ceph: return -ERANGE if virtual xattr value didn't fit in buffer

[ Upstream commit 3b421018f48c482bdc9650f894aa1747cf90e51d ]

The getxattr manpage states that we should return ERANGE if the
destination buffer size is too small to hold the value.
ceph_vxattrcb_layout does this internally, but we should be doing
this for all vxattrs.

Fix the only caller of getxattr_cb to check the returned size
against the buffer length and return -ERANGE if it doesn't fit.
Drop the same check in ceph_vxattrcb_layout and just rely on the
caller to handle it.

Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ceph: fix improper use of smp_mb__before_atomic()

[ Upstream commit 749607731e26dfb2558118038c40e9c0c80d23b5 ]

This barrier only applies to the read-modify-write operations; in
particular, it does not apply to the atomic64_set() primitive.

Replace the barrier with an smp_mb().

Fixes: fdd4e15838e59 ("ceph: rework dcache readdir")
Reported-by: "Paul E. McKenney" <paulmck@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrea Parri <andrea.parri@amarulasolutions.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

btrfs: fix minimum number of chunk errors for DUP

[ Upstream commit 0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ]

The list of profiles in btrfs_chunk_max_errors lists DUP as a profile
DUP able to tolerate 1 device missing. Though this profile is special
with 2 copies, it still needs the device, unlike the others.

Looking at the history of changes, thre's no clear reason why DUP is
there, functions were refactored and blocks of code merged to one
helper.

d20983b40e828 Btrfs: fix writing data into the seed filesystem
  - factor code to a helper

de11cc12df173 Btrfs: don't pre-allocate btrfs bio
  - unrelated change, DUP still in the list with max errors 1

a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations
  - introduced the max errors, leaves DUP and RAID1 in the same group

Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fs/adfs: super: fix use-after-free bug

[ Upstream commit 5808b14a1f52554de612fee85ef517199855e310 ]

Fix a use-after-free bug during filesystem initialisation, where we
access the disc record (which is stored in a buffer) after we have
released the buffer.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: rcar-dmac: Reject zero-length slave DMA requests

[ Upstream commit 78efb76ab4dfb8f74f290ae743f34162cd627f19 ]

While the .device_prep_slave_sg() callback rejects empty scatterlists,
it still accepts single-entry scatterlists with a zero-length segment.
These may happen if a driver calls dmaengine_prep_slave_single() with a
zero len parameter.  The corresponding DMA request will never complete,
leading to messages like:

    rcar-dmac e7300000.dma-controller: Channel Address Error happen

and DMA timeouts.

Although requesting a zero-length DMA request is a driver bug, rejecting
it early eases debugging.  Note that the .device_prep_dma_memcpy()
callback already rejects requests to copy zero bytes.

Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Analyzed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

MIPS: lantiq: Fix bitfield masking

[ Upstream commit ba1bc0fcdeaf3bf583c1517bd2e3e29cf223c969 ]

The modification of EXIN register doesn't clean the bitfield before
the writing of a new value. After a few modifications the bitfield would
accumulate only '1's.

Signed-off-by: Petr Cvek <petrcvekcz@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: hauke@hauke-m.de
Cc: john@phrozen.org
Cc: linux-mips@vger.kernel.org
Cc: openwrt-devel@lists.openwrt.org
Cc: pakahmar@hotmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

kernel/module.c: Only return -EEXIST for modules that have finished loading

[ Upstream commit 6e6de3dee51a439f76eb73c22ae2ffd2c9384712 ]

Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and
linux guests boot with repeated errors:

amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2)
amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)

The warnings occur because the module code erroneously returns -EEXIST
for modules that have failed to load and are in the process of being
removed from the module list.

module amd64_edac_mod has a dependency on module edac_mce_amd.  Using
modules.dep, systemd will load edac_mce_amd for every request of
amd64_edac_mod.  When the edac_mce_amd module loads, the module has
state MODULE_STATE_UNFORMED and once the module load fails and the state
becomes MODULE_STATE_GOING.  Another request for edac_mce_amd module
executes and add_unformed_module() will erroneously return -EEXIST even
though the previous instance of edac_mce_amd has MODULE_STATE_GOING.
Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which
fails because of unknown symbols from edac_mce_amd.

add_unformed_module() must wait to return for any case other than
MODULE_STATE_LIVE to prevent a race between multiple loads of
dependent modules.

Signed-off-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Barret Rhoden <brho@google.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ftrace: Enable trampoline when rec count returns back to one

[ Upstream commit a124692b698b00026a58d89831ceda2331b2e1d0 ]

Custom trampolines can only be enabled if there is only a single ops
attached to it. If there's only a single callback registered to a function,
and the ops has a trampoline registered for it, then we can call the
trampoline directly. This is very useful for improving the performance of
ftrace and livepatch.

If more than one callback is registered to a function, the general
trampoline is used, and the custom trampoline is not restored back to the
direct call even if all the other callbacks were unregistered and we are
back to one callback for the function.

To fix this, set FTRACE_FL_TRAMP flag if rec count is decremented
to one, and the ops that left has a trampoline.

Testing After this patch :

insmod livepatch_unshare_files.ko
cat /sys/kernel/debug/tracing/enabled_functions

unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

echo unshare_files > /sys/kernel/debug/tracing/set_ftrace_filter
echo function > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

unshare_files (2) R I ->ftrace_ops_list_func+0x0/0x150

echo nop > /sys/kernel/debug/tracing/current_tracer
cat /sys/kernel/debug/tracing/enabled_functions

unshare_files (1) R I tramp: 0xffffffffc0000000(klp_ftrace_handler+0x0/0xa0) ->ftrace_ops_assist_func+0x0/0xf0

Link: http://lkml.kernel.org/r/1556969979-111047-1-git-send-email-cj.chengjian@huawei.com
Signed-off-by: Cheng Jian <cj.chengjian@huawei.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: Mark that the rk3288 timer might stop in suspend

[ Upstream commit 8ef1ba39a9fa53d2205e633bc9b21840a275908e ]

This is similar to commit e6186820a745 ("arm64: dts: rockchip: Arch
counter doesn't tick in system suspend").  Specifically on the rk3288
it can be seen that the timer stops ticking in suspend if we end up
running through the "osc_disable" path in rk3288_slp_mode_set().  In
that path the 24 MHz clock will turn off and the timer stops.

To test this, I ran this on a Chrome OS filesystem:
  before=$(date); \
  suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \
  echo ${before}; date

...and I found that unless I plug in a device that requests USB wakeup
to be active that the two calls to "date" would show that fewer than
30 seconds passed.

NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't
supported yet on upstream Linux so this was tested on a downstream
kernel.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: Make rk3288-veyron-mickey's emmc work again

[ Upstream commit 99fa066710f75f18f4d9a5bc5f6a711968a581d5 ]

When I try to boot rk3288-veyron-mickey I totally fail to make the
eMMC work.  Specifically my logs (on Chrome OS 4.19):

  mmc_host mmc1: card is non-removable.
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: new high speed MMC card at address 0001
  mmcblk1: mmc1:0001 HAG2e 14.7 GiB
  mmcblk1boot0: mmc1:0001 HAG2e partition 1 4.00 MiB
  mmcblk1boot1: mmc1:0001 HAG2e partition 2 4.00 MiB
  mmcblk1rpmb: mmc1:0001 HAG2e partition 3 4.00 MiB, chardev (243:0)
  mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0)
  mmc1: switch to bus width 8 failed
  mmc1: switch to bus width 4 failed
  mmc1: tried to HW reset card, got error -110
  mmcblk1: error -110 requesting status
  mmcblk1: recovery failed!
  print_req_error: I/O error, dev mmcblk1, sector 0
  ...

When I remove the '/delete-property/mmc-hs200-1_8v' then everything is
hunky dory.

That line comes from the original submission of the mickey dts
upstream, so presumably at the time the HS200 was failing and just
enumerating things as a high speed device was fine.  ...or maybe it's
just that some mickey devices work when enumerating at "high speed",
just not mine?

In any case, hs200 seems good now.  Let's turn it on.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: rockchip: Make rk3288-veyron-minnie run at hs200

[ Upstream commit 1c0479023412ab7834f2e98b796eb0d8c627cd62 ]

As some point hs200 was failing on rk3288-veyron-minnie.  See commit
984926781122 ("ARM: dts: rockchip: temporarily remove emmc hs200 speed
from rk3288 minnie").  Although I didn't track down exactly when it
started working, it seems to work OK now, so let's turn it back on.

To test this, I booted from SD card and then used this script to
stress the enumeration process after fixing a memory leak [1]:
  cd /sys/bus/platform/drivers/dwmmc_rockchip
  for i in $(seq 1 3000); do
    echo "========================" $i
    echo ff0f0000.dwmmc > unbind
    sleep .5
    echo ff0f0000.dwmmc > bind
    while true; do
      if [ -e /dev/mmcblk2 ]; then
        break;
      fi
      sleep .1
    done
  done

It worked fine.

[1] https://lkml.kernel.org/r/20190503233526.226272-1-dianders@chromium.org

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: riscpc: fix DMA

[ Upstream commit ffd9a1ba9fdb7f2bd1d1ad9b9243d34e96756ba2 ]

DMA got broken a while back in two different ways:
1) a change in the behaviour of disable_irq() to wait for the interrupt
   to finish executing causes us to deadlock at the end of DMA.
2) a change to avoid modifying the scatterlist left the first transfer
   uninitialised.

DMA is only used with expansion cards, so has gone unnoticed.

Fixes: fa4e99899932 ("[ARM] dma: RiscPC: don't modify DMA SG entries")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Linux 4.9.187

ceph: hold i_ceph_lock when removing caps for freeing inode

commit d6e47819721ae2d9d090058ad5570a66f3c42e39 upstream.

ceph_d_revalidate(, LOOKUP_RCU) may call __ceph_caps_issued_mask()
on a freeing inode.

Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/pps/pps.c: clear offset flags in PPS_SETPARAMS ioctl

commit 5515e9a6273b8c02034466bcbd717ac9f53dab99 upstream.

The PPS assert/clear offset corrections are set by the PPS_SETPARAMS
ioctl in the pps_ktime structs, which also contain flags.  The flags are
not initialized by applications (using the timepps.h header) and they
are not used by the kernel for anything except returning them back in
the PPS_GETPARAMS ioctl.

Set the flags to zero to make it clear they are unused and avoid leaking
uninitialized data of the PPS_SETPARAMS caller to other applications
that have a read access to the PPS device.

Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rodolfo Giometti <giometti@enneenne.com>
Cc: Greg KH <greg@kroah.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sched/fair: Don't free p->numa_faults with concurrent readers

commit 16d51a590a8ce3befb1308e0e7ab77f3b661af33 upstream.

When going through execve(), zero out the NUMA fault statistics instead of
freeing them.

During execve, the task is reachable through procfs and the scheduler. A
concurrent /proc/*/sched reader can read data from a freed ->numa_faults
allocation (confirmed by KASAN) and write it back to userspace.
I believe that it would also be possible for a use-after-free read to occur
through a race between a NUMA fault and execve(): task_numa_fault() can
lead to task_numa_compare(), which invokes task_weight() on the currently
running task of a different CPU.

Another way to fix this would be to make ->numa_faults RCU-managed or add
extra locking, but it seems easier to wipe the NUMA fault statistics on
execve.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 82727018b0d3 ("sched/numa: Call task_numa_free() from do_execve()")
Link: https://lkml.kernel.org/r/20190716152047.14424-1-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Bluetooth: hci_uart: check for missing tty operations

commit b36a1552d7319bbfd5cf7f08726c23c5c66d4f73 upstream.

Certain ttys operations (pty_unix98_ops) lack tiocmget() and tiocmset()
functions which are called by the certain HCI UART protocols (hci_ath,
hci_bcm, hci_intel, hci_mrvl, hci_qca) via hci_uart_set_flow_control()
or directly. This leads to an execution at NULL and can be triggered by
an unprivileged user. Fix this by adding a helper function and a check
for the missing tty operations in the protocols code.

This fixes CVE-2019-10207. The Fixes: lines list commits where calls to
tiocm[gs]et() or hci_uart_set_flow_control() were added to the HCI UART
protocols.

Link: https://syzkaller.appspot.com/bug?id=1b42faa2848963564a5b1b7f8c837ea7b55ffa50
Reported-by: syzbot+79337b501d6aa974d0f6@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # v2.6.36+
Fixes: b3190df62861 ("Bluetooth: Support for Atheros AR300x serial chip")
Fixes: 118612fb9165 ("Bluetooth: hci_bcm: Add suspend/resume PM functions")
Fixes: ff2895592f0f ("Bluetooth: hci_intel: Add Intel baudrate configuration support")
Fixes: 162f812f23ba ("Bluetooth: hci_uart: Add Marvell support")
Fixes: fa9ad876b8e0 ("Bluetooth: hci_qca: Add support for Qualcomm Bluetooth chip wcn3990")
Signed-off-by: Vladis Dronov <vdronov@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Reviewed-by: Yu-Chen, Cho <acho@suse.com>
Tested-by: Yu-Chen, Cho <acho@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: radio-raremono: change devm_k*alloc to k*alloc

commit c666355e60ddb4748ead3bdd983e3f7f2224aaf0 upstream.

Change devm_k*alloc to k*alloc to manually allocate memory

The manual allocation and freeing of memory is necessary because when
the USB radio is disconnected, the memory associated with devm_k*alloc
is freed. Meaning if we still have unresolved references to the radio
device, then we get use-after-free errors.

This patch fixes this by manually allocating memory, and freeing it in
the v4l2.release callback that gets called when the last radio device
exits.

Reported-and-tested-by: syzbot+a4387f5b6b799f6becbf@syzkaller.appspotmail.com
Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil-cisco@xs4all.nl: cleaned up two small checkpatch.pl warnings]
[hverkuil-cisco@xs4all.nl: prefix subject with driver name]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: cpia2_usb: first wake up, then free in disconnect

commit eff73de2b1600ad8230692f00bc0ab49b166512a upstream.

Kasan reported a use after free in cpia2_usb_disconnect()
It first freed everything and then woke up those waiting.
The reverse order is correct.

Fixes: 6c493f8b28c67 ("[media] cpia2: major overhaul to get it in a working state again")

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-by: syzbot+0c90fc937c84f97d0aa6@syzkaller.appspotmail.com
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: au0828: fix null dereference in error path

commit 6d0d1ff9ff21fbb06b867c13a1d41ce8ddcd8230 upstream.

au0828_usb_disconnect() gets the au0828_dev struct via usb_get_intfdata,
so it needs to set up for the error paths.

Reported-by: syzbot+357d86bcb4cca1a2f572@syzkaller.appspotmail.com
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ISDN: hfcsusb: checking idx of ep configuration

commit f384e62a82ba5d85408405fdd6aeff89354deaa9 upstream.

The syzbot test with random endpoint address which made the idx is
overflow in the table of endpoint configuations.

this adds the checking for fixing the error report from
syzbot

KASAN: stack-out-of-bounds Read in hfcsusb_probe [1]
The patch tested by syzbot [2]

Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com
[1]:
https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb913522
[2]:
https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: compat: Provide definition for COMPAT_SIGMINSTKSZ

commit 24951465cbd279f60b1fdc2421b3694405bcff42 upstream.

arch/arm/ defines a SIGMINSTKSZ of 2k, so we should use the same value
for compat tasks.

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Reported-by: Steve McIntyre <steve.mcintyre@arm.com>
Tested-by: Steve McIntyre <93sam@debian.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: qup: fixed releasing dma without flush operation completion

commit 7239872fb3400b21a8f5547257f9f86455867bd6 upstream.

The QUP BSLP BAM generates the following error sometimes if the
current I2C DMA transfer fails and the flush operation has been
scheduled

    “bam-dma-engine 7884000.dma: Cannot free busy channel”

If any I2C error comes during BAM DMA transfer, then the QUP I2C
interrupt will be generated and the flush operation will be
carried out to make I2C consume all scheduled DMA transfer.
Currently, the same completion structure is being used for BAM
transfer which has already completed without reinit. It will make
flush operation wait_for_completion_timeout completed immediately
and will proceed for freeing the DMA resources where the
descriptors are still in process.

Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Acked-by: Sricharan R <sricharan@codeaurora.org>
Reviewed-by: Austin Christ <austinwc@codeaurora.org>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm64: dts: marvell: Fix A37xx UART0 register size

commit c737abc193d16e62e23e2fb585b8b7398ab380d8 upstream.

Armada-37xx UART0 registers are 0x200 bytes wide. Right next to them are
the UART1 registers that should not be declared in this node.

Update the example in DT bindings document accordingly.

Signed-off-by: allen yan <yanwei@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: reset sk_send_head in tcp_write_queue_purge

[ Upstream commit dbbf2d1e4077bab0c65ece2765d3fc69cf7d610f ]

tcp_write_queue_purge clears all the SKBs in the write queue
but does not reset the sk_send_head. As a result, we can have
a NULL pointer dereference anywhere that we use tcp_send_head
instead of the tcp_write_queue_tail.

For example, after a27fd7a8ed38 (tcp: purge write queue upon RST),
we can purge the write queue on RST. Prior to
75c119afe14f (tcp: implement rb-tree based retransmit queue),
tcp_push will only check tcp_send_head and then accesses
tcp_write_queue_tail to send the actual SKB. As a result, it will
dereference a NULL pointer.

This has been reported twice for 4.14 where we don't have
75c119afe14f:

By Timofey Titovets:

[  422.081094] BUG: unable to handle kernel NULL pointer dereference
at 0000000000000038
[  422.081254] IP: tcp_push+0x42/0x110
[  422.081314] PGD 0 P4D 0
[  422.081364] Oops: 0002 [#1] SMP PTI

By Yongjian Xu:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000038
IP: tcp_push+0x48/0x120
PGD 80000007ff77b067 P4D 80000007ff77b067 PUD 7fd989067 PMD 0
Oops: 0002 [#18] SMP PTI
Modules linked in: tcp_diag inet_diag tcp_bbr sch_fq iTCO_wdt
iTCO_vendor_support pcspkr ixgbe mdio i2c_i801 lpc_ich joydev input_leds shpchp
e1000e igb dca ptp pps_core hwmon mei_me mei ipmi_si ipmi_msghandler sg ses
scsi_transport_sas enclosure ext4 jbd2 mbcache sd_mod ahci libahci megaraid_sas
wmi ast ttm dm_mirror dm_region_hash dm_log dm_mod dax
CPU: 6 PID: 14156 Comm: [ET_NET 6] Tainted: G D 4.14.26-1.el6.x86_64 #1
Hardware name: LENOVO ThinkServer RD440 /ThinkServer RD440, BIOS A0TS80A
09/22/2014
task: ffff8807d78d8140 task.stack: ffffc9000e944000
RIP: 0010:tcp_push+0x48/0x120
RSP: 0018:ffffc9000e947a88 EFLAGS: 00010246
RAX: 00000000000005b4 RBX: ffff880f7cce9c00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffff8807d00f5000
RBP: ffffc9000e947aa8 R08: 0000000000001c84 R09: 0000000000000000
R10: ffff8807d00f5158 R11: 0000000000000000 R12: ffff8807d00f5000
R13: 0000000000000020 R14: 00000000000256d4 R15: 0000000000000000
FS: 00007f5916de9700(0000) GS:ffff88107fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000038 CR3: 00000007f8226004 CR4: 00000000001606e0
Call Trace:
tcp_sendmsg_locked+0x33d/0xe50
tcp_sendmsg+0x37/0x60
inet_sendmsg+0x39/0xc0
sock_sendmsg+0x49/0x60
sock_write_iter+0xb6/0x100
do_iter_readv_writev+0xec/0x130
? rw_verify_area+0x49/0xb0
do_iter_write+0x97/0xd0
vfs_writev+0x7e/0xe0
? __wake_up_common_lock+0x80/0xa0
? __fget_light+0x2c/0x70
? __do_page_fault+0x1e7/0x530
do_writev+0x60/0xf0
? inet_shutdown+0xac/0x110
SyS_writev+0x10/0x20
do_syscall_64+0x6f/0x140
? prepare_exit_to_usermode+0x8b/0xa0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x3135ce0c57
RSP: 002b:00007f5916de4b00 EFLAGS: 00000293 ORIG_RAX: 0000000000000014
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 0000003135ce0c57
RDX: 0000000000000002 RSI: 00007f5916de4b90 RDI: 000000000000606f
RBP: 0000000000000000 R08: 0000000000000000 R09: 00007f5916de8c38
R10: 0000000000000000 R11: 0000000000000293 R12: 00000000000464cc
R13: 00007f5916de8c30 R14: 00007f58d8bef080 R15: 0000000000000002
Code: 48 8b 97 60 01 00 00 4c 8d 97 58 01 00 00 41 b9 00 00 00 00 41 89 f3 4c 39
d2 49 0f 44 d1 41 81 e3 00 80 00 00 0f 85 b0 00 00 00 <80> 4a 38 08 44 8b 8f 74
06 00 00 44 89 8f 7c 06 00 00 83 e6 01
RIP: tcp_push+0x48/0x120 RSP: ffffc9000e947a88
CR2: 0000000000000038
---[ end trace 8d545c2e93515549 ]---

There is other scenario which found in stable 4.4:
Allocated:
 [<ffffffff82f380a6>] __alloc_skb+0xe6/0x600 net/core/skbuff.c:218
 [<ffffffff832466c3>] alloc_skb_fclone include/linux/skbuff.h:856 [inline]
 [<ffffffff832466c3>] sk_stream_alloc_skb+0xa3/0x5d0 net/ipv4/tcp.c:833
 [<ffffffff83249164>] tcp_sendmsg+0xd34/0x2b00 net/ipv4/tcp.c:1178
 [<ffffffff83300ef3>] inet_sendmsg+0x203/0x4d0 net/ipv4/af_inet.c:755
Freed:
 [<ffffffff82f372fd>] __kfree_skb+0x1d/0x20 net/core/skbuff.c:676
 [<ffffffff83288834>] sk_wmem_free_skb include/net/sock.h:1447 [inline]
 [<ffffffff83288834>] tcp_write_queue_purge include/net/tcp.h:1460 [inline]
 [<ffffffff83288834>] tcp_connect_init net/ipv4/tcp_output.c:3122 [inline]
 [<ffffffff83288834>] tcp_connect+0xb24/0x30c0 net/ipv4/tcp_output.c:3261
 [<ffffffff8329b991>] tcp_v4_connect+0xf31/0x1890 net/ipv4/tcp_ipv4.c:246

BUG: KASAN: use-after-free in tcp_skb_pcount include/net/tcp.h:796 [inline]
BUG: KASAN: use-after-free in tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline]
BUG: KASAN: use-after-free in tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056
 [<ffffffff81515cd5>] kasan_report.cold.7+0x175/0x2f7 mm/kasan/report.c:408
 [<ffffffff814f9784>] __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:427
 [<ffffffff83286582>] tcp_skb_pcount include/net/tcp.h:796 [inline]
 [<ffffffff83286582>] tcp_init_tso_segs net/ipv4/tcp_output.c:1619 [inline]
 [<ffffffff83286582>] tcp_write_xmit+0x3fc2/0x4cb0 net/ipv4/tcp_output.c:2056
 [<ffffffff83287a40>] __tcp_push_pending_frames+0xa0/0x290 net/ipv4/tcp_output.c:2307

stable 4.4 and stable 4.9 don't have the commit abb4a8b870b5 ("tcp: purge write queue upon RST")
which is referred in dbbf2d1e4077,
in tcp_connect_init, it calls tcp_write_queue_purge, and does not reset sk_send_head, then UAF.

stable 4.14 have the commit abb4a8b870b5 ("tcp: purge write queue upon RST"),
in tcp_reset, it calls tcp_write_queue_purge(sk), and does not reset sk_send_head, then UAF.

So this patch can be used to fix stable 4.4 and 4.9.

Fixes: a27fd7a8ed38 (tcp: purge write queue upon RST)
Reported-by: Timofey Titovets <nefelim4ag@gmail.com>
Reported-by: Yongjian Xu <yongjianchn@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Tested-by: Yongjian Xu <yongjianchn@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ipv6: check sk sk_type and protocol early in ip_mroute_set/getsockopt

[ Upstream commit 99253eb750fda6a644d5188fb26c43bad8d5a745 ]

Commit 5e1859fbcc3c ("ipv4: ipmr: various fixes and cleanups") fixed
the issue for ipv4 ipmr:

  ip_mroute_setsockopt() & ip_mroute_getsockopt() should not
  access/set raw_sk(sk)->ipmr_table before making sure the socket
  is a raw socket, and protocol is IGMP

The same fix should be done for ipv6 ipmr as well.

This patch can fix the panic caused by overwriting the same offset
as ipmr_table as in raw_sk(sk) when accessing other type's socket
by ip_mroute_setsockopt().

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

access: avoid the RCU grace period for the temporary subjective credentials

commit d7852fbd0f0423937fa287a598bfde188bb68c22 upstream.

It turns out that 'access()' (and 'faccessat()') can cause a lot of RCU
work because it installs a temporary credential that gets allocated and
freed for each system call.

The allocation and freeing overhead is mostly benign, but because
credentials can be accessed under the RCU read lock, the freeing
involves a RCU grace period.

Which is not a huge deal normally, but if you have a lot of access()
calls, this causes a fair amount of seconday damage: instead of having a
nice alloc/free patterns that hits in hot per-CPU slab caches, you have
all those delayed free's, and on big machines with hundreds of cores,
the RCU overhead can end up being enormous.

But it turns out that all of this is entirely unnecessary.  Exactly
because access() only installs the credential as the thread-local
subjective credential, the temporary cred pointer doesn't actually need
to be RCU free'd at all.  Once we're done using it, we can just free it
synchronously and avoid all the RCU overhead.

So add a 'non_rcu' flag to 'struct cred', which can be set by users that
know they only use it in non-RCU context (there are other potential
users for this).  We can make it a union with the rcu freeing list head
that we need for the RCU case, so this doesn't need any extra storage.

Note that this also makes 'get_current_cred()' clear the new non_rcu
flag, in case we have filesystems that take a long-term reference to the
cred and then expect the RCU delayed freeing afterwards.  It's not
entirely clear that this is required, but it makes for clear semantics:
the subjective cred remains non-RCU as long as you only access it
synchronously using the thread-local accessors, but you _can_ use it as
a generic cred if you want to.

It is possible that we should just remove the whole RCU markings for
->cred entirely.  Only ->real_cred is really supposed to be accessed
through RCU, and the long-term cred copies that nfs uses might want to
explicitly re-enable RCU freeing if required, rather than have
get_current_cred() do it implicitly.

But this is a "minimal semantic changes" change for the immediate
problem.

Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Eric Dumazet <edumazet@google.com>
Acked-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Jan Glauber <jglauber@marvell.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Jayachandran Chandrasekharan Nair <jnair@marvell.com>
Cc: Greg KH <greg@kroah.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/tm: Fix oops on sigreturn on systems without TM

commit f16d80b75a096c52354c6e0a574993f3b0dfbdfe upstream.

On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:

  Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ffa4 #69
  NIP:  c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
  REGS: c00000003fffbd70 TRAP: 0700   Not tainted  (5.2.0-11045-g7142b497d8)
  MSR:  8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]>  CR: 42004242  XER: 00000000
  CFAR: c0000000000022e0 IRQMASK: 0
  GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
  GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
  GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
  GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
  GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
  GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
  NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
  LR [00007fffb2d67e48] 0x7fffb2d67e48
  Call Trace:
  Instruction dump:
  e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
  e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18

The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.

This means any local user can crash the system.

Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.

Found with sigfuz kernel selftest on P9.

This fixes CVE-2019-13648.

Fixes: 2b0a576d15e0 ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: Praveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda - Add a conexant codec entry to let mute led work

commit 3f8809499bf02ef7874254c5e23fc764a47a21a0 upstream.

This conexant codec isn't in the supported codec list yet, the hda
generic driver can drive this codec well, but on a Lenovo machine
with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI
to make the leds work. After adding this codec to the list, the
driver patch_conexant.c will apply THINKPAD_ACPI to this machine.

Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1

commit 70256b42caaf3e13c2932c2be7903a73fbe8bb8b upstream.

Commit 7b9584fa1c0b ("staging: line6: Move altsetting to properties")
set a wrong altsetting for LINE6_PODHD500_1 during refactoring.

Set the correct altsetting number to fix the issue.

BugLink: https://bugs.launchpad.net/bugs/1790595
Fixes: 7b9584fa1c0b ("staging: line6: Move altsetting to properties")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

hpet: Fix division by zero in hpet_time_div()

commit 0c7d37f4d9b8446956e97b7c5e61173cdb7c8522 upstream.

The base value in do_div() called by hpet_time_div() is truncated from
unsigned long to uint32_t, resulting in a divide-by-zero exception.

UBSAN: Undefined behaviour in ../drivers/char/hpet.c:572:2
division by zero
CPU: 1 PID: 23682 Comm: syz-executor.3 Not tainted 4.4.184.x86_64+ #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014
 0000000000000000 b573382df1853d00 ffff8800a3287b98 ffffffff81ad7561
 ffff8800a3287c00 ffffffff838b35b0 ffffffff838b3860 ffff8800a3287c20
 0000000000000000 ffff8800a3287bb0 ffffffff81b8f25e ffffffff838b35a0
Call Trace:
 [<ffffffff81ad7561>] __dump_stack lib/dump_stack.c:15 [inline]
 [<ffffffff81ad7561>] dump_stack+0xc1/0x120 lib/dump_stack.c:51
 [<ffffffff81b8f25e>] ubsan_epilogue+0x12/0x8d lib/ubsan.c:166
 [<ffffffff81b900cb>] __ubsan_handle_divrem_overflow+0x282/0x2c8 lib/ubsan.c:262
 [<ffffffff823560dd>] hpet_time_div drivers/char/hpet.c:572 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common drivers/char/hpet.c:663 [inline]
 [<ffffffff823560dd>] hpet_ioctl_common.cold+0xa8/0xad drivers/char/hpet.c:577
 [<ffffffff81e63d56>] hpet_ioctl+0xc6/0x180 drivers/char/hpet.c:676
 [<ffffffff81711590>] vfs_ioctl fs/ioctl.c:43 [inline]
 [<ffffffff81711590>] file_ioctl fs/ioctl.c:470 [inline]
 [<ffffffff81711590>] do_vfs_ioctl+0x6e0/0xf70 fs/ioctl.c:605
 [<ffffffff81711eb4>] SYSC_ioctl fs/ioctl.c:622 [inline]
 [<ffffffff81711eb4>] SyS_ioctl+0x94/0xc0 fs/ioctl.c:613
 [<ffffffff82846003>] tracesys_phase2+0x90/0x95

The main C reproducer autogenerated by syzkaller,

  syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0);
  memcpy((void*)0x20000100, "/dev/hpet\000", 10);
  syscall(__NR_openat, 0xffffffffffffff9c, 0x20000100, 0, 0);
  syscall(__NR_ioctl, r[0], 0x40086806, 0x40000000000000);

Fix it by using div64_ul().

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Zhang HongJun <zhanghongjun2@huawei.com>
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190711132757.130092-1-wangkefeng.wang@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/speculation/mds: Apply more accurate check on hypervisor platform

commit 517c3ba00916383af6411aec99442c307c23f684 upstream.

X86_HYPER_NATIVE isn't accurate for checking if running on native platform,
e.g. CONFIG_HYPERVISOR_GUEST isn't set or "nopv" is enabled.

Checking the CPU feature bit X86_FEATURE_HYPERVISOR to determine if it's
running on native platform is more accurate.

This still doesn't cover the platforms on which X86_FEATURE_HYPERVISOR is
unsupported, e.g. VMware, but there is nothing which can be done about this
scenario.

Fixes: 8a4b06d391b0 ("x86/speculation/mds: Add sysfs reporting for MDS")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/1564022349-17338-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

x86/sysfb_efi: Add quirks for some devices with swapped width and height

commit d02f1aa39189e0619c3525d5cd03254e61bf606a upstream.

Some Lenovo 2-in-1s with a detachable keyboard have a portrait screen but
advertise a landscape resolution and pitch, resulting in a messed up
display if the kernel tries to show anything on the efifb (because of the
wrong pitch).

Fix this by adding a new DMI match table for devices which need to have
their width and height swapped.

At first it was tried to use the existing table for overriding some of the
efifb parameters, but some of the affected devices have variants with
different LCD resolutions which will not work with hardcoded override
values.

Reference: https://bugzilla.redhat.com/show_bug.cgi?id=1730783
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20190721152418.11644-1-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: pci-quirks: Correct AMD PLL quirk detection

commit f3dccdaade4118070a3a47bef6b18321431f9ac6 upstream.

The AMD PLL USB quirk is incorrectly enabled on newer Ryzen
chipsets. The logic in usb_amd_find_chipset_info currently checks
for unaffected chipsets rather than affected ones. This broke
once a new chipset was added in e788787ef. It makes more sense
to reverse the logic so it won't need to be updated as new
chipsets are added. Note that the core of the workaround in
usb_amd_quirk_pll does correctly check the chipset.

Signed-off-by: Ryan Kennedy <ryan5544@gmail.com>
Fixes: e788787ef4f9 ("usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume")
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20190704153529.9429-2-ryan5544@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: wusbcore: fix unbalanced get/put cluster_id

commit f90bf1ece48a736097ea224430578fe586a9544c upstream.

syzboot reported that
https://syzkaller.appspot.com/bug?extid=fd2bd7df88c606eea4ef

There is not consitency parameter in cluste_id_get/put calling.
In case of getting the id with result is failure, the wusbhc->cluster_id
will not be updated and this can not be used for wusb_cluster_id_put().

Tested report
https://groups.google.com/d/msg/syzkaller-bugs/0znZopp3-9k/oxOrhLkLEgAJ

Reproduce and gdb got the details:

139 addr = wusb_cluster_id_get();
(gdb) n
140 if (addr == 0)
(gdb) print addr
$1 = 254 '\376'
(gdb) n
142 result = __hwahc_set_cluster_id(hwahc, addr);
(gdb) print result
$2 = -71
(gdb) break wusb_cluster_id_put
Breakpoint 3 at 0xffffffff836e3f20: file drivers/usb/wusbcore/wusbhc.c, line 384.
(gdb) s
Thread 2 hit Breakpoint 3, wusb_cluster_id_put (id=0 '\000') at drivers/usb/wusbcore/wusbhc.c:384
384 id = 0xff - id;
(gdb) n
385 BUG_ON(id >= CLUSTER_IDS);
(gdb) print id
$3 = 255 '\377'

Reported-by: syzbot+fd2bd7df88c606eea4ef@syzkaller.appspotmail.com
Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20190724020601.15257-1-tranmanphong@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

locking/lockdep: Hide unused 'class' variable

[ Upstream commit 68037aa78208f34bda4e5cd76c357f718b838cbb ]

The usage is now hidden in an #ifdef, so we need to move
the variable itself in there as well to avoid this warning:

  kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yuyang Du <duyuyang@gmail.com>
Cc: frederic@kernel.org
Fixes: 68d41d8c94a3 ("locking/lockdep: Fix lock used or unused stats error")
Link: https://lkml.kernel.org/r/20190715092809.736834-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

locking/lockdep: Fix lock used or unused stats error

[ Upstream commit 68d41d8c94a31dfb8233ab90b9baf41a2ed2da68 ]

The stats variable nr_unused_locks is incremented every time a new lock
class is register and decremented when the lock is first used in
__lock_acquire(). And after all, it is shown and checked in lockdep_stats.

However, under configurations that either CONFIG_TRACE_IRQFLAGS or
CONFIG_PROVE_LOCKING is not defined:

The commit:

  091806515124b20 ("locking/lockdep: Consolidate lock usage bit initialization")

missed marking the LOCK_USED flag at IRQ usage initialization because
as mark_usage() is not called. And the commit:

  886532aee3cd42d ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")

further made mark_lock() not defined such that the LOCK_USED cannot be
marked at all when the lock is first acquired.

As a result, we fix this by not showing and checking the stats under such
configurations for lockdep_stats.

Reported-by: Qian Cai <cai@lca.pw>
Signed-off-by: Yuyang Du <duyuyang@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: arnd@arndb.de
Cc: frederic@kernel.org
Link: https://lkml.kernel.org/r/20190709101522.9117-1-duyuyang@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/mmu_notifier: use hlist_add_head_rcu()

[ Upstream commit 543bdb2d825fe2400d6e951f1786d92139a16931 ]

Make mmu_notifier_register() safer by issuing a memory barrier before
registering a new notifier.  This fixes a theoretical bug on weakly
ordered CPUs.  For example, take this simplified use of notifiers by a
driver:

my_struct->mn.ops = &my_ops; /* (1) */
mmu_notifier_register(&my_struct->mn, mm)
...
hlist_add_head(&mn->hlist, &mm->mmu_notifiers); /* (2) */
...

Once mmu_notifier_register() releases the mm locks, another thread can
invalidate a range:

mmu_notifier_invalidate_range()
...
hlist_for_each_entry_rcu(mn, &mm->mmu_notifiers, hlist) {
if (mn->ops->invalidate_range)

The read side relies on the data dependency between mn and ops to ensure
that the pointer is properly initialized.  But the write side doesn't have
any dependency between (1) and (2), so they could be reordered and the
readers could dereference an invalid mn->ops.  mmu_notifier_register()
does take all the mm locks before adding to the hlist, but those have
acquire semantics which isn't sufficient.

By calling hlist_add_head_rcu() instead of hlist_add_head() we update the
hlist using a store-release, ensuring that readers see prior
initialization of my_struct.  This situation is better illustated by
litmus test MP+onceassign+derefonce.

Link: http://lkml.kernel.org/r/20190502133532.24981-1-jean-philippe.brucker@arm.com
Fixes: cddb8a5c14aa ("mmu-notifiers: core")
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

9p: pass the correct prototype to read_cache_page

[ Upstream commit f053cbd4366051d7eb6ba1b8d529d20f719c2963 ]

Fix the callback 9p passes to read_cache_page to actually have the
proper type expected.  Casting around function pointers can easily
hide typing bugs, and defeats control flow protection.

Link: http://lkml.kernel.org/r/20190520055731.24538-5-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mm/kmemleak.c: fix check for softirq context

[ Upstream commit 6ef9056952532c3b746de46aa10d45b4d7797bd8 ]

in_softirq() is a wrong predicate to check if we are in a softirq
context.  It also returns true if we have BH disabled, so objects are
falsely stamped with "softirq" comm.  The correct predicate is
in_serving_softirq().

If user does cat from /sys/kernel/debug/kmemleak previously they would
see this, which is clearly wrong, this is system call context (see the
comm):

unreferenced object 0xffff88805bd661c0 (size 64):
  comm "softirq", pid 0, jiffies 4294942959 (age 12.400s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 ff ff ff ff 00 00 00 00  ................
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<0000000007dcb30c>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<0000000007dcb30c>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<0000000007dcb30c>] slab_alloc mm/slab.c:3326 [inline]
    [<0000000007dcb30c>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<00000000969722b7>] kmalloc include/linux/slab.h:547 [inline]
    [<00000000969722b7>] kzalloc include/linux/slab.h:742 [inline]
    [<00000000969722b7>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<00000000969722b7>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<00000000a4134b5f>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000d20248ad>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<000000003d367be7>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<000000003c7c76af>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<000000000c1aeb23>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<000000000157b92b>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000a9f3d058>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000a9f3d058>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000a9f3d058>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<000000001b8da885>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000ba770c62>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

now they will see this:

unreferenced object 0xffff88805413c800 (size 64):
  comm "syz-executor.4", pid 8960, jiffies 4294994003 (age 14.350s)
  hex dump (first 32 bytes):
    00 7a 8a 57 80 88 ff ff e0 00 00 01 00 00 00 00  .z.W............
    00 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00  ................
  backtrace:
    [<00000000c5d3be64>] kmemleak_alloc_recursive include/linux/kmemleak.h:55 [inline]
    [<00000000c5d3be64>] slab_post_alloc_hook mm/slab.h:439 [inline]
    [<00000000c5d3be64>] slab_alloc mm/slab.c:3326 [inline]
    [<00000000c5d3be64>] kmem_cache_alloc_trace+0x13d/0x280 mm/slab.c:3553
    [<0000000023865be2>] kmalloc include/linux/slab.h:547 [inline]
    [<0000000023865be2>] kzalloc include/linux/slab.h:742 [inline]
    [<0000000023865be2>] ip_mc_add1_src net/ipv4/igmp.c:1961 [inline]
    [<0000000023865be2>] ip_mc_add_src+0x36b/0x400 net/ipv4/igmp.c:2085
    [<000000003029a9d4>] ip_mc_msfilter+0x22d/0x310 net/ipv4/igmp.c:2475
    [<00000000ccd0a87c>] do_ip_setsockopt.isra.0+0x19fe/0x1c00 net/ipv4/ip_sockglue.c:957
    [<00000000a85a3785>] ip_setsockopt+0x3b/0xb0 net/ipv4/ip_sockglue.c:1246
    [<00000000ec13c18d>] udp_setsockopt+0x4e/0x90 net/ipv4/udp.c:2616
    [<0000000052d748e3>] sock_common_setsockopt+0x3e/0x50 net/core/sock.c:3130
    [<00000000512f1014>] __sys_setsockopt+0x9e/0x120 net/socket.c:2078
    [<00000000181758bc>] __do_sys_setsockopt net/socket.c:2089 [inline]
    [<00000000181758bc>] __se_sys_setsockopt net/socket.c:2086 [inline]
    [<00000000181758bc>] __x64_sys_setsockopt+0x26/0x30 net/socket.c:2086
    [<00000000d4b73623>] do_syscall_64+0x7c/0x1a0 arch/x86/entry/common.c:301
    [<00000000c1098bec>] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Link: http://lkml.kernel.org/r/20190517171507.96046-1-dvyukov@gmail.com
Signed-off-by: Dmitry Vyukov <dvyukov@google.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

sh: prevent warnings when using iounmap

[ Upstream commit 733f0025f0fb43e382b84db0930ae502099b7e62 ]

When building drm/exynos for sh, as part of an allmodconfig build, the
following warning triggered:

  exynos7_drm_decon.c: In function `decon_remove':
  exynos7_drm_decon.c:769:24: warning: unused variable `ctx'
    struct decon_context *ctx = dev_get_drvdata(&pdev->dev);

The ctx variable is only used as argument to iounmap().

In sh - allmodconfig CONFIG_MMU is not defined
so it ended up in:

\#define __iounmap(addr) do { } while (0)
\#define iounmap __iounmap

Fix the warning by introducing a static inline function for iounmap.

This is similar to several other architectures.

Link: http://lkml.kernel.org/r/20190622114208.24427-1-sam@ravnborg.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Rich Felker <dalias@libc.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/eeh: Handle hugepages in ioremap space

[ Upstream commit 33439620680be5225c1b8806579a291e0d761ca0 ]

In commit 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap
space") support for using hugepages in the vmalloc and ioremap areas was
enabled for radix. Unfortunately this broke EEH MMIO error checking.

Detection works by inserting a hook which checks the results of the
ioreadXX() set of functions.  When a read returns a 0xFFs response we
need to check for an error which we do by mapping the (virtual) MMIO
address back to a physical address, then mapping physical address to a
PCI device via an interval tree.

When translating virt -> phys we currently assume the ioremap space is
only populated by PAGE_SIZE mappings. If a hugepage mapping is found we
emit a WARN_ON(), but otherwise handles the check as though a normal
page was found. In pathalogical cases such as copying a buffer
containing a lot of 0xFFs from BAR memory this can result in the system
not booting because it's too busy printing WARN_ON()s.

There's no real reason to assume huge pages can't be present and we're
prefectly capable of handling them, so do that.

Fixes: 4a7b06c157a2 ("powerpc/eeh: Handle hugepages in ioremap space")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710150517.27114-1-oohall@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

mailbox: handle failed named mailbox channel request

[ Upstream commit 25777e5784a7b417967460d4fcf9660d05a0c320 ]

Previously, if mbox_request_channel_byname was used with a name
which did not exist in the "mbox-names" property of a mailbox
client, the mailbox corresponding to the last entry in the
"mbox-names" list would be incorrectly selected.
With this patch, -EINVAL is returned if the named mailbox is
not found.

Signed-off-by: Morten Borup Petersen <morten_bp@live.dk>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

f2fs: avoid out-of-range memory access

[ Upstream commit 56f3ce675103e3fb9e631cfb4131fc768bc23e9a ]

blkoff_off might over 512 due to fs corrupt or security
vulnerability. That should be checked before being using.

Use ENTRIES_IN_SUM to protect invalid value in cur_data_blkoff.

Signed-off-by: Ocean Chen <oceanchen@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h

[ Upstream commit 9e005b761e7ad153dcf40a6cba1d681fe0830ac6 ]

The next commit will make the way of passing CONFIG options more robust.
Unfortunately, it would uncover another hidden issue; without this
commit, skiroot_defconfig would be broken like this:

|   WRAP    arch/powerpc/boot/zImage.pseries
| arch/powerpc/boot/wrapper.a(decompress.o): In function `bcj_powerpc.isra.10':
| decompress.c:(.text+0x720): undefined reference to `get_unaligned_be32'
| decompress.c:(.text+0x7a8): undefined reference to `put_unaligned_be32'
| make[1]: *** [arch/powerpc/boot/Makefile;383: arch/powerpc/boot/zImage.pseries] Error 1
| make: *** [arch/powerpc/Makefile;295: zImage] Error 2

skiroot_defconfig is the only defconfig that enables CONFIG_KERNEL_XZ
for ppc, which has never been correctly built before.

I figured out the root cause in lib/decompress_unxz.c:

| #ifdef CONFIG_PPC
| #      define XZ_DEC_POWERPC
| #endif

CONFIG_PPC is undefined here in the ppc bootwrapper because autoconf.h
is not included except by arch/powerpc/boot/serial.c

XZ_DEC_POWERPC is not defined, therefore, bcj_powerpc() is not compiled
for the bootwrapper.

With the next commit passing CONFIG_PPC correctly, we would realize that
{get,put}_unaligned_be32 was missing.

Unlike the other decompressors, the ppc bootwrapper duplicates all the
necessary helpers in arch/powerpc/boot/.

The other architectures define __KERNEL__ and pull in helpers for
building the decompressors.

If ppc bootwrapper had defined __KERNEL__, lib/xz/xz_private.h would
have included <asm/unaligned.h>:

| #ifdef __KERNEL__
| #       include <linux/xz.h>
| #       include <linux/kernel.h>
| #       include <asm/unaligned.h>

However, doing so would cause tons of definition conflicts since the
bootwrapper has duplicated everything.

I just added copies of {get,put}_unaligned_be32, following the
bootwrapper coding convention.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190705100144.28785-1-yamada.masahiro@socionext.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM

[ Upstream commit bdce1290493caa3f8119f24b5dacc3fb7ca27389 ]

Calculate the correct byte_len on the receiving side when a work
completion is generated with IB_WC_RECV_RDMA_WITH_IMM opcode.

According to the IBA byte_len must indicate the number of written bytes,
whereas it was always equal to zero for the IB_WC_RECV_RDMA_WITH_IMM
opcode, even though data was transferred.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Konstantin Taranov <konstantin.taranov@inf.ethz.ch>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf test mmap-thread-lookup: Initialize variable to suppress memory sanitizer warning

[ Upstream commit 4e4cf62b37da5ff45c904a3acf242ab29ed5881d ]

Running the 'perf test' command after building perf with a memory
sanitizer causes a warning that says:

  WARNING: MemorySanitizer: use-of-uninitialized-value... in mmap-thread-lookup.c

Initializing the go variable to 0 silences this harmless warning.

Committer warning:

This was harmless, just a simple test writing whatever was at that
sizeof(int) memory area just to signal another thread blocked reading
that file created with pipe(). Initialize it tho so that we don't get
this warning.

Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Drayton <mbd@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190702173716.181223-1-nums@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kallsyms: exclude kasan local symbols on s390

[ Upstream commit 33177f01ca3fe550146bb9001bec2fd806b2f40c ]

gcc asan instrumentation emits the following sequence to store frame pc
when the kernel is built with CONFIG_RELOCATABLE:
debug/vsprintf.s:
        .section        .data.rel.ro.local,"aw"
        .align  8
.LC3:
        .quad   .LASANPC4826@GOTOFF
.text
        .align  8
        .type   number, @function
number:
.LASANPC4826:

and in case reloc is issued for LASANPC label it also gets into .symtab
with the same address as actual function symbol:
$ nm -n vmlinux | grep 0000000001397150
0000000001397150 t .LASANPC4826
0000000001397150 t number

In the end kernel backtraces are almost unreadable:
[  143.748476] Call Trace:
[  143.748484] ([<000000002da3e62c>] .LASANPC2671+0x114/0x190)
[  143.748492]  [<000000002eca1a58>] .LASANPC2612+0x110/0x160
[  143.748502]  [<000000002de9d830>] print_address_description+0x80/0x3b0
[  143.748511]  [<000000002de9dd64>] __kasan_report+0x15c/0x1c8
[  143.748521]  [<000000002ecb56d4>] strrchr+0x34/0x60
[  143.748534]  [<000003ff800a9a40>] kasan_strings+0xb0/0x148 [test_kasan]
[  143.748547]  [<000003ff800a9bba>] kmalloc_tests_init+0xe2/0x528 [test_kasan]
[  143.748555]  [<000000002da2117c>] .LASANPC4069+0x354/0x748
[  143.748563]  [<000000002dbfbb16>] do_init_module+0x136/0x3b0
[  143.748571]  [<000000002dbff3f4>] .LASANPC3191+0x2164/0x25d0
[  143.748580]  [<000000002dbffc4c>] .LASANPC3196+0x184/0x1b8
[  143.748587]  [<000000002ecdf2ec>] system_call+0xd8/0x2d8

Since LASANPC labels are not even unique and get into .symtab only due
to relocs filter them out in kallsyms.

Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sh-sci: Fix TX DMA buffer flushing and workqueue races

[ Upstream commit 8493eab02608b0e82f67b892aa72882e510c31d0 ]

When uart_flush_buffer() is called, the .flush_buffer() callback zeroes
the tx_dma_len field.  This may race with the work queue function
handling transmit DMA requests:

  1. If the buffer is flushed before the first DMA API call,
     dmaengine_prep_slave_single() may be called with a zero length,
     causing the DMA request to never complete, leading to messages
     like:

        rcar-dmac e7300000.dma-controller: Channel Address Error happen

     and, with debug enabled:

sh-sci e6e88000.serial: sci_dma_tx_work_fn: ffff800639b55000: 0...0, cookie 126

     and DMA timeouts.

  2. If the buffer is flushed after the first DMA API call, but before
     the second, dma_sync_single_for_device() may be called with a zero
     length, causing the transmit data not to be flushed to RAM, and
     leading to stale data being output.

Fix this by:
  1. Letting sci_dma_tx_work_fn() return immediately if the transmit
     buffer is empty,
  2. Extending the critical section to cover all DMA preparational work,
     so tx_dma_len stays consistent for all of it,
  3. Using local copies of circ_buf.head and circ_buf.tail, to make sure
     they match the actual operation above.

Reported-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Suggested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20190624123540.20629-2-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: sh-sci: Terminate TX DMA during buffer flushing

[ Upstream commit 775b7ffd7d6d5db320d99b0a485c51e04dfcf9f1 ]

While the .flush_buffer() callback clears sci_port.tx_dma_len since
commit 1cf4a7efdc71cab8 ("serial: sh-sci: Fix race condition causing
garbage during shutdown"), it does not terminate a transmit DMA
operation that may be in progress.

Fix this by terminating any pending DMA operations, and resetting the
corresponding cookie.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Link: https://lore.kernel.org/r/20190624123540.20629-3-geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RDMA/i40iw: Set queue pair state when being queried

[ Upstream commit 2e67e775845373905d2c2aecb9062c2c4352a535 ]

The API for ib_query_qp requires the driver to set qp_state and
cur_qp_state on return, add the missing sets.

Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/4xx/uic: clear pending interrupt after irq type/pol change

[ Upstream commit 3ab3a0689e74e6aa5b41360bc18861040ddef5b1 ]

When testing out gpio-keys with a button, a spurious
interrupt (and therefore a key press or release event)
gets triggered as soon as the driver enables the irq
line for the first time.

This patch clears any potential bogus generated interrupt
that was caused by the switching of the associated irq's
type and polarity.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

um: Silence lockdep complaint about mmap_sem

[ Upstream commit 80bf6ceaf9310b3f61934c69b382d4912deee049 ]

When we get into activate_mm(), lockdep complains that we're doing
something strange:

    WARNING: possible circular locking dependency detected
    5.1.0-10252-gb00152307319-dirty #121 Not tainted
    ------------------------------------------------------
    inside.sh/366 is trying to acquire lock:
    (____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7

    but task is already holding lock:
    (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&mm->mmap_sem){++++}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           down_write+0x3f/0x98
           flush_old_exec+0x748/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    -> #0 (&(&p->alloc_lock)->rlock){+.+.}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           _raw_spin_lock+0x30/0x83
           flush_old_exec+0x703/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&mm->mmap_sem);
                                   lock(&(&p->alloc_lock)->rlock);
                                   lock(&mm->mmap_sem);
      lock(&(&p->alloc_lock)->rlock);

     *** DEADLOCK ***

    2 locks held by inside.sh/366:
     #0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
     #1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    stack backtrace:
    CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
    Stack:
     [...]
    Call Trace:
     [<600420de>] show_stack+0x13b/0x155
     [<6048906b>] dump_stack+0x2a/0x2c
     [<6009ae64>] print_circular_bug+0x332/0x343
     [<6009c5c6>] check_prev_add+0x669/0xdad
     [<600a06b4>] __lock_acquire+0x12ab/0x139f
     [<6009f3d0>] lock_acquire+0x155/0x18e
     [<604a07e0>] _raw_spin_lock+0x30/0x83
     [<60151e6a>] flush_old_exec+0x703/0x8d7
     [<601a8eb8>] load_elf_binary+0x2ca/0xddb
     [...]

I think it's because in exec_mmap() we have

down_read(&old_mm->mmap_sem);
...
        task_lock(tsk);
...
activate_mm(active_mm, mm);
(which does down_write(&mm->mmap_sem))

I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: hi655x-pmic: Fix missing return value check for devm_regmap_init_mmio_clk

[ Upstream commit 7efd105c27fd2323789b41b64763a0e33ed79c08 ]

Since devm_regmap_init_mmio_clk can fail, add return value checking.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Chen Feng <puck.chen@hisilicon.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: arizona: Fix undefined behavior

[ Upstream commit 5da6cbcd2f395981aa9bfc571ace99f1c786c985 ]

When the driver is used with a subdevice that is disabled in the
kernel configuration, clang gets a little confused about the
control flow and fails to notice that n_subdevs is only
uninitialized when subdevs is NULL, and we check for that,
leading to a false-positive warning:

drivers/mfd/arizona-core.c:1423:19: error: variable 'n_subdevs' is uninitialized when used here
      [-Werror,-Wuninitialized]
                              subdevs, n_subdevs, NULL, 0, NULL);
                                       ^~~~~~~~~
drivers/mfd/arizona-core.c:999:15: note: initialize the variable 'n_subdevs' to silence this warning
        int n_subdevs, ret, i;
                     ^
                      = 0

Ideally, we would rearrange the code to avoid all those early
initializations and have an explicit exit in each disabled case,
but it's much easier to chicken out and add one more initialization
here to shut up the warning.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: core: Set fwnode for created devices

[ Upstream commit c176c6d7e932662668bcaec2d763657096589d85 ]

The logic for setting the of_node on devices created by mfd did not set
the fwnode pointer to match, which caused fwnode-based APIs to
malfunction on these devices since the fwnode pointer was null. Fix
this.

Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

recordmcount: Fix spurious mcount entries on powerpc

[ Upstream commit 80e5302e4bc85a6b685b7668c36c6487b5f90e9a ]

An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to
warnings such as the following:

  # modprobe kprobe_example
  ftrace-powerpc: Not expected bl: opcode is 3c4c0001
  WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318
  Modules linked in:
  CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2
  NIP:  c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30
  REGS: c000000001f2b7b0 TRAP: 0700   Not tainted  (5.2.0-rc6-00678-g1c329100b942)
  MSR:  900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]>  CR: 28228222  XER: 00000000
  CFAR: c0000000002642fc IRQMASK: 0
  <snip>
  NIP [c000000000264318] ftrace_bug+0x90/0x318
  LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  Call Trace:
  [c000000001f2ba40] [0000000000000004] 0x4 (unreliable)
  [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0
  [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0
  [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130
  [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70
  Instruction dump:
  419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96
  39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96
  ---[ end trace 4c438d5cebf78381 ]---
  ftrace failed to modify
  [<c0080000012a0008>] 0xc0080000012a0008
   actual:   01:00:4c:3c
  Initializing ftrace call sites
  ftrace record flags: 2000000
   (0)
   expected tramp: c00000000006af4c

Looking at the relocation records in __mcount_loc shows a few spurious
entries:

  RELOCATION RECORDS FOR [__mcount_loc]:
  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_ADDR64    .text.unlikely+0x0000000000000008
  0000000000000008 R_PPC64_ADDR64    .text.unlikely+0x0000000000000014
  0000000000000010 R_PPC64_ADDR64    .text.unlikely+0x0000000000000060
  0000000000000018 R_PPC64_ADDR64    .text.unlikely+0x00000000000000b4
  0000000000000020 R_PPC64_ADDR64    .init.text+0x0000000000000008
  0000000000000028 R_PPC64_ADDR64    .init.text+0x0000000000000014

The first entry in each section is incorrect. Looking at the
relocation records, the spurious entries correspond to the
R_PPC64_ENTRY records:

  RELOCATION RECORDS FOR [.text.unlikely]:
  OFFSET           TYPE              VALUE
  0000000000000000 R_PPC64_REL64     .TOC.-0x0000000000000008
  0000000000000008 R_PPC64_ENTRY     *ABS*
  0000000000000014 R_PPC64_REL24     _mcount
  <snip>

The problem is that we are not validating the return value from
get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0,
but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring
mcountsym is valid before processing the entry.

Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iio: iio-utils: Fix possible incorrect mask calculation

[ Upstream commit 208a68c8393d6041a90862992222f3d7943d44d6 ]

On some machines, iio-sensor-proxy was returning all 0's for IIO sensor
values. It turns out that the bits_used for this sensor is 32, which makes
the mask calculation:

*mask = (1 << 32) - 1;

If the compiler interprets the 1 literals as 32-bit ints, it generates
undefined behavior depending on compiler version and optimization level.
On my system, it optimizes out the shift, so the mask value becomes

*mask = (1) - 1;

With a mask value of 0, iio-sensor-proxy will always return 0 for every axis.

Avoid incorrect 0 values caused by compiler optimization.

See original fix by Brett Dutro <brett.dutro@gmail.com> in
iio-sensor-proxy:
https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3

Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: xilinx-nwl: Fix Multi MSI data programming

[ Upstream commit 181fa434d0514e40ebf6e9721f2b72700287b6e2 ]

According to the PCI Local Bus specification Revision 3.0,
section 6.8.1.3 (Message Control for MSI), endpoints that
are Multiple Message Capable as defined by bits [3:1] in
the Message Control for MSI can request a number of vectors
that is power of two aligned.

As specified in section 6.8.1.6 "Message data for MSI", the Multiple
Message Enable field (bits [6:4] of the Message Control register)
defines the number of low order message data bits the function is
permitted to modify to generate its system software allocated
vectors.

The MSI controller in the Xilinx NWL PCIe controller supports a number
of MSI vectors specified through a bitmap and the hwirq number for an
MSI, that is the value written in the MSI data TLP is determined by
the bitmap allocation.

For instance, in a situation where two endpoints sitting on
the PCI bus request the following MSI configuration, with
the current PCI Xilinx bitmap allocation code (that does not
align MSI vector allocation on a power of two boundary):

Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0
Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2]

The bitmap value(s) corresponds to the hwirq number that is programmed
into the Message Data for MSI field in the endpoint MSI capability
and is detected by the root complex to fire the corresponding
MSI irqs. The value written in Message Data for MSI field corresponds
to the first bit allocated in the bitmap for Multi MSI vectors.

The current Xilinx NWL MSI allocation code allows a bitmap allocation
that is not a power of two boundaries, so endpoint #2, is allowed to
toggle Message Data bit[0] to differentiate between its two vectors
(meaning that the MSI data will be respectively 0x0 and 0x1 for the two
vectors allocated to endpoint #2).

This clearly aliases with the Endpoint #1 vector allocation, resulting
in a broken Multi MSI implementation.

Update the code to allocate MSI bitmap ranges with a power of two
alignment, fixing the bug.

Fixes: ab597d35ef11 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller")
Suggested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

kbuild: Add -Werror=unknown-warning-option to CLANG_FLAGS

[ Upstream commit 589834b3a0097a4908f4112eac0ca2feb486fa32 ]

In commit ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI
drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is
a GCC only option so clang rightfully complains:

warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option]

https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option

However, by default, this is merely a warning so the build happily goes
on with a slew of these warnings in the process.

Commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to
support clang") worked around this behavior in cc-option by adding
-Werror so that unknown flags cause an error. However, this all happens
silently and when an unknown flag is added to the build unconditionally
like -Wno-psabi, cc-option will always fail because there is always an
unknown flag in the list of flags. This manifested as link time failures
in the arm64 libstub because -fno-stack-protector didn't get added to
KBUILD_CFLAGS.

To avoid these weird cryptic failures in the future, make clang behave
like gcc and immediately error when it encounters an unknown flag by
adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added
unconditionally for clang because it is supported by at least 3.0.0,
according to godbolt [1] and 4.0.0, according to its documentation [2],
which is far earlier than we typically support.

[1]: https://godbolt.org/z/7F7rm3
[2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option

Link: https://github.com/ClangBuiltLinux/linux/issues/511
Link: https://github.com/ClangBuiltLinux/linux/issues/517
Suggested-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

PCI: sysfs: Ignore lockdep for remove attribute

[ Upstream commit dc6b698a86fe40a50525433eb8e92a267847f6f9 ]

With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device
below it causes a lockdep warning, e.g.,

  # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove
  ============================================
  WARNING: possible recursive locking detected
  ...
  pci_bus 0000:01: busn_res: [bus 01] is released

The remove recursively removes the subtree below the bridge.  Each call
uses a different lock so there's no deadlock, but the locks were all
created with the same lockdep key so the lockdep checker can't tell them
apart.

Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is
safe to ignore the lockdep check between different "remove" kernfs
instances.

There's discussion about a similar issue in USB at [1], which resulted in
356c05d58af0 ("sysfs: get rid of some lockdep false positives") and
e9b526fe7048 ("i2c: suppress lockdep warning on delete_device"), which do
basically the same thing for USB "remove" and i2c "delete_device" files.

[1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org
Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.com
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
[bhelgaas: trim commit log, details at above links]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Phil Edworthy <phil.edworthy@renesas.com>
Cc: Simon Horman <horms+renesas@verge.net.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

powerpc/pci/of: Fix OF flags parsing for 64bit BARs

[ Upstream commit df5be5be8735ef2ae80d5ae1f2453cd81a035c4b ]

When the firmware does PCI BAR resource allocation, it passes the assigned
addresses and flags (prefetch/64bit/...) via the "reg" property of
a PCI device device tree node so the kernel does not need to do
resource allocation.

The flags are stored in resource::flags - the lower byte stores
PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc.
Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated,
such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc.
When parsing the "reg" property, we copy the prefetch flag but we skip
on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync.

The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions:
1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch()
or by passing "/chosen/linux,pci-probe-only");
2. we request resource alignment (by passing pci=resource_alignment=
via the kernel cmd line to request PAGE_SIZE alignment or defining
ppc_md.pcibios_default_alignment which returns anything but 0). Note that
the alignment requests are ignored if PCI_PROBE_ONLY is enabled.

With 1) and 2), the generic PCI code in the kernel unconditionally
decides to:
- reassign the BARs in pci_specified_resource_alignment() (works fine)
- write new BARs to the device - this fails for 64bit BARs as the generic
code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits
of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping
in the hypervisor.

This fixes the issue by copying the flag. This is useful if we want to
enforce certain BAR alignment per platform as handling subpage sized BARs
is proven to cause problems with hotplug (SLOF already aligns BARs to 64k).

Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Sam Bobroff <sbobroff@linux.ibm.com>
Reviewed-by: Oliver O'Halloran <oohall@gmail.com>
Reviewed-by: Shawn Anastasio <shawn@anastas.io>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: gadget: Zero ffs_io_data

[ Upstream commit 508595515f4bcfe36246e4a565cf280937aeaade ]

In some cases the "Allocate & copy" block in ffs_epfile_io() is not
executed. Consequently, in such a case ffs_alloc_buffer() is never called
and struct ffs_io_data is not initialized properly. This in turn leads to
problems when ffs_free_buffer() is called at the end of ffs_epfile_io().

This patch uses kzalloc() instead of kmalloc() in the aio case and memset()
in non-aio case to properly initialize struct ffs_io_data.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial_core: Set port active bit in uart_port_activate

[ Upstream commit 13b18d35909707571af9539f7731389fbf0feb31 ]

A bug was introduced by commit b3b576461864 ("tty: serial_core: convert
uart_open to use tty_port_open"). It caused a constant warning printed
into the system log regarding the tty and port counter mismatch:

[   21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2

in case if session hangup was detected so the warning is printed starting
from the second open-close iteration.

Particularly the problem was discovered in situation when there is a
serial tty device without hardware back-end being setup. It is considered
by the tty-serial subsystems as a hardware problem with session hang up.
In this case uart_startup() will return a positive value with TTY_IO_ERROR
flag set in corresponding tty_struct instance. The same value will get
passed to be returned from the activate() callback and then being returned
from tty_port_open(). But since in this case tty_port_block_til_ready()
isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been
called before tty_port_open conversion was introduced and the rest of the
subsystem code expected the bit being set in this case), which prevents the
uart_hangup() method to perform any cleanups including the tty port
counter setting to zero. So the next attempt to open/close the tty device
will discover the counters mismatch.

In order to fix the problem we need to manually set the TTY_PORT_ACTIVE
flag in case if uart_startup() returned a positive value. In this case
the hang up procedure will perform a full set of cleanup actions including
the port ref-counter resetting.

Fixes: b3b576461864 "tty: serial_core: convert uart_open to use tty_port_open"
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/rockchip: Properly adjust to a true clock in adjusted_mode

[ Upstream commit 99b9683f2142b20bad78e61f7f829e8714e45685 ]

When fixing up the clock in vop_crtc_mode_fixup() we're not doing it
quite correctly.  Specifically if we've got the true clock 266666667 Hz,
we'll perform this calculation:
   266666667 / 1000 => 266666

Later when we try to set the clock we'll do clk_set_rate(266666 *
1000).  The common clock framework won't actually pick the proper clock
in this case since it always wants clocks <= the specified one.

Let's solve this by using DIV_ROUND_UP.

Fixes: b59b8de31497 ("drm/rockchip: return a true clock rate to adjusted_mode")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.org
Signed-off-by: Sasha Levin <sashal@kernel.org>

phy: renesas: rcar-gen2: Fix memory leak at error paths

[ Upstream commit d4a36e82924d3305a17ac987a510f3902df5a4b2 ]

This patch fixes memory leak at error paths of the probe function.
In for_each_child_of_node, if the loop returns, the driver should
call of_put_node() before returns.

Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Fixes: 1233f59f745b237 ("phy: Renesas R-Car Gen2 PHY driver")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/virtio: Add memory barriers for capset cache.

[ Upstream commit 9ff3a5c88e1f1ab17a31402b96d45abe14aab9d7 ]

After data is copied to the cache entry, atomic_set is used indicate
that the data is the entry is valid without appropriate memory barriers.
Similarly the read side was missing the corresponding memory barriers.

Signed-off-by: David Riley <davidriley@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

serial: 8250: Fix TX interrupt handling condition

[ Upstream commit db1b5bc047b3cadaedab3826bba82c3d9e023c4b ]

Interrupt handler checked THRE bit (transmitter holding register
empty) in LSR to detect if TX fifo is empty.
In case when there is only receive interrupts the TX handling
got called because THRE bit in LSR is set when there is no
transmission (FIFO empty). TX handling caused TX stop, which in
RS-485 half-duplex mode actually resets receiver FIFO. This is not
desired during reception because of possible data loss.

The fix is to check if THRI is set in IER in addition of the TX
fifo status. THRI in IER is set when TX is started and cleared
when TX is stopped.
This ensures that TX handling is only called when there is really
transmission on going and an interrupt for THRE and not when there
are only RX interrupts.

Signed-off-by: Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: msm_serial: avoid system lockup condition

[ Upstream commit ba3684f99f1b25d2a30b6956d02d339d7acb9799 ]

The function msm_wait_for_xmitr can be taken with interrupts
disabled. In order to avoid a potential system lockup - demonstrated
under stress testing conditions on SoC QCS404/5 - make sure we wait
for a bounded amount of time.

Tested on SoC QCS404.

Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty/serial: digicolor: Fix digicolor-usart already registered warning

[ Upstream commit c7ad9ba0611c53cfe194223db02e3bca015f0674 ]

When modprobe/rmmod/modprobe module, if platform_driver_register() fails,
the kernel complained,

  proc_dir_entry 'driver/digicolor-usart' already registered
  WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270

Fix this by adding uart_unregister_driver() when platform_driver_register() fails.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

memstick: Fix error cleanup path of memstick_init

[ Upstream commit 65f1a0d39c289bb6fc85635528cd36c4b07f560e ]

If bus_register fails. On its error handling path, it has cleaned up
what it has done. There is no need to call bus_unregister again.
Otherwise, if bus_unregister is called, issues such as null-ptr-deref
will arise.

Syzkaller report this:

kobject_add_internal failed for memstick (error: -12 parent: bus)
BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460

Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xa9/0x10e lib/dump_stack.c:113
 __kasan_report+0x171/0x18d mm/kasan/report.c:321
 kasan_report+0xe/0x20 mm/kasan/common.c:614
 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467
 sysfs_remove_file include/linux/sysfs.h:519 [inline]
 bus_remove_file+0x6c/0x90 drivers/base/bus.c:145
 remove_probe_files drivers/base/bus.c:599 [inline]
 bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000
 memstick_init+0x7a/0x1000 [memstick]
 do_one_initcall+0xb9/0x3b5 init/main.c:914
 do_init_module+0xe0/0x330 kernel/module.c:3468
 load_module+0x38eb/0x4270 kernel/module.c:3819
 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909
 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: baf8532a147d ("memstick: initial commit for Sony MemoryStick support")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai26@huawei.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz

[ Upstream commit 8dbfc5b65023b67397aca28e8adb25c819f6398c ]

The pixel clock unit in the first two registers (0x00 and 0x01) of
sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by
10 fixes the issue.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1a2a8eae0b9d6333e7a5841026bf7fd65c9ccd09.1558964241.git.jsarha@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/bridge: tc358767: read display_props in get_modes()

[ Upstream commit 3231573065ad4f4ecc5c9147b24f29f846dc0c2f ]

We need to know the link bandwidth to filter out modes we cannot
support, so we need to have read the display props before doing the
filtering.

To ensure we have up to date display props, call tc_get_display_props()
in the beginning of tc_connector_get_modes().

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528082747.3631-22-tomi.valkeinen@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: serial: cpm_uart - fix init when SMC is relocated

[ Upstream commit 06aaa3d066db87e8478522d910285141d44b1e58 ]

SMC relocation can also be activated earlier by the bootloader,
so the driver's behaviour cannot rely on selected kernel config.

When the SMC is relocated, CPM_CR_INIT_TRX cannot be used.

But the only thing CPM_CR_INIT_TRX does is to clear the
rstate and tstate registers, so this can be done manually,
even when SMC is not relocated.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: 9ab921201444 ("cpm_uart: fix non-console port startup bug")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: rockchip: fix leaked of_node references

[ Upstream commit 3c89c70634bb0b6f48512de873e7a45c7e1fbaa5 ]

The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.

Detected by coccinelle with the following warnings:
./drivers/pinctrl/pinctrl-rockchip.c:3221:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function.
./drivers/pinctrl/pinctrl-rockchip.c:3223:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3196, but without a corresponding object release within this function.

Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: linux-gpio@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tty: max310x: Fix invalid baudrate divisors calculator

[ Upstream commit 35240ba26a932b279a513f66fa4cabfd7af55221 ]

Current calculator doesn't do it' job quite correct. First of all the
max310x baud-rates generator supports the divisor being less than 16.
In this case the x2/x4 modes can be used to double or quadruple
the reference frequency. But the current baud-rate setter function
just filters all these modes out by the first condition and setups
these modes only if there is a clocks-baud division remainder. The former
doesn't seem right at all, since enabling the x2/x4 modes causes the line
noise tolerance reduction and should be only used as a last resort to
enable a requested too high baud-rate.

Finally the fraction is supposed to be calculated from D = Fref/(c*baud)
formulae, but not from D % 16, which causes the precision loss. So to speak
the current baud-rate calculator code works well only if the baud perfectly
fits to the uart reference input frequency.

Lets fix the calculator by implementing the algo fully compliant with
the fractional baud-rate generator described in the datasheet:
D = Fref / (c*baud), where c={16,8,4} is the x1/x2/x4 rate mode
respectively, Fref - reference input frequency. The divisor fraction is
calculated from the same formulae, but making sure it is found with a
resolution of 0.0625 (four bits).

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

usb: core: hub: Disable hub-initiated U1/U2

[ Upstream commit 561759292774707b71ee61aecc07724905bb7ef1 ]

If the device rejects the control transfer to enable device-initiated
U1/U2 entry, then the device will not initiate U1/U2 transition. To
improve the performance, the downstream port should not initate
transition to U1/U2 to avoid the delay from the device link command
response (no packet can be transmitted while waiting for a response from
the device). If the device has some quirks and does not implement U1/U2,
it may reject all the link state change requests, and the downstream
port may resend and flood the bus with more requests. This will affect
the device performance even further. This patch disables the
hub-initated U1/U2 if the device-initiated U1/U2 entry fails.

Reference: USB 3.2 spec 7.2.4.2.3

Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/panel: simple: Fix panel_simple_dsi_probe

[ Upstream commit 7ad9db66fafb0f0ad53fd2a66217105da5ddeffe ]

In case mipi_dsi_attach() fails remove the registered panel to avoid added
panel without corresponding device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190226081153.31334-1-peter.ujfalusi@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fix overflow causing non-working mounts on 1 TB machines

[ Upstream commit 3b2d4dcf71c4a91b420f835e52ddea8192300a3b ]

Since commit 10a68cdf10 (nfsd: fix performance-limiting session
calculation) (Linux 5.1-rc1 and 4.19.31), shares from NFS servers with
1 TB of memory cannot be mounted anymore. The mount just hangs on the
client.

The gist of commit 10a68cdf10 is the change below.

    -avail = clamp_t(int, avail, slotsize, avail/3);
    +avail = clamp_t(int, avail, slotsize, total_avail/3);

Here are the macros.

    #define min_t(type, x, y)       __careful_cmp((type)(x), (type)(y), <)
    #define clamp_t(type, val, lo, hi) min_t(type, max_t(type, val, lo), hi)

`total_avail` is 8,434,659,328 on the 1 TB machine. `clamp_t()` casts
the values to `int`, which for 32-bit integers can only hold values
−2,147,483,648 (−2^31) through 2,147,483,647 (2^31 − 1).

`avail` (in the function signature) is just 65536, so that no overflow
was happening. Before the commit the assignment would result in 21845,
and `num = 4`.

When using `total_avail`, it is causing the assignment to be
18446744072226137429 (printed as %lu), and `num` is then 4164608182.

My next guess is, that `nfsd_drc_mem_used` is then exceeded, and the
server thinks there is no memory available any more for this client.

Updating the arguments of `clamp_t()` and `min_t()` to `unsigned long`
fixes the issue.

Now, `avail = 65536` (before commit 10a68cdf10 `avail = 21845`), but
`num = 4` remains the same.

Fixes: c54f24e338ed (nfsd: fix performance-limiting session calculation)
Cc: stable@vger.kernel.org
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: fix performance-limiting session calculation

[ Upstream commit c54f24e338ed2a35218f117a4a1afb5f9e2b4e64 ]

We're unintentionally limiting the number of slots per nfsv4.1 session
to 10.  Often more than 10 simultaneous RPCs are needed for the best
performance.

This calculation was meant to prevent any one client from using up more
than a third of the limit we set for total memory use across all clients
and sessions.  Instead, it's limiting the client to a third of the
maximum for a single session.

Fix this.

Reported-by: Chris Tracy <ctracy@engr.scu.edu>
Cc: stable@vger.kernel.org
Fixes: de766e570413 "nfsd: give out fewer session slots as limit approaches"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: give out fewer session slots as limit approaches

[ Upstream commit de766e570413bd0484af0b580299b495ada625c3 ]

Instead of granting client's full requests until we hit our DRC size
limit and then failing CREATE_SESSIONs (and hence mounts) completely,
start granting clients smaller slot tables as we approach the limit.

The factor chosen here is pretty much arbitrary.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: increase DRC cache limit

[ Upstream commit 44d8660d3bb0a1c8363ebcb906af2343ea8e15f6 ]

An NFSv4.1+ client negotiates the size of its duplicate reply cache size
in the initial CREATE_SESSION request.  The server preallocates the
memory for the duplicate reply cache to ensure that we'll never fail to
record the response to a nonidempotent operation.

To prevent a few CREATE_SESSIONs from consuming all of memory we set an
upper limit based on nr_free_buffer_pages().  1/2^10 has been too
limiting in practice; 1/2^7 is still less than one percent.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4: Fix open create exclusive when the server reboots

[ Upstream commit 8fd1ab747d2b1ec7ec663ad0b41a32eaa35117a8 ]

If the server that does not implement NFSv4.1 persistent session
semantics reboots while we are performing an exclusive create,
then the return value of NFS4ERR_DELAY when we replay the open
during the grace period causes us to lose the verifier.
When the grace period expires, and we present a new verifier,
the server will then correctly reply NFS4ERR_EXIST.

This commit ensures that we always present the same verifier when
replaying the OPEN.

Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

perf/events/amd/uncore: Fix amd_uncore_llc ID to use pre-defined cpu_llc_id

Current logic iterates over CPUID Fn8000001d leafs (Cache Properties)
to detect the last level cache, and derive the last-level cache ID.
However, this information is already available in the cpu_llc_id.
Therefore, make use of it instead.

Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Link: http://lkml.kernel.org/r/1524864877-111962-3-git-send-email-suravee.suthikulpanit@amd.com

perf/x86/amd/uncore: Get correct number of cores sharing last level cache

In Family 17h, the number of cores sharing a cache level is obtained
from the Cache Properties CPUID leaf (0x8000001d) by passing in the
cache level in ECX. In prior families, a cache level of 2 was used to
determine this information.

To get the right information, irrespective of Family, iterate over
the cache levels using CPUID 0x8000001d. The last level cache is the
last value to return a non-zero value in EAX.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/5ab569025b39cdfaeca55b571d78c0fc800bdb69.1497452002.git.Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/amd/uncore: Rename 'L2' to 'LLC'

This patch renames L2 counters to LLC counters. In AMD Family17h
processors, L3 cache counter is supported.

Since older families have at most L2 counters, last level cache (LLC)
indicates L2/L3 based on the family.

Signed-off-by: Janakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/5d8cd8736d8d578354597a548e64ff16210c319b.1484598705.git.Janakarajan.Natarajan@amd.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

net: bridge: stp: don't cache eth dest pointer before skb pull

[ Upstream commit 2446a68ae6a8cee6d480e2f5b52f5007c7c41312 ]

Don't cache eth dest pointer before calling pskb_may_pull.

Fixes: cf0f02d04a83 ("[BRIDGE]: use llc for receiving STP packets")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: mcast: fix stale ipv6 hdr pointer when handling v6 query

[ Upstream commit 3b26a5d03d35d8f732d75951218983c0f7f68dff ]

We get a pointer to the ipv6 hdr in br_ip6_multicast_query but we may
call pskb_may_pull afterwards and end up using a stale pointer.
So use the header directly, it's just 1 place where it's needed.

Fixes: 08b202b67264 ("bridge br_multicast: IPv6 MLD support.")
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: bridge: mcast: fix stale nsrcs pointer in igmp3/mld2 report handling

[ Upstream commit e57f61858b7cf478ed6fa23ed4b3876b1c9625c4 ]

We take a pointer to grec prior to calling pskb_may_pull and use it
afterwards to get nsrcs so record nsrcs before the pull when handling
igmp3 and we get a pointer to nsrcs and call pskb_may_pull when handling
mld2 which again could lead to reading 2 bytes out-of-bounds.

 ==================================================================
 BUG: KASAN: use-after-free in br_multicast_rcv+0x480c/0x4ad0 [bridge]
 Read of size 2 at addr ffff8880421302b4 by task ksoftirqd/1/16

 CPU: 1 PID: 16 Comm: ksoftirqd/1 Tainted: G           OE     5.2.0-rc6+ #1
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
 Call Trace:
  dump_stack+0x71/0xab
  print_address_description+0x6a/0x280
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  __kasan_report+0x152/0x1aa
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_rcv+0x480c/0x4ad0 [bridge]
  kasan_report+0xe/0x20
  br_multicast_rcv+0x480c/0x4ad0 [bridge]
  ? br_multicast_disable_port+0x150/0x150 [bridge]
  ? ktime_get_with_offset+0xb4/0x150
  ? __kasan_kmalloc.constprop.6+0xa6/0xf0
  ? __netif_receive_skb+0x1b0/0x1b0
  ? br_fdb_update+0x10e/0x6e0 [bridge]
  ? br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  br_handle_frame_finish+0x3c6/0x11d0 [bridge]
  ? br_pass_frame_up+0x3a0/0x3a0 [bridge]
  ? virtnet_probe+0x1c80/0x1c80 [virtio_net]
  br_handle_frame+0x731/0xd90 [bridge]
  ? select_idle_sibling+0x25/0x7d0
  ? br_handle_frame_finish+0x11d0/0x11d0 [bridge]
  __netif_receive_skb_core+0xced/0x2d70
  ? virtqueue_get_buf_ctx+0x230/0x1130 [virtio_ring]
  ? do_xdp_generic+0x20/0x20
  ? virtqueue_napi_complete+0x39/0x70 [virtio_net]
  ? virtnet_poll+0x94d/0xc78 [virtio_net]
  ? receive_buf+0x5120/0x5120 [virtio_net]
  ? __netif_receive_skb_one_core+0x97/0x1d0
  __netif_receive_skb_one_core+0x97/0x1d0
  ? __netif_receive_skb_core+0x2d70/0x2d70
  ? _raw_write_trylock+0x100/0x100
  ? __queue_work+0x41e/0xbe0
  process_backlog+0x19c/0x650
  ? _raw_read_lock_irq+0x40/0x40
  net_rx_action+0x71e/0xbc0
  ? __switch_to_asm+0x40/0x70
  ? napi_complete_done+0x360/0x360
  ? __switch_to_asm+0x34/0x70
  ? __switch_to_asm+0x40/0x70
  ? __schedule+0x85e/0x14d0
  __do_softirq+0x1db/0x5f9
  ? takeover_tasklets+0x5f0/0x5f0
  run_ksoftirqd+0x26/0x40
  smpboot_thread_fn+0x443/0x680
  ? sort_range+0x20/0x20
  ? schedule+0x94/0x210
  ? __kthread_parkme+0x78/0xf0
  ? sort_range+0x20/0x20
  kthread+0x2ae/0x3a0
  ? kthread_create_worker_on_cpu+0xc0/0xc0
  ret_from_fork+0x35/0x40

 The buggy address belongs to the page:
 page:ffffea0001084c00 refcount:0 mapcount:-128 mapping:0000000000000000 index:0x0
 flags: 0xffffc000000000()
 raw: 00ffffc000000000 ffffea0000cfca08 ffffea0001098608 0000000000000000
 raw: 0000000000000000 0000000000000003 00000000ffffff7f 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
 ffff888042130180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130200: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 > ffff888042130280: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                     ^
 ffff888042130300: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff888042130380: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ==================================================================
 Disabling lock debugging due to kernel taint

Fixes: bc8c20acaea1 ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave")
Reported-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Tested-by: Martin Weinelt <martin@linuxlounge.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tcp: Reset bytes_acked and bytes_received when disconnecting

[ Upstream commit e858faf556d4e14c750ba1e8852783c6f9520a0e ]

If an app is playing tricks to reuse a socket via tcp_disconnect(),
bytes_acked/received needs to be reset to 0. Otherwise tcp_info will
report the sum of the current and the old connection..

Cc: Eric Dumazet <edumazet@google.com>
Fixes: 0df48c26d841 ("tcp: add tcpi_bytes_acked to tcp_info")
Fixes: bdd1f9edacb5 ("tcp: add tcpi_bytes_received to tcp_info")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bonding: validate ip header before check IPPROTO_IGMP

[ Upstream commit 9d1bc24b52fb8c5d859f9a47084bf1179470e04c ]

bond_xmit_roundrobin() checks for IGMP packets but it parses
the IP header even before checking skb->protocol.

We should validate the IP header with pskb_may_pull() before
using iph->protocol.

Reported-and-tested-by: syzbot+e5be16aa39ad6e755391@syzkaller.appspotmail.com
Fixes: a2fd940f4cff ("bonding: fix broken multicast with round-robin mode")
Cc: Jay Vosburgh <j.vosburgh@gmail.com>
Cc: Veaceslav Falico <vfalico@gmail.com>
Cc: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netrom: hold sock when setting skb->destructor

[ Upstream commit 4638faac032756f7eab5524be7be56bee77e426b ]

sock_efree() releases the sock refcnt, if we don't hold this refcnt
when setting skb->destructor to it, the refcnt would not be balanced.
This leads to several bug reports from syzbot.

I have checked other users of sock_efree(), all of them hold the
sock refcnt.

Fixes: c8c8218ec5af ("netrom: fix a memory leak in nr_rx_frame()")
Reported-and-tested-by: <syzbot+622bdabb128acc33427d@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+6eaef7158b19e3fec3a0@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+9399c158fcc09b21d0d2@syzkaller.appspotmail.com>
Reported-and-tested-by: <syzbot+a34e5f3d0300163f0c87@syzkaller.appspotmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

netrom: fix a memory leak in nr_rx_frame()

[ Upstream commit c8c8218ec5af5d2598381883acbefbf604e56b5e ]

When the skb is associated with a new sock, just assigning
it to skb->sk is not sufficient, we have to set its destructor
to free the sock properly too.

Reported-by: syzbot+d6636a36d3c34bd88938@syzkaller.appspotmail.com
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: fix checksumming after decryption

[ Upstream commit 7d8b16b9facb0dd81d1469808dd9a575fa1d525a ]

Fix checksumming after decryption.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

macsec: fix use-after-free of skb during RX

[ Upstream commit 095c02da80a41cf6d311c504d8955d6d1c2add10 ]

Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

vrf: make sure skb->data contains ip header to make routing

[ Upstream commit 107e47cc80ec37cb332bd41b22b1c7779e22e018 ]

vrf_process_v4_outbound() and vrf_process_v6_outbound() do routing
using ip/ipv6 addresses, but don't make sure the header is available
in skb->data[] (skb_headlen() is less then header size).

Case:

1) igb driver from intel.
2) Packet size is greater then 255.
3) MPLS forwards to VRF device.

So, patch adds pskb_may_pull() calls in vrf_process_v4/v6_outbound()
functions.

Signed-off-by: Peter Kosyh <p.kosyh@gmail.com>
Reviewed-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

sky2: Disable MSI on ASUS P6T

[ Upstream commit a261e3797506bd561700be643fe1a85bf81e9661 ]

The onboard sky2 NIC on ASUS P6T WS PRO doesn't work after PM resume
due to the infamous IRQ problem.  Disabling MSI works around it, so
let's add it to the blacklist.

Unfortunately the BIOS on the machine doesn't fill the standard
DMI_SYS_* entry, so we pick up DMI_BOARD_* entries instead.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1142496
Reported-and-tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix send on a connected, but unbound socket

[ Upstream commit e835ada07091f40dcfb1bc735082bd0a7c005e59 ]

If sendmsg() or sendmmsg() is called on a connected socket that hasn't had
bind() called on it, then an oops will occur when the kernel tries to
connect the call because no local endpoint has been allocated.

Fix this by implicitly binding the socket if it is in the
RXRPC_CLIENT_UNBOUND state, just like it does for the RXRPC_UNBOUND state.

Further, the state should be transitioned to RXRPC_CLIENT_BOUND after this
to prevent further attempts to bind it.

This can be tested with:

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/socket.h>
#include <arpa/inet.h>
#include <linux/rxrpc.h>
static const unsigned char inet6_addr[16] = {
0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -1, -1, 0xac, 0x14, 0x14, 0xaa
};
int main(void)
{
struct sockaddr_rxrpc srx;
struct cmsghdr *cm;
struct msghdr msg;
unsigned char control[16];
int fd;
memset(&srx, 0, sizeof(srx));
srx.srx_family = 0x21;
srx.srx_service = 0;
srx.transport_type = AF_INET;
srx.transport_len = 0x1c;
srx.transport.sin6.sin6_family = AF_INET6;
srx.transport.sin6.sin6_port = htons(0x4e22);
srx.transport.sin6.sin6_flowinfo = htons(0x4e22);
srx.transport.sin6.sin6_scope_id = htons(0xaa3b);
memcpy(&srx.transport.sin6.sin6_addr, inet6_addr, 16);
cm = (struct cmsghdr *)control;
cm->cmsg_len = CMSG_LEN(sizeof(unsigned long));
cm->cmsg_level = SOL_RXRPC;
cm->cmsg_type = RXRPC_USER_CALL_ID;
*(unsigned long *)CMSG_DATA(cm) = 0;
msg.msg_name = NULL;
msg.msg_namelen = 0;
msg.msg_iov = NULL;
msg.msg_iovlen = 0;
msg.msg_control = control;
msg.msg_controllen = cm->cmsg_len;
msg.msg_flags = 0;
fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET);
connect(fd, (struct sockaddr *)&srx, sizeof(srx));
sendmsg(fd, &msg, 0);
return 0;
}

Leading to the following oops:

BUG: kernel NULL pointer dereference, address: 0000000000000018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_connect_call+0x42/0xa01
...
Call Trace:
 ? mark_held_locks+0x47/0x59
 ? __local_bh_enable_ip+0xb6/0xba
 rxrpc_new_client_call+0x3b1/0x762
 ? rxrpc_do_sendmsg+0x3c0/0x92e
 rxrpc_do_sendmsg+0x3c0/0x92e
 rxrpc_sendmsg+0x16b/0x1b5
 sock_sendmsg+0x2d/0x39
 ___sys_sendmsg+0x1a4/0x22a
 ? release_sock+0x19/0x9e
 ? reacquire_held_locks+0x136/0x160
 ? release_sock+0x19/0x9e
 ? find_held_lock+0x2b/0x6e
 ? __lock_acquire+0x268/0xf73
 ? rxrpc_connect+0xdd/0xe4
 ? __local_bh_enable_ip+0xb6/0xba
 __sys_sendmsg+0x5e/0x94
 do_syscall_64+0x7d/0x1bf
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: 2341e0775747 ("rxrpc: Simplify connect() implementation and simplify sendmsg() op")
Reported-by: syzbot+7966f2a0b2c7da8939b4@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

nfc: fix potential illegal memory access

[ Upstream commit dd006fc434e107ef90f7de0db9907cbc1c521645 ]

The frags_q is not properly initialized, it may result in illegal memory
access when conn_info is NULL.
The "goto free_exit" should be replaced by "goto exit".

Signed-off-by: Yang Wei <albin_yang@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: openvswitch: fix csum updates for MPLS actions

[ Upstream commit 0e3183cd2a64843a95b62f8bd4a83605a4cf0615 ]

Skbs may have their checksum value populated by HW. If this is a checksum
calculated over the entire packet then the CHECKSUM_COMPLETE field is
marked. Changes to the data pointer on the skb throughout the network
stack still try to maintain this complete csum value if it is required
through functions such as skb_postpush_rcsum.

The MPLS actions in Open vSwitch modify a CHECKSUM_COMPLETE value when
changes are made to packet data without a push or a pull. This occurs when
the ethertype of the MAC header is changed or when MPLS lse fields are
modified.

The modification is carried out using the csum_partial function to get the
csum of a buffer and add it into the larger checksum. The buffer is an
inversion of the data to be removed followed by the new data. Because the
csum is calculated over 16 bits and these values align with 16 bits, the
effect is the removal of the old value from the CHECKSUM_COMPLETE and
addition of the new value.

However, the csum fed into the function and the outcome of the
calculation are also inverted. This would only make sense if it was the
new value rather than the old that was inverted in the input buffer.

Fix the issue by removing the bit inverts in the csum_partial calculation.

The bug was verified and the fix tested by comparing the folded value of
the updated CHECKSUM_COMPLETE value with the folded value of a full
software checksum calculation (reset skb->csum to 0 and run
skb_checksum_complete(skb)). Prior to the fix the outcomes differed but
after they produce the same result.

Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel")
Fixes: bc7cc5999fd3 ("openvswitch: update checksum in {push,pop}_mpls")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>