GStreamer: improve camerabin audio settings checking.

Don't try setting a sample rate or a channel count equal to 0.

Change-Id: Ib2e1728f0d9af09df9c4d3fd1322b5cb174a2981
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer camerabin: don't recreate camera source on device change.

Change-Id: If62573b11c8e3112d386d93de9a504f49965d597
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer: remove unused function and enum.

Change-Id: I67b329784d94e60b94c10d4a8942d02b050e0b2c
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer: runtime check for controls that require GstPhotography.

Exposure, Flash, Focus and Locks controls were always initialized,
even when the GstPhotography interface was not available (on desktop
for example), causing some warnings and fooling the user in believing
that these features were available.
These controls are now lazily initialized and only when
GstPhotography is available.

The zoom control is not compile-checked anymore since it doesn't
actually require GstPhotography.

Change-Id: I5e8315d796dd920c9c29ccfa4155707f5f0fd7dc
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer 1.0: fix some problems with QGstVideoRendererSink.

- Correctly free resources on deletion.
- Correctly stop the sink. We were stopping only when null caps
  were passed to set_caps() but that doesn't seem to always happen.
  Implement GstBaseSink.stop() which is always and consistently
  called by GStreamer.
- Remove pre-roll support (as done previously for 0.10, see
  commit 3b20608f).

Change-Id: I4c5808938f244f4f8a35e121a3a4a862588b752d
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer: implemented QCameraViewfinderSettingsControl2.

Change-Id: I4436e39c152f6c251792c1504d4a7b57db7b9d9a
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer 1.0: fix frame rate retrieved with QGstUtils::formatFromCaps.

Change-Id: I88e8416e50440bbd14b34a8b2b3b262b5c8401ab
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

GStreamer: fix camerabin state and status changes.

Not all status changes where reported and setting the QCamera
to LoadedState was not actually loading anything.

State and status changes have been refactored.
Camera status is now reported directly by the camera session.
Setting the camera state to LoadedState now sets the camerabin to
GST_STATE_READY, that allows to query for camera capabilities without
having to start the camera (and have a valid viewfinder).

Change-Id: I249b1ad32690679ff34a427410bc709ed3ab461c
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

Merge remote-tracking branch 'origin/5.5' into dev

Change-Id: I89bfde0a1618ebf3b34948c1c1f74c2cbf5d8abf

Fix BSD license headers

Change-Id: I639ed933b789393fa50630af133e51abe3d7fae3
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Use configured GStreamer version.

The gstreamer version detected or set by the configure script can be
overridden by passing GST_VERSION=<version> to qmake qtmultimedia.pro.

Change-Id: I6f2eac3705d3d6fe0ec8e79042017add6751ee8c
Reviewed-by: Oswald Buddenhagen <oswald.buddenhagen@theqtcompany.com>

Update copyright headers

Qt copyrights are now in The Qt Company, so we could update the source
code headers accordingly. In the same go we should also fix the links to
point to qt.io.

Change-Id: I1c6faa4f59f8eca54f01ef20941fa60161dd7872
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Camera zoom control - version for the AVFoundation plugin

AVFCameraZoomControl for AVFoundation plugin (videoZoomFactor in
AVCaptureDeviceFormat). iOS only.

Change-Id: I585b8df4c2a477971ada7bd81fabbd44f2371d98
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

AVFCameraExposureControl - exposure control for iOS

Exposure control, version for AVFoundation plugin (this code is using
quite a new API, iOS >=8 only).

Change-Id: I6871a758e8dfb98ab46b66d91a44142163e0bb44
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

AVFCameraFocusControl - focus control for iOS / OS X

Camera focus control for AVFoundation plugin (iOS/OS X).

Change-Id: I0a79e7057ecbb66413debb8eac0f48ff679fc7ba
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Camera: update viewfinder settings on Loaded status.

Change-Id: I9a341c7500b09d39554118689e6e83cd1b798e39
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

iOS video frame render implementation.

Uses CVTextureCache, iOS only for now, OS-X code could be ported
but will need further work to support TEXTURE_RECTANGLE in the
QVideoNode classes.

When we can’t share a context, falls back to an offscreen window,
FBO rendering and grabbing a QImage.

Change-Id: I23b831fdcc63aeb1b67b7741d8d56779470240d3
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Add video filtering support to VideoOutput

Add the QAbstractVideoFilter base class and integrate it with VideoOutput.

This can be used to perform arbitrary filtering or image processing
on the frames of a video stream of a VideoOutput element right before
the OpenGL texture is provided to the scenegraph by the video node.

This opens up the possibility to integrate computer vision
frameworks or accelerated image processing with Qt Quick applications
that display video streams using Qt Multimedia.

Conceptually it is somewhat similar to QVideoProbe, this
approach however allows modifying the frame, in real time
with tight integration to the scenegraph node, and targets
Qt Quick meaning setting up the filter and processing the results
of the computations happen completely in QML.

[ChangeLog] Added QAbstractVideoFilter that serves as a base class for QML
video filtering elements that integrate compute, vision, and image processing
frameworks with VideoOutput.

Change-Id: Ice1483f8c2daec5a43536978627a7bbb64549480
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Merge "Merge remote-tracking branch 'origin/5.4' into dev" into refs/staging/dev

Fix initialization order

Avoid the following warning:

In file included from qgstreamerplayersession.cpp:34:0:
qgstreamerplayersession.h: In constructor ‘QGstreamerPlayerSession::QGstreamerPlayerSession(QObject*)’:
qgstreamerplayersession.h:203:10: warning: ‘QGstreamerPlayerSession::m_usingColorspaceElement’ will be initialized after [-Wreorder]
     bool m_usingColorspaceElement;
          ^
qgstreamerplayersession.h:197:17: warning:   ‘GstElement* QGstreamerPlayerSession::m_videoSink’ [-Wreorder]
     GstElement* m_videoSink;
                 ^
qgstreamerplayersession.cpp:107:1: warning:   when initialized here [-Wreorder]
 QGstreamerPlayerSession::QGstreamerPlayerSession(QObject *parent)
 ^

Change-Id: Ic4dfe6ead19db8d581cc7de622f478e63524715b
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Merge remote-tracking branch 'origin/5.4' into dev

Conflicts:
.qmake.conf
src/plugins/gstreamer/camerabin/camerabinsession.cpp

Change-Id: I66a6f3efc5391013934b6b321073c31f25e1de26

Bump version

Change-Id: I29a6579deefb4ca80bb014c43ee34697fa89bd47

Rename camera classes to avoid name clash.

Change-Id: I08fe8f7e75bdbf2c4975863642072061741b5bc6
Reviewed-by: Filipe Azevedo <filipe.azevedo@kdab.com>
Reviewed-by: Sean Harmer <sean.harmer@kdab.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

New camera viewfinder settings API.

There already was a control interface for the viewfinder settings
but no real public C++ API and a partial QML API.

This patch adds a new C++ API and improves the QML API.

Supported viewfinder settings are resolution, minimumFrameRate,
maximumFrameRate and pixelFormat. The camera can be queried for
the supported values for each of these settings.

A new control interface was created to match the new API.

Change-Id: I289fea038fe46277a5516c956a64280da09ed985
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

Add resolution and fps on mfw_v4lsrc

Add support for changing resolution and frame rate with mfw_v4lsrc.
This is essential for embedded applications that are not happy with
the default VGA@30.

This makes constructs like the following functional on devices like
i.MX6 with MIPI cameras:

Camera { viewfinder { resolution: "320x240"; maximumFrameRate: 15 } }

Change-Id: Ia297afdb5ca51c6e55ad45dce37fdab7da3a5cfb
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Migrate to categorized logging in Quick 2 video output

Enable qt.multimedia.video to get the logs. Also enhance the printing
when creating the video node implementation. It is essential to have
an easy way to figure out what handle and formats the node in use
supports.

Change-Id: Idf3a9f076ba03b5e613c19f2347204c841850b45
Reviewed-by: Andy Nichols <andy.nichols@theqtcompany.com>

Support byte ordered QImage formats in pixelFormatFromImageFormat

For QVideoFrame purposes they are equivalent.

Change-Id: I776c60aa8ca848e58499bbd0c1fc25c457d46ef6
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

AVFImageCaptureControl - invalid connection

AVCaptureConnection from AVCaptureStillImageOutput becomes invalid
as we remove/add AVCaptureDevice.

Change-Id: I698ffcc0b91b76cd5d7c25e4b244eaa0aa459159
Task-number: QTBUG-42035
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Add missing includes for QDataStream/QIODevice.

After qtbase/90e7cc172a7521396bb2d49720ee4ceb9a9390b3,
QStringList no longer includes QDataStream.

Change-Id: Ibe3e1e6542e1b592adaabe3f8ffd3268efaf289b
Reviewed-by: Simon Hausmann <simon.hausmann@digia.com>

Support YUV420P in the i.MX6 video node

Camera input is often in this format. Until now the lack of GL_VIV_I420 (which
was presumably missing in older versions of the extension?) in the format list
resulted in falling back to the built-in i420 node instead of the zero-copy imx6
one. This is now corrected by adding the correct format mapping.

Change-Id: I6e891bb3bb07d64ccd5b2d170b052f677c8bd19c
Reviewed-by: aavit <eirik.aavitsland@theqtcompany.com>

Merge "Merge remote-tracking branch 'origin/5.4' into dev" into refs/staging/dev

Fix some typos in strings.

s/Endianess/Endianness/
s/changable/changeable/

Change-Id: I91a43ff6e6143f2d3fc0a93aa8bbf34a415eea90
Reviewed-by: Andrew Knight <qt@panimo.net>

Fix: static linking on Linux with both PulseAudio and Alsa plugins

Fixed multiply defined symbols when linking statically with both
PulseAudio and Alsa plugins enabled:
The private classes In/OutputPrivate had identical names and have been
renamed.

Change-Id: I9415beeeed9fb0e14ead3f0ab906f343b3934341
Task-number: QTBUG-43514
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

remove unnecessary LICENSE.GPLv2

Change-Id: Ic2be97ac71f2dbf48925b2ee7fb4ab291c7573c7
Reviewed-by: Iikka Eklund <iikka.eklund@theqtcompany.com>

Merge remote-tracking branch 'origin/5.4' into dev

Conflicts:
.qmake.conf

Change-Id: I31e377cdccf8bf5c1ea8143faf2001ac99608c27

Merge remote-tracking branch 'origin/5.4.0' into 5.4

Change-Id: Ice62a75ba6ff094e22e8affbecf26f4d3bf2f282

Bump version

Change-Id: I7e93575a6e3767485e2a5430312e87527b2c9b2d

winrt: Add missing QAbstractVideoSurface::stop() call.

This was preventing the surface from restarting with a different format.

Change-Id: I1f86ddb1b16618f167183c7e2fcb32658df578f3
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>

winrt: Fix encoding properties

These should match the capture mode. Additionally, there was a semantic
error preventing the encoding properties from being properly selected.
This fixes a bug in which the viewfinder was receiving frames too large
for display as an OpenGL texture.

Task-number: QTBUG-41065
Change-Id: Ia82c8f44bba1692a219edc5f9d78fc76c3d8a4ba
Reviewed-by: Maurice Kalinowski <maurice.kalinowski@theqtcompany.com>

winrt: Fix camera auto rotation

There is no Windows Runtime API to find the camera sensor rotation, so
assume that phones always have a camera mounting of 270 degrees. Tablet
and webcams remain mounted at the default (0 degrees). As the frame is not
flipped automatically by the system, the scan line direction is set to
BottomToTop for front-facing cameras to achieve compatibility with
other platforms.

Task-number: QTBUG-41066
Change-Id: Icf17ecd4aca9fa9d5b24d94e5b21b63ee6f21f28
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Make it compile with no-opengl

Change-Id: I71358bb1268e5b28b66b1817a3ec0cd98459cfd2
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@theqtcompany.com>
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Remove private API use from video orientation handler

The QPA header isn't needed anymore, as nativeOrientation was added as
a QScreen property in 5.2.

Change-Id: I7cd00feae769175fd0c4be65b503e74ee910814a
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

GStreamer: better camera device name logic.

Use the device ID for QCameraInfo::description() when the driver
doesn't provide any display name.

Change-Id: Iff1f17187ecb52262412f85db04d7108fae71717
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

Disable warning about QObject::event being hidden

Found by Clang 3.6:
qdeclarativemediametadata_p.h:292:14: warning: 'QDeclarativeMediaMetaData::event' hides overloaded virtual function [-Woverloaded-virtual]
qobject.h:116:18: note: hidden overloaded virtual function 'QObject::event' declared here: different number of parameters (1 vs 0)

Change-Id: I4324c984649738c9625cc3eb9dddea6e2abf46a9
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Added 5.4.0 change file.

Change-Id: I623b42d5f4f565ee7cf2d064e52609a99636bd6a
Reviewed-by: Jani Heikkinen <jani.heikkinen@theqtcompany.com>

OpenSL ES: volume support for QAudioInput.

The OpenSL volume interface is not available for audio inputs on
Android so we apply the volume ourselves on the PCM data.

Task-number: QTBUG-42159
Change-Id: If43d8aa576bc70a925681f0db1ca8b40e71f7b29
Reviewed-by: Christian Stromme <christian.stromme@theqtcompany.com>

Fix VideoOutput autoOrientation when switching cameras.

The VideoOutput's camera info was not updated when switching cameras.

Change-Id: I23537ce98b08009898eaa26ef14d5b9a746ab5f7
Reviewed-by: Andrew Knight <andrew.knight@theqtcompany.com>

Add additional exposure modes to QCameraExposure.

[ChangeLog][GStreamer][Android] Camera exposure mode extended to support
Action, Landscape, NightPortrait, Theatre, Sunset, SteadyPhoto,
Fireworks, Party, Candlelight, and Barcode modes.

Change-Id: I13d4bb042d27c0bd2ffcd369882b56bbabc84335
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Add a color filter property to QCameraImageProcessing.

[ChangeLog] New color filter property for QCameraImageProcessing.

Change-Id: I999e349e3e4f284b533fa62ba50903fbd21cb400
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Add support for face detection focus point mode to camerabin backend.

[ChangeLog][GStreamer] Implemented the face detection focus point mode
in the gstreamer camerabin backend.

Change-Id: Ia582d2fb5e74d5b438aa0038224c5e20e597d53e
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Implement exposure and whitebalance lock for gstreamer camera.

Change-Id: I58277d69c18ad2e31cad719a2dd6361c0c2d7e98
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Allow supported camera locks to change after initialization.

A camera backend may not be able to report which locks it supports
until after it is loaded, so query support on demand instead of caching
the value available at construction time.

Change-Id: I56fb1adee980ebc2fa893da3c983a6dce26329c0
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

GStreamer: port to 1.0.

0.10 is still used by default.
To enable GStreamer 1.0, pass GST_VERSION=1.0 to qmake
for qtmultimedia.pro.

Contributions from:
Andrew den Exter <andrew.den.exter@qinetic.com.au>
Ilya Smelykh <ilya@videoexpertsgroup.com>
Jim Hodapp <jim.hodapp@canonical.com>
Sergio Schvezov <sergio.schvezov@canonical.com>

Change-Id: I72a46d1170a8794a149bdb5e20767afcc5b7587c
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

Merge remote-tracking branch 'origin/5.4' into dev

Change-Id: Iaa608643f6626ed074a9fd374555cc5bc84659d5

Remove unused private members

One is not used, the others are not even initialized, so don't use the
memory.

qsoundeffect_pulse_p.h:172:20: warning: private field 'm_resourceStatus' is not used [-Wunused-private-field]
qvideowidget_p.h:211:25: warning: private field 'm_aspectRatioMode' is not used [-Wunused-private-field]
qalsaaudioinput.h:156:22: warning: private field 'timestamp' is not used [-Wunused-private-field]
qalsaaudiooutput.h:135:22: warning: private field 'timestamp' is not used [-Wunused-private-field]

Change-Id: I7c9f50d57c4d29ee0dfd7dc086771d721cdb5b05
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Fix Clang warning about comparison of different signs

Commit 4d35f66acf90e64e6c174bee9d809713d07fcd7e changed from -1 to ~0 because
ICC complained, but Clang still sees ~0 as int. So force to unsigned.

qgstappsrc.cpp:144:31: warning: comparison of integers of different signs: 'unsigned int' and 'int' [-Wsign-compare]

Change-Id: I6b0fdf8dc5df157d8e184f22dba44660e60ca3b2
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Merge remote-tracking branch 'origin/5.4' into dev

Change-Id: Id87e56ccfc9f33f98c3d06991f6fe9c14d38fbac

Merge remote-tracking branch 'origin/5.4.0' into 5.4

Change-Id: Iec2c793710c95919975aa3c03144d915ca5fa84f

Fix bogus videonode plugin handling

Each plugin must provide its own unique key. Otherwise we will only ever
see one single plugin.

Right now running on i.MX6 is often broken because the imx6 videonode plugin is
not picked up since only the egl one is seen by the system. With the fix both plugins
provide their own unique key so both become visible.

Additionally, introduce a QT_VIDEONODE environment variable. This is useful to specify
which plugin to use. This is necessary in case multiple custom videonode plugins support
the same formats.

Change-Id: Iaa1988f8436dcb938cb9a95e2e0d68a4e92e113c
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

WinRT: Fix compilation after ANGLE update

Header inclusion is not needed, hence remove it for WinRT.

Change-Id: I8117439849143975cad3dc14e36118b8da4621de
Reviewed-by: Oliver Wolff <oliver.wolff@theqtcompany.com>

Check whether current context can be obtained when deleting textures.

Add a warning in that case.

Task-number: QTBUG-41966
Change-Id: I491ee9e13c9504040ab789951656983a736d9203
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

OpenSL ES: improve buffer logic

Don't use relaxed load and stores, we need to be stricter to avoid
problems with high frequency re-fills of the buffer. If we don't enforce
ordering we might end-up spending more time trying to acquire an open
slot in the buffer. Updating processes bytes is also moved off the
"OpenSL" thread.

Added some comments for improved readability.

Change-Id: Ie27965fc6bf4b8394081ae6419f4933522ada98e
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

OpenSL ES: Don't store or return the adjusted volume level.

According to our own docs we should always return 1.0 (MAX) volume level
if the device doesn't support setting the volume, which is the case
for OpenSL ES on Android.

Task-number: QTBUG-42159
Change-Id: I9144e9e2cd84cc80633c68c5d6fa32b8dbd0fcd5
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Doc: Added the missing screenshot image

Change-Id: Ifcef698bd735b7fe7e5f4a92984be07a01f283fb
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>

WMF plugin: Initialize member variable m_stateDirty.

Fix purify warning:
[W] UMR: Uninitialized memory read in MFPlayerControl::refreshState(void) {1 occurrence}

Task-number: QTBUG-41966
Change-Id: I1416f906dcc8c31a528ab7f09a258873fcfe9d1e
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Add QT_GSTREAMER_CAMERABIN_VIDEOSRC environment variable.

It can be used to set which video source element should be used by
the camerabin.

Change-Id: I8d1cd8c4ba6fe5a89817699f645b0997e713aaca
Reviewed-by: Samuli Piippo <samuli.piippo@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

Merge remote-tracking branch 'origin/5.4' into dev

Change-Id: I82a85963aa1cc6e0a2cf7a49c039c117948cbeab

Doc: Updated the \brief statements

Most of them were unnecessarily long.

Change-Id: I8942254c2211adb268e399056435e6acc940616f
Reviewed-by: Leena Miettinen <riitta-leena.miettinen@digia.com>

Merge remote-tracking branch 'origin/5.4' into dev

Change-Id: Ie44084828edf50050c695ac4dcc1cb532651499c

Android: Use the new findClass() method.

Avoid local caching.

Change-Id: I1e30896da664c5a45c38c09412c16cb8ff70c5c7
Reviewed-by: Yoann Lopes <yoann.lopes@theqtcompany.com>

Merge remote-tracking branch 'origin/5.3' into 5.4

Change-Id: I716fd3acb69e424047691069cd4a781f656d0487

Merge remote-tracking branch 'origin/5.4' into dev

Change-Id: I8b9177d90afac8b834d333efc6c22b6b35dceaf8

GStreamer: fix QMediaRecorder::duration() when recording with a camera

To get the recording duration, we were using the camerabin's position,
which represents the time since it was started, not the time it's been
recording to a file.
We now retrieve the camerabin's filesink position.

Change-Id: I68eeb25d1718666288655d22deea23e25de73b90
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

AVFoundation: fix media player video rendering in QML.

The AVPlayerLayer was set on the QVideoRendererControl before its
geometry was updated, causing the renderer control to display frames
with an invalid size.

Change-Id: I90e18dce69d4b48a3d7932d44a7eab4fd443f1fb
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

QNX: Fix resetting video surface

If video surface object is set to 0, it must not be accessed to set a
property on it.

Task-number: QTBUG-40746
Change-Id: I1de0e5495918d3ea06706412fab15bf1af012f36
Reviewed-by: Fabian Bumberger <fbumberger@rim.com>

WMF: Use media source only when it is initialized.

Change-Id: I0efcf6139d0b81194cf25383025f080f8656728c
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

WMF: Fix null ptr derefernce in MFPlayerSession.

Checking the sender of the mediaSourceReady signal to prevent accessing
the incorrect source resolver.

When the source resolver has finished the asynchronous operation and
the source resolver gets recreated in the player at the same time in a
different thread the signal mediaSourceReady still gets emitted from the
old source resolver.

The player assumes that the signal was emitted from the current source
resolver and accesses the unresolved media source in the
handleMediaSourceReady slot.

Task-number: QTBUG-39980
Change-Id: Ic52f6918995aac250048d91f89c520cfea111bd0
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

AVFoundation: fix build with iOS 8.0 SDK.

Change-Id: I9d9b97ad88631ba12a289f7575ca53386e592bd1
Reviewed-by: Jake Petroules <jake.petroules@petroules.com>

Updated snapshots for qmlvideo example documentation

Task-number: QTBUG-36287
Change-Id: I9da63560ba92a572d6d3943cfdade0b609469ace
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Merge "Merge remote-tracking branch 'origin/5.3' into 5.4" into refs/staging/5.4

Merge remote-tracking branch 'origin/5.3' into 5.4

Conflicts:
.qmake.conf

Change-Id: Iad73368a22c6d4662188e6f357a265d0c26756d0

GStreamer: fix artist-related metadata keys.

QMediaMetaData::AlbumArtist now maps to GST_TAG_ALBUM_ARTIST and
QMediaMetaData::ContributingArtist to GST_TAG_ARTIST.

Change-Id: Ifa2cb90ee8ae09beaee572ad113c05776e699432
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

GStreamer: fix QMediaPlayer metadata signals.

- metaDataAvailableChanged was never emitted
- metaDataChanged was not emitted when clearing the current media

Change-Id: Ide05056450171a87aeb018be7e0bdea136341946
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

Add metadata test for qmediaplayerbackend auto-test.

Change-Id: I419496293b11b6a941af08e9709595458b7ca423
Reviewed-by: Andrew den Exter <andrew.den.exter@qinetic.com.au>

Android: fix some problems with the media player.

- Correctly emit positionChanged signal. One of the problems with
  this was that QMediaPlayer automatically sends periodic
  position updates while playing a media. There's no need to have
  the same logic in the backend.
- Seeking after reaching the end of the media now correctly works

Auto tests included.

Change-Id: I6d5ecbae6e05f94a8aac1a0834cf57427adf219b
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

Improve audiorecorder example.

- Show actual recording location
- Update control buttons depending on the recorder state instead of
  the status
- Create audio levels using the actual audio format from the audio
  buffers. The format from the QMediaRecorder might not always contain
  the value actually used.

Task-number: QTBUG-36154
Change-Id: I418b4472b0d984f47efb1a1813da6ef440ba9a40
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

Use QCameraInfo in camera example.

To replace QCamera::availableDevices(), which is deprecated since 5.3.

Change-Id: I0b1bd6286ec78d6d26ce309d224369989d4a5063
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

QMLVideo Example visual update

Task-number: QTBUG-36287
Change-Id: I797a995c2ccd6f6fec40fbf50f93e297ae15a9b1
Reviewed-by: Topi Reiniö <topi.reinio@digia.com>

Remove QuickTime backend.

The backend was kept only for Mac OS X 10.6 support. AVFoundation is
used in 10.7 and later. Following the 10.6 deprecation plan, the code
is now being removed for Qt 5.4.

Change-Id: I513d00adda35f6012dda548b8d824d158efffb16
Reviewed-by: Andy Nichols <andy.nichols@digia.com>
Reviewed-by: Tor Arne Vestbø <tor.arne.vestbo@digia.com>

Android: fix QMediaPlayer's state and mediaStatus signals.

Emit signals only after both properties are written to avoid having
incoherent values in signal handlers.

Task-number: QTBUG-40314
Change-Id: I6c8445e61cccf1a9803647329c4fa1f0e452f56d
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

WMF: fix crash on media player destruction.

A race condition could cause a frame to be presented even after the
QAbstractVideoSurface was deleted. We now check that the surface is
valid before presenting a frame.

Task-number: QTBUG-41158
Change-Id: If593469a8267583e499e781336af38d3fbf318fd
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

WMF: fix video rendering with ANGLE.

The format of the offscreen surface used for video rendering should be
compatible with the EGL config.

Change-Id: Ic016245ce80c2483771e620c3eed345262d03c44
Reviewed-by: Laszlo Agocs <laszlo.agocs@digia.com>

Make the multimedia examples less verbose

Important warnings such as missing services are still printed though.

Task-number: QTBUG-31080
Change-Id: I96fd3837c4edc58c61b97bf950b7cab05ceed014
Reviewed-by: Friedemann Kleint <Friedemann.Kleint@digia.com>
Reviewed-by: Christian Stromme <christian.stromme@digia.com>

Remove QtSystemInfo dependency from Multimedia examples

QtSystemInfo is not officially supported in Qt5 and its QML API is
currently broken. Inhibition of the screensaver is not essential
for the example anyway.

Task-number: QTBUG-31080
Change-Id: Ia2e7d8de3e2044e11e1681907e61a7207489ad1b
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

Revert "QMediaNetworkPlaylistProvider: Upon error parsing, stop parsing."

This reverts commit 0ed18d846c0b425b0c50a2fefd7cc0fc148832c2.
The same patch was submitted in both 5.3 and 5.4 branches. It should
have been pushed only to 5.3.

Change-Id: I9e2974886190dfb2e5def5bc325c58f6e7783f55
Reviewed-by: Robin Burchell <robin.burchell@viroteck.net>

implement QVideoProbe for iOS camera

This commit allows to use QVideoProbe for QCamera on iOS.
The logic for the implementation is taken from the Android plugin.

[ChangeLog][Platform Specific Changes][iOS]
QVideoProbe support is implemented for QCamera on iOS

Change-Id: I1db50defa8518287c4f1f3cc6602881702a95849
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

Ensure pre-roll frames are displayed when gstreamer backend is paused.

Perform a seek before transitioning from the stopped state to paused or
playing to force the pipeline to resupply the video sink with any
pre-roll buffer it may have previously ignored during loading.  And
don't assume showPrerollFrames to be true if the current state is not
stopped as the policy handling may have prevented an effectual state
change.

Change-Id: I288a70bc4da32f3534eab4b14702ca8f8fdb4222
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

OpenSL ES: Be less rigid about tearing down the output device.

We where very strict about tearing down the audio device. While this is
a good strategy to avoid unnecessary resource usage, it also causes
excessive re-allocations, e.g., when transiting from start to stop and
back again. This can increase latency, especially in case where a short
clip is re-played at a high frequency.
This change also decrease the chance of the player ending up in some
unknown state where it drops audio clips without any warning.

Task-number: QTBUG-40864
Change-Id: I1afad4af0622983f0f0c221d91cf794585d8cad2
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

Fixed avfmediaplayersession.mm for OSX 10.10 Yosemite.

Implicit cast caused build to fail. Explicit cast builds fine.

Task-number: QTBUG-41136
Change-Id: I0147c26a0f8b8198d6ed9944311547b81a50bccb
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>

Remove unused includes

Change-Id: Ibbce6e9135649d5dce0522320197dbbd0a92b3b9
Reviewed-by: Yoann Lopes <yoann.lopes@digia.com>