profile/ivi/kernel-x86-ivi.git
17 years ago[SCSI] aha152x: Clean Reset path
Boaz Harrosh [Sun, 29 Jul 2007 19:24:09 +0000 (22:24 +0300)]
[SCSI] aha152x: Clean Reset path

What Reset code was doing:  Save command's important/dangerous
Info on stack. NULL those members from scsi_cmnd.
Issue a Reset. wait for it to finish than restore members
and return.

What I do is save or NULL nothing. But use the "resetting"
hint in aha152x_internal_queue() to NULL out working members
and leave struct scsi_cmnd alone.

The indent here looks funny but it will change/drop in last
patch and it is clear this way what changed.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aha152x: preliminary fixes and some comments
Boaz Harrosh [Sun, 29 Jul 2007 19:22:04 +0000 (22:22 +0300)]
[SCSI] aha152x: preliminary fixes and some comments

  hunk by hunk:
  - CHECK_CONDITION is what happens to cmnd->status >> 1
    or after status_byte() macro. But here it is used
    directly on status which means 0x1 which is an undefined
    bit in the standard. And is a status that will never
    return from a target.

  - in busfree_run at the DONE_SC phase we have 3 distinct
    operation:
1-if(DONE_SC->SCp.phase & check_condition)
          The REQUEST_SENSE command return.
          - Restore original command
  - Than continue to operation 3.
2-if(DONE_SC->SCp.Status==SAM_STAT_CHECK_CONDITION)
          A regular command returned with a status.
  - Internally re-Q a REQUEST_SENSE.
  - Do not do operation 3.
3-
  - Complete the command and return it to scsi-ml
     So the 0x2 in both these operations (1,2) means the scsi
     check-condition status, hence SAM_STAT_CHECK_CONDITION

  - Here the code asks about !(DONE_SC->SCp.Status & not_issued)
    but "not_issued" is an enum belonging to the "phase" member
    and not to the Status returned from target. The reason this
    works is because not_issued==1 and Also CHECK_CONDITION==1
    (remember from hunk 1). So actually the code was asking
    !(DONE_SC->SCp.Status & CHECK_CONDITION). Which means
    "Has the status been read from target yet?"
    Staus is read at status_run(). "not_issued" is
    cleared in seldo_run() which is usually earlier than
    status_run().

  So this patch does nothing as far as assembly is concerned
  but it does let the reader understand what is going on.

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aha152x: use bounce buffer
Boaz Harrosh [Sun, 29 Jul 2007 19:18:20 +0000 (22:18 +0300)]
[SCSI] aha152x: use bounce buffer

Cause highmem buffers to be bounced to low memory until this
driver supports highmem addresses.  Otherwise it just oopses
on NULL buffer addresses.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aha152x: fix debug mode symbol conflict
Boaz Harrosh [Sun, 29 Jul 2007 19:16:14 +0000 (22:16 +0300)]
[SCSI] aha152x: fix debug mode symbol conflict

The symbol <debug_locks> conflicts with the rather global one in
include/linux/locks.h.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] sd: disentangle barriers in SCSI
James Bottomley [Fri, 3 Aug 2007 21:41:11 +0000 (16:41 -0500)]
[SCSI] sd: disentangle barriers in SCSI

Our current implementation has a generic set of barrier functions that
go through the SCSI driver model.  Realistically, this is unnecessary,
because the only device that can use barriers (sd) can set the flush
functions up at probe or revalidate time.  This patch pulls the barrier
functions out of the mid layer and scsi driver model and relocates them
directly in sd.

Acked-by: Tejun Heo <htejun@gmail.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc : scsi command accessor fix for 8.2.2
James Smart [Sun, 5 Aug 2007 10:08:38 +0000 (06:08 -0400)]
[SCSI] lpfc : scsi command accessor fix for 8.2.2

It was pointed out by Boaz Harrosh <bharrosh@panasas.com> that our
8.2.2 lpfc patches revert a change to using SCSI command accessor
functions.

This patch, to be applied on top of the 8.2.2. patches, updates the
driver for the accessor functions.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] qlogicpti: Some cosmetic changes
Mark Fortescue [Tue, 31 Jul 2007 19:10:45 +0000 (20:10 +0100)]
[SCSI] qlogicpti: Some cosmetic changes

Change a printk sequencing issue where <6> ... was coming up in the middle
of a line when scsi_add_host was being called.
Reduce the length of some printk messages and make the messages
more consistant. All cosmetic but it makes it easier to read as it
scrolles off the screen during boot.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Change version number to 8.2.2
James Smart [Thu, 2 Aug 2007 15:10:46 +0000 (11:10 -0400)]
[SCSI] lpfc 8.2.2 : Change version number to 8.2.2

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Style cleanups
James Smart [Thu, 2 Aug 2007 15:10:37 +0000 (11:10 -0400)]
[SCSI] lpfc 8.2.2 : Style cleanups

- Clean up all instances of mixed tab-space indentation
- Clean up sparse build errors
- Add appropriate static's

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Miscellaneous Bug Fixes
James Smart [Thu, 2 Aug 2007 15:10:31 +0000 (11:10 -0400)]
[SCSI] lpfc 8.2.2 : Miscellaneous Bug Fixes

- Fix vport ndlp ref counting errors
- Fix use after free of ndlp structure
- Use the correct flag to check for LOADING setting.
- Fix driver unload bugs (related to shost references) after link down or rscn
- Fix up HBQ initialization
- Fix port_list locking around driver unload.
- Fix references to hostdata as a phba
- Fix GFFID type offset to work correctly with big endian structure.
- Only call pci_disable_msi if the pci_enable_msi succeeded
- Fix vport_delete wait/fail if in discovery
- Put a reference on the nameservers ndlp when performing CT traffic.
- Remove unbalanced hba unlock.
- Fix up HBQ processing
- Fix lpfc debugfs discovery trace output for ELS rsp cmpl
- Send ADISC when rpi is 0
- Stop FDISC retrying forever
- Unable to retrieve correct config parameter for vport
- Fix sli_validate_fcp_iocb, sli_sum_iocb, sli_abort_iocb to be vport-aware.
- Fix index-out-of-range error in iocb. Spotted by Coverity.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Miscellaneous management and logging mods
James Smart [Thu, 2 Aug 2007 15:10:21 +0000 (11:10 -0400)]
[SCSI] lpfc 8.2.2 : Miscellaneous management and logging mods

 - Remove the "management_version" sysfs parameter (was unused)
 - Add HBQ information to lpfc debugfs
 - Change lpfc_npiv_enable name back to lpfc_enable_npiv (internal stds)
 - Remove "issue_lip" attribute from the vports transport template

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro
James Smart [Thu, 2 Aug 2007 15:10:09 +0000 (11:10 -0400)]
[SCSI] lpfc 8.2.2 : Rework the lpfc_printf_log() macro

Rework the lpfc_printf_log() macro so that logging is enabled on a
per-vport basis. Used to be on a physical-port basis, thus logging
with large numbers of vports became a mess.  Required redefinition of
the macro, and an update of every use.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical port
James Smart [Thu, 2 Aug 2007 15:09:59 +0000 (11:09 -0400)]
[SCSI] lpfc 8.2.2 : Attribute and Parameter splits for vport and physical port

 - Split attributes up into vport and non-vport attributes.
 - Move vport specific cfg params to vport

Many of the vport-specific behaviors were still global attributes
on the physical port. Move them to the vport itself.

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list
James Smart [Thu, 2 Aug 2007 15:09:51 +0000 (11:09 -0400)]
[SCSI] lpfc 8.2.2 : Fix locking around HBA's port_list

Cleans up a lot of bad behaviors that have been in this area a while

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] lpfc 8.2.2 : Error messages and debugfs updates
James Smart [Thu, 2 Aug 2007 15:09:43 +0000 (11:09 -0400)]
[SCSI] lpfc 8.2.2 : Error messages and debugfs updates

Error messages and debugfs updates:
 - Fix up GID_FT error messages
 - Enhance debugfs with slow_ring_trace, dumpslim and nodelist information
 - Add log type (and messages) for vport state changes
 - Enhance log messages when retries ELS fail

Signed-off-by: James Smart <James.Smart@emulex.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] initialize shost_data to zero
FUJITA Tomonori [Tue, 31 Jul 2007 23:40:27 +0000 (08:40 +0900)]
[SCSI] initialize shost_data to zero

It's better to initialize host->shost_data to zero like
target->starget_data and device->sdev_data.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mptsas: add SMP passthrough support via bsg
FUJITA Tomonori [Mon, 30 Jul 2007 17:10:07 +0000 (11:10 -0600)]
[SCSI] mptsas: add SMP passthrough support via bsg

This patch adds support for SAS Management Protocol (SMP) passthrough
support via bsg.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Eric Moore <eric.moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250
David Miller [Mon, 30 Jul 2007 23:19:20 +0000 (16:19 -0700)]
[SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250

This reverts d73f5222a618a91452d41c29f5996ce3d9c63673

The bug that made us increase ESP_BUS_TIMEOUT to 275 turned out to be
a memset bug on 32-bit sparc.

It is better to put this back at the correct timeout value than to
leave it increased when there is no reason for doing so.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] dpt_i2o: convert to SCSI hotplug model
Matthew Wilcox [Mon, 30 Jul 2007 21:19:18 +0000 (15:19 -0600)]
[SCSI] dpt_i2o: convert to SCSI hotplug model

 - Delete refereces to HOSTS_C
 - Switch to module_init/module_exit instead of detect/release
 - Don't pass around the host template and rename it to adpt_template
 - Switch from scsi_register/scsi_unregister to scsi_host_alloc,
   scsi_add_host, scsi_scan_host and scsi_host_put.

Signed-off-by: Matthew Wilcox <matthew@wil.cx>
Acked-by: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] qla2xxx: fix panic caused by previous patch
Seokmann Ju [Mon, 30 Jul 2007 18:01:07 +0000 (11:01 -0700)]
[SCSI] qla2xxx: fix panic caused by previous patch

- this patch will fix a panic caused by omitted memory allocation for the nvram.

Signed-off-by: Seokmann Ju <seokmann.ju@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] aic7xxx: cap maxsync according to correct card limits
James Bottomley [Mon, 30 Jul 2007 14:52:25 +0000 (09:52 -0500)]
[SCSI] aic7xxx: cap maxsync according to correct card limits

Not doing this can cause cards less than u160 capable to send out PPR
offers to devices they can't then deliver on ... causing some devices to
get a bit confused.  Fix by capping the start syncrate at the
appropriate level according to the card capabilities.

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] st: Use mutex instead of semaphore
Matthias Kaehlcke [Sun, 29 Jul 2007 21:38:15 +0000 (23:38 +0200)]
[SCSI] st: Use mutex instead of semaphore

The SCSI Tape driver uses a semaphore as mutex. Use the mutex API
instead of the (binary) semaphore.

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Acked-by: Kai Makisara <kai.makisara@kolumbus.fi>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] bsg: update sg_io_v4 structure
FUJITA Tomonori [Sun, 29 Jul 2007 14:00:46 +0000 (23:00 +0900)]
[SCSI] bsg: update sg_io_v4 structure

This updates sg_io_v4 structure (based on Doug's RFC, release 1.3).

The major changes are:

- add dout_resid field
- increase tag size to 64 bits to comply with SAM-4 and SRP
- add dout_iovec_count and din_iovec_count

dout_iovec_count and din_iovec_count aren't supported now. I'm not
sure whether they will be supported or not but they were added for the
possible future changes.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] mpt fusion: make logging a global sysfs parameter
James Bottomley [Sat, 28 Jul 2007 17:40:21 +0000 (13:40 -0400)]
[SCSI] mpt fusion: make logging a global sysfs parameter

Wire up the mpt_debug_level module parameter so you can write to the
/sys/module/mptbase/parameters/mpt_debug_level and have it take effect
in every ioc.

Acked-by: "Moore, Eric" <Eric.Moore@lsi.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] libsas: fix build dependencies on libata
James Bottomley [Sat, 28 Jul 2007 15:07:36 +0000 (11:07 -0400)]
[SCSI] libsas: fix build dependencies on libata

If you have the libsas with ATA support, it needs libata to function.
The problem is that if you compile in libsas, you can't build libata
as a module (however, vice versa you can).

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] gdth: remove redundant PCI stuff
Jeff Garzik [Tue, 17 Jul 2007 09:25:17 +0000 (05:25 -0400)]
[SCSI] gdth: remove redundant PCI stuff

This patch

* removes struct members that duplicate pci_dev members
* replaces ha->stype usage with ha->pdev->device usage where feasible

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Achim Leubner <Achim_Leubner@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] ibmvscsi: use shost_priv
FUJITA Tomonori [Mon, 23 Jul 2007 00:28:40 +0000 (09:28 +0900)]
[SCSI] ibmvscsi: use shost_priv

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] ibmvscsi: remove unnecessary map_sg check
FUJITA Tomonori [Mon, 23 Jul 2007 00:28:39 +0000 (09:28 +0900)]
[SCSI] ibmvscsi: remove unnecessary map_sg check

No need to check use_sg since sg_tablesize is set appropriately in the
scsi host template.

Brian King's patch (2a7309372fe56ae46c499b772d811ad31c501dd9) did this
cleanup but the data buffer accessors patch (written before the patch
and merged after it) restored the check.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years ago[SCSI] zfcp: convert to use the data buffer accessors
FUJITA Tomonori [Sun, 29 Jul 2007 07:46:28 +0000 (16:46 +0900)]
[SCSI] zfcp: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23
Linus Torvalds [Tue, 31 Jul 2007 04:54:37 +0000 (21:54 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh-2.6.23

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6.23:
  sh: Fix fs.h removal from mm.h regressions.
  sh: fix get_wchan() for SH kernels without framepointers
  sh: arch/sh/boot - fix shell usage
  rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
  sh: remove support for sh7300 and solution engine 7300
  sh: Add sh to the CC_OPTIMIZE_FOR_SIZE dependencies.
  sh: Kill off virt_to_bus()/bus_to_virt().
  sh: sh-sci - fix SH7708 support
  sh: Restrict DSP support to specific CPUs.
  sh: Silence sq compile warning on sh4 nommu.
  sh: Kill the rest of the SE73180 cruft.
  sh: remove support for sh73180 and solution engine 73180
  sh: remove old broken pint code
  sh: Reclaim beginning of P3 space for vmalloc area.
  sh: Fix Dreamcast DMA issues.
  sh: Add kmap_coherent()/kunmap_coherent() interface for SH-4.

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6
Linus Torvalds [Tue, 31 Jul 2007 04:54:16 +0000 (21:54 -0700)]
Merge /pub/scm/linux/kernel/git/lethal/sh64-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh64-2.6:
  sh64: Kill off virt_to_bus()/bus_to_virt().
  sh64: Fix irq_intc build failure.
  sh64: Fix fs.h removal from mm.h regressions.

17 years agosh64: Kill off virt_to_bus()/bus_to_virt().
Paul Mundt [Tue, 31 Jul 2007 04:11:25 +0000 (13:11 +0900)]
sh64: Kill off virt_to_bus()/bus_to_virt().

Follows the SH change.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
17 years agosh64: Fix irq_intc build failure.
Paul Mundt [Tue, 31 Jul 2007 04:07:37 +0000 (13:07 +0900)]
sh64: Fix irq_intc build failure.

Needs interrupt.h:

  CC      arch/sh64/kernel/irq_intc.o
arch/sh64/kernel/irq_intc.c: In function 'make_intc_irq':
arch/sh64/kernel/irq_intc.c:179: error: implicit declaration of function 'disable_irq_nosync'
make[1]: *** [arch/sh64/kernel/irq_intc.o] Error 1

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
17 years agosh64: Fix fs.h removal from mm.h regressions.
Paul Mundt [Tue, 31 Jul 2007 04:03:02 +0000 (13:03 +0900)]
sh64: Fix fs.h removal from mm.h regressions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
17 years agosh: Fix fs.h removal from mm.h regressions.
Paul Mundt [Tue, 31 Jul 2007 04:01:43 +0000 (13:01 +0900)]
sh: Fix fs.h removal from mm.h regressions.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
17 years agoMerge branch 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik...
Linus Torvalds [Mon, 30 Jul 2007 23:38:05 +0000 (16:38 -0700)]
Merge branch 'upstream-linus' of /linux/kernel/git/jgarzik/netdev-2.6

* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6:
  Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c
  PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
  S2io: Increment received packet count correctly
  S2io: Fix crash when resetting adapter
  S2io: Mask spurious interrupts
  S2IO: Implementing review comments from old patches
  S2IO: Checking for the return value of pci map function
  S2IO: Removing MSI support from driver
  S2IO: Removing 3 buffer mode support from the driver
  netxen: drop redudant spinlock
  netxen: Fix interrupt handling for multiport adapters
  netxen: re-init station address after h/w init
  tulip: Remove tulip maintainer
  forcedeth: mac address correct
  gfar: Fix modpost warning
  lib8390: comment on locking by Alan Cox
  Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c

17 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland...
Linus Torvalds [Mon, 30 Jul 2007 23:36:33 +0000 (16:36 -0700)]
Merge branch 'for-linus' of git://git./linux/kernel/git/roland/infiniband

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  IB/ipath: Workaround problem of errormask register being overwritten
  IB/ipath: Fix some issues with buffer cancel and sendctrl register update
  IB/ipath: Use faster put_tid_2 routine after initialization
  IB/ipath: Remove unsafe fastrcvint code from interrupt handler
  IB/ehca: Move extern declarations from .c files to .h files
  IB/mlx4: Whitespace fix
  IB/ehca: Fix include order to better match kernel style
  mlx4_core: Remove kfree() in mlx4_mr_alloc() error flow
  RDMA/amso1100: Initialize the wait_queue_head_t in the c2_qp structure

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6
Linus Torvalds [Mon, 30 Jul 2007 23:35:35 +0000 (16:35 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/driver-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  modules: better error messages when modules fail to load due to a sysfs problem.
  kobject: update documentation
  kset: kernel-doc cleanups
  driver core: revert "device" link creation check
  stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface
  Fix Doc/sysfs-rules typos
  kernel-doc fixes for PCI and drivers/base/
  kobject: put kobject_actions in kobject.h
  kobject: fix link error when CONFIG_HOTPLUG is disabled
  HOWTO: sync Japanese HOWTO
  HOWTO: adjust translation header of Japanese stable_api_nonsense.txt

17 years agoMerge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6
Linus Torvalds [Mon, 30 Jul 2007 23:34:00 +0000 (16:34 -0700)]
Merge /pub/scm/linux/kernel/git/gregkh/usb-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: "sparse" cleanups for usb gadgets
  usb-serial: Fix edgeport regression on non-EPiC devices
  USB: more pxa2xx_udc dead code removal
  USB: NIKON D50 is an unusual device
  USB: drivers/usb/serial/sierra.c: make 3 functions static
  USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0
  USB: mct_u232: Convert to proper speed handling API
  digi_acceleport: Drag the driver kicking and screaming into coding style
  cp2101: Remove broken termios optimisation, use proper speed API
  USB: Fix a bug in usb_start_wait_urb
  USB: fix scatterlist PIO case (IOMMU)
  USB: fix usb_serial_suspend(): buggy code
  USB: yet another quirky device
  USB: Add CanonScan LiDE30 to the quirk list
  USB: even more quirks
  USB: usb.h kernel-doc additions
  USB: more quirky devices
  USB: Don't let usb-storage steal Blackberry Pearl
  USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig

17 years agomodules: better error messages when modules fail to load due to a sysfs problem.
Greg Kroah-Hartman [Mon, 30 Jul 2007 18:26:38 +0000 (11:26 -0700)]
modules: better error messages when modules fail to load due to a sysfs problem.

This helps people when debugging problems like the ones that were in the
recent -mm releases.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokobject: update documentation
Cornelia Huck [Fri, 27 Jul 2007 11:41:10 +0000 (13:41 +0200)]
kobject: update documentation

Update kobject documentation:

- Update structure definitions.
- Remove documentation of removed struct subsystem.

(First shot, uevent_ops probably need some documentation as well.)

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokset: kernel-doc cleanups
Randy Dunlap [Fri, 27 Jul 2007 16:36:26 +0000 (09:36 -0700)]
kset: kernel-doc cleanups

Removed kernel-doc marker (/**) from struct kset -- each struct member
still needs annotation.

Corrected one parameter name so that kernel-doc matches the macro.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agodriver core: revert "device" link creation check
Cornelia Huck [Wed, 25 Jul 2007 07:58:08 +0000 (09:58 +0200)]
driver core: revert "device" link creation check

driver core: revert "device" link creation check

Commit 2ee97caf0a6602f749ddbfdb1449e383e1212707 introduced an extra
check on when to create the "device" symlink. Unfortunately, this
breaks input, so let's revert to the old behaviour.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agostable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer...
Juan Lang [Tue, 24 Jul 2007 20:24:19 +0000 (13:24 -0700)]
stable_api_nonsense.txt: Disambiguate the use of "this" by using "that" to refer to the syscall interface

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoFix Doc/sysfs-rules typos
Randy Dunlap [Tue, 24 Jul 2007 04:05:02 +0000 (21:05 -0700)]
Fix Doc/sysfs-rules typos

Fix typos only (spelling, grammar, duplicate words, etc.).

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Kay Sievers <kay.sievers@vrfy.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokernel-doc fixes for PCI and drivers/base/
Randy Dunlap [Tue, 24 Jul 2007 04:42:11 +0000 (21:42 -0700)]
kernel-doc fixes for PCI and drivers/base/

Fix undocumented function parameters in PCI and drivers/base.

Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq'
Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokobject: put kobject_actions in kobject.h
Greg Kroah-Hartman [Tue, 9 Apr 2002 19:14:34 +0000 (12:14 -0700)]
kobject: put kobject_actions in kobject.h

This prevents the extern declaration in the driver core.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agokobject: fix link error when CONFIG_HOTPLUG is disabled
Cornelia Huck [Fri, 20 Jul 2007 11:58:13 +0000 (13:58 +0200)]
kobject: fix link error when CONFIG_HOTPLUG is disabled

Leaving kobject_actions[] in kobject_uevent.c, but putting it outside
the #ifdef looks indeed like the best solution to me. This way, we
avoid adding #ifdef CONFIG_HOTPLUG into core.c, when all other
functions called do not need such a thing.

Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoHOWTO: sync Japanese HOWTO
Tsugikazu Shibata [Thu, 19 Jul 2007 02:24:54 +0000 (11:24 +0900)]
HOWTO: sync Japanese HOWTO

Signed-off-by: Tsugikazu Shibata <tshibata@ab.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoHOWTO: adjust translation header of Japanese stable_api_nonsense.txt
IKEDA, Munehiro [Thu, 19 Jul 2007 02:36:56 +0000 (11:36 +0900)]
HOWTO: adjust translation header of Japanese stable_api_nonsense.txt

Signed-off-by: IKEDA, Munehiro <m-ikeda@ds.jp.nec.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: "sparse" cleanups for usb gadgets
David Brownell [Mon, 30 Jul 2007 19:31:07 +0000 (12:31 -0700)]
USB: "sparse" cleanups for usb gadgets

This removes complaints about the gadget stack which are generated by
the currrent "sparse":  it doesn't like the fact that zero is the null
pointer.  (Last I checked, C guarantees that's correct ...)

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agousb-serial: Fix edgeport regression on non-EPiC devices
Adam Kropelin [Sun, 29 Jul 2007 15:03:29 +0000 (11:03 -0400)]
usb-serial: Fix edgeport regression on non-EPiC devices

Fix serious regression on non-EPiC edgeport usb-serial devices. Baud
rate and MCR/LCR registers are not being written on these models due
to apparent copy-n-paste errors introduced with EPiC support.

Failure reported by Nick Pasich <Nick@NickAndBarb.net>.

Signed-off-by: Adam Kropelin <akropel1@rochester.rr.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: more pxa2xx_udc dead code removal
David Brownell [Sat, 21 Jul 2007 18:43:35 +0000 (11:43 -0700)]
USB: more pxa2xx_udc dead code removal

Remove some more dead code from the pxa2xx_udc driver:  support
for a no-longer-undocumented hardware "test mode".  Newer chips
made this the default, evidently as the best workaround for deep
silicon bugs.  The interest was that this seemed to be the only
way to kick in the (documented!) double buffering capability.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: NIKON D50 is an unusual device
Milinevsky Dmitry [Fri, 20 Jul 2007 23:58:53 +0000 (16:58 -0700)]
USB: NIKON D50 is an unusual device

This short patch allows NIKON D50 to be mounted as UMS[unusual device]
on Linux niam 2.6.22-rc7-cfs-v18 #2 PREEMPT Tue Jul 3 22:35:53 EEST
2007 i686 Intel(R) Celeron(R) M processor 1.50GHz GenuineIntel
GNU/Linux,
some previous kernels...

lsusb -v
Bus 001 Device 006: ID 04b0:0409 Nikon Corp.
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x04b0 Nikon Corp.
  idProduct          0x0409
  bcdDevice            1.00
  iManufacturer           1 NIKON
  iProduct                2 NIKON DSC D50
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower                2mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered

Signed-off-by: Milinevsky Dmitry <niam.niam@gmail.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: <caglar@pardus.org.tr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: drivers/usb/serial/sierra.c: make 3 functions static
Adrian Bunk [Sun, 29 Jul 2007 14:59:02 +0000 (16:59 +0200)]
USB: drivers/usb/serial/sierra.c: make 3 functions static

This patch makes three needlessly global functions static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Cc: Kevin Lloyd <linux@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen...
Oliver Neukum [Tue, 24 Jul 2007 13:13:42 +0000 (15:13 +0200)]
USB: fix BUG: sleeping function called from invalid context at /home/jeremy/hg/xen/paravirt/linux/drivers/usb/core/urb.c:524, in_atomic():1, irqs_disabled():0

Clearly there's a bug in
drivers/usb/serial/usb-serial.c:usb_serial_put().  It shouldn't call
kref_put() while holding a spinlock.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: mct_u232: Convert to proper speed handling API
Alan Cox [Thu, 26 Jul 2007 18:01:10 +0000 (19:01 +0100)]
USB: mct_u232: Convert to proper speed handling API

Signed-off-by: Alan Cox <alan@redhat.com>
Acked-by: Pete Zaitcev <zaitcev@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agodigi_acceleport: Drag the driver kicking and screaming into coding style
Alan Cox [Thu, 26 Jul 2007 17:57:52 +0000 (18:57 +0100)]
digi_acceleport: Drag the driver kicking and screaming into coding style

- The outbreak of acute bracketitus has been cured
- The belief that brackets should have spaces everywhere likewise
- Various other coding style tweaks
- Use baud rates not Bfoo in the speed setup switch

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agocp2101: Remove broken termios optimisation, use proper speed API
Alan Cox [Thu, 26 Jul 2007 17:54:12 +0000 (18:54 +0100)]
cp2101: Remove broken termios optimisation, use proper speed API

I've also enabled the commented out support for 7200, 14400, 55854,
127117 and 3686400 baud as you can now set such rates in the kernel.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Fix a bug in usb_start_wait_urb
Alan Stern [Tue, 24 Jul 2007 22:23:23 +0000 (18:23 -0400)]
USB: Fix a bug in usb_start_wait_urb

This patch (as941) fixes a bug recently added to the USB synchronous
API.  The status of a completed URB must be preserved separately
across a completion callback.  Also, the actual_length value isn't
available until after the URB has fully completed.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix scatterlist PIO case (IOMMU)
David Brownell [Sun, 22 Jul 2007 22:13:13 +0000 (15:13 -0700)]
USB: fix scatterlist PIO case (IOMMU)

Update the scatterlist logic so that PIO options are also disabled
when an IOMMU may have coalesced pages during dma_map_sg() ... it's
not just HIGHMEM that can make trouble supporting both PIO and DMA
based host controller drivers.

There also seems to be a cross-arch issue here, with 64bit powerpc
not using an IOMMU define ... and its IOMMU_VMERGE config can always
be overridden on the kernel command line.  So this is better, but
still imperfect.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: fix usb_serial_suspend(): buggy code
Oliver Neukum [Mon, 23 Jul 2007 06:58:39 +0000 (08:58 +0200)]
USB: fix usb_serial_suspend(): buggy code

Am Montag 23 Juli 2007 schrieb Adrian Bunk:
> Commit ec22559e0b7a05283a3413bda5d177e42c950e23 added the following
> function to drivers/usb/serial/usb-serial.c:
>
[..]
>
> The Coverity checker spotted the inconsequent NULL checking for "serial".
>
> Looking at the code it also doesn't seem to have been intended to always
> return 0.

Coverity is right. The check for NULL is wrongly done and the error
return is lost.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: yet another quirky device
Oliver Neukum [Mon, 30 Jul 2007 10:09:59 +0000 (12:09 +0200)]
USB: yet another quirky device

another quirky scanner.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Add CanonScan LiDE30 to the quirk list
Johann Felix Soden [Sat, 28 Jul 2007 15:10:33 +0000 (17:10 +0200)]
USB: Add CanonScan LiDE30 to the quirk list

This patch adds CanoScan N1240U/LiDE30 (Scanner) to the list of quirky USB
devices.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: even more quirks
Oliver Neukum [Fri, 20 Jul 2007 09:34:53 +0000 (11:34 +0200)]
USB: even more quirks

The number of quirky devices seems to be large.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: usb.h kernel-doc additions
Randy Dunlap [Thu, 19 Jul 2007 17:21:37 +0000 (10:21 -0700)]
USB: usb.h kernel-doc additions

Add kernel-doc entries in <linux/usb.h> for:

Warning(linux-2.6.22-git12//include/linux/usb.h:162): No description found for parameter 'intf_assoc'
Warning(linux-2.6.22-git12//include/linux/usb.h:268): No description found for parameter 'intf_assoc[USB_MAXIADS]'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: more quirky devices
Oliver Neukum [Thu, 19 Jul 2007 11:00:15 +0000 (13:00 +0200)]
USB: more quirky devices

our list of devices which cannot be suspended keeps growing.

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: Don't let usb-storage steal Blackberry Pearl
Jeremy Katz [Thu, 19 Jul 2007 13:37:42 +0000 (09:37 -0400)]
USB: Don't let usb-storage steal Blackberry Pearl

The Blackberry Pearl can run in two modes; a usb-storage only mode
and a mode that allows access via mass storage and to its database.
The berry_charge module will set the device to dual mode and thus we
should ignore its native mode if that module is built

Signed-off-by: Jeremy Katz <katzj@redhat.com>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoUSB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig
Juergen Beisert [Thu, 19 Jul 2007 15:02:59 +0000 (17:02 +0200)]
USB: devices misc: Trivial patch to build the IOWARRIOR when it is selected in Kconfig

Trivial patch to build the IOWARRIOR when it is selected in Kconfig.

Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
17 years agoIB/ipath: Workaround problem of errormask register being overwritten
Dave Olson [Fri, 20 Jul 2007 21:41:26 +0000 (14:41 -0700)]
IB/ipath: Workaround problem of errormask register being overwritten

On some system hardware, we are seeing moderately common cases of the
chip errormask register being overwritten due to a chip bug in iba6120
that is triggered by a vendor-specific PCIe broadcast message.  This
patch merely checks periodically, and corrects it if needed (the
overwrite can cause us to not get error and hardware error
interrupts).  Also, make dd->ipath_errormask the one, true canonical
source for kr_errormask, and remove references to ipath_ignorederrs as
it is currently unused.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: John Gregor <john.gregor@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Fix some issues with buffer cancel and sendctrl register update
Dave Olson [Fri, 20 Jul 2007 21:23:37 +0000 (14:23 -0700)]
IB/ipath: Fix some issues with buffer cancel and sendctrl register update

There was confused use of INFINIPATH_S_PIOBUFAVAILUPD (value) and
IPATH_S_PIOBUFAVAILUPD (bit position).  Also, some callers of
ipath_cancel_sends() need kr_sendctrl restored, and some want to do it
later.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Use faster put_tid_2 routine after initialization
Dave Olson [Fri, 20 Jul 2007 20:34:02 +0000 (13:34 -0700)]
IB/ipath: Use faster put_tid_2 routine after initialization

At one time the ipath_minrev field was initialized prior to the
ipath_init_iba6120_funcs call, but that is no longer the case, so the
slower put_tid routine was always being used.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoIB/ipath: Remove unsafe fastrcvint code from interrupt handler
Dave Olson [Fri, 20 Jul 2007 19:50:55 +0000 (12:50 -0700)]
IB/ipath: Remove unsafe fastrcvint code from interrupt handler

The fastrcvint code's purpose was to avoid reading the interrupt
status if kernel packets were in the receive queue (to reduce
overhead).  Because intstatus was not read, we could miss the error
interrupt bit indicating freeze mode, since it only delivers a single
interrupt, even if still pending after intclear is written.

This patch removes that unsafe optimization.

Signed-off-by: Dave Olson <dave.olson@qlogic.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
17 years agoFix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia...
Micah Gruber [Tue, 24 Jul 2007 02:44:56 +0000 (10:44 +0800)]
Fix a potential NULL pointer dereference in mace_interrupt() in drivers/net/pcmcia/nmclan_cs.c

This patch fixes a potential null dereference bug where we dereference
DEV before a null check. This patch simply moves the dereferencing after
the null check.

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoPATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe
Komuro [Mon, 23 Jul 2007 12:36:06 +0000 (21:36 +0900)]
PATCH kernel 2.6.22] PCMCIA-NETDEV : modify smc91c92_cs.c to become SMP safe

protect smc_start_xmit, smc_interrupt and media_check by spin_lock.

Signed-off-by: Komuro <komurojun-mbn@nifty.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Increment received packet count correctly
Ramkrishna Vepa [Thu, 26 Jul 2007 02:43:12 +0000 (19:43 -0700)]
S2io: Increment received packet count correctly

 - Fix to increment the received packet count correctly.

(Resending; Removed HTML sections in the patch)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Fix crash when resetting adapter
Ramkrishna Vepa [Thu, 26 Jul 2007 02:40:33 +0000 (19:40 -0700)]
S2io: Fix crash when resetting adapter

- Removed the call to pci_set_power_state to reset the adapter as it was resulting
  in system crash on some platforms.

(Resending; Removed HTML sections in the patch)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2io: Mask spurious interrupts
Ramkrishna Vepa [Thu, 26 Jul 2007 02:35:09 +0000 (19:35 -0700)]
S2io: Mask spurious interrupts

- Mask single and double bit ETQ ecc errors to inhibit spurious interrupts.

(Resending; Removed HTML sections in the patch)

Signed-off-by: Santosh Rastapur <santosh.rastapur@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Implementing review comments from old patches
Veena Parat [Mon, 23 Jul 2007 06:39:43 +0000 (02:39 -0400)]
S2IO: Implementing review comments from old patches

 - Incorporated Jeff Garzik's comments on coding standards

Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Checking for the return value of pci map function
Veena Parat [Mon, 23 Jul 2007 06:37:14 +0000 (02:37 -0400)]
S2IO: Checking for the return value of pci map function

 - Checking for the return value of pci map function
 - Implemented Francois Romieu's comments on eliminating code duplication
   using goto
 - Implemented Francois Romieu's comments on using a temporary variable for
   accessing statistics structure

Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Removing MSI support from driver
Veena Parat [Mon, 23 Jul 2007 06:23:54 +0000 (02:23 -0400)]
S2IO: Removing MSI support from driver

 - Removed MSI support from driver - unused feature
 - Replaced request_mem_region with pci_request_regions

Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoS2IO: Removing 3 buffer mode support from the driver
Veena Parat [Mon, 23 Jul 2007 06:20:51 +0000 (02:20 -0400)]
S2IO: Removing 3 buffer mode support from the driver

 - Removed 3 buffer mode support from driver - unused feature
 - Incorporated Jeff Garzik's comments on elimination of inline typecasting
 - Code cleanup : Removed a few extra spaces

Signed-off-by: Veena Parat <veena.parat@neterion.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonetxen: drop redudant spinlock
Dhananjay Phadke [Fri, 27 Jul 2007 17:42:11 +0000 (23:12 +0530)]
netxen: drop redudant spinlock

Some leftover code that makes use of adapter->lock in tx_timeout function,
which resets the interface under this lock. In close() when the workqueue
is flushed, prints the warning about sleeping with interrupts disabled
(when spinlock debug is enabled). The lock was required with private netxen
IOCTLs, which were removed a while ago.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonetxen: Fix interrupt handling for multiport adapters
dhananjay@netxen.com [Wed, 25 Jul 2007 14:43:12 +0000 (20:13 +0530)]
netxen: Fix interrupt handling for multiport adapters

This patch fixes masking of interrupts on multiport adapters. Also disables
interrupts upon ifdown interface. The wrong mask could result in interrupt
flood after interface is down.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agonetxen: re-init station address after h/w init
dhananjay@netxen.com [Wed, 25 Jul 2007 14:43:11 +0000 (20:13 +0530)]
netxen: re-init station address after h/w init

This is a workaround for firmware bug with 2nd port of multiport adapter,
where MAC address is reset. Driver just needs to overwrite it with the
value read from PROM.

Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agotulip: Remove tulip maintainer
Valerie Henson [Mon, 30 Jul 2007 19:10:52 +0000 (13:10 -0600)]
tulip: Remove tulip maintainer

Remove Val Henson as tulip maintainer and let her roam free, FREE!

Signed-off-by: Val Henson <val@nmt.edu>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoforcedeth: mac address correct
Ayaz Abdulla [Fri, 27 Jul 2007 03:46:00 +0000 (23:46 -0400)]
forcedeth: mac address correct

In older chipsets, the mac address was stored in reversed order.
However, in newer chipsets, the mac address is in correct order. This
patch takes those newer chipsets into account and does not rely on a
special bit setup by BIOS'.

Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agogfar: Fix modpost warning
Kumar Gala [Thu, 26 Jul 2007 05:52:34 +0000 (00:52 -0500)]
gfar: Fix modpost warning

Fix the following modpost warning:

WARNING: vmlinux.o(.init.text+0x1aa6c): Section mismatch: reference to .exit.text:gfar_mdio_exit (between 'gfar_init' and 'gfar_mdio_init')

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agolib8390: comment on locking by Alan Cox
Jarek Poplawski [Thu, 26 Jul 2007 12:44:01 +0000 (14:44 +0200)]
lib8390: comment on locking by Alan Cox

Additional explanation of problems with locking by Alan Cox.

Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Cc: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoFix a potential NULL pointer dereference in write_bulk_callback() in drivers/net...
Micah Gruber [Mon, 23 Jul 2007 08:05:52 +0000 (16:05 +0800)]
Fix a potential NULL pointer dereference in write_bulk_callback() in drivers/net/usb/pegasus.c

This patch fixes a potential null dereference bug where we dereference
pegasus before a null check. This patch simply moves the dereferencing
after the null check.

Signed-off-by: Micah Gruber <micah.gruber@gmail.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
17 years agoMerge branch 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph...
Linus Torvalds [Mon, 30 Jul 2007 19:39:15 +0000 (12:39 -0700)]
Merge branch 'to-linus' of git://git./linux/kernel/git/christoph/slab

* 'to-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/christoph/slab:
  slub: fix bug in slub debug support
  slub: add lock debugging check

17 years agoMerge branch 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Mon, 30 Jul 2007 19:38:57 +0000 (12:38 -0700)]
Merge branch 'master' of ssh:///linux/kernel/git/mchehab/v4l-dvb

* 'master' of ssh://master.kernel.org/pub/scm/linux/kernel/git/mchehab/v4l-dvb:
  V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static
  V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes
  V4L/DVB (5932): Af9005 fix tuner module unload
  V4L/DVB (5920): ivtv: fix incorrect fw size report.
  V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.
  V4L/DVB (5917): ivtv: improve mailbox responsiveness.
  V4L/DVB (5916): ivtv: fix pause/continue/play handling
  V4L/DVB (5900): usbvision: fix bugs [sg]_register functions
  V4L/DVB (5899): bttv: Fix Viewcast Osprey 440 support
  V4L/DVB (5893): DVB: fix includes of video.h when __KERNEL__ is undefined
  V4L/DVB (5891): zr36067: Turn off raw capture properly
  V4L/DVB (5890): zr36067: Add UYVY, RGB555X, RGB565X, and RGB32 formats
  V4L/DVB (5888): zr36067: Driver was not returning correct image size
  V4L/DVB (5887): zr36067: Fix poll() operation
  V4L/DVB (5886): zr36067: Fix problem setting norms

17 years agoV4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static
Adrian Bunk [Sun, 29 Jul 2007 15:40:48 +0000 (12:40 -0300)]
V4L/DVB (5939): dvb-pll: make struct dvb_pll_fcv1236d static

The fcv1236d support patch was created before the "dvb: remove static
dependencies on dvb-pll" patch was applied, but the fcv1236d patch didn't
get merged until after the fact.

struct dvb_pll_fcv1236d can become static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes
Adrian Bunk [Fri, 27 Jul 2007 14:09:57 +0000 (11:09 -0300)]
V4L/DVB (5933): Dvb-usb/af9005-fe.c: error check fixes

This patch:
- adds a missing error check and
- removes an error check that could never be true

Both spotted by the Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5932): Af9005 fix tuner module unload
Luca Olivetti [Fri, 27 Jul 2007 13:27:47 +0000 (10:27 -0300)]
V4L/DVB (5932): Af9005 fix tuner module unload

This patch removes the useless tuner field and avoids a double free of
the tuner (either mt2060 or qt1010).

Signed-off-by: Luca Olivetti <luca@ventoso.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5920): ivtv: fix incorrect fw size report.
Hans Verkuil [Sun, 22 Jul 2007 14:12:26 +0000 (11:12 -0300)]
V4L/DVB (5920): ivtv: fix incorrect fw size report.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.
Hans Verkuil [Sun, 22 Jul 2007 12:39:56 +0000 (09:39 -0300)]
V4L/DVB (5918): ivtv: fix TV-out VBI handling, only reset on last close.

While decoding (MPEG or YUV) is active or when VBI output is in use, then
do not clear the VBI output of the saa7127. Only after the last user is
gone can we clear it.

This fixes the case where playback was stopped, another channel was chosen
and playback was restarted, while /dev/vbi16 was used to set the WSS
(widescreen) setting. Without this fix the WSS was reset on every stop
instead of just keeping the last value.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5917): ivtv: improve mailbox responsiveness.
Hans Verkuil [Sun, 22 Jul 2007 11:49:32 +0000 (08:49 -0300)]
V4L/DVB (5917): ivtv: improve mailbox responsiveness.

First try polling for the result of a mailbox command, then
switch to a test/sleep loop. Also reduce the sleep time from 10 ms
to 1 ms. Improves the responsiveness of the mailbox handling.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5916): ivtv: fix pause/continue/play handling
Hans Verkuil [Sun, 22 Jul 2007 11:46:38 +0000 (08:46 -0300)]
V4L/DVB (5916): ivtv: fix pause/continue/play handling

Pausing a decoder followed by a Play command would do nothing. Fixed.
Pausing a decoder running at non-standard speed following by a Continue
would reset the speed to 100%. Fixed.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
17 years agoV4L/DVB (5900): usbvision: fix bugs [sg]_register functions
Trent Piepho [Mon, 23 Jul 2007 09:58:31 +0000 (06:58 -0300)]
V4L/DVB (5900): usbvision: fix bugs [sg]_register functions

s_register was assigning the return code to (unsigned)reg->val, rather than
errCode, which it what it would return.  Except reg->val can't be < 0, so it
would never actually return an error.

g_register never actually put the value it read into reg->val.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>