Al Viro [Fri, 30 Aug 2019 03:13:30 +0000 (23:13 -0400)]
configfs_register_group() shouldn't be (and isn't) called in rmdirable parts
commit
f19e4ed1e1edbfa3c9ccb9fed17759b7d6db24c6 upstream.
revert
cc57c07343bd "configfs: fix registered group removal"
It was an attempt to handle something that fundamentally doesn't
work - configfs_register_group() should never be done in a part
of tree that can be rmdir'ed. And in mainline it never had been,
so let's not borrow trouble; the fix was racy anyway, it would take
a lot more to make that work and desired semantics is not clear.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Fri, 30 Aug 2019 15:30:03 +0000 (11:30 -0400)]
configfs: stash the data we need into configfs_buffer at open time
commit
ff4dd081977da56566a848f071aed8fa92d604a1 upstream.
simplifies the ->read()/->write()/->release() instances nicely
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Wed, 23 Oct 2019 08:27:05 +0000 (10:27 +0200)]
can: peak_usb: fix slab info leak
commit
f7a1337f0d29b98733c8824e165fca3371d7d4fd upstream.
Fix a small slab info leak due to a failure to clear the command buffer
at allocation.
The first 16 bytes of the command buffer are always sent to the device
in pcan_usb_send_cmd() even though only the first two may have been
initialised in case no argument payload is provided (e.g. when waiting
for a response).
Fixes:
bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core")
Cc: stable <stable@vger.kernel.org> # 3.4
Reported-by: syzbot+863724e7128e14b26732@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 1 Oct 2019 10:29:13 +0000 (12:29 +0200)]
can: mcba_usb: fix use-after-free on disconnect
commit
4d6636498c41891d0482a914dd570343a838ad79 upstream.
The driver was accessing its driver data after having freed it.
Fixes:
51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer")
Cc: stable <stable@vger.kernel.org> # 4.12
Cc: Remigiusz Kołłątaj <remigiusz.kollataj@mobica.com>
Reported-by: syzbot+e29b17e5042bbc56fae9@syzkaller.appspotmail.com
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wen Yang [Sat, 28 Sep 2019 14:29:05 +0000 (22:29 +0800)]
can: dev: add missing of_node_put() after calling of_get_child_by_name()
commit
db9ee384f6f71f7c5296ce85b7c1a2a2527e7c72 upstream.
of_node_put() needs to be called when the device node which is got
from of_get_child_by_name() finished using.
Fixes:
2290aefa2e90 ("can: dev: Add support for limiting configured bitrate")
Cc: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Navid Emamdoost [Fri, 20 Sep 2019 02:44:38 +0000 (21:44 -0500)]
can: gs_usb: gs_can_open(): prevent memory leak
commit
fb5be6a7b4863ecc44963bb80ca614584b6c7817 upstream.
In gs_can_open() if usb_submit_urb() fails the allocated urb should be
released.
Fixes:
d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Kleine-Budde [Wed, 9 Oct 2019 13:48:48 +0000 (15:48 +0200)]
can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak
commit
ca913f1ac024559ebc17f0b599af262f0ad997c9 upstream.
If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will
not queue the skb and return with an error.
None of the callers of this function, issue a kfree_skb() to free the
not queued skb. This results in a memory leak.
This patch fixes the problem by freeing the skb in case of a full queue.
The return value is adjusted to -ENOBUFS to better reflect the actual
problem.
The device stats handling is left to the callers, as this function might
be used in both the rx and tx path.
Fixes:
55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions")
Cc: linux-stable <stable@vger.kernel.org>
Cc: Martin Hundebøll <martin@geanix.com>
Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stephane Grosjean [Tue, 8 Oct 2019 08:35:44 +0000 (10:35 +0200)]
can: peak_usb: fix a potential out-of-sync while decoding packets
commit
de280f403f2996679e2607384980703710576fed upstream.
When decoding a buffer received from PCAN-USB, the first timestamp read in
a packet is a 16-bit coded time base, and the next ones are an 8-bit
offset to this base, regardless of the type of packet read.
This patch corrects a potential loss of synchronization by using a
timestamp index read from the buffer, rather than an index of received
data packets, to determine on the sizeof the timestamp to be read from the
packet being decoded.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Fixes:
46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kurt Van Dijck [Tue, 1 Oct 2019 07:40:36 +0000 (09:40 +0200)]
can: c_can: c_can_poll(): only read status register after status IRQ
commit
3cb3eaac52c0f145d895f4b6c22834d5f02b8569 upstream.
When the status register is read without the status IRQ pending, the
chip may not raise the interrupt line for an upcoming status interrupt
and the driver may miss a status interrupt.
It is critical that the BUSOFF status interrupt is forwarded to the
higher layers, since no more interrupts will follow without
intervention.
Thanks to Wolfgang and Joe for bringing up the first idea.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Cc: Joe Burmeister <joe.burmeister@devtank.co.uk>
Fixes:
fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Joakim Zhang [Thu, 15 Aug 2019 08:00:26 +0000 (08:00 +0000)]
can: flexcan: disable completely the ECC mechanism
commit
5e269324db5adb2f5f6ec9a93a9c7b0672932b47 upstream.
The ECC (memory error detection and correction) mechanism can be
activated or not, controlled by the ECCDIS bit in CAN_MECR. When
disabled, updates on indications and reporting registers are stopped.
So if want to disable ECC completely, had better assert ECCDIS bit, not
just mask the related interrupts.
Fixes:
cdce844865be ("can: flexcan: add vf610 support for FlexCAN")
Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan Hovold [Tue, 1 Oct 2019 10:29:14 +0000 (12:29 +0200)]
can: usb_8dev: fix use-after-free on disconnect
commit
3759739426186a924675651b388d1c3963c5710e upstream.
The driver was accessing its driver data after having freed it.
Fixes:
0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Cc: stable <stable@vger.kernel.org> # 3.9
Cc: Bernd Krumboeck <b.krumboeck@gmail.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Wed, 6 Nov 2019 21:58:15 +0000 (13:58 -0800)]
SMB3: Fix persistent handles reconnect
commit
d243af7ab9feb49f11f2c0050d2077e2d9556f9b upstream.
When the client hits a network reconnect, it re-opens every open
file with a create context to reconnect a persistent handle. All
create context types should be 8-bytes aligned but the padding
was missed for that one. As a result, some servers don't allow
us to reconnect handles and return an error. The problem occurs
when the problematic context is not at the end of the create
request packet. Fix this by adding a proper padding at the end
of the reconnect persistent handle context.
Cc: Stable <stable@vger.kernel.org> # 4.19.x
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Beulich [Tue, 29 Oct 2019 09:34:19 +0000 (10:34 +0100)]
x86/apic/32: Avoid bogus LDR warnings
commit
fe6f85ca121e9c74e7490fe66b0c5aae38e332c3 upstream.
The removal of the LDR initialization in the bigsmp_32 APIC code unearthed
a problem in setup_local_APIC().
The code checks unconditionally for a mismatch of the logical APIC id by
comparing the early APIC id which was initialized in get_smp_config() with
the actual LDR value in the APIC.
Due to the removal of the bogus LDR initialization the check now can
trigger on bigsmp_32 APIC systems emitting a warning for every booting
CPU. This is of course a false positive because the APIC is not using
logical destination mode.
Restrict the check and the possibly resulting fixup to systems which are
actually using the APIC in logical destination mode.
[ tglx: Massaged changelog and added Cc stable ]
Fixes:
bae3a8d3308 ("x86/apic: Do not initialize LDR and DFR for bigsmp")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/666d8f91-b5a8-1afd-7add-821e72a35f03@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Mon, 28 Oct 2019 07:06:51 +0000 (09:06 +0200)]
intel_th: pci: Add Jasper Lake PCH support
commit
9d55499d8da49e9261e95a490f3fda41d955f505 upstream.
This adds support for Intel TH on Jasper Lake PCH.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191028070651.9770-8-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Mon, 28 Oct 2019 07:06:50 +0000 (09:06 +0200)]
intel_th: pci: Add Comet Lake PCH support
commit
3adbb5718dd5264666ddbc2b9b43799d292e9cb6 upstream.
This adds support for Intel TH on Comet Lake PCH.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191028070651.9770-7-alexander.shishkin@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Sat, 24 Aug 2019 14:49:55 +0000 (17:49 +0300)]
netfilter: ipset: Fix an error code in ip_set_sockfn_get()
commit
30b7244d79651460ff114ba8f7987ed94c86b99a upstream.
The copy_to_user() function returns the number of bytes remaining to be
copied. In this code, that positive return is checked at the end of the
function and we return zero/success. What we should do instead is
return -EFAULT.
Fixes:
a7b4f989a629 ("netfilter: ipset: IP set core support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lukas Wunner [Thu, 31 Oct 2019 10:06:24 +0000 (11:06 +0100)]
netfilter: nf_tables: Align nft_expr private data to 64-bit
commit
250367c59e6ba0d79d702a059712d66edacd4a1a upstream.
Invoking the following commands on a 32-bit architecture with strict
alignment requirements (such as an ARMv7-based Raspberry Pi) results
in an alignment exception:
# nft add table ip test-ip4
# nft add chain ip test-ip4 output { type filter hook output priority 0; }
# nft add rule ip test-ip4 output quota 1025 bytes
Alignment trap: not handling instruction
e1b26f9f at [<
7f4473f8>]
Unhandled fault: alignment exception (0x001) at 0xb832e824
Internal error: : 1 [#1] PREEMPT SMP ARM
Hardware name: BCM2835
[<
7f4473fc>] (nft_quota_do_init [nft_quota])
[<
7f447448>] (nft_quota_init [nft_quota])
[<
7f4260d0>] (nf_tables_newrule [nf_tables])
[<
7f4168dc>] (nfnetlink_rcv_batch [nfnetlink])
[<
7f416bd0>] (nfnetlink_rcv [nfnetlink])
[<
8078b334>] (netlink_unicast)
[<
8078b664>] (netlink_sendmsg)
[<
8071b47c>] (sock_sendmsg)
[<
8071bd18>] (___sys_sendmsg)
[<
8071ce3c>] (__sys_sendmsg)
[<
8071ce94>] (sys_sendmsg)
The reason is that nft_quota_do_init() calls atomic64_set() on an
atomic64_t which is only aligned to 32-bit, not 64-bit, because it
succeeds struct nft_expr in memory which only contains a 32-bit pointer.
Fix by aligning the nft_expr private data to 64-bit.
Fixes:
96518518cc41 ("netfilter: add nftables")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ondrej Jirman [Mon, 28 Oct 2019 21:49:14 +0000 (22:49 +0100)]
ARM: sunxi: Fix CPU powerdown on A83T
commit
e690053e97e7a9c968df9a97cef9089dfa8e6a44 upstream.
PRCM_PWROFF_GATING_REG has CPU0 at bit 4 on A83T. So without this
patch, instead of gating the CPU0, the whole cluster was power gated,
when shutting down first CPU in the cluster.
Fixes:
6961275e72a8c1 ("ARM: sun8i: smp: Add support for A83T")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Cc: stable@vger.kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andreas Klinger [Sun, 6 Oct 2019 14:29:56 +0000 (16:29 +0200)]
iio: srf04: fix wrong limitation in distance measuring
commit
431f7667bd6889a274913162dfd19cce9d84848e upstream.
The measured time value in the driver is limited to the maximum distance
which can be read by the sensor. This limitation was wrong and is fixed
by this patch.
It also takes into account that we are supporting a variety of sensors
today and that the recently added sensors have a higher maximum
distance range.
Changes in v2:
- Added a Tested-by
Suggested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Tested-by: Zbyněk Kocur <zbynek.kocur@fel.cvut.cz>
Signed-off-by: Andreas Klinger <ak@it-klinger.de>
Cc:<Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexandru Ardelean [Tue, 8 Oct 2019 14:15:37 +0000 (17:15 +0300)]
iio: imu: adis16480: make sure provided frequency is positive
commit
24e1eb5c0d78cfb9750b690bbe997d4d59170258 upstream.
It could happen that either `val` or `val2` [provided from userspace] is
negative. In that case the computed frequency could get a weird value.
Fix this by checking that neither of the 2 variables is negative, and check
that the computed result is not-zero.
Fixes:
e4f959390178 ("iio: imu: adis16480 switch sampling frequency attr to core support")
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fabrice Gasnier [Fri, 25 Oct 2019 15:04:20 +0000 (17:04 +0200)]
iio: adc: stm32-adc: fix stopping dma
commit
e6afcf6c598d6f3a0c9c408bfeddb3f5730608b0 upstream.
There maybe a race when using dmaengine_terminate_all(). The predisable
routine may call iio_triggered_buffer_predisable() prior to a pending DMA
callback.
Adopt dmaengine_terminate_sync() to ensure there's no pending DMA request
before calling iio_triggered_buffer_predisable().
Fixes:
2763ea0585c9 ("iio: adc: stm32: add optional dma support")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Tue, 29 Oct 2019 13:53:29 +0000 (13:53 +0000)]
ceph: add missing check in d_revalidate snapdir handling
commit
1f08529c84cfecaf1261ed9b7e17fab18541c58f upstream.
We should not play with dcache without parent locked...
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Luis Henriques [Fri, 25 Oct 2019 13:05:24 +0000 (14:05 +0100)]
ceph: fix use-after-free in __ceph_remove_cap()
commit
ea60ed6fcf29eebc78f2ce91491e6309ee005a01 upstream.
KASAN reports a use-after-free when running xfstest generic/531, with the
following trace:
[ 293.903362] kasan_report+0xe/0x20
[ 293.903365] rb_erase+0x1f/0x790
[ 293.903370] __ceph_remove_cap+0x201/0x370
[ 293.903375] __ceph_remove_caps+0x4b/0x70
[ 293.903380] ceph_evict_inode+0x4e/0x360
[ 293.903386] evict+0x169/0x290
[ 293.903390] __dentry_kill+0x16f/0x250
[ 293.903394] dput+0x1c6/0x440
[ 293.903398] __fput+0x184/0x330
[ 293.903404] task_work_run+0xb9/0xe0
[ 293.903410] exit_to_usermode_loop+0xd3/0xe0
[ 293.903413] do_syscall_64+0x1a0/0x1c0
[ 293.903417] entry_SYSCALL_64_after_hwframe+0x44/0xa9
This happens because __ceph_remove_cap() may queue a cap release
(__ceph_queue_cap_release) which can be scheduled before that cap is
removed from the inode list with
rb_erase(&cap->ci_node, &ci->i_caps);
And, when this finally happens, the use-after-free will occur.
This can be fixed by removing the cap from the inode list before being
removed from the session list, and thus eliminating the risk of an UAF.
Cc: stable@vger.kernel.org
Signed-off-by: Luis Henriques <lhenriques@suse.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Catalin Marinas [Wed, 6 Nov 2019 15:41:05 +0000 (15:41 +0000)]
arm64: Do not mask out PTE_RDONLY in pte_same()
commit
6767df245f4736d0cf0c6fb7cf9cf94b27414245 upstream.
Following commit
73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out
of set_pte_at()"), the PTE_RDONLY bit is no longer managed by
set_pte_at() but built into the PAGE_* attribute definitions.
Consequently, pte_same() must include this bit when checking two PTEs
for equality.
Remove the arm64-specific pte_same() function, practically reverting
commit
747a70e60b72 ("arm64: Fix copy-on-write referencing in HugeTLB")
Fixes:
73e86cb03cf2 ("arm64: Move PTE_RDONLY bit handling out of set_pte_at()")
Cc: <stable@vger.kernel.org> # 4.14.x-
Cc: Will Deacon <will@kernel.org>
Cc: Steve Capper <steve.capper@arm.com>
Reported-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bard Liao [Thu, 29 Aug 2019 18:11:35 +0000 (02:11 +0800)]
soundwire: bus: set initial value to port_status
commit
f1fac63af678b2fc1044ca71fedf1f2ae8bf7c3b upstream.
port_status[port_num] are assigned for each port_num in some if
conditions. So some of the port_status may not be initialized.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20190829181135.16049-1-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Suchanek [Thu, 3 Oct 2019 10:13:54 +0000 (12:13 +0200)]
soundwire: depend on ACPI
commit
52eb063d153ac310058fbaa91577a72c0e7a7169 upstream.
The device cannot be probed on !ACPI and gives this warning:
drivers/soundwire/slave.c:16:12: warning: ‘sdw_slave_add’ defined but
not used [-Wunused-function]
static int sdw_slave_add(struct sdw_bus *bus,
^~~~~~~~~~~~~
Cc: stable@vger.kernel.org
Fixes:
7c3cd189b86d ("soundwire: Add Master registration")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Link: https://lore.kernel.org/r/bd685232ea511251eeb9554172f1524eabf9a46e.1570097621.git.msuchanek@suse.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gerecke [Wed, 6 Nov 2019 19:59:46 +0000 (11:59 -0800)]
HID: wacom: generic: Treat serial number and related fields as unsigned
commit
ff479731c3859609530416a18ddb3db5db019b66 upstream.
The HID descriptors for most Wacom devices oddly declare the serial
number and other related fields as signed integers. When these numbers
are ingested by the HID subsystem, they are automatically sign-extended
into 32-bit integers. We treat the fields as unsigned elsewhere in the
kernel and userspace, however, so this sign-extension causes problems.
In particular, the sign-extended tool ID sent to userspace as ABS_MISC
does not properly match unsigned IDs used by xf86-input-wacom and libwacom.
We introduce a function 'wacom_s32tou' that can undo the automatic sign
extension performed by 'hid_snto32'. We call this function when processing
the serial number and related fields to ensure that we are dealing with
and reporting the unsigned form. We opt to use this method rather than
adding a descriptor fixup in 'wacom_hid_usage_quirk' since it should be
more robust in the face of future devices.
Ref: https://github.com/linuxwacom/input-wacom/issues/134
Fixes:
f85c9dc678 ("HID: wacom: generic: Support tool ID and additional tool types")
CC: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Wed, 30 Oct 2019 14:21:28 +0000 (10:21 -0400)]
drm/radeon: fix si_enable_smc_cac() failed issue
commit
2c409ba81be25516afe05ae27a4a15da01740b01 upstream.
Need to set the dte flag on this asic.
Port the fix from amdgpu:
5cb818b861be114 ("drm/amd/amdgpu: fix si_enable_smc_cac() failed issue")
Reviewed-by: Yong Zhao <yong.zhao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiri Olsa [Mon, 4 Nov 2019 23:27:11 +0000 (00:27 +0100)]
perf tools: Fix time sorting
commit
722ddfde366fd46205456a9c5ff9b3359dc9a75e upstream.
The final sort might get confused when the comparison is done over
bigger numbers than int like for -s time.
Check the following report for longer workloads:
$ perf report -s time -F time,overhead --stdio
Fix hist_entry__sort() to properly return int64_t and not possible cut
int.
Fixes:
043ca389a318 ("perf tools: Use hpp formats to sort final output")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org # v3.16+
Link: http://lore.kernel.org/lkml/20191104232711.16055-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shuah Khan [Fri, 27 Sep 2019 01:16:41 +0000 (19:16 -0600)]
tools: gpio: Use !building_out_of_srctree to determine srctree
commit
4a6a6f5c4aeedb72db871d60bfcca89835f317aa upstream.
make TARGETS=gpio kselftest fails with:
Makefile:23: tools/build/Makefile.include: No such file or directory
When the gpio tool make is invoked from tools Makefile, srctree is
cleared and the current logic check for srctree equals to empty
string to determine srctree location from CURDIR.
When the build in invoked from selftests/gpio Makefile, the srctree
is set to "." and the same logic used for srctree equals to empty is
needed to determine srctree.
Check building_out_of_srctree undefined as the condition for both
cases to fix "make TARGETS=gpio kselftest" build failure.
Cc: stable@vger.kernel.org
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin Hao [Wed, 6 Nov 2019 05:16:57 +0000 (21:16 -0800)]
dump_stack: avoid the livelock of the dump_lock
commit
5cbf2fff3bba8d3c6a4d47c1754de1cf57e2b01f upstream.
In the current code, we use the atomic_cmpxchg() to serialize the output
of the dump_stack(), but this implementation suffers the thundering herd
problem. We have observed such kind of livelock on a Marvell cn96xx
board(24 cpus) when heavily using the dump_stack() in a kprobe handler.
Actually we can let the competitors to wait for the releasing of the
lock before jumping to atomic_cmpxchg(). This will definitely mitigate
the thundering herd problem. Thanks Linus for the suggestion.
[akpm@linux-foundation.org: fix comment]
Link: http://lkml.kernel.org/r/20191030031637.6025-1-haokexin@gmail.com
Fixes:
b58d977432c8 ("dump_stack: serialize the output from dump_stack()")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Wed, 6 Nov 2019 05:16:40 +0000 (21:16 -0800)]
mm, vmstat: hide /proc/pagetypeinfo from normal users
commit
abaed0112c1db08be15a784a2c5c8a8b3063cdd3 upstream.
/proc/pagetypeinfo is a debugging tool to examine internal page
allocator state wrt to fragmentation. It is not very useful for any
other use so normal users really do not need to read this file.
Waiman Long has noticed that reading this file can have negative side
effects because zone->lock is necessary for gathering data and that a)
interferes with the page allocator and its users and b) can lead to hard
lockups on large machines which have very long free_list.
Reduce both issues by simply not exporting the file to regular users.
Link: http://lkml.kernel.org/r/20191025072610.18526-2-mhocko@kernel.org
Fixes:
467c996c1e19 ("Print out statistics in relation to fragmentation avoidance to /proc/pagetypeinfo")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Waiman Long <longman@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Waiman Long <longman@redhat.com>
Acked-by: Rafael Aquini <aquini@redhat.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <guro@fb.com>
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Jann Horn <jannh@google.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yang Shi [Wed, 6 Nov 2019 05:16:30 +0000 (21:16 -0800)]
mm: thp: handle page cache THP correctly in PageTransCompoundMap
commit
169226f7e0d275c1879551f37484ef6683579a5c upstream.
We have a usecase to use tmpfs as QEMU memory backend and we would like
to take the advantage of THP as well. But, our test shows the EPT is
not PMD mapped even though the underlying THP are PMD mapped on host.
The number showed by /sys/kernel/debug/kvm/largepage is much less than
the number of PMD mapped shmem pages as the below:
7f2778200000-
7f2878200000 rw-s
00000000 00:14 262232 /dev/shm/qemu_back_mem.mem.Hz2hSf (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 579584 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
12
And some benchmarks do worse than with anonymous THPs.
By digging into the code we figured out that commit
127393fbe597 ("mm:
thp: kvm: fix memory corruption in KVM with THP enabled") checks if
there is a single PTE mapping on the page for anonymous THP when setting
up EPT map. But the _mapcount < 0 check doesn't work for page cache THP
since every subpage of page cache THP would get _mapcount inc'ed once it
is PMD mapped, so PageTransCompoundMap() always returns false for page
cache THP. This would prevent KVM from setting up PMD mapped EPT entry.
So we need handle page cache THP correctly. However, when page cache
THP's PMD gets split, kernel just remove the map instead of setting up
PTE map like what anonymous THP does. Before KVM calls get_user_pages()
the subpages may get PTE mapped even though it is still a THP since the
page cache THP may be mapped by other processes at the mean time.
Checking its _mapcount and whether the THP has PTE mapped or not.
Although this may report some false negative cases (PTE mapped by other
processes), it looks not trivial to make this accurate.
With this fix /sys/kernel/debug/kvm/largepage would show reasonable
pages are PMD mapped by EPT as the below:
7fbeaee00000-
7fbfaee00000 rw-s
00000000 00:14 275464 /dev/shm/qemu_back_mem.mem.SKUvat (deleted)
Size: 4194304 kB
[snip]
AnonHugePages: 0 kB
ShmemPmdMapped: 557056 kB
[snip]
Locked: 0 kB
cat /sys/kernel/debug/kvm/largepages
271
And the benchmarks are as same as anonymous THPs.
[yang.shi@linux.alibaba.com: v4]
Link: http://lkml.kernel.org/r/1571865575-42913-1-git-send-email-yang.shi@linux.alibaba.com
Link: http://lkml.kernel.org/r/1571769577-89735-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
dd78fedde4b9 ("rmap: support file thp")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Gang Deng <gavin.dg@linux.alibaba.com>
Tested-by: Gang Deng <gavin.dg@linux.alibaba.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mel Gorman [Wed, 6 Nov 2019 05:16:27 +0000 (21:16 -0800)]
mm, meminit: recalculate pcpu batch and high limits after init completes
commit
3e8fc0075e24338b1117cdff6a79477427b8dbed upstream.
Deferred memory initialisation updates zone->managed_pages during the
initialisation phase but before that finishes, the per-cpu page
allocator (pcpu) calculates the number of pages allocated/freed in
batches as well as the maximum number of pages allowed on a per-cpu
list. As zone->managed_pages is not up to date yet, the pcpu
initialisation calculates inappropriately low batch and high values.
This increases zone lock contention quite severely in some cases with
the degree of severity depending on how many CPUs share a local zone and
the size of the zone. A private report indicated that kernel build
times were excessive with extremely high system CPU usage. A perf
profile indicated that a large chunk of time was lost on zone->lock
contention.
This patch recalculates the pcpu batch and high values after deferred
initialisation completes for every populated zone in the system. It was
tested on a 2-socket AMD EPYC 2 machine using a kernel compilation
workload -- allmodconfig and all available CPUs.
mmtests configuration: config-workload-kernbench-max Configuration was
modified to build on a fresh XFS partition.
kernbench
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Amean user-256 13249.50 ( 0.00%) 16401.31 * -23.79%*
Amean syst-256 14760.30 ( 0.00%) 4448.39 * 69.86%*
Amean elsp-256 162.42 ( 0.00%) 119.13 * 26.65%*
Stddev user-256 42.97 ( 0.00%) 19.15 ( 55.43%)
Stddev syst-256 336.87 ( 0.00%) 6.71 ( 98.01%)
Stddev elsp-256 2.46 ( 0.00%) 0.39 ( 84.03%)
5.4.0-rc3 5.4.0-rc3
vanilla resetpcpu-v2
Duration User 39766.24 49221.79
Duration System 44298.10 13361.67
Duration Elapsed 519.11 388.87
The patch reduces system CPU usage by 69.86% and total build time by
26.65%. The variance of system CPU usage is also much reduced.
Before, this was the breakdown of batch and high values over all zones
was:
256 batch: 1
256 batch: 63
512 batch: 7
256 high: 0
256 high: 378
512 high: 42
512 pcpu pagesets had a batch limit of 7 and a high limit of 42. After
the patch:
256 batch: 1
768 batch: 63
256 high: 0
768 high: 378
[mgorman@techsingularity.net: fix merge/linkage snafu]
Link: http://lkml.kernel.org/r/20191023084705.GD3016@techsingularity.netLink:
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org> [4.1+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johannes Weiner [Wed, 6 Nov 2019 05:17:13 +0000 (21:17 -0800)]
mm: memcontrol: fix network errors from failing __GFP_ATOMIC charges
commit
869712fd3de5a90b7ba23ae1272278cddc66b37b upstream.
While upgrading from 4.16 to 5.2, we noticed these allocation errors in
the log of the new kernel:
SLUB: Unable to allocate memory on node -1, gfp=0xa20(GFP_ATOMIC)
cache: tw_sock_TCPv6(960:helper-logs), object size: 232, buffer size: 240, default order: 1, min order: 0
node 0: slabs: 5, objs: 170, free: 0
slab_out_of_memory+1
___slab_alloc+969
__slab_alloc+14
kmem_cache_alloc+346
inet_twsk_alloc+60
tcp_time_wait+46
tcp_fin+206
tcp_data_queue+2034
tcp_rcv_state_process+784
tcp_v6_do_rcv+405
__release_sock+118
tcp_close+385
inet_release+46
__sock_release+55
sock_close+17
__fput+170
task_work_run+127
exit_to_usermode_loop+191
do_syscall_64+212
entry_SYSCALL_64_after_hwframe+68
accompanied by an increase in machines going completely radio silent
under memory pressure.
One thing that changed since 4.16 is
e699e2c6a654 ("net, mm: account
sock objects to kmemcg"), which made these slab caches subject to cgroup
memory accounting and control.
The problem with that is that cgroups, unlike the page allocator, do not
maintain dedicated atomic reserves. As a cgroup's usage hovers at its
limit, atomic allocations - such as done during network rx - can fail
consistently for extended periods of time. The kernel is not able to
operate under these conditions.
We don't want to revert the culprit patch, because it indeed tracks a
potentially substantial amount of memory used by a cgroup.
We also don't want to implement dedicated atomic reserves for cgroups.
There is no point in keeping a fixed margin of unused bytes in the
cgroup's memory budget to accomodate a consumer that is impossible to
predict - we'd be wasting memory and get into configuration headaches,
not unlike what we have going with min_free_kbytes. We do this for
physical mem because we have to, but cgroups are an accounting game.
Instead, account these privileged allocations to the cgroup, but let
them bypass the configured limit if they have to. This way, we get the
benefits of accounting the consumed memory and have it exert pressure on
the rest of the cgroup, but like with the page allocator, we shift the
burden of reclaimining on behalf of atomic allocations onto the regular
allocations that can block.
Link: http://lkml.kernel.org/r/20191022233708.365764-1-hannes@cmpxchg.org
Fixes:
e699e2c6a654 ("net, mm: account sock objects to kmemcg")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Suleiman Souhlal <suleiman@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org> [4.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Tue, 5 Nov 2019 13:43:16 +0000 (14:43 +0100)]
ALSA: hda/ca0132 - Fix possible workqueue stall
commit
15c2b3cc09a31620914955cb2a89c277c18ee999 upstream.
The unsolicited event handler for the headphone jack on CA0132 codec
driver tries to reschedule the another delayed work with
cancel_delayed_work_sync(). It's no good idea, unfortunately,
especially after we changed the work queue to the standard global
one; this may lead to a stall because both works are using the same
global queue.
Fix it by dropping the _sync but does call cancel_delayed_work()
instead.
Fixes:
993884f6a26c ("ALSA: hda/ca0132 - Delay HP amp turnon.")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1155836
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191105134316.19294-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Sakamoto [Sat, 2 Nov 2019 15:09:20 +0000 (00:09 +0900)]
ALSA: bebob: fix to detect configured source of sampling clock for Focusrite Saffire Pro i/o series
commit
706ad6746a66546daf96d4e4a95e46faf6cf689a upstream.
For Focusrite Saffire Pro i/o, the lowest 8 bits of register represents
configured source of sampling clock. The next lowest 8 bits represents
whether the configured source is actually detected or not just after
the register is changed for the source.
Current implementation evaluates whole the register to detect configured
source. This results in failure due to the next lowest 8 bits when the
source is connected in advance.
This commit fixes the bug.
Fixes:
25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Cc: <stable@vger.kernel.org> # v3.16+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191102150920.20367-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 6 Nov 2019 16:55:47 +0000 (17:55 +0100)]
ALSA: timer: Fix incorrectly assigned timer instance
commit
e7af6307a8a54f0b873960b32b6a644f2d0fbd97 upstream.
The clean up commit
41672c0c24a6 ("ALSA: timer: Simplify error path in
snd_timer_open()") unified the error handling code paths with the
standard goto, but it introduced a subtle bug: the timer instance is
stored in snd_timer_open() incorrectly even if it returns an error.
This may eventually lead to UAF, as spotted by fuzzer.
The culprit is the snd_timer_open() code checks the
SNDRV_TIMER_IFLG_EXCLUSIVE flag with the common variable timeri.
This variable is supposed to be the newly created instance, but we
(ab-)used it for a temporary check before the actual creation of a
timer instance. After that point, there is another check for the max
number of instances, and it bails out if over the threshold. Before
the refactoring above, it worked fine because the code returned
directly from that point. After the refactoring, however, it jumps to
the unified error path that stores the timeri variable in return --
even if it returns an error. Unfortunately this stored value is kept
in the caller side (snd_timer_user_tselect()) in tu->timeri. This
causes inconsistency later, as if the timer was successfully
assigned.
In this patch, we fix it by not re-using timeri variable but a
temporary variable for testing the exclusive connection, so timeri
remains NULL at that point.
Fixes:
41672c0c24a6 ("ALSA: timer: Simplify error path in snd_timer_open()")
Reported-and-tested-by: Tristan Madani <tristmd@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191106165547.23518-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Salil Mehta [Thu, 7 Nov 2019 17:09:53 +0000 (17:09 +0000)]
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
[ Upstream commit
bf5a6b4c474c589244dc25ee1af2c3c829228ef8 ]
This patch fixes the problem of the spin locks, originally
meant for the netpoll path of hns driver, causing deadlock in
the normal NAPI poll path. The issue happened due to the presence
of the stray leftover spin lock code related to the netpoll,
whose support was earlier removed from the HNS[1], got activated
due to enabling of NET_POLL_CONTROLLER switch.
Earlier background:
The netpoll handling code originally had this bug(as identified
by Marc Zyngier[2]) of wrong spin lock API being used which did
not disable the interrupts and hence could cause locking issues.
i.e. if the lock were first acquired in context to thread like
'ip' util and this lock if ever got later acquired again in
context to the interrupt context like TX/RX (Interrupts could
always pre-empt the lock holding task and acquire the lock again)
and hence could cause deadlock.
Proposed Solution:
1. If the netpoll was enabled in the HNS driver, which is not
right now, we could have simply used spin_[un]lock_irqsave()
2. But as netpoll is disabled, therefore, it is best to get rid
of the existing locks and stray code for now. This should
solve the problem reported by Marc.
[1] https://git.kernel.org/torvalds/c/
4bd2c03be7
[2] https://patchwork.ozlabs.org/patch/1189139/
Fixes:
4bd2c03be707 ("net: hns: remove ndo_poll_controller")
Cc: lipeng <lipeng321@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: David S. Miller <davem@davemloft.net>
Reported-by: Marc Zyngier <maz@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 7 Nov 2019 17:26:19 +0000 (09:26 -0800)]
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
[ Upstream commit
1bef4c223b8588cf50433bdc2c6953d82949b3b3 ]
While looking at a syzbot KCSAN report [1], I found multiple
issues in this code :
1) fib6_nh->last_probe has an initial value of 0.
While probably okay on 64bit kernels, this causes an issue
on 32bit kernels since the time_after(jiffies, 0 + interval)
might be false ~24 days after boot (for HZ=1000)
2) The data-race found by KCSAN
I could use READ_ONCE() and WRITE_ONCE(), but we also can
take the opportunity of not piling-up too many rt6_probe_deferred()
works by using instead cmpxchg() so that only one cpu wins the race.
[1]
BUG: KCSAN: data-race in find_match / find_match
write to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 1:
rt6_probe net/ipv6/route.c:663 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x5bd/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
tcp_xmit_probe_skb+0x19b/0x1d0 net/ipv4/tcp_output.c:3735
read to 0xffff8880bb7aabe8 of 8 bytes by interrupt on cpu 0:
rt6_probe net/ipv6/route.c:657 [inline]
find_match net/ipv6/route.c:757 [inline]
find_match+0x521/0x790 net/ipv6/route.c:733
__find_rr_leaf+0xe3/0x780 net/ipv6/route.c:831
find_rr_leaf net/ipv6/route.c:852 [inline]
rt6_select net/ipv6/route.c:896 [inline]
fib6_table_lookup+0x383/0x650 net/ipv6/route.c:2164
ip6_pol_route+0xee/0x5c0 net/ipv6/route.c:2200
ip6_pol_route_output+0x48/0x60 net/ipv6/route.c:2452
fib6_rule_lookup+0x3d6/0x470 net/ipv6/fib6_rules.c:117
ip6_route_output_flags_noref+0x16b/0x230 net/ipv6/route.c:2484
ip6_route_output_flags+0x50/0x1a0 net/ipv6/route.c:2497
ip6_dst_lookup_tail+0x25d/0xc30 net/ipv6/ip6_output.c:1049
ip6_dst_lookup_flow+0x68/0x120 net/ipv6/ip6_output.c:1150
inet6_csk_route_socket+0x2f7/0x420 net/ipv6/inet6_connection_sock.c:106
inet6_csk_xmit+0x91/0x1f0 net/ipv6/inet6_connection_sock.c:121
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 18894 Comm: udevd Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
cc3a86c802f0 ("ipv6: Change rt6_probe to take a fib6_nh")
Fixes:
f547fac624be ("ipv6: rate-limit probes for neighbourless routes")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Manoil [Tue, 5 Nov 2019 21:50:14 +0000 (23:50 +0200)]
net: mscc: ocelot: fix NULL pointer on LAG slave removal
[ Upstream commit
3b3eed8eec47259939ee6c3d58aea1c311ddee3b ]
lag_upper_info may be NULL on slave removal.
Fixes:
dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Claudiu Manoil [Tue, 5 Nov 2019 21:50:13 +0000 (23:50 +0200)]
net: mscc: ocelot: don't handle netdev events for other netdevs
[ Upstream commit
7afb3e575e5aa9f5a200a3eb3f45d8130f6d6601 ]
The check that the event is actually for this device should be moved
from the "port" handler to the net device handler.
Otherwise the port handler will deny bonding configuration for other
net devices in the same system (like enetc in the LS1028A) that don't
have the lag_upper_info->tx_type restriction that ocelot has.
Fixes:
dc96ee3730fc ("net: mscc: ocelot: add bonding support")
Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Manish Chopra [Fri, 8 Nov 2019 10:42:30 +0000 (02:42 -0800)]
qede: fix NULL pointer deref in __qede_remove()
[ Upstream commit
deabc87111c690097c03765ea017cd500f7376fc ]
While rebooting the system with SR-IOV vfs enabled leads
to below crash due to recurrence of __qede_remove() on the VF
devices (first from .shutdown() flow of the VF itself and
another from PF's .shutdown() flow executing pci_disable_sriov())
This patch adds a safeguard in __qede_remove() flow to fix this,
so that driver doesn't attempt to remove "already removed" devices.
[ 194.360134] BUG: unable to handle kernel NULL pointer dereference at
00000000000008dc
[ 194.360227] IP: [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.360304] PGD 0
[ 194.360325] Oops: 0000 [#1] SMP
[ 194.360360] Modules linked in: tcp_lp fuse tun bridge stp llc devlink bonding ip_set nfnetlink ib_isert iscsi_target_mod ib_srpt target_core_mod ib_srp scsi_transport_srp scsi_tgt ib_ipoib ib_umad rpcrdma sunrpc rdma_ucm ib_uverbs ib_iser rdma_cm iw_cm ib_cm libiscsi scsi_transport_iscsi dell_smbios iTCO_wdt iTCO_vendor_support dell_wmi_descriptor dcdbas vfat fat pcc_cpufreq skx_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd qedr ib_core pcspkr ses enclosure joydev ipmi_ssif sg i2c_i801 lpc_ich mei_me mei wmi ipmi_si ipmi_devintf ipmi_msghandler tpm_crb acpi_pad acpi_power_meter xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_pclmul crct10dif_common crc32c_intel mgag200
[ 194.361044] qede i2c_algo_bit drm_kms_helper qed syscopyarea sysfillrect nvme sysimgblt fb_sys_fops ttm nvme_core mpt3sas crc8 ptp drm pps_core ahci raid_class scsi_transport_sas libahci libata drm_panel_orientation_quirks nfit libnvdimm dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ip_tables]
[ 194.361297] CPU: 51 PID: 7996 Comm: reboot Kdump: loaded Not tainted 3.10.0-1062.el7.x86_64 #1
[ 194.361359] Hardware name: Dell Inc. PowerEdge MX840c/0740HW, BIOS 2.4.6 10/15/2019
[ 194.361412] task:
ffff9cea9b360000 ti:
ffff9ceabebdc000 task.ti:
ffff9ceabebdc000
[ 194.361463] RIP: 0010:[<
ffffffffc03553c4>] [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.361534] RSP: 0018:
ffff9ceabebdfac0 EFLAGS:
00010282
[ 194.361570] RAX:
0000000000000000 RBX:
ffff9cd013846098 RCX:
0000000000000000
[ 194.361621] RDX:
0000000000000000 RSI:
0000000000000000 RDI:
ffff9cd013846098
[ 194.361668] RBP:
ffff9ceabebdfae8 R08:
0000000000000000 R09:
0000000000000000
[ 194.361715] R10:
00000000bfe14201 R11:
ffff9ceabfe141e0 R12:
0000000000000000
[ 194.361762] R13:
ffff9cd013846098 R14:
0000000000000000 R15:
ffff9ceab5e48000
[ 194.361810] FS:
00007f799c02d880(0000) GS:
ffff9ceacb0c0000(0000) knlGS:
0000000000000000
[ 194.361865] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 194.361903] CR2:
00000000000008dc CR3:
0000001bdac76000 CR4:
00000000007607e0
[ 194.361953] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 194.362002] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 194.362051] PKRU:
55555554
[ 194.362073] Call Trace:
[ 194.362109] [<
ffffffffc0355500>] qede_remove+0x10/0x20 [qede]
[ 194.362180] [<
ffffffffb97d0f3e>] pci_device_remove+0x3e/0xc0
[ 194.362240] [<
ffffffffb98b3c52>] __device_release_driver+0x82/0xf0
[ 194.362285] [<
ffffffffb98b3ce3>] device_release_driver+0x23/0x30
[ 194.362343] [<
ffffffffb97c86d4>] pci_stop_bus_device+0x84/0xa0
[ 194.362388] [<
ffffffffb97c87e2>] pci_stop_and_remove_bus_device+0x12/0x20
[ 194.362450] [<
ffffffffb97f153f>] pci_iov_remove_virtfn+0xaf/0x160
[ 194.362496] [<
ffffffffb97f1aec>] sriov_disable+0x3c/0xf0
[ 194.362534] [<
ffffffffb97f1bc3>] pci_disable_sriov+0x23/0x30
[ 194.362599] [<
ffffffffc02f83c3>] qed_sriov_disable+0x5e3/0x650 [qed]
[ 194.362658] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362709] [<
ffffffffc02cc0c0>] ? qed_free_stream_mem+0x70/0x90 [qed]
[ 194.362754] [<
ffffffffb9622df6>] ? kfree+0x106/0x140
[ 194.362803] [<
ffffffffc02cd659>] qed_slowpath_stop+0x1a9/0x1d0 [qed]
[ 194.362854] [<
ffffffffc035544e>] __qede_remove+0xae/0x130 [qede]
[ 194.362904] [<
ffffffffc03554e0>] qede_shutdown+0x10/0x20 [qede]
[ 194.362956] [<
ffffffffb97cf90a>] pci_device_shutdown+0x3a/0x60
[ 194.363010] [<
ffffffffb98b180b>] device_shutdown+0xfb/0x1f0
[ 194.363066] [<
ffffffffb94b66c6>] kernel_restart_prepare+0x36/0x40
[ 194.363107] [<
ffffffffb94b66e2>] kernel_restart+0x12/0x60
[ 194.363146] [<
ffffffffb94b6959>] SYSC_reboot+0x229/0x260
[ 194.363196] [<
ffffffffb95f200d>] ? handle_mm_fault+0x39d/0x9b0
[ 194.363253] [<
ffffffffb942b621>] ? __switch_to+0x151/0x580
[ 194.363304] [<
ffffffffb9b7ec28>] ? __schedule+0x448/0x9c0
[ 194.363343] [<
ffffffffb94b69fe>] SyS_reboot+0xe/0x10
[ 194.363387] [<
ffffffffb9b8bede>] system_call_fastpath+0x25/0x2a
[ 194.363430] Code: f9 e9 37 ff ff ff 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 55 4c 8d af 98 00 00 00 41 54 4c 89 ef 41 89 f4 53 e8 4c e4 55 f9 <80> b8 dc 08 00 00 01 48 89 c3 4c 8d b8 c0 08 00 00 4c 8b b0 c0
[ 194.363712] RIP [<
ffffffffc03553c4>] __qede_remove+0x24/0x130 [qede]
[ 194.363764] RSP <
ffff9ceabebdfac0>
[ 194.363791] CR2:
00000000000008dc
Signed-off-by: Manish Chopra <manishc@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Sudarsana Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Thu, 7 Nov 2019 01:33:20 +0000 (09:33 +0800)]
NFC: st21nfca: fix double free
[ Upstream commit
99a8efbb6e30b72ac98cecf81103f847abffb1e5 ]
The variable nfcid_skb is not changed in the callee nfc_hci_get_param()
if error occurs. Consequently, the freed variable nfcid_skb will be
freed again, resulting in a double free bug. Set nfcid_skb to NULL after
releasing it to fix the bug.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Thu, 7 Nov 2019 06:29:50 +0000 (14:29 +0800)]
nfc: netlink: fix double device reference drop
[ Upstream commit
025ec40b81d785a98f76b8bdb509ac10773b4f12 ]
The function nfc_put_device(dev) is called twice to drop the reference
to dev when there is no associated local llcp. Remove one of them to fix
the bug.
Fixes:
52feb444a903 ("NFC: Extend netlink interface for LTO, RW, and MIUX parameters support")
Fixes:
d9b8d8e19b07 ("NFC: llcp: Service Name Lookup netlink interface")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pan Bian [Tue, 5 Nov 2019 08:34:07 +0000 (16:34 +0800)]
NFC: fdp: fix incorrect free object
[ Upstream commit
517ce4e93368938b204451285e53014549804868 ]
The address of fw_vsc_cfg is on stack. Releasing it with devm_kfree() is
incorrect, which may result in a system crash or other security impacts.
The expected object to free is *fw_vsc_cfg.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksander Morgado [Thu, 7 Nov 2019 10:57:01 +0000 (11:57 +0100)]
net: usb: qmi_wwan: add support for DW5821e with eSIM support
[ Upstream commit
e497df686e8fed8c1dd69179010656362858edb3 ]
Exactly same layout as the default DW5821e module, just a different
vid/pid.
The QMI interface is exposed in USB configuration #1:
P: Vendor=413c ProdID=81e0 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5821e-eSIM Snapdragon X20 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sean Tranchetti [Tue, 5 Nov 2019 00:54:22 +0000 (17:54 -0700)]
net: qualcomm: rmnet: Fix potential UAF when unregistering
[ Upstream commit
e7a86c687e64ab24f88330ad24ecc9442ce40c5a ]
During the exit/unregistration process of the RmNet driver, the function
rmnet_unregister_real_device() is called to handle freeing the driver's
internal state and removing the RX handler on the underlying physical
device. However, the order of operations this function performs is wrong
and can lead to a use after free of the rmnet_port structure.
Before calling netdev_rx_handler_unregister(), this port structure is
freed with kfree(). If packets are received on any RmNet devices before
synchronize_net() completes, they will attempt to use this already-freed
port structure when processing the packet. As such, before cleaning up any
other internal state, the RX handler must be unregistered in order to
guarantee that no further packets will arrive on the device.
Fixes:
ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation")
Signed-off-by: Sean Tranchetti <stranche@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 8 Nov 2019 04:08:19 +0000 (20:08 -0800)]
net: fix data-race in neigh_event_send()
[ Upstream commit
1b53d64435d56902fc234ff2507142d971a09687 ]
KCSAN reported the following data-race [1]
The fix will also prevent the compiler from optimizing out
the condition.
[1]
BUG: KCSAN: data-race in neigh_resolve_output / neigh_resolve_output
write to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 1:
neigh_event_send include/net/neighbour.h:443 [inline]
neigh_resolve_output+0x78/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
tcp_write_timer+0xd1/0xf0 net/ipv4/tcp_timer.c:618
read to 0xffff8880a41dba78 of 8 bytes by interrupt on cpu 0:
neigh_event_send include/net/neighbour.h:442 [inline]
neigh_resolve_output+0x57/0x480 net/core/neighbour.c:1474
neigh_output include/net/neighbour.h:511 [inline]
ip_finish_output2+0x4af/0xe40 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:308 [inline]
__ip_finish_output+0x23a/0x490 net/ipv4/ip_output.c:290
ip_finish_output+0x41/0x160 net/ipv4/ip_output.c:318
NF_HOOK_COND include/linux/netfilter.h:294 [inline]
ip_output+0xdf/0x210 net/ipv4/ip_output.c:432
dst_output include/net/dst.h:436 [inline]
ip_local_out+0x74/0x90 net/ipv4/ip_output.c:125
__ip_queue_xmit+0x3a8/0xa40 net/ipv4/ip_output.c:532
ip_queue_xmit+0x45/0x60 include/net/ip.h:237
__tcp_transmit_skb+0xe81/0x1d60 net/ipv4/tcp_output.c:1169
tcp_transmit_skb net/ipv4/tcp_output.c:1185 [inline]
__tcp_retransmit_skb+0x4bd/0x15f0 net/ipv4/tcp_output.c:2976
tcp_retransmit_skb+0x36/0x1a0 net/ipv4/tcp_output.c:2999
tcp_retransmit_timer+0x719/0x16d0 net/ipv4/tcp_timer.c:515
tcp_write_timer_handler+0x42d/0x510 net/ipv4/tcp_timer.c:598
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Sverdlin [Fri, 8 Nov 2019 10:00:44 +0000 (10:00 +0000)]
net: ethernet: octeon_mgmt: Account for second possible VLAN header
[ Upstream commit
e4dd5608033efe7b6030cde359bfdbaeb73bc22d ]
Octeon's input ring-buffer entry has 14 bits-wide size field, so to account
for second possible VLAN header max_mtu must be further reduced.
Fixes:
109cc16526c6d ("ethernet/cavium: use core min/max MTU checking")
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
David Ahern [Thu, 7 Nov 2019 18:29:52 +0000 (18:29 +0000)]
ipv4: Fix table id reference in fib_sync_down_addr
[ Upstream commit
e0a312629fefa943534fc46f7bfbe6de3fdaf463 ]
Hendrik reported routes in the main table using source address are not
removed when the address is removed. The problem is that fib_sync_down_addr
does not account for devices in the default VRF which are associated
with the main table. Fix by updating the table id reference.
Fixes:
5a56a0b3a45d ("net: Don't delete routes in different VRFs")
Reported-by: Hendrik Donner <hd@os-cillation.de>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 7 Nov 2019 08:48:01 +0000 (09:48 +0100)]
CDC-NCM: handle incomplete transfer of MTU
[ Upstream commit
332f989a3b0041b810836c5c3747e59aad7e9d0b ]
A malicious device may give half an answer when asked
for its MTU. The driver will proceed after this with
a garbage MTU. Anything but a complete answer must be treated
as an error.
V2: used sizeof as request by Alexander
Reported-and-tested-by: syzbot+0631d878823ce2411636@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jay Vosburgh [Sat, 2 Nov 2019 04:56:42 +0000 (21:56 -0700)]
bonding: fix state transition issue in link monitoring
[ Upstream commit
1899bb325149e481de31a4f32b59ea6f24e176ea ]
Since
de77ecd4ef02 ("bonding: improve link-status update in
mii-monitoring"), the bonding driver has utilized two separate variables
to indicate the next link state a particular slave should transition to.
Each is used to communicate to a different portion of the link state
change commit logic; one to the bond_miimon_commit function itself, and
another to the state transition logic.
Unfortunately, the two variables can become unsynchronized,
resulting in incorrect link state transitions within bonding. This can
cause slaves to become stuck in an incorrect link state until a
subsequent carrier state transition.
The issue occurs when a special case in bond_slave_netdev_event
sets slave->link directly to BOND_LINK_FAIL. On the next pass through
bond_miimon_inspect after the slave goes carrier up, the BOND_LINK_FAIL
case will set the proposed next state (link_new_state) to BOND_LINK_UP,
but the new_link to BOND_LINK_DOWN. The setting of the final link state
from new_link comes after that from link_new_state, and so the slave
will end up incorrectly in _DOWN state.
Resolve this by combining the two variables into one.
Reported-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Reported-by: Sha Zhang <zhangsha.zhang@huawei.com>
Cc: Mahesh Bandewar <maheshb@google.com>
Fixes:
de77ecd4ef02 ("bonding: improve link-status update in mii-monitoring")
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 10 Nov 2019 10:27:57 +0000 (11:27 +0100)]
Linux 4.19.83
Roger Quadros [Thu, 22 Aug 2019 13:40:28 +0000 (16:40 +0300)]
usb: gadget: udc: core: Fix segfault if udc_bind_to_driver() for pending driver fails
commit
163be6ff7739b12ff300d77897d340f661821da2 upstream.
If a gadget driver is in the pending drivers list, a UDC
becomes available and udc_bind_to_driver() fails, then it
gets deleted from the pending list.
i.e. list_del(&driver->pending) in check_pending_gadget_drivers().
Then if that gadget driver is unregistered,
usb_gadget_unregister_driver() does a list_del(&driver->pending)
again thus causing a page fault as that list entry has been poisoned
by the previous list_del().
Fix this by using list_del_init() instead of list_del() in
check_pending_gadget_drivers().
Test case:
- Make sure no UDC is available
- modprobe g_mass_storage file=wrongfile
- Load UDC driver so it becomes available
lun0: unable to open backing file: wrongfile
- modprobe -r g_mass_storage
[ 60.900431] Unable to handle kernel paging request at virtual address
dead000000000108
[ 60.908346] Mem abort info:
[ 60.911145] ESR = 0x96000044
[ 60.914227] Exception class = DABT (current EL), IL = 32 bits
[ 60.920162] SET = 0, FnV = 0
[ 60.923217] EA = 0, S1PTW = 0
[ 60.926354] Data abort info:
[ 60.929228] ISV = 0, ISS = 0x00000044
[ 60.933058] CM = 0, WnR = 1
[ 60.936011] [
dead000000000108] address between user and kernel address ranges
[ 60.943136] Internal error: Oops:
96000044 [#1] PREEMPT SMP
[ 60.948691] Modules linked in: g_mass_storage(-) usb_f_mass_storage libcomposite xhci_plat_hcd xhci_hcd usbcore ti_am335x_adc kfifo_buf omap_rng cdns3 rng_core udc_core crc32_ce xfrm_user crct10dif_ce snd_so6
[ 60.993995] Process modprobe (pid: 834, stack limit = 0x00000000c2aebc69)
[ 61.000765] CPU: 0 PID: 834 Comm: modprobe Not tainted 4.19.59-01963-g065f42a60499 #92
[ 61.008658] Hardware name: Texas Instruments SoC (DT)
[ 61.014472] pstate:
60000005 (nZCv daif -PAN -UAO)
[ 61.019253] pc : usb_gadget_unregister_driver+0x7c/0x108 [udc_core]
[ 61.025503] lr : usb_gadget_unregister_driver+0x30/0x108 [udc_core]
[ 61.031750] sp :
ffff00001338fda0
[ 61.035049] x29:
ffff00001338fda0 x28:
ffff800846d40000
[ 61.040346] x27:
0000000000000000 x26:
0000000000000000
[ 61.045642] x25:
0000000056000000 x24:
0000000000000800
[ 61.050938] x23:
ffff000008d7b0d0 x22:
ffff0000088b07c8
[ 61.056234] x21:
ffff000001100000 x20:
ffff000002020260
[ 61.061530] x19:
ffff0000010ffd28 x18:
0000000000000000
[ 61.066825] x17:
0000000000000000 x16:
0000000000000000
[ 61.072121] x15:
0000000000000000 x14:
0000000000000000
[ 61.077417] x13:
ffff000000000000 x12:
ffffffffffffffff
[ 61.082712] x11:
0000000000000030 x10:
7f7f7f7f7f7f7f7f
[ 61.088008] x9 :
fefefefefefefeff x8 :
0000000000000000
[ 61.093304] x7 :
ffffffffffffffff x6 :
000000000000ffff
[ 61.098599] x5 :
8080000000000000 x4 :
0000000000000000
[ 61.103895] x3 :
ffff000001100020 x2 :
ffff800846d40000
[ 61.109190] x1 :
dead000000000100 x0 :
dead000000000200
[ 61.114486] Call trace:
[ 61.116922] usb_gadget_unregister_driver+0x7c/0x108 [udc_core]
[ 61.122828] usb_composite_unregister+0x10/0x18 [libcomposite]
[ 61.128643] msg_cleanup+0x18/0xfce0 [g_mass_storage]
[ 61.133682] __arm64_sys_delete_module+0x17c/0x1f0
[ 61.138458] el0_svc_common+0x90/0x158
[ 61.142192] el0_svc_handler+0x2c/0x80
[ 61.145926] el0_svc+0x8/0xc
[ 61.148794] Code:
eb03003f d10be033 54ffff21 a94d0281 (
f9000420)
[ 61.154869] ---[ end trace
afb22e9b637bd9a7 ]---
Segmentation fault
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suman Anna [Thu, 8 Aug 2019 14:39:28 +0000 (09:39 -0500)]
arm64: dts: ti: k3-am65-main: Fix gic-its node unit-address
commit
389ce1a7c5279ebfb682fab220b4021b2bd49c8b upstream.
The gic-its node unit-address has an additional zero compared
to the actual reg value. Fix it.
Fixes:
ea47eed33a3f ("arm64: dts: ti: Add Support for AM654 SoC")
Reported-by: Robert Tivy <rtivy@ti.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Ujfalusi [Thu, 19 Sep 2019 07:16:52 +0000 (10:16 +0300)]
ASoC: pcm3168a: The codec does not support S32_LE
commit
7b2db65b59c30d58c129d3c8b2101feca686155a upstream.
24 bits is supported in all modes and 16 bit only when the codec is slave
and the DAI is set to RIGHT_J.
Remove the unsupported sample format.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190919071652.31724-1-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Desnes A. Nunes do Rosario [Thu, 3 Oct 2019 21:10:10 +0000 (18:10 -0300)]
selftests/powerpc: Fix compile error on tlbie_test due to newer gcc
commit
5b216ea1c40cf06eead15054c70e238c9bd4729e upstream.
Newer versions of GCC (>= 9) demand that the size of the string to be
copied must be explicitly smaller than the size of the destination.
Thus, the NULL char has to be taken into account on strncpy.
This will avoid the following compiling error:
tlbie_test.c: In function 'main':
tlbie_test.c:639:4: error: 'strncpy' specified bound 100 equals destination size
strncpy(logdir, optarg, LOGDIR_NAME_SIZE);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Desnes A. Nunes do Rosario <desnesn@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191003211010.9711-1-desnesn@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aneesh Kumar K.V [Tue, 24 Sep 2019 03:52:54 +0000 (09:22 +0530)]
selftests/powerpc: Add test case for tlbie vs mtpidr ordering issue
commit
93cad5f789951eaa27c3392b15294b4e51253944 upstream.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Some minor fixes to make it build]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-4-aneesh.kumar@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aneesh Kumar K.V [Tue, 24 Sep 2019 03:52:53 +0000 (09:22 +0530)]
powerpc/mm: Fixup tlbie vs mtpidr/mtlpidr ordering issue on POWER9
commit
047e6575aec71d75b765c22111820c4776cd1c43 upstream.
On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.
The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.
We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b5891c2f ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.
Cc: stable@vger.kernel.org
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com
[sandipan: Backported to v4.19]
Signed-off-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Kiszka [Wed, 4 Sep 2019 06:42:30 +0000 (08:42 +0200)]
platform/x86: pmc_atom: Add Siemens SIMATIC IPC227E to critclk_systems DMI table
commit
ad0d315b4d4e7138f43acf03308192ec00e9614d upstream.
The SIMATIC IPC227E uses the PMC clock for on-board components and gets
stuck during boot if the clock is disabled. Therefore, add this device
to the critical systems list.
Fixes:
648e921888ad ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Mikityanskiy [Tue, 7 May 2019 17:28:15 +0000 (20:28 +0300)]
wireless: Skip directory when generating certificates
[ Upstream commit
32b5a2c9950b9284000059d752f7afa164deb15e ]
Commit
715a12334764 ("wireless: don't write C files on failures") drops
the `test -f $$f` check. The list of targets contains the
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR directory itself, and this check used
to filter it out. After the check was removed, the extra keydir option
no longer works, failing with the following message:
od: 'standard input': read error: Is a directory
This commit restores the check to make extra keydir work again.
Fixes:
715a12334764 ("wireless: don't write C files on failures")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 22 Oct 2019 14:57:46 +0000 (07:57 -0700)]
net/flow_dissector: switch to siphash
[ Upstream commit
55667441c84fa5e0911a0aac44fb059c15ba6da2 ]
UDP IPv6 packets auto flowlabels are using a 32bit secret
(static u32 hashrnd in net/core/flow_dissector.c) and
apply jhash() over fields known by the receivers.
Attackers can easily infer the 32bit secret and use this information
to identify a device and/or user, since this 32bit secret is only
set at boot time.
Really, using jhash() to generate cookies sent on the wire
is a serious security concern.
Trying to change the rol32(hash, 16) in ip6_make_flowlabel() would be
a dead end. Trying to periodically change the secret (like in sch_sfq.c)
could change paths taken in the network for long lived flows.
Let's switch to siphash, as we did in commit
df453700e8d8
("inet: switch IP ID generator to siphash")
Using a cryptographically strong pseudo random function will solve this
privacy issue and more generally remove other weak points in the stack.
Packet schedulers using skb_get_hash_perturb() benefit from this change.
Fixes:
b56774163f99 ("ipv6: Enable auto flow labels by default")
Fixes:
42240901f7c4 ("ipv6: Implement different admin modes for automatic flow labels")
Fixes:
67800f9b1f4e ("ipv6: Call skb_get_hash_flowi6 to get skb->hash in ip6_make_flowlabel")
Fixes:
cb1ce2ef387b ("ipv6: Implement automatic flow label generation on transmit")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Jonathan Berger <jonathann1@walla.com>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reported-by: Benny Pinkas <benny@pinkas.net>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kazutoshi Noguchi [Sun, 20 Oct 2019 15:03:07 +0000 (00:03 +0900)]
r8152: add device id for Lenovo ThinkPad USB-C Dock Gen 2
[ Upstream commit
b3060531979422d5bb18d80226f978910284dc70 ]
This device is sold as 'ThinkPad USB-C Dock Gen 2 (40AS)'.
Chipset is RTL8153 and works with r8152.
Without this, the generic cdc_ether grabs the device, and the device jam
connected networks up when the machine suspends.
Signed-off-by: Kazutoshi Noguchi <noguchi.kazutosi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vivien Didelot [Fri, 18 Oct 2019 21:02:46 +0000 (17:02 -0400)]
net: dsa: fix switch tree list
[ Upstream commit
50c7d2ba9de20f60a2d527ad6928209ef67e4cdd ]
If there are multiple switch trees on the device, only the last one
will be listed, because the arguments of list_add_tail are swapped.
Fixes:
83c0afaec7b7 ("net: dsa: Add new binding implementation")
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Lunn [Thu, 17 Oct 2019 19:29:26 +0000 (21:29 +0200)]
net: usb: lan78xx: Connect PHY before registering MAC
[ Upstream commit
38b4fe320119859c11b1dc06f6b4987a16344fa1 ]
As soon as the netdev is registers, the kernel can start using the
interface. If the driver connects the MAC to the PHY after the netdev
is registered, there is a race condition where the interface can be
opened without having the PHY connected.
Change the order to close this race condition.
Fixes:
92571a1aae40 ("lan78xx: Connect phy early")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Wed, 16 Oct 2019 23:06:32 +0000 (16:06 -0700)]
net: bcmgenet: reset 40nm EPHY on energy detect
[ Upstream commit
25382b991d252aed961cd434176240f9de6bb15f ]
The EPHY integrated into the 40nm Set-Top Box devices can falsely
detect energy when connected to a disabled peer interface. When the
peer interface is enabled the EPHY will detect and report the link
as active, but on occasion may get into a state where it is not
able to exchange data with the connected GENET MAC. This issue has
not been observed when the link parameters are auto-negotiated;
however, it has been observed with a manually configured link.
It has been empirically determined that issuing a soft reset to the
EPHY when energy is detected prevents it from getting into this bad
state.
Fixes:
1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Wed, 16 Oct 2019 23:06:30 +0000 (16:06 -0700)]
net: phy: bcm7xxx: define soft_reset for 40nm EPHY
[ Upstream commit
fe586b823372a9f43f90e2c6aa0573992ce7ccb7 ]
The internal 40nm EPHYs use a "Workaround for putting the PHY in
IDDQ mode." These PHYs require a soft reset to restore functionality
after they are powered back up.
This commit defines the soft_reset function to use genphy_soft_reset
during phy_init_hw to accommodate this.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Doug Berger [Wed, 16 Oct 2019 23:06:29 +0000 (16:06 -0700)]
net: bcmgenet: don't set phydev->link from MAC
[ Upstream commit
7de48402faa32298c3551ea32c76ccb4f9d3025d ]
When commit
28b2e0d2cd13 ("net: phy: remove parameter new_link from
phy_mac_interrupt()") removed the new_link parameter it set the
phydev->link state from the MAC before invoking phy_mac_interrupt().
However, once commit
88d6272acaaa ("net: phy: avoid unneeded MDIO
reads in genphy_read_status") was added this initialization prevents
the proper determination of the connection parameters by the function
genphy_read_status().
This commit removes that initialization to restore the proper
functionality.
Fixes:
88d6272acaaa ("net: phy: avoid unneeded MDIO reads in genphy_read_status")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Sat, 5 Oct 2019 22:05:18 +0000 (15:05 -0700)]
net: dsa: b53: Do not clear existing mirrored port mask
[ Upstream commit
c763ac436b668d7417f0979430ec0312ede4093d ]
Clearing the existing bitmask of mirrored ports essentially prevents us
from capturing more than one port at any given time. This is clearly
wrong, do not clear the bitmask prior to setting up the new port.
Reported-by: Hubert Feurstein <h.feurstein@gmail.com>
Fixes:
ed3af5fd08eb ("net: dsa: b53: Add support for port mirroring")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aya Levin [Wed, 2 Oct 2019 13:53:21 +0000 (16:53 +0300)]
net/mlx5e: Fix ethtool self test: link speed
[ Upstream commit
534e7366f41b0c689b01af4375aefcd1462adedf ]
Ethtool self test contains a test for link speed. This test reads the
PTYS register and determines whether the current speed is valid or not.
Change current implementation to use the function mlx5e_port_linkspeed()
that does the same check and fails when speed is invalid. This code
redundancy lead to a bug when mlx5e_port_linkspeed() was updated with
expended speeds and the self test was not.
Fixes:
2c81bfd5ae56 ("net/mlx5e: Move port speed code from en_ethtool.c to en/port.c")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Thu, 31 Oct 2019 23:10:21 +0000 (00:10 +0100)]
r8169: fix wrong PHY ID issue with RTL8168dp
[ Upstream commit
62bdc8fd1c21d4263ebd18bec57f82532d09249f ]
As reported in [0] at least one RTL8168dp version has problems
establishing a link. This chip version has an integrated RTL8211b PHY,
however the chip seems to report a wrong PHY ID, resulting in a wrong
PHY driver (for Generic Realtek PHY) being loaded.
Work around this issue by adding a hook to r8168dp_2_mdio_read()
for returning the correct PHY ID.
[0] https://bbs.archlinux.org/viewtopic.php?id=246508
Fixes:
242cd9b5866a ("r8169: use phy_resume/phy_suspend")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Maxim Mikityanskiy [Mon, 16 Sep 2019 11:54:20 +0000 (14:54 +0300)]
net/mlx5e: Fix handling of compressed CQEs in case of low NAPI budget
[ Upstream commit
9df86bdb6746d7fcfc2fda715f7a7c3d0ddb2654 ]
When CQE compression is enabled, compressed CQEs use the following
structure: a title is followed by one or many blocks, each containing 8
mini CQEs (except the last, which may contain fewer mini CQEs).
Due to NAPI budget restriction, a complete structure is not always
parsed in one NAPI run, and some blocks with mini CQEs may be deferred
to the next NAPI poll call - we have the mlx5e_decompress_cqes_cont call
in the beginning of mlx5e_poll_rx_cq. However, if the budget is
extremely low, some blocks may be left even after that, but the code
that follows the mlx5e_decompress_cqes_cont call doesn't check it and
assumes that a new CQE begins, which may not be the case. In such cases,
random memory corruptions occur.
An extremely low NAPI budget of 8 is used when busy_poll or busy_read is
active.
This commit adds a check to make sure that the previous compressed CQE
has been completely parsed after mlx5e_decompress_cqes_cont, otherwise
it prevents a new CQE from being fetched in the middle of a compressed
CQE.
This commit fixes random crashes in __build_skb, __page_pool_put_page
and other not-related-directly places, that used to happen when both CQE
compression and busy_poll/busy_read were enabled.
Fixes:
7219ab34f184 ("net/mlx5e: CQE compression")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Sat, 26 Oct 2019 09:53:40 +0000 (11:53 +0200)]
selftests: fib_tests: add more tests for metric update
[ Upstream commit
37de3b354150450ba12275397155e68113e99901 ]
This patch adds two more tests to ipv4_addr_metric_test() to
explicitly cover the scenarios fixed by the previous patch.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Abeni [Sat, 26 Oct 2019 09:53:39 +0000 (11:53 +0200)]
ipv4: fix route update on metric change.
[ Upstream commit
0b834ba00ab5337e938c727e216e1f5249794717 ]
Since commit
af4d768ad28c ("net/ipv4: Add support for specifying metric
of connected routes"), when updating an IP address with a different metric,
the associated connected route is updated, too.
Still, the mentioned commit doesn't handle properly some corner cases:
$ ip addr add dev eth0 192.168.1.0/24
$ ip addr add dev eth0 192.168.2.1/32 peer 192.168.2.2
$ ip addr add dev eth0 192.168.3.1/24
$ ip addr change dev eth0 192.168.1.0/24 metric 10
$ ip addr change dev eth0 192.168.2.1/32 peer 192.168.2.2 metric 10
$ ip addr change dev eth0 192.168.3.1/24 metric 10
$ ip -4 route
192.168.1.0/24 dev eth0 proto kernel scope link src 192.168.1.0
192.168.2.2 dev eth0 proto kernel scope link src 192.168.2.1
192.168.3.0/24 dev eth0 proto kernel scope link src 192.168.2.1 metric 10
Only the last route is correctly updated.
The problem is the current test in fib_modify_prefix_metric():
if (!(dev->flags & IFF_UP) ||
ifa->ifa_flags & (IFA_F_SECONDARY | IFA_F_NOPREFIXROUTE) ||
ipv4_is_zeronet(prefix) ||
prefix == ifa->ifa_local || ifa->ifa_prefixlen == 32)
Which should be the logical 'not' of the pre-existing test in
fib_add_ifaddr():
if (!ipv4_is_zeronet(prefix) && !(ifa->ifa_flags & IFA_F_SECONDARY) &&
(prefix != addr || ifa->ifa_prefixlen < 32))
To properly negate the original expression, we need to change the last
logical 'or' to a logical 'and'.
Fixes:
af4d768ad28c ("net/ipv4: Add support for specifying metric of connected routes")
Reported-and-suggested-by: Beniamino Galvani <bgalvani@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 05:44:52 +0000 (22:44 -0700)]
net: add READ_ONCE() annotation in __skb_wait_for_more_packets()
[ Upstream commit
7c422d0ce97552dde4a97e6290de70ec6efb0fc6 ]
__skb_wait_for_more_packets() can be called while other cpus
can feed packets to the socket receive queue.
KCSAN reported :
BUG: KCSAN: data-race in __skb_wait_for_more_packets / __udp_enqueue_schedule_skb
write to 0xffff888102e40b58 of 8 bytes by interrupt on cpu 0:
__skb_insert include/linux/skbuff.h:1852 [inline]
__skb_queue_before include/linux/skbuff.h:1958 [inline]
__skb_queue_tail include/linux/skbuff.h:1991 [inline]
__udp_enqueue_schedule_skb+0x2d7/0x410 net/ipv4/udp.c:1470
__udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
__udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
read to 0xffff888102e40b58 of 8 bytes by task 13035 on cpu 1:
__skb_wait_for_more_packets+0xfa/0x320 net/core/datagram.c:100
__skb_recv_udp+0x374/0x500 net/ipv4/udp.c:1683
udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 13035 Comm: syz-executor.3 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 05:44:51 +0000 (22:44 -0700)]
net: use skb_queue_empty_lockless() in busy poll contexts
[ Upstream commit
3f926af3f4d688e2e11e7f8ed04e277a14d4d4a4 ]
Busy polling usually runs without locks.
Let's use skb_queue_empty_lockless() instead of skb_queue_empty()
Also uses READ_ONCE() in __skb_try_recv_datagram() to address
a similar potential problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 05:44:50 +0000 (22:44 -0700)]
net: use skb_queue_empty_lockless() in poll() handlers
[ Upstream commit
3ef7cf57c72f32f61e97f8fa401bc39ea1f1a5d4 ]
Many poll() handlers are lockless. Using skb_queue_empty_lockless()
instead of skb_queue_empty() is more appropriate.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 05:44:49 +0000 (22:44 -0700)]
udp: use skb_queue_empty_lockless()
[ Upstream commit
137a0dbe3426fd7bcfe3f8117b36a87b3590e4eb ]
syzbot reported a data-race [1].
We should use skb_queue_empty_lockless() to document that we are
not ensuring a mutual exclusion and silence KCSAN.
[1]
BUG: KCSAN: data-race in __skb_recv_udp / __udp_enqueue_schedule_skb
write to 0xffff888122474b50 of 8 bytes by interrupt on cpu 0:
__skb_insert include/linux/skbuff.h:1852 [inline]
__skb_queue_before include/linux/skbuff.h:1958 [inline]
__skb_queue_tail include/linux/skbuff.h:1991 [inline]
__udp_enqueue_schedule_skb+0x2c1/0x410 net/ipv4/udp.c:1470
__udp_queue_rcv_skb net/ipv4/udp.c:1940 [inline]
udp_queue_rcv_one_skb+0x7bd/0xc70 net/ipv4/udp.c:2057
udp_queue_rcv_skb+0xb5/0x400 net/ipv4/udp.c:2074
udp_unicast_rcv_skb.isra.0+0x7e/0x1c0 net/ipv4/udp.c:2233
__udp4_lib_rcv+0xa44/0x17c0 net/ipv4/udp.c:2300
udp_rcv+0x2b/0x40 net/ipv4/udp.c:2470
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
read to 0xffff888122474b50 of 8 bytes by task 8921 on cpu 1:
skb_queue_empty include/linux/skbuff.h:1494 [inline]
__skb_recv_udp+0x18d/0x500 net/ipv4/udp.c:1653
udp_recvmsg+0xe1/0xb10 net/ipv4/udp.c:1712
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 8921 Comm: syz-executor.4 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 05:44:48 +0000 (22:44 -0700)]
net: add skb_queue_empty_lockless()
[ Upstream commit
d7d16a89350ab263484c0aa2b523dd3a234e4a80 ]
Some paths call skb_queue_empty() without holding
the queue lock. We must use a barrier in order
to not let the compiler do strange things, and avoid
KCSAN splats.
Adding a barrier in skb_queue_empty() might be overkill,
I prefer adding a new helper to clearly identify
points where the callers might be lockless. This might
help us finding real bugs.
The corresponding WRITE_ONCE() should add zero cost
for current compilers.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 28 Oct 2019 17:24:32 +0000 (01:24 +0800)]
vxlan: check tun_info options_len properly
[ Upstream commit
eadf52cf1852196a1363044dcda22fa5d7f296f7 ]
This patch is to improve the tun_info options_len by dropping
the skb when TUNNEL_VXLAN_OPT is set but options_len is less
than vxlan_metadata. This can void a potential out-of-bounds
access on ip_tun_info.
Fixes:
ee122c79d422 ("vxlan: Flow based tunneling")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Thu, 24 Oct 2019 18:43:31 +0000 (11:43 -0700)]
udp: fix data-race in udp_set_dev_scratch()
[ Upstream commit
a793183caa9afae907a0d7ddd2ffd57329369bf5 ]
KCSAN reported a data-race in udp_set_dev_scratch() [1]
The issue here is that we must not write over skb fields
if skb is shared. A similar issue has been fixed in commit
89c22d8c3b27 ("net: Fix skb csum races when peeking")
While we are at it, use a helper only dealing with
udp_skb_scratch(skb)->csum_unnecessary, as this allows
udp_set_dev_scratch() to be called once and thus inlined.
[1]
BUG: KCSAN: data-race in udp_set_dev_scratch / udpv6_recvmsg
write to 0xffff888120278317 of 1 bytes by task 10411 on cpu 1:
udp_set_dev_scratch+0xea/0x200 net/ipv4/udp.c:1308
__first_packet_length+0x147/0x420 net/ipv4/udp.c:1556
first_packet_length+0x68/0x2a0 net/ipv4/udp.c:1579
udp_poll+0xea/0x110 net/ipv4/udp.c:2720
sock_poll+0xed/0x250 net/socket.c:1256
vfs_poll include/linux/poll.h:90 [inline]
do_select+0x7d0/0x1020 fs/select.c:534
core_sys_select+0x381/0x550 fs/select.c:677
do_pselect.constprop.0+0x11d/0x160 fs/select.c:759
__do_sys_pselect6 fs/select.c:784 [inline]
__se_sys_pselect6 fs/select.c:769 [inline]
__x64_sys_pselect6+0x12e/0x170 fs/select.c:769
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
read to 0xffff888120278317 of 1 bytes by task 10413 on cpu 0:
udp_skb_csum_unnecessary include/net/udp.h:358 [inline]
udpv6_recvmsg+0x43e/0xe90 net/ipv6/udp.c:310
inet6_recvmsg+0xbb/0x240 net/ipv6/af_inet6.c:592
sock_recvmsg_nosec+0x5c/0x70 net/socket.c:871
___sys_recvmsg+0x1a0/0x3e0 net/socket.c:2480
do_recvmmsg+0x19a/0x5c0 net/socket.c:2601
__sys_recvmmsg+0x1ef/0x200 net/socket.c:2680
__do_sys_recvmmsg net/socket.c:2703 [inline]
__se_sys_recvmmsg net/socket.c:2696 [inline]
__x64_sys_recvmmsg+0x89/0xb0 net/socket.c:2696
do_syscall_64+0xcc/0x370 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 10413 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
2276f58ac589 ("udp: use a separate rx queue for packet reception")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wei Wang [Thu, 31 Oct 2019 23:24:36 +0000 (16:24 -0700)]
selftests: net: reuseport_dualstack: fix uninitalized parameter
[ Upstream commit
d64479a3e3f9924074ca7b50bd72fa5211dca9c1 ]
This test reports EINVAL for getsockopt(SOL_SOCKET, SO_DOMAIN)
occasionally due to the uninitialized length parameter.
Initialize it to fix this, and also use int for "test_family" to comply
with the API standard.
Fixes:
d6a61f80b871 ("soreuseport: test mixed v4/v6 sockets")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Cc: Craig Gallek <cgallek@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zhanglin [Sat, 26 Oct 2019 07:54:16 +0000 (15:54 +0800)]
net: Zeroing the structure ethtool_wolinfo in ethtool_get_wol()
[ Upstream commit
5ff223e86f5addbfae26419cbb5d61d98f6fbf7d ]
memset() the structure ethtool_wolinfo that has padded bytes
but the padded bytes have not been zeroed out.
Signed-off-by: zhanglin <zhang.lin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniel Wagner [Fri, 25 Oct 2019 08:04:13 +0000 (10:04 +0200)]
net: usb: lan78xx: Disable interrupts before calling generic_handle_irq()
[ Upstream commit
0a29ac5bd3a988dc151c8d26910dec2557421f64 ]
lan78xx_status() will run with interrupts enabled due to the change in
ed194d136769 ("usb: core: remove local_irq_save() around ->complete()
handler"). generic_handle_irq() expects to be run with IRQs disabled.
[ 4.886203] 000: irq 79 handler irq_default_primary_handler+0x0/0x8 enabled interrupts
[ 4.886243] 000: WARNING: CPU: 0 PID: 0 at kernel/irq/handle.c:152 __handle_irq_event_percpu+0x154/0x168
[ 4.896294] 000: Modules linked in:
[ 4.896301] 000: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.6 #39
[ 4.896310] 000: Hardware name: Raspberry Pi 3 Model B+ (DT)
[ 4.896315] 000: pstate:
60000005 (nZCv daif -PAN -UAO)
[ 4.896321] 000: pc : __handle_irq_event_percpu+0x154/0x168
[ 4.896331] 000: lr : __handle_irq_event_percpu+0x154/0x168
[ 4.896339] 000: sp :
ffff000010003cc0
[ 4.896346] 000: x29:
ffff000010003cc0 x28:
0000000000000060
[ 4.896355] 000: x27:
ffff000011021980 x26:
ffff00001189c72b
[ 4.896364] 000: x25:
ffff000011702bc0 x24:
ffff800036d6e400
[ 4.896373] 000: x23:
000000000000004f x22:
ffff000010003d64
[ 4.896381] 000: x21:
0000000000000000 x20:
0000000000000002
[ 4.896390] 000: x19:
ffff8000371c8480 x18:
0000000000000060
[ 4.896398] 000: x17:
0000000000000000 x16:
00000000000000eb
[ 4.896406] 000: x15:
ffff000011712d18 x14:
7265746e69206465
[ 4.896414] 000: x13:
ffff000010003ba0 x12:
ffff000011712df0
[ 4.896422] 000: x11:
0000000000000001 x10:
ffff000011712e08
[ 4.896430] 000: x9 :
0000000000000001 x8 :
000000000003c920
[ 4.896437] 000: x7 :
ffff0000118cc410 x6 :
ffff0000118c7f00
[ 4.896445] 000: x5 :
000000000003c920 x4 :
0000000000004510
[ 4.896453] 000: x3 :
ffff000011712dc8 x2 :
0000000000000000
[ 4.896461] 000: x1 :
73a3f67df94c1500 x0 :
0000000000000000
[ 4.896466] 000: Call trace:
[ 4.896471] 000: __handle_irq_event_percpu+0x154/0x168
[ 4.896481] 000: handle_irq_event_percpu+0x50/0xb0
[ 4.896489] 000: handle_irq_event+0x40/0x98
[ 4.896497] 000: handle_simple_irq+0xa4/0xf0
[ 4.896505] 000: generic_handle_irq+0x24/0x38
[ 4.896513] 000: intr_complete+0xb0/0xe0
[ 4.896525] 000: __usb_hcd_giveback_urb+0x58/0xd8
[ 4.896533] 000: usb_giveback_urb_bh+0xd0/0x170
[ 4.896539] 000: tasklet_action_common.isra.0+0x9c/0x128
[ 4.896549] 000: tasklet_hi_action+0x24/0x30
[ 4.896556] 000: __do_softirq+0x120/0x23c
[ 4.896564] 000: irq_exit+0xb8/0xd8
[ 4.896571] 000: __handle_domain_irq+0x64/0xb8
[ 4.896579] 000: bcm2836_arm_irqchip_handle_irq+0x60/0xc0
[ 4.896586] 000: el1_irq+0xb8/0x140
[ 4.896592] 000: arch_cpu_idle+0x10/0x18
[ 4.896601] 000: do_idle+0x200/0x280
[ 4.896608] 000: cpu_startup_entry+0x20/0x28
[ 4.896615] 000: rest_init+0xb4/0xc0
[ 4.896623] 000: arch_call_rest_init+0xc/0x14
[ 4.896632] 000: start_kernel+0x454/0x480
Fixes:
ed194d136769 ("usb: core: remove local_irq_save() around ->complete() handler")
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Stefan Wahren <wahrenst@gmx.net>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Tested-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Wed, 23 Oct 2019 16:39:04 +0000 (18:39 +0200)]
netns: fix GFP flags in rtnl_net_notifyid()
[ Upstream commit
d4e4fdf9e4a27c87edb79b1478955075be141f67 ]
In rtnl_net_notifyid(), we certainly can't pass a null GFP flag to
rtnl_notify(). A GFP_KERNEL flag would be fine in most circumstances,
but there are a few paths calling rtnl_net_notifyid() from atomic
context or from RCU critical sections. The later also precludes the use
of gfp_any() as it wouldn't detect the RCU case. Also, the nlmsg_new()
call is wrong too, as it uses GFP_KERNEL unconditionally.
Therefore, we need to pass the GFP flags as parameter and propagate it
through function calls until the proper flags can be determined.
In most cases, GFP_KERNEL is fine. The exceptions are:
* openvswitch: ovs_vport_cmd_get() and ovs_vport_cmd_dump()
indirectly call rtnl_net_notifyid() from RCU critical section,
* rtnetlink: rtmsg_ifinfo_build_skb() already receives GFP flags as
parameter.
Also, in ovs_vport_cmd_build_info(), let's change the GFP flags used
by nlmsg_new(). The function is allowed to sleep, so better make the
flags consistent with the ones used in the following
ovs_vport_cmd_fill_info() call.
Found by code inspection.
Fixes:
9a9634545c70 ("netns: notify netns id events")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eran Ben Elisha [Sun, 27 Oct 2019 14:39:15 +0000 (16:39 +0200)]
net/mlx4_core: Dynamically set guaranteed amount of counters per VF
[ Upstream commit
e19868efea0c103f23b4b7e986fd0a703822111f ]
Prior to this patch, the amount of counters guaranteed per VF in the
resource tracker was MLX4_VF_COUNTERS_PER_PORT * MLX4_MAX_PORTS. It was
set regardless if the VF was single or dual port.
This caused several VFs to have no guaranteed counters although the
system could satisfy their request.
The fix is to dynamically guarantee counters, based on each VF
specification.
Fixes:
9de92c60beaa ("net/mlx4_core: Adjust counter grant policy in the resource tracker")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jiangfeng Xiao [Mon, 28 Oct 2019 05:09:46 +0000 (13:09 +0800)]
net: hisilicon: Fix ping latency when deal with high throughput
[ Upstream commit
e56bd641ca61beb92b135298d5046905f920b734 ]
This is due to error in over budget processing.
When dealing with high throughput, the used buffers
that exceeds the budget is not cleaned up. In addition,
it takes a lot of cycles to clean up the used buffer,
and then the buffer where the valid data is located can take effect.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tejun Heo [Thu, 24 Oct 2019 20:50:27 +0000 (13:50 -0700)]
net: fix sk_page_frag() recursion from memory reclaim
[ Upstream commit
20eb4f29b60286e0d6dc01d9c260b4bd383c58fb ]
sk_page_frag() optimizes skb_frag allocations by using per-task
skb_frag cache when it knows it's the only user. The condition is
determined by seeing whether the socket allocation mask allows
blocking - if the allocation may block, it obviously owns the task's
context and ergo exclusively owns current->task_frag.
Unfortunately, this misses recursion through memory reclaim path.
Please take a look at the following backtrace.
[2] RIP: 0010:tcp_sendmsg_locked+0xccf/0xe10
...
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
sock_xmit.isra.24+0xa1/0x170 [nbd]
nbd_send_cmd+0x1d2/0x690 [nbd]
nbd_queue_rq+0x1b5/0x3b0 [nbd]
__blk_mq_try_issue_directly+0x108/0x1b0
blk_mq_request_issue_directly+0xbd/0xe0
blk_mq_try_issue_list_directly+0x41/0xb0
blk_mq_sched_insert_requests+0xa2/0xe0
blk_mq_flush_plug_list+0x205/0x2a0
blk_flush_plug_list+0xc3/0xf0
[1] blk_finish_plug+0x21/0x2e
_xfs_buf_ioapply+0x313/0x460
__xfs_buf_submit+0x67/0x220
xfs_buf_read_map+0x113/0x1a0
xfs_trans_read_buf_map+0xbf/0x330
xfs_btree_read_buf_block.constprop.42+0x95/0xd0
xfs_btree_lookup_get_block+0x95/0x170
xfs_btree_lookup+0xcc/0x470
xfs_bmap_del_extent_real+0x254/0x9a0
__xfs_bunmapi+0x45c/0xab0
xfs_bunmapi+0x15/0x30
xfs_itruncate_extents_flags+0xca/0x250
xfs_free_eofblocks+0x181/0x1e0
xfs_fs_destroy_inode+0xa8/0x1b0
destroy_inode+0x38/0x70
dispose_list+0x35/0x50
prune_icache_sb+0x52/0x70
super_cache_scan+0x120/0x1a0
do_shrink_slab+0x120/0x290
shrink_slab+0x216/0x2b0
shrink_node+0x1b6/0x4a0
do_try_to_free_pages+0xc6/0x370
try_to_free_mem_cgroup_pages+0xe3/0x1e0
try_charge+0x29e/0x790
mem_cgroup_charge_skmem+0x6a/0x100
__sk_mem_raise_allocated+0x18e/0x390
__sk_mem_schedule+0x2a/0x40
[0] tcp_sendmsg_locked+0x8eb/0xe10
tcp_sendmsg+0x27/0x40
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x26d/0x2b0
__sys_sendmsg+0x57/0xa0
do_syscall_64+0x42/0x100
entry_SYSCALL_64_after_hwframe+0x44/0xa9
In [0], tcp_send_msg_locked() was using current->page_frag when it
called sk_wmem_schedule(). It already calculated how many bytes can
be fit into current->page_frag. Due to memory pressure,
sk_wmem_schedule() called into memory reclaim path which called into
xfs and then IO issue path. Because the filesystem in question is
backed by nbd, the control goes back into the tcp layer - back into
tcp_sendmsg_locked().
nbd sets sk_allocation to (GFP_NOIO | __GFP_MEMALLOC) which makes
sense - it's in the process of freeing memory and wants to be able to,
e.g., drop clean pages to make forward progress. However, this
confused sk_page_frag() called from [2]. Because it only tests
whether the allocation allows blocking which it does, it now thinks
current->page_frag can be used again although it already was being
used in [0].
After [2] used current->page_frag, the offset would be increased by
the used amount. When the control returns to [0],
current->page_frag's offset is increased and the previously calculated
number of bytes now may overrun the end of allocated memory leading to
silent memory corruptions.
Fix it by adding gfpflags_normal_context() which tests sleepable &&
!reclaim and use it to determine whether to use current->task_frag.
v2: Eric didn't like gfp flags being tested twice. Introduce a new
helper gfpflags_normal_context() and combine the two tests.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Herrenschmidt [Fri, 25 Oct 2019 02:47:24 +0000 (13:47 +1100)]
net: ethernet: ftgmac100: Fix DMA coherency issue with SW checksum
[ Upstream commit
88824e3bf29a2fcacfd9ebbfe03063649f0f3254 ]
We are calling the checksum helper after the dma_map_single()
call to map the packet. This is incorrect as the checksumming
code will touch the packet from the CPU. This means the cache
won't be properly flushes (or the bounce buffering will leave
us with the unmodified packet to DMA).
This moves the calculation of the checksum & vlan tags to
before the DMA mapping.
This also has the side effect of fixing another bug: If the
checksum helper fails, we goto "drop" to drop the packet, which
will not unmap the DMA mapping.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Fixes:
05690d633f30 ("ftgmac100: Upgrade to NETIF_F_HW_CSUM")
Reviewed-by: Vijay Khemka <vijaykhemka@fb.com>
Tested-by: Vijay Khemka <vijaykhemka@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Fainelli [Thu, 31 Oct 2019 22:54:05 +0000 (15:54 -0700)]
net: dsa: bcm_sf2: Fix IMP setup for port different than 8
[ Upstream commit
5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ]
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes:
9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 29 Oct 2019 17:54:44 +0000 (10:54 -0700)]
net: annotate lockless accesses to sk->sk_napi_id
[ Upstream commit
ee8d153d46a3b98c064ee15c0c0a3bbf1450e5a1 ]
We already annotated most accesses to sk->sk_napi_id
We missed sk_mark_napi_id() and sk_mark_napi_id_once()
which might be called without socket lock held in UDP stack.
KCSAN reported :
BUG: KCSAN: data-race in udpv6_queue_rcv_one_skb / udpv6_queue_rcv_one_skb
write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 0:
sk_mark_napi_id include/net/busy_poll.h:125 [inline]
__udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
__udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
dst_input include/net/dst.h:442 [inline]
ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
napi_poll net/core/dev.c:6392 [inline]
net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
write to 0xffff888121c6d108 of 4 bytes by interrupt on cpu 1:
sk_mark_napi_id include/net/busy_poll.h:125 [inline]
__udpv6_queue_rcv_skb net/ipv6/udp.c:571 [inline]
udpv6_queue_rcv_one_skb+0x70c/0xb40 net/ipv6/udp.c:672
udpv6_queue_rcv_skb+0xb5/0x400 net/ipv6/udp.c:689
udp6_unicast_rcv_skb.isra.0+0xd7/0x180 net/ipv6/udp.c:832
__udp6_lib_rcv+0x69c/0x1770 net/ipv6/udp.c:913
udpv6_rcv+0x2b/0x40 net/ipv6/udp.c:1015
ip6_protocol_deliver_rcu+0x22a/0xbe0 net/ipv6/ip6_input.c:409
ip6_input_finish+0x30/0x50 net/ipv6/ip6_input.c:450
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip6_input+0x177/0x190 net/ipv6/ip6_input.c:459
dst_input include/net/dst.h:442 [inline]
ip6_rcv_finish+0x110/0x140 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ipv6_rcv+0x1a1/0x1b0 net/ipv6/ip6_input.c:284
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10890 Comm: syz-executor.0 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes:
e68b6e50fa35 ("udp: enable busy polling for all sockets")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Wed, 30 Oct 2019 20:00:04 +0000 (13:00 -0700)]
net: annotate accesses to sk->sk_incoming_cpu
[ Upstream commit
7170a977743b72cf3eb46ef6ef89885dc7ad3621 ]
This socket field can be read and written by concurrent cpus.
Use READ_ONCE() and WRITE_ONCE() annotations to document this,
and avoid some compiler 'optimizations'.
KCSAN reported :
BUG: KCSAN: data-race in tcp_v4_rcv / tcp_v4_rcv
write to 0xffff88812220763c of 4 bytes by interrupt on cpu 0:
sk_incoming_cpu_update include/net/sock.h:953 [inline]
tcp_v4_rcv+0x1b3c/0x1bb0 net/ipv4/tcp_ipv4.c:1934
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
napi_poll net/core/dev.c:6392 [inline]
net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
__do_softirq+0x115/0x33f kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
do_softirq.part.0+0x6b/0x80 kernel/softirq.c:337
do_softirq kernel/softirq.c:329 [inline]
__local_bh_enable_ip+0x76/0x80 kernel/softirq.c:189
read to 0xffff88812220763c of 4 bytes by interrupt on cpu 1:
sk_incoming_cpu_update include/net/sock.h:952 [inline]
tcp_v4_rcv+0x181a/0x1bb0 net/ipv4/tcp_ipv4.c:1934
ip_protocol_deliver_rcu+0x4d/0x420 net/ipv4/ip_input.c:204
ip_local_deliver_finish+0x110/0x140 net/ipv4/ip_input.c:231
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_local_deliver+0x133/0x210 net/ipv4/ip_input.c:252
dst_input include/net/dst.h:442 [inline]
ip_rcv_finish+0x121/0x160 net/ipv4/ip_input.c:413
NF_HOOK include/linux/netfilter.h:305 [inline]
NF_HOOK include/linux/netfilter.h:299 [inline]
ip_rcv+0x18f/0x1a0 net/ipv4/ip_input.c:523
__netif_receive_skb_one_core+0xa7/0xe0 net/core/dev.c:5010
__netif_receive_skb+0x37/0xf0 net/core/dev.c:5124
process_backlog+0x1d3/0x420 net/core/dev.c:5955
napi_poll net/core/dev.c:6392 [inline]
net_rx_action+0x3ae/0xa90 net/core/dev.c:6460
__do_softirq+0x115/0x33f kernel/softirq.c:292
run_ksoftirqd+0x46/0x60 kernel/softirq.c:603
smpboot_thread_fn+0x37d/0x4a0 kernel/smpboot.c:165
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 5.4.0-rc3+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Fri, 1 Nov 2019 17:32:19 +0000 (10:32 -0700)]
inet: stop leaking jiffies on the wire
[ Upstream commit
a904a0693c189691eeee64f6c6b188bd7dc244e9 ]
Historically linux tried to stick to RFC 791, 1122, 2003
for IPv4 ID field generation.
RFC 6864 made clear that no matter how hard we try,
we can not ensure unicity of IP ID within maximum
lifetime for all datagrams with a given source
address/destination address/protocol tuple.
Linux uses a per socket inet generator (inet_id), initialized
at connection startup with a XOR of 'jiffies' and other
fields that appear clear on the wire.
Thiemo Nagel pointed that this strategy is a privacy
concern as this provides 16 bits of entropy to fingerprint
devices.
Let's switch to a random starting point, this is just as
good as far as RFC 6864 is concerned and does not leak
anything critical.
Fixes:
1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Xin Long [Mon, 28 Oct 2019 15:19:35 +0000 (23:19 +0800)]
erspan: fix the tun_info options_len check for erspan
[ Upstream commit
2eb8d6d2910cfe3dc67dc056f26f3dd9c63d47cd ]
The check for !md doens't really work for ip_tunnel_info_opts(info) which
only does info + 1. Also to avoid out-of-bounds access on info, it should
ensure options_len is not less than erspan_metadata in both erspan_xmit()
and ip6erspan_tunnel_xmit().
Fixes:
1a66a836da ("gre: add collect_md mode to ERSPAN tunnel")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Mon, 4 Nov 2019 15:57:55 +0000 (07:57 -0800)]
dccp: do not leak jiffies on the wire
[ Upstream commit
3d1e5039f5f87a8731202ceca08764ee7cb010d3 ]
For some reason I missed the case of DCCP passive
flows in my previous patch.
Fixes:
a904a0693c18 ("inet: stop leaking jiffies on the wire")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Thiemo Nagel <tnagel@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vishal Kulkarni [Wed, 30 Oct 2019 14:47:57 +0000 (20:17 +0530)]
cxgb4: fix panic when attaching to ULD fail
[ Upstream commit
fc89cc358fb64e2429aeae0f37906126636507ec ]
Release resources when attaching to ULD fail. Otherwise, data
mismatch is seen between LLD and ULD later on, which lead to
kernel panic when accessing resources that should not even
exist in the first place.
Fixes:
94cdb8bb993a ("cxgb4: Add support for dynamic allocation of resources for ULD")
Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com>
Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josef Bacik [Mon, 21 Oct 2019 19:56:28 +0000 (15:56 -0400)]
nbd: handle racing with error'ed out commands
[ Upstream commit
7ce23e8e0a9cd38338fc8316ac5772666b565ca9 ]
We hit the following warning in production
print_req_error: I/O error, dev nbd0, sector
7213934408 flags 80700
------------[ cut here ]------------
refcount_t: underflow; use-after-free.
WARNING: CPU: 25 PID: 32407 at lib/refcount.c:190 refcount_sub_and_test_checked+0x53/0x60
Workqueue: knbd-recv recv_work [nbd]
RIP: 0010:refcount_sub_and_test_checked+0x53/0x60
Call Trace:
blk_mq_free_request+0xb7/0xf0
blk_mq_complete_request+0x62/0xf0
recv_work+0x29/0xa1 [nbd]
process_one_work+0x1f5/0x3f0
worker_thread+0x2d/0x3d0
? rescuer_thread+0x340/0x340
kthread+0x111/0x130
? kthread_create_on_node+0x60/0x60
ret_from_fork+0x1f/0x30
---[ end trace
b079c3c67f98bb7c ]---
This was preceded by us timing out everything and shutting down the
sockets for the device. The problem is we had a request in the queue at
the same time, so we completed the request twice. This can actually
happen in a lot of cases, we fail to get a ref on our config, we only
have one connection and just error out the command, etc.
Fix this by checking cmd->status in nbd_read_stat. We only change this
under the cmd->lock, so we are safe to check this here and see if we've
already error'ed this command out, which would indicate that we've
completed it as well.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Josef Bacik [Mon, 21 Oct 2019 19:56:27 +0000 (15:56 -0400)]
nbd: protect cmd->status with cmd->lock
[ Upstream commit
de6346ecbc8f5591ebd6c44ac164e8b8671d71d7 ]
We already do this for the most part, except in timeout and clear_req.
For the timeout case we take the lock after we grab a ref on the config,
but that isn't really necessary because we're safe to touch the cmd at
this point, so just move the order around.
For the clear_req cause this is initiated by the user, so again is safe.
Reviewed-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dave Wysochanski [Wed, 23 Oct 2019 09:02:33 +0000 (05:02 -0400)]
cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
[ Upstream commit
d46b0da7a33dd8c99d969834f682267a45444ab3 ]
There's a deadlock that is possible and can easily be seen with
a test where multiple readers open/read/close of the same file
and a disruption occurs causing reconnect. The deadlock is due
a reader thread inside cifs_strict_readv calling down_read and
obtaining lock_sem, and then after reconnect inside
cifs_reopen_file calling down_read a second time. If in
between the two down_read calls, a down_write comes from
another process, deadlock occurs.
CPU0 CPU1
---- ----
cifs_strict_readv()
down_read(&cifsi->lock_sem);
_cifsFileInfo_put
OR
cifs_new_fileinfo
down_write(&cifsi->lock_sem);
cifs_reopen_file()
down_read(&cifsi->lock_sem);
Fix the above by changing all down_write(lock_sem) calls to
down_write_trylock(lock_sem)/msleep() loop, which in turn
makes the second down_read call benign since it will never
block behind the writer while holding lock_sem.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Suggested-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed--by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>