Kyungmin Park [Thu, 18 Feb 2010 07:50:51 +0000 (16:50 +0900)]
s5pc110: copy&paste S3C UDC OTG driver from Linux Kernel tree
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 07:49:57 +0000 (16:49 +0900)]
Enable the use of Ethernet over USB (CDC) for the AT91SAM9261EK board.
Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 07:49:05 +0000 (16:49 +0900)]
Connect the AT91 UDC to USB CDC-ethernet support
This patch implements the low-level part of the USB CDC layer for AT91
Other boards can use this patch as an example to connect their own.
It does not enable the use of CDC ethernet for any of the AT91 boards.
Separate patches are required for that. Some boards also use network-
drivers that do not support CONFIG_NET_MULTI, which is mandatory for this
patch to work.
Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 07:33:31 +0000 (16:33 +0900)]
Integrate USB gadget layer and USB CDC driver layer
Signed-off-by: Thomas Smits <ts.smits@gmail.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 07:31:15 +0000 (16:31 +0900)]
USB: Prepare the TFTP over USB
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 02:41:48 +0000 (11:41 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Thu, 18 Feb 2010 02:41:43 +0000 (11:41 +0900)]
s5pc110: neptune: Neptune board detect support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Thu, 18 Feb 2010 02:32:02 +0000 (11:32 +0900)]
s5pc1xx: gpio: use upper case macro
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Thu, 18 Feb 2010 02:02:21 +0000 (11:02 +0900)]
Merge branch 'master' of http://git.denx.de/u-boot
Conflicts:
cpu/arm_cortexa8/s5pc1xx/Makefile
cpu/arm_cortexa8/s5pc1xx/cache.c
lib_ppc/reloc.S
onenand_ipl/board/samsung/universal/u-boot-onenand.lds
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
jinmo.sung [Tue, 16 Feb 2010 12:05:13 +0000 (21:05 +0900)]
s5pc110: p1: modify onenand write address
Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>
MyungJoo Ham [Thu, 11 Feb 2010 12:51:39 +0000 (21:51 +0900)]
s5pc110: kessler: fixed omitted conditions (LCD/MAX17040 for rev 0.9)
Kyungmin Park [Thu, 11 Feb 2010 11:25:22 +0000 (20:25 +0900)]
s5pc110: kessler: code cleanup
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 11 Feb 2010 11:16:55 +0000 (20:16 +0900)]
s5pc110: kessler: Use the kessler name instead of aries
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Thu, 11 Feb 2010 10:44:36 +0000 (19:44 +0900)]
s5pc110: aquila: Use correct aquila machine id
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
ChanWoo Choi [Thu, 11 Feb 2010 07:54:45 +0000 (16:54 +0900)]
s5pc110: bt: Restore control method of gpio related to BT when resume/suspend
Minkyu Kang [Thu, 11 Feb 2010 06:36:09 +0000 (15:36 +0900)]
s5pc110: aquila: adjust mtd partition
0: bootloader 0x00040000 0x00000000 0
1: params 0x00040000 0x00040000 0
2: config 0x00380000 0x00080000 0
3: csa 0x00800000 0x00400000 0
4: kernel 0x00700000 0x00c00000 0
5: log 0x00100000 0x01300000 0
6: modem 0x00c00000 0x01400000 0
7: qboot 0x02000000 0x02000000 0
8: UBI 0x1c000000 0x04000000 0
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
MyungJoo Ham [Thu, 11 Feb 2010 02:15:07 +0000 (11:15 +0900)]
s5pc110: rtc.h omitted endif
MyungJoo Ham [Thu, 11 Feb 2010 02:10:21 +0000 (11:10 +0900)]
s5pc110: rtc registers structured.
MyungJoo Ham [Thu, 11 Feb 2010 01:44:10 +0000 (10:44 +0900)]
s5pc110: RTC registers added (will be used for charger)
Minkyu Kang [Thu, 11 Feb 2010 00:55:53 +0000 (09:55 +0900)]
s5pc110: aquila: fix mtd partition and remove csa migration
#: name size offset mask_flags
0: bootloader 0x00040000 0x00000000 0
1: params 0x00040000 0x00040000 0
2: config 0x00380000 0x00080000 0
3: csa 0x00800000 0x00400000 0
4: kernel 0x00600000 0x00c00000 0
5: log 0x00100000 0x01200000 0
6: modem 0x00c00000 0x01300000 0
7: qboot 0x01e00000 0x01f00000 0
8: UBI 0x1c300000 0x03d00000 0
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 10 Feb 2010 09:48:59 +0000 (18:48 +0900)]
s5pc110: sleep: remove warning
sleep.c: In function 's5pc110_sleep':
sleep.c:353: warning: implicit declaration of function 'board_sleep_init_late'
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 10 Feb 2010 05:28:50 +0000 (14:28 +0900)]
s5pc110: p1p2: fix onenand_ipl build for EVT1
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
MyungJoo Ham [Wed, 10 Feb 2010 02:48:15 +0000 (11:48 +0900)]
charger: wakeup and start booting if TA is out while charging/sleeping.
Minkyu Kang [Wed, 10 Feb 2010 02:36:45 +0000 (11:36 +0900)]
s5pc110: usbd: remove warnings
usb_downloader.c: In function 'usb_stop':
usb_downloader.c:113: warning: implicit declaration of function 's5pc_fimd_lcd_off'
usb_downloader.c:114: warning: implicit declaration of function 's5pc_fimd_window_off'
usb_downloader.c: At top level:
usb_downloader.c:58: warning: 's5p_usb_clear_upfile_info' defined but not used
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Wed, 10 Feb 2010 02:27:43 +0000 (11:27 +0900)]
video: remove warning
font_8x16.c:4629: warning: pointer targets in initialization differ in signedness
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
jinmo.sung [Tue, 9 Feb 2010 12:36:23 +0000 (21:36 +0900)]
s5pc110: p1: change ubi.mtd
Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>
jinmo.sung [Tue, 9 Feb 2010 12:21:13 +0000 (21:21 +0900)]
s5pc110: p1: divide cpu revision between evt0 and evt1.
Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>
jinmo.sung [Tue, 9 Feb 2010 12:19:01 +0000 (21:19 +0900)]
s5pc110: p1: change mtd partition.
Signed-off-by: jinmo.sung <jm0302.sung@samsung.com>
Joonyoung Shim [Tue, 9 Feb 2010 05:42:44 +0000 (14:42 +0900)]
s5pc110: gpio pdn setting: remove keep_state for CODEC/FM
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Tue, 9 Feb 2010 05:09:22 +0000 (14:09 +0900)]
s5pc110: Fix typo
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
MyungJoo Ham [Tue, 9 Feb 2010 04:42:58 +0000 (13:42 +0900)]
s5pc110: gpio pdn setting: turn on/off keep_state.
Donghwa Lee [Tue, 9 Feb 2010 03:12:24 +0000 (12:12 +0900)]
s5pc110: neptune: code clean unused bit for MADCTL
Donghwa Lee [Tue, 9 Feb 2010 03:07:46 +0000 (12:07 +0900)]
s5pc110: neptune: Correct RGB/BGR order
Kyungmin Park [Tue, 9 Feb 2010 01:38:10 +0000 (10:38 +0900)]
s5pc110: Remove unused functions and use the common header file
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Wolfgang Denk [Mon, 8 Feb 2010 21:09:24 +0000 (22:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Mike Frysinger [Mon, 8 Feb 2010 20:30:16 +0000 (15:30 -0500)]
kgdb: cpu/mpc* cpu/74xx: include kgdb.h when needed
Commit
cbb0cab1d929839d broke some platforms which used kgdb code but
didn't actually include kgdb.h. So include kgdb.h in all the relevant
traps code.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sang-youl Ha [Mon, 8 Feb 2010 18:05:21 +0000 (03:05 +0900)]
s5pc110: p1: home key usb download available
Signed-off-by: Sang-youl Ha <sy1004.ha@samsung.com>
Kyungmin Park [Mon, 8 Feb 2010 11:55:50 +0000 (20:55 +0900)]
s5pc110: aquila: Can modify console for wmg160
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
daeinki [Mon, 8 Feb 2010 11:25:08 +0000 (20:25 +0900)]
s5pc110: fb: changed lcd info name.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Mon, 8 Feb 2010 10:24:28 +0000 (19:24 +0900)]
s5pc110: fb: code clean.
Signed-off-by: daeinki <inki.dae@samsung.com>
daeinki [Mon, 8 Feb 2010 08:01:24 +0000 (17:01 +0900)]
s5pc110: lcd: reversed lcd panel for Cypress and bug fix.
Signed-off-by: daeinki <inki.dae@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 06:06:07 +0000 (15:06 +0900)]
s5pc110: aquila: fix wrong commit
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 05:47:05 +0000 (14:47 +0900)]
s5pc110: aquila: increase the log partition
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
daeinki [Mon, 8 Feb 2010 05:48:49 +0000 (14:48 +0900)]
s5pc110: fb: changed fimd clock to sclk_fimd.
Signed-off-by: daeinki <inki.dae@samsung.com>
Jeong-Seok Yang [Mon, 8 Feb 2010 03:56:10 +0000 (12:56 +0900)]
s5pc110: p1p2: No LCD support & No MMC support
Signed-off-by: Jeong-Seok Yang <jseok.yang@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 03:08:44 +0000 (12:08 +0900)]
s5pc110: clock: move PLL defines
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 02:08:52 +0000 (11:08 +0900)]
s5pc110: universal: add factory off usb to auto download mode
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 01:12:06 +0000 (10:12 +0900)]
s5pc110: universal: fix typo
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Minkyu Kang [Mon, 8 Feb 2010 01:11:15 +0000 (10:11 +0900)]
s5pc110: don't use fb functions when lcd is not supported
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Mon, 8 Feb 2010 01:02:13 +0000 (10:02 +0900)]
s5pc110: aquila: Fix compiler warning since typo
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Stefan Roese [Tue, 2 Feb 2010 12:43:48 +0000 (13:43 +0100)]
net: Use 0.5 sec timeout in miiphy_reset() instead of counting loop
This patch fixes a problem I've notived on a buggy PPC4xx system. This
system has problems with the PHY MDIO communication and seemed to be
stuck/crashed in miiphy_reset(). But degugging revealed, that the CPU
didn't crash, but "only" hung in this counting loop for about 2 minutes.
This patch now uses a real timeout of 0.5 seconds (as mentioned in the
comment in miiphy_reset).
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Stefano Babic [Mon, 1 Feb 2010 13:51:30 +0000 (14:51 +0100)]
fec_mxc: add support for MX51 processor
The patch add support for the Freescale mx51 processor
to the FEC ethernet driver.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Siddarth Gore [Tue, 19 Jan 2010 05:39:07 +0000 (11:09 +0530)]
NET: kirkwood-egiga smi access fix
Although the datasheet mentions seperate smi registers for each
port, using Port 1 smi register to access ethernet phys does not
work. Hence only Port 0 smi register should be used to access all
devices connected to the smi bus. This behavior is consistant with
the mv643xx driver in the linux kernel.
Signed-off-by: Siddarth Gore <gores@marvell.com>
Acked-by: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Joonyoung Shim [Sat, 6 Feb 2010 03:19:18 +0000 (12:19 +0900)]
Revert "s5pc110: wmg160: Workaround comments because of wrong board detection"
This reverts commit
643344ab72cadd769be981653672cc1e21fd5e61.
Joonyoung Shim [Sat, 6 Feb 2010 03:15:27 +0000 (12:15 +0900)]
s5pc110: Fix keypad codes
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Sat, 6 Feb 2010 01:20:22 +0000 (10:20 +0900)]
s5pc110: wmg160: Workaround comments because of wrong board detection
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Kyungmin Park [Sat, 6 Feb 2010 01:04:23 +0000 (10:04 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Sat, 6 Feb 2010 01:04:18 +0000 (10:04 +0900)]
s5pc110: aquila: Workaround for key usb download
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Fri, 5 Feb 2010 12:31:59 +0000 (21:31 +0900)]
usbd: check mmc is supported
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 12:07:31 +0000 (21:07 +0900)]
s5pc110: wmg160: USB support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 11:51:06 +0000 (20:51 +0900)]
Merge branch 'master' of kmpark@party:/pub/git/u-boot-s5pc1xx
Kyungmin Park [Fri, 5 Feb 2010 11:51:02 +0000 (20:51 +0900)]
s5pc110: wmg160: Board detection with GPH3[0:4]
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Minkyu Kang [Fri, 5 Feb 2010 11:45:22 +0000 (20:45 +0900)]
s5pc110: wmg160: No MMC support
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 11:36:52 +0000 (20:36 +0900)]
s5pc110: wmg160: Fixme board detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 11:19:38 +0000 (20:19 +0900)]
s5pc110: wmg160: Fix wrong machine detection
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 11:08:01 +0000 (20:08 +0900)]
s5pc110: wmg160: No MMC & LCD support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 10:52:48 +0000 (19:52 +0900)]
s5pc110: wmg160: GPIO I2C support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 10:33:35 +0000 (19:33 +0900)]
s5pc110: wmg160: Display EVT0 when CPU is EVT0
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 10:30:14 +0000 (19:30 +0900)]
s5pc110: wmg160: initial support
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Kyungmin Park [Fri, 5 Feb 2010 09:35:48 +0000 (18:35 +0900)]
s5pc110: wmg160: Add machine ID
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
MyungJoo Ham [Fri, 5 Feb 2010 09:26:45 +0000 (18:26 +0900)]
Revert "s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH""
This reverts commit
0d7a106f48488a48180441086648536f12fc4117.
PDA_ACTIVE OUTPUT-HIGH is for "IDLE" not for "SLEEP"
Wait until H/W confirms about this and use the old values.
Joonyoung Shim [Fri, 5 Feb 2010 04:54:33 +0000 (13:54 +0900)]
s5pc110: aquila: set KEEP_STATE at FM_RST gpio
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Joonyoung Shim [Fri, 5 Feb 2010 03:01:46 +0000 (12:01 +0900)]
s5pc110: aquila: Set CODEC_LDO_EN gpio to KEEP_STATE
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
MyungJoo Ham [Fri, 5 Feb 2010 01:38:47 +0000 (10:38 +0900)]
s5pc110: aries: GPIO PDA_ACTIVE is not "OUTPUT-HIGH"
H/W requested this setting. Modem should follow this change in
order to prevent sleep current leakage.
Donghwa Lee [Fri, 5 Feb 2010 00:52:43 +0000 (09:52 +0900)]
s5pc110: lcd: code clean
Donghwa Lee [Fri, 5 Feb 2010 00:21:18 +0000 (09:21 +0900)]
s5pc110: lcd: code clean
Kyungmin Park [Thu, 4 Feb 2010 23:21:11 +0000 (08:21 +0900)]
s5pc110: aries: Add LDO_CODEC_EN comments
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Joonyoung Shim [Thu, 4 Feb 2010 12:53:58 +0000 (21:53 +0900)]
s5pc110: aries: Set LDO_CODEC_EN gpio to KEEP_STATE
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
MyungJoo Ham [Thu, 4 Feb 2010 12:44:07 +0000 (21:44 +0900)]
s5pc110: aries: copied BCM4329 comments from aquila
Kyungmin Park [Thu, 4 Feb 2010 12:09:03 +0000 (21:09 +0900)]
s5pc110: aquila: Add BCM4329 comments for sleep current
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Donghwa Lee [Thu, 4 Feb 2010 10:25:24 +0000 (19:25 +0900)]
s5pc110: lcd: code clean
Jaehoon Chung [Thu, 4 Feb 2010 08:23:46 +0000 (17:23 +0900)]
s5pc110: aries: set KEEP_STATE at Wlan_bt_en & Wlan_nRST
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
MyungJoo Ham [Thu, 4 Feb 2010 06:42:22 +0000 (15:42 +0900)]
s5pc110: UART_SEL is OUTPUT_LOW at powerdown (UART=CP)
Donghwa Lee [Thu, 4 Feb 2010 05:58:44 +0000 (14:58 +0900)]
s5pc110: neptune: clean spi platform data
Ladislav Michl [Mon, 1 Feb 2010 22:34:25 +0000 (23:34 +0100)]
ns16550: kick watchdog while waiting for a character
ns16550 busyloops waiting for incoming byte causing watchdog to reboot
while waiting for a key press. A call to WATCHDOG_RESET in NS16550_getc
loop fixes it.
Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Remy Bohmer [Mon, 1 Feb 2010 18:40:47 +0000 (19:40 +0100)]
USB: usb_control_msg wait for driver ISR to set status.
This patch changes usb_control_msg back to the state prior to commit
48867208444cb2a82e2af9c3249e90b7ed4a1751.
The USB driver ISR routine may update the status.
Signed-off-by: Daniel Hellstrom <daniel@gaisler.com>
Prathap Srinivas [Mon, 11 Jan 2010 10:06:46 +0000 (15:36 +0530)]
musb: Add host support for DM365 EVM
Add support for musb host on DM365 EVM.
Signed-off-by: Prathap Srinivas <msprathap@ti.com>
Cliff Cai [Tue, 19 Jan 2010 05:10:42 +0000 (00:10 -0500)]
usb: musb: fix Blackfin DMA register padding
The conversion from offsets to C structs lost a little padding in the DMA
register map. Accessing endpoints other than ep0 with DMA would fail as
the addresses wouldn't be adjusted correctly.
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Wed, 3 Feb 2010 19:22:10 +0000 (20:22 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
Wolfgang Denk [Wed, 3 Feb 2010 19:15:46 +0000 (20:15 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-cfi-flash
Wolfgang Denk [Wed, 3 Feb 2010 19:10:20 +0000 (20:10 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Wed, 3 Feb 2010 19:05:27 +0000 (20:05 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Wed, 3 Feb 2010 19:03:46 +0000 (20:03 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-video
Wolfgang Denk [Mon, 1 Feb 2010 10:36:29 +0000 (11:36 +0100)]
EXBITGEN: drop support for unmaintained board
The EXBITGEN board has not been maintained for a long time; it has
build problems, but no hardware is available any more for testing.
Drop support for this board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Sun, 31 Jan 2010 21:03:15 +0000 (22:03 +0100)]
mpc5xxx/cpu_init.c: fix warning: unused variable 'cdm'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Wolfgang Denk [Sun, 31 Jan 2010 20:58:48 +0000 (21:58 +0100)]
mpc5xxx/cpu_init.c: fix warning: unused variable 'gpt0'
Signed-off-by: Wolfgang Denk <wd@denx.de>
Acked-by: Detlev Zundel <dzu@denx.de>
Matthias Fuchs [Mon, 1 Feb 2010 12:54:09 +0000 (13:54 +0100)]
ppc4xx: Remove unused feature from AR405 board
This patch fixes building for AR405 boards by remove an unused feature.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Mon, 1 Feb 2010 12:53:59 +0000 (13:53 +0100)]
ppc4xx: Fix building for PLU405 boards
The init_coupler() function from board/esd/plu405/plu405.c
got lost somehow! This patch readds it.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Matthias Fuchs [Mon, 1 Feb 2010 12:53:47 +0000 (13:53 +0100)]
ppc4xx: Fix building of PMC440 board
Remove some unused features and default environment variable
to shrink the PMC440 u-boot.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 26 Jan 2010 12:33:29 +0000 (13:33 +0100)]
ppc4xx: Fix compilation error on ML2 board
Recently this compilation error occurs:
Configuring for ML2 board...
traps.c: In function 'MachineCheckException':
traps.c:159: error: 'debugger_exception_handler' undeclared (first use
in this function)
traps.c:159: error: (Each undeclared identifier is reported only once
traps.c:159: error: for each function it appears in.)
This patch now fixes it by including kgdb.h
Signed-off-by: Stefan Roese <sr@denx.de>