arm64: dts: qcom: sm8350: Add wakeup-parent to tlmm

Now that TLMM has the wakeup table, specify the Power Domain Controller
to be the wakeup-parent of TLMM.

Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210312034218.3324410-2-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180:: modified qfprom CORR size as per RAW size

modified QFPROM controller CORRECTED region size as per RAW region size

Signed-off-by: Ravi Kumar Bokka <rbokka@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/1613582792-5225-1-git-send-email-rbokka@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: Fix epss_l3 unit address

The unit address of the epss_l3 node is incorrect and does not match
the address of its "reg" property. Let's fix it.

Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Sibi Sankar <sibis@codeaurora.org>
Link: https://lore.kernel.org/r/20210211193637.9737-1-georgi.djakov@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: Add gpu cooling support

Add cooling-cells property and cooling maps for the GPU.

Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/Ku7mRZ_q2mYDZQ048IPlAc8VOVhH8N4uENhMI-JXxjeiZxjbRRs40ZJYwREb_ScgCvtQgtdl1VRjoDd7CR_8vCrbWVe8n3MwyB1S3VbSDis=@protonmail.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm8004: Enable the PMIC peripherals by default

It makes no sense to require one more step to enable the PMIC features.
If the PMIC is present, it already has to be explicitly #included anyway.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210225213842.117694-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Drop qcom,mtp

qcom,mtp is used msm8916-mtp.dts but not documented, it is a generic mtp
compatible and we have specfifc ones for each mtp so drop this

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        ['qcom,msm8916-mtp', 'qcom,msm8916-mtp/1', 'qcom,msm8916', 'qcom,mtp'] is too long
        Additional items are not allowed ('qcom,msm8916', 'qcom,mtp' were unexpected)
        Additional items are not allowed ('qcom,mtp' was unexpected)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-8-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

dt-bindings: arm: qcom: Document alcatel,idol347 board

Document the alcatel,idol347 board. It was missing leading to warning:

arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dt.yaml: /: compatible: 'oneOf' conditional failed, one must be fixed:
        Additional items are not allowed ('qcom,msm8916' was unexpected)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-7-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: don't use underscore in node name

We have underscore (_) in node name leading to warning:

arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: $nodename:0: 'clocks' does not match '^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
arch/arm64/boot/dts/qcom/apq8096-db820c.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'clock-output-names': ['xo_board'], 'phandle': [[115]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-10-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8994: don't use underscore in node name

We have underscore (_) in node name leading to warning:
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: xo_board: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[19200000]], 'phandle': [[26]]}
arch/arm64/boot/dts/qcom/msm8994-msft-lumia-octagon-cityman.dt.yaml: clocks: sleep_clk: {'type': 'object'} is not allowed for {'compatible': ['fixed-clock'], '#clock-cells': [[0]], 'clock-frequency': [[32768]]}

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-9-vkoul@kernel.org
[bjorn: Added clock-output-names to satisfy parent_names]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: don't use underscore in node name

We have underscore (_) in node name so fix that up as well.

Fix this by changing node name to use dash (-)

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-11-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: ipq6018: drop '0x' from unit address

Nodes need not contain '0x' for the unit address. Drop it to fix the
below warning:

arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dt.yaml: reserved-memory:
'memory@0x60000' does not match any of the regexes

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-19-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm660: use reg value for memory node

memory node like other node should be node@reg, which is missing in this
case, so fix it up

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: /: memory: False schema does not allow {'device_type': ['memory'], 'reg': [[0, 1073741824, 0, 536870912]]}

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-18-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: ipq8074: fix pci node reg property

reg property should be array of values, here it is a single array,
leading to below warning:

arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:reg:0: [268435456, 3869, 268439328, 168, 557056, 8192, 269484032, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@10000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488]] is not of type 'null'
[2164260864, 0, 270532608, 270532608, 0, 1048576, 2181038080, 0, 271581184, 271581184, 0, 13631488] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:reg:0: [536870912, 3869, 536874784, 168, 524288, 8192, 537919488, 4096] is too long
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
arch/arm64/boot/dts/qcom/ipq8074-hk01.dt.yaml: soc: pci@20000000:ranges: 'oneOf' conditional failed, one must be fixed:
[[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488]] is not of type 'null'
[2164260864, 0, 538968064, 538968064, 0, 1048576, 2181038080, 0, 540016640, 540016640, 0, 13631488] is too long

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-17-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: don't use empty memory node

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-15-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8998: don't use empty memory node

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-14-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996: don't use empty memory node

We expect bootloader to full memory details but passing empty values
can give warning, so add a default value

Signed-off-by: Vinod Koul <vkoul@kernel.org>
Tested-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210308060826.3074234-13-vkoul@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm6125: Add support for Sony Xperia 10II

This commits add support for Sony Xperia 10II based on the SM6125 SoC.

Currently working features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- Volume down button

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-2-martin.botka@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add support for SM6125

This commits adds the Device tree file for SM6125 SoC.

Signed-off-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20210621195308.654587-1-martin.botka@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: Add DMA to I2C/SPI

Add dma properties to I2C and SPI nodes to make sure DMA transfers can go
through. While at it, fix up the property order in SPI nodes to make #address-
and #size-cells go after all the meaningful properties.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210615142249.170512-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm850-yoga: Enable IPA

Shuffle memory regions to make firmware loading succeed and then enable
the ipa device.

Tested-by: Steev Klimaszewski <steev@kali.org>
Link: https://lore.kernel.org/r/20210615232816.835325-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add DMA to I2C hosts

Add DMA properties to I2C hosts to allow for DMA transfers.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-40-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add I2C functions to I2C pins

This was overlooked earlier, fix it to ensure the busses can
work properly.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-39-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Remove gpio-keys autorepeat

The autorepeat feature is not needed on gpio-keys.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-38-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Enable uSD card slot

Enable the internal uSD slot to let the user have more storage.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-37-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Specify ADSP firmware name

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-36-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Add Synaptics touchscreen.

Delete the node on Ganges devices, as they use a different one.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-35-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-xperia: Retire sdm630-sony-xperia-ganges.dtsi

After further consideration, it is not worth to keep another
separate DTSI, as the differences between Nile and Ganges are
very minimal. Instead, let's just address the minimal differences
between Kirin and Mermaid.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-34-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Add Volume up key

Let's get loud!

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-33-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Add USB

Enable and configure DWC3 and QUSB2 PHY to enable USB
functionality on Nile and Ganges boards.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-32-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-nile: Use &labels

Refer to nodes by their labels to match the current
convention.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-31-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630-xperia-nile: Add all RPM and fixed regulators

Add all of the RPM PM660/PM660L regulators and the fixed ones,
defining the common electrical part of this platform.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-30-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm660: Add required nodes for DSI1

Configure the second DSI host/phy and account for them in
the mmcc node.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-29-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Configure the camera subsystem

Add nodes for camss, cci and its pinctrl in order to bring up
camera functionality.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-28-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add IMEM node

Add IMEM node and PIL reloc info as its child.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-27-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add device tree for SDM636

This SoC is almost identical to its older brother,
SDM660, with a few minor exceptions like the
different GPU.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-26-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm660: Make the DTS an overlay on top of 630

There is SO MUCH common code between these two SoCs that it makes
no sense to keep what is essentially a duplicate of 630.dtsi. Instead,
it's better to just change the things that differ.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-25-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm660(l): Add VADC and temp alarm nodes

Add VADC, temperature alarm and thermal zones for pm660(l)
to allow for temperature and voltage readouts and prevent
PMIC overheating.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-24-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm660l: Support SPMI regulators on PMIC sid 3

The PM660L PMIC has SPMI regulators on the PMIC SID 3: let's add
the compatible in order to probe them.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-23-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm660l: Add WLED support

This will enable backlight control on WLED-enabled devices.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-22-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: pm660: Support SPMI regulators on PMIC sid 1

The PM660 PMIC has SPMI regulators on the PMIC SID 1: let's
declare the second pmic subtree and add the spmi vregs compatible
to probe them there.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-21-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add Adreno 508 GPU configuration

The SDM630 SoC features an Adreno 508.0 GPU with a minimum frequency
of 160MHz and a maximum of (depending on the speed-bin) 775MHz.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-20-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Raise tcsr_mutex_regs size

Enlarge the size to make sure all relevant registers can be reached.
This will be required to support the modem.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-19-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add ADSP remoteproc configuration

Configure the ADSP remote processor and add a simple sound{}
node to make way for future development.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-18-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add thermal-zones configuration

Add a basic thermal-zones configuration to make sure the SoC
doesn't overheat itself to death.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-17-konrad.dybcio@somainline.org
[bjorn: Sorted thermal-zones below "soc"]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add modem/ADSP SMP2P nodes

Add SMP2P nodes that are required for ADSP and modem bringup.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-16-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add TSENS node

This will enable temperature reporting for various SoC
components.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-15-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add qcom,adreno-smmu compatible

The Adreno SMMU in SDM630 needs this compatible string for proper
context handling and split pagetables support.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-14-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add clocks and power domains to SMMU nodes

Add the required clocks and power domains for the SMMUs to work.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-13-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add GPU Clock Controller node

Add the GPU Clock Controller in SDM630 and keep it disabled by
default.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-12-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add interconnect and opp table to sdhc_1

The SDHC port 1 has interconnects and can make use of DVFS:
define the interconnections and the OPP table in order to
optimize performance and power consumption.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-11-konrad.dybcio@somainline.org
[bjorn: Dropped "sdhc1-" prefix from opp-table node]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add SDHCI2 node

This will enable usage of (generally) uSD cards.
While at it, add accompanying OPP table for DVFS.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-10-konrad.dybcio@somainline.org
[bjorn: Dropped "sdhci1-" prefix from opp-table node]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Fix TLMM node and pinctrl configuration

Previous pinctrl configuration was wrong. Fix it and clean up how
multi-pin states are described.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-9-konrad.dybcio@somainline.org
[bjorn: Polished the commit message]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add USB configuration

This will let us use USB2 on our devices. The SoC
supposedly supports USB3, but there are no known
cases of devices that actually have USB3 wired up in
hardware.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-8-konrad.dybcio@somainline.org
[bjorn: Changes dwc3 node name to "usb"]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add qfprom subnodes

These will be required for USB and Adreno support.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-7-konrad.dybcio@somainline.org
[bjorn: y/_/-/ in gpu_speed_bin]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add MDSS nodes

Add MDSS node along with its children to enable display
functionality.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-6-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add interconnect provider nodes

Add interconnect provider nodes to allow for NoC bus scaling.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-5-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add MMCC node

Add MultiMedia Clock Controller node to allow for accessing
and controlling Multimedia Subsystem clocks by their respective
users.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Add RPMPD nodes

Add the rpmpd node on the sdm630 and define the available levels.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sdm630: Rewrite memory map

The memory map was wrong. Fix it.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210728222542.54269-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Fix incorrect cpu opp table entry

CPU0 frequency 768MHz is wrongly modeled as 576000000 hz in
cpu0_opp_table. Use the correct value 768000000 hz.

Fixes: 2b6187abafea ("arm64: dts: qcom: sm8150: Add CPU opp tables")
Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210804132847.2503269-1-thara.gopinath@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150-mtp: Add 8150 compatible string

Add "qcom,sm8150" as one of the platform compatible strings.
This will be later used by cpufreq-dt-platdev to exclude using
cpufreq-dt cpufreq driver.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210804133223.2503517-1-thara.gopinath@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add support for SONY Xperia X Performance / XZ / XZs (msm8996, Tone platform)

Add support for following boards:

- Xperia X Performance (dora)
- Xperia XZ (kagura)
- Xperia XZs (keyaki)

They are all based on the SONY Tone platform and feature largely similar hardware
with the most obvious differences being lack of USB-C and ToF sensor on Dora and
different camera sensor on Keyaki.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-4-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8996-*: Disable HDMI by default

Most phones ship without HDMI and leaving it enabled wrecks
havoc. Disable it in msm8996.dtsi and re-enable it on the boards
that did not disable it previously.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-3-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add MSM8996v3.0 DTSI file

Add an overlay for MSM8996v3.0, which is a pre-final revision
of the said SoC. It has some stark differences with regards to
GPU, or more specifically its power delivery path. Oh, and of
course a different msm-id.

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-2-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add PMI8996 DTSI file

PMI8996 is *almost* the same hardware as PMI8994, say for some annoyances:

- Boards equipped with PMI8996 now have to include pmic-id (which wasn't the
case before)

- Different qpnp-ibb-discharge-resistor value (will be addressed after LABIBB
is introduced)

- Different inhibit-derating-ua value (will be addressed after BCL is
introduced)

- Different ramp_up_step value (will be addressed after [if?] QPNP Flash LED
is introduced)

This DTSI is supposed to be included >>ON TOP OF<< pmi8994.dtsi, like this:

-- msm8996-nice-device.dts --
\#include "pmi8994.dtsi"
\#include "pmi8996.dtsi"

or more likely like this:

-- msm8996-some-phone.dts --
\#include "msm8996.dtsi"
...
\#include "pmi8994.dtsi"

-- msm8996-pmi8996-some-phone.dts --
\#include "msm8996-some-phone.dts"
\#include "pmi8996.dtsi"

So that we only have to keep 2 DTs for devices that were shipped with both
ones, instead of what would be three (device base + pmi8994 + pmi8996)

Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210608202143.247427-1-konrad.dybcio@somainline.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: trogdor: Update audio codec to Max98360A

Use max98360a dts node to correctly describe the hardware.

Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/20210625045010.2914289-1-judyhsiao@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add USB nodes for IDP board

Add USB nodes for sc7280 IDP board.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1625576413-12324-4-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add USB related nodes

Add nodes for DWC3 USB controller, QMP and HS USB PHYs in sc7280 SOC.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1625576413-12324-3-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7280: Add nodes for eMMC and SD card

Add nodes for eMMC and SD card on sc7280.

Signed-off-by: Shaik Sajida Bhanu <sbhanu@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1626159971-22519-1-git-send-email-sbhanu@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Fix usb entries for SA8155p adp board

SA8155p adp board has two USB A-type receptacles called
USB-portB and USB-portC respectively.

While USB-portB is a USB High-Speed connector/interface, the
USB-portC one is a USB 3.1 Super-Speed connector/interface.

Also the USB-portB is used as the USB emergency
download port (for image download purposes).

Enable both the ports on the board in USB Host mode (since all
the USB interfaces are brought out to USB Type A
connectors).

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210627114616.717101-4-bhupesh.sharma@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Sort dc_noc and gem_noc nodes

Nodes should be sorted by address, so move the dc_noc and gem_noc nodes
to their correct place.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210627114616.717101-3-bhupesh.sharma@linaro.org
[bjorn: Adjusted order slightly more]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Use correct naming for dwc3 usb nodes in dts files

The dwc3 usb nodes in several arm64 qcom dts are currently named
differently, somewhere as 'usb@<addr>' and somewhere as 'dwc3@<addr>',
leading to some confusion when one sees the entries in sysfs or
dmesg:
[    1.943482] dwc3 a600000.usb: Adding to iommu group 1
[    2.266127] dwc3 a800000.dwc3: Adding to iommu group 2

Name the usb nodes as 'usb@<addr>' for consistency, which is
the correct convention as per the 'snps,dwc3' dt-binding as
well (see [1]).

[1]. Documentation/devicetree/bindings/usb/snps,dwc3.yaml

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210627114616.717101-2-bhupesh.sharma@linaro.org
[bjorn: Extended to also fix ipq6018]
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add UFS ICE capability

Add support for UFS ICE (Qualcomm Inline Crypto Engine) in
sm8150 SoC dts.

I tested this on SA8155p-adp board, which is a publicly
available development board that uses the sa8155p Qualcomm
Snapdragon SoC. SA8155p platform is similar to the SM8150,
so use this as base for now.

I tested the UFS ICE feature using 'fscrypt' test utility.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Eric Biggers <ebiggers@google.com>
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Link: https://lore.kernel.org/r/20210706133814.621536-1-bhupesh.sharma@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8250: fix usb2 qmp phy node

Use 'lanes' as SuperSpeed lanes device node instead of just 'lane' to
fix issues with TypeC support.

Fixes: 46a6f297d7dd ("arm64: dts: qcom: sm8250: Add USB and PHY device nodes")
Cc: robh+dt@kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20210706230702.299047-2-bryan.odonoghue@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Set adau wakeup delay to 80 ms

Set audu wakeup delay to 80 ms for fixing pop noise during capture begin.

Fixes: ba5f9b5d7ff3 ("arm64: dts: qcom: sc7180: Add wakeup delay for adau codec")
Signed-off-by: Judy Hsiao <judyhsiao@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210708090810.174767-1-judyhsiao@chromium.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8916-wingtech-wt88047: Add IMU

The Xiaomi Redmi 2 has an InvenSense MPU-6880 supported by the
inv_mpu6050 driver in Linux. Add it to the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712133735.318250-4-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8916-wingtech-wt88047: Add notification LED

The Xiaomi Redmi 2 has a notification LED connected to an Awinic
AW2013 controller, add it to the device tree.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712133735.318250-3-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: msm8916-wingtech-wt88047: Add touchscreen

The Xiaomi Redmi 2 has a FocalTech touchscreen. The exact model is
not mentioned anywhere, but it works just fine with the mainline
edt-ft5x06 driver when using the "edt,edt-ft5506" compatible.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712133735.318250-2-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: Add device tree for Xiaomi Redmi 2 (wingtech-wt88047)

The Xiaomi Redmi 2 is a MSM8916 smartphone that was made by Wingtech
(codename: wt88047). It's fairly similar to the other MSM8916 devices.

The device tree contains initial support for the Xiaomi Redmi 2 with:
  - UART (untested, probably available via some test points)
  - eMMC/SD card
  - Buttons
  - Vibrator
  - WiFi/Bluetooth (WCNSS)
  - USB

Note that the Xiaomi Redmi 2 is available in variants with different
names (e.g. Redmi 2 Prime, Redmi 2 Pro, ...). As far as I know the main
difference between those is the amount of RAM and supported LTE bands.
This difference is automatically handled by bootloader/modem firmware
so there is no need for separate device trees.

Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210712133735.318250-1-stephan@gerhold.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sm8150: Add CPU opp tables

Add OPP tables to scale DDR and L3 with CPUs for SM8150 SoCs.
This gives a significant performance boost for cpu-ddr loads.
Below is the results for mbw benchmark with and without the opp tables.

/mbw 1500
Without l3/ddr scaling With l3 ddr/scaling
MEMCPY(MiB/s) 3574 10448
DUMB(MiB/s) 3500 11721
MCBLOCK(MiB/s) 8976 23595

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Link: https://lore.kernel.org/r/20210714182610.92972-1-thara.gopinath@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: ipq8074: Add scm on IPQ8074 SoCs

Enables scm support, clock is not needed for enabling scm interface.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Link: https://lore.kernel.org/r/1611984013-10201-9-git-send-email-gokulsri@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: ipq6018: Update WCSS PIL driver compatible

Updated WCSS PIL driver node with IPQ6018 specific
compatible to enable SoC specific driver data.

Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Link: https://lore.kernel.org/r/1611940320-24830-4-git-send-email-gokulsri@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: ipq6018: enable USB2 support

Signed-off-by: Kathiravan T <kathirav@codeaurora.org>
[baruch: adjust regs address/size; drop binding updates;
 drop unsupported quirk properties]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/59a0d43f34b69406cd320f16edc4e7fabe022bfd.1611756920.git.baruch@tkos.co.il
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

arm64: dts: qcom: sc7180: Add DisplayPort node

Add DP device node on sc7180.

Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1622758940-13485-1-git-send-email-khsieh@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Linux 5.14-rc1

mm/rmap: try_to_migrate() skip zone_device !device_private

I know nothing about zone_device pages and !device_private pages; but if
try_to_migrate_one() will do nothing for them, then it's better that
try_to_migrate() filter them first, than trawl through all their vmas.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/1241d356-8ec9-f47b-a5ec-9b2bf66d242@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: fix new bug: premature return from page_mlock_one()

In the unlikely race case that page_mlock_one() finds VM_LOCKED has been
cleared by the time it got page table lock, page_vma_mapped_walk_done()
must be called before returning, either explicitly, or by a final call
to page_vma_mapped_walk() - otherwise the page table remains locked.

Fixes: cd62734ca60d ("mm/rmap: split try_to_munlock from try_to_unmap")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/lkml/20210711151446.GB4070@xsang-OptiPlex-9020/
Link: https://lore.kernel.org/lkml/f71f8523-cba7-3342-40a7-114abc5d1f51@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: fix old bug: munlocking THP missed other mlocks

The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.

It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped.  Refine the tests.

There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.

(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)

Fixes: 9a73f61bdb8a ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/rmap: fix comments left over from recent changes

Parallel developments in mm/rmap.c have left behind some out-of-date
comments: try_to_migrate_one() also accepts TTU_SYNC (already commented
in try_to_migrate() itself), and try_to_migrate() returns nothing at
all.

TTU_SPLIT_FREEZE has just been deleted, so reword the comment about it
in mm/huge_memory.c; and TTU_IGNORE_ACCESS was removed in 5.11, so
delete the "recently referenced" comment from try_to_unmap_one() (once
upon a time the comment was near the removed codeblock, but they drifted
apart).

Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Link: https://lore.kernel.org/lkml/563ce5b2-7a44-5b4d-1dfd-59a0e65932a9@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'irq-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip

Pull irq fixes from Ingo Molnar:
 "Two fixes:

   - Fix a MIPS IRQ handling RCU bug

   - Remove a DocBook annotation for a parameter that doesn't exist
     anymore"

* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
  genirq/irqdesc: Drop excess kernel-doc entry @lookup

Merge tag 'sched-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip

Pull scheduler fixes from Ingo Molnar:
 "Three fixes:

   - Fix load tracking bug/inconsistency

   - Fix a sporadic CFS bandwidth constraints enforcement bug

   - Fix a uclamp utilization tracking bug for newly woken tasks"

* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/uclamp: Ignore max aggregation if rq is idle
  sched/fair: Fix CFS bandwidth hrtimer expiry type
  sched/fair: Sync load_sum with load_avg after dequeue

Merge tag 'perf-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
 "A fix and a hardware-enablement addition:

   - Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup

   - Add cstate event support for Intel ICELAKE_X and ICELAKE_D"

* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/uncore: Clean up error handling path of iio mapping
  perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support

Merge tag 'locking-urgent-2021-07-11' of git://git./linux/kernel/git/tip/tip

Pull locking fixes from Ingo Molnar:

 - Fix a Sparc crash

 - Fix a number of objtool warnings

 - Fix /proc/lockdep output on certain configs

 - Restore a kprobes fail-safe

* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: sparc: Fix arch_cmpxchg64_local()
  kprobe/static_call: Restore missing static_call_text_reserved()
  static_call: Fix static_call_text_reserved() vs __init
  jump_label: Fix jump_label_text_reserved() vs __init
  locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING

Merge tag 'scsi-misc' of git://git./linux/kernel/git/jejb/scsi

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes and clean ups in the core and various
  drivers.

  The only core change in behaviour is the I/O retry for spinup notify,
  but that shouldn't impact anything other than the failing case"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
  scsi: virtio_scsi: Add validation for residual bytes from response
  scsi: ipr: System crashes when seeing type 20 error
  scsi: core: Retry I/O for Notify (Enable Spinup) Required error
  scsi: mpi3mr: Fix warnings reported by smatch
  scsi: qedf: Add check to synchronize abort and flush
  scsi: MAINTAINERS: Add mpi3mr driver maintainers
  scsi: libfc: Fix array index out of bound exception
  scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
  scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
  scsi: qedf: Use DEVICE_ATTR_RO() macro
  scsi: qedi: Use DEVICE_ATTR_RO() macro
  scsi: message: mptfc: Switch from pci_ to dma_ API
  scsi: be2iscsi: Fix some missing space in some messages
  scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
  scsi: ufs: Fix build warning without CONFIG_PM
  scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
  scsi: qla2xxx: Add heartbeat check
  scsi: virtio_scsi: Do not overwrite SCSI status
  scsi: libsas: Add LUN number check in .slave_alloc callback
  scsi: core: Inline scsi_mq_alloc_queue()
  ...

Merge tag 'perf-tools-for-v5.14-2021-07-10' of git://git./linux/kernel/git/acme/linux

Pull more perf tool updates from Arnaldo Carvalho de Melo:
 "New features:

   - Enable use of BPF counters with 'perf stat --for-each-cgroup',
     using per-CPU 'cgroup-switch' events with an attached BPF program
     that does aggregation per-cgroup in the kernel instead of using
     per-cgroup perf events.

   - Add Topdown metrics L2 events as default events in 'perf stat' for
     systems having those events.

  Hardware tracing:

   - Add a config for max loops without consuming a packet in the Intel
     PT packet decoder, set via 'perf config intel-pt.max-loops=N'

  Hardware enablement:

   - Disable misleading NMI watchdog message in 'perf stat' on hybrid
     systems such as Intel Alder Lake.

   - Add a dummy event on hybrid systems to collect metadata records.

   - Add 24x7 nest metric events for the Power10 platform.

  Fixes:

   - Fix event parsing for PMUs starting with the same prefix.

   - Fix the 'perf trace' 'trace' alias installation dir.

   - Fix buffer size to report iregs in perf script python scripts,
     supporting the extended registers in PowerPC.

   - Fix overflow in elf_sec__is_text().

   - Fix 's' on source line when disasm is empty in the annotation TUI,
     accessible via 'perf annotate', 'perf report' and 'perf top'.

   - Plug leaks in scandir() returned dirent entries in 'perf test' when
     sorting the shell tests.

   - Fix --task and --stat with pipe input in 'perf report'.

   - Fix 'perf probe' use of debuginfo files by build id.

   - If a DSO has both dynsym and symtab ELF sections, read from both
     when loading the symbol table, fixing a problem processing Fedora
     32 glibc DSOs.

  Libraries:

   - Add grouping of events to libperf, from code in tools/perf,
     allowing libperf users to use that mode.

  Misc:

   - Filter plt stubs from the 'perf probe --functions' output.

   - Update UAPI header copies for asound, DRM, mman-common.h and the
     ones affected by the quotactl_fd syscall"

* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
  perf test: Add free() calls for scandir() returned dirent entries
  libperf: Add tests for perf_evlist__set_leader()
  libperf: Remove BUG_ON() from library code in get_group_fd()
  libperf: Add group support to perf_evsel__open()
  perf tools: Fix pattern matching for same substring in different PMU type
  perf record: Add a dummy event on hybrid systems to collect metadata records
  perf stat: Add Topdown metrics L2 events as default events
  libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
  libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
  libperf: Move 'leader' from tools/perf to perf_evsel::leader
  libperf: Move 'idx' from tools/perf to perf_evsel::idx
  libperf: Change tests to single static and shared binaries
  perf intel-pt: Add a config for max loops without consuming a packet
  perf stat: Disable the NMI watchdog message on hybrid
  perf vendor events power10: Adds 24x7 nest metric events for power10 platform
  perf script python: Fix buffer size to report iregs in perf script
  perf trace: Fix the perf trace link location
  perf top: Fix overflow in elf_sec__is_text()
  perf annotate: Fix 's' on source line when disasm is empty
  perf probe: Do not show @plt function by default
  ...

Merge tag 'rtc-5.14' of git://git./linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Mostly documentation/comment changes and non urgent fixes.

   - add or fix SPDX identifiers

   - NXP pcf*: fix datasheet URLs

   - imxdi: add wakeup support

   - pcf2127: handle timestamp interrupts, this fixes a possible
     interrupt storm

   - bd70528: Drop BD70528 support"

* tag 'rtc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (33 commits)
  rtc: pcf8523: rename register and bit defines
  rtc: pcf2127: handle timestamp interrupts
  rtc: at91sam9: Remove unnecessary offset variable checks
  rtc: s5m: Check return value of s5m_check_peding_alarm_interrupt()
  rtc: spear: convert to SPDX identifier
  rtc: tps6586x: convert to SPDX identifier
  rtc: tps80031: convert to SPDX identifier
  rtc: rtd119x: Fix format of SPDX identifier
  rtc: sc27xx: Fix format of SPDX identifier
  rtc: palmas: convert to SPDX identifier
  rtc: max6900: convert to SPDX identifier
  rtc: ds1374: convert to SPDX identifier
  rtc: au1xxx: convert to SPDX identifier
  rtc: pcf85063: Update the PCF85063A datasheet revision
  dt-bindings: rtc: ti,bq32k: take maintainership
  rtc: pcf8563: Fix the datasheet URL
  rtc: pcf85063: Fix the datasheet URL
  rtc: pcf2127: Fix the datasheet URL
  dt-bindings: rtc: ti,bq32k: Convert to json-schema
  dt-bindings: rtc: rx8900: Convert to YAML schema
  ...

mm/page_alloc: Revert pahole zero-sized workaround

Commit dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.

A superior workaround is achieved with commit a0b8200d06ad ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").

This patch reverts the dummy field and the pahole version check.

Fixes: dbbee9d5cd83 ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

rtc: pcf8523: rename register and bit defines

arch/arm/mach-ixp4xx/include/mach/platform.h now gets included indirectly
and defines REG_OFFSET. Rename the register and bit definition to something
specific to the driver.

Fixes: 7fd70c65faac ("ARM: irqstat: Get rid of duplicated declaration")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210710211431.1393589-1-alexandre.belloni@bootlin.com

Merge tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs fixes from Steve French:
 "13 cifs/smb3 fixes. Most are to address minor issues pointed out by
  Coverity.

  Also includes a packet signing enhancement and mount improvement"

* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal version number
  cifs: prevent NULL deref in cifs_compose_mount_options()
  SMB3.1.1: Add support for negotiating signing algorithm
  cifs: use helpers when parsing uid/gid mount options and validate them
  CIFS: Clarify SMB1 code for POSIX Lock
  CIFS: Clarify SMB1 code for rename open file
  CIFS: Clarify SMB1 code for delete
  CIFS: Clarify SMB1 code for SetFileSize
  smb3: fix typo in header file
  CIFS: Clarify SMB1 code for UnixSetPathInfo
  CIFS: Clarify SMB1 code for UnixCreateSymLink
  cifs: clarify SMB1 code for UnixCreateHardLink
  cifs: make locking consistent around the server session status

Merge tag 'pci-v5.14-fixes-1' of git://git./linux/kernel/git/helgaas/pci

Pull pci fix from Bjorn Helgaas:
 "Revert host bridge window patch that fixed HP EliteDesk 805 G6, but
  broke ppc:sam460ex (Bjorn Helgaas)"

* tag 'pci-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "PCI: Coalesce host bridge contiguous apertures"