drm/udl: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The driver's
probe function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-9-tzimmermann@suse.de

drm/tilcdc: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-8-tzimmermann@suse.de

drm/mgag200: Set up fbdev after registering device; remove error checks

Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-7-tzimmermann@suse.de

drm/mediatek: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The function
will print a warning.

v2:
* fix subject line

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-6-tzimmermann@suse.de

drm/ingenic: Remove error check from fbdev setup

Remove the error check from the fbdev setup function. The function
will print a warning.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-5-tzimmermann@suse.de

drm/kirin: Set up fbdev after fully registering device

Generic fbdev support is a DRM client. Set it up after fully registering
the new DRM device.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-4-tzimmermann@suse.de

drm/hibmc: Remove error check from fbdev setup

Generic fbdev support is a DRM client. Remove the error check as the
driver's probe function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-3-tzimmermann@suse.de

drm/ast: Set up fbdev after registering device; remove error checks

Generic fbdev support is a DRM client. Set it up after registering
the new DRM device. Remove the error checks as the driver's probe
function should not depend on a DRM client's state.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408082641.590-2-tzimmermann@suse.de

drm/ttm: clean up ttm_trace_dma_map/ttm_trace_dma_unmap (v2)

ttm_trace_dma_map/ttm_trace_dma_unmap is never used anymore.

v2: remove the file completely

Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/360432/

drm/panel: nt39016: Add support for 50 Hz refresh rate

By changing the pixel clock and the length of the back porch, it is
possible to obtain a perfect 50 Hz refresh rate.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408095830.8131-2-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm/panel: nt39016: Add support for multiple modes

Add support for multiple drm_display_mode entries. This will allow to
add a 50 Hz mode later.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408095830.8131-1-paul@crapouillou.net
Acked-by: Sam Ravnborg <sam@ravnborg.org>

video: fbdev: mb862xx: remove set but not used variable 'mdr'

Fix the following gcc warning:

drivers/video/fbdev/mb862xx/mb862xxfb_accel.c:187:6: warning: variable
‘mdr’ set but not used [-Wunused-but-set-variable]
  int mdr;
      ^~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403022553.33320-1-yanaijie@huawei.com

video: fbdev: matroxfb: remove dead code and set but not used variable

Fix the following gcc warning:

drivers/video/fbdev/matrox/g450_pll.c:336:15: warning: variable
‘pixel_vco’ set but not used [-Wunused-but-set-variable]
  unsigned int pixel_vco;
               ^~~~~~~~~

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403021609.20968-1-yanaijie@huawei.com

drm/panel: add panel driver for Leadtek LTK050H3146W

The LTK050H3146W is 5.0" 720x1280 DSI display. There are two variants
with essentially the same name, LTK050H3146W and LTK050H3146W-A2.

They differ in their init sequence and mode details.

changes in v2:
- add display variants
changes in v3:
- fixed indentation and artifacts found by Sam

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200408085317.2624599-2-heiko@sntech.de

dt-bindings: display: panel: Add binding document for Leadtek LTK050H3146W

The LTK050H3146W is a 5.0" 720x1280 DSI display.

changes in v2:
- add display variants

Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200407232351.2547750-1-heiko@sntech.de

dt-bindings: display: rockchip-vop: add additional properties

In the old txt situation we add/describe only properties that are used
by the driver/hardware itself. With yaml it also filters things in a
node that are used by other drivers like 'assigned-clocks' and
'assigned-clock-rates' for rk3399 and 'power-domains' for most
Rockchip Socs in 'vop' nodes, so add them to 'rockchip-vop.yaml'.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142235.8870-2-jbx6244@gmail.com

dt-bindings: display: convert rockchip vop bindings to yaml

Current dts files with 'vop' nodes are manually verified.
In order to automate this process rockchip-vop.txt
has to be converted to yaml.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142235.8870-1-jbx6244@gmail.com

MAINTAINERS: Update feiyang,st7701 panel bindings converted as YAML

The feiyang,fy07024di26a30d.txt and sitronix,st7701.txt has been
converted to YAML schemas, update MAINTAINERS to match them again.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-3-jagan@amarulasolutions.com

dt-bindings: display: panel: Convert sitronix,st7701 to DT schema

Convert the sitronix,st7701 panel bindings to DT schema.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-2-jagan@amarulasolutions.com

dt-bindings: display: panel: Convert feiyang,fy07024di26a30d to DT schema

Convert the feiyang,fy07024di26a30d panel bindings to DT schema.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403142453.25307-1-jagan@amarulasolutions.com

video: Add missing annotation for cyber2000fb_enable_ddc() and cyber2000fb_disable_ddc()

Sparse reports warnings at cyber2000fb_enable_ddc()
and cyber2000fb_disable_ddc()

warning: context imbalance in cyber2000fb_enable_ddc()
- wrong count at exit

warning: context imbalance in cyber2000fb_disable_ddc()
- unexpected unlock

The root cause is the missing annotation at cyber2000fb_enable_ddc()
and cyber2000fb_disable_ddc()

Add the missing __acquires(&cfb->reg_b0_lock) annotation
Add the missing __releases(&cfb->reg_b0_lock) annotation

Signed-off-by: Jules Irenge <jbi.octave@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403160505.2832-3-jbi.octave@gmail.com

drm/ingenic: Delete an error message in ingenic_drm_probe()

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://patchwork.freedesktop.org/patch/msgid/e03e7106-0f22-99c4-ad21-b288e8990b5a@web.de

drm/dp_mst: Remove drm_dp_mst_has_audio()

Drive-by fix I noticed the other day - drm_dp_mst_has_audio() only ever
made sense back when we still had to validate ports before accessing
them in order to (attempt to) avoid NULL dereferences. Since we have
proper reference counting that guarantees we always can safely access
the MST port, there's no use in keeping this function around as all it
does is validate the port pointer before checking the audio status.

Note - drm_dp_mst_port->has_audio is technically protected by
drm_device->mode_config.connection_mutex, since it's only ever updated
from drm_dp_mst_get_edid(). Additionally, we change the declaration for
port in struct intel_connector to be properly typed, so we can directly
access it.

Changes since v1:
* Change type of intel_connector->port in a separate patch - Sean Paul

Cc: "Lee, Shawn C" <shawn.c.lee@intel.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-2-lyude@redhat.com

drm/i915/dp_mst: Cast intel_connector->port as drm_dp_mst_port

The only reason for having this cast as void * before was because we
originally needed to use drm_dp_mst_get_port_validated() and friends in
order to (attempt to) safely access MST ports. However, we've since
improved how reference counting works with ports and mstbs such that we
can now rely on drm_dp_mst_port structs remaining in memory for as long
as the driver needs. This means we don't really need to cast this as
void* anymore, and can just access the struct directly.

We'll also need this for the next commit, so that we can remove
drm_dp_mst_port_has_audio().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Sean Paul <sean@poorly.run>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406200646.1263435-1-lyude@redhat.com

video: fbdev: don't print error message on platform_get_irq() failure

The platform_get_irq() can print error message, so remove the redundant
dev_err() here.

Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406053450.8380-1-tangbin@cmss.chinamobile.com

drm/vblank: Add intro to documentation

Lyude Paul wrote a very good intro to vblank here:
https://lore.kernel.org/dri-devel/faf63d8a9ed23c16af69762f59d0dca6b2bf085f.camel@redhat.com/T/#mce6480be738160e9d07c5d023e88fd78d7a06d27

Add this to the intro chapter in drm_vblank.c so others
can benefit from it too.

v2:
  - Reworded to improve readability (Thomas)

v3:
  - Added nice ascii drawing from Lyude (Lyude)
  - Added referende to high-precision timestamp (Daniel)
  - Improved grammar (Thomas)
  - Combined it all and made kernel-doc happy
  - Dropped any a-b, r-b do to the amount of changes

v4:
  - Add intro to vblank interrupt (Liviu)
  - Add historical reference for blanking (Alex)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Co-developed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-2-sam@ravnborg.org

drm/writeback: wire drm_writeback.h to kernel-doc

drm_writeback.h included a lot of nice kernel-doc comments.
Wire it up so the header file is included in the kernel-doc
generated documentation.

Added a few simple comments to the two structs so they
get picked up by kernel-doc.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-4-sam@ravnborg.org

drm: writeback: document callbacks

Document the callbacks:
    drm_connector_helper_funcs.prepare_writeback_job
    drm_connector_helper_funcs.cleanup_writeback_job

The documentation was pulled from the changelong introducing the
callbacks, originally written by Laurent.

Adding the missing documentation fixes the following warnings:
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'prepare_writeback_job' not described in 'drm_connector_helper_funcs'
drm_modeset_helper_vtables.h:1052: warning: Function parameter or member 'cleanup_writeback_job' not described in 'drm_connector_helper_funcs'

v2:
  - Fix formatting (Daniel)
  - Drop changelog text and add reference (Daniel)
  - Improve grammar. and use "operation" (Laurent)

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406194746.26433-3-sam@ravnborg.org

drm/dp_mst: Don't drop NAKs for down responses

It looks like that when we introduced the ability to handle multiple
down requests at once, we accidentally started dropping NAK replies -
causing sideband messages which got NAK'd to seemingly timeout and cause
all sorts of weirdness.

So, fix this by making sure we don't return from
drm_dp_mst_handle_down_rep() early, but instead treat NAKs like any
other message.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403200325.885628-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>

drm/dp_mst: Fix NULL deref in drm_dp_get_one_sb_msg()

While we don't need this function to store an mstb anywhere for UP
requests since we process them asynchronously, we do need to make sure
that we don't try to write to **mstb for UP requests otherwise we'll
cause a NULL pointer deref:

    RIP: 0010:drm_dp_get_one_sb_msg+0x4b/0x460 [drm_kms_helper]
    Call Trace:
     ? vprintk_emit+0x16a/0x230
     ? drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
     drm_dp_mst_hpd_irq+0x133/0x1010 [drm_kms_helper]
     ? __drm_dbg+0x87/0x90 [drm]
     ? intel_dp_hpd_pulse+0x24b/0x400 [i915]
     intel_dp_hpd_pulse+0x24b/0x400 [i915]
     i915_digport_work_func+0xd6/0x160 [i915]
     process_one_work+0x1a9/0x370
     worker_thread+0x4d/0x3a0
     kthread+0xf9/0x130
     ? process_one_work+0x370/0x370
     ? kthread_park+0x90/0x90
     ret_from_fork+0x35/0x40

So, fix this.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: fbc821c4a506 ("drm/mst: Support simultaneous down replies")
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Wayne Lin <waynelin@amd.com>
Cc: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200406193352.1245985-1-lyude@redhat.com
Reviewed-by: Sean Paul <sean@poorly.run>

drm/sun4i: tcon: Delete an error message in sun4i_tcon_init_irq()

The function “platform_get_irq” can log an error already.
Thus omit a redundant message for the exception handling in the
calling function.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/5a6cf5a7-3f27-5425-4d6a-550a17bc51e3@web.de

drm/bridge: fix kernel-doc warning in panel.c

Add missing documentation to fix following warning:
panel.c:303: warning: Function parameter or member 'bridge' not described in 'drm_panel_bridge_connector'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Boris Brezillon <boris.brezillon@collabora.com>
Cc: Mihail Atanassov <Mihail.Atanassov@arm.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-7-sam@ravnborg.org

drm/sched: fix kernel-doc in gpu_scheduler.h

Fix following warning:
gpu_scheduler.h:103: warning: Function parameter or member 'priority' not described in 'drm_sched_entity'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Nirmoy Das <nirmoy.das@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-4-sam@ravnborg.org

drm/dp_mst: Remove drm_dp_mst_topology_cbs.destroy_connector

Now that we've removed the last user of this callback, get rid of it and
drm_dp_destroy_connector().

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-5-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Stop printing extra messages in dm_dp_add_mst_connector()

You can already trace the creation and destruction of connectors using
DRM, and we definitely don't need to be printing info messages on
connector hotplugs as well. So, get rid of these.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-4-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Remove ->destroy_connector() callback

Pankaj Bharadiya started cleaning up the MST connector callbacks a while
ago, as I pointed out that they are the same across every driver and
don't serve much purpose. There was one callback that was left over
though from amdgpu, that we delayed removing due to not being completely
sure as to whether or not it was needed.

So, I've read through said callback and can confirm it's not at all
needed. Pretty much all of the work that is done in
dm_dp_destroy_mst_connector() can be done in
dm_dp_mst_connector_destroy(). Additionally, I've removed some bits that
didn't actually do anything:

* Removed DRM_INFO message we were printing, this shouldn't be info
  level and there's more appropriate drm debugging flags that should be
  used instead
* Removed amdgpu_dm_update_freesync_caps() - reading into this function,
  it doesn't actually do anything important and I'm not sure why it was
  ever being called here
* Stop clearing aconnector->dc_sink - this also doesn't do anything
* Stop clearing link settings in dc_link - this also doesn't do anything
* Also, use shorter variable

Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-3-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/amd/amdgpu_dm/mst: Remove unneeded edid assignment when destroying connectors

Doesn't do anything, noticed this while cleaning up some unrelated
stuff.

Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331205740.135525-2-lyude@redhat.com
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>

drm/panel-leadtek-ltk500hd1829: Fix dotclock

The currently listed dotclock disagrees with the currently
listed vrefresh rate. Change the dotclock to match the vrefresh.

Someone tell me which (if either) of the dotclock or vreresh is
correct?

Cc: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200302203452.17977-6-ville.syrjala@linux.intel.com
Tested-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>

drm: delete drm_pci.h

It's empty!

After more than 20 years of OS abstraction layer for pci devices, it's
kinda gone now.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403110610.2344842-2-daniel.vetter@ffwll.ch

drm/pci: Move drm_pci_alloc/free under CONFIG_DRM_LEGACY

All other users have been removed, yay!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[fix checkpatch warning]
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200403110610.2344842-1-daniel.vetter@ffwll.ch

drm/virtio: make virtio_gpu_object_attach void

It always returns zero.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-4-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: delete notify in virtio_gpu_object_create

For 3D buffers, virtio_gpu_gem_object_open notifies.
We can have the same behavior for dumb buffer.

v2: virtio_gpu_gem_object_open always notifies
v3: avoid boolean variable

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-3-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: delete notify after virtio_gpu_cmd_context_create

The first 3D ioctl will take care of notification.

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-2-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: random virtgpu_drv.h cleanups

- Static-ify virtio_gpu_gem_create
- Delete unused prototypes
- Point to current implementation files

Signed-off-by: Gurchetan Singh <gurchetansingh@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20200401223039.2860-1-gurchetansingh@chromium.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/hisilicon: Enforce 128-byte stride alignment to fix the hardware limitation

because the hardware limitation,The initial color depth must set to 32bpp
and must set the FB Offset of the display hardware to 128Byte alignment,
which is used to solve the display problem at 800x600 and 1440x900
resolution under 16bpp.

Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Gong junjie <gongjunjie2@huawei.com>
Acked-by: Xinliang Liu <xinliang.liu@linaro.org>
Signed-off-by: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1583466184-7060-4-git-send-email-tiantao6@hisilicon.com

drm/zte: Use simple encoder

The zte driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-23-tzimmermann@suse.de

drm/vkms: Use simple encoder

The vkms driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-21-tzimmermann@suse.de

drm/virtgpu: Use simple encoder

The virtgpu driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-20-tzimmermann@suse.de

drm/vc4: Use simple encoder

The vc4 driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-19-tzimmermann@suse.de

drm/tilcdc: Use simple encoder

The tilcdc driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-18-tzimmermann@suse.de

drm/tidss: Use simple encoder

The tidss driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Jyri Sarha <jsarha@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-17-tzimmermann@suse.de

drm/tegra: Use simple encoder

The tegra driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-16-tzimmermann@suse.de

drm/sun4i: Use simple encoder

The ingenic driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-15-tzimmermann@suse.de

drm/shmobile: Use simple encoder

The shmobile driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-14-tzimmermann@suse.de

drm/rockchip: Use simple encoder

The rockchip driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-13-tzimmermann@suse.de

drm/rcar-du: Use simple encoder

The rcar-du driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-12-tzimmermann@suse.de

drm/mediatek: Use simple encoder

The mediatek driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-11-tzimmermann@suse.de

drm/ingenic: Use simple encoder

The ingenic driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-10-tzimmermann@suse.de

drm/imx: Use simple encoder

The imx driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-9-tzimmermann@suse.de

drm/i2c/tda998x: Use simple encoder

The tda998x driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-8-tzimmermann@suse.de

drm/hisilicon/kirin: Use simple encoder

The kirin driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-7-tzimmermann@suse.de

drm/gma500: Use simple encoder

The gma500 driver uses empty implementations for some of its encoders.
Replace the code with the generic simple encoder. As a side effect, the
patch also removes an indirection in the encoder setup for Medfield.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-6-tzimmermann@suse.de

drm/fsl-dcu: Use simple encoder

The fsl-dcu driver uses an empty implementation for its encoder. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-5-tzimmermann@suse.de

drm/exynos: Use simple encoder

The exynos driver uses empty implementations for its encoders. Replace
the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-4-tzimmermann@suse.de

drm/atmel-hlcdc: Use simple encoder

The atmel-hlcdc driver uses an empty implementation for its encoder.
Replace the code with the generic simple encoder.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200305155950.2705-3-tzimmermann@suse.de

drm: Fix wrong kfree() in managed resource usage example

The example code showing how to use the managed resource API calls
kfree() on the wrong pointer. Fix it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200402095325.5266-1-laurent.pinchart+renesas@ideasonboard.com

drm/core: Calculate bpp in afbc helper

Some drivers (komeda, malidp) don't set anything in cpp. If that is the
case the right value can be inferred from the format. Then the "bpp" member
can be eliminated from struct drm_afbc_framebuffer.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331155308.6345-3-andrzej.p@collabora.com

drm/core: Use proper debugging macro

Use drm_dbg_kms() instead of DRM_DEBUG_KMS.

Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200331155308.6345-2-andrzej.p@collabora.com

drm/amdgpu: improve amdgpu_gem_info debugfs file

Note if a buffer was imported using peer2peer.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359296

drm/amdgpu: add support for exporting VRAM using DMA-buf v3

We should be able to do this now after checking all the prerequisites.

v2: fix entrie count in the sgt
v3: manually construct the sg

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359295

drm/amdgpu: add checks if DMA-buf P2P is supported

Check if we can do peer2peer on the PCIe bus.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359294

drm/amdgpu: note that we can handle peer2peer DMA-buf

Importing should work out of the box.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359293

drm/ttm: lock resv object during destruction

Calling ttm_bo_cleanup_memtype_use() destroys the TT object
which in turn could result in warnings without this.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359288

dma-buf: add peer2peer flag

Add a peer2peer flag noting that the importer can deal with device
resources which are not backed by pages.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/359286/

drm/dp_mst: make build_clear_payload_id_table return void

Nothing uses the always-0 return value.

Signed-off-by: Maya Rashish <coypu@sdf.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200321222959.GA1053@SDF.ORG

drm/qxl: Use correct notify port address when creating cursor ring

The command ring and cursor ring use different notify port addresses
definition: QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR. However, in
qxl_device_init() we use QXL_IO_NOTIFY_CMD to create both command ring
and cursor ring. This doesn't cause any problems now, because QEMU's
behaviors on QXL_IO_NOTIFY_CMD and QXL_IO_NOTIFY_CURSOR are the same.
However, QEMU's behavior may be change in future, so let's fix it.

P.S.: In the X.org QXL driver, the notify port address of cursor ring
      is correct.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: <stable@vger.kernel.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1585635488-17507-1-git-send-email-chenhc@lemote.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/mm: revert "Break long searches in fragmented address spaces"

This reverts commit 7be1b9b8e9d1e9ef0342d2e001f44eec4030aa4d.

The drm_mm is supposed to work in atomic context, so calling schedule()
or in this case cond_resched() is illegal.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/359278/

drm: add docs about the IN_FORMATS plane property

This is a standard property attached to planes in drm_universal_plane_init
when drm_mode_config.allow_fb_modifiers is true.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/mHOtz80Wa-x3A5Lz5ETTM65VUMfW1j6b-iCuvIy1RzOM1EloHPqAb2MnbU8ygZi0ABaLrxuN6pzu0v3QRn83125C0bXuHoo-DQWWEd80fdw=@emersion.fr

drm/managed: Fix off-by-one in warning

I'm thinking this is the warning that fired in the 0day report, but I
can't double-check yet since 0day didn't upload its source tree
anywhere I can check. And all the drivers I can easily test don't use
drm_dev_alloc anymore ...

Also if I'm correct supreme amounts of bad luck because usually kslap
(for bigger structures) gives us something quite a bit bigger than
what we asked for.

[0day uploaded tree, guess is correct]

Reported-by: kernel test robot <lkp@intel.com>
Fixes: c6603c740e0e ("drm: add managed resources tied to drm_device")
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Neil Armstrong <narmstrong@baylibre.com
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328162358.18500-1-daniel.vetter@ffwll.ch

drm/fb: fix kernel-doc in drm_framebuffer.h

Fix following warnings:
drm_framebuffer.h:342: warning: Function parameter or member 'block_width' not described in 'drm_afbc_framebuffer'
drm_framebuffer.h:342: warning: Function parameter or member 'block_height' not described in 'drm_afbc_framebuffer'

Trivial spelling mistakes.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Fixes: 55f7f72753ab ("drm/core: Add drm_afbc_framebuffer and a corresponding helper")
Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: James Qian Wang <james.qian.wang@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-3-sam@ravnborg.org

drm/dp_mst: add kernel-doc for drm_dp_mst_port.fec_capable

Fix kernel-doc warnings for drm_dp_mst_port.fec_capable.
This fixed the following warning:
drm_dp_mst_helper.h:162: warning: Function parameter or member
'fec_capable' not described in 'drm_dp_mst_port'

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: David Francis <David.Francis@amd.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
[Wrapped commit msg + s/network/topology]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328132025.19910-6-sam@ravnborg.org

drm: error out with EBUSY when device has existing master

As requested by Adam, provide different error message for when the
device has an existing master. An audit of the following projects, shows
that the errno is used only for printf() purposes.

xorg/xserver
xorg/drivers/xf86-video-ati
xorg/drivers/xf86-video-amdgpu
xorg/drivers/xf86-video-intel
xorg/drivers/xf86-video-tegra
xorg/drivers/xf86-video-freedreno
xorg/drivers/xf86-video-nouveau
xorg/drivers/xf86-video-vmwgfx

qt/kwin/plasma
gtk/mutter/gnomeshell
efl/enlightment

Cc: Adam Jackson <ajax@redhat.com>
Suggested-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319172930.230583-2-emil.l.velikov@gmail.com

drm: rework SET_MASTER and DROP_MASTER perm handling

This commit reworks the permission handling of the two ioctls. In
particular it enforced the CAP_SYS_ADMIN check only, if:
 - we're issuing the ioctl from process other than the one which opened
the node, and
 - we are, or were master in the past

This ensures that we:
 - do not regress the systemd-logind style of DRM_MASTER arbitrator
 - allow applications which do not use systemd-logind to drop their
master capabilities (and regain them at later point) ... w/o running as
root.

See the comment above drm_master_check_perm() for more details.

v1:
 - Tweak wording, fixup all checks, add igt test

v2:
 - Add a few more comments, grammar nitpicks.

Cc: Adam Jackson <ajax@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Testcase: igt/core_setmaster/master-drop-set-user
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Adam Jackson <ajax@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319172930.230583-1-emil.l.velikov@gmail.com

drm/radeon: convert to use i2c_new_client_device()

Move away from the deprecated API.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-7-wsa+renesas@sang-engineering.com

drm/nouveau/therm: convert to use i2c_new_client_device()

Move away from the deprecated API and return the shiny new ERRPTR where
useful.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-6-wsa+renesas@sang-engineering.com

drm/i2c/tda998x: convert to use i2c_new_client_device()

Move away from the deprecated API and return the shiny new ERRPTR where
useful.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-5-wsa+renesas@sang-engineering.com

drm/i2c/sil164: convert to use i2c_new_client_device()

Move away from the deprecated API and return the shiny new ERRPTR where
useful.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-4-wsa+renesas@sang-engineering.com

drm/gma500: convert to use i2c_new_client_device()

Move away from the deprecated API and return the shiny new ERRPTR where
useful.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-3-wsa+renesas@sang-engineering.com

drm/amdgpu: convert to use i2c_new_client_device()

Move away from the deprecated API.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326211005.13301-2-wsa+renesas@sang-engineering.com

dt-bindings: display: add visionox rm69299 panel variant

Add bindings for visionox rm69299 panel.

Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed indent]
Link: https://patchwork.freedesktop.org/patch/msgid/20200327073636.13823-2-harigovi@codeaurora.org

dt-bindings: display: xpp055c272: Remove the reg property

Commit 52120e8c7ae3 ("dt-bindings: display: fix panel warnings") removed
the dsi unit name, but missed to remove the 'reg' property, which causes
the following 'make dt_binding_check' warning:

Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.example.dts:17.5-29.11: Warning (unit_address_vs_reg): /example-0/dsi: node has a reg or ranges property, but no unit name

Fix it by removing the unneeded 'reg' property.

Fixes: 52120e8c7ae3 ("dt-bindings: display: fix panel warnings")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328183641.11226-2-festevam@gmail.com

dt-bindings: display: ltk500hd1829: Remove the reg property

Commit 52120e8c7ae3 ("dt-bindings: display: fix panel warnings") removed
the dsi unit name, but missed to remove the 'reg' property, which causes
the following 'make dt_binding_check' warning:

Documentation/devicetree/bindings/display/panel/leadtek,ltk500hd1829.example.dts:17.5-29.11: Warning (unit_address_vs_reg): /example-0/dsi: node has a reg or ranges property, but no unit name

Fix it by removing the unneeded 'reg' property.

Fixes: 52120e8c7ae3 ("dt-bindings: display: fix panel warnings")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200328183641.11226-1-festevam@gmail.com

drm: panel: Add Starry KR070PE2T

The KR070PE2T is a 7" panel with a resolution of 800x480.

KR070PE2T is the marking present on the ribbon cable. As this panel is
probably available under different brands, this marking will catch
most devices.

As I can't find a datasheet for this panel, the bus_flags are instead
from trial-and-error. The flags seem to be common for these kind of
panels as well.

Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320112205.7100-3-dev@pascalroeleven.nl

dt-bindings: panel: Add binding for Starry KR070PE2T

Add the devicetree binding for Starry KR070PE2T

Signed-off-by: Pascal Roeleven <dev@pascalroeleven.nl>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200320112205.7100-2-dev@pascalroeleven.nl

drm/lima: Add optional devfreq and cooling device support

Most platforms with a Mali-400 or Mali-450 GPU also have support for
changing the GPU clock frequency. Add devfreq support so the GPU clock
rate is updated based on the actual GPU usage when the
"operating-points-v2" property is present in the board.dts.

The actual devfreq code is taken from panfrost_devfreq.c and modified so
it matches what the lima hardware needs:
- a call to dev_pm_opp_set_clkname() during initialization because there
  are two clocks on Mali-4x0 IPs. "core" is the one that actually clocks
  the GPU so we need to control it using devfreq.
- locking when reading or writing the devfreq statistics because (unlike
  than panfrost) we have multiple PP and GP IRQs which may finish jobs
  concurrently.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200319203427.2259891-3-martin.blumenstingl@googlemail.com

drm/dp_mst: Remove single tx msg restriction.

Now that we can support multiple simultaneous replies, remove the
restrictions placed on sending new tx msgs.

This patch essentially just reverts commit
  5a64967a2f3b ("drm/dp_mst: Have DP_Tx send one msg at a time")
now that the problem is solved in a different way.

Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <waynelin@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213211523.156998-4-sean@poorly.run

drm/mst: Support simultaneous down replies

Currently we have one down reply message servicing the mst manager, so
we need to serialize all tx msgs to ensure we only have one message in
flight at a time. For obvious reasons this is suboptimal (but less
suboptimal than the free-for-all we had before serialization).

This patch removes the single down_rep_recv message from manager and
adds 2 replies in the branch structure. The 2 replies mirrors the tx_slots
which we use to rate-limit outgoing messages and correspond to seqno in
the packet headers.

Cc: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <waynelin@amd.com>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213211523.156998-3-sean@poorly.run

drm/mst: Separate sideband packet header parsing from message building

In preparation of per-branch device down message handling, separate
header parsing from message building. This will allow us to peek at
figure out which branch device the message is from before starting to
parse the message contents.

Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Wayne Lin <waynelin@amd.com>
[seanpaul s/drm_dp_sideband_msg_build/drm_dp_sideband_msg_set_header/]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200213211523.156998-2-sean@poorly.run

drm/fb-helper: Add TODO for making drm_fb_helper_alloc_fbi fill apertures

Currently drivers using drm_fbdev_generic_setup() end up with a single
empty aperture in their fb_info struct.

Not having the proper info in the apertures list causes
register_framebuffer to not remove conflicting framebuffers,
which some drivers currently workaround by manually calling
drm_fb_helper_remove_conflicting_pci_framebuffers().

Add a TODO as a reminder that we need to fix this.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20200326151009.102377-1-hdegoede@redhat.com

drm/bridge: sii9234: silence warning about regulators during deferred probe

Don't confuse user with meaningless warning about failure in getting
regulators in case of deferred probe.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200226101307.16708-1-m.szyprowski@samsung.com