Dan Carpenter [Mon, 11 Feb 2019 18:32:10 +0000 (21:32 +0300)]
btrfs: drop the lock on error in btrfs_dev_replace_cancel
We should drop the lock on this error path. This has been found by a
static tool.
The lock needs to be released, it's there to protect access to the
dev_replace members and is not supposed to be left locked. The value of
state that's being switched would need to be artifically changed to an
invalid value so the default: branch is taken.
Fixes:
d189dd70e255 ("btrfs: fix use-after-free due to race between replace start and cancel")
CC: stable@vger.kernel.org # 5.0+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Johannes Thumshirn [Mon, 18 Feb 2019 10:28:37 +0000 (11:28 +0100)]
btrfs: ensure that a DUP or RAID1 block group has exactly two stripes
We recently had a customer issue with a corrupted filesystem. When
trying to mount this image btrfs panicked with a division by zero in
calc_stripe_length().
The corrupt chunk had a 'num_stripes' value of 1. calc_stripe_length()
takes this value and divides it by the number of copies the RAID profile
is expected to have to calculate the amount of data stripes. As a DUP
profile is expected to have 2 copies this division resulted in 1/2 = 0.
Later then the 'data_stripes' variable is used as a divisor in the
stripe length calculation which results in a division by 0 and thus a
kernel panic.
When encountering a filesystem with a DUP block group and a
'num_stripes' value unequal to 2, refuse mounting as the image is
corrupted and will lead to unexpected behaviour.
Code inspection showed a RAID1 block group has the same issues.
Fixes:
e06cd3dd7cea ("Btrfs: add validadtion checks for chunk loading")
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dan Robertson [Tue, 19 Feb 2019 02:56:43 +0000 (02:56 +0000)]
btrfs: init csum_list before possible free
The scrub_ctx csum_list member must be initialized before scrub_free_ctx
is called. If the csum_list is not initialized beforehand, the
list_empty call in scrub_free_csums will result in a null deref if the
allocation fails in the for loop.
Fixes:
a2de733c78fa ("btrfs: scrub")
CC: stable@vger.kernel.org # 3.0+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Dan Robertson <dan@dlrobertson.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 12 Dec 2018 18:05:59 +0000 (18:05 +0000)]
Btrfs: remove no longer needed range length checks for deduplication
Comparing the content of the pages in the range to deduplicate is now
done in generic_remap_checks called by the generic helper
generic_remap_file_range_prep(), which takes care of ensuring we do not
compare/deduplicate undefined data beyond a file's EOF (range from EOF
to the next block boundary). So remove these checks which are now
redundant.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 13 Feb 2019 12:14:09 +0000 (12:14 +0000)]
Btrfs: fix fsync after succession of renames and unlink/rmdir
After a succession of renames operations of different files and unlinking
one of them, if we fsync one of the renamed files we can end up with a
log that will either fail to replay at mount time or result in a filesystem
that is in an inconsistent state. One example scenario:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/fname1
$ touch /mnt/testdir/fname2
$ sync
$ mv /mnt/testdir/fname1 /mnt/testdir/fname3
$ rm -f /mnt/testdir/fname2
$ ln /mnt/testdir/fname3 /mnt/testdir/fname2
$ touch /mnt/testdir/fname1
$ xfs_io -c "fsync" /mnt/testdir/fname1
<power failure>
$ mount /dev/sdb /mnt
$ umount /mnt
$ btrfs check /dev/sdb
[1/7] checking root items
[2/7] checking extents
[3/7] checking free space cache
[4/7] checking fs roots
root 5 inode 259 errors 2, no orphan item
ERROR: errors found in fs roots
Opening filesystem to check...
Checking filesystem on /dev/sdc
UUID:
20e4abb8-5a19-4492-8bb4-
6084125c2d0d
found 393216 bytes used, error(s) found
total csum bytes: 0
total tree bytes: 131072
total fs tree bytes: 32768
total extent tree bytes: 16384
btree space waste bytes: 122986
file data blocks allocated: 262144
referenced 262144
On a kernel without the first patch in this series, titled
"[PATCH] Btrfs: fix fsync after succession of renames of different files",
we get instead an error when mounting the filesystem due to failure of
replaying the log:
$ mount /dev/sdb /mnt
mount: mount /dev/sdb on /mnt failed: File exists
Fix this by logging the parent directory of an inode whenever we find an
inode that no longer exists (was unlinked in the current transaction),
during the procedure which finds inodes that have old names that collide
with new names of other inodes.
A test case for fstests follows soon.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 13 Feb 2019 12:14:03 +0000 (12:14 +0000)]
Btrfs: fix fsync after succession of renames of different files
After a succession of rename operations of different files and fsyncing
one of them, such that each file gets a new name that corresponds to an
old name of another file, we can end up with a log that will cause a
failure when attempted to replay at mount time (an EEXIST error).
We currently have correct behaviour when such succession of renames
involves only two files, but if there are more files involved, we end up
not logging all the inodes that are needed, therefore resulting in a
failure when attempting to replay the log.
Example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir
$ touch /mnt/testdir/fname1
$ touch /mnt/testdir/fname2
$ sync
$ mv /mnt/testdir/fname1 /mnt/testdir/fname3
$ mv /mnt/testdir/fname2 /mnt/testdir/fname4
$ ln /mnt/testdir/fname3 /mnt/testdir/fname2
$ touch /mnt/testdir/fname1
$ xfs_io -c "fsync" /mnt/testdir/fname1
<power failure>
$ mount /dev/sdb /mnt
mount: mount /dev/sdb on /mnt failed: File exists
So fix this by checking all inode dependencies when logging an inode. That
is, if one logged inode A has a new name that matches the old name of some
other inode B, check if inode B has a new name that matches the old name
of some other inode C, and so on. This fix is implemented not by doing any
recursive function calls but by using an iterative method using a linked
list that is used in a first-in-first-out fashion.
A test case for fstests follows soon.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 16 Jan 2019 16:00:57 +0000 (11:00 -0500)]
btrfs: honor path->skip_locking in backref code
Qgroups will do the old roots lookup at delayed ref time, which could be
while walking down the extent root while running a delayed ref. This
should be fine, except we specifically lock eb's in the backref walking
code irrespective of path->skip_locking, which deadlocks the system.
Fix up the backref code to honor path->skip_locking, nobody will be
modifying the commit_root when we're searching so it's completely safe
to do.
This happens since
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup
accounting time out of commit trans"), kernel may lockup with quota
enabled.
There is one backref trace triggered by snapshot dropping along with
write operation in the source subvolume. The example can be reliably
reproduced:
btrfs-cleaner D 0 4062 2 0x80000000
Call Trace:
schedule+0x32/0x90
btrfs_tree_read_lock+0x93/0x130 [btrfs]
find_parent_nodes+0x29b/0x1170 [btrfs]
btrfs_find_all_roots_safe+0xa8/0x120 [btrfs]
btrfs_find_all_roots+0x57/0x70 [btrfs]
btrfs_qgroup_trace_extent_post+0x37/0x70 [btrfs]
btrfs_qgroup_trace_leaf_items+0x10b/0x140 [btrfs]
btrfs_qgroup_trace_subtree+0xc8/0xe0 [btrfs]
do_walk_down+0x541/0x5e3 [btrfs]
walk_down_tree+0xab/0xe7 [btrfs]
btrfs_drop_snapshot+0x356/0x71a [btrfs]
btrfs_clean_one_deleted_snapshot+0xb8/0xf0 [btrfs]
cleaner_kthread+0x12b/0x160 [btrfs]
kthread+0x112/0x130
ret_from_fork+0x27/0x50
When dropping snapshots with qgroup enabled, we will trigger backref
walk.
However such backref walk at that timing is pretty dangerous, as if one
of the parent nodes get WRITE locked by other thread, we could cause a
dead lock.
For example:
FS 260 FS 261 (Dropped)
node A node B
/ \ / \
node C node D node E
/ \ / \ / \
leaf F|leaf G|leaf H|leaf I|leaf J|leaf K
The lock sequence would be:
Thread A (cleaner) | Thread B (other writer)
-----------------------------------------------------------------------
write_lock(B) |
write_lock(D) |
^^^ called by walk_down_tree() |
| write_lock(A)
| write_lock(D) << Stall
read_lock(H) << for backref walk |
read_lock(D) << lock owner is |
the same thread A |
so read lock is OK |
read_lock(A) << Stall |
So thread A hold write lock D, and needs read lock A to unlock.
While thread B holds write lock A, while needs lock D to unlock.
This will cause a deadlock.
This is not only limited to snapshot dropping case. As the backref
walk, even only happens on commit trees, is breaking the normal top-down
locking order, makes it deadlock prone.
Fixes:
fb235dc06fac ("btrfs: qgroup: Move half of the qgroup accounting time out of commit trans")
CC: stable@vger.kernel.org # 4.14+
Reported-and-tested-by: David Sterba <dsterba@suse.com>
Reported-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
[ rebase to latest branch and fix lock assert bug in btrfs/007 ]
Signed-off-by: Qu Wenruo <wqu@suse.com>
[ copy logs and deadlock analysis from Qu's patch ]
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Thu, 24 Jan 2019 23:55:27 +0000 (07:55 +0800)]
btrfs: qgroup: Make qgroup async transaction commit more aggressive
[BUG]
Btrfs qgroup will still hit EDQUOT under the following case:
$ dev=/dev/test/test
$ mnt=/mnt/btrfs
$ umount $mnt &> /dev/null
$ umount $dev &> /dev/null
$ mkfs.btrfs -f $dev
$ mount $dev $mnt -o nospace_cache
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ fallocate -l 900M $mnt/subv/padding
$ sync
$ rm $mnt/subv/padding
# Hit EDQUOT
$ xfs_io -f -c "pwrite 0 512M" $mnt/subv/real_file
[CAUSE]
Since commit
a514d63882c3 ("btrfs: qgroup: Commit transaction in advance
to reduce early EDQUOT"), btrfs is not forced to commit transaction to
reclaim more quota space.
Instead, we just check pertrans metadata reservation against some
threshold and try to do asynchronously transaction commit.
However in above case, the pertrans metadata reservation is pretty small
thus it will never trigger asynchronous transaction commit.
[FIX]
Instead of only accounting pertrans metadata reservation, we calculate
how much free space we have, and if there isn't much free space left,
commit transaction asynchronously to try to free some space.
This may slow down the fs when we have less than 32M free qgroup space,
but should reduce a lot of false EDQUOT, so the cost should be
acceptable.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:12 +0000 (15:15 +0800)]
btrfs: qgroup: Move reserved data accounting from btrfs_delayed_ref_head to btrfs_qgroup_extent_record
[BUG]
Btrfs/139 will fail with a high probability if the testing machine (VM)
has only 2G RAM.
Resulting the final write success while it should fail due to EDQUOT,
and the fs will have quota exceeding the limit by 16K.
The simplified reproducer will be: (needs a 2G ram VM)
$ mkfs.btrfs -f $dev
$ mount $dev $mnt
$ btrfs subv create $mnt/subv
$ btrfs quota enable $mnt
$ btrfs quota rescan -w $mnt
$ btrfs qgroup limit -e 1G $mnt/subv
$ for i in $(seq -w 1 8); do
xfs_io -f -c "pwrite 0 128M" $mnt/subv/file_$i > /dev/null
echo "file $i written" > /dev/kmsg
done
$ sync
$ btrfs qgroup show -pcre --raw $mnt
The last pwrite will not trigger EDQUOT and final 'qgroup show' will
show something like:
qgroupid rfer excl max_rfer max_excl parent child
-------- ---- ---- -------- -------- ------ -----
0/5 16384 16384 none none --- ---
0/256
1073758208 1073758208 none
1073741824 --- ---
And
1073758208 is larger than
>
1073741824.
[CAUSE]
It's a bug in btrfs qgroup data reserved space management.
For quota limit, we must ensure that:
reserved (data + metadata) + rfer/excl <= limit
Since rfer/excl is only updated at transaction commmit time, reserved
space needs to be taken special care.
One important part of reserved space is data, and for a new data extent
written to disk, we still need to take the reserved space until
rfer/excl numbers get updated.
Originally when an ordered extent finishes, we migrate the reserved
qgroup data space from extent_io tree to delayed ref head of the data
extent, expecting delayed ref will only be cleaned up at commit
transaction time.
However for small RAM machine, due to memory pressure dirty pages can be
flushed back to disk without committing a transaction.
The related events will be something like:
file 1 written
btrfs_finish_ordered_io: ino=258 ordered offset=0 len=
54947840
btrfs_finish_ordered_io: ino=258 ordered offset=
54947840 len=5636096
btrfs_finish_ordered_io: ino=258 ordered offset=
61153280 len=57344
btrfs_finish_ordered_io: ino=258 ordered offset=
61210624 len=8192
btrfs_finish_ordered_io: ino=258 ordered offset=
60583936 len=569344
cleanup_ref_head: num_bytes=
54947840
cleanup_ref_head: num_bytes=5636096
cleanup_ref_head: num_bytes=569344
cleanup_ref_head: num_bytes=57344
cleanup_ref_head: num_bytes=8192
^^^^^^^^^^^^^^^^ This will free qgroup data reserved space
file 2 written
...
file 8 written
cleanup_ref_head: num_bytes=8192
...
btrfs_commit_transaction <<< the only transaction committed during
the test
When file 2 is written, we have already freed 128M reserved qgroup data
space for ino 258. Thus later write won't trigger EDQUOT.
This allows us to write more data beyond qgroup limit.
In my 2G ram VM, it could reach about 1.2G before hitting EDQUOT.
[FIX]
By moving reserved qgroup data space from btrfs_delayed_ref_head to
btrfs_qgroup_extent_record, we can ensure that reserved qgroup data
space won't be freed half way before commit transaction, thus fix the
problem.
Fixes:
f64d5ca86821 ("btrfs: delayed_ref: Add new function to record reserved space into delayed ref")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 12 Feb 2019 17:20:04 +0000 (18:20 +0100)]
btrfs: scrub: remove unused nocow worker pointer
The member btrfs_fs_info::scrub_nocow_workers is unused since the nocow
optimization was removed from scrub in
9bebe665c3e4 ("btrfs: scrub:
Remove unused copy_nocow_pages and its callchain").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 12 Feb 2019 15:51:18 +0000 (16:51 +0100)]
btrfs: scrub: add assertions for worker pointers
The scrub worker pointers are not NULL iff the scrub is running, so
reset them back once the last reference is dropped. Add assertions to
the initial phase of scrub to verify that.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 30 Jan 2019 06:45:02 +0000 (14:45 +0800)]
btrfs: scrub: convert scrub_workers_refcnt to refcount_t
Use the refcount_t for fs_info::scrub_workers_refcnt instead of int so
we get the extra checks. All reference changes are still done under
scrub_lock.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 30 Jan 2019 06:45:01 +0000 (14:45 +0800)]
btrfs: scrub: add scrub_lock lockdep check in scrub_workers_get
scrub_workers_refcnt is protected by scrub_lock, add lockdep_assert_held()
in scrub_workers_get().
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Suggested-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Wed, 30 Jan 2019 06:45:00 +0000 (14:45 +0800)]
btrfs: scrub: fix circular locking dependency warning
This fixes a longstanding lockdep warning triggered by
fstests/btrfs/011.
Circular locking dependency check reports warning[1], that's because the
btrfs_scrub_dev() calls the stack #0 below with, the fs_info::scrub_lock
held. The test case leading to this warning:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /btrfs
$ btrfs scrub start -B /btrfs
In fact we have fs_info::scrub_workers_refcnt to track if the init and destroy
of the scrub workers are needed. So once we have incremented and decremented
the fs_info::scrub_workers_refcnt value in the thread, its ok to drop the
scrub_lock, and then actually do the btrfs_destroy_workqueue() part. So this
patch drops the scrub_lock before calling btrfs_destroy_workqueue().
[359.258534] ======================================================
[359.260305] WARNING: possible circular locking dependency detected
[359.261938] 5.0.0-rc6-default #461 Not tainted
[359.263135] ------------------------------------------------------
[359.264672] btrfs/20975 is trying to acquire lock:
[359.265927]
00000000d4d32bea ((wq_completion)"%s-%s""btrfs", name){+.+.}, at: flush_workqueue+0x87/0x540
[359.268416]
[359.268416] but task is already holding lock:
[359.270061]
0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs]
[359.272418]
[359.272418] which lock already depends on the new lock.
[359.272418]
[359.274692]
[359.274692] the existing dependency chain (in reverse order) is:
[359.276671]
[359.276671] -> #3 (&fs_info->scrub_lock){+.+.}:
[359.278187] __mutex_lock+0x86/0x9c0
[359.279086] btrfs_scrub_pause+0x31/0x100 [btrfs]
[359.280421] btrfs_commit_transaction+0x1e4/0x9e0 [btrfs]
[359.281931] close_ctree+0x30b/0x350 [btrfs]
[359.283208] generic_shutdown_super+0x64/0x100
[359.284516] kill_anon_super+0x14/0x30
[359.285658] btrfs_kill_super+0x12/0xa0 [btrfs]
[359.286964] deactivate_locked_super+0x29/0x60
[359.288242] cleanup_mnt+0x3b/0x70
[359.289310] task_work_run+0x98/0xc0
[359.290428] exit_to_usermode_loop+0x83/0x90
[359.291445] do_syscall_64+0x15b/0x180
[359.292598] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[359.294011]
[359.294011] -> #2 (sb_internal#2){.+.+}:
[359.295432] __sb_start_write+0x113/0x1d0
[359.296394] start_transaction+0x369/0x500 [btrfs]
[359.297471] btrfs_finish_ordered_io+0x2aa/0x7c0 [btrfs]
[359.298629] normal_work_helper+0xcd/0x530 [btrfs]
[359.299698] process_one_work+0x246/0x610
[359.300898] worker_thread+0x3c/0x390
[359.302020] kthread+0x116/0x130
[359.303053] ret_from_fork+0x24/0x30
[359.304152]
[359.304152] -> #1 ((work_completion)(&work->normal_work)){+.+.}:
[359.306100] process_one_work+0x21f/0x610
[359.307302] worker_thread+0x3c/0x390
[359.308465] kthread+0x116/0x130
[359.309357] ret_from_fork+0x24/0x30
[359.310229]
[359.310229] -> #0 ((wq_completion)"%s-%s""btrfs", name){+.+.}:
[359.311812] lock_acquire+0x90/0x180
[359.312929] flush_workqueue+0xaa/0x540
[359.313845] drain_workqueue+0xa1/0x180
[359.314761] destroy_workqueue+0x17/0x240
[359.315754] btrfs_destroy_workqueue+0x57/0x200 [btrfs]
[359.317245] scrub_workers_put+0x2c/0x60 [btrfs]
[359.318585] btrfs_scrub_dev+0x336/0x590 [btrfs]
[359.319944] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs]
[359.321622] btrfs_ioctl+0x28a4/0x2e40 [btrfs]
[359.322908] do_vfs_ioctl+0xa2/0x6d0
[359.324021] ksys_ioctl+0x3a/0x70
[359.325066] __x64_sys_ioctl+0x16/0x20
[359.326236] do_syscall_64+0x54/0x180
[359.327379] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[359.328772]
[359.328772] other info that might help us debug this:
[359.328772]
[359.330990] Chain exists of:
[359.330990] (wq_completion)"%s-%s""btrfs", name --> sb_internal#2 --> &fs_info->scrub_lock
[359.330990]
[359.334376] Possible unsafe locking scenario:
[359.334376]
[359.336020] CPU0 CPU1
[359.337070] ---- ----
[359.337821] lock(&fs_info->scrub_lock);
[359.338506] lock(sb_internal#2);
[359.339506] lock(&fs_info->scrub_lock);
[359.341461] lock((wq_completion)"%s-%s""btrfs", name);
[359.342437]
[359.342437] *** DEADLOCK ***
[359.342437]
[359.343745] 1 lock held by btrfs/20975:
[359.344788] #0:
0000000053ea26a6 (&fs_info->scrub_lock){+.+.}, at: btrfs_scrub_dev+0x322/0x590 [btrfs]
[359.346778]
[359.346778] stack backtrace:
[359.347897] CPU: 0 PID: 20975 Comm: btrfs Not tainted 5.0.0-rc6-default #461
[359.348983] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626cc-prebuilt.qemu-project.org 04/01/2014
[359.350501] Call Trace:
[359.350931] dump_stack+0x67/0x90
[359.351676] print_circular_bug.isra.37.cold.56+0x15c/0x195
[359.353569] check_prev_add.constprop.44+0x4f9/0x750
[359.354849] ? check_prev_add.constprop.44+0x286/0x750
[359.356505] __lock_acquire+0xb84/0xf10
[359.357505] lock_acquire+0x90/0x180
[359.358271] ? flush_workqueue+0x87/0x540
[359.359098] flush_workqueue+0xaa/0x540
[359.359912] ? flush_workqueue+0x87/0x540
[359.360740] ? drain_workqueue+0x1e/0x180
[359.361565] ? drain_workqueue+0xa1/0x180
[359.362391] drain_workqueue+0xa1/0x180
[359.363193] destroy_workqueue+0x17/0x240
[359.364539] btrfs_destroy_workqueue+0x57/0x200 [btrfs]
[359.365673] scrub_workers_put+0x2c/0x60 [btrfs]
[359.366618] btrfs_scrub_dev+0x336/0x590 [btrfs]
[359.367594] ? start_transaction+0xa1/0x500 [btrfs]
[359.368679] btrfs_dev_replace_by_ioctl.cold.19+0x179/0x1bb [btrfs]
[359.369545] btrfs_ioctl+0x28a4/0x2e40 [btrfs]
[359.370186] ? __lock_acquire+0x263/0xf10
[359.370777] ? kvm_clock_read+0x14/0x30
[359.371392] ? kvm_sched_clock_read+0x5/0x10
[359.372248] ? sched_clock+0x5/0x10
[359.372786] ? sched_clock_cpu+0xc/0xc0
[359.373662] ? do_vfs_ioctl+0xa2/0x6d0
[359.374552] do_vfs_ioctl+0xa2/0x6d0
[359.375378] ? do_sigaction+0xff/0x250
[359.376233] ksys_ioctl+0x3a/0x70
[359.376954] __x64_sys_ioctl+0x16/0x20
[359.377772] do_syscall_64+0x54/0x180
[359.378841] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[359.380422] RIP: 0033:0x7f5429296a97
Backporting to older kernels: scrub_nocow_workers must be freed the same
way as the others.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
[ update changelog ]
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 8 Feb 2019 07:39:37 +0000 (15:39 +0800)]
btrfs: fix comment its device list mutex not volume lock
We have killed volume mutex (commit:
dccdb07bc996
btrfs: kill btrfs_fs_info::volume_mutex). This a trival one seems to have
escaped.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Fri, 25 Jan 2019 05:09:15 +0000 (13:09 +0800)]
btrfs: extent_io: Kill the forward declaration of flush_write_bio
There is no need to forward declare flush_write_bio(), as it only
depends on submit_one_bio(). Both of them are pretty small, just move
them to kill the forward declaration.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 30 Jan 2019 14:51:00 +0000 (16:51 +0200)]
btrfs: Fix grossly misleading argument names in extent io search
The variables and function parameters of __etree_search which pertain to
prev/next are grossly misnamed. Namely, prev_ret holds the next state
and not the previous. Similarly, next_ret actually holds the previous
extent state relating to the offset we are interested in. Fix this by
renaming the variables as well as switching the arguments order. No
functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 30 Jan 2019 14:50:50 +0000 (16:50 +0200)]
btrfs: Remove EXTENT_FIRST_DELALLOC bit
With the refactoring introduced in
8b62f87bad9c ("Btrfs: reworki
outstanding_extents") this flag became unused. Remove it and renumber
the following flags accordingly. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 30 Jan 2019 14:50:49 +0000 (16:50 +0200)]
btrfs: use WARN_ON in a canonical form btrfs_remove_block_group
There is no point in using a construct like 'if (!condition)
WARN_ON(1)'. Use WARN_ON(!condition) directly. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:13 +0000 (14:03 -0500)]
btrfs: reserve extra space during evict
We could generate a lot of delayed refs in evict but never have any left
over space from our block rsv to make up for that fact. So reserve some
extra space and give it to the transaction so it can be used to refill
the delayed refs rsv every loop through the truncate path.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:12 +0000 (14:03 -0500)]
btrfs: be more explicit about allowed flush states
For FLUSH_LIMIT flushers we really can only allocate chunks and flush
delayed inode items, everything else is problematic. I added a bunch of
new states and it lead to weirdness in the FLUSH_LIMIT case because I
forgot about how it worked. So instead explicitly declare the states
that are ok for flushing with FLUSH_LIMIT and use that for our state
machine. Then as we add new things that are safe we can just add them
to this list.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:11 +0000 (14:03 -0500)]
btrfs: loop in inode_rsv_refill
With severe fragmentation we can end up with our inode rsv size being
huge during writeout, which would cause us to need to make very large
metadata reservations.
However we may not actually need that much once writeout is complete,
because of the over-reservation for the worst case.
So instead try to make our reservation, and if we couldn't make it
re-calculate our new reservation size and try again. If our reservation
size doesn't change between tries then we know we are actually out of
space and can error. Flushing that could have been running in parallel
did not make any space.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ rename to calc_refill_bytes, update comment and changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:10 +0000 (14:03 -0500)]
btrfs: don't enospc all tickets on flush failure
With the introduction of the per-inode block_rsv it became possible to
have really really large reservation requests made because of data
fragmentation. Since the ticket stuff assumed that we'd always have
relatively small reservation requests it just killed all tickets if we
were unable to satisfy the current request.
However, this is generally not the case anymore. So fix this logic to
instead see if we had a ticket that we were able to give some
reservation to, and if we were continue the flushing loop again.
Likewise we make the tickets use the space_info_add_old_bytes() method
of returning what reservation they did receive in hopes that it could
satisfy reservations down the line.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:08 +0000 (14:03 -0500)]
btrfs: don't use global reserve for chunk allocation
We've done this forever because of the voodoo around knowing how much
space we have. However, we have better ways of doing this now, and on
normal file systems we'll easily have a global reserve of 512MiB, and
since metadata chunks are usually 1GiB that means we'll allocate
metadata chunks more readily. Instead use the actual used amount when
determining if we need to allocate a chunk or not.
This has a side effect for mixed block group fs'es where we are no
longer allocating enough chunks for the data/metadata requirements. To
deal with this add a ALLOC_CHUNK_FORCE step to the flushing state
machine. This will only get used if we've already made a full loop
through the flushing machinery and tried committing the transaction.
If we have then we can try and force a chunk allocation since we likely
need it to make progress. This resolves issues I was seeing with
the mixed bg tests in xfstests without the new flushing state.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ merged with patch "add ALLOC_CHUNK_FORCE to the flushing code" ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:07 +0000 (14:03 -0500)]
btrfs: dump block_rsv details when dumping space info
For enospc_debug having the block rsvs is super helpful to see if we've
done something wrong.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:03:06 +0000 (14:03 -0500)]
btrfs: check if there are free block groups for commit
may_commit_transaction will skip committing the transaction if we don't
have enough pinned space or if we're trying to find space for a SYSTEM
chunk. However, if we have pending free block groups in this transaction
we still want to commit as we may be able to allocate a chunk to make
our reservation. So instead of just returning ENOSPC, check if we have
free block groups pending, and if so commit the transaction to allow us
to use that free space.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:08 +0000 (15:20 -0500)]
btrfs: add zstd compression level support
Zstd compression requires different amounts of memory for each level of
compression. The prior patches implemented indirection to allow for each
compression type to manage their workspaces independently. This patch
uses this indirection to implement compression level support for zstd.
To manage the additional memory require, each compression level has its
own queue of workspaces. A global LRU is used to help with reclaim.
Reclaim is done via a timer which provides a mechanism to decrease
memory utilization by keeping only workspaces around that are sized
appropriately. Forward progress is guaranteed by a preallocated max
workspace hidden from the LRU.
When getting a workspace, it uses a bitmap to identify the levels that
are populated and scans up. If it finds a workspace that is greater than
it, it uses it, but does not update the last_used time and the
corresponding place in the LRU. If we hit memory pressure, we sleep on
the max level workspace. We continue to rescan in case we can use a
smaller workspace, but eventually should be able to obtain the max level
workspace or allocate one again should memory pressure subside.
The memory requirement for decompression is the same as level 1, and
therefore can use any of available workspace.
The number of workspaces is bound by an upper limit of the workqueue's
limit which currently is 2 (percpu limit). The reclaim timer is used to
free inactive/improperly sized workspaces and is set to 307s to avoid
colliding with transaction commit (every 30s).
Repeating the experiment from v2 [1], the Silesia corpus was copied to a
btrfs filesystem 10 times and then read back after dropping the caches.
The btrfs filesystem was on an SSD.
Level Ratio Compression (MB/s) Decompression (MB/s) Memory (KB)
1 2.658 438.47 910.51 780
2 2.744 364.86 886.55 1004
3 2.801 336.33 828.41 1260
4 2.858 286.71 886.55 1260
5 2.916 212.77 556.84 1388
6 2.363 119.82 990.85 1516
7 3.000 154.06 849.30 1516
8 3.011 159.54 875.03 1772
9 3.025 100.51 940.15 1772
10 3.033 118.97 616.26 1772
11 3.036 94.19 802.11 1772
12 3.037 73.45 931.49 1772
13 3.041 55.17 835.26 2284
14 3.087 44.70 716.78 2547
15 3.126 37.30 878.84 2547
[1] https://lore.kernel.org/linux-btrfs/
20181031181108.289340-1-terrelln@fb.com/
Cc: Nick Terrell <terrelln@fb.com>
Cc: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:07 +0000 (15:20 -0500)]
btrfs: make zstd memory requirements monotonic
It is possible based on the level configurations that a higher level
workspace uses less memory than a lower level workspace. In order to
reuse workspaces, this must be made a monotonic relationship. This
precomputes the required memory for each level and enforces the
monotonicity between level and memory required. This is also done
in upstream zstd in [1].
[1] https://github.com/facebook/zstd/commit/
a68b76afefec6876f8e8a538155109a5aeac0143
Cc: Nick Terrell <terrelln@fb.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:06 +0000 (15:20 -0500)]
btrfs: zstd use the passed through level instead of default
Zstd currently only supports the default level of compression. This
patch switches to using the level passed in for btrfs zstd
configuration.
Zstd workspaces now keep track of the requested level as this can differ
from the size of the workspace.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:05 +0000 (15:20 -0500)]
btrfs: change set_level() to bound the level passed in
Currently, the only user of set_level() is zlib which sets an internal
workspace parameter. As level is now plumbed into get_workspace(), this
can be handled there rather than separately.
This repurposes set_level() to bound the level passed in so it can be
used when setting the mounts compression level and as well as verifying
the level before getting a workspace. The other benefit is this divides
the meaning of compress(0) and get_workspace(0). The former means we
want to use the default compression level of the compression type. The
latter means we can use any workspace available.
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:04 +0000 (15:20 -0500)]
btrfs: plumb level through the compression interface
Zlib compression supports multiple levels, but doesn't require changing
in how a workspace itself is created and managed. Zstd introduces a
different memory requirement such that higher levels of compression
require more memory.
This requires changes in how the alloc()/get() methods work for zstd.
This pach plumbs compression level through the interface as a parameter
in preparation for zstd compression levels. This gives the compression
types opportunity to create/manage based on the compression level.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:03 +0000 (15:20 -0500)]
btrfs: move to function pointers for get/put workspaces
The previous patch added generic helpers for get_workspace() and
put_workspace(). Now, we can migrate ownership of the workspace_manager
to be in the compression type code as the compression code itself
doesn't care beyond being able to get a workspace. The init/cleanup and
get/put methods are abstracted so each compression algorithm can decide
how they want to manage their workspaces.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:02 +0000 (15:20 -0500)]
btrfs: add compression interface in (get/put)_workspace
There are two levels of workspace management. First, alloc()/free()
which are responsible for actually creating and destroy workspaces.
Second, at a higher level, get()/put() which is the compression code
asking for a workspace from a workspace_manager.
The compression code shouldn't really care how it gets a workspace, but
that it got a workspace. This adds get_workspace() and put_workspace()
to be the higher level interface which is responsible for indexing into
the appropriate compression type. It also introduces
btrfs_put_workspace() and btrfs_get_workspace() to be the generic
implementations of the higher interface.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:01 +0000 (15:20 -0500)]
btrfs: add helper methods for workspace manager init and cleanup
Workspace manager init and cleanup code is open coded inside a for loop
over the compression types. This forces each compression type to rely on
the same workspace manager implementation. This patch creates helper
methods that will be the generic implementation for btrfs workspace
management.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:20:00 +0000 (15:20 -0500)]
btrfs: unify compression ops with workspace_manager
Make the workspace_manager own the interface operations rather than
managing index-paired arrays for the workspace_manager and compression
operations.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:19:59 +0000 (15:19 -0500)]
btrfs: manage heuristic workspace as index 0
While the heuristic workspaces aren't really compression workspaces,
they use the same interface for managing them. So rather than branching,
let's just handle them once again as the index 0 compression type.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:19:58 +0000 (15:19 -0500)]
btrfs: rename workspaces_list to workspace_manager
This is in preparation for zstd compression levels. As each level will
require different size of workspace, workspaces_list is no longer a
really fitting name.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Dennis Zhou [Mon, 4 Feb 2019 20:19:57 +0000 (15:19 -0500)]
btrfs: add helpers for compression type and level
It is very easy to miss places that rely on a certain bitshifting for
decoding the type_level overloading. Add helpers to do this instead.
Cc: Omar Sandoval <osandov@osandov.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 4 Jan 2019 05:31:54 +0000 (13:31 +0800)]
btrfs: introduce new ioctl to unregister a btrfs device
Support for a new command that can be used eg. as a command
$ btrfs device scan --forget [dev]'
(the final name may change though)
to undo the effects of 'btrfs device scan [dev]'. For this purpose
this patch proposes to use ioctl #5 as it was empty and is next to the
SCAN ioctl.
The new ioctl BTRFS_IOC_FORGET_DEV works only on the control device
(/dev/btrfs-control) to unregister one or all devices, devices that are
not mounted.
The argument is struct btrfs_ioctl_vol_args, ::name specifies the device
path. To unregister all device, the path is an empty string.
Again, the devices are removed only if they aren't part of a mounte
filesystem.
This new ioctl provides:
- release of unwanted btrfs_fs_devices and btrfs_devices structures
from memory if the device is not going to be mounted
- ability to mount filesystem in degraded mode, when one devices is
corrupted like in split brain raid1
- running test cases which would require reloading the kernel module
but this is not possible eg. due to mounted filesystem or built-in
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Mon, 3 Dec 2018 16:06:52 +0000 (11:06 -0500)]
btrfs: replace cleaner_delayed_iput_mutex with a waitqueue
The throttle path doesn't take cleaner_delayed_iput_mutex, which means
we could think we're done flushing iputs in the data space reservation
path when we could have a throttler doing an iput. There's no real
reason to serialize the delayed iput flushing, so instead of taking the
cleaner_delayed_iput_mutex whenever we flush the delayed iputs just
replace it with an atomic counter and a waitqueue. This removes the
short (or long depending on how big the inode is) window where we think
there are no more pending iputs when there really are some.
The waiting is killable as it could be indirectly called from user
operations like fallocate or zero-range. Such call sites should handle
the error but otherwise it's not necessary. Eg. flush_space just needs
to attempt to make space by waiting on iputs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add killable comment and changelog parts ]
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 30 Jan 2019 05:07:51 +0000 (13:07 +0800)]
btrfs: Output ENOSPC debug info in inc_block_group_ro
Since inc_block_group_ro() would return -ENOSPC, outputting debug info
for enospc_debug mount option would be helpful to debug some balance
false ENOSPC report.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Tue, 13 Nov 2018 07:05:08 +0000 (15:05 +0800)]
btrfs: qgroup: Remove duplicated trace points for qgroup_rsv_add/release
Inside qgroup_rsv_add/release(), we have trace events
trace_qgroup_update_reserve() to catch reserved space update.
However we still have two manual trace_qgroup_update_reserve() calls
just outside these functions. Remove these duplicated calls.
Fixes:
64ee4e751a1c ("btrfs: qgroup: Update trace events to use new separate rsv types")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anders Roxell [Tue, 29 Jan 2019 13:01:46 +0000 (14:01 +0100)]
btrfs: let the assertion expression compile in all configs
A compiler warning (in a patch in development) pointed to a variable
that was used only inside and ASSERT:
u64 root_objectid = root->root_key.objectid;
ASSERT(root_objectid == ...);
fs/btrfs/relocation.c: In function ‘insert_dirty_subv’:
fs/btrfs/relocation.c:2138:6: warning: unused variable ‘root_objectid’ [-Wunused-variable]
u64 root_objectid = root->root_key.objectid;
^~~~~~~~~~~~~
When CONFIG_BRTFS_ASSERT isn't enabled, variable root_objectid isn't used.
Rework the assertion helper by adding a runtime check instead of the
'#ifdef CONFIG_BTRFS_ASSERT #else ...", so the compiler sees the
condition being passed into an inline function after preprocessing.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 23 Jan 2019 17:07:14 +0000 (18:07 +0100)]
btrfs: merge btrfs_set_lock_blocking_rw with it's caller
The last caller that does not have a fixed value of lock is
btrfs_set_path_blocking, that actually does the same conditional swtich
by the lock type so we can merge the branches together and remove the
helper.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 00:11:50 +0000 (02:11 +0200)]
btrfs: simplify waiting loop in btrfs_tree_lock
Currently, the number of readers and writers is checked and in case
there are any, wait and redo the locks. There's some duplication
before the branches go back to again label, eg. calling wait_event on
blocking_readers twice.
The sequence is transformed
loop:
* wait for readers
* wait for writers
* write_lock
* check readers, unlock and wait for readers, loop
* check writers, unlock and wait for writers, loop
The new sequence is not exactly the same due to the simplification, for
readers it's slightly faster. For the writers, original code does
* wait for writers
* (loop) wait for readers
* wait for writers -- again
while the new goes directly to the reader check. This should behave the
same on a contended lock with multiple writers and readers, but can
reduce number of times we're waiting on something.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 00:03:48 +0000 (02:03 +0200)]
btrfs: open code now trivial btrfs_set_lock_blocking
btrfs_set_lock_blocking is now only a simple wrapper around
btrfs_set_lock_blocking_write. The name does not bring any semantic
value that could not be inferred from the new function so there's no
point keeping it.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Wed, 4 Apr 2018 00:00:17 +0000 (02:00 +0200)]
btrfs: replace btrfs_set_lock_blocking_rw with appropriate helpers
We can use the right helper where the lock type is a fixed parameter.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 3 Apr 2018 23:52:31 +0000 (01:52 +0200)]
btrfs: split btrfs_clear_lock_blocking_rw to read and write helpers
There are many callers that hardcode the desired lock type so we can
avoid the switch and call them directly. Split the current function to
two. There are no remaining users of btrfs_clear_lock_blocking_rw so
it's removed. The call sites will be converted in followup patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Tue, 3 Apr 2018 23:43:05 +0000 (01:43 +0200)]
btrfs: split btrfs_set_lock_blocking_rw to read and write helpers
There are many callers that hardcode the desired lock type so we can
avoid the switch and call them directly. Split the current function to
two but leave a helper that still takes the variable lock type to make
current code compile. The call sites will be converted in followup
patches.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:18 +0000 (15:15 +0800)]
btrfs: qgroup: Cleanup old subtree swap code
Since it's replaced by new delayed subtree swap code, remove the
original code.
The cleanup is small since most of its core function is still used by
delayed subtree swap trace.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:17 +0000 (15:15 +0800)]
btrfs: qgroup: Use delayed subtree rescan for balance
Before this patch, qgroup code traces the whole subtree of subvolume and
reloc trees unconditionally.
This makes qgroup numbers consistent, but it could cause tons of
unnecessary extent tracing, which causes a lot of overhead.
However for subtree swap of balance, just swap both subtrees because
they contain the same contents and tree structure, so qgroup numbers
won't change.
It's the race window between subtree swap and transaction commit could
cause qgroup number change.
This patch will delay the qgroup subtree scan until COW happens for the
subtree root.
So if there is no other operations for the fs, balance won't cause extra
qgroup overhead. (best case scenario)
Depending on the workload, most of the subtree scan can still be
avoided.
Only for worst case scenario, it will fall back to old subtree swap
overhead. (scan all swapped subtrees)
[[Benchmark]]
Hardware:
VM 4G vRAM, 8 vCPUs,
disk is using 'unsafe' cache mode,
backing device is SAMSUNG 850 evo SSD.
Host has 16G ram.
Mkfs parameter:
--nodesize 4K (To bump up tree size)
Initial subvolume contents:
4G data copied from /usr and /lib.
(With enough regular small files)
Snapshots:
16 snapshots of the original subvolume.
each snapshot has 3 random files modified.
balance parameter:
-m
So the content should be pretty similar to a real world root fs layout.
And after file system population, there is no other activity, so it
should be the best case scenario.
| v4.20-rc1 | w/ patchset | diff
-----------------------------------------------------------------------
relocated extents | 22615 | 22457 | -0.1%
qgroup dirty extents | 163457 | 121606 | -25.6%
time (sys) | 22.884s | 18.842s | -17.6%
time (real) | 27.724s | 22.884s | -17.5%
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:16 +0000 (15:15 +0800)]
btrfs: qgroup: Introduce per-root swapped blocks infrastructure
To allow delayed subtree swap rescan, btrfs needs to record per-root
information about which tree blocks get swapped. This patch introduces
the required infrastructure.
The designed workflow will be:
1) Record the subtree root block that gets swapped.
During subtree swap:
O = Old tree blocks
N = New tree blocks
reloc tree subvolume tree X
Root Root
/ \ / \
NA OB OA OB
/ | | \ / | | \
NC ND OE OF OC OD OE OF
In this case, NA and OA are going to be swapped, record (NA, OA) into
subvolume tree X.
2) After subtree swap.
reloc tree subvolume tree X
Root Root
/ \ / \
OA OB NA OB
/ | | \ / | | \
OC OD OE OF NC ND OE OF
3a) COW happens for OB
If we are going to COW tree block OB, we check OB's bytenr against
tree X's swapped_blocks structure.
If it doesn't fit any, nothing will happen.
3b) COW happens for NA
Check NA's bytenr against tree X's swapped_blocks, and get a hit.
Then we do subtree scan on both subtrees OA and NA.
Resulting 6 tree blocks to be scanned (OA, OC, OD, NA, NC, ND).
Then no matter what we do to subvolume tree X, qgroup numbers will
still be correct.
Then NA's record gets removed from X's swapped_blocks.
4) Transaction commit
Any record in X's swapped_blocks gets removed, since there is no
modification to swapped subtrees, no need to trigger heavy qgroup
subtree rescan for them.
This will introduce 128 bytes overhead for each btrfs_root even qgroup
is not enabled. This is to reduce memory allocations and potential
failures.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:15 +0000 (15:15 +0800)]
btrfs: qgroup: Refactor btrfs_qgroup_trace_subtree_swap
Refactor btrfs_qgroup_trace_subtree_swap() into
qgroup_trace_subtree_swap(), which only needs two extent buffer and some
other bool to control the behavior.
This provides the basis for later delayed subtree scan work.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Qu Wenruo [Wed, 23 Jan 2019 07:15:14 +0000 (15:15 +0800)]
btrfs: relocation: Delay reloc tree deletion after merge_reloc_roots
Relocation code will drop btrfs_root::reloc_root as soon as
merge_reloc_root() finishes.
However later qgroup code will need to access btrfs_root::reloc_root
after merge_reloc_root() for delayed subtree rescan.
So alter the timming of resetting btrfs_root:::reloc_root, make it
happens after transaction commit.
With this patch, we will introduce a new btrfs_root::state,
BTRFS_ROOT_DEAD_RELOC_TREE, to info part of btrfs_root::reloc_tree user
that although btrfs_root::reloc_tree is still non-NULL, but still it's
not used any more.
The lifespan of btrfs_root::reloc tree will become:
Old behavior | New
------------------------------------------------------------------------
btrfs_init_reloc_root() --- | btrfs_init_reloc_root() ---
set reloc_root | | set reloc_root |
| | |
| | |
merge_reloc_root() | | merge_reloc_root() |
|- btrfs_update_reloc_root() --- | |- btrfs_update_reloc_root() -+-
clear btrfs_root::reloc_root | set ROOT_DEAD_RELOC_TREE |
| record root into dirty |
| roots rbtree |
| |
| reloc_block_group() Or |
| btrfs_recover_relocation() |
| | After transaction commit |
| |- clean_dirty_subvols() ---
| clear btrfs_root::reloc_root
During ROOT_DEAD_RELOC_TREE set lifespan, the only user of
btrfs_root::reloc_tree should be qgroup.
Since reloc root needs a longer life-span, this patch will also delay
btrfs_drop_snapshot() call.
Now btrfs_drop_snapshot() is called in clean_dirty_subvols().
This patch will increase the size of btrfs_root by 16 bytes.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:05:42 +0000 (14:05 -0500)]
btrfs: call btrfs_create_pending_block_groups unconditionally
The first thing we do is loop through the list, this
if (!list_empty())
btrfs_create_pending_block_groups();
thing is just wasted space.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:05:40 +0000 (14:05 -0500)]
btrfs: make btrfs_destroy_delayed_refs use btrfs_delete_ref_head
Instead of open coding this stuff use the helper instead.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Josef Bacik [Wed, 21 Nov 2018 19:05:39 +0000 (14:05 -0500)]
btrfs: make btrfs_destroy_delayed_refs use btrfs_delayed_ref_lock
We have this open coded in btrfs_destroy_delayed_refs, use the helper
instead.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 3 Jan 2019 08:17:40 +0000 (16:17 +0800)]
btrfs: scrub: print messages when started or finished
The kernel log messages help debugging and audit, add them for scrub
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
David Sterba [Thu, 17 Jan 2019 16:15:18 +0000 (17:15 +0100)]
btrfs: simplify workqueue name when allocating
The workqueue name is constructed from a format string but the prefix
does not need to be set by %s.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Sat, 19 Jan 2019 06:48:55 +0000 (14:48 +0800)]
btrfs: merge btrfs_find_device and find_device
Both btrfs_find_device() and find_device() does the same thing except
that the latter does not take the seed device onto account in the device
scanning context. We can merge them.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Fri, 4 Jan 2019 05:31:53 +0000 (13:31 +0800)]
btrfs: refactor btrfs_free_stale_devices() to get return value
Preparatory patch to add ioctl that allows to forget a device (ie.
reverse of scan).
Refactors btrfs_free_stale_devices() to obtain return status. As this
function can fail if it can't find the given path (returns -ENOENT) or
trying to delete a mounted device (returns -EBUSY).
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 17 Jan 2019 15:32:31 +0000 (23:32 +0800)]
btrfs: refactor btrfs_find_device() take fs_devices as argument
btrfs_find_device() accepts fs_info as an argument and retrieves
fs_devices from fs_info.
Instead use fs_devices, so that this function can be used in non-mount
(during device scanning) context as well.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 17 Jan 2019 15:32:29 +0000 (23:32 +0800)]
btrfs: cleanup btrfs_find_device_by_devspec()
btrfs_find_device_by_devspec() finds the device by @devid or by
@device_path. This patch makes code flow easy to read by open coding the
else part and renames devpath to device_path.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Anand Jain [Thu, 17 Jan 2019 15:32:28 +0000 (23:32 +0800)]
btrfs: merge btrfs_find_device_missing_or_by_path() into parent
btrfs_find_device_missing_or_by_path() is relatively small function, and
its only parent btrfs_find_device_by_devspec() is small as well. Besides
there are a number of find_device functions. Merge
btrfs_find_device_missing_or_by_path() into its parent.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 17 Dec 2018 08:36:02 +0000 (10:36 +0200)]
btrfs: Remove not_found_em label from btrfs_get_extent
In order to avoid duplicating init code for em there is an additional
label, not_found_em, which is used to only set ->block_start. The only
case when it will be used is if the extent we are adding overlaps with
an existing extent. Make that case more obvious by:
1. Adding a comment hinting at what's going on
2. Assigning EXTENT_MAP_HOLE and directly going to insert.
No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 17 Dec 2018 09:49:00 +0000 (11:49 +0200)]
btrfs: Consolidate retval checking of core btree functions
Core btree functions in btrfs generally return 0 when an item is found,
1 in case the sought item cannot be found and <0 when an error happens.
Consolidate the checks for those conditions in one 'if () {} else if ()
{}' construct rather than 2 separate 'if () {}' statements. This
emphasizes that the handling code pertains to a single function. No
functional changes.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Mon, 17 Dec 2018 08:35:59 +0000 (10:35 +0200)]
btrfs: Rename found_type to extent_type in btrfs_get_extent
found_type really holds the type of extent and is guaranteed to to have
a value between [0, 2]. The only time it can contain anything different
is if btrfs_lookup_file_extent returned a positive value and the
previous item is different than an extent. Avoid this situation by
simply checking found_key.type rather than assigning the item type to
found_type intermittently. Also make the variable an u8 to reduce stack
usage. No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Wed, 12 Dec 2018 18:05:56 +0000 (18:05 +0000)]
Btrfs: move duplicated nodatasum check into common reflink/dedupe helper
Move the check that verifies if both inodes have checksums disabled or
both have them enabled, from the clone and deduplication functions into
the new common helper btrfs_remap_file_range_prep().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Tue, 8 Jan 2019 14:53:46 +0000 (16:53 +0200)]
btrfs: Remove impossible condition from mergable_maps
We can never have extents marked as EXTENT_MAP_DELALLOC since this
value is only ever used by btrfs_get_extent_fiemap. In this case the
extent map is created by btrfs_get_extent_fiemap and is never really
published, this flag is used to return the corresponding userspace one.
Considering this, it's pointless having a check for EXTENT_MAP_DELALLOC
in mergable_maps. Just remove it.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 8 Jan 2019 11:42:01 +0000 (11:42 +0000)]
Btrfs: do not overwrite error return value in the balance ioctl
If the call to btrfs_balance() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_balance()
returned success or was canceled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 8 Jan 2019 11:42:09 +0000 (11:42 +0000)]
Btrfs: do not overwrite error return value in the device replace ioctl
If the call to btrfs_dev_replace_by_ioctl() failed we would overwrite the
error returned to user space with -EFAULT if the call to copy_to_user()
failed as well. Fix that by calling copy_to_user() only if no error
happened before or a device replace operation was canceled.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Tue, 8 Jan 2019 11:43:18 +0000 (11:43 +0000)]
Btrfs: remove redundant check for swapfiles when reflinking
Checking if either of the inodes corresponds to a swapfile is already
performed by generic_remap_file_range_prep(), so we do not need to do
it in the btrfs clone and deduplication functions.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:50:05 +0000 (10:50 +0200)]
btrfs: Refactor shrink_delalloc
Add a couple of comments regarding the logic flow in shrink_delalloc.
Then, cease using max_reclaim as a temporary variable when calculating
nr_pages. Finally give max_reclaim a more becoming name, which
uneqivocally shows at what this variable really holds. No functional
changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:50:03 +0000 (10:50 +0200)]
btrfs: Document logic regarding inode in async_cow_submit
Add a comment explaining when ->inode could be NULL and why we always
perform the ->async_delalloc_pages modification.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:50:02 +0000 (10:50 +0200)]
btrfs: Remove WARN_ON in btrfs_alloc_delalloc_work
It can never trigger since before calling alloc_delalloc_work we have
called igrab in start_delalloc_inodes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:50:01 +0000 (10:50 +0200)]
btrfs: Use ihold instead of igrab in cow_file_range_async
ihold is supposed to be used when the caller already has a reference to
the inode. In the case of cow_file_range_async this invariants holds,
since the 3 call chains leading to this function all take a reference:
btrfs_writepage <--- does igrab
extent_write_full_page
__extent_writepage
writepage_delalloc
btrfs_run_delalloc_range
cow_file_range_async
extent_write_cache_pages <--- does igrab
__extent_writepage (same callchain as above)
and
submit_compressed_extents <-- already called from async CoW submit path,
which would have done ihold.
extent_write_locked_range
__extent_writepage
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:50:00 +0000 (10:50 +0200)]
btrfs: Remove isize local variable in compress_file_range
It's used only once so just inline the call to i_size_read. The
semantics regarding the inode size are not changed, the pages in the
range are locked and i_size cannot change between the time it was set
and used.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Thu, 3 Jan 2019 08:49:59 +0000 (10:49 +0200)]
btrfs: Remove inode argument from async_cow_submit
We already pass the async_cow struct that holds a reference to the
inode. Exploit this fact and remove the extra inode argument. No
functional changes.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
YueHaibing [Sat, 15 Dec 2018 06:31:07 +0000 (06:31 +0000)]
btrfs: remove set but not used variable 'num_pages'
Fixes gcc '-Wunused-but-set-variable' warning:
fs/btrfs/ioctl.c: In function 'btrfs_extent_same':
fs/btrfs/ioctl.c:3260:6: warning:
variable 'num_pages' set but not used [-Wunused-but-set-variable]
It not used any more since commit
9ee8234e6220 ("Btrfs: use
generic_remap_file_range_prep() for cloning and deduplication")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 12 Dec 2018 07:42:34 +0000 (09:42 +0200)]
btrfs: Remove redundant assignment in btrfs_get_extent_fiemap
hole_len is only used if the hole falls within the requested range. Make
that explicitly clear by only assigning in the corresponding branch.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 12 Dec 2018 07:42:33 +0000 (09:42 +0200)]
btrfs: Refactor btrfs_get_extent_fiemap
Make btrfs_get_extent_fiemap a bit more friendly. First step is to
rename the closely related, yet arbitrary named
range_start/found_end/found variables. They define the delalloc range
that is found in case a real extent wasn't found. Subsequently remove
an unnecessary check for hole_em since it's guaranteed to be set i.e the
check is always true. Top it off by giving all comments a refresh.
No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ reformatted a few more comments ]
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 12 Dec 2018 07:42:32 +0000 (09:42 +0200)]
btrfs: Remove unused arguments from btrfs_get_extent_fiemap
This function is a simple wrapper over btrfs_get_extent that returns
either:
a) A real extent in the passed range or
b) Adjusted extent based on whether delalloc bytes are found backing up
a hole.
To support these semantics it doesn't need the page/pg_offset/create
arguments which are passed to btrfs_get_extent in case an extent is to
be created. So simplify the function by removing the unused arguments.
No functional changes.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 13 Dec 2018 21:16:56 +0000 (21:16 +0000)]
Btrfs: setup a nofs context for memory allocation at __btrfs_set_acl
We are holding a transaction handle when setting an acl, therefore we can
not allocate the xattr value buffer using GFP_KERNEL, as we could deadlock
if reclaim is triggered by the allocation, therefore setup a nofs context.
Fixes:
39a27ec1004e8 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Thu, 13 Dec 2018 21:16:45 +0000 (21:16 +0000)]
Btrfs: setup a nofs context for memory allocation at btrfs_create_tree()
We are holding a transaction handle when creating a tree, therefore we can
not allocate the root using GFP_KERNEL, as we could deadlock if reclaim is
triggered by the allocation, therefore setup a nofs context.
Fixes:
74e4d82757f74 ("btrfs: let callers of btrfs_alloc_root pass gfp flags")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 14 Dec 2018 19:45:22 +0000 (19:45 +0000)]
Btrfs: do not overwrite error return value in the get device stats ioctl
If the call to btrfs_get_dev_stats() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_get_dev_stats()
returned success.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 14 Dec 2018 19:45:13 +0000 (19:45 +0000)]
Btrfs: do not overwrite error return value in scrub progress ioctl
If the call to btrfs_scrub_progress() failed we would overwrite the error
returned to user space with -EFAULT if the call to copy_to_user() failed
as well. Fix that by calling copy_to_user() only if btrfs_scrub_progress()
returned success.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe Manana [Fri, 14 Dec 2018 19:50:17 +0000 (19:50 +0000)]
Btrfs: do not overwrite scrub error with fault error in scrub ioctl
If scrub returned an error and then the copy_to_user() call did not
succeed, we would overwrite the error returned by scrub with -EFAULT.
Fix that by calling copy_to_user() only if btrfs_scrub_dev() returned
success.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Nikolay Borisov [Wed, 19 Dec 2018 07:50:20 +0000 (09:50 +0200)]
btrfs: Make first argument of btrfs_run_delalloc_range directly an inode
Since this function is no longer a callback there is no need to have
its first argument obfuscated with a void *. Change it directly to a
pointer to an inode. No functional changes.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Julia Lawall [Sun, 23 Dec 2018 08:57:06 +0000 (09:57 +0100)]
Btrfs: drop useless LIST_HEAD in merge_reloc_root
Drop LIST_HEAD where the variable it declares is never used.
The uses were removed in
3fd0a5585eb9 ("Btrfs: Metadata ENOSPC
handling for balance"), but not the declaration.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Linus Torvalds [Mon, 25 Feb 2019 00:46:45 +0000 (16:46 -0800)]
Linux 5.0-rc8
Linus Torvalds [Sun, 24 Feb 2019 17:47:07 +0000 (09:47 -0800)]
Merge tag 'for-linus' of git://git./virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"Bug fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: MMU: record maximum physical address width in kvm_mmu_extended_role
kvm: x86: Return LA57 feature based on hardware capability
x86/kvm/mmu: fix switch between root and guest MMUs
s390: vsie: Use effective CRYCBD.31 to check CRYCBD validity
Linus Torvalds [Sun, 24 Feb 2019 17:28:26 +0000 (09:28 -0800)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
"Hopefully the last pull request for this release. Fingers crossed:
1) Only refcount ESP stats on full sockets, from Martin Willi.
2) Missing barriers in AF_UNIX, from Al Viro.
3) RCU protection fixes in ipv6 route code, from Paolo Abeni.
4) Avoid false positives in untrusted GSO validation, from Willem de
Bruijn.
5) Forwarded mesh packets in mac80211 need more tailroom allocated,
from Felix Fietkau.
6) Use operstate consistently for linkup in team driver, from George
Wilkie.
7) ThunderX bug fixes from Vadim Lomovtsev. Mostly races between VF
and PF code paths.
8) Purge ipv6 exceptions during netdevice removal, from Paolo Abeni.
9) nfp eBPF code gen fixes from Jiong Wang.
10) bnxt_en firmware timeout fix from Michael Chan.
11) Use after free in udp/udpv6 error handlers, from Paolo Abeni.
12) Fix a race in x25_bind triggerable by syzbot, from Eric Dumazet"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (65 commits)
net: phy: realtek: Dummy IRQ calls for RTL8366RB
tcp: repaired skbs must init their tso_segs
net/x25: fix a race in x25_bind()
net: dsa: Remove documentation for port_fdb_prepare
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
selftests: fib_tests: sleep after changing carrier. again.
net: set static variable an initial value in atl2_probe()
net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G
bpf, doc: add bpf list as secondary entry to maintainers file
udp: fix possible user after free in error handler
udpv6: fix possible user after free in error handler
fou6: fix proto error handler argument type
udpv6: add the required annotation to mib type
mdio_bus: Fix use-after-free on device_register fails
net: Set rtm_table to RT_TABLE_COMPAT for ipv6 for tables > 255
bnxt_en: Wait longer for the firmware message response to complete.
bnxt_en: Fix typo in firmware message timeout logic.
nfp: bpf: fix ALU32 high bits clearance bug
nfp: bpf: fix code-gen bug on BPF_ALU | BPF_XOR | BPF_K
Documentation: networking: switchdev: Update port parent ID section
...
Linus Walleij [Sun, 24 Feb 2019 00:11:15 +0000 (01:11 +0100)]
net: phy: realtek: Dummy IRQ calls for RTL8366RB
This fixes a regression introduced by
commit
0d2e778e38e0ddffab4bb2b0e9ed2ad5165c4bf7
"net: phy: replace PHY_HAS_INTERRUPT with a check for
config_intr and ack_interrupt".
This assumes that a PHY cannot trigger interrupt unless
it has .config_intr() or .ack_interrupt() implemented.
A later patch makes the code assume both need to be
implemented for interrupts to be present.
But this PHY (which is inside a DSA) will happily
fire interrupts without either callback.
Implement dummy callbacks for .config_intr() and
.ack_interrupt() in the phy header to fix this.
Tested on the RTL8366RB on D-Link DIR-685.
Fixes:
0d2e778e38e0 ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 23 Feb 2019 23:51:51 +0000 (15:51 -0800)]
tcp: repaired skbs must init their tso_segs
syzbot reported a WARN_ON(!tcp_skb_pcount(skb))
in tcp_send_loss_probe() [1]
This was caused by TCP_REPAIR sent skbs that inadvertenly
were missing a call to tcp_init_tso_segs()
[1]
WARNING: CPU: 1 PID: 0 at net/ipv4/tcp_output.c:2534 tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc7+ #77
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
panic+0x2cb/0x65c kernel/panic.c:214
__warn.cold+0x20/0x45 kernel/panic.c:571
report_bug+0x263/0x2b0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
fixup_bug arch/x86/kernel/traps.c:173 [inline]
do_error_trap+0x11b/0x200 arch/x86/kernel/traps.c:271
do_invalid_op+0x37/0x50 arch/x86/kernel/traps.c:290
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:973
RIP: 0010:tcp_send_loss_probe+0x771/0x8a0 net/ipv4/tcp_output.c:2534
Code: 88 fc ff ff 4c 89 ef e8 ed 75 c8 fb e9 c8 fc ff ff e8 43 76 c8 fb e9 63 fd ff ff e8 d9 75 c8 fb e9 94 f9 ff ff e8 bf 03 91 fb <0f> 0b e9 7d fa ff ff e8 b3 03 91 fb 0f b6 1d 37 43 7a 03 31 ff 89
RSP: 0018:
ffff8880ae907c60 EFLAGS:
00010206
RAX:
ffff8880a989c340 RBX:
0000000000000000 RCX:
ffffffff85dedbdb
RDX:
0000000000000100 RSI:
ffffffff85dee0b1 RDI:
0000000000000005
RBP:
ffff8880ae907c90 R08:
ffff8880a989c340 R09:
ffffed10147d1ae1
R10:
ffffed10147d1ae0 R11:
ffff8880a3e8d703 R12:
ffff888091b90040
R13:
ffff8880a3e8d540 R14:
0000000000008000 R15:
ffff888091b90860
tcp_write_timer_handler+0x5c0/0x8a0 net/ipv4/tcp_timer.c:583
tcp_write_timer+0x10e/0x1d0 net/ipv4/tcp_timer.c:607
call_timer_fn+0x190/0x720 kernel/time/timer.c:1325
expire_timers kernel/time/timer.c:1362 [inline]
__run_timers kernel/time/timer.c:1681 [inline]
__run_timers kernel/time/timer.c:1649 [inline]
run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694
__do_softirq+0x266/0x95a kernel/softirq.c:292
invoke_softirq kernel/softirq.c:373 [inline]
irq_exit+0x180/0x1d0 kernel/softirq.c:413
exiting_irq arch/x86/include/asm/apic.h:536 [inline]
smp_apic_timer_interrupt+0x14a/0x570 arch/x86/kernel/apic/apic.c:1062
apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807
</IRQ>
RIP: 0010:native_safe_halt+0x2/0x10 arch/x86/include/asm/irqflags.h:58
Code: ff ff ff 48 89 c7 48 89 45 d8 e8 59 0c a1 fa 48 8b 45 d8 e9 ce fe ff ff 48 89 df e8 48 0c a1 fa eb 82 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:
ffff8880a98afd78 EFLAGS:
00000286 ORIG_RAX:
ffffffffffffff13
RAX:
1ffffffff1125061 RBX:
ffff8880a989c340 RCX:
0000000000000000
RDX:
dffffc0000000000 RSI:
0000000000000001 RDI:
ffff8880a989cbbc
RBP:
ffff8880a98afda8 R08:
ffff8880a989c340 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000001
R13:
ffffffff889282f8 R14:
0000000000000001 R15:
0000000000000000
arch_cpu_idle+0x10/0x20 arch/x86/kernel/process.c:555
default_idle_call+0x36/0x90 kernel/sched/idle.c:93
cpuidle_idle_call kernel/sched/idle.c:153 [inline]
do_idle+0x386/0x570 kernel/sched/idle.c:262
cpu_startup_entry+0x1b/0x20 kernel/sched/idle.c:353
start_secondary+0x404/0x5c0 arch/x86/kernel/smpboot.c:271
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
Kernel Offset: disabled
Rebooting in 86400 seconds..
Fixes:
79861919b889 ("tcp: fix TCP_REPAIR xmit queue setup")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 23 Feb 2019 21:24:59 +0000 (13:24 -0800)]
net/x25: fix a race in x25_bind()
syzbot was able to trigger another soft lockup [1]
I first thought it was the O(N^2) issue I mentioned in my
prior fix (
f657d22ee1f "net/x25: do not hold the cpu
too long in x25_new_lci()"), but I eventually found
that x25_bind() was not checking SOCK_ZAPPED state under
socket lock protection.
This means that multiple threads can end up calling
x25_insert_socket() for the same socket, and corrupt x25_list
[1]
watchdog: BUG: soft lockup - CPU#0 stuck for 123s! [syz-executor.2:10492]
Modules linked in:
irq event stamp: 27515
hardirqs last enabled at (27514): [<
ffffffff81006673>] trace_hardirqs_on_thunk+0x1a/0x1c
hardirqs last disabled at (27515): [<
ffffffff8100668f>] trace_hardirqs_off_thunk+0x1a/0x1c
softirqs last enabled at (32): [<
ffffffff8632ee73>] x25_get_neigh+0xa3/0xd0 net/x25/x25_link.c:336
softirqs last disabled at (34): [<
ffffffff86324bc3>] x25_find_socket+0x23/0x140 net/x25/af_x25.c:341
CPU: 0 PID: 10492 Comm: syz-executor.2 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__sanitizer_cov_trace_pc+0x4/0x50 kernel/kcov.c:97
Code: f4 ff ff ff e8 11 9f ea ff 48 c7 05 12 fb e5 08 00 00 00 00 e9 c8 e9 ff ff 90 90 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 <48> 8b 75 08 65 48 8b 04 25 40 ee 01 00 65 8b 15 38 0c 92 7e 81 e2
RSP: 0018:
ffff88806e94fc48 EFLAGS:
00000286 ORIG_RAX:
ffffffffffffff13
RAX:
1ffff1100d84dac5 RBX:
0000000000000001 RCX:
ffffc90006197000
RDX:
0000000000040000 RSI:
ffffffff86324bf3 RDI:
ffff88806c26d628
RBP:
ffff88806e94fc48 R08:
ffff88806c1c6500 R09:
fffffbfff1282561
R10:
fffffbfff1282560 R11:
ffffffff89412b03 R12:
ffff88806c26d628
R13:
ffff888090455200 R14:
dffffc0000000000 R15:
0000000000000000
FS:
00007f3a107e4700(0000) GS:
ffff8880ae800000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007f3a107e3db8 CR3:
00000000a5544000 CR4:
00000000001406f0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
__x25_find_socket net/x25/af_x25.c:327 [inline]
x25_find_socket+0x7d/0x140 net/x25/af_x25.c:342
x25_new_lci net/x25/af_x25.c:355 [inline]
x25_connect+0x380/0xde0 net/x25/af_x25.c:784
__sys_connect+0x266/0x330 net/socket.c:1662
__do_sys_connect net/socket.c:1673 [inline]
__se_sys_connect net/socket.c:1670 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1670
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f3a107e3c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002a
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457e29
RDX:
0000000000000012 RSI:
0000000020000200 RDI:
0000000000000005
RBP:
000000000073c040 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f3a107e46d4
R13:
00000000004be362 R14:
00000000004ceb98 R15:
00000000ffffffff
Sending NMI from CPU 0 to CPUs 1:
NMI backtrace for cpu 1
CPU: 1 PID: 10493 Comm: syz-executor.3 Not tainted 5.0.0-rc7+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:__read_once_size include/linux/compiler.h:193 [inline]
RIP: 0010:queued_write_lock_slowpath+0x143/0x290 kernel/locking/qrwlock.c:86
Code: 4c 8d 2c 01 41 83 c7 03 41 0f b6 45 00 41 38 c7 7c 08 84 c0 0f 85 0c 01 00 00 8b 03 3d 00 01 00 00 74 1a f3 90 41 0f b6 55 00 <41> 38 d7 7c eb 84 d2 74 e7 48 89 df e8 cc aa 4e 00 eb dd be 04 00
RSP: 0018:
ffff888085c47bd8 EFLAGS:
00000206
RAX:
0000000000000300 RBX:
ffffffff89412b00 RCX:
1ffffffff1282560
RDX:
0000000000000000 RSI:
0000000000000004 RDI:
ffffffff89412b00
RBP:
ffff888085c47c70 R08:
1ffffffff1282560 R09:
fffffbfff1282561
R10:
fffffbfff1282560 R11:
ffffffff89412b03 R12:
00000000000000ff
R13:
fffffbfff1282560 R14:
1ffff11010b88f7d R15:
0000000000000003
FS:
00007fdd04086700(0000) GS:
ffff8880ae900000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007fdd04064db8 CR3:
0000000090be0000 CR4:
00000000001406e0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
queued_write_lock include/asm-generic/qrwlock.h:104 [inline]
do_raw_write_lock+0x1d6/0x290 kernel/locking/spinlock_debug.c:203
__raw_write_lock_bh include/linux/rwlock_api_smp.h:204 [inline]
_raw_write_lock_bh+0x3b/0x50 kernel/locking/spinlock.c:312
x25_insert_socket+0x21/0xe0 net/x25/af_x25.c:267
x25_bind+0x273/0x340 net/x25/af_x25.c:703
__sys_bind+0x23f/0x290 net/socket.c:1481
__do_sys_bind net/socket.c:1492 [inline]
__se_sys_bind net/socket.c:1490 [inline]
__x64_sys_bind+0x73/0xb0 net/socket.c:1490
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457e29
Fixes:
90c27297a9bf ("X.25 remove bkl in bind")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: andrew hendry <andrew.hendry@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hauke Mehrtens [Fri, 22 Feb 2019 19:07:45 +0000 (20:07 +0100)]
net: dsa: Remove documentation for port_fdb_prepare
This callback was removed some time ago, also remove the documentation.
Fixes:
1b6dd556c304 ("net: dsa: Remove prepare phase for FDB")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 22 Feb 2019 13:22:32 +0000 (21:22 +0800)]
Revert "bridge: do not add port to router list when receives query with source 0.0.0.0"
This reverts commit
5a2de63fd1a5 ("bridge: do not add port to router list
when receives query with source 0.0.0.0") and commit
0fe5119e267f ("net:
bridge: remove ipv6 zero address check in mcast queries")
The reason is RFC 4541 is not a standard but suggestive. Currently we
will elect 0.0.0.0 as Querier if there is no ip address configured on
bridge. If we do not add the port which recives query with source
0.0.0.0 to router list, the IGMP reports will not be about to forward
to Querier, IGMP data will also not be able to forward to dest.
As Nikolay suggested, revert this change first and add a boolopt api
to disable none-zero election in future if needed.
Reported-by: Linus Lüssing <linus.luessing@c0d3.blue>
Reported-by: Sebastian Gottschall <s.gottschall@newmedia-net.de>
Fixes:
5a2de63fd1a5 ("bridge: do not add port to router list when receives query with source 0.0.0.0")
Fixes:
0fe5119e267f ("net: bridge: remove ipv6 zero address check in mcast queries")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thadeu Lima de Souza Cascardo [Fri, 22 Feb 2019 10:27:41 +0000 (07:27 -0300)]
selftests: fib_tests: sleep after changing carrier. again.
Just like commit
e2ba732a1681 ("selftests: fib_tests: sleep after
changing carrier"), wait one second to allow linkwatch to propagate the
carrier change to the stack.
There are two sets of carrier tests. The first slept after the carrier
was set to off, and when the second set ran, it was likely that the
linkwatch would be able to run again without much delay, reducing the
likelihood of a race. However, if you run 'fib_tests.sh -t carrier' on a
loop, you will quickly notice the failures.
Sleeping on the second set of tests make the failures go away.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mao Wenan [Fri, 22 Feb 2019 06:57:23 +0000 (14:57 +0800)]
net: set static variable an initial value in atl2_probe()
cards_found is a static variable, but when it enters atl2_probe(),
cards_found is set to zero, the value is not consistent with last probe,
so next behavior is not our expect.
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maxime Chevallier [Thu, 21 Feb 2019 16:54:11 +0000 (17:54 +0100)]
net: phy: marvell10g: Fix Multi-G advertisement to only advertise 10G
Some Marvell Alaska PHYs support 2.5G, 5G and 10G BaseT links. Their
default behaviour is to advertise all of these modes, but at the moment,
only 10GBaseT is supported. To prevent link partners from establishing
link at that speed, clear these modes upon configuring aneg parameters.
Fixes:
20b2af32ff3f ("net: phy: add Marvell Alaska X 88X3310 10Gigabit PHY support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reported-by: Russell King <linux@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
projects / platform / kernel / linux-rpi.git / log