Marco Paniconi [Fri, 20 Nov 2015 18:29:15 +0000 (18:29 +0000)]
Merge "vp9-svc: Fix the setting of is_key_frame."
Alex Converse [Fri, 20 Nov 2015 17:42:05 +0000 (17:42 +0000)]
Merge "Fix a signed shift overflow in vpx_rb_read_inv_signed_literal."
Alex Converse [Fri, 20 Nov 2015 17:41:58 +0000 (17:41 +0000)]
Merge "Fix unsigned overflow in rd_variance_adjustment."
Marco [Fri, 20 Nov 2015 16:44:19 +0000 (08:44 -0800)]
vp9-svc: Fix the setting of is_key_frame.
Change on affects 1 pass CBR.
On key frame, temporal layer_id is reset to 0 for 1 pass CBR,
but since "layer" is reset, the svc.layer_context[layer].is_key_frame
was not correspondingly set properly.
Change-Id: I08f6da0a55ac7429ccfbaddfb7be14479e43543b
Scott LaVarnway [Fri, 20 Nov 2015 15:11:00 +0000 (15:11 +0000)]
Merge "VPX: x86 asm version of vpx_idct32x32_34_add()"
Alex Converse [Thu, 19 Nov 2015 23:04:20 +0000 (15:04 -0800)]
Fix a signed shift overflow in vpx_rb_read_inv_signed_literal.
Found with clang -fsanitize=integer
Change-Id: I17cb2166c06ff463abfaf9b0e6bc749d0d6fdf94
Alex Converse [Thu, 19 Nov 2015 22:53:51 +0000 (14:53 -0800)]
Fix unsigned overflow in rd_variance_adjustment.
Found with clang -fsanitize=integer
Change-Id: I2538e7483cb2d5f06bceecbd3326bdd88bfecfa1
Paul Wilkins [Thu, 19 Nov 2015 16:13:43 +0000 (16:13 +0000)]
Merge "Changes to best quality settings."
Jian Zhou [Thu, 19 Nov 2015 02:32:48 +0000 (02:32 +0000)]
Merge "Speed up tm_predictor_4x4"
Jian Zhou [Sat, 14 Nov 2015 02:42:48 +0000 (18:42 -0800)]
Speed up tm_predictor_4x4
tm_predictor_4x4 is implemented with SSE2 using XMM registers.
Speed up by ~25% in ./test_intra_pred_speed.
Change-Id: I25074b78d476a2cb17f81cf654bdfd80df2070e0
Marco [Wed, 18 Nov 2015 22:29:25 +0000 (14:29 -0800)]
vp9-svc: Fix to key frame counter for spatial layers.
Existing condition only applied to temporal layers.
Change-Id: Icef20a59d0afc61d4e14dea01aff4786fa9e41ae
Paul Wilkins [Wed, 18 Nov 2015 11:10:13 +0000 (11:10 +0000)]
Merge "Changes to exhaustive motion search."
Scott LaVarnway [Wed, 18 Nov 2015 01:42:24 +0000 (17:42 -0800)]
VPX: x86 asm version of vpx_idct32x32_34_add()
Change-Id: Ic81f38998fb1b8d33f5a5d7424c2c41002786cef
Zoe Liu [Tue, 10 Nov 2015 01:21:11 +0000 (17:21 -0800)]
Fixed a few sanity checks.
Change-Id: Ieec4a7be5945dc6de192e2d8292ab978baf47f53
(cherry picked from commit
2096296421c7fa56abb49470c0fbe7c4337b8a71)
paulwilkins [Tue, 17 Nov 2015 16:20:20 +0000 (16:20 +0000)]
Changes to best quality settings.
Small changes to the best quality default speed trade off.
Some speedup settings are worth while even for best quality as they
have only a very small impact on quality but a significant impact on
encode time.
These changes give as much as a further 50-60% increase in encode
speed for my test animations clip with minimal impact on quality.
For this sequence these changes improve the best quality encode speed
to about the same level as good quality speed 0 in Q3 2015 whilst
retaining the large quality gain of over 1 db
For many natural videos though the quality difference from good 0
to best is much smaller.
Change-Id: I28b3840009d77e129817a78a7c41e29cb03e1132
jackychen [Sat, 14 Nov 2015 00:02:43 +0000 (16:02 -0800)]
Enable resize test(down&up) by changing the bitrate.
Change-Id: I5a4f1f7b9de20fbfc28cb743dcd29c0eeca736f8
Marco [Fri, 13 Nov 2015 16:09:17 +0000 (08:09 -0800)]
Reduce sampling time for noise estimate.
Change-Id: I46abd85e2187b8f4c2846416a23fab26d9b9f67d
Marco [Fri, 13 Nov 2015 14:20:41 +0000 (06:20 -0800)]
Fix resize internal test.
Temporary fix to make sure it always passes.
Change-Id: I56a0529986ad7049b6090f871c14e9e06d573d5f
Marco Paniconi [Fri, 13 Nov 2015 14:09:19 +0000 (14:09 +0000)]
Merge "VP9 noise estimation: add frame level motion metrics and adjust thresholds."
paulwilkins [Wed, 14 Oct 2015 09:38:49 +0000 (10:38 +0100)]
Changes to exhaustive motion search.
This change alters the nature and use of exhaustive motion search.
Firstly any exhaustive search is preceded by a normal step search.
The exhaustive search is only carried out if the distortion resulting
from the step search is above a threshold value.
Secondly the simple +/- 64 exhaustive search is replaced by a
multi stage mesh based search where each stage has a range
and step/interval size. Subsequent stages use the best position from
the previous stage as the center of the search but use a reduced range
and interval size.
For example:
stage 1: Range +/- 64 interval 4
stage 2: Range +/- 32 interval 2
stage 3: Range +/- 15 interval 1
This process, especially when it follows on from a normal step
search, has shown itself to be almost as effective as a full range
exhaustive search with step 1 but greatly lowers the computational
complexity such that it can be used in some cases for speeds 0-2.
This patch also removes a double exhaustive search for sub 8x8 blocks
which also contained a bug (the two searches used different distortion
metrics).
For best quality in my test animation sequence this patch has almost
no impact on quality but improves encode speed by more than 5X.
Restricted use in good quality speeds 0-2 yields significant quality gains
on the animation test of 0.2 - 0.5 db with only a small impact on encode
speed. On most clips though the quality gain and speed impact are small.
Change-Id: Id22967a840e996e1db273f6ac4ff03f4f52d49aa
JackyChen [Fri, 13 Nov 2015 02:36:17 +0000 (18:36 -0800)]
VP9 noise estimation: add frame level motion metrics and adjust thresholds.
Change-Id: Ia1aba00603b32cee6835951d3d8f740937cf20f4
James Zern [Fri, 13 Nov 2015 06:49:00 +0000 (06:49 +0000)]
Merge "libs.mk, testdata: rm redundant test of LIBVPX_TEST_DATA"
James Zern [Fri, 13 Nov 2015 06:29:20 +0000 (06:29 +0000)]
Merge "Add AVX vectorized vp9_diamond_search_sad"
Marco [Fri, 13 Nov 2015 00:52:45 +0000 (16:52 -0800)]
Adjust variance threshold for 16x16 split at low resolutions.
Change-Id: I635e37f81237e9703d7d9a11ed76a043f4ec6eb0
Marco Paniconi [Fri, 13 Nov 2015 00:13:32 +0000 (00:13 +0000)]
Revert "Update to noise estimation."
This reverts commit
6b79a1e3e0dfc265f43445b8181aa95e1c02deac.
Change-Id: I5a4923ca8a6de842855ce0725e92567ccbed6fb7
Marco [Thu, 12 Nov 2015 17:06:12 +0000 (09:06 -0800)]
Update to noise estimation.
Add frame level global check and adjust some parameters.
Change-Id: I42103394f2d329781195d94ce6cbb5b3383eea17
Marco Paniconi [Thu, 12 Nov 2015 06:08:38 +0000 (06:08 +0000)]
Merge "Non-rd partition: reduce variance threshold low resolutions."
Marco Paniconi [Thu, 12 Nov 2015 06:06:51 +0000 (06:06 +0000)]
Merge "Adjust varianace threshold for high noise condition."
Marco [Thu, 12 Nov 2015 02:21:20 +0000 (18:21 -0800)]
Adjust motion threshold to limit cyclic refresh.
Change-Id: Icfca27a567eb8929c312c6315856ee130d982a04
Marco [Thu, 12 Nov 2015 02:05:11 +0000 (18:05 -0800)]
Adjust varianace threshold for high noise condition.
Change-Id: I91c722e480328ff95b8c57614d8176ccaceb2539
Marco Paniconi [Wed, 11 Nov 2015 20:40:29 +0000 (20:40 +0000)]
Merge "vp9 denoiser: Add another noise level to denoising."
James Zern [Wed, 11 Nov 2015 20:39:12 +0000 (20:39 +0000)]
Merge "Revert "VPX: x86 asm version of vpx_idct32x32_34_add()""
Marco [Wed, 11 Nov 2015 18:09:40 +0000 (10:09 -0800)]
vp9 denoiser: Add another noise level to denoising.
Change-Id: Idc755ab54e4f78bb7d75bc97634c451804edad99
James Zern [Wed, 11 Nov 2015 19:11:37 +0000 (11:11 -0800)]
Revert "VPX: x86 asm version of vpx_idct32x32_34_add()"
This reverts commit
9aeaa2016e7470c4e316d90da33d883098eed6f4.
This causes some test vectors to fail.
Change-Id: I3659a2068404ec5a0591fba5c88b1bec0c9059a4
James Zern [Wed, 11 Nov 2015 19:09:42 +0000 (11:09 -0800)]
Revert "VP9: Only zero counts when !frame_parallel_decoding_mode"
This reverts commit
380a5519cca999f54b17f37b709996a11f3204ea.
This causes an assertion failure in debug_check_frame_counts() which
probably isn't valid with this change; leaving the investigation for
later now.
Change-Id: Ieda5ca811ed2fa50a0cc6935919a8d10dca996e0
Geza Lore [Wed, 28 Oct 2015 14:35:04 +0000 (14:35 +0000)]
Add AVX vectorized vp9_diamond_search_sad
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I6c2791d43022822a9e6ab43cd124a773946d0bdc
James Zern [Wed, 11 Nov 2015 01:54:51 +0000 (17:54 -0800)]
libs.mk, testdata: rm redundant test of LIBVPX_TEST_DATA
the return value of enabled, which may be empty, is handled by the for
loop. this avoids making an unnecessarily long command line which may
fail in certain cases.
Change-Id: Ib88ecbbe2c0f6d7debb600b4caed4884497263b1
Marco [Tue, 10 Nov 2015 23:41:39 +0000 (15:41 -0800)]
Non-rd partition: reduce variance threshold low resolutions.
Change-Id: I06306905d187948a92f839357df5d21413823808
Marco Paniconi [Tue, 10 Nov 2015 23:10:31 +0000 (23:10 +0000)]
Merge "Add bias to zero/small motion for noisy source."
James Zern [Tue, 10 Nov 2015 22:35:12 +0000 (22:35 +0000)]
Merge "convolve_copy_sse2: replace SSE w/SSE2 code"
Scott LaVarnway [Tue, 10 Nov 2015 21:40:11 +0000 (21:40 +0000)]
Merge "VPX: x86 asm version of vpx_idct32x32_34_add()"
Scott LaVarnway [Tue, 10 Nov 2015 19:54:56 +0000 (11:54 -0800)]
VPX: x86 asm version of vpx_idct32x32_34_add()
Change-Id: I8a933c63b7fbf3c65e2c06dbdca9646cadd0b7cb
Marco [Mon, 9 Nov 2015 21:36:56 +0000 (13:36 -0800)]
Add bias to zero/small motion for noisy source.
Change is only for real-time mode, speed >= 5, and non-screen content mode.
Add bias to zero/low motion for big blocks, if noise estimation
is enabled and noise level is above threshold.
Change-Id: I3a0a4608ede6aa535bda6eca528d20f8aba738e7
James Zern [Thu, 5 Nov 2015 04:01:34 +0000 (20:01 -0800)]
convolve_copy_sse2: replace SSE w/SSE2 code
this should be neutral or slightly faster on modern (P4+) architectures
Change-Id: Iec4c080275941eb8c9e05a66a2daf0405d86a69b
JackyChen [Tue, 10 Nov 2015 03:18:29 +0000 (19:18 -0800)]
VP9 noise estimate: no noise estimate if frame size change.
Change-Id: I521f7b53c143d562a88fe7de330aa3f0ef09f414
Jacky Chen [Tue, 10 Nov 2015 03:05:30 +0000 (03:05 +0000)]
Merge "VP9: add unit test for realtime external resize."
Johann [Tue, 10 Nov 2015 01:00:37 +0000 (17:00 -0800)]
Merge branch 'javanwhistlingduck'
Change-Id: Ib63fde31ae7b3f71e608830f7433113733b2a275
jackychen [Mon, 9 Nov 2015 22:58:14 +0000 (14:58 -0800)]
VP9: add unit test for realtime external resize.
Change-Id: I9bfa80de73847d9be88b6ce9865d7bb5fafaaa57
Jacky Chen [Mon, 9 Nov 2015 22:54:53 +0000 (22:54 +0000)]
Merge "VP9 dynamic resize: enable resize unit test(DownUp)."
James Zern [Mon, 9 Nov 2015 22:23:34 +0000 (22:23 +0000)]
Merge "VP9: Only zero counts when !frame_parallel_decoding_mode"
Johann [Wed, 28 Oct 2015 23:03:55 +0000 (16:03 -0700)]
Release v1.5.0
Javan Whistling Duck release.
Change-Id: If44c9ca16a8188b68759325fbacc771365cb4af8
jackychen [Mon, 9 Nov 2015 22:04:58 +0000 (14:04 -0800)]
VP9 dynamic resize: enable resize unit test(DownUp).
The unit test requires a longer clip which is already in the repo.
Change-Id: Ic42e8d83e636fafd20d485a7f5f8422835319245
Marco Paniconi [Mon, 9 Nov 2015 21:11:51 +0000 (21:11 +0000)]
Merge "VP9 dynamic resize: increase waiting time after key frame."
jackychen [Mon, 9 Nov 2015 19:47:26 +0000 (11:47 -0800)]
VP9 dynamic resize: increase waiting time after key frame.
For 1 pass CBR mode: increase waiting time after key frame
before we start sampling rate control behavior for determining
resize. This change need to disable one internal resize(DownUp)
temporally since it requires a longer clip to do so.
Change-Id: If21beda1be23f169ee541ab4dd642f718347887a
Marco Paniconi [Mon, 9 Nov 2015 19:29:35 +0000 (19:29 +0000)]
Merge "Use same bias (against non-zero mv for big blocks) for speed 5."
Alex Converse [Mon, 9 Nov 2015 18:27:40 +0000 (18:27 +0000)]
Merge "Expand unconstrained nodes in pack_mb_tokens and loop on zeros."
Scott LaVarnway [Mon, 9 Nov 2015 18:14:13 +0000 (10:14 -0800)]
VP9: Only zero counts when !frame_parallel_decoding_mode
The counts are never used when frame_parallel_decoding_mode
is set.
Change-Id: Ic7a566a048297f7373c9ffbb48929ea09eff674f
Marco [Mon, 9 Nov 2015 18:03:27 +0000 (10:03 -0800)]
Use same bias (against non-zero mv for big blocks) for speed 5.
Use same setting for speed 5 (as it is for speed > 5).
Change is only for real-time (non-rd) mode.
Change-Id: I830250eac654328373cb318baa89d4f0e63942e1
James Zern [Sat, 7 Nov 2015 00:57:06 +0000 (00:57 +0000)]
Merge changes I8c83b86d,Ic53b2ed5,I4acc8a84
* changes:
variance_test: create fn pointers w/'&' ref
sixtap_predict_test: create fn pointers w/'&' ref
sad_test: create fn pointers w/'&' ref
Hui Su [Sat, 7 Nov 2015 00:22:50 +0000 (00:22 +0000)]
Merge "Use accurate bit cost for uv_mode in UV intra mode RD selection"
Alex Converse [Tue, 3 Nov 2015 00:28:10 +0000 (16:28 -0800)]
Expand unconstrained nodes in pack_mb_tokens and loop on zeros.
Reduces Linux perf estimated cycle count for pack_mb_tokens on a
lossless encode on my desktop from
61858501855 to
48154040219 or from
26% of the overall profile to 21%.
Change-Id: I9ca3426d7e3272bc7f7030abda4f0d0cec87fb4a
hui su [Fri, 6 Nov 2015 21:56:51 +0000 (13:56 -0800)]
Use accurate bit cost for uv_mode in UV intra mode RD selection
On derflr, +0.1% for VP10; however, -0.03% on VP9.
Change-Id: I09c724232ede74254043d61d3cadc506256af0af
James Zern [Fri, 6 Nov 2015 22:37:20 +0000 (22:37 +0000)]
Merge "Revert "Add AVX vectorized vp9_diamond_search_sad""
James Zern [Fri, 6 Nov 2015 21:03:13 +0000 (13:03 -0800)]
Revert "Add AVX vectorized vp9_diamond_search_sad"
This reverts commit
f1342a7b070ef61b9fbdf03e899ac2107cfcb6bd.
This breaks 32-bit builds:
runtime error: load of misaligned address 0xf72fdd48 for type 'const
__m128i' (vector of 2 'long long' values), which requires 16 byte
alignment
+ _mm_set1_epi64x is incompatible with some versions of visual studio
Change-Id: I6f6fc3c11403344cef78d1c432cdc9147e5c1673
James Zern [Fri, 6 Nov 2015 03:00:45 +0000 (19:00 -0800)]
variance_test: create fn pointers w/'&' ref
this helps some toolchains (vs9) resolve the type of the parameter
Change-Id: I8c83b86da53b1783cd18c0f765b67ba33da91d72
James Zern [Fri, 6 Nov 2015 03:00:45 +0000 (19:00 -0800)]
sixtap_predict_test: create fn pointers w/'&' ref
this helps some toolchains (vs9) resolve the type of the parameter
Change-Id: Ic53b2ed5fbce05c5b5e633b4a4ef9ea75c55360a
Marco [Fri, 6 Nov 2015 16:33:41 +0000 (08:33 -0800)]
vp9: Disable noise estimate on resize trigger frame.
Change-Id: I35767a6320943582ee11d737b5f240cea2d01b25
James Zern [Fri, 6 Nov 2015 03:00:45 +0000 (19:00 -0800)]
sad_test: create fn pointers w/'&' ref
this helps some toolchains (vs9) resolve the type of the parameter
Change-Id: I4acc8a844d1e55b766f66482bd6d32998174d70f
Marco Paniconi [Fri, 6 Nov 2015 06:51:11 +0000 (06:51 +0000)]
Merge "vp9: Updates to noise estimation."
Marco [Fri, 6 Nov 2015 00:00:15 +0000 (16:00 -0800)]
vp9: Updates to noise estimation.
Add threshold/condition on spatial_variance and brightness level.
Modification to normalization of block variance.
Change resolution limit below which we disable noise estimation.
Change-Id: If5be08a26ceda351242d8a58d2f0bc88c0a918f0
James Zern [Thu, 5 Nov 2015 23:22:39 +0000 (15:22 -0800)]
vp9_spatial_svc_encoder.sh: fix command line param
-l -> -sl, renamed in:
be3b08d [svc] Temporal svc with two pass rate control
Change-Id: I5a7b179b33d94e20e54825090659156dece928c0
Yunqing Wang [Thu, 5 Nov 2015 20:17:13 +0000 (20:17 +0000)]
Merge "Add AVX vectorized vp9_diamond_search_sad"
Geza Lore [Wed, 28 Oct 2015 14:35:04 +0000 (14:35 +0000)]
Add AVX vectorized vp9_diamond_search_sad
This function now has an AVX intrinsics version which is about 80%
faster compared to the C implementation. This provides a 2-4% total
speed-up for encode, depending on encoding parameters. The function
utilizes 3 properties of the cost function lookup table, constructed
in 'cal_nmvjointsadcost' and 'cal_nmvsadcosts'.
For the joint cost:
- mvjointsadcost[1] == mvjointsadcost[2] == mvjointsadcost[3]
For the component costs:
- For all i: mvsadcost[0][i] == mvsadcost[1][i]
(equal per component cost)
- For all i: mvsadcost[0][i] == mvsadcost[0][-i]
(Cost function is even)
These must hold, otherwise the AVX version of the function cannot be used.
Change-Id: I184055b864c5a2dc37b2d8c5c9012eb801e9daf6
Marco Paniconi [Wed, 4 Nov 2015 00:01:23 +0000 (00:01 +0000)]
Merge "Bias against non-zero mv for large blocks."
Marco [Fri, 30 Oct 2015 18:51:06 +0000 (11:51 -0700)]
Bias against non-zero mv for large blocks.
Change is only for real-time mode, speed > 5, and non-screen content mode.
Bias is based on block size and motion vector level (motion above some threshold).
Helps to improves stability in background from lightning changes.
PSNR/SSIM metrics on RTC set almost no change/neutral (within +/- 0.1).
Change-Id: I7eac13c1ae10be4ab1f40acc7f9f1df5653ece9d
Marco Paniconi [Tue, 3 Nov 2015 22:40:53 +0000 (22:40 +0000)]
Merge "Update to encoder_breakout_test, for non-rd mode."
Yaowu Xu [Tue, 3 Nov 2015 21:56:25 +0000 (21:56 +0000)]
Merge "Fix a msvc warning"
Hui Su [Tue, 3 Nov 2015 20:55:14 +0000 (20:55 +0000)]
Merge "Generate intra prediction reference values only when necessary"
Marco Paniconi [Tue, 3 Nov 2015 19:54:52 +0000 (19:54 +0000)]
Merge "Adjust threshold for datarate frame drop test."
Marco [Tue, 3 Nov 2015 19:47:23 +0000 (11:47 -0800)]
Update to encoder_breakout_test, for non-rd mode.
Only use non-zero threshold(s) for breakout if
the motion level of the current tested mode is low.
Change-Id: I22aae961cc42371b49d3f648560181cc54708502
Yaowu Xu [Tue, 3 Nov 2015 19:22:58 +0000 (11:22 -0800)]
Fix a msvc warning
Change-Id: Id5b8f597fb275395232559fea7bfeb56912b88a1
Alex Converse [Tue, 3 Nov 2015 17:52:34 +0000 (17:52 +0000)]
Merge "misc fixes: Remove a wasted value."
Alex Converse [Tue, 3 Nov 2015 17:50:34 +0000 (17:50 +0000)]
Merge "Add target for Mac OS X 10.11 'El Capitan'"
Marco [Tue, 3 Nov 2015 16:15:04 +0000 (08:15 -0800)]
Adjust threshold for datarate frame drop test.
Current threshold is little too strict.
Change-Id: I99ec1409d095e0c2fd3b7ab398742cabcc05700b
Jacky Chen [Mon, 2 Nov 2015 23:37:23 +0000 (23:37 +0000)]
Merge "vpx_scale: fix the issue in msan test."
Alex Converse [Mon, 2 Nov 2015 22:05:37 +0000 (14:05 -0800)]
Add target for Mac OS X 10.11 'El Capitan'
Change-Id: I174f5b41be384894e41b8e2926cbf8fd0f8e21b2
Marco Paniconi [Mon, 2 Nov 2015 22:08:01 +0000 (22:08 +0000)]
Merge "Move noise level estimate outside denoiser."
jackychen [Fri, 30 Oct 2015 18:08:23 +0000 (11:08 -0700)]
vpx_scale: fix the issue in msan test.
Do memset to fix msan issue due to the access of uninitialized
memory.
BUG=https://code.google.com/p/chromium/issues/detail?id=549155
Change-Id: I02f995ede79e3574e72587cc078df1a0d11af002
Marco [Sun, 1 Nov 2015 22:40:05 +0000 (14:40 -0800)]
Move noise level estimate outside denoiser.
Source noise level estimate is also useful for
setting variance encoder parameters (variance thresholds,
qp-delta, mode selection, etc), so allow it to be used also
if denoising is not on.
Change-Id: I4fe23d47607b4e17a35287057f489c29114beed1
hui su [Mon, 2 Nov 2015 19:11:25 +0000 (11:11 -0800)]
Move palette-based intra prediction out of misc-fixes
Change-Id: Ia59724413c4a4831390119a33d40a7d713b4b69f
hui su [Sat, 31 Oct 2015 00:15:49 +0000 (17:15 -0700)]
Generate intra prediction reference values only when necessary
This can help increase encoding speed substantially.
Change-Id: Id0c009146e6e74d9365add71c7b10b9a57a84676
Marco [Mon, 2 Nov 2015 17:10:01 +0000 (09:10 -0800)]
vp9 denoiser: Don't estimate noise on resized trigger frame.
Change-Id: I60461f011d1aba0b1eb6584c6940f745221915f4
James Zern [Thu, 29 Oct 2015 23:42:26 +0000 (16:42 -0700)]
vp9_dx_iface: move struct defs to separate header
this avoids redefining vpx_codec_vp9_dx, vpx_codec_vp9_dx_algo in
vp9_encoder_parms_get_to_decoder.cc
Change-Id: I3b89e7a62497227ee32419f1a7d30e4c10a13c05
(cherry picked from commit
ca163b85bb13fc07df3e1be60d4e4b71c8e83090)
James Zern [Thu, 29 Oct 2015 23:41:25 +0000 (16:41 -0700)]
vp9_decodeframe.h: add missing include
Change-Id: I8ef772a016a79cab88bee8e9739530aa030baaa9
(cherry picked from commit
68ecfc1e62408800611ed96c37949d65b7f25cf7)
Debargha Mukherjee [Fri, 30 Oct 2015 20:57:10 +0000 (20:57 +0000)]
Merge "Convert motion search config from AoS to SoA"
James Zern [Fri, 30 Oct 2015 05:50:58 +0000 (05:50 +0000)]
Merge changes I3b89e7a6,I8ef772a0
* changes:
vp9_dx_iface: move struct defs to separate header
vp9_decodeframe.h: add missing include
James Zern [Thu, 29 Oct 2015 23:42:26 +0000 (16:42 -0700)]
vp9_dx_iface: move struct defs to separate header
this avoids redefining vpx_codec_vp9_dx, vpx_codec_vp9_dx_algo in
vp9_encoder_parms_get_to_decoder.cc
Change-Id: I3b89e7a62497227ee32419f1a7d30e4c10a13c05
Alex Converse [Fri, 30 Oct 2015 00:37:33 +0000 (00:37 +0000)]
Merge "Make the zero handling in extend_to_full_distribution more explicit."
James Zern [Thu, 29 Oct 2015 23:41:25 +0000 (16:41 -0700)]
vp9_decodeframe.h: add missing include
Change-Id: I8ef772a016a79cab88bee8e9739530aa030baaa9
hui su [Thu, 29 Oct 2015 22:53:20 +0000 (15:53 -0700)]
Specify feasible parameter values for lossless mode
Change-Id: I53d9719dcb81fa83fe3c920a552db5a0f1cacefa