Anthony Liguori [Fri, 22 Jan 2010 15:18:06 +0000 (09:18 -0600)]
Move out option lookup into a separate function
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Thu, 21 Jan 2010 16:30:29 +0000 (10:30 -0600)]
Support --sysconfdir in configure to specify path to configuration files
The default value is ${prefix}/etc/qemu. --sysconfdir can be used to override
the default to an absolute path. The expectation is that when installed to
/usr, --sysconfdir=/etc/qemu will be used.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Sun, 24 Jan 2010 14:28:21 +0000 (14:28 +0000)]
Sparc32: fix free-run timer
According to Sun4M System Architecture Manual chapter 5.3.2, a limit
of 0 will not generate interrupts.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Jan Kiszka [Sun, 24 Jan 2010 08:51:49 +0000 (09:51 +0100)]
Musicpal: Fix descriptor walk in eth_send
Commit
930c86820e introduced a regression to eth_send: eth_tx_desc_put
manipulates the host's tx descriptor copy before writing it back, but
two lines down the descriptor is evaluated again, leaving us with an
invalid next address if host and guest endianness differ. So this was
the actual issue commit
2e87c5b937 tried to paper over.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: malc <av1474@comtv.ru>
Jan Kiszka [Sat, 23 Jan 2010 17:51:22 +0000 (18:51 +0100)]
Musicpal: Fix wm8750 I2C address
Commit
b3a219883e uncovered that we attached the Wolfson with an I2C
address shifted left by one. Fixing this makes sound work again for
the Musicpal.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: malc <av1474@comtv.ru>
Artyom Tarasenko [Fri, 22 Jan 2010 21:31:53 +0000 (22:31 +0100)]
sparc32 fix np dereference in do_unassigned_access
fix a potential null pointer dereference introduced in
commit
576c2cdc767ab9e2dc038fa4c99f22e53287a3de
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Fri, 22 Jan 2010 18:39:49 +0000 (18:39 +0000)]
Sparc64: fix PCI probe problems
Byte swap PCI config values.
Remove old bogus PCI config mechanism so that device 0:0.0 can be probed.
This requires OpenBIOS r667.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Anthony Liguori [Wed, 20 Jan 2010 16:12:23 +0000 (10:12 -0600)]
Revert "block: prevent multiwrite_merge from creating too large iovecs"
This reverts commit
0076bc0c1d93adcbc7f1af184e04902cf37e9ab8.
Kevin Wolf pointed out that this breaks the mingw32 build.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Anthony Liguori [Wed, 20 Jan 2010 16:09:35 +0000 (10:09 -0600)]
make: qemu-img depends on config-host.h
Fixes mingw32 build out of tree.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Wed, 20 Jan 2010 13:37:33 +0000 (15:37 +0200)]
reduce number of reinjects on ACK
Windows 7 BSODs under load with HAL_RTC_IRQF_WILL_NOT_CLEAR error.
It happens here:
hal!HalpRtcUnmaskClock:
8281b93a 8bff mov edi,edi
8281b93c 56 push esi
8281b93d 33f6 xor esi,esi
8281b93f 6a0c push 0Ch
8281b941 e8b2ffffff call hal!CMOS_READ (
8281b8f8)
8281b946 84c0 test al,al
8281b948 7920 jns hal!HalpRtcUnmaskClock+0x30 (
8281b96a)
8281b94a 6a0a push 0Ah
8281b94c 46 inc esi
8281b94d e854c8ffff call hal!KeStallExecutionProcessor (
828181a6)
8281b952 83fe64 cmp esi,64h
8281b955 72e8 jb hal!HalpRtcUnmaskClock+0x5 (
8281b93f)
8281b957 6a00 push 0
8281b959 6a00 push 0
8281b95b 6a00 push 0
8281b95d 680a010000 push 10Ah
8281b962 6a5c push 5Ch
8281b964 ff1500c38082 call dword ptr [hal!_imp__KeBugCheckEx (
8280c300)]
8281b96a 5e pop esi
8281b96b c3 ret
So it loops for 100(64h) times reading register C before BSOD. Lets
reduce number of immediate reinjection well under this limit.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Tue, 19 Jan 2010 21:15:39 +0000 (22:15 +0100)]
block: prevent multiwrite_merge from creating too large iovecs
If we go over the maximum number of iovecs support by syscall we get
back EINVAL from the kernel which translate to I/O errors for the guest.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Sun, 17 Jan 2010 11:32:30 +0000 (12:32 +0100)]
block: fix cache flushing in bdrv_commit
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 12:37:59 +0000 (10:37 -0200)]
QMP: Fix asynchronous events delivery
Commit
f039a563f200beee80cc10fd70b21ea396979dab introduces
a regression as monitor_protocol_event() will return in
the first user Monitor it finds in the QLIST_FOREACH()
loop.
The right thing to do is to only delivery an asynchronous
event if the 'mon' is a QMP Monitor.
The aforementioned commit was an early version, if it was
applied to stable (it should) this one has to be applied
there too.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:40 +0000 (11:42 -0200)]
vnc: Use inet_strfamily()
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:39 +0000 (11:42 -0200)]
net: inet_strfamily(): Better unknown family report
Returning "????" is a bit meaningless, let's call it "unknown".
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Wed, 20 Jan 2010 13:42:38 +0000 (11:42 -0200)]
net: Make inet_strfamily() public
So that it can be used by other subsystems.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:58 +0000 (00:36 +0530)]
virtio-serial: Use MSI vectors for port virtqueues
This commit enables the use of MSI interrupts for virtqueue
notifications for ports. We use nr_ports + 1 (for control channel) msi
entries for the ports, as only the in_vq operations need an interrupt on
the guest.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:57 +0000 (00:36 +0530)]
Move virtio-serial to Makefile.objs
There's nothing target-dependent in the virtio-serial code so allow it
to be compiled just once for all the targets.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:56 +0000 (00:36 +0530)]
virtio-serial: Add a 'virtserialport' device for generic serial port support
This commit adds a simple chardev-based serial port. Any data the guest
sends is forwarded to the chardev and vice-versa.
Sample uses for such a device can be obtaining info from the guest like
the file systems used, apps installed, etc. for offline usage and
logged-in users, clipboard copy-paste, etc. for online usage.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:55 +0000 (00:36 +0530)]
virtio-serial-bus: Add ability to hot-unplug ports
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:54 +0000 (00:36 +0530)]
virtio-serial-bus: Add a port 'name' property for port discovery in guests
The port 'id' or number is internal state between the guest kernel and
our bus implementation. This is invocation-dependent and isn't part of
the guest-host ABI.
To correcly enumerate and map ports between the host and the guest, the
'name' property is used.
Example:
-device virtserialport,name=org.qemu.port.0
This invocation will get us a char device in the guest at:
/dev/virtio-ports/org.qemu.port.0
which can be a symlink to
/dev/vport0p3
This 'name' property is exposed by the guest kernel in a sysfs
attribute:
/sys/kernel/virtio-ports/vport0p3/name
A simple udev script can pick up this name and create the symlink
mentioned above.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:53 +0000 (00:36 +0530)]
virtio-serial-bus: Maintain guest and host port open/close state
Via control channel messages, the guest can tell us whether a port got
opened or closed. Similarly, we can also indicate to the guest of host
port open/close events.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:52 +0000 (00:36 +0530)]
virtio-console: qdev conversion, new virtio-serial-bus
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Tue, 19 Jan 2010 19:06:51 +0000 (00:36 +0530)]
virtio: Remove duplicate macro definition for max. virtqueues, bump up the max
VIRTIO_PCI_QUEUE_MAX is redefined in hw/virtio.c. Let's just keep it in
hw/virtio.h.
Also, bump up the value of the maximum allowed virtqueues to 64. This is
in preparation to allow multiple ports per virtio-console device.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:15 +0000 (16:48 +0200)]
Disable fall-back to read-only when cannot open drive's file for read-write
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:14 +0000 (16:48 +0200)]
Added drives' readonly option
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:13 +0000 (16:48 +0200)]
Clean-up a little bit the RW related bits of BDRV_O_FLAGS. BDRV_O_RDONLY gone (and so is BDRV_O_ACCESS). Default value for bdrv_flags (0/zero) is READ-ONLY. Need to explicitly request READ-WRITE.
Instead of using the field 'readonly' of the BlockDriverState struct for passing the request,
pass the request in the flags parameter to the function.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Naphtali Sprei [Sun, 17 Jan 2010 14:48:12 +0000 (16:48 +0200)]
Make CDROM a read-only drive
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Sat, 16 Jan 2010 17:19:44 +0000 (18:19 +0100)]
Documentation: Add missing documentation for qdev related command line options
The command line options -device, -nodefaults, -readconfig,
-writeconfig had entries for command line help, but
documentation for texi and derived formats (man, html, info)
was missing.
This also required moving "@end table" to the end of
qemu-options.hx again.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:14 +0000 (14:44 +0100)]
pc: add driver version compat properties
This patch adds compat property entries for ide-disk.ver and
scsi-disk.ver to pc-0.10 and pc-0.11. With this patch applied
the scsi and ide disks report "0.10" and "0.11" as version when
you start qemu with "-M pc-0.10" or "-M pc-0.11".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:13 +0000 (14:44 +0100)]
scsi: device version property
This patch adds a new property named 'ver' to scsi-disk which allows to
specify the version which the virtual disk/cdrom should report to the
guest. By default this is the qemu version (i.e. 0.12). usage:
-drive if=none,id=disk,file=...
-device lsi
-device scsi-disk,drive=disk,bus=scsi.0,unit=0,ver=42
You can also switch the version for all scsi drives using:
-global scsi-disk.ver=42
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gerd Hoffmann [Thu, 14 Jan 2010 13:44:12 +0000 (14:44 +0100)]
ide: device version property
This patch adds a new property named 'ver' to ide-drive which allows to
specify the version which the virtual disk/cdrom should report to the
guest. By default this is the qemu version (i.e. 0.12). usage:
-drive if=none,id=disk,file=...
-device ide-drive,bus=ide.0,unit=0,drive=disk,ver=42
You can also switch the version for all ide drives using:
-global ide-drive.ver=42
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Adam Litke [Fri, 15 Jan 2010 14:34:02 +0000 (08:34 -0600)]
QMP: Emit asynchronous events on all QMP monitors
When using a control/QMP monitor in tandem with a regular monitor, asynchronous
messages can get lost depending on the order of the QEMU program arguments.
QEMU events issued by monitor_protocol_event() always go to cur_mon. If the
user monitor was specified on the command line first (or it has ,default), the
message will be directed to the user monitor (not the QMP monitor).
Additionally, only one QMP session is currently able to receive async messages.
To avoid this confusion, scan through the list of monitors and emit the message
on each QMP monitor.
Signed-off-by: Adam Litke <agl@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Fri, 15 Jan 2010 11:56:41 +0000 (12:56 +0100)]
Fix QEMU_WARN_UNUSED_RESULT
Since commit
747bbdf7 QEMU_WARN_UNUSED_RESULT is never defined as it is
conditional on a define from config-host.h which is included only later.
Include that file earlier to get the warnings back.
Reactivating it unfortunately leads to some warnings about unused qdev_init
results. These calls are changed to qdev_init_nofail to avoid build failures.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:59 +0000 (14:50 -0200)]
QMP: Introduce VNC_INITIALIZED event
It's emitted when a VNC client session is activated by QEMU,
client's information such as port, IP and auth ID (if the
session is authenticated) are provided.
Event example:
{ "event": "VNC_INITIALIZED",
"timestamp": {"seconds":
1263475302, "microseconds": 150772},
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0"},
"client": { "family": "ipv4", "service": "46089",
"host": "127.0.0.1", "sasl_username": "lcapitulino" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:58 +0000 (14:50 -0200)]
QMP: Introduce VNC_DISCONNECTED event
It's emitted when a VNC client disconnects from QEMU, client's
information such as port and IP address are provided.
Event example:
{ "event": "VNC_DISCONNECTED",
"timestamp": { "seconds":
1262976601, "microseconds": 975795 },
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1", "sasl_username": "foo" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:57 +0000 (14:50 -0200)]
QMP: Introduce VNC_CONNECTED event
It's emitted when a VNC client connects to QEMU, client's information
such as port and IP address are provided.
Note that this event is emitted right when the connection is
established. This means that it happens before authentication
procedure and session initialization.
Event example:
{ "event": "VNC_CONNECTED",
"timestamp": { "seconds":
1262976601, "microseconds": 975795 },
"data": {
"server": { "auth": "sasl", "family": "ipv4",
"service": "5901", "host": "0.0.0.0" },
"client": { "family": "ipv4", "service": "58425",
"host": "127.0.0.1" } } }
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:56 +0000 (14:50 -0200)]
VNC: Cache client info at connection time
When a disconnection happens the client's socket on QEMU
side may become invalid, this way it won't be possible
to query it to get client information, which is going to
be needed by the future QMP VNC_DISCONNECTED event.
To always have this information available we query the
socket at connection time and cache the client info in
struct VncState.
Two function are introduced to perform this job.
vnc_client_cache_addr() is called right when the connection
is made, however the authentication information is not
available at that moment so vnc_client_cache_auth() is
called from protocol_client_init() to get auth info.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:55 +0000 (14:50 -0200)]
VNC: Add 'family' key
It contains the socket adress family name, like "ipv4" or
"ipv6".
This is useful for clients so that they can interpret the
'host' key reliably.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:54 +0000 (14:50 -0200)]
VNC: Rename client's 'username' key
It's the SASL username, so it's better to call it 'sasl_username'
to be consistent.
Note that this change wouldn't be allowed if QMP were stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:53 +0000 (14:50 -0200)]
VNC: Make 'auth' key mandatory
There is no reason to have it as optional and the code
in the server and client gets slightly simpler if the
key is mandatory.
While there also do some cleanup on how the server info is
collected.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Luiz Capitulino [Thu, 14 Jan 2010 16:50:52 +0000 (14:50 -0200)]
VNC: Use 'enabled' key instead of 'status'
Currently the 'status' key is a string whose value can be
"disabled" or "enabled", change it to the QMP's standard
'enabled' key, which is a bool.
Note that 'status' in being dropped and this wouldn't be
allowed if QMP were stable.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kusanagi Kouichi [Thu, 14 Jan 2010 15:46:24 +0000 (00:46 +0900)]
char: Remove redundant qemu_chr_generic_open() call.
qemu_chr_open_fd() calls qemu_chr_generic_open(),
so qemu_chr_open_tty() doesn't need to call it.
Signed-off-by: Kusanagi Kouichi <slash@ac.auone-net.jp>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cole Robinson [Thu, 14 Jan 2010 16:19:41 +0000 (11:19 -0500)]
raw-posix: Detect legacy floppy via ioctl on linux
Current legacy floppy detection is hardcoded based on source file
name. Make this smarter on linux by attempting a floppy specific
ioctl.
v2:
Give ioctl check higher priority than filename check
s/IDE/legacy/
v3:
Actually initialize 'prio' variable
Check for ioctl success rather than absence of specific failure
v4:
Explicitly mention that change is linux specific.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Cole Robinson [Thu, 14 Jan 2010 16:19:40 +0000 (11:19 -0500)]
raw-posix: Detect CDROM via ioctl on linux
Current CDROM detection is hardcoded based on source file name.
Make this smarter on linux by attempting a CDROM specific ioctl.
This makes '-cdrom /dev/sr0' succeed with no media present.
v2:
Give ioctl check higher priority than filename check.
v3:
Actually initialize 'prio' variable.
Check for ioctl success rather than absence of specific failure.
v4:
Explicitly mention that change is linux specific.
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 08:41:01 +0000 (09:41 +0100)]
avoid unreachable statement after break
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 08:42:10 +0000 (09:42 +0100)]
remove assertions
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 08:42:09 +0000 (09:42 +0100)]
change while to if
The while loop will be executed exactly 0 or 1 times, depending on
env->exit_request.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 08:42:08 +0000 (09:42 +0100)]
add assertions about env->current_tb
By virtue of the previous patch env->current_tb will always be NULL at
the top of cpu_exec's outermost for loop, and at the end of the innermost
while loop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 08:42:07 +0000 (09:42 +0100)]
clean up env->current_tb
There are three paths from the innermost while loop of cpu_exec
to the top of the outermost for loop. Two do not reset
env->current_tb. Fix this.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 07:56:36 +0000 (08:56 +0100)]
fix wrong indentation
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 07:56:35 +0000 (08:56 +0100)]
kill regs_to_env and env_to_regs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Fri, 15 Jan 2010 07:56:34 +0000 (08:56 +0100)]
remove dead code from target-i386/exec.h
These are unused since edea5f0 (no need to define global registers in
cpu-exec.c, 2008-05-10).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Igor V. Kovalenko [Wed, 13 Jan 2010 22:53:25 +0000 (01:53 +0300)]
rtl8139: fix clang reporting unused assignment of VLAN tagging data
Currently we do not implement VLAN tagging for rtl8139(C+),
still data is read from ring buffer headers.
- augment unused assignment with TODO item
- cast txdw1 to void for now
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Stefan Weil [Sun, 20 Dec 2009 15:52:24 +0000 (16:52 +0100)]
eepro100: Fix multicast support
* Handling of multicast list was missing.
* Multicast all was missing.
* Promiscuous mode for multicast frames was wrong.
This patch is a step to synchronize my maintainer version
of eepro100.c (git://repo.or.cz/qemu/ar7.git) with the
version integrated in QEMU.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Stefan Weil [Sun, 20 Dec 2009 15:52:22 +0000 (16:52 +0100)]
eepro100: Restructure code (new function tx_command)
Handling of transmit commands is rather complex,
so about 80 lines of code were moved from function
action_command to the new function tx_command.
The two new values "tx" and "cb_address" in the
eepro100 status structure made this possible without
passing too many parameters.
In addition, the moved code was cleaned a little bit:
old comments marked with //~ were removed, C++ style
comments were replaced by C style comments, C++ like
variable declarations after code were reordered.
Simplified mode is still broken. Nor did I fix
endianess issues. Both problems will be fixed in
additional patches (which need this one).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Blue Swirl [Sun, 17 Jan 2010 20:36:13 +0000 (20:36 +0000)]
Sparc32: Update OpenBIOS image to r666
Fixes the boot problem introduced by r665 image in
694b9309462f07307d16f492961f01271f10c245.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sun, 17 Jan 2010 16:51:57 +0000 (16:51 +0000)]
Sparc: improve CPU register dump
Common:
* Remove unnecessary 0x prefix
* Print %y
* Fix NZVC flag print order to match CPU bit order
Sparc64 specific:
* Print registers without line wrapping
* Print %f40-%f63
* Pretty print CCR flags
* Print %fsr and %fprs in full precision
* More consistent formatting
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Mike Frysinger [Sun, 17 Jan 2010 06:15:05 +0000 (01:15 -0500)]
fix linux-user microblaze ELF_ARCH definition
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
malc [Sat, 16 Jan 2010 23:03:30 +0000 (02:03 +0300)]
audio: include more information into audio_bug's output
Signed-off-by: malc <av1474@comtv.ru>
malc [Sat, 16 Jan 2010 21:25:29 +0000 (00:25 +0300)]
Revert "sdlaudio: make it suck less"
This reverts commit
4839abe78fd466a3cf06faa7c362154afd5404f1.
The commit was badly broken, Gentoo has sdl as the default driver,
consequently 5 gentoo users have hit the breakage and were kind enough
to report, so thank you:
Claes Gyllenswrd
vekin
Chris
But above all thanks to Toralf Foerster who actually provied enough
information to pinpoint the breakage to sdlaudio.
http://bugs.gentoo.org/show_bug.cgi?id=294269
Blue Swirl [Sat, 16 Jan 2010 09:06:35 +0000 (09:06 +0000)]
Sparc32: improve DMA controller IRQ debugging
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 16 Jan 2010 09:06:34 +0000 (09:06 +0000)]
ESP: improve IRQ debugging
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Sat, 16 Jan 2010 09:06:32 +0000 (09:06 +0000)]
sparc32 do not clear interrupts when masking
Don't clear interrupts on disabling, because
* Sun4M_SystemArchitecture_edited2.pdf doesn't describe
that masking or un-masking IRQ shall clear pending ones.
* Field tests also show that SPARCstation-20 doesn't
clear them.
* The patch makes Solaris 2.5.1/2.6 boot ~1500 times
faster (~20 seconds instead of ~8 hours)
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Sat, 16 Jan 2010 09:05:21 +0000 (09:05 +0000)]
Update Sparc OpenBIOS images to r665
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Artyom Tarasenko [Fri, 15 Jan 2010 21:28:56 +0000 (22:28 +0100)]
sparc32 do_unassigned_access overhaul v2
According to pages 9-31 - 9-34 of "SuperSPARC & MultiCache Controller
User's Manual":
1. "A lower priority fault may not overwrite the
MFSR status of a higher priority fault."
2. The MFAR is overwritten according to the policy defined for the MFSR
3. The overwrite bit is asserted if the fault status register (MFSR)
has been written more than once by faults of the same class
4. SuperSPARC will never place instruction fault addresses in the MFAR.
Implementation of points 1-3 allows booting Solaris 2.6 and 2.5.1.
v2: CODING_STYLE fixes
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Richard Henderson [Thu, 14 Jan 2010 22:59:51 +0000 (14:59 -0800)]
tcg/x86_64: Avoid unnecessary REX.B prefixes.
The existing P_REXB internal opcode flag unconditionally emits
the REX prefix. Technically it's not needed if the register in
question is %al, %bl, %cl, %dl.
Eliding the prefix requires splitting the P_REXB flag into two,
in order to indicate whether the byte register in question is
in the REG or the R/M field. Within TCG, the byte register is
in the REG field only for stores.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Edgar E. Iglesias [Tue, 12 Jan 2010 13:48:19 +0000 (14:48 +0100)]
nand: Correct random data reads.
Random reading depends on having the last row/page latched and not beeing
clobbered between read and any following random reads.
Also, s->iolen must be updated when loading the io/data register with
randomly accessed flash data.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Stefan Weil [Thu, 14 Jan 2010 17:11:43 +0000 (18:11 +0100)]
Makefile: Fix message for missing configure
When make is called without a valid configuration,
it should tell the user what to do.
Revision
0e8c9214ba1d4128cf92442cd343bc3733478261
was a regression which resulted in a message
which was no longer user friendly
(reported by Aurelien Jarno).
This patch restores the old behaviour.
Cc: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Andreas Färber <afaerber@opensolaris.org>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Kazu Hirata [Thu, 14 Jan 2010 17:08:00 +0000 (09:08 -0800)]
target-m68k: fix a typo in 'P' packet processing
Attached is a patch to fix a typo in 'P' packet processing for M68K.
Without this patch, QEMU fails to honor GDB's P packets from GDB
(writing to registers) for the address registers (A0 - A7).
The problem is because of an obvious typo. Notice that the second
"if" condition is meant to be n < 16 in:
if (n < 8) {
:
} else if (n < 8) {
Signed-off-by: Kazu Hirata <kazu@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Richard Henderson [Wed, 6 Jan 2010 00:03:00 +0000 (16:03 -0800)]
tcg/x86_64: Special-case all 32-bit AND operands.
This avoids an unnecessary REX.W prefix when dealing with AND
operands that fit into a 32-bit quantity. The most common change
actually seen is movz[wb]q -> movz[wb]l.
Similarly, avoid REXW in ext{8,16}u_i64 tcg opcodes.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Shin-ichiro KAWASAKI [Fri, 1 Jan 2010 06:59:39 +0000 (15:59 +0900)]
sh: sm501: Add hardware cursor feature
This patch adds hardware cursor feature to SM501 graphics chip emulation,
to make the graphic console more useful for QEMU SH4 users.
Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Vince Weaver [Tue, 29 Dec 2009 05:01:22 +0000 (00:01 -0500)]
alpha: fix stat64 issue
The stat64/fstat64 syscalls are broken for alpha linux-user.
This is because Alpha, even though it is native 64-bits, has a stat64
syscall that is different than regular stat. This means that the
"TARGET_LONG_BITS==64" check in syscall.c isn't enough. Below is
a patch that fixes things for me, although it might not be the cleanest
fix.
This issue keeps sixtrack and fma3d spec2k benchmarks from running.
Signed-off-by: Vince Weaver <vince@csl.cornell.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Edgar E. Iglesias [Mon, 11 Jan 2010 14:32:47 +0000 (15:32 +0100)]
ppc-40x: Correct ESR for zone protection faults.
Raise the zone protection fault in ESR for TLB faults caused by
zone protection bits.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Jan 2010 14:23:58 +0000 (15:23 +0100)]
ppc-40x: Correct decoding of zone protection bits.
The 40x MMU has 15 zones in the ZPR register.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Jan 2010 13:41:53 +0000 (14:41 +0100)]
ppc-40x: Correct check for Endian swapping TLB entries.
Bailout on 40x TLB entries with endianess swapping only if the entry
is valid.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Edgar E. Iglesias [Mon, 11 Jan 2010 13:21:58 +0000 (14:21 +0100)]
ppc-40x: Get TLB attributes from TLBLO.
The ZSEL was incorrectly beeing decoded from TLBHI. Decode it from
TLBLO instead.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Markus Armbruster [Thu, 17 Dec 2009 16:19:17 +0000 (17:19 +0100)]
docs: New qdev-device-use.txt
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Milan Plzik [Thu, 7 Jan 2010 12:39:43 +0000 (13:39 +0100)]
Qemu's internal TFTP server breaks lock-step-iness of TFTP
According to RFC 1350 and RFC 2347, TFTP server should answer RRQ by
either OACK or DATA packet. Qemu's internal TFTP server answers RRQ with
additional options by sending both OACK and DATA packet, thus breaking
the "lock-step" feature of the protocol, and also confuses client.
Proposed solution would be to, in case of OACK packet, wait for ACK
from client and just then start sending data. Attached patch implements
this.
Signed-off-by: Thomas Horsten <thomas@horsten.com>
Signed-off-by: Milan Plzik <milan.plzik@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Gleb Natapov [Wed, 13 Jan 2010 13:25:06 +0000 (15:25 +0200)]
Add KVM paravirt cpuid leaf
Initialize KVM paravirt cpuid leaf and allow user to control guest
visible PV features through -cpu flag.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Wed, 13 Jan 2010 12:30:32 +0000 (13:30 +0100)]
virtio-blk: remove dead variable in virtio_blk_handle_scsi
As pointed out by clang size is only ever written to, but never actually
used.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Tue, 12 Jan 2010 12:49:43 +0000 (13:49 +0100)]
qcow/qcow2: implement bdrv_aio_flush
Now that we do not have to flush the backing device anymore implementing
the bdrv_aio_flush method for image formats is trivial.
[hch: forward ported to qemu mainline from a product tree]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Christoph Hellwig [Tue, 12 Jan 2010 12:49:23 +0000 (13:49 +0100)]
block: flush backing_hd in the right place
The backing device is only modified from bdrv_commit. So instead of
flushing it every time bdrv_flush is called for the front-end device
only flush it after we're written data to it in bdrv_commit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:47 +0000 (16:24 +0530)]
json-parser: remove dead increment
clang-analyzer points out a redundant increment.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:46 +0000 (16:24 +0530)]
qcow2-refcount: remove dead assignment
clang-analyzer points out a redundant assignment.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:45 +0000 (16:24 +0530)]
hw/vga.c: remove dead assignment
clang-analyzer points out a redundant assignment.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:44 +0000 (16:24 +0530)]
x86: translate.c: remove dead assignment
clang-analyzer points out a redundant assignment.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:43 +0000 (16:24 +0530)]
virtio: net: remove dead assignment
clang-analyzer points out value assigned to 'len' is not used.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Amit Shah [Wed, 13 Jan 2010 10:54:42 +0000 (16:24 +0530)]
vl.c: Remove dead assignment
clang-analyzer pointed out the value of 'sockets' is never reused.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
CC: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Wed, 13 Jan 2010 15:20:56 +0000 (16:20 +0100)]
osdep.c: Fix accept4 fallback
Commit
3a03bfa5 added a fallback in case the Linux kernel running qemu is older
than the kernel of the build system. Unfortunately, v1 was committed instead of
v2, so the code has a bug that was revealed in the review (checking for the
wrong error code).
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Tue, 12 Jan 2010 11:55:18 +0000 (12:55 +0100)]
qemu-img rebase
This adds a rebase subcommand to qemu-img which allows to change the backing
file of an image.
In default mode, both the current and the new backing file need to exist, and
after the rebase, the COW image is guaranteed to have the same guest visible
content as before. To achieve this, old and new backing file are compared and,
if necessary, data is copied from the old backing file into the COW image.
With -u an unsafe mode is enabled that doesn't require the backing files to
exist. It merely changes the backing file reference in the COW image. This is
useful for renaming or moving the backing file. The user is responsible to make
sure that the new backing file has no changes compared to the old one, or
corruption may occur.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Tue, 12 Jan 2010 11:55:17 +0000 (12:55 +0100)]
block: Add bdrv_change_backing_file
Introduce the functions needed to change the backing file of an image. The
function is implemented for qcow2.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Kevin Wolf [Tue, 12 Jan 2010 11:55:16 +0000 (12:55 +0100)]
block: Introduce BDRV_O_NO_BACKING
If an image references a backing file that doesn't exist, qemu-img info fails
to open this image. Exactly in this case the info would be valuable, though:
the user might want to find out which file is missing.
This patch introduces a BDRV_O_NO_BACKING flag to ignore the backing file when
opening the image. qemu-img info is the first user and provides info now even
if the backing file is invalid.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 13 Jan 2010 13:05:34 +0000 (14:05 +0100)]
move kbd/mouse handling to input.c
Move 200 lines out of vl.c already into common code that only needs to
be compiled once.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 13 Jan 2010 08:52:56 +0000 (09:52 +0100)]
use pkg-config for libcurl whenever available
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 13 Jan 2010 08:52:55 +0000 (09:52 +0100)]
use pkg-config for sdl whenever available
Together with the first patch this enables using the prefixed
pkg-config, thus picking up the correct flags for SDL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 13 Jan 2010 08:52:54 +0000 (09:52 +0100)]
fixes to the static compilation case for sdl
After the next commit, pkg-config could be used for the shared library
configuration case and sdl-config for static libraries. So I prepare
the test here by doing two changes:
at the same time I remove useless backslashes from the invocation of
grep;
1) fixing a typo ($sd_cflags). The typo has been there since commit
1ac88f2 (remove sdl_static. Just do the right thing if static is yes,
2009-07-27).
2) fixing an erroneous "test `... | grep > /dev/null`" idiom that would
never succeed since grep's output would be empty;
3) checking the status code after executing sdl-config --static --libs;
this is needed for the next patch only.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Paolo Bonzini [Wed, 13 Jan 2010 08:52:53 +0000 (09:52 +0100)]
use cross-prefix for pkgconfig
Since pkgconfig can give different output for different targets,
it should be tried with the cross-compilation prefix first.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Blue Swirl [Wed, 13 Jan 2010 18:59:54 +0000 (18:59 +0000)]
pcnet: remove dead nested assignment, spotted by clang
Although the value stored to 'addr' is used in the enclosing expression,
the value is never actually read from 'addr'.
Probably a typo.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Blue Swirl [Wed, 13 Jan 2010 18:58:51 +0000 (18:58 +0000)]
Sparc32: remove dead increment, spotted by clang
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>