Merge tag 'objtool-core-2020-10-13' of git://git./linux/kernel/git/tip/tip

Pull objtool updates from Ingo Molnar:
 "Most of the changes are cleanups and reorganization to make the
  objtool code more arch-agnostic. This is in preparation for non-x86
  support.

  Other changes:

   - KASAN fixes

   - Handle unreachable trap after call to noreturn functions better

   - Ignore unreachable fake jumps

   - Misc smaller fixes & cleanups"

* tag 'objtool-core-2020-10-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  perf build: Allow nested externs to enable BUILD_BUG() usage
  objtool: Allow nested externs to enable BUILD_BUG()
  objtool: Permit __kasan_check_{read,write} under UACCESS
  objtool: Ignore unreachable trap after call to noreturn functions
  objtool: Handle calling non-function symbols in other sections
  objtool: Ignore unreachable fake jumps
  objtool: Remove useless tests before save_reg()
  objtool: Decode unwind hint register depending on architecture
  objtool: Make unwind hint definitions available to other architectures
  objtool: Only include valid definitions depending on source file type
  objtool: Rename frame.h -> objtool.h
  objtool: Refactor jump table code to support other architectures
  objtool: Make relocation in alternative handling arch dependent
  objtool: Abstract alternative special case handling
  objtool: Move macros describing structures to arch-dependent code
  objtool: Make sync-check consider the target architecture
  objtool: Group headers to check in a single list
  objtool: Define 'struct orc_entry' only when needed
  objtool: Skip ORC entry creation for non-text sections
  objtool: Move ORC logic out of check()
  ...

Merge branch 'akpm' (patches from Andrew)

Merge misc updates from Andrew Morton:
 "181 patches.

  Subsystems affected by this patch series: kbuild, scripts, ntfs,
  ocfs2, vfs, mm (slab, slub, kmemleak, dax, debug, pagecache, fadvise,
  gup, swap, memremap, memcg, selftests, pagemap, mincore, hmm, dma,
  memory-failure, vmallo and migration)"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (181 commits)
  mm/migrate: remove obsolete comment about device public
  mm/migrate: remove cpages-- in migrate_vma_finalize()
  mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary
  memblock: use separate iterators for memory and reserved regions
  memblock: implement for_each_reserved_mem_region() using __next_mem_region()
  memblock: remove unused memblock_mem_size()
  x86/setup: simplify reserve_crashkernel()
  x86/setup: simplify initrd relocation and reservation
  arch, drivers: replace for_each_membock() with for_each_mem_range()
  arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()
  memblock: reduce number of parameters in for_each_mem_range()
  memblock: make memblock_debug and related functionality private
  memblock: make for_each_memblock_type() iterator private
  mircoblaze: drop unneeded NUMA and sparsemem initializations
  riscv: drop unneeded node initialization
  h8300, nds32, openrisc: simplify detection of memory extents
  arm64: numa: simplify dummy_numa_init()
  arm, xtensa: simplify initialization of high memory pages
  dma-contiguous: simplify cma_early_percent_memory()
  KVM: PPC: Book3S HV: simplify kvm_cma_reserve()
  ...

mm/migrate: remove obsolete comment about device public

Device public memory never had an in tree consumer and was removed in
commit 25b2995a35b6 ("mm: remove MEMORY_DEVICE_PUBLIC support").  Delete
the obsolete comment.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-2-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/migrate: remove cpages-- in migrate_vma_finalize()

The variable struct migrate_vma->cpages is only used in
migrate_vma_setup().  There is no need to decrement it in
migrate_vma_finalize() since it is never checked.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/20200827190735.12752-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, oom_adj: don't loop through tasks in __set_oom_adj when not necessary

Currently __set_oom_adj loops through all processes in the system to keep
oom_score_adj and oom_score_adj_min in sync between processes sharing
their mm.  This is done for any task with more that one mm_users, which
includes processes with multiple threads (sharing mm and signals).
However for such processes the loop is unnecessary because their signal
structure is shared as well.

Android updates oom_score_adj whenever a tasks changes its role
(background/foreground/...) or binds to/unbinds from a service, making it
more/less important.  Such operation can happen frequently.  We noticed
that updates to oom_score_adj became more expensive and after further
investigation found out that the patch mentioned in "Fixes" introduced a
regression.  Using Pixel 4 with a typical Android workload, write time to
oom_score_adj increased from ~3.57us to ~362us.  Moreover this regression
linearly depends on the number of multi-threaded processes running on the
system.

Mark the mm with a new MMF_MULTIPROCESS flag bit when task is created with
(CLONE_VM && !CLONE_THREAD && !CLONE_VFORK).  Change __set_oom_adj to use
MMF_MULTIPROCESS instead of mm_users to decide whether oom_score_adj
update should be synchronized between multiple processes.  To prevent
races between clone() and __set_oom_adj(), when oom_score_adj of the
process being cloned might be modified from userspace, we use
oom_adj_mutex.  Its scope is changed to global.

The combination of (CLONE_VM && !CLONE_THREAD) is rarely used except for
the case of vfork().  To prevent performance regressions of vfork(), we
skip taking oom_adj_mutex and setting MMF_MULTIPROCESS when CLONE_VFORK is
specified.  Clearing the MMF_MULTIPROCESS flag (when the last process
sharing the mm exits) is left out of this patch to keep it simple and
because it is believed that this threading model is rare.  Should there
ever be a need for optimizing that case as well, it can be done by hooking
into the exit path, likely following the mm_update_next_owner pattern.

With the combination of (CLONE_VM && !CLONE_THREAD && !CLONE_VFORK) being
quite rare, the regression is gone after the change is applied.

[surenb@google.com: v3]
Link: https://lkml.kernel.org/r/20200902012558.2335613-1-surenb@google.com
Fixes: 44a70adec910 ("mm, oom_adj: make sure processes sharing mm have same view of oom_score_adj")
Reported-by: Tim Murray <timmurray@google.com>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Eugene Syromiatnikov <esyr@redhat.com>
Cc: Christian Kellner <christian@kellner.me>
Cc: Adrian Reber <areber@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Gladkov <gladkov.alexey@gmail.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Bernd Edlinger <bernd.edlinger@hotmail.de>
Cc: John Johansen <john.johansen@canonical.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200824153036.3201505-1-surenb@google.com
Debugged-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: use separate iterators for memory and reserved regions

for_each_memblock() is used to iterate over memblock.memory in a few
places that use data from memblock_region rather than the memory ranges.

Introduce separate for_each_mem_region() and
for_each_reserved_mem_region() to improve encapsulation of memblock
internals from its users.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org> [x86]
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS]
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-18-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: implement for_each_reserved_mem_region() using __next_mem_region()

Iteration over memblock.reserved with for_each_reserved_mem_region() used
__next_reserved_mem_region() that implemented a subset of
__next_mem_region().

Use __for_each_mem_range() and, essentially, __next_mem_region() with
appropriate parameters to reduce code duplication.

While on it, rename for_each_reserved_mem_region() to
for_each_reserved_mem_range() for consistency.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-17-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: remove unused memblock_mem_size()

The only user of memblock_mem_size() was x86 setup code, it is gone now
and memblock_mem_size() funciton can be removed.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-16-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/setup: simplify reserve_crashkernel()

* Replace magic numbers with defines
* Replace memblock_find_in_range() + memblock_reserve() with
  memblock_phys_alloc_range()
* Stop checking for low memory size in reserve_crashkernel_low(). The
  allocation from limited range will anyway fail if there is no enough
  memory, so there is no need for extra traversal of memblock.memory

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-15-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86/setup: simplify initrd relocation and reservation

Currently, initrd image is reserved very early during setup and then it
might be relocated and re-reserved after the initial physical memory
mapping is created.  The "late" reservation of memblock verifies that
mapped memory size exceeds the size of initrd, then checks whether the
relocation required and, if yes, relocates inirtd to a new memory
allocated from memblock and frees the old location.

The check for memory size is excessive as memblock allocation will anyway
fail if there is not enough memory.  Besides, there is no point to
allocate memory from memblock using memblock_find_in_range() +
memblock_reserve() when there exists memblock_phys_alloc_range() with
required functionality.

Remove the redundant check and simplify memblock allocation.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-14-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch, drivers: replace for_each_membock() with for_each_mem_range()

There are several occurrences of the following pattern:

for_each_memblock(memory, reg) {
start = __pfn_to_phys(memblock_region_memory_base_pfn(reg);
end = __pfn_to_phys(memblock_region_memory_end_pfn(reg));

/* do something with start and end */
}

Using for_each_mem_range() iterator is more appropriate in such cases and
allows simpler and cleaner code.

[akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build]
[rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring]
Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-13-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arch, mm: replace for_each_memblock() with for_each_mem_pfn_range()

There are several occurrences of the following pattern:

for_each_memblock(memory, reg) {
start_pfn = memblock_region_memory_base_pfn(reg);
end_pfn = memblock_region_memory_end_pfn(reg);

/* do something with start_pfn and end_pfn */
}

Rather than iterate over all memblock.memory regions and each time query
for their start and end PFNs, use for_each_mem_pfn_range() iterator to get
simpler and clearer code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com> [.clang-format]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-12-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: reduce number of parameters in for_each_mem_range()

Currently for_each_mem_range() and for_each_mem_range_rev() iterators are
the most generic way to traverse memblock regions.  As such, they have 8
parameters and they are hardly convenient to users.  Most users choose to
utilize one of their wrappers and the only user that actually needs most
of the parameters is memblock itself.

To avoid yet another naming for memblock iterators, rename the existing
for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new
for_each_mem_range[_rev]() wrappers with only index, start and end
parameters.

The new wrapper nicely fits into init_unavailable_mem() and will be used
in upcoming changes to simplify memblock traversals.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> [MIPS]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-11-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: make memblock_debug and related functionality private

The only user of memblock_dbg() outside memblock was s390 setup code and
it is converted to use pr_debug() instead.  This allows to stop exposing
memblock_debug and memblock_dbg() to the rest of the kernel.

[akpm@linux-foundation.org: make memblock_dbg() safer and neater]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memblock: make for_each_memblock_type() iterator private

for_each_memblock_type() is not used outside mm/memblock.c, move it there
from include/linux/memblock.h

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mircoblaze: drop unneeded NUMA and sparsemem initializations

microblaze does not support neither NUMA not SPARSMEM, so there is no
point to call memblock_set_node() and
sparse_memory_present_with_active_regions() functions during microblaze
memory initialization.

Remove these calls and the surrounding code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-8-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

riscv: drop unneeded node initialization

RISC-V does not (yet) support NUMA and for UMA architectures node 0 is
used implicitly during early memory initialization.

There is no need to call memblock_set_node(), remove this call and the
surrounding code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-7-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300, nds32, openrisc: simplify detection of memory extents

Instead of traversing memblock.memory regions to find memory_start and
memory_end, simply query memblock_{start,end}_of_DRAM().

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Stafford Horne <shorne@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-6-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm64: numa: simplify dummy_numa_init()

dummy_numa_init() loops over memblock.memory and passes nid=0 to
numa_add_memblk() which essentially wraps memblock_set_node().  However,
memblock_set_node() can cope with entire memory span itself, so the loop
over memblock.memory regions is redundant.

Using a single call to memblock_set_node() rather than a loop also fixes
an issue with a buggy ACPI firmware in which the SRAT table covers some
but not all of the memory in the EFI memory map.

Jonathan Cameron says:

  This issue can be easily triggered by having an SRAT table which fails
  to cover all elements of the EFI memory map.

  This firmware error is detected and a warning printed. e.g.
  "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]"
  At that point we fall back to dummy_numa_init().

  However, the failed ACPI init has left us with our memblocks all broken
  up as we split them when trying to assign them to NUMA nodes.

  We then iterate over the memblocks and add them to node 0.

  numa_add_memblk() calls memblock_set_node() which merges regions that
  were previously split up during the earlier attempt to add them to
  different nodes during parsing of SRAT.

  This means elements are moved in the memblock array and we can end up
  in a different memblock after the call to numa_add_memblk().
  Result is:

  Unable to handle kernel paging request at virtual address 0000000000003a40
  Mem abort info:
    ESR = 0x96000004
    EC = 0x25: DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000004
    CM = 0, WnR = 0
  [0000000000003a40] user address but active_mm is swapper
  Internal error: Oops: 96000004 [#1] PREEMPT SMP

  ...

  Call trace:
    sparse_init_nid+0x5c/0x2b0
    sparse_init+0x138/0x170
    bootmem_init+0x80/0xe0
    setup_arch+0x2a0/0x5fc
    start_kernel+0x8c/0x648

Replace the loop with a single call to memblock_set_node() to the entire
memory.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-5-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm, xtensa: simplify initialization of high memory pages

free_highpages() in both arm and xtensa essentially open-code
for_each_free_mem_range() loop to detect high memory pages that were not
reserved and that should be initialized and passed to the buddy allocator.

Replace open-coded implementation of for_each_free_mem_range() with usage
of memblock API to simplify the code.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa]
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

dma-contiguous: simplify cma_early_percent_memory()

The memory size calculation in cma_early_percent_memory() traverses
memblock.memory rather than simply call memblock_phys_mem_size().  The
comment in that function suggests that at some point there should have
been call to memblock_analyze() before memblock_phys_mem_size() could be
used.  As of now, there is no memblock_analyze() at all and
memblock_phys_mem_size() can be used as soon as cold-plug memory is
registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: https://lkml.kernel.org/r/20200818151634.14343-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KVM: PPC: Book3S HV: simplify kvm_cma_reserve()

Patch series "memblock: seasonal cleaning^w cleanup", v3.

These patches simplify several uses of memblock iterators and hide some of
the memblock implementation details from the rest of the system.

This patch (of 17):

The memory size calculation in kvm_cma_reserve() traverses memblock.memory
rather than simply call memblock_phys_mem_size().  The comment in that
function suggests that at some point there should have been call to
memblock_analyze() before memblock_phys_mem_size() could be used.  As of
now, there is no memblock_analyze() at all and memblock_phys_mem_size()
can be used as soon as cold-plug memory is registered with memblock.

Replace loop over memblock.memory with a call to memblock_phys_mem_size().

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Daniel Axtens <dja@axtens.net>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Emil Renner Berthing <kernel@esmil.dk>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Hari Bathini <hbathini@linux.ibm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Link: https://lkml.kernel.org/r/20200818151634.14343-1-rppt@kernel.org
Link: https://lkml.kernel.org/r/20200818151634.14343-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempool: add 'else' to split mutually exclusive case

Add else to split mutually exclusive case and avoid some unnecessary check.
It doesn't seem to change code generation (compiler is smart), but I think
it helps readability.

[akpm@linux-foundation.org: fix comment location]

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200924111641.28922-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove unused alloc_page_vma_node()

No one use this macro anymore.

Also fix code style of policy_node().

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921021401.84508-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mempolicy: remove or narrow the lock on current

It is not necessary to hold the lock of current when setting nodemask of
a new policy.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921040416.86185-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: 8x compaction_test speedup

This patch reduces the running time for compaction_test from about 27 sec,
to 3.3 sec, which is about an 8x speedup.

These numbers are for an Intel x86_64 system with 32 GB of DRAM.

The compaction_test.c program was spending most of its time doing mmap(),
1 MB at a time, on about 25 GB of memory.

Instead, do the mmaps 100 MB at a time.  (Going past 100 MB doesn't make
things go much faster, because other parts of the program are using the
remaining time.)

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Sri Jayaramappa <sjayaram@akamai.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Link: https://lkml.kernel.org/r/20201002080621.551044-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/compaction.h: clean code by removing unused enum value

The enum value 'COMPACT_INACTIVE' is never used so can be removed.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200917110750.12015-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/compaction.c: micro-optimization remove unnecessary branch

The same code can work both for 'zone->compact_considered > defer_limit'
and 'zone->compact_considered >= defer_limit'.  In the latter there is one
branch less which is more effective considering performance.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Link: https://lkml.kernel.org/r/20200913190448.28649-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/zbud: remove redundant initialization

zhdr is already initialized in the front of the function, so remove
redundant initialization here.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Link: https://lkml.kernel.org/r/1600419885-191907-1-git-send-email-chenxiang66@hisilicon.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/z3fold.c: use xx_zalloc instead xx_alloc and memset

alloc_slots() allocates memory for slots using kmem_cache_alloc(), then
memsets it.  We can just use kmem_cache_zalloc().

Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200926100834.GA184671@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: fix comments for isolate_lru_page()

fix comments for isolate_lru_page():
s/fundamentnal/fundamental

Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927173923.GA8058@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmscan: fix infinite loop in drop_slab_node

We have observed that drop_caches can take a considerable amount of
time (<put data here>).  Especially when there are many memcgs involved
because they are adding an additional overhead.

It is quite unfortunate that the operation cannot be interrupted by a
signal currently.  Add a check for fatal signals into the main loop so
that userspace can control early bailout.

There are two reasons:

1. We have too many memcgs, even though one object freed in one memcg,
   the sum of object is bigger than 10.

2. We spend a lot of time in traverse memcg once.  So, the memcg who
   traversed at the first have been freed many objects.  Traverse memcg
   next time, the freed count bigger than 10 again.

We can get the following info through 'ps':

  root:~# ps -aux | grep drop
  root  357956 ... R    Aug25 21119854:55 echo 3 > /proc/sys/vm/drop_caches
  root 1771385 ... R    Aug16 21146421:17 echo 3 > /proc/sys/vm/drop_caches
  root 1986319 ... R    18:56 117:27 echo 3 > /proc/sys/vm/drop_caches
  root 2002148 ... R    Aug24 5720:39 echo 3 > /proc/sys/vm/drop_caches
  root 2564666 ... R    18:59 113:58 echo 3 > /proc/sys/vm/drop_caches
  root 2639347 ... R    Sep03 2383:39 echo 3 > /proc/sys/vm/drop_caches
  root 3904747 ... R    03:35 993:31 echo 3 > /proc/sys/vm/drop_caches
  root 4016780 ... R    Aug21 7882:18 echo 3 > /proc/sys/vm/drop_caches

Use bpftrace follow 'freed' value in drop_slab_node:

  root:~# bpftrace -e 'kprobe:drop_slab_node+70 {@ret=hist(reg("bp")); }'
  Attaching 1 probe...
  ^B^C

  @ret:
  [64, 128)        1 |                                                    |
  [128, 256)      28 |                                                    |
  [256, 512)     107 |@                                                   |
  [512, 1K)      298 |@@@                                                 |
  [1K, 2K)       613 |@@@@@@@                                             |
  [2K, 4K)      4435 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@|
  [4K, 8K)       442 |@@@@@                                               |
  [8K, 16K)      299 |@@@                                                 |
  [16K, 32K)     100 |@                                                   |
  [32K, 64K)     139 |@                                                   |
  [64K, 128K)     56 |                                                    |
  [128K, 256K)    26 |                                                    |
  [256K, 512K)     2 |                                                    |

In the while loop, we can check whether the TASK_KILLABLE signal is set,
if so, we should break the loop.

Signed-off-by: Chunxin Zang <zangchunxin@bytedance.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Chris Down <chris@chrisdown.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Link: https://lkml.kernel.org/r/20200909152047.27905-1-zangchunxin@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: add lockdep check for i_mmap_rwsem held in huge_pmd_share

As a debugging aid, huge_pmd_share should make sure i_mmap_rwsem is held
if necessary.  To clarify the 'if necessary', expand the comment block at
the beginning of huge_pmd_share.

No functional change.  The added i_mmap_assert_locked() call is only
enabled if CONFIG_LOCKDEP.

Ideally, this should have been included with commit 34ae204f1851
("hugetlbfs: remove call to huge_pte_alloc without i_mmap_rwsem").

Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Link: https://lkml.kernel.org/r/20200911201248.88537-1-mike.kravetz@oracle.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: take the free hpage during the iteration directly

Function dequeue_huge_page_node_exact() iterates the free list and return
the first valid free hpage.

Instead of break and check the loop variant, we could return in the loop
directly.  This could reduce some redundant check.

[mike.kravetz@oracle.com: points out a logic error]
[richard.weiyang@linux.alibaba.com: v4]
Link: https://lkml.kernel.org/r/20200901014636.29737-8-richard.weiyang@linux.alibaba.com
Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-8-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: narrow the hugetlb_lock protection area during preparing huge page

set_hugetlb_cgroup_[rsvd] just manipulate page local data, which is not
necessary to be protected by hugetlb_lock.

Let's take this out.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-7-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: a page from buddy is not on any list

The page allocated from buddy is not on any list, so just use list_add()
is enough.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-6-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: count file_region to be added when regions_needed != NULL

There are only two cases of function add_reservation_in_range()

    * count file_region and return the number in regions_needed
    * do the real list operation without counting

This means it is not necessary to have two parameters to classify these
two cases.

Just use regions_needed to separate them.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-5-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: use list_splice to merge two list at once

Instead of add allocated file_region one by one to region_cache, we could
use list_splice to merge two list at once.

Also we know the number of entries in the list, increase the number
directly.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-4-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: remove VM_BUG_ON(!nrg) in get_file_region_entry_from_cache()

We are sure to get a valid file_region, otherwise the
VM_BUG_ON(resv->region_cache_count <= 0) at the very beginning would be
triggered.

Let's remove the redundant one.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200831022351.20916-3-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb: not necessary to coalesce regions recursively

Patch series "mm/hugetlb: code refine and simplification", v4.

Following are some cleanups for hugetlb.  Simple testing with
tools/testing/selftests/vm/map_hugetlb passes.

This patch (of 7):

Per my understanding, we keep the regions ordered and would always
coalesce regions properly.  So the task to keep this property is just to
coalesce its neighbour.

Let's simplify this.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: https://lkml.kernel.org/r/20200901014636.29737-1-richard.weiyang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200831022351.20916-1-richard.weiyang@linux.alibaba.com
Link: https://lkml.kernel.org/r/20200831022351.20916-2-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

doc/vm: fix typo in the hugetlb admin documentation

Change 'pecify' to 'Specify'.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200723032248.24772-4-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: remove the unnecessary non_swap_entry()

If a swap entry tests positive for either is_[migration|hwpoison]_entry(),
then its swap_type() is among SWP_MIGRATION_READ, SWP_MIGRATION_WRITE and
SWP_HWPOISON.  All these types >= MAX_SWAPFILES, exactly what is asserted
with non_swap_entry().

So the checking non_swap_entry() in is_hugetlb_entry_migration() and
is_hugetlb_entry_hwpoisoned() is redundant.

Let's remove it to optimize code.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200723032248.24772-3-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: make is_hugetlb_entry_hwpoisoned return bool

Patch series "mm/hugetlb: Small cleanup and improvement", v2.

This patch (of 3):

Just like its neighbour is_hugetlb_entry_migration() has done.

Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lkml.kernel.org/r/20200723032248.24772-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20200723032248.24772-2-bhe@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/gfp.h: clarify usage of GFP_ATOMIC in !preemptible contexts

There is a general understanding that GFP_ATOMIC/GFP_NOWAIT are to be used
from atomic contexts.  E.g.  from within a spin lock or from the IRQ
context.  This is correct but there are some atomic contexts where the
above doesn't hold.  One of them would be an NMI context.  Page allocator
has never supported that and the general fear of this context didn't let
anybody to actually even try to use the allocator there.  Good, but let's
be more specific about that.

Another such a context, and that is where people seem to be more daring,
is raw_spin_lock.  Mostly because it simply resembles regular spin lock
which is supported by the allocator and there is not any implementation
difference with !RT kernels in the first place.  Be explicit that such a
context is not supported by the allocator.  The underlying reason is that
zone->lock would have to become raw_spin_lock as well and that has turned
out to be a problem for RT
(http://lkml.kernel.org/r/87mu305c1w.fsf@nanos.tec.linutronix.de).

Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Uladzislau Rezki <urezki@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Link: https://lkml.kernel.org/r/20200929123010.5137-1-mhocko@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix freeing non-compound pages

Here is a very rare race which leaks memory:

Page P0 is allocated to the page cache.  Page P1 is free.

Thread A                Thread B                Thread C
find_get_entry():
xas_load() returns P0
Removes P0 from page cache
P0 finds its buddy P1
alloc_pages(GFP_KERNEL, 1) returns P0
P0 has refcount 1
page_cache_get_speculative(P0)
P0 has refcount 2
__free_pages(P0)
P0 has refcount 1
put_page(P0)
P1 is not freed

Fix this by freeing all the pages in __free_pages() that won't be freed
by the call to put_page().  It's usually not a good idea to split a page,
but this is a very unlikely scenario.

Fixes: e286781d5f2e ("mm: speculative page references")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Nick Piggin <npiggin@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200926213919.26642-1-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move call to compound_head() in release_pages()

The function is_huge_zero_page() doesn't call compound_head() to make sure
the page pointer is a head page. The call to is_huge_zero_page() in
release_pages() is made before compound_head() is called so the test would
fail if release_pages() was called with a tail page of the huge_zero_page
and put_page_testzero() would be called releasing the page.
This is unlikely to be happening in normal use or we would be seeing all
sorts of process data corruption when accessing a THP zero page.

Looking at other places where is_huge_zero_page() is called, all seem to
only pass a head page so I think the right solution is to move the call
to compound_head() in release_pages() to a point before calling
is_huge_zero_page().

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20200917173938.16420-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmzone: clean code by removing unused macro parameter

Previously 'for_next_zone_zonelist_nodemask' macro parameter 'zlist' was
unused so this patch removes it.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200917211906.30059-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: __perform_reclaim should return 'unsigned long'

__perform_reclaim()'s single caller expects it to return 'unsigned long',
hence change its return value and a local variable to 'unsigned long'.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200916022138.16740-1-yanfei.xu@windriver.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: clean code by merging two functions

finalise_ac() is just 'epilogue' for 'prepare_alloc_pages'.  Therefore
there is no need to keep them both so 'finalise_ac' content can be merged
into prepare_alloc_pages() code.  It would make __alloc_pages_nodemask()
cleaner when it comes to readability.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport <rppt@kernel.org>
Link: https://lkml.kernel.org/r/20200916110118.6537-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: fix early params garbage value accesses

Previously in '__init early_init_on_alloc' and '__init early_init_on_free'
the return values from 'kstrtobool' were not handled properly.  That
caused potential garbage value read from variable 'bool_result'.
Introduced patch fixes error handling.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200916214125.28271-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: micro-optimization remove unnecessary branch

Previously flags check was separated into two separated checks with two
separated branches. In case of presence of any of two mentioned flags,
the same effect on flow occurs. Therefore checks can be merged and one
branch can be avoided.

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200911092310.31136-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: clean code by removing unnecessary initialization

Previously variable 'tmp' was initialized, but was not read later before
reassigning.  So the initialization can be removed.

[akpm@linux-foundation.org: remove `tmp' altogether]

Signed-off-by: Mateusz Nosek <mateusznosek0@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200904132422.17387-1-mateusznosek0@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm, isolation: avoid checking unmovable pages across pageblock boundary

In has_unmovable_pages(), the page parameter would not always be the first
page within a pageblock (see how the page pointer is passed in from
start_isolate_page_range() after call __first_valid_page()), so that would
cause checking unmovable pages span two pageblocks.

After this patch, the checking is enforced within one pageblock no matter
the page is first one or not, and obey the semantics of this function.

This issue is found by code inspection.

Michal said "this might lead to false negatives when an unrelated block
would cause an isolation failure".

Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Hildenbrand <david@redhat.com>
Link: https://lkml.kernel.org/r/20200824065811.383266-1-lixinhai.lxh@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: document semantics of ZONE_MOVABLE

Let's document what ZONE_MOVABLE means, how it's used, and which special
cases we have regarding unmovable pages (memory offlining vs.  migration /
allocations).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200816125333.7434-7-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

virtio-mem: don't special-case ZONE_MOVABLE

When introducing virtio-mem, the semantics of ZONE_MOVABLE were rather
unclear, which is why we special-cased ZONE_MOVABLE such that partially
plugged blocks would never end up in ZONE_MOVABLE.

Now that the semantics are much clearer (and will be documented in a
follow-up patch including the new virtio-mem behavior), let's allow to
online partially plugged memory blocks to ZONE_MOVABLE and also consider
memory blocks that were onlined to ZONE_MOVABLE when unplugging memory.
While unplugged memory pages are, in general, unmovable, they can be
skipped when offlining memory.

virtio-mem only unplugs fairly big chunks (in the megabyte range) and
rather tries to shrink the memory region than randomly choosing memory.
In theory, if all other pages in the movable zone would be movable,
virtio-mem would only shrink that zone and not create any kind of
fragmentation.

In the future, we might want to remember the zone again and use the
information when (un)plugging memory.  For now, let's keep it simple.

Note: Support for defragmentation is planned, to deal with fragmentation
after unplug due to memory chunks within memory blocks that could not get
unplugged before (e.g., somebody pinning pages within ZONE_MOVABLE for a
longer time).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200816125333.7434-6-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_isolation: cleanup set_migratetype_isolate()

Let's clean it up a bit, simplifying the exit paths.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200816125333.7434-5-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_isolation: drop WARN_ON_ONCE() in set_migratetype_isolate()

Inside has_unmovable_pages(), we have a comment describing how unmovable
data could end up in ZONE_MOVABLE - via "movablecore".  Also, besides
checking if the first page in the pageblock is reserved, we don't perform
any further checks in case of ZONE_MOVABLE.

In case of memory offlining, we set REPORT_FAILURE, properly dump_page()
the page and handle the error gracefully.  alloc_contig_pages() users
currently never allocate from ZONE_MOVABLE.  E.g., hugetlb uses
alloc_contig_pages() for the allocation of gigantic pages only, which will
never end up on the MOVABLE zone (see htlb_alloc_mask()).

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200816125333.7434-4-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_isolation: exit early when pageblock is isolated in set_migratetype_isolate()

Right now, if we have two isolations racing on a pageblock that's in the
MOVABLE zone, we would trigger the WARN_ON_ONCE().  Let's just return
directly, simplifying error handling.

The change was introduced in commit 3d680bdf60a5 ("mm/page_isolation: fix
potential warning from user").  As far as I can see, we currently don't
have alloc_contig_range() users that use the ZONE_MOVABLE (anymore), so
it's currently more a cleanup and a preparation for the future than a fix.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Acked-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Link: http://lkml.kernel.org/r/20200816125333.7434-3-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc: tweak comments in has_unmovable_pages()

Patch series "mm / virtio-mem: support ZONE_MOVABLE", v5.

When introducing virtio-mem, the semantics of ZONE_MOVABLE were rather
unclear, which is why we special-cased ZONE_MOVABLE such that partially
plugged blocks would never end up in ZONE_MOVABLE.

Now that the semantics are much clearer (and are documented in patch #6),
let's support partially plugged memory blocks in ZONE_MOVABLE, allowing
partially plugged memory blocks to be online to ZONE_MOVABLE and also
unplugging from such memory blocks.  This avoids surprises when onlining
of memory blocks suddenly fails, just because they are not completely
populated by virtio-mem (yet).

This is especially helpful for testing, but also paves the way for
virtio-mem optimizations, allowing more memory to get reliably unplugged.

Cleanup has_unmovable_pages() and set_migratetype_isolate(), providing
better documentation of how ZONE_MOVABLE interacts with different kind of
unmovable pages (memory offlining vs.  alloc_contig_range()).

This patch (of 6):

Let's move the split comment regarding bootmem allocations and memory
holes, especially in the context of ZONE_MOVABLE, to the PageReserved()
check.

Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Qian Cai <cai@lca.pw>
Link: http://lkml.kernel.org/r/20200816125333.7434-1-david@redhat.com
Link: http://lkml.kernel.org/r/20200816125333.7434-2-david@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: kasan: do not panic if both panic_on_warn and kasan_multishot set

KASAN errors will currently trigger a panic when panic_on_warn is set.
This renders kasan_multishot useless, as further KASAN errors won't be
reported if the kernel has already paniced.  By making kasan_multishot
disable this behaviour for KASAN errors, we can still have the benefits of
panic_on_warn for non-KASAN warnings, yet be able to use kasan_multishot.

This is particularly important when running KASAN tests, which need to
trigger multiple KASAN errors: previously these would panic the system if
panic_on_warn was set, now they can run (and will panic the system should
non-KASAN warnings show up).

Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Patricia Alfonso <trishalfonso@google.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-6-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-6-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KASAN: Testing Documentation

Include documentation on how to test KASAN using CONFIG_TEST_KASAN_KUNIT
and CONFIG_TEST_KASAN_MODULE.

Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-5-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-5-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KASAN: port KASAN Tests to KUnit

Transfer all previous tests for KASAN to KUnit so they can be run more
easily.  Using kunit_tool, developers can run these tests with their other
KUnit tests and see "pass" or "fail" with the appropriate KASAN report
instead of needing to parse each KASAN report to test KASAN
functionalities.  All KASAN reports are still printed to dmesg.

Stack tests do not work properly when KASAN_STACK is enabled so those
tests use a check for "if IS_ENABLED(CONFIG_KASAN_STACK)" so they only run
if stack instrumentation is enabled.  If KASAN_STACK is not enabled, KUnit
will print a statement to let the user know this test was not run with
KASAN_STACK enabled.

copy_user_test and kasan_rcu_uaf cannot be run in KUnit so there is a
separate test file for those tests, which can be run as before as a
module.

[trishalfonso@google.com: v14]
Link: https://lkml.kernel.org/r/20200915035828.570483-4-davidgow@google.com
Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200910070331.3358048-4-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KUnit: KASAN Integration

Integrate KASAN into KUnit testing framework.

        - Fail tests when KASAN reports an error that is not expected
        - Use KUNIT_EXPECT_KASAN_FAIL to expect a KASAN error in KASAN
  tests
        - Expected KASAN reports pass tests and are still printed when run
          without kunit_tool (kunit_tool still bypasses the report due to the
          test passing)
- KUnit struct in current task used to keep track of the current
  test from KASAN code

Make use of "[PATCH v3 kunit-next 1/2] kunit: generalize kunit_resource
API beyond allocated resources" and "[PATCH v3 kunit-next 2/2] kunit: add
support for named resources" from Alan Maguire [1]

        - A named resource is added to a test when a KASAN report is
          expected
        - This resource contains a struct for kasan_data containing
          booleans representing if a KASAN report is expected and if a
          KASAN report is found

[1] (https://lore.kernel.org/linux-kselftest/1583251361-12748-1-git-send-email-alan.maguire@oracle.com/T/#t)

Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-3-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-3-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kasan/kunit: add KUnit Struct to Current Task

Patch series "KASAN-KUnit Integration", v14.

This patchset contains everything needed to integrate KASAN and KUnit.

KUnit will be able to:
(1) Fail tests when an unexpected KASAN error occurs
(2) Pass tests when an expected KASAN error occurs

Convert KASAN tests to KUnit with the exception of copy_user_test because
KUnit is unable to test those.

Add documentation on how to run the KASAN tests with KUnit and what to
expect when running these tests.

This patch (of 5):

In order to integrate debugging tools like KASAN into the KUnit framework,
add KUnit struct to the current task to keep track of the current KUnit
test.

Signed-off-by: Patricia Alfonso <trishalfonso@google.com>
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Tested-by: Andrey Konovalov <andreyknvl@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Link: https://lkml.kernel.org/r/20200915035828.570483-1-davidgow@google.com
Link: https://lkml.kernel.org/r/20200915035828.570483-2-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-1-davidgow@google.com
Link: https://lkml.kernel.org/r/20200910070331.3358048-2-davidgow@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

docs/vm: fix 'mm_count' vs 'mm_users' counter confusion

In the context of the anonymous address space lifespan description the
'mm_users' reference counter is confused with 'mm_count'.  I.e a "zombie"
mm gets released when "mm_count" becomes zero, not "mm_users".

Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Link: https://lkml.kernel.org/r/1597040695-32633-1-git-send-email-agordeev@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: fix the comment of find_vm_area

Fix the comment of find_vm_area() and get_vm_area()

Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200927153034.GA199877@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/vmalloc.c: update the comment in __vmalloc_area_node()

Since c67dc624757 ("mm/vmalloc: do not call kmemleak_free() on not yet
accounted memory"), the __vunmap() have been changed to __vfree(), so
update the confusing comment().

Signed-off-by: Hui Su <sh_def@163.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Penyaev <rpenyaev@suse.de>
Link: https://lkml.kernel.org/r/20200927155409.GA3315@rlk
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory-failure.c: remove unused macro `writeback'

Unlike others we don't use the marco writeback.  so let's remove it to
tame gcc warning:

mm/memory-failure.c:827: warning: macro "writeback" is not used
[-Wunused-macros]

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Link: https://lkml.kernel.org/r/1599715096-20369-1-git-send-email-alex.shi@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory-failure: do pgoff calculation before for_each_process()

There is no need to calculate pgoff in each loop of for_each_process(), so
move it to the place before for_each_process(), which can save some CPU
cycles.

Signed-off-by: Xianting Tian <tian.xianting@h3c.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Link: http://lkml.kernel.org/r/20200818082647.34322-1-tian.xianting@h3c.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dmapool.c: replace hard coded function name with __func__

No need to hard code function name when __func__ can be used.

While here, replace specifiers for special types like dma_addr_t.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200814135055.24898-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dmapool.c: replace open-coded list_for_each_entry_safe()

There is a place in the code where open-coded version of
list_for_each_entry_safe() is used.  Replace that with the standard macro.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Matthew Wilcox <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200814135055.24898-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib/test_hmm.c: remove unused dmirror_zero_page

The variable dmirror_zero_page is unused in the HMM self test driver which
was probably intended to demonstrate how a driver could use
migrate_vma_setup() to share a single read-only device private zero page
similar to how the CPU does.  However, this isn't needed for the self
tests so remove it.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Jerome Glisse <jglisse@redhat.com>
Link: https://lkml.kernel.org/r/20200914213801.16520-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tools/testing/selftests/vm/hmm-tests.c: use the new SKIP() macro

Some tests might not be able to be run if resources like huge pages are
not available.  Mark these tests as skipped instead of simply passing.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Shuah Khan <shuah@kernel.org>
Link: http://lkml.kernel.org/r/20200827190400.12608-1-rcampbell@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

include/linux/huge_mm.h: remove mincore_huge_pmd declaration

As mincore_huge_pmd() was dropped, remove the declaration from the header
file.

Signed-off-by: Yulei Zhang <yuleixzhang@tencent.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Link: https://lkml.kernel.org/r/20200922083423.15074-1-yuleixzhang@tencent.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: remove src/dst mm parameter in copy_page_range()

Both of the mm pointers are not needed after commit 7a4830c380f3
("mm/fork: Pass new vma pointer into copy_page_range()").

Jason Gunthorpe also reported that the ordering of copy_page_range() is
odd.  Since working at it, reorder the parameters to be logical, by (1)
always put the dst_* fields to be before src_* fields, and (2) keep the
same type of parameters together.

[peterx@redhat.com: further reorder some parameters and line format, per Jason]
Link: https://lkml.kernel.org/r/20201002192647.7161-1-peterx@redhat.com
[peterx@redhat.com: fix warnings]
Link: https://lkml.kernel.org/r/20201006200138.GA6026@xz-x1
Reported-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20200930204950.6668-1-peterx@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: replace do_brk with do_brk_flags in comment of insert_vm_struct()

Replace do_brk with do_brk_flags in comment of insert_vm_struct(), since
do_brk was removed in following commit.

Fixes: bb177a732c4369 ("mm: do not bug_on on incorrect length in __mm_populate()")
Signed-off-by: Liao Pingfang <liao.pingfang@zte.com.cn>
Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/1600650778-43230-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap.c: use helper function allow_write_access() in __remove_shared_vm_struct()

In commit 1da177e4c3f4 ("Linux-2.6.12-rc2"), the helper allow_write_access
came with the atomic_inc operation of the i_writecount field in the func
__remove_shared_vm_struct().  But it forgot to use this helper function.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200921115814.39680-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: use helper function mapping_allow_writable()

Commit 4bb5f5d9395b ("mm: allow drivers to prevent new writable mappings")
changed i_mmap_writable from unsigned int to atomic_t and add the helper
function mapping_allow_writable() to atomic_inc i_mmap_writable.  But it
forgot to use this helper function in dup_mmap() and __vma_link_file().

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Christian Kellner <christian@kellner.me>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Adrian Reber <areber@redhat.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Aleksa Sarai <cyphar@cyphar.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200917112736.7789-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: check on file instead of the rb_root_cached of its address_space

In __vma_adjust(), we do the check on *root* to decide whether to adjust
the address_space.  It seems to be more meaningful to do the check on
*file* itself.  This means we are adjusting some data because it is a file
backed vma.

Since we seem to assume the address_space is valid if it is a file backed
vma, let's just replace *root* with *file* here.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200913133631.37781-2-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: not necessary to check mapping separately

*root* with type of struct rb_root_cached is an element of *mapping*
with type of struct address_space. This implies when we have a valid
*root* it must be a part of valid *mapping*.

So we can merge these two checks together to make the code more easy to
read and to save some cpu cycles.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200913133631.37781-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: fix spello of "function"

Fix typo/spello of "function".

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/e7bf180e-c558-b1d5-9a15-6d9708823c9c@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: leave adjust_next as virtual address instead of page frame number

Instead of converting adjust_next between bytes and pages number, let's
just store the virtual address into adjust_next.

Also, this patch fixes one typo in the comment of vma_adjust_trans_huge().

[vbabka@suse.cz: changelog tweak]

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Link: http://lkml.kernel.org/r/20200828081031.11306-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: simplify PageDoubleMap with PF_SECOND policy

Introduce the new page policy of PF_SECOND which lets us use the normal
pageflags generation machinery to create the various DoubleMap
manipulation functions.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Link: https://lkml.kernel.org/r/20200629151933.15671-3-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: move PageDoubleMap bit

Patch series "Fix PageDoubleMap".

This is a purely theoretical problem for now as none of the filesystems
which use PG_private_2 (ie PG_fscache) are being converted at this time,
but it's confusing to leave it like this.

This patch (of 2):

PG_private_2 is defined as being PF_ANY (applicable to tail pages as well
as regular & head pages).  That means that the first tail page of a
double-map page will appear to have Private2 set.  Use the Workingset bit
instead which is defined as PF_HEAD so any attempt to access the
Workingset bit on a tail page will redirect to the head page's Workingset
bit.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Link: https://lkml.kernel.org/r/20200629151933.15671-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20200629151933.15671-2-willy@infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: proc: smaps_rollup: do not stall write attempts on mmap_lock

smaps_rollup will try to grab mmap_lock and go through the whole vma list
until it finishes the iterating.  When encountering large processes, the
mmap_lock will be held for a longer time, which may block other write
requests like mmap and munmap from progressing smoothly.

There are upcoming mmap_lock optimizations like range-based locks, but the
lock applied to smaps_rollup would be the coarse type, which doesn't avoid
the occurrence of unpleasant contention.

To solve aforementioned issue, we add a check which detects whether anyone
wants to grab mmap_lock for write attempts.

Signed-off-by: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Steven Price <steven.price@arm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Song Liu <songliubraving@fb.com>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Link: http://lkml.kernel.org/r/1597715898-3854-4-git-send-email-chinwen.chang@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: smaps*: extend smap_gather_stats to support specified beginning

Extend smap_gather_stats to support indicated beginning address at which
it should start gathering.  To achieve the goal, we add a new parameter
@start assigned by the caller and try to refactor it for simplicity.

If @start is 0, it will use the range of @vma for gathering.

Signed-off-by: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Cc: Michel Lespinasse <walken@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1597715898-3854-3-git-send-email-chinwen.chang@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mmap locking API: add mmap_lock_is_contended()

Patch series "Try to release mmap_lock temporarily in smaps_rollup", v4.

Recently, we have observed some janky issues caused by unpleasantly long
contention on mmap_lock which is held by smaps_rollup when probing large
processes.  To address the problem, we let smaps_rollup detect if anyone
wants to acquire mmap_lock for write attempts.  If yes, just release the
lock temporarily to ease the contention.

smaps_rollup is a procfs interface which allows users to summarize the
process's memory usage without the overhead of seq_* calls.  Android uses
it to sample the memory usage of various processes to balance its memory
pool sizes.  If no one wants to take the lock for write requests,
smaps_rollup with this patch will behave like the original one.

Although there are on-going mmap_lock optimizations like range-based
locks, the lock applied to smaps_rollup would be the coarse one, which is
hard to avoid the occurrence of aforementioned issues.  So the detection
and temporary release for write attempts on mmap_lock in smaps_rollup is
still necessary.

This patch (of 3):

Add new API to query if someone wants to acquire mmap_lock for write
attempts.

Using this instead of rwsem_is_contended makes it more tolerant of future
changes to the lock type.

Signed-off-by: Chinwen Chang <chinwen.chang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Acked-by: Michel Lespinasse <walken@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Daniel Kiss <daniel.kiss@arm.com>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jimmy Assarsson <jimmyassarsson@gmail.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Link: http://lkml.kernel.org/r/1597715898-3854-1-git-send-email-chinwen.chang@mediatek.com
Link: http://lkml.kernel.org/r/1597715898-3854-2-git-send-email-chinwen.chang@mediatek.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: leverage vma_rb_erase_ignore() to implement vma_rb_erase()

These two functions share the same logic except ignore a different vma.

Let's reuse the code.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200809232057.23477-2-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/mmap: rename __vma_unlink_common() to __vma_unlink()

__vma_unlink_common() and __vma_unlink() are counterparts.  Since there is
no function named __vma_unlink(), let's rename __vma_unlink_common() to
__vma_unlink() to make the code more self-explanatory and easy for
audience to understand.

Otherwise we may expect there are several variants of vma_unlink() and
__vma_unlink_common() is used by them.

Signed-off-by: Wei Yang <richard.weiyang@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lkml.kernel.org/r/20200809232057.23477-1-richard.weiyang@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: replace vmf->vma with variable vma

The code has declared a vma_struct named vma which is assigned a value of
vmf->vma.  Thus, use variable vma directly here.

Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: http://lkml.kernel.org/r/20200818084607.37616-1-yanfei.xu@windriver.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memory.c: fix typo in __do_fault() comment

It's "pte_alloc_one", not "pte_alloc_pne". Let's fix that.

Signed-off-by: Yanfei Xu <yanfei.xu@windriver.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Link: http://lkml.kernel.org/r/20200818104339.5310-1-yanfei.xu@windriver.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: account PMD tables like PTE tables

We account the PTE level of the page tables to the process in order to
make smarter OOM decisions and help diagnose why memory is fragmented.
For these same reasons, we should account pages allocated for PMDs.  With
larger process address spaces and ASLR, the number of PMDs in use is
higher than it used to be so the inaccuracy is starting to matter.

[rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor]
Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Anders Roxell <anders.roxell@linaro.org>
Link: http://lkml.kernel.org/r/20200627184642.GF25039@casper.infradead.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: fix incorrect gcc invocation in some cases

Avoid accidental wrong builds, due to built-in rules working just a little
bit too well--but not quite as well as required for our situation here.

In other words, "make userfaultfd" (for example) is supposed to fail to
build at all, because this Makefile only supports either "make" (all), or
"make /full/path".  However, the built-in rules, if not suppressed, will
pick up CFLAGS and the initial LDLIBS (but not the target-specific LDLIBS,
because those are only set for the full path target!).  This causes it to
get pretty far into building things despite using incorrect values such as
an *occasionally* incomplete LDLIBS value.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lkml.kernel.org/r/20200915012901.1655280-3-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

selftests/vm: fix false build success on the second and later attempts

Patch series "selftests/vm: fix some minor aggravating factors in the Makefile".

This fixes a couple of minor aggravating factors that I ran across while
trying to do some changes in selftests/vm.  These are simple things, but
like most things with GNU Make, it's rarely obvious what's wrong until you
understand *the entire Makefile and all of its includes*.

So while there is, of course, joy in learning those details, I thought I'd
fix these little things, so as to allow others to skip out on the Joy if
they so choose.  :)

First of all, if you have an item (let's choose userfaultfd for an
example) that fails to build, you might do this:

$ make -j32

    # ...you observe a failed item in the threaded output

# OK, let's get a closer look

$ make
    # ...but now the build quietly "succeeds".

That's what Patch 0001 fixes.

Second, if you instead attempt this approach for your closer look (a casual
mistake, as it's not supported):

$ make userfaultfd

    # ...userfaultfd fails to link, due to incomplete LDLIBS

That's what Patch 0002 fixes.

This patch (of 2):

If one or more of these selftest fail to build, then after the first
failure, subsequent invocations of "make" will make it appear that there
are no build failures, after all.

That's because the failed build products remain, with up-to-date
timestamps, thus tricking Make (and you!) into believing that there's
nothing else to build.

Fix this by telling Make to delete targets that didn't completely
succeed.

Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Link: https://lkml.kernel.org/r/20200915012901.1655280-1-jhubbard@nvidia.com
Link: https://lkml.kernel.org/r/20200915012901.1655280-2-jhubbard@nvidia.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: fix device private memcg accounting

The code in mc_handle_swap_pte() checks for non_swap_entry() and returns
NULL before checking is_device_private_entry() so device private pages are
never handled.  Fix this by checking for non_swap_entry() after handling
device private swap PTEs.

I assume the memory cgroup accounting would be off somehow when moving
a process to another memory cgroup.  Currently, the device private page
is charged like a normal anonymous page when allocated and is uncharged
when the page is freed so I think that path is OK.

Signed-off-by: Ralph Campbell <rcampbell@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Link: https://lkml.kernel.org/r/20201009215952.2726-1-rcampbell@nvidia.com
xFixes: c733a82874a7 ("mm/memcontrol: support MEMORY_DEVICE_PRIVATE")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcg/slab: uncharge during kmem_cache_free_bulk()

Object cgroup charging is done for all the objects during allocation, but
during freeing, uncharging ends up happening for only one object in the
case of bulk allocation/freeing.

Fix this by having a separate call to uncharge all the objects from
kmem_cache_free_bulk() and by modifying memcg_slab_free_hook() to take
care of bulk uncharging.

Fixes: 964d4bd370d5 ("mm: memcg/slab: save obj_cgroup for non-root slab objects"
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Roman Gushchin <guro@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/20201009060423.390479-1-bharata@linux.ibm.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: reword obsolete comment of mem_cgroup_unmark_under_oom()

Since commit 79dfdaccd1d5 ("memcg: make oom_lock 0 and 1 based rather than
counter"), the mem_cgroup_unmark_under_oom() is added and the comment of
the mem_cgroup_oom_unlock() is moved here.  But this comment make no sense
here because mem_cgroup_oom_lock() does not operate on under_oom field.
So we reword the comment as this would be helpful.  [Thanks Michal Hocko
for rewording this comment.]

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Link: https://lkml.kernel.org/r/20200930095336.21323-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_counter: correct the obsolete func name in the comment of page_counter_try_charge()

Since commit bbec2e15170a ("mm: rename page_counter's count/limit into
usage/max"), page_counter_limit() is renamed to page_counter_set_max().
So replace page_counter_limit with page_counter_set_max in comment.

Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20200917113629.14382-1-linmiaohe@huawei.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: memcontrol: add the missing numa_stat interface for cgroup v2

In the cgroup v1, we have a numa_stat interface.  This is useful for
providing visibility into the numa locality information within an memcg
since the pages are allowed to be allocated from any physical node.  One
of the use cases is evaluating application performance by combining this
information with the application's CPU allocation.  But the cgroup v2 does
not.  So this patch adds the missing information.

Suggested-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Link: https://lkml.kernel.org/r/20200916100030.71698-2-songmuchun@bytedance.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/memcg: unify swap and memsw page counters

The swap page counter is v2 only while memsw is v1 only.  As v1 and v2
controllers cannot be active at the same time, there is no point to keep
both swap and memsw page counters in mem_cgroup.  The previous patch has
made sure that memsw page counter is updated and accessed only when in v1
code paths.  So it is now safe to alias the v1 memsw page counter to v2
swap page counter.  This saves 14 long's in the size of mem_cgroup.  This
is a saving of 112 bytes for 64-bit archs.

While at it, also document which page counters are used in v1 and/or v2.

Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Chris Down <chris@chrisdown.name>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: https://lkml.kernel.org/r/20200914024452.19167-4-longman@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>