net/mlx5: E-Switch, Change mode lock from mutex to rw semaphore

[ Upstream commit c55479d0cb6a28029844d0e90730704a0fb5efd3 ]

E-Switch mode change routine will take the write lock to prevent any
consumer to access the E-Switch resources while E-Switch is going
through a mode change.

In the next patch
E-Switch consumers (e.g vport representors) will take read_lock prior to
accessing E-Switch resources to prevent E-Switch mode changing in the
middle of the operation.

Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5: Lag, update tracker when state change event received

[ Upstream commit ae396d85c01c7bdc9eeceecde1f493d03f793465 ]

Currently, In NETDEV_CHANGELOWERSTATE/NETDEV_CHANGEUPPERSTATE events
handling, tracking is not fully completed if the LAG device is not ready
at the time the events occur. But, we must keep track of the upper and
lower states after receiving the events because RoCE needs this info in
mlx5_lag_get_roce_netdev() - in order to return the corresponding port
that its running on. Returning the wrong (not most recent) port will lead
to gids table being incorrect.

For example: If during the attachment of a slave to the bond, the other
non-attached port performs pci_reload, then the LAG device is not ready,
but that should not result in dismissing attached slave tracker update
automatically (which is performed in mlx5_handle_changelowerstate()), Since
these events might not come later, which can lead to both bond ports
having tx_enabled=0 - which is not a valid state of LAG bond.

Fixes: 9b412cc35f00 ("net/mlx5e: Add LAG warning if bond slave is not lag master")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/mlx5e: nullify cq->dbg pointer in mlx5_debug_cq_remove()

[ Upstream commit 76ded29d3fcda4928da8849ffc446ea46871c1c2 ]

Prior to this patch in case mlx5_core_destroy_cq() failed it proceeds
to rest of destroy operations. mlx5_core_destroy_cq() could be called again
by user and cause additional call of mlx5_debug_cq_remove().
cq->dbg was not nullify in previous call and cause the crash.

Fix it by nullify cq->dbg pointer after removal.

Also proceed to destroy operations only if FW return 0
for MLX5_CMD_OP_DESTROY_CQ command.

general protection fault, probably for non-canonical address 0x2000300004058: 0000 [#1] SMP PTI
CPU: 5 PID: 1228 Comm: python Not tainted 5.15.0-rc5_for_upstream_min_debug_2021_10_14_11_06 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:lockref_get+0x1/0x60
Code: 5d e9 53 ff ff ff 48 8d 7f 70 e8 0a 2e 48 00 c7 85 d0 00 00 00 02
00 00 00 c6 45 70 00 fb 5d c3 c3 cc cc cc cc cc cc cc cc 53 <48> 8b 17
48 89 fb 85 d2 75 3d 48 89 d0 bf 64 00 00 00 48 89 c1 48
RSP: 0018:ffff888137dd7a38 EFLAGS: 00010206
RAX: 0000000000000000 RBX: ffff888107d5f458 RCX: 00000000fffffffe
RDX: 000000000002c2b0 RSI: ffffffff8155e2e0 RDI: 0002000300004058
RBP: ffff888137dd7a88 R08: 0002000300004058 R09: ffff8881144a9f88
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881141d4000
R13: ffff888137dd7c68 R14: ffff888137dd7d58 R15: ffff888137dd7cc0
FS:  00007f4644f2a4c0(0000) GS:ffff8887a2d40000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055b4500f4380 CR3: 0000000114f7a003 CR4: 0000000000170ea0
Call Trace:
  simple_recursive_removal+0x33/0x2e0
  ? debugfs_remove+0x60/0x60
  debugfs_remove+0x40/0x60
  mlx5_debug_cq_remove+0x32/0x70 [mlx5_core]
  mlx5_core_destroy_cq+0x41/0x1d0 [mlx5_core]
  devx_obj_cleanup+0x151/0x330 [mlx5_ib]
  ? __pollwait+0xd0/0xd0
  ? xas_load+0x5/0x70
  ? xa_load+0x62/0xa0
  destroy_hw_idr_uobject+0x20/0x80 [ib_uverbs]
  uverbs_destroy_uobject+0x3b/0x360 [ib_uverbs]
  uobj_destroy+0x54/0xa0 [ib_uverbs]
  ib_uverbs_cmd_verbs+0xaf2/0x1160 [ib_uverbs]
  ? uverbs_finalize_object+0xd0/0xd0 [ib_uverbs]
  ib_uverbs_ioctl+0xc4/0x1b0 [ib_uverbs]
  __x64_sys_ioctl+0x3e4/0x8e0

Fixes: 94b960b9deff ("net/mlx5e: Fix memory leak in mlx5_core_destroy_cq() error path")
Signed-off-by: Valentine Fatiev <valentinef@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: hp_accel: Fix an error handling path in 'lis3lv02d_probe()'

[ Upstream commit c961a7d2aa23ae19e0099fbcdf1040fb760eea83 ]

If 'led_classdev_register()' fails, some additional resources should be
released.

Add the missing 'i8042_remove_filter()' and 'lis3lv02d_remove_fs()' calls
that are already in the remove function but are missing here.

Fixes: a4c724d0723b ("platform: hp_accel: add a i8042 filter to remove HPQ6000 data from kb bus stream")
Fixes: 9e0c79782143 ("lis3lv02d: merge with leds hp disk")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5a4f218f8f16d2e3a7906b7ca3654ffa946895f8.1636314074.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: lantiq: add support for clk_get_parent()

[ Upstream commit fc1aabb088860d6cf9dd03612b7a6f0de91ccac2 ]

Provide a simple implementation of clk_get_parent() in the
lantiq subarch so that callers of it will build without errors.

Fixes this build error:
ERROR: modpost: "clk_get_parent" [drivers/iio/adc/ingenic-adc.ko] undefined!

Fixes: 171bb2f19ed6 ("MIPS: Lantiq: Add initial support for Lantiq SoCs")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: linux-mips@vger.kernel.org
Cc: John Crispin <john@phrozen.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: linux-iio@vger.kernel.org
Cc: Russell King <linux@armlinux.org.uk>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: bcm63xx: add support for clk_get_parent()

[ Upstream commit e8f67482e5a4bc8d0b65d606d08cb60ee123b468 ]

BCM63XX selects HAVE_LEGACY_CLK but does not provide/support
clk_get_parent(), so add a simple implementation of that
function so that callers of it will build without errors.

Fixes these build errors:

mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4770_adc_init_clk_div':
ingenic-adc.c:(.text+0xe4): undefined reference to `clk_get_parent'
mips-linux-ld: drivers/iio/adc/ingenic-adc.o: in function `jz4725b_adc_init_clk_div':
ingenic-adc.c:(.text+0x1b8): undefined reference to `clk_get_parent'

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs." )
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Artur Rojek <contact@artur-rojek.eu>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: linux-mips@vger.kernel.org
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: linux-iio@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: generic/yamon-dt: fix uninitialized variable error

[ Upstream commit 255e51da15baed47531beefd02f222e4dc01f1c1 ]

In the case where fw_getenv returns an error when fetching values
for ememsizea and memsize then variable phys_memsize is not assigned
a variable and will be uninitialized on a zero check of phys_memsize.
Fix this by initializing phys_memsize to zero.

Cleans up cppcheck error:
arch/mips/generic/yamon-dt.c:100:7: error: Uninitialized variable: phys_memsize [uninitvar]

Fixes: f41d2430bbd6 ("MIPS: generic/yamon-dt: Support > 256MB of RAM")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix for setting queues to 0

[ Upstream commit 9a6e9e483a9684a34573fd9f9e30ecfb047cb8cb ]

Now setting combine to 0 will be rejected with the
appropriate error code.
This has been implemented by adding a condition that checks
the value of combine equal to zero.
Without this patch, when the user requested it, no error was
returned and combine was set to the default value for VF.

Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix for the false positive ASQ/ARQ errors while issuing VF reset

[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]

While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.

Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: validate pointers

[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]

In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.

Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: prevent accidental free of filter structure

[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]

In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.

In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.

This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.

Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.

Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix failure to exit out from last all-multicast mode

[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]

The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore

Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: free q_vectors before queues in iavf_disable_vf

[ Upstream commit 89f22f129696ab53cfbc608e0a2184d0fea46ac1 ]

iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.

Fixes: 65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: check for null in iavf_fix_features

[ Upstream commit 8a4a126f4be88eb8b5f00a165ab58c35edf4ef76 ]

If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.

Fixes: c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iavf: Fix return of set the new channel count

[ Upstream commit 4e5e6b5d9d1334d3490326b6922a2daaf56a867f ]

Fixed return correct code from set the new channel count.
Implemented by check if reset is done in appropriate time.
This solution give a extra time to pf for reset vf in case
when user want set new channel count for all vfs.
Without this patch it is possible to return misleading output
code to user and vf reset not to be correctly performed by pf.

Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net/smc: Make sure the link_id is unique

[ Upstream commit cf4f5530bb55ef7d5a91036b26676643b80b1616 ]

The link_id is supposed to be unique, but smcr_next_link_id() doesn't
skip the used link_id as expected. So the patch fixes this.

Fixes: 026c381fb477 ("net/smc: introduce link_idx for link group array")
Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
Reviewed-by: Tony Lu <tonylu@linux.alibaba.com>
Acked-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sock: fix /proc/net/sockstat underflow in sk_clone_lock()

[ Upstream commit 938cca9e4109b30ee1d476904538225a825e54eb ]

sk_clone_lock() needs to call sock_inuse_add(1) before entering the
sk_free_unlock_clone() error path, for __sk_free() from sk_free() from
sk_free_unlock_clone() calls sock_inuse_add(-1).

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Fixes: 648845ab7e200993 ("sock: Move the socket inuse to namespace.")
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: reduce indentation level in sk_clone_lock()

[ Upstream commit bbc20b70424aeb3c84f833860f6340adda5141fc ]

Rework initial test to jump over init code
if memory allocation has failed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210127152731.748663-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tipc: only accept encrypted MSG_CRYPTO msgs

[ Upstream commit 271351d255b09e39c7f6437738cba595f9b235be ]

The MSG_CRYPTO msgs are always encrypted and sent to other nodes
for keys' deployment. But when receiving in peers, if those nodes
do not validate it and make sure it's encrypted, one could craft
a malicious MSG_CRYPTO msg to deploy its key with no need to know
other nodes' keys.

This patch is to do that by checking TIPC_SKB_CB(skb)->decrypted
and discard it if this packet never got decrypted.

Note that this is also a supplementary fix to CVE-2021-43267 that
can be triggered by an unencrypted malicious MSG_CRYPTO msg.

Fixes: 1ef6f7c9390f ("tipc: add automatic session key exchange")
Acked-by: Ying Xue <ying.xue@windriver.com>
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bnxt_en: reject indirect blk offload when hw-tc-offload is off

[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ]

The driver does not check if hw-tc-offload is enabled for the device
before offloading a flow in the context of indirect block callback.
Fix this by checking NETIF_F_HW_TC in the features flag and rejecting
the offload request.  This will avoid unnecessary dmesg error logs when
hw-tc-offload is disabled, such as these:

bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22

Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: bnx2x: fix variable dereferenced before check

[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ]

Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)

Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.

Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: ipa: disable HOLB drop when updating timer

[ Upstream commit 816316cacad2b5abd5b41423cf04e4845239abd4 ]

The head-of-line blocking timer should only be modified when
head-of-line drop is disabled.

One of the steps in recovering from a modem crash is to enable
dropping of packets with timeout of 0 (immediate).  We don't know
how the modem configured its endpoints, so before we program the
timer, we need to ensure HOL_BLOCK is disabled.

Fixes: 84f9bd12d46db ("soc: qcom: ipa: IPA endpoints")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing: Add length protection to histogram string copies

[ Upstream commit 938aa33f14657c9ed9deea348b7d6f14b6d69cb7 ]

The string copies to the histogram storage has a max size of 256 bytes
(defined by MAX_FILTER_STR_VAL). Only the string size of the event field
needs to be copied to the event storage, but no more than what is in the
event storage. Although nothing should be bigger than 256 bytes, there's
no protection against overwriting of the storage if one day there is.

Copy no more than the destination size, and enforce it.

Also had to turn MAX_FILTER_STR_VAL into an unsigned int, to keep the
min() comparison of the string sizes of comparable types.

Link: https://lore.kernel.org/all/CAHk-=wjREUihCGrtRBwfX47y_KrLCGjiq3t6QtoNJpmVrAEb1w@mail.gmail.com/
Link: https://lkml.kernel.org/r/20211114132834.183429a4@rorschach.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Fixes: 63f84ae6b82b ("tracing/histogram: Do not copy the fixed-size char array field over the field size")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tcp: Fix uninitialized access in skb frags array for Rx 0cp.

[ Upstream commit 70701b83e208767f2720d8cd3e6a62cddafb3a30 ]

TCP Receive zerocopy iterates through the SKB queue via
tcp_recv_skb(), acquiring a pointer to an SKB and an offset within
that SKB to read from. From there, it iterates the SKB frags array to
determine which offset to start remapping pages from.

However, this is built on the assumption that the offset read so far
within the SKB is smaller than the SKB length. If this assumption is
violated, we can attempt to read an invalid frags array element, which
would cause a fault.

tcp_recv_skb() can cause such an SKB to be returned when the TCP FIN
flag is set. Therefore, we must guard against this occurrence inside
skb_advance_frag().

One way that we can reproduce this error follows:
1) In a receiver program, call getsockopt(TCP_ZEROCOPY_RECEIVE) with:
char some_array[32 * 1024];
struct tcp_zerocopy_receive zc = {
  .copybuf_address  = (__u64) &some_array[0],
  .copybuf_len = 32 * 1024,
};

2) In a sender program, after a TCP handshake, send the following
sequence of packets:
  i) Seq = [X, X+4000]
  ii) Seq = [X+4000, X+5000]
  iii) Seq = [X+4000, X+5000], Flags = FIN | URG, urgptr=1000

(This can happen without URG, if we have a signal pending, but URG is
a convenient way to reproduce the behaviour).

In this case, the following event sequence will occur on the receiver:

tcp_zerocopy_receive():
-> receive_fallback_to_copy() // copybuf_len >= inq
-> tcp_recvmsg_locked() // reads 5000 bytes, then breaks due to URG
-> tcp_recv_skb() // yields skb with skb->len == offset
-> tcp_zerocopy_set_hint_for_skb()
-> skb_advance_to_frag() // will returns a frags ptr. >= nr_frags
-> find_next_mappable_frag() // will dereference this bad frags ptr.

With this patch, skb_advance_to_frag() will no longer return an
invalid frags pointer, and will return NULL instead, fixing the issue.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive")
Link: https://lore.kernel.org/r/20211111235215.2605384-1-arjunroy.kdev@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net-zerocopy: Refactor skb frag fast-forward op.

[ Upstream commit 7fba5309efe24e4f0284ef4b8663cdf401035e72 ]

Refactor skb frag fast-forwarding for tcp receive zerocopy. This is
part of a patch set that introduces short-circuited hybrid copies
for small receive operations, which results in roughly 33% fewer
syscalls for small RPC scenarios.

skb_advance_to_frag(), given a skb and an offset into the skb,
iterates from the first frag for the skb until we're at the frag
specified by the offset. Assuming the offset provided refers to how
many bytes in the skb are already read, the returned frag points to
the next frag we may read from, while offset_frag is set to the number
of bytes from this frag that we have already read.

If frag is not null and offset_frag is equal to 0, then we may be able
to map this frag's page into the process address space with
vm_insert_page(). However, if offset_frag is not equal to 0, then we
cannot do so.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net-zerocopy: Copy straggler unaligned data for TCP Rx. zerocopy.

[ Upstream commit 18fb76ed53865c1b5d5f0157b1b825704590beb5 ]

When TCP receive zerocopy does not successfully map the entire
requested space, it outputs a 'hint' that the caller should recvmsg().

Augment zerocopy to accept a user buffer that it tries to copy this
hint into - if it is possible to copy the entire hint, it will do so.
This elides a recvmsg() call for received traffic that isn't exactly
page-aligned in size.

This was tested with RPC-style traffic of arbitrary sizes. Normally,
each received message required at least one getsockopt() call, and one
recvmsg() call for the remaining unaligned data.

With this change, almost all of the recvmsg() calls are eliminated,
leading to a savings of about 25%-50% in number of system calls
for RPC-style workloads.

Signed-off-by: Arjun Roy <arjunroy@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau: hdmigv100.c: fix corrupted HDMI Vendor InfoFrame

[ Upstream commit 3cc1ae1fa70ab369e4645e38ce335a19438093ad ]

gv100_hdmi_ctrl() writes vendor_infoframe.subpack0_high to 0x6f0110, and
then overwrites it with 0. Just drop the overwrite with 0, that's clearly
a mistake.

Because of this issue the HDMI VIC is 0 instead of 1 in the HDMI Vendor
InfoFrame when transmitting 4kp30.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 290ffeafcc1a ("drm/nouveau/disp/gv100: initial support")
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3d3bd0f7-c150-2479-9350-35d394ee772d@xs4all.nl
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tests: Remove bash construct from record+zstd_comp_decomp.sh

[ Upstream commit a9cdc1c5e3700a5200e5ca1f90b6958b6483845b ]

Commit 463538a383a2 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:

  $ ./perf test -v 85
  85: Zstd perf.data compression/decompression                        :
  --- start ---
  test child forked, pid 50643
  Collecting compressed record file:
  ./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found

Fixes: 463538a383a2 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf bench futex: Fix memory leak of perf_cpu_map__new()

[ Upstream commit 88e48238d53682281c9de2a0b65d24d3b64542a0 ]

ASan reports memory leaks while running:

  $ sudo ./perf bench futex all

The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.

Fixes: 9c3516d1b850ea93 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf bpf: Avoid memory leak from perf_env__insert_btf()

[ Upstream commit 4924b1f7c46711762fd0e65c135ccfbcfd6ded1f ]

perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.

v2. Adds a return -1 when the insertion error occurs in
    perf_env__fetch_btf. This doesn't affect anything as the result is
    never checked.

Fixes: 3792cb2ff43b1b19 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/histogram: Do not copy the fixed-size char array field over the field size

[ Upstream commit 63f84ae6b82bb4dff672f76f30c6fd7b9d3766bc ]

Do not copy the fixed-size char array field of the events over
the field size. The histogram treats char array as a string and
there are 2 types of char array in the event, fixed-size and
dynamic string. The dynamic string (__data_loc) field must be
null terminated, but the fixed-size char array field may not
be null terminated (not a string, but just a data).
In that case, histogram can copy the data after the field.
This uses the original field size for fixed-size char array
field to restrict the histogram not to access over the original
field size.

Link: https://lkml.kernel.org/r/163673292822.195747.3696966210526410250.stgit@devnote2
Fixes: 02205a6752f2 (tracing: Add support for 'field variables')
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

blkcg: Remove extra blkcg_bio_issue_init

[ Upstream commit b781d8db580c058ecd54ed7d5dde7f8270b25f5b ]

KASAN reports a use-after-free report when doing block test:

==================================================================
[10050.967049] BUG: KASAN: use-after-free in
submit_bio_checks+0x1539/0x1550

[10050.977638] Call Trace:
[10050.978190]  dump_stack+0x9b/0xce
[10050.979674]  print_address_description.constprop.6+0x3e/0x60
[10050.983510]  kasan_report.cold.9+0x22/0x3a
[10050.986089]  submit_bio_checks+0x1539/0x1550
[10050.989576]  submit_bio_noacct+0x83/0xc80
[10050.993714]  submit_bio+0xa7/0x330
[10050.994435]  mpage_readahead+0x380/0x500
[10050.998009]  read_pages+0x1c1/0xbf0
[10051.002057]  page_cache_ra_unbounded+0x4c2/0x6f0
[10051.007413]  do_page_cache_ra+0xda/0x110
[10051.008207]  force_page_cache_ra+0x23d/0x3d0
[10051.009087]  page_cache_sync_ra+0xca/0x300
[10051.009970]  generic_file_buffered_read+0xbea/0x2130
[10051.012685]  generic_file_read_iter+0x315/0x490
[10051.014472]  blkdev_read_iter+0x113/0x1b0
[10051.015300]  aio_read+0x2ad/0x450
[10051.023786]  io_submit_one+0xc8e/0x1d60
[10051.029855]  __se_sys_io_submit+0x125/0x350
[10051.033442]  do_syscall_64+0x2d/0x40
[10051.034156]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[10051.048733] Allocated by task 18598:
[10051.049482]  kasan_save_stack+0x19/0x40
[10051.050263]  __kasan_kmalloc.constprop.1+0xc1/0xd0
[10051.051230]  kmem_cache_alloc+0x146/0x440
[10051.052060]  mempool_alloc+0x125/0x2f0
[10051.052818]  bio_alloc_bioset+0x353/0x590
[10051.053658]  mpage_alloc+0x3b/0x240
[10051.054382]  do_mpage_readpage+0xddf/0x1ef0
[10051.055250]  mpage_readahead+0x264/0x500
[10051.056060]  read_pages+0x1c1/0xbf0
[10051.056758]  page_cache_ra_unbounded+0x4c2/0x6f0
[10051.057702]  do_page_cache_ra+0xda/0x110
[10051.058511]  force_page_cache_ra+0x23d/0x3d0
[10051.059373]  page_cache_sync_ra+0xca/0x300
[10051.060198]  generic_file_buffered_read+0xbea/0x2130
[10051.061195]  generic_file_read_iter+0x315/0x490
[10051.062189]  blkdev_read_iter+0x113/0x1b0
[10051.063015]  aio_read+0x2ad/0x450
[10051.063686]  io_submit_one+0xc8e/0x1d60
[10051.064467]  __se_sys_io_submit+0x125/0x350
[10051.065318]  do_syscall_64+0x2d/0x40
[10051.066082]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

[10051.067455] Freed by task 13307:
[10051.068136]  kasan_save_stack+0x19/0x40
[10051.068931]  kasan_set_track+0x1c/0x30
[10051.069726]  kasan_set_free_info+0x1b/0x30
[10051.070621]  __kasan_slab_free+0x111/0x160
[10051.071480]  kmem_cache_free+0x94/0x460
[10051.072256]  mempool_free+0xd6/0x320
[10051.072985]  bio_free+0xe0/0x130
[10051.073630]  bio_put+0xab/0xe0
[10051.074252]  bio_endio+0x3a6/0x5d0
[10051.074984]  blk_update_request+0x590/0x1370
[10051.075870]  scsi_end_request+0x7d/0x400
[10051.076667]  scsi_io_completion+0x1aa/0xe50
[10051.077503]  scsi_softirq_done+0x11b/0x240
[10051.078344]  blk_mq_complete_request+0xd4/0x120
[10051.079275]  scsi_mq_done+0xf0/0x200
[10051.080036]  virtscsi_vq_done+0xbc/0x150
[10051.080850]  vring_interrupt+0x179/0x390
[10051.081650]  __handle_irq_event_percpu+0xf7/0x490
[10051.082626]  handle_irq_event_percpu+0x7b/0x160
[10051.083527]  handle_irq_event+0xcc/0x170
[10051.084297]  handle_edge_irq+0x215/0xb20
[10051.085122]  asm_call_irq_on_stack+0xf/0x20
[10051.085986]  common_interrupt+0xae/0x120
[10051.086830]  asm_common_interrupt+0x1e/0x40

==================================================================

Bio will be checked at beginning of submit_bio_noacct(). If bio needs
to be throttled, it will start the timer and stop submit bio directly.
Bio will submit in blk_throtl_dispatch_work_fn() when the timer expires.
But in the current process, if bio is throttled, it will still set bio
issue->value by blkcg_bio_issue_init(). This is redundant and may cause
the above use-after-free.

CPU0                                   CPU1
submit_bio
submit_bio_noacct
  submit_bio_checks
    blk_throtl_bio()
      <=mod_timer(&sq->pending_timer
                                      blk_throtl_dispatch_work_fn
                                        submit_bio_noacct() <= bio have
                                        throttle tag, will throw directly
                                        and bio issue->value will be set
                                        here

                                      bio_endio()
                                      bio_put()
                                      bio_free() <= free this bio

    blkcg_bio_issue_init(bio)
      <= bio has been freed and
      will lead to UAF
  return BLK_QC_T_NONE

Fix this by remove extra blkcg_bio_issue_init.

Fixes: e439bedf6b24 (blkcg: consolidate bio_issue_init() to be a part of core)
Signed-off-by: Laibin Qiu <qiulaibin@huawei.com>
Link: https://lore.kernel.org/r/20211112093354.3581504-1-qiulaibin@huawei.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/x86/vlbr: Add c->flags to vlbr event constraints

[ Upstream commit 5863702561e625903ec678551cb056a4b19e0b8a ]

Just like what we do in the x86_get_event_constraints(), the
PERF_X86_EVENT_LBR_SELECT flag should also be propagated
to event->hw.flags so that the host lbr driver can save/restore
MSR_LBR_SELECT for the special vlbr event created by KVM or BPF.

Fixes: 097e4311cda9 ("perf/x86: Add constraint to create guest LBR event without hw counter")
Reported-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Wanpeng Li <wanpengli@tencent.com>
Link: https://lore.kernel.org/r/20211103091716.59906-1-likexu@tencent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()

[ Upstream commit 42dc938a590c96eeb429e1830123fef2366d9c80 ]

Nothing protects the access to the per_cpu variable sd_llc_id. When testing
the same CPU (i.e. this_cpu == that_cpu), a race condition exists with
update_top_cache_domain(). One scenario being:

              CPU1                            CPU2
  ==================================================================

  per_cpu(sd_llc_id, CPUX) => 0
                                    partition_sched_domains_locked()
             detach_destroy_domains()
  cpus_share_cache(CPUX, CPUX)          update_top_cache_domain(CPUX)
    per_cpu(sd_llc_id, CPUX) => 0
                                          per_cpu(sd_llc_id, CPUX) = CPUX
    per_cpu(sd_llc_id, CPUX) => CPUX
    return false

ttwu_queue_cond() wouldn't catch smp_processor_id() == cpu and the result
is a warning triggered from ttwu_queue_wakelist().

Avoid a such race in cpus_share_cache() by always returning true when
this_cpu == that_cpu.

Fixes: 518cd6234178 ("sched: Only queue remote wakeups when crossing cache boundaries")
Reported-by: Jing-Ting Wu <jing-ting.wu@mediatek.com>
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20211104175120.857087-1-vincent.donnefort@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mips: BCM63XX: ensure that CPU_SUPPORTS_32BIT_KERNEL is set

[ Upstream commit 5eeaafc8d69373c095e461bdb39e5c9b62228ac5 ]

Several header files need info on CONFIG_32BIT or CONFIG_64BIT,
but kconfig symbol BCM63XX does not provide that info. This leads
to many build errors, e.g.:

   arch/mips/include/asm/page.h:196:13: error: use of undeclared identifier 'CAC_BASE'
           return x - PAGE_OFFSET + PHYS_OFFSET;
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)
   arch/mips/include/asm/io.h:134:28: error: use of undeclared identifier 'CAC_BASE'
           return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
   arch/mips/include/asm/mach-generic/spaces.h:91:23: note: expanded from macro 'PAGE_OFFSET'
   #define PAGE_OFFSET             (CAC_BASE + PHYS_OFFSET)

arch/mips/include/asm/uaccess.h:82:10: error: use of undeclared identifier '__UA_LIMIT'
           return (__UA_LIMIT & (addr | (addr + size) | __ua_size(size))) == 0;

Selecting the SYS_HAS_CPU_BMIPS* symbols causes SYS_HAS_CPU_BMIPS to be
set, which then selects CPU_SUPPORT_32BIT_KERNEL, which causes
CONFIG_32BIT to be set. (a bit more indirect than v1 [RFC].)

Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: linux-mips@vger.kernel.org
Cc: Paul Burton <paulburton@kernel.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Ralf Baechle <ralf@linux-mips.org>
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: qcom: gcc-msm8996: Drop (again) gcc_aggre1_pnoc_ahb_clk

[ Upstream commit 05cf3ec00d460b50088d421fb878a0f83f57e262 ]

The gcc_aggre1_pnoc_ahb_clk is crucial for the proper MSM8996/APQ8096
functioning. If it gets disabled, several subsytems will stop working
(including eMMC/SDCC and USB). There are no in-kernel users of this
clock, so it is much simpler to remove from the kernel.

The clock was first removed in the commit 9e60de1cf270 ("clk: qcom:
Remove gcc_aggre1_pnoc_ahb_clk from msm8996") by Stephen Boyd, but got
added back in the commit b567752144e3 ("clk: qcom: Add some missing gcc
clks for msm8996") by Rajendra Nayak.

Let's remove it again in hope that nobody adds it back.

Reported-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Cc: Rajendra Nayak <rnayak@codeaurora.org>
Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Fixes: b567752144e3 ("clk: qcom: Add some missing gcc clks for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20211104011155.2209654-1-dmitry.baryshkov@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk/ast2600: Fix soc revision for AHB

[ Upstream commit f45c5b1c27293f834682e89003f88b3512329ab4 ]

Move the soc revision parsing to the initial probe, saving the driver
from parsing the register multiple times.

Use this variable to select the correct divisor table for the AHB clock.
Before this fix the A2 would have used the A0 table.

Fixes: 2d491066ccd4 ("clk: ast2600: Fix AHB clock divider for A1")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210922235449.213631-1-joel@jms.id.au
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: ingenic: Fix bugs with divided dividers

[ Upstream commit ed84ef1cd7eddf933d4ffce2caa8161d6f947245 ]

Two fixes in one:

- In the "impose hardware constraints" block, the "logical" divider
  value (aka. not translated to the hardware) was clamped to fit in the
  register area, but this totally ignored the fact that the divider
  value can itself have a fixed divider.

- The code that made sure that the divider value returned by the
  function was a multiple of its own fixed divider could result in a
  wrong value being calculated, because it was rounded down instead of
  rounded up.

Fixes: 4afe2d1a6ed5 ("clk: ingenic: Allow divider value to be divided")
Co-developed-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20211001172033.122329-1-paul@crapouillou.net
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix incorrect return value in f2fs_sanity_check_ckpt()

[ Upstream commit ca98d72141dd81f42893a9a43d7ededab3355fba ]

As Pavel Machek reported in [1]

This code looks quite confused: part of function returns 1 on
corruption, part returns -errno. The problem is not stable-specific.

[1] https://lkml.org/lkml/2021/9/19/207

Let's fix to make 'insane cp_payload case' to return 1 rater than
EFSCORRUPTED, so that return value can be kept consistent for all
error cases, it can avoid confusion of code logic.

Fixes: 65ddf6564843 ("f2fs: fix to do sanity check for sb/cp fields correctly")
Reported-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: compress: disallow disabling compress on non-empty compressed file

[ Upstream commit 02d58cd253d7536c412993573fc6b3b4454960eb ]

Compresse file and normal file has differ in i_addr addressing,
specifically addrs per inode/block. So, we will face data loss, if we
disable the compression flag on non-empty files. Therefore we should
disallow not only enabling but disabling the compression flag on
non-empty files.

Fixes: 4c8ff7095bef ("f2fs: support data compression")
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Hyeong-Jun Kim <hj514.kim@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: define __BIG_ENDIAN for math-emu

[ Upstream commit b929926f01f2d14635345d22eafcf60feed1085e ]

Fix this by defining both ENDIAN macros in
<asm/sfp-machine.h> so that they can be utilized in
<math-emu/soft-fp.h> according to the latter's comment:
/* Allow sfp-machine to have its own byte order definitions. */

(This is what is done in arch/nds32/include/asm/sfp-machine.h.)

This placates these build warnings:

In file included from ../arch/sh/math-emu/math.c:23:
.../include/math-emu/single.h:50:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
   50 | #if __BYTE_ORDER == __BIG_ENDIAN
In file included from ../arch/sh/math-emu/math.c:24:
.../include/math-emu/double.h:59:21: warning: "__BIG_ENDIAN" is not defined, evaluates to 0 [-Wundef]
   59 | #if __BYTE_ORDER == __BIG_ENDIAN

Fixes: 4b565680d163 ("sh: math-emu support")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: math-emu: drop unused functions

[ Upstream commit e25c252a9b033523c626f039d4b9a304f12f6775 ]

Delete ieee_fpe_handler() since it is not used. After that is done,
delete denormal_to_double() since it is not used:

.../arch/sh/math-emu/math.c:505:12: error: 'ieee_fpe_handler' defined but not used [-Werror=unused-function]
  505 | static int ieee_fpe_handler(struct pt_regs *regs)

.../arch/sh/math-emu/math.c:477:13: error: 'denormal_to_double' defined but not used [-Werror=unused-function]
  477 | static void denormal_to_double(struct sh_fpu_soft_struct *fpu, int n)

Fixes: 7caf62de25554da3 ("sh: remove unused do_fpu_error")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Takashi YOSHII <takasi-y@ops.dti.ne.jp>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: fix kconfig unmet dependency warning for FRAME_POINTER

[ Upstream commit fda1bc533094a7db68b11e7503d2c6c73993d12a ]

FRAME_POINTER depends on DEBUG_KERNEL so DWARF_UNWINDER should
depend on DEBUG_KERNEL before selecting FRAME_POINTER.

WARNING: unmet direct dependencies detected for FRAME_POINTER
  Depends on [n]: DEBUG_KERNEL [=n] && (M68K || UML || SUPERH [=y]) || ARCH_WANT_FRAME_POINTERS [=n]
  Selected by [y]:
  - DWARF_UNWINDER [=y]

Fixes: bd353861c735 ("sh: dwarf unwinder support.")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matt Fleming <matt@console-pimps.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix to use WHINT_MODE

[ Upstream commit 011e0868e0cf1237675b22e36fffa958fb08f46e ]

Since active_logs can be set to 2 or 4 or NR_CURSEG_PERSIST_TYPE(6),
it cannot be set to NR_CURSEG_TYPE(8).
That is, whint_mode is always off.

Therefore, the condition is changed from NR_CURSEG_TYPE to NR_CURSEG_PERSIST_TYPE.

Cc: Chao Yu <chao@kernel.org>
Fixes: d0b9e42ab615 (f2fs: introduce inmem curseg)
Reported-by: tanghuan <tanghuan@vivo.com>
Signed-off-by: Keoseong Park <keosung.park@samsung.com>
Signed-off-by: Fengnan Chang <changfengnan@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: fix up f2fs_lookup tracepoints

[ Upstream commit 70a9ac36ffd807ac506ed0b849f3e8ce3c6623f2 ]

Fix up a misuse that the filename pointer isn't always valid in
the ring buffer, and we should copy the content instead.

Fixes: 0c5e36db17f5 ("f2fs: trace f2fs_lookup")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

maple: fix wrong return value of maple_bus_init().

[ Upstream commit bde82ee391fa6d3ad054313c4aa7b726d32515ce ]

If KMEM_CACHE or maple_alloc_dev failed, the maple_bus_init() will return 0
rather than error, because the retval is not changed after KMEM_CACHE or
maple_alloc_dev failed.

Fixes: 17be2d2b1c33 ("sh: Add maple bus support for the SEGA Dreamcast.")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Lu Wei <luwei32@huawei.com>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: check return code of request_irq

[ Upstream commit 0e38225c92c7964482a8bb6b3e37fde4319e965c ]

request_irq is marked __must_check, but the call in shx3_prepare_cpus
has a void return type, so it can't propagate failure to the caller.
Follow cues from hexagon and just print an error.

Fixes: c7936b9abcf5 ("sh: smp: Hook in to the generic IPI handler for SH-X3 SMP.")
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/8xx: Fix Oops with STRICT_KERNEL_RWX without DEBUG_RODATA_TEST

[ Upstream commit c12ab8dbc492b992e1ea717db933cee568780c47 ]

Until now, all tests involving CONFIG_STRICT_KERNEL_RWX were done with
DEBUG_RODATA_TEST to check the result. But now that
CONFIG_STRICT_KERNEL_RWX is selected by default, it came without
CONFIG_DEBUG_RODATA_TEST and led to the following Oops

[    6.830908] Freeing unused kernel image (initmem) memory: 352K
[    6.840077] BUG: Unable to handle kernel data access on write at 0xc1285200
[    6.846836] Faulting instruction address: 0xc0004b6c
[    6.851745] Oops: Kernel access of bad area, sig: 11 [#1]
[    6.857075] BE PAGE_SIZE=16K PREEMPT CMPC885
[    6.861348] SAF3000 DIE NOTIFICATION
[    6.864830] CPU: 0 PID: 1 Comm: swapper Not tainted 5.15.0-rc5-s3k-dev-02255-g2747d7b7916f #451
[    6.873429] NIP:  c0004b6c LR: c0004b60 CTR: 00000000
[    6.878419] REGS: c902be60 TRAP: 0300   Not tainted  (5.15.0-rc5-s3k-dev-02255-g2747d7b7916f)
[    6.886852] MSR:  00009032 <EE,ME,IR,DR,RI>  CR: 53000335  XER: 8000ff40
[    6.893564] DAR: c1285200 DSISR: 82000000
[    6.893564] GPR00: 0c000000 c902bf20 c20f4000 08000000 00000001 04001f00 c1800000 00000035
[    6.893564] GPR08: ff0001ff c1280000 00000002 c0004b60 00001000 00000000 c0004b1c 00000000
[    6.893564] GPR16: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[    6.893564] GPR24: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 c1060000
[    6.932034] NIP [c0004b6c] kernel_init+0x50/0x138
[    6.936682] LR [c0004b60] kernel_init+0x44/0x138
[    6.941245] Call Trace:
[    6.943653] [c902bf20] [c0004b60] kernel_init+0x44/0x138 (unreliable)
[    6.950022] [c902bf30] [c001122c] ret_from_kernel_thread+0x5c/0x64
[    6.956135] Instruction dump:
[    6.959060] 48ffc521 48045469 4800d8cd 3d20c086 89295fa0 2c090000 41820058 480796c9
[    6.966890] 4800e48d 3d20c128 39400002 3fe0c106 <91495200> 3bff8000 4806fa1d 481f7d75
[    6.974902] ---[ end trace 1e397bacba4aa610 ]---

0xc1285200 corresponds to 'system_state' global var that the kernel is trying to set to
SYSTEM_RUNNING. This var is above the RO/RW limit so it shouldn't Oops.

It oopses because the dirty bit is missing.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/3d5800b0bbcd7b19761b98f50421358667b45331.1635520232.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/dcr: Use cmplwi instead of 3-argument cmpli

[ Upstream commit fef071be57dc43679a32d5b0e6ee176d6f12e9f2 ]

In dcr-low.S we use cmpli with three arguments, instead of four
arguments as defined in the ISA:

cmpli cr0,r3,1024

This appears to be a PPC440-ism, looking at the "PPC440x5 CPU Core
User’s Manual" it shows cmpli having no L field, but implied to be 0 due
to the core being 32-bit. It mentions that the ISA defines four
arguments and recommends using cmplwi.

It also corresponds to the old POWER instruction set, which had no L
field there, a reserved bit instead.

dcr-low.S is only built 32-bit, because it is only built when
DCR_NATIVE=y, which is only selected by 40x and 44x. Looking at the
generated code (with gcc/gas) we see cmplwi as expected.

Although gas is happy with the 3-argument version when building for
32-bit, the LLVM assembler is not and errors out with:

  arch/powerpc/sysdev/dcr-low.S:27:10: error: invalid operand for instruction
   cmpli 0,%r3,1024; ...
           ^

Switch to the cmplwi extended opcode, which avoids any confusion when
reading the ISA, fixes the issue with the LLVM assembler, and also means
the code could be built 64-bit in future (though that's very unlikely).

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
BugLink: https://github.com/ClangBuiltLinux/linux/issues/1419
Link: https://lore.kernel.org/r/20211014024424.528848-1-mpe@ellerman.id.au
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: gus: fix null pointer dereference on pointer block

[ Upstream commit a0d21bb3279476c777434c40d969ea88ca64f9aa ]

The pointer block return from snd_gf1_dma_next_block could be
null, so there is a potential null pointer dereference issue.
Fix this by adding a null check before dereference.

Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Link: https://lore.kernel.org/r/20211024104611.9919-1-cyeaa@connect.ust.hk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: qcom: fix memory and mdio nodes naming for RB3011

[ Upstream commit 14a1f6c9d8017ffbf388e82e1a1f023196d98612 ]

Fixes warnings regarding to memory and mdio nodes and
apply new naming following dt-schema.

Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/5200: dts: fix memory node unit name

[ Upstream commit aed2886a5e9ffc8269a4220bff1e9e030d3d2eb1 ]

Fixes build warnings:
Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211013220532.24759-4-agust@denx.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: imu: st_lsm6dsx: Avoid potential array overflow in st_lsm6dsx_set_odr()

[ Upstream commit 94be878c882d8d784ff44c639bf55f3b029f85af ]

The length of hw->settings->odr_table is 2 and ref_sensor->id is an enum
variable whose value is between 0 and 5.
However, the value ST_LSM6DSX_ID_MAX (i.e. 5) is not caught properly in
 switch (sensor->id) {

If ref_sensor->id is ST_LSM6DSX_ID_MAX, an array overflow will ocurrs in
function st_lsm6dsx_check_odr():
  odr_table = &sensor->hw->settings->odr_table[sensor->id];

and in function st_lsm6dsx_set_odr():
  reg = &hw->settings->odr_table[ref_sensor->id].reg;

To avoid this array overflow, handle ST_LSM6DSX_ID_GYRO explicitly and
return -EINVAL for the default case.

The enum value ST_LSM6DSX_ID_MAX is only present as an easy way to check
the limit and as such is never used, however this is not locally obvious.

Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Teng Qi <starmiku1207184332@gmail.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://lore.kernel.org/r/20211011114003.976221-1-starmiku1207184332@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix alua_tg_pt_gps_count tracking

[ Upstream commit 1283c0d1a32bb924324481586b5d6e8e76f676ba ]

We can't free the tg_pt_gp in core_alua_set_tg_pt_gp_id() because it's
still accessed via configfs. Its release must go through the normal
configfs/refcount process.

The max alua_tg_pt_gps_count check should probably have been done in
core_alua_allocate_tg_pt_gp(), but with the current code userspace could
have created 0x0000ffff + 1 groups, but only set the id for 0x0000ffff.
Then it could have deleted a group with an ID set, and then set the ID for
that extra group and it would work ok.

It's unlikely, but just in case this patch continues to allow that type of
behavior, and just fixes the kfree() while in use bug.

Link: https://lore.kernel.org/r/20210930020422.92578-4-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: target: Fix ordered tag handling

[ Upstream commit ed1227e080990ffec5bf39006ec8a57358e6689a ]

This patch fixes the following bugs:

1. If there are multiple ordered cmds queued and multiple simple cmds
   completing, target_restart_delayed_cmds() could be called on different
   CPUs and each instance could start a ordered cmd. They could then run in
   different orders than they were queued.

2. target_restart_delayed_cmds() and target_handle_task_attr() can race
   where:

   1. target_handle_task_attr() has passed the simple_cmds == 0 check.

   2. transport_complete_task_attr() then decrements simple_cmds to 0.

   3. transport_complete_task_attr() runs target_restart_delayed_cmds() and
      it does not see any cmds on the delayed_cmd_list.

   4. target_handle_task_attr() adds the cmd to the delayed_cmd_list.

   The cmd will then end up timing out.

3. If we are sent > 1 ordered cmds and simple_cmds == 0, we can execute
   them out of order, because target_handle_task_attr() will hit that
   simple_cmds check first and return false for all ordered cmds sent.

4. We run target_restart_delayed_cmds() after every cmd completion, so if
   there is more than 1 simple cmd running, we start executing ordered cmds
   after that first cmd instead of waiting for all of them to complete.

5. Ordered cmds are not supposed to start until HEAD OF QUEUE and all older
   cmds have completed, and not just simple.

6. It's not a bug but it doesn't make sense to take the delayed_cmd_lock
   for every cmd completion when ordered cmds are almost never used. Just
   replacing that lock with an atomic increases IOPs by up to 10% when
   completions are spread over multiple CPUs and there are multiple
   sessions/ mqs/thread accessing the same device.

This patch moves the queued delayed handling to a per device work to
serialze the cmd executions for each device and adds a new counter to track
HEAD_OF_QUEUE and SIMPLE cmds. We can then check the new counter to
determine when to run the work on the completion path.

Link: https://lore.kernel.org/r/20210930020422.92578-3-michael.christie@oracle.com
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix out-of-bound read in resp_report_tgtpgs()

[ Upstream commit f347c26836c270199de1599c3cd466bb7747caa9 ]

The following issue was observed running syzkaller:

BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:377 [inline]
BUG: KASAN: slab-out-of-bounds in sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
Read of size 2132 at addr ffff8880aea95dc8 by task syz-executor.0/9815

CPU: 0 PID: 9815 Comm: syz-executor.0 Not tainted 4.19.202-00874-gfc0fe04215a9 #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xe4/0x14a lib/dump_stack.c:118
 print_address_description+0x73/0x280 mm/kasan/report.c:253
 kasan_report_error mm/kasan/report.c:352 [inline]
 kasan_report+0x272/0x370 mm/kasan/report.c:410
 memcpy+0x1f/0x50 mm/kasan/kasan.c:302
 memcpy include/linux/string.h:377 [inline]
 sg_copy_buffer+0x150/0x1c0 lib/scatterlist.c:831
 fill_from_dev_buffer+0x14f/0x340 drivers/scsi/scsi_debug.c:1021
 resp_report_tgtpgs+0x5aa/0x770 drivers/scsi/scsi_debug.c:1772
 schedule_resp+0x464/0x12f0 drivers/scsi/scsi_debug.c:4429
 scsi_debug_queuecommand+0x467/0x1390 drivers/scsi/scsi_debug.c:5835
 scsi_dispatch_cmd+0x3fc/0x9b0 drivers/scsi/scsi_lib.c:1896
 scsi_request_fn+0x1042/0x1810 drivers/scsi/scsi_lib.c:2034
 __blk_run_queue_uncond block/blk-core.c:464 [inline]
 __blk_run_queue+0x1a4/0x380 block/blk-core.c:484
 blk_execute_rq_nowait+0x1c2/0x2d0 block/blk-exec.c:78
 sg_common_write.isra.19+0xd74/0x1dc0 drivers/scsi/sg.c:847
 sg_write.part.23+0x6e0/0xd00 drivers/scsi/sg.c:716
 sg_write+0x64/0xa0 drivers/scsi/sg.c:622
 __vfs_write+0xed/0x690 fs/read_write.c:485
kill_bdev:block_device:00000000e138492c
 vfs_write+0x184/0x4c0 fs/read_write.c:549
 ksys_write+0x107/0x240 fs/read_write.c:599
 do_syscall_64+0xc2/0x560 arch/x86/entry/common.c:293
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

We get 'alen' from command its type is int. If userspace passes a large
length we will get a negative 'alen'.

Switch n, alen, and rlen to u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-3-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix out-of-bound read in resp_readcap16()

[ Upstream commit 4e3ace0051e7e504b55d239daab8789dd89b863c ]

The following warning was observed running syzkaller:

[ 3813.830724] sg_write: data in/out 65466/242 bytes for SCSI command 0x9e-- guessing data in;
[ 3813.830724]    program syz-executor not setting count and/or reply_len properly
[ 3813.836956] ==================================================================
[ 3813.839465] BUG: KASAN: stack-out-of-bounds in sg_copy_buffer+0x157/0x1e0
[ 3813.841773] Read of size 4096 at addr ffff8883cf80f540 by task syz-executor/1549
[ 3813.846612] Call Trace:
[ 3813.846995]  dump_stack+0x108/0x15f
[ 3813.847524]  print_address_description+0xa5/0x372
[ 3813.848243]  kasan_report.cold+0x236/0x2a8
[ 3813.849439]  check_memory_region+0x240/0x270
[ 3813.850094]  memcpy+0x30/0x80
[ 3813.850553]  sg_copy_buffer+0x157/0x1e0
[ 3813.853032]  sg_copy_from_buffer+0x13/0x20
[ 3813.853660]  fill_from_dev_buffer+0x135/0x370
[ 3813.854329]  resp_readcap16+0x1ac/0x280
[ 3813.856917]  schedule_resp+0x41f/0x1630
[ 3813.858203]  scsi_debug_queuecommand+0xb32/0x17e0
[ 3813.862699]  scsi_dispatch_cmd+0x330/0x950
[ 3813.863329]  scsi_request_fn+0xd8e/0x1710
[ 3813.863946]  __blk_run_queue+0x10b/0x230
[ 3813.864544]  blk_execute_rq_nowait+0x1d8/0x400
[ 3813.865220]  sg_common_write.isra.0+0xe61/0x2420
[ 3813.871637]  sg_write+0x6c8/0xef0
[ 3813.878853]  __vfs_write+0xe4/0x800
[ 3813.883487]  vfs_write+0x17b/0x530
[ 3813.884008]  ksys_write+0x103/0x270
[ 3813.886268]  __x64_sys_write+0x77/0xc0
[ 3813.886841]  do_syscall_64+0x106/0x360
[ 3813.887415]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

This issue can be reproduced with the following syzkaller log:

r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x26e1, 0x0)
r1 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000000)='fd/3\x00')
open_by_handle_at(r1, &(0x7f00000003c0)=ANY=[@ANYRESHEX], 0x602000)
r2 = syz_open_dev$sg(&(0x7f0000000000), 0x0, 0x40782)
write$binfmt_aout(r2, &(0x7f0000000340)=ANY=[@ANYBLOB="00000000deff000000000000000000000000000000000000000000000000000047f007af9e107a41ec395f1bded7be24277a1501ff6196a83366f4e6362bc0ff2b247f68a972989b094b2da4fb3607fcf611a22dd04310d28c75039d"], 0x126)

In resp_readcap16() we get "int alloc_len" value -1104926854, and then pass
the huge arr_len to fill_from_dev_buffer(), but arr is only 32 bytes. This
leads to OOB in sg_copy_buffer().

To solve this issue, define alloc_len as u32.

Link: https://lore.kernel.org/r/20211013033913.2551004-2-yebin10@huawei.com
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: sni: Fix the build

[ Upstream commit c91cf42f61dc77b289784ea7b15a8531defa41c0 ]

This patch fixes the following gcc 10 build error:

arch/mips/sni/time.c: In function ‘a20r_set_periodic’:
arch/mips/sni/time.c:15:26: error: unsigned conversion from ‘int’ to ‘u8’ {aka ‘volatile unsigned char’} changes value from ‘576’ to ‘64’ [-Werror=overflow]
   15 | #define SNI_COUNTER0_DIV ((SNI_CLOCK_TICK_RATE / SNI_COUNTER2_DIV) / HZ)
      |                          ^
arch/mips/sni/time.c:21:45: note: in expansion of macro ‘SNI_COUNTER0_DIV’
   21 |  *(volatile u8 *)(A20R_PT_CLOCK_BASE + 0) = SNI_COUNTER0_DIV;
      |                                             ^~~~~~~~~~~~~~~~

Cc: linux-mips@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: tty_buffer: Fix the softlockup issue in flush_to_ldisc

[ Upstream commit 3968ddcf05fb4b9409cd1859feb06a5b0550a1c1 ]

When running ltp testcase(ltp/testcases/kernel/pty/pty04.c) with arm64, there is a soft lockup,
which look like this one:

  Workqueue: events_unbound flush_to_ldisc
  Call trace:
   dump_backtrace+0x0/0x1ec
   show_stack+0x24/0x30
   dump_stack+0xd0/0x128
   panic+0x15c/0x374
   watchdog_timer_fn+0x2b8/0x304
   __run_hrtimer+0x88/0x2c0
   __hrtimer_run_queues+0xa4/0x120
   hrtimer_interrupt+0xfc/0x270
   arch_timer_handler_phys+0x40/0x50
   handle_percpu_devid_irq+0x94/0x220
   __handle_domain_irq+0x88/0xf0
   gic_handle_irq+0x84/0xfc
   el1_irq+0xc8/0x180
   slip_unesc+0x80/0x214 [slip]
   tty_ldisc_receive_buf+0x64/0x80
   tty_port_default_receive_buf+0x50/0x90
   flush_to_ldisc+0xbc/0x110
   process_one_work+0x1d4/0x4b0
   worker_thread+0x180/0x430
   kthread+0x11c/0x120

In the testcase pty04, The first process call the write syscall to send
data to the pty master. At the same time, the workqueue will do the
flush_to_ldisc to pop data in a loop until there is no more data left.
When the sender and workqueue running in different core, the sender sends
data fastly in full time which will result in workqueue doing work in loop
for a long time and occuring softlockup in flush_to_ldisc with kernel
configured without preempt. So I add need_resched check and cond_resched
in the flush_to_ldisc loop to avoid it.

Signed-off-by: Guanghui Feng <guanghuifeng@linux.alibaba.com>
Link: https://lore.kernel.org/r/1633961304-24759-1-git-send-email-guanghuifeng@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: ISA: not for M68K

[ Upstream commit 3c05f1477e62ea5a0a8797ba6a545b1dc751fb31 ]

On m68k, compiling drivers under SND_ISA causes build errors:

../sound/core/isadma.c: In function 'snd_dma_program':
../sound/core/isadma.c:33:17: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration]
   33 |         flags = claim_dma_lock();
      |                 ^~~~~~~~~~~~~~
../sound/core/isadma.c:41:9: error: implicit declaration of function 'release_dma_lock' [-Werror=implicit-function-declaration]
   41 |         release_dma_lock(flags);
      |         ^~~~~~~~~~~~~~~~

../sound/isa/sb/sb16_main.c: In function 'snd_sb16_playback_prepare':
../sound/isa/sb/sb16_main.c:253:72: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  253 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_WRITE | DMA_AUTOINIT);
      |                                                                        ^~~~~~~~~~~~
../sound/isa/sb/sb16_main.c:253:72: note: each undeclared identifier is reported only once for each function it appears in
../sound/isa/sb/sb16_main.c: In function 'snd_sb16_capture_prepare':
../sound/isa/sb/sb16_main.c:322:71: error: 'DMA_AUTOINIT' undeclared (first use in this function)
  322 |         snd_dma_program(dma, runtime->dma_addr, size, DMA_MODE_READ | DMA_AUTOINIT);
      |                                                                       ^~~~~~~~~~~~

and more...

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linux-m68k@lists.linux-m68k.org
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211016062602.3588-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021a-tsn: use generic "jedec,spi-nor" compatible for flash

[ Upstream commit 05e63b48b20fa70726be505a7660d1a07bc1cffb ]

We cannot list all the possible chips used in different board revisions,
just use the generic "jedec,spi-nor" compatible instead.  This also
fixes dtbs_check error:
['jedec,spi-nor', 's25fl256s1', 's25fl512s'] is too long

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ls1021a: move thermal-zones node out of soc/

[ Upstream commit 1ee1500ef717eefb5d9bdaf97905cb81b4e69aa4 ]

This fixes dtbs-check error from simple-bus schema:
soc: thermal-zones: {'type': 'object'} is not allowed for {'cpu-thermal': ..... }
        From schema: /home/leo/.local/lib/python3.8/site-packages/dtschema/schemas/simple-bus.yaml

Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: host: ohci-tmio: check return value after calling platform_get_resource()

[ Upstream commit 9eff2b2e59fda25051ab36cd1cb5014661df657b ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20211011134920.118477-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap: fix gpmc,mux-add-data type

[ Upstream commit 51b9e22ffd3c4c56cbb7caae9750f70e55ffa603 ]

gpmc,mux-add-data is not boolean.

Fixes the below errors flagged by dtbs_check.

"ethernet@4,0:gpmc,mux-add-data: True is not of type 'array'"

Signed-off-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

firmware_loader: fix pre-allocated buf built-in firmware use

[ Upstream commit f7a07f7b96033df7709042ff38e998720a3f7119 ]

The firmware_loader can be used with a pre-allocated buffer
through the use of the API calls:

  o request_firmware_into_buf()
  o request_partial_firmware_into_buf()

If the firmware was built-in and present, our current check
for if the built-in firmware fits into the pre-allocated buffer
does not return any errors, and we proceed to tell the caller
that everything worked fine. It's a lie and no firmware would
end up being copied into the pre-allocated buffer. So if the
caller trust the result it may end up writing a bunch of 0's
to a device!

Fix this by making the function that checks for the pre-allocated
buffer return non-void. Since the typical use case is when no
pre-allocated buffer is provided make this return successfully
for that case. If the built-in firmware does *not* fit into the
pre-allocated buffer size return a failure as we should have
been doing before.

I'm not aware of users of the built-in firmware using the API
calls with a pre-allocated buffer, as such I doubt this fixes
any real life issue. But you never know... perhaps some oddball
private tree might use it.

In so far as upstream is concerned this just fixes our code for
correctness.

Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210917182226.3532898-2-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec

[ Upstream commit 9d36ceab94151f07cf3fcb067213ac87937adf12 ]

These devices are based on an I2C/I2S device, we need to force the use
of the SOF driver otherwise the legacy HDaudio driver will be loaded -
only HDMI will be supported.

Co-developed-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Huajun Li <huajun.li@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211004213512.220836-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: advansys: Fix kernel pointer leak

[ Upstream commit d4996c6eac4c81b8872043e9391563f67f13e406 ]

Pointers should be printed with %p or %px rather than cast to 'unsigned
long' and printed with %lx.

Change %lx to %p to print the hashed pointer.

Link: https://lore.kernel.org/r/20210929122538.1158235-1-qtxuning1999@sjtu.edu.cn
Signed-off-by: Guo Zhi <qtxuning1999@sjtu.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: nau8824: Add DMI quirk mechanism for active-high jack-detect

[ Upstream commit 92d3360108f1839ca40451bad20ff67dd24a1964 ]

Add a quirk mechanism to allow specifying that active-high jack-detection
should be used on platforms where this info is not available in devicetree.

And add an entry for the Cyberbook T116 tablet to the DMI table, so that
jack-detection will work properly on this tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211002211459.110124-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: imx: imx6ul: Move csi_sel mux to correct base register

[ Upstream commit 2f9d61869640f732599ec36b984c2b5c46067519 ]

The csi_sel mux register is located in the CCM register base and not the
CCM_ANALOG register base. So move it to the correct position in code.

Otherwise changing the parent of the csi clock can lead to a complete
system failure due to the CCM_ANALOG_PLL_SYS_TOG register being falsely
modified.

Also remove the SET_RATE_PARENT flag since one possible supply for the
csi_sel mux is the system PLL which we don't want to modify.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20210927072857.3940880-1-s.riedmueller@phytec.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: SOF: Intel: hda-dai: fix potential locking issue

[ Upstream commit a20f3b10de61add5e14b6ce4df982f4df2a4cbbc ]

The initial hdac_stream code was adapted a third time with the same
locking issues. Move the spin_lock outside the loops and make sure the
fields are protected on read/write.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210924192417.169243-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: freescale: fix arm,sp805 compatible string

[ Upstream commit 99a7cacc66cae92db40139b57689be2af75fc6b8 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: ipq6018: Fix qcom,controlled-remotely property

[ Upstream commit 3509de752ea14c7e5781b3a56a4a0bf832f5723a ]

Property qcom,controlled-remotely should be boolean.  Fix it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210829111628.5543-2-shawn.guo@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: qcom: msm8998: Fix CPU/L2 idle state latency and residency

[ Upstream commit 3f1dcaff642e75c1d2ad03f783fa8a3b1f56dd50 ]

The entry/exit latency and minimum residency in state for the idle
states of MSM8998 were ..bad: first of all, for all of them the
timings were written for CPU sleep but the min-residency-us param
was miscalculated (supposedly, while porting this from downstream);
Then, the power collapse states are setting PC on both the CPU
cluster *and* the L2 cache, which have different timings: in the
specific case of L2 the times are higher so these ones should be
taken into account instead of the CPU ones.

This parameter misconfiguration was not giving particular issues
because on MSM8998 there was no CPU scaling at all, so cluster/L2
power collapse was rarely (if ever) hit.
When CPU scaling is enabled, though, the wrong timings will produce
SoC unstability shown to the user as random, apparently error-less,
sudden reboots and/or lockups.

This set of parameters are stabilizing the SoC when CPU scaling is
ON and when power collapse is frequently hit.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210901183123.1087392-3-angelogioacchino.delregno@somainline.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: BCM53016: Specify switch ports for Meraki MR32

[ Upstream commit 6abc4ca5a28070945e0d68cb4160b309bfbf4b8b ]

the switch identifies itself as a BCM53012 (rev 5)...
This patch has been tested & verified on OpenWrt's
snapshot with Linux 5.10 (didn't test any older kernels).
The MR32 is able to "talk to the network" as before with
OpenWrt's SWITCHDEV b53 driver.

| b53-srab-switch 18007000.ethernet-switch: found switch: BCM53012, rev 5
| libphy: dsa slave smi: probed
| b53-srab-switch 18007000.ethernet-switch poe (uninitialized):
| PHY [dsa-0.0:00] driver [Generic PHY] (irq=POLL)
| b53-srab-switch 18007000.ethernet-switch: Using legacy PHYLIB callbacks.
| Please migrate to PHYLINK!
| DSA: tree 0 setup

Reported-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8723bs: remove possible deadlock when disconnect (v2)

[ Upstream commit 54659ca026e586bbb33a7e60daa6443a3ac6b5df ]

when turning off a connection, lockdep complains with the
following warning (a modprobe has been done but the same
happens with a disconnection from NetworkManager,
it's enough to trigger a cfg80211_disconnect call):

[  682.855867] ======================================================
[  682.855877] WARNING: possible circular locking dependency detected
[  682.855887] 5.14.0-rc6+ #16 Tainted: G         C OE
[  682.855898] ------------------------------------------------------
[  682.855906] modprobe/1770 is trying to acquire lock:
[  682.855916] ffffb6d000332b00 (&pxmitpriv->lock){+.-.}-{2:2},
at: rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.856073]
               but task is already holding lock:
[  682.856081] ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.856207]
               which lock already depends on the new lock.

[  682.856215]
               the existing dependency chain (in reverse order) is:
[  682.856223]
               -> #1 (&pstapriv->sta_hash_lock){+.-.}-{2:2}:
[  682.856247]        _raw_spin_lock_bh+0x34/0x40
[  682.856265]        rtw_get_stainfo+0x9a/0x110 [r8723bs]
[  682.856389]        rtw_xmit_classifier+0x27/0x130 [r8723bs]
[  682.856515]        rtw_xmitframe_enqueue+0xa/0x20 [r8723bs]
[  682.856642]        rtl8723bs_hal_xmit+0x3b/0xb0 [r8723bs]
[  682.856752]        rtw_xmit+0x4ef/0x890 [r8723bs]
[  682.856879]        _rtw_xmit_entry+0xba/0x350 [r8723bs]
[  682.856981]        dev_hard_start_xmit+0xee/0x320
[  682.856999]        sch_direct_xmit+0x8c/0x330
[  682.857014]        __dev_queue_xmit+0xba5/0xf00
[  682.857030]        packet_sendmsg+0x981/0x1b80
[  682.857047]        sock_sendmsg+0x5b/0x60
[  682.857060]        __sys_sendto+0xf1/0x160
[  682.857073]        __x64_sys_sendto+0x24/0x30
[  682.857087]        do_syscall_64+0x3a/0x80
[  682.857102]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.857117]
               -> #0 (&pxmitpriv->lock){+.-.}-{2:2}:
[  682.857142]        __lock_acquire+0xfd9/0x1b50
[  682.857158]        lock_acquire+0xb4/0x2c0
[  682.857172]        _raw_spin_lock_bh+0x34/0x40
[  682.857185]        rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.857308]        rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.857415]        cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.857522]        cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.857759]        cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.857961]        cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.858163]        raw_notifier_call_chain+0x41/0x50
[  682.858180]        __dev_close_many+0x62/0x100
[  682.858195]        dev_close_many+0x7d/0x120
[  682.858209]        unregister_netdevice_many+0x416/0x680
[  682.858225]        unregister_netdevice_queue+0xab/0xf0
[  682.858240]        unregister_netdev+0x18/0x20
[  682.858255]        rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.858360]        rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.858463]        sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.858532]        device_release_driver_internal+0xf7/0x1d0
[  682.858550]        driver_detach+0x47/0x90
[  682.858564]        bus_remove_driver+0x77/0xd0
[  682.858579]        rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.858685]        __x64_sys_delete_module+0x13f/0x250
[  682.858699]        do_syscall_64+0x3a/0x80
[  682.858715]        entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.858729]
               other info that might help us debug this:

[  682.858737]  Possible unsafe locking scenario:

[  682.858744]        CPU0                    CPU1
[  682.858751]        ----                    ----
[  682.858758]   lock(&pstapriv->sta_hash_lock);
[  682.858772]                                lock(&pxmitpriv->lock);
[  682.858786]                                lock(&pstapriv->sta_hash_lock);
[  682.858799]   lock(&pxmitpriv->lock);
[  682.858812]
                *** DEADLOCK ***

[  682.858820] 5 locks held by modprobe/1770:
[  682.858831]  #0: ffff8d870697d980 (&dev->mutex){....}-{3:3},
at: device_release_driver_internal+0x1a/0x1d0
[  682.858869]  #1: ffffffffbdbbf1c8 (rtnl_mutex){+.+.}-{3:3},
at: unregister_netdev+0xe/0x20
[  682.858906]  #2: ffff8d87054ee5e8 (&rdev->wiphy.mtx){+.+.}-{3:3},
at: cfg80211_netdev_notifier_call+0x9e/0x560 [cfg80211]
[  682.859131]  #3: ffff8d870f2bc8f0 (&wdev->mtx){+.+.}-{3:3},
at: cfg80211_leave+0x20/0x40 [cfg80211]
[  682.859354]  #4: ffffb6d0003336a8 (&pstapriv->sta_hash_lock){+.-.}-{2:2},
at: rtw_free_assoc_resources+0x48/0x110 [r8723bs]
[  682.859482]
               stack backtrace:
[  682.859491] CPU: 1 PID: 1770 Comm: modprobe Tainted: G
C OE     5.14.0-rc6+ #16
[  682.859507] Hardware name: LENOVO 80NR/Madrid, BIOS DACN25WW 08/20/2015
[  682.859517] Call Trace:
[  682.859531]  dump_stack_lvl+0x56/0x6f
[  682.859551]  check_noncircular+0xdb/0xf0
[  682.859579]  __lock_acquire+0xfd9/0x1b50
[  682.859606]  lock_acquire+0xb4/0x2c0
[  682.859623]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.859752]  ? mark_held_locks+0x48/0x70
[  682.859769]  ? rtw_free_stainfo+0x4a/0x4a0 [r8723bs]
[  682.859898]  _raw_spin_lock_bh+0x34/0x40
[  682.859914]  ? rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860039]  rtw_free_stainfo+0x52/0x4a0 [r8723bs]
[  682.860171]  rtw_free_assoc_resources+0x53/0x110 [r8723bs]
[  682.860286]  cfg80211_rtw_disconnect+0x4b/0x70 [r8723bs]
[  682.860397]  cfg80211_disconnect+0x12e/0x2f0 [cfg80211]
[  682.860629]  cfg80211_leave+0x2b/0x40 [cfg80211]
[  682.860836]  cfg80211_netdev_notifier_call+0xa9/0x560 [cfg80211]
[  682.861048]  ? __lock_acquire+0x4dc/0x1b50
[  682.861070]  ? lock_is_held_type+0xa8/0x110
[  682.861089]  ? lock_is_held_type+0xa8/0x110
[  682.861104]  ? find_held_lock+0x2d/0x90
[  682.861120]  ? packet_notifier+0x173/0x300
[  682.861141]  ? lock_release+0xb3/0x250
[  682.861160]  ? packet_notifier+0x192/0x300
[  682.861184]  raw_notifier_call_chain+0x41/0x50
[  682.861205]  __dev_close_many+0x62/0x100
[  682.861224]  dev_close_many+0x7d/0x120
[  682.861245]  unregister_netdevice_many+0x416/0x680
[  682.861264]  ? find_held_lock+0x2d/0x90
[  682.861284]  unregister_netdevice_queue+0xab/0xf0
[  682.861306]  unregister_netdev+0x18/0x20
[  682.861325]  rtw_unregister_netdevs+0x28/0x40 [r8723bs]
[  682.861434]  rtw_dev_remove+0x24/0xd0 [r8723bs]
[  682.861542]  sdio_bus_remove+0x31/0xd0 [mmc_core]
[  682.861615]  device_release_driver_internal+0xf7/0x1d0
[  682.861637]  driver_detach+0x47/0x90
[  682.861656]  bus_remove_driver+0x77/0xd0
[  682.861674]  rtw_drv_halt+0xc/0x678 [r8723bs]
[  682.861782]  __x64_sys_delete_module+0x13f/0x250
[  682.861801]  ? lockdep_hardirqs_on_prepare+0xf3/0x170
[  682.861817]  ? syscall_enter_from_user_mode+0x20/0x70
[  682.861836]  do_syscall_64+0x3a/0x80
[  682.861855]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[  682.861873] RIP: 0033:0x7f6dbe85400b
[  682.861890] Code: 73 01 c3 48 8b 0d 6d 1e 0c 00 f7 d8 64 89
01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa
b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d
1e 0c 00 f7 d8 64 89 01 48
[  682.861906] RSP: 002b:00007ffe7a82f538 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  682.861923] RAX: ffffffffffffffda RBX: 000055a64693bd20 RCX: 00007f6dbe85400b
[  682.861935] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055a64693bd88
[  682.861946] RBP: 000055a64693bd20 R08: 0000000000000000 R09: 0000000000000000
[  682.861957] R10: 00007f6dbe8c7ac0 R11: 0000000000000206 R12: 000055a64693bd88
[  682.861967] R13: 0000000000000000 R14: 000055a64693bd88 R15: 00007ffe7a831848

This happens because when we enqueue a frame for
transmission we do it under xmit_priv lock, then calling
rtw_get_stainfo (needed for enqueuing) takes sta_hash_lock
and this leads to the following lock dependency:

xmit_priv->lock -> sta_hash_lock

Turning off a connection will bring to call
rtw_free_assoc_resources which will set up
the inverse dependency:

sta_hash_lock -> xmit_priv_lock

This could lead to a deadlock as lockdep complains.

Fix it by removing the xmit_priv->lock around
rtw_xmitframe_enqueue call inside rtl8723bs_hal_xmit
and put it in a smaller critical section inside
rtw_xmit_classifier, the only place where
xmit_priv data are actually accessed.

Replace spin_{lock,unlock}_bh(pxmitpriv->lock)
in other tx paths leading to rtw_xmitframe_enqueue
call with spin_{lock,unlock}_bh(psta->sleep_q.lock)
- it's not clear why accessing a sleep_q was protected
by a spinlock on xmitpriv->lock.

This way is avoided the same faulty lock nesting
order.

Extra changes in v2 by Hans de Goede:
-Lift the taking of the struct __queue.lock spinlock out of
 rtw_free_xmitframe_queue() into the callers this allows also
 protecting a bunch of related state in rtw_free_stainfo():
-Protect psta->sleepq_len on rtw_free_xmitframe_queue(&psta->sleep_q);
-Protect struct tx_servq.tx_pending and tx_servq.qcnt when
 calling rtw_free_xmitframe_queue(&tx_servq.sta_pending)
-This also allows moving the spin_lock_bh(&pxmitpriv->lock); to below
 the sleep_q free-ing code, avoiding another ABBA locking issue

CC: Larry Finger <Larry.Finger@lwfinger.net>
Co-developed-by: Hans de Goede <hdegoede@redhat.com>
Tested-on: Lenovo Ideapad MiiX 300-10IBY
Signed-off-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210920145502.155454-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: ux500: Skomer regulator fixes

[ Upstream commit 7aee0288beab72cdfa35af51f62e94373fca595d ]

AUX2 has slightly wrong voltage and AUX5 doesn't need to be
always on.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: tipd: Remove WARN_ON in tps6598x_block_read

[ Upstream commit b7a0a63f3fed57d413bb857de164ea9c3984bc4e ]

Calling tps6598x_block_read with a higher than allowed len can be
handled by just returning an error. There's no need to crash systems
with panic-on-warn enabled.

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Sven Peter <sven@svenpeter.dev>
Link: https://lore.kernel.org/r/20210914140235.65955-3-sven@svenpeter.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: musb: tusb6010: check return value after calling platform_get_resource()

[ Upstream commit 14651496a3de6807a17c310f63c894ea0c5d858e ]

It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210915034925.2399823-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Use context lost quirk for otg

[ Upstream commit 9067839ff45a528bcb015cc2f24f656126b91e3f ]

Let's use SYSC_QUIRK_REINIT_ON_CTX_LOST quirk for am335x otg instead of
SYSC_QUIRK_REINIT_ON_RESUME quirk as we can now handle the context loss
in a more generic way.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bus: ti-sysc: Add quirk handling for reinit on context lost

[ Upstream commit 9d881361206ebcf6285c2ec2ef275aff80875347 ]

Some interconnect target modules such as otg and gpmc on am335x need a
re-init after resume. As we also have PM runtime cases where the context
may be lost, let's handle these all with cpu_pm.

For the am335x resume path, we already have cpu_pm_resume() call
cpu_pm_cluster_exit().

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/bnxt_re: Check if the vlan is valid before reporting

[ Upstream commit 6bda39149d4b8920fdb8744090653aca3daa792d ]

When VF is configured with default vlan, HW strips the vlan from the
packet and driver receives it in Rx completion. VLAN needs to be reported
for UD work completion only if the vlan is configured on the host. Add a
check for valid vlan in the UD receive path.

Link: https://lore.kernel.org/r/1631709163-2287-12-git-send-email-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: hisilicon: fix arm,sp805 compatible string

[ Upstream commit 894d4f1f77d0e88f1f81af2e1e37333c1c41b631 ]

According to Documentation/devicetree/bindings/watchdog/arm,sp805.yaml
the compatible is:
  compatible = "arm,sp805", "arm,primecell";

The current compatible string doesn't exist at all. Fix it.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: rockchip: Disable CDN DP on Pinebook Pro

[ Upstream commit 2513fa5c25d42f55ca5f0f0ab247af7c9fbfa3b1 ]

The CDN DP needs a PHY and a extcon to work correctly. But no extcon is
provided by the device-tree, which leads to an error:
cdn-dp fec00000.dp: [drm:cdn_dp_probe [rockchipdrm]] *ERROR* missing extcon or phy
cdn-dp: probe of fec00000.dp failed with error -22

Disable the CDN DP to make graphic work on the Pinebook Pro.

Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Link: https://lore.kernel.org/r/20210715164101.11486-1-matthias.bgg@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: lpfc: Fix list_add() corruption in lpfc_drain_txq()

[ Upstream commit 99154581b05c8fb22607afb7c3d66c1bace6aa5d ]

When parsing the txq list in lpfc_drain_txq(), the driver attempts to pass
the requests to the adapter. If such an attempt fails, a local "fail_msg"
string is set and a log message output.  The job is then added to a
completions list for cancellation.

Processing of any further jobs from the txq list continues, but since
"fail_msg" remains set, jobs are added to the completions list regardless
of whether a wqe was passed to the adapter.  If successfully added to
txcmplq, jobs are added to both lists resulting in list corruption.

Fix by clearing the fail_msg string after adding a job to the completions
list. This stops the subsequent jobs from being added to the completions
list unless they had an appropriate failure.

Link: https://lore.kernel.org/r/20210910233159.115896-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: NSP: Fix mpcore, mmc node names

[ Upstream commit 15a563d008ef9d04df525f0c476cd7d7127bb883 ]

Running dtbs_check yielded the issues with bcm-nsp.dtsi.

Firstly this patch fixes the following message by appending "-bus" to
the mpcore node name:
mpcore@19000000: $nodename:0: 'mpcore@19000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Secondly mmc node name. The label name can remain as is.
sdhci@21000: $nodename:0: 'sdhci@21000' does not match '^mmc(@.*)?$'

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: wfx: ensure IRQ is ready before enabling it

[ Upstream commit 5e57c668dc097c6c27c973504706edec53f79281 ]

Since commit 5561770f80b1 ("staging: wfx: repair external IRQ for
SDIO"), wfx_sdio_irq_subscribe() enforce the device to use IRQs.
However, there is currently a race in this code. An IRQ may happen
before the IRQ has been registered.

The problem has observed during debug session when the device crashes
before the IRQ set up:

    [ 1.546] wfx-sdio mmc0:0001:1: started firmware 3.12.2 "WF200_ASIC_WFM_(Jenkins)_FW3.12.2" (API: 3.7, keyset: C0, caps: 0x00000002)
    [ 2.559] wfx-sdio mmc0:0001:1: time out while polling control register
    [ 3.565] wfx-sdio mmc0:0001:1: chip is abnormally long to answer
    [ 6.563] wfx-sdio mmc0:0001:1: chip did not answer
    [ 6.568] wfx-sdio mmc0:0001:1: hardware request CONFIGURATION (0x09) on vif 2 returned error -110
    [ 6.577] wfx-sdio mmc0:0001:1: PDS bytes 0 to 12: chip didn't reply (corrupted file?)
    [ 6.585] Unable to handle kernel NULL pointer dereference at virtual address 00000000
    [ 6.592] pgd = c0004000
    [ 6.595] [00000000] *pgd=00000000
    [ 6.598] Internal error: Oops - BUG: 17 [#1] THUMB2
    [ 6.603] Modules linked in:
    [ 6.606] CPU: 0 PID: 23 Comm: kworker/u2:1 Not tainted 3.18.19 #78
    [ 6.612] Workqueue: kmmcd mmc_rescan
    [ 6.616] task: c176d100 ti: c0e50000 task.ti: c0e50000
    [ 6.621] PC is at wake_up_process+0xa/0x14
    [ 6.625] LR is at sdio_irq+0x61/0x250
    [ 6.629] pc : [<c001e8ae>] lr : [<c00ec5bd>] psr: 600001b3
    [ 6.629] sp : c0e51bd8 ip : c0e51cc8 fp : 00000001
    [ 6.640] r10: 00000003 r9 : 00000000 r8 : c0003c34
    [ 6.644] r7 : c0e51bd8 r6 : c0003c30 r5 : 00000001 r4 : c0e78c00
    [ 6.651] r3 : 00000000 r2 : 00000000 r1 : 00000003 r0 : 00000000
    [ 6.657] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA Thumb Segment kernel
    [ 6.664] Control: 50c53c7d Table: 11fd8059 DAC: 00000015
    [ 6.670] Process kworker/u2:1 (pid: 23, stack limit = 0xc0e501b0)
    [ 6.676] Stack: (0xc0e51bd8 to 0xc0e52000)
    [...]
    [ 6.949] [<c001e8ae>] (wake_up_process) from [<c00ec5bd>] (sdio_irq+0x61/0x250)
    [ 6.956] [<c00ec5bd>] (sdio_irq) from [<c0025099>] (handle_irq_event_percpu+0x17/0x92)
    [ 6.964] [<c0025099>] (handle_irq_event_percpu) from [<c002512f>] (handle_irq_event+0x1b/0x24)
    [ 6.973] [<c002512f>] (handle_irq_event) from [<c0026577>] (handle_level_irq+0x5d/0x76)
    [ 6.981] [<c0026577>] (handle_level_irq) from [<c0024cc3>] (generic_handle_irq+0x13/0x1c)
    [ 6.989] [<c0024cc3>] (generic_handle_irq) from [<c0024dd9>] (__handle_domain_irq+0x31/0x48)
    [ 6.997] [<c0024dd9>] (__handle_domain_irq) from [<c0008359>] (ov_handle_irq+0x31/0xe0)
    [ 7.005] [<c0008359>] (ov_handle_irq) from [<c000af5b>] (__irq_svc+0x3b/0x5c)
    [ 7.013] Exception stack(0xc0e51c68 to 0xc0e51cb0)
    [...]
    [ 7.038] [<c000af5b>] (__irq_svc) from [<c01775aa>] (wait_for_common+0x9e/0xc4)
    [ 7.045] [<c01775aa>] (wait_for_common) from [<c00e1dc3>] (mmc_wait_for_req+0x4b/0xdc)
    [ 7.053] [<c00e1dc3>] (mmc_wait_for_req) from [<c00e1e83>] (mmc_wait_for_cmd+0x2f/0x34)
    [ 7.061] [<c00e1e83>] (mmc_wait_for_cmd) from [<c00e7b2b>] (mmc_io_rw_direct_host+0x71/0xac)
    [ 7.070] [<c00e7b2b>] (mmc_io_rw_direct_host) from [<c00e8f79>] (sdio_claim_irq+0x6b/0x116)
    [ 7.078] [<c00e8f79>] (sdio_claim_irq) from [<c00d8415>] (wfx_sdio_irq_subscribe+0x19/0x94)
    [ 7.086] [<c00d8415>] (wfx_sdio_irq_subscribe) from [<c00d5229>] (wfx_probe+0x189/0x2ac)
    [ 7.095] [<c00d5229>] (wfx_probe) from [<c00d83bf>] (wfx_sdio_probe+0x8f/0xcc)
    [ 7.102] [<c00d83bf>] (wfx_sdio_probe) from [<c00e7fbb>] (sdio_bus_probe+0x5f/0xa8)
    [ 7.109] [<c00e7fbb>] (sdio_bus_probe) from [<c00be229>] (driver_probe_device+0x59/0x134)
    [ 7.118] [<c00be229>] (driver_probe_device) from [<c00bd4d7>] (bus_for_each_drv+0x3f/0x4a)
    [ 7.126] [<c00bd4d7>] (bus_for_each_drv) from [<c00be1a5>] (device_attach+0x3b/0x52)
    [ 7.134] [<c00be1a5>] (device_attach) from [<c00bdc2b>] (bus_probe_device+0x17/0x4c)
    [ 7.141] [<c00bdc2b>] (bus_probe_device) from [<c00bcd69>] (device_add+0x2c5/0x334)
    [ 7.149] [<c00bcd69>] (device_add) from [<c00e80bf>] (sdio_add_func+0x23/0x44)
    [ 7.156] [<c00e80bf>] (sdio_add_func) from [<c00e79eb>] (mmc_attach_sdio+0x187/0x1ec)
    [ 7.164] [<c00e79eb>] (mmc_attach_sdio) from [<c00e31bd>] (mmc_rescan+0x18d/0x1fc)
    [ 7.172] [<c00e31bd>] (mmc_rescan) from [<c001a14f>] (process_one_work+0xd7/0x170)
    [ 7.179] [<c001a14f>] (process_one_work) from [<c001a59b>] (worker_thread+0x103/0x1bc)
    [ 7.187] [<c001a59b>] (worker_thread) from [<c001c731>] (kthread+0x7d/0x90)
    [ 7.194] [<c001c731>] (kthread) from [<c0008ce1>] (ret_from_fork+0x11/0x30)
    [ 7.201] Code: 2103 b580 2200 af00 (681b) 46bd
    [ 7.206] ---[ end trace 3ab50aced42eedb4 ]---

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
Link: https://lore.kernel.org/r/20210913130203.1903622-33-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: a100: Fix thermal zone node name

[ Upstream commit 5c34c4e46e601554bfa370b23c8ae3c3c734e9f7 ]

The thermal zones one the A100 are called $device-thermal-zone.

However, the thermal zone binding explicitly requires that zones are
called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-50-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: dts: allwinner: h5: Fix GPU thermal zone node name

[ Upstream commit 94a0f2b0e4e0953d8adf319c44244ef7a57de32c ]

The GPU thermal zone is named gpu_thermal. However, the underscore is
an invalid character for a node name and the thermal zone binding
explicitly requires that zones are called *-thermal. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-48-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: sunxi: Fix OPPs node name

[ Upstream commit ffbe853a3f5a37fa0a511265b21abf097ffdbe45 ]

The operating-points-v2 nodes are named inconsistently, but mostly
either opp_table0 or gpu-opp-table.  However, the underscore is an
invalid character for a node name and the thermal zone binding
explicitly requires that zones are called opp-table-*. Let's fix it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20210901091852.479202-43-maxime@cerno.tech
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Fix serial compatible string

[ Upstream commit 812fa2f0e9d33564bd0131a69750e0d165f4c82a ]

Based on commit 65a2c14d4f00 ("dt-bindings: serial: convert Cadence UART
bindings to YAML") compatible string should look like differently that's
why fix it to be aligned with dt binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/89b36e0a6187cc6b05b27a035efdf79173bd4486.1628240307.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: zynqmp: Do not duplicate flash partition label property

[ Upstream commit 167721a5909f867f8c18c8e78ea58e705ad9bbd4 ]

In kernel 5.4, support has been added for reading MTD devices via the nvmem
API.
For this the mtd devices are registered as read-only NVMEM providers under
sysfs with the same name as the flash partition label property.

So if flash partition label property of multiple flash devices are
identical then the second mtd device fails to get registered as a NVMEM
provider.

This patch fixes the issue by having different label property for different
flashes.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/6c4b9b9232b93d9e316a63c086540fd5bf6b8687.1623684253.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 5.10.81

Link: https://lore.kernel.org/r/20211119171443.892729043@linuxfoundation.org
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Fox Chen <foxhlchen@gmail.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/x86/iopl: Adjust to the faked iopl CLI/STI usage

commit a72fdfd21e01c626273ddcf5ab740d4caef4be54 upstream.

Commit in Fixes changed the iopl emulation to not #GP on CLI and STI
because it would break some insane luserspace tools which would toggle
interrupts.

The corresponding selftest would rely on the fact that executing CLI/STI
would trigger a #GP and thus detect it this way but since that #GP is
not happening anymore, the detection is now wrong too.

Extend the test to actually look at the IF flag and whether executing
those insns had any effect on it. The STI detection needs to have the
fact that interrupts were previously disabled, passed in so do that from
the previous CLI test, i.e., STI test needs to follow a previous CLI one
for it to make sense.

Fixes: b968e84b509d ("x86/iopl: Fake iopl(3) CLI/STI usage")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211030083939.13073-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

thermal: Fix NULL pointer dereferences in of_thermal_ functions

commit 96cfe05051fd8543cdedd6807ec59a0e6c409195 upstream.

of_parse_thermal_zones() parses the thermal-zones node and registers a
thermal_zone device for each subnode. However, if a thermal zone is
consuming a thermal sensor and that thermal sensor device hasn't probed
yet, an attempt to set trip_point_*_temp for that thermal zone device
can cause a NULL pointer dereference. Fix it.

 console:/sys/class/thermal/thermal_zone87 # echo 120000 > trip_point_0_temp
 ...
 Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020
 ...
 Call trace:
  of_thermal_set_trip_temp+0x40/0xc4
  trip_point_temp_store+0xc0/0x1dc
  dev_attr_store+0x38/0x88
  sysfs_kf_write+0x64/0xc0
  kernfs_fop_write_iter+0x108/0x1d0
  vfs_write+0x2f4/0x368
  ksys_write+0x7c/0xec
  __arm64_sys_write+0x20/0x30
  el0_svc_common.llvm.7279915941325364641+0xbc/0x1bc
  do_el0_svc+0x28/0xa0
  el0_svc+0x14/0x24
  el0_sync_handler+0x88/0xec
  el0_sync+0x1c0/0x200

While at it, fix the possible NULL pointer dereference in other
functions as well: of_thermal_get_temp(), of_thermal_set_emul_temp(),
of_thermal_get_trend().

Suggested-by: David Collins <quic_collinsd@quicinc.com>
Signed-off-by: Subbaraman Narayanamurthy <quic_subbaram@quicinc.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/core: Avoid put_page() when GUP fails

commit 4716023a8f6a0f4a28047f14dd7ebdc319606b84 upstream.

PEBS PERF_SAMPLE_PHYS_ADDR events use perf_virt_to_phys() to convert PMU
sampled virtual addresses to physical using get_user_page_fast_only()
and page_to_phys().

Some get_user_page_fast_only() error cases return false, indicating no
page reference, but still initialize the output page pointer with an
unreferenced page. In these error cases perf_virt_to_phys() calls
put_page(). This causes page reference count underflow, which can lead
to unintentional page sharing.

Fix perf_virt_to_phys() to only put_page() if get_user_page_fast_only()
returns a referenced page.

Fixes: fc7ce9c74c3ad ("perf/core, x86: Add PERF_SAMPLE_PHYS_ADDR")
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20211111021814.757086-1-gthelen@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scripts/lld-version.sh: Rewrite based on upstream ld-version.sh

This patch is for linux-5.10.y only.

When scripts/lld-version.sh was initially written, it did not account
for the LLD_VENDOR cmake flag, which changes the output of ld.lld's
--version flag slightly.

Without LLD_VENDOR:

$ ld.lld --version
LLD 14.0.0 (compatible with GNU linkers)

With LLD_VENDOR:

$ ld.lld --version
Debian LLD 14.0.0 (compatible with GNU linkers)

As a result, CONFIG_LLD_VERSION is messed up and configuration values
that are dependent on it cannot be selected:

scripts/lld-version.sh: 20: printf: LLD: expected numeric value
scripts/lld-version.sh: 20: printf: LLD: expected numeric value
scripts/lld-version.sh: 20: printf: LLD: expected numeric value
init/Kconfig:52:warning: 'LLD_VERSION': number is invalid
.config:11:warning: symbol value '00000' invalid for LLD_VERSION
.config:8800:warning: override: CPU_BIG_ENDIAN changes choice state

This was fixed upstream by commit 1f09af062556 ("kbuild: Fix
ld-version.sh script if LLD was built with LLD_VENDOR") in 5.12 but that
was done to ld-version.sh after it was massively rewritten in
commit 02aff8592204 ("kbuild: check the minimum linker version in
Kconfig").

To avoid bringing in that change plus its prerequisites and fixes, just
modify lld-version.sh to make it similar to the upstream ld-version.sh,
which handles ld.lld with or without LLD_VENDOR and ld.bfd without any
errors.

Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: fix unsafe pagevec reuse of hooked pclusters

commit 86432a6dca9bed79111990851df5756d3eb5f57c upstream.

There are pclusters in runtime marked with Z_EROFS_PCLUSTER_TAIL
before actual I/O submission. Thus, the decompression chain can be
extended if the following pcluster chain hooks such tail pcluster.

As the related comment mentioned, if some page is made of a hooked
pcluster and another followed pcluster, it can be reused for in-place
I/O (since I/O should be submitted anyway):
 _______________________________________________________________
|  tail (partial) page |          head (partial) page           |
|_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|

However, it's by no means safe to reuse as pagevec since if such
PRIMARY_HOOKED pclusters finally move into bypass chain without I/O
submission. It's somewhat hard to reproduce with LZ4 and I just found
it (general protection fault) by ro_fsstressing a LZMA image for long
time.

I'm going to actively clean up related code together with multi-page
folio adaption in the next few months. Let's address it directly for
easier backporting for now.

Call trace for reference:
  z_erofs_decompress_pcluster+0x10a/0x8a0 [erofs]
  z_erofs_decompress_queue.isra.36+0x3c/0x60 [erofs]
  z_erofs_runqueue+0x5f3/0x840 [erofs]
  z_erofs_readahead+0x1e8/0x320 [erofs]
  read_pages+0x91/0x270
  page_cache_ra_unbounded+0x18b/0x240
  filemap_get_pages+0x10a/0x5f0
  filemap_read+0xa9/0x330
  new_sync_read+0x11b/0x1a0
  vfs_read+0xf1/0x190

Link: https://lore.kernel.org/r/20211103182006.4040-1-xiang@kernel.org
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()

commit 7dea3de7d384f4c8156e8bd93112ba6db1eb276c upstream.

No any behavior to variable occupied in z_erofs_attach_page() which
is only caller to z_erofs_pagevec_enqueue().

Link: https://lore.kernel.org/r/20210419102623.2015-1-zbestahu@gmail.com
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Gao Xiang <xiang@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI: Add MSI masking quirk for Nvidia ION AHCI

commit f21082fb20dbfb3e42b769b59ef21c2a7f2c7c1f upstream.

The ION AHCI device pretends that MSI masking isn't a thing, while it
actually implements it and needs MSIs to be unmasked to work. Add a quirk
to that effect.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Link: https://lore.kernel.org/r/CALjTZvbzYfBuLB+H=fj2J+9=DxjQ2Uqcy0if_PvmJ-nU-qEgkg@mail.gmail.com
Link: https://lore.kernel.org/r/20211104180130.3825416-3-maz@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

PCI/MSI: Deal with devices lying about their MSI mask capability

commit 2226667a145db2e1f314d7f57fd644fe69863ab9 upstream.

It appears that some devices are lying about their mask capability,
pretending that they don't have it, while they actually do.
The net result is that now that we don't enable MSIs on such
endpoint.

Add a new per-device flag to deal with this. Further patches will
make use of it, sadly.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org
Cc: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>