Takashi Iwai [Tue, 22 Jan 2013 17:42:39 +0000 (18:42 +0100)]
ALSA: hda - Select auto-parser as default for AD codecs
Now all AD codecs have the proper BIOS auto-parser, and we can make
it for default, finally. (AD1988 already did it because it had the
auto-parser.)
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 17:18:42 +0000 (18:18 +0100)]
ALSA: hda - Convert some static quirks to fixup codes for AD codecs
Other remaining quirks are mostly resolvable via pincfg fixes, even if
it matters.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 15:45:58 +0000 (16:45 +0100)]
ALSA: hda - Rearrange for dropping static quirk codes in AD codec driver
As done for patch_conexant.c, put ifdef ENABLE_AD_STATIC_QUIRKS for
preparing t odrop the static quirk codes in patch_analog.c.
The whole static quirk code can be omitted by commenting out
ENABLE_AD_STATIC_QUIRKS define now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 14:31:33 +0000 (15:31 +0100)]
ALSA: hda - Add SPDIF mux control to AD codec auto-parser
AD codecs have strange implementations for choosing the SPDIF-output
mux source: the digital audio out widget may take the sources from
multiple connections, where 0x01 indicates it's a PCM while others
point ADCs. It's obviously invalid in the HD-audio spec POV, but it's
somehow convincing, too. And, to make things more complex, AD1988A
and AD1882 have deeper connection routes that aren't expressed
correctly.
In this patch, the SPDIF mux control is implemented in two ways:
- For easier one like AD1981, AD1983, AD1884 and AD1984, where the
SPDIF audio out widget takes just two or three sources, we can
simply implement via the normal input_mux and connection verb
calls.
- For the complex routes like AD1988A (but not AD1988B) or AD1882, we
prepare "faked" paths represented statically, and switch the paths
using these static ones, instead of parsing the routes from the
widget tree.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 14:24:30 +0000 (15:24 +0100)]
ALSA: hda - Combine snd_hda_codec_flush_*_cache() to a single function
Since both snd_hda_codec_flush_amp_cache() and
snd_hda_codec_flush_cmd_cache() are called usually at the same time,
we can simply combine them to a single function,
snd_hda_codec_flush_cache().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 14:18:17 +0000 (15:18 +0100)]
ALSA: hda - Fix missing call of cmd flush in capture volume put callback
The capture volume put callback may call the node selection change,
and its actual call won't be triggered unless flushed. In general,
we always need to call both snd_hda_codec_flush_amp_cache() and
snd_hda_codec_flush_cmd_cache() at the same place...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 14:17:20 +0000 (15:17 +0100)]
ALSA: hda - Add missing exports to helper functions
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 08:34:48 +0000 (09:34 +0100)]
ALSA: hda - Revive SPDIF mux for IDT/STAC codecs
The stuff that was dropped while transition to the generic parser is
now recovered.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 22 Jan 2013 06:46:31 +0000 (07:46 +0100)]
ALSA: hda - Disable HP auto-mute during independent HP mode
Both the HP auto-mute and the independent HP mode conflict with each
other. Make HP auto-mute disabled (only for the affected HP jack)
during the driver is in HP independent mode.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 15:50:09 +0000 (16:50 +0100)]
ALSA: hda - Set individual name to secondary analog PCM stream
It'd be better to give another name to the secondary (alt) analog PCM
stream, which is dedicated for the independent HP out and extra
inputs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 15:40:16 +0000 (16:40 +0100)]
ALSA: hda - Add aamix NID to AD codecs
The aamix NIDs are also missing for AD codecs. All AD codecs seem to
have a (more or less) working aamix widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 15:25:18 +0000 (16:25 +0100)]
ALSA: hda - Add aamix NID to IDT 92HD codecs
IDT codecs have analog-loopback mixer widgets, but we haven't cared
about it, so far. Let's set them. This will avoid also possible
wrong routes for the input paths.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 15:10:56 +0000 (16:10 +0100)]
ALSA: hda - Remove superfluous header inclusions
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 14:15:55 +0000 (15:15 +0100)]
ALSA: hda - Enable parsing the independent HP mode as default for VIA codecs
The original VIA codec parser enabled it as default, so let's keep the
behavior as it was.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 14:11:25 +0000 (15:11 +0100)]
ALSA: hda - Fix conflicts between Loopback Mixing and Independent HP
This patch eventually fixes two issues:
- Handle the case where the primary output is a headphone and can have
independent HP mode;
so far we checked only the case where the headphone is the secondary
output.
- Fix the conflict of HP independent mode and aamix mode;
when switched to aamix mode, the DAC might be also switched to
another widget shared with other outputs. Then even if we disable
the DAC for the original output, it doesn't change -- because the
active route is from another (shared) DAC to HP pin through aamix.
So, in such a case, we have to prohibit the switch to aamix for HP
routes.
This fixes issues appearing on VT codecs.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 13:24:31 +0000 (14:24 +0100)]
ALSA: hda - Check aamix-output paths from other DACs, too
Many codecs provide routes to multiple output pins through an aamix
widget, but most of them do it only from a single DAC. However, the
current generic parser checks only the aamix paths from the original
(directly bound) DACs through aamix NID, and miss the path:
primary DAC -> aamix -> target out pin
This patch adds a more check for the routes like the above.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 10:43:19 +0000 (11:43 +0100)]
ALSA: hda - Add missing badness evaluation for unresolved paths
When a patch couldn't be resolved in try_assign_dacs() although the
target DAC is expected, we forgot to add a proper badness value but
continued.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 09:49:05 +0000 (10:49 +0100)]
ALSA: hda - Set the pin targets after deciding output config
Since fill_and_eval_dacs() may be called repeatedly with different
configurations, setting pinctls at each time there isn't optimal.
We can set it better only once after deciding the output configuration
in parse_output_paths().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 21 Jan 2013 09:43:18 +0000 (10:43 +0100)]
ALSA: hda - Improve debug prints for output paths
Print the information of outputs in a bit more details and concisely
in a single place instead of printing the path at each time when
detected.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 17:25:45 +0000 (18:25 +0100)]
ALSA: hda/conexant - Set mixer NID 0x19 for CX20551 codec
Conexant CX20551 codec has a mixer in NID 0x19 and a few outputs have
to take the input through this widget.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 15:38:08 +0000 (16:38 +0100)]
ALSA: hda - Correct more array rooms in hda_gen_spec
Looking through the whole definitions, some fields have inappropriate
array sizes, especially about the capture. The array assigned to each
input (pin) should have HDA_MAX_NUM_INPUTS entries while the array
assigned to each ADC should have AUTO_CFG_MAX_INS entries.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 15:23:25 +0000 (16:23 +0100)]
ALSA: hda - Fix the wrong adc_idx for capture source
The patch "ALSA: hda - fix wrong adc_idx in generic parser" fixed the
adc_idx for the capture volume and capture switch controls. But also
modified the adc_idx retrieval for the capture source controls
wrongly. As multiple capture source controls are created in a single
shot with counts > 1, the id.index doesn't contain the real value.
The real index has to be taken via snd_ctl_get_ioffidx() as in the
original code.
This patch reverts the fixes partially to recover from the
regression.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Fri, 18 Jan 2013 14:43:03 +0000 (15:43 +0100)]
ALSA: hda - Don't add unnecessary indices on HDMI and SPDIF
If there's one each of HDMI and SPDIF, we should not add an index
on the one that comes second.
[slight code refactoring by tiwai]
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Fri, 18 Jan 2013 14:43:02 +0000 (15:43 +0100)]
ALSA: hda - don't compare with yourself in fill_input_pin_labels
Just stumbled over this one while reading the code.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Fri, 18 Jan 2013 14:43:01 +0000 (15:43 +0100)]
ALSA: hda - make sure there are enough input labels and paths
I found a codec configuration which had six inputs, so the max of
five was not appropriate.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 14:41:34 +0000 (15:41 +0100)]
ALSA: hda - Fix speaker pin of FSC Lifebook S7110 laptop
Some BIOS version of FSC Lifebook S7110 laptop seems to give a wrong
default pin config for NID 0x15, which confuses the parser. Give a
fixup to correct the value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 13:37:16 +0000 (14:37 +0100)]
ALSA: hda - Add boost to line inputs, too
Although I commented that boost volumes would be added only for
line-in and mic pins in the source code, the actual code excludes but
for mic-in. Fix it to accept the line-ins, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 13:28:07 +0000 (14:28 +0100)]
ALSA: hda/sigmatel - Add bass speaker support for HP ENVY Spectre XT
The pin configuration for the bass speaker needs to be corrected in a
fixup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 13:10:00 +0000 (14:10 +0100)]
ALSA: hda - Consolidate cap_sync_hook and capture_switch_hook
Two hooks in hda_gen_spec, cap_sync_hook and capture_switch_hook, play
very similar roles. The only differences are that the former is
called more often (e.g. at init or switching capsrc) while the latter
can take an on/off argument.
As a more generic implementation, consolidate these two hooks, and
pass snd_ctl_elem_value pointer as the second argument. If the
secondary argument is non-NULL, it can take the on/off value, so the
caller handles it like the former capture_switch_hook. If it's NULL,
it's called in the init or capsrc switch case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 13:01:14 +0000 (14:01 +0100)]
ALSA: hda - Fix missing call of capture_switch_hook
When a standard capture switch without multiple binding is used, the
call for capture_switch_hook isn't called properly. Replace the put
ops to add the hook call in that case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 10:07:15 +0000 (11:07 +0100)]
ALSA: hda - Look for boost controls more deeply
In the current generic parser code, we look for the (mic) boost
controls only on input pins. But many codecs assign the boost volume
to a widget connected to each input pin instead of the input amp of
the pin itself.
In this patch, the parser tries to look through more widgets connected
to the pin and find a boost amp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 10:01:33 +0000 (11:01 +0100)]
ALSA: hda - Fix invalid mute in path activation
When an amp in the activation path is associated with mixer controls,
activate_amp() tries to skip the initialization. It's good, but only
if the mixer really initializes both mute and volume. Otherwise,
either the mute of the volume is left uninitialized.
This patch adds this missing check and properly initialize the
partially controlled amps in an activation path.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 09:17:30 +0000 (10:17 +0100)]
ALSA: hda - Unify input label creations in generic parser
There are a few places creating the labels and indices of kctls for
each input pin in the current generic parser code. This is redundant
and makes harder to maintain. Let's create the labels and indices at
once and keep them in hda_gen_spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 09:01:15 +0000 (10:01 +0100)]
ALSA: hda - Keep autocfg.input idx value in imux table
Since the imux table entries can be a subset of autocfg.input table,
the indices of these aren't always same. For passing the proper index
value of autocfg.input at creating input ctl labels (via
snd_hda_autocfg_input_label()), keep the corresponding autocfg.input
idx value in the index field of each imux item, which isn't used in
the generic driver.
Also, this makes easier to check the invalid imux pin for stereo mix.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 18 Jan 2013 06:51:17 +0000 (07:51 +0100)]
ALSA: hda - Fix missing unsol event handler in some codec drivers
This resulted in non-working auto-mute behavior, of course...
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 16:07:59 +0000 (17:07 +0100)]
ALSA: hda - Use generic parser for STAC/IDT codec driver
Finally we reached here. All codecs driver (except for CA0132, which
has really device-specific requirements) have been converted to use
the generic parser.
This patch appears bigger than others since it also involves with the
code shuffling, but mostly the cut-off of parser codes and adapt to
the generic parser flags. Most of fixup codecs haven't been changed
but just removed a few unnecessary codes.
The only missing stuff is the SPDIF mux control. It'll be added again
later.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 15:20:14 +0000 (16:20 +0100)]
Merge branch 'test/hda-gen-parser' into test/hda-migrate
* test/hda-gen-parser:
ALSA: hda - Improve naming rule for primary output
ALSA: hda - Add PCM capture hook to hda_gen_spec
ALSA: hda - Record all detected ADCs in hda_gen_spec
ALSA: hda - Move vmaster TLV parsing to snd_hda_gen_parse_auto_config()
ALSA: hda - Add input jack mode enum controls to generic parser
ALSA: hda - Give more comments to hda_gen_spec flags
ALSA: hda - Add suppress_auto_mute flag to hda_gen_spec
ALSA: hda - Record the current speaker / LO mute status in hda_gen_spec
ALSA: hda - Properly call automute/switch hooks at init
Takashi Iwai [Thu, 17 Jan 2013 15:18:11 +0000 (16:18 +0100)]
ALSA: hda - Improve naming rule for primary output
When the volume or mute control of the primary output is shared with
other (headphone or speaker) outputs, we shouldn't name it as a
specific output type but rather name it with the channel name or a
generic name like "PCM".
Also, this check should be performed individually for the volume and
the mute controls because some codecs may have shared volumes but
separate mute controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 14:57:10 +0000 (15:57 +0100)]
ALSA: hda - Add PCM capture hook to hda_gen_spec
Not only PCM playback, a hook for PCM capture would be required for
power controls in codec drivers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 14:53:29 +0000 (15:53 +0100)]
ALSA: hda - Record all detected ADCs in hda_gen_spec
Since the generic parser reduces the ADC list, copy the list of the
all detected ADCs and keep it.
This list can be later referred by the codec driver for finer power
controls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 09:25:15 +0000 (10:25 +0100)]
ALSA: hda - Move vmaster TLV parsing to snd_hda_gen_parse_auto_config()
Add vmaster_tlv[] to hda_gen_spec and store the suggested TLV data
in snd_hda_gen_parse_auto_config(). This allows the codec driver to
correct the TLV data (e.g. mute capability) before actually creating
vmaster instance.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 08:52:11 +0000 (09:52 +0100)]
ALSA: hda - Add input jack mode enum controls to generic parser
Just like the jack mode enum ctls for output jacks, add the support
for similar enum ctls for input pins to control the bias Vref.
The new controls will be added when spec->add_in_jack_modes is set
either by the codec driver or by a hint string.
Note that ground and 100% vrefs are excluded from the list for
simplicity, currently. We may add a new flag to allow them, too.
But I guess it's easier to put a value override in the pinfix in such
a case.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 17 Jan 2013 07:49:01 +0000 (08:49 +0100)]
ALSA: hda - Minor cleanup/fixes for patch_sigmatel.c fixup transition
- spec->hp_detect has to be overridden in HDA_FIXUP_ACT_PARSE, not in
PRE_PARSE.
- Remove err == 0 check but return directly -EINVAL from
stac92xx_parse_auto_config()
- Set spec->default_polarity for 92HD71bxx
- Some code shuffles
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 16 Jan 2013 17:28:38 +0000 (18:28 +0100)]
ALSA: hda - Give more comments to hda_gen_spec flags
Since we have many bit flags in hda_gen_spec, rearrange in sections
and give more comments there.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 16 Jan 2013 17:20:07 +0000 (18:20 +0100)]
ALSA: hda - Add suppress_auto_mute flag to hda_gen_spec
A new flag to skip the auto-mute handling in the generic parser, just
like suppress_auto_mic flag. It has to be set before calling
snd_hda_gen_parse_auto_config().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 16 Jan 2013 17:18:00 +0000 (18:18 +0100)]
ALSA: hda - Record the current speaker / LO mute status in hda_gen_spec
... to be referred by the codec driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 16 Jan 2013 17:08:55 +0000 (18:08 +0100)]
ALSA: hda - Properly call automute/switch hooks at init
... and a little bit of code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 16 Jan 2013 15:25:24 +0000 (16:25 +0100)]
Merge branch 'test/hda-gen-parser' into test/hda-migrate
* test/hda-gen-parser:
ALSA: hda - Make sure fill_all_dac_nids is called for digital only codecs
ALSA: hda - force different capture controls if amp caps differ
ALSA: hda - do not add non-existing Mic boost controls
ALSA: hda - initialize channel counts correctly
ALSA: hda - fix wrong adc_idx in generic parser
ALSA: hda - Check array bounds in get_input_path
ALSA: hda - Add prefer_hp_amp flag to hda_gen_spec
ALSA: hda - fix OOPS in hda_mark_cmd_cache_dirty
ALSA: hda - Check pincap while parsing the configuration
David Henningsson [Wed, 16 Jan 2013 14:58:45 +0000 (15:58 +0100)]
ALSA: hda - Make sure fill_all_dac_nids is called for digital only codecs
Otherwise no PCM will be built for codecs without analog I/O.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Wed, 16 Jan 2013 14:58:44 +0000 (15:58 +0100)]
ALSA: hda - force different capture controls if amp caps differ
Otherwise setting the capture volume for amps will be weird and
inconsistent (it will try to set values outside the range of the
second amp based on capabilities of the first amp).
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Wed, 16 Jan 2013 14:58:43 +0000 (15:58 +0100)]
ALSA: hda - do not add non-existing Mic boost controls
If the input node does not have any volume capable input amp,
don't add such a control.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Wed, 16 Jan 2013 10:45:37 +0000 (11:45 +0100)]
ALSA: hda - initialize channel counts correctly
Even a single DAC can output two channels, so the channel count
is twice the number of DACs.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Wed, 16 Jan 2013 10:45:36 +0000 (11:45 +0100)]
ALSA: hda - fix wrong adc_idx in generic parser
We use knew->index for adc_idx when we create "Capture Volume" and
"Capture Switch", so use the same to retrieve adc_idx.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Wed, 16 Jan 2013 10:45:35 +0000 (11:45 +0100)]
ALSA: hda - Check array bounds in get_input_path
This gives us some additional safety.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 15 Jan 2013 17:45:53 +0000 (18:45 +0100)]
ALSA: hda - Add prefer_hp_amp flag to hda_gen_spec
Add a new flag to indicate whether HP amp is turned on as default for
speaker or line-outs, and enable this for ALC260 codec, as many
machines with this codec require the HP amp even for speakers.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
David Henningsson [Tue, 15 Jan 2013 14:27:19 +0000 (15:27 +0100)]
ALSA: hda - fix OOPS in hda_mark_cmd_cache_dirty
Obvious copy-paste error.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 15 Jan 2013 10:22:01 +0000 (11:22 +0100)]
ALSA: hda/sigmatel - Remove superfluous fields from sigmatel_spec
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 15 Jan 2013 10:20:50 +0000 (11:20 +0100)]
ALSA: hda/sigmatel - Move w/a for HP Mini 110 LED to fixup table
Instead of checking the codec SSID in find_mute_led_cfg() for HP Mini
110, set the proper spec->default_polairty in the fixup table.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 15 Jan 2013 10:12:18 +0000 (11:12 +0100)]
ALSA: hda/sigmatel - Remove PCI id check in find_mute_led_cfg()
The PCI vendor ID check in find_mute_led_cfg() is now superfluous
because the function is called in the fixup table entries of HP
machines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 17:06:34 +0000 (18:06 +0100)]
ALSA: hda - Use standard fixup table for IDT92HD83xxx
Finally all codecs in patch_sigmatel.c have been converted to use the
standard fixup helpers. This change also includes trivial cleanups
like the call of common setup for GPIO LED or the removal of unused
function.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 16:30:04 +0000 (17:30 +0100)]
ALSA: hda - Use standard fixup table for IDT92HD73xx
This one is rather a simple conversion. The fixups for Dell machines
are implemented by fixup functions in the end.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 16:05:25 +0000 (17:05 +0100)]
ALSA: hda - Use standard fixup table for IDT92HD71Bxx
This time, the only intrusive changes are for HP machines.
As the mute LED fixup and the bass speaker switch are required only
for HP machines, we can move these checks into the fixup entries; the
former is applied generically to all HP machines while the latter for
only certain models.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 15 Jan 2013 07:45:33 +0000 (08:45 +0100)]
ALSA: hda - Check pincap while parsing the configuration
Sometimes (or rather often) BIOS sets the pin default configurations
obviously wrongly. Looking through these failures, one common pattern
is to enable some dead pins that are usually marked as speaker pins.
In such a case, we can skip them if the pins don't have the output
capability.
In this patch, add a check for the valid pin cap bit for each parsed
pin, and filter out when it's invalid.
The fix was originally suggested by Raymond Yau.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 15:03:38 +0000 (16:03 +0100)]
ALSA: hda - Use standard fixup table for STAC927x
This conversion is a bit tricky. Since STAC927x may take two
different volume-knob initialization values depending on the model, a
new flag, spec->volknob_init, is introduced to indicate whether it's
the standard volume-knob initialization or not.
Also, Dell BIOS model is now directly mapped onto the fixup table
instead of parsing in the function. This resulted in a new model ref,
STAC_927X_DELL_BIOS_SPDIF, which is a chained entry.
Also, for reducing the fixups, virtual entries like
STAC_927X_DELL_DMIC and STAC_D965_VERBS are introduced.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 14:20:13 +0000 (15:20 +0100)]
ALSA: hda - Use standard fixup table for STAC922x
Rather straightforward conversion, except for ones for Intel Mac.
As Intel Mac have only unique codec SSIDs, we need to remap the fixup
again for the codec SSID and call the new fixup there.
Also, we can reduce model enums like STAC_MACMINI, which are model
aliases for backward compatibility, since they can be pointed directly
via hda_model_fixup table.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 13:46:51 +0000 (14:46 +0100)]
ALSA: hda - Use standard fixup table for STAC9205
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 13:29:36 +0000 (14:29 +0100)]
ALSA: hda - Use standard fixup table for STAC9872
Now for STAC9872. It has a small fixup table, fortunately.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 13:20:16 +0000 (14:20 +0100)]
ALSA: hda - Use standard fixup table for STAC925x
Similar like the previous commit, convert patch_stac925x() to use the
standard fixup table.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 13:06:26 +0000 (14:06 +0100)]
ALSA: hda - Use standard fixup table for STAC9200
Convert patch_stac9200() to use the standard fixup table instead of
manual switch-case with board_config.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 14 Jan 2013 11:36:18 +0000 (12:36 +0100)]
Merge branch 'test/hda-gen-parser' into test/hda-migrate
* test/hda-gen-parser:
ALSA: hda - Add capture_switch_hook to generic parser
Takashi Iwai [Mon, 14 Jan 2013 11:13:06 +0000 (12:13 +0100)]
ALSA: hda - Add capture_switch_hook to generic parser
Add a hook for the capture mixer switch. This will be used by IDT
codecs for controlling the mic-mute LED.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 7 Jan 2013 11:27:36 +0000 (12:27 +0100)]
ALSA: hda - Use generic parser for VIA codec driver
Yet another step forward. As all features for VIA codecs have been
implemented in the generic driver, we can move on to migrate the VIA
codec parser, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 21 Dec 2012 14:17:06 +0000 (15:17 +0100)]
ALSA: hda - Add generic parser support to Analog Device codec driver
This patch adds the support for the generic auto-parser to AD codec
driver. For AD1988, the old code is replaced simply with the new
generic parser. For other codecs, new model "auto" is added and
directed to use the generic parser.
No fixup codes have been implemented yet as of now. Eventually we'd
replace each static quirk with the generic parser + fixup.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 20 Dec 2012 15:38:19 +0000 (16:38 +0100)]
ALSA: hda - Rearrange for dropping static quirk codes in Coexant driver
Just shuffle the codes and add ifdefs for testing to drop the static
quirk codes from patch_conexant.c.
By commenting out ENABLE_CXT_STATIC_QUIRKS define at the beginning of
the file, you can disable the whole static codes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 20 Dec 2012 15:34:12 +0000 (16:34 +0100)]
ALSA: hda - Use generic parser in Conexant codec driver
... and drop most of own parser code.
It doesn't replace any present static quirks, though.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Dec 2012 15:39:18 +0000 (16:39 +0100)]
ALSA: hda - Use generic parser for Cirrus codec driver
This time, the target is Cirrus codec. Its parser is a subset of
generic parser, so we can migrate fully with it now.
The only tricky part is the handling of SPDIF automute.
Cirrus driver sets the SPDIF out plug over the headphone. As a
workaround, set spec->gen.master_mute for toggling the headphone (and
other) mute.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Dec 2012 17:04:37 +0000 (18:04 +0100)]
ALSA: hda - Use generic parser for CA0110 codec
CA0110 codec is a fairly straightforward hardware implementation,
and we can use the generic parser almost as is.
Just set spec->multi_cap_vol flag to follow the current behavior.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Dec 2012 16:35:47 +0000 (17:35 +0100)]
ALSA: hda - Use generic codec parser for C-Media codecs
Replace the old parser code for C-Media auto-parser with the latest
generic parser. For compatibility reason, the static bindings are
still left, but they could be cleaned up in future.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 19 Dec 2012 16:37:12 +0000 (17:37 +0100)]
ALSA: hda - Remove superfluous kconfig depends
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 11 Jan 2013 16:48:22 +0000 (17:48 +0100)]
ALSA: hda - Allow user to give hints for codec parser behavior
Through the hints via sysfs or patch, user can set specific behavior
flags for the generic parser now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Fri, 11 Jan 2013 16:40:31 +0000 (17:40 +0100)]
ALSA: hda - Add snd_hda_get_int_hint() helper function
It'll be used in hda_generic.c, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 17:21:56 +0000 (18:21 +0100)]
ALSA: hda - Protect user-defined arrays via mutex
The pincfgs, init_verbs and hints set by sysfs or patch might be
changed dynamically on the fly, thus we need to protect it.
Add a simple protection via a mutex.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 16:33:58 +0000 (17:33 +0100)]
ALSA: hda/realtek - Generic mute LED implementation for HP laptops
As David Henningsson recently suggested, some HP laptops use an unused
mic pin for controlling a mute LED, and this information is provided
via DMI string "HP_Mute_LED_X_Y" string. This patch adds the generic
support for such cases, as we've already done in patch_sigmatel.c.
This is applied generically to all devices with ID 0x103c.
But as we don't know whether the device 103c:1586 really contains
HP_Mute_LED_X_Y DMI string, still keep the static setup for this
device using the mic2 pin 0x19.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 16:14:29 +0000 (17:14 +0100)]
ALSA: hda/realtek - Fix the timing for some fixups
Some fixups such as setting the flags influencing on the parser
behavior should be applied before actually parsing the tree.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 16:10:40 +0000 (17:10 +0100)]
ALSA: hda/realtek - Add a fixup for FSC S7020 laptop
Try to recover from the regression: set the HP amp for the speaker and
add the hp jack mode enum as default.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 15:57:58 +0000 (16:57 +0100)]
ALSA: hda - Add output jack mode enum controls
Add the enum controls for changing the headphone amp bits of output
jacks, such as "Headphone Jack Mode". This feature isn't enabled as
default, so far, unless spec->add_out_jack_modes flag is set.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 15:10:06 +0000 (16:10 +0100)]
ALSA: hda - Update automute / automic upon jack retasking
When a multi-io jack is switched to another direction, call the
automute and autoswitch update functions, as this jack won't be used
as the headphone or the mic jack that may turn off others.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 09:18:14 +0000 (10:18 +0100)]
ALSA: hda - Add a new fixup type to override pinctl values
Add a new fixup type, HDA_FIXUP_PINCTLS, for overriding the pinctl
values of the given pins. It takes the same array of struct pintbl
like HDA_FIXUP_PINS, but each entry contains the pinctl value instead
of the pin default config value.
This patch also replaces the corresponding codes in patch_realtek.c.
Without this change, the direct call of verbs may be overridden again
by the later call of pinctl restoration by the driver.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 09:12:22 +0000 (10:12 +0100)]
ALSA: hda/realtek - Read the cached pinctl value in fixups
... instead of reading the value from the codec at each time.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 08:52:52 +0000 (09:52 +0100)]
ALSA: hda/realtek - Drop aliases for old fixups
Now the whole codebase has been changed from the earlier kernels, it
makes little sense to keep these aliases. Simply replace with the
official names.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 08:45:13 +0000 (09:45 +0100)]
ALSA: hda - Avoid auto-mute or auto-mic of retasked jacks
When a jack is retasked as a different direction (e.g. a mic jack is
used as a CLFE output), such a jack shouldn't be counted as the target
for the automatic jack switching. Skip the automute or the autoswitch
when the current pinctl direction is different from what we suppose.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 08:33:29 +0000 (09:33 +0100)]
ALSA: hda - Manage current pinctl values in generic parser
Use the new pin target accessors for managing the current pinctl
values in the generic parser. The pinctl values of all active pins
are once determined at the initialization phase, and stored via
snd_hda_codec_set_pin_target(). This will be referred again in the
codec init or resume phase to set the actual pinctl.
This value is kept while the auto-mute. When a line-out or a speaker
pin is muted by auto-mute, the driver simply disables the pin, but it
doesn't touch the cached pinctl target value. Upon unmute, this value
is used to restore the original pinctl in return.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 07:56:46 +0000 (08:56 +0100)]
ALSA: hda - More strict correction of invalid pinctl bits
Check more strictly about the validity of pinctl values in
snd_hda_set_pin_ctl() and correct the wrong bits automatically.
Also provide the helper function to correct pinctl bits to codec
drivers.
This automatically fixes the invalid pinctl writes that are found in
a few Realtek fixups for NID 0x0f amp like ASUS A6Rp.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Thu, 10 Jan 2013 07:38:04 +0000 (08:38 +0100)]
ALSA: hda - Add helper functions to cache the current pinctl target
We already have the list of whole pin widgets and there is an unused
space in the list; let's use it for caching the current pinctl value.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 9 Jan 2013 08:28:20 +0000 (09:28 +0100)]
ALSA: hda - Clear the dropped paths properly
When a DAC is reassigned from surrounds to front or ADCs are reduced
due to incomplete imux, we clear the path indices but the path
instances remain as is. Since the paths might be still referred
through the whole path list parsing (e.g. is_active_nid()), we should
clear these path instances as well.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 9 Jan 2013 08:14:23 +0000 (09:14 +0100)]
ALSA: hda - Allow aamix as a capture source
Since some codecs can choose the aamix as a capture source, we should
support it as well. When spec->add_stereo_mix_input flag is set, the
parser checks the availability of aamix as the input source, and adds
the paths automatically when possible.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 9 Jan 2013 08:06:18 +0000 (09:06 +0100)]
ALSA: hda - Fix inconsistent input_paths after ADC reduction
In the current parser code, the input_paths[] may become inconsistent
when some of detected ADCs are dropped due to incomplete inputs, since
the driver rearranges only adc_nids[] but doesn't touch input_paths[].
This patch fixes the issue, and also it optimizes the reachability
checks by simply referring to the parsed input_paths[] instead of
calling is_reachable() again for each connection.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 9 Jan 2013 07:46:34 +0000 (08:46 +0100)]
ALSA: hda - Return "Headphone Mic" from hda_get_autocfg_input_label()
Instead of handling special cases in the caller side, give a proper
name string "Headphone Mic" from hda_get_autocfg_input_label() when
the headhpone jack pin is specified as an input.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Wed, 9 Jan 2013 07:41:41 +0000 (08:41 +0100)]
ALSA: hda - Exclude aamix from capture paths
The capture paths shouldn't contain the analog loopback mixer.
Pass a proper argument to exclude the aamix NID.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Mon, 7 Jan 2013 15:32:11 +0000 (16:32 +0100)]
ALSA: hda - Add a flag to suppress mic auto-switch
Add a new flag spec->suppress_mic_auto_switch for codecs that don't
support unsol events properly like VT1708.
Signed-off-by: Takashi Iwai <tiwai@suse.de>