fs/reiserfs: use an IS_ERR test rather than a NULL test

In case of error, the function open_xa_dir returns an ERR pointer, but
never returns a NULL pointer.  So a NULL test that comes after an IS_ERR
test should be deleted.

The semantic match that finds this problem is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@match_bad_null_test@
expression x, E;
statement S1,S2;
@@
x = open_xa_dir(...)
... when != x = E
(
*  if (x == NULL && ...) S1 else S2
|
*  if (x == NULL || ...) S1 else S2
)
// </smpl>

Signed-off-by: Julien Brunel <brunel@diku.dk>
Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Jan Kara <jack@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

reiserfs/procfs.c: remove CVS keywords

Remove CVS keywords that weren't updated for a long time from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfs: fix namelength memory corruption

Fix a stack corruption caused by a corrupted hfs filesystem.  If the
catalog name length is corrupted the memcpy overwrites the catalog btree
structure.  Since the field is limited to HFS_NAMELEN bytes in the
structure and the file format, we throw an error if it is too long.

Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: check read_mapping_page() return value

While testing more corrupted images with hfsplus, i came across
one which triggered the following bug:

[15840.675016] BUG: unable to handle kernel paging request at fffffffb
[15840.675016] IP: [<c0116a4f>] kmap+0x15/0x56
[15840.675016] *pde = 00008067 *pte = 00000000
[15840.675016] Oops: 0000 [#1] PREEMPT DEBUG_PAGEALLOC
[15840.675016] Modules linked in:
[15840.675016]
[15840.675016] Pid: 11575, comm: ln Not tainted (2.6.27-rc4-00123-gd3ee1b4-dirty #29)
[15840.675016] EIP: 0060:[<c0116a4f>] EFLAGS: 00010202 CPU: 0
[15840.675016] EIP is at kmap+0x15/0x56
[15840.675016] EAX: 00000246 EBX: fffffffb ECX: 00000000 EDX: cab919c0
[15840.675016] ESI: 000007dd EDI: cab0bcf4 EBP: cab0bc98 ESP: cab0bc94
[15840.675016]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[15840.675016] Process ln (pid: 11575, ti=cab0b000 task=cab919c0 task.ti=cab0b000)
[15840.675016] Stack: 00000000 cab0bcdc c0231cfb 00000000 cab0bce0 00000800 ca9290c0 fffffffb
[15840.675016]        cab145d0 cab919c0 cab15998 22222222 22222222 22222222 00000001 cab15960
[15840.675016]        000007dd cab0bcf4 cab0bd04 c022cb3a cab0bcf4 cab15a6c ca9290c0 00000000
[15840.675016] Call Trace:
[15840.675016]  [<c0231cfb>] ? hfsplus_block_allocate+0x6f/0x2d3
[15840.675016]  [<c022cb3a>] ? hfsplus_file_extend+0xc4/0x1db
[15840.675016]  [<c022ce41>] ? hfsplus_get_block+0x8c/0x19d
[15840.675016]  [<c06adde4>] ? sub_preempt_count+0x9d/0xab
[15840.675016]  [<c019ece6>] ? __block_prepare_write+0x147/0x311
[15840.675016]  [<c0161934>] ? __grab_cache_page+0x52/0x73
[15840.675016]  [<c019ef4f>] ? block_write_begin+0x79/0xd5
[15840.675016]  [<c022cdb5>] ? hfsplus_get_block+0x0/0x19d
[15840.675016]  [<c019f22a>] ? cont_write_begin+0x27f/0x2af
[15840.675016]  [<c022cdb5>] ? hfsplus_get_block+0x0/0x19d
[15840.675016]  [<c0139ebe>] ? tick_program_event+0x28/0x4c
[15840.675016]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[15840.675016]  [<c022b723>] ? hfsplus_write_begin+0x2d/0x32
[15840.675016]  [<c022cdb5>] ? hfsplus_get_block+0x0/0x19d
[15840.675016]  [<c0161988>] ? pagecache_write_begin+0x33/0x107
[15840.675016]  [<c01879e5>] ? __page_symlink+0x3c/0xae
[15840.675016]  [<c019ad34>] ? __mark_inode_dirty+0x12f/0x137
[15840.675016]  [<c0187a70>] ? page_symlink+0x19/0x1e
[15840.675016]  [<c022e6eb>] ? hfsplus_symlink+0x41/0xa6
[15840.675016]  [<c01886a9>] ? vfs_symlink+0x99/0x101
[15840.675016]  [<c018a2f6>] ? sys_symlinkat+0x6b/0xad
[15840.675016]  [<c018a348>] ? sys_symlink+0x10/0x12
[15840.675016]  [<c01038bd>] ? sysenter_do_call+0x12/0x31
[15840.675016]  =======================
[15840.675016] Code: 00 00 75 10 83 3d 88 2f ec c0 02 75 07 89 d0 e8 12 56 05 00 5d c3 55 ba 06 00 00 00 89 e5 53 89 c3 b8 3d eb 7e c0 e8 16 74 00 00 <8b> 03 c1 e8 1e 69 c0 d8 02 00 00 05 b8 69 8e c0 2b 80 c4 02 00
[15840.675016] EIP: [<c0116a4f>] kmap+0x15/0x56 SS:ESP 0068:cab0bc94
[15840.675016] ---[ end trace 4fea40dad6b70e5f ]---

This happens because the return value of read_mapping_page() is passed on
to kmap unchecked.  The bug is triggered after the first
read_mapping_page() in hfsplus_block_allocate(), this patch fixes all
three usages in this functions but leaves the ones further down in the
file unchanged.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: fix Buffer overflow with a corrupted image

When an hfsplus image gets corrupted it might happen that the catalog
namelength field gets b0rked.  If we mount such an image the memcpy() in
hfsplus_cat_build_key_uni() writes more than the 255 that fit in the name
field.  Depending on the size of the overwritten data, we either only get
memory corruption or also trigger an oops like this:

[  221.628020] BUG: unable to handle kernel paging request at c82b0000
[  221.629066] IP: [<c022d4b1>] hfsplus_find_cat+0x10d/0x151
[  221.629066] *pde = 0ea29163 *pte = 082b0160
[  221.629066] Oops: 0002 [#1] PREEMPT DEBUG_PAGEALLOC
[  221.629066] Modules linked in:
[  221.629066]
[  221.629066] Pid: 4845, comm: mount Not tainted (2.6.27-rc4-00123-gd3ee1b4-dirty #28)
[  221.629066] EIP: 0060:[<c022d4b1>] EFLAGS: 00010206 CPU: 0
[  221.629066] EIP is at hfsplus_find_cat+0x10d/0x151
[  221.629066] EAX: 00000029 EBX: 00016210 ECX: 000042c2 EDX: 00000002
[  221.629066] ESI: c82d70ca EDI: c82b0000 EBP: c82d1bcc ESP: c82d199c
[  221.629066]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[  221.629066] Process mount (pid: 4845, ti=c82d1000 task=c8224060 task.ti=c82d1000)
[  221.629066] Stack: c080b3c4 c82aa8f8 c82d19c2 00016210 c080b3be c82d1bd4 c82aa8f0 00000300
[  221.629066]        01000000 750008b1 74006e00 74006900 65006c00 c82d6400 c013bd35 c8224060
[  221.629066]        00000036 00000046 c82d19f0 00000082 c8224548 c8224060 00000036 c0d653cc
[  221.629066] Call Trace:
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c0107aa3>] ? native_sched_clock+0x82/0x96
[  221.629066]  [<c01302d2>] ? __kernel_text_address+0x1b/0x27
[  221.629066]  [<c010487a>] ? dump_trace+0xca/0xd6
[  221.629066]  [<c0109e32>] ? save_stack_address+0x0/0x2c
[  221.629066]  [<c0109eaf>] ? save_stack_trace+0x1c/0x3a
[  221.629066]  [<c013b571>] ? save_trace+0x37/0x8d
[  221.629066]  [<c013b62e>] ? add_lock_to_list+0x67/0x8d
[  221.629066]  [<c013ea1c>] ? validate_chain+0x8a4/0x9f4
[  221.629066]  [<c013553d>] ? down+0xc/0x2f
[  221.629066]  [<c013f1f6>] ? __lock_acquire+0x68a/0x6e0
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c0107aa3>] ? native_sched_clock+0x82/0x96
[  221.629066]  [<c013da5d>] ? mark_held_locks+0x43/0x5a
[  221.629066]  [<c013dc3a>] ? trace_hardirqs_on+0xb/0xd
[  221.629066]  [<c013dbf4>] ? trace_hardirqs_on_caller+0xf4/0x12f
[  221.629066]  [<c06abec8>] ? _spin_unlock_irqrestore+0x42/0x58
[  221.629066]  [<c013555c>] ? down+0x2b/0x2f
[  221.629066]  [<c022aa68>] ? hfsplus_iget+0xa0/0x154
[  221.629066]  [<c022b0b9>] ? hfsplus_fill_super+0x280/0x447
[  221.629066]  [<c0107aa3>] ? native_sched_clock+0x82/0x96
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013f1f6>] ? __lock_acquire+0x68a/0x6e0
[  221.629066]  [<c041c9e4>] ? string+0x2b/0x74
[  221.629066]  [<c041cd16>] ? vsnprintf+0x2e9/0x512
[  221.629066]  [<c010487a>] ? dump_trace+0xca/0xd6
[  221.629066]  [<c0109eaf>] ? save_stack_trace+0x1c/0x3a
[  221.629066]  [<c0109eaf>] ? save_stack_trace+0x1c/0x3a
[  221.629066]  [<c013b571>] ? save_trace+0x37/0x8d
[  221.629066]  [<c013b62e>] ? add_lock_to_list+0x67/0x8d
[  221.629066]  [<c013ea1c>] ? validate_chain+0x8a4/0x9f4
[  221.629066]  [<c01354d3>] ? up+0xc/0x2f
[  221.629066]  [<c013f1f6>] ? __lock_acquire+0x68a/0x6e0
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c013bca3>] ? trace_hardirqs_off_caller+0x14/0x9b
[  221.629066]  [<c013bd35>] ? trace_hardirqs_off+0xb/0xd
[  221.629066]  [<c0107aa3>] ? native_sched_clock+0x82/0x96
[  221.629066]  [<c041cfb7>] ? snprintf+0x1b/0x1d
[  221.629066]  [<c01ba466>] ? disk_name+0x25/0x67
[  221.629066]  [<c0183960>] ? get_sb_bdev+0xcd/0x10b
[  221.629066]  [<c016ad92>] ? kstrdup+0x2a/0x4c
[  221.629066]  [<c022a7b3>] ? hfsplus_get_sb+0x13/0x15
[  221.629066]  [<c022ae39>] ? hfsplus_fill_super+0x0/0x447
[  221.629066]  [<c0183583>] ? vfs_kern_mount+0x3b/0x76
[  221.629066]  [<c0183602>] ? do_kern_mount+0x32/0xba
[  221.629066]  [<c01960d4>] ? do_new_mount+0x46/0x74
[  221.629066]  [<c0196277>] ? do_mount+0x175/0x193
[  221.629066]  [<c013dbf4>] ? trace_hardirqs_on_caller+0xf4/0x12f
[  221.629066]  [<c01663b2>] ? __get_free_pages+0x1e/0x24
[  221.629066]  [<c06ac07b>] ? lock_kernel+0x19/0x8c
[  221.629066]  [<c01962e6>] ? sys_mount+0x51/0x9b
[  221.629066]  [<c01962f9>] ? sys_mount+0x64/0x9b
[  221.629066]  [<c01038bd>] ? sysenter_do_call+0x12/0x31
[  221.629066]  =======================
[  221.629066] Code: 89 c2 c1 e2 08 c1 e8 08 09 c2 8b 85 e8 fd ff ff 66 89 50 06 89 c7 53 83 c7 08 56 57 68 c4 b3 80 c0 e8 8c 5c ef ff 89 d9 c1 e9 02 <f3> a5 89 d9 83 e1 03 74 02 f3 a4 83 c3 06 8b 95 e8 fd ff ff 0f
[  221.629066] EIP: [<c022d4b1>] hfsplus_find_cat+0x10d/0x151 SS:ESP 0068:c82d199c
[  221.629066] ---[ end trace e417a1d67f0d0066 ]---

Since hfsplus_cat_build_key_uni() returns void and only has one callsite,
the check is performed at the callsite.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Reviewed-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hfsplus: quieten down mounting hfsplus journaled fs read only

Check whether the file system was to be mounted read only anyway before
warning about changing the mount to read only.

Signed-off-by: Mike Crowe <mac@mcrowe.com>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

befs: annotate fs32 on tests for superblock endianness

Does compile-time byteswapping rather than runtime.

Noticed by sparse:
fs/befs/super.c:29:6: warning: cast to restricted __le32
fs/befs/super.c:29:6: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/super.c:31:11: warning: cast to restricted __be32
fs/befs/super.c:31:11: warning: cast from restricted fs32
fs/befs/linuxvfs.c:811:7: warning: cast to restricted __le32
fs/befs/linuxvfs.c:811:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32
fs/befs/linuxvfs.c:812:7: warning: cast to restricted __be32
fs/befs/linuxvfs.c:812:7: warning: cast from restricted fs32

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: "Sergey S. Kostyliov" <rathamahata@php4.ru>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: avoid printk floods in the face of directory corruption

A very large directory with many read failures (either due to storage
problems, or due to invalid size & blocks from corruption) will generate a
printk storm as the filesystem continues to try to read all the blocks.
This flood of messages can tie up the box until it is complete - which may
be a very long time, especially for very large corrupted values.

This is fixed by only reporting the corruption once each time we try to
read the directory.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Eugene Teo <eugeneteo@kernel.sg>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ext2: fix ext2 block reservation early ENOSPC issue

We could run into ENOSPC error on ext2, even when there is free blocks on
the filesystem.

The problem is triggered in the case the goal block group has 0 free
blocks , and the rest block groups are skipped due to the check of
"free_blocks < windowsz/2".  Current code could fall back to non
reservation allocation to prevent early ENOSPC after examing all the block
groups with reservation on , but this code was bypassed if the reservation
window is turned off already, which is true in this case.

This patch fixed two issues:
1) We don't need to turn off block reservation if the goal block group has
0 free blocks left and continue search for the rest of block groups.

Current code the intention is to turn off the block reservation if the
goal allocation group has a few (some) free blocks left (not enough for
make the desired reservation window),to try to allocation in the goal
block group, to get better locality.  But if the goal blocks have 0 free
blocks, it should leave the block reservation on, and continues search for
the next block groups,rather than turn off block reservation completely.

2) we don't need to check the window size if the block reservation is off.

The problem was originally found and fixed in ext4.

Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

telephony: remove CVS keywords

Remove CVS keywords that weren't updated for a long time from comments.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: make the resource type an unsigned long

PnP encodes the resource type directly as its struct resource->flags value
which is an unsigned long.  Make it so...

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Andi Kleen <andi@firstfloor.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pnp: remove printk() with outdated version

There's no point in printing some ancient version number forever.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Rene Herman <rene.herman@gmail.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Acked-by: Adam M Belay <abelay@MIT.EDU>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon_set_all_vcs: fix kernel crash when switching the rotated consoles

echo 3 >> /sys/class/graphics/fbcon/rotate_all, then switch to another
console. Result:

BUG: unable to handle kernel paging request at ffffc20005d00000
IP: [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109
PGD 7e228067 PUD 7e229067 PMD 7bc1f067 PTE 0
Oops: 0002 [1] SMP
CPU 1
Modules linked in: [...a lot...]
Pid: 10, comm: events/1 Not tainted 2.6.26.5-45.fc9.x86_64 #1
RIP: 0010:[bitfill_aligned+149/265]  [bitfill_aligned+149/265] bitfill_aligned+0x95/0x109
RSP: 0018:ffff81007d811bc8  EFLAGS: 00010216
RAX: ffffc20005d00000 RBX: 0000000000000000 RCX: 0000000000000400
RDX: 0000000000000000 RSI: ffffc20005d00000 RDI: ffffffffffffffff
RBP: ffff81007d811be0 R08: 0000000000000400 R09: 0000000000000040
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000010000
R13: ffffffff811632f0 R14: 0000000000000006 R15: ffff81007cb85400
FS:  0000000000000000(0000) GS:ffff81007e004780(0000) knlGS:0000000000000000
CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
CR2: ffffc20005d00000 CR3: 0000000000201000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process events/1 (pid: 10, threadinfo ffff81007d810000, task ffff81007d808000)
Stack:  ffff81007c9d75a0 0000000000000000 0000000000000000 ffff81007d811c80
 ffffffff81163a61 ffff810000000000 ffffffff8115f9c8 0000001000000000
 0000000100aaaaaa 000000007cd0d4a0 fffffd8a00000800 0001000000000000
Call Trace:
 [cfb_fillrect+523/798] cfb_fillrect+0x20b/0x31e
 [soft_cursor+416/436] ? soft_cursor+0x1a0/0x1b4
 [ccw_clear_margins+205/263] ccw_clear_margins+0xcd/0x107
 [fbcon_clear_margins+59/61] fbcon_clear_margins+0x3b/0x3d
 [fbcon_switch+1291/1466] fbcon_switch+0x50b/0x5ba
 [redraw_screen+261/481] redraw_screen+0x105/0x1e1
 [ccw_cursor+0/1869] ? ccw_cursor+0x0/0x74d
 [complete_change_console+48/190] complete_change_console+0x30/0xbe
 [change_console+115/120] change_console+0x73/0x78
 [console_callback+0/292] ? console_callback+0x0/0x124
 [console_callback+97/292] console_callback+0x61/0x124
 [schedule_delayed_work+25/30] ? schedule_delayed_work+0x19/0x1e
 [run_workqueue+139/282] run_workqueue+0x8b/0x11a
 [worker_thread+221/238] worker_thread+0xdd/0xee
 [autoremove_wake_function+0/56] ? autoremove_wake_function+0x0/0x38
 [worker_thread+0/238] ? worker_thread+0x0/0xee
 [kthread+73/118] kthread+0x49/0x76
 [child_rip+10/18] child_rip+0xa/0x12
 [kthread+0/118] ? kthread+0x0/0x76
 [child_rip+0/18] ? child_rip+0x0/0x12

Because fbcon_set_all_vcs()->FBCON_SWAP() uses display->rotate == 0 instead
of fbcon_ops->rotate, and vc_resize() has no effect because it is called with
new_cols/rows == ->vc_cols/rows.

Tested on 2.6.26.5-45.fc9.x86_64, but
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git seems to
have the same problem.

Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: <stable@kernel.org> [2.6.27.x, 2.6.26.x, maybe 2.6.25.x]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: add new TMIO framebuffer driver

Add driver for TMIO framebuffer cells as found e.g. in Toshiba TC6393XB
chips.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Ian Molton <spyro@f2s.com>
Acked-by: Samuel Ortiz <sameo@openedhand.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: Epson S1D1 framebuffer maintainer

I'm stepping up as maintainer for the Epson S1D13XXXFB driver since I have
2 platforms currently using it.

Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Acked-by: Thibaut Varene <varenet@parisc-linux.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

framebuffer: fix carminefb section mismatch

Make alloc_carmine_fb() __devinit.

WARNING: drivers/video/carminefb.o(.text+0x81b): Section mismatch in reference from the function alloc_carmine_fb() to the variable .devinit.data:carminefb_fix

The function alloc_carmine_fb() references the variable __devinitdata
carminefb_fix.  This is often because alloc_carmine_fb lacks a
__devinitdata annotation or the annotation of carminefb_fix is wrong.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Sebastian Siewior <bigeasy@linutronix.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

matroxfb: support G200eV chip

Support the Matrox G200eV chip, based on timings that I found in the X.org
matrox driver.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Petr Vandrovec <vandrove@vc.cvut.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: allow more chip revisions in Epson s1d13... video driver

The Epson s1d13xxx hardware is common in many handhelds, but our driver is
currently locked to a single chip revision.  This patch adds an array of
known to work revisions (which can be extended).

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
Acked-by: Thibaut Varène <varenet@parisc-linux.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: ignore VESA modes if framebuffer does not support them

Currently, it is possible to set a graphics VESA mode at boot time via the
vga= parameter even when no framebuffer driver supporting this is
configured.  This could lead to the system booting with a black screen,
without a usable console.

Fix this problem by only allowing to set graphics modes at boot time if a
supporting framebuffer driver is configured.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vgacon: vgacon_scrolldelta simplification

There's no point in checking diff == c->vc_rows, because it can be true
only when count == 0, but we already checked that.  Additionally move
variables used only in one block to this block.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vgacon: optimize scrolling

Join multiple scr_memcpyw into 1-3 calls (usually 2).  (benchmarked
average speedup: 1%)

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbmon: fix EDID parser to detect interlace modes

The current EDID parser in the linux kernel ignores interlace modes.  The
patch looks for the edid interlace flag and adjusts the vertical
resolution if it is found.

Signed-off-by: Jon Dufresne <jon.dufresne@gmail.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MAINTAINERS: add entry for uvesafb

Add a maintainer entry for the uvesafb driver.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uvesafb: don't treat mode info retrieval failures as errors

Some BIOSes return error codes when queried for information about
modes from their own modelist.  uvesafb treats this as an error
case and bails out.

Change this behavior so that broken modes do not prevent the driver
from working.  Only the failure to retrieve information about any
usable video mode is considered to be an error case.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uvesafb: document mode to mode_option parameter change

Document the change from the old "mode" parameter to the "mode_option"
parameter.

Signed-off-by: Mike Pagano <mpagano@gentoo.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeonfb: accelerate imageblit and other improvements

Implement support for HW color expansion of 1bpp images, along with some
improvements to the FIFO handling and other accel operations.

The offset fixup code is now unnecessary as the fbcon core will call our
set_par upon switch back from KD_GRAPHICS before anything else happens.  I
removed it as it would slow down accel operations.

The fifo wait has been improved to avoid hitting the HW register as often,
and the various accel ops are now performing better caching of register
values.

Overall, this improve accel performances.  The imageblit acceleration does
result in a small overall regression in performances on some machines (on
the order of 5% on some x86), probably becaus the SW path provides a
better bus utilisation, but I decided to ingnore that as the performances
is still very good, and on the other hand, some machines such as some
sparc64 get a 3 fold performance improvement.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeonfb: misc cleanup of engine and dst cache handling

Fix a couple of incomplete tests of the chip families in the engine
init/reset code and proper initialization of the destination cache mode.
The result should better match what the latest X radeon driver does.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

efifb/imacfb consolidation + hardware support

Remove imacfb entirely, merging its DMI table into the (otherwise very
similar) efifb driver.  This also adds hardware support for many of the
newer Intel Apple hardware.  This has been fairly well tested; we've been
shipping it in Fedora for some time.

Signed-off-by: Peter Jones <pjones@redhat.com>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: Jaya Kumar <jayakumar.lkml@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

atmel_lcdfb: disallow setting larger resolution than the framebuffer memory can handle

Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: do not change MCLK for Alpine chips

A memory clock value (MCLK) is changed to a minimum required by a current
mode bandwidth.  This usually lowers the MCLK to its minimum (50 MHz) thus
decreasing the card performance.  Just leave the MCLK value set by card
BIOS.

The CL-GD5446 Technical Reference Manual point 9.9.1.3 states that if a
pixclock value is close (~1%) to the MCLK or MCLK/2 this may result in a
jitter on the screen.  A countermeasure is to use the MCLK as pixclock
source instead of a VCLK.  The patch implements this as well.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: fix 16bpp modes

The 16bpp mode did not work on the Cirrus cards as the visual type was set
to DIRECTCOLOR instead of TRUECOLOR.  The Alpine family used one incorrect
register setting so this 16bpp modes generated wrong horizontal frequency.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add noaccel module parameter

The noaccel parameter is already handled if the driver is not built as
module.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: drop clock fields from cirrusfb_regs structure

Move call to pixclock calculation into the cirrusfb_set_par_foo().  It
makes copy of clock registers redundant.

Simplify clock calculations further.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: eliminate CRT registers from global structure

Move calculations of CRT register values into the cirrusfb_set_par_foo()
where the values are used.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: add __devinit attribute to probing functions

Add __devinit attribute to probing functions.  This fixed section mismatch
warning from my previous patch.

Kill one redundant forward declaration.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: use modedb and add mode_option parameter

Use modedb for initial mode instead of table of few predefined modes.

Add mode_option module parameter as a step toward unification of frame
buffers' parameters.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: drop device pointers from cirrusfb_info

The device pointer can be easily obtained from fb_info->device if needed.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: remove 24 bpp mode

The 24 bpp mode is not implemented.  Disallow it in the
cirrusfb_check_var() and remove it from checks.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: simplify clock calculation

Simplify clock calculation.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: remove information about memory size during mode change

Remove information about memory size displayed twice each time a display
mode change.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

intelfb: support 945GME (as used in ASUS Eee 901)

Add support for Intel's 945GME graphics chip to the intelfb driver.  I
have assumed that the 945GME is identical to the already-supported 945GM
apart from its PCI IDs; this is based on a quick look at the X driver for
these chips which seems to treat them identically.

The 945GME is used in the ASUS Eee 901, and I coded this in the hope that
I'd be able to use it to get a console at the native 1024x600 resolution
which is not known to the BIOS.  I realised too late that the intelfb
driver does not support mode changing on laptops, so it won't be any
use for me.

Signed-off-by: Phil Endecott <spam_from_intelfb@chezphil.org>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: do not make changes to default tdfx_fix

This was suggested by Geert Uytterhoeven to avoid overwriting of default
values from the tdfx_fix.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: remove open_lock mutex

Remove mutex from the fb_open/fb_release functions as these operations are
mutexed at fb layer.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vga16fb: remove open_lock mutex

Remove mutex from the fb_open/fb_release functions as these operations are
mutexed at fb layer.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: kill some redundant code

Move common code outside if/else or switch/case clauses.

Drop checks done twice inside the neofb_check_var().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: kconfig update

Update Kconfig for Permedia 2, Trident and 3Dfx frame buffer drivers.

[akpm@linux-foundation.org: fix Kconfig text]
Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: MAINTAINERS entry

Add maintainers for VIA UniChrome(Pro)/Chrome9 Framebuffer driver

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Signed-off-by: Scott Fang <ScottFang@viatech.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: via_utility.c, via_utility.h, vt1636.c, vt1636.h

via_utility.c, via_utility.h: support user mode application with
additional information vt1636.c, vt1636.h: setting for chip vt1636

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: via_i2c.c, via_i2c.h, viamode.c, viamode.h

via_i2c.c, via_i2c.h: Implement i2c specification.
viamode.c, viamode.c: all support modes information.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: viafbdev.c (update)

Remove the macro MMIO_OUT32, and replace it with writel() function.
And replace "u32" with "unsigned long" in writel() function (original
MMIO_OUT32 marco) for avoiding warning message in 64bit OS.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Acked-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: viafbdev.c, viafbdev.h

Correct by following Jiri Slaby's suggestions.

Initialization, remove and some other important functions of viafb.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: tbl1636.c, tbl1636.h, tblDPASetting.c, tblDPASetting.h

tbl1636.c, tbl1636.h: patch setting for VT1636.
tblDPASetting.c, tblDPASetting.h: patch for graphic clock skew.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: Makefile, share.h

Makefile for drivers/video/via/
share.h: shared macro for viafb

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: lcd.c, lcd.h, lcdtbl.h

lcd.c, lcd.h: LVDS generic process.
lcdtbl.h: patch register for simultaneous case.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: iface.c, iface.h, ioctl.c, ioctl.h

iface.c, iface.h: support getting video memory from backdoor.
ioctl.c, ioctl.h: support user mode application with additional information

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: hw.c, hw.h

Display HW setting and other chips initialization.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: dvi.c, dvi.h, global.c and global.h

dvi.c, dvi.h: TMDS generic process and setting.
global.c, global.h: define global variabls.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: chip.h, debug.h

Header file of information about via chipsets and debug function.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: accel.c, accel.h

2D and HW cursor stuff of viafb driver.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: Makefile, Kconfig

Modified drivers/video/Makefile and drivers/video/Kconfig.

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

viafb: viafb.modes, viafb.txt

Correct via_fb_ to viafb_ and remove the Kconfig part in viafb.txt.

viafb.modes: supported mode table
viafb.txt: documentation of viafb driver

Signed-off-by: Joseph Chan <josephchan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

neofb: reduce panning function

Reduce panning function by deleting checks done by higher layer and
folding remaining function into the called one.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

radeonfb: revert "Fix radeon DDC regression"

The bug was in fb_ddc and was fixed by commit
b64d70825abbf706bbe80be1b11b09514b71f45e (fb_ddc: fix DDC lines quirk) so
the workaround in radeonfb can be removed now.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpiolib: request/free hooks

Add a new internal mechanism to gpiolib to support low power
operations by letting gpio_chip instances see when their GPIOs
are in use.  When no GPIOs are active, chips may be able to
enter lower powered runtime states by disabling clocks and/or
power domains.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: "Magnus Damm" <magnus.damm@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

omap drivers: switch to standard GPIO calls

This updates most of the OMAP drivers which are in mainline to switch to
using the cross-platform GPIO calls instead of the older OMAP-specific
ones.

This is all fairly brainless/obvious stuff.  Probably the most interesting
bit is to observe that the omap-keypad code seems to now have a portable
core that could work with non-OMAP matrix keypads.  (That would improve
with hardware IRQ debouncing enabled, of course...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpiolib: gpio_to_irq() hooks

Add a new gpiolib mechanism: gpio_chip instances can provide mappings
between their (input) GPIOs and any associated IRQs.  This makes it easier
for platforms to support IRQs that are provided by board-specific external
chips instead of as part of their core (such as SOC-integrated GPIOs).

Also update the irq_to_gpio() description, saying to avoid it because it's
not always supported.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: i2c expanders use subsys_init

Make the I2C external GPIO expander drivers register themselves at
subsys_initcall() time when they're statically linked.

SOC-integrated GPIOs are available starting very early -- early in
arch_initcall() at latest, but often even before initcalls start to run --
so this improves consistency, so more subsystems can rely on GPIOs in
their own subsys_initcall() code.

(This isn't a theoretical problem.  This is one of several patches needed
to resolve oopsing observed when statically linking kernels on a DaVinci
EVM.  Its pcf857x GPIOs needed to be available well before some other
drivers initialized.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio_free might sleep, generic part

According to the documentation gpio_free should only be called from task
context only.  To make this more explicit add a might sleep to all
implementations.

This is the generic part which changes gpiolib and the fallback
implementation only.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: max7301: fix the race between chip addition and pins reconfiguration

There is a small race and code ugliness in max7301: pins are reconfigured
after the chip is registered.  Swap these calls so that the device is
registered in correct state.

Also this fixes the comile-time warning about unchecked gpiochip_remove.

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Cc: Juergen Beisert <j.beisert@pengutronix.de>
Cc: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

gpio: make gpiochip label const

Mark gpiochip label as a const char pointer.  Fixes things like

arch/arm/common/scoop.c: In function `scoop_probe':
arch/arm/common/scoop.c:250: warning: assignment discards qualifiers from pointer target type

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-ds1672 new style driver

New style conversion and reformatting as per indent --linux-style

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-max6900 new style driver

New style conversion and reformatting as per indent --linux-style

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Dale Farnsworth <dale@farnsworth.org>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-at91rm9200: remove now-unneeded code

The non-functional periodic IRQ support was previously removed from the
AT91RM9200 RTC driver.  Remove the remaining AT91_RTC_FREQ definition.

Signed-off-by: Andrew Victor <linux@maxim.org.za>
Cc: David Brownell: <david-b@pacbell.net>
Cc: Alessandro Zummo: <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-m41t80.c: add support for the ST M41T65 RTC

Add support for M41T65 Real Time Clock chip.

The main differences I see between the M41T65 and M41T80 are that:

1) The M41T65 watchdog timer has three bits controlling resolution
   (versus two for the M41T80).

2) There is no register 0x13 for controlling square-wave output.

Signed-off-by: Steven A. Falco <sfalco@harris.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: use CONFIG_PPC instead of CONFIG_PPC_MERGE

Now that arch/ppc is dead CONFIG_PPC_MERGE is always defined for all
powerpc platforms and we want to get rid of it use CONFIG_PPC instead.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: file close() consistently disables repeating irqs

Make the rtc framework consistent about disabling 1/second update IRQs
that may have been activated through the /dev interface, when that /dev
file is closed.  (It may have closed because of coredump, etc.) This was
previously done only for emulated update IRQs ...  now, do it always.

Also comment the current policy: repeating IRQs (periodic, update) that
userspace enabled will be cleanly disabled, but alarms are left alone.
Such repeating IRQs are a constant and pointless system load.

Update some RTC drivers to remove now-needless release() methods.  Most
such methods just enforce that policy.  The others all seem to be buggy,
and mistreat in-kernel clients of periodic or alarm IRQs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Sharp <andy.sharp@onstor.com>
Cc: Angelo Castello <angelo.castello@st.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Hommel <thomas.hommel@gefanuc.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-rs5c372: add support for Ricoh R2025S/D RTC

This adds support for the Ricoh R2025S/D series of I2C RTCs, produced by
Ricoh Japan and described at:

http://www.ricoh.co.jp/LSI/product_rtc/2wire/r2025x/

This series has very minor deviations from the rest of the RS5C chips,
most of which have to do with the oscillator, which was abstracted away in
an earlier patch.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: Riku Voipio <riku.voipio@movial.fi>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: rtc-rs5c372: SMBus conversion/support

rtc-rs5c372 presently depends on I2C master mode transfers, despite the
fact that these RTCs frequently find themselves on SMBus-only adapters.

Given that the only capabilities that were checked were for I2C_FUNC_I2C,
it's assumed that most of the adapters that are currently using this
driver are fairly sane, and are able to handle SMBus emulation (though we
adjust the default capabilities to check for I2C_FUNC_SMBUS_EMUL anyways,
which is the vast majority of them.  The adapters that don't have their
own ->smbus_xfer() fall back on the ->master_xfer() through the emulated
transfer).

The special case is iop3xx, which has more than its fair share of hacks
within this driver, it remains untested -- though also claims to support
emulated SMBus accesses.  The corner case there is rs5c_get_regs() which
uses access mode #3 for transferring the register state, while we use mode
#1 for SMBus.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: David Brownell <david-b@pacbell.net>
Tested-by: Riku Voipio <riku.voipio@movial.fi>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

legacy rtc: remove needless/confusing HPET_RTC_IRQ option

HPET_RTC_IRQ is no longer needed; HPET_EMULATE_RTC suffices and is more
correct.  (http://bugzilla.kernel.org/show_bug.cgi?id=11111)

Note that when using the legacy RTC driver, platforms don't really do a
dynamic switch between HPET and non-HPET modes based on whether HPET
hardware actually exists ...  only rtc-cmos (using the new RTC framework)
currently switches that way.

So this reflects bitrot in that legacy code, for x86/ia64: kernels with
HPET support configured (e.g.  for a clocksource) can't get IRQs from the
legacy RTC driver unless they really have HPET hardware.  (The obvious
workaround is to not use the legacy RTC driver on those platforms when you
configure HPET ...  unless you know the target really has a HPET.)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: remove some NOP open/release methods

Remove NOP methods from rtc-pl030 and rtc-pl031 drivers;
this is pure wasted code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-ds1307: alarm support for ds1337/ds1339

Update the ds1307 driver with alarm support for ds1337/ds1339.  This uses
the first alarm (there are two), and matches on seconds, minutes, hours,
and day-of-month.  Tested on ds1339.

[dbrownell@users.sourceforge.net: add comments; fixup style, valid irq
checks, debug dumps; lock; more careful IRQ shutdown; switch BCD2BIN to
bcd2bin (and vice versa); ENOTTY not EINVAL.]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Rodolfo Giometti <giometti@linux.it>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: add device driver for Dallas DS3234 SPI RTC chip

Add support for the Dallas DS3234 chip - extremely accurate SPI bus RTC
with integrated crystal and SRAM.

[akpm@linux-foundation.org: don't use BIN2BCD/BCD2BIN]
Signed-off-by: Dennis Aberilla <denzzzhome@yahoo.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: DS1374 wakeup support

Wakeup support implementation.

Signed-off-by: Marc Pignat <marc.pignat@hevs.ch>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc-pcf8563: remove client validation

Validating clients with black magic register checks doesn't make much
sense for new-style i2c driver and has been known to fail on valid NXP
pcf8563 chips.  This patch removes the client validation code.

Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: add miscellaneous device for ioctls

Add a miscellaneous device to the autofs4 module for routing ioctls.  This
provides the ability to obtain an ioctl file handle for an autofs mount
point that is possibly covered by another mount.

The actual problem with autofs is that it can't reconnect to existing
mounts.  Immediately one things of just adding the ability to remount
autofs file systems would solve it, but alas, that can't work.  This is
because autofs direct mounts and the implementation of "on demand mount
and expire" of nested mount trees have the file system mounted on top of
the mount trigger dentry.

To resolve this a miscellaneous device node for routing ioctl commands to
these mount points has been implemented in the autofs4 kernel module and a
library added to autofs.  This provides the ability to open a file
descriptor for these over mounted autofs mount points.

Please refer to Documentation/filesystems/autofs4-mount-control.txt for a
discussion of the problem, implementation alternatives considered and a
description of the interface.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: build fix]
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: device node ioctl documentation

Add documentation for the miscellaneous device module of autofs4.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: track uid and gid of last mount requester

Track the uid and gid of the last process to request a mount for on an
autofs dentry.

[akpm@linux-foundation.org: fix tpyo in comment]
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

autofs4: cleanup autofs mount type usage

Usage of the AUTOFS_TYPE_* defines is a little confusing and appears
inconsistent.

Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove netlink transport

The netlink transport code has not worked for a while and the miscdev
transport is a simpler solution.  This patch removes the netlink code and
makes the miscdev transport the only eCryptfs kernel to userspace
transport.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
Cc: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dustin Kirkland <kirkland@canonical.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ecryptfs: convert to use new aops

Convert ecryptfs to use write_begin/write_end

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Acked-by: Michael Halcrow <mhalcrow@us.ibm.com>
Cc: Dave Kleikamp <shaggy@austin.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

eCryptfs: remove retry loop in ecryptfs_readdir()

The retry block in ecryptfs_readdir() has been in the eCryptfs code base
for a while, apparently for no good reason.  This loop could potentially
run without terminating.  This patch removes the loop, instead erroring
out if vfs_readdir() on the lower file fails.

Signed-off-by: Michael Halcrow <mhalcrow@us.ibm.com>
Reported-by: Al Viro <viro@ZinIV.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

i2o: Fix 32/64bit DMA locking

The I2O ioctls assume 32bits.  In itself that is fine as they are old
cards and nobody uses 64bit.  However on LKML it was noted this
assumption is also made for allocated memory and is unsafe on 64bit
systems.

Fixing this is a mess.  It turns out there is tons of crap buried in a
header file that does racy 32/64bit filtering on the masks.

So we:
- Verify all callers of the racy code can sleep (i2o_dma_[re]alloc)
- Move the code into a new i2o/memory.c file
- Remove the gfp_mask argument so nobody can try and misuse the function
- Wrap a mutex around the problem area (a single mutex is easy to do and
  none of this is performance relevant)
- Switch the remaining problem kmalloc holdout to use i2o_dma_alloc

Cc: Markus Lidel <Markus.Lidel@shadowconnect.com>
Cc: Vasily Averin <vvs@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi: core and gpio expanders use subsys_init

Make the SPI external GPIO expander drivers register themselves at
subsys_initcall() time when they're statically linked, and make the SPI
core do its driver model initialization earlier so that's safe.

SOC-integrated GPIOs are available starting very early -- often before
initcalls start to run, or earily in arch_initcall() at latest -- so this
improves consistency, letting more subsystems rely on GPIOs being usable
by their own subsys_initcall() code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

orion_spi: handle 88F6183 erratum

Add support to orion_spi for the 88F6183 ARM SoC by adding code to work
around a 6183-specific erratum.

Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pxa2xx_spi: fix chip_info defaults and documentation.

Make the chip info structure data optional by providing reasonable
defaults.  Improve corresponding documentation, and highlight the drawback
of not providing explicit chipselect control.

DMA can determine appropriate dma_burst_size and thresholds automatically
so use DMA even if dma_burst_size is not specified.

Signed-off-by: Vernon Sauder <VernonInHand@gmail.com>
Reviewed-by: Ned Forrester <nforrester@whoi.edu>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pxa2xx_spi: minor cleanup

Minor fixes: remove redundant local variable initialization, fix "can not"
to what I _think_ is a preferred spelling, output IRQ number if requesting
it failed.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@pengutronix.de>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi_s3c24xx: pin configuration updates

Add a pin configuration callback for the s3c24xx SPI driver, as there are
several options depending on the channel and the chip in use.

This is needed as the controller may not have been setup by the initial
bootloader and the fact that the SPI controller gets reset over
suspend/resume into slave mode but the GPIO function registers do not.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

spi: simplify spi_write_then_read()

Modify spi_write_then_read() to use one transfer.  This speeds up all
callers, and is a minor code shrink.

Signed-off-by: Vernon Sauder <Vernon.Sauder@gmail.com>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mpc52xx_psc_spi: remove code associated with !CONFIG_PPC_MERGE

Now that arch/ppc is gone we don't need CONFIG_PPC_MERGE anymore
remove the dead code associated with !CONFIG_PPC_MERGE.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Allow recursion in binfmt_script and binfmt_misc

binfmt_script and binfmt_misc disallow recursion to avoid stack overflow
using sh_bang and misc_bang.  It causes problem in some cases:

$ echo '#!/bin/ls' > /tmp/t0
$ echo '#!/tmp/t0' > /tmp/t1
$ echo '#!/tmp/t1' > /tmp/t2
$ chmod +x /tmp/t*
$ /tmp/t2
zsh: exec format error: /tmp/t2

Similar problem with binfmt_misc.

This patch introduces field 'recursion_depth' into struct linux_binprm to
track recursion level in binfmt_misc and binfmt_script.  If recursion
level more then BINPRM_MAX_RECURSION it generates -ENOEXEC.

[akpm@linux-foundation.org: make linux_binprm.recursion_depth a uint]
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Pavel Emelyanov <xemul@openvz.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>