nfsd: Don't set eof on a truncated READ_PLUS

[ Upstream commit b68f0cbd3f95f2df81e525c310a41fc73c2ed0d3 ]

If the READ_PLUS operation was truncated due to an error, then ensure we
clear the 'eof' flag.

Fixes: 9f0b5792f07d ("NFSD: Encode a full READ_PLUS reply")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

nfsd: Fixes for nfsd4_encode_read_plus_data()

[ Upstream commit 72d78717c6d06adf65d2e3dccc96d9e9dc978593 ]

Ensure that we encode the data payload + padding, and that we truncate
the preallocated buffer to the actual read size.

Fixes: 528b84934eb9 ("NFSD: Add READ_PLUS data support")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: fix 'nopvspin' build error

[ Upstream commit bd9dcef67ffcae2de49e319fba349df76472fd10 ]

Fix build error in x86/xen/ when PARAVIRT_SPINLOCKS is not enabled.

Fixes this build error:

../arch/x86/xen/smp_hvm.c: In function ‘xen_hvm_smp_init’:
../arch/x86/xen/smp_hvm.c:77:3: error: ‘nopvspin’ undeclared (first use in this function)
   nopvspin = true;

Fixes: 3d7746bea925 ("x86/xen: Fix xen_hvm_smp_init() when vector callback not available")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20210115191123.27572-1-rdunlap@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Fix maximum allowed phsyical memory for RV32

[ Upstream commit e557793799c5a8406afb08aa170509619f7eac36 ]

Linux kernel can only map 1GB of address space for RV32 as the page offset
is set to 0xC0000000. The current description in the Kconfig is confusing
as it indicates that RV32 can support 2GB of physical memory. That is
simply not true for current kernel. In future, a 2GB split support can be
added to allow 2GB physical address space.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

RISC-V: Set current memblock limit

[ Upstream commit abb8e86b269604e906a6a4af7a09f04b72dbb862 ]

Currently, linux kernel can not use last 4k bytes of addressable space
because IS_ERR_VALUE macro treats those as an error. This will be an issue
for RV32 as any memblock allocator potentially allocate chunk of memory
from the end of DRAM (2GB) leading bad address error even though the
address was technically valid.

Fix this issue by limiting the memblock if available memory spans the
entire address space.

Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libperf tests: Fail when failing to get a tracepoint id

[ Upstream commit 66dd86b2a2bee129c70f7ff054d3a6a2e5f8eb20 ]

Permissions are necessary to get a tracepoint id. Fail the test when the
read fails.

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

libperf tests: If a test fails return non-zero

[ Upstream commit bba2ea17ef553aea0df80cb64399fe2f70f225dd ]

If a test fails return -1 rather than 0. This is consistent with the
return value in test-cpumap.c

Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20210114180250.3853825-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

io_uring: flush timeouts that should already have expired

[ Upstream commit f010505b78a4fa8d5b6480752566e7313fb5ca6e ]

Right now io_flush_timeouts() checks if the current number of events
is equal to ->timeout.target_seq, but this will miss some timeouts if
there have been more than 1 event added since the last time they were
flushed (possible in io_submit_flush_completions(), for example). Fix
it by recording the last sequence at which timeouts were flushed so
that the number of events seen can be compared to the number of events
needed without overflow.

Signed-off-by: Marcelo Diop-Gonzalez <marcelo827@gmail.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/kms/nv50-: fix case where notifier buffer is at offset 0

[ Upstream commit caeb6ab899c3d36a74cda6e299c6e1c9c4e2a22e ]

VRAM offset 0 is a valid address, triggered on GA102.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/mmu: fix vram heap sizing

[ Upstream commit add42781ad76c5ae65127bf13852a4c6b2f08849 ]

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/i2c/gm200: increase width of aux semaphore owner fields

[ Upstream commit ba6e9ab0fcf3d76e3952deb12b5f993991621d9c ]

Noticed while debugging GA102.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/privring: ack interrupts the same way as RM

[ Upstream commit e05e06cd34f5311f677294a08b609acfbc315236 ]

Whatever it is that we were doing before doesn't work on Ampere.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/nouveau/bios: fix issue shadowing expansion ROMs

[ Upstream commit 402a89660e9dc880710b12773076a336c9dab3d7 ]

This issue has generally been covered up by the presence of additional
expansion ROMs after the ones we're interested in, with header fetches
of subsequent images loading enough of the ROM to hide the issue.

Noticed on GA102, which lacks a type 0x70 image compared to TU102,.

[  906.364197] nouveau 0000:09:00.0: bios: 00000000: type 00, 65024 bytes
[  906.381205] nouveau 0000:09:00.0: bios: 0000fe00: type 03, 91648 bytes
[  906.405213] nouveau 0000:09:00.0: bios: 00026400: type e0, 22016 bytes
[  906.410984] nouveau 0000:09:00.0: bios: 0002ba00: type e0, 366080 bytes

vs

[   22.961901] nouveau 0000:09:00.0: bios: 00000000: type 00, 60416 bytes
[   22.984174] nouveau 0000:09:00.0: bios: 0000ec00: type 03, 71168 bytes
[   23.010446] nouveau 0000:09:00.0: bios: 00020200: type e0, 48128 bytes
[   23.028220] nouveau 0000:09:00.0: bios: 0002be00: type e0, 140800 bytes
[   23.080196] nouveau 0000:09:00.0: bios: 0004e400: type 70, 7168 bytes

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: Fix to be able to stop crc calculation

[ Upstream commit 02ce73b01e09e388614b22b7ebc71debf4a588f0 ]

[Why]
Find out when we try to disable CRC calculation,
crc generation is still enabled. Main reason is
that dc_stream_configure_crc() will never get
called when the source is AMDGPU_DM_PIPE_CRC_SOURCE_NONE.

[How]
Add checking condition that when source is
AMDGPU_DM_PIPE_CRC_SOURCE_NONE, we should also call
dc_stream_configure_crc() to disable crc calculation.
Also, clean up crc window when disable crc calculation.

Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-hidpp: Add product ID for MX Ergo in Bluetooth mode

[ Upstream commit 7de843dbaaa68aa514090e6226ed7c6374fd7e49 ]

The Logitech MX Ergo trackball supports HID++ 4.5 over Bluetooth. Add its
product ID to the table so we can get battery monitoring support.
(The hid-logitech-hidpp driver already recognizes it when connected via
a Unifying Receiver.)

[jkosina@suse.cz: fix whitespace damage]
Signed-off-by: Nicholas Miell <nmiell@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amd/display: disable dcn10 pipe split by default

[ Upstream commit 9d03bb102028b4a3f4a64d6069b219e2e1c1f306 ]

[Why]
The initial purpose of dcn10 pipe split is to support some high
bandwidth mode which requires dispclk greater than max dispclk. By
initial bring up power measurement data, it showed power consumption is
less with pipe split for dcn block. This could be reason for enable pipe
split by default. By battery life measurement of some Chromebooks,
result shows battery life is longer with pipe split disabled.

[How]
Disable pipe split by default. Pipe split could be still enabled when
required dispclk is greater than max dispclk.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/amdgpu/psp: fix psp gfx ctrl cmds

[ Upstream commit f14a5c34d143f6627f0be70c0de1d962f3a6ff1c ]

psp GFX_CTRL_CMD_ID_CONSUME_CMD different for windows and linux,
according to psp, linux cmds are not correct.

v2: only correct GFX_CTRL_CMD_ID_CONSUME_CMD.

Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Emily.Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: defconfig: enable gpio support for HiFive Unleashed

[ Upstream commit 0983834a83931606a647c275e5d4165ce4e7b49f ]

Ethernet phy VSC8541-01 on HiFive Unleashed has its reset line
connected to a gpio, so enable GPIO driver's required to reset
the phy.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dts: phy: add GPIO number and active state used for phy reset

[ Upstream commit a0fa9d727043da2238432471e85de0bdb8a8df65 ]

The GEMGXL_RST line on HiFive Unleashed is pulled low and is
using GPIO number 12. Add these reset-gpio details to dt-node
using which the linux phylib can reset the phy.

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dts: phy: fix missing mdio device and probe failure of vsc8541-01 device

[ Upstream commit be969b7cfbcfa8a835a528f1dc467f0975c6d883 ]

HiFive unleashed A00 board has VSC8541-01 ethernet phy, this device is
identified as a Revision B device as described in device identification
registers. In order to use this phy in the unmanaged mode, it requires
a specific reset sequence of logical 0-1-0-1 transition on the NRESET pin
as documented here [1].

Currently, the bootloader (fsbl or u-boot-spl) takes care of the phy reset.
If due to some reason the phy device hasn't received the reset by the prior
stages before the linux macb driver comes into the picture, the MACB mii
bus gets probed but the mdio scan fails and is not even able to read the
phy ID registers. It gives an error message:

"libphy: MACB_mii_bus: probed
mdio_bus 10090000.ethernet-ffffffff: MDIO device at address 0 is missing."

Thus adding the device OUI (Organizationally Unique Identifier) to the phy
device node helps to probe the phy device.

[1]: VSC8541-01 datasheet:
https://www.mouser.com/ds/2/523/Microsemi_VSC8541-01_Datasheet_10496_V40-1148034.pdf

Signed-off-by: Sagar Shrikant Kadam <sagar.kadam@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Fix xen_hvm_smp_init() when vector callback not available

[ Upstream commit 3d7746bea92530e8695258a3cf3ddec7a135edd6 ]

Only the IPI-related functions in the smp_ops should be conditional
on the vector callback being available. The rest should still happen:

 • xen_hvm_smp_prepare_boot_cpu()

   This function does two things, both of which should still happen if
   there is no vector callback support.

   The call to xen_vcpu_setup() for vCPU0 should still happen as it just
   sets up the vcpu_info for CPU0. That does happen for the secondary
   vCPUs too, from xen_cpu_up_prepare_hvm().

   The second thing it does is call xen_init_spinlocks(), which perhaps
   counter-intuitively should *also* still be happening in the case
   without vector callbacks, so that it can clear its local xen_pvspin
   flag and disable the virt_spin_lock_key accordingly.

   Checking xen_have_vector_callback in xen_init_spinlocks() itself
   would affect PV guests, so set the global nopvspin flag in
   xen_hvm_smp_init() instead, when vector callbacks aren't available.

 • xen_hvm_smp_prepare_cpus()

   This does some IPI-related setup by calling xen_smp_intr_init() and
   xen_init_lock_cpu(), which can be made conditional. And it sets the
   xen_vcpu_id to XEN_VCPU_ID_INVALID for all possible CPUS, which does
   need to happen.

 • xen_smp_cpus_done()

   This offlines any vCPUs which doesn't fit in the global shared_info
   page, if separate vcpu_info placement isn't available. That part also
   needs to happen regardless of vector callback support.

 • xen_hvm_cpu_die()

   This doesn't actually do anything other than commin_cpu_die() right
   right now in the !vector_callback case; all three teardown functions
   it calls should be no-ops. But to guard against future regressions
   it's useful to call it anyway, and for it to explicitly check for
   xen_have_vector_callback before calling those additional functions.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-6-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery

[ Upstream commit b36b0fe96af13460278bf9b173beced1bd15f85d ]

It's useful to be able to test non-vector event channel delivery, to make
sure Linux will work properly on older Xen which doesn't have it.

It's also useful for those working on Xen and Xen-compatible hypervisors,
because there are guest kernels still in active use which use PCI INTX
even when vector delivery is available.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210106153958.584169-4-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xen: Fix event channel callback via INTX/GSI

[ Upstream commit 3499ba8198cad47b731792e5e56b9ec2a78a83a2 ]

For a while, event channel notification via the PCI platform device
has been broken, because we attempt to communicate with xenstore before
we even have notifications working, with the xs_reset_watches() call
in xs_init().

We tend to get away with this on Xen versions below 4.0 because we avoid
calling xs_reset_watches() anyway, because xenstore might not cope with
reading a non-existent key. And newer Xen *does* have the vector
callback support, so we rarely fall back to INTX/GSI delivery.

To fix it, clean up a bit of the mess of xs_init() and xenbus_probe()
startup. Call xs_init() directly from xenbus_init() only in the !XS_HVM
case, deferring it to be called from xenbus_probe() in the XS_HVM case
instead.

Then fix up the invocation of xenbus_probe() to happen either from its
device_initcall if the callback is available early enough, or when the
callback is finally set up. This means that the hack of calling
xenbus_probe() from a workqueue after the first interrupt, or directly
from the PCI platform device setup, is no longer needed.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20210113132606.422794-2-dwmw2@infradead.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

arm64: make atomic helpers __always_inline

[ Upstream commit c35a824c31834d947fb99b0c608c1b9f922b4ba0 ]

With UBSAN enabled and building with clang, there are occasionally
warnings like

WARNING: modpost: vmlinux.o(.text+0xc533ec): Section mismatch in reference from the function arch_atomic64_or() to the variable .init.data:numa_nodes_parsed
The function arch_atomic64_or() references
the variable __initdata numa_nodes_parsed.
This is often because arch_atomic64_or lacks a __initdata
annotation or the annotation of numa_nodes_parsed is wrong.

for functions that end up not being inlined as intended but operating
on __initdata variables. Mark these as __always_inline, along with
the corresponding asm-generic wrappers.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210108092024.4034860-1-arnd@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: cacheinfo: Fix using smp_processor_id() in preemptible

[ Upstream commit 80709af7325d179b433817f421c85449f2454046 ]

Use raw_smp_processor_id instead of smp_processor_id() to fix warning,

BUG: using smp_processor_id() in preemptible [00000000] code: init/1
caller is debug_smp_processor_id+0x1c/0x26
CPU: 0 PID: 1 Comm: init Not tainted 5.10.0-rc4 #211
Call Trace:
  walk_stackframe+0x0/0xaa
  show_stack+0x32/0x3e
  dump_stack+0x76/0x90
  check_preemption_disabled+0xaa/0xac
  debug_smp_processor_id+0x1c/0x26
  get_cache_size+0x18/0x68
  load_elf_binary+0x868/0xece
  bprm_execve+0x224/0x498
  kernel_execve+0xdc/0x142
  run_init_process+0x90/0x9e
  try_to_run_init_process+0x12/0x3c
  kernel_init+0xb4/0xf8
  ret_from_exception+0x0/0xc

The issue is found when CONFIG_DEBUG_PREEMPT enabled.

Reviewed-by: Atish Patra <atish.patra@wdc.com>
Tested-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[Palmer: Added a comment.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/tegra: fix tegra-hda on tegra30 soc

[ Upstream commit 615d435400435876ac68c1de37e9526a9164eaec ]

Currently hda on tegra30 fails to open a stream with an input/output error.

For example:
speaker-test -Dhw:0,3 -c 2

speaker-test 1.2.2

Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
 0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error

The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.

The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
   { ((num_channels * bits_per_sample) / number of SDOs) >= 8 }

The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.

For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;

On Tegra30,      ratio = 32/4 = 8  (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194,     ratio = 32/4 = 8  (FAIL) ==> Earlier workaround was
applied for it

If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.

Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.

[1] commit 60019d8c650d ("ALSA: hda/tegra: workaround playback failure on
Tegra194")

Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: tegra30: Add hda clock default rates to clock driver

[ Upstream commit f4eccc7fea203cfb35205891eced1ab51836f362 ]

Current implementation defaults the hda clocks to clk_m. This causes hda
to run too slow to operate correctly. Fix this by defaulting to pll_p and
setting the frequency to the correct rate.

This matches upstream t124 and downstream t30.

Acked-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Acked-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-2-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: Ignore battery for Elan touchscreen on ASUS UX550

[ Upstream commit 7c38e769d5c508939ce5dc26df72602f3c902342 ]

Battery status is being reported for the Elan touchscreen on ASUS
UX550 laptops despite not having a batter. It always shows either 0 or
1%.

Signed-off-by: Seth Miller <miller.seth@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: logitech-dj: add the G602 receiver

[ Upstream commit e400071a805d6229223a98899e9da8c6233704a1 ]

Tested. The device gets correctly exported to userspace and I can see
mouse and keyboard events.

Signed-off-by: Filipe Laíns <lains@archlinux.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Enable interrupts during syscalls with M-Mode

[ Upstream commit 643437b996bac9267785e0bd528332e2d5811067 ]

When running is M-Mode (no MMU config), MPIE does not get set. This
results in all syscalls being executed with interrupts disabled as
handle_exception never sets SR_IE as it always sees SR_PIE being
cleared. Fix this by always force enabling interrupts in
handle_syscall when CONFIG_RISCV_M_MODE is enabled.

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix sifive serial driver

[ Upstream commit 1f1496a923b6ba16679074fe77100e1b53cdb880 ]

Setup the port uartclk in sifive_serial_probe() so that the base baud
rate is correctly printed during device probe instead of always showing
"0".  I.e. the probe message is changed from

38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 0) is a SiFive UART v0

to the correct:

38000000.serial: ttySIF0 at MMIO 0x38000000 (irq = 1,
base_baud = 115200) is a SiFive UART v0

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

riscv: Fix kernel time_init()

[ Upstream commit 11f4c2e940e2f317c9d8fb5a79702f2a4a02ff98 ]

If of_clk_init() is not called in time_init(), clock providers defined
in the system device tree are not initialized, resulting in failures for
other devices to initialize due to missing clocks.
Similarly to other architectures and to the default kernel time_init()
implementation, call of_clk_init() before executing timer_probe() in
time_init().

Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: sd: Suppress spurious errors when WRITE SAME is being disabled

[ Upstream commit e5cc9002caafacbaa8dab878d17a313192c3b03b ]

The block layer code will split a large zeroout request into multiple bios
and if WRITE SAME is disabled because the storage device reports that it
does not support it (or support the length used), we can get an error
message from the block layer despite the setting of RQF_QUIET on the first
request.  This is because more than one request may have already been
submitted.

Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the
request early, we don't need to log a message because we did not actually
submit the command to the device, and the block layer code will handle the
error by submitting individual write bios.

Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: scsi_debug: Fix memleak in scsi_debug_init()

[ Upstream commit 3b01d7ea4dae907d34fa0eeb3f17bacd714c6d0c ]

When sdeb_zbc_model does not match BLK_ZONED_NONE, BLK_ZONED_HA or
BLK_ZONED_HM, we should free sdebug_q_arr to prevent memleak. Also there is
no need to execute sdebug_erase_store() on failure of sdeb_zbc_model_str().

Link: https://lore.kernel.org/r/20201226061503.20050-1-dinghao.liu@zju.edu.cn
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: qedi: Correct max length of CHAP secret

[ Upstream commit d50c7986fbf0e2167279e110a2ed5bd8e811c660 ]

The CHAP secret displayed garbage characters causing iSCSI login
authentication failure. Correct the CHAP password max length.

Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback

[ Upstream commit 35fc4cd34426c242ab015ef280853b7bff101f48 ]

Users can initiate resets to specific SCSI device/target/host through
IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host
_reset_handler() callbacks is initialized with a request whose tag is -1.
In this case it is not right for eh_device_reset_handler() callback to
count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI
device associated with the SCSI cmd.

Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL

[ Upstream commit 21acf4601cc63cf564c6fc1a74d81b191313c929 ]

UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL is intended to skip enabling
fWriteBoosterBufferFlushEn while WriteBooster is initializing.  Therefore
it is better to apply the checking during WriteBooster initialization only.

Link: https://lore.kernel.org/r/20201222072905.32221-3-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/hyperv: Fix kexec panic/hang issues

[ Upstream commit dfe94d4086e40e92b1926bddcefa629b791e9b28 ]

Currently the kexec kernel can panic or hang due to 2 causes:

1) hv_cpu_die() is not called upon kexec, so the hypervisor corrupts the
old VP Assist Pages when the kexec kernel runs. The same issue is fixed
for hibernation in commit 421f090c819d ("x86/hyperv: Suspend/resume the
VP assist page for hibernation"). Now fix it for kexec.

2) hyperv_cleanup() is called too early. In the kexec path, the other CPUs
are stopped in hv_machine_shutdown() -> native_machine_shutdown(), so
between hv_kexec_handler() and native_machine_shutdown(), the other CPUs
can still try to access the hypercall page and cause panic. The workaround
"hv_hypercall_pg = NULL;" in hyperv_cleanup() is unreliabe. Move
hyperv_cleanup() to a better place.

Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20201222065541.24312-1-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dm integrity: select CRYPTO_SKCIPHER

[ Upstream commit f7b347acb5f6c29d9229bb64893d8b6a2c7949fb ]

The integrity target relies on skcipher for encryption/decryption, but
certain kernel configurations may not enable CRYPTO_SKCIPHER, leading to
compilation errors due to unresolved symbols. Explicitly select
CRYPTO_SKCIPHER for DM_INTEGRITY, since it is unconditionally dependent
on it.

Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: sony: select CONFIG_CRC32

[ Upstream commit 273435a1d4e5826f039625c23ba4fe9a09f24d75 ]

Without crc32 support, this driver fails to link:

arm-linux-gnueabi-ld: drivers/hid/hid-sony.o: in function `sony_raw_event':
hid-sony.c:(.text+0x8f4): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: hid-sony.c:(.text+0x900): undefined reference to `crc32_le'
arm-linux-gnueabi-ld: drivers/hid/hid-sony.o:hid-sony.c:(.text+0x4408): more undefined references to `crc32_le' follow

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HID: multitouch: Enable multi-input for Synaptics pointstick/touchpad device

[ Upstream commit c3d6eb6e54373f297313b65c1f2319d36914d579 ]

Pointstick and its left/right buttons on HP EliteBook 850 G7 need
multi-input quirk to work correctly.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>

SUNRPC: Handle TCP socket sends with kernel_sendpage() again

[ Upstream commit 4a85a6a3320b4a622315d2e0ea91a1d2b013bce4 ]

Daire Byrne reports a ~50% aggregrate throughput regression on his
Linux NFS server after commit da1661b93bf4 ("SUNRPC: Teach server to
use xprt_sock_sendmsg for socket sends"), which replaced
kernel_send_page() calls in NFSD's socket send path with calls to
sock_sendmsg() using iov_iter.

Investigation showed that tcp_sendmsg() was not using zero-copy to
send the xdr_buf's bvec pages, but instead was relying on memcpy.
This means copying every byte of a large NFS READ payload.

It looks like TLS sockets do indeed support a ->sendpage method,
so it's really not necessary to use xprt_sock_sendmsg() to support
TLS fully on the server. A mechanical reversion of da1661b93bf4 is
not possible at this point, but we can re-implement the server's
TCP socket sendmsg path using kernel_sendpage().

Reported-by: Daire Byrne <daire@dneg.com>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=209439
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: rt711: mutex between calibration and power state changes

[ Upstream commit 6108f990c0887d3e8f1db2d13c7012e40a061f28 ]

To avoid calibration time-out, this patch adds the mutex between calibration and power state changes

Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20201217085651.24580-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ASoC: Intel: haswell: Add missing pm_ops

[ Upstream commit bb224c3e3e41d940612d4cc9573289cdbd5cb8f5 ]

haswell machine board is missing pm_ops what prevents it from undergoing
suspend-resume procedure successfully. Assign default snd_soc_pm_ops so
this is no longer the case.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201217105401.27865-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

drm/i915: Check for rq->hwsp validity after acquiring RCU lock

commit 45db630e5f7ec83817c57c8ae387fe219bd42adf upstream.

Since we allow removing the timeline map at runtime, there is a risk
that rq->hwsp points into a stale page. To control that risk, we hold
the RCU read lock while reading *rq->hwsp, but we missed a couple of
important barriers. First, the unpinning / removal of the timeline map
must be after all RCU readers into that map are complete, i.e. after an
rcu barrier (in this case courtesy of call_rcu()). Secondly, we must
make sure that the rq->hwsp we are about to dereference under the RCU
lock is valid. In this case, we make the rq->hwsp pointer safe during
i915_request_retire() and so we know that rq->hwsp may become invalid
only after the request has been signaled. Therefore is the request is
not yet signaled when we acquire rq->hwsp under the RCU, we know that
rq->hwsp will remain valid for the duration of the RCU read lock.

This is a very small window that may lead to either considering the
request not completed (causing a delay until the request is checked
again, any wait for the request is not affected) or dereferencing an
invalid pointer.

Fixes: 3adac4689f58 ("drm/i915: Introduce concept of per-timeline (context) HWSP")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: <stable@vger.kernel.org> # v5.1+
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201218122421.18344-1-chris@chris-wilson.co.uk
(cherry picked from commit 9bb36cf66091ddf2d8840e5aa705ad3c93a6279b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118101755.476744-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/i915/gt: Prevent use of engine->wa_ctx after error

commit 488751a0ef9b5ce572c47301ce62d54fc6b5a74d upstream.

On error we unpin and free the wa_ctx.vma, but do not clear any of the
derived flags. During lrc_init, we look at the flags and attempt to
dereference the wa_ctx.vma if they are set. To protect the error path
where we try to limp along without the wa_ctx, make sure we clear those
flags!

Reported-by: Matt Roper <matthew.d.roper@intel.com>
Fixes: 604a8f6f1e33 ("drm/i915/lrc: Only enable per-context and per-bb buffers if set")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v4.15+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210108204026.20682-1-chris@chris-wilson.co.uk
(cherry-picked from 5b4dc95cf7f573e927fbbd406ebe54225d41b9b2)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118095332.458813-1-chris@chris-wilson.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case

commit 348fe1ca5ccdca0f8c285e2ab99004fdcd531430 upstream.

[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.

[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.

Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Sung Lee <sung.lee@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Anson Jacob <anson.jacob@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/amdgpu: remove gpu info firmware of green sardine

commit acc214bfafbafcd29d5d25d1ede5f11c14ffc147 upstream.

The ip discovery is supported on green sardine, it doesn't need gpu info
firmware anymore.

Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/syncobj: Fix use-after-free

commit a37eef63bc9e16e06361b539e528058146af80ab upstream.

While reviewing Christian's annotation patch I noticed that we have a
user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj
reference before we've completed the waiting.

Of course usually there's nothing bad happening here since userspace
keeps the reference, but we can't rely on userspace to play nice here!

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Fixes: bc9c80fe01a2 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4")
Reviewed-by: Christian König <christian.koenig@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v5.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20210119130318.615145-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/atomic: put state on error path

commit 43b67309b6b2a3c08396cc9b3f83f21aa529d273 upstream.

Put the state before returning error code.

Fixes: 44596b8c4750 ("drm/atomic: Unify conflicting encoder handling.")
Signed-off-by: Pan Bian <bianpan2016@163.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210119121127.84127-1-bianpan2016@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: conditionally disable "recalculate" feature

commit 5c02406428d5219c367c5f53457698c58bc5f917 upstream.

Otherwise a malicious user could (ab)use the "recalculate" feature
that makes dm-integrity calculate the checksums in the background
while the device is already usable. When the system restarts before all
checksums have been calculated, the calculation continues where it was
interrupted even if the recalculate feature is not requested the next
time the dm device is set up.

Disable recalculating if we use internal_hash or journal_hash with a
key (e.g. HMAC) and we don't have the "legacy_recalculate" flag.

This may break activation of a volume, created by an older kernel,
that is not yet fully recalculated -- if this happens, the user should
add the "legacy_recalculate" flag to constructor parameters.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm integrity: fix a crash if "recalculate" used without "internal_hash"

commit 2d06dfecb132a1cc2e374a44eae83b5c4356b8b4 upstream.

Recalculate can only be specified with internal_hash.

Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm: avoid filesystem lookup in dm_get_dev_t()

commit 809b1e4945774c9ec5619a8f4e2189b7b3833c0c upstream.

This reverts commit
644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()")

dm_get_dev_t() is just used to convert an arbitrary 'path' string
into a dev_t. It doesn't presume that the device is present; that
check will be done later, as the only caller is dm_get_device(),
which does a dm_get_table_device() later on, which will properly
open the device.

So if the path string already _is_ in major:minor representation
we can convert it directly, avoiding a recursion into the filesystem
to lookup the block device.

This avoids a hang in multipath_message() when the filesystem is
inaccessible.

Fixes: 644bda6f3460 ("dm table: fall back to getting device using name_to_dev_t()")
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend

commit 5b191dcba719319148eeecf6ed409949fac55b39 upstream.

Commit e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
that added a shutdown callback to the diver, is causing "mmc timeout"
errors on S5 suspend. The problem was that the "remove" was queuing
additional MMC commands after the "shutdown" and these caused
timeouts as the MMC queues were cleaned up for "remove". The
shutdown callback will be changed to calling sdhci-pltfm_suspend
which should get better power savings because the clocks will be
shutdown.

Fixes: e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
Signed-off-by: Al Cooper <alcooperx@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210107221509.6597-1-alcooperx@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-xenon: fix 1.8v regulator stabilization

commit 1a3ed0dc3594d99ff341ec63865a40519ea24b8d upstream.

Automatic Clock Gating is a feature used for the power consumption
optimisation. It turned out that during early init phase it may prevent the
stable voltage switch to 1.8V - due to that on some platforms an endless
printout in dmesg can be observed: "mmc1: 1.8V regulator output did not
became stable" Fix the problem by disabling the ACG at very beginning of
the sdhci_init and let that be enabled later.

Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Signed-off-by: Alex Leibovich <alexl@marvell.com>
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201211141656.24915-1-mw@semihalf.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: sdhci-of-dwcmshc: fix rpmb access

commit ca1219c0a7432272324660fc9f61a9940f90c50b upstream.

Commit a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for
RPMB") began to use ACMD23 for RPMB if the host supports ACMD23. In
RPMB ACM23 case, we need to set bit 31 to CMD23 argument, otherwise
RPMB write operation will return general fail.

However, no matter V4 is enabled or not, the dwcmshc's ARGUMENT2
register is 32-bit block count register which doesn't support stuff
bits of CMD23 argument. So let's handle this specific ACMD23 case.

From another side, this patch also prepare for future v4 enabling
for dwcmshc, because from the 4.10 spec, the ARGUMENT2 register is
redefined as 32bit block count which doesn't support stuff bits of
CMD23 argument.

Fixes: a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20201229161625.38255233@xhacker.debian
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mmc: core: don't initialize block size from ext_csd if not present

commit b503087445ce7e45fabdee87ca9e460d5b5b5168 upstream.

If extended CSD was not available, the eMMC driver would incorrectly
set the block size to 0, as the data_sector_size field of ext_csd
was never initialized. This issue was exposed by commit 817046ecddbc
("block: Align max_hw_sectors to logical blocksize") which caused
max_sectors and max_hw_sectors to be set to 0 after setting the block
size to 0, resulting in a kernel panic in bio_split when attempting
to read from the device. Fix it by only reading the block size from
ext_csd if it is available.

Fixes: a5075eb94837 ("mmc: block: Allow disabling 512B sector size emulation")
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Link: https://linux-review.googlesource.com/id/If244d178da4d86b52034459438fec295b02d6e60
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210114201405.2934886-1-pcc@google.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

pinctrl: ingenic: Fix JZ4760 support

commit 9a85c09a3f507b925d75cb0c7c8f364467038052 upstream.

- JZ4760 and JZ4760B have a similar register layout as the JZ4740, and
  don't use the new register layout, which was introduced with the
  JZ4770 SoC and not the JZ4760 or JZ4760B SoCs.

- The JZ4740 code path only expected two function modes to be
  configurable for each pin, and wouldn't work with more than two. Fix
  it for the JZ4760, which has four configurable function modes.

Fixes: 0257595a5cf4 ("pinctrl: Ingenic: Add pinctrl driver for JZ4760 and JZ4760B.")
Cc: <stable@vger.kernel.org> # 5.3
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20201211232810.261565-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fs: fix lazytime expiration handling in __writeback_single_inode()

commit 1e249cb5b7fc09ff216aa5a12f6c302e434e88f9 upstream.

When lazytime is enabled and an inode is being written due to its
in-memory updated timestamps having expired, either due to a sync() or
syncfs() system call or due to dirtytime_expire_interval having elapsed,
the VFS needs to inform the filesystem so that the filesystem can copy
the inode's timestamps out to the on-disk data structures.

This is done by __writeback_single_inode() calling
mark_inode_dirty_sync(), which then calls ->dirty_inode(I_DIRTY_SYNC).

However, this occurs after __writeback_single_inode() has already
cleared the dirty flags from ->i_state.  This causes two bugs:

- mark_inode_dirty_sync() redirties the inode, causing it to remain
  dirty.  This wastefully causes the inode to be written twice.  But
  more importantly, it breaks cases where sync_filesystem() is expected
  to clean dirty inodes.  This includes the FS_IOC_REMOVE_ENCRYPTION_KEY
  ioctl (as reported at
  https://lore.kernel.org/r/20200306004555.GB225345@gmail.com), as well
  as possibly filesystem freezing (freeze_super()).

- Since ->i_state doesn't contain I_DIRTY_TIME when ->dirty_inode() is
  called from __writeback_single_inode() for lazytime expiration,
  xfs_fs_dirty_inode() ignores the notification.  (XFS only cares about
  lazytime expirations, and it assumes that i_state will contain
  I_DIRTY_TIME during those.)  Therefore, lazy timestamps aren't
  persisted by sync(), syncfs(), or dirtytime_expire_interval on XFS.

Fix this by moving the call to mark_inode_dirty_sync() to earlier in
__writeback_single_inode(), before the dirty flags are cleared from
i_state.  This makes filesystems be properly notified of the timestamp
expiration, and it avoids incorrectly redirtying the inode.

This fixes xfstest generic/580 (which tests
FS_IOC_REMOVE_ENCRYPTION_KEY) when run on ext4 or f2fs with lazytime
enabled.  It also fixes the new lazytime xfstest I've proposed, which
reproduces the above-mentioned XFS bug
(https://lore.kernel.org/r/20210105005818.92978-1-ebiggers@kernel.org).

Alternatively, we could call ->dirty_inode(I_DIRTY_SYNC) directly.  But
due to the introduction of I_SYNC_QUEUED, mark_inode_dirty_sync() is the
right thing to do because mark_inode_dirty_sync() now knows not to move
the inode to a writeback list if it is currently queued for sync.

Fixes: 0ae45f63d4ef ("vfs: add support for a lazytime mount option")
Cc: stable@vger.kernel.org
Depends-on: 5afced3bf281 ("writeback: Avoid skipping inode writeback")
Link: https://lore.kernel.org/r/20210112190253.64307-2-ebiggers@kernel.org
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: send: fix invalid clone operations when cloning from the same file and root

commit 518837e65068c385dddc0a87b3e577c8be7c13b1 upstream.

When an incremental send finds an extent that is shared, it checks which
file extent items in the range refer to that extent, and for those it
emits clone operations, while for others it emits regular write operations
to avoid corruption at the destination (as described and fixed by commit
d906d49fc5f4 ("Btrfs: send, fix file corruption due to incorrect cloning
operations")).

However when the root we are cloning from is the send root, we are cloning
from the inode currently being processed and the source file range has
several extent items that partially point to the desired extent, with an
offset smaller than the offset in the file extent item for the range we
want to clone into, it can cause the algorithm to issue a clone operation
that starts at the current eof of the file being processed in the receiver
side, in which case the receiver will fail, with EINVAL, when attempting
to execute the clone operation.

Example reproducer:

  $ cat test-send-clone.sh
  #!/bin/bash

  DEV=/dev/sdi
  MNT=/mnt/sdi

  mkfs.btrfs -f $DEV >/dev/null
  mount $DEV $MNT

  # Create our test file with a single and large extent (1M) and with
  # different content for different file ranges that will be reflinked
  # later.
  xfs_io -f \
         -c "pwrite -S 0xab 0 128K" \
         -c "pwrite -S 0xcd 128K 128K" \
         -c "pwrite -S 0xef 256K 256K" \
         -c "pwrite -S 0x1a 512K 512K" \
         $MNT/foobar

  btrfs subvolume snapshot -r $MNT $MNT/snap1
  btrfs send -f /tmp/snap1.send $MNT/snap1

  # Now do a series of changes to our file such that we end up with
  # different parts of the extent reflinked into different file offsets
  # and we overwrite a large part of the extent too, so no file extent
  # items refer to that part that was overwritten. This used to confuse
  # the algorithm used by the kernel to figure out which file ranges to
  # clone, making it attempt to clone from a source range starting at
  # the current eof of the file, resulting in the receiver to fail since
  # it is an invalid clone operation.
  #
  xfs_io -c "reflink $MNT/foobar 64K 1M 960K" \
         -c "reflink $MNT/foobar 0K 512K 256K" \
         -c "reflink $MNT/foobar 512K 128K 256K" \
         -c "pwrite -S 0x73 384K 640K" \
         $MNT/foobar

  btrfs subvolume snapshot -r $MNT $MNT/snap2
  btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2

  echo -e "\nFile digest in the original filesystem:"
  md5sum $MNT/snap2/foobar

  # Now unmount the filesystem, create a new one, mount it and try to
  # apply both send streams to recreate both snapshots.
  umount $DEV

  mkfs.btrfs -f $DEV >/dev/null
  mount $DEV $MNT

  btrfs receive -f /tmp/snap1.send $MNT
  btrfs receive -f /tmp/snap2.send $MNT

  # Must match what we got in the original filesystem of course.
  echo -e "\nFile digest in the new filesystem:"
  md5sum $MNT/snap2/foobar

  umount $MNT

When running the reproducer, the incremental send operation fails due to
an invalid clone operation:

  $ ./test-send-clone.sh
  wrote 131072/131072 bytes at offset 0
  128 KiB, 32 ops; 0.0015 sec (80.906 MiB/sec and 20711.9741 ops/sec)
  wrote 131072/131072 bytes at offset 131072
  128 KiB, 32 ops; 0.0013 sec (90.514 MiB/sec and 23171.6148 ops/sec)
  wrote 262144/262144 bytes at offset 262144
  256 KiB, 64 ops; 0.0025 sec (98.270 MiB/sec and 25157.2327 ops/sec)
  wrote 524288/524288 bytes at offset 524288
  512 KiB, 128 ops; 0.0052 sec (95.730 MiB/sec and 24506.9883 ops/sec)
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
  At subvol /mnt/sdi/snap1
  linked 983040/983040 bytes at offset 1048576
  960 KiB, 1 ops; 0.0006 sec (1.419 GiB/sec and 1550.3876 ops/sec)
  linked 262144/262144 bytes at offset 524288
  256 KiB, 1 ops; 0.0020 sec (120.192 MiB/sec and 480.7692 ops/sec)
  linked 262144/262144 bytes at offset 131072
  256 KiB, 1 ops; 0.0018 sec (133.833 MiB/sec and 535.3319 ops/sec)
  wrote 655360/655360 bytes at offset 393216
  640 KiB, 160 ops; 0.0093 sec (66.781 MiB/sec and 17095.8436 ops/sec)
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
  At subvol /mnt/sdi/snap2

  File digest in the original filesystem:
  9c13c61cb0b9f5abf45344375cb04dfa  /mnt/sdi/snap2/foobar
  At subvol snap1
  At snapshot snap2
  ERROR: failed to clone extents to foobar: Invalid argument

  File digest in the new filesystem:
  132f0396da8f48d2e667196bff882cfc  /mnt/sdi/snap2/foobar

The clone operation is invalid because its source range starts at the
current eof of the file in the receiver, causing the receiver to get
an EINVAL error from the clone operation when attempting it.

For the example above, what happens is the following:

1) When processing the extent at file offset 1M, the algorithm checks that
   the extent is shared and can be (fully or partially) found at file
   offset 0.

   At this point the file has a size (and eof) of 1M at the receiver;

2) It finds that our extent item at file offset 1M has a data offset of
   64K and, since the file extent item at file offset 0 has a data offset
   of 0, it issues a clone operation, from the same file and root, that
   has a source range offset of 64K, destination offset of 1M and a length
   of 64K, since the extent item at file offset 0 refers only to the first
   128K of the shared extent.

   After this clone operation, the file size (and eof) at the receiver is
   increased from 1M to 1088K (1M + 64K);

3) Now there's still 896K (960K - 64K) of data left to clone or write, so
   it checks for the next file extent item, which starts at file offset
   128K. This file extent item has a data offset of 0 and a length of
   256K, so a clone operation with a source range offset of 256K, a
   destination offset of 1088K (1M + 64K) and length of 128K is issued.

   After this operation the file size (and eof) at the receiver increases
   from 1088K to 1216K (1088K + 128K);

4) Now there's still 768K (896K - 128K) of data left to clone or write, so
   it checks for the next file extent item, located at file offset 384K.
   This file extent item points to a different extent, not the one we want
   to clone, with a length of 640K. So we issue a write operation into the
   file range 1216K (1088K + 128K, end of the last clone operation), with
   a length of 640K and with a data matching the one we can find for that
   range in send root.

   After this operation, the file size (and eof) at the receiver increases
   from 1216K to 1856K (1216K + 640K);

5) Now there's still 128K (768K - 640K) of data left to clone or write, so
   we look into the file extent item, which is for file offset 1M and it
   points to the extent we want to clone, with a data offset of 64K and a
   length of 960K.

   However this matches the file offset we started with, the start of the
   range to clone into. So we can't for sure find any file extent item
   from here onwards with the rest of the data we want to clone, yet we
   proceed and since the file extent item points to the shared extent,
   with a data offset of 64K, we issue a clone operation with a source
   range starting at file offset 1856K, which matches the file extent
   item's offset, 1M, plus the amount of data cloned and written so far,
   which is 64K (step 2) + 128K (step 3) + 640K (step 4). This clone
   operation is invalid since the source range offset matches the current
   eof of the file in the receiver. We should have stopped looking for
   extents to clone at this point and instead fallback to write, which
   would simply the contain the data in the file range from 1856K to
   1856K + 128K.

So fix this by stopping the loop that looks for file ranges to clone at
clone_range() when we reach the current eof of the file being processed,
if we are cloning from the same file and using the send root as the clone
root. This ensures any data not yet cloned will be sent to the receiver
through a write operation.

A test case for fstests will follow soon.

Reported-by: Massimo B. <massimo.b@gmx.net>
Link: https://lore.kernel.org/linux-btrfs/6ae34776e85912960a253a8327068a892998e685.camel@gmx.net/
Fixes: 11f2069c113e ("Btrfs: send, allow clone operations within the same file")
CC: stable@vger.kernel.org # 5.5+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't clear ret in btrfs_start_dirty_block_groups

commit 34d1eb0e599875064955a74712f08ff14c8e3d5f upstream.

If we fail to update a block group item in the loop we'll break, however
we'll do btrfs_run_delayed_refs and lose our error value in ret, and
thus not clean up properly.  Fix this by only running the delayed refs
if there was no failure.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: fix lockdep splat in btrfs_recover_relocation

commit fb286100974e7239af243bc2255a52f29442f9c8 upstream.

While testing the error paths of relocation I hit the following lockdep
splat:

  ======================================================
  WARNING: possible circular locking dependency detected
  5.10.0-rc6+ #217 Not tainted
  ------------------------------------------------------
  mount/779 is trying to acquire lock:
  ffffa0e676945418 (&fs_info->balance_mutex){+.+.}-{3:3}, at: btrfs_recover_balance+0x2f0/0x340

  but task is already holding lock:
  ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100

  which lock already depends on the new lock.

  the existing dependency chain (in reverse order) is:

  -> #2 (btrfs-root-00){++++}-{3:3}:
 down_read_nested+0x43/0x130
 __btrfs_tree_read_lock+0x27/0x100
 btrfs_read_lock_root_node+0x31/0x40
 btrfs_search_slot+0x462/0x8f0
 btrfs_update_root+0x55/0x2b0
 btrfs_drop_snapshot+0x398/0x750
 clean_dirty_subvols+0xdf/0x120
 btrfs_recover_relocation+0x534/0x5a0
 btrfs_start_pre_rw_mount+0xcb/0x170
 open_ctree+0x151f/0x1726
 btrfs_mount_root.cold+0x12/0xea
 legacy_get_tree+0x30/0x50
 vfs_get_tree+0x28/0xc0
 vfs_kern_mount.part.0+0x71/0xb0
 btrfs_mount+0x10d/0x380
 legacy_get_tree+0x30/0x50
 vfs_get_tree+0x28/0xc0
 path_mount+0x433/0xc10
 __x64_sys_mount+0xe3/0x120
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #1 (sb_internal#2){.+.+}-{0:0}:
 start_transaction+0x444/0x700
 insert_balance_item.isra.0+0x37/0x320
 btrfs_balance+0x354/0xf40
 btrfs_ioctl_balance+0x2cf/0x380
 __x64_sys_ioctl+0x83/0xb0
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  -> #0 (&fs_info->balance_mutex){+.+.}-{3:3}:
 __lock_acquire+0x1120/0x1e10
 lock_acquire+0x116/0x370
 __mutex_lock+0x7e/0x7b0
 btrfs_recover_balance+0x2f0/0x340
 open_ctree+0x1095/0x1726
 btrfs_mount_root.cold+0x12/0xea
 legacy_get_tree+0x30/0x50
 vfs_get_tree+0x28/0xc0
 vfs_kern_mount.part.0+0x71/0xb0
 btrfs_mount+0x10d/0x380
 legacy_get_tree+0x30/0x50
 vfs_get_tree+0x28/0xc0
 path_mount+0x433/0xc10
 __x64_sys_mount+0xe3/0x120
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

  other info that might help us debug this:

  Chain exists of:
    &fs_info->balance_mutex --> sb_internal#2 --> btrfs-root-00

   Possible unsafe locking scenario:

 CPU0                    CPU1
 ----                    ----
    lock(btrfs-root-00);
 lock(sb_internal#2);
 lock(btrfs-root-00);
    lock(&fs_info->balance_mutex);

   *** DEADLOCK ***

  2 locks held by mount/779:
   #0: ffffa0e60dc040e0 (&type->s_umount_key#47/1){+.+.}-{3:3}, at: alloc_super+0xb5/0x380
   #1: ffffa0e60ee31da8 (btrfs-root-00){++++}-{3:3}, at: __btrfs_tree_read_lock+0x27/0x100

  stack backtrace:
  CPU: 0 PID: 779 Comm: mount Not tainted 5.10.0-rc6+ #217
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
  Call Trace:
   dump_stack+0x8b/0xb0
   check_noncircular+0xcf/0xf0
   ? trace_call_bpf+0x139/0x260
   __lock_acquire+0x1120/0x1e10
   lock_acquire+0x116/0x370
   ? btrfs_recover_balance+0x2f0/0x340
   __mutex_lock+0x7e/0x7b0
   ? btrfs_recover_balance+0x2f0/0x340
   ? btrfs_recover_balance+0x2f0/0x340
   ? rcu_read_lock_sched_held+0x3f/0x80
   ? kmem_cache_alloc_trace+0x2c4/0x2f0
   ? btrfs_get_64+0x5e/0x100
   btrfs_recover_balance+0x2f0/0x340
   open_ctree+0x1095/0x1726
   btrfs_mount_root.cold+0x12/0xea
   ? rcu_read_lock_sched_held+0x3f/0x80
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   vfs_kern_mount.part.0+0x71/0xb0
   btrfs_mount+0x10d/0x380
   ? __kmalloc_track_caller+0x2f2/0x320
   legacy_get_tree+0x30/0x50
   vfs_get_tree+0x28/0xc0
   ? capable+0x3a/0x60
   path_mount+0x433/0xc10
   __x64_sys_mount+0xe3/0x120
   do_syscall_64+0x33/0x40
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This is straightforward to fix, simply release the path before we setup
the balance_ctl.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: do not double free backref nodes on error

commit 49ecc679ab48b40ca799bf94b327d5284eac9e46 upstream.

Zygo reported the following KASAN splat:

  BUG: KASAN: use-after-free in btrfs_backref_cleanup_node+0x18a/0x420
  Read of size 8 at addr ffff888112402950 by task btrfs/28836

  CPU: 0 PID: 28836 Comm: btrfs Tainted: G        W         5.10.0-e35f27394290-for-next+ #23
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
  Call Trace:
   dump_stack+0xbc/0xf9
   ? btrfs_backref_cleanup_node+0x18a/0x420
   print_address_description.constprop.8+0x21/0x210
   ? record_print_text.cold.34+0x11/0x11
   ? btrfs_backref_cleanup_node+0x18a/0x420
   ? btrfs_backref_cleanup_node+0x18a/0x420
   kasan_report.cold.10+0x20/0x37
   ? btrfs_backref_cleanup_node+0x18a/0x420
   __asan_load8+0x69/0x90
   btrfs_backref_cleanup_node+0x18a/0x420
   btrfs_backref_release_cache+0x83/0x1b0
   relocate_block_group+0x394/0x780
   ? merge_reloc_roots+0x4a0/0x4a0
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   ? check_flags.part.50+0x6c/0x1e0
   ? btrfs_relocate_chunk+0x120/0x120
   ? kmem_cache_alloc_trace+0xa06/0xcb0
   ? _copy_from_user+0x83/0xc0
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   ? __kasan_check_read+0x11/0x20
   ? check_chain_key+0x1f4/0x2f0
   ? __asan_loadN+0xf/0x20
   ? btrfs_ioctl_get_supported_features+0x30/0x30
   ? kvm_sched_clock_read+0x18/0x30
   ? check_chain_key+0x1f4/0x2f0
   ? lock_downgrade+0x3f0/0x3f0
   ? handle_mm_fault+0xad6/0x2150
   ? do_vfs_ioctl+0xfc/0x9d0
   ? ioctl_file_clone+0xe0/0xe0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags.part.50+0x6c/0x1e0
   ? check_flags+0x26/0x30
   ? lock_is_held_type+0xc3/0xf0
   ? syscall_enter_from_user_mode+0x1b/0x60
   ? do_syscall_64+0x13/0x80
   ? rcu_read_lock_sched_held+0xa1/0xd0
   ? __kasan_check_read+0x11/0x20
   ? __fget_light+0xae/0x110
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9
  RIP: 0033:0x7f4c4bdfe427

  Allocated by task 28836:
   kasan_save_stack+0x21/0x50
   __kasan_kmalloc.constprop.18+0xbe/0xd0
   kasan_kmalloc+0x9/0x10
   kmem_cache_alloc_trace+0x410/0xcb0
   btrfs_backref_alloc_node+0x46/0xf0
   btrfs_backref_add_tree_node+0x60d/0x11d0
   build_backref_tree+0xc5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

  Freed by task 28836:
   kasan_save_stack+0x21/0x50
   kasan_set_track+0x20/0x30
   kasan_set_free_info+0x1f/0x30
   __kasan_slab_free+0xf3/0x140
   kasan_slab_free+0xe/0x10
   kfree+0xde/0x200
   btrfs_backref_error_cleanup+0x452/0x530
   build_backref_tree+0x1a5/0x700
   relocate_tree_blocks+0x2be/0xb90
   relocate_block_group+0x2eb/0x780
   btrfs_relocate_block_group+0x26e/0x4c0
   btrfs_relocate_chunk+0x52/0x120
   btrfs_balance+0xe2e/0x1900
   btrfs_ioctl_balance+0x3a7/0x460
   btrfs_ioctl+0x24c8/0x4360
   __x64_sys_ioctl+0xc3/0x100
   do_syscall_64+0x37/0x80
   entry_SYSCALL_64_after_hwframe+0x44/0xa9

This occurred because we freed our backref node in
btrfs_backref_error_cleanup(), but then tried to free it again in
btrfs_backref_release_cache().  This is because
btrfs_backref_release_cache() will cycle through all of the
cache->leaves nodes and free them up.  However
btrfs_backref_error_cleanup() freed the backref node with
btrfs_backref_free_node(), which simply kfree()d the backref node
without unlinking it from the cache.  Change this to a
btrfs_backref_drop_node(), which does the appropriate cleanup and
removes the node from the cache->leaves list, so when we go to free the
remaining cache we don't trip over items we've already dropped.

Fixes: 75bfb9aff45e ("Btrfs: cleanup error handling in build_backref_tree")
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: don't get an EINTR during drop_snapshot for reloc

commit 18d3bff411c8d46d40537483bdc0b61b33ce0371 upstream.

This was partially fixed by f3e3d9cc3525 ("btrfs: avoid possible signal
interruption of btrfs_drop_snapshot() on relocation tree"), however it
missed a spot when we restart a trans handle because we need to end the
transaction.  The fix is the same, simply use btrfs_join_transaction()
instead of btrfs_start_transaction() when deleting reloc roots.

Fixes: f3e3d9cc3525 ("btrfs: avoid possible signal interruption of btrfs_drop_snapshot() on relocation tree")
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ACPI: scan: Make acpi_bus_get_device() clear return pointer on error

commit 78a18fec5258c8df9435399a1ea022d73d3eceb9 upstream.

Set the acpi_device pointer which acpi_bus_get_device() returns-by-
reference to NULL on errors.

We've recently had 2 cases where callers of acpi_bus_get_device()
did not properly error check the return value, so set the returned-
by-reference acpi_device pointer to NULL, because at least some
callers of acpi_bus_get_device() expect that to be done on errors.

[ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan:
  Defer enumeration of devices with _DEP lists") which caused it to
  be much more likely to occur on some systems, but the real defect
  had been introduced by an earlier commit. ]

Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA")
Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device")
Reported-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Diagnosed-by: Rafael J. Wysocki <rafael@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Cc: All applicable <stable@vger.kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dm crypt: fix copy and paste bug in crypt_alloc_req_aead

commit 004b8ae9e2de55ca7857ba8471209dd3179e088c upstream.

In commit d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating
crypto requests from softirq") code was incorrectly copy and pasted
from crypt_alloc_req_skcipher()'s crypto request allocation code to
crypt_alloc_req_aead(). It is OK from runtime perspective as both
simple encryption request pointer and AEAD request pointer are part of
a union, but may confuse code reviewers.

Fixes: d68b29584c25 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: xor - Fix divide error in do_xor_speed()

commit 3c02e04fd4f57130e4fa75fab6f528f7a52db9b5 upstream.

crypto: Fix divide error in do_xor_speed()

From: Kirill Tkhai <ktkhai@virtuozzo.com>

Latest (but not only latest) linux-next panics with divide
error on my QEMU setup.

The patch at the bottom of this message fixes the problem.

xor: measuring software checksum speed
divide error: 0000 [#1] PREEMPT SMP KASAN
PREEMPT SMP KASAN
CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.10.0-next-20201223+ #2177
RIP: 0010:do_xor_speed+0xbb/0xf3
Code: 41 ff cc 75 b5 bf 01 00 00 00 e8 3d 23 8b fe 65 8b 05 f6 49 83 7d 85 c0 75 05 e8
 84 70 81 fe b8 00 00 50 c3 31 d2 48 8d 7b 10 <f7> f5 41 89 c4 e8 58 07 a2 fe 44 89 63 10 48 8d 7b 08
 e8 cb 07 a2
RSP: 0000:ffff888100137dc8 EFLAGS: 00010246
RAX: 00000000c3500000 RBX: ffffffff823f0160 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000808 RDI: ffffffff823f0170
RBP: 0000000000000000 R08: ffffffff8109c50f R09: ffffffff824bb6f7
R10: fffffbfff04976de R11: 0000000000000001 R12: 0000000000000000
R13: ffff888101997000 R14: ffff888101994000 R15: ffffffff823f0178
FS:  0000000000000000(0000) GS:ffff8881f7780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000000220e000 CR4: 00000000000006a0
Call Trace:
 calibrate_xor_blocks+0x13c/0x1c4
 ? do_xor_speed+0xf3/0xf3
 do_one_initcall+0xc1/0x1b7
 ? start_kernel+0x373/0x373
 ? unpoison_range+0x3a/0x60
 kernel_init_freeable+0x1dd/0x238
 ? rest_init+0xc6/0xc6
 kernel_init+0x8/0x10a
 ret_from_fork+0x1f/0x30
---[ end trace 5bd3c1d0b77772da ]---

Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking")
Cc: <stable@vger.kernel.org>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/via: Add minimum mute flag

commit 67ea698c3950d10925be33c21ca49ffb64e21842 upstream.

It turned out that VIA codecs also mute the sound in the lowest mixer
level.  Turn on the dac_min_mute flag to indicate the mute-as-minimum
in TLV like already done in Conexant and IDT codecs.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210114072453.11379-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T

commit 495dc7637cb5ca8e39c46db818328410bb6e73a1 upstream.

The Acer Apire E5-575T laptop with codec ALC255 has a terrible
background noise comes from internal mic capture. And the jack
sensing dose not work for headset like some other Acer laptops.

This patch limits the internal mic boost on top of the existing
ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T.

Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210114082728.74729-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()

commit 217bfbb8b0bfa24619b11ab75c135fec99b99b20 upstream.

snd_seq_oss_synth_make_info() didn't check the error code from
snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy()
with the uninitialized string as the source, which may lead to the
access over the limit.

Add the proper error check for avoiding the failure.

Reported-by: syzbot+e42504ff21cff05a595f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210115093428.15882-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634

commit f419e5940f1d9892ea6f45acdaca572b9e73ff39 upstream.

Newer ideapads (e.g.: Yoga 14s, 720S 14) come with ELAN0634 touchpad do not
use EC to switch touchpad.

Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Writing VPCCMD_W_TOUCHPAD may cause a spurious key press.

Add has_touchpad_switch to workaround these machines.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: stable@vger.kernel.org # 5.4+
--
v2: Specify touchpad to ELAN0634
v3: Stupid missing ! in v2
v4: Correct acpi_dev_present usage (Hans)
Link: https://lore.kernel.org/r/20210107144438.12605-1-jiaxun.yang@flygoat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes

commit 9bba96275576da0cf78ede62aeb2fc975ed8a32d upstream.

There are several reports about the tps6598x causing
interrupt flood on boards with the INT3515 ACPI node, which
then causes instability. There appears to be several
problems with the interrupt. One problem is that the
I2CSerialBus resources do not always map to the Interrupt
resource with the same index, but that is not the only
problem. We have not been able to come up with a solution
for all the issues, and because of that disabling the device
for now.

The PD controller on these platforms is autonomous, and the
purpose for the driver is primarily to supply status to the
userspace, so this will not affect any functionality.

Reported-by: Moody Salem <moody@uniswap.org>
Fixes: a3dd034a1707 ("ACPI / scan: Create platform device for INT3515 ACPI nodes")
Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1883511
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20201223143644.33341-1-heikki.krogerus@linux.intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: bpmp-tegra: Ignore unknown I2C_M flags

commit bc1c2048abbe3c3074b4de91d213595c57741a6b upstream.

In order to not to start returning errors when new I2C_M flags are
added, change behavior to just ignore all flags that we don't know
about. This includes the I2C_M_DMA_SAFE flag that already exists but
causes -EINVAL to be returned for valid transactions.

Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i2c: tegra: Wait for config load atomically while in ISR

commit 27b7c6e096264cc7b91bb80a4f65f8c0a66f079f upstream.

Upon a communication error, the interrupt handler can call
tegra_i2c_disable_packet_mode. This causes a sleeping poll to happen
unless the current transaction was marked atomic. Fix this by
making the poll happen atomically if we are in an IRQ.

This matches the behavior prior to the patch mentioned
in the Fixes tag.

Fixes: ede2299f7101 ("i2c: tegra: Support atomic transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine

commit 3c97be6982e689d7b2430187a11f8c78e573abdb upstream.

I have been fooled by the logic picking the right ECC engine which is
spread across two functions: *init_module() and *_attach(). I thought
this driver was not impacted by the recent changes around the ECC
engines DT parsing logic but in fact it is.

Reported-by: kernel test robot <oliver.sang@intel.com>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20210104093057.31178-1-miquel.raynal@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload

commit 4883a60c17eda6bf52d1c817ee7ead65b4a02da2 upstream.

Re-add the multiply by 8 to "step * eccsize" to correct the destination bit offset
when extracting the data payload in gpmi_ecc_read_page_raw().

Fixes: e5e5631cc889 ("mtd: rawnand: gpmi: Use nand_extract_bits()")
Cc: stable@vger.kernel.org
Reported-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Sean Nyekjaer <sean@geanix.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20201221100013.2715675-1-sean@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

scsi: target: tcmu: Fix use-after-free of se_cmd->priv

commit 780e1384687d6ecdee9ca789a1027610484ac8a2 upstream.

Commit a35129024e88 ("scsi: target: tcmu: Use priv pointer in se_cmd")
modified tcmu_free_cmd() to set NULL to priv pointer in se_cmd. However,
se_cmd can be already freed by work queue triggered in
target_complete_cmd(). This caused BUG KASAN use-after-free [1].

To fix the bug, do not touch priv pointer in tcmu_free_cmd(). Instead, set
NULL to priv pointer before target_complete_cmd() calls. Also, to avoid
unnecessary priv pointer change in tcmu_queue_cmd(), modify priv pointer in
the function only when tcmu_free_cmd() is not called.

[1]
BUG: KASAN: use-after-free in tcmu_handle_completions+0x1172/0x1770 [target_core_user]
Write of size 8 at addr ffff88814cf79a40 by task cmdproc-uio0/14842

CPU: 2 PID: 14842 Comm: cmdproc-uio0 Not tainted 5.11.0-rc2 #1
Hardware name: Supermicro Super Server/X10SRL-F, BIOS 3.2 11/22/2019
Call Trace:
 dump_stack+0x9a/0xcc
 ? tcmu_handle_completions+0x1172/0x1770 [target_core_user]
 print_address_description.constprop.0+0x18/0x130
 ? tcmu_handle_completions+0x1172/0x1770 [target_core_user]
 ? tcmu_handle_completions+0x1172/0x1770 [target_core_user]
 kasan_report.cold+0x7f/0x10e
 ? tcmu_handle_completions+0x1172/0x1770 [target_core_user]
 tcmu_handle_completions+0x1172/0x1770 [target_core_user]
 ? queue_tmr_ring+0x5d0/0x5d0 [target_core_user]
 tcmu_irqcontrol+0x28/0x60 [target_core_user]
 uio_write+0x155/0x230
 ? uio_vma_fault+0x460/0x460
 ? security_file_permission+0x4f/0x440
 vfs_write+0x1ce/0x860
 ksys_write+0xe9/0x1b0
 ? __ia32_sys_read+0xb0/0xb0
 ? syscall_enter_from_user_mode+0x27/0x70
 ? trace_hardirqs_on+0x1c/0x110
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7fcf8b61905f
Code: 89 54 24 18 48 89 74 24 10 89 7c 24 08 e8 b9 fc ff ff 48 8b 54 24 18 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 31 44 89 c7 48 89 44 24 08 e8 0c fd ff ff 48
RSP: 002b:00007fcf7b3e6c30 EFLAGS: 00000293 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fcf8b61905f
RDX: 0000000000000004 RSI: 00007fcf7b3e6c78 RDI: 000000000000000c
RBP: 00007fcf7b3e6c80 R08: 0000000000000000 R09: 00007fcf7b3e6aa8
R10: 000000000b01c000 R11: 0000000000000293 R12: 00007ffe0c32a52e
R13: 00007ffe0c32a52f R14: 0000000000000000 R15: 00007fcf7b3e7640

Allocated by task 383:
 kasan_save_stack+0x1b/0x40
 ____kasan_kmalloc.constprop.0+0x84/0xa0
 kmem_cache_alloc+0x142/0x330
 tcm_loop_queuecommand+0x2a/0x4e0 [tcm_loop]
 scsi_queue_rq+0x12ec/0x2d20
 blk_mq_dispatch_rq_list+0x30a/0x1db0
 __blk_mq_do_dispatch_sched+0x326/0x830
 __blk_mq_sched_dispatch_requests+0x2c8/0x3f0
 blk_mq_sched_dispatch_requests+0xca/0x120
 __blk_mq_run_hw_queue+0x93/0xe0
 process_one_work+0x7b6/0x1290
 worker_thread+0x590/0xf80
 kthread+0x362/0x430
 ret_from_fork+0x22/0x30

Freed by task 11655:
 kasan_save_stack+0x1b/0x40
 kasan_set_track+0x1c/0x30
 kasan_set_free_info+0x20/0x30
 ____kasan_slab_free+0xec/0x120
 slab_free_freelist_hook+0x53/0x160
 kmem_cache_free+0xf4/0x5c0
 target_release_cmd_kref+0x3ea/0x9e0 [target_core_mod]
 transport_generic_free_cmd+0x28b/0x2f0 [target_core_mod]
 target_complete_ok_work+0x250/0xac0 [target_core_mod]
 process_one_work+0x7b6/0x1290
 worker_thread+0x590/0xf80
 kthread+0x362/0x430
 ret_from_fork+0x22/0x30

Last potentially related work creation:
 kasan_save_stack+0x1b/0x40
 kasan_record_aux_stack+0xa3/0xb0
 insert_work+0x48/0x2e0
 __queue_work+0x4e8/0xdf0
 queue_work_on+0x78/0x80
 tcmu_handle_completions+0xad0/0x1770 [target_core_user]
 tcmu_irqcontrol+0x28/0x60 [target_core_user]
 uio_write+0x155/0x230
 vfs_write+0x1ce/0x860
 ksys_write+0xe9/0x1b0
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Second to last potentially related work creation:
 kasan_save_stack+0x1b/0x40
 kasan_record_aux_stack+0xa3/0xb0
 insert_work+0x48/0x2e0
 __queue_work+0x4e8/0xdf0
 queue_work_on+0x78/0x80
 tcm_loop_queuecommand+0x1c3/0x4e0 [tcm_loop]
 scsi_queue_rq+0x12ec/0x2d20
 blk_mq_dispatch_rq_list+0x30a/0x1db0
 __blk_mq_do_dispatch_sched+0x326/0x830
 __blk_mq_sched_dispatch_requests+0x2c8/0x3f0
 blk_mq_sched_dispatch_requests+0xca/0x120
 __blk_mq_run_hw_queue+0x93/0xe0
 process_one_work+0x7b6/0x1290
 worker_thread+0x590/0xf80
 kthread+0x362/0x430
 ret_from_fork+0x22/0x30

The buggy address belongs to the object at ffff88814cf79800 which belongs
to the cache tcm_loop_cmd_cache of size 896.

Link: https://lore.kernel.org/r/20210113024508.1264992-1-shinichiro.kawasaki@wdc.com
Fixes: a35129024e88 ("scsi: target: tcmu: Use priv pointer in se_cmd")
Cc: stable@vger.kernel.org # v5.9+
Acked-by: Bodo Stroesser <bostroesser@gmail.com>
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Linux 5.10.10

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Pavel Machek (CIP) <pavel@denx.de>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20210122135735.652681690@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: cadence: cache reference clock rate during probe

commit 4d163ad79b155c71bf30366dc38f8d2502f78844 upstream.

The issue is that using SPI from a callback under the CCF lock will
deadlock, since this code uses clk_get_rate().

Fixes: c474b38665463 ("spi: Add driver for Cadence SPI controller")
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20210114154217.51996-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

spi: fsl: Fix driver breakage when SPI_CS_HIGH is not set in spi->mode

commit 7a2da5d7960a64ee923fe3e31f01a1101052c66f upstream.

Commit 766c6b63aa04 ("spi: fix client driver breakages when using GPIO
descriptors") broke fsl spi driver.

As now we fully rely on gpiolib for handling the polarity of
chip selects, the driver shall not alter the GPIO value anymore
when SPI_CS_HIGH is not set in spi->mode.

Fixes: 766c6b63aa04 ("spi: fix client driver breakages when using GPIO descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/6b51cc2bfbca70d3e9b9da7b7aa4c7a9d793ca0e.1610629002.git.christophe.leroy@csgroup.eu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

cxgb4/chtls: Fix tid stuck due to wrong update of qid

commit 8ad2a970d2010add3963e7219eb50367ab3fa4eb upstream.

TID stuck is seen when there is a race in
CPL_PASS_ACCEPT_RPL/CPL_ABORT_REQ and abort is arriving
before the accept reply, which sets the queue number.
In this case HW ends up sending CPL_ABORT_RPL_RSS to an
incorrect ingress queue.

V1->V2:
- Removed the unused variable len in chtls_set_quiesce_ctrl().

V2->V3:
- As kfree_skb() has a check for null skb, so removed this
check before calling kfree_skb() in func chtls_send_reset().

Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition")
Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com>
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Link: https://lore.kernel.org/r/20210112053600.24590-1-ayush.sawal@chelsio.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: unbind all switches from tree when DSA master unbinds

commit 07b90056cb15ff9877dca0d8f1b6583d1051f724 upstream.

Currently the following happens when a DSA master driver unbinds while
there are DSA switches attached to it:

$ echo 0000:00:00.5 > /sys/bus/pci/drivers/mscc_felix/unbind
------------[ cut here ]------------
WARNING: CPU: 0 PID: 392 at net/core/dev.c:9507
Call trace:
 rollback_registered_many+0x5fc/0x688
 unregister_netdevice_queue+0x98/0x120
 dsa_slave_destroy+0x4c/0x88
 dsa_port_teardown.part.16+0x78/0xb0
 dsa_tree_teardown_switches+0x58/0xc0
 dsa_unregister_switch+0x104/0x1b8
 felix_pci_remove+0x24/0x48
 pci_device_remove+0x48/0xf0
 device_release_driver_internal+0x118/0x1e8
 device_driver_detach+0x28/0x38
 unbind_store+0xd0/0x100

Located at the above location is this WARN_ON:

/* Notifier chain MUST detach us all upper devices. */
WARN_ON(netdev_has_any_upper_dev(dev));

Other stacked interfaces, like VLAN, do indeed listen for
NETDEV_UNREGISTER on the real_dev and also unregister themselves at that
time, which is clearly the behavior that rollback_registered_many
expects. But DSA interfaces are not VLAN. They have backing hardware
(platform devices, PCI devices, MDIO, SPI etc) which have a life cycle
of their own and we can't just trigger an unregister from the DSA
framework when we receive a netdev notifier that the master unregisters.

Luckily, there is something we can do, and that is to inform the driver
core that we have a runtime dependency to the DSA master interface's
device, and create a device link where that is the supplier and we are
the consumer. Having this device link will make the DSA switch unbind
before the DSA master unbinds, which is enough to avoid the WARN_ON from
rollback_registered_many.

Note that even before the blamed commit, DSA did nothing intelligent
when the master interface got unregistered either. See the discussion
here:
https://lore.kernel.org/netdev/20200505210253.20311-1-f.fainelli@gmail.com/
But this time, at least the WARN_ON is loud enough that the
upper_dev_link commit can be blamed.

The advantage with this approach vs dev_hold(master) in the attached
link is that the latter is not meant for long term reference counting.
With dev_hold, the only thing that will happen is that when the user
attempts an unbind of the DSA master, netdev_wait_allrefs will keep
waiting and waiting, due to DSA keeping the refcount forever. DSA would
not access freed memory corresponding to the master interface, but the
unbind would still result in a freeze. Whereas with device links,
graceful teardown is ensured. It even works with cascaded DSA trees.

$ echo 0000:00:00.2 > /sys/bus/pci/drivers/fsl_enetc/unbind
[ 1818.797546] device swp0 left promiscuous mode
[ 1819.301112] sja1105 spi2.0: Link is Down
[ 1819.307981] DSA: tree 1 torn down
[ 1819.312408] device eno2 left promiscuous mode
[ 1819.656803] mscc_felix 0000:00:00.5: Link is Down
[ 1819.667194] DSA: tree 0 torn down
[ 1819.711557] fsl_enetc 0000:00:00.2 eno2: Link is Down

This approach allows us to keep the DSA framework absolutely unchanged,
and the driver core will just know to unbind us first when the master
goes away - as opposed to the large (and probably impossible) rework
required if attempting to listen for NETDEV_UNREGISTER.

As per the documentation at Documentation/driver-api/device_link.rst,
specifying the DL_FLAG_AUTOREMOVE_CONSUMER flag causes the device link
to be automatically purged when the consumer fails to probe or later
unbinds. So we don't need to keep the consumer_link variable in struct
dsa_switch.

Fixes: 2f1e8ea726e9 ("net: dsa: link interfaces with the DSA master to get rid of lockdep warnings")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210111230943.3701806-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: check if atf has been disabled in __ieee80211_schedule_txq

commit c13cf5c159660451c8fbdc37efb998b198e1d305 upstream.

Check if atf has been disabled in __ieee80211_schedule_txq() in order to
avoid a given sta is always put to the beginning of the active_txqs list
and never moved to the end since deficit is not decremented in
ieee80211_sta_register_airtime()

Fixes: b4809e9484da1 ("mac80211: Add airtime accounting and scheduling to TXQs")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/93889406c50f1416214c079ca0b8c9faecc5143e.1608975195.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: do not drop tx nulldata packets on encrypted links

commit 2463ec86cd0338a2c2edbfb0b9d50c52ff76ff43 upstream.

ieee80211_tx_h_select_key drops any non-mgmt packets without a key when
encryption is used. This is wrong for nulldata packets that can't be
encrypted and are sent out for probing clients and indicating 4-address
mode.

Reported-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Fixes: a0761a301746 ("mac80211: drop data frames without key on encrypted links")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20201218191525.1168-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drm/panel: otm8009a: allow using non-continuous dsi clock

commit 880ee3b7615e7cc087f659cb80ce22f5db56f9a2 upstream.

The panel is able to work when dsi clock is non-continuous, thus
the system power consumption can be reduced using such feature.

Add MIPI_DSI_CLOCK_NON_CONTINUOUS to panel's mode_flags.

Changes in v2:
  - Added my signed-off

Signed-off-by: Antonio Borneo <antonio.borneo@st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@st.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200922074253.28810-1-yannick.fertre@st.com
Cc: "Alex G." <mr.nuke.me@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: mcp251xfd: mcp251xfd_handle_rxif_one(): fix wrong NULL pointer check

[ Upstream commit ca4c6ebeeb50112f5178f14bfb6d9e8ddf148545 ]

If alloc_canfd_skb() returns NULL, 'cfg' is an uninitialized variable, so we
should check 'skb' rather than 'cfd' after calling alloc_canfd_skb(priv->ndev,
&cfd).

Fixes: 55e5b97f003e ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210113073100.79552-1-miaoqinglang@huawei.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: use __napi_schedule() for PREEMPT_RT

[ Upstream commit 1f02efd1bb35bee95feed6aab46d1217f29d555b ]

Use of __napi_schedule_irqoff() is not safe with PREEMPT_RT in which
hard interrupts are not disabled while running the threaded interrupt.

Using __napi_schedule() works for both PREEMPT_RT and mainline Linux,
just at the cost of an additional check if interrupts are disabled for
mainline (since they are already disabled).

Similar to the fix done for enetc commit 215602a8d212 ("enetc: use
napi_schedule to be compatible with PREEMPT_RT")

Signed-off-by: Seb Laveze <sebastien.laveze@nxp.com>
Link: https://lore.kernel.org/r/20210112140121.1487619-1-sebastien.laveze@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Fix handling of an unsupported token type in rxrpc_read()

[ Upstream commit d52e419ac8b50c8bef41b398ed13528e75d7ad48 ]

Clang static analysis reports the following:

net/rxrpc/key.c:657:11: warning: Assigned value is garbage or undefined
                toksize = toksizes[tok++];
                        ^ ~~~~~~~~~~~~~~~

rxrpc_read() contains two consecutive loops.  The first loop calculates the
token sizes and stores the results in toksizes[] and the second one uses
the array.  When there is an error in identifying the token in the first
loop, the token is skipped, no change is made to the toksizes[] array.
When the same error happens in the second loop, the token is not skipped.
This will cause the toksizes[] array to be out of step and will overrun
past the calculated sizes.

Fix this by making both loops log a message and return an error in this
case.  This should only happen if a new token type is incompletely
implemented, so it should normally be impossible to trigger this.

Fixes: 9a059cd5ca7d ("rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read()")
Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/161046503122.2445787.16714129930607546635.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dsa: clear devlink port type before unregistering slave netdevs

[ Upstream commit 91158e1680b164c8d101144ca916a3dca10c3e17 ]

Florian reported a use-after-free bug in devlink_nl_port_fill found with
KASAN:

(devlink_nl_port_fill)
(devlink_port_notify)
(devlink_port_unregister)
(dsa_switch_teardown.part.3)
(dsa_tree_teardown_switches)
(dsa_unregister_switch)
(bcm_sf2_sw_remove)
(platform_remove)
(device_release_driver_internal)
(device_links_unbind_consumers)
(device_release_driver_internal)
(device_driver_detach)
(unbind_store)

Allocated by task 31:
 alloc_netdev_mqs+0x5c/0x50c
 dsa_slave_create+0x110/0x9c8
 dsa_register_switch+0xdb0/0x13a4
 b53_switch_register+0x47c/0x6dc
 bcm_sf2_sw_probe+0xaa4/0xc98
 platform_probe+0x90/0xf4
 really_probe+0x184/0x728
 driver_probe_device+0xa4/0x278
 __device_attach_driver+0xe8/0x148
 bus_for_each_drv+0x108/0x158

Freed by task 249:
 free_netdev+0x170/0x194
 dsa_slave_destroy+0xac/0xb0
 dsa_port_teardown.part.2+0xa0/0xb4
 dsa_tree_teardown_switches+0x50/0xc4
 dsa_unregister_switch+0x124/0x250
 bcm_sf2_sw_remove+0x98/0x13c
 platform_remove+0x44/0x5c
 device_release_driver_internal+0x150/0x254
 device_links_unbind_consumers+0xf8/0x12c
 device_release_driver_internal+0x84/0x254
 device_driver_detach+0x30/0x34
 unbind_store+0x90/0x134

What happens is that devlink_port_unregister emits a netlink
DEVLINK_CMD_PORT_DEL message which associates the devlink port that is
getting unregistered with the ifindex of its corresponding net_device.
Only trouble is, the net_device has already been unregistered.

It looks like we can stub out the search for a corresponding net_device
if we clear the devlink_port's type. This looks like a bit of a hack,
but also seems to be the reason why the devlink_port_type_clear function
exists in the first place.

Fixes: 3122433eb533 ("net: dsa: Register devlink ports before calling DSA driver setup()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian fainelli <f.fainelli@gmail.com>
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210112004831.3778323-1-olteanv@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: phy: smsc: fix clk error handling

[ Upstream commit a18caa97b1bda0a3d126a7be165ddcfc56c2dde6 ]

Commit bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in
support") added the phy clk support. The commit already checks if
clk_get_optional() throw an error but instead of returning the error it
ignores it.

Fixes: bedd8d78aba3 ("net: phy: smsc: LAN8710/20: add phy refclk in support")
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210111085932.28680-1-m.felsch@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

dt-bindings: net: renesas,etheravb: RZ/G2H needs tx-internal-delay-ps

[ Upstream commit f97844f9c518172f813b7ece18a9956b1f70c1bb ]

The merge resolution of the interaction of commits 307eea32b202864c
("dt-bindings: net: renesas,ravb: Add support for r8a774e1 SoC") and
d7adf6331189cbe9 ("dt-bindings: net: renesas,etheravb: Convert to
json-schema") missed that "tx-internal-delay-ps" should be a required
property on RZ/G2H.

Fixes: 8b0308fe319b8002 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210105151516.1540653-1-geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: avoid 32 x truesize under-estimation for tiny skbs

[ Upstream commit 3226b158e67cfaa677fd180152bfb28989cb2fac ]

Both virtio net and napi_get_frags() allocate skbs
with a very small skb->head

While using page fragments instead of a kmalloc backed skb->head might give
a small performance improvement in some cases, there is a huge risk of
under estimating memory usage.

For both GOOD_COPY_LEN and GRO_MAX_HEAD, we can fit at least 32 allocations
per page (order-3 page in x86), or even 64 on PowerPC

We have been tracking OOM issues on GKE hosts hitting tcp_mem limits
but consuming far more memory for TCP buffers than instructed in tcp_mem[2]

Even if we force napi_alloc_skb() to only use order-0 pages, the issue
would still be there on arches with PAGE_SIZE >= 32768

This patch makes sure that small skb head are kmalloc backed, so that
other objects in the slab page can be reused instead of being held as long
as skbs are sitting in socket queues.

Note that we might in the future use the sk_buff napi cache,
instead of going through a more expensive __alloc_skb()

Another idea would be to use separate page sizes depending
on the allocated length (to never have more than 4 frags per page)

I would like to thank Greg Thelen for his precious help on this matter,
analysing crash dumps is always a time consuming task.

Fixes: fd11a83dd363 ("net: Pull out core bits of __netdev_alloc_skb and add __napi_alloc_skb")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20210113161819.1155526-1-eric.dumazet@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: fix taprio configuration when base_time is in the past

[ Upstream commit fe28c53ed71d463e187748b6b10e1130dd72ceeb ]

The Synopsys TSN MAC supports Qbv base times in the past, but only up to a
certain limit. As a result, a taprio qdisc configuration with a small
base time (for example when treating the base time as a simple phase
offset) is not applied by the hardware and silently ignored.

This was observed on an NXP i.MX8MPlus device, but likely affects all
TSN-variants of the MAC.

Fix the issue by making sure the base time is in the future, pushing it by
an integer amount of cycle times if needed. (a similar check is already
done in several other taprio implementations, see for example
drivers/net/ethernet/intel/igc/igc_tsn.c#L116 or
drivers/net/dsa/sja1105/sja1105_ptp.h#L39).

Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-2-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: fix taprio schedule configuration

[ Upstream commit b76889ff51bfee318bea15891420e5aefd2833a0 ]

When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP
i.MX8MPlus device, the effective cycle time differed from the requested one
by N*96ns, with N number of entries in the Qbv Gate Control List. This is
because the driver was adding a 96ns margin to each interval of the GCL,
apparently to account for the IPG. The problem was observed on NXP
i.MX8MPlus devices but likely affected all devices relying on the same
configuration callback (dwmac 4.00, 4.10, 5.10 variants).

Fix the issue by removing the margins, and simply setup the MAC with the
provided cycle time value. This is the behavior expected by the user-space
API, as altering the Qbv schedule timings would break standards conformance.
This is also the behavior of several other Ethernet MAC implementations
supporting taprio, including the dwxgmac variant of stmmac.

Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+")
Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com>
Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: sit: unregister_netdevice on newlink's error path

[ Upstream commit 47e4bb147a96f1c9b4e7691e7e994e53838bfff8 ]

We need to unregister the netdevice if config failed.
.ndo_uninit takes care of most of the heavy lifting.

This was uncovered by recent commit c269a24ce057 ("net: make
free_netdev() more lenient with unregistering devices").
Previously the partially-initialized device would be left
in the system.

Reported-and-tested-by: syzbot+2393580080a2da190f04@syzkaller.appspotmail.com
Fixes: e2f1f072db8d ("sit: allow to configure 6rd tunnels via netlink")
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20210114012947.2515313-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: stmmac: Fixed mtu channged by cache aligned

[ Upstream commit 5b55299eed78538cc4746e50ee97103a1643249c ]

Since the original mtu is not used when the mtu is updated,
the mtu is aligned with cache, this will get an incorrect.
For example, if you want to configure the mtu to be 1500,
but mtu 1536 is configured in fact.

Fixed: eaf4fac478077 ("net: stmmac: Do not accept invalid MTU values")
Signed-off-by: David Wu <david.wu@rock-chips.com>
Link: https://lore.kernel.org/r/20210113034109.27865-1-david.wu@rock-chips.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

i40e: fix potential NULL pointer dereferencing

[ Upstream commit 7128c834d30e6b2cf649f14d8fc274941786d0e1 ]

Currently, the function i40e_construct_skb_zc only frees the input xdp
buffer when the output skb is successfully built. On error, the
function i40e_clean_rx_irq_zc does not commit anything for the current
packet descriptor and simply exits the packet descriptor processing
loop, with the plan to restart the processing of this descriptor on
the next invocation. Therefore, on error the ring next-to-clean
pointer should not advance, the xdp i.e. *bi buffer should not be
freed and the current buffer info should not be invalidated by setting
*bi to NULL. Therefore, the *bi should only be set to NULL when the
function i40e_construct_skb_zc is successful, otherwise a NULL *bi
will be dereferenced when the work for the current descriptor is
eventually restarted.

Fixes: 3b4f0b66c2b3 ("i40e, xsk: Migrate to new MEM_TYPE_XSK_BUFF_POOL")
Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Link: https://lore.kernel.org/r/20210111181138.49757-1-cristian.dumitrescu@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rxrpc: Call state should be read with READ_ONCE() under some circumstances

[ Upstream commit a95d25dd7b94a5ba18246da09b4218f132fed60e ]

The call state may be changed at any time by the data-ready routine in
response to received packets, so if the call state is to be read and acted
upon several times in a function, READ_ONCE() must be used unless the call
state lock is held.

As it happens, we used READ_ONCE() to read the state a few lines above the
unmarked read in rxrpc_input_data(), so use that value rather than
re-reading it.

Fixes: a158bdd3247b ("rxrpc: Fix call timeouts")
Signed-off-by: Baptiste Lepers <baptiste.lepers@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/161046715522.2450566.488819910256264150.stgit@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dcb: Accept RTM_GETDCB messages carrying set-like DCB commands

[ Upstream commit df85bc140a4d6cbaa78d8e9c35154e1a2f0622c7 ]

In commit 826f328e2b7e ("net: dcb: Validate netlink message in DCB
handler"), Linux started rejecting RTM_GETDCB netlink messages if they
contained a set-like DCB_CMD_ command.

The reason was that privileges were only verified for RTM_SETDCB messages,
but the value that determined the action to be taken is the command, not
the message type. And validation of message type against the DCB command
was the obvious missing piece.

Unfortunately it turns out that mlnx_qos, a somewhat widely deployed tool
for configuration of DCB, accesses the DCB set-like APIs through
RTM_GETDCB.

Therefore do not bounce the discrepancy between message type and command.
Instead, in addition to validating privileges based on the actual message
type, validate them also based on the expected message type. This closes
the loophole of allowing DCB configuration on non-admin accounts, while
maintaining backward compatibility.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Fixes: 826f328e2b7e ("net: dcb: Validate netlink message in DCB handler")
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/a3edcfda0825f2aa2591801c5232f2bbf2d8a554.1610384801.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: dcb: Validate netlink message in DCB handler

[ Upstream commit 826f328e2b7e8854dd42ea44e6519cd75018e7b1 ]

DCB uses the same handler function for both RTM_GETDCB and RTM_SETDCB
messages. dcb_doit() bounces RTM_SETDCB mesasges if the user does not have
the CAP_NET_ADMIN capability.

However, the operation to be performed is not decided from the DCB message
type, but from the DCB command. Thus DCB_CMD_*_GET commands are used for
reading DCB objects, the corresponding SET and DEL commands are used for
manipulation.

The assumption is that set-like commands will be sent via an RTM_SETDCB
message, and get-like ones via RTM_GETDCB. However, this assumption is not
enforced.

It is therefore possible to manipulate DCB objects without CAP_NET_ADMIN
capability by sending the corresponding command in an RTM_GETDCB message.
That is a bug. Fix it by validating the type of the request message against
the type used for the response.

Fixes: 2f90b8657ec9 ("ixgbe: this patch adds support for DCB to the kernel and ixgbe driver")
Signed-off-by: Petr Machata <me@pmachata.org>
Link: https://lore.kernel.org/r/a2a9b88418f3a58ef211b718f2970128ef9e3793.1608673640.git.me@pmachata.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>