes-5.19-2022-06-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.19-2022-06-29:

amdgpu:
- GPU recovery fix
- Fix integer type usage in fourcc header for AMD modifiers
- KFD TLB flush fix for gfx9 APUs
- Display fix

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220629192220.5870-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2022-06-29' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.19-rc5:
- Fix ioctl argument error return
- Fix d3cold disable to allow PCI upstream bridge D3 transition
- Fix setting cache_dirty for dma-buf objects on discrete

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/871qv7rblv.fsf@intel.com

dm raid: fix KASAN warning in raid5_add_disks

There's a KASAN warning in raid5_add_disk when running the LVM testsuite.
The warning happens in the test
lvconvert-raid-reshape-linear_to_raid6-single-type.sh. We fix the warning
by verifying that rdev->saved_raid_disk is within limits.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

dm raid: fix KASAN warning in raid5_remove_disk

There's a KASAN warning in raid5_remove_disk when running the LVM
testsuite. We fix this warning by verifying that the "number" variable is
within limits.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@kernel.org>

ata: pata_cs5535: Fix W=1 warnings

x86_64 allmodconfig build with W=1 gives these warnings:

drivers/ata/pata_cs5535.c: In function ‘cs5535_set_piomode’:
drivers/ata/pata_cs5535.c:93:11: error: variable ‘dummy’ set but not
used [-Werror=unused-but-set-variable]
  u32 reg, dummy;
           ^~~~~
drivers/ata/pata_cs5535.c: In function ‘cs5535_set_dmamode’:
drivers/ata/pata_cs5535.c:132:11: error: variable ‘dummy’ set but not
used [-Werror=unused-but-set-variable]
  u32 reg, dummy;
           ^~~~~
cc1: all warnings being treated as errors

Mark variables 'dummy' as "maybe unused" as they are only ever written
in rdmsr() calls.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

hwmon: (pmbus/ucd9200) fix typos in comments

Drop the redundant word 'the' in the comments following
    /*
     * Set PHASE registers on all pages to 0xff to ensure that phase
     * specific commands will apply to all phases of a given page (rail).
     * This only affects the READ_IOUT and READ_TEMPERATURE2 registers.
     * READ_IOUT will return the sum of currents of all phases of a rail,
     * and READ_TEMPERATURE2 will return the maximum temperature detected
     * for the [the - DROP] phases of the rail.
     */

Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Link: https://lore.kernel.org/r/20220622063231.20612-1-jiangjian@cdjrlc.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

hwmon: (occ) Prevent power cap command overwriting poll response

Currently, the response to the power cap command overwrites the
first eight bytes of the poll response, since the commands use
the same buffer. This means that user's get the wrong data between
the time of sending the power cap and the next poll response update.
Fix this by specifying a different buffer for the power cap command
response.

Fixes: 5b5513b88002 ("hwmon: Add On-Chip Controller (OCC) hwmon driver")
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20220628203029.51747-1-eajames@linux.ibm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

PM / devfreq: passive: revert an editing accident in SPDX-License line

Commit 26984d9d581e ("PM / devfreq: passive: Keep cpufreq_policy for
possible cpus") reworked governor_passive.c, and accidently added a
tab in the first line, i.e., the SPDX-License-Identifier line.

The checkpatch script warns with the SPDX_LICENSE_TAG warning, and hence
pointed this issue out while investigating checkpatch warnings.

Revert this editing accident. No functional change.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: Fix kernel warning with cpufreq passive register fail

Remove cpufreq_passive_unregister_notifier from
cpufreq_passive_register_notifier in case of error as devfreq core
already call unregister on GOV_START fail.

This fix the kernel always printing a WARN on governor PROBE_DEFER as
cpufreq_passive_unregister_notifier is called two times and return
error on the second call as the cpufreq is already unregistered.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: Rework freq_table to be local to devfreq struct

On a devfreq PROBE_DEFER, the freq_table in the driver profile struct,
is never reset and may be leaved in an undefined state.

This comes from the fact that we store the freq_table in the driver
profile struct that is commonly defined as static and not reset on
PROBE_DEFER.
We currently skip the reinit of the freq_table if we found
it's already defined since a driver may declare his own freq_table.

This logic is flawed in the case devfreq core generate a freq_table, set
it in the profile struct and then PROBE_DEFER, freeing the freq_table.
In this case devfreq will found a NOT NULL freq_table that has been
freed, skip the freq_table generation and probe the driver based on the
wrong table.

To fix this and correctly handle PROBE_DEFER, use a local freq_table and
max_state in the devfreq struct and never modify the freq_table present
in the profile struct if it does provide it.

Fixes: 0ec09ac2cebe ("PM / devfreq: Set the freq_table of devfreq device")
Cc: stable@vger.kernel.org
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when done.
This function only calls of_node_put() in normal path,
missing it in error paths.
Add missing of_node_put() to avoid refcount leak.

Fixes: f262f28c1470 ("PM / devfreq: event: Add devfreq_event class")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h

HZ macros has been centralized in units.h since [1]. Use it to avoid
duplicated definition.

[1] commit e2c77032fcbe ("units: add the HZ macros")

Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER

With the passive governor, the cpu based scaling can PROBE_DEFER due to
the fact that CPU policy are not ready.
The cpufreq passive unregister notifier is called both from the
GOV_START errors and for the GOV_STOP and assume the notifier is
successfully registred every time. With GOV_START failing it's wrong to
loop over each possible CPU since the register path has failed for
some CPU policy not ready. Change the logic and unregister the notifer
based on the current allocated parent_cpu_data list to correctly handle
errors and the governor unregister path.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: Mute warning on governor PROBE_DEFER

Don't print warning when a governor PROBE_DEFER as it's not a real
GOV_START fail.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

PM / devfreq: Fix kernel panic with cpu based scaling to passive gov

The cpufreq passive register notifier can PROBE_DEFER and the devfreq
struct is freed and then reallocaed on probe retry.
The current logic assume that the code can't PROBE_DEFER so the devfreq
struct in the this variable in devfreq_passive_data is assumed to be
(if already set) always correct.
This cause kernel panic as the code try to access the wrong address.
To correctly handle this, update the this variable in
devfreq_passive_data to the devfreq reallocated struct.

Fixes: a03dacb0316f ("PM / devfreq: Add cpu based scaling support to passive governor")
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Revert "drm/amdgpu/display: set vblank_disable_immediate for DC"

This reverts commit 92020e81ddbeac351ea4a19bcf01743f32b9c800.

This causes stuttering and timeouts with DMCUB for some users
so revert it until we understand why and safely enable it
to save power.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1887
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Cc: stable@vger.kernel.org

drm/amdgpu: To flush tlb for MMHUB of RAVEN series

amdgpu: [mmhub0] no-retry page fault (src_id:0 ring:40 vmid:8 pasid:32769, for process test_basic pid 3305 thread test_basic pid 3305)
amdgpu: in page starting at address 0x00007ff990003000 from IH client 0x12 (VMC)
amdgpu: VM_L2_PROTECTION_FAULT_STATUS:0x00840051
amdgpu: Faulty UTCL2 client ID: MP1 (0x0)
amdgpu: MORE_FAULTS: 0x1
amdgpu: WALKER_ERROR: 0x0
amdgpu: PERMISSION_FAULTS: 0x5
amdgpu: MAPPING_ERROR: 0x0
amdgpu: RW: 0x1

When memory is allocated by kfd, no one triggers the tlb flush for MMHUB0.
There is page fault from MMHUB0.

v2:fix indentation
v3:change subject and fix indentation

Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/fourcc: fix integer type usage in uapi header

Kernel uapi headers are supposed to use __[us]{8,16,32,64} types defined
by <linux/types.h> as opposed to 'uint32_t' and similar. See [1] for the
relevant discussion about this topic. In this particular case, the usage
of 'uint64_t' escaped headers_check as these macros are not being called
here. However, the following program triggers a compilation error:

  #include <drm/drm_fourcc.h>

  int main()
  {
   unsigned long x = AMD_FMT_MOD_CLEAR(RB);
   return 0;
  }

gcc error:
  drm.c:5:27: error: ‘uint64_t’ undeclared (first use in this function)
      5 |         unsigned long x = AMD_FMT_MOD_CLEAR(RB);
        |                           ^~~~~~~~~~~~~~~~~

This patch changes AMD_FMT_MOD_{SET,CLEAR} macros to use the correct
integer types, which fixes the above issue.

  [1] https://lkml.org/lkml/2019/6/5/18

Fixes: 8ba16d599374 ("drm/fourcc: Add AMD DRM modifiers.")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix adev variable used in amdgpu_device_gpu_recover()

Use the correct adev variable for the drm_fb_helper in
amdgpu_device_gpu_recover(). Noticed by inspection.

Fixes: 087451f372bf ("drm/amdgpu: use generic fb helpers instead of setting up AMD own's.")
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Merge tag 'platform-drivers-x86-v5.19-3' of git://git./linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

- thinkpad_acpi/ideapad-laptop: mem-leak and platform-profile fixes

- panasonic-laptop: missing hotkey presses regression fix

- some hardware-id additions

- some other small fixes

* tag 'platform-drivers-x86-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: hp-wmi: Ignore Sanitization Mode event
  platform/x86: thinkpad_acpi: do not use PSC mode on Intel platforms
  platform/x86: thinkpad-acpi: profile capabilities as integer
  platform/x86: panasonic-laptop: filter out duplicate volume up/down/mute keypresses
  platform/x86: panasonic-laptop: don't report duplicate brightness key-presses
  platform/x86: panasonic-laptop: revert "Resolve hotkey double trigger bug"
  platform/x86: panasonic-laptop: sort includes alphabetically
  platform/x86: panasonic-laptop: de-obfuscate button codes
  ACPI: video: Change how we determine if brightness key-presses are handled
  platform/x86: ideapad-laptop: Add Ideapad 5 15ITL05 to ideapad_dytc_v4_allow_table[]
  platform/x86: ideapad-laptop: Add allow_v4_dytc module parameter
  platform/x86: thinkpad_acpi: Fix a memory leak of EFCH MMIO resource
  platform/mellanox: nvsw-sn2201: fix error code in nvsw_sn2201_create_static_devices()
  platform/x86: intel/pmc: Add Alder Lake N support to PMC core driver

Merge tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd

Pull ksmbd server fixes from Steve French:

- seek null check (don't use f_seek op directly and blindly)

- offset validation in FSCTL_SET_ZERO_DATA

- fallocate fix (relates e.g. to xfstests generic/091 and 263)

- two cleanup fixes

- fix socket settings on some arch

* tag '5.19-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: use vfs_llseek instead of dereferencing NULL
  ksmbd: check invalid FileOffset and BeyondFinalZero in FSCTL_ZERO_DATA
  ksmbd: set the range of bytes to zero without extending file size in FSCTL_ZERO_DATA
  ksmbd: remove duplicate flag set in smb2_write
  ksmbd: smbd: Remove useless license text when SPDX-License-Identifier is already used
  ksmbd: use SOCK_NONBLOCK type for kernel_accept()

ceph: wait on async create before checking caps for syncfs

Currently, we'll call ceph_check_caps, but if we're still waiting
on the reply, we'll end up spinning around on the same inode in
flush_dirty_session_caps. Wait for the async create reply before
flushing caps.

Cc: stable@vger.kernel.org
URL: https://tracker.ceph.com/issues/55823
Fixes: fbed7045f552 ("ceph: wait for async create reply before sending any cap messages")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

xfs: dont treat rt extents beyond EOF as eofblocks to be cleared

On a system with a realtime volume and a 28k realtime extent,
generic/491 fails because the test opens a file on a frozen filesystem
and closing it causes xfs_release -> xfs_can_free_eofblocks to
mistakenly think that the the blocks of the realtime extent beyond EOF
are posteof blocks to be freed. Realtime extents cannot be partially
unmapped, so this is pointless. Worse yet, this triggers posteof
cleanup, which stalls on a transaction allocation, which is why the test
fails.

Teach the predicate to account for realtime extents properly.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>

xfs: don't hold xattr leaf buffers across transaction rolls

Now that we've established (again!) that empty xattr leaf buffers are
ok, we no longer need to bhold them to transactions when we're creating
new leaf blocks. Get rid of the entire mechanism, which should simplify
the xattr code quite a bit.

The original justification for using bhold here was to prevent the AIL
from trying to write the empty leaf block into the fs during the brief
time that we release the buffer lock. The reason for /that/ was to
prevent recovery from tripping over the empty ondisk block.

Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>

xfs: empty xattr leaf header blocks are not corruption

TLDR: Revert commit 51e6104fdb95 ("xfs: detect empty attr leaf blocks in
xfs_attr3_leaf_verify") because it was wrong.

Every now and then we get a corruption report from the kernel or
xfs_repair about empty leaf blocks in the extended attribute structure.
We've long thought that these shouldn't be possible, but prior to 5.18
one would shake loose in the recoveryloop fstests about once a month.

A new addition to the xattr leaf block verifier in 5.19-rc1 makes this
happen every 7 minutes on my testing cloud.  I added a ton of logging to
detect any time we set the header count on an xattr leaf block to zero.
This produced the following dmesg output on generic/388:

XFS (sda4): ino 0x21fcbaf leaf 0x129bf78 hdcount==0!
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
xfs_attr3_leaf_create+0x187/0x230
xfs_attr_shortform_to_leaf+0xd1/0x2f0
xfs_attr_set_iter+0x73e/0xa90
xfs_xattri_finish_update+0x45/0x80
xfs_attr_finish_item+0x1b/0xd0
xfs_defer_finish_noroll+0x19c/0x770
__xfs_trans_commit+0x153/0x3e0
xfs_attr_set+0x36b/0x740
xfs_xattr_set+0x89/0xd0
__vfs_setxattr+0x67/0x80
__vfs_setxattr_noperm+0x6e/0x120
vfs_setxattr+0x97/0x180
setxattr+0x88/0xa0
path_setxattr+0xc3/0xe0
__x64_sys_setxattr+0x27/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0

So now we know that someone is creating empty xattr leaf blocks as part
of converting a sf xattr structure into a leaf xattr structure.  The
conversion routine logs any existing sf attributes in the same
transaction that creates the leaf block, so we know this is a setxattr
to a file that has no attributes at all.

Next, g/388 calls the shutdown ioctl and cycles the mount to trigger log
recovery.  I also augmented buffer item recovery to call ->verify_struct
on any attr leaf blocks and complain if it finds a failure:

XFS (sda4): Unmounting Filesystem
XFS (sda4): Mounting V5 Filesystem
XFS (sda4): Starting recovery (logdev: internal)
XFS (sda4): xattr leaf daddr 0x129bf78 hdrcount == 0!
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
xfs_attr3_leaf_verify+0x3b8/0x420
xlog_recover_buf_commit_pass2+0x60a/0x6c0
xlog_recover_items_pass2+0x4e/0xc0
xlog_recover_commit_trans+0x33c/0x350
xlog_recovery_process_trans+0xa5/0xe0
xlog_recover_process_data+0x8d/0x140
xlog_do_recovery_pass+0x19b/0x720
xlog_do_log_recovery+0x62/0xc0
xlog_do_recover+0x33/0x1d0
xlog_recover+0xda/0x190
xfs_log_mount+0x14c/0x360
xfs_mountfs+0x517/0xa60
xfs_fs_fill_super+0x6bc/0x950
get_tree_bdev+0x175/0x280
vfs_get_tree+0x1a/0x80
path_mount+0x6f5/0xaa0
__x64_sys_mount+0x103/0x140
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
RIP: 0033:0x7fc61e241eae

And a moment later, the _delwri_submit of the recovered buffers trips
the same verifier and recovery fails:

XFS (sda4): Metadata corruption detected at xfs_attr3_leaf_verify+0x393/0x420 [xfs], xfs_attr3_leaf block 0x129bf78
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 00 00 00 00 00 00 00 00 3b ee 00 00 00 00 00 00  ........;.......
00000010: 00 00 00 00 01 29 bf 78 00 00 00 00 00 00 00 00  .....).x........
00000020: a5 1b d0 02 b2 9a 49 df 8e 9c fb 8d f8 31 3e 9d  ......I......1>.
00000030: 00 00 00 00 02 1f cb af 00 00 00 00 10 00 00 00  ................
00000040: 00 50 0f b0 00 00 00 00 00 00 00 00 00 00 00 00  .P..............
00000050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
00000060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
00000070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
XFS (sda4): Corruption of in-memory data (0x8) detected at _xfs_buf_ioapply+0x37f/0x3b0 [xfs] (fs/xfs/xfs_buf.c:1518).  Shutting down filesystem.
XFS (sda4): Please unmount the filesystem and rectify the problem(s)
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed

I think I see what's going on here -- setxattr is racing with something
that shuts down the filesystem:

Thread 1 Thread 2
-------- --------
xfs_attr_sf_addname
xfs_attr_shortform_to_leaf
<create empty leaf>
xfs_trans_bhold(leaf)
xattri_dela_state = XFS_DAS_LEAF_ADD
<roll transaction>
<flush log>
<shut down filesystem>
xfs_trans_bhold_release(leaf)
<discover fs is dead, bail>

Thread 3
--------
<cycle mount, start recovery>
xlog_recover_buf_commit_pass2
xlog_recover_do_reg_buffer
<replay empty leaf buffer from recovered buf item>
xfs_buf_delwri_queue(leaf)
xfs_buf_delwri_submit
_xfs_buf_ioapply(leaf)
xfs_attr3_leaf_write_verify
<trip over empty leaf buffer>
<fail recovery>

As you can see, the bhold keeps the leaf buffer locked and thus prevents
the *AIL* from tripping over the ichdr.count==0 check in the write
verifier.  Unfortunately, it doesn't prevent the log from getting
flushed to disk, which sets up log recovery to fail.

So.  It's clear that the kernel has always had the ability to persist
attr leaf blocks with ichdr.count==0, which means that it's part of the
ondisk format now.

Unfortunately, this check has been added and removed multiple times
throughout history.  It first appeared in[1] kernel 3.10 as part of the
early V5 format patches.  The check was later discovered to break log
recovery and hence disabled[2] during log recovery in kernel 4.10.
Simultaneously, the check was added[3] to xfs_repair 4.9.0 to try to
weed out the empty leaf blocks.  This was still not correct because log
recovery would recover an empty attr leaf block successfully only for
regular xattr operations to trip over the empty block during of the
block during regular operation.  Therefore, the check was removed
entirely[4] in kernel 5.7 but removal of the xfs_repair check was
forgotten.  The continued complaints from xfs_repair lead to us
mistakenly re-adding[5] the verifier check for kernel 5.19.  Remove it
once again.

[1] 517c22207b04 ("xfs: add CRCs to attr leaf blocks")
[2] 2e1d23370e75 ("xfs: ignore leaf attr ichdr.count in verifier
                   during log replay")
[3] f7140161 ("xfs_repair: junk leaf attribute if count == 0")
[4] f28cef9e4dac ("xfs: don't fail verifier on empty attr3 leaf
                   block")
[5] 51e6104fdb95 ("xfs: detect empty attr leaf blocks in
                   xfs_attr3_leaf_verify")

Looking at the rest of the xattr code, it seems that files with empty
leaf blocks behave as expected -- listxattr reports no attributes;
getxattr on any xattr returns nothing as expected; removexattr does
nothing; and setxattr can add attributes just fine.

Original-bug: 517c22207b04 ("xfs: add CRCs to attr leaf blocks")
Still-not-fixed-by: 2e1d23370e75 ("xfs: ignore leaf attr ichdr.count in verifier during log replay")
Removed-in: f28cef9e4dac ("xfs: don't fail verifier on empty attr3 leaf block")
Fixes: 51e6104fdb95 ("xfs: detect empty attr leaf blocks in xfs_attr3_leaf_verify")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>

nvme: fix regression when disconnect a recovering ctrl

We encountered a problem that the disconnect command hangs.
After analyzing the log and stack, we found that the triggering
process is as follows:
CPU0                          CPU1
                                nvme_rdma_error_recovery_work
                                  nvme_rdma_teardown_io_queues
nvme_do_delete_ctrl                 nvme_stop_queues
  nvme_remove_namespaces
  --clear ctrl->namespaces
                                    nvme_start_queues
                                    --no ns in ctrl->namespaces
    nvme_ns_remove                  return(because ctrl is deleting)
      blk_freeze_queue
        blk_mq_freeze_queue_wait
        --wait for ns to unquiesce to clean infligt IO, hang forever

This problem was not found in older kernels because we will flush
err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not
seem to be modified for functional reasons, the patch can be revert
to solve the problem.

Revert commit 794a4cb3d2f7 ("nvme: remove the .stop_ctrl callout")

Signed-off-by: Ruozhu Li <liruozhu@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-pci: add NVME_QUIRK_BOGUS_NID for ADATA XPG SX6000LNP (AKA SPECTRIX S40G)

ADATA XPG SPECTRIX S40G drives report bogus eui64 values that appear to
be the same across drives in one system. Quirk them out so they are
not marked as "non globally unique" duplicates.

Before:
[    2.258919] nvme nvme1: pci function 0000:06:00.0
[    2.264898] nvme nvme2: pci function 0000:05:00.0
[    2.323235] nvme nvme1: failed to set APST feature (2)
[    2.326153] nvme nvme2: failed to set APST feature (2)
[    2.333935] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.336492] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.339611] nvme nvme1: 7/0/0 default/read/poll queues
[    2.341805] nvme nvme2: 7/0/0 default/read/poll queues
[    2.346114]  nvme1n1: p1
[    2.347197] nvme nvme2: globally duplicate IDs for nsid 1
After:
[    2.427715] nvme nvme1: pci function 0000:06:00.0
[    2.427771] nvme nvme2: pci function 0000:05:00.0
[    2.488154] nvme nvme2: failed to set APST feature (2)
[    2.489895] nvme nvme1: failed to set APST feature (2)
[    2.498773] nvme nvme2: allocated 64 MiB host memory buffer.
[    2.500587] nvme nvme1: allocated 64 MiB host memory buffer.
[    2.504113] nvme nvme2: 7/0/0 default/read/poll queues
[    2.507026] nvme nvme1: 7/0/0 default/read/poll queues
[    2.509467] nvme nvme2: Ignoring bogus Namespace Identifiers
[    2.512804] nvme nvme1: Ignoring bogus Namespace Identifiers
[    2.513698]  nvme1n1: p1

Signed-off-by: Pablo Greco <pgreco@centosproject.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvme-tcp: always fail a request when sending it failed

queue stoppage and inflight requests cancellation is fully fenced from
io_work and thus failing a request from this context. Hence we don't
need to try to guess from the socket retcode if this failure is because
the queue is about to be torn down or not.

We are perfectly safe to just fail it, the request will not be cancelled
later on.

This solves possible very long shutdown delays when the users issues a
'nvme disconnect-all'

Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

nvmet-tcp: fix regression in data_digest calculation

Data digest calculation iterates over command mapped iovec. However
since commit bac04454ef9f we unmap the iovec before we handle the data
digest, and since commit 69b85e1f1d1d we clear nr_mapped when we unmap
the iov.

Instead of open-coding the command iov traversal, simply call
crypto_ahash_digest with the command sg that is already allocated (we
already do that for the send path). Rename nvmet_tcp_send_ddgst to
nvmet_tcp_calc_ddgst and call it from send and recv paths.

Fixes: 69b85e1f1d1d ("nvmet-tcp: add an helper to free the cmd buffers")
Fixes: bac04454ef9f ("nvmet-tcp: fix kmap leak when data digest in use")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>

NFC: nxp-nci: don't print header length mismatch on i2c error

Don't print a misleading header length mismatch error if the i2c call
returns an error. Instead just return the error code without any error
message.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

NFC: nxp-nci: Don't issue a zero length i2c_master_read()

There are packets which doesn't have a payload. In that case, the second
i2c_master_read() will have a zero length. But because the NFC
controller doesn't have any data left, it will NACK the I2C read and
-ENXIO will be returned. In case there is no payload, just skip the
second i2c master read.

Fixes: 6be88670fc59 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>