Xihai Zhu [Tue, 20 Aug 2019 04:15:23 +0000 (00:15 -0400)]
amvecm: fix minor issue of CM histogram [1/1]
PD#SWPL-12885
Problem:
incorrect bin num of cm histogram
Solution:
have the value reflect register
spec correctly
Verify:
TL1
Change-Id: I77088cae29d716228c80fb31462585fdf67f34d9
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
shaochan.liu [Mon, 15 Jul 2019 12:00:23 +0000 (20:00 +0800)]
lcd: add tcon regs block write [1/1]
PD#TV-7849
Problem:
need support tcon regs block write for gamma tooling
Solution:
add tcon regs block write
Verify:
x301
Change-Id: I4657bbd41ae5caa95ed35f8758e5d99eac79de44
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Xihai Zhu [Thu, 11 Jul 2019 10:05:38 +0000 (06:05 -0400)]
amvecm: update pixel probe [1/2]
PD#SWPL-11790
Problem:
related register usage is wrong
Solution:
have probe register usage aligned with
correct spec
Verify:
TL1
Change-Id: I8345f58d96ac0f3447c47065a61c747907341c1d
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Zhe Wang [Fri, 9 Aug 2019 06:34:02 +0000 (14:34 +0800)]
audio: if hdmiin is unsatble, set default resample to 48K [2/2]
PD#TV-8378
Problem:
shutdown test for hdmiin, sometimes audio is silence.
Solution:
if hdmiin is unsatble, set default resample to 48K
Verify:
X301 T972
Change-Id: I31acc38772006646176092968eb23628e23dbaf7
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Zhe Wang [Mon, 5 Aug 2019 12:15:42 +0000 (20:15 +0800)]
audio: disable some audio print messages for ATV str test [1/1]
PD#TV-8460
Problem:
ATV str test is stucked
Solution:
disable some audio print messages
Verify:
Verfied on marconi
Change-Id: I284c8afde3a6bc9ff3b8ebfe19360abbb152c3f8
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Yan Wang [Wed, 12 Jun 2019 08:19:17 +0000 (16:19 +0800)]
pixel_probe: tl1 add pixel probe control for debug [1/1]
PD#SWPL-9137
Problem:
tl1 add APIs to control pixel probe for debug
Solution:
tl1 add APIs to control pixel probe for debug
Verify:
X301
this commit MUST not be merged into trunk!!!
Change-Id: I3a538ff3afdd80ef5669fac63a3ab5f43b8e1055
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Xihai Zhu [Mon, 19 Aug 2019 06:53:26 +0000 (02:53 -0400)]
amvecm: further improvement for LC block artifect [1/2]
PD#SWPL-12867
Problem:
after some swtich or on/off operation, minor block
artifect is seen under super black pattern
Solution:
improve the temporal filter calculation and fine tune
related parameter as well
Verify:
TL1
Change-Id: If52360e458934d71438899b88d9246f1279ce524
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Jian Hu [Mon, 19 Aug 2019 11:59:48 +0000 (19:59 +0800)]
clk: tl1: add CLK_IGNORE_UNUSED flag for tcon clock [1/1]
PD#SWPL-12922
Problem:
the lcd display abnormal
Solution:
do not disable tcon clock,add
CLK_IGNORE_UNUSED flag for tcon clock
Verify:
tl1
Change-Id: If2ac02670c58a21604ce2a36ae353ceddd5ecae5
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Yong Qin [Thu, 15 Aug 2019 02:35:09 +0000 (10:35 +0800)]
tvafe: adc pll FRQ can't over 4.8Ghz [1/1]
PD#SWPL-12753, PD#TV-8736
Problem:
ft had change the Max range to 4.8G, so adc pll can't
over than 4.8 Ghz.
Solution:
modify pll default setting
Verify:
tl1
Change-Id: I9f489300762f653f967e8c2219c79882236062ab
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Yong Qin [Wed, 14 Aug 2019 10:16:41 +0000 (18:16 +0800)]
cec: for sm1 support ARC [1/1]
PD#SWPL-12148
Problem:
no output config
Solution:
sm1 dts add output config
Verify:
sm1
Change-Id: Ie431b5e485c5ad199d2840070dbf940ff88912c0
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Jihong Sui [Mon, 5 Aug 2019 06:17:07 +0000 (14:17 +0800)]
deinterlace: add di-multi folder v2 [2/3]
PD#SWPL-10064
Problem:
add di-multi folder
Solution:
1. add di_multi folder;
2. it can be enable by dts;
3. only one of di can be enabled at the same time;
4. no di-pq filse;
Verify:
U212
Change-Id: I8726d2430cf1beb58d0cd37c0358b7ea8e06c414
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
nengwen.chen [Thu, 1 Aug 2019 02:40:47 +0000 (10:40 +0800)]
atv_demod: fix non-standard signal [1/1]
PD#TV-7783
Problem:
fix non-standard signal.
Solution:
1.fix non-standard signal when channel scanning and playing.
2.disable demod afc when enable non standard.
Verify:
Verified by x301
Change-Id: I177e6eb5388e554e3166a65e23e3b7bdefac3e97
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
nengwen.chen [Tue, 13 Aug 2019 06:50:03 +0000 (14:50 +0800)]
atv_demod: fixed null pointer when atv channel searching [1/1]
PD#TV-8777
Problem:
fixed null pointer when atv chennel searching.
Solution:
1.fixed null pointer when atv channel searching.
Verify:
Verified by x301 and t972.
Change-Id: I3622d42f6a8dee634c601660b43e9dd9ba93c29d
Signed-off-by: nengwen.chen <nengwen.chen@amlogic.com>
Sunny Luo [Mon, 12 Aug 2019 05:04:33 +0000 (13:04 +0800)]
spi nor: spicc: change to use spicc to access spi nor [1/1]
PD#TV-8401
Problem:
Customer needs to access spi nor by the spicc.
Solution:
add spi nor interfaces in spicc driver.
add gd25q80c/FM25Q08A surpport
Verify:
tl1 x301
Change-Id: If94858d46c31fea6b37034a8b1dfe94a9e9f4603
Signed-off-by: Sunny Luo <sunny.luo@amlogic.com>
Xihai Zhu [Thu, 1 Aug 2019 07:33:13 +0000 (03:33 -0400)]
amvecm: fix LC super white/black pattern issue [1/2]
PD#SWPL-12142
Problem:
signal level of 107% block of super white/black pattern
diff via enable/disable LC
Solution:
it is special limit range pattern but some pixels
value > 235, use full range matrix to avoid clipping,
this is per VLSI'e suggestion
Verify:
tl1
Change-Id: I82d26105a2404218b0c575a578874f88ae75d6c9
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Hanjie Lin [Fri, 26 Jul 2019 12:35:53 +0000 (20:35 +0800)]
perf_event: fix pmu deadlock issue [1/1]
PD#SWPL-3088
Problem:
smp_call_function_single() may cause deadlock.
Solution:
modify
Verify:
u200 w400
Change-Id: I86e9f67ed292245c5fe649e6750a6a406261552f
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
MingLiang Dong [Fri, 9 Aug 2019 10:32:44 +0000 (06:32 -0400)]
hdr: optimize hdr2sdr config [1/1]
PD#SWPL-12515
Problem:
hdr video is dark compared with sdr video
Solution:
1. optimize hdr2sdr oo gain
2. fix hdr2sdr shift
Verify:
verify on TL1
Change-Id: I42cbe7bf2c05c610f25ec34fe00cb4a2b1f7b8a6
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jihong Sui [Fri, 16 Aug 2019 02:55:48 +0000 (10:55 +0800)]
deinterlace: add condition for recycle mirror buf [1/1]
PD#SWPL-11555
Problem:
there is jaggy in the seek process
Solution:
add condition for recycle mirror buf
Verify:
TL1
Change-Id: I13c17fd78386ef2cb5f44b4e8c33be3fa92e31e2
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Jihong Sui [Mon, 5 Aug 2019 05:33:34 +0000 (13:33 +0800)]
deinterlace: add di-multi v2 [1/3]
PD#SWPL-10064
Problem:
Prepare for adding multi-di
Solution:
1. add di_local for reserved mem alloc;
2. add dil_attach_ext_api for di_api;
3. move some setting to prob;
4. add interface for di pq;
Verify:
U212
Change-Id: I023694dffabed47fd62ec3fa90b8de9302ac341e
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
yicheng shen [Fri, 19 Jul 2019 09:13:44 +0000 (05:13 -0400)]
hdmirx: optimize the communication method with hdcp_rx22 [1/3]
PD#SWPL-2564
Problem:
hdcp_rx22 ocupy too much CPU resources
Solution:
1.Optimize hdcp_rx22 polling method
2.The driver code should match the hdcp_rx22 whose version is
HDCP2.2 RX0719
Verify:
Android P
Change-Id: I4e1ab48d4eb3b74de070a36cd719c67370f26505
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
yicheng shen [Thu, 8 Aug 2019 07:27:13 +0000 (03:27 -0400)]
hdmirx: update eARC port and 5V high or low status to audio [1/1]
PD#SWPL-12446
Problem:
Need update eARC port and 5V high or low status to audio
Solution:
update eARC port and 5V high or low status to audio
Verify:
TM2
Change-Id: Ie9891e045010e2020aa9ec64922f2810f6a0cb18
Signed-off-by: yicheng shen <yicheng.shen@amlogic.com>
Qianggui Song [Tue, 25 Jun 2019 02:44:29 +0000 (10:44 +0800)]
ir: remove irq affinity in hard decode mode [1/1]
PD#SWPL-9797
Problem:
ir irq is binded to cup 1 and will re-set in every resume process.
cup 0 wakeup first in resume, if there comes a irq during resume in
a critical time it may occurs concurrency.
Solution:
remove irq affinity in hard decode mode and only use it in learning
mode.
Verify:
w400
Change-Id: I26fad9f67665a2bfe9c6d2455559eb1d95e8b2ba
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Qianggui Song [Fri, 9 Aug 2019 07:53:05 +0000 (15:53 +0800)]
ir: fix mem leak issue when probe [1/1]
PD#SWPL-12483
Problem:
during probe stage, some unused mems are not be freed.
Solution:
free mem after using.
Verify:
gxl_p212
Change-Id: I24a91d81f0db9fb1edbab8f63b4e8c7f940d5947
Signed-off-by: Qianggui Song <qianggui.song@amlogic.com>
Yong Qin [Thu, 15 Aug 2019 11:41:43 +0000 (19:41 +0800)]
tvafe: atv black screen [1/1]
Revert "tvafe: Reg access protection [1/1]"
This reverts commit
8b95c783b4c444dc97c256f3d762b69846ffce49.
Change-Id: I113bb6708e07454c8d59ba1d0f89c9f8b43e686f
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Zongdong Jiao [Thu, 15 Aug 2019 07:43:40 +0000 (15:43 +0800)]
hdmitx: parsing basic audio [1/1]
PD#SWPL-12779
Problem:
For some RX, the audio block of its EDID contains other audio
type(eg. DD), without PCM.
Solution:
Check the parsed EDID data, add default PCM type
when it contains other audio type w/o PCM.
Verify:
G12/U212
Change-Id: Ia343149ffd4e73970fd76c08a5fde4ee1fe78656
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Evoke Zhang [Mon, 29 Jul 2019 07:56:45 +0000 (15:56 +0800)]
tvafe: add more parameters for fine tune non-std signal [1/1]
PD#TV-7783
Problem:
some non-std signal is not stable
Solution:
add more parameters for fine tune non-std signal
Verify:
x301
Change-Id: I926833778569c4aa3a6eae45224a46eae97f3dcf
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Fri, 9 Aug 2019 05:11:56 +0000 (13:11 +0800)]
tvafe: add pq reg trust list protection [1/1]
PD#SWPL-12475
Problem:
sometimes pq reg wrong value will cause tvafe working abnormal
Solution:
add pq reg trust list protection
Verify:
x301
Change-Id: Ie498fec7a890c8eb2f4a7af660cef70c8da247dd
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Tue, 13 Aug 2019 03:28:27 +0000 (11:28 +0800)]
lcd: fix special clk mistake for vbyone [2/2]
PD#SWPL-12609
Problem:
clk calculation mistake when use some special clk for vbyone
Solution:
fix special clk mistake for vbyone
Verify:
x301
Change-Id: If639f02a6ad9d3adeb87f46e3bb0e454e1148075
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Zongdong Jiao [Thu, 11 Jul 2019 06:54:57 +0000 (14:54 +0800)]
hdmitx: remove a wrong hdcp control [1/1]
PD#SWPL-12775
Problem:
HDCP1.4 special test failed with analyzer (VA-1842)
Solution:
Remove a wrong hdcp control
Verify:
G12/U212
Change-Id: Ic17a8ee0cea4f7ec7cde992a74329385b0cac65a
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Yong Qin [Mon, 5 Aug 2019 08:16:14 +0000 (16:16 +0800)]
tvafe: Reg access protection [1/1]
PD#TV-8258
Problem:
sometime tvafe reg is access after tvafe disabled,
cause system panic
Solution:
1.add reg access protection
2.hook function add protection condition
Verify:
x301
Change-Id: I331a3e9cd10ee2ba14d0f3c0768ce1df7e23c2f9
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
zhiwei.yuan [Mon, 12 Aug 2019 10:41:40 +0000 (18:41 +0800)]
vdin: hdmi in 1080i,game mode shakes seriously [1/1]
PD#SWPL-9795
Problem:
field top/bottom is inverted in game mode
Solution:
invert top/bottom in game mode 2
Verify:
verified by t962x2_x301
Change-Id: If4eafef9d422a5ba1062a0e398741efcb21266f2
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Gongwei Chen [Wed, 14 Aug 2019 11:33:32 +0000 (19:33 +0800)]
dts: add ac214 [1/2]
PD#SWPL-12710
Problem:
add ac214
Solution:
add ac214 dts
Verify:
Verify by Android P ac214
Change-Id: I24890bce6506331bdb9d8dbe21e5697c334ffc3c
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
yao liu [Wed, 14 Aug 2019 08:34:49 +0000 (04:34 -0400)]
dolby: Display flickers with garbage image [1/1]
PD#OTT-5577
Problem:
when scale down, scaler+dolby h-timing too tight
Solution:
reduce htotal_add to 0xc0 when 4k output
Verify:
u212
Change-Id: I190ec235370d9ed75f9c1f477c1419c383b0a8e7
Signed-off-by: yao liu <yao.liu@amlogic.com>
huijie.huang [Tue, 6 Aug 2019 09:30:04 +0000 (17:30 +0800)]
s905y3: ac223 bring up and power optimization [3/3]
PD#SWPL-12395
Problem:
S905Y3 AC223 bring up & power optimization
Solution:
1. kernel add AC223 board support
2. limit cpu to 1.5GHz
3. limit gpu to 500MHz
4. set hdmitx to dongle power save mode
Verify:
AC223
Change-Id: I0bb219b6ea1b924525d9c1d364666782e3371556
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
huijie.huang [Tue, 13 Aug 2019 03:24:01 +0000 (11:24 +0800)]
dts: tm2 32bit version fix wifi cannot use [1/1]
PD#TV-8700
Problem:
TM2 32bit kernel wifi cannot use
Solution:
change wifi config in dts
Verify:
T962X3-AB301
Change-Id: Iabd2d5aa1b57d8f6fc46e68ca926452be5b8f6b4
Signed-off-by: huijie.huang <huijie.huang@amlogic.com>
Ruixuan Li [Tue, 13 Aug 2019 07:25:13 +0000 (15:25 +0800)]
emmc: run hs400 200M busmode on tl1 [1/1]
PD#SWPL-11266
Problem:
the emmc clock source is 792M, the emmc speed
should be 198M
Solution:
modify dts from 200M to 198M
Verify:
passed on tl1_t962x2_x301
Change-Id: I9baf345db06039c5df8f5b7714a8fbb6e0143b68
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
Hong Guo [Mon, 29 Jul 2019 11:37:39 +0000 (19:37 +0800)]
dts: update s905x3 vddcpu pwm to 30 steps [1/1]
PD#SWPL-11792
Problem:
update s905x3 vddcpu pwm to 30 steps
Solution:
update s905x3 vddcpu pwm to 30 steps
Verify:
test pass on S905X3_AC213
Change-Id: I30bfe855e3bb0a4b0a33f6d9029a718b7de68829
Signed-off-by: Hong Guo <hong.guo@amlogic.com>
jian.zhou [Tue, 13 Aug 2019 08:12:29 +0000 (04:12 -0400)]
audio: fix the sound phase is invert in speaker output [1/1]
PD#SWPL-7679
Problem:
the sound phase is invert in speaker output
Solution:
PWMR_X need match 1:No exchanged
Verify:
T962E2 AB311
Change-Id: Ib1720b6418ead08617f66b090783bab27e1d347e
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
Xihai Zhu [Mon, 12 Aug 2019 04:03:31 +0000 (00:03 -0400)]
amvecm: disable LC single peak curve patch [1/2]
PD#SWPL-12343
Problem:
patch for single peak curve is not really needed
Solution:
implement the curve by tunning parameters
also fix the tempor filter calculation issue causing
unexpected curve
Verify:
tl1
Change-Id: Ib338d8f54137c0dfe8f5a641037a4e77d2156b0a
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Evoke Zhang [Tue, 6 Aug 2019 11:31:32 +0000 (19:31 +0800)]
tvafe: optimize DADC stability for tl1 [1/1]
PD#SWPL-12474
Problem:
sometime demod adc fail
Solution:
optimize DADC stability
Verify:
x301
Change-Id: I2202e4a11a9095ff79c0dd3f2afa1600d0e4e2df
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
shaochan.liu [Thu, 8 Aug 2019 04:16:31 +0000 (12:16 +0800)]
lcd: add lvds phy pull down sequence to avoid 1.8V power on pluse [2/2]
PD#SWPL-9313
Problem:
need add lvds phy pull down sequence
Solution:
add lvds phy pull down sequence
Verify:
t962x2_x301
Change-Id: Id8725bfe4de99afed14fee956dc3be3f73e72220
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Jihong Sui [Fri, 9 Aug 2019 06:43:35 +0000 (14:43 +0800)]
deinterlace: disable afbc for tl1/tm2 [1/1]
PD#TV-8024
Problem:
abnormal display in small window.
Solution:
turn off afbc temporary.
Verify:
tl1
Change-Id: I6f863330ed9261ef00b0d1c7bdeaa341a9aaa2ca
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
zhiwei.yuan [Fri, 9 Aug 2019 08:10:36 +0000 (16:10 +0800)]
dtv_demod: tl1 DTMB, 674M frequency, not searchable [1/1]
PD#SWPL-12576
Problem:
dmd & dmx ts can't be synced
Solution:
change dmd ts sync to "searched"
Verify:
verified by t962x2_x301
Change-Id: I75014f746456b1dc8c7ffc57b98c92f5d001a6ec
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
cancan.chang [Tue, 13 Aug 2019 03:30:13 +0000 (11:30 +0800)]
galcore: resolve the conflict between usb module and nn module [1/1]
PD#SH-986
Problem:
nn module and usb module confilct
Solution:
add a label in galcore
Verify:
w411
Change-Id: I11c0c7ea3c8ce251a4dc937d76085c75d267372d
Signed-off-by: "cancan.chang" <cancan.chang@amlogic.com>
xianjun.liu [Wed, 26 Jun 2019 08:42:23 +0000 (16:42 +0800)]
mtd: nand: support new slc nand [2/2]
PD#SWPL-10125
Problem:
2Gb SLC Nand GD9FU2G8F2AMGI requested by Marketing
Solution:
add the nand id into amlogic nand flash id table
Verify:
AXG_S400
Change-Id: I0ebaa8322d471af7c01857ed2b39046917aad7ab
Signed-off-by: xianjun.liu <xianjun.liu@amlogic.com>
cancan.chang [Thu, 8 Aug 2019 04:46:00 +0000 (12:46 +0800)]
galcore: resolve the conflict between usb module and nn module [1/1]
PD#SH-986
Problem:
nn module and usb module confilct
Solution:
add a label in galcore
Verify:
s905d3 w400
Change-Id: I3f5b8738aa8924c7a292fc1da6dda1d2002a77ae
Signed-off-by: "cancan.chang" <cancan.chang@amlogic.com>
Evoke Zhang [Thu, 8 Aug 2019 11:02:26 +0000 (19:02 +0800)]
tvafe: optimize avin NTSC Purple and green junctions display for tl1 [1/1]
PD#SWPL-8326
Problem:
Purple and green junctions the bright side is wider
Solution:
change UV_FILTER_TYPE setting
Verify:
x301
Change-Id: Ib42f311b637f0bbf8224adbb19105f728adfad88
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
lingjie li [Mon, 5 Aug 2019 07:50:39 +0000 (15:50 +0800)]
DTS: Change p212_tdk to wayland+drm [1/2]
PD#SWPL-12278
Problem:
Need change p212_tdk to wayland+drm
Solution:
modify the dts to enable drm.
Verify:
local p212
Change-Id: I642ef0495933de7a1daa34554c8fea27fab2ec09
Signed-off-by: lingjie li <lingjie.li@amlogic.com>
Cheng Wang [Thu, 1 Aug 2019 07:53:18 +0000 (15:53 +0800)]
amvecm: DNLP enable/disable abnormal [1/1]
PD#SWPL-10799
Problem:
dnlp enable effect is the same with disable.
Solution:
refresh vframe
Verify:
on x301
Change-Id: Ic133e10aa1faa5a6838dd05afc9e350498b01892
Signed-off-by: Cheng Wang <cheng.wang@amlogic.com>
Kai Song [Thu, 28 Feb 2019 07:48:06 +0000 (15:48 +0800)]
dvb: Enable dvb demux support for ampere and franklin platform. [1/1]
PD#SWPL-11209
Problem:
1.Need support widevineCAS with drmplayer.
2.The ampere and franklin debugging platforms do not
support dvb demux by default, we need to modify the dts
configuration files.
Solution:
1.Refer to http://scgit.amlogic.com:8080/#/c/59242/
2.Refer to http://scgit.amlogic.com:8080/#/c/59702/3
3.Enable dvb demux support for ampere and franklin platform (arch/arm).
Verify:
Verified by ampere & franklin with android-p.
Change-Id: I0eb9393439b532f88beaf33479bb88da1ef5ea31
Signed-off-by: Kai Song <kai.song@amlogic.com>
shihong.zheng [Sun, 4 Aug 2019 06:54:05 +0000 (14:54 +0800)]
amstream: add dec crc interface in amstream. [1/3]
PD#OPS-679
Problem:
add decoder slt test code.
Solution:
add crc check interlace in amstream.
Verify:
x301
Change-Id: Ie7c82140bc4e1fa4c470d0e133a12afee14d9ca8
Signed-off-by: shihong.zheng <shihong.zheng@amlogic.com>
Shuai Li [Thu, 8 Aug 2019 08:17:32 +0000 (16:17 +0800)]
audio: add enable count for PDM module [1/1]
PD#IPTV-3723
Problem:
One use case is PDM module is sendig data
to both PDM device and LOOPBACK device.
Close one will make another useless.
Solution:
Add management of the PDM module by
a enable count.
Verify:
SM1.
Change-Id: Iceeb756c02671b16dbc3c49a9b793a50e6e559b5
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
MingLiang Dong [Mon, 5 Aug 2019 11:16:32 +0000 (07:16 -0400)]
hdr: fix hdr too dark [1/1]
PD#SWPL-12292
Problem:
hdr video is too dark
Solution:
correct hdr adps shift
Verify:
verify on TM2
Change-Id: Iabd91d7b5910384c7de34596c3804b07b6eaf203
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Guosong Zhou [Tue, 6 Aug 2019 06:32:20 +0000 (02:32 -0400)]
camera: fix take picture stuck when camera recording [1/1]
PD#SWPL-12300
Problem:
gc2145 mipi camera take picture will stuck when recording
Solution:
add the right size to picture array
Verify:
verify on S905D3
Change-Id: Iee797d59053050d41448fda601a3bd7226cf9f37
Signed-off-by: Guosong Zhou <guosong.zhou@amlogic.com>
zhiwei.yuan [Wed, 7 Aug 2019 07:45:40 +0000 (15:45 +0800)]
dtv_demod: C/N and three-path performane isn't up to std [1/1]
PD#SWPL-12431
Problem:
fec lost lock is too slower
Solution:
delay fec lock & make fec lost faster
Verify:
verified by t962x2_x301
Change-Id: I00de0a0c764f2fa598a867297acc0d90beddf188
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
Pengcheng Chen [Wed, 31 Jul 2019 06:22:19 +0000 (14:22 +0800)]
hdr: fix cvbsout display green screen [1/1]
PD#SWPL-11964
Problem:
cvbsout display green screen
Solution:
add mtx_setting in video_post_process
Verify:
tm2 ab301
Change-Id: I6de1b4aeb08583a67f20317ee4ac6b3bc577d03b
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Zongdong Jiao [Sat, 27 Jul 2019 09:58:38 +0000 (17:58 +0800)]
hdmitx: update phy parameters [2/2]
PD#OTT-5448
Problem:
need update phy parameters
Solution:
regress raven parameters to trunk
Verify:
g12/u212
Change-Id: I84149dd900b584c209dd052e22b6dc60162e6c16
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Jihong Sui [Tue, 6 Aug 2019 09:57:09 +0000 (17:57 +0800)]
deinterlace: reduce working frequency to 500M for tl1 [1/1]
PD#SWPL-12359
Problem:
Reduce DI's working frequency from 667 to 500 for tl1,
according to brian's suggestion.
to avoid affecting output.
Solution:
change dts's cfg
Verify:
x301
Change-Id: I6506f6a222cfe30f478902033349e48c9c678c59
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
Cao Jian [Tue, 6 Aug 2019 13:27:24 +0000 (21:27 +0800)]
picdec: fix no scale support [1/1]
PD#TV-8145
Problem:
no scale display issue for picdec
Solution:
p2p_mode can be set to 1 to support no scale
Verify:
verified on g12b-w400
Change-Id: I2121bb39019675da78e626bb6cf40bf51486c765
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
jian.zhou [Tue, 6 Aug 2019 11:33:19 +0000 (07:33 -0400)]
audio: fixed the WARNING caused by audio driver [1/1]
PD#SWPL-12161
Problem:
Power on the DUT, look at the printing log,
it will prompt WARNING:gpio/gpiolib.c:106
Solution:
when get gpio below 0,
no need to call devm_gpio_request_one function
as 2
ad82584f use the same gpio
Verify:
T962E2 AB311
Change-Id: Iad8ded3a8a0e94229281aa50462b7c09c627a70f
Signed-off-by: jian.zhou <jian.zhou@amlogic.com>
Xihai Zhu [Wed, 7 Aug 2019 04:00:01 +0000 (00:00 -0400)]
amvecm: fix LC illegal mem access issue [1/1]
PD#SWPL-12386
Problem:
LC access illegal mem while system shutdown
Solution:
avoid such accessing after mem is freed
Verify:
tl1
Change-Id: Ia817c5054ce863403ea4301c1728e16c4c033986
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Ruixuan Li [Tue, 23 Jul 2019 06:44:53 +0000 (14:44 +0800)]
emmc: run hs400 200M busmode on tl1 [1/1]
PD#SWPL-11266
Problem:
tl1 is running hs200 200M
Solution:
modify dts
Verify:
passed on tl1_t962x2_x301
Change-Id: Ib515d62e92564bb71980bb8122de7dc54a89a2fb
Signed-off-by: Ruixuan Li <ruixuan.li@amlogic.com>
MingLiang Dong [Thu, 18 Jul 2019 09:26:25 +0000 (05:26 -0400)]
amvecm: add pulldown combing fix patch [2/2]
PD#SWPL-11389
Problem:
1080i input, there is combing when detect pulldown
Solution:
1. di add pulldown detect
2. amvecm set dejaggy according to pulldown detect
Verify:
verify on TL1
Change-Id: I146666b19ab393d610e66e9cb450b74b185f76e1
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Jihong Sui [Wed, 17 Jul 2019 07:15:44 +0000 (15:15 +0800)]
deinterlace: add pulldown info to vframe. [1/2]
PD#SWPL-11389
Problem:
PQ need work around for 1080i(based on VLSI's suggestions)
co-work with yanling/mingliang
Solution:
add pulldown information to vframe;
u32 di_pulldown:
-bit 3: interlace
-bit 2: flmxx
-bit 1: flm22
-bit 0: flm32
Verify:
TL1
Change-Id: I9ff06ffa7aaa9516a3e64cec9768272499678fd5
Signed-off-by: Jihong Sui <jihong.sui@amlogic.com>
shaochan.liu [Mon, 5 Aug 2019 11:20:10 +0000 (19:20 +0800)]
lcd: update hw_filter_time bypass config [1/1]
PD#SWPL-8848
Problem:
need update compatible filter bypass config
Solution:
update compatible filter bypass config
Verify:
t962x2_x301
Change-Id: I29a9642f2524da5106da8de78d99a9d4ceeeb0c8
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Xihai Zhu [Mon, 5 Aug 2019 01:57:24 +0000 (21:57 -0400)]
amvecm: support 9 color CM [1/1]
PD#SWPL-11788
Problem:
customer require 9 color adjustment
Solution:
expand currently 7 color to 9 color
based on FAE's info
Verify:
tl1
Change-Id: Id5dcc01b955ffb461d6fa01efdc16bff92822729
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Evoke Zhang [Thu, 25 Jul 2019 07:22:58 +0000 (15:22 +0800)]
tvafe: add tvafe_mode to separate avt playing or search [1/1]
PD#TV-8035
Problem:
snowflake display is not stable when no signal
Solution:
separate avt playing or search
Verify:
x301
Change-Id: I4364d4af533704074a74e7d3b9522df461233f48
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Evoke Zhang [Fri, 5 Jul 2019 07:26:58 +0000 (15:26 +0800)]
tvafe: optimize avin ntsc_m, pal_m and secam display [1/1]
PD#SWPL-12091
Problem:
COLOR BAR+CROSS+DOT pattern is not good under avin ntsc_m
Solution:
update cvd 0xb2, 0xb5 reg for ntsc_m, pal_m, secam
Verify:
x301
Change-Id: I1610165689321d7cc60b883a4e44e86a6c352f18
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Shuai Li [Wed, 31 Jul 2019 11:25:39 +0000 (19:25 +0800)]
audio: SM1 tdmouta gated by earc [1/1]
PD#IPTV-3732
Problem:
TMDOUTA is gated by earc clk gate.
There is a bug in sm1 clk gating.
Solution:
Fix the wrong map of clk mapping.
Verify:
SM1.
Change-Id: Ia395d3307c249ef0cd64b715bb936dea3e2925ac
Signed-off-by: Shuai Li <shuai.li@amlogic.com>
Brian Zhu [Fri, 2 Aug 2019 17:58:29 +0000 (01:58 +0800)]
vpp: sr: disable more latch ctrl for SR0 [1/1]
PD#TV-7673
Problem:
SR0 register enabled the latch function, it will cause
frame size setting out of sync when bypass sr0.
Solution:
Disable the latch option.
Verify:
Verified with X301
Change-Id: Ibfc4c5f8f695757ddd7d7d9e50e4b5be23268388
Signed-off-by: Brian Zhu <brian.zhu@amlogic.com>
Cao Jian [Mon, 29 Jul 2019 07:10:03 +0000 (15:10 +0800)]
dolby: add limitation check for crc_output_buff_off [1/1]
PD#OTT-5433
Problem:
potential kernel memory diclosure in amdolby_vision
due to race condition on crc_output_buff_off
Solution:
add length check for crc_output_buff_off
Verify:
Verfied on raven
Change-Id: I1d7a445ea7972276d3975f8ccc36b186ef8736e3
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Xihai Zhu [Wed, 10 Jul 2019 01:50:40 +0000 (21:50 -0400)]
vdin: add bin info to vdin1 histogram dump [1/1]
PD#SWPL-11289
Problem:
bin data is missing from vdin1 histogram
Solution:
have histogram bin data copied
Verify:
TL1
Change-Id: I080448b2278e265d7a1649fb57fd6aacc0e6e576
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Yong Qin [Fri, 2 Aug 2019 09:24:43 +0000 (17:24 +0800)]
vdin: hdmi 422 mode vdin set 10bit [1/1]
PD#SWPL-12219
Problem:
HDMI 422 mode, 8 or 10 bit valid is unknown.
when 10bit valid, there will cause PQ problem
Solution:
HDMI 422 mode vdin set 10bit
Verify:
tl1
Change-Id: Iaee6545dfe3ebbb92a23d23515509c8e8a053a91
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Long Yu [Thu, 1 Aug 2019 08:08:29 +0000 (16:08 +0800)]
emmc: Fixed adj mode for HS200 uses 1G clock source [1/1]
PD#SWPL-12162
Problem:
1)no use 1G source clock
Solution:
1)use 1G
Verify:
TL1
Change-Id: I4bf9036cb8223e9adf865c9cbdc64a8f6031ec05
Signed-off-by: Long Yu <long.yu@amlogic.com>
MingLiang Dong [Tue, 9 Jul 2019 03:21:03 +0000 (23:21 -0400)]
pq: add pq demo interface [1/1]
PD#TV-7491
Problem:
pq demo function
Solution:
add pq demo interface
Verify:
verify on TL1
Change-Id: If53fbba5f59a278394f71420e5cdc9c481abc0f7
Signed-off-by: MingLiang Dong <mingliang.dong@amlogic.com>
Long Yu [Mon, 5 Aug 2019 03:10:08 +0000 (11:10 +0800)]
emmc: Set a flag when all sampling points are valid [1/1]
PD#SWPL-12209
Problem:
fixed SWPL-11917
When all the sample points are valid,
they fall into the changes of 111917
Solution:
flag is set when all sampling points are valid
so tuning does not enter the changes of 11197
Verify:
txlx
Change-Id: I591993f3007db913b0030b108dcb18c304bf1042
Signed-off-by: Long Yu <long.yu@amlogic.com>
yao liu [Thu, 1 Aug 2019 07:35:10 +0000 (03:35 -0400)]
Dolby: Metadata Conformance test mismatch [1/1]
PD#SWPL-11390
Problem:
No 227/228/229/230 fail
Solution:
1.Set video priotiry, to prevent num_ext_blocks is set to 0
2.Turn off osd, to make gmax=gmin=0
3.Update md_tool.exe to version 0.4.1
4.Add padding data 0 to 512 bytes for metadata
By the way, fix some coverity check error
Verify:
sm1
Change-Id: I316e33bac3d84bb3bd7763031c28b33cfe7762ac
Signed-off-by: yao liu <yao.liu@amlogic.com>
Zhe Wang [Wed, 31 Jul 2019 02:13:26 +0000 (10:13 +0800)]
audio: when audio hdmirx is unstable, mute all input buffer [1/2]
PD#SWPL-12104
Problem:
when hdmirx timing switching, pop noise.
Solution:
when audio hdmirx is unstable, mute all input buffer
Verify:
T962x2 x301
Change-Id: I594b5bf9c1f4af45bb3653a7bfef5e0c7dab2825
Signed-off-by: Zhe Wang <Zhe.Wang@amlogic.com>
Evoke Zhang [Mon, 5 Aug 2019 02:15:43 +0000 (10:15 +0800)]
tvafe: optimize atv pali grayscale high-order saturation [1/1]
PD#TV-7291
Problem:
ATV source limit eight grayscale high-order saturation
Solution:
change agc_peak_nominal 0x10=0x8
Verify:
x301
Change-Id: I93c2257e3366b69d59e1b9f89ce0ed7f63e661ed
Signed-off-by: Evoke Zhang <evoke.zhang@amlogic.com>
Hang Cheng [Fri, 5 Jul 2019 08:29:59 +0000 (16:29 +0800)]
hdmirx: pull hpd low when cec auto power on is disabled [2/3]
PD#TV-7049
Problem:
hpd keeps high when cec auto power on disabled, not
match the requirement of CVTE hotplug function test
Solution:
pull hpd low when cec auto power on is disabled
Verify:
tl1
Change-Id: I7ab885894585b62d76f5dad8cdcbec9d754ef274
Signed-off-by: Hang Cheng <hang.cheng@amlogic.com>
zhiwei.yuan [Thu, 25 Jul 2019 08:52:37 +0000 (16:52 +0800)]
vdin: cvbs vsync + 3Hz,picture shakes [1/1]
PD#SWPL-11923
Problem:
input vsync frequence is faster than output
Solution:
drop 2 fields for interlace source.
Verify:
verified by t962x2_x301
Change-Id: I55f6154e9f85a9890669fa8951a8608555b912ba
Signed-off-by: zhiwei.yuan <zhiwei.yuan@amlogic.com>
shaochan.liu [Fri, 26 Jul 2019 03:23:49 +0000 (11:23 +0800)]
lcd: set default hw_filter_time config [1/1]
PD#SWPL-8848
Problem:
need set a better compatible filter config
Solution:
set a better compatible filter config
Verify:
t962x2_x301
Change-Id: I298d22dff1185653ceac7e05633de3704b2fdb2f
Signed-off-by: shaochan.liu <shaochan.liu@amlogic.com>
Jiamin Ma [Sun, 4 Aug 2019 07:07:01 +0000 (15:07 +0800)]
DTS: fix compile warnings [1/1]
PD#SWPL-12245
Problem:
Warning (resets_property): Missing property '#reset-cells'
Solution:
Add #reset-cells to node clock-controller
Verify:
P212
Change-Id: I5bc01ab88774be2088764ee6fb0eb9a863894ca2
Signed-off-by: Jiamin Ma <jiamin.ma@amlogic.com>
Yong Qin [Mon, 29 Jul 2019 06:33:30 +0000 (14:33 +0800)]
vlock: cvbs out mode not enable vlock [1/1]
PD#SWPL-11885
Problem:
vlock changed the cvbs out FRQ
Solution:
VOUT_FR_ADJ_NONE cvbs out mode not support vlock
Verify:
TL1
Change-Id: Ic8891e4f63ae36839bc1c8b6c7b1552ad7bc0994
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
yao liu [Thu, 1 Aug 2019 06:52:53 +0000 (02:52 -0400)]
dolby: TM2 black screen on 4k60hz [1/1]
PD#SWPL-11431
Problem:
black screen on 4k60hz
display abnormal on 1080p24hz/1080i/576p/480p
Solution:
1.Adjust potch according to resolution
2.Add tm2 in is_graphics_output_off
3.Move osd sc to the back of core2
Verify:
Verified on TM2
Change-Id: Ida1b4a67b3a7233d3a03b0536d246a0bd677e90c
Signed-off-by: yao liu <yao.liu@amlogic.com>
Zongdong Jiao [Tue, 2 Jul 2019 06:23:38 +0000 (14:23 +0800)]
hdmitx: optimise the mode setting sequence [2/2]
PD#SWPL-10600
Problem:
When hdmitx output deep color modes (30 or 36 bits), the Hactive
may set wrong values, offset +1.
Solution:
Optimise the mode setting sequence: disable VENC, PHY configure,
core configure / reset, enable VENC
Verify:
G12B/W400
Change-Id: Id19b4441ccee3a7d3d81c3d55dbd9102762fe992
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Pengcheng Chen [Wed, 24 Jul 2019 08:18:17 +0000 (16:18 +0800)]
rdma: add rdma conflict check [1/1]
PD#SWPL-12134
Problem:
fix rdma write error caused display abnormal
Solution:
add rdma conflict check,correct rdma register error.
Verify:
verify on w400
Change-Id: I6a8866f517ed5b379729e348d34615c77553844a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Gongwei Chen [Fri, 2 Aug 2019 06:29:29 +0000 (14:29 +0800)]
dts: Multi-screen enable [2/3]
PD#SWPL-12213
Problem:
Multi-screen support.
Solution:
Display is blank when panel use the same clk with cvbs.
Verify:
1. Primary screen display with HDMI.
2. Extend screen display with panel.
3. Primary and extend screen can display the same UI or difference.
Change-Id: Id2189c32a8ee4bb0c1384352d91536c7310d5670
Signed-off-by: GongWei Chen <gongwei.chen@amlogic.com>
Bencheng Jing [Wed, 31 Jul 2019 09:48:48 +0000 (17:48 +0800)]
di: fix pulldown 22 enter slow patch from vlsi-LiuYanling [1/1]
PD#SWPL-12061
Problem:
film 22 detection threshold is high
Solution:
adjust the threshold lower
Verify:
sm1
Change-Id: I8e01e910b4a08aefdbde18fe1033bcb45e85b338
Signed-off-by: Bencheng Jing <bencheng.jing@amlogic.com>
Pengcheng Chen [Thu, 1 Aug 2019 08:16:24 +0000 (16:16 +0800)]
vpp: if vinfo mode is null or invalid, not update post2_matirx [1/1]
PD#SWPL-11561
Problem:
UI display abnormal when switch from sdr tv to dv tv,
issue happened when dv tv support hdr also, it first
switch to hdr mode, then switch agian to dv mode.
Solution:
if vinfo mode is null or invalid, not update post2_matirx
Verify:
Verify on sm1
Change-Id: I6cc87ae2d5569d66b312bf47508e626298f9f98a
Signed-off-by: Pengcheng Chen <pengcheng.chen@amlogic.com>
Yan Wang [Mon, 27 May 2019 06:56:47 +0000 (14:56 +0800)]
dolbyfw: axg: update for sonos dolby fw [1/1]
PD#SH-561
Problem:
sonos dolby fw request
Solution:
update critical data interface for dolby fw request;
compatible with trunk dolby fw.
Verify:
S400
Change-Id: Id20d9c9867f3e5de4ea5ca9bb260cbac152a99df
Signed-off-by: Yan Wang <yan.wang@amlogic.com>
Cao Jian [Tue, 30 Jul 2019 13:51:34 +0000 (21:51 +0800)]
osd: overflow on 4k src height/width left-shift [1/1]
PD#SWPL-10952
Problem:
osd for 4k native UI
Solution:
modify u32 to u64 for left-shift
Verify:
verified on g12b-w400
Change-Id: I9e98e3b5769d61132570f3f4bb1f47694cffde8f
Signed-off-by: Cao Jian <jian.cao@amlogic.com>
Xihai Zhu [Wed, 3 Jul 2019 11:47:12 +0000 (07:47 -0400)]
amvecm: add option for applying gamma [1/1]
PD#SWPL-11288
Problem:
we'd better provide the flexibility
for gamma applying protection
Solution:
add option to let user to choose
if the applying protection is needed
or not
Verify:
tl1
Change-Id: I3f215545c7921134a282571d7f734bb8b42d553e
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Jian Hu [Wed, 8 May 2019 11:52:28 +0000 (19:52 +0800)]
clk: tl1: add clk81 mux clock [1/1]
PD#SWPL-8215
Problem:
1.clk81 can not switch to 24M
2.fixed pll can set rate
call clk_prepare_enable to open it
call clk_disable_unprepare to close it
Solution:
1.add clk81 mux clock
2.change fixed pll callback Read only to R/W
Verify:
test passed on tm2 ab301
Change-Id: I426d4307f19647afcb0166a23c1988df1b504807
Signed-off-by: Jian Hu <jian.hu@amlogic.com>
Shunzhou Jiang [Thu, 14 Feb 2019 02:09:50 +0000 (10:09 +0800)]
clk: tl1: fix hifi clk can not work issue [1/1]
PD#SWPL-3825
Problem:
hifi clk can not work
Solution:
add hifi clk table
Verify:
X301
Change-Id: I89699e14077b9046900fec5665b76fb6bb4e080a
Signed-off-by: Shunzhou Jiang <shunzhou.jiang@amlogic.com>
Zongdong Jiao [Thu, 1 Aug 2019 06:43:18 +0000 (14:43 +0800)]
eARCrx: add hdmitx hpd notify [1/1]
PD#SWPL-6861
Problem:
Wrong val for init bandgap
Solution:
If PHY_CNTL0 is 0, then enable it, otherwise no need.
Verify:
SM1/AC200
Change-Id: I9e4a7bbe5d4b02cd8e9b2d5da87b4e572bdeb67e
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>
Yingyuan Zhu [Mon, 29 Jul 2019 06:54:57 +0000 (14:54 +0800)]
gpio_key: fix request gpio failed issue [1/1]
PD#SWPL-11929
Problem:
request gpio failed but the probe function continued
to execute successfully.
Solution:
add return value judgment.
Verify:
test pass on g12a
Change-Id: Iab04b8440a4ecb340d98baee7b1e0df5692739e7
Signed-off-by: Yingyuan Zhu <yingyuan.zhu@amlogic.com>
Yong Qin [Thu, 25 Jul 2019 06:18:52 +0000 (14:18 +0800)]
vdin: 1080p 444 10bit mode buffer size not right [1/1]
PD#TV-7702
Problem:
1.1080p 444 10bit mode, buffer size is not big enough.
alloc as 444 8bit mode.
2.4k afbc not support 10bit mode
Solution:
hdr mode 4k, disable afbc mode.
Verify:
tl1 ref board
Change-Id: I3284a5279c08f360faaeaaf4e6ab47a9008f0da6
Signed-off-by: Yong Qin <yong.qin@amlogic.com>
Xihai Zhu [Thu, 25 Jul 2019 06:28:36 +0000 (02:28 -0400)]
amvecm: fix LC noise under SD blue pattern [1/1]
PD#SWPL-11532
Problem:
blue raster pattern show heavy noise
under sd HDMI input
Solution:
it is cuased by incorrect color matrix
set matrix based on the signal type
Verify:
tl1
Change-Id: I36ae74fd0f7762d270c5ea908a817dabb9516d56
Signed-off-by: Xihai Zhu <xihai.zhu@amlogic.com>
Zongdong Jiao [Wed, 31 Jul 2019 07:30:56 +0000 (15:30 +0800)]
eARCrx: add hdmitx hpd notify [1/1]
PD#SWPL-6861
Problem:
Lack hdmitx hpd event notify to eARC
Solution:
Add hdmitx hpd event notify to eARC in HPD interrupt handler
w/o any delay.
Verify:
TBD
Change-Id: Ic7f35365a2af634dee604f7121d62738b4b17a8d
Signed-off-by: Zongdong Jiao <zongdong.jiao@amlogic.com>