Yang Shi [Sat, 16 Nov 2019 01:34:33 +0000 (17:34 -0800)]
mm: mempolicy: fix the wrong return value and potential pages leak of mbind
commit
a85dfc305a21acfc48fa28a0fa0a0cb6ad496120 upstream.
Commit
d883544515aa ("mm: mempolicy: make the behavior consistent when
MPOL_MF_MOVE* and MPOL_MF_STRICT were specified") fixed the return value
of mbind() for a couple of corner cases. But, it altered the errno for
some other cases, for example, mbind() should return -EFAULT when part
or all of the memory range specified by nodemask and maxnode points
outside your accessible address space, or there was an unmapped hole in
the specified memory range specified by addr and len.
Fix this by preserving the errno returned by queue_pages_range(). And,
the pagelist may be not empty even though queue_pages_range() returns
error, put the pages back to LRU since mbind_range() is not called to
really apply the policy so those pages should not be migrated, this is
also the old behavior before the problematic commit.
Link: http://lkml.kernel.org/r/1572454731-3925-1-git-send-email-yang.shi@linux.alibaba.com
Fixes:
d883544515aa ("mm: mempolicy: make the behavior consistent when MPOL_MF_MOVE* and MPOL_MF_STRICT were specified")
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reported-by: Li Xinhai <lixinhai.lxh@gmail.com>
Reviewed-by: Li Xinhai <lixinhai.lxh@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: <stable@vger.kernel.org> [4.19 and 5.2+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Auger [Fri, 8 Nov 2019 15:58:03 +0000 (16:58 +0100)]
iommu/vt-d: Fix QI_DEV_IOTLB_PFSID and QI_DEV_EIOTLB_PFSID macros
commit
4e7120d79edb31e4ee68e6f8421448e4603be1e9 upstream.
For both PASID-based-Device-TLB Invalidate Descriptor and
Device-TLB Invalidate Descriptor, the Physical Function Source-ID
value is split according to this layout:
PFSID[3:0] is set at offset 12 and PFSID[15:4] is put at offset 52.
Fix the part laid out at offset 52.
Fixes:
0f725561e1684 ("iommu/vt-d: Add definitions for PFSID")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: stable@vger.kernel.org # v4.19+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Corentin Labbe [Sun, 10 Nov 2019 11:30:48 +0000 (11:30 +0000)]
net: ethernet: dwmac-sun8i: Use the correct function in exit path
commit
40a1dcee2d1846a24619fe9ca45c661ca0db7dda upstream.
When PHY is not powered, the probe function fail and some resource are
still unallocated.
Furthermore some BUG happens:
dwmac-sun8i 5020000.ethernet: EMAC reset timeout
------------[ cut here ]------------
kernel BUG at /linux-next/net/core/dev.c:9844!
So let's use the right function (stmmac_pltfr_remove) in the error path.
Fixes:
9f93ac8d4085 ("net-next: stmmac: Add dwmac-sun8i")
Cc: <stable@vger.kernel.org> # v4.15+
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 3 Nov 2019 18:55:43 +0000 (13:55 -0500)]
ecryptfs_lookup_interpose(): lower_dentry->d_parent is not stable either
commit
762c69685ff7ad5ad7fee0656671e20a0c9c864d upstream.
We need to get the underlying dentry of parent; sure, absent the races
it is the parent of underlying dentry, but there's nothing to prevent
losing a timeslice to preemtion in the middle of evaluation of
lower_dentry->d_parent->d_inode, having another process move lower_dentry
around and have its (ex)parent not pinned anymore and freed on memory
pressure. Then we regain CPU and try to fetch ->d_inode from memory
that is freed by that point.
dentry->d_parent *is* stable here - it's an argument of ->lookup() and
we are guaranteed that it won't be moved anywhere until we feed it
to d_add/d_splice_alias. So we safely go that way to get to its
underlying dentry.
Cc: stable@vger.kernel.org # since 2009 or so
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Al Viro [Sun, 3 Nov 2019 18:45:04 +0000 (13:45 -0500)]
ecryptfs_lookup_interpose(): lower_dentry->d_inode is not stable
commit
e72b9dd6a5f17d0fb51f16f8685f3004361e83d0 upstream.
lower_dentry can't go from positive to negative (we have it pinned),
but it *can* go from negative to positive. So fetching ->d_inode
into a local variable, doing a blocking allocation, checking that
now ->d_inode is non-NULL and feeding the value we'd fetched
earlier to a function that won't accept NULL is not a good idea.
Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Wed, 13 Nov 2019 18:29:38 +0000 (19:29 +0100)]
i2c: acpi: Force bus speed to 400KHz if a Silead touchscreen is present
commit
7574c0db2e68c4d0bae9d415a683bdd8b2a761e9 upstream.
Many cheap devices use Silead touchscreen controllers. Testing has shown
repeatedly that these touchscreen controllers work fine at 400KHz, but for
unknown reasons do not work properly at 100KHz. This has been seen on
both ARM and x86 devices using totally different i2c controllers.
On some devices the ACPI tables list another device at the same I2C-bus
as only being capable of 100KHz, testing has shown that these other
devices work fine at 400KHz (as can be expected of any recent I2C hw).
This commit makes i2c_acpi_find_bus_speed() always return 400KHz if a
Silead touchscreen controller is present, fixing the touchscreen not
working on devices which ACPI tables' wrongly list another device on the
same bus as only being capable of 100KHz.
Specifically this fixes the touchscreen on the Jumper EZpad 6 m4 not
working.
Reported-by: youling 257 <youling257@gmail.com>
Tested-by: youling 257 <youling257@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[wsa: rewording warning a little]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mike Marciniszyn [Fri, 4 Oct 2019 20:49:34 +0000 (16:49 -0400)]
IB/hfi1: Use a common pad buffer for 9B and 16B packets
commit
22bb13653410424d9fce8d447506a41f8292f22f upstream.
There is no reason for a different pad buffer for the two
packet types.
Expand the current buffer allocation to allow for both
packet types.
Fixes:
f8195f3b14a0 ("IB/hfi1: Eliminate allocation while atomic")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Link: https://lore.kernel.org/r/20191004204934.26838.13099.stgit@awfm-01.aw.intel.com
Signed-off-by: Doug Ledford <dledford@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
James Erwin [Fri, 1 Nov 2019 19:20:59 +0000 (15:20 -0400)]
IB/hfi1: Ensure full Gen3 speed in a Gen4 system
commit
a9c3c4c597704b3a1a2b9bef990e7d8a881f6533 upstream.
If an hfi1 card is inserted in a Gen4 systems, the driver will avoid the
gen3 speed bump and the card will operate at half speed.
This is because the driver avoids the gen3 speed bump when the parent bus
speed isn't identical to gen3, 8.0GT/s. This is not compatible with gen4
and newer speeds.
Fix by relaxing the test to explicitly look for the lower capability
speeds which inherently allows for gen4 and all future speeds.
Fixes:
7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20191101192059.106248.1699.stgit@awfm-01.aw.intel.com
Cc: <stable@vger.kernel.org>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Reviewed-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: James Erwin <james.erwin@intel.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuhong Yuan [Fri, 15 Nov 2019 19:32:36 +0000 (11:32 -0800)]
Input: synaptics-rmi4 - destroy F54 poller workqueue when removing
commit
ba60cf9f78f0d7c8e73c7390608f7f818ee68aa0 upstream.
The driver forgets to destroy workqueue in remove() similarly to what is
done when probe() fails. Add a call to destroy_workqueue() to fix it.
Since unregistration will wait for the work to finish, we do not need to
cancel/flush the work instance in remove().
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191114023405.31477-1-hslester96@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Wed, 13 Nov 2019 00:47:08 +0000 (16:47 -0800)]
Input: synaptics-rmi4 - clear IRQ enables for F54
commit
549766ac2ac1f6c8bb85906bbcea759541bb19a2 upstream.
The driver for F54 just polls the status and doesn't even have a IRQ
handler registered. Make sure to disable all F54 IRQs, so we don't crash
the kernel on a nonexistent handler.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20191105114402.6009-1-l.stach@pengutronix.de
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Duggan [Tue, 5 Nov 2019 00:07:30 +0000 (16:07 -0800)]
Input: synaptics-rmi4 - do not consume more data than we have (F11, F12)
commit
5d40d95e7e64756cc30606c2ba169271704d47cb upstream.
Currently, rmi_f11_attention() and rmi_f12_attention() functions update
the attn_data data pointer and size based on the size of the expected
size of the attention data. However, if the actual valid data in the
attn buffer is less then the expected value then the updated data
pointer will point to memory beyond the end of the attn buffer. Using
the calculated valid_bytes instead will prevent this from happening.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-3-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andrew Duggan [Tue, 5 Nov 2019 00:06:44 +0000 (16:06 -0800)]
Input: synaptics-rmi4 - disable the relative position IRQ in the F12 driver
commit
f6aabe1ff1d9d7bad0879253011216438bdb2530 upstream.
This patch fixes an issue seen on HID touchpads which report finger
positions using RMI4 Function 12. The issue manifests itself as
spurious button presses as described in:
https://www.spinics.net/lists/linux-input/msg58618.html
Commit
24d28e4f1271 ("Input: synaptics-rmi4 - convert irq distribution
to irq_domain") switched the RMI4 driver to using an irq_domain to handle
RMI4 function interrupts. Functions with more then one interrupt now have
each interrupt mapped to their own IRQ and IRQ handler. The result of
this change is that the F12 IRQ handler was now getting called twice. Once
for the absolute data interrupt and once for the relative data interrupt.
For HID devices, calling rmi_f12_attention() a second time causes the
attn_data data pointer and size to be set incorrectly. When the touchpad
button is pressed, F30 will generate an interrupt and attempt to read the
F30 data from the invalid attn_data data pointer and report incorrect
button events.
This patch disables the F12 relative interrupt which prevents
rmi_f12_attention() from being called twice.
Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reported-by: Simon Wood <simon@mungewell.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191025002527.3189-2-aduggan@synaptics.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lucas Stach [Mon, 4 Nov 2019 23:58:34 +0000 (15:58 -0800)]
Input: synaptics-rmi4 - fix video buffer size
commit
003f01c780020daa9a06dea1db495b553a868c29 upstream.
The video buffer used by the queue is a vb2_v4l2_buffer, not a plain
vb2_buffer. Using the wrong type causes the allocation of the buffer
storage to be too small, causing a out of bounds write when
__init_vb2_v4l2_buffer initializes the buffer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Fixes:
3a762dbd5347 ("[media] Input: synaptics-rmi4 - add support for F54 diagnostics")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20191104114454.10500-1-l.stach@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Fri, 15 Nov 2019 19:35:05 +0000 (11:35 -0800)]
Input: ff-memless - kill timer in destroy()
commit
fa3a5a1880c91bb92594ad42dfe9eedad7996b86 upstream.
No timer must be left running when the device goes away.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Reported-and-tested-by: syzbot+b6c55daa701fc389e286@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1573726121.17351.3.camel@suse.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Fri, 8 Nov 2019 16:11:56 +0000 (16:11 +0000)]
Btrfs: fix log context list corruption after rename exchange operation
commit
e6c617102c7e4ac1398cb0b98ff1f0727755b520 upstream.
During rename exchange we might have successfully log the new name in the
source root's log tree, in which case we leave our log context (allocated
on stack) in the root's list of log contextes. However we might fail to
log the new name in the destination root, in which case we fallback to
a transaction commit later and never sync the log of the source root,
which causes the source root log context to remain in the list of log
contextes. This later causes invalid memory accesses because the context
was allocated on stack and after rename exchange finishes the stack gets
reused and overwritten for other purposes.
The kernel's linked list corruption detector (CONFIG_DEBUG_LIST=y) can
detect this and report something like the following:
[ 691.489929] ------------[ cut here ]------------
[ 691.489947] list_add corruption. prev->next should be next (
ffff88819c944530), but was
ffff8881c23f7be4. (prev=
ffff8881c23f7a38).
[ 691.489967] WARNING: CPU: 2 PID: 28933 at lib/list_debug.c:28 __list_add_valid+0x95/0xe0
(...)
[ 691.489998] CPU: 2 PID: 28933 Comm: fsstress Not tainted 5.4.0-rc6-btrfs-next-62 #1
[ 691.490001] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014
[ 691.490003] RIP: 0010:__list_add_valid+0x95/0xe0
(...)
[ 691.490007] RSP: 0018:
ffff8881f0b3faf8 EFLAGS:
00010282
[ 691.490010] RAX:
0000000000000000 RBX:
ffff88819c944530 RCX:
0000000000000000
[ 691.490011] RDX:
0000000000000001 RSI:
0000000000000008 RDI:
ffffffffa2c497e0
[ 691.490013] RBP:
ffff8881f0b3fe68 R08:
ffffed103eaa4115 R09:
ffffed103eaa4114
[ 691.490015] R10:
ffff88819c944000 R11:
ffffed103eaa4115 R12:
7fffffffffffffff
[ 691.490016] R13:
ffff8881b4035610 R14:
ffff8881e7b84728 R15:
1ffff1103e167f7b
[ 691.490019] FS:
00007f4b25ea2e80(0000) GS:
ffff8881f5500000(0000) knlGS:
0000000000000000
[ 691.490021] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 691.490022] CR2:
00007fffbb2d4eec CR3:
00000001f2a4a004 CR4:
00000000003606e0
[ 691.490025] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 691.490027] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 691.490029] Call Trace:
[ 691.490058] btrfs_log_inode_parent+0x667/0x2730 [btrfs]
[ 691.490083] ? join_transaction+0x24a/0xce0 [btrfs]
[ 691.490107] ? btrfs_end_log_trans+0x80/0x80 [btrfs]
[ 691.490111] ? dget_parent+0xb8/0x460
[ 691.490116] ? lock_downgrade+0x6b0/0x6b0
[ 691.490121] ? rwlock_bug.part.0+0x90/0x90
[ 691.490127] ? do_raw_spin_unlock+0x142/0x220
[ 691.490151] btrfs_log_dentry_safe+0x65/0x90 [btrfs]
[ 691.490172] btrfs_sync_file+0x9f1/0xc00 [btrfs]
[ 691.490195] ? btrfs_file_write_iter+0x1800/0x1800 [btrfs]
[ 691.490198] ? rcu_read_lock_any_held.part.11+0x20/0x20
[ 691.490204] ? __do_sys_newstat+0x88/0xd0
[ 691.490207] ? cp_new_stat+0x5d0/0x5d0
[ 691.490218] ? do_fsync+0x38/0x60
[ 691.490220] do_fsync+0x38/0x60
[ 691.490224] __x64_sys_fdatasync+0x32/0x40
[ 691.490228] do_syscall_64+0x9f/0x540
[ 691.490233] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 691.490235] RIP: 0033:0x7f4b253ad5f0
(...)
[ 691.490239] RSP: 002b:
00007fffbb2d6078 EFLAGS:
00000246 ORIG_RAX:
000000000000004b
[ 691.490242] RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
00007f4b253ad5f0
[ 691.490244] RDX:
00007fffbb2d5fe0 RSI:
00007fffbb2d5fe0 RDI:
0000000000000003
[ 691.490245] RBP:
000000000000000d R08:
0000000000000001 R09:
00007fffbb2d608c
[ 691.490247] R10:
00000000000002e8 R11:
0000000000000246 R12:
00000000000001f4
[ 691.490248] R13:
0000000051eb851f R14:
00007fffbb2d6120 R15:
00005635a498bda0
This started happening recently when running some test cases from fstests
like btrfs/004 for example, because support for rename exchange was added
last week to fsstress from fstests.
So fix this by deleting the log context for the source root from the list
if we have logged the new name in the source root.
Reported-by: Su Yue <Damenly_Su@gmx.com>
Fixes:
d4682ba03ef618 ("Btrfs: sync log after logging new name")
CC: stable@vger.kernel.org # 4.19+
Tested-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Thu, 14 Nov 2019 16:56:12 +0000 (17:56 +0100)]
ALSA: usb-audio: Fix incorrect size check for processing/extension units
commit
976a68f06b2ea49e2ab67a5f84919a8b105db8be upstream.
The recently introduced unit descriptor validation had some bug for
processing and extension units, it counts a bControlSize byte twice so
it expected a bigger size than it should have been. This seems
resulting in a probe error on a few devices.
Fix the calculation for proper checks of PU and EU.
Fixes:
57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Wed, 13 Nov 2019 11:12:59 +0000 (12:12 +0100)]
ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()
commit
cc9dbfa9707868fb0ca864c05e0c42d3f4d15cf2 upstream.
The commit
60849562a5db ("ALSA: usb-audio: Fix possible NULL
dereference at create_yamaha_midi_quirk()") added NULL checks in
create_yamaha_midi_quirk(), but there was an overlook. The code
allows one of either injd or outjd is NULL, but the second if check
made returning -ENODEV if any of them is NULL. Fix it in a proper
form.
Fixes:
60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()")
Reported-by: Pavel Machek <pavel@denx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Henry Lin [Wed, 13 Nov 2019 02:14:19 +0000 (10:14 +0800)]
ALSA: usb-audio: not submit urb for stopped endpoint
commit
528699317dd6dc722dccc11b68800cf945109390 upstream.
While output urb's snd_complete_urb() is executing, calling
prepare_outbound_urb() may cause endpoint stopped before
prepare_outbound_urb() returns and result in next urb submitted
to stopped endpoint. usb-audio driver cannot re-use it afterwards as
the urb is still hold by usb stack.
This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again
to let snd_complete_urb() know the endpoint already stopped and does not
submit next urb. Below kind of error will be fixed:
[ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1
[ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error
Signed-off-by: Henry Lin <henryl@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Takashi Iwai [Sat, 9 Nov 2019 18:16:58 +0000 (19:16 +0100)]
ALSA: usb-audio: Fix missing error check at mixer resolution test
commit
167beb1756791e0806365a3f86a0da10d7a327ee upstream.
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jouni Hogander [Wed, 13 Nov 2019 11:45:02 +0000 (13:45 +0200)]
slip: Fix memory leak in slip_open error path
[ Upstream commit
3b5a39979dafea9d0cd69c7ae06088f7a84cdafa ]
Driver/net/can/slcan.c is derived from slip.c. Memory leak was detected
by Syzkaller in slcan. Same issue exists in slip.c and this patch is
addressing the leak in slip.c.
Here is the slcan memory leak trace reported by Syzkaller:
BUG: memory leak unreferenced object 0xffff888067f65500 (size 4096):
comm "syz-executor043", pid 454, jiffies
4294759719 (age 11.930s)
hex dump (first 32 bytes):
73 6c 63 61 6e 30 00 00 00 00 00 00 00 00 00 00 slcan0..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<
00000000a06eec0d>] __kmalloc+0x18b/0x2c0
[<
0000000083306e66>] kvmalloc_node+0x3a/0xc0
[<
000000006ac27f87>] alloc_netdev_mqs+0x17a/0x1080
[<
0000000061a996c9>] slcan_open+0x3ae/0x9a0
[<
000000001226f0f9>] tty_ldisc_open.isra.1+0x76/0xc0
[<
0000000019289631>] tty_set_ldisc+0x28c/0x5f0
[<
000000004de5a617>] tty_ioctl+0x48d/0x1590
[<
00000000daef496f>] do_vfs_ioctl+0x1c7/0x1510
[<
0000000059068dbc>] ksys_ioctl+0x99/0xb0
[<
000000009a6eb334>] __x64_sys_ioctl+0x78/0xb0
[<
0000000053d0332e>] do_syscall_64+0x16f/0x580
[<
0000000021b83b99>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<
000000008ea75434>] 0xfffffffffffffff
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jouni Hogander <jouni.hogander@unikie.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aleksander Morgado [Wed, 13 Nov 2019 10:11:10 +0000 (11:11 +0100)]
net: usb: qmi_wwan: add support for Foxconn T77W968 LTE modules
[ Upstream commit
802753cb0b141cf5170ab97fe7e79f5ca10d06b0 ]
These are the Foxconn-branded variants of the Dell DW5821e modules,
same USB layout as those.
The QMI interface is exposed in USB configuration #1:
P: Vendor=0489 ProdID=e0b4 Rev=03.18
S: Manufacturer=FII
S: Product=T77W968 LTE
S: SerialNumber=
0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Acked-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chuhong Yuan [Fri, 15 Nov 2019 06:24:54 +0000 (14:24 +0800)]
net: gemini: add missed free_netdev
[ Upstream commit
18d647ae74116bfee38953978501cea2960a0c25 ]
This driver forgets to free allocated netdev in remove like
what is done in probe failure.
Add the free to fix it.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Guillaume Nault [Fri, 15 Nov 2019 17:29:52 +0000 (18:29 +0100)]
ipmr: Fix skb headroom in ipmr_get_route().
[ Upstream commit
7901cd97963d6cbde88fa25a4a446db3554c16c6 ]
In route.c, inet_rtm_getroute_build_skb() creates an skb with no
headroom. This skb is then used by inet_rtm_getroute() which may pass
it to rt_fill_info() and, from there, to ipmr_get_route(). The later
might try to reuse this skb by cloning it and prepending an IPv4
header. But since the original skb has no headroom, skb_push() triggers
skb_under_panic():
skbuff: skb_under_panic: text:
00000000ca46ad8a len:80 put:20 head:
00000000cd28494e data:
000000009366fd6b tail:0x3c end:0xec0 dev:veth0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:108!
invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 6 PID: 587 Comm: ip Not tainted 5.4.0-rc6+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014
RIP: 0010:skb_panic+0xbf/0xd0
Code: 41 a2 ff 8b 4b 70 4c 8b 4d d0 48 c7 c7 20 76 f5 8b 44 8b 45 bc 48 8b 55 c0 48 8b 75 c8 41 54 41 57 41 56 41 55 e8 75 dc 7a ff <0f> 0b 0f 1f 44 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00
RSP: 0018:
ffff888059ddf0b0 EFLAGS:
00010286
RAX:
0000000000000086 RBX:
ffff888060a315c0 RCX:
ffffffff8abe4822
RDX:
0000000000000000 RSI:
0000000000000008 RDI:
ffff88806c9a79cc
RBP:
ffff888059ddf118 R08:
ffffed100d9361b1 R09:
ffffed100d9361b0
R10:
ffff88805c68aee3 R11:
ffffed100d9361b1 R12:
ffff88805d218000
R13:
ffff88805c689fec R14:
000000000000003c R15:
0000000000000ec0
FS:
00007f6af184b700(0000) GS:
ffff88806c980000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
00007ffc8204a000 CR3:
0000000057b40006 CR4:
0000000000360ee0
DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
Call Trace:
skb_push+0x7e/0x80
ipmr_get_route+0x459/0x6fa
rt_fill_info+0x692/0x9f0
inet_rtm_getroute+0xd26/0xf20
rtnetlink_rcv_msg+0x45d/0x630
netlink_rcv_skb+0x1a5/0x220
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x305/0x3a0
netlink_sendmsg+0x575/0x730
sock_sendmsg+0xb5/0xc0
___sys_sendmsg+0x497/0x4f0
__sys_sendmsg+0xcb/0x150
__x64_sys_sendmsg+0x48/0x50
do_syscall_64+0xd2/0xac0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Actually the original skb used to have enough headroom, but the
reserve_skb() call was lost with the introduction of
inet_rtm_getroute_build_skb() by commit
404eb77ea766 ("ipv4: support
sport, dport and ip_proto in RTM_GETROUTE").
We could reserve some headroom again in inet_rtm_getroute_build_skb(),
but this function shouldn't be responsible for handling the special
case of ipmr_get_route(). Let's handle that directly in
ipmr_get_route() by calling skb_realloc_headroom() instead of
skb_clone().
Fixes:
404eb77ea766 ("ipv4: support sport, dport and ip_proto in RTM_GETROUTE")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Neukum [Thu, 14 Nov 2019 10:16:01 +0000 (11:16 +0100)]
ax88172a: fix information leak on short answers
[ Upstream commit
a9a51bd727d141a67b589f375fe69d0e54c4fe22 ]
If a malicious device gives a short MAC it can elicit up to
5 bytes of leaked memory out of the driver. We need to check for
ETH_ALEN instead.
Reported-by: syzbot+a8d4acdad35e6bbca308@syzkaller.appspotmail.com
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michael Schmitz [Tue, 5 Nov 2019 02:49:10 +0000 (15:49 +1300)]
scsi: core: Handle drivers which set sg_tablesize to zero
commit
9393c8de628cf0968d81a17cc11841e42191e041 upstream.
In scsi_mq_setup_tags(), cmd_size is calculated based on zero size for the
scatter-gather list in case the low level driver uses SG_NONE in its host
template.
cmd_size is passed on to the block layer for calculation of the request
size, and we've seen NULL pointer dereference errors from the block layer
in drivers where SG_NONE is used and a mq IO scheduler is active,
apparently as a consequence of this (see commit
68ab2d76e4be ("scsi:
cxlflash: Set sg_tablesize to 1 instead of SG_NONE"), and a recent patch by
Finn Thain converting the three m68k NFR5380 drivers to avoid setting
SG_NONE).
Try to avoid these errors by accounting for at least one sg list entry when
calculating cmd_size, regardless of whether the low level driver set a zero
sg_tablesize.
Tested on 030 m68k with the atari_scsi driver - setting sg_tablesize to
SG_NONE no longer results in a crash when loading this driver.
CC: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/1572922150-4358-1-git-send-email-schmitzmic@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jonas Gorski [Mon, 10 Dec 2018 11:40:38 +0000 (12:40 +0100)]
MIPS: BCM63XX: fix switch core reset on BCM6368
commit
8a38dacf87180738d42b058334c951eba15d2d47 upstream.
The Ethernet Switch core mask was set to 0, causing the switch core to
be not reset on BCM6368 on boot. Provide the proper mask so the switch
core gets reset to a known good state.
Fixes:
799faa626c71 ("MIPS: BCM63XX: add core reset helper")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: linux-mips@vger.kernel.org
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Mon, 11 Nov 2019 22:54:23 +0000 (14:54 -0800)]
KVM: x86: introduce is_pae_paging
[ Upstream commit
bf03d4f9334728bf7c8ffc7de787df48abd6340e ]
Checking for 32-bit PAE is quite common around code that fiddles with
the PDPTRs. Add a function to compress all checks into a single
invocation.
Moving to the common helper also fixes a subtle bug in kvm_set_cr3()
where it fails to check is_long_mode() and results in KVM incorrectly
attempting to load PDPTRs for a 64-bit guest.
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
[sean: backport to 4.x; handle vmx.c split in 5.x, call out the bugfix]
Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Thomas Lamprecht <t.lamprecht@proxmox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Greg Kroah-Hartman [Tue, 12 Nov 2019 18:21:46 +0000 (19:21 +0100)]
Linux 4.19.84
Junaid Shahid [Thu, 31 Oct 2019 23:14:14 +0000 (00:14 +0100)]
kvm: x86: mmu: Recovery of shattered NX large pages
commit
1aa9b9572b10529c2e64e2b8f44025d86e124308 upstream.
The page table pages corresponding to broken down large pages are zapped in
FIFO order, so that the large page can potentially be recovered, if it is
not longer being used for execution. This removes the performance penalty
for walking deeper EPT page tables.
By default, one large page will last about one hour once the guest
reaches a steady state.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junaid Shahid [Thu, 31 Oct 2019 23:14:08 +0000 (00:14 +0100)]
kvm: Add helper function for creating VM worker threads
commit
c57c80467f90e5504c8df9ad3555d2c78800bf94 upstream.
Add a function to create a kernel thread associated with a given VM. In
particular, it ensures that the worker thread inherits the priority and
cgroups of the calling thread.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Mon, 4 Nov 2019 11:22:02 +0000 (12:22 +0100)]
kvm: mmu: ITLB_MULTIHIT mitigation
commit
b8e8c8303ff28c61046a4d0f6ea99aea609a7dc0 upstream.
With some Intel processors, putting the same virtual address in the TLB
as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit
and cause the processor to issue a machine check resulting in a CPU lockup.
Unfortunately when EPT page tables use huge pages, it is possible for a
malicious guest to cause this situation.
Add a knob to mark huge pages as non-executable. When the nx_huge_pages
parameter is enabled (and we are using EPT), all huge pages are marked as
NX. If the guest attempts to execute in one of those pages, the page is
broken down into 4K pages, which are then marked executable.
This is not an issue for shadow paging (except nested EPT), because then
the host is in control of TLB flushes and the problematic situation cannot
happen. With nested EPT, again the nested guest can cause problems shadow
and direct EPT is treated in the same way.
[ tglx: Fixup default to auto and massage wording a bit ]
Originally-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Sun, 27 Oct 2019 08:36:37 +0000 (09:36 +0100)]
KVM: vmx, svm: always run with EFER.NXE=1 when shadow paging is active
commit
9167ab79936206118cc60e47dcb926c3489f3bd5 upstream.
VMX already does so if the host has SMEP, in order to support the combination of
CR0.WP=1 and CR4.SMEP=1. However, it is perfectly safe to always do so, and in
fact VMX also ends up running with EFER.NXE=1 on old processors that lack the
"load EFER" controls, because it may help avoiding a slow MSR write.
SVM does not have similar code, but it should since recent AMD processors do
support SMEP. So this patch makes the code for the two vendors simpler and
more similar, while fixing an issue with CR0.WP=1 and CR4.SMEP=1 on AMD.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Thu, 4 Jul 2019 09:14:13 +0000 (05:14 -0400)]
KVM: x86: add tracepoints around __direct_map and FNAME(fetch)
commit
335e192a3fa415e1202c8b9ecdaaecd643f823cc upstream.
These are useful in debugging shadow paging.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Sun, 30 Jun 2019 12:36:21 +0000 (08:36 -0400)]
KVM: x86: change kvm_mmu_page_get_gfn BUG_ON to WARN_ON
commit
e9f2a760b158551bfbef6db31d2cae45ab8072e5 upstream.
Note that in such a case it is quite likely that KVM will BUG_ON
in __pte_list_remove when the VM is closed. However, there is no
immediate risk of memory corruption in the host so a WARN_ON is
enough and it lets you gather traces for debugging.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Sun, 23 Jun 2019 17:15:49 +0000 (19:15 +0200)]
KVM: x86: remove now unneeded hugepage gfn adjustment
commit
d679b32611c0102ce33b9e1a4e4b94854ed1812a upstream.
After the previous patch, the low bits of the gfn are masked in
both FNAME(fetch) and __direct_map, so we do not need to clear them
in transparent_hugepage_adjust.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Mon, 24 Jun 2019 11:06:21 +0000 (13:06 +0200)]
KVM: x86: make FNAME(fetch) and __direct_map more similar
commit
3fcf2d1bdeb6a513523cb2c77012a6b047aa859c upstream.
These two functions are basically doing the same thing through
kvm_mmu_get_page, link_shadow_page and mmu_set_spte; yet, for historical
reasons, their code looks very different. This patch tries to take the
best of each and make them very similar, so that it is easy to understand
changes that apply to both of them.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junaid Shahid [Fri, 4 Jan 2019 00:22:21 +0000 (16:22 -0800)]
kvm: mmu: Do not release the page inside mmu_set_spte()
commit
43fdcda96e2550c6d1c46fb8a78801aa2f7276ed upstream.
Release the page at the call-site where it was originally acquired.
This makes the exit code cleaner for most call sites, since they
do not need to duplicate code between success and the failure
label.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Junaid Shahid [Fri, 4 Jan 2019 01:14:28 +0000 (17:14 -0800)]
kvm: Convert kvm_lock to a mutex
commit
0d9ce162cf46c99628cc5da9510b959c7976735b upstream.
It doesn't seem as if there is any particular need for kvm_lock to be a
spinlock, so convert the lock to a mutex so that sleepable functions (in
particular cond_resched()) can be called while holding it.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Fri, 11 Oct 2019 09:59:48 +0000 (11:59 +0200)]
kvm: x86, powerpc: do not allow clearing largepages debugfs entry
commit
833b45de69a6016c4b0cebe6765d526a31a81580 upstream.
The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed. Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: kvm-ppc@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Gomez Iglesias, Antonio [Mon, 4 Nov 2019 11:22:03 +0000 (12:22 +0100)]
Documentation: Add ITLB_MULTIHIT documentation
commit
7f00cc8d4a51074eb0ad4c3f16c15757b1ddfb7d upstream.
Add the initial ITLB_MULTIHIT documentation.
[ tglx: Add it to the index so it gets actually built. ]
Signed-off-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com>
Signed-off-by: Nelson D'Souza <nelson.dsouza@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tyler Hicks [Mon, 4 Nov 2019 11:22:02 +0000 (12:22 +0100)]
cpu/speculation: Uninline and export CPU mitigations helpers
commit
731dc9df975a5da21237a18c3384f811a7a41cc6 upstream.
A kernel module may need to check the value of the "mitigations=" kernel
command line parameter as part of its setup when the module needs
to perform software mitigations for a CPU flaw.
Uninline and export the helper functions surrounding the cpu_mitigations
enum to allow for their usage from a module.
Lastly, privatize the enum and cpu_mitigations variable since the value of
cpu_mitigations can be checked with the exported helper functions.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Mon, 4 Nov 2019 11:22:01 +0000 (12:22 +0100)]
x86/cpu: Add Tremont to the cpu vulnerability whitelist
commit
cad14885a8d32c1c0d8eaa7bf5c0152a22b6080e upstream.
Add the new cpu family ATOM_TREMONT_D to the cpu vunerability
whitelist. ATOM_TREMONT_D is not affected by X86_BUG_ITLB_MULTIHIT.
ATOM_TREMONT_D might have mitigations against other issues as well, but
only the ITLB multihit mitigation is confirmed at this point.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vineela Tummalapalli [Mon, 4 Nov 2019 11:22:01 +0000 (12:22 +0100)]
x86/bugs: Add ITLB_MULTIHIT bug infrastructure
commit
db4d30fbb71b47e4ecb11c4efa5d8aad4b03dfae upstream.
Some processors may incur a machine check error possibly resulting in an
unrecoverable CPU lockup when an instruction fetch encounters a TLB
multi-hit in the instruction TLB. This can occur when the page size is
changed along with either the physical address or cache type. The relevant
erratum can be found here:
https://bugzilla.kernel.org/show_bug.cgi?id=205195
There are other processors affected for which the erratum does not fully
disclose the impact.
This issue affects both bare-metal x86 page tables and EPT.
It can be mitigated by either eliminating the use of large pages or by
using careful TLB invalidations when changing the page size in the page
tables.
Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in
MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which
are mitigated against this issue.
Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com>
Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Josh Poimboeuf [Thu, 7 Nov 2019 02:26:46 +0000 (20:26 -0600)]
x86/speculation/taa: Fix printing of TAA_MSG_SMT on IBRS_ALL CPUs
commit
012206a822a8b6ac09125bfaa210a95b9eb8f1c1 upstream.
For new IBRS_ALL CPUs, the Enhanced IBRS check at the beginning of
cpu_bugs_smt_update() causes the function to return early, unintentionally
skipping the MDS and TAA logic.
This is not a problem for MDS, because there appears to be no overlap
between IBRS_ALL and MDS-affected CPUs. So the MDS mitigation would be
disabled and nothing would need to be done in this function anyway.
But for TAA, the TAA_MSG_SMT string will never get printed on Cascade
Lake and newer.
The check is superfluous anyway: when 'spectre_v2_enabled' is
SPECTRE_V2_IBRS_ENHANCED, 'spectre_v2_user' is always
SPECTRE_V2_USER_NONE, and so the 'spectre_v2_user' switch statement
handles it appropriately by doing nothing. So just remove the check.
Fixes:
1b42f017415b ("x86/speculation/taa: Add mitigation for TSX Async Abort")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Wed, 23 Oct 2019 10:35:50 +0000 (12:35 +0200)]
x86/tsx: Add config options to set tsx=on|off|auto
commit
db616173d787395787ecc93eef075fa975227b10 upstream.
There is a general consensus that TSX usage is not largely spread while
the history shows there is a non trivial space for side channel attacks
possible. Therefore the tsx is disabled by default even on platforms
that might have a safe implementation of TSX according to the current
knowledge. This is a fair trade off to make.
There are, however, workloads that really do benefit from using TSX and
updating to a newer kernel with TSX disabled might introduce a
noticeable regressions. This would be especially a problem for Linux
distributions which will provide TAA mitigations.
Introduce config options X86_INTEL_TSX_MODE_OFF, X86_INTEL_TSX_MODE_ON
and X86_INTEL_TSX_MODE_AUTO to control the TSX feature. The config
setting can be overridden by the tsx cmdline options.
[ bp: Text cleanups from Josh. ]
Suggested-by: Borislav Petkov <bpetkov@suse.de>
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 10:32:55 +0000 (12:32 +0200)]
x86/speculation/taa: Add documentation for TSX Async Abort
commit
a7a248c593e4fd7a67c50b5f5318fe42a0db335e upstream.
Add the documenation for TSX Async Abort. Include the description of
the issue, how to check the mitigation state, control the mitigation,
guidance for system administrators.
[ bp: Add proper SPDX tags, touch ups by Josh and me. ]
Co-developed-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com>
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Antonio Gomez Iglesias <antonio.gomez.iglesias@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 10:28:57 +0000 (12:28 +0200)]
x86/tsx: Add "auto" option to the tsx= cmdline parameter
commit
7531a3596e3272d1f6841e0d601a614555dc6b65 upstream.
Platforms which are not affected by X86_BUG_TAA may want the TSX feature
enabled. Add "auto" option to the TSX cmdline parameter. When tsx=auto
disable TSX when X86_BUG_TAA is present, otherwise enable TSX.
More details on X86_BUG_TAA can be found here:
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html
[ bp: Extend the arg buffer to accommodate "auto\0". ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 10:23:33 +0000 (12:23 +0200)]
kvm/x86: Export MDS_NO=0 to guests when TSX is enabled
commit
e1d38b63acd843cfdd4222bf19a26700fd5c699e upstream.
Export the IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0 to guests on TSX
Async Abort(TAA) affected hosts that have TSX enabled and updated
microcode. This is required so that the guests don't complain,
"Vulnerable: Clear CPU buffers attempted, no microcode"
when the host has the updated microcode to clear CPU buffers.
Microcode update also adds support for MSR_IA32_TSX_CTRL which is
enumerated by the ARCH_CAP_TSX_CTRL bit in IA32_ARCH_CAPABILITIES MSR.
Guests can't do this check themselves when the ARCH_CAP_TSX_CTRL bit is
not exported to the guests.
In this case export MDS_NO=0 to the guests. When guests have
CPUID.MD_CLEAR=1, they deploy MDS mitigation which also mitigates TAA.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 10:19:51 +0000 (12:19 +0200)]
x86/speculation/taa: Add sysfs reporting for TSX Async Abort
commit
6608b45ac5ecb56f9e171252229c39580cc85f0f upstream.
Add the sysfs reporting file for TSX Async Abort. It exposes the
vulnerability and the mitigation state similar to the existing files for
the other hardware vulnerabilities.
Sysfs file path is:
/sys/devices/system/cpu/vulnerabilities/tsx_async_abort
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 09:30:45 +0000 (11:30 +0200)]
x86/speculation/taa: Add mitigation for TSX Async Abort
commit
1b42f017415b46c317e71d41c34ec088417a1883 upstream.
TSX Async Abort (TAA) is a side channel vulnerability to the internal
buffers in some Intel processors similar to Microachitectural Data
Sampling (MDS). In this case, certain loads may speculatively pass
invalid data to dependent operations when an asynchronous abort
condition is pending in a TSX transaction.
This includes loads with no fault or assist condition. Such loads may
speculatively expose stale data from the uarch data structures as in
MDS. Scope of exposure is within the same-thread and cross-thread. This
issue affects all current processors that support TSX, but do not have
ARCH_CAP_TAA_NO (bit 8) set in MSR_IA32_ARCH_CAPABILITIES.
On CPUs which have their IA32_ARCH_CAPABILITIES MSR bit MDS_NO=0,
CPUID.MD_CLEAR=1 and the MDS mitigation is clearing the CPU buffers
using VERW or L1D_FLUSH, there is no additional mitigation needed for
TAA. On affected CPUs with MDS_NO=1 this issue can be mitigated by
disabling the Transactional Synchronization Extensions (TSX) feature.
A new MSR IA32_TSX_CTRL in future and current processors after a
microcode update can be used to control the TSX feature. There are two
bits in that MSR:
* TSX_CTRL_RTM_DISABLE disables the TSX sub-feature Restricted
Transactional Memory (RTM).
* TSX_CTRL_CPUID_CLEAR clears the RTM enumeration in CPUID. The other
TSX sub-feature, Hardware Lock Elision (HLE), is unconditionally
disabled with updated microcode but still enumerated as present by
CPUID(EAX=7).EBX{bit4}.
The second mitigation approach is similar to MDS which is clearing the
affected CPU buffers on return to user space and when entering a guest.
Relevant microcode update is required for the mitigation to work. More
details on this approach can be found here:
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html
The TSX feature can be controlled by the "tsx" command line parameter.
If it is force-enabled then "Clear CPU buffers" (MDS mitigation) is
deployed. The effective mitigation state can be read from sysfs.
[ bp:
- massage + comments cleanup
- s/TAA_MITIGATION_TSX_DISABLE/TAA_MITIGATION_TSX_DISABLED/g - Josh.
- remove partial TAA mitigation in update_mds_branch_idle() - Josh.
- s/tsx_async_abort_cmdline/tsx_async_abort_parse_cmdline/g
]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 09:01:53 +0000 (11:01 +0200)]
x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default
commit
95c5824f75f3ba4c9e8e5a4b1a623c95390ac266 upstream.
Add a kernel cmdline parameter "tsx" to control the Transactional
Synchronization Extensions (TSX) feature. On CPUs that support TSX
control, use "tsx=on|off" to enable or disable TSX. Not specifying this
option is equivalent to "tsx=off". This is because on certain processors
TSX may be used as a part of a speculative side channel attack.
Carve out the TSX controlling functionality into a separate compilation
unit because TSX is a CPU feature while the TSX async abort control
machinery will go to cpu/bugs.c.
[ bp: - Massage, shorten and clear the arg buffer.
- Clarifications of the tsx= possible options - Josh.
- Expand on TSX_CTRL availability - Pawan. ]
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 08:52:35 +0000 (10:52 +0200)]
x86/cpu: Add a helper function x86_read_arch_cap_msr()
commit
286836a70433fb64131d2590f4bf512097c255e1 upstream.
Add a helper function to read the IA32_ARCH_CAPABILITIES MSR.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pawan Gupta [Wed, 23 Oct 2019 08:45:50 +0000 (10:45 +0200)]
x86/msr: Add the IA32_TSX_CTRL MSR
commit
c2955f270a84762343000f103e0640d29c7a96f3 upstream.
Transactional Synchronization Extensions (TSX) may be used on certain
processors as part of a speculative side channel attack. A microcode
update for existing processors that are vulnerable to this attack will
add a new MSR - IA32_TSX_CTRL to allow the system administrator the
option to disable TSX as one of the possible mitigations.
The CPUs which get this new MSR after a microcode upgrade are the ones
which do not set MSR_IA32_ARCH_CAPABILITIES.MDS_NO (bit 5) because those
CPUs have CPUID.MD_CLEAR, i.e., the VERW implementation which clears all
CPU buffers takes care of the TAA case as well.
[ Note that future processors that are not vulnerable will also
support the IA32_TSX_CTRL MSR. ]
Add defines for the new IA32_TSX_CTRL MSR and its bits.
TSX has two sub-features:
1. Restricted Transactional Memory (RTM) is an explicitly-used feature
where new instructions begin and end TSX transactions.
2. Hardware Lock Elision (HLE) is implicitly used when certain kinds of
"old" style locks are used by software.
Bit 7 of the IA32_ARCH_CAPABILITIES indicates the presence of the
IA32_TSX_CTRL MSR.
There are two control bits in IA32_TSX_CTRL MSR:
Bit 0: When set, it disables the Restricted Transactional Memory (RTM)
sub-feature of TSX (will force all transactions to abort on the
XBEGIN instruction).
Bit 1: When set, it disables the enumeration of the RTM and HLE feature
(i.e. it will make CPUID(EAX=7).EBX{bit4} and
CPUID(EAX=7).EBX{bit11} read as 0).
The other TSX sub-feature, Hardware Lock Elision (HLE), is
unconditionally disabled by the new microcode but still enumerated
as present by CPUID(EAX=7).EBX{bit4}, unless disabled by
IA32_TSX_CTRL_MSR[1] - TSX_CTRL_CPUID_CLEAR.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Neelima Krishnan <neelima.krishnan@intel.com>
Reviewed-by: Mark Gross <mgross@linux.intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Paolo Bonzini [Mon, 19 Aug 2019 15:24:07 +0000 (17:24 +0200)]
KVM: x86: use Intel speculation bugs and features as derived in generic x86 code
commit
0c54914d0c52a15db9954a76ce80fee32cf318f4 upstream.
Similar to AMD bits, set the Intel bits from the vendor-independent
feature and bug flags, because KVM_GET_SUPPORTED_CPUID does not care
about the vendor and they should be set on AMD processors as well.
Suggested-by: Jim Mattson <jmattson@google.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ben Hutchings [Mon, 11 Nov 2019 16:13:24 +0000 (08:13 -0800)]
drm/i915/cmdparser: Fix jump whitelist clearing
commit
ea0b163b13ffc52818c079adb00d55e227a6da6f upstream.
When a jump_whitelist bitmap is reused, it needs to be cleared.
Currently this is done with memset() and the size calculation assumes
bitmaps are made of 32-bit words, not longs. So on 64-bit
architectures, only the first half of the bitmap is cleared.
If some whitelist bits are carried over between successive batches
submitted on the same context, this will presumably allow embedding
the rogue instructions that we're trying to reject.
Use bitmap_zero() instead, which gets the calculation right.
Fixes:
f8c08d8faee5 ("drm/i915/cmdparser: Add support for backward jumps")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Imre Deak [Mon, 9 Jul 2018 15:24:27 +0000 (18:24 +0300)]
drm/i915/gen8+: Add RC6 CTX corruption WA
commit
7e34f4e4aad3fd34c02b294a3cf2321adf5b4438 upstream.
In some circumstances the RC6 context can get corrupted. We can detect
this and take the required action, that is disable RC6 and runtime PM.
The HW recovers from the corrupted state after a system suspend/resume
cycle, so detect the recovery and re-enable RC6 and runtime PM.
v2: rebase (Mika)
v3:
- Move intel_suspend_gt_powersave() to the end of the GEM suspend
sequence.
- Add commit message.
v4:
- Rebased on intel_uncore_forcewake_put(i915->uncore, ...) API
change.
v5: rebased on gem/gt split (Mika)
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Uma Shankar [Tue, 7 Aug 2018 15:45:35 +0000 (21:15 +0530)]
drm/i915: Lower RM timeout to avoid DSI hard hangs
commit
1d85a299c4db57c55e0229615132c964d17aa765 upstream.
In BXT/APL, device 2 MMIO reads from MIPI controller requires its PLL
to be turned ON. When MIPI PLL is turned off (MIPI Display is not
active or connected), and someone (host or GT engine) tries to read
MIPI registers, it causes hard hang. This is a hardware restriction
or limitation.
Driver by itself doesn't read MIPI registers when MIPI display is off.
But any userspace application can submit unprivileged batch buffer for
execution. In that batch buffer there can be mmio reads. And these
reads are allowed even for unprivileged applications. If these
register reads are for MIPI DSI controller and MIPI display is not
active during that time, then the MMIO read operation causes system
hard hang and only way to recover is hard reboot. A genuine
process/application won't submit batch buffer like this and doesn't
cause any issue. But on a compromised system, a malign userspace
process/app can generate such batch buffer and can trigger system
hard hang (denial of service attack).
The fix is to lower the internal MMIO timeout value to an optimum
value of 950us as recommended by hardware team. If the timeout is
beyond 1ms (which will hit for any value we choose if MMIO READ on a
DSI specific register is performed without PLL ON), it causes the
system hang. But if the timeout value is lower than it will be below
the threshold (even if timeout happens) and system will not get into
a hung state. This will avoid a system hang without losing any
programming or GT interrupts, taking the worst case of lowest CDCLK
frequency and early DC5 abort into account.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Thu, 20 Sep 2018 16:45:10 +0000 (09:45 -0700)]
drm/i915/cmdparser: Ignore Length operands during command matching
commit
926abff21a8f29ef159a3ac893b05c6e50e043c3 upstream.
Some of the gen instruction macros (e.g. MI_DISPLAY_FLIP) have the
length directly encoded in them. Since these are used directly in
the tables, the Length becomes part of the comparison used for
matching during parsing. Thus, if the cmd being parsed has a
different length to that in the table, it is not matched and the
cmd is accepted via the default variable length path.
Fix by masking out everything except the Opcode in the cmd tables
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Thu, 20 Sep 2018 16:58:36 +0000 (09:58 -0700)]
drm/i915/cmdparser: Add support for backward jumps
commit
f8c08d8faee5567803c8c533865296ca30286bbf upstream.
To keep things manageable, the pre-gen9 cmdparser does not
attempt to track any form of nested BB_START's. This did not
prevent usermode from using nested starts, or even chained
batches because the cmdparser is not strictly enforced pre gen9.
Instead, the existence of a nested BB_START would cause the batch
to be emitted in insecure mode, and any privileged capabilities
would not be available.
For Gen9, the cmdparser becomes mandatory (for BCS at least), and
so not providing any form of nested BB_START support becomes
overly restrictive. Any such batch will simply not run.
We make heavy use of backward jumps in igt, and it is much easier
to add support for this restricted subset of nested jumps, than to
rewrite the whole of our test suite to avoid them.
Add the required logic to support limited backward jumps, to
instructions that have already been validated by the parser.
Note that it's not sufficient to simply approve any BB_START
that jumps backwards in the buffer because this would allow an
attacker to embed a rogue instruction sequence within the
operand words of a harmless instruction (say LRI) and jump to
that.
We introduce a bit array to track every instr offset successfully
validated, and test the target of BB_START against this. If the
target offset hits, it is re-written to the same offset in the
shadow buffer and the BB_START cmd is allowed.
Note: This patch deliberately ignores checkpatch issues in the
cmdtables, in order to match the style of the surrounding code.
We'll correct the entire file in one go in a later patch.
v2: set dispatch secure late (Mika)
v3: rebase (Mika)
v4: Clear whitelist on each parse
Minor review updates (Chris)
v5: Correct backward jump batching
v6: fix compilation error due to struct eb shuffle (Mika)
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Thu, 27 Sep 2018 17:23:17 +0000 (10:23 -0700)]
drm/i915/cmdparser: Use explicit goto for error paths
commit
0546a29cd884fb8184731c79ab008927ca8859d0 upstream.
In the next patch we will be adding a second valid
termination condition which will require a small
amount of refactoring to share logic with the BB_END
case.
Refactor all error conditions to jump to a dedicated
exit path, with 'break' reserved only for a successful
parse.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Mon, 23 Apr 2018 18:12:15 +0000 (11:12 -0700)]
drm/i915: Add gen9 BCS cmdparsing
commit
0f2f39758341df70202ae1c42d5a1e4ee392b6d3 upstream.
For gen9 we enable cmdparsing on the BCS ring, specifically
to catch inadvertent accesses to sensitive registers
Unlike gen7/hsw, we use the parser only to block certain
registers. We can rely on h/w to block restricted commands,
so the command tables only provide enough info to allow the
parser to delineate each command, and identify commands that
access registers.
Note: This patch deliberately ignores checkpatch issues in
favour of matching the style of the surrounding code. We'll
correct the entire file in one go in a later patch.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Wed, 1 Aug 2018 16:45:50 +0000 (09:45 -0700)]
drm/i915: Allow parsing of unsized batches
commit
435e8fc059dbe0eec823a75c22da2972390ba9e0 upstream.
In "drm/i915: Add support for mandatory cmdparsing" we introduced the
concept of mandatory parsing. This allows the cmdparser to be invoked
even when user passes batch_len=0 to the execbuf ioctl's.
However, the cmdparser needs to know the extents of the buffer being
scanned. Refactor the code to ensure the cmdparser uses the actual
object size, instead of the incoming length, if user passes 0.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Tue, 22 May 2018 20:59:06 +0000 (13:59 -0700)]
drm/i915: Support ro ppgtt mapped cmdparser shadow buffers
commit
4f7af1948abcb18b4772fe1bcd84d7d27d96258c upstream.
For Gen7, the original cmdparser motive was to permit limited
use of register read/write instructions in unprivileged BB's.
This worked by copying the user supplied bb to a kmd owned
bb, and running it in secure mode, from the ggtt, only if
the scanner finds no unsafe commands or registers.
For Gen8+ we can't use this same technique because running bb's
from the ggtt also disables access to ppgtt space. But we also
do not actually require 'secure' execution since we are only
trying to reduce the available command/register set. Instead we
will copy the user buffer to a kmd owned read-only bb in ppgtt,
and run in the usual non-secure mode.
Note that ro pages are only supported by ppgtt (not ggtt), but
luckily that's exactly what we need.
Add the required paths to map the shadow buffer to ppgtt ro for Gen8+
v2: IS_GEN7/IS_GEN (Mika)
v3: rebase
v4: rebase
v5: rebase
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Wed, 1 Aug 2018 16:33:59 +0000 (09:33 -0700)]
drm/i915: Add support for mandatory cmdparsing
commit
311a50e76a33d1e029563c24b2ff6db0c02b5afe upstream.
The existing cmdparser for gen7 can be bypassed by specifying
batch_len=0 in the execbuf call. This is safe because bypassing
simply reduces the cmd-set available.
In a later patch we will introduce cmdparsing for gen9, as a
security measure, which must be strictly enforced since without
it we are vulnerable to DoS attacks.
Introduce the concept of 'required' cmd parsing that cannot be
bypassed by submitting zero-length bb's.
v2: rebase (Mika)
v2: rebase (Mika)
v3: fix conflict on engine flags (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Fri, 8 Jun 2018 17:05:26 +0000 (10:05 -0700)]
drm/i915: Remove Master tables from cmdparser
commit
66d8aba1cd6db34af10de465c0d52af679288cb6 upstream.
The previous patch has killed support for secure batches
on gen6+, and hence the cmdparsers master tables are
now dead code. Remove them.
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Fri, 8 Jun 2018 15:53:46 +0000 (08:53 -0700)]
drm/i915: Disable Secure Batches for gen6+
commit
44157641d448cbc0c4b73c5231d2b911f0cb0427 upstream.
Retroactively stop reporting support for secure batches
through the api for gen6+ so that older binaries trigger
the fallback path instead.
Older binaries use secure batches pre gen6 to access resources
that are not available to normal usermode processes. However,
all known userspace explicitly checks for HAS_SECURE_BATCHES
before relying on the secure batch feature.
Since there are no known binaries relying on this for newer gens
we can kill secure batches from gen6, via I915_PARAM_HAS_SECURE_BATCHES.
v2: rebase (Mika)
v3: rebase (Mika)
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jon Bloomfield [Fri, 20 Apr 2018 21:26:01 +0000 (14:26 -0700)]
drm/i915: Rename gen7 cmdparser tables
commit
0a2f661b6c21815a7fa60e30babe975fee8e73c6 upstream.
We're about to introduce some new tables for later gens, and the
current naming for the gen7 tables will no longer make sense.
v2: rebase
Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tyler Hicks <tyhicks@canonical.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Chris Wilson <chris.p.wilson@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stefano Garzarella [Fri, 8 Nov 2019 16:08:50 +0000 (17:08 +0100)]
vsock/virtio: fix sock refcnt holding during the shutdown
[ Upstream commit
ad8a7220355d39cddce8eac1cea9677333e8b821 ]
The "
42f5cda5eaf4" commit rightly set SOCK_DONE on peer shutdown,
but there is an issue if we receive the SHUTDOWN(RDWR) while the
virtio_transport_close_timeout() is scheduled.
In this case, when the timeout fires, the SOCK_DONE is already
set and the virtio_transport_close_timeout() will not call
virtio_transport_reset() and virtio_transport_do_close().
This causes that both sockets remain open and will never be released,
preventing the unloading of [virtio|vhost]_transport modules.
This patch fixes this issue, calling virtio_transport_reset() and
virtio_transport_do_close() when we receive the SHUTDOWN(RDWR)
and there is nothing left to read.
Fixes:
42f5cda5eaf4 ("vsock/virtio: set SOCK_DONE on peer shutdown")
Cc: Stephen Barber <smbarber@chromium.org>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Steve Moskovchenko [Wed, 3 Apr 2019 06:28:56 +0000 (23:28 -0700)]
iio: imu: mpu6050: Fix FIFO layout for ICM20602
[ Upstream commit
1615fe41a1959a2ee2814ba62736b2bb54e9802a ]
The MPU6050 driver has recently gained support for the
ICM20602 IMU, which is very similar to MPU6xxx. However,
the ICM20602's FIFO data specifically includes temperature
readings, which were not present on MPU6xxx parts. As a
result, the driver will under-read the ICM20602's FIFO
register, causing the same (partial) sample to be returned
for all reads, until the FIFO overflows.
Fix this by adding a table of scan elements specifically
for the ICM20602, which takes the extra temperature data
into consideration.
While we're at it, fix the temperature offset and scaling
on ICM20602, since it uses different scale/offset constants
than the rest of the MPU6xxx devices.
Signed-off-by: Steve Moskovchenko <stevemo@skydio.com>
Fixes:
22904bdff978 ("iio: imu: mpu6050: Add support for the ICM 20602 IMU")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Eric Dumazet [Tue, 5 Nov 2019 05:38:43 +0000 (21:38 -0800)]
net: prevent load/store tearing on sk->sk_stamp
[ Upstream commit
f75359f3ac855940c5718af10ba089b8977bf339 ]
Add a couple of READ_ONCE() and WRITE_ONCE() to prevent
load-tearing and store-tearing in sock_read_timestamp()
and sock_write_timestamp()
This might prevent another KCSAN report.
Fixes:
3a0ed3e96197 ("sock: Make sock->sk_stamp thread-safe")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Deepa Dinamani <deepa.kernel@gmail.com>
Acked-by: Deepa Dinamani <deepa.kernel@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Stefano Brivio [Thu, 10 Oct 2019 17:18:14 +0000 (19:18 +0200)]
netfilter: ipset: Copy the right MAC address in hash:ip,mac IPv6 sets
[ Upstream commit
97664bc2c77e2b65cdedddcae2643fc93291d958 ]
Same as commit
1b4a75108d5b ("netfilter: ipset: Copy the right MAC
address in bitmap:ip,mac and hash:ip,mac sets"), another copy and paste
went wrong in commit
8cc4ccf58379 ("netfilter: ipset: Allow matching on
destination MAC address for mac and ipmac sets").
When I fixed this for IPv4 in
1b4a75108d5b, I didn't realise that
hash:ip,mac sets also support IPv6 as family, and this is covered by a
separate function, hash_ipmac6_kadt().
In hash:ip,mac sets, the first dimension is the IP address, and the
second dimension is the MAC address: check the IPSET_DIM_TWO_SRC flag
in flags while deciding which MAC address to copy, destination or
source.
This way, mixing source and destination matches for the two dimensions
of ip,mac hash type works as expected, also for IPv6. With this setup:
ip netns add A
ip link add veth1 type veth peer name veth2 netns A
ip addr add 2001:db8::1/64 dev veth1
ip -net A addr add 2001:db8::2/64 dev veth2
ip link set veth1 up
ip -net A link set veth2 up
dst=$(ip netns exec A cat /sys/class/net/veth2/address)
ip netns exec A ipset create test_hash hash:ip,mac family inet6
ip netns exec A ipset add test_hash 2001:db8::1,${dst}
ip netns exec A ip6tables -A INPUT -p icmpv6 --icmpv6-type 135 -j ACCEPT
ip netns exec A ip6tables -A INPUT -m set ! --match-set test_hash src,dst -j DROP
ipset now correctly matches a test packet:
# ping -c1 2001:db8::2 >/dev/null
# echo $?
0
Reported-by: Chen, Yi <yiche@redhat.com>
Fixes:
8cc4ccf58379 ("netfilter: ipset: Allow matching on destination MAC address for mac and ipmac sets")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Suwan Kim [Tue, 22 Oct 2019 09:30:17 +0000 (18:30 +0900)]
usbip: Fix free of unallocated memory in vhci tx
[ Upstream commit
d4d8257754c3300ea2a465dadf8d2b02c713c920 ]
iso_buffer should be set to NULL after use and free in the while loop.
In the case of isochronous URB in the while loop, iso_buffer is
allocated and after sending it to server, buffer is deallocated. And
then, if the next URB in the while loop is not a isochronous pipe,
iso_buffer still holds the previously deallocated buffer address and
kfree tries to free wrong buffer address.
Fixes:
ea44d190764b ("usbip: Implement SG support to vhci-hcd and stub driver")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Suwan Kim <suwan.kim027@gmail.com>
Reviewed-by: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191022093017.8027-1-suwan.kim027@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Fri, 8 Nov 2019 20:18:29 +0000 (12:18 -0800)]
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
commit
65de03e251382306a4575b1779c57c87889eee49 upstream.
cgroup writeback tries to refresh the associated wb immediately if the
current wb is dead. This is to avoid keeping issuing IOs on the stale
wb after memcg - blkcg association has changed (ie. when blkcg got
disabled / enabled higher up in the hierarchy).
Unfortunately, the logic gets triggered spuriously on inodes which are
associated with dead cgroups. When the logic is triggered on dead
cgroups, the attempt fails only after doing quite a bit of work
allocating and initializing a new wb.
While
c3aab9a0bd91 ("mm/filemap.c: don't initiate writeback if mapping
has no dirty pages") alleviated the issue significantly as it now only
triggers when the inode has dirty pages. However, the condition can
still be triggered before the inode is switched to a different cgroup
and the logic simply doesn't make sense.
Skip the immediate switching if the associated memcg is dying.
This is a simplified version of the following two patches:
* https://lore.kernel.org/linux-mm/
20190513183053.GA73423@dennisz-mbp/
* http://lkml.kernel.org/r/
156355839560.2063.
5265687291430814589.stgit@buzz
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Fixes:
e8a7abf5a5bd ("writeback: disassociate inodes from dying bdi_writebacks")
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Konstantin Khlebnikov [Mon, 23 Sep 2019 22:34:45 +0000 (15:34 -0700)]
mm/filemap.c: don't initiate writeback if mapping has no dirty pages
commit
c3aab9a0bd91b696a852169479b7db1ece6cbf8c upstream.
Functions like filemap_write_and_wait_range() should do nothing if inode
has no dirty pages or pages currently under writeback. But they anyway
construct struct writeback_control and this does some atomic operations if
CONFIG_CGROUP_WRITEBACK=y - on fast path it locks inode->i_lock and
updates state of writeback ownership, on slow path might be more work.
Current this path is safely avoided only when inode mapping has no pages.
For example generic_file_read_iter() calls filemap_write_and_wait_range()
at each O_DIRECT read - pretty hot path.
This patch skips starting new writeback if mapping has no dirty tags set.
If writeback is already in progress filemap_write_and_wait_range() will
wait for it.
Link: http://lkml.kernel.org/r/156378816804.1087.8607636317907921438.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Baptiste Maneyrol [Wed, 16 Oct 2019 14:43:28 +0000 (14:43 +0000)]
iio: imu: inv_mpu6050: fix no data on MPU6050
[ Upstream commit
6e82ae6b8d11b948b74e71396efd8e074c415f44 ]
Some chips have a fifo overflow bit issue where the bit is always
set. The result is that every data is dropped.
Change fifo overflow management by checking fifo count against
a maximum value.
Add fifo size in chip hardware set of values.
Fixes:
f5057e7b2dba ("iio: imu: inv_mpu6050: better fifo overflow handling")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Randolph Maaßen [Mon, 28 Jan 2019 18:50:03 +0000 (19:50 +0100)]
iio: imu: mpu6050: Add support for the ICM 20602 IMU
[ Upstream commit
22904bdff97839960bd98b3452a583b1daee628b ]
The Invensense ICM-20602 is a 6-axis MotionTracking device that
combines a 3-axis gyroscope and an 3-axis accelerometer. It is very
similar to the ICM-20608 imu which is already supported by the mpu6050
driver. The main difference is that the ICM-20602 has the i2c bus
disable bit in a separate register.
Signed-off-by: Randolph Maaßen <gaireg@gaireg.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Tejun Heo [Tue, 5 Nov 2019 16:09:51 +0000 (08:09 -0800)]
blkcg: make blkcg_print_stat() print stats only for online blkgs
[ Upstream commit
b0814361a25cba73a224548843ed92d8ea78715a ]
blkcg_print_stat() iterates blkgs under RCU and doesn't test whether
the blkg is online. This can call into pd_stat_fn() on a pd which is
still being initialized leading to an oops.
The heaviest operation - recursively summing up rwstat counters - is
already done while holding the queue_lock. Expand queue_lock to cover
the other operations and skip the blkg if it isn't online yet. The
online state is protected by both blkcg and queue locks, so this
guarantees that only online blkgs are processed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Roman Gushchin <guro@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Fixes:
903d23f0a354 ("blk-cgroup: allow controllers to output their own stats")
Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Hans de Goede [Fri, 18 Oct 2019 09:08:42 +0000 (11:08 +0200)]
pinctrl: cherryview: Fix irq_valid_mask calculation
[ Upstream commit
63bdef6cd6941917c823b9cc9aa0219d19fcb716 ]
Commit
03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux
GPIO translation") has made the cherryview gpio numbers sparse, to get
a 1:1 mapping between ACPI pin numbers and gpio numbers in Linux.
This has greatly simplified things, but the code setting the
irq_valid_mask was not updated for this, so the valid mask is still in
the old "compressed" numbering with the gaps in the pin numbers skipped,
which is wrong as irq_valid_mask needs to be expressed in gpio numbers.
This results in the following error on devices using pin 24 (0x0018) on
the north GPIO controller as an ACPI event source:
[ 0.422452] cherryview-pinctrl INT33FF:01: Failed to translate GPIO to IRQ
This has been reported (by email) to be happening on a Caterpillar CAT T20
tablet and I've reproduced this myself on a Medion Akoya e2215t 2-in-1.
This commit uses the pin number instead of the compressed index into
community->pins to clear the correct bits in irq_valid_mask for GPIOs
using GPEs for interrupts, fixing these errors and in case of the
Medion Akoya e2215t also fixing the LID switch not working.
Cc: stable@vger.kernel.org
Fixes:
03c4749dd6c7 ("gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Shuning Zhang [Wed, 6 Nov 2019 05:16:34 +0000 (21:16 -0800)]
ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()
[ Upstream commit
e74540b285569d2b1e14fe7aee92297078f235ce ]
When the extent tree is modified, it should be protected by inode
cluster lock and ip_alloc_sem.
The extent tree is accessed and modified in the
ocfs2_prepare_inode_for_write, but isn't protected by ip_alloc_sem.
The following is a case. The function ocfs2_fiemap is accessing the
extent tree, which is modified at the same time.
kernel BUG at fs/ocfs2/extent_map.c:475!
invalid opcode: 0000 [#1] SMP
Modules linked in: tun ocfs2 ocfs2_nodemanager configfs ocfs2_stackglue [...]
CPU: 16 PID: 14047 Comm: o2info Not tainted 4.1.12-124.23.1.el6uek.x86_64 #2
Hardware name: Oracle Corporation ORACLE SERVER X7-2L/ASM, MB MECH, X7-2L, BIOS
42040600 10/19/2018
task:
ffff88019487e200 ti:
ffff88003daa4000 task.ti:
ffff88003daa4000
RIP: ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
Call Trace:
ocfs2_fiemap+0x1e3/0x430 [ocfs2]
do_vfs_ioctl+0x155/0x510
SyS_ioctl+0x81/0xa0
system_call_fastpath+0x18/0xd8
Code: 18 48 c7 c6 60 7f 65 a0 31 c0 bb e2 ff ff ff 48 8b 4a 40 48 8b 7a 28 48 c7 c2 78 2d 66 a0 e8 38 4f 05 00 e9 28 fe ff ff 0f 1f 00 <0f> 0b 66 0f 1f 44 00 00 bb 86 ff ff ff e9 13 fe ff ff 66 0f 1f
RIP ocfs2_get_clusters_nocache.isra.11+0x390/0x550 [ocfs2]
---[ end trace
c8aa0c8180e869dc ]---
Kernel panic - not syncing: Fatal exception
Kernel Offset: disabled
This issue can be reproduced every week in a production environment.
This issue is related to the usage mode. If others use ocfs2 in this
mode, the kernel will panic frequently.
[akpm@linux-foundation.org: coding style fixes]
[Fix new warning due to unused function by removing said function - Linus ]
Link: http://lkml.kernel.org/r/1568772175-2906-2-git-send-email-sunny.s.zhang@oracle.com
Signed-off-by: Shuning Zhang <sunny.s.zhang@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Joseph Qi <jiangqi903@gmail.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andy Shevchenko [Mon, 14 Oct 2019 09:51:04 +0000 (12:51 +0300)]
pinctrl: intel: Avoid potential glitches if pin is in GPIO mode
[ Upstream commit
29c2c6aa32405dfee4a29911a51ba133edcedb0f ]
When consumer requests a pin, in order to be on the safest side,
we switch it first to GPIO mode followed by immediate transition
to the input state. Due to posted writes it's luckily to be a single
I/O transaction.
However, if firmware or boot loader already configures the pin
to the GPIO mode, user expects no glitches for the requested pin.
We may check if the pin is pre-configured and leave it as is
till the actual consumer toggles its state to avoid glitches.
Fixes:
7981c0015af2 ("pinctrl: intel: Add Intel Sunrisepoint pin controller and GPIO support")
Depends-on:
f5a26acf0162 ("pinctrl: intel: Initialize GPIO properly when used through irqchip")
Cc: stable@vger.kernel.org
Cc: fei.yang@intel.com
Reported-by: Oliver Barta <oliver.barta@aptiv.com>
Reported-by: Malin Jonsson <malin.jonsson@ericsson.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Wenwen Wang [Mon, 12 Aug 2019 05:59:21 +0000 (00:59 -0500)]
e1000: fix memory leaks
[ Upstream commit
8472ba62154058b64ebb83d5f57259a352d28697 ]
In e1000_set_ringparam(), 'tx_old' and 'rx_old' are not deallocated if
e1000_up() fails, leading to memory leaks. Refactor the code to fix this
issue.
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Manfred Rudigier [Thu, 15 Aug 2019 20:55:20 +0000 (13:55 -0700)]
igb: Fix constant media auto sense switching when no cable is connected
[ Upstream commit
8d5cfd7f76a2414e23c74bb8858af7540365d985 ]
At least on the i350 there is an annoying behavior that is maybe also
present on 82580 devices, but was probably not noticed yet as MAS is not
widely used.
If no cable is connected on both fiber/copper ports the media auto sense
code will constantly swap between them as part of the watchdog task and
produce many unnecessary kernel log messages.
The swap code responsible for this behavior (switching to fiber) should
not be executed if the current media type is copper and there is no signal
detected on the fiber port. In this case we can safely wait until the
AUTOSENSE_EN bit is cleared.
Signed-off-by: Manfred Rudigier <manfred.rudigier@omicronenergy.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Chuhong Yuan [Fri, 1 Nov 2019 12:17:25 +0000 (20:17 +0800)]
net: ethernet: arc: add the missed clk_disable_unprepare
[ Upstream commit
4202e219edd6cc164c042e16fa327525410705ae ]
The remove misses to disable and unprepare priv->macclk like what is done
when probe fails.
Add the missed call in remove.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Trond Myklebust [Thu, 31 Oct 2019 22:40:32 +0000 (18:40 -0400)]
NFSv4: Don't allow a cached open with a revoked delegation
[ Upstream commit
be3df3dd4c70ee020587a943a31b98a0fb4b6424 ]
If the delegation is marked as being revoked, we must not use it
for cached opens.
Fixes:
869f9dfa4d6d ("NFSv4: Fix races between nfs_remove_bad_delegation() and delegation return")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Felipe Balbi [Thu, 31 Oct 2019 09:07:13 +0000 (11:07 +0200)]
usb: dwc3: gadget: fix race when disabling ep with cancelled xfers
[ Upstream commit
d8eca64eec7103ab1fbabc0a187dbf6acfb2af93 ]
When disabling an endpoint which has cancelled requests, we should
make sure to giveback requests that are currently pending in the
cancelled list, otherwise we may fall into a situation where command
completion interrupt fires after endpoint has been disabled, therefore
causing a splat.
Fixes:
fec9095bdef4 "usb: dwc3: gadget: remove wait_end_transfer"
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Link: https://lore.kernel.org/r/20191031090713.1452818-1-felipe.balbi@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Haiyang Zhang [Wed, 30 Oct 2019 15:32:13 +0000 (15:32 +0000)]
hv_netvsc: Fix error handling in netvsc_attach()
[ Upstream commit
719b85c336ed35565d0f3982269d6f684087bb00 ]
If rndis_filter_open() fails, we need to remove the rndis device created
in earlier steps, before returning an error code. Otherwise, the retry of
netvsc_attach() from its callers will fail and hang.
Fixes:
7b2ee50c0cd5 ("hv_netvsc: common detach logic")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Michael Strauss [Thu, 3 Oct 2019 15:54:15 +0000 (11:54 -0400)]
drm/amd/display: Passive DP->HDMI dongle detection fix
[ Upstream commit
bc2fde42e2418808dbfc04de1a6da91d7d31cf1a ]
[WHY]
i2c_read is called to differentiate passive DP->HDMI and DP->DVI-D dongles
The call is expected to fail in DVI-D case but pass in HDMI case
Some HDMI dongles have a chance to fail as well, causing misdetection as DVI-D
[HOW]
Retry i2c_read to ensure failed result is valid
Signed-off-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Andrey Grodzovsky [Thu, 24 Oct 2019 19:44:10 +0000 (15:44 -0400)]
drm/amdgpu: If amdgpu_ib_schedule fails return back the error.
[ Upstream commit
57c0f58e9f562089de5f0b60da103677d232374c ]
Use ERR_PTR to return back the error happened during amdgpu_ib_schedule.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Takashi Iwai [Mon, 21 Oct 2019 15:17:21 +0000 (17:17 +0200)]
iommu/amd: Apply the same IVRS IOAPIC workaround to Acer Aspire A315-41
[ Upstream commit
ad3e8da2d422c63c13819a53d3c5ea9312cc0b9d ]
Acer Aspire A315-41 requires the very same workaround as the existing
quirk for Dell Latitude 5495. Add the new entry for that.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1137799
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Sat, 26 Oct 2019 18:04:27 +0000 (21:04 +0300)]
net: mscc: ocelot: refuse to overwrite the port's native vlan
[ Upstream commit
b9cd75e6689560140dadaed98eb4b41aad75d55d ]
The switch driver keeps a "vid" variable per port, which signifies _the_
VLAN ID that is stripped on that port's egress (aka the native VLAN on a
trunk port).
That is the way the hardware is designed (mostly). The port->vid is
programmed into REW:PORT:PORT_VLAN_CFG:PORT_VID and the rewriter is told
to send all traffic as tagged except the one having port->vid.
There exists a possibility of finer-grained egress untagging decisions:
using the VCAP IS1 engine, one rule can be added to match every
VLAN-tagged frame whose VLAN should be untagged, and set POP_CNT=1 as
action. However, the IS1 can hold at most 512 entries, and the VLANs are
in the order of 6 * 4096.
So the code is fine for now. But this sequence of commands:
$ bridge vlan add dev swp0 vid 1 pvid untagged
$ bridge vlan add dev swp0 vid 2 untagged
makes untagged and pvid-tagged traffic be sent out of swp0 as tagged
with VID 1, despite user's request.
Prevent that from happening. The user should temporarily remove the
existing untagged VLAN (1 in this case), add it back as tagged, and then
add the new untagged VLAN (2 in this case).
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes:
7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Vladimir Oltean [Sat, 26 Oct 2019 18:04:26 +0000 (21:04 +0300)]
net: mscc: ocelot: fix vlan_filtering when enslaving to bridge before link is up
[ Upstream commit
1c44ce560b4de639f237b458be1729489ff44d0a ]
Background information: the driver operates the hardware in a mode where
a single VLAN can be transmitted as untagged on a particular egress
port. That is the "native VLAN on trunk port" use case. Its value is
held in port->vid.
Consider the following command sequence (no network manager, all
interfaces are down, debugging prints added by me):
$ ip link add dev br0 type bridge vlan_filtering 1
$ ip link set dev swp0 master br0
Kernel code path during last command:
br_add_slave -> ocelot_netdevice_port_event (NETDEV_CHANGEUPPER):
[ 21.401901] ocelot_vlan_port_apply: port 0 vlan aware 0 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> switchdev_port_attr_set -> ocelot_port_attr_set (SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING):
[ 21.413335] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 0 vid 0
br_add_slave -> nbp_vlan_init -> nbp_vlan_add -> br_switchdev_port_vlan_add -> switchdev_port_obj_add -> ocelot_port_obj_add -> ocelot_vlan_vid_add
[ 21.667421] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 1
So far so good. The bridge has replaced the driver's default pvid used
in standalone mode (0) with its own default_pvid (1). The port's vid
(native VLAN) has also changed from 0 to 1.
$ ip link set dev swp0 up
[ 31.722956] 8021q: adding VLAN 0 to HW filter on device swp0
do_setlink -> dev_change_flags -> vlan_vid_add -> ocelot_vlan_rx_add_vid -> ocelot_vlan_vid_add:
[ 31.728700] ocelot_vlan_port_apply: port 0 vlan aware 1 pvid 1 vid 0
The 8021q module uses the .ndo_vlan_rx_add_vid API on .ndo_open to make
ports be able to transmit and receive 802.1p-tagged traffic by default.
This API is supposed to offload a VLAN sub-interface, which for a switch
port means to add a VLAN that is not a pvid, and tagged on egress.
But the driver implementation of .ndo_vlan_rx_add_vid is wrong: it adds
back vid 0 as "egress untagged". Now back to the initial paragraph:
there is a single untagged VID that the driver keeps track of, and that
has just changed from 1 (the pvid) to 0. So this breaks the bridge
core's expectation, because it has changed vid 1 from untagged to
tagged, when what the user sees is.
$ bridge vlan
port vlan ids
swp0 1 PVID Egress Untagged
br0 1 PVID Egress Untagged
But curiously, instead of manifesting itself as "untagged and
pvid-tagged traffic gets sent as tagged on egress", the bug:
- is hidden when vlan_filtering=0
- manifests as dropped traffic when vlan_filtering=1, due to this setting:
if (port->vlan_aware && !port->vid)
/* If port is vlan-aware and tagged, drop untagged and priority
* tagged frames.
*/
val |= ANA_PORT_DROP_CFG_DROP_UNTAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_S_TAGGED_ENA |
ANA_PORT_DROP_CFG_DROP_PRIO_C_TAGGED_ENA;
which would have made sense if it weren't for this bug. The setting's
intention was "this is a trunk port with no native VLAN, so don't accept
untagged traffic". So the driver was never expecting to set VLAN 0 as
the value of the native VLAN, 0 was just encoding for "invalid".
So the fix is to not send 802.1p traffic as untagged, because that would
change the port's native vlan to 0, unbeknownst to the bridge, and
trigger unexpected code paths in the driver.
Cc: Antoine Tenart <antoine.tenart@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Fixes:
7142529f1688 ("net: mscc: ocelot: add VLAN filtering")
Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Jiangfeng Xiao [Fri, 25 Oct 2019 13:48:22 +0000 (21:48 +0800)]
net: hisilicon: Fix "Trying to free already-free IRQ"
[ Upstream commit
63a41746827cb16dc6ad0d4d761ab4e7dda7a0c3 ]
When rmmod hip04_eth.ko, we can get the following warning:
Task track: rmmod(1623)>bash(1591)>login(1581)>init(1)
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1623 at kernel/irq/manage.c:1557 __free_irq+0xa4/0x2ac()
Trying to free already-free IRQ 200
Modules linked in: ping(O) pramdisk(O) cpuinfo(O) rtos_snapshot(O) interrupt_ctrl(O) mtdblock mtd_blkdevrtfs nfs_acl nfs lockd grace sunrpc xt_tcpudp ipt_REJECT iptable_filter ip_tables x_tables nf_reject_ipv
CPU: 0 PID: 1623 Comm: rmmod Tainted: G O 4.4.193 #1
Hardware name: Hisilicon A15
[<
c020b408>] (rtos_unwind_backtrace) from [<
c0206624>] (show_stack+0x10/0x14)
[<
c0206624>] (show_stack) from [<
c03f2be4>] (dump_stack+0xa0/0xd8)
[<
c03f2be4>] (dump_stack) from [<
c021a780>] (warn_slowpath_common+0x84/0xb0)
[<
c021a780>] (warn_slowpath_common) from [<
c021a7e8>] (warn_slowpath_fmt+0x3c/0x68)
[<
c021a7e8>] (warn_slowpath_fmt) from [<
c026876c>] (__free_irq+0xa4/0x2ac)
[<
c026876c>] (__free_irq) from [<
c0268a14>] (free_irq+0x60/0x7c)
[<
c0268a14>] (free_irq) from [<
c0469e80>] (release_nodes+0x1c4/0x1ec)
[<
c0469e80>] (release_nodes) from [<
c0466924>] (__device_release_driver+0xa8/0x104)
[<
c0466924>] (__device_release_driver) from [<
c0466a80>] (driver_detach+0xd0/0xf8)
[<
c0466a80>] (driver_detach) from [<
c0465e18>] (bus_remove_driver+0x64/0x8c)
[<
c0465e18>] (bus_remove_driver) from [<
c02935b0>] (SyS_delete_module+0x198/0x1e0)
[<
c02935b0>] (SyS_delete_module) from [<
c0202ed0>] (__sys_trace_return+0x0/0x10)
---[ end trace
bb25d6123d849b44 ]---
Currently "rmmod hip04_eth.ko" call free_irq more than once
as devres_release_all and hip04_remove both call free_irq.
This results in a 'Trying to free already-free IRQ' warning.
To solve the problem free_irq has been moved out of hip04_remove.
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Will Deacon [Fri, 25 Oct 2019 11:06:02 +0000 (12:06 +0100)]
fjes: Handle workqueue allocation failure
[ Upstream commit
85ac30fa2e24f628e9f4f9344460f4015d33fd7d ]
In the highly unlikely event that we fail to allocate either of the
"/txrx" or "/control" workqueues, we should bail cleanly rather than
blindly march on with NULL queue pointer(s) installed in the
'fjes_adapter' instance.
Cc: "David S. Miller" <davem@davemloft.net>
Reported-by: Nicolas Waisman <nico@semmle.com>
Link: https://lore.kernel.org/lkml/CADJ_3a8WFrs5NouXNqS5WYe7rebFP+_A5CheeqAyD_p7DFJJcg@mail.gmail.com/
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Anton Eidelman [Fri, 18 Oct 2019 18:32:50 +0000 (11:32 -0700)]
nvme-multipath: fix possible io hang after ctrl reconnect
[ Upstream commit
af8fd0424713a2adb812d10d55e86718152cf656 ]
The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
This fails because ctrl disconnects.
Therefore nvme_update_ns_ana_state() is not called
and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
nvme_read_ana_log(ctrl, groups_only=true).
However, nvme_update_ana_state() does not update namespaces
because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.
Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.
More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.
Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.
Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Anton Eidelman <anton@lightbitslabs.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Nicholas Piggin [Thu, 24 Oct 2019 06:38:04 +0000 (16:38 +1000)]
scsi: qla2xxx: stop timer in shutdown path
[ Upstream commit
d3566abb1a1e7772116e4d50fb6a58d19c9802e5 ]
In shutdown/reboot paths, the timer is not stopped:
qla2x00_shutdown
pci_device_shutdown
device_shutdown
kernel_restart_prepare
kernel_restart
sys_reboot
This causes lockups (on powerpc) when firmware config space access calls
are interrupted by smp_send_stop later in reboot.
Fixes:
e30d1756480dc ("[SCSI] qla2xxx: Addition of shutdown callback handler.")
Link: https://lore.kernel.org/r/20191024063804.14538-1-npiggin@gmail.com
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Lijun Ou [Sat, 26 Oct 2019 06:56:35 +0000 (14:56 +0800)]
RDMA/hns: Prevent memory leaks of eq->buf_list
[ Upstream commit
b681a0529968d2261aa15d7a1e78801b2c06bb07 ]
eq->buf_list->buf and eq->buf_list should also be freed when eqe_hop_num
is set to 0, or there will be memory leaks.
Fixes:
a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/1572072995-11277-3-git-send-email-liweihang@hisilicon.com
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Weihang Li <liweihang@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Potnuri Bharat Teja [Fri, 25 Oct 2019 12:34:40 +0000 (18:04 +0530)]
RDMA/iw_cxgb4: Avoid freeing skb twice in arp failure case
[ Upstream commit
d4934f45693651ea15357dd6c7c36be28b6da884 ]
_put_ep_safe() and _put_pass_ep_safe() free the skb before it is freed by
process_work(). fix double free by freeing the skb only in process_work().
Fixes:
1dad0ebeea1c ("iw_cxgb4: Avoid touch after free error in ARP failure handlers")
Link: https://lore.kernel.org/r/1572006880-5800-1-git-send-email-bharat@chelsio.com
Signed-off-by: Dakshaja Uppalapati <dakshaja@chelsio.com>
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
GwanYeong Kim [Fri, 18 Oct 2019 03:22:23 +0000 (03:22 +0000)]
usbip: tools: Fix read_usb_vudc_device() error path handling
[ Upstream commit
28df0642abbf6d66908a2858922a7e4b21cdd8c2 ]
This isn't really accurate right. fread() doesn't always
return 0 in error. It could return < number of elements
and set errno.
Signed-off-by: GwanYeong Kim <gy741.kim@gmail.com>
Acked-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191018032223.4644-1-gy741.kim@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Johan Hovold [Tue, 22 Oct 2019 14:32:03 +0000 (16:32 +0200)]
USB: ldusb: use unsigned size format specifiers
[ Upstream commit
88f6bf3846ee90bf33aa1ce848cd3bfb3229f4a4 ]
A recent info-leak bug manifested itself along with warning about a
negative buffer overflow:
ldusb 1-1:0.28: Read buffer overflow, -
131383859965943 bytes dropped
when it was really a rather large positive one.
A sanity check that prevents this has now been put in place, but let's
fix up the size format specifiers, which should all be unsigned.
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191022143203.5260-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Alan Stern [Mon, 28 Oct 2019 14:52:35 +0000 (10:52 -0400)]
USB: Skip endpoints with 0 maxpacket length
[ Upstream commit
d482c7bb0541d19dea8bff437a9f3c5563b5b2d2 ]
Endpoints with a maxpacket length of 0 are probably useless. They
can't transfer any data, and it's not at all unlikely that an HCD will
crash or hang when trying to handle an URB for such an endpoint.
Currently the USB core does not check for endpoints having a maxpacket
value of 0. This patch adds a check, printing a warning and skipping
over any endpoints it catches.
Now, the USB spec does not rule out endpoints having maxpacket = 0.
But since they wouldn't have any practical use, there doesn't seem to
be any good reason for us to accept them.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910281050420.1485-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
projects / platform / kernel / linux-rpi.git / log