Jaehoon Chung [Sun, 10 May 2020 22:36:40 +0000 (07:36 +0900)]
board: w400: add dfu functions to set dfu's information
Add dfu function to set dfu's information.
It's Tizen specific functions.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:36:35 +0000 (07:36 +0900)]
configs: odroid-n2: enable configs relevant to video
Enable configs relevant to video.
Change-Id: Ib5a7c75c74d6cd644b0dab50b3f80e9d64237cc9
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:36:32 +0000 (07:36 +0900)]
[WIP] meson: board-g12a: add COFNIG_TIZEN about reserved memory
Add CONFIG_TIZEN about reserved-memory for secure monitor.
- This is for using only Hardkernel's kernel.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:35:48 +0000 (07:35 +0900)]
samsung: tizen_amlogic: add CONFIG_SYS_MEM_TOP_HIDE
Add CONFIG_SYS_MEM_TOP_HIDE as 0x08000000.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:35:44 +0000 (07:35 +0900)]
board: amlogic: tizen-board-odroid-n2: add earlycon into bootargs
Add earlycon into bootargs.
N2 - aml-uart,0xff803000
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:35:40 +0000 (07:35 +0900)]
samsung: tizen_amlogic: change SYS_PROMPT value
Change SYS_PROMPT value from "=>" to "Odroid N2>".
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:35:19 +0000 (07:35 +0900)]
board: amlogic: tizen-boot-odorid-n2: update kernel address
Update kernel address.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:35:15 +0000 (07:35 +0900)]
configs: tizen_amlogic: add tizen specific haeder for amlogic
Add Tizen specific header for amlogic.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:34:55 +0000 (07:34 +0900)]
amlogic: w400: add tizen-boot odroid-n2 script
Add tizen-boot-odroid-n2 boot script.
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 10 May 2020 22:34:24 +0000 (07:34 +0900)]
fip: add Amlogic prebuilt firmware files for Odroid-N2
Add amlogic prebilt firmware files for Odroind-N2.
It needs to make u-boot.bin.
Change-Id: I39b3b1145f4f9006632e97702db4e56cea651952
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 29 Oct 2020 11:41:20 +0000 (20:41 +0900)]
fip: set all file in fip dir as binary
Change-Id: I44175d8d7f778f59649abb7d2310ace1346bf8b5
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Wed, 21 Oct 2020 10:07:20 +0000 (19:07 +0900)]
configs: rpi_4_32b: enable UMS config
Enable UMS configuration to use mass storage.
Change-Id: Ic7dc117e21e025776f7d4711ca63457b3148d166
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 21 Oct 2020 02:45:12 +0000 (11:45 +0900)]
packaging: update version info from 2019.10 to 2020.10
Update version info from 2019.10 to 2020.10.
Change-Id: I84d1ed4cd3842e9a5baec04d46e5b07dbda4b584
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 20 Oct 2020 04:36:16 +0000 (13:36 +0900)]
configs: rpi4: enable IP_DEFRAG configuration
Enable IP_DEFRAG configuration in defconfig file.
And Remove its config from tizen_rpi header.
Change-Id: Ie622b593639f9838773bff85e664aaf4d660d6dd
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Sylwester Nawrocki [Wed, 7 Oct 2020 17:39:20 +0000 (19:39 +0200)]
cmd: Remove unreachable code from netboot_nfs()
rcode is always 0 (CMD_RET_SUCCESS) so last bootstage_error() call is never
executed. Remove it altogether with the rcode local variable.
This supresses following SVACE warning:
* UNREACHABLE_CODE: This statement in the source code might be unreachable during program execution.
[unreachable] unreachable at cmd/net.c:312
[rcode != 0 is always false because at this program point the variable rcode is always equal to 0]
rcode != 0 is always false because at this program point the variable rcode is always equal to 0
at cmd/net.c:309
Change-Id: Idf4759839897a35fb47870bf953d35bcb5f0cad8
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Jaehoon Chung [Wed, 5 Aug 2020 03:53:39 +0000 (12:53 +0900)]
packaging: u-boot-rpi3: remove unnecessary files
Remove unnecessary files. It was used to boot with optee.
But it doesn't use anymore because trust-firmware doesn't support.
Change-Id: I115ba5e6099b624a2113b8cdf1934699f31b6757
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 23 Jun 2020 10:04:56 +0000 (19:04 +0900)]
scripts: tizen: sd_fusing_rpi3: change partition size
Change partition size to use 64bit image.
- ramdisk-recovery : 12MB -> 32MB
- system-data : 512MB -> 1.3GB
- modules : 20MB -> 32MB
- reserved1 : 64MB
- reserved2 : 128MB
Change-Id: I6bb1cca052af91e0e66f6148b76055c60670aead
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 22 Jun 2020 02:24:36 +0000 (11:24 +0900)]
samsung: tizen_rpi: remove unnecessary variable and comment
Remove unnecesarry environment variable.
ramdisksize and tizen_kernel_addr_r are set to correct value in boot
script.
Because comment was not valid, it doesn't need to keep.
Change-Id: Ica280a521ba538340b9dfbe640e6a5fd9839ab85
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 22 Jun 2020 02:18:03 +0000 (11:18 +0900)]
rpi: tizen-boot-rpi3: calculate tizen_kernel_addr_r with ramdisk's size
Calculate tizen_kernel_addr_r with ramdisk's size.
When ramdisk size is increased, kernel loading offset will be also
increased. It can prevent to overwrite the images.
Change-Id: Ibbec03b4e3380028841d10eee7157c5e86fa8756
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 19 Jun 2020 03:56:33 +0000 (12:56 +0900)]
rpi: tizen-boot-rpi4: calculate tizen_kernel_addr_r with ramdisk's size
Calculate tizen_kernel_addr_r with ramdisk's size.
When ramdisk size is increased, kernel loading offset will be also
increased. It can prevent to overwrite the images.
Change-Id: Icc900b726f46683e5104be7f8ab31f36934f12b5
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 18 Jun 2020 04:04:18 +0000 (13:04 +0900)]
rpi: tizen-boot-rpi3: fix hard-coding value about ramdisksize
Current ramdisksize is set to hard-condig value as 0xc00000 or 0x800000.
If ramdisk's size is changed to other, it also needs to change.
But we're getting the number of block about ramdisk partition.
Use its value to load a ramdisk image. Then it's more clear than now.
Change-Id: I59e4ed5d1c49e82c2bd76474b1d4bc086fb600e1
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 17 Jun 2020 11:44:37 +0000 (20:44 +0900)]
rpi: tizen-boot-rpi4: fix hard-coding value about ramdisksize
Current ramdisksize is set to hard-condig value as 0xc00000 or 0x800000.
If ramdisk's size is changed to other, it also needs to change.
But we're getting the number of block about ramdisk partition.
Use its value to load a ramdisk image. Then it's more clear than now.
Change-Id: I450ace4f0e795f0a05f5ff36fcd837349bc5a4aa
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 9 Jun 2020 23:32:56 +0000 (08:32 +0900)]
configs: rpi_4_defconfig: enable ums configuration
Enable ums configuration.
And CONFIG_ARCH_FIXUP_FDT_MEMORY was enabled by default.
Change-Id: I4eaebba7b3fd05bc01d125b159289056162d203a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Mon, 8 Jun 2020 08:01:16 +0000 (10:01 +0200)]
tizen: sd_fusing_rpi3.sh: Support for non-sdX partition names
Properly find partiton device names for the given block device. In
case of MMC (or loop) partition names are created in a different way
(/dev/mmcblk0p1) than for typical USB pen-drives (/dev/sdb1).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I4e3e272acd85bcd5a54ff8102a3978d18ea5687e
Seung-Woo Kim [Fri, 5 Jun 2020 07:46:03 +0000 (16:46 +0900)]
packaging: rpi4: add rpi4 64-bit spec file
Add rpi4 64-bit spec file.
Change-Id: I569df01d93a1d08de28f56f1ccbaf4a1600d79c0
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 5 Jun 2020 07:42:28 +0000 (16:42 +0900)]
rpi: tizen-boot: rpi: tizen-boot: add tizen boot script for rpi4 64bit
Add tizen boot script for rpi4 64bit.
Change-Id: I5ea641bccfa38dbabf666a783c2c3446daad4992
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 5 Jun 2020 07:40:52 +0000 (16:40 +0900)]
rpi: tizen-boot: rpi3: fix wrong setenv usage
The setenv does not require '='. Fix wrong setenv usage.
Change-Id: Idf1bf41655fa80837784fabc441dd2e47ac487a9
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Marek Szyprowski [Mon, 20 Apr 2020 13:08:30 +0000 (15:08 +0200)]
tizen: replace NFSdown with generic Tizen Download utility (NFS and USB)
Tizen Download utility provides replacement for nfsdown and usbdown
commands, implemented on top of the generic u-boot's DFU framework.
It allows to flash any entity defined in dfu_alt_info, not only the ones
hardcoded in the mentioned commands.
This is useful for flashing only the selected images/entities.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ic4275302442b84dc96a2d7d31188eb3d7143e7ec
Marek Szyprowski [Mon, 27 Apr 2020 06:45:02 +0000 (08:45 +0200)]
cmd: add generic Tizen Download (NFS & USB) command
This is a quick replacement of the NFSdown and USBdown commands, rewritten
on top of the generic DFU framework. This removes a few limitation of both
obsoleted commands.
Change-Id: Id8a311eabd2bab7d90aeee6adabbd6461897b4e3
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
[sw0312.kim: remove newline from command name]
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 22 May 2020 07:52:18 +0000 (16:52 +0900)]
scripts: tizen: update script version to distinguish
Update script minor version to distinguish.
(from 1.3 to 1.3.1)
- 1.3.1 : Enhance write performcne
Change-Id: If9bbc1cbca22d87bc837d03e60d09a3a0e6c6883
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Fri, 15 May 2020 10:08:54 +0000 (12:08 +0200)]
net: fix build without NFS or NFS download enabled
Partial NFS download requires setting net_boot_file_{offset,size_limit}
global variables, which are available only when CONFIG_CMD_NFS is set.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I74e2dbb56c2b41078d2e5506bdcba6458299d792
Junghoon Kim [Thu, 21 May 2020 03:56:23 +0000 (12:56 +0900)]
scripts: sd_fusing: Increase the block size upon the image flashing
Fine-grained IO degrades the image flashing performance due to the IO
stack overhead. Increase the block size upon the dd operation to improve
the flashing performance.
Change-Id: I937ca401d07045f055d3f55ca9f52a3261ee4fb4
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Seung-Woo Kim [Thu, 14 May 2020 08:19:36 +0000 (17:19 +0900)]
scripts: tizen: sd_fusing_rpi3: Check dd version for backward compatibility
Before dd version 8.24, "status=progress" option is not supported.
For backward compatibility, check dd version and use the option
only when it is possible.
Change-Id: Ia90668e9cd22bf2906b4b0ecd574bb45ad14fd95
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Junghoon Kim [Thu, 14 May 2020 05:51:00 +0000 (14:51 +0900)]
scripts: tizen: Improve the image flashing performance for RPI family
The current dd of the pv combination degrades the performance due to the
pipe overhead and is also bad to see due to the duplicate output.
It can be resolved by the use of direct mode with progress status. This
reduces the flashing time of platform images by 17.5% in my environment.
Change-Id: I986ce72e0294b6f143ca95419364a0f89f289d74
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Seung-Woo Kim [Sat, 25 Apr 2020 06:05:34 +0000 (15:05 +0900)]
cmd: thordown: Fix to show stopped message when interrupted
The thordown command can be interrupted by Ctrl-C, and it can be
identified with error value. Fix to show stopped message when
interrupted.
Change-Id: Idfe1a9dc1e168ea20c94d49ada497dc1b66bde52
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Fri, 24 Apr 2020 07:40:40 +0000 (16:40 +0900)]
gadget: f_thor: Return proper error value for thor_init()
After the commit
17679aed622b ("usb: thor: add screen support"),
caller of thor_init() expects general error value to check
interrupt by Ctrl-C but thor_init() returns wrong error value -1
for Ctrl-C termination during rx or wrong protocol response.
Return proper error for the cases.
Change-Id: I8a637918930673bad953a88e26c79b8e64580bc8
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Junghoon Kim [Tue, 21 Apr 2020 07:59:05 +0000 (16:59 +0900)]
Fix the use of resize2fs
The resize2fs can be used to enlarge or shrink the ext family filesystem
only. Thus, An error occurs when trying to use it with other filesystems
such as vfat. Fix the use of resize2fs for use only with the ext family
filesystem.
Change-Id: I2c9b7c686086d924b003d07a2762bb668dd39ac8
Signed-off-by: Junghoon Kim <jhoon20.kim@samsung.com>
Marek Szyprowski [Fri, 17 Apr 2020 10:43:45 +0000 (12:43 +0200)]
tizen: rpi2/3/4: fix typo in Tizen boot scripts
/s/comdline/cmdline
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I2464583207200762d981f0d133dacb14ec66a445
Seung-Woo Kim [Fri, 3 Apr 2020 07:58:36 +0000 (16:58 +0900)]
scripts: tizen: sd_fusing: Check requested device
It is possible to request flashing a device which is non-existent
or unaccessible. Especially, request can flash non-removable
storage disk that user do not really intend. To skip all the case,
Check requested device.
For non removable disk, it will ask user really intended to flash
the device.
Change-Id: I7ee3363fe4075abd7b860acf26b6cbe65e6fa68c
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Marek Szyprowski [Wed, 25 Mar 2020 09:01:48 +0000 (10:01 +0100)]
net: bcmgenet: move PHY initialization from probe() to start()
Fix random network failures on subsequent network access by forcing PHY initialization on
every network access. This also fixes sudden link drop from 100baseT to 10baseT observed
from time to time.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I5bb55ce6546dec5449afea1bef036458563f287c
Marek Szyprowski [Wed, 25 Mar 2020 09:03:40 +0000 (10:03 +0100)]
net: nfs: show file offset and improve progress display
Always align progress display to the start of the column and show downloaded
file offset.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: Ia5e3185110e0dbfc89046854f8d612f6428af794
Marek Szyprowski [Wed, 25 Mar 2020 09:08:16 +0000 (10:08 +0100)]
net: ping: reset stored IP once the command finishes to avoid interrupting other protocols
Reset stored ping IP address before leaving the netloop to ensure that the subsequent calls
to the netloop, especially for the other protocols, won't be interrupted by the received
ICMP_ECHO_REPLY packet.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I0d90b3a6e9481c8e8237874eff8a9a12df4190e0
Marek Szyprowski [Tue, 17 Mar 2020 13:03:10 +0000 (14:03 +0100)]
net: nfs: add support for partial downloads from given offset
Add support for downloading file from the given offset (in bytes) and limit the size up to given
bytes.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I9f442d375d6b37986cb7c10f93c11d265886cceb
Marek Szyprowski [Tue, 17 Mar 2020 13:50:08 +0000 (14:50 +0100)]
net: nfs: reduce the number of printed hashes during data transfer
Downloading large images (about 1GiB) prints a lots of hash characters, so it is hard to follow
what is happenings. Reduce the amount of printed progress marks by a magnitude.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I142d1c646b2232eb505301a88b1ff051ac2bc19c
Marek Szyprowski [Thu, 12 Mar 2020 13:04:56 +0000 (14:04 +0100)]
rpi3/4: enable NFS download feature
Sync RPi3/4 defconfigs and enable NFS download feature for all configs.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I35ade633d89bbd18374270362ba831d35c9a0d49
Marek Szyprowski [Thu, 13 Feb 2020 08:50:54 +0000 (09:50 +0100)]
config: rpi: Increase malloc buffer size
GENET ethernet driver and THORdown consume more memory than the default
4M, so increase the malloc buffer size to 16M to let them work together.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I1c4d386761699fcb72b1a76d90d50518554a2980
Jaehoon Chung [Mon, 20 Jan 2020 21:55:14 +0000 (06:55 +0900)]
samsung: tizen_rpi: add dfu setup informations
Add dfu setup informations.
- usb controller index : 0
- dfu interface : mmc(eMMC/SD)
- default dfu device : 0
After applied this patch, it will be worked with "thor" instead of "thor 0 mmc 0".
Change-Id: I32294af8531532ea86333853fb208c2c23deb33d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 20 Jan 2020 09:47:35 +0000 (18:47 +0900)]
mmc: sdhci: add quriks relevant to broken SDMA
ADd quirks relevant to broken SDMA.
If set to SDHCI_QUIRK_BROKEN_SDMA, it should be run the pio mode.
Change-Id: Iddae84fea4d1de0301b9afd45f9f55d7d3f8de74
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 19 Dec 2019 04:25:19 +0000 (13:25 +0900)]
configs: rpi_4_32b_defconfig: enable btrfs config
Enable btrfs configuration to support BTRFS on u-boot.
Change-Id: I883ab759f48724bb6bac6804d95f58a2b07b1ab5
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 19 Dec 2019 00:53:45 +0000 (09:53 +0900)]
configs: rpi_4_32b_defconfig: enable UMS configuration
Enable UMS configuration.
It can be used to usb-mass storage.
Usage: U-Boot> ums 0 mmc 0
- Then you can see block device node on your local host.
It's useful to flash or format for using Tizen.
Change-Id: Ic3a27a69a03d05691f60e764990d33d8bfef2275
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 19 Dec 2019 00:44:18 +0000 (09:44 +0900)]
samsung: tizen_rpi: fix typo about boot.scr.uimg
Fix typo about boot.scr.uimg.
- s/boot.src.uimg/boot.scr.uimg
Change-Id: I656f8f856cc918ca0239e12a709662269f6c10c9
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 16 Dec 2019 10:30:31 +0000 (19:30 +0900)]
configs: tizen_rpi: add bcm2711-rpi-4-b.dtb in dfu information
Add bcm2711-rpi-4-b.dtb in dfu information.
It's used when thor command is run.
Change-Id: I55c0397647457af94301007763b5732a28d20d42
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Matthias Brugger [Thu, 5 Dec 2019 17:53:15 +0000 (18:53 +0100)]
ARM: defconfig: Fix 32bit config for RPi4
The rpi_4_32b_defconfig states that only one DRAM bank is present. This
leads to a wrong configuration of the available DRAM. Fix this by
setting the DRAM bank config accordingly.
Fixes:
193279d784 ("RPI: Add defconfigs for rpi4 (32/64)")
Change-Id: I067ba66d80f636d6a56dfb7a14e3ee8da78829d4
Signed-off-by: Matthias Brugger <mbrugger@suse.com>
Jaehoon Chung [Thu, 5 Dec 2019 00:28:35 +0000 (09:28 +0900)]
include: samsung: tizen_rpi: separate vc_mem base/size value
Separate vc_mem base/size value according to target.
RPI4 and RPI3 have different value about vc_mem base and size.
This value has been taken from raspbian kernel image.
Change-Id: I95274e2acab9e3ef6af90759d2141428b82f86a8
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 28 Nov 2019 04:02:17 +0000 (13:02 +0900)]
scripts: tizen: sd_fusing: increase minor version information
Increase minor version information from 1.0. to 1.1.
Change-Id: I15612f6ecb73d77c58e5690e542d8e51af41257a
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Fri, 15 Nov 2019 10:46:40 +0000 (19:46 +0900)]
scripts: tizen: sd_fusing_rpi3: Fix start position of extended partitions
Older version sfdisk than 2.26 does not align the start and end
of partitions to block, and it breaks the size of paritions less
than requested. Fix start position of extended partitions by
calculation to guarantee the requested size.
Change-Id: I6d5bae06e4cd871075259d406d349c4ac63fab40
Ref: http://man7.org/linux/man-pages/man8/sfdisk.8.html
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Sun, 17 Nov 2019 23:52:42 +0000 (08:52 +0900)]
samsung: tizen_rpi: change rebootparam address
Change rebootparam address from 0x02700000 to 0x02100000.
0x02700000 is used as ramdisk_addr_r.
Change-Id: Iee69f582b44cbcf7cbcd9c29c5b2bd0efbaf349c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 12 Nov 2019 05:35:18 +0000 (14:35 +0900)]
rpi: tizen-boot: rpi4-32b; sync boot script with rpi3-32b
Sync boot script with rpi3-32b.
It's fixed wrong statement and condition check.
Change-Id: I3179f1fa9909443bbe8b1711232396f042228877
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Dongwoo Lee [Fri, 3 May 2019 06:08:01 +0000 (15:08 +0900)]
rpi: tizen-boot: rpi3-32b: Enable custom network configuration
To apply custom network configuration, this patch adds ip_opt to
bootcmd.
Fixes:
653d68709c27 ("rpi: tizen-boot: rpi3-32b: pass network arguments on flash mode")
Change-Id: I42d113f2c1591d62602128bc2e75a464d7cefebc
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Seung-Woo Kim [Mon, 29 Apr 2019 06:25:36 +0000 (15:25 +0900)]
rpi: tizen-boot: rpi3-32b: support to enter the flash mode with command
Support to enter the flash mode with command.
- Refer to below command:
U-boot> run tfm
Note: this applies, to rpi3-32b from rpi3, the commit
cf212f48a110
("config: tizen_rpi: support to enter the flash mode with command").
Change-Id: I3a801aed172557385abd8651c811708f1f27feec
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 29 Apr 2019 06:23:27 +0000 (15:23 +0900)]
rpi: tizen-boot: rpi3-32b: pass network arguments on flash mode
To setup network environment for flash manager, this patch makes
passing parameters such as 'ipaddr', 'netmask', and 'gateway' through
kernel bootcmd. Those parameters can be assigned by user-self before
using flash mode.
Note: this is applying below patches from rpi3 to rpi3-32b:
f6f75b5bb37d ("rpi: tizen-boot: rpi3: pass network arguments on flash mode")
e2e0f18b9f3e ("rpi: tizen-boot: rpi3: remove dhcp as default network configuration")
Change-Id: I8de2c8f26f0a5c276ac32e46a83d8fc71eb1e7fd
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 29 Apr 2019 06:16:53 +0000 (15:16 +0900)]
rpi: tizen-boot: rpi3-32b: fix to use setenv for bootmode
Fix to use setenv for bootmode instead of assignment for remaining
part from the commit
5c008029d782 ("config: tizen_rpi: move env
values from boot script to tizen_rpi.h").
Change-Id: I2ae5d58706bc1e5a8c39ee2952bf3ca2355054ec
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 11 Nov 2019 02:36:50 +0000 (11:36 +0900)]
configs: rpi: remove lcd from console output
From RPI3, log printing to lcd video console causes slow down of
uart rx getc called and fifo overrun occured from uart rx because
rpi3 mini uart has small h/w fifo. Remove lcd from console output.
It's changed from lcd to videoconsole.
Change-Id: I1d96ceab2ee796b4757032400c659fe40ab2f08d
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 7 Nov 2019 06:32:05 +0000 (15:32 +0900)]
packaging: rpi4-32: add rpi4 32bit spec file
Add rpi4 32bit spec file.
Change-Id: I5e2b18275d0e92ec2294f19cd0f56dffe412691d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 4 Nov 2019 11:50:44 +0000 (20:50 +0900)]
mmc: dw_mmc: increase timeout value in data_transfer function
Increase timeout value in data_transfer function.
1000 value is too short to transfer data.
When it's set to 1000, it's occurred "mmc write failed" during thor
download.
In future, it needs to fix correct value.
Change-Id: I3e18eb1480fbdb33c0f8732ce271d1445568379f
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 10 Oct 2019 08:23:57 +0000 (17:23 +0900)]
packaging: rpi3-32b: fix wrong build arguments
It's changed from env to envtools.
And enviroment's value is built-in.
(RPI3 is using uboot.env, not params.bin.)
Change-Id: Ib2f0839627f182086fcef540cdd3e370de2a3e82
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 10 Oct 2019 05:14:52 +0000 (14:14 +0900)]
packaging: update version to 2019.10 and BuildRequires
Update version to 2019.10 for using u-boot v2019.10.
And Latest u-boot is required upper version than gcc 6.0.
If using lower versioni than 6.0, it will be failed to build.
Change-Id: Id7587a1bab5997e8d0a9869c8bfe3b7af2930934
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 27 Sep 2019 10:14:21 +0000 (19:14 +0900)]
samsung: tizen_rpi: fix dfu information to use THOR
Fix dfu information to use THOR.
Change-Id: I9564871a46f02a2042c68f93476c3b9582a6744e
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 27 Sep 2019 10:13:24 +0000 (19:13 +0900)]
rpi: add dfu functions to use thor
Add dfu functions to use thor.
Change-Id: Ia59960dc05c3680ccef5b6fdc9108bb0be249fb4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 23 Sep 2019 06:54:39 +0000 (15:54 +0900)]
samsung: tizen_rpi: remove CONFIG_DFU_ALT_INFO
Remove CONFIG_DFU_ALT_INFO for fixing build error.
It will be redefined in future.
Change-Id: I74fa2c6a92ebaee3de4f47edc71c23ddc0269e63
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Marek Szyprowski [Mon, 16 Sep 2019 11:31:06 +0000 (13:31 +0200)]
config: enable THOR download support on Raspberry Pi4 boards
Change-Id: Icd9091c5670653a551d05aaabf6cc5f1bf0243f6
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 16 Sep 2019 11:33:02 +0000 (20:33 +0900)]
samsung: tizen_rpi: fix wrong bootargs parameter
It needs to add whitespace between vc_mem size and vc_mem base.
Change-Id: Iecc5885427d0678da4960f6f40e5368fd92a286d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 16 Sep 2019 02:06:59 +0000 (11:06 +0900)]
board: rpi: add tizen boot script for rpi4
Add tizen boot script for rpi4 32bit.
Change-Id: Ib497cebb6dc3ef62ecd7164c886cd3e41f5e848c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 10 Sep 2019 10:11:13 +0000 (19:11 +0900)]
samsung: tizen_rpi: change kernel and bootparam loading address
Change kernel and bootparam loading address.
ramdisk/script/fdt address are changed at latest mainline.
So tizen kernel loading address also needs to change.
As comment, rebootparam address is ramdisk_addr_r.
But 0x3a62b000 is not ramdisk_addr_r.
Fixed to rebootparam_addr as correct ramdisk_addr_r.
Change-Id: I5fc5aadbc5ffe94e7917eb5e41370937ea48850b
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 8 Jul 2019 23:43:56 +0000 (08:43 +0900)]
packaging: rpi3: separate rpi3 spec file for 32bit
Separate rpi3 spec file for 32bit.
QB system can't parse the macro like %ifarch and %define.
This patch is for building aarch64 architecture on QB system.
Change-Id: Ia81bd81bf439feea2baf2de7dfeed8840a7ff683
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 24 Jun 2019 02:03:52 +0000 (11:03 +0900)]
samsung: tizen_rpi: change loglevel from 7 to 4
Change logelvel from 7 to 4.
If someone want to see full log, change loglevel on u-boot console.
Refer to below command on u-boot
- edit opts
After changing loglevel, enter "saveenv" command.
Change-Id: I9044e70d1f064922e7a9f255ef2db63e158864fb
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 17 May 2019 01:08:39 +0000 (10:08 +0900)]
scripts: tizen: update script version information
Update script version information to check latest version.
It's helpful to debug script problem.
Change-Id: I4cfc5293cbbf8a3d75b516b547d71cb02c5fa089
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Dongwoo Lee [Mon, 13 May 2019 07:33:18 +0000 (16:33 +0900)]
serial: bcm283x_mu: Refactor RX buffer
This patch changes maximum count of reading rx fifo by following
emprical test, and applies circular queue to buffer.
Change-Id: Id498ea9c0c22014f00af2b45ad64ad4c6e69a021
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Dongwoo Lee [Wed, 8 May 2019 12:03:47 +0000 (21:03 +0900)]
serial: bcm283x_mu: Support RX buffer
Since mini uart has very small rx fifo, writing long string can
cause overrun. To prevent this, this patch appiles buffer for rx
process.
Change-Id: Ic5bd37875567fe51eb5491b8867f39c1a78de6b9
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Thu, 14 Mar 2019 08:14:27 +0000 (17:14 +0900)]
configs: rpi: enable MMC_BCM2835 configuration
Enable MMC_BCM2835 configuration.
Change-Id: Ic5cd05df99fc86157efd686ec6f5f69fd090ec72
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Sun, 3 Mar 2019 23:30:09 +0000 (08:30 +0900)]
config: samsung: tizen_rpi: remove redefined configuratins
Remove redefined configurations.
It was already defined in rpi header.
Change-Id: I3a5fc90b5f8176ab723dfce53a9c67e0cceab18b
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 26 Feb 2019 06:45:25 +0000 (15:45 +0900)]
rpi: tizen-boot: rpi3: remove unnecessary comment
Remove unnecessary comment.
Change-Id: I8eebe6b7e24101556ee444d0cebc75edb0d8e454
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 05:01:16 +0000 (14:01 +0900)]
config: tizen_rpi: move some bootarg values to tizen_rpi header
Some bootargs values can be located to tizen_rpi header.
Because it's used same value in script of rpi3 and rpi3 32b.
Change-Id: I73d2d473d624f2ffa37f1fe0ed959ff098bb9247
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 22 Feb 2019 08:08:23 +0000 (17:08 +0900)]
config: tizen_rpi: support to enter the flash mode with command
Support to enter the flash mode with command.
- Refer to below command:
U-boot> run tfm
Change-Id: Ie5835573cdefb3ccfe3b67d3d20a4e301672251c
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Fri, 22 Feb 2019 05:57:54 +0000 (14:57 +0900)]
config: tizen_rpi: move env values from boot script to tizen_rpi.h
Some environment values are used with same value.
It can be moved to tizen_rpi header.
Change-Id: I679491fc03e0381df94025044e80e476f0953db2
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Wed, 20 Feb 2019 05:43:35 +0000 (14:43 +0900)]
configs: rpi: move from rpi to tizen_rpi about tizen specific config
Tizen specific configs can be located to tizen_rpi header.
It's more easier to maintain config relevant to tizen.
Change-Id: I6aff98fd9cc4ed1d812ba217c655ce5e0ea59035
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Tue, 19 Feb 2019 05:21:20 +0000 (14:21 +0900)]
config: tizen_rpi: add tizen_rpi header file for tizen
Add the tizen_rpi header file for tizen.
It can be included tizen specific configuration for rpi boards.
Someone wants to change loglevel, follow the below command :
U-Boot> edit opts
edit : loglevel=7
- Change the loglevel value what you want.
Change-Id: I60157dd380a447ce1757921810e0b942be3d2843
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Dongwoo Lee [Fri, 1 Feb 2019 04:44:54 +0000 (13:44 +0900)]
rpi: tizen-boot: rpi3: remove dhcp as default network configuration
If there is no ip setup on environmental variable, dhcp is used as
default. But, in this case, if dhcp server is not set on connected
network neither, kernel waits dhcp server for a long time (about 3
minutes). So this patch removes dhcp option. After this, tfm handles
unconfigured network.
Change-Id: I513503d2ba81b2342c42967fc1b8cb74f17ce215
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Dongwoo Lee [Wed, 12 Dec 2018 08:19:40 +0000 (17:19 +0900)]
rpi: tizen-boot: rpi3: pass network arguments on flash mode
To setup network environment for flash manager, this patch makes
passing parameters such as 'ipaddr', 'netmask', and 'gateway' through
kernel bootcmd.Those parameters can be assigned by user-self before
using flash mode.
Change-Id: Ifda261598978b4cc985fe43e2e612fd58c49fdd1
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Jaehoon Chung [Mon, 12 Nov 2018 02:27:09 +0000 (11:27 +0900)]
packaging: added a comment how to build with gbs for rpi3
Added a comment how to build with gbs for rpi3.
If there is no comment for this, it's difficult to know how to make
u-boot image with gbs system.
(There is dependent on arm-trusted-firmware-rpi3 repository.)
Change-Id: Iee14253dd011c171104273d7285fff969e68e077
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Thu, 20 Sep 2018 06:50:03 +0000 (15:50 +0900)]
rpi: tizen-boot: rpi3/rpi3-32b: add dwc_otg option like raspbian cmdline
From raspbian cmdline.txt, from kernel related otpion, there is
dwc_otg.lpm_enable=0 which is not in Tizen u-boot booting script.
Add dwc_otg option line raspbian.
Change-Id: I37a723f63bae288f9d9d3e0b88adca01398f3c22
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Wed, 12 Sep 2018 04:28:26 +0000 (13:28 +0900)]
config: rpi3: update dtb file names in dfu_alt_info
There are wrong dtb file names. Update the wrong dtb file names
and add rpi 3 b plus model dtb.
Change-Id: I61f8833c08443ad8514b6f3bd785653baf609960
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Mon, 3 Sep 2018 02:48:13 +0000 (11:48 +0900)]
rpi: tizen-boot: rpi3/rpi3-32b: set dt filename by its model
To identify rpi3 b model and rpi3 b+ model, set dt filename by
its model.
Note: Tizen uses raspbian vendor kernel, so raspbian dt name is
used instead of mainline file name set by booting.
Change-Id: I84dc4a38e5f21527912749eee28d784245123340
Reference:
7fe77226aa29 ("rpi: Add identifier for the new RPi3 B+")
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 10 May 2018 04:13:00 +0000 (13:13 +0900)]
rpi: tizen-boot: rpi3-32b: Add boot param for support flash mode
This patch adds support for flash bootmode. If boot-param.bin is
set to 'dwnl', bootmode will be set to flash to invoke flash-init.
Change-Id: I41955d2b2dd08edd23897df4e458ca8f59eaf9a5
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Dongwoo Lee [Thu, 5 Apr 2018 05:40:01 +0000 (14:40 +0900)]
rpi: tizen-boot: Add boot parameter for support flash mode
This patch adds support for flash bootmode. If boot-param.bin is set
to 'dwnl', bootmode will be set to flash to invoke flash-init.
Change-Id: I5fe1554c4ad431f6275c0118d25a36e1f3a8ffc4
Signed-off-by: Dongwoo Lee <dwoo08.lee@samsung.com>
Seung-Woo Kim [Tue, 8 May 2018 05:39:09 +0000 (14:39 +0900)]
rpi: tizen-boot: rpi3: set console in cmdline as u-boot environment
The console in cmdline will be used by kernel as printk console
and tizen-boot script always sets console with UART device. Set
console in cmdline as u-boot environment value console and set
default uart if nothing is set.
Change-Id: I0d2743d445de8c8cf4bd43600fbc8c28a07cd0ea
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 10:57:16 +0000 (19:57 +0900)]
packaging: spec: update u-boot version to v2019.01
Update u-boot version to v2019.01.
- This branch is based on sandbox/jaehoon/rebase-v2018.03.
Change-Id: I100e24eaa361f61b66d3b81e6529e9790c6786b4
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Jaehoon Chung [Mon, 25 Feb 2019 10:38:09 +0000 (19:38 +0900)]
usb: gadget: f_thor: fix wrong type format
Fix wrong type format about buidling wanring.
Change-Id: I161651ffa9427611ef4e095bebca095d6bbf153d
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Seung-Woo Kim [Mon, 4 Jun 2018 07:04:51 +0000 (16:04 +0900)]
cmd: add missing line breaks for pr_err()
After the commit
9b643e312d52 ("treewide: replace with error() with
pr_err()"), there are some pr_err() with no line break. Add missing
line breaks.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[sw0312.kim: cherry-pick from mainline to fix error log]
Change-Id: I8aa616cb4c1e6d4ab250ba89cb75214f33488a6f
Seung-Woo Kim [Fri, 25 May 2018 05:21:01 +0000 (14:21 +0900)]
gadget: f_thor: Fix memory leaks of usb request and its buffer
There are memory leaks of usb request and its buffer for ep0,
in_ep, and out ep. Fix memory leaks of usb request and its buffer.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
[sw0312.kim: fix conflict about int_ep from thor_eps_setup()]
Change-Id: I606d039d53847d0e0850c5bcbceca451bdbb1c02
projects / platform / kernel / u-boot.git / log