Christophe Leroy [Tue, 8 Jan 2019 06:56:48 +0000 (06:56 +0000)]
crypto: talitos - fix ablkcipher for CONFIG_VMAP_STACK
commit
1bea445b0a022ee126ca328b3705cd4df18ebc14 upstream.
[ 2.364486] WARNING: CPU: 0 PID: 60 at ./arch/powerpc/include/asm/io.h:837 dma_nommu_map_page+0x44/0xd4
[ 2.373579] CPU: 0 PID: 60 Comm: cryptomgr_test Tainted: G W 4.20.0-rc5-00560-g6bfb52e23a00-dirty #531
[ 2.384740] NIP:
c000c540 LR:
c000c584 CTR:
00000000
[ 2.389743] REGS:
c95abab0 TRAP: 0700 Tainted: G W (4.20.0-rc5-00560-g6bfb52e23a00-dirty)
[ 2.400042] MSR:
00029032 <EE,ME,IR,DR,RI> CR:
24042204 XER:
00000000
[ 2.406669]
[ 2.406669] GPR00:
c02f2244 c95abb60 c6262990 c95abd80 0000256a 00000001 00000001 00000001
[ 2.406669] GPR08:
00000000 00002000 00000010 00000010 24042202 00000000 00000100 c95abd88
[ 2.406669] GPR16:
00000000 c05569d4 00000001 00000010 c95abc88 c0615664 00000004 00000000
[ 2.406669] GPR24:
00000010 c95abc88 c95abc88 00000000 c61ae210 c7ff6d40 c61ae210 00003d68
[ 2.441559] NIP [
c000c540] dma_nommu_map_page+0x44/0xd4
[ 2.446720] LR [
c000c584] dma_nommu_map_page+0x88/0xd4
[ 2.451762] Call Trace:
[ 2.454195] [
c95abb60] [
82000808] 0x82000808 (unreliable)
[ 2.459572] [
c95abb80] [
c02f2244] talitos_edesc_alloc+0xbc/0x3c8
[ 2.465493] [
c95abbb0] [
c02f2600] ablkcipher_edesc_alloc+0x4c/0x5c
[ 2.471606] [
c95abbd0] [
c02f4ed0] ablkcipher_encrypt+0x20/0x64
[ 2.477389] [
c95abbe0] [
c02023b0] __test_skcipher+0x4bc/0xa08
[ 2.483049] [
c95abe00] [
c0204b60] test_skcipher+0x2c/0xcc
[ 2.488385] [
c95abe20] [
c0204c48] alg_test_skcipher+0x48/0xbc
[ 2.494064] [
c95abe40] [
c0205cec] alg_test+0x164/0x2e8
[ 2.499142] [
c95abf00] [
c0200dec] cryptomgr_test+0x48/0x50
[ 2.504558] [
c95abf10] [
c0039ff4] kthread+0xe4/0x110
[ 2.509471] [
c95abf40] [
c000e1d0] ret_from_kernel_thread+0x14/0x1c
[ 2.515532] Instruction dump:
[ 2.518468]
7c7e1b78 7c9d2378 7cbf2b78 41820054 3d20c076 8089c200 3d20c076 7c84e850
[ 2.526127]
8129c204 7c842e70 7f844840 419c0008 <
0fe00000>
2f9e0000 54847022 7c84fa14
[ 2.533960] ---[ end trace
bf78d94af73fe3b8 ]---
[ 2.539123] talitos
ff020000.crypto: master data transfer error
[ 2.544775] talitos
ff020000.crypto: TEA error: ISR 0x20000000_00000040
[ 2.551625] alg: skcipher: encryption failed on test 1 for ecb-aes-talitos: ret=22
IV cannot be on stack when CONFIG_VMAP_STACK is selected because the stack
cannot be DMA mapped anymore.
This patch copies the IV into the extended descriptor.
Fixes:
4de9d0b547b9 ("crypto: talitos - Add ablkcipher algorithms")
Cc: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Tue, 8 Jan 2019 06:56:46 +0000 (06:56 +0000)]
crypto: talitos - reorder code in talitos_edesc_alloc()
commit
c56c2e173773097a248fd3bace91ac8f6fc5386d upstream.
This patch moves the mapping of IV after the kmalloc(). This
avoids having to unmap in case kmalloc() fails.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 17 Dec 2018 07:23:22 +0000 (23:23 -0800)]
crypto: authenc - fix parsing key with misaligned rta_len
commit
8f9c469348487844328e162db57112f7d347c49f upstream.
Keys for "authenc" AEADs are formatted as an rtattr containing a 4-byte
'enckeylen', followed by an authentication key and an encryption key.
crypto_authenc_extractkeys() parses the key to find the inner keys.
However, it fails to consider the case where the rtattr's payload is
longer than 4 bytes but not 4-byte aligned, and where the key ends
before the next 4-byte aligned boundary. In this case, 'keylen -=
RTA_ALIGN(rta->rta_len);' underflows to a value near UINT_MAX. This
causes a buffer overread and crash during crypto_ahash_setkey().
Fix it by restricting the rtattr payload to the expected size.
Reproducer using AF_ALG:
#include <linux/if_alg.h>
#include <linux/rtnetlink.h>
#include <sys/socket.h>
int main()
{
int fd;
struct sockaddr_alg addr = {
.salg_type = "aead",
.salg_name = "authenc(hmac(sha256),cbc(aes))",
};
struct {
struct rtattr attr;
__be32 enckeylen;
char keys[1];
} __attribute__((packed)) key = {
.attr.rta_len = sizeof(key),
.attr.rta_type = 1 /* CRYPTO_AUTHENC_KEYA_PARAM */,
};
fd = socket(AF_ALG, SOCK_SEQPACKET, 0);
bind(fd, (void *)&addr, sizeof(addr));
setsockopt(fd, SOL_ALG, ALG_SET_KEY, &key, sizeof(key));
}
It caused:
BUG: unable to handle kernel paging request at
ffff88007ffdc000
PGD 2e01067 P4D 2e01067 PUD 2e04067 PMD 2e05067 PTE 0
Oops: 0000 [#1] SMP
CPU: 0 PID: 883 Comm: authenc Not tainted 4.20.0-rc1-00108-g00c9fe37a7f27 #13
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-20181126_142135-anatol 04/01/2014
RIP: 0010:sha256_ni_transform+0xb3/0x330 arch/x86/crypto/sha256_ni_asm.S:155
[...]
Call Trace:
sha256_ni_finup+0x10/0x20 arch/x86/crypto/sha256_ssse3_glue.c:321
crypto_shash_finup+0x1a/0x30 crypto/shash.c:178
shash_digest_unaligned+0x45/0x60 crypto/shash.c:186
crypto_shash_digest+0x24/0x40 crypto/shash.c:202
hmac_setkey+0x135/0x1e0 crypto/hmac.c:66
crypto_shash_setkey+0x2b/0xb0 crypto/shash.c:66
shash_async_setkey+0x10/0x20 crypto/shash.c:223
crypto_ahash_setkey+0x2d/0xa0 crypto/ahash.c:202
crypto_authenc_setkey+0x68/0x100 crypto/authenc.c:96
crypto_aead_setkey+0x2a/0xc0 crypto/aead.c:62
aead_setkey+0xc/0x10 crypto/algif_aead.c:526
alg_setkey crypto/af_alg.c:223 [inline]
alg_setsockopt+0xfe/0x130 crypto/af_alg.c:256
__sys_setsockopt+0x6d/0xd0 net/socket.c:1902
__do_sys_setsockopt net/socket.c:1913 [inline]
__se_sys_setsockopt net/socket.c:1910 [inline]
__x64_sys_setsockopt+0x1f/0x30 net/socket.c:1910
do_syscall_64+0x4a/0x180 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
e236d4a89a2f ("[CRYPTO] authenc: Move enckeylen into key itself")
Cc: <stable@vger.kernel.org> # v2.6.25+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 17 Dec 2018 07:23:23 +0000 (23:23 -0800)]
crypto: bcm - convert to use crypto_authenc_extractkeys()
commit
ab57b33525c3221afaebd391458fa0cbcd56903d upstream.
Convert the bcm crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
This also fixes the DES weak key check to actually be done on the right
key. (It was checking the authentication key, not the encryption key...)
Fixes:
9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Mon, 17 Dec 2018 07:23:24 +0000 (23:23 -0800)]
crypto: ccree - convert to use crypto_authenc_extractkeys()
commit
dc95b5350a8f07d73d6bde3a79ef87289698451d upstream.
Convert the ccree crypto driver to use crypto_authenc_extractkeys() so
that it picks up the fix for broken validation of rtattr::rta_len.
Fixes:
ff27e85a85bb ("crypto: ccree - add AEAD support")
Cc: <stable@vger.kernel.org> # v4.17+
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Harsh Jain [Thu, 3 Jan 2019 08:51:05 +0000 (14:21 +0530)]
crypto: authencesn - Avoid twice completion call in decrypt path
commit
a7773363624b034ab198c738661253d20a8055c2 upstream.
Authencesn template in decrypt path unconditionally calls aead_request_complete
after ahash_verify which leads to following kernel panic in after decryption.
[ 338.539800] BUG: unable to handle kernel NULL pointer dereference at
0000000000000004
[ 338.548372] PGD 0 P4D 0
[ 338.551157] Oops: 0000 [#1] SMP PTI
[ 338.554919] CPU: 0 PID: 0 Comm: swapper/0 Kdump: loaded Tainted: G W I 4.19.7+ #13
[ 338.564431] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10
[ 338.572212] RIP: 0010:esp_input_done2+0x350/0x410 [esp4]
[ 338.578030] Code: ff 0f b6 68 10 48 8b 83 c8 00 00 00 e9 8e fe ff ff 8b 04 25 04 00 00 00 83 e8 01 48 98 48 8b 3c c5 10 00 00 00 e9 f7 fd ff ff <8b> 04 25 04 00 00 00 83 e8 01 48 98 4c 8b 24 c5 10 00 00 00 e9 3b
[ 338.598547] RSP: 0018:
ffff911c97803c00 EFLAGS:
00010246
[ 338.604268] RAX:
0000000000000002 RBX:
ffff911c4469ee00 RCX:
0000000000000000
[ 338.612090] RDX:
0000000000000000 RSI:
0000000000000130 RDI:
ffff911b87c20400
[ 338.619874] RBP:
0000000000000000 R08:
ffff911b87c20498 R09:
000000000000000a
[ 338.627610] R10:
0000000000000001 R11:
0000000000000004 R12:
0000000000000000
[ 338.635402] R13:
ffff911c89590000 R14:
ffff911c91730000 R15:
0000000000000000
[ 338.643234] FS:
0000000000000000(0000) GS:
ffff911c97800000(0000) knlGS:
0000000000000000
[ 338.652047] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 338.658299] CR2:
0000000000000004 CR3:
00000001ec20a000 CR4:
00000000000006f0
[ 338.666382] Call Trace:
[ 338.669051] <IRQ>
[ 338.671254] esp_input_done+0x12/0x20 [esp4]
[ 338.675922] chcr_handle_resp+0x3b5/0x790 [chcr]
[ 338.680949] cpl_fw6_pld_handler+0x37/0x60 [chcr]
[ 338.686080] chcr_uld_rx_handler+0x22/0x50 [chcr]
[ 338.691233] uldrx_handler+0x8c/0xc0 [cxgb4]
[ 338.695923] process_responses+0x2f0/0x5d0 [cxgb4]
[ 338.701177] ? bitmap_find_next_zero_area_off+0x3a/0x90
[ 338.706882] ? matrix_alloc_area.constprop.7+0x60/0x90
[ 338.712517] ? apic_update_irq_cfg+0x82/0xf0
[ 338.717177] napi_rx_handler+0x14/0xe0 [cxgb4]
[ 338.722015] net_rx_action+0x2aa/0x3e0
[ 338.726136] __do_softirq+0xcb/0x280
[ 338.730054] irq_exit+0xde/0xf0
[ 338.733504] do_IRQ+0x54/0xd0
[ 338.736745] common_interrupt+0xf/0xf
Fixes:
104880a6b470 ("crypto: authencesn - Convert to new AEAD...")
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aymen Sghaier [Wed, 19 Dec 2018 14:36:44 +0000 (16:36 +0200)]
crypto: caam - fix zero-length buffer DMA mapping
commit
04e6d25c5bb244c1a37eb9fe0b604cc11a04e8c5 upstream.
Recent changes - probably DMA API related (generic and/or arm64-specific) -
exposed a case where driver maps a zero-length buffer:
ahash_init()->ahash_update()->ahash_final() with a zero-length string to
hash
kernel BUG at kernel/dma/swiotlb.c:475!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 2 PID: 1823 Comm: cryptomgr_test Not tainted 4.20.0-rc1-00108-g00c9fe37a7f2 #1
Hardware name: LS1046A RDB Board (DT)
pstate:
80000005 (Nzcv daif -PAN -UAO)
pc : swiotlb_tbl_map_single+0x170/0x2b8
lr : swiotlb_map_page+0x134/0x1f8
sp :
ffff00000f79b8f0
x29:
ffff00000f79b8f0 x28:
0000000000000000
x27:
ffff0000093d0000 x26:
0000000000000000
x25:
00000000001f3ffe x24:
0000000000200000
x23:
0000000000000000 x22:
00000009f2c538c0
x21:
ffff800970aeb410 x20:
0000000000000001
x19:
ffff800970aeb410 x18:
0000000000000007
x17:
000000000000000e x16:
0000000000000001
x15:
0000000000000019 x14:
c32cb8218a167fe8
x13:
ffffffff00000000 x12:
ffff80097fdae348
x11:
0000800976bca000 x10:
0000000000000010
x9 :
0000000000000000 x8 :
ffff0000091fd6c8
x7 :
0000000000000000 x6 :
00000009f2c538bf
x5 :
0000000000000000 x4 :
0000000000000001
x3 :
0000000000000000 x2 :
00000009f2c538c0
x1 :
00000000f9fff000 x0 :
0000000000000000
Process cryptomgr_test (pid: 1823, stack limit = 0x(____ptrval____))
Call trace:
swiotlb_tbl_map_single+0x170/0x2b8
swiotlb_map_page+0x134/0x1f8
ahash_final_no_ctx+0xc4/0x6cc
ahash_final+0x10/0x18
crypto_ahash_op+0x30/0x84
crypto_ahash_final+0x14/0x1c
__test_hash+0x574/0xe0c
test_hash+0x28/0x80
__alg_test_hash+0x84/0xd0
alg_test_hash+0x78/0x144
alg_test.part.30+0x12c/0x2b4
alg_test+0x3c/0x68
cryptomgr_test+0x44/0x4c
kthread+0xfc/0x128
ret_from_fork+0x10/0x18
Code:
d34bfc18 2a1a03f7 1a9f8694 35fff89a (
d4210000)
Cc: <stable@vger.kernel.org>
Signed-off-by: Aymen Sghaier <aymen.sghaier@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Biggers [Wed, 9 Jan 2019 06:12:41 +0000 (22:12 -0800)]
crypto: sm3 - fix undefined shift by >= width of value
commit
d45a90cb5d061fa7d411b974b950fe0b8bc5f265 upstream.
sm3_compress() calls rol32() with shift >= 32, which causes undefined
behavior. This is easily detected by enabling CONFIG_UBSAN.
Explicitly AND with 31 to make the behavior well defined.
Fixes:
4f0fc1600edb ("crypto: sm3 - add OSCCA SM3 secure hash")
Cc: <stable@vger.kernel.org> # v4.15+
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Mon, 7 Jan 2019 20:49:09 +0000 (21:49 +0100)]
r8169: load Realtek PHY driver module before r8169
[ Upstream commit
11287b693d03830010356339e4ceddf47dee34fa ]
This soft dependency works around an issue where sometimes the genphy
driver is used instead of the dedicated PHY driver. The root cause of
the issue isn't clear yet. People reported the unloading/re-loading
module r8169 helps, and also configuring this soft dependency in
the modprobe config files. Important just seems to be that the
realtek module is loaded before r8169.
Once this has been applied preliminary fix
38af4b903210 ("net: phy:
add workaround for issue where PHY driver doesn't bind to the device")
will be removed.
Fixes:
f1e911d5d0df ("r8169: add basic phylib support")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Mon, 7 Jan 2019 21:47:33 +0000 (16:47 -0500)]
ip: on queued skb use skb_header_pointer instead of pskb_may_pull
[ Upstream commit
4a06fa67c4da20148803525151845276cdb995c1 ]
Commit
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call
pskb_may_pull") avoided a read beyond the end of the skb linear
segment by calling pskb_may_pull.
That function can trigger a BUG_ON in pskb_expand_head if the skb is
shared, which it is when when peeking. It can also return ENOMEM.
Avoid both by switching to safer skb_header_pointer.
Fixes:
2efd4fca703a ("ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull")
Reported-by: syzbot <syzkaller@googlegroups.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Willem de Bruijn [Tue, 8 Jan 2019 17:32:42 +0000 (12:32 -0500)]
bonding: update nest level on unlink
[ Upstream commit
001e465f09a18857443489a57e74314a3368c805 ]
A network device stack with multiple layers of bonding devices can
trigger a false positive lockdep warning. Adding lockdep nest levels
fixes this. Update the level on both enslave and unlink, to avoid the
following series of events ..
ip netns add test
ip netns exec test bash
ip link set dev lo addr 00:11:22:33:44:55
ip link set dev lo down
ip link add dev bond1 type bond
ip link add dev bond2 type bond
ip link set dev lo master bond1
ip link set dev bond1 master bond2
ip link set dev bond1 nomaster
ip link set dev bond2 master bond1
.. from still generating a splat:
[ 193.652127] ======================================================
[ 193.658231] WARNING: possible circular locking dependency detected
[ 193.664350] 4.20.0 #8 Not tainted
[ 193.668310] ------------------------------------------------------
[ 193.674417] ip/15577 is trying to acquire lock:
[ 193.678897]
00000000a40e3b69 (&(&bond->stats_lock)->rlock#3/3){+.+.}, at: bond_get_stats+0x58/0x290
[ 193.687851]
but task is already holding lock:
[ 193.693625]
00000000807b9d9f (&(&bond->stats_lock)->rlock#2/2){+.+.}, at: bond_get_stats+0x58/0x290
[..]
[ 193.851092] lock_acquire+0xa7/0x190
[ 193.855138] _raw_spin_lock_nested+0x2d/0x40
[ 193.859878] bond_get_stats+0x58/0x290
[ 193.864093] dev_get_stats+0x5a/0xc0
[ 193.868140] bond_get_stats+0x105/0x290
[ 193.872444] dev_get_stats+0x5a/0xc0
[ 193.876493] rtnl_fill_stats+0x40/0x130
[ 193.880797] rtnl_fill_ifinfo+0x6c5/0xdc0
[ 193.885271] rtmsg_ifinfo_build_skb+0x86/0xe0
[ 193.890091] rtnetlink_event+0x5b/0xa0
[ 193.894320] raw_notifier_call_chain+0x43/0x60
[ 193.899225] netdev_change_features+0x50/0xa0
[ 193.904044] bond_compute_features.isra.46+0x1ab/0x270
[ 193.909640] bond_enslave+0x141d/0x15b0
[ 193.913946] do_set_master+0x89/0xa0
[ 193.918016] do_setlink+0x37c/0xda0
[ 193.921980] __rtnl_newlink+0x499/0x890
[ 193.926281] rtnl_newlink+0x48/0x70
[ 193.930238] rtnetlink_rcv_msg+0x171/0x4b0
[ 193.934801] netlink_rcv_skb+0xd1/0x110
[ 193.939103] rtnetlink_rcv+0x15/0x20
[ 193.943151] netlink_unicast+0x3b5/0x520
[ 193.947544] netlink_sendmsg+0x2fd/0x3f0
[ 193.951942] sock_sendmsg+0x38/0x50
[ 193.955899] ___sys_sendmsg+0x2ba/0x2d0
[ 193.960205] __x64_sys_sendmsg+0xad/0x100
[ 193.964687] do_syscall_64+0x5a/0x460
[ 193.968823] entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes:
7e2556e40026 ("bonding: avoid lockdep confusion in bond_get_stats()")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Heiner Kallweit [Sun, 6 Jan 2019 19:44:00 +0000 (20:44 +0100)]
r8169: don't try to read counters if chip is in a PCI power-save state
[ Upstream commit
10262b0b53666cbc506989b17a3ead1e9c3b43b4 ]
Avoid log spam caused by trying to read counters from the chip whilst
it is in a PCI power-save state.
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=107421
Fixes:
1ef7286e7f36 ("r8169: Dereference MMIO address immediately before use")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cong Wang [Sun, 6 Jan 2019 07:45:26 +0000 (23:45 -0800)]
smc: move unhash as early as possible in smc_release()
[ Upstream commit
26d92e951fe0a44ee4aec157cabb65a818cc8151 ]
In smc_release() we release smc->clcsock before unhash the smc
sock, but a parallel smc_diag_dump() may be still reading
smc->clcsock, therefore this could cause a use-after-free as
reported by syzbot.
Reported-and-tested-by: syzbot+fbd1e5476e4c94c7b34e@syzkaller.appspotmail.com
Fixes:
51f1de79ad8e ("net/smc: replace sock_put worker by socket refcounting")
Cc: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Reported-by: syzbot+0bf2e01269f1274b4b03@syzkaller.appspotmail.com
Reported-by: syzbot+e3132895630f957306bc@syzkaller.appspotmail.com
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bryan Whitehead [Mon, 7 Jan 2019 19:00:09 +0000 (14:00 -0500)]
lan743x: Remove phy_read from link status change function
[ Upstream commit
a0071840d2040ea1b27e5a008182b09b88defc15 ]
It has been noticed that some phys do not have the registers
required by the previous implementation.
To fix this, instead of using phy_read, the required information
is extracted from the phy_device structure.
fixes:
23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Bryan Whitehead <Bryan.Whitehead@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stanislav Fomichev [Mon, 7 Jan 2019 21:38:38 +0000 (13:38 -0800)]
tun: publish tfile after it's fully initialized
[ Upstream commit
0b7959b6257322f7693b08a459c505d4938646f2 ]
BUG: unable to handle kernel NULL pointer dereference at
00000000000000d1
Call Trace:
? napi_gro_frags+0xa7/0x2c0
tun_get_user+0xb50/0xf20
tun_chr_write_iter+0x53/0x70
new_sync_write+0xff/0x160
vfs_write+0x191/0x1e0
__x64_sys_write+0x5e/0xd0
do_syscall_64+0x47/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
I think there is a subtle race between sending a packet via tap and
attaching it:
CPU0: CPU1:
tun_chr_ioctl(TUNSETIFF)
tun_set_iff
tun_attach
rcu_assign_pointer(tfile->tun, tun);
tun_fops->write_iter()
tun_chr_write_iter
tun_napi_alloc_frags
napi_get_frags
napi->skb = napi_alloc_skb
tun_napi_init
netif_napi_add
napi->skb = NULL
napi->skb is NULL here
napi_gro_frags
napi_frags_skb
skb = napi->skb
skb_reset_mac_header(skb)
panic()
Move rcu_assign_pointer(tfile->tun) and rcu_assign_pointer(tun->tfiles) to
be the last thing we do in tun_attach(); this should guarantee that when we
call tun_get() we always get an initialized object.
v2 changes:
* remove extra napi_mutex locks/unlocks for napi operations
Reported-by: syzbot <syzkaller@googlegroups.com>
Fixes:
90e33d459407 ("tun: enable napi_gro_frags() for TUN/TAP driver")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yuchung Cheng [Wed, 9 Jan 2019 02:14:28 +0000 (18:14 -0800)]
tcp: change txhash on SYN-data timeout
[ Upstream commit
c5715b8fabfca0ef85903f8bad2189940ed41cc8 ]
Previously upon SYN timeouts the sender recomputes the txhash to
try a different path. However this does not apply on the initial
timeout of SYN-data (active Fast Open). Therefore an active IPv6
Fast Open connection may incur one second RTO penalty to take on
a new path after the second SYN retransmission uses a new flow label.
This patch removes this undesirable behavior so Fast Open changes
the flow label just like the regular connections. This also helps
avoid falsely disabling Fast Open on the sender which triggers
after two consecutive SYN timeouts on Fast Open.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jason Gunthorpe [Tue, 8 Jan 2019 23:27:06 +0000 (23:27 +0000)]
packet: Do not leak dev refcounts on error exit
[ Upstream commit
d972f3dce8d161e2142da0ab1ef25df00e2f21a9 ]
'dev' is non NULL when the addr_len check triggers so it must goto a label
that does the dev_put otherwise dev will have a leaked refcount.
This bug causes the ib_ipoib module to become unloadable when using
systemd-network as it triggers this check on InfiniBand links.
Fixes:
99137b7888f4 ("packet: validate address length")
Reported-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
JianJhen Chen [Sun, 6 Jan 2019 03:28:13 +0000 (11:28 +0800)]
net: bridge: fix a bug on using a neighbour cache entry without checking its state
[ Upstream commit
4c84edc11b76590859b1e45dd676074c59602dc4 ]
When handling DNAT'ed packets on a bridge device, the neighbour cache entry
from lookup was used without checking its state. It means that a cache entry
in the NUD_STALE state will be used directly instead of entering the NUD_DELAY
state to confirm the reachability of the neighbor.
This problem becomes worse after commit
2724680bceee ("neigh: Keep neighbour
cache entries if number of them is small enough."), since all neighbour cache
entries in the NUD_STALE state will be kept in the neighbour table as long as
the number of cache entries does not exceed the value specified in gc_thresh1.
This commit validates the state of a neighbour cache entry before using
the entry.
Signed-off-by: JianJhen Chen <kchen@synology.com>
Reviewed-by: JinLin Chen <jlchen@synology.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Eric Dumazet [Tue, 8 Jan 2019 12:06:14 +0000 (04:06 -0800)]
ipv6: fix kernel-infoleak in ipv6_local_error()
[ Upstream commit
7d033c9f6a7fd3821af75620a0257db87c2b552a ]
This patch makes sure the flow label in the IPv6 header
forged in ipv6_local_error() is initialized.
BUG: KMSAN: kernel-infoleak in _copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
CPU: 1 PID: 24675 Comm: syz-executor1 Not tainted 4.20.0-rc7+ #4
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
kmsan_internal_check_memory+0x455/0xb00 mm/kmsan/kmsan.c:675
kmsan_copy_to_user+0xab/0xc0 mm/kmsan/kmsan_hooks.c:601
_copy_to_user+0x16b/0x1f0 lib/usercopy.c:32
copy_to_user include/linux/uaccess.h:177 [inline]
move_addr_to_user+0x2e9/0x4f0 net/socket.c:227
___sys_recvmsg+0x5d7/0x1140 net/socket.c:2284
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f8750c06c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002f
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457ec9
RDX:
0000000000002000 RSI:
0000000020000400 RDI:
0000000000000005
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f8750c076d4
R13:
00000000004c4a60 R14:
00000000004d8140 R15:
00000000ffffffff
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:219 [inline]
kmsan_internal_chain_origin+0x134/0x230 mm/kmsan/kmsan.c:439
__msan_chain_origin+0x70/0xe0 mm/kmsan/kmsan_instr.c:200
ipv6_recv_error+0x1e3f/0x1eb0 net/ipv6/datagram.c:475
udpv6_recvmsg+0x398/0x2ab0 net/ipv6/udp.c:335
inet_recvmsg+0x4fb/0x600 net/ipv4/af_inet.c:830
sock_recvmsg_nosec net/socket.c:794 [inline]
sock_recvmsg+0x1d1/0x230 net/socket.c:801
___sys_recvmsg+0x4d5/0x1140 net/socket.c:2278
__sys_recvmsg net/socket.c:2327 [inline]
__do_sys_recvmsg net/socket.c:2337 [inline]
__se_sys_recvmsg+0x2fa/0x450 net/socket.c:2334
__x64_sys_recvmsg+0x4a/0x70 net/socket.c:2334
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
ipv6_local_error+0x1a7/0x9e0 net/ipv6/datagram.c:334
__ip6_append_data+0x129f/0x4fd0 net/ipv6/ip6_output.c:1311
ip6_make_skb+0x6cc/0xcf0 net/ipv6/ip6_output.c:1775
udpv6_sendmsg+0x3f8e/0x45d0 net/ipv6/udp.c:1384
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
__sys_sendto+0x8c4/0xac0 net/socket.c:1788
__do_sys_sendto net/socket.c:1800 [inline]
__se_sys_sendto+0x107/0x130 net/socket.c:1796
__x64_sys_sendto+0x6e/0x90 net/socket.c:1796
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Bytes 4-7 of 28 are uninitialized
Memory access of size 28 starts at
ffff8881937bfce0
Data copied to user address
0000000020000000
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Mark Rutland [Fri, 7 Dec 2018 18:39:23 +0000 (18:39 +0000)]
arm64: Don't trap host pointer auth use to EL2
[ Upstream commit
b3669b1e1c09890d61109a1a8ece2c5b66804714 ]
To allow EL0 (and/or EL1) to use pointer authentication functionality,
we must ensure that pointer authentication instructions and accesses to
pointer authentication keys are not trapped to EL2.
This patch ensures that HCR_EL2 is configured appropriately when the
kernel is booted at EL2. For non-VHE kernels we set HCR_EL2.{API,APK},
ensuring that EL1 can access keys and permit EL0 use of instructions.
For VHE kernels host EL0 (TGE && E2H) is unaffected by these settings,
and it doesn't matter how we configure HCR_EL2.{API,APK}, so we don't
bother setting them.
This does not enable support for KVM guests, since KVM manages HCR_EL2
itself when running VMs.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Acked-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Mark Rutland [Fri, 7 Dec 2018 18:39:21 +0000 (18:39 +0000)]
arm64/kvm: consistently handle host HCR_EL2 flags
[ Upstream commit
4eaed6aa2c628101246bcabc91b203bfac1193f8 ]
In KVM we define the configuration of HCR_EL2 for a VHE HOST in
HCR_HOST_VHE_FLAGS, but we don't have a similar definition for the
non-VHE host flags, and open-code HCR_RW. Further, in head.S we
open-code the flags for VHE and non-VHE configurations.
In future, we're going to want to configure more flags for the host, so
lets add a HCR_HOST_NVHE_FLAGS defintion, and consistently use both
HCR_HOST_VHE_FLAGS and HCR_HOST_NVHE_FLAGS in the kvm code and head.S.
We now use mov_q to generate the HCR_EL2 value, as we use when
configuring other registers in head.S.
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Kristina Martsenko <kristina.martsenko@arm.com>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Fri, 9 Nov 2018 15:29:01 +0000 (20:59 +0530)]
scsi: target: iscsi: cxgbit: fix csk leak
[ Upstream commit
ed076c55b359cc9982ca8b065bcc01675f7365f6 ]
In case of arp failure call cxgbit_put_csk() to free csk.
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Varun Prakash [Wed, 19 Sep 2018 14:14:57 +0000 (19:44 +0530)]
scsi: target: iscsi: cxgbit: fix csk leak
[ Upstream commit
801df68d617e3cb831f531c99fa6003620e6b343 ]
csk leak can happen if a new TCP connection gets established after
cxgbit_accept_np() returns, to fix this leak free remaining csk in
cxgbit_free_np().
Signed-off-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Sasha Levin [Mon, 14 Jan 2019 14:59:28 +0000 (09:59 -0500)]
Revert "scsi: target: iscsi: cxgbit: fix csk leak"
This reverts commit
c9cef2c71a89a2c926dae8151f9497e72f889315.
A wrong commit message was used for the stable commit because of a human
error (and duplicate commit subject lines).
This patch reverts this error, and the following patches add the two
upstream commits.
Signed-off-by: Sasha Levin <sashal@kernel.org>
Loic Poulain [Tue, 4 Dec 2018 12:25:32 +0000 (13:25 +0100)]
mmc: sdhci-msm: Disable CDR function on TX
commit
a89e7bcb18081c611eb6cf50edd440fa4983a71a upstream.
The Clock Data Recovery (CDR) circuit allows to automatically adjust
the RX sampling-point/phase for high frequency cards (SDR104, HS200...).
CDR is automatically enabled during DLL configuration.
However, according to the APQ8016 reference manual, this function
must be disabled during TX and tuning phase in order to prevent any
interferences during tuning challenges and unexpected phase alteration
during TX transfers.
This patch enables/disables CDR according to the current transfer mode.
This fixes sporadic write transfer issues observed with some SDR104 and
HS200 cards.
Inspired by sdhci-msm downstream patch:
https://chromium-review.googlesource.com/c/chromiumos/third_party/kernel/+/432516/
Reported-by: Leonid Segal <leonid.s@variscite.com>
Reported-by: Manabu Igusa <migusa@arrowjapan.com>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
[georgi: backport to v4.19+]
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 28 Dec 2018 00:24:49 +0000 (01:24 +0100)]
netfilter: nf_conncount: fix argument order to find_next_bit
commit
a007232066f6839d6f256bab21e825d968f1a163 upstream.
Size and 'next bit' were swapped, this bug could cause worker to
reschedule itself even if system was idle.
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Fri, 28 Dec 2018 00:24:48 +0000 (01:24 +0100)]
netfilter: nf_conncount: speculative garbage collection on empty lists
commit
c80f10bc973af2ace6b1414724eeff61eaa71837 upstream.
Instead of removing a empty list node that might be reintroduced soon
thereafter, tentatively place the empty list node on the list passed to
tree_nodes_free(), then re-check if the list is empty again before erasing
it from the tree.
[ Florian: rebase on top of pending nf_conncount fixes ]
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pablo Neira Ayuso [Fri, 28 Dec 2018 00:24:47 +0000 (01:24 +0100)]
netfilter: nf_conncount: move all list iterations under spinlock
commit
2f971a8f425545da52ca0e6bee81f5b1ea0ccc5f upstream.
Two CPUs may race to remove a connection from the list, the existing
conn->dead will result in a use-after-free. Use the per-list spinlock to
protect list iterations.
As all accesses to the list now happen while holding the per-list lock,
we no longer need to delay free operations with rcu.
Joint work with Florian.
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 28 Dec 2018 00:24:46 +0000 (01:24 +0100)]
netfilter: nf_conncount: merge lookup and add functions
commit
df4a902509766897f7371fdfa4c3bf8bc321b55d upstream.
'lookup' is always followed by 'add'.
Merge both and make the list-walk part of nf_conncount_add().
This also avoids one unneeded unlock/re-lock pair.
Extra care needs to be taken in count_tree, as we only hold rcu
read lock, i.e. we can only insert to an existing tree node after
acquiring its lock and making sure it has a nonzero count.
As a zero count should be rare, just fall back to insert_tree()
(which acquires tree lock).
This issue and its solution were pointed out by Shawn Bohrer
during patch review.
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 28 Dec 2018 00:24:45 +0000 (01:24 +0100)]
netfilter: nf_conncount: restart search when nodes have been erased
commit
e8cfb372b38a1b8979aa7f7631fb5e7b11c3793c upstream.
Shawn Bohrer reported a following crash:
|RIP: 0010:rb_erase+0xae/0x360
[..]
Call Trace:
nf_conncount_destroy+0x59/0xc0 [nf_conncount]
cleanup_match+0x45/0x70 [ip_tables]
...
Shawn tracked this down to bogus 'parent' pointer:
Problem is that when we insert a new node, then there is a chance that
the 'parent' that we found was also passed to tree_nodes_free() (because
that node was empty) for erase+free.
Instead of trying to be clever and detect when this happens, restart
the search if we have evicted one or more nodes. To prevent frequent
restarts, do not perform gc on the second round.
Also, unconditionally schedule the gc worker.
The condition
gc_count > ARRAY_SIZE(gc_nodes))
cannot be true unless tree grows very large, as the height of the tree
will be low even with hundreds of nodes present.
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reported-by: Shawn Bohrer <sbohrer@cloudflare.com>
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 28 Dec 2018 00:24:44 +0000 (01:24 +0100)]
netfilter: nf_conncount: split gc in two phases
commit
f7fcc98dfc2d136722007fec0debbed761679b94 upstream.
The lockless workqueue garbage collector can race with packet path
garbage collector to delete list nodes, as it calls tree_nodes_free()
with the addresses of nodes that might have been free'd already from
another cpu.
To fix this, split gc into two phases.
One phase to perform gc on the connections: From a locking perspective,
this is the same as count_tree(): we hold rcu lock, but we do not
change the tree, we only change the nodes' contents.
The second phase acquires the tree lock and reaps empty nodes.
This avoids a race condition of the garbage collection vs. packet path:
If a node has been free'd already, the second phase won't find it anymore.
This second phase is, from locking perspective, same as insert_tree().
The former only modifies nodes (list content, count), latter modifies
the tree itself (rb_erase or rb_insert).
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Florian Westphal [Fri, 28 Dec 2018 00:24:43 +0000 (01:24 +0100)]
netfilter: nf_conncount: don't skip eviction when age is negative
commit
4cd273bb91b3001f623f516ec726c49754571b1a upstream.
age is signed integer, so result can be negative when the timestamps
have a large delta. In this case we want to discard the entry.
Instead of using age >= 2 || age < 0, just make it unsigned.
Fixes:
b36e4523d4d56 ("netfilter: nf_conncount: fix garbage collection confirm race")
Reviewed-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Shawn Bohrer [Fri, 28 Dec 2018 00:24:42 +0000 (01:24 +0100)]
netfilter: nf_conncount: replace CONNCOUNT_LOCK_SLOTS with CONNCOUNT_SLOTS
commit
c78e7818f16f687389174c4569243abbec8dc68f upstream.
Most of the time these were the same value anyway, but when
CONFIG_LOCKDEP was enabled we would use a smaller number of locks to
reduce overhead. Unfortunately having two values is confusing and not
worth the complexity.
This fixes a bug where tree_gc_worker() would only GC up to
CONNCOUNT_LOCK_SLOTS trees which meant when CONFIG_LOCKDEP was enabled
not all trees would be GCed by tree_gc_worker().
Fixes:
5c789e131cbb9 ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Shawn Bohrer <sbohrer@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oliver Hartkopp [Fri, 4 Jan 2019 14:55:26 +0000 (15:55 +0100)]
can: gw: ensure DLC boundaries after CAN frame modification
commit
0aaa81377c5a01f686bcdb8c7a6929a7bf330c68 upstream.
Muyu Yu provided a POC where user root with CAP_NET_ADMIN can create a CAN
frame modification rule that makes the data length code a higher value than
the available CAN frame data size. In combination with a configured checksum
calculation where the result is stored relatively to the end of the data
(e.g. cgw_csum_xor_rel) the tail of the skb (e.g. frag_list pointer in
skb_shared_info) can be rewritten which finally can cause a system crash.
Michael Kubecek suggested to drop frames that have a DLC exceeding the
available space after the modification process and provided a patch that can
handle CAN FD frames too. Within this patch we also limit the length for the
checksum calculations to the maximum of Classic CAN data length (8).
CAN frames that are dropped by these additional checks are counted with the
CGW_DELETED counter which indicates misconfigurations in can-gw rules.
This fixes CVE-2019-3701.
Reported-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Reported-by: Marcus Meissner <meissner@suse.de>
Suggested-by: Michal Kubecek <mkubecek@suse.cz>
Tested-by: Muyu Yu <ieatmuttonchuan@gmail.com>
Tested-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Wed, 9 Jan 2019 01:17:40 +0000 (01:17 +0000)]
tty: Don't hold ldisc lock in tty_reopen() if ldisc present
commit
d3736d82e8169768218ee0ef68718875918091a0 upstream.
Try to get reference for ldisc during tty_reopen().
If ldisc present, we don't need to do tty_ldisc_reinit() and lock the
write side for line discipline semaphore.
Effectively, it optimizes fast-path for tty_reopen(), but more
importantly it won't interrupt ongoing IO on the tty as no ldisc change
is needed.
Fixes user-visible issue when tty_reopen() interrupted login process for
user with a long password, observed and reported by Lukas.
Fixes:
c96cf923a98d ("tty: Don't block on IO when ldisc change is pending")
Fixes:
83d817f41070 ("tty: Hold tty_ldisc_lock() during tty_reopen()")
Cc: Jiri Slaby <jslaby@suse.com>
Reported-by: Lukas F. Hartmann <lukas@mntmn.com>
Tested-by: Lukas F. Hartmann <lukas@mntmn.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:49 +0000 (00:24 +0000)]
tty: Simplify tty->count math in tty_reopen()
commit
cf62a1a13749db0d32b5cdd800ea91a4087319de upstream.
As notted by Jiri, tty_ldisc_reinit() shouldn't rely on tty counter.
Simplify math by increasing the counter after reinit success.
Cc: Jiri Slaby <jslaby@suse.com>
Link: lkml.kernel.org/r/<
20180829022353.23568-2-dima@arista.com>
Suggested-by: Jiri Slaby <jslaby@suse.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:47 +0000 (00:24 +0000)]
tty: Hold tty_ldisc_lock() during tty_reopen()
commit
83d817f41070c48bc3eb7ec18e43000a548fca5c upstream.
tty_ldisc_reinit() doesn't race with neither tty_ldisc_hangup()
nor set_ldisc() nor tty_ldisc_release() as they use tty lock.
But it races with anyone who expects line discipline to be the same
after hoding read semaphore in tty_ldisc_ref().
We've seen the following crash on v4.9.108 stable:
BUG: unable to handle kernel paging request at
0000000000002260
IP: [..] n_tty_receive_buf_common+0x5f/0x86d
Workqueue: events_unbound flush_to_ldisc
Call Trace:
[..] n_tty_receive_buf2
[..] tty_ldisc_receive_buf
[..] flush_to_ldisc
[..] process_one_work
[..] worker_thread
[..] kthread
[..] ret_from_fork
tty_ldisc_reinit() should be called with ldisc_sem hold for writing,
which will protect any reader against line discipline changes.
Cc: Jiri Slaby <jslaby@suse.com>
Cc: stable@vger.kernel.org # b027e2298bd5 ("tty: fix data race between tty_init_dev and flush of buf")
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Reported-by: syzbot+3aa9784721dfb90e984d@syzkaller.appspotmail.com
Tested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Tested-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dmitry Safonov [Thu, 1 Nov 2018 00:24:46 +0000 (00:24 +0000)]
tty/ldsem: Wake up readers after timed out down_write()
commit
231f8fd0cca078bd4396dd7e380db813ac5736e2 upstream.
ldsem_down_read() will sleep if there is pending writer in the queue.
If the writer times out, readers in the queue should be woken up,
otherwise they may miss a chance to acquire the semaphore until the last
active reader will do ldsem_up_read().
There was a couple of reports where there was one active reader and
other readers soft locked up:
Showing all locks held in the system:
2 locks held by khungtaskd/17:
#0: (rcu_read_lock){......}, at: watchdog+0x124/0x6d1
#1: (tasklist_lock){.+.+..}, at: debug_show_all_locks+0x72/0x2d3
2 locks held by askfirst/123:
#0: (&tty->ldisc_sem){.+.+.+}, at: ldsem_down_read+0x46/0x58
#1: (&ldata->atomic_read_lock){+.+...}, at: n_tty_read+0x115/0xbe4
Prevent readers wait for active readers to release ldisc semaphore.
Link: lkml.kernel.org/r/
20171121132855.ajdv4k6swzhvktl6@wfg-t540p.sh.intel.com
Link: lkml.kernel.org/r/
20180907045041.GF1110@shao2-debian
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <rong.a.chen@intel.com>
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Wed, 16 Jan 2019 21:04:38 +0000 (22:04 +0100)]
Linux 4.19.16
Filipe Manana [Mon, 10 Dec 2018 17:53:35 +0000 (17:53 +0000)]
Btrfs: use nofs context when initializing security xattrs to avoid deadlock
commit
827aa18e7b903c5ff3b3cd8fec328a99b1dbd411 upstream.
When initializing the security xattrs, we are holding a transaction handle
therefore we need to use a GFP_NOFS context in order to avoid a deadlock
with reclaim in case it's triggered.
Fixes:
39a27ec1004e8 ("btrfs: use GFP_KERNEL for xattr and acl allocations")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 19 Nov 2018 14:15:36 +0000 (14:15 +0000)]
Btrfs: fix deadlock when enabling quotas due to concurrent snapshot creation
commit
9a6f209e36500efac51528132a3e3083586eda5f upstream.
If the quota enable and snapshot creation ioctls are called concurrently
we can get into a deadlock where the task enabling quotas will deadlock
on the fs_info->qgroup_ioctl_lock mutex because it attempts to lock it
twice, or the task creating a snapshot tries to commit the transaction
while the task enabling quota waits for the former task to commit the
transaction while holding the mutex. The following time diagrams show how
both cases happen.
First scenario:
CPU 0 CPU 1
btrfs_ioctl()
btrfs_ioctl_quota_ctl()
btrfs_quota_enable()
mutex_lock(fs_info->qgroup_ioctl_lock)
btrfs_start_transaction()
btrfs_ioctl()
btrfs_ioctl_snap_create_v2
create_snapshot()
--> adds snapshot to the
list pending_snapshots
of the current
transaction
btrfs_commit_transaction()
create_pending_snapshots()
create_pending_snapshot()
qgroup_account_snapshot()
btrfs_qgroup_inherit()
mutex_lock(fs_info->qgroup_ioctl_lock)
--> deadlock, mutex already locked
by this task at
btrfs_quota_enable()
Second scenario:
CPU 0 CPU 1
btrfs_ioctl()
btrfs_ioctl_quota_ctl()
btrfs_quota_enable()
mutex_lock(fs_info->qgroup_ioctl_lock)
btrfs_start_transaction()
btrfs_ioctl()
btrfs_ioctl_snap_create_v2
create_snapshot()
--> adds snapshot to the
list pending_snapshots
of the current
transaction
btrfs_commit_transaction()
--> waits for task at
CPU 0 to release
its transaction
handle
btrfs_commit_transaction()
--> sees another task started
the transaction commit first
--> releases its transaction
handle
--> waits for the transaction
commit to be completed by
the task at CPU 1
create_pending_snapshot()
qgroup_account_snapshot()
btrfs_qgroup_inherit()
mutex_lock(fs_info->qgroup_ioctl_lock)
--> deadlock, task at CPU 0
has the mutex locked but
it is waiting for us to
finish the transaction
commit
So fix this by setting the quota enabled flag in fs_info after committing
the transaction at btrfs_quota_enable(). This ends up serializing quota
enable and snapshot creation as if the snapshot creation happened just
before the quota enable request. The quota rescan task, scheduled after
committing the transaction in btrfs_quote_enable(), will do the accounting.
Fixes:
6426c7ad697d ("btrfs: qgroup: Fix qgroup accounting when creating snapshot")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Mon, 19 Nov 2018 09:48:12 +0000 (09:48 +0000)]
Btrfs: fix access to available allocation bits when starting balance
commit
5a8067c0d17feb7579db0476191417b441a8996e upstream.
The available allocation bits members from struct btrfs_fs_info are
protected by a sequence lock, and when starting balance we access them
incorrectly in two different ways:
1) In the read sequence lock loop at btrfs_balance() we use the values we
read from fs_info->avail_*_alloc_bits and we can immediately do actions
that have side effects and can not be undone (printing a message and
jumping to a label). This is wrong because a retry might be needed, so
our actions must not have side effects and must be repeatable as long
as read_seqretry() returns a non-zero value. In other words, we were
essentially ignoring the sequence lock;
2) Right below the read sequence lock loop, we were reading the values
from avail_metadata_alloc_bits and avail_data_alloc_bits without any
protection from concurrent writers, that is, reading them outside of
the read sequence lock critical section.
So fix this by making sure we only read the available allocation bits
while in a read sequence lock critical section and that what we do in the
critical section is repeatable (has nothing that can not be undone) so
that any eventual retry that is needed is handled properly.
Fixes:
de98ced9e743 ("Btrfs: use seqlock to protect fs_info->avail_{data, metadata, system}_alloc_bits")
Fixes:
14506127979a ("btrfs: fix a bogus warning when converting only data or metadata")
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Will Deacon [Thu, 3 Jan 2019 18:00:39 +0000 (18:00 +0000)]
arm64: compat: Don't pull syscall number from regs in arm_compat_syscall
commit
53290432145a8eb143fe29e06e9c1465d43dc723 upstream.
The syscall number may have been changed by a tracer, so we should pass
the actual number in from the caller instead of pulling it from the
saved r7 value directly.
Cc: <stable@vger.kernel.org>
Cc: Pi-Hsun Shih <pihsun@chromium.org>
Reviewed-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoffer Dall [Tue, 11 Dec 2018 12:23:57 +0000 (13:23 +0100)]
KVM: arm/arm64: Fix VMID alloc race by reverting to lock-less
commit
fb544d1ca65a89f7a3895f7531221ceeed74ada7 upstream.
We recently addressed a VMID generation race by introducing a read/write
lock around accesses and updates to the vmid generation values.
However, kvm_arch_vcpu_ioctl_run() also calls need_new_vmid_gen() but
does so without taking the read lock.
As far as I can tell, this can lead to the same kind of race:
VM 0, VCPU 0 VM 0, VCPU 1
------------ ------------
update_vttbr (vmid 254)
update_vttbr (vmid 1) // roll over
read_lock(kvm_vmid_lock);
force_vm_exit()
local_irq_disable
need_new_vmid_gen == false //because vmid gen matches
enter_guest (vmid 254)
kvm_arch.vttbr = <PGD>:<VMID 1>
read_unlock(kvm_vmid_lock);
enter_guest (vmid 1)
Which results in running two VCPUs in the same VM with different VMIDs
and (even worse) other VCPUs from other VMs could now allocate clashing
VMID 254 from the new generation as long as VCPU 0 is not exiting.
Attempt to solve this by making sure vttbr is updated before another CPU
can observe the updated VMID generation.
Cc: stable@vger.kernel.org
Fixes:
f0cf47d939d0 "KVM: arm/arm64: Close VMID generation race"
Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Vasily Averin [Mon, 24 Dec 2018 11:44:52 +0000 (14:44 +0300)]
sunrpc: use-after-free in svc_process_common()
commit
d4b09acf924b84bae77cad090a9d108e70b43643 upstream.
if node have NFSv41+ mounts inside several net namespaces
it can lead to use-after-free in svc_process_common()
svc_process_common()
/* Setup reply header */
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr(rqstp); <<< HERE
svc_process_common() can use incorrect rqstp->rq_xprt,
its caller function bc_svc_process() takes it from serv->sv_bc_xprt.
The problem is that serv is global structure but sv_bc_xprt
is assigned per-netnamespace.
According to Trond, the whole "let's set up rqstp->rq_xprt
for the back channel" is nothing but a giant hack in order
to work around the fact that svc_process_common() uses it
to find the xpt_ops, and perform a couple of (meaningless
for the back channel) tests of xpt_flags.
All we really need in svc_process_common() is to be able to run
rqstp->rq_xprt->xpt_ops->xpo_prep_reply_hdr()
Bruce J Fields points that this xpo_prep_reply_hdr() call
is an awfully roundabout way just to do "svc_putnl(resv, 0);"
in the tcp case.
This patch does not initialiuze rqstp->rq_xprt in bc_svc_process(),
now it calls svc_process_common() with rqstp->rq_xprt = NULL.
To adjust reply header svc_process_common() just check
rqstp->rq_prot and calls svc_tcp_prep_reply_hdr() for tcp case.
To handle rqstp->rq_xprt = NULL case in functions called from
svc_process_common() patch intruduces net namespace pointer
svc_rqst->rq_bc_net and adjust SVC_NET() definition.
Some other function was also adopted to properly handle described case.
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Cc: stable@vger.kernel.org
Fixes:
23c20ecd4475 ("NFS: callback up - users counting cleanup")
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
v2: added lost extern svc_tcp_prep_reply_hdr()
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jan Stancek [Tue, 8 Jan 2019 23:23:28 +0000 (15:23 -0800)]
mm: page_mapped: don't assume compound page is huge or THP
commit
8ab88c7169b7fba98812ead6524b9d05bc76cf00 upstream.
LTP proc01 testcase has been observed to rarely trigger crashes
on arm64:
page_mapped+0x78/0xb4
stable_page_flags+0x27c/0x338
kpageflags_read+0xfc/0x164
proc_reg_read+0x7c/0xb8
__vfs_read+0x58/0x178
vfs_read+0x90/0x14c
SyS_read+0x60/0xc0
The issue is that page_mapped() assumes that if compound page is not
huge, then it must be THP. But if this is 'normal' compound page
(COMPOUND_PAGE_DTOR), then following loop can keep running (for
HPAGE_PMD_NR iterations) until it tries to read from memory that isn't
mapped and triggers a panic:
for (i = 0; i < hpage_nr_pages(page); i++) {
if (atomic_read(&page[i]._mapcount) >= 0)
return true;
}
I could replicate this on x86 (v4.20-rc4-98-g60b548237fed) only
with a custom kernel module [1] which:
- allocates compound page (PAGEC) of order 1
- allocates 2 normal pages (COPY), which are initialized to 0xff (to
satisfy _mapcount >= 0)
- 2 PAGEC page structs are copied to address of first COPY page
- second page of COPY is marked as not present
- call to page_mapped(COPY) now triggers fault on access to 2nd COPY
page at offset 0x30 (_mapcount)
[1] https://github.com/jstancek/reproducers/blob/master/kernel/page_mapped_crash/repro.c
Fix the loop to iterate for "1 << compound_order" pages.
Kirrill said "IIRC, sound subsystem can producuce custom mapped compound
pages".
Link: http://lkml.kernel.org/r/c440d69879e34209feba21e12d236d06bc0a25db.1543577156.git.jstancek@redhat.com
Fixes:
e1534ae95004 ("mm: differentiate page_mapped() from page_mapcount() for compound pages")
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Debugged-by: Laszlo Ersek <lersek@redhat.com>
Suggested-by: "Kirill A. Shutemov" <kirill@shutemov.name>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 1 Jan 2019 03:34:31 +0000 (22:34 -0500)]
ext4: fix special inode number checks in __ext4_iget()
commit
191ce17876c9367819c4b0a25b503c0f6d9054d8 upstream.
The check for special (reserved) inode number checks in __ext4_iget()
was broken by commit
8a363970d1dc: ("ext4: avoid declaring fs
inconsistent due to invalid file handles"). This was caused by a
botched reversal of the sense of the flag now known as
EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL).
Fix the logic appropriately.
Fixes:
8a363970d1dc ("ext4: avoid declaring fs inconsistent...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 05:11:07 +0000 (00:11 -0500)]
ext4: track writeback errors using the generic tracking infrastructure
commit
95cb67138746451cc84cf8e516e14989746e93b0 upstream.
We already using mapping_set_error() in fs/ext4/page_io.c, so all we
need to do is to use file_check_and_advance_wb_err() when handling
fsync() requests in ext4_sync_file().
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 05:10:48 +0000 (00:10 -0500)]
ext4: use ext4_write_inode() when fsyncing w/o a journal
commit
ad211f3e94b314a910d4af03178a0b52a7d1ee0a upstream.
In no-journal mode, we previously used __generic_file_fsync() in
no-journal mode. This triggers a lockdep warning, and in addition,
it's not safe to depend on the inode writeback mechanism in the case
ext4. We can solve both problems by calling ext4_write_inode()
directly.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Mon, 31 Dec 2018 04:20:39 +0000 (23:20 -0500)]
ext4: avoid kernel warning when writing the superblock to a dead device
commit
e86807862e6880809f191c4cea7f88a489f0ed34 upstream.
The xfstests generic/475 test switches the underlying device with
dm-error while running a stress test. This results in a large number
of file system errors, and since we can't lock the buffer head when
marking the superblock dirty in the ext4_grp_locked_error() case, it's
possible the superblock to be !buffer_uptodate() without
buffer_write_io_error() being true.
We need to set buffer_uptodate() before we call mark_buffer_dirty() or
this will trigger a WARN_ON. It's safe to do this since the
superblock must have been properly read into memory or the mount would
have been successful. So if buffer_uptodate() is not set, we can
safely assume that this happened due to a failed attempt to write the
superblock.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 25 Dec 2018 05:56:33 +0000 (00:56 -0500)]
ext4: fix a potential fiemap/page fault deadlock w/ inline_data
commit
2b08b1f12cd664dc7d5c84ead9ff25ae97ad5491 upstream.
The ext4_inline_data_fiemap() function calls fiemap_fill_next_extent()
while still holding the xattr semaphore. This is not necessary and it
triggers a circular lockdep warning. This is because
fiemap_fill_next_extent() could trigger a page fault when it writes
into page which triggers a page fault. If that page is mmaped from
the inline file in question, this could very well result in a
deadlock.
This problem can be reproduced using generic/519 with a file system
configuration which has the inline_data feature enabled.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Theodore Ts'o [Tue, 25 Dec 2018 01:27:08 +0000 (20:27 -0500)]
ext4: make sure enough credits are reserved for dioread_nolock writes
commit
812c0cab2c0dfad977605dbadf9148490ca5d93f upstream.
There are enough credits reserved for most dioread_nolock writes;
however, if the extent tree is sufficiently deep, and/or quota is
enabled, the code was not allowing for all eventualities when
reserving journal credits for the unwritten extent conversion.
This problem can be seen using xfstests ext4/034:
WARNING: CPU: 1 PID: 257 at fs/ext4/ext4_jbd2.c:271 __ext4_handle_dirty_metadata+0x10c/0x180
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work
RIP: 0010:__ext4_handle_dirty_metadata+0x10c/0x180
...
EXT4-fs: ext4_free_blocks:4938: aborting transaction: error 28 in __ext4_handle_dirty_metadata
EXT4: jbd2_journal_dirty_metadata failed: handle type 11 started at line 4921, credits 4/0, errcode -28
EXT4-fs error (device dm-1) in ext4_free_blocks:4950: error 28
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ilya Dryomov [Tue, 8 Jan 2019 18:47:38 +0000 (19:47 +0100)]
rbd: don't return 0 on unmap if RBD_DEV_FLAG_REMOVING is set
commit
85f5a4d666fd9be73856ed16bb36c5af5b406b29 upstream.
There is a window between when RBD_DEV_FLAG_REMOVING is set and when
the device is removed from rbd_dev_list. During this window, we set
"already" and return 0.
Returning 0 from write(2) can confuse userspace tools because
0 indicates that nothing was written. In particular, "rbd unmap"
will retry the write multiple times a second:
10:28:05.463299 write(4, "0", 1) = 0
10:28:05.463509 write(4, "0", 1) = 0
10:28:05.463720 write(4, "0", 1) = 0
10:28:05.463942 write(4, "0", 1) = 0
10:28:05.464155 write(4, "0", 1) = 0
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Tested-by: Dongsheng Yang <dongsheng.yang@easystack.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Tue, 8 Jan 2019 21:11:28 +0000 (16:11 -0500)]
drm/amdgpu: Don't fail resume process if resuming atomic state fails
commit
2d1af6a11cb9d88e0e3dd10258904c437fe1b315 upstream.
This is an ugly one unfortunately. Currently, all DRM drivers supporting
atomic modesetting will save the state that userspace had set before
suspending, then attempt to restore that state on resume. This probably
worked very well at one point, like many other things, until DP MST came
into the picture. While it's easy to restore state on normal display
connectors that were disconnected during suspend regardless of their
state post-resume, this can't really be done with MST because of the
fact that setting up a downstream sink requires performing sideband
transactions between the source and the MST hub, sending out the ACT
packets, etc.
Because of this, there isn't really a guarantee that we can restore the
atomic state we had before suspend once we've resumed. This sucks pretty
bad, but so far I haven't run into any compositors that this actually
causes serious issues with. Most compositors will notice the hotplug we
send afterwards, and then reprobe state.
Since nouveau and i915 also don't fail the suspend/resume process due to
failing to restore the atomic state, let's make amdgpu match this
behavior. Better to resume the GPU properly, then to stop the process
half way because of a potentially unavoidable atomic commit failure.
Eventually, we'll have a real fix for this problem on the DRM level. But
we've got some more important low-hanging fruit to deal with first.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-3-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Tue, 8 Jan 2019 21:11:27 +0000 (16:11 -0500)]
drm/amdgpu: Don't ignore rc from drm_dp_mst_topology_mgr_resume()
commit
fe7553bef8d676d1d8b40666868b33ec39b9df5d upstream.
drm_dp_mst_topology_mgr_resume() returns whether or not it managed to
find the topology in question after a suspend resume cycle, and the
driver is supposed to check this value and disable MST accordingly if
it's gone-in addition to sending a hotplug in order to notify userspace
that something changed during suspend.
Currently, amdgpu just makes the mistake of ignoring the return code
from drm_dp_mst_topology_mgr_resume() which means that if a topology was
removed in suspend, amdgpu never notices and assumes it's still
connected which leads to all sorts of problems.
So, fix this by actually checking the rc from
drm_dp_mst_topology_mgr_resume(). Also, reformat the rest of the
function while we're at it to fix the over-indenting.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: <stable@vger.kernel.org> # v4.15+
Link: https://patchwork.freedesktop.org/patch/msgid/20190108211133.32564-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chris Wilson [Sat, 22 Dec 2018 03:06:23 +0000 (03:06 +0000)]
drm/i915: Unwind failure on pinning the gen7 ppgtt
commit
280d479b310298dfeb1d6f9a1617eca37beb6ce4 upstream.
If we fail to pin the ggtt vma slot for the ppgtt page tables, we need
to unwind the locals before reporting the error. Or else on subsequent
attempts to bind the page tables into the ggtt, we will already believe
that the vma has been pinned and continue on blithely. If something else
should happen to be at that location, choas ensues.
Fixes:
a2bbf7148342 ("drm/i915/gtt: Only keep gen6 page directories pinned while active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Cc: <stable@vger.kernel.org> # v4.19+
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181222030623.21710-1-chris@chris-wilson.co.uk
(cherry picked from commit
d4de753526f4d99f541f1b6ed1d963005c09700c)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ivan Mironov [Tue, 8 Jan 2019 07:23:52 +0000 (12:23 +0500)]
drm/fb-helper: Partially bring back workaround for bugs of SDL 1.2
commit
62d85b3bf9d978ed4b6b2aeef5cf0ccf1423906e upstream.
SDL 1.2 sets all fields related to the pixel format to zero in some
cases[1]. Prior to commit
db05c48197759 ("drm: fb-helper: Reject all
pixel format changing requests"), there was an unintentional workaround
for this that existed for more than a decade. First in device-specific DRM
drivers, then here in drm_fb_helper.c.
Previous code containing this workaround just ignores pixel format fields
from userspace code. Not a good thing either, as this way, driver may
silently use pixel format different from what client actually requested,
and this in turn will lead to displaying garbage on the screen. I think
that returning EINVAL to userspace in this particular case is the right
option, so I decided to left code from problematic commit untouched
instead of just reverting it entirely.
Here is the steps required to reproduce this problem exactly:
1) Compile fceux[2] with SDL 1.2.15 and without GTK or OpenGL
support. SDL should be compiled with fbdev support (which is
on by default).
2) Create /etc/fb.modes with following contents (values seems
not used, and just required to trigger problematic code in
SDL):
mode "test"
geometry 1 1 1 1 1
timings 1 1 1 1 1 1 1
endmode
3) Create ~/.fceux/fceux.cfg with following contents:
SDL.Hotkeys.Quit = 27
SDL.DoubleBuffering = 1
4) Ensure that screen resolution is at least 1280x960 (e.g.
append "video=Virtual-1:1280x960-32" to the kernel cmdline
for qemu/QXL).
5) Try to run fceux on VT with some ROM file[3]:
# ./fceux color_test.nes
[1] SDL 1.2.15 source code, src/video/fbcon/SDL_fbvideo.c,
FB_SetVideoMode()
[2] http://www.fceux.com
[3] Example ROM: https://github.com/bokuweb/rustynes/blob/master/roms/color_test.nes
Reported-by: saahriktu <mail@saahriktu.org>
Suggested-by: saahriktu <mail@saahriktu.org>
Cc: stable@vger.kernel.org
Fixes:
db05c48197759 ("drm: fb-helper: Reject all pixel format changing requests")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
[danvet: Delete misleading comment.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190108072353.28078-2-mironov.ivan@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Neil Armstrong [Fri, 28 Sep 2018 12:05:55 +0000 (14:05 +0200)]
drm/fb_helper: Allow leaking fbdev smem_start
commit
4be9bd10e22dfc7fc101c5cf5969ef2d3a042d8a upstream.
Since "drm/fb: Stop leaking physical address", the default behaviour of
the DRM fbdev emulation is to set the smem_base to 0 and pass the new
FBINFO_HIDE_SMEM_START flag.
The main reason is to avoid leaking physical addresse to user-space, and
it follows a general move over the kernel code to avoid user-space to
manipulate physical addresses and then use some other mechanisms like
dma-buf to transfer physical buffer handles over multiple subsystems.
But, a lot of devices depends on closed sources binaries to enable
OpenGL hardware acceleration that uses this smem_start value to
pass physical addresses to out-of-tree modules in order to render
into these physical adresses. These should use dma-buf buffers allocated
from the DRM display device instead and stop relying on fbdev overallocation
to gather DMA memory (some HW vendors delivers GBM and Wayland capable
binaries, but older unsupported devices won't have these new binaries
and are doomed until an Open Source solution like Lima finalizes).
Since these devices heavily depends on this kind of software and because
the smem_start population was available for years, it's a breakage to
stop leaking smem_start without any alternative solutions.
This patch adds a Kconfig depending on the EXPERT config and an unsafe
kernel module parameter tainting the kernel when enabled.
A clear comment and Kconfig help text was added to clarify why and when
this patch should be reverted, but in the meantime it's a necessary
feature to keep.
Cc: Dave Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <skeggsb@gmail.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Ripard <maxime.ripard@bootlin.com>
Tested-by: Maxime Ripard <maxime.ripard@bootlin.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1538136355-15383-1-git-send-email-narmstrong@baylibre.com
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jerry (Fangzhi) Zuo [Mon, 17 Dec 2018 15:32:22 +0000 (10:32 -0500)]
drm/amd/display: Fix MST dp_blank REG_WAIT timeout
commit
8c9d90eebd23b6d40ddf4ce5df5ca2b932336a06 upstream.
Need to blank stream before deallocate MST payload.
[drm:generic_reg_wait [amdgpu]] *ERROR* REG_WAIT timeout 10us * 3000 tries - dce110_stream_encoder_dp_blank line:944
------------[ cut here ]------------
WARNING: CPU: 0 PID: 2201 at /var/lib/dkms/amdgpu/18.50-690240/build/amd/amdgpu/../display/dc/dc_helper.c:249 generic_reg_wait+0xe7/0x160 [amdgpu]
Call Trace:
dce110_stream_encoder_dp_blank+0x11c/0x180 [amdgpu]
core_link_disable_stream+0x40/0x230 [amdgpu]
? generic_reg_update_ex+0xdb/0x130 [amdgpu]
dce110_reset_hw_ctx_wrap+0xb7/0x1f0 [amdgpu]
dce110_apply_ctx_to_hw+0x30/0x430 [amdgpu]
? dce110_apply_ctx_for_surface+0x206/0x260 [amdgpu]
dc_commit_state+0x2ba/0x4d0 [amdgpu]
amdgpu_dm_atomic_commit_tail+0x297/0xd70 [amdgpu]
? amdgpu_bo_pin_restricted+0x58/0x260 [amdgpu]
? wait_for_completion_timeout+0x1f/0x120
? wait_for_completion_interruptible+0x1c/0x160
commit_tail+0x3d/0x60 [drm_kms_helper]
drm_atomic_helper_commit+0xf6/0x100 [drm_kms_helper]
drm_atomic_connector_commit_dpms+0xe5/0xf0 [drm]
drm_mode_obj_set_property_ioctl+0x14f/0x250 [drm]
drm_mode_connector_property_set_ioctl+0x2e/0x40 [drm]
drm_ioctl+0x1e0/0x430 [drm]
? drm_mode_connector_set_obj_prop+0x70/0x70 [drm]
? ep_read_events_proc+0xb0/0xb0
? ep_scan_ready_list.constprop.18+0x1e6/0x1f0
? timerqueue_add+0x52/0x80
amdgpu_drm_ioctl+0x49/0x80 [amdgpu]
do_vfs_ioctl+0x90/0x5f0
SyS_ioctl+0x74/0x80
do_syscall_64+0x74/0x140
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
---[ end trace
3ed7b77a97d60f72 ]---
Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 13 Nov 2018 22:57:34 +0000 (22:57 +0000)]
PCI: dwc: Move interrupt acking into the proper callback
commit
3f7bb2ec20ce07c02b2002349d256c91a463fcc5 upstream.
The write to the status register is really an ACK for the HW,
and should be treated as such by the driver. Let's move it to the
irq_ack() callback, which will prevent people from moving it around
in order to paper over other bugs.
Fixes:
8c934095fa2f ("PCI: dwc: Clear MSI interrupt status after it is handled,
not before")
Fixes:
7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API")
Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/
Reported-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 13 Nov 2018 22:57:33 +0000 (22:57 +0000)]
PCI: dwc: Take lock when ACKing an interrupt
commit
fce5423e4f431c71933d6c1f850b540a314aa6ee upstream.
Bizarrely, there is no lock taken in the irq_ack() helper. This
puts the ACK callback provided by a specific platform in a awkward
situation where there is no synchronization that would be expected
on other callback.
Introduce the required lock, giving some level of uniformity among
callbacks.
Fixes:
7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API")
Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marc Zyngier [Tue, 13 Nov 2018 22:57:32 +0000 (22:57 +0000)]
PCI: dwc: Use interrupt masking instead of disabling
commit
830920e065e90db318a0da98bf13a02b641eae7f upstream.
The dwc driver is showing an interesting level of brokeness, as it
insists on using the enable/disable set of registers to mask/unmask
MSIs, meaning that an MSIs being generated while the interrupt is in
that "disabled" state will simply be lost.
Let's move to the mask/unmask set of registers, which offers the
expected semantics.
Fixes:
7c5925afbc58 ("PCI: dwc: Move MSI IRQs allocation to IRQ domains
hierarchical API")
Link: https://lore.kernel.org/linux-pci/20181113225734.8026-1-marc.zyngier@arm.com/
Tested-by: Niklas Cassel <niklas.cassel@linaro.org>
Tested-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Tested-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Deucher [Thu, 20 Dec 2018 15:08:46 +0000 (10:08 -0500)]
drm/amdgpu: Add new VegaM pci id
commit
f6653a0e0877572c87f6dab5351e7bd6b6b7100c upstream.
Add a new pci id.
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alex Williamson [Tue, 8 Jan 2019 05:13:22 +0000 (22:13 -0700)]
vfio/type1: Fix unmap overflow off-by-one
commit
58fec830fc19208354895d9832785505046d6c01 upstream.
The below referenced commit adds a test for integer overflow, but in
doing so prevents the unmap ioctl from ever including the last page of
the address space. Subtract one to compare to the last address of the
unmap to avoid the overflow and wrap-around.
Fixes:
71a7d3d78e3c ("vfio/type1: silence integer overflow warning")
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1662291
Cc: stable@vger.kernel.org # v4.15+
Reported-by: Pei Zhang <pezhang@redhat.com>
Debugged-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Tested-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christian Lamparter [Sun, 23 Dec 2018 00:31:26 +0000 (01:31 +0100)]
mtd: rawnand: qcom: fix memory corruption that causes panic
commit
81d9bdf59092e4755fc4307c93c4589ef0fe2e0f upstream.
This patch fixes a memory corruption that occurred in the
qcom-nandc driver since it was converted to nand_scan().
On boot, an affected device will panic from a NPE at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual address 0
| pgd = (ptrval)
| [
00000000] *pgd=
00000000
| Internal error: Oops:
80000005 [#1] SMP ARM
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.9 #0
| Hardware name: Generic DT based system
| PC is at (null)
| LR is at nand_block_isbad+0x90/0xa4
| pc : [<
00000000>] lr : [<
c0592240>] psr:
80000013
| sp :
cf839d40 ip :
00000000 fp :
cfae9e20
| r10:
cf815810 r9 :
00000000 r8 :
00000000
| r7 :
00000000 r6 :
00000000 r5 :
00000001 r4 :
cf815810
| r3 :
00000000 r2 :
cfae9810 r1 :
ffffffff r0 :
cf815810
| Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
| Control:
10c5387d Table:
8020406a DAC:
00000051
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| [<
c0592240>] (nand_block_isbad) from [<
c0580a94>]
| [<
c0580a94>] (allocate_partition) from [<
c05811e4>]
| [<
c05811e4>] (add_mtd_partitions) from [<
c0581164>]
| [<
c0581164>] (parse_mtd_partitions) from [<
c057def4>]
| [<
c057def4>] (mtd_device_parse_register) from [<
c059d274>]
| [<
c059d274>] (qcom_nandc_probe) from [<
c0567f00>]
The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4. This causes the
sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_block_bad() to memset much more than what was initially
allocated by alloc_bam_transaction().
This patch restores the old behavior by reallocating the shared bam
transaction alloc_bam_transaction() after the chip was identified,
but before mtd_device_parse_register() (which is an alias for
mtd_device_register() - see panic) gets called. This fixes the
corruption and the driver is working again.
Cc: stable@vger.kernel.org
Fixes:
6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <bbrezillon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Yi Zeng [Wed, 9 Jan 2019 07:33:07 +0000 (15:33 +0800)]
i2c: dev: prevent adapter retries and timeout being set as minus value
commit
6ebec961d59bccf65d08b13fc1ad4e6272a89338 upstream.
If adapter->retries is set to a minus value from user space via ioctl,
it will make __i2c_transfer and __i2c_smbus_xfer skip the calling to
adapter->algo->master_xfer and adapter->algo->smbus_xfer that is
registered by the underlying bus drivers, and return value 0 to all the
callers. The bus driver will never be accessed anymore by all users,
besides, the users may still get successful return value without any
error or information log print out.
If adapter->timeout is set to minus value from user space via ioctl,
it will make the retrying loop in __i2c_transfer and __i2c_smbus_xfer
always break after the the first try, due to the time_after always
returns true.
Signed-off-by: Yi Zeng <yizeng@asrmicro.com>
[wsa: minor grammar updates to commit message]
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jean-Philippe Brucker [Thu, 10 Jan 2019 18:41:51 +0000 (18:41 +0000)]
ACPI/IORT: Fix rc_dma_get_range()
commit
c7777236dd8f587f6a8d6800c03df318fd4d2627 upstream.
When executed for a PCI_ROOT_COMPLEX type, iort_match_node_callback()
expects the opaque pointer argument to be a PCI bus device. At the
moment rc_dma_get_range() passes the PCI endpoint instead of the bus,
and we've been lucky to have pci_domain_nr(ptr) return 0 instead of
crashing. Pass the bus device to iort_scan_node().
Fixes:
5ac65e8c8941 ("ACPI/IORT: Support address size limit for root complexes")
Reported-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Jean-Philippe Brucker <jean-philippe.brucker@arm.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Robin Murphy <robin.murphy@arm.com>
Cc: stable@vger.kernel.org
Cc: Will Deacon <will.deacon@arm.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Fri, 4 Jan 2019 22:10:54 +0000 (23:10 +0100)]
ACPI / PMIC: xpower: Fix TS-pin current-source handling
commit
2b531d71595d2b5b12782a49b23c335869e2621e upstream.
The current-source used for the battery temp-sensor (TS) is shared with the
GPADC. For proper fuel-gauge and charger operation the TS current-source
needs to be permanently on. But to read the GPADC we need to temporary
switch the TS current-source to ondemand, so that the GPADC can use it,
otherwise we will always read an all 0 value.
The switching from on to on-ondemand is not necessary when the TS
current-source is off (this happens on devices which do not have a TS).
Prior to this commit there were 2 issues with our handling of the TS
current-source switching:
1) We were writing hardcoded values to the ADC TS pin-ctrl register,
overwriting various other unrelated bits. Specifically we were overwriting
the current-source setting for the TS and GPIO0 pins, forcing it to 80ųA
independent of its original setting. On a Chuwi Vi10 tablet this was
causing us to get a too high adc value (due to a too high current-source)
resulting in acpi_lpat_raw_to_temp() returning -ENOENT, resulting in:
ACPI Error: AE_ERROR, Returned by Handler for [UserDefinedRegion]
ACPI Error: Method parse/execution failed \_SB.SXP1._TMP, AE_ERROR
This commit fixes this by using regmap_update_bits to change only the
relevant bits.
2) At the end of intel_xpower_pmic_get_raw_temp() we were unconditionally
enabling the TS current-source even on devices where the TS-pin is not used
and the current-source thus was off on entry of the function.
This commit fixes this by checking if the TS current-source is off when
entering intel_xpower_pmic_get_raw_temp() and if so it is left as is.
Fixes:
58eefe2f3f53 (ACPI / PMIC: xpower: Do pinswitch ... reading GPADC)
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hans de Goede [Sun, 30 Dec 2018 17:25:00 +0000 (18:25 +0100)]
ACPI: power: Skip duplicate power resource references in _PRx
commit
7d7b467cb95bf29597b417d4990160d4ea6d69b9 upstream.
Some ACPI tables contain duplicate power resource references like this:
Name (_PR0, Package (0x04) // _PR0: Power Resources for D0
{
P28P,
P18P,
P18P,
CLK4
})
This causes a WARN_ON in sysfs_add_link_to_group() because we end up
adding a link to the same acpi_device twice:
sysfs: cannot create duplicate filename '/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/
808622C1:00/OVTI2680:00/power_resources_D0/LNXPOWER:0a'
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.12-301.fc29.x86_64 #1
Hardware name: Insyde CherryTrail/Type2 - Board Product Name, BIOS jumperx.T87.KFBNEEA02 04/13/2016
Call Trace:
dump_stack+0x5c/0x80
sysfs_warn_dup.cold.3+0x17/0x2a
sysfs_do_create_link_sd.isra.2+0xa9/0xb0
sysfs_add_link_to_group+0x30/0x50
acpi_power_expose_list+0x74/0xa0
acpi_power_add_remove_device+0x50/0xa0
acpi_add_single_object+0x26b/0x5f0
acpi_bus_check_add+0xc4/0x250
...
To address this issue, make acpi_extract_power_resources() check for
duplicates and simply skip them when found.
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
[ rjw: Subject & changelog, comments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Michal Hocko [Tue, 8 Jan 2019 23:23:07 +0000 (15:23 -0800)]
mm, memcg: fix reclaim deadlock with writeback
commit
63f3655f950186752236bb88a22f8252c11ce394 upstream.
Liu Bo has experienced a deadlock between memcg (legacy) reclaim and the
ext4 writeback
task1:
wait_on_page_bit+0x82/0xa0
shrink_page_list+0x907/0x960
shrink_inactive_list+0x2c7/0x680
shrink_node_memcg+0x404/0x830
shrink_node+0xd8/0x300
do_try_to_free_pages+0x10d/0x330
try_to_free_mem_cgroup_pages+0xd5/0x1b0
try_charge+0x14d/0x720
memcg_kmem_charge_memcg+0x3c/0xa0
memcg_kmem_charge+0x7e/0xd0
__alloc_pages_nodemask+0x178/0x260
alloc_pages_current+0x95/0x140
pte_alloc_one+0x17/0x40
__pte_alloc+0x1e/0x110
alloc_set_pte+0x5fe/0xc20
do_fault+0x103/0x970
handle_mm_fault+0x61e/0xd10
__do_page_fault+0x252/0x4d0
do_page_fault+0x30/0x80
page_fault+0x28/0x30
task2:
__lock_page+0x86/0xa0
mpage_prepare_extent_to_map+0x2e7/0x310 [ext4]
ext4_writepages+0x479/0xd60
do_writepages+0x1e/0x30
__writeback_single_inode+0x45/0x320
writeback_sb_inodes+0x272/0x600
__writeback_inodes_wb+0x92/0xc0
wb_writeback+0x268/0x300
wb_workfn+0xb4/0x390
process_one_work+0x189/0x420
worker_thread+0x4e/0x4b0
kthread+0xe6/0x100
ret_from_fork+0x41/0x50
He adds
"task1 is waiting for the PageWriteback bit of the page that task2 has
collected in mpd->io_submit->io_bio, and tasks2 is waiting for the
LOCKED bit the page which tasks1 has locked"
More precisely task1 is handling a page fault and it has a page locked
while it charges a new page table to a memcg. That in turn hits a
memory limit reclaim and the memcg reclaim for legacy controller is
waiting on the writeback but that is never going to finish because the
writeback itself is waiting for the page locked in the #PF path. So
this is essentially ABBA deadlock:
lock_page(A)
SetPageWriteback(A)
unlock_page(A)
lock_page(B)
lock_page(B)
pte_alloc_pne
shrink_page_list
wait_on_page_writeback(A)
SetPageWriteback(B)
unlock_page(B)
# flush A, B to clear the writeback
This accumulating of more pages to flush is used by several filesystems
to generate a more optimal IO patterns.
Waiting for the writeback in legacy memcg controller is a workaround for
pre-mature OOM killer invocations because there is no dirty IO
throttling available for the controller. There is no easy way around
that unfortunately. Therefore fix this specific issue by pre-allocating
the page table outside of the page lock. We have that handy
infrastructure for that already so simply reuse the fault-around pattern
which already does this.
There are probably other hidden __GFP_ACCOUNT | GFP_KERNEL allocations
from under a fs page locked but they should be really rare. I am not
aware of a better solution unfortunately.
[akpm@linux-foundation.org: fix mm/memory.c:__do_fault()]
[akpm@linux-foundation.org: coding-style fixes]
[mhocko@kernel.org: enhance comment, per Johannes]
Link: http://lkml.kernel.org/r/20181214084948.GA5624@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20181213092221.27270-1-mhocko@kernel.org
Fixes:
c3b94f44fcb0 ("memcg: further prevent OOM with too many dirty pages")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Liu Bo <bo.liu@linux.alibaba.com>
Debugged-by: Liu Bo <bo.liu@linux.alibaba.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Liu Bo <bo.liu@linux.alibaba.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qian Cai [Tue, 8 Jan 2019 23:23:04 +0000 (15:23 -0800)]
mm/usercopy.c: no check page span for stack objects
commit
7bff3c06997374fb9b9991536a547b840549a813 upstream.
It is easy to trigger this with CONFIG_HARDENED_USERCOPY_PAGESPAN=y,
usercopy: Kernel memory overwrite attempt detected to spans multiple pages (offset 0, size 23)!
kernel BUG at mm/usercopy.c:102!
For example,
print_worker_info
char name[WQ_NAME_LEN] = { };
char desc[WORKER_DESC_LEN] = { };
probe_kernel_read(name, wq->name, sizeof(name) - 1);
probe_kernel_read(desc, worker->desc, sizeof(desc) - 1);
__copy_from_user_inatomic
check_object_size
check_heap_object
check_page_span
This is because on-stack variables could cross PAGE_SIZE boundary, and
failed this check,
if (likely(((unsigned long)ptr & (unsigned long)PAGE_MASK) ==
((unsigned long)end & (unsigned long)PAGE_MASK)))
ptr =
FFFF889007D7EFF8
end =
FFFF889007D7F00E
Hence, fix it by checking if it is a stack object first.
[keescook@chromium.org: improve comments after reorder]
Link: http://lkml.kernel.org/r/20190103165151.GA32845@beast
Link: http://lkml.kernel.org/r/20181231030254.99441-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christoph Lameter [Tue, 8 Jan 2019 23:23:00 +0000 (15:23 -0800)]
slab: alien caches must not be initialized if the allocation of the alien cache failed
commit
09c2e76ed734a1d36470d257a778aaba28e86531 upstream.
Callers of __alloc_alien() check for NULL. We must do the same check in
__alloc_alien_cache to avoid NULL pointer dereferences on allocation
failures.
Link: http://lkml.kernel.org/r/010001680f42f192-82b4e12e-1565-4ee0-ae1f-1e98974906aa-000000@email.amazonses.com
Fixes:
49dfc304ba241 ("slab: use the lock on alien_cache, instead of the lock on array_cache")
Fixes:
c8522a3a5832b ("Slab: introduce alloc_alien")
Signed-off-by: Christoph Lameter <cl@linux.com>
Reported-by: syzbot+d6ed4ec679652b4fd4e4@syzkaller.appspotmail.com
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jack Stocker [Thu, 3 Jan 2019 21:56:53 +0000 (21:56 +0000)]
USB: Add USB_QUIRK_DELAY_CTRL_MSG quirk for Corsair K70 RGB
commit
3483254b89438e60f719937376c5e0ce2bc46761 upstream.
To match the Corsair Strafe RGB, the Corsair K70 RGB also requires
USB_QUIRK_DELAY_CTRL_MSG to completely resolve boot connection issues
discussed here: https://github.com/ckb-next/ckb-next/issues/42.
Otherwise roughly 1 in 10 boots the keyboard will fail to be detected.
Patch that applied delay control quirk for Corsair Strafe RGB:
cb88a0588717 ("usb: quirks: add control message delay for 1b1c:1b20")
Previous K70 RGB patch to add delay-init quirk:
7a1646d92257 ("Add delay-init quirk for Corsair K70 RGB keyboards")
Signed-off-by: Jack Stocker <jackstocker.93@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icenowy Zheng [Thu, 3 Jan 2019 03:26:18 +0000 (11:26 +0800)]
USB: storage: add quirk for SMI SM3350
commit
0a99cc4b8ee83885ab9f097a3737d1ab28455ac0 upstream.
The SMI SM3350 USB-UFS bridge controller cannot handle long sense request
correctly and will make the chip refuse to do read/write when requested
long sense.
Add a bad sense quirk for it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Icenowy Zheng [Thu, 3 Jan 2019 03:26:17 +0000 (11:26 +0800)]
USB: storage: don't insert sane sense for SPC3+ when bad sense specified
commit
c5603d2fdb424849360fe7e3f8c1befc97571b8c upstream.
Currently the code will set US_FL_SANE_SENSE flag unconditionally if
device claims SPC3+, however we should allow US_FL_BAD_SENSE flag to
prevent this behavior, because SMI SM3350 UFS-USB bridge controller,
which claims SPC4, will show strange behavior with 96-byte sense
(put the chip into a wrong state that cannot read/write anything).
Check the presence of US_FL_BAD_SENSE when assuming US_FL_SANE_SENSE on
SPC4+ devices.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Daniele Palmas [Fri, 28 Dec 2018 15:15:41 +0000 (16:15 +0100)]
usb: cdc-acm: send ZLP for Telit 3G Intel based modems
commit
34aabf918717dd14e05051896aaecd3b16b53d95 upstream.
Telit 3G Intel based modems require zero packet to be sent if
out data size is equal to the endpoint max packet size.
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ross Lagerwall [Tue, 8 Jan 2019 18:30:57 +0000 (18:30 +0000)]
cifs: Fix potential OOB access of lock element array
commit
b9a74cde94957d82003fb9f7ab4777938ca851cd upstream.
If maxBuf is small but non-zero, it could result in a zero sized lock
element array which we would then try and access OOB.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Sat, 22 Dec 2018 20:40:05 +0000 (12:40 -0800)]
CIFS: Fix credit computation for compounded requests
commit
8544f4aa9dd19a04d1244dae10feecc813ccf175 upstream.
In SMB3 protocol every part of the compound chain consumes credits
individually, so we need to call wait_for_free_credits() for each
of the PDUs in the chain. If an operation is interrupted, we must
ensure we return all credits taken from the server structure back.
Without this patch server can sometimes disconnect the session
due to credit mismatches, especially when first operation(s)
are large writes.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Thu, 10 Jan 2019 19:27:28 +0000 (11:27 -0800)]
CIFS: Do not hide EINTR after sending network packets
commit
ee13919c2e8d1f904e035ad4b4239029a8994131 upstream.
Currently we hide EINTR code returned from sock_sendmsg()
and return 0 instead. This makes a caller think that we
successfully completed the network operation which is not
true. Fix this by properly returning EINTR to callers.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Fri, 4 Jan 2019 00:45:13 +0000 (16:45 -0800)]
CIFS: Do not set credits to 1 if the server didn't grant anything
commit
33fa5c8b8a7dbe6353a56eaa654b790348890d42 upstream.
Currently we reset the number of total credits granted by the server
to 1 if the server didn't grant us anything int the response. This
violates the SMB3 protocol - we need to trust the server and use
the credit values from the response. Fix this by removing the
corresponding code.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pavel Shilovsky [Wed, 19 Dec 2018 22:49:09 +0000 (22:49 +0000)]
CIFS: Fix adjustment of credits for MTU requests
commit
b983f7e92348d7e7d091db1b78b7915e9dd3d63a upstream.
Currently for MTU requests we allocate maximum possible credits
in advance and then adjust them according to the request size.
While we were adjusting the number of credits belonging to the
server, we were skipping adjustment of credits belonging to the
request. This patch fixes it by setting request credits to
CreditCharge field value of SMB2 packet header.
Also ask 1 credit more for async read and write operations to
increase parallelism and match the behavior of other operations.
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 9 Jan 2019 09:05:24 +0000 (17:05 +0800)]
ALSA: hda/realtek - Disable headset Mic VREF for headset mode of ALC225
commit
d1dd42110d2727e81b9265841a62bc84c454c3a2 upstream.
Disable Headset Mic VREF for headset mode of ALC225.
This will be controlled by coef bits of headset mode functions.
[ Fixed a compile warning and code simplification -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Wed, 9 Jan 2019 08:23:37 +0000 (16:23 +0800)]
ALSA: hda/realtek - Add unplug function into unplug state of Headset Mode for ALC225
commit
4d4b0c52bde470c379f5d168d5c139ad866cb808 upstream.
Forgot to add unplug function to unplug state of headset mode
for ALC225.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kailang Yang [Thu, 3 Jan 2019 07:53:39 +0000 (15:53 +0800)]
ALSA: hda/realtek - Support Dell headset mode for New AIO platform
commit
c2a7c55a04065c3b0c32d23b099db7ea1dbf6250 upstream.
Dell has new platform for ALC274.
This will support to enable headset mode.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
WANG Chao [Mon, 10 Dec 2018 16:37:25 +0000 (00:37 +0800)]
x86, modpost: Replace last remnants of RETPOLINE with CONFIG_RETPOLINE
commit
e4f358916d528d479c3c12bd2fd03f2d5a576380 upstream.
Commit
4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
replaced the RETPOLINE define with CONFIG_RETPOLINE checks. Remove the
remaining pieces.
[ bp: Massage commit message. ]
Fixes:
4cd24de3a098 ("x86/retpoline: Make CONFIG_RETPOLINE depend on compiler support")
Signed-off-by: WANG Chao <chao.wang@ucloud.cn>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Kees Cook <keescook@chromium.org>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-kbuild@vger.kernel.org
Cc: srinivas.eeda@oracle.com
Cc: stable <stable@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181210163725.95977-1-chao.wang@ucloud.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Quentin Perret [Wed, 9 Jan 2019 10:42:36 +0000 (10:42 +0000)]
cpufreq: scmi: Fix frequency invariance in slow path
commit
0e141d1c65c1dd31c914eb2e11651adcc1a15912 upstream.
The scmi-cpufreq driver calls the arch_set_freq_scale() callback on
frequency changes to provide scale-invariant load-tracking signals to
the scheduler. However, in the slow path, it does so while specifying
the current and max frequencies in different units, hence resulting in a
broken freq_scale factor.
Fix this by passing all frequencies in KHz, as stored in the CPUFreq
frequency table.
Fixes:
99d6bdf33877 (cpufreq: add support for CPU DVFS based on SCMI message protocol)
Signed-off-by: Quentin Perret <quentin.perret@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: 4.17+ <stable@vger.kernel.org> # v4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 3 Jan 2019 02:12:47 +0000 (20:12 -0600)]
staging: rtl8188eu: Fix module loading from tasklet for WEP encryption
commit
7775665aadc48a562051834a73519129bf717d73 upstream.
Commit
2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames")
causes scheduling while atomic bugs followed by a hard freeze whenever
the driver tries to connect to a WEP-encrypted network. Experimentation
showed that the freezes were eliminated when module lib80211 was
preloaded, which can be forced by calling lib80211_get_crypto_ops()
directly rather than indirectly through try_then_request_module().
With this change, no BUG messages are logged.
Fixes:
2b2ea09e74a5 ("staging:r8188eu: Use lib80211 to decrypt WEP-frames")
Cc: Stable <stable@vger.kernel.org> # v4.17+
Cc: Michael Straube <straube.linux@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 3 Jan 2019 02:12:46 +0000 (20:12 -0600)]
staging: rtl8188eu: Fix module loading from tasklet for CCMP encryption
commit
84cad97a717f5749a0236abd5ce68da582ea074f upstream.
Commit
6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt")
causes scheduling while atomic bugs followed by a hard freeze whenever
the driver tries to connect to a CCMP-encrypted network. Experimentation
showed that the freezes were eliminated when module lib80211 was
preloaded, which can be forced by calling lib80211_get_crypto_ops()
directly rather than indirectly through try_then_request_module().
With this change, no BUG messages are logged.
Fixes:
6bd082af7e36 ("staging:r8188eu: use lib80211 CCMP decrypt")
Cc: Stable <stable@vger.kernel.org> # v4.17+
Reported-and-tested-by: Michael Straube <straube.linux@gmail.com>
Cc: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Filipe Manana [Tue, 8 Jan 2019 11:44:41 +0000 (11:44 +0000)]
Btrfs: fix deadlock when using free space tree due to block group creation
commit
a6d8654d885d7d79a3fb82da64eaa489ca332a82 upstream.
When modifying the free space tree we can end up COWing one of its extent
buffers which in turn might result in allocating a new chunk, which in
turn can result in flushing (finish creation) of pending block groups. If
that happens we can deadlock because creating a pending block group needs
to update the free space tree, and if any of the updates tries to modify
the same extent buffer that we are COWing, we end up in a deadlock since
we try to write lock twice the same extent buffer.
So fix this by skipping pending block group creation if we are COWing an
extent buffer from the free space tree. This is a case missed by commit
5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches").
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=202173
Fixes:
5ce555578e091 ("Btrfs: fix deadlock when writing out free space caches")
CC: stable@vger.kernel.org # 4.18+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg Kroah-Hartman [Sun, 13 Jan 2019 08:51:11 +0000 (09:51 +0100)]
Linux 4.19.15
Ivan Mironov [Mon, 24 Dec 2018 15:13:05 +0000 (20:13 +0500)]
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
commit
38355a5f9a22bfa5bd5b1bb79805aca39fa53729 upstream.
This happened when I tried to boot normal Fedora 29 system with latest
available kernel (from fedora rawhide, plus some unrelated custom
patches):
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
PGD 0 P4D 0
Oops: 0010 [#1] SMP PTI
CPU: 6 PID: 1422 Comm: libvirtd Tainted: G I 4.20.0-0.rc7.git3.hpsa2.1.fc29.x86_64 #1
Hardware name: HP ProLiant BL460c G6, BIOS I24 05/21/2018
RIP: 0010: (null)
Code: Bad RIP value.
RSP: 0018:
ffffa47ccdc9fbe0 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
00000000000003e8 RCX:
ffffa47ccdc9fbf8
RDX:
ffffa47ccdc9fc00 RSI:
ffff97d9ee7b01f8 RDI:
ffff97d9f0150b80
RBP:
ffff97d9f0150b80 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000000 R12:
0000000000000003
R13:
ffff97d9ef1e53e8 R14:
0000000000000009 R15:
ffff97d9f0ac6730
FS:
00007f4d224ef700(0000) GS:
ffff97d9fa200000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
ffffffffffffffd6 CR3:
00000011ece52006 CR4:
00000000000206e0
Call Trace:
? bnx2x_chip_cleanup+0x195/0x610 [bnx2x]
? bnx2x_nic_unload+0x1e2/0x8f0 [bnx2x]
? bnx2x_reload_if_running+0x24/0x40 [bnx2x]
? bnx2x_set_features+0x79/0xa0 [bnx2x]
? __netdev_update_features+0x244/0x9e0
? netlink_broadcast_filtered+0x136/0x4b0
? netdev_update_features+0x22/0x60
? dev_disable_lro+0x1c/0xe0
? devinet_sysctl_forward+0x1c6/0x211
? proc_sys_call_handler+0xab/0x100
? __vfs_write+0x36/0x1a0
? rcu_read_lock_sched_held+0x79/0x80
? rcu_sync_lockdep_assert+0x2e/0x60
? __sb_start_write+0x14c/0x1b0
? vfs_write+0x159/0x1c0
? vfs_write+0xba/0x1c0
? ksys_write+0x52/0xc0
? do_syscall_64+0x60/0x1f0
? entry_SYSCALL_64_after_hwframe+0x49/0xbe
After some investigation I figured out that recently added cleanup code
tries to call VLAN filtering de-initialization function which exist only
for newer hardware. Corresponding function pointer is not
set (== 0) for older hardware, namely these chips:
#define CHIP_NUM_57710 0x164e
#define CHIP_NUM_57711 0x164f
#define CHIP_NUM_57711E 0x1650
And I have one of those in my test system:
Broadcom Inc. and subsidiaries NetXtreme II BCM57711E 10-Gigabit PCIe [14e4:1650]
Function bnx2x_init_vlan_mac_fp_objs() from
drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h decides whether to
initialize relevant pointers in bnx2x_sp_objs.vlan_obj or not.
This regression was introduced after v4.20-rc7, and still exists in v4.20
release.
Fixes:
04f05230c5c13 ("bnx2x: Remove configured vlans as part of unload sequence.")
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Signed-off-by: Ivan Mironov <mironov.ivan@gmail.com>
Acked-by: Sudarsana Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nicholas Kazlauskas [Wed, 28 Nov 2018 21:17:50 +0000 (16:17 -0500)]
drm/amd/display: Fix unintialized max_bpc state values
commit
49f1c44b581b08e3289127ffe58bd208c3166701 upstream.
[Why]
If the "max bpc" isn't explicitly set in the atomic state then it
have a value of 0. This has the correct behavior of limiting a panel
to 8bpc in the case where the panel supports 8bpc. In the case of eDP
panels this isn't a true assumption - there are panels that can only
do 6bpc.
Banding occurs for these displays.
[How]
Initialize the max_bpc when the connector resets to 8bpc. Also carry
over the value when the state is duplicated.
Bugzilla: https://bugs.freedesktop.org/108825
Fixes:
307638884f72 ("drm/amd/display: Support amdgpu "max bpc" connector property")
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Enric Balletbo i Serra [Sat, 13 Oct 2018 10:56:54 +0000 (12:56 +0200)]
drm/rockchip: psr: do not dereference encoder before it is null checked.
commit
4eda776c3cefcb1f01b2d85bd8753f67606282b5 upstream.
'encoder' is dereferenced before it is null sanity checked, hence we
potentially have a null pointer dereference bug. Instead, initialise
drm_drv from encoder->dev->dev_private after we are sure 'encoder' is
not null.
Fixes:
5182c1a556d7f ("drm/rockchip: add an common abstracted PSR driver")
Cc: stable@vger.kernel.org
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20181013105654.11827-1-enric.balletbo@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Boris Brezillon [Tue, 9 Oct 2018 13:24:46 +0000 (15:24 +0200)]
drm/vc4: Set ->is_yuv to false when num_planes == 1
commit
2b02a05bdc3a62d36e0d0b015351897109e25991 upstream.
When vc4_plane_state is duplicated ->is_yuv is left assigned to its
previous value, and we never set it back to false when switching to
a non-YUV format.
Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch
of the vc4_plane_setup_clipping_and_scaling() function.
Fixes:
fc04023fafecf ("drm/vc4: Add support for YUV planes.")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lyude Paul [Thu, 15 Nov 2018 01:39:51 +0000 (20:39 -0500)]
drm/nouveau/drm/nouveau: Check rc from drm_dp_mst_topology_mgr_resume()
commit
b89fdf7ae8500feae1100d8b283176a44d31d698 upstream.
We need to actually make sure we check this on resume since otherwise we
won't know whether or not the topology is still there once we've
resumed, which will cause us to still think the topology is connected
even after it's been removed if the removal happens mid-suspend.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Christophe Leroy [Mon, 10 Dec 2018 08:08:28 +0000 (08:08 +0000)]
lib: fix build failure in CONFIG_DEBUG_VIRTUAL test
commit
10fdf838e5f540beca466e9d1325999c072e5d3f upstream.
On several arches, virt_to_phys() is in io.h
Build fails without it:
CC lib/test_debug_virtual.o
lib/test_debug_virtual.c: In function 'test_debug_virtual_init':
lib/test_debug_virtual.c:26:7: error: implicit declaration of function 'virt_to_phys' [-Werror=implicit-function-declaration]
pa = virt_to_phys(va);
^
Fixes:
e4dace361552 ("lib: add test module for CONFIG_DEBUG_VIRTUAL")
CC: stable@vger.kernel.org
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Rowand [Tue, 18 Dec 2018 19:40:03 +0000 (11:40 -0800)]
of: __of_detach_node() - remove node from phandle cache
commit
5801169a2ed20003f771acecf3ac00574cf10a38 upstream.
Non-overlay dynamic devicetree node removal may leave the node in
the phandle cache. Subsequent calls to of_find_node_by_phandle()
will incorrectly find the stale entry. Remove the node from the
cache.
Add paranoia checks in of_find_node_by_phandle() as a second level
of defense (do not return cached node if detached, do not add node
to cache if detached).
Fixes:
0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Reported-by: Michael Bringmann <mwb@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frank Rowand [Tue, 18 Dec 2018 19:40:02 +0000 (11:40 -0800)]
of: of_node_get()/of_node_put() nodes held in phandle cache
commit
b8a9ac1a5b99a2fcbed19fd29d2d59270c281a31 upstream.
The phandle cache contains struct device_node pointers. The refcount
of the pointers was not incremented while in the cache, allowing use
after free error after kfree() of the node. Add the proper increment
and decrement of the use count.
Fixes:
0b3ce78e90fc ("of: cache phandle nodes to reduce cost of of_find_node_by_phandle()")
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lubomir Rintel [Fri, 16 Nov 2018 16:23:47 +0000 (17:23 +0100)]
power: supply: olpc_battery: correct the temperature units
commit
ed54ffbe554f0902689fd6d1712bbacbacd11376 upstream.
According to [1] and [2], the temperature values are in tenths of degree
Celsius. Exposing the Celsius value makes the battery appear on fire:
$ upower -i /org/freedesktop/UPower/devices/battery_olpc_battery
...
temperature: 236.9 degrees C
Tested on OLPC XO-1 and OLPC XO-1.75 laptops.
[1] include/linux/power_supply.h
[2] Documentation/power/power_supply_class.txt
Fixes:
fb972873a767 ("[BATTERY] One Laptop Per Child power/battery driver")
Cc: stable@vger.kernel.org
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alexander Shishkin [Wed, 19 Dec 2018 15:19:22 +0000 (17:19 +0200)]
intel_th: msu: Fix an off-by-one in attribute store
commit
ec5b5ad6e272d8d6b92d1007f79574919862a2d2 upstream.
The 'nr_pages' attribute of the 'msc' subdevices parses a comma-separated
list of window sizes, passed from userspace. However, there is a bug in
the string parsing logic wherein it doesn't exclude the comma character
from the range of characters as it consumes them. This leads to an
out-of-bounds access given a sufficiently long list. For example:
> # echo 8,8,8,8 > /sys/bus/intel_th/devices/0-msc0/nr_pages
> ==================================================================
> BUG: KASAN: slab-out-of-bounds in memchr+0x1e/0x40
> Read of size 1 at addr
ffff8803ffcebcd1 by task sh/825
>
> CPU: 3 PID: 825 Comm: npktest.sh Tainted: G W 4.20.0-rc1+
> Call Trace:
> dump_stack+0x7c/0xc0
> print_address_description+0x6c/0x23c
> ? memchr+0x1e/0x40
> kasan_report.cold.5+0x241/0x308
> memchr+0x1e/0x40
> nr_pages_store+0x203/0xd00 [intel_th_msu]
Fix this by accounting for the comma character.
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Fixes:
ba82664c134ef ("intel_th: Add Memory Storage Unit driver")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / platform / kernel / linux-rpi.git / log