media: am437x: fix pm_runtime_get_sync() usage count

[ Upstream commit c41e02493334985cca1a22efd5ca962ce3abb061 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, ensure that the driver will check if PM runtime
resumed at vpfe_initialize_device().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: s5p: fix pm_runtime_get_sync() usage count

[ Upstream commit fdc34e82c0f968ac4c157bd3d8c299ebc24c9c63 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: mdk-mdp: fix pm_runtime_get_sync() usage count

[ Upstream commit d07bb9702cf5f5ccf3fb661e6cab54bbc33cd23f ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: marvel-ccic: fix some issues when getting pm_runtime

[ Upstream commit e7c617cab7a522fba5b20f9033ee98565b6f3546 ]

Calling pm_runtime_get_sync() is bad, since even when it
returns an error, pm_runtime_put*() should be called.
So, use instead pm_runtime_resume_and_get().

While here, ensure that the error condition will be checked
during clock enable an media open() calls.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

staging: media: rkvdec: fix pm_runtime_get_sync() usage count

[ Upstream commit e90812c47b958407b54d05780dc483fdc1b57a93 ]

The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.

Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Add a reference to ucounts for each cred

[ Upstream commit 905ae01c4ae2ae3df05bb141801b1db4b7d83c61 ]

For RLIMIT_NPROC and some other rlimits the user_struct that holds the
global limit is kept alive for the lifetime of a process by keeping it
in struct cred. Adding a pointer to ucounts in the struct cred will
allow to track RLIMIT_NPROC not only for user in the system, but for
user in the user_namespace.

Updating ucounts may require memory allocation which may fail. So, we
cannot change cred.ucounts in the commit_creds() because this function
cannot fail and it should always return 0. For this reason, we modify
cred.ucounts before calling the commit_creds().

Changelog

v6:
* Fix null-ptr-deref in is_ucounts_overlimit() detected by trinity. This
  error was caused by the fact that cred_alloc_blank() left the ucounts
  pointer empty.

Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Alexey Gladkov <legion@kernel.org>
Link: https://lkml.kernel.org/r/b37aaef28d8b9b0d757e07ba6dd27281bbe39259.1619094428.git.legion@kernel.org
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: Make of_register_spi_device also set the fwnode

[ Upstream commit 0e793ba77c18382f08e440260fe72bc6fce2a3cb ]

Currently, the SPI core doesn't set the struct device fwnode pointer
when it creates a new SPI device. This means when the device is
registered the fwnode is NULL and the check in device_add which sets
the fwnode->dev pointer is skipped. This wasn't previously an issue,
however these two patches:

commit 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable
fw_devlink=on by default")
commit ced2af419528 ("gpiolib: Don't probe gpio_device if it's not the
primary device")

Added some code to the GPIO core which relies on using that
fwnode->dev pointer to determine if a driver is bound to the fwnode
and if not bind a stub GPIO driver. This means the GPIO providers
behind SPI will get both the expected driver and this stub driver
causing the stub driver to fail if it attempts to request any pin
configuration. For example on my system:

madera-pinctrl madera-pinctrl: pin gpio5 already requested by madera-pinctrl; cannot claim for gpiochip3
madera-pinctrl madera-pinctrl: pin-4 (gpiochip3) status -22
madera-pinctrl madera-pinctrl: could not request pin 4 (gpio5) from group aif1  on device madera-pinctrl
gpio_stub_drv gpiochip3: Error applying setting, reverse things back
gpio_stub_drv: probe of gpiochip3 failed with error -22

The firmware node on the device created by the GPIO framework is set
through the of_node pointer hence things generally actually work,
however that fwnode->dev is never set, as the check was skipped at
device_add time. This fix appears to match how the I2C subsystem
handles the same situation.

Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210421101402.8468-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

thermal/cpufreq_cooling: Update offline CPUs per-cpu thermal_pressure

[ Upstream commit 2ad8ccc17d1e4270cf65a3f2a07a7534aa23e3fb ]

The thermal pressure signal gives information to the scheduler about
reduced CPU capacity due to thermal. It is based on a value stored in
a per-cpu 'thermal_pressure' variable. The online CPUs will get the
new value there, while the offline won't. Unfortunately, when the CPU
is back online, the value read from per-cpu variable might be wrong
(stale data).  This might affect the scheduler decisions, since it
sees the CPU capacity differently than what is actually available.

Fix it by making sure that all online+offline CPUs would get the
proper value in their per-cpu variable when thermal framework sets
capping.

Fixes: f12e4f66ab6a3 ("thermal/cpu-cooling: Update thermal pressure in case of a maximum frequency capping")
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20210614191030.22241-1-lukasz.luba@arm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

fuse: reject internal errno

commit 49221cf86d18bb66fe95d3338cb33bd4b9880ca5 upstream.

Don't allow userspace to report errors that could be kernel-internal.

Reported-by: Anatoly Trosinenko <anatoly.trosinenko@gmail.com>
Fixes: 334f485df85a ("[PATCH] FUSE - device functions")
Cc: <stable@vger.kernel.org> # v2.6.14
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: check connected before queueing on fpq->io

commit 80ef08670d4c28a06a3de954bd350368780bcfef upstream.

A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:

Thread-1   Thread-2
========   ========
->fuse_simple_request()           ->shutdown
  ->__fuse_request_send()
    ->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read()                ->acquire(fpq->lock)
  ->wait_for(fpq->lock)    ->set err to all req's in fpq->io
  ->release(fpq->lock)
  ->acquire(fpq->lock)
  ->add req to fpq->io

After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized.  Also the copy might block
despite being already aborted.

Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.

Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: ignore PG_workingset after stealing

commit b89ecd60d38ec042d63bdb376c722a16f92bcb88 upstream.

Fix the "fuse: trying to steal weird page" warning.

Description from Johannes Weiner:

  "Think of it as similar to PG_active. It's just another usage/heat
   indicator of file and anon pages on the reclaim LRU that, unlike
   PG_active, persists across deactivation and even reclaim (we store it in
   the page cache / swapper cache tree until the page refaults).

   So if fuse accepts pages that can legally have PG_active set,
   PG_workingset is fine too."

Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Fixes: 1899ad18c607 ("mm: workingset: tell cache transitions from workingset thrashing")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix infinite loop in sget_fc()

commit e4a9ccdd1c03b3dc58214874399d24331ea0a3ab upstream.

We don't set the SB_BORN flag on submounts. This is wrong as these
superblocks are then considered as partially constructed or dying
in the rest of the code and can break some assumptions.

One such case is when you have a virtiofs filesystem with submounts
and you try to mount it again : virtio_fs_get_tree() tries to obtain
a superblock with sget_fc(). The logic in sget_fc() is to loop until
it has either found an existing matching superblock with SB_BORN set
or to create a brand new one. It is assumed that a superblock without
SB_BORN is transient and the loop is restarted. Forgetting to set
SB_BORN on submounts hence causes sget_fc() to retry forever.

Setting SB_BORN requires special care, i.e. a write barrier for
super_cache_count() which can check SB_BORN without taking any lock.
We should call vfs_get_tree() to deal with that but this requires
to have a proper ->get_tree() implementation for submounts, which
is a bigger piece of work. Go for a simple bug fix in the meatime.

Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix crash if superblock of submount gets killed early

commit e3a43f2a95393000778f8f302d48795add2fc4a8 upstream.

As soon as fuse_dentry_automount() does up_write(&sb->s_umount), the
superblock can theoretically be killed. If this happens before the
submount was added to the &fc->mounts list, fuse_mount_remove() later
crashes in list_del_init() because it assumes the submount to be
already there.

Add the submount before dropping sb->s_umount to fix the inconsistency.
It is okay to nest fc->killsb under sb->s_umount, we already do this
on the ->kill_sb() path.

Signed-off-by: Greg Kurz <groug@kaod.org>
Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

fuse: Fix crash in fuse_dentry_automount() error path

commit d92d88f0568e97c437eeb79d9c9609bd8277406f upstream.

If fuse_fill_super_submount() returns an error, the error path
triggers a crash:

[   26.206673] BUG: kernel NULL pointer dereference, address: 0000000000000000
[...]
[   26.226362] RIP: 0010:__list_del_entry_valid+0x25/0x90
[...]
[   26.247938] Call Trace:
[   26.248300]  fuse_mount_remove+0x2c/0x70 [fuse]
[   26.248892]  virtio_kill_sb+0x22/0x160 [virtiofs]
[   26.249487]  deactivate_locked_super+0x36/0xa0
[   26.250077]  fuse_dentry_automount+0x178/0x1a0 [fuse]

The crash happens because fuse_mount_remove() assumes that the FUSE
mount was already added to list under the FUSE connection, but this
only done after fuse_fill_super_submount() has returned success.

This means that until fuse_fill_super_submount() has returned success,
the FUSE mount isn't actually owned by the superblock. We should thus
reclaim ownership by clearing sb->s_fs_info, which will skip the call
to fuse_mount_remove(), and perform rollback, like virtio_fs_get_tree()
already does for the root sb.

Fixes: bf109c64040f ("fuse: implement crossmounts")
Cc: stable@vger.kernel.org # v5.10+
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

evm: Refuse EVM_ALLOW_METADATA_WRITES only if an HMAC key is loaded

commit 9acc89d31f0c94c8e573ed61f3e4340bbd526d0c upstream.

EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
temporarily disable metadata verification until all xattrs/attrs necessary
to verify an EVM portable signature are copied to the file. This flag is
cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
calculated on unverified xattrs/attrs.

Currently EVM unnecessarily denies setting this flag if EVM is initialized
with a public key, which is not a concern as it cannot be used to trust
xattrs/attrs updates. This patch removes this limitation.

Fixes: ae1ba1676b88e ("EVM: Allow userland to permit modification of EVM-protected metadata")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.16.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

evm: Execute evm_inode_init_security() only when an HMAC key is loaded

commit 9eea2904292c2d8fa98df141d3bf7c41ec9dc1b5 upstream.

evm_inode_init_security() requires an HMAC key to calculate the HMAC on
initial xattrs provided by LSMs. However, it checks generically whether a
key has been loaded, including also public keys, which is not correct as
public keys are not suitable to calculate the HMAC.

Originally, support for signature verification was introduced to verify a
possibly immutable initial ram disk, when no new files are created, and to
switch to HMAC for the root filesystem. By that time, an HMAC key should
have been loaded and usable to calculate HMACs for new files.

More recently support for requiring an HMAC key was removed from the
kernel, so that signature verification can be used alone. Since this is a
legitimate use case, evm_inode_init_security() should not return an error
when no HMAC key has been loaded.

This patch fixes this problem by replacing the evm_key_loaded() check with
a check of the EVM_INIT_HMAC flag in evm_initialized.

Fixes: 26ddabfe96b ("evm: enable EVM when X509 certificate is loaded")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.5.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

loop: Fix missing discard support when using LOOP_CONFIGURE

commit 2b9ac22b12a266eb4fec246a07b504dd4983b16b upstream.

Without calling loop_config_discard() the discard flag and parameters
aren't set/updated for the loop device and worst-case they could
indicate discard support when it isn't the case (ex: if the
LOOP_SET_STATUS ioctl was used with a different file prior to
LOOP_CONFIGURE).

Cc: <stable@vger.kernel.org> # 5.8.x-
Fixes: 3448914e8cc5 ("loop: Add LOOP_CONFIGURE ioctl")
Signed-off-by: Kristian Klausen <kristian@klausen.dk>
Link: https://lore.kernel.org/r/20210618115157.31452-1-kristian@klausen.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

powerpc/stacktrace: Fix spurious "stale" traces in raise_backtrace_ipi()

commit 7c6986ade69e3c81bac831645bc72109cd798a80 upstream.

In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending
each an IPI asking them to do a backtrace, but we don't wait for the
backtrace to happen.

We then iterate through the CPU mask again, and if any CPU hasn't done
the backtrace and cleared itself from the mask, we print a trace on its
behalf, noting that the trace may be "stale".

This works well enough when a CPU is not responding, because in that
case it doesn't receive the IPI and the sending CPU is left to print the
trace. But when all CPUs are responding we are left with a race between
the sending and receiving CPUs, if the sending CPU wins the race then it
will erroneously print a trace.

This leads to spurious "stale" traces from the sending CPU, which can
then be interleaved messily with the receiving CPU, note the CPU
numbers, eg:

  [ 1658.929157][    C7] rcu: Stack dump where RCU GP kthread last ran:
  [ 1658.929223][    C7] Sending NMI from CPU 7 to CPUs 1:
  [ 1658.929303][    C1] NMI backtrace for cpu 1
  [ 1658.929303][    C7] CPU 1 didn't respond to backtrace IPI, inspecting paca.
  [ 1658.929362][    C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G        W   E     5.13.0-rc2+ #46
  [ 1658.929405][    C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H)
  [ 1658.929465][    C1] Workqueue: events_highpri test_work_fn [test_lockup]
  [ 1658.929549][    C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale):
  [ 1658.929592][    C1] NIP:  c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0

To fix it, change the logic so that the sending CPU waits 5s for the
receiving CPU to print its trace. If the receiving CPU prints its trace
successfully then the sending CPU just continues, avoiding any spurious
"stale" trace.

This has the added benefit of allowing all CPUs to print their traces in
order and avoids any interleaving of their output.

Fixes: 5cc05910f26e ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625140408.3351173-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

seq_buf: Make trace_seq_putmem_hex() support data longer than 8

commit 6a2cbc58d6c9d90cd74288cc497c2b45815bc064 upstream.

Since the raw memory 'data' does not go forward, it will dump repeated
data if the data length is more than 8. If we want to dump longer data
blocks, we need to repeatedly call macro SEQ_PUT_HEX_FIELD. I think it
is a bit redundant, and multiple function calls also affect the performance.

Link: https://lore.kernel.org/lkml/20210625122453.5e2fe304@oasis.local.home/
Link: https://lkml.kernel.org/r/20210626032156.47889-2-yun.zhou@windriver.com
Cc: stable@vger.kernel.org
Fixes: 6d2289f3faa7 ("tracing: Make trace_seq_putmem_hex() more robust")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracepoint: Add tracepoint_probe_register_may_exist() for BPF tracing

commit 9913d5745bd720c4266805c8d29952a3702e4eca upstream.

All internal use cases for tracepoint_probe_register() is set to not ever
be called with the same function and data. If it is, it is considered a
bug, as that means the accounting of handling tracepoints is corrupted.
If the function and data for a tracepoint is already registered when
tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and
return with EEXISTS.

The BPF system call can end up calling tracepoint_probe_register() with
the same data, which now means that this can trigger the warning because
of a user space process. As WARN_ON_ONCE() should not be called because
user space called a system call with bad data, there needs to be a way to
register a tracepoint without triggering a warning.

Enter tracepoint_probe_register_may_exist(), which can be called, but will
not cause a WARN_ON() if the probe already exists. It will still error out
with EEXIST, which will then be sent to the user space that performed the
BPF system call.

This keeps the previous testing for issues with other users of the
tracepoint code, while letting BPF call it with duplicated data and not
warn about it.

Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/
Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153
Cc: stable@vger.kernel.org
Fixes: c4f6699dfcb85 ("bpf: introduce BPF_RAW_TRACEPOINT")
Reported-by: syzbot <syzbot+721aa903751db87aa244@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+721aa903751db87aa244@syzkaller.appspotmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

tracing/histograms: Fix parsing of "sym-offset" modifier

commit 26c563731056c3ee66f91106c3078a8c36bb7a9e upstream.

With the addition of simple mathematical operations (plus and minus), the
parsing of the "sym-offset" modifier broke, as it took the '-' part of the
"sym-offset" as a minus, and tried to break it up into a mathematical
operation of "field.sym - offset", in which case it failed to parse
(unless the event had a field called "offset").

Both .sym and .sym-offset modifiers should not be entered into
mathematical calculations anyway. If ".sym-offset" is found in the
modifier, then simply make it not an operation that can be calculated on.

Link: https://lkml.kernel.org/r/20210707110821.188ae255@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: fix AP mode with WPA failure due to encrypted EAPOL

commit 314538041b5632ffaf64798faaeabaf2793fe029 upstream.

In AP mode WPA2-PSK connections were not established.

The reason was that the AP was sending the first message
of the 4 way handshake encrypted, even though no pairwise
key had (correctly) yet been set.

Encryption was enabled if the "security_enable" driver flag
was set and encryption was not explicitly disabled by
IEEE80211_TX_INTFL_DONT_ENCRYPT.

However security_enable was set when *any* key, including
the AP GTK key, had been set which was causing unwanted
encryption even if no key was avaialble for the unicast
packet to be sent.

Fix this by adding a check that we have a key and drop
the old security_enable driver flag which is insufficient
and redundant.

The Redpine downstream out of tree driver does it this way too.

Regarding the Fixes tag the actual code being modified was
introduced earlier, with the original driver submission, in
dad0d04fa7ba ("rsi: Add RS9113 wireless driver"), however
at that time AP mode was not yet supported so there was
no bug at that point.

So I have tagged the introduction of AP support instead
which was part of the patch set "rsi: support for AP mode" [1]

It is not clear whether AP WPA has ever worked, I can see nothing
on the kernel side that broke it afterwards yet the AP support
patch series says "Tests are performed to confirm aggregation,
connections in WEP and WPA/WPA2 security."

One possibility is that the initial tests were done with a modified
userspace (hostapd).

[1] https://www.spinics.net/lists/linux-wireless/msg165302.html

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: 38ef62353acb ("rsi: security enhancements for AP mode")
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1622564459-24430-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rsi: Assign beacon rate settings to the correct rate_info descriptor field

commit b1c3a24897bd528f2f4fda9fea7da08a84ae25b6 upstream.

The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info
field. The rest of the driver does it correctly, except this one place,
so fix it. This is also aligned with the RSI downstream vendor driver.
Without this patch, an AP operating at 5 GHz does not transmit any
beacons at all, this patch fixes that.

Fixes: d26a9559403c ("rsi: add beacon changes for AP mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210507213105.140138-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ssb: sdio: Don't overwrite const buffer if block_write fails

commit 47ec636f7a25aa2549e198c48ecb6b1c25d05456 upstream.

It doesn't make sense to clobber the const driver-side buffer, if a
write-to-device attempt failed. All other SSB variants (PCI, PCMCIA and SoC)
also don't corrupt the buffer on any failure in block_write.
Therefore, remove this memset from the SDIO variant.

Signed-off-by: Michael Büsch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515210252.318be2ba@wiggum
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ath9k: Fix kernel NULL pointer dereference during ath_reset_internal()

commit fb312ac5ccb007e843f982b38d4d6886ba4b32f2 upstream.

I got this crash more times during debugging of PCIe controller and crash
happens somehow at the time when PCIe kernel code started link retraining (as
part of ASPM code) when at the same time PCIe link went down and ath9k probably
executed hw reset procedure.

Currently I'm not able to reproduce this issue as it looks like to be
some race condition between link training, ASPM, link down and reset
path. And as always, race conditions which depends on more input
parameters are hard to reproduce as it depends on precise timings.

But it is clear that pointers are zero in this case and should be
properly filled as same code pattern is used in ath9k_stop() function.
Anyway I was able to reproduce this crash by manually triggering ath
reset worker prior putting card up. I created simple patch to export
reset functionality via debugfs and use it to "simulate" of triggering
reset.    s proved that NULL-pointer dereference issue is there.

Function ath9k_hw_reset() is dereferencing chan structure pointer, so it
needs to be non-NULL pointer.

Function ath9k_stop() already contains code which sets ah->curchan to valid
non-NULL pointer prior calling ath9k_hw_reset() function.

Add same code pattern also into ath_reset_internal() function to prevent
kernel NULL pointer dereference in ath9k_hw_reset() function.

This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which
is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL
chan structure.

    [   45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
    [   45.344417] Mem abort info:
    [   45.347301]   ESR = 0x96000005
    [   45.350448]   EC = 0x25: DABT (current EL), IL = 32 bits
    [   45.356166]   SET = 0, FnV = 0
    [   45.359350]   EA = 0, S1PTW = 0
    [   45.362596] Data abort info:
    [   45.365756]   ISV = 0, ISS = 0x00000005
    [   45.369735]   CM = 0, WnR = 0
    [   45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000
    [   45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
    [   45.388856] Internal error: Oops: 96000005 [#1] SMP
    [   45.393897] Modules linked in: ath9k ath9k_common ath9k_hw
    [   45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785
    [   45.414746] Workqueue: phy0 ath_reset_work [ath9k]
    [   45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
    [   45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw]
    [   45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw]
    [   45.436548] sp : ffffffc0118dbca0
    [   45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000
    [   45.445442] x27: ffffff800dee4080 x26: 0000000000000000
    [   45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000
    [   45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408
    [   45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8
    [   45.467366] x19: 0000000000000000 x18: 0000000000000000
    [   45.472846] x17: 0000000000000000 x16: 0000000000000000
    [   45.478326] x15: 0000000000000010 x14: ffffffffffffffff
    [   45.483807] x13: ffffffc0918db94f x12: ffffffc011498720
    [   45.489289] x11: 0000000000000003 x10: ffffffc0114806e0
    [   45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8
    [   45.500251] x7 : c0000000ffffefff x6 : 0000000000000001
    [   45.505733] x5 : 0000000000000000 x4 : 0000000000000000
    [   45.511213] x3 : 0000000000000000 x2 : ffffff801fece870
    [   45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f
    [   45.522174] Call trace:
    [   45.524695]  ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw]
    [   45.529653]  ath_reset_internal+0x1a8/0x2b8 [ath9k]
    [   45.534696]  ath_reset_work+0x2c/0x40 [ath9k]
    [   45.539198]  process_one_work+0x210/0x480
    [   45.543339]  worker_thread+0x5c/0x510
    [   45.547115]  kthread+0x12c/0x130
    [   45.550445]  ret_from_fork+0x10/0x1c
    [   45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61)
    [   45.560430] ---[ end trace 566410ba90b50e8b ]---
    [   45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt
    [   45.572282] SMP: stopping secondary CPUs
    [   45.576331] Kernel Offset: disabled
    [   45.579924] CPU features: 0x00040002,0000200c
    [   45.584416] Memory Limit: none
    [   45.587564] Rebooting in 3 seconds..

Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial_cs: remove wrong GLOBETROTTER.cis entry

commit 11b1d881a90fc184cc7d06e9804eb288c24a2a0d upstream.

The GLOBETROTTER.cis entry in serial_cs matches more devices than
intended and breaks them. Remove it.

Example: # pccardctl info
PRODID_1="Option International
"
PRODID_2="GSM-Ready 56K/ISDN
"
PRODID_3="021
"
PRODID_4="A
"
MANFID=0013,0000
FUNCID=0

result:
pcmcia 0.0: Direct firmware load for cis/GLOBETROTTER.cis failed with error -2

The GLOBETROTTER.cis is nowhere to be found. There's GLOBETROTTER.cis.ihex at
https://netdev.vger.kernel.narkive.com/h4inqdxM/patch-axnet-cs-fix-phy-id-detection-for-bogus-asix-chip#post41
It's from completely diffetent card:
vers_1 4.1, "Option International", "GSM/GPRS GlobeTrotter", "001", "A"

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial_cs: Add Option International GSM-Ready 56K/ISDN modem

commit d495dd743d5ecd47288156e25c4d9163294a0992 upstream.

Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem
card.

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: sh-sci: Stop dmaengine transfer in sci_stop_tx()

commit 08a84410a04f05c7c1b8e833f552416d8eb9f6fe upstream.

Stop dmaengine transfer in sci_stop_tx(). Otherwise, the following
message is possible output when system enters suspend and while
transferring data, because clearing TIE bit in SCSCR is not able to
stop any dmaengine transfer.

    sh-sci e6550000.serial: ttySC1: Unable to drain transmitter

Note that this driver has already used some #ifdef in the .c file
so that this patch also uses #ifdef to fix the issue. Otherwise,
build errors happens if the CONFIG_SERIAL_SH_SCI_DMA is disabled.

Fixes: 73a19e4c0301 ("serial: sh-sci: Add DMA support.")
Cc: <stable@vger.kernel.org> # v4.9+
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20210610110806.277932-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

serial: mvebu-uart: fix calculation of clock divisor

commit 9078204ca5c33ba20443a8623a41a68a9995a70d upstream.

The clock divisor should be rounded to the closest value.

Signed-off-by: Pali Rohár <pali@kernel.org>
Fixes: 68a0db1d7da2 ("serial: mvebu-uart: add function to change baudrate")
Cc: stable@vger.kernel.org # 0e4cf69ede87 ("serial: mvebu-uart: clarify the baud rate derivation")
Link: https://lore.kernel.org/r/20210624224909.6350-2-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: accel: bma180: Fix BMA25x bandwidth register values

commit 8090d67421ddab0ae932abab5a60200598bf0bbb upstream.

According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:

  "Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
   It is recommended [...] to use the range from ´01000b´ to ´01111b´
   only in order to be compatible with future products."

However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.

Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.

[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24cc0 ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltr501: ltr501_read_ps(): add missing endianness conversion

commit 71b33f6f93ef9462c84560e2236ed22209d26a58 upstream.

The PS ADC Channel data is spread over 2 registers in little-endian
form. This patch adds the missing endianness conversion.

Fixes: 2690be905123 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Signed-off-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-4-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR

commit 421a26f3d7a7c3ca43f3a9dc0f3cb0f562d5bd95 upstream.

The ltr559 chip uses only the lowest bit of the ALS_CONTR register to
configure between active and stand-by mode. In the original driver
BIT(1) is used, which does a software reset instead.

This patch fixes the problem by using BIT(0) as als_mode_active for
the ltr559 chip.

Fixes: 8592a7eefa54 ("iio: ltr501: Add support for ltr559 chip")
Signed-off-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-3-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too

commit 2ac0b029a04b673ce83b5089368f467c5dca720c upstream.

The regmap is configured for 8 bit registers, uses a RB-Tree cache and
marks several registers as volatile (i.e. do not cache).

The ALS and PS data registers in the chip are 16 bit wide and spans
two regmap registers. In the current driver only the base register is
marked as volatile, resulting in the upper register only read once.

Further the data sheet notes:

| When the I2C read operation starts, all four ALS data registers are
| locked until the I2C read operation of register 0x8B is completed.

Which results in the registers never update after the 2nd read.

This patch fixes the problem by marking the upper 8 bits of the ALS
and PS registers as volatile, too.

Fixes: 2f2c96338afc ("iio: ltr501: Add regmap support.")
Reported-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-2-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: light: tcs3472: do not free unallocated IRQ

commit 7cd04c863f9e1655d607705455e7714f24451984 upstream.

Allocating an IRQ is conditional to the IRQ existence, but freeing it
was not. If no IRQ was allocate, the driver would still try to free
IRQ 0. Add the missing checks.

This fixes the following trace when the driver is removed:

[  100.667788] Trying to free already-free IRQ 0
[  100.667793] WARNING: CPU: 0 PID: 2315 at kernel/irq/manage.c:1826 free_irq+0x1fd/0x370
...
[  100.667914] Call Trace:
[  100.667920]  tcs3472_remove+0x3a/0x90 [tcs3472]
[  100.667927]  i2c_device_remove+0x2b/0xa0

Signed-off-by: frank zago <frank@zago.net>
Link: https://lore.kernel.org/r/20210427022017.19314-2-frank@zago.net
Fixes: 9d2f715d592e ("iio: light: tcs3472: support out-of-threshold events")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()

commit c8cc4cf60b000fb9f4b29bed131fb6cf1fe42d67 upstream.

Disable reg and clk when devm_gpiod_get_optional() fails in adf4350_probe().

Fixes:4a89d2f47ccd ("iio: adf4350: Convert to use GPIO descriptor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210601142605.3613605-1-yangyingliang@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtc: stm32: Fix unbalanced clk_disable_unprepare() on probe error path

commit 950ac33dbe6ff656a623d862022f0762ec061ba7 upstream.

The STM32MP1 RTC may have 2 clocks, the pclk and the rtc_ck.

If clk_prepare_enable() fails for the second clock (rtc_ck) we must only
call clk_disable_unprepare() for the first clock (pclk) but currently we
call it on both leading to a WARN:

[   15.629568] WARNING: CPU: 0 PID: 146 at drivers/clk/clk.c:958 clk_core_disable+0xb0/0xc8
[   15.637620] ck_rtc already disabled
[   15.663322] CPU: 0 PID: 146 Comm: systemd-udevd Not tainted 5.4.77-pknbsp-svn5759-atag-v5.4.77-204-gea4235203137-dirty #2413
[   15.674510] Hardware name: STM32 (Device Tree Support)
[   15.679658] [<c0111148>] (unwind_backtrace) from [<c010c0b8>] (show_stack+0x10/0x14)
[   15.687371] [<c010c0b8>] (show_stack) from [<c0ab3d28>] (dump_stack+0xc0/0xe0)
[   15.694574] [<c0ab3d28>] (dump_stack) from [<c012360c>] (__warn+0xc8/0xf0)
[   15.701428] [<c012360c>] (__warn) from [<c0123694>] (warn_slowpath_fmt+0x60/0x94)
[   15.708894] [<c0123694>] (warn_slowpath_fmt) from [<c053b518>] (clk_core_disable+0xb0/0xc8)
[   15.717230] [<c053b518>] (clk_core_disable) from [<c053c190>] (clk_core_disable_lock+0x18/0x24)
[   15.725924] [<c053c190>] (clk_core_disable_lock) from [<bf0adc44>] (stm32_rtc_probe+0x124/0x5e4 [rtc_stm32])
[   15.735739] [<bf0adc44>] (stm32_rtc_probe [rtc_stm32]) from [<c05f7d4c>] (platform_drv_probe+0x48/0x98)
[   15.745095] [<c05f7d4c>] (platform_drv_probe) from [<c05f5cec>] (really_probe+0x1f0/0x458)
[   15.753338] [<c05f5cec>] (really_probe) from [<c05f61c4>] (driver_probe_device+0x70/0x1c4)
[   15.761584] [<c05f61c4>] (driver_probe_device) from [<c05f6580>] (device_driver_attach+0x58/0x60)
[   15.770439] [<c05f6580>] (device_driver_attach) from [<c05f6654>] (__driver_attach+0xcc/0x170)
[   15.779032] [<c05f6654>] (__driver_attach) from [<c05f40d8>] (bus_for_each_dev+0x58/0x7c)
[   15.787191] [<c05f40d8>] (bus_for_each_dev) from [<c05f4ffc>] (bus_add_driver+0xdc/0x1f8)
[   15.795352] [<c05f4ffc>] (bus_add_driver) from [<c05f6ed8>] (driver_register+0x7c/0x110)
[   15.803425] [<c05f6ed8>] (driver_register) from [<c01027bc>] (do_one_initcall+0x70/0x1b8)
[   15.811588] [<c01027bc>] (do_one_initcall) from [<c01a1094>] (do_init_module+0x58/0x1f8)
[   15.819660] [<c01a1094>] (do_init_module) from [<c01a0074>] (load_module+0x1e58/0x23c8)
[   15.827646] [<c01a0074>] (load_module) from [<c01a0860>] (sys_finit_module+0xa0/0xd4)
[   15.835459] [<c01a0860>] (sys_finit_module) from [<c01011e0>] (__sys_trace_return+0x0/0x20)

Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: 4e64350f42e2 ("rtc: add STM32 RTC driver")
Cc: stable@vger.kernel.org
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/1623087421-19722-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: agilex/stratix10: fix bypass representation

commit 6855ee839699bdabb4b16cf942557fd763bcb1fa upstream.

Each of these clocks(s2f_usr0/1, sdmmc_clk, gpio_db, emac_ptp,
emac0/1/2) have a bypass setting that can use the boot_clk. The
previous representation was not correct.

Fix the representation.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-2-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: agilex/stratix10: remove noc_clk

commit efbe21df3e889c0f4bf682c2b7e2465d60b0127c upstream.

Early documentation had a noc_clk, but in reality, it's just the
noc_free_clk. Remove the noc_clk clock and just use the noc_free_clk.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-1-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

clk: agilex/stratix10/n5x: fix how the bypass_reg is handled

commit dfd1427c3769ba51297777dbb296f1802d72dbf6 upstream.

If the bypass_reg is set, then we can return the bypass parent, however,
if there is not a bypass_reg, we need to figure what the correct parent
mux is.

The previous code never handled the parent mux if there was a
bypass_reg.

Fixes: 80c6b7a0894f ("clk: socfpga: agilex: add clock driver for the Agilex platform")
Cc: stable@vger.kernel.org
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://lore.kernel.org/r/20210611025201.118799-4-dinguyen@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

f2fs: Prevent swap file in LFS mode

commit d927ccfccb009ede24448d69c08b12e7c8a6979b upstream.

The kernel writes to swap files on f2fs directly without the assistance
of the filesystem. This direct write by kernel can be non-sequential
even when the f2fs is in LFS mode. Such non-sequential write conflicts
with the LFS semantics. Especially when f2fs is set up on zoned block
devices, the non-sequential write causes unaligned write command errors.

To avoid the non-sequential writes to swap files, prevent swap file
activation when the filesystem is in LFS mode.

Fixes: 4969c06a0d83 ("f2fs: support swap file w/ DIO")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Cc: stable@vger.kernel.org # v5.10+
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390: mm: Fix secure storage access exception handling

commit 85b18d7b5e7ffefb2f076186511d39c4990aa005 upstream.

Turns out that the bit 61 in the TEID is not always 1 and if that's
the case the address space ID and the address are
unpredictable. Without an address and its address space ID we can't
export memory and hence we can only send a SIGSEGV to the process or
panic the kernel depending on who caused the exception.

Unfortunately bit 61 is only reliable if we have the "misc" UV feature
bit.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Fixes: 084ea4d611a3d ("s390/mm: add (non)secure page access exceptions handlers")
Cc: stable@vger.kernel.org
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

s390/cio: dont call css_wait_for_slow_path() inside a lock

commit c749d8c018daf5fba6dfac7b6c5c78b27efd7d65 upstream.

Currently css_wait_for_slow_path() gets called inside the chp->lock.
The path-verification-loop of slowpath inside this lock could lead to
deadlock as reported by the lockdep validator.

The ccw_device_get_chp_desc() during the instance of a device-set-online
would try to acquire the same 'chp->lock' to read the chp->desc.
The instance of this function can get called from multiple scenario,
like probing or setting-device online manually. This could, in some
corner-cases lead to the deadlock.

lockdep validator reported this as,

        CPU0                    CPU1
        ----                    ----
   lock(&chp->lock);
                                lock(kn->active#43);
                                lock(&chp->lock);
   lock((wq_completion)cio);

The chp->lock was introduced to serialize the access of struct
channel_path. This lock is not needed for the css_wait_for_slow_path()
function, so invoke the slow-path function outside this lock.

Fixes: b730f3a93395 ("[S390] cio: add lock to struct channel_path")
Cc: <stable@vger.kernel.org>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Use MMU's role to detect CR4.SMEP value in nested NPT walk

commit ef318b9edf66a082f23d00d79b70c17b4c055a26 upstream.

Use the MMU's role to get its effective SMEP value when injecting a fault
into the guest.  When walking L1's (nested) NPT while L2 is active, vCPU
state will reflect L2, whereas NPT uses the host's (L1 in this case) CR0,
CR4, EFER, etc...  If L1 and L2 have different settings for SMEP and
L1 does not have EFER.NX=1, this can result in an incorrect PFEC.FETCH
when injecting #NPF.

Fixes: e57d4a356ad3 ("KVM: Add instruction fetch checking when walking guest page table")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: x86/mmu: Treat NX as used (not reserved) for all !TDP shadow MMUs

commit 112022bdb5bc372e00e6e43cb88ee38ea67b97bd upstream.

Mark NX as being used for all non-nested shadow MMUs, as KVM will set the
NX bit for huge SPTEs if the iTLB mutli-hit mitigation is enabled.
Checking the mitigation itself is not sufficient as it can be toggled on
at any time and KVM doesn't reset MMU contexts when that happens.  KVM
could reset the contexts, but that would require purging all SPTEs in all
MMUs, for no real benefit.  And, KVM already forces EFER.NX=1 when TDP is
disabled (for WP=0, SMEP=1, NX=0), so technically NX is never reserved
for shadow MMUs.

Fixes: b8e8c8303ff2 ("kvm: mmu: ITLB_MULTIHIT mitigation")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622175739.3610207-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: PPC: Book3S HV: Workaround high stack usage with clang

commit 51696f39cbee5bb684e7959c0c98b5f54548aa34 upstream.

LLVM does not emit optimal byteswap assembly, which results in high
stack usage in kvmhv_enter_nested_guest() due to the inlining of
byteswap_pt_regs(). With LLVM 12.0.0:

arch/powerpc/kvm/book3s_hv_nested.c:289:6: error: stack frame size of
2512 bytes in function 'kvmhv_enter_nested_guest' [-Werror,-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
     ^
1 error generated.

While this gets fixed in LLVM, mark byteswap_pt_regs() as
noinline_for_stack so that it does not get inlined and break the build
due to -Werror by default in arch/powerpc/. Not inlining saves
approximately 800 bytes with LLVM 12.0.0:

arch/powerpc/kvm/book3s_hv_nested.c:290:6: warning: stack frame size of
1728 bytes in function 'kvmhv_enter_nested_guest' [-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
     ^
1 warning generated.

Cc: stable@vger.kernel.org # v4.20+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1292
Link: https://bugs.llvm.org/show_bug.cgi?id=49610
Link: https://lore.kernel.org/r/202104031853.vDT0Qjqj-lkp@intel.com/
Link: https://gist.github.com/ba710e3703bf45043a31e2806c843ffd
Link: https://lore.kernel.org/r/20210621182440.990242-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

KVM: nVMX: Handle split-lock #AC exceptions that happen in L2

commit b33bb78a1fada6445c265c585ee0dd0fc6279102 upstream.

Mark #ACs that won't be reinjected to the guest as wanted by L0 so that
KVM handles split-lock #AC from L2 instead of forwarding the exception to
L1.  Split-lock #AC isn't yet virtualized, i.e. L1 will treat it like a
regular #AC and do the wrong thing, e.g. reinject it into L2.

Fixes: e6f8b6c12f03 ("KVM: VMX: Extend VMXs #AC interceptor to handle split lock #AC in guest")
Cc: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210622172244.3561540-1-seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

perf/smmuv3: Don't trample existing events with global filter

commit 4c1daba15c209b99d192f147fea3dade30f72ed2 upstream.

With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.

CC: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mm/gup: fix try_grab_compound_head() race with split_huge_page()

commit c24d37322548a6ec3caec67100d28b9c1f89f60a upstream.

try_grab_compound_head() is used to grab a reference to a page from
get_user_pages_fast(), which is only protected against concurrent freeing
of page tables (via local_irq_save()), but not against concurrent TLB
flushes, freeing of data pages, or splitting of compound pages.

Because no reference is held to the page when try_grab_compound_head() is
called, the page may have been freed and reallocated by the time its
refcount has been elevated; therefore, once we're holding a stable
reference to the page, the caller re-checks whether the PTE still points
to the same page (with the same access rights).

The problem is that try_grab_compound_head() has to grab a reference on
the head page; but between the time we look up what the head page is and
the time we actually grab a reference on the head page, the compound page
may have been split up (either explicitly through split_huge_page() or by
freeing the compound page to the buddy allocator and then allocating its
individual order-0 pages).  If that happens, get_user_pages_fast() may end
up returning the right page but lifting the refcount on a now-unrelated
page, leading to use-after-free of pages.

To fix it: Re-check whether the pages still belong together after lifting
the refcount on the head page.  Move anything else that checks
compound_head(page) below the refcount increment.

This can't actually happen on bare-metal x86 (because there, disabling
IRQs locks out remote TLB flushes), but it can happen on virtualized x86
(e.g.  under KVM) and probably also on arm64.  The race window is pretty
narrow, and constantly allocating and shattering hugepages isn't exactly
fast; for now I've only managed to reproduce this in an x86 KVM guest with
an artificially widened timing window (by adding a loop that repeatedly
calls `inl(0x3f8 + 5)` in `try_get_compound_head()` to force VM exits, so
that PV TLB flushes are used instead of IPIs).

As requested on the list, also replace the existing VM_BUG_ON_PAGE() with
a warning and bailout.  Since the existing code only performed the BUG_ON
check on DEBUG_VM kernels, ensure that the new code also only performs the
check under that configuration - I don't want to mix two logically
separate changes together too much.  The macro VM_WARN_ON_ONCE_PAGE()
doesn't return a value on !DEBUG_VM, so wrap the whole check in an #ifdef
block.  An alternative would be to change the VM_WARN_ON_ONCE_PAGE()
definition for !DEBUG_VM such that it always returns false, but since that
would differ from the behavior of the normal WARN macros, it might be too
confusing for readers.

Link: https://lkml.kernel.org/r/20210615012014.1100672-1-jannh@google.com
Fixes: 7aef4172c795 ("mm: handle PTE-mapped tail pages in gerneric fast gup implementaiton")
Signed-off-by: Jann Horn <jannh@google.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Kirill A. Shutemov <kirill@shutemov.name>
Cc: Jan Kara <jack@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

bus: mhi: Wait for M2 state during system resume

commit 02b49cd1174527e611768fc2ce0f75a74dfec7ae upstream.

During system resume, MHI host triggers M3->M0 transition and then waits
for target device to enter M0 state. Once done, the device queues a state
change event into ctrl event ring and notifies MHI host by raising an
interrupt, where a tasklet is scheduled to process this event. In most
cases, the tasklet is served timely and wait operation succeeds.

However, there are cases where CPU is busy and cannot serve this tasklet
for some time. Once delay goes long enough, the device moves itself to M1
state and also interrupts MHI host after inserting a new state change
event to ctrl ring. Later when CPU finally has time to process the ring,
there will be two events:

1. For M3->M0 event, which is the first event to be processed queued first.
   The tasklet handler serves the event, updates device state to M0 and
   wakes up the task.

2. For M0->M1 event, which is processed later, the tasklet handler
   triggers M1->M2 transition and updates device state to M2 directly,
   then wakes up the MHI host (if it is still sleeping on this wait queue).

Note that although MHI host has been woken up while processing the first
event, it may still has no chance to run before the second event is
processed. In other words, MHI host has to keep waiting till timeout
causing the M0 state to be missed.

kernel log here:
...
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1
Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2
...

Fix this issue by simply adding M2 as a valid state for resume.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Cc: stable@vger.kernel.org
Fixes: 0c6b20a1d720 ("bus: mhi: core: Add support for MHI suspend and resume")
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Reviewed-by: Hemant Kumar <hemantk@codeaurora.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org
[mani: slightly massaged the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Should wake up the privileged task firstly.

commit 5483b904bf336948826594610af4c9bbb0d9e3aa upstream.

When find a task from wait queue to wake up, a non-privileged task may
be found out, rather than the privileged. This maybe lead a deadlock
same as commit dfe1fe75e00e ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):

Privileged delegreturn task is queued to privileged list because all
the slots are assigned. If there has no enough slot to wake up the
non-privileged batch tasks(session less than 8 slot), then the privileged
delegreturn task maybe lost waked up because the found out task can't
get slot since the session is on draining.

So we should treate the privileged task as the emergency task, and
execute it as for as we can.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5fcdfacc01f3 ("NFSv4: Return delegations synchronously in evict_inode")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

SUNRPC: Fix the batch tasks count wraparound.

commit fcb170a9d825d7db4a3fb870b0300f5a40a8d096 upstream.

The 'queue->nr' will wraparound from 0 to 255 when only current
priority queue has tasks. This maybe lead a deadlock same as commit
dfe1fe75e00e ("NFSv4: Fix deadlock between nfs4_evict_inode()
and nfs4_opendata_get_inode()"):

Privileged delegreturn task is queued to privileged list because all
the slots are assigned. When non-privileged task complete and release
the slot, a non-privileged maybe picked out. It maybe allocate slot
failed when the session on draining.

If the 'queue->nr' has wraparound to 255, and no enough slot to
service it, then the privileged delegreturn will lost to wake up.

So we should avoid the wraparound on 'queue->nr'.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 5fcdfacc01f3 ("NFSv4: Return delegations synchronously in evict_inode")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

mac80211: remove iwlwifi specific workaround that broke sta NDP tx

commit e41eb3e408de27982a5f8f50b2dd8002bed96908 upstream.

Sending nulldata packets is important for sw AP link probing and detecting
4-address mode links. The checks that dropped these packets were apparently
added to work around an iwlwifi firmware bug with multi-TID aggregation.

Fixes: 41cbb0f5a295 ("mac80211: add support for HE")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20210619101517.90806-1-nbd@nbd.name
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: peak_pciefd: pucan_handle_status(): fix a potential starvation issue in TX path

commit b17233d385d0b6b43ecf81d43008cb1bbb008166 upstream.

Rather than just indicating that transmission can start, this patch
requires the explicit flushing of the network TX queue when the driver
is informed by the device that it can transmit, next to its
configuration.

In this way, if frames have already been written by the application,
they will actually be transmitted.

Fixes: ffd137f7043c ("can: peak/pcie_fd: remove useless code when interface starts")
Link: https://lore.kernel.org/r/20210623142600.149904-1-s.grosjean@peak-system.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: j1939: j1939_sk_init(): set SOCK_RCU_FREE to call sk_destruct() after RCU is done

commit 22c696fed25c63c7f67508309820358b94a96b6d upstream.

Set SOCK_RCU_FREE to let RCU to call sk_destruct() on completion.
Without this patch, we will run in to j1939_can_recv() after priv was
freed by j1939_sk_release()->j1939_sk_sock_destruct()

Fixes: 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback")
Link: https://lore.kernel.org/r/20210617130623.12705-1-o.rempel@pengutronix.de
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Reported-by: syzbot+bdf710cfc41c186fdff3@syzkaller.appspotmail.com
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: isotp: isotp_release(): omit unintended hrtimer restart on socket release

commit 14a4696bc3118ba49da28f79280e1d55603aa737 upstream.

When closing the isotp socket, the potentially running hrtimers are
canceled before removing the subscription for CAN identifiers via
can_rx_unregister().

This may lead to an unintended (re)start of a hrtimer in
isotp_rcv_cf() and isotp_rcv_fc() in the case that a CAN frame is
received by isotp_rcv() while the subscription removal is processed.

However, isotp_rcv() is called under RCU protection, so after calling
can_rx_unregister, we may call synchronize_rcu in order to wait for
any RCU read-side critical sections to finish. This prevents the
reception of CAN frames after hrtimer_cancel() and therefore the
unintended (re)start of the hrtimers.

Link: https://lore.kernel.org/r/20210618173713.2296-1-socketcan@hartkopp.net
Fixes: e057dd3fc20f ("can: add ISO 15765-2:2016 transport protocol")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: gw: synchronize rcu operations before removing gw job entry

commit fb8696ab14adadb2e3f6c17c18ed26b3ecd96691 upstream.

can_can_gw_rcv() is called under RCU protection, so after calling
can_rx_unregister(), we have to call synchronize_rcu in order to wait
for any RCU read-side critical sections to finish before removing the
kmem_cache entry with the referenced gw job entry.

Link: https://lore.kernel.org/r/20210618173645.2238-1-socketcan@hartkopp.net
Fixes: c1aabdf379bc ("can-gw: add netlink based CAN routing")
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

can: bcm: delay release of struct bcm_op after synchronize_rcu()

commit d5f9023fa61ee8b94f37a93f08e94b136cf1e463 upstream.

can_rx_register() callbacks may be called concurrently to the call to
can_rx_unregister(). The callbacks and callback data, though, are
protected by RCU and the struct sock reference count.

So the callback data is really attached to the life of sk, meaning
that it should be released on sk_destruct. However, bcm_remove_op()
calls tasklet_kill(), and RCU callbacks may be called under RCU
softirq, so that cannot be used on kernels before the introduction of
HRTIMER_MODE_SOFT.

However, bcm_rx_handler() is called under RCU protection, so after
calling can_rx_unregister(), we may call synchronize_rcu() in order to
wait for any RCU read-side critical sections to finish. That is,
bcm_rx_handler() won't be called anymore for those ops. So, we only
free them, after we do that synchronize_rcu().

Fixes: ffd980f976e7 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: use ext4_grp_locked_error in mb_find_extent

commit cd84bbbac12a173a381a64c6ec8b76a5277b87b5 upstream.

Commit 5d1b1b3f492f ("ext4: fix BUG when calling ext4_error with locked
block group") introduces ext4_grp_locked_error to handle unlocking a
group in error cases. Otherwise, there is a possibility of a sleep while
atomic. However, since 43c73221b3b1 ("ext4: replace BUG_ON with WARN_ON
in mb_find_extent()"), mb_find_extent() has contained a ext4_error()
call while a group spinlock is held. Replace this with
ext4_grp_locked_error.

Fixes: 43c73221b3b1 ("ext4: replace BUG_ON with WARN_ON in mb_find_extent()")
Cc: <stable@vger.kernel.org> # 4.14+
Signed-off-by: Stephen Brennan <stephen.s.brennan@oracle.com>
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20210623232114.34457-1-stephen.s.brennan@oracle.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix avefreec in find_group_orlov

commit c89849cc0259f3d33624cc3bd127685c3c0fa25d upstream.

The avefreec should be average free clusters instead
of average free blocks, otherwize Orlov's allocator
will not work properly when bigalloc enabled.

Cc: stable@kernel.org
Signed-off-by: Pan Dong <pandong.peter@bytedance.com>
Link: https://lore.kernel.org/r/20210525073656.31594-1-pandong.peter@bytedance.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: remove check for zero nr_to_scan in ext4_es_scan()

commit e5e7010e5444d923e4091cafff61d05f2d19cada upstream.

After converting fs shrinkers to new scan/count API, we are no longer
pass zero nr_to_scan parameter to detect the number of objects to free,
just remove this check.

Fixes: 1ab6c4997e04 ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-2-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: correct the cache_nr in tracepoint ext4_es_shrink_exit

commit 4fb7c70a889ead2e91e184895ac6e5354b759135 upstream.

The cache_cnt parameter of tracepoint ext4_es_shrink_exit means the
remaining cache count after shrink, but now it is the cache count before
shrink, fix it by read sbi->s_extent_cache_cnt again.

Fixes: 1ab6c4997e04 ("fs: convert fs shrinkers to new scan/count API")
Cc: stable@vger.kernel.org # 3.12+
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210522103045.690103-3-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: return error code when ext4_fill_flex_info() fails

commit 8f6840c4fd1e7bd715e403074fb161c1a04cda73 upstream.

After commit c89128a00838 ("ext4: handle errors on
ext4_commit_super"), 'ret' may be set to 0 before calling
ext4_fill_flex_info(), if ext4_fill_flex_info() fails ext4_mount()
doesn't return error code, it makes 'root' is null which causes crash
in legacy_get_tree().

Fixes: c89128a00838 ("ext4: handle errors on ext4_commit_super")
Reported-by: Hulk Robot <hulkci@huawei.com>
Cc: <stable@vger.kernel.org> # v4.18+
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210510111051.55650-1-yangyingliang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix overflow in ext4_iomap_alloc()

commit d0b040f5f2557b2f507c01e88ad8cff424fdc6a9 upstream.

A code in iomap alloc may overflow block number when converting it to
byte offset. Luckily this is mostly harmless as we will just use more
expensive method of writing using unwritten extents even though we are
writing beyond i_size.

Cc: stable@kernel.org
Fixes: 378f32bab371 ("ext4: introduce direct I/O write using iomap infrastructure")
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210412102333.2676-4-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: fix kernel infoleak via ext4_extent_header

commit ce3aba43599f0b50adbebff133df8d08a3d5fffe upstream.

Initialize eh_generation of struct ext4_extent_header to prevent leaking
info to userspace. Fixes KMSAN kernel-infoleak bug reported by syzbot at:
http://syzkaller.appspot.com/bug?id=78e9ad0e6952a3ca16e8234724b2fa92d041b9b8

Cc: stable@kernel.org
Reported-by: syzbot+2dcfeaf8cb49b05e8f1a@syzkaller.appspotmail.com
Fixes: a86c61812637 ("[PATCH] ext3: add extent map support")
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Link: https://lore.kernel.org/r/20210506185655.7118-1-mail@anirudhrb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ext4: cleanup in-core orphan list if ext4_truncate() failed to get a transaction handle

commit b9a037b7f3c401d3c63e0423e56aef606b1ffaaf upstream.

In ext4_orphan_cleanup(), if ext4_truncate() failed to get a transaction
handle, it didn't remove the inode from the in-core orphan list, which
may probably trigger below error dump in ext4_destroy_inode() during the
final iput() and could lead to memory corruption on the later orphan
list changes.

 EXT4-fs (sda): Inode 6291467 (00000000b8247c67): orphan list check failed!
 00000000b8247c67: 0001f30a 00000004 00000000 00000023  ............#...
 00000000e24cde71: 00000006 014082a3 00000000 00000000  ......@.........
 0000000072c6a5ee: 00000000 00000000 00000000 00000000  ................
 ...

This patch fix this by cleanup in-core orphan list manually if
ext4_truncate() return error.

Cc: stable@kernel.org
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20210507071904.160808-1-yi.zhang@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: clear defrag status of a root if starting transaction fails

commit 6819703f5a365c95488b07066a8744841bf14231 upstream.

The defrag loop processes leaves in batches and starting transaction for
each. The whole defragmentation on a given root is protected by a bit
but in case the transaction fails, the bit is not cleared

In case the transaction fails the bit would prevent starting
defragmentation again, so make sure it's cleared.

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: compression: don't try to compress if we don't have enough pages

commit f2165627319ffd33a6217275e5690b1ab5c45763 upstream.

The early check if we should attempt compression does not take into
account the number of input pages. It can happen that there's only one
page, eg. a tail page after some ranges of the BTRFS_MAX_UNCOMPRESSED
have been processed, or an isolated page that won't be converted to an
inline extent.

The single page would be compressed but a later check would drop it
again because the result size must be at least one block shorter than
the input. That can never work with just one page.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

btrfs: send: fix invalid path for unlink operations after parent orphanization

commit d8ac76cdd1755b21e8c008c28d0b7251c0b14986 upstream.

During an incremental send operation, when processing the new references
for the current inode, we might send an unlink operation for another inode
that has a conflicting path and has more than one hard link. However this
path was computed and cached before we processed previous new references
for the current inode. We may have orphanized a directory of that path
while processing a previous new reference, in which case the path will
be invalid and cause the receiver process to fail.

The following reproducer triggers the problem and explains how/why it
happens in its comments:

  $ cat test-send-unlink.sh
  #!/bin/bash

  DEV=/dev/sdi
  MNT=/mnt/sdi

  mkfs.btrfs -f $DEV >/dev/null
  mount $DEV $MNT

  # Create our test files and directory. Inode 259 (file3) has two hard
  # links.
  touch $MNT/file1
  touch $MNT/file2
  touch $MNT/file3

  mkdir $MNT/A
  ln $MNT/file3 $MNT/A/hard_link

  # Filesystem looks like:
  #
  # .                                     (ino 256)
  # |----- file1                          (ino 257)
  # |----- file2                          (ino 258)
  # |----- file3                          (ino 259)
  # |----- A/                             (ino 260)
  #        |---- hard_link                (ino 259)
  #

  # Now create the base snapshot, which is going to be the parent snapshot
  # for a later incremental send.
  btrfs subvolume snapshot -r $MNT $MNT/snap1
  btrfs send -f /tmp/snap1.send $MNT/snap1

  # Move inode 257 into directory inode 260. This results in computing the
  # path for inode 260 as "/A" and caching it.
  mv $MNT/file1 $MNT/A/file1

  # Move inode 258 (file2) into directory inode 260, with a name of
  # "hard_link", moving first inode 259 away since it currently has that
  # location and name.
  mv $MNT/A/hard_link $MNT/tmp
  mv $MNT/file2 $MNT/A/hard_link

  # Now rename inode 260 to something else (B for example) and then create
  # a hard link for inode 258 that has the old name and location of inode
  # 260 ("/A").
  mv $MNT/A $MNT/B
  ln $MNT/B/hard_link $MNT/A

  # Filesystem now looks like:
  #
  # .                                     (ino 256)
  # |----- tmp                            (ino 259)
  # |----- file3                          (ino 259)
  # |----- B/                             (ino 260)
  # |      |---- file1                    (ino 257)
  # |      |---- hard_link                (ino 258)
  # |
  # |----- A                              (ino 258)

  # Create another snapshot of our subvolume and use it for an incremental
  # send.
  btrfs subvolume snapshot -r $MNT $MNT/snap2
  btrfs send -f /tmp/snap2.send -p $MNT/snap1 $MNT/snap2

  # Now unmount the filesystem, create a new one, mount it and try to
  # apply both send streams to recreate both snapshots.
  umount $DEV

  mkfs.btrfs -f $DEV >/dev/null

  mount $DEV $MNT

  # First add the first snapshot to the new filesystem by applying the
  # first send stream.
  btrfs receive -f /tmp/snap1.send $MNT

  # The incremental receive operation below used to fail with the
  # following error:
  #
  #    ERROR: unlink A/hard_link failed: No such file or directory
  #
  # This is because when send is processing inode 257, it generates the
  # path for inode 260 as "/A", since that inode is its parent in the send
  # snapshot, and caches that path.
  #
  # Later when processing inode 258, it first processes its new reference
  # that has the path of "/A", which results in orphanizing inode 260
  # because there is a a path collision. This results in issuing a rename
  # operation from "/A" to "/o260-6-0".
  #
  # Finally when processing the new reference "B/hard_link" for inode 258,
  # it notices that it collides with inode 259 (not yet processed, because
  # it has a higher inode number), since that inode has the name
  # "hard_link" under the directory inode 260. It also checks that inode
  # 259 has two hardlinks, so it decides to issue a unlink operation for
  # the name "hard_link" for inode 259. However the path passed to the
  # unlink operation is "/A/hard_link", which is incorrect since currently
  # "/A" does not exists, due to the orphanization of inode 260 mentioned
  # before. The path is incorrect because it was computed and cached
  # before the orphanization. This results in the receiver to fail with
  # the above error.
  btrfs receive -f /tmp/snap2.send $MNT

  umount $MNT

When running the test, it fails like this:

  $ ./test-send-unlink.sh
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap1'
  At subvol /mnt/sdi/snap1
  Create a readonly snapshot of '/mnt/sdi' in '/mnt/sdi/snap2'
  At subvol /mnt/sdi/snap2
  At subvol snap1
  At snapshot snap2
  ERROR: unlink A/hard_link failed: No such file or directory

Fix this by recomputing a path before issuing an unlink operation when
processing the new references for the current inode if we previously
have orphanized a directory.

A test case for fstests will follow soon.

CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: at91: sama5d4: fix pinctrl muxing

commit 253adffb0e98eaf6da2e7cf73ae68695e21f2f3c upstream.

Fix pinctrl muxing, PD28, PD29 and PD31 can be muxed to peripheral A. It
allows to use SCK0, SCK1 and SPI0_NPCS2 signals.

Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Fixes: 679f8d92bb01 ("ARM: at91/dt: sama5d4: add pioD pin mux mask and enable pioD")
Cc: stable@vger.kernel.org # v4.4+
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20191025084210.14726-1-ludovic.desroches@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ARM: dts: ux500: Fix LED probing

commit 7749510c459c10c431d746a4749e7c9cf2899156 upstream.

The Ux500 HREF LEDs have not been probing properly for a
while as this was introduce:

     ret = of_property_read_u32(np, "color", &led_color);
     if (ret)
             return ret;

Since the device tree did not define the new invented color
attribute, probe was failing.

Define color attributes for the LEDs so they work again.

Link: https://lore.kernel.org/r/20210613123356.880933-1-linus.walleij@linaro.org
Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx")
Cc: stable@vger.kernel.org
Cc: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

arm_pmu: Fix write counter incorrect in ARMv7 big-endian mode

commit fdbef8c4e68ad423416aa6cc93d1616d6f8ac5b3 upstream.

Commit 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
changes the input "value" type from 32-bit to 64-bit, which introduces the
following problem: ARMv7 PMU counters is 32-bit width, in big-endian mode,
write counter uses high 32-bit, which writes an incorrect value.

Before:

 Performance counter stats for 'ls':

              2.22 msec task-clock                #    0.675 CPUs utilized
                 0      context-switches          #    0.000 K/sec
                 0      cpu-migrations            #    0.000 K/sec
                49      page-faults               #    0.022 M/sec
        2150476593      cycles                    #  966.663 GHz
        2148588788      instructions              #    1.00  insn per cycle
        2147745484      branches                  # 965435.074 M/sec
        2147508540      branch-misses             #   99.99% of all branches

None of the above hw event counters are correct.

Solution:

"value" forcibly converted to 32-bit type before being written to PMU register.

After:

 Performance counter stats for 'ls':

              2.09 msec task-clock                #    0.681 CPUs utilized
                 0      context-switches          #    0.000 K/sec
                 0      cpu-migrations            #    0.000 K/sec
                46      page-faults               #    0.022 M/sec
           2807301      cycles                    #    1.344 GHz
           1060159      instructions              #    0.38  insn per cycle
            250496      branches                  #  119.914 M/sec
             23192      branch-misses             #    9.26% of all branches

Fixes: 3a95200d3f89 ("arm_pmu: Change API to support 64bit counter values")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210430012659.232110-1-yangjihong1@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: ccp - Annotate SEV Firmware file names

commit c8671c7dc7d51125ab9f651697866bf4a9132277 upstream.

Annotate the firmware files CCP might need using MODULE_FIRMWARE().
This will get them included into an initrd when CCP is also included
there. Otherwise the CCP module will not find its firmware when loaded
before the root-fs is mounted.
This can cause problems when the pre-loaded SEV firmware is too old to
support current SEV and SEV-ES virtualization features.

Fixes: e93720606efd ("crypto: ccp - Allow SEV firmware to be chosen based on Family and Model")
Cc: stable@vger.kernel.org # v4.20+
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

crypto: nx - Fix memcpy() over-reading in nonce

commit 74c66120fda6596ad57f41e1607b3a5d51ca143d upstream.

Fix typo in memcpy() where size should be CTR_RFC3686_NONCE_SIZE.

Fixes: 030f4e968741 ("crypto: nx - Fix reentrancy bugs")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl

commit f8f84af5da9ee04ef1d271528656dac42a090d00 upstream.

Even though we validate user-provided inputs we then traverse past
validated data when applying the new map. The issue was originally
discovered by Murray McAllister with this simple POC (if the following
is executed by an unprivileged user it will instantly panic the system):

int main(void) {
int fd, ret;
unsigned int buffer[10000];

fd = open("/dev/input/js0", O_RDONLY);
if (fd == -1)
printf("Error opening file\n");

ret = ioctl(fd, JSIOCSBTNMAP & ~IOCSIZE_MASK, &buffer);
printf("%d\n", ret);
}

The solution is to traverse internal buffer which is guaranteed to only
contain valid date when constructing the map.

Fixes: 182d679b2298 ("Input: joydev - prevent potential read overflow in ioctl")
Fixes: 999b874f4aa3 ("Input: joydev - validate axis/button maps before clobbering current ones")
Reported-by: Murray McAllister <murray.mcallister@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Alexander Larkin <avlarkin82@gmail.com>
Link: https://lore.kernel.org/r/20210620120030.1513655-1-avlarkin82@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

iov_iter_fault_in_readable() should do nothing in xarray case

commit 0e8f0d67401589a141950856902c7d0ec8d9c985 upstream.

... and actually should just check it's given an iovec-backed iterator
in the first place.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

copy_page_to_iter(): fix ITER_DISCARD case

commit a506abc7b644d71966a75337d5a534f531b3cdc4 upstream.

we need to advance the iterator...

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

selftests/lkdtm: Avoid needing explicit sub-shell

commit 04831e892b41618914b2123ae3b4fa77252e8656 upstream.

Some environments do not set $SHELL when running tests. There's no
need to use $SHELL here anyway, since "cat" can be used to receive any
delivered signals from the kernel. Additionally avoid using bash-isms
in the command, and record stderr for posterity.

Fixes: 46d1a0f03d66 ("selftests/lkdtm: Add tests for LKDTM targets")
Cc: stable@vger.kernel.org
Suggested-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210623203936.3151093-2-keescook@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ntfs: fix validity check for file name attribute

commit d98e4d95411bbde2220a7afa38dcc9c14d71acbe upstream.

When checking the file name attribute, we want to ensure that it fits
within the bounds of ATTR_RECORD.  To do this, we should check that (attr
record + file name offset + file name length) < (attr record + attr record
length).

However, the original check did not include the file name offset in the
calculation.  This means that corrupted on-disk metadata might not caught
by the incorrect file name check, and lead to an invalid memory access.

An example can be seen in the crash report of a memory corruption error
found by Syzbot:
https://syzkaller.appspot.com/bug?id=a1a1e379b225812688566745c3e2f7242bffc246

Adding the file name offset to the validity check fixes this error and
passes the Syzbot reproducer test.

Link: https://lkml.kernel.org/r/20210614050540.289494-1-desmondcheongzx@gmail.com
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Reported-by: syzbot+213ac8bb98f7f4420840@syzkaller.appspotmail.com
Tested-by: syzbot+213ac8bb98f7f4420840@syzkaller.appspotmail.com
Acked-by: Anton Altaparmakov <anton@tuxera.com>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix error handling in init_statfs

commit 5d49d3508b3c67201bd3e1bf7f4ef049111b7051 upstream.

On an error path, init_statfs calls iput(pn) after pn has already been put.
Fix that by setting pn to NULL after the initial iput.

Fixes: 97fd734ba17e ("gfs2: lookup local statfs inodes prior to journal recovery")
Cc: stable@vger.kernel.org # v5.10+
Reported-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

gfs2: Fix underflow in gfs2_page_mkwrite

commit d3c51c55cb9274dd43c156f1f26b5eb4d5f2d58c upstream.

On filesystems with a block size smaller than PAGE_SIZE and non-empty
files smaller then PAGE_SIZE, gfs2_page_mkwrite could end up allocating
excess blocks beyond the end of the file, similar to fallocate.  This
doesn't make sense; fix it.

Reported-by: Bob Peterson <rpeterso@redhat.com>
Fixes: 184b4e60853d ("gfs2: Fix end-of-file handling in gfs2_page_mkwrite")
Cc: stable@vger.kernel.org # v5.5+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

xhci: solve a double free problem while doing s4

commit b31d9d6d7abbf6483b871b6370bc31c930d53f54 upstream.

when system is doing s4, the process of xhci_resume may be as below:
1、xhci_mem_cleanup
2、xhci_init->xhci_mem_init->xhci_mem_cleanup(when memory is not enough).
xhci_mem_cleanup will be executed twice when system is out of memory.
xhci->port_caps is freed in xhci_mem_cleanup,but it isn't set to NULL.
It will be freed twice when xhci_mem_cleanup is called the second time.

We got following bug when system resumes from s4:

kernel BUG at mm/slub.c:309!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
CPU: 0 PID: 5929 Tainted: G S   W   5.4.96-arm64-desktop #1
pc : __slab_free+0x5c/0x424
lr : kfree+0x30c/0x32c

Call trace:
 __slab_free+0x5c/0x424
 kfree+0x30c/0x32c
 xhci_mem_cleanup+0x394/0x3cc
 xhci_mem_init+0x9ac/0x1070
 xhci_init+0x8c/0x1d0
 xhci_resume+0x1cc/0x5fc
 xhci_plat_resume+0x64/0x70
 platform_pm_thaw+0x28/0x60
 dpm_run_callback+0x54/0x24c
 device_resume+0xd0/0x200
 async_resume+0x24/0x60
 async_run_entry_fn+0x44/0x110
 process_one_work+0x1f0/0x490
 worker_thread+0x5c/0x450
 kthread+0x158/0x160
 ret_from_fork+0x10/0x24

Original patch that caused this issue was backported to 4.4 stable,
so this should be backported to 4.4 stabe as well.

Fixes: cf0ee7c60c89 ("xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2")
Cc: stable@vger.kernel.org # v4.4+
Signed-off-by: Jiantao Zhang <water.zhangjiantao@huawei.com>
Signed-off-by: Tao Xue <xuetao09@huawei.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20210617150354.1512157-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: typec: Add the missed altmode_id_remove() in typec_register_altmode()

commit 03026197bb657d784220b040c6173267a0375741 upstream.

typec_register_altmode() misses to call altmode_id_remove() in an error
path. Add the missed function call to fix it.

Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes")
Cc: stable <stable@vger.kernel.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Link: https://lore.kernel.org/r/20210617073226.47599-1-jingxiangfeng@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: dwc3: Fix debugfs creation flow

commit 84524d1232ecca7cf8678e851b254f05cff4040a upstream.

Creation EP's debugfs called earlier than debugfs folder for dwc3
device created. As result EP's debugfs are created in '/sys/kernel/debug'
instead of '/sys/kernel/debug/usb/dwc3.1.auto'.

Moved dwc3_debugfs_init() function call before calling
dwc3_core_init_mode() to allow create dwc3 debugfs parent before
creating EP's debugfs's.

Fixes: 8d396bb0a5b6 ("usb: dwc3: debugfs: Add and remove endpoint dirs dynamically")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Jack Pham <jackp@codeaurora.org>
Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/01fafb5b2d8335e98e6eadbac61fc796bdf3ec1a.1623948457.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

USB: cdc-acm: blacklist Heimann USB Appset device

commit 4897807753e078655a78de39ed76044d784f3e63 upstream.

The device (32a7:0000 Heimann Sensor GmbH USB appset demo) claims to be
a CDC-ACM device in its descriptors but in fact is not. If it is run
with echo disabled it returns garbled data, probably due to something
that happens in the TTY layer. And when run with echo enabled (the
default), it will mess up the calibration data of the sensor the first
time any data is sent to the device.

In short, I had a bad time after connecting the sensor and trying to get
it to work. I hope blacklisting it in the cdc-acm driver will save
someone else a bit of trouble.

Signed-off-by: Hannu Hartikainen <hannu@hrtk.in>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210622141454.337948-1-hannu@hrtk.in
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: renesas-xhci: Fix handling of unknown ROM state

commit d143825baf15f204dac60acdf95e428182aa3374 upstream.

The ROM load sometimes seems to return an unknown status
(RENESAS_ROM_STATUS_NO_RESULT) instead of success / fail.

If the ROM load indeed failed this leads to failures when trying to
communicate with the controller later on.

Attempt to load firmware using RAM load in those cases.

Fixes: 2478be82de44 ("usb: renesas-xhci: Add ROM loader for uPD720201")
Cc: stable@vger.kernel.org
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Vinod Koul <vkoul@kernel.org>
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210615153758.253572-1-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

usb: gadget: eem: fix echo command packet response issue

commit 4249d6fbc10fd997abdf8a1ea49c0389a0edf706 upstream.

when receive eem echo command, it will send a response,
but queue this response to the usb request which allocate
from gadget device endpoint zero,
and transmit the request to IN endpoint of eem interface.

on dwc3 gadget, it will trigger following warning in function
__dwc3_gadget_ep_queue(),

if (WARN(req->dep != dep, "request %pK belongs to '%s'\n",
&req->request, req->dep->name))
return -EINVAL;

fix it by allocating a usb request from IN endpoint of eem interface,
and transmit the usb request to same IN endpoint of eem interface.

Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

net: can: ems_usb: fix use-after-free in ems_usb_disconnect()

commit ab4a0b8fcb9a95c02909b62049811bd2e586aaa4 upstream.

In ems_usb_disconnect() dev pointer, which is netdev private data, is
used after free_candev() call:
|  if (dev) {
|  unregister_netdev(dev->netdev);
|  free_candev(dev->netdev);
|
|  unlink_all_urbs(dev);
|
|  usb_free_urb(dev->intr_urb);
|
|  kfree(dev->intr_in_buffer);
|  kfree(dev->tx_msg_buffer);
|  }

Fix it by simply moving free_candev() at the end of the block.

Fail log:
| BUG: KASAN: use-after-free in ems_usb_disconnect
| Read of size 8 at addr ffff88804e041008 by task kworker/1:2/2895
|
| CPU: 1 PID: 2895 Comm: kworker/1:2 Not tainted 5.13.0-rc5+ #164
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a-rebuilt.opensuse.4
| Workqueue: usb_hub_wq hub_event
| Call Trace:
|     dump_stack (lib/dump_stack.c:122)
|     print_address_description.constprop.0.cold (mm/kasan/report.c:234)
|     kasan_report.cold (mm/kasan/report.c:420 mm/kasan/report.c:436)
|     ems_usb_disconnect (drivers/net/can/usb/ems_usb.c:683 drivers/net/can/usb/ems_usb.c:1058)

Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/20210617185130.5834-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Input: usbtouchscreen - fix control-request directions

commit 41e81022a04a0294c55cfa7e366bc14b9634c66e upstream.

The direction of the pipe argument must match the request-type direction
bit or control requests may fail depending on the host-controller-driver
implementation.

Fix the four control requests which erroneously used usb_rcvctrlpipe().

Fixes: 1d3e20236d7a ("[PATCH] USB: usbtouchscreen: unified USB touchscreen driver")
Fixes: 24ced062a296 ("usbtouchscreen: add support for DMC TSC-10/25 devices")
Fixes: 9e3b25837a20 ("Input: usbtouchscreen - add support for e2i touchscreen controller")
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable@vger.kernel.org # 2.6.17
Link: https://lore.kernel.org/r/20210524092048.4443-1-johan@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

media: dvb-usb: fix wrong definition

commit c680ed46e418e9c785d76cf44eb33bfd1e8cf3f6 upstream.

syzbot reported WARNING in vmalloc. The problem
was in zero size passed to vmalloc.

The root case was in wrong cxusb_bluebird_lgz201_properties
definition. adapter array has only 1 entry, but num_adapters was
2.

Call Trace:
 __vmalloc_node mm/vmalloc.c:2963 [inline]
 vmalloc+0x67/0x80 mm/vmalloc.c:2996
 dvb_dmx_init+0xe4/0xb90 drivers/media/dvb-core/dvb_demux.c:1251
 dvb_usb_adapter_dvb_init+0x564/0x860 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:184
 dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:86 [inline]
 dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:184 [inline]
 dvb_usb_device_init.cold+0xc94/0x146e drivers/media/usb/dvb-usb/dvb-usb-init.c:308
 cxusb_probe+0x159/0x5e0 drivers/media/usb/dvb-usb/cxusb.c:1634

Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device")
Cc: stable@vger.kernel.org
Reported-by: syzbot+7336195c02c1bd2f64e1@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook 830 G8 Notebook PC

commit dfc2e8ae4066a95c7f9c2bb2dfa26651feaa6b83 upstream.

The HP EliteBook 830 G8 Notebook PC using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210625133414.26760-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Apply LED fixup for HP Dragonfly G1, too

commit 0ac05b25c3dd8299204ae9d50c1c2f7f05eef08f upstream.

HP Dragonfly G1 (SSID 103c:861f) also requires the same quirk for the
mute and mic-mute LED just as Dragonfly G2 model.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213329
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210623122022.26179-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Fix bass speaker DAC mapping for Asus UM431D

commit f8fbcdfb0665de60997d9746809e1704ed782bbc upstream.

Asus Zenbook 14 UM431D has two speaker pins and a headphone pin, and
the auto-parser ends up assigning the bass to the third DAC 0x06.
Although the tone comes out, it's inconvenient because this DAC has no
volume control unlike two other DACs.

For obtaining the volume control for the bass speaker, this patch
enforces the mapping to let both front and bass speaker pins sharing
the same DAC.  It's not ideal but a little bit of improvement.

Since we've already applied the same workaround for another ASUS
machine, we just need to hook the chain to the existing quirk.

BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212547
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210620065952.18948-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Improve fixup for HP Spectre x360 15-df0xxx

commit 434591b2a77def0e78abfa38e5d7c4bca954e68a upstream.

On HP Spectre x360 15-df0xxx, after system boot with plugged headset, the
headset mic are not detected.
Moving pincfg and DAC's config to single fixup function fix this.

[ The actual bug in the original code was that it used a chain to
  ALC286_FIXUP_SPEAKER2_TO_DAC1, and it contains not only the DAC1
  route fix but also another chain to ALC269_FIXUP_THINKPAD_ACPI.
  I thought the latter one is harmless for non-Thinkpad, but it
  doesn't seem so; it contains again yet another chain to
  ALC269_FIXUP_SKI_IGNORE, and this might be bad for some machines,
  including this HP machine.  -- tiwai ]

Signed-off-by: Elia Devito <eliadevito@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210619204105.5682-1-eliadevito@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP EliteBook x360 830 G8

commit c3d2c88209e85045a364e80fe12a6cde16745b72 upstream.

The HP EliteBook x360 830 G8 using ALC285 codec which using 0x04 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210617171422.16652-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: Add another ALC236 variant support

commit 1948fc065a89f18d057b8ffaef6d7242ad99edb8 upstream.

The codec chip 10ec:0230 is another variant of ALC236, combined with a
card reader.  Apply the equivalent setup as 10ec:0236.

BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1184869
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210618161720.28694-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 630 G8

commit fb3acdb2ba289aa06a5a995b3abef409bfe0a220 upstream.

The HP ProBook 630 G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-3-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 445 G8

commit a3b7f9b8fa2967e1b3c2a402301715124c90306b upstream.

The HP ProBook 445 G8 using ALC236 codec.
COEF index 0x34 bit 5 is used to control the playback mute LED, but the
microphone mute LED is controlled using pin VREF instead of a COEF index.
Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-2-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: hda/realtek: fix mute/micmute LEDs for HP ProBook 450 G8

commit 2b70b264d34d398c77a5936e317336f00cf5badb upstream.

The HP ProBook 450 G8 using ALC236 codec which using 0x02 to
control mute LED and 0x01 to control micmute LED.
Therefore, add a quirk to make it works.

Signed-off-by: Andy Chi <andy.chi@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210701091417.9696-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: intel8x0: Fix breakage at ac97 clock measurement

commit 24d1e49415be546470b20429d748e240d0518b7e upstream.

The recent workaround for the wild interrupts in commit c1f0616124c4
("ALSA: intel8x0: Don't update period unless prepared") leaded to a
regression, causing the interrupt storm during ac97 clock measurement
at the driver probe.  We need to handle the interrupt while the clock
measurement as well as the proper PCM streams.

Fixes: c1f0616124c4 ("ALSA: intel8x0: Don't update period unless prepared")
Reported-and-tested-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/CAMo8BfKKMQkcsbOQaeEjq_FsJhdK=fn598dvh7YOcZshUSOH=g@mail.gmail.com
Link: https://lore.kernel.org/r/20210708090738.1569-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

ALSA: usb-audio: scarlett2: Fix wrong resume call

commit 785b6f29a795f109685f286b91e0250c206fbffb upstream.

The current way of the scarlett2 mixer code managing the
usb_mixer_elem_info object is wrong in two ways: it passes its
internal index to the head.id field, and the val_type field is
uninitialized.  This ended up with the wrong execution at the resume
because a bogus unit id is passed wrongly.  Also, in the later code
extensions, we'll have more mixer elements, and passing the index will
overflow the unit id size (of 256).

This patch corrects those issues.  It introduces a new value type,
USB_MIXER_BESPOKEN, which indicates a non-standard mixer element, and
use this type for all scarlett2 mixer elements, as well as
initializing the fixed unit id 0 for avoiding the overflow.

Tested-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/49721219f45b7e175e729b0d9d9c142fd8f4342a.1624379707.git.g@b4.vu
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>