Ville Syrjälä [Fri, 25 Jan 2013 19:44:44 +0000 (21:44 +0200)]
drm/i915: Pass VLV_DISPLAY_BASE + reg to intel_{hdmi, dp}_init on VLV
When passing the DP/HDMI/SDVO registers to the encoder init functions,
include the VLV specific offset in the value.
v2: Resolved conflicts w/ VLV SDVO elimination
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 25 Jan 2013 19:44:43 +0000 (21:44 +0200)]
drm/i915: VLV doesn't have SDVO
Don't call intel_sdvo_init() for VLV.
Preserve the same behaviour as when intel_sdvo_init() would
have returned false.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 25 Jan 2013 19:44:42 +0000 (21:44 +0200)]
drm/i915: Always use adpa_reg
Instead of using ADPA/VLV_ADPA/PCH_ADPA in various parts of
intel_crt code, just use adpa_reg which always contains the
correct value for the platform.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 25 Jan 2013 19:44:41 +0000 (21:44 +0200)]
drm/i915: PLL registers need an offset on VLV
v2: Dropped the clock gating registers
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:56 +0000 (15:29 +0200)]
drm/i915: Set display_mmio_offset for VLV
This will cause display registers to include the correct
offset on VLV.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:55 +0000 (15:29 +0200)]
drm/i915: GPIO/GMBUS registers need an offset on VLV
GPIO/GMBUS registers must be offset on VLV, so simply
adjust gpio_mmio_base to include the correct offset.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:53 +0000 (15:29 +0200)]
drm/i915: DPIO registers are VLV only and need an offset
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:52 +0000 (15:29 +0200)]
drm/i915: Spell out VLV_DISPLAY_BASE for interrupt registers
Instead of 0x18xxxx use (VLV_DISPLAY_BASE + xxxx).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:51 +0000 (15:29 +0200)]
drm/i915: Make VLV_GUNIT_CLOCK_GATE register value more readable
Instead of 0x18xxxx use (VLV_DISPLAY_BASE + xxxx).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:48 +0000 (15:29 +0200)]
drm/i915: FB_BLC_SELF_VLV is VLV only and needs an offset
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:47 +0000 (15:29 +0200)]
drm/i915: Pipe palette registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:46 +0000 (15:29 +0200)]
drm/i915: Pipe timing registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:44 +0000 (15:29 +0200)]
drm/i915: PORT_HOTPLUG registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:43 +0000 (15:29 +0200)]
drm/i915: Panel fitter registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:41 +0000 (15:29 +0200)]
drm/i915: DPFLIPSTAT and DPINVGTT registers are VLV only and need an offset
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:39 +0000 (15:29 +0200)]
drm/i915: DSPFW registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:38 +0000 (15:29 +0200)]
drm/i915: VLV_DDL is VLV only and needs an offset
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:37 +0000 (15:29 +0200)]
drm/i915: Cursor registers need an offset on VLV
CURSIZE is not present on VLV, so it was left out, as were the IVB
specific cursor B registers.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:36 +0000 (15:29 +0200)]
drm/i915: Pipe registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:35 +0000 (15:29 +0200)]
drm/i915: Primary plane registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:32 +0000 (15:29 +0200)]
drm/i915: PIPE M/N registers need an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:31 +0000 (15:29 +0200)]
drm/i915: VLV_VIDEO_DIP_CTL is for VLV only
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:30 +0000 (15:29 +0200)]
drm/i915: Per-pipe PP registers are for VLV only
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:29 +0000 (15:29 +0200)]
drm/i915: AUD_VID_DID needs an offset on VLV
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:28 +0000 (15:29 +0200)]
drm/i915: Add display_display_mmio_offset to intel_device_info
Add an optional offset to intel_device_info, which will added
to most display register offsets.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:27 +0000 (15:29 +0200)]
drm/i915: Convert intel_dp to enum port
Use intel_dig_port->port rather than intel_dp->output_reg.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 24 Jan 2013 13:29:26 +0000 (15:29 +0200)]
drm/i915: Convert intel_hdmi to enum port
Use intel_dig_port->port rather than intel_hdmi->sdvox_erg.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Paulo Zanoni [Fri, 18 Jan 2013 20:29:03 +0000 (18:29 -0200)]
drm/i915: don't save/restore DSPARB on gen5+
Because the register does not exist in gen5+.
This patch solves "unclaimed register" messages on Haswell after
suspend/resume.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Tue, 22 Jan 2013 14:33:27 +0000 (15:33 +0100)]
drm/i915: fixup sbi_read/write locking
commit
09153000b8ca32a539a1207edebabd0d40b6c61b
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Dec 12 14:06:44 2012 +0100
drm/i915: rework locking for intel_dpio|sbi_read|write
reworked the locking around sbi_read/write functions for 3.8-fixes.
But
commit
dde86e2db54545ef981b64805097a7b4c3156d6e
Author: Paulo Zanoni <paulo.r.zanoni@intel.com>
Date: Sat Dec 1 12:04:25 2012 -0200
drm/i915: add lpt_init_pch_refcl
Added new use-cases in the -next tree which has not been updated in
the merge. Fix it up.
Reported-by: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Tested-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Wang Xingchao [Tue, 22 Jan 2013 15:25:25 +0000 (23:25 +0800)]
drm/i915: HDMI/DP - ELD info refresh support for Haswell
ELD info should be updated dynamically according to hot plug event.
For haswell chip, clear/set the eld valid bit and output enable bit
from callback intel_disable/eanble_ddi().
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Wang Xingchao <xingchao.wang@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mika Kuoppala [Tue, 22 Jan 2013 12:12:17 +0000 (14:12 +0200)]
drm/i915: use gem_set_seqno() on hardware init
When machine was rebooted or module was reloaded,
gem_hw_init() set last_seqno to be identical to next_seqno.
This lead to situation that waits for first ever request
always passed immediately regardless if it was actually
executed.
Use gem_set_seqno() to be consistent how hw is
initialized on init, wrap and on resume.
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 22 Jan 2013 10:50:36 +0000 (12:50 +0200)]
drm/i915: add quirk to invert brightness on Packard Bell NCL20
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=44156
Reported-by: Alan Zimmerman <alan.zimm@gmail.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 22 Jan 2013 10:50:35 +0000 (12:50 +0200)]
drm/i915: add quirk to invert brightness on eMachines e725
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=31522#c35
[Note: There are more than one broken setups in the bug. This fixes one.]
Reported-by: Martins <andrissr@inbox.lv>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Jani Nikula [Tue, 22 Jan 2013 10:50:34 +0000 (12:50 +0200)]
drm/i915: add quirk to invert brightness on eMachines G725
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=59628
Reported-by: Roland Gruber <post@rolandgruber.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 6 Dec 2012 15:23:37 +0000 (16:23 +0100)]
drm/i915: clarify concurrent hang detect/gpu reset consistency
Damien Lespiau wondered how race the gpu reset/hang detection code is
against concurrent gpu resets/hang detections or combinations thereof.
Luckily the single work item is guranteed to never run concurrently,
so reset handling is already single-threaded.
Hence we only have to worry about concurrent hang detections, or a
hang detection firing off while we're still processing an older gpu
reset request. Due to the new mechanism of setting the reset in
progress flag and the ordering guaranteed by the schedule_work
function there's nothing to do but add a comment explaining why we're
safe.
The only thing I've noticed is that we still try to reset the gpu now,
even when it is declared terminally wedged. Add a check for that to
avoid continous warnings about failed resets, in case the hangcheck
timer ever gets stuck.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 6 Dec 2012 08:01:42 +0000 (09:01 +0100)]
drm/i915: create a race-free reset detection
With the previous patch the state transition handling of the reset
code itself is now (hopefully) race free and solid. But that still
leaves out everyone else - with the various lock-free wait paths
we have there's the possibility that the reset happens between the
point where we read the seqno we should wait on and the actual wait.
And if __wait_seqno then never sees the RESET_IN_PROGRESS state, we'll
happily wait for a seqno which will in all likelyhood never signal.
In practice this is not a big problem since the X server gets
constantly interrupted, and can then submit more work (hopefully) to
unblock everyone else: As soon as a new seqno write lands, all waiters
will unblock. But running the i-g-t reset testcase ZZ_hangman can
expose this race, especially on slower hw with fewer cpu cores.
Now looking forward to ARB_robustness and friends that's not the best
possible behaviour, hence this patch adds a reset_counter to be able
to detect any reset, even if a given thread never observed the
in-progress state.
The important part is to correctly order things:
- The write side needs to increment the counter after any seqno gets
reset. Hence we need to do that at the end of the reset work, and
again wake everyone up. We also need to place a barrier in between
any possible seqno changes and the counter increment, since any
unlock operations only guarantee that nothing leaks out, but not
that at later load operation gets moved ahead.
- On the read side we need to ensure that no reset can sneak in and
invalidate the seqno. In all cases we can use the one-sided barrier
that unlock operations guarantee (of the lock protecting the
respective seqno/ring pair) to ensure correct ordering. Hence it is
sufficient to place the atomic read before the mutex/spin_unlock and
no additional barriers are required.
The end-result of all this is that we need to wake up everyone twice
in a reset operation:
- First, before the reset starts, to get any lockholders of the locks,
so that the reset can proceed.
- Second, after the reset is completed, to allow waiters to properly
and reliably detect the reset condition and bail out.
I admit that this entire reset_counter thing smells a bit like
overkill, but I think it's justified since it makes it really explicit
what the bail-out condition is. And we need a reset counter anyway to
implement ARB_robustness, and imo with finer-grained locking on the
horizont this is the most resilient scheme I could think of.
v2: Drop spurious change in the wait_for_error EXIT_COND - we only
need to wait until we leave the reset-in-progress wedged state.
v3: Don't play tricks with barriers in the throttle ioctl, the
spin_unlock is barrier enough.
I've also considered using a little helper to grab the current
reset_counter, but then decided that hiding the atomic_read isn't a
great idea, since having it explicitly show up in the code is a nice
remainder to reviews to check the memory barriers.
v4: Add a comment to explain why we need to fall through in
__wait_seqno in the end variable assignments.
v5: Review from Damien:
- s/smb/smp/ in a comment
- don't increment the reset counter after we've set it to WEDGED. Now
we (again) properly wedge the gpu when the reset fails.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 9 Oct 2012 18:24:38 +0000 (19:24 +0100)]
drm/i915: Only apply the mb() when flushing the GTT domain during a finish
Now that we seem to have brought order to the GTT barriers, the last one
to review is the terminal barrier before we unbind the buffer from the
GTT. This needs to only be performed if the buffer still resides in the
GTT domain, and so we can skip some needless barriers otherwise.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 9 Oct 2012 18:24:37 +0000 (19:24 +0100)]
drm/i915: Only insert the mb() before updating the fence parameter
With a fence, we only need to insert a memory barrier around the actual
fence alteration for CPU accesses through the GTT. Performing the
barrier in flush-fence was inserting unnecessary and expensive barriers
for never fenced objects.
Note removing the barriers from flush-fence, which was effectively a
barrier before every direct access through the GTT, revealed that we
where missing a barrier before the first access through the GTT. Lack of
that barrier was sufficient to cause GPU hangs.
v2: Add a couple more comments to explain the new barriers
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 15 Nov 2012 16:17:22 +0000 (17:17 +0100)]
drm/i915: clear up wedged transitions
We have two important transitions of the wedged state in the current
code:
- 0 -> 1: This means a hang has been detected, and signals to everyone
that they please get of any locks, so that the reset work item can
do its job.
- 1 -> 0: The reset handler has completed.
Now the last transition mixes up two states: "Reset completed and
successful" and "Reset failed". To distinguish these two we do some
tricks with the reset completion, but I simply could not convince
myself that this doesn't race under odd circumstances.
Hence split this up, and add a new terminal state indicating that the
hw is gone for good.
Also add explicit #defines for both states, update comments.
v2: Split out the reset handling bugfix for the throttle ioctl.
v3: s/tmp/wedged/ sugested by Chris Wilson. Also fixup up a rebase
error which prevented this patch from actually compiling.
v4: To unify the wedged state with the reset counter, keep the
reset-in-progress state just as a flag. The terminally-wedged state is
now denoted with a big number.
v5: Add a comment to the reset_counter special values explaining that
WEDGED & RESET_IN_PROGRESS needs to be true for the code to be
correct.
v6: Fixup logic errors introduced with the wedged+reset_counter
unification. Since WEDGED implies reset-in-progress (in a way we're
terminally stuck in the dead-but-reset-not-completed state), we need
ensure that we check for this everywhere. The specific bug was in
wait_for_error, which would simply have timed out.
v7: Extract an inline i915_reset_in_progress helper to make the code
more readable. Also annote the reset-in-progress case with an
unlikely, to help the compiler optimize the fastpath. Do the same for
the terminally wedged case with i915_terminally_wedged.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Nov 2012 16:14:06 +0000 (17:14 +0100)]
drm/i915: fix reset handling in the throttle ioctl
While auditing the code I've noticed one place (the throttle ioctl)
which does not yet wait for the reset handler to complete and doesn't
properly decode the wedge state into -EAGAIN/-EIO. Fix this up by
calling the right helpers. This might explain the oddball "my
compositor just died in a successfull gpu reset" reports. Or maybe not, since
current mesa doesn't use this ioctl to throttle command submission.
The throttle ioctl doesn't take the struct_mutex, so to avoid busy-looping
with -EAGAIN while a reset is in process, check for errors first and wait
for the handler to complete if a reset is pending by calling
i915_gem_wait_for_error.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Nov 2012 16:14:05 +0000 (17:14 +0100)]
drm/i915: move wedged to the other gpu error handling stuff
And to make Ben Widawsky happier, use the gpu_error instead of
the entire device as the argument in some functions.
Drop the outdated comment on ->wedged for now, a follow-up patch will
change the semantics and add a proper comment again.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Nov 2012 16:14:04 +0000 (17:14 +0100)]
drm/i915: extract hangcheck/reset/error_state state into substruct
This has been sprinkled all over the place in dev_priv. I think
it'd be good to also move all the code into a separate file like
i915_gem_error.c, but that's for another patch.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Wed, 14 Nov 2012 16:14:03 +0000 (17:14 +0100)]
drm/i915: move dev_priv->mm out of line
Tha one is really big, since it contains tons of comments explaining
how things work. Which is nice ;-)
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 18 Jan 2013 20:30:34 +0000 (12:30 -0800)]
agp/intel: Add gma_bus_addr
It is no longer used in the i915 code, so isolate it from the shared
struct.
This was originally part of:
commit
0e275518f325418d559c05327775bff894b237f7
Author: Ben Widawsky <ben@bwidawsk.net>
Date: Mon Jan 14 13:35:33 2013 -0800
agp/intel: decouple more of the agp-i915 sharing
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
That commit had some other hunks which can't be used due to issues
Daniel found in previous commits.
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: drop squash notice from the commit since it's imo ok to keep
this one separate.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 18 Jan 2013 20:30:33 +0000 (12:30 -0800)]
drm/i915: Needs_dmar, not
The reasoning behind our code taking two paths depending upon whether or
not we may have been configured for IOMMU isn't clear to me. It should
always be safe to use the pci mapping functions as they are designed to
abstract the decision we were handling in i915.
Aside from simpler code, removing another member for the intel_gtt
struct is a nice motivation.
I ran this by Chris, and he wasn't concerned about the extra kzalloc,
and memory references vs. page_to_phys calculation in the case without
IOMMU.
v2: Update commit message
v3: Remove needs_dmar addition from Zhenyu upstream
This reverts (and then other stuff)
commit
20652097dadd9a7fb4d652f25466299974bc78f9
Author: Zhenyu Wang <zhenyuw@linux.intel.com>
Date: Thu Dec 13 23:47:47 2012 +0800
drm/i915: Fix missed needs_dmar setting
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: Squash in follow-up fix to remove the bogus hunk which
deleted the dma_mask configuration for gen6+.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 18 Jan 2013 20:30:32 +0000 (12:30 -0800)]
drm/i915: Remove scratch page from shared
We already had a mapping in both (minus the phys_addr in AGP).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Fri, 18 Jan 2013 20:30:31 +0000 (12:30 -0800)]
drm/i915: Cut out the infamous ILK w/a from AGP layer
And, move it to where the rest of the logic is.
There is some slight functionality changes. There was extra paranoid
checks in AGP code making sure we never do idle maps on gen2 parts. That
was not duplicated as the simple PCI id check should do the right thing.
v2: use IS_GEN5 && IS_MOBILE check instead. For now, this is the same as
IS_IRONLAKE_M but is more future proof. The workaround docs hint that
more than one platform may be effected, but we've never seen such a
platform in the wild. (Rodrigo, Daniel)
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v1)
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 17 Jan 2013 14:31:31 +0000 (16:31 +0200)]
drm/i915: Provide the quantization range in the AVI infoframe
The AVI infoframe is able to inform the display whether the source is
sending full or limited range RGB data.
As per CEA-861 [1] we must first check whether the display reports the
quantization range as selectable, and if so we can set the approriate
bits in the AVI inforframe.
[1] CEA-861-E - 6.4 Format of Version 2 AVI InfoFrame
v2: Give the Q bits better names, add spec chapter information
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 17 Jan 2013 14:31:30 +0000 (16:31 +0200)]
drm/edid: Add drm_rgb_quant_range_selectable()
drm_rgb_quant_range_selectable() will report whether the monitor
claims to support for RGB quantization range selection.
The information can be found in the CEA Video capability block.
v2: s/quantzation/quantization/ in the comment
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 17 Jan 2013 14:31:29 +0000 (16:31 +0200)]
drm/i915: Add "Automatic" mode for the "Broadcast RGB" property
Add a new "Automatic" mode to the "Broadcast RGB" range property.
When selected the driver automagically selects between full range and
limited range output.
Based on CEA-861 [1] guidelines, limited range output is selected if the
mode is a CEA mode, except 640x480. Otherwise full range output is used.
Additionally DVI monitors should most likely default to full range
always.
As per DP1.2a [2] DisplayPort should always use full range for 18bpp, and
otherwise will follow CEA-861 rules.
NOTE: The default value for the property will now be "Automatic"
so some people may be affected in case they're relying on the
current full range default.
[1] CEA-861-E - 5.1 Default Encoding Parameters
[2] VESA DisplayPort Ver.1.2a - 5.1.1.1 Video Colorimetry
v2: Use has_hdmi_sink to check if a HDMI monitor is present
v3: Add information about relevant spec chapters
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Thu, 17 Jan 2013 14:31:28 +0000 (16:31 +0200)]
drm/i915: Fix RGB color range property for PCH platforms
The RGB color range select bit on the DP/SDVO/HDMI registers
disappeared when PCH was introduced, and instead a new PIPECONF bit
was added that performs the same function.
Add a new INTEL_MODE_LIMITED_COLOR_RANGE private mode flag, and set
it in the encoder mode_fixup if limited color range is requested.
Set the the PIPECONF bit 13 based on the flag.
Experimentation showed that simply toggling the bit while the pipe is
active doesn't work. We need to restart the pipe, which luckily already
happens.
The DP/SDVO/HDMI bit 8 is marked MBZ in the docs, so avoid setting it,
although it doesn't seem to do any harm in practice.
TODO:
- the PIPECONF bit too seems to have disappeared from HSW. Need a
volunteer to test if it's just a documentation issue or if it's really
gone. If the bit is gone and no easy replacement is found, then I suppose
we may need to use the pipe CSC unit to perform the range compression.
v2: Use mode private_flags instead of intel_encoder virtual functions
v3: Moved the intel_dp color_range handling after bpc check to help
later patches
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46800
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:17 +0000 (12:45 -0800)]
drm/i915: Remove use of gtt_mappable_entries
Mappable_end, ie. size is almost always what you want as opposed to the
number of entries. Since we already have that information, we can scrap
the number of entries and only calculate it when needed.
If gtt_start is !0, this will have slightly different behavior. This
difference can only occur in DRI1, and exists when we try to kick out
the firmware fb. The new code seems like a bugfix to me.
The other case where we've changed the behavior is during init we check
the mappable region against our current known upper and lower limits
(64MB, and 512MB). This now matches the comment, and makes things more
convenient after removing gtt_mappable_entries.
Also worth noting is the setting of mappable_end is taken out of setup
because we do it earlier now in the DRI2 case and therefore need to add
that tiny hunk to support the DRI1 IOCTL.
v2: Move up mappable end to before legacy AGP init
v3: Add the dev_priv inclusion here from previous rebase error in patch
5
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
[danvet: squash in fix for a printk format flag mismatch warning.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:16 +0000 (12:45 -0800)]
drm/i915: Remove use on gma_bus_addr on gen6+
We have enough info to not use the intel_gtt bridge stuff.
v2: Move setup of mappable_base above the legacy init stuff because we
still need that on older platforms. (Daniel)
v3: Remove the dev_priv hunk which was rebased in by accident
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com> (v2)
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:15 +0000 (12:45 -0800)]
drm/i915: Create a gtt structure
The purpose of the gtt structure is to help isolate our gtt specific
properties from the rest of the code (in doing so it help us finish the
isolation from the AGP connection).
The following members are pulled out (and renamed):
gtt_start
gtt_total
gtt_mappable_end
gtt_mappable
gtt_base_addr
gsm
The gtt structure will serve as a nice place to put gen specific gtt
routines in upcoming patches. As far as what else I feel belongs in this
structure: it is meant to encapsulate the GTT's physical properties.
This is why I've not added fields which track various drm_mm properties,
or things like gtt_mtrr (which is itself a pretty transient field).
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit messages]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:14 +0000 (12:45 -0800)]
drm/i915: Remove gtt_mappable_total
With the assertion from the previous patch in place, it should be safe
to get rid gtt_mappable_total. Keeps things saner to not have to track
the same info in two places.
In order to keep the diff as simple as possible and keep with the
existing gtt_setup semantics we opt to keep gtt_mappable_end. It's not
as consistent with the 'total' used in the previous patch, but that can
be fixed later.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
[Ben modified commit message]
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:13 +0000 (12:45 -0800)]
drm/i915: Mappable_end can't ever be > end
Both DRI1 and DRI2 can never specify a mappable size which goes past the
GTT size. Don't pretend otherwise.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ben Widawsky [Thu, 17 Jan 2013 20:45:12 +0000 (12:45 -0800)]
drm/i915: Kill gtt_end
It's duplicated in the more useful gtt_total.
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@gmail.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Wed, 16 Jan 2013 17:59:03 +0000 (19:59 +0200)]
drm/i915: Fix SPRITE0_FLIP_DONE_INT_EN_VLV and SPRITE0_FLIPDONE_INT_STATUS_VLV
Fix up some copypaste errors in the PIPESTAT register for VLV.
SPRITE0_FLIP_DONE_INT_EN_VLV is bit 22, not bit 26.
SPRITE0_FLIPDONE_INT_STATUS_VLV is bit 14, not bit 15.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 8 Jan 2013 10:53:17 +0000 (10:53 +0000)]
drm/i915: Use the reloc.handle as an index into the execbuffer array
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 623000.0/sec.
i3-330m: 748000.0/sec to 789000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 17 Jan 2013 21:23:36 +0000 (22:23 +0100)]
drm/i915: Allow userspace to hint that the relocations were known
Userspace is able to hint to the kernel that its command stream and
auxiliary state buffers already hold the correct presumed addresses and
so the relocation process may be skipped if the kernel does not need to
move any buffers in preparation for the execbuffer. Thus for the common
case where the allotment of buffers is static between batches, we can
avoid the overhead of individually checking the relocation entries.
Note that this requires userspace to supply the domain tracking and
requests for workarounds itself that would otherwise be computed based
upon the relocation entries.
Using copywinwin10 as an example that is dependent upon emitting a lot
of relocations (2 per operation), we see improvements of:
c2d/gm45: 618000.0/sec to 632000.0/sec.
i3-330m: 748000.0/sec to 830000.0/sec.
(measured relative to a baseline with neither optimisations applied).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
[danvet: Fixup merge conflict in userspace header due to different
baseline trees.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 8 Jan 2013 10:53:15 +0000 (10:53 +0000)]
drm/i915: Move the execbuffer objects list from the stack into the tracker
Instead of passing around the eb-objects hashtable and a separate object
list, we can include the object list into the eb-objects structure for
convenience.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 8 Jan 2013 10:53:14 +0000 (10:53 +0000)]
drm/i915: Take the handle idr spinlock once for looking up the exec objects
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 8 Jan 2013 10:53:13 +0000 (10:53 +0000)]
drm/i915: Mark a temporary allocation for copy-from-user as such
The difference is that the kernel will then know that this memory will
be reclaimable in the near future.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 8 Jan 2013 10:53:09 +0000 (10:53 +0000)]
drm/i915: Bail if we attempt to allocate pages for a purged object
Move the existing checking inside bind_to_gtt() to the more appropriate
layer in order to prevent recreation of the pages after they have been
explicitly truncated.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 15 Jan 2013 12:39:35 +0000 (12:39 +0000)]
drm/i915: Add a debug interface to forcibly evict and shrink our object caches
As a means to investigate some bad system behaviour related to the
purging of the active, inactive and unbound lists, it is useful to be
able to manually control when those lists should be cleared.
v2: use _safe list iterators as we kick objects from the list as we
walk.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Add a small comment explaining why we don't need to check and
wait for gpu resets, acked by Chris on irc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 7 Jan 2013 19:47:35 +0000 (21:47 +0200)]
drm/i915: use gtt_get_size() instead of open coding it
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 7 Jan 2013 19:47:34 +0000 (21:47 +0200)]
drm/i915: merge {i965, sandybridge}_write_fence_reg()
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Imre Deak [Mon, 7 Jan 2013 19:47:33 +0000 (21:47 +0200)]
drm/i915: merge get_gtt_alignment/get_unfenced_gtt_alignment()
The two functions are rather similar, so merge them.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Egbert Eich [Thu, 10 Jan 2013 15:02:39 +0000 (10:02 -0500)]
drm/i915: Remove pch_rq_mask from struct drm_i915_private.
This variable is only used locally in the irq postinstall
functions for ivybridge and ironlake.
Signed-off-by: Egbert Eich <eich@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Daniel Vetter [Thu, 20 Dec 2012 20:24:07 +0000 (21:24 +0100)]
drm/i915: wake up all pageflip waiters
Otherwise it seems like we can get stuck with concurrent waiters.
Right now this /shouldn't/ be a problem, since all pending pageflip
waiters are serialized by the one mode_config.mutex, so there's at
most on waiter. But better paranoid than sorry, since this is tricky
code.
v2: WARN_ON(waitqueue_active) before waiting, as suggested by Chris
Wilson.
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Thu, 17 Jan 2013 10:34:08 +0000 (20:34 +1000)]
Merge tag 'drm-intel-next-2012-12-21' of git://people.freedesktop.org/~danvet/drm-intel into drm-next
Daniel writes:
- seqno wrap fixes and debug infrastructure from Mika Kuoppala and Chris
Wilson
- some leftover kill-agp on gen6+ patches from Ben
- hotplug improvements from Damien
- clear fb when allocated from stolen, avoids dirt on the fbcon (Chris)
- Stolen mem support from Chris Wilson, one of the many steps to get to
real fastboot support.
- Some DDI code cleanups from Paulo.
- Some refactorings around lvds and dp code.
- some random little bits&pieces
* tag 'drm-intel-next-2012-12-21' of git://people.freedesktop.org/~danvet/drm-intel: (93 commits)
drm/i915: Return the real error code from intel_set_mode()
drm/i915: Make GSM void
drm/i915: Move GSM mapping into dev_priv
drm/i915: Move even more gtt code to i915_gem_gtt
drm/i915: Make next_seqno debugs entry to use i915_gem_set_seqno
drm/i915: Introduce i915_gem_set_seqno()
drm/i915: Always clear semaphore mboxes on seqno wrap
drm/i915: Initialize hardware semaphore state on ring init
drm/i915: Introduce ring set_seqno
drm/i915: Missed conversion to gtt_pte_t
drm/i915: Bug on unsupported swizzled platforms
drm/i915: BUG() if fences are used on unsupported platform
drm/i915: fixup overlay stolen memory leak
drm/i915: clean up PIPECONF bpc #defines
drm/i915: add intel_dp_set_signal_levels
drm/i915: remove leftover display.update_wm assignment
drm/i915: check for the PCH when setting pch_transcoder
drm/i915: Clear the stolen fb before enabling
drm/i915: Access to snooped system memory through the GTT is incoherent
drm/i915: Remove stale comment about intel_dp_detect()
...
Conflicts:
drivers/gpu/drm/i915/intel_display.c
Linus Torvalds [Thu, 10 Jan 2013 02:59:55 +0000 (18:59 -0800)]
Linux 3.8-rc3
Linus Torvalds [Wed, 9 Jan 2013 16:58:57 +0000 (08:58 -0800)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM fixes from Russell King.
* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel
ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable
ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b
ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM
ARM: 7611/1: VIC: fix bug in VIC irqdomain code
ARM: 7610/1: versatile: bump IRQ numbers
ARM: 7609/1: disable errata work-arounds which access secure registers
ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier
Linus Torvalds [Wed, 9 Jan 2013 16:43:56 +0000 (08:43 -0800)]
Merge tag 'edac_fixes_for_3.8' of git://git./linux/kernel/git/bp/bp
Pull EDAC fixes from Borislav Petkov:
"Two error path fixes causing a crash and a Kconfig fix for an issue
which spilled all EDAC suboptions into the 'Device Drivers' menu."
* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC: Cleanup device deregistering path
EDAC: Fix EDAC Kconfig menu
EDAC: Fix kernel panic on module unloading
Linus Torvalds [Wed, 9 Jan 2013 16:36:54 +0000 (08:36 -0800)]
mm: reinstante dropped pmd_trans_splitting() check
The check for a pmd being in the process of being split was dropped by
mistake by commit
d10e63f29488 ("mm: numa: Create basic numa page
hinting infrastructure"). Put it back.
Reported-by: Dave Jones <davej@redhat.com>
Debugged-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Marc Dionne [Wed, 9 Jan 2013 14:16:30 +0000 (14:16 +0000)]
cred: Remove tgcred pointer from struct cred
Commit
3a50597de863 ("KEYS: Make the session and process keyrings
per-thread") removed the definition of the thread_group_cred structure,
but left a now unused pointer in struct cred.
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Wed, 9 Jan 2013 02:53:56 +0000 (18:53 -0800)]
Merge tag 'fixes' of git://git./linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"People are back from the holiday breaks, and it shows. Here are a
bunch of fixes for a number of platforms:
- A couple of small fixes for Nomadik
- A larger set of changes for kirkwood/mvebu
- uart driver selection, dt clocks, gpio-poweroff fixups, a few
__init annotation fixes and some error handling improvement in
their xor dma driver.
- i.MX had a couple of minor fixes (and a critical one for flexcan2
clock setup)
- MXS has a small board fix and a framebuffer bugfix
- A set of fixes for Samsung Exynos, fixing default bootargs and some
Exynos5440 clock issues
- A set of OMAP changes including PM fixes and a few sparse warning
fixups
All in all a bit more positive code delta than we'd ideally want to
see here, mostly from the OMAP PM changes, but nothing overly crazy."
* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
ARM: clps711x: Fix bad merge of clockevents setup
ARM: highbank: save and restore L2 cache and GIC on suspend
ARM: highbank: add a power request clear
ARM: highbank: fix secondary boot and hotplug
ARM: highbank: fix typos with hignbank in power request functions
ARM: dts: fix highbank cpu mpidr values
ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
ARM: mx5: Fix MX53 flexcan2 clock
ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
pinctrl: mvebu: make pdma clock on dove mandatory
ARM: Dove: Add pinctrl clock to DT
dma: mv_xor: fix error handling for clocks
dma: mv_xor: fix error handling of mv_xor_channel_add()
arm: mvebu: Add missing ; for cpu node.
arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
arm: mvebu: Armada XP MV78230 has two cores, not one
clk: mvebu: Remove inappropriate __init tagging
ARM: Kirkwood: Use fixed-regulator instead of board gpio call
ARM: Kirkwood: Fix missing sdio clock
ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
...
Linus Torvalds [Wed, 9 Jan 2013 00:08:10 +0000 (16:08 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm update from Dave Airlie:
"Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in.
It's a bit big but its mostly exynos license fix ups and I'd rather
not hold those up since its legally stuff.
Radeon has a couple of fixes from dma engine work, TTM is just a
locking fix, and dma-buf fix has been hanging around and I finally got
a chance to review it."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
drm/ttm: fix fence locking in ttm_buffer_object_transfer
drm/prime: drop reference on imported dma-buf come from gem
drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
drm/exynos: move finish page flip to a common place
drm/exynos: fimd: modify condition in fimd resume
drm/radeon: fix DMA CS parser for r6xx linear copy packet
drm/radeon: split r6xx and r7xx copy_dma functions
drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
drm/exynos: Remove redundant NULL check
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
drm/exynos: fix gem buffer allocation type checking
drm/exynos: remove needless parenthesis.
drm/exynos: fix incorrect interrupt induced by m2m operation.
...
Olof Johansson [Tue, 8 Jan 2013 17:49:50 +0000 (09:49 -0800)]
Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git./linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren:
The biggest change is a fix to deal with different power state
on omap2 registers that causes issues trying to use common PM code.
Also fix few incorrect registers, and an issue for omap1 USB, and
few sparse fixes for issues that sneaked in with all the clean-up.
* tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
ARM: OMAP1: fix USB configuration use-after-release
ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values
ARM: OMAP3: clock data: Add missing enable/disable for EMU clock
ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
ARM: OMAP4: PRM: Correct reset source map
ARM: OMAP: SRAM: resolve sparse warnings
ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
ARM: OMAP: 32k counter: resolve sparse warnings
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 8 Jan 2013 17:42:52 +0000 (09:42 -0800)]
Merge branch 'v3.8-samsung-fixes-2' of git://git./linux/kernel/git/kgene/linux-samsung into fixes
From Kukjin Kim:
Most of them are EXYNOS5440 fixes which are for changing uart console,
cpu id (typo) and silent complaining gpio error in kernel boot.
* 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: skip the clock initialization for exynos5440
ARM: EXYNOS: enable PINCTRL for EXYNOS5440
ARM: dts: use uart port1 for console on exynos4210-smdkv310
ARM: dts: use uart port0 for console on exynos5440-ssdk5440
ARM: SAMSUNG: fix the cpu id for EXYNOS5440
ARM: EXYNOS: Revise HDMI resource size
Olof Johansson [Tue, 8 Jan 2013 16:39:27 +0000 (08:39 -0800)]
Merge tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo:
I have to send one critical mxsfb fix through arm-soc, as FB maintainer
is unresponsive for quite a while. People start complaining the missing
of such an important fix.
* tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
video: mxsfb: fix crash when unblanking the display
ARM: dts: imx23-olinuxino: Fix IOMUX settings
Olof Johansson [Tue, 8 Jan 2013 16:39:00 +0000 (08:39 -0800)]
Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo:
It includes one critical fix - wrong flexcan2 clock will hang system
when the port gets brought up. The other two are non-critical fixes,
which are sent together here, since it's still early -rc stage.
* tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mx5: Fix MX53 flexcan2 clock
ARM: dts: imx31-bug: Fix manufacturer compatible string
clk: imx: Remove 'clock-output-names' from the examples
Linus Torvalds [Tue, 8 Jan 2013 15:33:41 +0000 (07:33 -0800)]
Merge tag 'sound-3.8' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Nothing too exciting here, just a few regression and trivial fixes,
and new quirks for HD-audio and USB-audio.
- HD-audio mute LED mode enum fix
- Fix kernel panic of Digidesign Mbox2 usb-audio quirk (which was new
in 3.8-rc1)
- Creative BT-D1 usb-audio quirk
- mute LED fixup for HP Pavillion 17 laptop"
* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec)
ALSA: au88x0: fix incorrect left shift
sound: oss/pas2: Fix possible access out of array
ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk
ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks
ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrol
Linus Torvalds [Tue, 8 Jan 2013 15:31:49 +0000 (07:31 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) New sysctl ndisc_notify needs some documentation, from Hanns
Frederic Sowa.
2) Netfilter REJECT target doesn't set transport header of SKB
correctly, from Mukund Jampala.
3) Forcedeth driver needs to check for DMA mapping failures, from Larry
Finger.
4) brcmsmac driver can't use usleep_range while holding locks, use
udelay instead. From Niels Ole Salscheider.
5) Fix unregister of netlink bridge multicast database handlers, from
Vlad Yasevich and Rami Rosen.
6) Fix checksum calculations in netfilter's ipv6 network prefix
translation module.
7) Fix high order page allocation failures in netfilter xt_recent, from
Eric Dumazet.
8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because
mac802154_process_data() can execute in process rather than
interrupt context. From Alexander Aring.
9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one
tcp_push() too many. From Eric Dumazet and Willy Tarreau.
10) Fix skb->truesize tracking in XEN netfront driver, from Ian
Campbell.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
xen/netfront: improve truesize tracking
ipv4: fix NULL checking in devinet_ioctl()
tcp: fix MSG_SENDPAGE_NOTLAST logic
net/ipv4/ipconfig: really display the BOOTP/DHCP server's address.
ip-sysctl: fix spelling errors
mac802154: fix NOHZ local_softirq_pending 08 warning
ipv6: document ndisc_notify in networking/ip-sysctl.txt
ath9k: Fix Kconfig for ATH9K_HTC
netfilter: xt_recent: avoid high order page allocations
netfilter: fix missing dependencies for the NOTRACK target
netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation
bridge: add empty br_mdb_init() and br_mdb_uninit() definitions.
vxlan: allow live mac address change
bridge: Correctly unregister MDB rtnetlink handlers
brcmfmac: fix parsing rsn ie for ap mode.
brcmsmac: add copyright information for Canonical
rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call
rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call
...
Daniel Vetter [Tue, 18 Dec 2012 21:25:11 +0000 (22:25 +0100)]
drm/ttm: fix fence locking in ttm_buffer_object_transfer
Noticed while reviewing the fence locking in the radeon pageflip
handler.
v2: Instead of grabbing the bdev->fence_lock in object_transfer just
move the single callsite of that function a few lines, so that it is
protected by the fence_lock. Suggested by Jerome Glisse.
v3: Fix typo in commit message.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Olof Johansson [Tue, 8 Jan 2013 05:09:17 +0000 (21:09 -0800)]
Merge tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux into fixes
From Jason Cooper:
fixes for mvebu/kirkwood v3.8
- use correct uart driver for mvebu boards
- add a missing DT clocks
- gpio-poweroff level vs. edge triggering, use gpio_is_valid()
- remove an inappropriate __init, modules need to access function.
- various DT fixes
- error handling in mv_xor
* tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux:
pinctrl: mvebu: make pdma clock on dove mandatory
ARM: Dove: Add pinctrl clock to DT
dma: mv_xor: fix error handling for clocks
dma: mv_xor: fix error handling of mv_xor_channel_add()
arm: mvebu: Add missing ; for cpu node.
arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
arm: mvebu: Armada XP MV78230 has two cores, not one
clk: mvebu: Remove inappropriate __init tagging
ARM: Kirkwood: Use fixed-regulator instead of board gpio call
ARM: Kirkwood: Fix missing sdio clock
ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
Power: gpio-poweroff: Fix documentation and gpio_is_valid
ARM: Kirkwood: Fix missing clk for USB device.
arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Sat, 5 Jan 2013 16:33:30 +0000 (08:33 -0800)]
ARM: clps711x: Fix bad merge of clockevents setup
I mismerged a previous branch from Alexander, and accidentally left
in ARCH_USES_GETTIMEOFFSET. Remove it.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Alexander Shiyan <shc_work@mail.ru>
Olof Johansson [Sat, 5 Jan 2013 02:45:08 +0000 (18:45 -0800)]
Merge tag 'nomadik-fixes-for-arm-soc' of git://git./linux/kernel/git/linusw/linux-nomadik into fixes
From Linus Walleij:
Two fixes to the Nomadik:
- Delete a dangling include
- Bump IRQ numbers to offset at 32
* tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: nomadik: bump the IRQ numbers again
ARM: nomadik: delete dangling include
Rob Herring [Sun, 30 Dec 2012 16:15:07 +0000 (10:15 -0600)]
ARM: highbank: save and restore L2 cache and GIC on suspend
This fixes suspend to RAM adding necessary save and restore of L2 and GIC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Sun, 30 Dec 2012 16:15:06 +0000 (10:15 -0600)]
ARM: highbank: add a power request clear
When we fail to power down, we need to clear out the power request.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Sun, 30 Dec 2012 16:15:05 +0000 (10:15 -0600)]
ARM: highbank: fix secondary boot and hotplug
With commit 384a290 (ARM: gic: use a private mapping for CPU target
interfaces), wake-up IPIs now go to all cores as the gic cpu interface
numbering may not follow core numbering. This broke secondary boot on
highbank since the boot address was already set for all secondary cores,
this caused all cores to boot before the kernel was ready.
Fix this by moving the setting of the jump address to
highbank_boot_secondary instead of highbank_smp_prepare_cpus and
highbank_cpu_die. Also, clear the address when we boot. This prevents
cores from booting before they are actually triggered and is also necessary
to get suspend/resume to work.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Nicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Sun, 30 Dec 2012 16:15:04 +0000 (10:15 -0600)]
ARM: highbank: fix typos with hignbank in power request functions
s/hignbank/highbank/
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Sun, 30 Dec 2012 16:15:03 +0000 (10:15 -0600)]
ARM: dts: fix highbank cpu mpidr values
With the addition of commit
a0ae0240 (ARM: kernel: add device tree init
map function), the cpu reg values must match the cpu mpidr register or we'll
get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg
value needs to be 0x90n to quiet the warnings.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Rob Herring [Sun, 30 Dec 2012 16:15:02 +0000 (10:15 -0600)]
ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
While device_type is considered deprecated, it is still needed for tools
like lshw to identify cpu nodes.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Dave Airlie [Tue, 8 Jan 2013 04:52:52 +0000 (14:52 +1000)]
Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux into drm-next
Alex writes:
A few more fixes for DMA and a mac quirk.
* 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
drm/radeon: fix DMA CS parser for r6xx linear copy packet
drm/radeon: split r6xx and r7xx copy_dma functions
Seung-Woo Kim [Thu, 27 Sep 2012 06:30:06 +0000 (15:30 +0900)]
drm/prime: drop reference on imported dma-buf come from gem
Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem
makes memory leak. release function of dma-buf cannot be called because f_count
of dma-buf increased by importing gem and gem ref count cannot be decrease
because of exported dma-buf.
So I add dma_buf_put() for imported gem come from its own gem into each drivers
having prime_import and prime_export capabilities. With this, only gem ref
count is increased if importing gem exported from gem of same driver.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Ian Campbell [Mon, 7 Jan 2013 05:32:06 +0000 (05:32 +0000)]
xen/netfront: improve truesize tracking
Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller
than that. We have already accounted for this in
NETFRONT_SKB_CB(skb)->pull_to so use that instead.
Fixes WARN_ON from skb_try_coalesce.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Sander Eikelenboom <linux@eikelenboom.it>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: annie li <annie.li@oracle.com>
Cc: xen-devel@lists.xen.org
Cc: netdev@vger.kernel.org
Cc: stable@kernel.org # 3.7.x only
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dave Airlie [Tue, 8 Jan 2013 03:39:02 +0000 (13:39 +1000)]
Merge branch 'exynos-drm-fixes' of git://git./linux/kernel/git/daeinki/drm-exynos into drm-next
Summary:
- change exynos file license
. Most of exynos files had been copied from some randome
file and not updated correctly(wrong company name used).
This was our mistakes so chagnes it correctly. For this,
I'm not sure that this patch should go to -fix or -next.
So please give me any comment if there is any problem.
- consider buffer allocation without iommu
. Without iommu, dma_alloc_attrs function allocates some
memory region and returns cpu address so this patch makes
the cpu address to be set to buf->kvaddr correctly
- cleanups to ipp relevant codes.
- use common finish page flip function
. to avoid the duplication of same code, use
exynos_drm_crtc_finish_pageflip function commonly instead
of each one.
- fix fimd resume issue.
. when fimd was turned off by suspend, there was one issue that
the fimd wasn't turned on by resume so fix it chaing resume
condition.
* 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (25 commits)
drm/exynos: move finish page flip to a common place
drm/exynos: fimd: modify condition in fimd resume
drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
drm/exynos: Remove redundant NULL check
drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
drm/exynos: fix gem buffer allocation type checking
drm/exynos: remove needless parenthesis.
drm/exynos: fix incorrect interrupt induced by m2m operation.
drm/exynos: remove color bar pattern operation.
drm/exynos: correct some comments to abbreviation.
drm/exynos: fix build warning.
drm/exynos: consider both case of vflip and hflip.
drm/exynos: remove needless error handling to property.
...
David S. Miller [Tue, 8 Jan 2013 03:25:13 +0000 (19:25 -0800)]
Merge branch 'master' of git://1984.lsi.us.es/nf
Pablo Neira Ayuso says:
====================
The following batch contains Netfilter fixes for 3.8-rc2, they are:
* Fix IPv6 stateless network/port translation (NPT) checksum
calculation, from Ulrich Weber.
* Fix for xt_recent to avoid memory allocation failures if large
hashtables are used, from Eric Dumazet.
* Fix missing dependencies in Kconfig for the deprecated NOTRACK,
from myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Marek Vasut [Mon, 7 Jan 2013 14:27:00 +0000 (15:27 +0100)]
ARM: mx5: Fix MX53 flexcan2 clock
The second FlexCAN port uses different clock than the first one, configure
correct clock to prevent hanging of the system during bringing up of the port.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>