include/uapi/linux/swab: Fix potentially missing __always_inline

[ Upstream commit defbab270d45e32b068e7e73c3567232d745c60f ]

Commit bc27fb68aaad ("include/uapi/linux/byteorder, swab: force inlining
of some byteswap operations") added __always_inline to swab functions
and commit 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to
userspace headers") added a definition of __always_inline for use in
exported headers when the kernel's compiler.h is not available.

However, since swab.h does not include stddef.h, if the header soup does
not indirectly include it, the definition of __always_inline is missing,
resulting in a compilation failure, which was observed compiling the
perf tool using exported headers containing this commit:

In file included from /usr/include/linux/byteorder/little_endian.h:12:0,
                 from /usr/include/asm/byteorder.h:14,
                 from tools/include/uapi/linux/perf_event.h:20,
                 from perf.h:8,
                 from builtin-bench.c:18:
/usr/include/linux/swab.h:160:8: error: unknown type name `__always_inline'
 static __always_inline __u16 __swab16p(const __u16 *p)

Fix this by replacing the inclusion of linux/compiler.h with
linux/stddef.h to ensure that we pick up that definition if required,
without relying on it's indirect inclusion. compiler.h is then included
indirectly, via stddef.h.

Fixes: 283d75737837 ("uapi/linux/stddef.h: Provide __always_inline to userspace headers")
Signed-off-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Petr Vaněk <arkamar@atlas.cz>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: usb: Fix clock imbalance for suspend/resume

[ Upstream commit 8484199c09347bdd5d81ee8a2bc530850f900797 ]

We should be disabling clocks when wake from USB is not needed. Since
this wasn't done, we had a clock imbalance since clocks were always
being enabled on resume.

Fixes: ae532b2b7aa5 ("phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
Fixes: b0c0b66c0b43 ("phy: usb: Add support for wake and USB low power mode for 7211 S2/S5")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-7-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: usb: Use slow clock for wake enabled suspend

[ Upstream commit 700c44b508020a3ea29d297c677f8d4ab14b7e6a ]

The logic was incorrect when switching to slow clock. We want the slow
clock if wake_enabled is set.

Fixes: ae532b2b7aa5 ("phy: usb: Add "wake on" functionality for newer Synopsis XHCI controllers")
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-6-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: usb: s2 WoL wakeup_count not incremented for USB->Eth devices

[ Upstream commit f7fc5b7090372fc4dd7798c874635ca41b8ba733 ]

The PHY's "wakeup_count" is not incrementing when waking from
WoL. The wakeup count can be found in sysfs at:
/sys/bus/platform/devices/rdb/*.usb-phy/power/wakeup_count.
The problem is that the system wakup event handler was being passed
the wrong "device" by the PHY driver.

Fixes: f1c0db40a3ad ("phy: usb: Add "wake on" functionality")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/1665005418-15807-3-git-send-email-justinpopo6@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: fix sc8280xp PCS_USB offset

[ Upstream commit 4c6b3af3906d0c59497d3bfb07760f3a082b4150 ]

The PCS_USB register block lives at an offset of 0x1000 from the PCS
region on SC8280XP so add the missing offset to avoid corrupting
unrelated registers on runtime suspend.

Note that the current binding is broken as it does not describe the
PCS_USB region and the PCS register size does not cover PCS_USB and the
regions in between. As Linux currently maps full pages, simply adding
the offset to driver works until the binding has been fixed.

Fixes: c0c7769cdae2 ("phy: qcom-qmp: Add SC8280XP USB3 UNI phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221028160435.26948-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Make read buffer sysfs attributes invisible for Intel IAA

[ Upstream commit 9a8ddb35a9d5d3ad76784a012459b256a9d7de7e ]

In current code, the following sysfs attributes are exposed to user to
show or update the values:
  max_read_buffers (max_tokens)
  read_buffer_limit (token_limit)
  group/read_buffers_allowed (group/tokens_allowed)
  group/read_buffers_reserved (group/tokens_reserved)
  group/use_read_buffer_limit (group/use_token_limit)

>From Intel IAA spec [1], Intel IAA does not support Read Buffer
allocation control. So these sysfs attributes should not be supported on
IAA device.

Fix this issue by making these sysfs attributes invisible through
is_visible() filter when the device is IAA.

Add description in the ABI documentation to mention that these
attributes are not visible when the device does not support Read Buffer
allocation control.

[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858

Fixes: fde212e44f45 ("dmaengine: idxd: deprecate token sysfs attributes for read buffers")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20221022074949.11719-1-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/rockchip: fix permission bits in page table entries v2

[ Upstream commit 7eb99841f340b80be0d0973b0deb592d75fb8928 ]

As pointed out in the corresponding downstream fix [0], the permission bits
of the page table entries are compatible between v1 and v2 of the IOMMU.
This is in contrast to the current mainline code that incorrectly assumes
that the read and write permission bits are switched. Fix the permission
bits by reusing the v1 bit defines.

[0] https://github.com/rockchip-linux/kernel/commit/e3bc123a2260145e34b57454da3db0edd117eb8e

Fixes: c55356c534aa ("iommu: rockchip: Add support for iommu v2")
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20221102063553.2464161-1-michael.riesch@wolfvision.net
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Implement .iotlb_sync_map

[ Upstream commit e563cc0c787c85a4d9def0a77078dc5d3f445e3d ]

Allocated iova ranges need to be invalidated immediately or otherwise
they might or might not work when used by master or CPU. This was
discovered when running video decoder conformity test with Cedrus. Some
videos were now and then decoded incorrectly and generated page faults.

According to vendor driver, it's enough to invalidate just start and end
TLB and PTW cache lines. Documentation says that neighbouring lines must
be invalidated too. Finally, when page fault occurs, that iova must be
invalidated the same way, according to documentation.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-6-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix flush size

[ Upstream commit 67a8a67f9eceb72e4c73d1d09ed9ab04f4b8e12d ]

Function sun50i_table_flush() takes number of entries as an argument,
not number of bytes. Fix that mistake in sun50i_dte_get_page_table().

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-5-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix R/W permission check

[ Upstream commit eac0104dc69be50bed86926d6f32e82b44f8c921 ]

Because driver has enum type permissions and iommu subsystem has bitmap
type, we have to be careful how check for combined read and write
permissions is done. In such case, we have to mask both permissions and
check that both are set at the same time.

Current code just masks both flags but doesn't check that both are set.
In short, it always sets R/W permission, regardles if requested
permissions were RO, WO or RW. Fix that.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-4-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Consider all fault sources for reset

[ Upstream commit cef20703e2b2276aaa402ec5a65ec9a09963b83e ]

We have to reset masters for all faults - permissions, L1 fault or L2
fault. Currently it's done only for permissions. If other type of fault
happens, master is in locked up state. Fix that by really considering
all fault sources.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-3-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/sun50i: Fix reset release

[ Upstream commit 9ad0c1252e84dbc664f0462707182245ed603237 ]

Reset signal is asserted by writing 0 to the corresponding locations of
masters we want to reset. So in order to deassert all reset signals, we
should write 1's to all locations.

Current code writes 1's to locations of masters which were just reset
which is good. However, at the same time it also writes 0's to other
locations and thus asserts reset signals of remaining masters. Fix code
by writing all 1's when we want to deassert all reset signals.

This bug was discovered when working with Cedrus (video decoder). When
it faulted, display went blank due to reset signal assertion.

Fixes: 4100b8c229b3 ("iommu: Add Allwinner H6 IOMMU driver")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20221025165415.307591-2-jernej.skrabec@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iommu/s390: Fix duplicate domain attachments

[ Upstream commit bf8d2dd2ed0825a58f31cc510245a1eb46f8a87e ]

Since commit fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev
calls") we can end up with duplicates in the list of devices attached to
a domain. This is inefficient and confusing since only one domain can
actually be in control of the IOMMU translations for a device. Fix this
by detaching the device from the previous domain, if any, on attach.
Add a WARN_ON() in case we still have attached devices on freeing the
domain. While here remove the re-attach on failure dance as it was
determined to be unlikely to help and may confuse debug and recovery.

Fixes: fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20221025115657.1666860-2-schnelle@linux.ibm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY

[ Upstream commit 922adfd59efd337059f8445a8d8968552b06ed4e ]

According to the kernel 4.4 sources from NHSS.QSDK.9.0.2 and according
to hardware docs, the PHY registers layout used for IPQ8074 USB3 PHY is
incorrect. This platform uses offset 0x174 for the PCS_STATUS register,
0xd8 for PCS_AUTONOMOUS_MODE_CTRL, etc.

Correct the PHY registers layout.

Fixes: 94a407cc17a4 ("phy: qcom-qmp: create copies of QMP PHY driver")
Fixes: 507156f5a99f ("phy: qcom-qmp: Add USB QMP PHY support for IPQ8074")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Kathiravan T<quic_kathirav@quicinc.com>
Link: https://lore.kernel.org/r/20220929190017.529207-1-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: drop start and pwrdn-ctrl abstraction

[ Upstream commit 47b009db545ae90f0b50149029a6b8137685f524 ]

Drop the start and pwrdn-ctrl abstractions which are no longer needed
since the QMP driver split.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-20-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: clean up status polling

[ Upstream commit f5ef85adece529a6cd1e7563081c41038923a9ed ]

Clean up the PHY status polling by dropping the configuration mask which
is no longer needed since the QMP driver split.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-13-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: drop power-down delay config

[ Upstream commit 38cd167d1fc6b5bf038229b1fa02bb1f551a564f ]

The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).

The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).

Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-15-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: drop sc8280xp power-down delay

[ Upstream commit 898ab85d6b1e8f6271d180c47ef8a024dea9e357 ]

The SC8280XP PHY does not need a delay before starting the PHY (which is
what the has_pwrdn_delay config option really controls) so drop the
unnecessary delay.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-14-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-usb: clean up power-down handling

[ Upstream commit 645d3d04702401e002928b934b830bd25be9e277 ]

Always define the POWER_DOWN_CONTROL register instead of falling back to
the v2 (and v3) offset during power on and power off.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 922adfd59efd ("phy: qcom-qmp-usb: correct registers layout for IPQ8074 USB3 PHY")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: fix ipq6018 initialisation

[ Upstream commit 30518b19895789aa9101474af2ee0f62cd882d5e ]

The phy_status mask was never set for IPQ6018 which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.

Fixes: 520264db3bf9 ("phy: qcom-qmp: add QMP V2 PCIe PHY support for ipq60xx")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-3-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: fix ipq8074-gen3 initialisation

[ Upstream commit 94b7288eadf6e2c09e6280c65a9d07cca01bf434 ]

The phy_status mask was never set for IPQ8074 (gen3) which meant that
the driver would not wait for the PHY to be initialised during power-on
and would never detect PHY initialisation timeouts.

Fixes: 334fad185415 ("phy: qcom-qmp-pcie: add IPQ8074 PCIe Gen3 QMP PHY support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-2-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: fix sc8180x initialisation

[ Upstream commit 4a9eac5ae2200f1b208dd33738777f89f93dc0fe ]

The phy_status mask was never set for SC8180X which meant that the
driver would not wait for the PHY to be initialised during power-on and
would never detect PHY initialisation timeouts.

Fixes: f839f14e24f2 ("phy: qcom-qmp: Add sc8180x PCIe support")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012085002.24099-1-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: replace power-down delay

[ Upstream commit 51bd33069f80705aba5f4725287bc5688ca6d92a ]

The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).

The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).

But as the vendor kernel do have a 1 ms delay *after* starting the PHY
and before starting to poll the status it is possible that later
contributors have simply not noticed that the mainline power-down delay
is not equivalent.

As the current delay before even starting the PHY is pretty much
pointless and likely a mistake, move the delay after starting the PHY
which avoids a few iterations of polling and speeds up startup by 1 ms
(the poll loop otherwise takes about 1.8 ms).

Note that MSM8998 has never used a power-down delay so add a flag to
skip the delay in case starting the PHY is faster on MSM8998. This can
be removed after someone takes a measurement.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20221012081241.18273-10-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 4a9eac5ae220 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: drop power-down delay config

[ Upstream commit e71906144b432135b483e228d65be59fbb44c310 ]

The power-down delay was included in the first version of the QMP driver
as an optional delay after powering on the PHY (using
POWER_DOWN_CONTROL) and just before starting it. Later changes modified
this sequence by powering on before initialising the PHY, but the
optional delay stayed where it was (i.e. before starting the PHY).

The vendor driver does not use a delay before starting the PHY and this
is likely not needed on any platform unless there is a corresponding
delay in the vendor kernel init sequence tables (i.e. in devicetree).

Let's keep the delay for now, but drop the redundant delay period
configuration while increasing the unnecessarily low timer slack
somewhat.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221012081241.18273-9-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Stable-dep-of: 4a9eac5ae220 ("phy: qcom-qmp-pcie: fix sc8180x initialisation")
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: core: Auto select rproc-virtio device id

[ Upstream commit 65fcf3872f83d63fb7268e05d4b02640df14126e ]

With multiple remoteproc device, there will below error:

sysfs: cannot create duplicate filename '/bus/platform/devices/rproc-virtio.0'

The rvdev_data.index is duplicate, that cause issue, so
need to use the PLATFORM_DEVID_AUTO instead. After fixing
device name it becomes something like:
/bus/platform/devices/rproc-virtio.2.auto

Fixes: 1d7b61c06dc3 ("remoteproc: virtio: Create platform device for the remoteproc_virtio")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Tested-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1666100644-27010-1-git-send-email-shengjiu.wang@nxp.com
[Fixed typographical error in comment block]
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: apple-admac: Allocate cache SRAM to channels

[ Upstream commit 568aa6dd641f63166bb60d769e256789b3ac42d4 ]

There's a previously unknown part of the controller interface: We have
to assign SRAM carveouts to channels to store their in-flight samples
in. So, obtain the size of the SRAM from a read-only register and divide
it into 2K blocks for allocation to channels. The FIFO depths we
configure will always fit into 2K.

(This fixes audio artifacts during simultaneous playback/capture on
multiple channels -- which looking back is fully accounted for by having
had the caches in the DMA controller overlap in memory.)

Fixes: b127315d9a78 ("dmaengine: apple-admac: Add Apple ADMAC driver")
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221019132324.8585-2-povik+lin@cutebit.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: idxd: Make max batch size attributes in sysfs invisible for Intel IAA

[ Upstream commit 91123b37e8a99cc489d5bdcfebd1c25f29382504 ]

In current code, dev.max_batch_size and wq.max_batch_size attributes in
sysfs are exposed to user to show or update the values.

>From Intel IAA spec [1], Intel IAA does not support batch processing. So
these sysfs attributes should not be supported on IAA device.

Fix this issue by making the attributes of max_batch_size invisible in
sysfs through is_visible() filter when the device is IAA.

Add description in the ABI documentation to mention that the attributes
are not visible when the device does not support batch.

[1]: https://cdrdv2.intel.com/v1/dl/getContent/721858

Fixes: e7184b159dd3 ("dmaengine: idxd: add support for configurable max wq batch size")
Fixes: c52ca478233c ("dmaengine: idxd: add configuration component of driver")
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20220930201528.18621-3-xiaochen.shen@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: qcom-qmp-pcie: drop bogus register update

[ Upstream commit 2d93887cb4bac0a36ce9e146956f631ab7994680 ]

Since commit 0d58280cf1e6 ("phy: Update PHY power control sequence") the
PHY is powered on before configuring the registers and only the MSM8996
PCIe PHY, which includes the POWER_DOWN_CONTROL register in its PCS
initialisation table, may possibly require a second update afterwards.

To make things worse, the POWER_DOWN_CONTROL register lies at a
different offset on more recent SoCs so that the second update, which
still used a hard-coded offset, would write to an unrelated register
(e.g. a revision-id register on SC8280XP).

As the MSM8996 PCIe PHY is now handled by a separate driver, simply drop
the bogus register update.

Fixes: e4d8b05ad5f9 ("phy: qcom-qmp: Use proper PWRDOWN offset for sm8150 USB") added support
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #RB3
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20221017065013.19647-12-johan+linaro@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: marvell: phy-mvebu-a3700-comphy: Reset COMPHY registers before USB 3.0 power on

[ Upstream commit b01d622d76134e9401970ffd3fbbb9a7051f976a ]

Turris MOX board with older ARM Trusted Firmware version v1.5 is not able
to detect any USB 3.0 device connected to USB-A port on Mox-A module after
commit 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken
reset support"). On the other hand USB 2.0 devices connected to the same
USB-A port are working fine.

It looks as if the older firmware configures COMPHY registers for USB 3.0
somehow incompatibly for kernel driver. Experiments show that resetting
COMPHY registers via setting SFT_RST auto-clearing bit in COMPHY_SFT_RESET
register fixes this issue.

Reset the COMPHY in mvebu_a3700_comphy_usb3_power_on() function as a first
step after selecting COMPHY lane and USB 3.0 function. With this change
Turris MOX board can successfully detect USB 3.0 devices again.

Before the above mentioned commit this reset was implemented in PHY reset
method, so this is the reason why there was no issue with older firmware
version then.

Fixes: 0a6fc70d76bd ("phy: marvell: phy-mvebu-a3700-comphy: Remove broken reset support")
Reported-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20220920121154.30115-1-pali@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Harden against integer overflows

[ Upstream commit e001e60869390686809663c02bceb1d3922548fb ]

Smatch complains that the "add_bytes" is not to be trusted.  Use
size_add() to prevent an integer overflow.

Fixes: be71b5cba2e6 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/ntfs3: Avoid UBSAN error on true_sectors_per_clst()

[ Upstream commit caad9dd8792a2622737b7273cb34835fd9536cd2 ]

syzbot reported UBSAN error as below:

[   76.901829][ T6677] ================================================================================
[   76.903908][ T6677] UBSAN: shift-out-of-bounds in fs/ntfs3/super.c:675:13
[   76.905363][ T6677] shift exponent -247 is negative

This patch avoid this error.

Link: https://syzkaller.appspot.com/bug?id=b0299c09a14aababf0f1c862dd4ebc8ab9eb0179
Fixes: a3b774342fa7 (fs/ntfs3: validate BOOT sectors_per_clusters)
Cc: Author: Randy Dunlap <rdunlap@infradead.org>
Reported-by: syzbot+35b87c668935bb55e666@syzkaller.appspotmail.com
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/siw: Fix pointer cast warning

[ Upstream commit 5244ca88671a1981ceec09c5c8809f003e6a62aa ]

The previous build fix left a remaining issue in configurations with
64-bit dma_addr_t on 32-bit architectures:

drivers/infiniband/sw/siw/siw_qp_tx.c: In function 'siw_get_pblpage':
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
   32 |                 return virt_to_page((void *)paddr);
      |                                     ^

Use the same double cast here that the driver uses elsewhere to convert
between dma_addr_t and void*.

Fixes: 0d1b756acf60 ("RDMA/siw: Pass a pointer to virt_to_page()")
Link: https://lore.kernel.org/r/20221215170347.2612403-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Bernard Metzler <bmt@zurich.ibm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Do not delay the workload with --delay

[ Upstream commit c587e77e100fa40eb6af10e00497c67acf493f33 ]

The -D/--delay option is to delay the measure after the program starts.
But the current code goes to sleep before starting the program so the
program is delayed too.  This is not the intention, let's fix it.

Before:

  $ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
  Events disabled
  Events enabled

   Performance counter stats for 'system wide':

       4,326,949,337      cycles

         4.007494118 seconds time elapsed

  real 0m7.474s
  user 0m0.356s
  sys 0m0.120s

It ran the workload for 4 seconds and gave the 3 second delay.  So it
should skip the first 3 second and measure the last 1 second only.  But
as you can see, it delays 3 seconds and ran the workload after that for
4 seconds.  So the total time (real) was 7 seconds.

After:

  $ time sudo ./perf stat -a -e cycles -D 3000 sleep 4
  Events disabled
  Events enabled

   Performance counter stats for 'system wide':

       1,063,551,013      cycles

         1.002769510 seconds time elapsed

  real 0m4.484s
  user 0m0.385s
  sys 0m0.086s

The bug was introduced when it changed enablement of system-wide events
with a command line workload.  But it should've considered the initial
delay case.  The code was reworked since then (in bb8bc52e7578) so I'm
afraid it won't be applied cleanly.

Fixes: d0a0a511493d2695 ("perf stat: Fix forked applications enablement of counters")
Reported-by: Kevin Nomura <nomurak@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Link: https://lore.kernel.org/r/20221212230820.901382-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ftrace: Allow WITH_ARGS flavour of graph tracer with shadow call stack

[ Upstream commit 38792972de4294163f44d6360fd221e6f2c22a05 ]

The recent switch on arm64 from DYNAMIC_FTRACE_WITH_REGS to
DYNAMIC_FTRACE_WITH_ARGS failed to take into account that we currently
require the former in order to allow the function graph tracer to be
enabled in combination with shadow call stacks. This means that this is
no longer permitted at all, in spite of the fact that either flavour of
ftrace works perfectly fine in this combination.

So permit WITH_ARGS as well as WITH_REGS.

Fixes: ddc9863e9e90 ("scs: Disable when function graph tracing is enabled")
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20221213132407.1485025-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf off_cpu: Fix a typo in BTF tracepoint name, it should be 'btf_trace_sched_switch'

[ Upstream commit 167b266bf66c5b93171011ef9d1f09b070c2c537 ]

In BTF, tracepoint definitions have the "btf_trace_" prefix.  The
off-cpu profiler needs to check the signature of the sched_switch event
using that definition.  But there's a typo (s/bpf/btf/) so it failed
always.

Fixes: b36888f71c8542cd ("perf record: Handle argument change in sched_switch")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: bpf@vger.kernel.org
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20221208182636.524139-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

leds: is31fl319x: Fix setting current limit for is31fl319{0,1,3}

[ Upstream commit 135780f1048b3f956f5b10bb23dec9c2d2c4ef6d ]

The current setting lives in bits 4:2 (as also defined by the mask) but
the current limit defines in the driver use bits 2:0 which should be
shifted over so they don't get masked out completely (except for 17.5mA
which became 10mA).

Now checking /sys/kernel/debug/regmap/1-0068/registers shows that the
current limit is applied correctly and doesn't take the default b000 =
42mA.

Fixes: fa877cf1abb9 ("leds: is31fl319x: Add support for is31fl319{0,1,3} chips")
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Vincent Knecht <vincent.knecht@mailoo.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: Partially revert gfs2_inode_lookup change

[ Upstream commit 88f4a9f813c549f6b8a6fbf12030949b48a4d5a4 ]

Commit c412a97cf6c5 changed delete_work_func() to always perform an
inode lookup when gfs2_try_evict() fails.  This doesn't make sense as a
gfs2_try_evict() failure indicates that the inode is likely still in
use.  Revert that change.

Fixes: c412a97cf6c5 ("gfs2: Use TRY lock in gfs2_inode_lookup for UNLINKED inodes")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: fix null pointer dereferencing in power_supply_get_battery_info

[ Upstream commit 104bb8a663451404a26331263ce5b96c34504049 ]

when kmalloc() fail to allocate memory in kasprintf(), propname
will be NULL, strcmp() called by of_get_property() will cause
null pointer dereference.

So return ENOMEM if kasprintf() return NULL pointer.

Fixes: 3afb50d7125b ("power: supply: core: Add some helpers to use the battery OCV capacity table")
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf branch: Fix interpretation of branch records

[ Upstream commit 20ed9fa4965875fdde5bfd65d838465e38d46b22 ]

Commit 93315e46b000fc80 ("perf/core: Add speculation info to branch
entries") added a new field in between type and new_type. Perf has its
own copy of this struct so update it to match the kernel side.

This doesn't currently cause any issues because new_type is only used by
the Arm BRBE driver which isn't merged yet.

Committer notes:

Is this really an ABI? How are we supposed to deal with old perf.data
files with new tools and vice versa? :-\

Fixes: 93315e46b000fc80 ("perf/core: Add speculation info to branch entries")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: James Clark <james.clark@arm.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sandipan Das <sandipan.das@amd.com>
Link: https://lore.kernel.org/r/20221130165158.517385-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq25890: Ensure pump_express_work is cancelled on remove

[ Upstream commit a7aaa80098d5b7608b2dc1e883e3c3f929415243 ]

The pump_express_work which gets queued from an external_power_changed
callback might be pending / running on remove() (or on probe failure).

Add a devm action cancelling the work, to ensure that it is cancelled.

Note the devm action is added before devm_power_supply_register(), making
it run after devm unregisters the power_supply, so that the work cannot
be queued anymore (this is also why a devm action is used for this).

Fixes: 48f45b094dbb ("power: supply: bq25890: Support higher charging voltages through Pump Express+ protocol")
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq25890: Convert to i2c's .probe_new()

[ Upstream commit c5cddca2351b291c8787b45cd046b1dfeb86979f ]

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: bq25890: Factor out regulator registration code

[ Upstream commit 5f5c10ecaf3fdeba9b2b0af5301977420c2c4df0 ]

Pull the regulator registration code into separate function, so it can
be extended to register more regulators later. Currently this is only
moving ifdeffery into one place and other preparatory changes. The
dev_err_probe() output string is changed to explicitly list vbus
regulator failure, so that once more regulators are registered, it
would be clear which one failed.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Stable-dep-of: a7aaa80098d5 ("power: supply: bq25890: Ensure pump_express_work is cancelled on remove")
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: Fix refcount leak in rk817_charger_probe

[ Upstream commit 54c03bfd094fb74f9533a9c28250219afe182382 ]

of_get_child_by_name() returns a node pointer with refcount
incremented, we should use of_node_put() on it when not need anymore.
Add missing of_node_put() to avoid refcount leak.

Fixes: 11cb8da0189b ("power: supply: Add charger driver for Rockchip RK817")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Reviewed-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: ab8500: Fix error handling in ab8500_charger_init()

[ Upstream commit c4d33381b134da188ccd1084aef21e2b8c3c422e ]

The ab8500_charger_init() returns the platform_driver_register() directly
without checking its return value, if platform_driver_register() failed,
all ab8500_charger_component_drivers are not unregistered.

Fix by unregister ab8500_charger_component_drivers when
platform_driver_register() failed.

Fixes: 1c1f13a006ed ("power: supply: ab8500: Move to componentized binding")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: Fix error handling in ssi_init()

[ Upstream commit 3ffa9f713c39a213a08d9ff13ab983a8aa5d8b5d ]

The ssi_init() returns the platform_driver_register() directly without
checking its return value, if platform_driver_register() failed, the
ssi_pdriver is not unregistered.
Fix by unregister ssi_pdriver when the last platform_driver_register()
failed.

Fixes: 0fae198988b8 ("HSI: omap_ssi: built omap_ssi and omap_ssi_port into one module")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: cw2015: Fix potential null-ptr-deref in cw_bat_probe()

[ Upstream commit 97f2b4ddb0aa700d673691a7d5e44d226d22bab7 ]

cw_bat_probe() calls create_singlethread_workqueue() and not checked the
ret value, which may return NULL. And a null-ptr-deref may happen:

cw_bat_probe()
    create_singlethread_workqueue() # failed, cw_bat->wq is NULL
    queue_delayed_work()
        queue_delayed_work_on()
            __queue_delayed_work()  # warning here, but continue
                __queue_work()      # access wq->flags, null-ptr-deref

Check the ret value and return -ENOMEM if it is NULL.

Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: z2_battery: Fix possible memleak in z2_batt_probe()

[ Upstream commit 955bee204f3dd307642c101b75e370662987e735 ]

If devm_gpiod_get_optional() returns error, the charger should be
freed before z2_batt_probe returns according to the context. We
fix it by just gotoing to 'err' branch.

Fixes: a3b4388ea19b ("power: supply: z2_battery: Convert to GPIO descriptors")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf symbol: correction while adjusting symbol

[ Upstream commit 6f520ce17920b3cdfbd2479b3ccf27f9706219d0 ]

perf doesn't provide proper symbol information for specially crafted
.debug files.

Sometimes .debug file may not have similar program header as runtime
ELF file. For example if we generate .debug file using objcopy
--only-keep-debug resulting file will not contain .text, .data and
other runtime sections. That means corresponding program headers will
have zero FileSiz and modified Offset.

Example: program header of text section of libxxx.so:

Type           Offset             VirtAddr           PhysAddr
               FileSiz            MemSiz              Flags  Align
LOAD        0x00000000003d3000 0x00000000003d3000 0x00000000003d3000
            0x000000000055ae80 0x000000000055ae80  R E    0x1000

Same program header after executing:
objcopy --only-keep-debug libxxx.so libxxx.so.debug

LOAD        0x0000000000001000 0x00000000003d3000 0x00000000003d3000
            0x0000000000000000 0x000000000055ae80  R E    0x1000

Offset and FileSiz have been changed.

Following formula will not provide correct value, if program header
taken from .debug file (syms_ss):

    sym.st_value -= phdr.p_vaddr - phdr.p_offset;

Correct program header information is located inside runtime ELF
file (runtime_ss).

Fixes: 2d86612aacb7805f ("perf symbol: Correct address for bss symbols")
Signed-off-by: Ajay Kaher <akaher@vmware.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Makhalov <amakhalov@vmware.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srivatsa S. Bhat <srivatsab@vmware.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Vasavi Sirnapalli <vsirnapalli@vmware.com>
Link: http://lore.kernel.org/lkml/1669198696-50547-1-git-send-email-akaher@vmware.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Handle failure when trace point folder is missed

[ Upstream commit 03e9a5d8eb552a1bf692a9c8a5ecd50f4e428006 ]

On Arm64 a case is perf tools fails to find the corresponding trace
point folder for system calls listed in the table 'syscalltbl_arm64',
e.g. the generated system call table contains "lookup_dcookie" but we
cannot find out the matched trace point folder for it.

We need to figure out if there have any issue for the generated system
call table, on the other hand, we need to handle the case when trace
point folder is missed under sysfs, this patch sets the flag
syscall::nonexistent as true and returns the error from
trace__read_syscall_info().

Another problem is for trace__syscall_info(), it returns two different
values if a system call doesn't exist: at the first time calling
trace__syscall_info() it returns NULL when the system call doesn't exist,
later if call trace__syscall_info() again for the same missed system
call, it returns pointer of syscall.  trace__syscall_info() checks the
condition 'syscalls.table[id].name == NULL', but the name will be
assigned in the first invoking even the system call is not found.

So checking system call's name in trace__syscall_info() is not the right
thing to do, this patch simply checks flag syscall::nonexistent to make
decision if a system call exists or not, finally trace__syscall_info()
returns the consistent result (NULL) if a system call doesn't existed.

Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Use macro RAW_SYSCALL_ARGS_NUM to replace number

[ Upstream commit eadcab4c7a66e1df03d32da0db55d89fd9343fcc ]

This patch defines a macro RAW_SYSCALL_ARGS_NUM to replace the open
coded number '6'.

Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: bpf@vger.kernel.org
Link: https://lore.kernel.org/r/20221121075237.127706-2-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: 03e9a5d8eb55 ("perf trace: Handle failure when trace point folder is missed")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf trace: Return error if a system call doesn't exist

[ Upstream commit d4223e1776c30b2ce8d0e6eaadcbf696e60fca3c ]

When a system call is not detected, the reason is either because the
system call ID is out of scope or failure to find the corresponding path
in the sysfs, trace__read_syscall_info() returns zero.  Finally, without
returning an error value it introduces confusion for the caller.

This patch lets the function trace__read_syscall_info() to return
-EEXIST when a system call doesn't exist.

Fixes: b8b1033fcaa091d8 ("perf trace: Mark syscall ids that are not allocated to avoid unnecessary error messages")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: bpf@vger.kernel.org
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221121075237.127706-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

watchdog: iTCO_wdt: Set NO_REBOOT if the watchdog is not already running

[ Upstream commit ef9b7bf52c2f47f0a9bf988543c577b92c92d15e ]

Daniel reported that the commit 1ae3e78c0820 ("watchdog: iTCO_wdt: No
need to stop the timer in probe") makes QEMU implementation of the iTCO
watchdog not to trigger reboot anymore when NO_REBOOT flag is initially
cleared using this option (in QEMU command line):

  -global ICH9-LPC.noreboot=false

The problem with the commit is that it left the unconditional setting of
NO_REBOOT that is not cleared anymore when the kernel keeps pinging the
watchdog (as opposed to the previous code that called iTCO_wdt_stop()
that cleared it).

Fix this so that we only set NO_REBOOT if the watchdog was not initially
running.

Fixes: 1ae3e78c0820 ("watchdog: iTCO_wdt: No need to stop the timer in probe")
Reported-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221028062750.45451-1-mika.westerberg@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

power: supply: fix residue sysfs file in error handle route of __power_supply_register()

[ Upstream commit 5b79480ce1978864ac3f06f2134dfa3b6691fe74 ]

If device_add() succeeds, we should call device_del() when want to
get rid of it, so move it into proper jump symbol.

Otherwise, when __power_supply_register() returns fail and goto
wakeup_init_failed to exit, there is still residue device file in sysfs.
When attempt to probe device again, sysfs would complain as below:

sysfs: cannot create duplicate filename '/devices/platform/i2c/i2c-0/0-001c/power_supply/adp5061'
Call Trace:
 dump_stack_lvl+0x68/0x85
 sysfs_warn_dup.cold+0x1c/0x29
 sysfs_create_dir_ns+0x1b1/0x1d0
 kobject_add_internal+0x143/0x390
 kobject_add+0x108/0x170

Fixes: 80c6463e2fa3 ("power_supply: Fix Oops from NULL pointer dereference from wakeup_source_activate")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: fix possible memory leak in ssi_probe()

[ Upstream commit 1aff514e1d2bd47854dbbdf867970b9d463d4c57 ]

If ssi_add_controller() returns error, it should call hsi_put_controller()
to give up the reference that was set in hsi_alloc_controller(), so that
it can call hsi_controller_release() to free controller and ports that
allocated in hsi_alloc_controller().

Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HSI: omap_ssi_core: fix unbalanced pm_runtime_disable()

[ Upstream commit f5181c35ed7ba0ceb6e42872aad1334d994b0175 ]

In error label 'out1' path in ssi_probe(), the pm_runtime_enable()
has not been called yet, so pm_runtime_disable() is not needed.

Fixes: b209e047bc74 ("HSI: Introduce OMAP SSI driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Move common code in print_metric_headers()

[ Upstream commit f4e55f88da923f39f0b76edc3da3c52d0b72d429 ]

The struct perf_stat_output_ctx is set in a loop with the same values.
Move the code out of the loop and keep the loop minimal.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221107213314.3239159-5-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: fdc7d6082459 ("perf stat: Fix --metric-only --json output")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf stat: Use evsel__is_hybrid() more

[ Upstream commit 93d5e700156e03e66eb1bf2158ba3b8a8b354c71 ]

In the stat-display code, it needs to check if the current evsel is
hybrid but it uses perf_pmu__has_hybrid() which can return true for
non-hybrid event too.  I think it's better to use evsel__is_hybrid().

Also remove a NULL check for the 'config' parameter in the
hybrid_merge() since it's called after config->no_merge check.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20221018020227.85905-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Stable-dep-of: fdc7d6082459 ("perf stat: Fix --metric-only --json output")
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf tools: Fix "kernel lock contention analysis" test by not printing warnings in quiet mode

[ Upstream commit 65319890c32db29fb56b41f84265a2c7029943f4 ]

Especially when CONFIG_LOCKDEP and other debug configs are enabled,
Perf can print the following warning when running the "kernel lock
contention analysis" test:

  Warning:
  Processed 1378918 events and lost 4 chunks!

  Check IO/CPU overload!

  Warning:
  Processed 4593325 samples and lost 70.00%!

The test already supplies -q to run in quiet mode, so extend quiet mode
to perf_stdio__warning() and also ui__warning() for consistency.

This fixes the following failure due to the extra lines counted:

  perf test "lock cont" -vvv

  82: kernel lock contention analysis test                            :
  --- start ---
  test child forked, pid 3125
  Testing perf lock record and perf lock contention
  [Fail] Recorded result count is not 1: 9
  test child finished with -1
  ---- end ----
  kernel lock contention analysis test: FAILED!

Fixes: ec685de25b6718f8 ("perf test: Add kernel lock contention test")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20221018094137.783081-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

led: qcom-lpg: Fix sleeping in atomic

[ Upstream commit 3031993b3474794ecb71b6f969a3e60e4bda9d8a ]

lpg_brighness_set() function can sleep, while led's brightness_set()
callback must be non-blocking. Change LPG driver to use
brightness_set_blocking() instead.

BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/0
preempt_count: 101, expected: 0
INFO: lockdep is turned off.
CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W          6.1.0-rc1-00014-gbe99b089c6fc-dirty #85
Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
Call trace:
 dump_backtrace.part.0+0xe4/0xf0
 show_stack+0x18/0x40
 dump_stack_lvl+0x88/0xb4
 dump_stack+0x18/0x34
 __might_resched+0x170/0x254
 __might_sleep+0x48/0x9c
 __mutex_lock+0x4c/0x400
 mutex_lock_nested+0x2c/0x40
 lpg_brightness_single_set+0x40/0x90
 led_set_brightness_nosleep+0x34/0x60
 led_heartbeat_function+0x80/0x170
 call_timer_fn+0xb8/0x340
 __run_timers.part.0+0x20c/0x254
 run_timer_softirq+0x3c/0x7c
 _stext+0x14c/0x578
 ____do_softirq+0x10/0x20
 call_on_irq_stack+0x2c/0x5c
 do_softirq_own_stack+0x1c/0x30
 __irq_exit_rcu+0x164/0x170
 irq_exit_rcu+0x10/0x40
 el1_interrupt+0x38/0x50
 el1h_64_irq_handler+0x18/0x2c
 el1h_64_irq+0x64/0x68
 cpuidle_enter_state+0xc8/0x380
 cpuidle_enter+0x38/0x50
 do_idle+0x244/0x2d0
 cpu_startup_entry+0x24/0x30
 rest_init+0x128/0x1a0
 arch_post_acpi_subsys_init+0x0/0x18
 start_kernel+0x6f4/0x734
 __primary_switched+0xbc/0xc4

Fixes: 24e2d05d1b68 ("leds: Add driver for Qualcomm LPG")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: uvesafb: Fixes an error handling path in uvesafb_probe()

[ Upstream commit a94371040712031ba129c7e9d8ff04a06a2f8207 ]

If an error occurs after a successful uvesafb_init_mtrr() call, it must be
undone by a corresponding arch_phys_wc_del() call, as already done in the
remove function.

This has been added in the remove function in commit 63e28a7a5ffc
("uvesafb: Clean up MTRR code")

Fixes: 8bdb3a2d7df4 ("uvesafb: the driver core")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: uvesafb: don't build on UML

[ Upstream commit 35b4f4d4a725cf8f8c10649163cd12aed509b953 ]

The uvesafb fbdev driver uses memory management information that is not
available on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

../drivers/video/fbdev/uvesafb.c: In function ‘uvesafb_vbe_init’:
../drivers/video/fbdev/uvesafb.c:807:21: error: ‘__supported_pte_mask’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {
../drivers/video/fbdev/uvesafb.c:807:44: error: ‘_PAGE_NX’ undeclared (first use in this function)
  807 |                 if (__supported_pte_mask & _PAGE_NX) {

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: geode: don't build on UML

[ Upstream commit 71c53e19226b0166ba387d3c590d0509f541a0a1 ]

The geode fbdev driver uses struct cpuinfo fields that are not present
on ARCH=um, so don't allow this driver to be built on UML.

Prevents these build errors:

In file included from ../arch/x86/include/asm/olpc.h:7:0,
                 from ../drivers/mfd/cs5535-mfd.c:17:
../arch/x86/include/asm/geode.h: In function ‘is_geode_gx’:
../arch/x86/include/asm/geode.h:16:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:16:39: error: ‘X86_VENDOR_NSC’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC) &&
../arch/x86/include/asm/geode.h:17:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:18:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 5));
../arch/x86/include/asm/geode.h: In function ‘is_geode_lx’:
../arch/x86/include/asm/geode.h:23:24: error: ‘struct cpuinfo_um’ has no member named ‘x86_vendor’
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:23:39: error: ‘X86_VENDOR_AMD’ undeclared (first use in this function); did you mean ‘X86_VENDOR_ANY’?
  return ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) &&
../arch/x86/include/asm/geode.h:24:17: error: ‘struct cpuinfo_um’ has no member named ‘x86’
   (boot_cpu_data.x86 == 5) &&
../arch/x86/include/asm/geode.h:25:17: error: ‘struct cpuinfo_um’ has no member named ‘x86_model’
   (boot_cpu_data.x86_model == 10));

Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: linux-um@lists.infradead.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: Andres Salomon <dilinger@queued.net>
Cc: linux-geode@lists.infradead.org
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: ep93xx-fb: Add missing clk_disable_unprepare in ep93xxfb_probe()

[ Upstream commit c84bf485a5aaf9aa0764a58832b7ef4375c29f03 ]

The clk_disable_unprepare() should be called in the error handling
of register_framebuffer(), fix it.

Fixes: 0937a7b3625d ("video: ep93xx: Prepare clock before using it")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: vermilion: decrease reference count in error path

[ Upstream commit 001f2cdb952a9566c77fb4b5470cc361db5601bb ]

pci_get_device() will increase the reference count for the returned
pci_dev. For the error path, we need to use pci_dev_put() to decrease
the reference count.

Fixes: dbe7e429fedb ("vmlfb: framebuffer driver for Intel Vermilion Range")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: via: Fix error in via_core_init()

[ Upstream commit 5886b130de953cfb8826f7771ec8640a79934a7f ]

via_core_init() won't exit the driver when pci_register_driver() failed.
Exit the viafb-i2c and the viafb-gpio in failed path to prevent error.

VIA Graphics Integration Chipset framebuffer 2.4 initializing
Error: Driver 'viafb-i2c' is already registered, aborting...
Error: Driver 'viafb-gpio' is already registered, aborting...

Fixes: 7582eb9be85f ("viafb: Turn GPIO and i2c into proper platform devices")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: pm2fb: fix missing pci_disable_device()

[ Upstream commit ed359a464846b48f76ea6cc5cd8257e545ac97f4 ]

Add missing pci_disable_device() in error path of probe() and remove() path.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: ssd1307fb: Drop optional dependency

[ Upstream commit 025e3b507a3a8e1ee96a3112bb67495c77d6cdb6 ]

Only a single out of three devices need a PWM, so from driver it's
optional. Moreover it's a single driver in the entire kernel that
currently selects PWM. Unfortunately this selection is a root cause
of the circular dependencies when we want to enable optional PWM
for some other drivers that select GPIOLIB.

Fixes: a2ed00da5047 ("drivers/video: add support for the Solomon SSD1307 OLED Controller")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/lmh: Fix irq handler return value

[ Upstream commit 46a891e45be97c6781ac34f5ec777d69370e252b ]

After enough invocations the LMh irq is eventually reported as bad, because the
handler doesn't return IRQ_HANDLED, fix this.

Fixes: 53bca371cdf7 ("thermal/drivers/qcom: Add support for LMh driver")
Reported-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220316180322.88132-1-bjorn.andersson@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/qcom/temp-alarm: Fix inaccurate warning for gen2

[ Upstream commit 8763f8acbf8aef22a2321d4c978cd078aa3b8f64 ]

On gen2 chips the stage2 threshold is not 140 degC but 125 degC.

Make the warning message clearer by using this variable and also by
including the temperature that was checked for.

Fixes: aa92b3310c55 ("thermal/drivers/qcom-spmi-temp-alarm: Add support for GEN2 rev 1 PMIC peripherals")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Amit Kucheria <amitk@kernel.org>
Link: https://lore.kernel.org/r/20221020145237.942146-1-luca.weiss@fairphone.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/of: Fix memory leak on thermal_of_zone_register() failure

[ Upstream commit 7ef2f023c2c77a452ba5d0c9b1ad04a5a895d553 ]

The function does not free 'of_ops' upon failure, leading to a memory
leak [1].

Fix by freeing 'of_ops' in the error path.

[1]
unreferenced object 0xffff8ee846198c80 (size 128):
  comm "swapper/0", pid 1, jiffies 4294699704 (age 70.076s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    d0 3f 6e 8c ff ff ff ff 00 00 00 00 00 00 00 00  .?n.............
  backtrace:
    [<00000000d136f562>] __kmalloc_node_track_caller+0x42/0x120
    [<0000000063f31678>] kmemdup+0x1d/0x40
    [<00000000e6d24096>] thermal_of_zone_register+0x49/0x520
    [<000000005e78c755>] devm_thermal_of_zone_register+0x54/0x90
    [<00000000ee6b209e>] pmbus_add_sensor+0x1b4/0x1d0
    [<00000000896105e3>] pmbus_add_sensor_attrs_one+0x123/0x440
    [<0000000049e990a6>] pmbus_add_sensor_attrs+0xfe/0x1d0
    [<00000000466b5440>] pmbus_do_probe+0x66b/0x14e0
    [<0000000084d42285>] i2c_device_probe+0x13b/0x2f0
    [<0000000029e2ae74>] really_probe+0xce/0x2c0
    [<00000000692df15c>] driver_probe_device+0x19/0xd0
    [<00000000547d9cce>] __device_attach_driver+0x6f/0x100
    [<0000000020abd24b>] bus_for_each_drv+0x76/0xc0
    [<00000000665d9563>] __device_attach+0xfc/0x180
    [<000000008ddd4d6a>] bus_probe_device+0x82/0xa0
    [<000000009e61132b>] device_add+0x3fe/0x920

Fixes: 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20221020103658.802457-1-idosch@nvidia.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/k3_j72xx_bandgap: Fix the debug print message

[ Upstream commit a7c42af78b19a11e98a5555a664c343e3a672632 ]

The debug print message to check the workaround applicability is inverted.
Fix the same.

Fixes: ffcb2fc86eb7 ("thermal: k3_j72xx_bandgap: Add the bandgap driver support")
Reported-by: Bryan Brattlof <bb@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Link: https://lore.kernel.org/r/20221010034126.3550-1-j-keerthy@ti.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/drivers/imx8mm_thermal: Validate temperature range

[ Upstream commit d37edc7370273306d8747097fafa62436c1cfe16 ]

Check against the upper temperature limit (125 degrees C) before
consider the temperature valid.

Fixes: 5eed800a6811 ("thermal: imx8mm: Add support for i.MX8MM thermal monitoring unit")
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Jacky Bai <ping.bai@nxp.com>
Link: https://lore.kernel.org/r/20221014073507.1594844-1-marcus.folkesson@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

samples: vfio-mdev: Fix missing pci_disable_device() in mdpy_fb_probe()

[ Upstream commit d1f0f50fbbbbca1e3e8157e51934613bf88f6d44 ]

Add missing pci_disable_device() in fail path of mdpy_fb_probe().
Besides, fix missing release functions in mdpy_fb_remove().

Fixes: cacade1946a4 ("sample: vfio mdev display - guest driver")
Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com>
Link: https://lore.kernel.org/r/20221208013341.3999-1-shangxiaojing@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ksmbd: Fix resource leak in ksmbd_session_rpc_open()

[ Upstream commit bc044414fa0326a4e5c3c509c00b1fcaf621b5f4 ]

When ksmbd_rpc_open() fails then it must call ksmbd_rpc_id_free() to
undo the result of ksmbd_ipc_id_alloc().

Fixes: e2f34481b24d ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/hist: Fix issue of losting command info in error_log

[ Upstream commit 608c6ed3337850c767ab0dd6c583477922233e29 ]

When input some constructed invalid 'trigger' command, command info
in 'error_log' are lost [1].

The root cause is that there is a path that event_hist_trigger_parse()
is recursely called once and 'last_cmd' which save origin command is
cleared, then later calling of hist_err() will no longer record origin
command info:

  event_hist_trigger_parse() {
    last_cmd_set()  // <1> 'last_cmd' save origin command here at first
    create_actions() {
      onmatch_create() {
        action_create() {
          trace_action_create() {
            trace_action_create_field_var() {
              create_field_var_hist() {
                event_hist_trigger_parse() {  // <2> recursely called once
                  hist_err_clear()  // <3> 'last_cmd' is cleared here
                }
                hist_err()  // <4> No longer find origin command!!!

Since 'glob' is empty string while running into the recurse call, we
can trickly check it and bypass the call of hist_err_clear() to solve it.

[1]
 # cd /sys/kernel/tracing
 # echo "my_synth_event int v1; int v2; int v3;" >> synthetic_events
 # echo 'hist:keys=pid' >> events/sched/sched_waking/trigger
 # echo "hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(\
pid,pid1)" >> events/sched/sched_switch/trigger
 # cat error_log
[  8.405018] hist:sched:sched_switch: error: Couldn't find synthetic event
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                                                          ^
[  8.816902] hist:sched:sched_switch: error: Couldn't find field
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                          ^
[  8.816902] hist:sched:sched_switch: error: Couldn't parse field variable
  Command:
hist:keys=next_pid:onmatch(sched.sched_waking).my_synth_event(pid,pid1)
                          ^
[  8.999880] : error: Couldn't find field
  Command:
           ^
[  8.999880] : error: Couldn't parse field variable
  Command:
           ^
[  8.999880] : error: Couldn't find field
  Command:
           ^
[  8.999880] : error: Couldn't create histogram for field
  Command:
           ^

Link: https://lore.kernel.org/linux-trace-kernel/20221207135326.3483216-1-zhengyejian1@huawei.com
Cc: <mhiramat@kernel.org>
Cc: <zanussi@kernel.org>
Fixes: f404da6e1d46 ("tracing: Add 'last error' error facility for hist triggers")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: typec: wusb3801: fix fwnode refcount leak in wusb3801_probe()

[ Upstream commit dc18a4c7b3bd447cef2395deeb1f6ac16dfaca0e ]

I got the following report while doing fault injection test:

  OF: ERROR: memory leak, expected refcount 1 instead of 4,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/tcpc@60/connector

If wusb3801_hw_init() fails, fwnode_handle_put() needs be called to
avoid refcount leak.

Fixes: d016cbe4d7ac ("usb: typec: Support the WUSB3801 port controller")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221203071027.3808308-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: storage: Add check for kcalloc

[ Upstream commit c35ca10f53c51eeb610d3f8fbc6dd6d511b58a58 ]

As kcalloc may return NULL pointer, the return value should
be checked and return error if fails as same as the ones in
alauda_read_map.

Fixes: e80b0fade09e ("[PATCH] USB Storage: add alauda support")
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221208110058.12983-1-jiasheng@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: ismt: Fix an out-of-bounds bug in ismt_access()

[ Upstream commit 39244cc754829bf707dccd12e2ce37510f5b1f8d ]

When the driver does not check the data from the user, the variable
'data->block[0]' may be very large to cause an out-of-bounds bug.

The following log can reveal it:

[   33.995542] i2c i2c-1: ioctl, cmd=0x720, arg=0x7ffcb3dc3a20
[   33.995978] ismt_smbus 0000:00:05.0: I2C_SMBUS_BLOCK_DATA:  WRITE
[   33.996475] ==================================================================
[   33.996995] BUG: KASAN: out-of-bounds in ismt_access.cold+0x374/0x214b
[   33.997473] Read of size 18446744073709551615 at addr ffff88810efcfdb1 by task ismt_poc/485
[   33.999450] Call Trace:
[   34.001849]  memcpy+0x20/0x60
[   34.002077]  ismt_access.cold+0x374/0x214b
[   34.003382]  __i2c_smbus_xfer+0x44f/0xfb0
[   34.004007]  i2c_smbus_xfer+0x10a/0x390
[   34.004291]  i2cdev_ioctl_smbus+0x2c8/0x710
[   34.005196]  i2cdev_ioctl+0x5ec/0x74c

Fix this bug by checking the size of 'data->block[0]' first.

Fixes: 13f35ac14cd0 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller")
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: mux: reg: check return value after calling platform_get_resource()

[ Upstream commit 2d47b79d2bd39cc6369eccf94a06568d84c906ae ]

It will cause null-ptr-deref in resource_size(), if platform_get_resource()
returns NULL, move calling resource_size() after devm_ioremap_resource() that
will check 'res' to avoid null-ptr-deref.
And use devm_platform_get_and_ioremap_resource() to simplify code.

Fixes: b3fdd32799d8 ("i2c: mux: Add register-based mux i2c-mux-reg")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: protect the GPIO device against being dropped while in use by user-space

[ Upstream commit bdbbae241a04f387ba910b8609f95fad5f1470c7 ]

While any of the GPIO cdev syscalls is in progress, the kernel can call
gpiochip_remove() (for instance, when a USB GPIO expander is disconnected)
which will set gdev->chip to NULL after which any subsequent access will
cause a crash.

To avoid that: use an RW-semaphore in which the syscalls take it for
reading (so that we don't needlessly prohibit the user-space from calling
syscalls simultaneously) while gpiochip_remove() takes it for writing so
that it can only happen once all syscalls return.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
[Nick: fixed a build failure with CDEV_V1 disabled]
Co-authored-by: Nick Hainke <vincent@systemli.org>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpiolib: cdev: fix NULL-pointer dereferences

[ Upstream commit 533aae7c94dbc2b14301cfd68ae7e0e90f0c8438 ]

There are several places where we can crash the kernel by requesting
lines, unbinding the GPIO device, then calling any of the system calls
relevant to the GPIO character device's annonymous file descriptors:
ioctl(), read(), poll().

While I observed it with the GPIO simulator, it will also happen for any
of the GPIO devices that can be hot-unplugged - for instance any HID GPIO
expander (e.g. CP2112).

This affects both v1 and v2 uAPI.

This fixes it partially by checking if gdev->chip is not NULL but it
doesn't entirely remedy the situation as we still have a race condition
in which another thread can remove the device after the check.

Fixes: d7c51b47ac11 ("gpio: userspace ABI for reading/writing GPIO lines")
Fixes: 3c0d9c635ae2 ("gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL")
Fixes: aad955842d1c ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Fixes: a54756cb24ea ("gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL")
Fixes: 7b8e00d98168 ("gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vme: Fix error not catched in fake_init()

[ Upstream commit 7bef797d707f1744f71156b21d41e3b8c946631f ]

In fake_init(), __root_device_register() is possible to fail but it's
ignored, which can cause unregistering vme_root fail when exit.

 general protection fault,
 probably for non-canonical address 0xdffffc000000008c
 KASAN: null-ptr-deref in range [0x0000000000000460-0x0000000000000467]
 RIP: 0010:root_device_unregister+0x26/0x60
 Call Trace:
  <TASK>
  __x64_sys_delete_module+0x34f/0x540
  do_syscall_64+0x38/0x90
  entry_SYSCALL_64_after_hwframe+0x63/0xcd

Return error when __root_device_register() fails.

Fixes: 658bcdae9c67 ("vme: Adding Fake VME driver")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221205084805.147436-1-chenzhongjin@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192e: Fix potential use-after-free in rtllib_rx_Monitor()

[ Upstream commit d30f4436f364b4ad915ca2c09be07cd0f93ceb44 ]

The skb is delivered to netif_rx() in rtllib_monitor_rx(), which may free it,
after calling this, dereferencing skb may trigger use-after-free.
Found by Smatch.

Fixes: 94a799425eee ("From: wlanfae <wlanfae@realtek.com> [PATCH 1/8] rtl8192e: Import new version of driver from realtek")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221123081253.22296-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: rtl8192u: Fix use after free in ieee80211_rx()

[ Upstream commit bcc5e2dcf09089b337b76fc1a589f6ff95ca19ac ]

We cannot dereference the "skb" pointer after calling
ieee80211_monitor_rx(), because it is a use after free.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y33BArx3k/aw6yv/@kili
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: pxa-pci: fix missing pci_disable_device() on error in ce4100_i2c_probe

[ Upstream commit d78a167332e1ca8113268ed922c1212fd71b73ad ]

Using pcim_enable_device() to avoid missing pci_disable_device().

Fixes: 7e94dd154e93 ("i2c-pxa2xx: Add PCI support for PXA I2C controller")
Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

vfio/iova_bitmap: refactor iova_bitmap_set() to better handle page boundaries

[ Upstream commit b058ea3ab5afea873ab8d976277539ca9e43869a ]

Commit f38044e5ef58 ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
had fixed the unaligned bitmaps by capping the remaining iterable set at
the start of the bitmap. Although, that mistakenly worked around
iova_bitmap_set() incorrectly setting bits across page boundary.

Fix this by reworking the loop inside iova_bitmap_set() to iterate over a
range of bits to set (cur_bit .. last_bit) which may span different pinned
pages, thus updating @page_idx and @offset as it sets the bits. The
previous cap to the first page is now adjusted to be always accounted
rather than when there's only a non-zero pgoff.

While at it, make @page_idx , @offset and @nbits to be unsigned int given
that it won't be more than 512 and 4096 respectively (even a bigger
PAGE_SIZE or a smaller struct page size won't make this bigger than the
above 32-bit max). Also, delete the stale kdoc on Return type.

Cc: Avihai Horon <avihaih@nvidia.com>
Fixes: f38044e5ef58 ("vfio/iova_bitmap: Fix PAGE_SIZE unaligned bitmaps")
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Avihai Horon <avihaih@nvidia.com>
Link: https://lore.kernel.org/r/20221129131235.38880-1-joao.m.martins@oracle.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

chardev: fix error handling in cdev_device_add()

[ Upstream commit 11fa7fefe3d8fac7da56bc9aa3dd5fb3081ca797 ]

While doing fault injection test, I got the following report:

------------[ cut here ]------------
kobject: '(null)' (0000000039956980): is not initialized, yet kobject_put() is being called.
WARNING: CPU: 3 PID: 6306 at kobject_put+0x23d/0x4e0
CPU: 3 PID: 6306 Comm: 283 Tainted: G        W          6.1.0-rc2-00005-g307c1086d7c9 #1253
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:kobject_put+0x23d/0x4e0
Call Trace:
 <TASK>
 cdev_device_add+0x15e/0x1b0
 __iio_device_register+0x13b4/0x1af0 [industrialio]
 __devm_iio_device_register+0x22/0x90 [industrialio]
 max517_probe+0x3d8/0x6b4 [max517]
 i2c_device_probe+0xa81/0xc00

When device_add() is injected fault and returns error, if dev->devt is not set,
cdev_add() is not called, cdev_del() is not needed. Fix this by checking dev->devt
in error path.

Fixes: 233ed09d7fda ("chardev: add helper function to register char devs with a struct device")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221202030237.520280-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mcb: mcb-parse: fix error handing in chameleon_parse_gdd()

[ Upstream commit 728ac3389296caf68638628c987aeae6c8851e2d ]

If mcb_device_register() returns error in chameleon_parse_gdd(), the refcount
of bus and device name are leaked. Fix this by calling put_device() to give up
the reference, so they can be released in mcb_release_dev() and kobject_cleanup().

Fixes: 3764e82e5150 ("drivers: Introduce MEN Chameleon Bus")
Reviewed-by: Johannes Thumshirn <jth@kernel.org>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/ebfb06e39b19272f0197fa9136b5e4b6f34ad732.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drivers: mcb: fix resource leak in mcb_probe()

[ Upstream commit d7237462561fcd224fa687c56ccb68629f50fc0d ]

When probe hook function failed in mcb_probe(), it doesn't put the device.
Compiled test only.

Fixes: 7bc364097a89 ("mcb: Acquire reference to device in probe")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Signed-off-by: Johannes Thumshirn <jth@kernel.org>
Link: https://lore.kernel.org/r/9f87de36bfb85158b506cb78c6fc9db3f6a3bad1.1669624063.git.johannes.thumshirn@wdc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_hid: fix refcount leak on error path

[ Upstream commit 70a3288a7586526315105c699b687d78cd32559a ]

When failing to allocate report_desc, opts->refcnt has already been
incremented so it needs to be decremented to avoid leaving the options
structure permanently locked.

Fixes: 21a9476a7ba8 ("usb: gadget: hid: add configfs support")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-3-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: f_hid: fix f_hidg lifetime vs cdev

[ Upstream commit 89ff3dfac604614287ad5aad9370c3f984ea3f4b ]

The embedded struct cdev does not have its lifetime correctly tied to
the enclosing struct f_hidg, so there is a use-after-free if /dev/hidgN
is held open while the gadget is deleted.

This can readily be replicated with libusbgx's example programs (for
conciseness - operating directly via configfs is equivalent):

gadget-hid
exec 3<> /dev/hidg0
gadget-vid-pid-remove
exec 3<&-

Pull the existing device up in to struct f_hidg and make use of the
cdev_device_{add,del}() helpers.  This changes the lifetime of the
device object to match struct f_hidg, but note that it is still added
and deleted at the same time.

Fixes: 71adf1189469 ("USB: gadget: add HID gadget driver")
Tested-by: Lee Jones <lee@kernel.org>
Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: John Keeping <john@metanate.com>
Link: https://lore.kernel.org/r/20221122123523.3068034-2-john@metanate.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: core: hcd: Fix return value check in usb_hcd_setup_local_mem()

[ Upstream commit 3c347cdafa3db43337870006e5c2d7b78a8dae20 ]

If dmam_alloc_attrs() fails, it returns NULL pointer and never
return ERR_PTR(), so repleace IS_ERR() with IS_ERR_OR_NULL()
and if it's NULL, returns -ENOMEM.

Fixes: 9ba26f5cecd8 ("ARM: sa1100/assabet: move dmabounce hack to ohci driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221125064120.2842452-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: roles: fix of node refcount leak in usb_role_switch_is_parent()

[ Upstream commit 1ab30c610630da5391a373cddb8a065bf4c4bc01 ]

I got the following report while doing device(mt6370-tcpc) load
test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:

  OF: ERROR: memory leak, expected refcount 1 instead of 2,
  of_node_get()/of_node_put() unbalanced - destroy cset entry:
  attach overlay node /i2c/pmic@34

The 'parent' returned by fwnode_get_parent() with refcount incremented.
it needs be put after using.

Fixes: 6fadd72943b8 ("usb: roles: get usb-role-switch from parent")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221122111226.251588-1-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tracing/user_events: Fix call print_fmt leak

[ Upstream commit 4bded7af8b9af6e97514b0521004f90267905aef ]

If user_event_trace_register() fails within user_event_parse() the
call's print_fmt member is not freed. Add kfree call to fix this.

Link: https://lkml.kernel.org/r/20221123183248.554-1-beaub@linux.microsoft.com
Fixes: aa3b2b4c6692 ("user_events: Add print_fmt generation support for basic types")
Signed-off-by: Beau Belgrave <beaub@linux.microsoft.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: cti: Fix null pointer error on CTI init before ETM

[ Upstream commit 3dc228b35387803d9c43ed1b098aabb1d3ae9c7d ]

When CTI is discovered first then the function
coresight_set_assoc_ectdev_mutex() is called to set the association
between CTI and ETM device. Recent lockdep fix passes a null pointer.

This patch passes the correct pointer.

Before patch: log of boot oops sequence with CTI discovered first:

[   12.424091]  cs_system_cfg: CoreSight Configuration manager initialised
[   12.483474] coresight cti_sys0: CTI initialized
[   12.488109] coresight cti_sys1: CTI initialized
[   12.503594] coresight cti_cpu0: CTI initialized
[   12.517877] coresight-cpu-debug 850000.debug: Coresight debug-CPU0 initialized
[   12.523479] coresight-cpu-debug 852000.debug: Coresight debug-CPU1 initialized
[   12.529926] coresight-cpu-debug 854000.debug: Coresight debug-CPU2 initialized
[   12.541808] coresight stm0: STM32 initialized
[   12.544421] coresight-cpu-debug 856000.debug: Coresight debug-CPU3 initialized
[   12.585639] coresight cti_cpu1: CTI initialized
[   12.614028] coresight cti_cpu2: CTI initialized
[   12.631679] CSCFG registered etm0
[   12.633920] coresight etm0: CPU0: etm v4.0 initialized
[   12.656392] coresight cti_cpu3: CTI initialized

...

[   12.708383] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000348

...

[   12.755094] Internal error: Oops: 0000000096000044 [#1] SMP
[   12.761817] Modules linked in: coresight_etm4x(+) coresight_tmc coresight_cpu_debug coresight_replicator coresight_funnel coresight_cti coresight_tpiu coresight_stm coresight
[   12.767210] CPU: 3 PID: 1346 Comm: systemd-udevd Not tainted 6.1.0-rc3tid-v6tid-v6-235166-gf7f7d7a2204a-dirty #498
[   12.782827] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT)
[   12.793154] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   12.800010] pc : coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]
[   12.806694] lr : coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]

...

[   12.885064] Call trace:
[   12.892352]  coresight_set_assoc_ectdev_mutex+0x30/0x50 [coresight]
[   12.894693]  cti_add_assoc_to_csdev+0x144/0x1b0 [coresight_cti]
[   12.900943]  coresight_register+0x2c8/0x320 [coresight]
[   12.906844]  etm4_add_coresight_dev.isra.27+0x148/0x280 [coresight_etm4x]
[   12.912056]  etm4_probe+0x144/0x1c0 [coresight_etm4x]
[   12.918998]  etm4_probe_amba+0x40/0x78 [coresight_etm4x]
[   12.924032]  amba_probe+0x11c/0x1f0

After patch: similar log

[   12.444467]  cs_system_cfg: CoreSight Configuration manager initialised
[   12.456329] coresight-cpu-debug 850000.debug: Coresight debug-CPU0 initialized
[   12.456754] coresight-cpu-debug 852000.debug: Coresight debug-CPU1 initialized
[   12.469672] coresight-cpu-debug 854000.debug: Coresight debug-CPU2 initialized
[   12.476098] coresight-cpu-debug 856000.debug: Coresight debug-CPU3 initialized
[   12.532409] coresight stm0: STM32 initialized
[   12.533708] coresight cti_sys0: CTI initialized
[   12.539478] coresight cti_sys1: CTI initialized
[   12.550106] coresight cti_cpu0: CTI initialized
[   12.633931] coresight cti_cpu1: CTI initialized
[   12.634664] coresight cti_cpu2: CTI initialized
[   12.638090] coresight cti_cpu3: CTI initialized
[   12.721136] CSCFG registered etm0

...

[   12.762643] CSCFG registered etm1
[   12.762666] coresight etm1: CPU1: etm v4.0 initialized
[   12.776258] CSCFG registered etm2
[   12.776282] coresight etm2: CPU2: etm v4.0 initialized
[   12.784357] CSCFG registered etm3
[   12.785455] coresight etm3: CPU3: etm v4.0 initialized

Error can also be triggered by manually starting the modules using modprobe
in the following order:

root@linaro-developer:/home/linaro/cs-mods# modprobe coresight
root@linaro-developer:/home/linaro/cs-mods# modprobe coresight-cti
root@linaro-developer:/home/linaro/cs-mods# modprobe coresight-etm4x

Tested on Dragonboard DB410c
Applies to coresight/next

Fixes: 23722fb46725 ("coresight: Fix possible deadlock with lock dependency")
Signed-off-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221123193818.6253-1-mike.leach@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

coresight: trbe: remove cpuhp instance node before remove cpuhp state

[ Upstream commit 20ee8c223f792947378196307d8e707c9cdc2d61 ]

cpuhp_state_add_instance() and cpuhp_state_remove_instance() should
be used in pairs. Or there will lead to the warn on
cpuhp_remove_multi_state() since the cpuhp_step list is not empty.

The following is the error log with 'rmmod coresight-trbe':
Error: Removing state 215 which has instances left.
Call trace:
  __cpuhp_remove_state_cpuslocked+0x144/0x160
  __cpuhp_remove_state+0xac/0x100
  arm_trbe_device_remove+0x2c/0x60 [coresight_trbe]
  platform_remove+0x34/0x70
  device_remove+0x54/0x90
  device_release_driver_internal+0x1e4/0x250
  driver_detach+0x5c/0xb0
  bus_remove_driver+0x64/0xc0
  driver_unregister+0x3c/0x70
  platform_driver_unregister+0x20/0x30
  arm_trbe_exit+0x1c/0x658 [coresight_trbe]
  __arm64_sys_delete_module+0x1ac/0x24c
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0x58/0x1a0
  do_el0_svc+0x38/0xd0
  el0_svc+0x2c/0xc0
  el0t_64_sync_handler+0x1ac/0x1b0
  el0t_64_sync+0x19c/0x1a0
 ---[ end trace 0000000000000000 ]---

Fixes: 3fbf7f011f24 ("coresight: sink: Add TRBE driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Yang Shen <shenyang39@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20221122090355.23533-1-shenyang39@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

counter: stm32-lptimer-cnt: fix the check on arr and cmp registers update

[ Upstream commit fd5ac974fc25feed084c2d1599d0dddb4e0556bc ]

The ARR (auto reload register) and CMP (compare) registers are
successively written. The status bits to check the update of these
registers are polled together with regmap_read_poll_timeout().
The condition to end the loop may become true, even if one of the register
isn't correctly updated.
So ensure both status bits are set before clearing them.

Fixes: d8958824cf07 ("iio: counter: Add support for STM32 LPTimer")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20221123133609.465614-1-fabrice.gasnier@foss.st.com/
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: adis: add '__adis_enable_irq()' implementation

[ Upstream commit 99c05e4283a19a02a256f14100ca4ec3b2da3f62 ]

Add '__adis_enable_irq()' implementation which is the unlocked
version of 'adis_enable_irq()'.
Call '__adis_enable_irq()' instead of 'adis_enable_irq()' from
'__adis_intial_startup()' to keep the expected unlocked functionality.

This fix is needed to remove a deadlock for all devices which are
using 'adis_initial_startup()'. The deadlock occurs because the
same mutex is acquired twice, without releasing it.
The mutex is acquired once inside 'adis_initial_startup()', before
calling '__adis_initial_startup()', and once inside
'adis_enable_irq()', which is called by '__adis_initial_startup()'.
The deadlock is removed by calling '__adis_enable_irq()', instead of
'adis_enable_irq()' from within '__adis_initial_startup()'.

Fixes: b600bd7eb3335 ("iio: adis: do not disabe IRQs in 'adis_init()'")
Signed-off-by: Ramona Bolboaca <ramona.bolboaca@analog.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20221122082757.449452-2-ramona.bolboaca@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: temperature: ltc2983: make bulk write buffer DMA-safe

[ Upstream commit 5e0176213949724fbe9a8e4a39817edce337b8a0 ]

regmap_bulk_write() does not guarantee implicit DMA-safety,
even though the current implementation duplicates the given
buffer. Do not rely on it.

Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983")
Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Link: https://lore.kernel.org/r/20221103130041.2153295-2-demonsingur@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

cxl: fix possible null-ptr-deref in cxl_pci_init_afu|adapter()

[ Upstream commit 02cd3032b154fa02fdf90e7467abaeed889330b2 ]

If device_register() fails in cxl_pci_afu|adapter(), the device
is not added, device_unregister() can not be called in the error
path, otherwise it will cause a null-ptr-deref because of removing
not added device.

As comment of device_register() says, it should use put_device() to give
up the reference in the error path. So split device_unregister() into
device_del() and put_device(), then goes to put dev when register fails.

Fixes: f204e0b8cedd ("cxl: Driver code for powernv PCIe based cards for userspace access")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Andrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20221111145440.2426970-2-yangyingliang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>