Christophe Leroy [Wed, 23 Dec 2020 09:38:47 +0000 (09:38 +0000)]
powerpc/xmon: Select CONSOLE_POLL for the 8xx
Powerpc 8xx requires CONSOLE_POLL to get udbg_putc() and
udbg_getc() in CPM uart driver.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3d10a274516e9be8c4b0dc679a2840cdc1588872.1608716197.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 23 Dec 2020 09:38:48 +0000 (09:38 +0000)]
powerpc/xmon: Enable breakpoints on 8xx
Since commit
4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint"),
8xx has breakpoints so there is no reason to opt breakpoint logic
out of xmon for the 8xx.
Fixes:
4ad8622dc548 ("powerpc/8xx: Implement hw_breakpoint")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b0607f1113d1558e73476bb06db0ee16d31a6e5b.1608716197.git.christophe.leroy@csgroup.eu
Christophe Leroy [Fri, 18 Dec 2020 06:56:05 +0000 (06:56 +0000)]
powerpc/32s: Only build hash code when CONFIG_PPC_BOOK3S_604 is selected
It is now possible to only build book3s/32 kernel for
CPUs without hash table.
Opt out hash related code when CONFIG_PPC_BOOK3S_604 is not selected.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/62df436454ef06e104cc334a0859a2878d7888d5.1608274548.git.christophe.leroy@csgroup.eu
Markus Elfring [Tue, 2 Jul 2019 12:41:42 +0000 (14:41 +0200)]
powerpc/setup: Adjust six seq_printf() calls in show_cpuinfo()
A bit of information should be put into a sequence.
Thus improve the execution speed for this data output by better usage
of corresponding functions.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5b62379e-a35f-4f56-f1b5-6350f76007e7@web.de
Markus Elfring [Tue, 27 Aug 2019 07:19:32 +0000 (09:19 +0200)]
powerpc/82xx: Use common error handling code in pq2ads_pci_init_irq()
Adjust jump targets so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1a4bafee-562f-5eb4-d2bd-34704f8c5ab3@web.de
Markus Elfring [Tue, 27 Aug 2019 06:44:20 +0000 (08:44 +0200)]
powerpc/82xx: Delete an unnecessary of_node_put() call in pq2ads_pci_init_irq()
A null pointer would be passed to a call of the function “of_node_put”
immediately after a call of the function “of_find_compatible_node” failed
at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/9c060a41-438b-6fb8-d549-37c72fae4898@web.de
Markus Elfring [Tue, 27 Aug 2019 11:37:56 +0000 (13:37 +0200)]
powerpc/pseries: Delete an error message for a failed string duplication in dlpar_store()
Omit an extra message for a memory allocation failure in this function.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/535cfec2-782f-61ec-f6fb-c50186ead2af@web.de
Markus Elfring [Tue, 27 Aug 2019 11:34:02 +0000 (13:34 +0200)]
powerpc/pseries: Delete an unnecessary kfree() call in dlpar_store()
A null pointer would be passed to a call of the function “kfree”
immediately after a call of the function “kstrdup” failed at one place.
Remove this superfluous function call.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/b46cc4ff-a14c-0c10-0c0c-95573a960178@web.de
Markus Elfring [Thu, 10 Dec 2020 13:14:07 +0000 (14:14 +0100)]
cxl: Reduce scope for the variable “mm” in cxllib_get_PE_attributes()
A local variable was used only within an if branch.
Thus move the definition for the variable “mm” into the corresponding
code block.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/5cee2b25-71e0-15aa-fba6-12211b8308aa@web.de
Qian Cai [Sun, 10 May 2020 05:15:59 +0000 (01:15 -0400)]
powerpc/mm/book3s64/iommu: fix some RCU-list locks
It is safe to traverse mm->context.iommu_group_mem_list with either
mem_list_mutex or the RCU read lock held. Silence a few RCU-list false
positive warnings and fix a few missing RCU read locks.
arch/powerpc/mm/book3s64/iommu_api.c:330 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4305:
#0:
c000000bc3fe4d68 (&container->lock){+.+.}-{3:3}, at: tce_iommu_ioctl.part.9+0xc7c/0x1870 [vfio_iommu_spapr_tce]
#1:
c000000001501910 (mem_list_mutex){+.+.}-{3:3}, at: mm_iommu_get+0x50/0x190
====
arch/powerpc/mm/book3s64/iommu_api.c:132 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4305:
#0:
c000000bc3fe4d68 (&container->lock){+.+.}-{3:3}, at: tce_iommu_ioctl.part.9+0xc7c/0x1870 [vfio_iommu_spapr_tce]
#1:
c000000001501910 (mem_list_mutex){+.+.}-{3:3}, at: mm_iommu_do_alloc+0x120/0x5f0
====
arch/powerpc/mm/book3s64/iommu_api.c:292 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4312:
#0:
c000000ecafe23c8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1:
c000000045e6c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
====
arch/powerpc/mm/book3s64/iommu_api.c:424 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
2 locks held by qemu-kvm/4312:
#0:
c000000ecafe23c8 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0xdc/0x950 [kvm]
#1:
c000000045e6c468 (&kvm->srcu){....}-{0:0}, at: kvmppc_h_put_tce+0x88/0x340 [kvm]
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200510051559.1959-1-cai@lca.pw
Qian Cai [Sun, 10 May 2020 05:13:47 +0000 (01:13 -0400)]
powerpc/powernv/pci: fix a RCU-list lock
It is unsafe to traverse tbl->it_group_list without the RCU read lock.
WARNING: suspicious RCU usage
5.7.0-rc4-next-
20200508 #1 Not tainted
-----------------------------
arch/powerpc/platforms/powernv/pci-ioda-tce.c:355 RCU-list traversed in non-reader section!!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by qemu-kvm/4305:
#0:
c000000bc3fe6988 (&container->group_lock){++++}-{3:3}, at: vfio_fops_unl_ioctl+0x108/0x410 [vfio]
#1:
c00800000fcc7400 (&vfio.iommu_drivers_lock){+.+.}-{3:3}, at: vfio_fops_unl_ioctl+0x148/0x410 [vfio]
#2:
c000000bc3fe4d68 (&container->lock){+.+.}-{3:3}, at: tce_iommu_attach_group+0x3c/0x4f0 [vfio_iommu_spapr_tce]
stack backtrace:
CPU: 4 PID: 4305 Comm: qemu-kvm Not tainted 5.7.0-rc4-next-
20200508 #1
Call Trace:
[
c0000010f29afa60] [
c0000000007154c8] dump_stack+0xfc/0x174 (unreliable)
[
c0000010f29afab0] [
c0000000001d8ff0] lockdep_rcu_suspicious+0x140/0x164
[
c0000010f29afb30] [
c0000000000dae2c] pnv_pci_unlink_table_and_group+0x11c/0x200
[
c0000010f29afb70] [
c0000000000d4a34] pnv_pci_ioda2_unset_window+0xc4/0x190
[
c0000010f29afbf0] [
c0000000000d4b4c] pnv_ioda2_take_ownership+0x4c/0xd0
[
c0000010f29afc30] [
c00800000fd60ee0] tce_iommu_attach_group+0x2c8/0x4f0 [vfio_iommu_spapr_tce]
[
c0000010f29afcd0] [
c00800000fcc11a0] vfio_fops_unl_ioctl+0x238/0x410 [vfio]
[
c0000010f29afd50] [
c0000000005430a8] ksys_ioctl+0xd8/0x130
[
c0000010f29afda0] [
c000000000543128] sys_ioctl+0x28/0x40
[
c0000010f29afdc0] [
c000000000038af4] system_call_exception+0x114/0x1e0
[
c0000010f29afe20] [
c00000000000c8f0] system_call_common+0xf0/0x278
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200510051347.1906-1-cai@lca.pw
Michal Suchanek [Wed, 20 Jan 2021 13:28:38 +0000 (14:28 +0100)]
powerpc: Fix build error in paravirt.h
./arch/powerpc/include/asm/paravirt.h:83:44: error: implicit declaration
of function 'smp_processor_id'; did you mean 'raw_smp_processor_id'?
smp_processor_id is defined in linux/smp.h but it is not included.
The build error happens only when the patch is applied to 5.3 kernel but
it only works by chance in mainline.
Fixes:
ca3f969dcb11 ("powerpc/paravirt: Use is_kvm_guest() in vcpu_is_preempted()")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210120132838.15589-1-msuchanek@suse.de
Ganesh Goudar [Thu, 28 Jan 2021 10:41:43 +0000 (16:11 +0530)]
powerpc/mce: Remove per cpu variables from MCE handlers
Access to per-cpu variables requires translation to be enabled on
pseries machine running in hash mmu mode, Since part of MCE handler
runs in realmode and part of MCE handling code is shared between ppc
architectures pseries and powernv, it becomes difficult to manage
these variables differently on different architectures, So have
these variables in paca instead of having them as per-cpu variables
to avoid complications.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210128104143.70668-2-ganeshgr@linux.ibm.com
Ganesh Goudar [Thu, 28 Jan 2021 10:41:42 +0000 (16:11 +0530)]
powerpc/mce: Reduce the size of event arrays
Maximum recursive depth of MCE is 4, Considering the maximum depth
allowed reduce the size of event to 10 from 100. This saves us ~19kB
of memory and has no fatal consequences.
Signed-off-by: Ganesh Goudar <ganeshgr@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210128104143.70668-1-ganeshgr@linux.ibm.com
Pingfan Liu [Thu, 22 Oct 2020 06:51:19 +0000 (14:51 +0800)]
powerpc/time: Enable sched clock for irqtime
When CONFIG_IRQ_TIME_ACCOUNTING and CONFIG_VIRT_CPU_ACCOUNTING_GEN, powerpc
does not enable "sched_clock_irqtime" and can not utilize irq time
accounting.
Like x86, powerpc does not use the sched_clock_register() interface. So it
needs an dedicated call to enable_sched_clock_irqtime() to enable irq time
accounting.
Fixes:
518470fe962e ("powerpc: Add HAVE_IRQ_TIME_ACCOUNTING")
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
[mpe: Add fixes tag]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1603349479-26185-1-git-send-email-kernelfans@gmail.com
Cédric Le Goater [Fri, 22 Jan 2021 07:50:29 +0000 (08:50 +0100)]
powerpc/prom: Fix "ibm,arch-vec-5-platform-support" scan
The "ibm,arch-vec-5-platform-support" property is a list of pairs of
bytes representing the options and values supported by the platform
firmware. At boot time, Linux scans this list and activates the
available features it recognizes : Radix and XIVE.
A recent change modified the number of entries to loop on and 8 bytes,
4 pairs of { options, values } entries are always scanned. This is
fine on KVM but not on PowerVM which can advertises less. As a
consequence on this platform, Linux reads extra entries pointing to
random data, interprets these as available features and tries to
activate them, leading to a firmware crash in
ibm,client-architecture-support.
Fix that by using the property length of "ibm,arch-vec-5-platform-support".
Fixes:
ab91239942a9 ("powerpc/prom: Remove VLA in prom_check_platform_support()")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210122075029.797013-1-clg@kaod.org
Oliver O'Halloran [Wed, 2 Sep 2020 03:51:21 +0000 (13:51 +1000)]
powerpc/pci: Delete traverse_pci_dn()
Nothing uses it.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200902035121.1762475-1-oohall@gmail.com
Oliver O'Halloran [Tue, 3 Nov 2020 05:15:12 +0000 (16:15 +1100)]
powerpc/eeh: Add a debugfs interface to check if a driver supports recovery
If a PCI device's current driver implements the error handling callbacks
EEH can use them to recover the device after an error occurs. For devices
without the error handling callbacks we recover them by removing the device
and re-scanning it so the PCI core puts the device back into a known good
state.
Currently there's no way for userspace to determine if the driver supports
recovery or not which makes it difficult to write automated tests for EEH.
This patch addressing that by adding a debugfs interface for querying if
a specific device can be recovered or not.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103051512.919333-2-oohall@gmail.com
Oliver O'Halloran [Tue, 3 Nov 2020 05:15:11 +0000 (16:15 +1100)]
powerpc/eeh: Rework pci_dev lookup in debugfs attributes
Pull the string -> pci_dev lookup stuff into a helper function. No functional change.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103051512.919333-1-oohall@gmail.com
Oliver O'Halloran [Tue, 3 Nov 2020 04:45:03 +0000 (15:45 +1100)]
selftests/powerpc: Add VF recovery tests
The basic EEH test ignores VFs since we the way the eeh_dev_break debugfs
interface works means that if multiple VFs are enabled we may cause errors
on all them them. However, we can work around that by only enabling a
single VF at a time.
This patch adds some infrastructure for finding SR-IOV capable devices and
enabling / disabling VFs so we can exercise the VF specific EEH recovery
paths. Two new tests are added, one for testing EEH aware devices and one
for EEH un-aware VFs.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103044503.917128-3-oohall@gmail.com
Oliver O'Halloran [Tue, 3 Nov 2020 04:45:02 +0000 (15:45 +1100)]
selftests/powerpc: Use stderr for debug messages in eeh-functions
We want to use stdout to return lists of devices, etc so log debug / status
messages to stderr rather than stdout.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103044503.917128-2-oohall@gmail.com
Oliver O'Halloran [Tue, 3 Nov 2020 04:45:01 +0000 (15:45 +1100)]
selftests/powerpc: Hoist helper code out of eeh-basic
Hoist some of the useful test environment checking and prep code into
eeh-functions.sh so they can be reused in other tests.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201103044503.917128-1-oohall@gmail.com
Ananth N Mavinakayanahalli [Mon, 25 Jan 2021 13:06:43 +0000 (18:36 +0530)]
powerpc/sstep: Fix incorrect return from analyze_instr()
We currently just percolate the return value from analyze_instr()
to the caller of emulate_step(), especially if it is a -1.
For one particular case (opcode = 4) for instructions that aren't
currently emulated, we are returning 'should not be single-stepped'
while we should have returned 0 which says 'did not emulate, may
have to single-step'.
Fixes:
930d6288a26787 ("powerpc: sstep: Add support for maddhd, maddhdu, maddld instructions")
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161157999039.64773.14950289716779364766.stgit@thinktux.local
Ananth N Mavinakayanahalli [Mon, 25 Jan 2021 13:06:22 +0000 (18:36 +0530)]
powerpc/sstep: Check instruction validity against ISA version before emulation
We currently unconditionally try to emulate newer instructions on older
Power versions that could cause issues. Gate it.
Fixes:
350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code")
Signed-off-by: Ananth N Mavinakayanahalli <ananth@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/161157995977.64773.13794501093457185080.stgit@thinktux.local
Christophe Leroy [Wed, 20 Jan 2021 07:49:14 +0000 (07:49 +0000)]
powerpc/44x: Remove STDBINUTILS kconfig option
STDBINUTILS is just a toggle to allow 256k page size to appear in the
possible page sizes list for the 44x.
Make 256k page size option appear all the time with an explicit
warning about binutils, and remove this unnecessary STDBINUTILS
config option.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Incorporate help text changes from David Laight]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/f9981e819009aa121a998dc483052ec76f78f991.1611128938.git.christophe.leroy@csgroup.eu
Christophe Leroy [Wed, 20 Jan 2021 07:49:13 +0000 (07:49 +0000)]
powerpc/47x: Disable 256k page size
PPC47x_TLBE_SIZE isn't defined for 256k pages, leading to a build
break if 256k pages is selected.
So change the kconfig so that 256k pages can't be selected for 47x.
Fixes:
e7f75ad01d59 ("powerpc/47x: Base ppc476 support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
[mpe: Expand change log to mention build break]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2fed79b1154c872194f98bac4422c23918325e61.1611128938.git.christophe.leroy@csgroup.eu
Christophe Leroy [Tue, 19 Jan 2021 06:36:52 +0000 (06:36 +0000)]
powerpc/kvm: Force selection of CONFIG_PPC_FPU
book3s/32 kvm is designed with the assumption that
an FPU is always present.
Force selection of FPU support in the kernel when
build KVM.
Fixes:
7d68c8916950 ("powerpc/32s: Allow deselecting CONFIG_PPC_FPU on mpc832x")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/74461a99fa1466f361532ca794ca0753be3d9f86.1611038044.git.christophe.leroy@csgroup.eu
Nicholas Piggin [Mon, 18 Jan 2021 12:34:51 +0000 (22:34 +1000)]
powerpc: Always enable queued spinlocks for 64s, disable for others
Queued spinlocks have shown to have good performance and fairness
properties even on smaller (2 socket) POWER systems. This selects them
automatically for 64s. For other platforms they are de-selected, the
standard spinlock is far simpler and smaller code, and single chips
with a handful of cores is unlikely to show any improvement.
CONFIG_EXPERT still allows this to be changed, e.g., to help debug
performance or correctness issues.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210118123451.1452206-1-npiggin@gmail.com
Cédric Le Goater [Sat, 12 Dec 2020 14:27:07 +0000 (15:27 +0100)]
powerpc/vas: Fix IRQ name allocation
The VAS device allocates a generic interrupt to handle page faults but
the IRQ name doesn't show under /proc. This is because it's on
stack. Allocate the name.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201212142707.2102141-1-clg@kaod.org
Alexey Kardashevskiy [Wed, 13 Jan 2021 10:20:14 +0000 (21:20 +1100)]
powerpc/iommu/debug: Add debugfs entries for IOMMU tables
This adds a folder per LIOBN under /sys/kernel/debug/iommu with IOMMU
table parameters.
This is enabled by CONFIG_IOMMU_DEBUGFS.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210113102014.124452-1-aik@ozlabs.ru
Cédric Le Goater [Mon, 4 Jan 2021 14:32:06 +0000 (15:32 +0100)]
powerpc/pseries/eeh: Make pseries_send_allow_unfreeze() static
Only used locally. It fixes this W=1 compile error :
../arch/powerpc/platforms/pseries/eeh_pseries.c:697:5: error: no previous prototype for ‘pseries_send_allow_unfreeze’ [-Werror=missing-prototypes]
697 | int pseries_send_allow_unfreeze(struct pci_dn *pdn,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-24-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:05 +0000 (15:32 +0100)]
powerpc/pcidn: Make IOV setup routines static
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/platforms/pseries/pci.c:58:5: error: no previous prototype for ‘pseries_send_map_pe’ [-Werror=missing-prototypes]
58 | int pseries_send_map_pe(struct pci_dev *pdev,
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:91:6: error: no previous prototype for ‘pseries_set_pe_num’ [-Werror=missing-prototypes]
91 | void pseries_set_pe_num(struct pci_dev *pdev, u16 vf_index, __be16 pe_num)
| ^~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:105:5: error: no previous prototype for ‘pseries_associate_pes’ [-Werror=missing-prototypes]
105 | int pseries_associate_pes(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:149:5: error: no previous prototype for ‘pseries_pci_sriov_enable’ [-Werror=missing-prototypes]
149 | int pseries_pci_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:192:5: error: no previous prototype for ‘pseries_pcibios_sriov_enable’ [-Werror=missing-prototypes]
192 | int pseries_pcibios_sriov_enable(struct pci_dev *pdev, u16 num_vfs)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/pci.c:199:5: error: no previous prototype for ‘pseries_pcibios_sriov_disable’ [-Werror=missing-prototypes]
199 | int pseries_pcibios_sriov_disable(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-23-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:04 +0000 (15:32 +0100)]
powerpc/pseries: Make IOV setup routines static
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/platforms/pseries/setup.c:610:17: error: no previous prototype for ‘pseries_get_iov_fw_value’ [-Werror=missing-prototypes]
610 | resource_size_t pseries_get_iov_fw_value(struct pci_dev *dev, int resno,
| ^~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:646:6: error: no previous prototype for ‘of_pci_set_vf_bar_size’ [-Werror=missing-prototypes]
646 | void of_pci_set_vf_bar_size(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/platforms/pseries/setup.c:668:6: error: no previous prototype for ‘of_pci_parse_iov_addrs’ [-Werror=missing-prototypes]
668 | void of_pci_parse_iov_addrs(struct pci_dev *dev, const int *indexes)
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-22-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:03 +0000 (15:32 +0100)]
KVM: PPC: Book3S HV: Declare some prototypes
This fixes these W=1 compile errors:
../arch/powerpc/kvm/book3s_hv_builtin.c:425:6: error: no previous prototype for ‘kvmppc_read_intr’ [-Werror=missing-prototypes]
425 | long kvmppc_read_intr(void)
| ^~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:652:6: error: no previous prototype for ‘kvmppc_bad_interrupt’ [-Werror=missing-prototypes]
652 | void kvmppc_bad_interrupt(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:695:6: error: no previous prototype for ‘kvmhv_p9_set_lpcr’ [-Werror=missing-prototypes]
695 | void kvmhv_p9_set_lpcr(struct kvm_split_mode *sip)
| ^~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:740:6: error: no previous prototype for ‘kvmhv_p9_restore_lpcr’ [-Werror=missing-prototypes]
740 | void kvmhv_p9_restore_lpcr(struct kvm_split_mode *sip)
| ^~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:768:6: error: no previous prototype for ‘kvmppc_set_msr_hv’ [-Werror=missing-prototypes]
768 | void kvmppc_set_msr_hv(struct kvm_vcpu *vcpu, u64 msr)
| ^~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_hv_builtin.c:817:6: error: no previous prototype for ‘kvmppc_inject_interrupt_hv’ [-Werror=missing-prototypes]
817 | void kvmppc_inject_interrupt_hv(struct kvm_vcpu *vcpu, int vec, u64 srr1_flags)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-21-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:02 +0000 (15:32 +0100)]
KVM: PPC: Book3S HV: Include prototypes
It fixes these W=1 compile errors :
CC [M] arch/powerpc/kvm/book3s_64_mmu_hv.o
../arch/powerpc/kvm/book3s_64_mmu_hv.c:879:5: error: no previous prototype for ‘kvm_unmap_hva_range_hv’ [-Werror=missing-prototypes]
879 | int kvm_unmap_hva_range_hv(struct kvm *kvm, unsigned long start, unsigned long end)
| ^~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:888:6: error: no previous prototype for ‘kvmppc_core_flush_memslot_hv’ [-Werror=missing-prototypes]
888 | void kvmppc_core_flush_memslot_hv(struct kvm *kvm,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:970:5: error: no previous prototype for ‘kvm_age_hva_hv’ [-Werror=missing-prototypes]
970 | int kvm_age_hva_hv(struct kvm *kvm, unsigned long start, unsigned long end)
| ^~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:1011:5: error: no previous prototype for ‘kvm_test_age_hva_hv’ [-Werror=missing-prototypes]
1011 | int kvm_test_age_hva_hv(struct kvm *kvm, unsigned long hva)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/book3s_64_mmu_hv.c:1019:6: error: no previous prototype for ‘kvm_set_spte_hva_hv’ [-Werror=missing-prototypes]
1019 | void kvm_set_spte_hva_hv(struct kvm *kvm, unsigned long hva, pte_t pte)
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-20-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:01 +0000 (15:32 +0100)]
KVM: PPC: Make the VMX instruction emulation routines static
These are only used locally. It fixes these W=1 compile errors :
../arch/powerpc/kvm/powerpc.c:1521:5: error: no previous prototype for ‘kvmppc_get_vmx_dword’ [-Werror=missing-prototypes]
1521 | int kvmppc_get_vmx_dword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1539:5: error: no previous prototype for ‘kvmppc_get_vmx_word’ [-Werror=missing-prototypes]
1539 | int kvmppc_get_vmx_word(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1557:5: error: no previous prototype for ‘kvmppc_get_vmx_hword’ [-Werror=missing-prototypes]
1557 | int kvmppc_get_vmx_hword(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~~
../arch/powerpc/kvm/powerpc.c:1575:5: error: no previous prototype for ‘kvmppc_get_vmx_byte’ [-Werror=missing-prototypes]
1575 | int kvmppc_get_vmx_byte(struct kvm_vcpu *vcpu, int index, u64 *val)
| ^~~~~~~~~~~~~~~~~~~
Fixes:
acc9eb9305fe ("KVM: PPC: Reimplement LOAD_VMX/STORE_VMX instruction mmio emulation with analyse_instr() input")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-19-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:32:00 +0000 (15:32 +0100)]
powerpc/watchdog: Declare soft_nmi_interrupt() prototype
soft_nmi_interrupt() usage requires PPC_WATCHDOG to be configured.
Check the CONFIG definition to declare the prototype.
It fixes this W=1 compile error :
../arch/powerpc/kernel/watchdog.c:250:6: error: no previous prototype for ‘soft_nmi_interrupt’ [-Werror=missing-prototypes]
250 | void soft_nmi_interrupt(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-18-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:59 +0000 (15:31 +0100)]
powerpc/mm: Declare arch_report_meminfo() prototype.
It fixes this W=1 compile error :
../arch/powerpc/mm/book3s64/pgtable.c:411:6: error: no previous prototype for ‘arch_report_meminfo’ [-Werror=missing-prototypes]
411 | void arch_report_meminfo(struct seq_file *m)
| ^~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-17-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:58 +0000 (15:31 +0100)]
powerpc/mm/hugetlb: Make pseries_alloc_bootmem_huge_page() static
pseries_alloc_bootmem_huge_page() is only used locally in
alloc_bootmem_huge_page() and does not need to be external.
It fixes this W=1 compile error :
../arch/powerpc/mm/hugetlbpage.c:220:12: error: no previous prototype for ‘pseries_alloc_bootmem_huge_page’ [-Werror=missing-prototypes]
220 | int __init pseries_alloc_bootmem_huge_page(struct hstate *hstate)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-16-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:57 +0000 (15:31 +0100)]
powerpc/mm: Declare preload_new_slb_context() prototype
It fixes this W=1 compile error :
../arch/powerpc/mm/book3s64/slb.c:380:6: error: no previous prototype for ‘preload_new_slb_context’ [-Werror=missing-prototypes]
380 | void preload_new_slb_context(unsigned long start, unsigned long sp)
| ^~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-15-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:56 +0000 (15:31 +0100)]
powerpc/mm: Move hpte_insert_repeating() prototype
It fixes this W=1 compile error :
../arch/powerpc/mm/book3s64/hash_utils.c:1867:6: error: no previous prototype for ‘hpte_insert_repeating’ [-Werror=missing-prototypes]
1867 | long hpte_insert_repeating(unsigned long hash, unsigned long vpn,
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-14-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:55 +0000 (15:31 +0100)]
powerpc/mm: Declare some prototypes
It fixes this W=1 compile error :
../arch/powerpc/mm/book3s64/hash_utils.c:1515:5: error: no previous prototype for ‘__hash_page’ [-Werror=missing-prototypes]
1515 | int __hash_page(unsigned long trap, unsigned long ea, unsigned long dsisr,
| ^~~~~~~~~~~
../arch/powerpc/mm/book3s64/hash_utils.c:1850:6: error: no previous prototype for ‘low_hash_fault’ [-Werror=missing-prototypes]
1850 | void low_hash_fault(struct pt_regs *regs, unsigned long address, int rc)
| ^~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-13-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:54 +0000 (15:31 +0100)]
powerpc/optprobes: Make patch_imm64_load_insns() static
patch_imm64_load_insns() is only used locally in
arch_prepare_optimized_kprobe() and does not need to be external.
It fixes this W=1 compile error :
../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm64_load_insns’ [-Werror=missing-prototypes]
149 | void patch_imm64_load_insns(unsigned int val, kprobe_opcode_t *addr)
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-12-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:53 +0000 (15:31 +0100)]
powerpc/optprobes: Remove unused routine patch_imm32_load_insns()
Commit
650b55b707fd ("powerpc: Add prefixed instructions to instruction
data type") removed the use of patch_imm32_load_insns(). Clean it up
to fix this W=1 compile error :
../arch/powerpc/kernel/optprobes.c:149:6: error: no previous prototype for ‘patch_imm32_load_insns’ [-Werror=missing-prototypes]
149 | void patch_imm32_load_insns(unsigned int val, kprobe_opcode_t *addr)
Fixes:
650b55b707fd ("powerpc: Add prefixed instructions to instruction data type")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-11-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:52 +0000 (15:31 +0100)]
powerpc/smp: Make debugger_ipi_callback() static
debugger_ipi_callback() is a local routine used as a NMI IPI handler and
does not need to be external.
It fixes this W=1 compile error :
../arch/powerpc/kernel/smp.c:579:6: error: no previous prototype for ‘debugger_ipi_callback’ [-Werror=missing-prototypes]
579 | void debugger_ipi_callback(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-10-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:51 +0000 (15:31 +0100)]
powerpc/smp: Include tick_broadcast() prototype
It fixes this W=1 compile error :
../arch/powerpc/kernel/smp.c:569:6: error: no previous prototype for ‘tick_broadcast’ [-Werror=missing-prototypes]
569 | void tick_broadcast(const struct cpumask *mask)
| ^~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-9-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:50 +0000 (15:31 +0100)]
powerpc/mce: Include prototypes
It fixes these W=1 compile errors :
../arch/powerpc/kernel/mce.c:591:14: error: no previous prototype for ‘machine_check_early’ [-Werror=missing-prototypes]
591 | long notrace machine_check_early(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/mce.c:725:6: error: no previous prototype for ‘hmi_exception_realmode’ [-Werror=missing-prototypes]
725 | long hmi_exception_realmode(struct pt_regs *regs)
| ^~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-8-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:49 +0000 (15:31 +0100)]
powerpc/setup_64: Make some routines static
The following routines are only called by local services and do not
need to be external symbols.
It fixes these W=1 errors :
../arch/powerpc/kernel/setup_64.c:261:13: error: no previous prototype for ‘record_spr_defaults’ [-Werror=missing-prototypes]
261 | void __init record_spr_defaults(void)
| ^~~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/setup_64.c:1011:6: error: no previous prototype for ‘entry_flush_enable’ [-Werror=missing-prototypes]
1011 | void entry_flush_enable(bool enable)
| ^~~~~~~~~~~~~~~~~~
../arch/powerpc/kernel/setup_64.c:1023:6: error: no previous prototype for ‘uaccess_flush_enable’ [-Werror=missing-prototypes]
1023 | void uaccess_flush_enable(bool enable)
| ^~~~~~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-7-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:48 +0000 (15:31 +0100)]
powerpc/pmem: Include pmem prototypes
It fixes this W=1 compile error :
../arch/powerpc/lib/pmem.c:51:6: error: no previous prototype for ‘arch_wb_cache_pmem’ [-Werror=missing-prototypes]
51 | void arch_wb_cache_pmem(void *addr, size_t size)
| ^~~~~~~~~~~~~~~~~~
../arch/powerpc/lib/pmem.c:58:6: error: no previous prototype for ‘arch_invalidate_pmem’ [-Werror=missing-prototypes]
58 | void arch_invalidate_pmem(void *addr, size_t size)
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
32ce3862af3c ("powerpc/lib: Implement PMEM API")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-6-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:47 +0000 (15:31 +0100)]
powerpc/pseries/ras: Make init_ras_hotplug_IRQ() static
init_ras_hotplug_IRQ() is a local routine used by a machine init call
and it doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/ras.c:125:12: error: no previous prototype for ‘init_ras_hotplug_IRQ’ [-Werror=missing-prototypes]
125 | int __init init_ras_hotplug_IRQ(void)
| ^~~~~~~~~~~~~~~~~~~~
Fixes:
c9dccf1d074a ("powerpc/pseries: Enable RAS hotplug events later")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-5-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:46 +0000 (15:31 +0100)]
powerpc/pseries/eeh: Make pseries_pcibios_bus_add_device() static
pseries_pcibios_bus_add_device() is a local routine defining the
pcibios_bus_add_device() handler of the pseries machine in
eeh_pseries_init(). It doesn't need to be external.
It fixes this W=1 compile error:
../arch/powerpc/platforms/pseries/eeh_pseries.c:46:6: error: no previous prototype for ‘pseries_pcibios_bus_add_device’ [-Werror=missing-prototypes]
46 | void pseries_pcibios_bus_add_device(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes:
dae7253f9f78 ("powerpc/pseries: Add pseries SR-IOV Machine dependent calls")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-4-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:45 +0000 (15:31 +0100)]
powerpc/pseries/ras: Remove unused variable 'status'
The last use of 'status' was removed in 2012. Remove the variable to
fix this W=1 compile error.
../arch/powerpc/platforms/pseries/ras.c: In function ‘ras_epow_interrupt’:
../arch/powerpc/platforms/pseries/ras.c:318:6: error: variable ‘status’ set but not used [-Werror=unused-but-set-variable]
318 | int status;
| ^~~~~~
Fixes:
55fc0c561742 ("powerpc/pseries: Parse and handle EPOW interrupts")
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-3-clg@kaod.org
Cédric Le Goater [Mon, 4 Jan 2021 14:31:44 +0000 (15:31 +0100)]
powerpc/mm: Include __find_linux_pte() prototype
It fixes this W=1 compile error :
../arch/powerpc/mm/pgtable.c:337:8: error: no previous prototype for ‘__find_linux_pte’ [-Werror=missing-prototypes]
337 | pte_t *__find_linux_pte(pgd_t *pgdir, unsigned long ea,
| ^~~~~~~~~~~~~~~~
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210104143206.695198-2-clg@kaod.org
Kajol Jain [Mon, 28 Dec 2020 08:52:04 +0000 (14:22 +0530)]
powerpc/perf/hv-24x7: Dont create sysfs event files for dummy events
The hv_24x7 performance monitoring unit creates a list of supported
events from the event catalog obtained via HCALL. The hv_24x7 catalog
could also contain invalid or dummy events with names like RESERVED*.
These events do not have any hardware counters backing them. Add a
check to string compare the event names to filter such events out.
Result on power9 machine:
Before this patch:
.....
hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST1,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST10,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST11,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST12,chip=?/ [Kernel PMU event]
hv_24x7/RESERVED_NEST13,chip=?/ [Kernel PMU event]
......
dmesg:
[ 0.000362] printk: console [hvc0] enabled
[ 0.815452] hv-24x7: read 1530 catalog entries, created 537 event attrs (0 failures), 275 descs
After this patch:
......
hv_24x7/PM_XLINK2_OUT_ODD_AVLBL_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_CYC,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_DATA_COUNT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XLINK2_OUT_ODD_TOTAL_UTIL,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATR_DEMAND_CHECKOUT_MISS,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_SENT,chip=?/ [Kernel PMU event]
hv_24x7/PM_XTS_ATSD_TLBI_RCV,chip=?/ [Kernel PMU event]
hv_24x7/TOD,chip=?/ [Kernel PMU event]
......
dmesg:
[ 0.000357] printk: console [hvc0] enabled
[ 0.808592] hv-24x7: read 1530 catalog entries, created 509 event attrs (0 failures), 275 descs
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
[mpe: Simplify ignore_event(), minor change log formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228085204.18026-1-kjain@linux.ibm.com
Michael Ellerman [Thu, 17 Dec 2020 00:53:06 +0000 (11:53 +1100)]
powerpc/64s/kuap: Use mmu_has_feature()
In commit
8150a153c013 ("powerpc/64s: Use early_mmu_has_feature() in
set_kuap()") we switched the KUAP code to use early_mmu_has_feature(),
to avoid a bug where we called set_kuap() before feature patching had
been done, leading to recursion and crashes.
That path, which called probe_kernel_read() from printk(), has since
been removed, see commit
2ac5a3bf7042 ("vsprintf: Do not break early
boot with probing addresses").
Additionally probe_kernel_read() no longer invokes any KUAP routines,
since commit
fe557319aa06 ("maccess: rename probe_kernel_{read,write}
to copy_{from,to}_kernel_nofault") and
c33165253492 ("powerpc: use
non-set_fs based maccess routines").
So it should now be safe to use mmu_has_feature() in the KUAP
routines, because we shouldn't invoke them prior to feature patching.
This is essentially a revert of commit
8150a153c013 ("powerpc/64s: Use
early_mmu_has_feature() in set_kuap()"), but we've since added a
second usage of early_mmu_has_feature() in get_kuap(), so we convert
that to use mmu_has_feature() as well.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Depends-on:
c33165253492 ("powerpc: use non-set_fs based maccess routines").
Link: https://lore.kernel.org/r/20201217005306.895685-1-mpe@ellerman.id.au
Zheng Yongjun [Thu, 24 Dec 2020 13:24:46 +0000 (21:24 +0800)]
ocxl: use DEFINE_MUTEX() for mutex lock
mutex lock can be initialized automatically with DEFINE_MUTEX()
rather than explicitly calling mutex_init().
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201224132446.31286-1-zhengyongjun3@huawei.com
Po-Hsu Lin [Mon, 28 Dec 2020 04:34:59 +0000 (12:34 +0800)]
selftests/powerpc: Make the test check in eeh-basic.sh posix compliant
The == operand is a bash extension, thus this will fail on Ubuntu
with:
./eeh-basic.sh: 89: test: 2: unexpected operator
As the /bin/sh on Ubuntu is pointed to DASH.
Use -eq to fix this posix compatibility issue.
Fixes:
996f9e0f93f162 ("selftests/powerpc: Fix eeh-basic.sh exit codes")
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20201228043459.14281-1-po-hsu.lin@canonical.com
Linus Torvalds [Sun, 3 Jan 2021 23:55:30 +0000 (15:55 -0800)]
Linux 5.11-rc2
Linus Torvalds [Sat, 2 Jan 2021 20:22:46 +0000 (12:22 -0800)]
Merge tag 's390-5.11-3' of git://git./linux/kernel/git/s390/linux
Pull s390 cleanups from Vasily Gorbik:
"Update defconfigs and sort config select list"
* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/Kconfig: sort config S390 select list once again
s390: update defconfigs
Linus Torvalds [Sat, 2 Jan 2021 19:53:05 +0000 (11:53 -0800)]
Merge tag 'pm-5.11-rc2' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Rafael J. Wysocki [Sat, 2 Jan 2021 09:16:32 +0000 (10:16 +0100)]
Merge branches 'pm-cpufreq' and 'pm-cpuidle'
* pm-cpufreq:
cpufreq: intel_pstate: Fix fast-switch fallback path
* pm-cpuidle:
intel_idle: add SnowRidge C-state table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
Linus Torvalds [Fri, 1 Jan 2021 20:58:07 +0000 (12:58 -0800)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
Linus Torvalds [Fri, 1 Jan 2021 20:49:09 +0000 (12:49 -0800)]
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Linus Torvalds [Fri, 1 Jan 2021 20:29:49 +0000 (12:29 -0800)]
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
Linus Torvalds [Mon, 28 Dec 2020 19:40:22 +0000 (11:40 -0800)]
depmod: handle the case of /sbin/depmod without /sbin in PATH
Commit
436e980e2ed5 ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:16 +0000 (21:34 +0000)]
kernel/io_uring: cancel io_uring before task works
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:15 +0000 (21:34 +0000)]
io_uring: fix io_sqe_files_unregister() hangs
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pavel Begunkov [Wed, 30 Dec 2020 21:34:14 +0000 (21:34 +0000)]
io_uring: add a helper for setting a ref node
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Wed, 30 Dec 2020 20:02:12 +0000 (12:02 -0800)]
Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
Artem Bityutskiy [Sun, 27 Dec 2020 10:11:16 +0000 (12:11 +0200)]
intel_idle: add SnowRidge C-state table
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Tue, 29 Dec 2020 17:08:18 +0000 (18:08 +0100)]
cpufreq: intel_pstate: Fix fast-switch fallback path
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit
a365ab6b9dfb ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes:
a365ab6b9dfb ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Rafael J. Wysocki [Wed, 30 Dec 2020 17:19:34 +0000 (18:19 +0100)]
Merge branch 'opp/linux-next' of git://git./linux/kernel/git/vireshk/pm
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
Heiko Carstens [Mon, 28 Dec 2020 08:51:57 +0000 (09:51 +0100)]
s390/Kconfig: sort config S390 select list once again
...and add comments at the top and bottom.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Heiko Carstens [Wed, 18 Nov 2020 20:23:33 +0000 (21:23 +0100)]
s390: update defconfigs
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Andres Freund [Mon, 28 Dec 2020 19:27:18 +0000 (11:27 -0800)]
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
This was missed in
021a24460dc2. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes:
021a24460dc28e7412aecfae89f60e1847e685c0
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Randy Dunlap [Tue, 29 Dec 2020 03:47:06 +0000 (19:47 -0800)]
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes:
4e7b5671c6a8 ("block: remove i_bdev")
Fixes:
37c3fc9abb25 ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Tue, 29 Dec 2020 23:45:49 +0000 (15:45 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
Roman Gushchin [Tue, 29 Dec 2020 23:15:07 +0000 (15:15 -0800)]
mm: slub: call account_slab_page() after slab page initialization
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:15:04 +0000 (15:15 -0800)]
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
In commit
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.
However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.
[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes:
11fb479ff5d9 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ilya Leoshkevich [Tue, 29 Dec 2020 23:15:01 +0000 (15:15 -0800)]
lib/zlib: fix inflating zlib streams on s390
Decompressing zlib streams on s390 fails with "incorrect data check"
error.
Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior. At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values. For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.
Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.
Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes:
126196100063 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:58 +0000 (15:14 -0800)]
lib/genalloc: fix the overflow when size is too big
Some graphic card has very big memory on chip, such as 32G bytes.
In the following case, it will cause overflow:
pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);
va = gen_pool_alloc(pool, SZ_4G);
The overflow occurs in gen_pool_alloc_algo_owner():
....
size = nbits << order;
....
The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.
This patch converts some "int" to "unsigned long", and
changes the compare code in while.
Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Josh Poimboeuf [Tue, 29 Dec 2020 23:14:55 +0000 (15:14 -0800)]
kdev_t: always inline major/minor helper functions
Silly GCC doesn't always inline these trivial functions.
Fixes the following warning:
arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled
Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.com
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org> [build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Huang Shijie [Tue, 29 Dec 2020 23:14:52 +0000 (15:14 -0800)]
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Randy Dunlap [Tue, 29 Dec 2020 23:14:49 +0000 (15:14 -0800)]
local64.h: make <asm/local64.h> mandatory
Make <asm-generic/local64.h> mandatory in include/asm-generic/Kbuild and
remove all arch/*/include/asm/local64.h arch-specific files since they
only #include <asm-generic/local64.h>.
This fixes build errors on arch/c6x/ and arch/nios2/ for
block/blk-iocost.c.
Build-tested on 21 of 25 arch-es. (tools problems on the others)
Yes, we could even rename <asm-generic/local64.h> to
<linux/local64.h> and change all #includes to use
<linux/local64.h> instead.
Link: https://lkml.kernel.org/r/20201227024446.17018-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Walter Wu [Tue, 29 Dec 2020 23:14:46 +0000 (15:14 -0800)]
kasan: fix null pointer dereference in kasan_record_aux_stack
Syzbot reported the following [1]:
BUG: kernel NULL pointer dereference, address:
0000000000000008
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD
2d993067 P4D
2d993067 PUD
19a3c067 PMD 0
Oops: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 3852 Comm: kworker/1:2 Not tainted 5.10.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: events free_ipc
RIP: 0010:kasan_record_aux_stack+0x77/0xb0
Add null checking slab object from kasan_get_alloc_meta() in order to
avoid null pointer dereference.
[1] https://syzkaller.appspot.com/x/log.txt?x=
10a82a50d00000
Link: https://lkml.kernel.org/r/20201228080018.23041-1-walter-zh.wu@mediatek.com
Signed-off-by: Walter Wu <walter-zh.wu@mediatek.com>
Suggested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicholas Piggin [Tue, 29 Dec 2020 23:14:43 +0000 (15:14 -0800)]
mm: generalise COW SMC TLB flushing race comment
I'm not sure if I'm completely missing something here, but AFAIKS the
reference to the mysterious "COW SMC race" confuses the issue. The
original changelog and mailing list thread didn't help me either.
This SMC race is where the problem was detected, but isn't the general
problem bigger and more obvious: that the new PTE could be picked up at
any time by any TLB while entries for the old PTE exist in other TLBs
before the TLB flush takes effect?
The case where the iTLB and dTLB of a CPU are pointing at different pages
is an interesting one but follows from the general problem.
The other (minor) thing with the comment I think it makes it a bit clearer
to say what the old code was doing (i.e., it avoids the race as opposed to
what?).
References:
4ce072f1faf29 ("mm: fix a race condition under SMC + COW")
Link: https://lkml.kernel.org/r/20201215121119.351650-1-npiggin@gmail.com
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <sbsiddha@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kalesh Singh [Tue, 29 Dec 2020 23:14:40 +0000 (15:14 -0800)]
mm/mremap.c: fix extent calculation
When `next < old_addr`, `next - old_addr` arithmetic underflows causing
`extent` to be incorrect.
Make `extent` the smaller of `next - old_addr` or `old_end - old_addr`.
Link: https://lkml.kernel.org/r/20201219170433.2418867-1-kaleshsingh@google.com
Fixes:
c49dd34018026 ("mm: speedup mremap on 1GB or larger regions")
Signed-off-by: Kalesh Singh <kaleshsingh@google.com>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Lokesh Gidra <lokeshgidra@google.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Baoquan He [Tue, 29 Dec 2020 23:14:37 +0000 (15:14 -0800)]
mm: memmap defer init doesn't work as expected
VMware observed a performance regression during memmap init on their
platform, and bisected to commit
73a6e474cb376 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.
Before the commit:
[0.033176] Normal zone: 1445888 pages used for memmap
[0.033176] Normal zone:
89391104 pages, LIFO batch:63
[0.035851] ACPI: PM-Timer IO Port: 0x448
With commit
[0.026874] Normal zone: 1445888 pages used for memmap
[0.026875] Normal zone:
89391104 pages, LIFO batch:63
[2.028450] ACPI: PM-Timer IO Port: 0x448
The root cause is the current memmap defer init doesn't work as expected.
Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node. However, since commit
73a6e474cb376,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.
E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2. The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff]. In fact, we only expect to see that there's
only one memory section's memmap initialized. That's why more time is
costed at the time.
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[ 0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[ 0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[ 0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[ 0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[ 0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]
Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.
Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit
73a6e474cb376 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: Baoquan He <bhe@redhat.com>
Reported-by: Rahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Souptick Joarder [Tue, 29 Dec 2020 23:14:34 +0000 (15:14 -0800)]
mm: add prototype for __add_to_page_cache_locked()
Otherwise it causes a gcc warning:
mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]
A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.
Adding a prototype will silence the warning.
Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.com
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Joe Perches [Tue, 29 Dec 2020 23:14:31 +0000 (15:14 -0800)]
checkpatch: prefer strscpy to strlcpy
Prefer strscpy over the deprecated strlcpy function.
Link: https://lkml.kernel.org/r/19fe91084890e2c16fe56f960de6c570a93fa99b.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Requested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Masahiro Yamada [Tue, 29 Dec 2020 23:14:28 +0000 (15:14 -0800)]
Revert "kbuild: avoid static_assert for genksyms"
This reverts commit
14dc3983b5dff513a90bd5a8cc90acaf7867c3d0.
Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
"I guess what you propose is simpler, but might still have corner cases
where we still get warnings. In particular, if some file (for whatever
reason) does not include build_bug.h and uses a raw _Static_assert(),
then we still get warnings. E.g. I see 1 user of raw _Static_assert()
(drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."
I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.
Even after commit
14dc3983b5df ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.
---------------->8----------------
#include <linux/export.h>
_Static_assert((1 ?: 0), "");
void foo(void) { }
EXPORT_SYMBOL(foo);
---------------->8----------------
WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.
Now that commit
869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.
Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.org
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mike Kravetz [Tue, 29 Dec 2020 23:14:25 +0000 (15:14 -0800)]
mm/hugetlb: fix deadlock in hugetlb_cow error path
syzbot reported the deadlock here [1]. The issue is in hugetlb cow
error handling when there are not enough huge pages for the faulting
task which took the original reservation. It is possible that other
(child) tasks could have consumed pages associated with the reservation.
In this case, we want the task which took the original reservation to
succeed. So, we unmap any associated pages in children so that they can
be used by the faulting task that owns the reservation.
The unmapping code needs to hold i_mmap_rwsem in write mode. However,
due to commit
c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd
sharing synchronization") we are already holding i_mmap_rwsem in read
mode when hugetlb_cow is called.
Technically, i_mmap_rwsem does not need to be held in read mode for COW
mappings as they can not share pmd's. Modifying the fault code to not
take i_mmap_rwsem in read mode for COW (and other non-sharable) mappings
is too involved for a stable fix.
Instead, we simply drop the hugetlb_fault_mutex and i_mmap_rwsem before
unmapping. This is OK as it is technically not needed. They are
reacquired after unmapping as expected by calling code. Since this is
done in an uncommon error path, the overhead of dropping and reacquiring
mutexes is acceptable.
While making changes, remove redundant BUG_ON after unmap_ref_private.
[1] https://lkml.kernel.org/r/
000000000000b73ccc05b5cf8558@google.com
Link: https://lkml.kernel.org/r/4c5781b8-3b00-761e-c0c7-c5edebb6ec1a@oracle.com
Fixes:
c0d0381ade79 ("hugetlbfs: use i_mmap_rwsem for more pmd sharing synchronization")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reported-by: syzbot+5eee4145df3c15e96625@syzkaller.appspotmail.com
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Harish [Tue, 29 Dec 2020 23:14:22 +0000 (15:14 -0800)]
selftests/vm: fix building protection keys test
Commit
d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error") tried
to include a ARCH check for powerpc, however ARCH is not defined in the
Makefile before including lib.mk. This makes test building to skip on
both x86 and powerpc.
Fix the arch check by replacing it using machine type as it is already
defined and used in the test.
Link: https://lkml.kernel.org/r/20201215100402.257376-1-harish@linux.ibm.com
Fixes:
d8cbe8bfa7d ("tools/testing/selftests/vm: fix build error")
Signed-off-by: Harish <harish@linux.ibm.com>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Jens Axboe [Tue, 29 Dec 2020 17:50:46 +0000 (10:50 -0700)]
io_uring: don't assume mm is constant across submits
If we COW the identity, we assume that ->mm never changes. But this
isn't true of multiple processes end up sharing the ring. Hence treat
id->mm like like any other process compontent when it comes to the
identity mapping. This is pretty trivial, just moving the existing grab
into io_grab_identity(), and including a check for the match.
Cc: stable@vger.kernel.org # 5.10
Fixes:
1e6fa5216a0e ("io_uring: COW io_identity on mismatch")
Reported-by: Christian Brauner <christian.brauner@ubuntu.com>:
Tested-by: Christian Brauner <christian.brauner@ubuntu.com>:
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Linus Torvalds [Mon, 28 Dec 2020 21:32:16 +0000 (13:32 -0800)]
Merge tag 'for-5.11/dm-fix' of git://git./linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Revert WQ_SYSFS change that broke reencryption (and all other
functionality that requires reloading a dm-crypt DM table)"
* tag 'for-5.11/dm-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
Revert "dm crypt: export sysfs of kcryptd workqueue"
Mike Snitzer [Mon, 28 Dec 2020 21:13:52 +0000 (16:13 -0500)]
Revert "dm crypt: export sysfs of kcryptd workqueue"
This reverts commit
a2b8b2d975673b1a50ab0bcce5d146b9335edfad.
WQ_SYSFS breaks the ability to reload a DM table due to sysfs kobject
collision (due to active and inactive table). Given lack of
demonstrated need for exposing this workqueue via sysfs: revert
exposing it.
Reported-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ilya Dryomov [Wed, 16 Dec 2020 17:40:05 +0000 (18:40 +0100)]
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
Avoid -Wunused-const-variable warnings for "make W=1".
Reported-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Tue, 15 Dec 2020 15:49:07 +0000 (16:49 +0100)]
libceph: align session_key and con_secret to 16 bytes
crypto_shash_setkey() and crypto_aead_setkey() will do a (small)
GFP_ATOMIC allocation to align the key if it isn't suitably aligned.
It's not a big deal, but at the same time easy to avoid.
The actual alignment requirement is dynamic, queryable with
crypto_shash_alignmask() and crypto_aead_alignmask(), but shouldn't
be stricter than 16 bytes for our algorithms.
Fixes:
cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Tue, 15 Dec 2020 15:40:59 +0000 (16:40 +0100)]
libceph: fix auth_signature buffer allocation in secure mode
auth_signature frame is 68 bytes in plain mode and 96 bytes in
secure mode but we are requesting 68 bytes in both modes. By luck,
this doesn't actually result in any invalid memory accesses because
the allocation is satisfied out of kmalloc-96 slab and so exactly
96 bytes are allocated, but KASAN rightfully complains.
Fixes:
cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)")
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ilya Dryomov [Wed, 16 Dec 2020 16:19:58 +0000 (17:19 +0100)]
ceph: reencode gid_list when reconnecting
On reconnect, cap and dentry releases are dropped and the fields
that follow must be reencoded into the freed space. Currently these
are timestamp and gid_list, but gid_list isn't reencoded. This
results in
failed to decode message of type 24 v4: End of buffer
errors on the MDS.
While at it, make a change to encode gid_list unconditionally,
without regard to what head/which version was used as a result
of checking whether CEPH_FEATURE_FS_BTIME is supported or not.
URL: https://tracker.ceph.com/issues/48618
Fixes:
4f1ddb1ea874 ("ceph: implement updated ceph_mds_request_head structure")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>