Hongtao Liu [Sun, 27 Oct 2019 04:39:31 +0000 (04:39 +0000)]
Remove redudant <iptr> when operand already has scalar mode.
gcc/
* config/i386/sse.md (*<sse>_vm<plusminus_insn><mode>3,
<sse>_vm<multdiv_mnemonic><mode>3): Remove <iptr> since
operand is already scalar mode.
(iptr): Remove SF/DF.
From-SVN: r277481
GCC Administrator [Sun, 27 Oct 2019 00:16:46 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r277480
Gerald Pfeifer [Sat, 26 Oct 2019 21:57:56 +0000 (21:57 +0000)]
codecvt.xml: Switch pubs.opengroup.org to https.
* doc/xml/manual/codecvt.xml: Switch pubs.opengroup.org to https.
* doc/xml/manual/locale.xml (LC_ALL): Ditto.
* doc/xml/manual/messages.xml: Ditto.
From-SVN: r277476
John David Anglin [Sat, 26 Oct 2019 20:12:20 +0000 (20:12 +0000)]
baseline_symbols.txt: Update.
* config/abi/post/hppa-linux-gnu/baseline_symbols.txt: Update.
From-SVN: r277475
Segher Boessenkool [Sat, 26 Oct 2019 16:38:59 +0000 (18:38 +0200)]
rs6000: Fix allocate_stack in a corner case (PR91289)
When we have -fstack-limit-symbol with sysv we can end up with a non-
existing instruction (you cannot add an immediate to register 0). Fix
this by using register 11 instead. It might be used for something else
already though, so save and restore its value around this. In
optimizing compiles these extra moves are usually removed again: the
restore by cprop_hardreg, and then the save by rtl_dce.
PR target/91289
* config/rs6000/rs6000-logue.c (rs6000_emit_allocate_stack): Don't add
an immediate to r0; use r11 instead. Save and restore r11 to r0 around
this.
From-SVN: r277472
Hongtao Liu [Sat, 26 Oct 2019 02:40:19 +0000 (02:40 +0000)]
Adjust predicates and constraints of scalar insns.
Changelog
gcc/
* config/i386/sse.md
(<sse>_vm<plusminus_insn><mode>3<mask_scalar_name><round_scalar_name>,
<sse>_vm<multdiv_mnemonic><mode>3<mask_scalar_name><round_scalar_name>,
<sse>_vmsqrt<mode>2<mask_scalar_name><round_scalar_name>,
<sse>_vm<code><mode>3<mask_scalar_name><round_saeonly_scalar_name>,
<sse>_vmmaskcmp<mode>3):
Change predicates from vector_operand to nonimmediate_operand,
constraints xBm to xm, since scalar operations don't need
memory address alignment.
(avx512f_vmcmp<mode>3<round_saeonly_name>,
avx512f_vmcmp<mode>3_mask<round_saeonly_name>): Replace
round_saeonly_nimm_predicate with
round_saeonly_nimm_scalar_predicate.
(fmai_vmfmadd_<mode><round_name>, fmai_vmfmsub_<mode><round_name>,
fmai_vmfnmadd_<mode><round_name>,fmai_vmfnmsub_<mode><round_name>,
*fmai_fmadd_<mode>, *fmai_fmsub_<mode>,
*fmai_fnmadd_<mode><round_name>, *fmai_fnmsub_<mode><round_name>,
avx512f_vmfmadd_<mode>_mask3<round_name>,
avx512f_vmfmadd_<mode>_maskz_1<round_name>,
*avx512f_vmfmsub_<mode>_mask<round_name>,
avx512f_vmfmsub_<mode>_mask3<round_name>,
*avx512f_vmfmsub_<mode>_maskz_1<round_name>,
*avx512f_vmfnmadd_<mode>_mask<round_name>,
*avx512f_vmfnmadd_<mode>_mask3<round_name>,
*avx512f_vmfnmadd_<mode>_maskz_1<round_name>,
*avx512f_vmfnmsub_<mode>_mask<round_name>,
*avx512f_vmfnmsub_<mode>_mask3<round_name>,
*avx512f_vmfnmsub_<mode>_maskz_1<round_name>,
cvtusi2<ssescalarmodesuffix>32<round_name>,
cvtusi2<ssescalarmodesuffix>64<round_name>, ): Replace
round_nimm_predicate with round_nimm_scalr_predicate.
(avx512f_sfixupimm<mode><sd_maskz_name><round_saeonly_name>,
avx512f_sfixupimm<mode>_mask<round_saeonly_name>,
avx512er_vmrcp28<mode><round_saeonly_name>,
avx512er_vmrsqrt28<mode><round_saeonly_name>,
): Replace round_saeonly_nimm_predicate with
round_saeonly_nimm_scalar_predicate.
(avx512dq_vmfpclass<mode><mask_scalar_merge_name>): Replace
vector_operand with nonimmediate_operand.
* config/i386/subst.md (round_scalar_nimm_predicate,
round_saeonly_scalar_nimm_predicate): Replace
vector_operand with nonimmediate_operand.
From-SVN: r277470
Hongtao Liu [Sat, 26 Oct 2019 02:34:34 +0000 (02:34 +0000)]
Fix false dependence of scalar operation vrcp/vsqrt/vrsqrt/vrndscale
For instructions with xmm operand:
op %xmmN,%xmmQ,%xmmQ ----> op %xmmN, %xmmN, %xmmQ
for instruction with mem operand or gpr operand:
op mem/gpr, %xmmQ, %xmmQ
---> using pass rpad ---->
xorps %xmmN, %xmmN, %xxN
op mem/gpr, %xmmN, %xmmQ
Performance influence of SPEC2017 fprate which is tested on SKX
----
503.bwaves_r -0.03%
507.cactuBSSN_r -0.22%
508.namd_r -0.02%
510.parest_r 0.37%
511.povray_r 0.74%
519.lbm_r 0.24%
521.wrf_r 2.35%
526.blender_r 0.71%
527.cam4_r 0.65%
538.imagick_r 0.95%
544.nab_r -0.37
549.fotonik3d_r 0.24%
554.roms_r 0.90%
fprate geomean 0.50%
-----
Changelog
gcc/
* config/i386/i386.md (*rcpsf2_sse): Add
avx_partial_xmm_update, prefer m constraint for TARGET_AVX.
(*rsqrtsf2_sse): Ditto.
(*sqrt<mode>2_sse): Ditto.
(sse4_1_round<mode>2): separate constraint vm, add
avx_partail_xmm_update, prefer m constraint for TARGET_AVX.
* config/i386/sse.md (*sse_vmrcpv4sf2"): New define_insn used
by pass rpad.
(*<sse>_vmsqrt<mode>2<mask_scalar_name><round_scalar_name>*):
Ditto.
(*sse_vmrsqrtv4sf2): Ditto.
(*avx512f_rndscale<mode><round_saeonly_name>): Ditto.
(*sse4_1_round<ssescalarmodesuffix>): Ditto.
(sse4_1_round<ssescalarmodesuffix>): Add m constraint and
<iptr> pointer size modifier since vround support memory operand.
gcc/testsuite
* gcc.target/i386/pr87007-4.c: New test.
* gcc.target/i386/pr87007-5.c: Ditto.
From-SVN: r277469
GCC Administrator [Sat, 26 Oct 2019 00:17:04 +0000 (00:17 +0000)]
Daily bump.
From-SVN: r277468
Marek Polacek [Fri, 25 Oct 2019 19:11:58 +0000 (19:11 +0000)]
PR c++/91581 - ICE in exception-specification of defaulted ctor.
* g++.dg/cpp0x/noexcept55.C: New test.
From-SVN: r277462
Jonathan Wakely [Fri, 25 Oct 2019 17:02:43 +0000 (18:02 +0100)]
Use implicitly-defined copy operations for test iterators
All of these special member functions do exactly what the compiler would
do anyway. By defining them as defaulted for C++11 and later we prevent
move constructors and move assignment operators being defined (which is
consistent with the previous semantics).
Also move default init of the input_iterator_wrapper members from the
derived constructor to the protected base constructor.
* testsuite/util/testsuite_iterators.h (output_iterator_wrapper)
(input_iterator_wrapper, forward_iterator_wrapper)
bidirectional_iterator_wrapper, random_access_iterator_wrapper): Remove
user-provided copy constructors and copy assignment operators so they
are defined implicitly.
(input_iterator_wrapper): Initialize members in default constructor.
(forward_iterator_wrapper): Remove assignments to members of base.
From-SVN: r277459
Jonathan Wakely [Fri, 25 Oct 2019 17:02:35 +0000 (18:02 +0100)]
Fix compilation with Clang
The new constexpr destructor on std::allocator breaks compilation with
Clang in C++2a mode. This only makes it constexpr if the compiler
supports the P0784R7 features.
* include/bits/allocator.h: Check __cpp_constexpr_dynamic_alloc
before making the std::allocator destructor constexpr.
* testsuite/20_util/allocator/requirements/constexpr.cc: New test.
From-SVN: r277458
Georg-Johann Lay [Fri, 25 Oct 2019 15:13:23 +0000 (15:13 +0000)]
re PR target/85969 (avr/gen-avr-mmcu-specs.c:56: unused function ?)
PR target/85969
* config/avr/gen-avr-mmcu-specs.c (str_prefix_p): Remove unused
static function.
From-SVN: r277455
Cesar Philippidis [Fri, 25 Oct 2019 14:28:40 +0000 (07:28 -0700)]
[Fortran] OpenACC – permit common blocks in some clauses
2019-10-25 Cesar Philippidis <cesar@codesourcery.com>
Tobias Burnus <tobias@codesourcery.com>
gcc/fortran/
* openmp.c (gfc_match_omp_map_clause): Add and pass allow_commons
argument.
(gfc_match_omp_clauses): Update calls to permit common blocks for
OpenACC's copy/copyin/copyout, create/delete, host,
pcopy/pcopy_in/pcopy_out, present_or_copy, present_or_copy_in,
present_or_copy_out, present_or_create and self.
gcc/
* gimplify.c (oacc_default_clause): Privatize fortran common blocks.
(omp_notice_variable): Defer the expansion of DECL_VALUE_EXPR for
common block decls.
gcc/testsuite/
* gfortran.dg/goacc/common-block-1.f90: New test.
* gfortran.dg/goacc/common-block-2.f90: New test.
* gfortran.dg/goacc/common-block-3.f90: New test.
libgomp/
* testsuite/libgomp.oacc-fortran/common-block-1.f90: New test.
* testsuite/libgomp.oacc-fortran/common-block-2.f90: New test.
* testsuite/libgomp.oacc-fortran/common-block-3.f90: New test.
Reviewed-by: Thomas Schwinge <thomas@codesourcery.com>
Co-Authored-By: Tobias Burnus <tobias@codesourcery.com>
From-SVN: r277451
David Edelsohn [Fri, 25 Oct 2019 14:03:11 +0000 (14:03 +0000)]
pr70100.c: Add -mvsx.
* gcc.target/powerpc/pr70100.c: Add -mvsx.
Allow AIX ABI function name.
From-SVN: r277450
Jonathan Wakely [Fri, 25 Oct 2019 13:29:37 +0000 (14:29 +0100)]
Guard use of concepts with feature test macro
This fixes a regression when using Clang.
* include/bits/range_cmp.h: Check __cpp_lib_concepts before defining
concepts. Fix comment.
From-SVN: r277449
Richard Biener [Fri, 25 Oct 2019 13:03:56 +0000 (13:03 +0000)]
re PR tree-optimization/92222 (ice in useless_type_conversion_p, at gimple-expr.c:86)
2019-10-25 Richard Biener <rguenther@suse.de>
PR tree-optimization/92222
* tree-vect-slp.c (_slp_oprnd_info::first_pattern): Remove.
(_slp_oprnd_info::second_pattern): Likewise.
(_slp_oprnd_info::any_pattern): New.
(vect_create_oprnd_info): Adjust.
(vect_get_and_check_slp_defs): Compute whether any stmt is
in a pattern.
(vect_build_slp_tree_2): Avoid building up a node from scalars
if any of the operand defs, not just the first, is in a pattern.
* gcc.dg/torture/pr92222.c: New testcase.
From-SVN: r277448
Richard Biener [Fri, 25 Oct 2019 12:25:52 +0000 (12:25 +0000)]
tree-vect-slp.c (vect_get_and_check_slp_defs): Only fail swapping if we actually have to modify the IL on a shared stmt.
2019-10-25 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): Only fail
swapping if we actually have to modify the IL on a shared stmt.
(vect_build_slp_tree_2): Never fail swapping on shared stmts
because we no longer modify the IL.
From-SVN: r277446
Richard Sandiford [Fri, 25 Oct 2019 09:16:59 +0000 (09:16 +0000)]
Fix failure in gcc.target/sve/reduc_strict_3.c
Unwanted unrolling meant that we had more single-precision FADDAs
than expected.
2019-10-25 Richard Sandiford <richard.sandiford@arm.com>
gcc/testsuite/
* gcc.target/aarch64/sve/reduc_strict_3.c (double_reduc1): Prevent
the loop from being unrolled.
From-SVN: r277442
Richard Sandiford [Fri, 25 Oct 2019 09:13:55 +0000 (09:13 +0000)]
Update SVE tests for recent XPASSes
Recent target-independent patches mean that several SVE tests
now produce the code that we'd originally wanted them to produce.
Really nice to see :-)
This patch therefore updates the expected baseline, so that hopefully
we don't regress from this point in future.
2019-10-25 Richard Sandiford <richard.sandiford@arm.com>
gcc/testsuite/
* gcc.target/aarch64/sve/loop_add_5.c: Remove XFAILs for tests
that now pass.
* gcc.target/aarch64/sve/reduc_1.c: Likewise.
* gcc.target/aarch64/sve/reduc_2.c: Likewise.
* gcc.target/aarch64/sve/reduc_5.c: Likewise.
* gcc.target/aarch64/sve/reduc_8.c: Likewise.
* gcc.target/aarch64/sve/slp_13.c: Likewise.
* gcc.target/aarch64/sve/slp_5.c: Likewise. Update expected
WHILELO counts.
* gcc.target/aarch64/sve/slp_7.c: Likewise.
From-SVN: r277441
Martin Liska [Fri, 25 Oct 2019 09:13:12 +0000 (11:13 +0200)]
Fix typo in dump_tree_statistics.
2019-10-25 Martin Liska <mliska@suse.cz>
* tree.c (dump_tree_statistics): Use sorted index 'j' and not 'i'.
From-SVN: r277440
Richard Sandiford [Fri, 25 Oct 2019 08:22:13 +0000 (08:22 +0000)]
Fix reductions for fully-masked loops
Now that vectorizable_operation vectorises most loop stmts involved
in a reduction, it needs to be aware of reductions in fully-masked loops.
The LOOP_VINFO_CAN_FULLY_MASK_P parts of vectorizable_reduction now only
apply to cases that use vect_transform_reduction.
This new way of doing things is definitely an improvement for SVE though,
since it means we can lift the old restriction of not using fully-masked
loops for reduction chains.
2019-10-25 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* tree-vect-loop.c (vectorizable_reduction): Restrict the
LOOP_VINFO_CAN_FULLY_MASK_P handling to cases that will be
handled by vect_transform_reduction. Allow fully-masked loops
to be used with reduction chains.
* tree-vect-stmts.c (vectorizable_operation): Handle reduction
operations in fully-masked loops.
(vectorizable_condition): Reject EXTRACT_LAST_REDUCTION
operations in fully-masked loops.
gcc/testsuite/
* gcc.dg/vect/pr65947-1.c: No longer expect doubled dump lines
for FOLD_EXTRACT_LAST reductions.
* gcc.dg/vect/pr65947-2.c: Likewise.
* gcc.dg/vect/pr65947-3.c: Likewise.
* gcc.dg/vect/pr65947-4.c: Likewise.
* gcc.dg/vect/pr65947-5.c: Likewise.
* gcc.dg/vect/pr65947-6.c: Likewise.
* gcc.dg/vect/pr65947-9.c: Likewise.
* gcc.dg/vect/pr65947-10.c: Likewise.
* gcc.dg/vect/pr65947-12.c: Likewise.
* gcc.dg/vect/pr65947-13.c: Likewise.
* gcc.dg/vect/pr65947-14.c: Likewise.
* gcc.dg/vect/pr80631-1.c: Likewise.
* gcc.dg/vect/pr80631-2.c: Likewise.
* gcc.dg/vect/vect-cond-reduc-3.c: Likewise.
* gcc.dg/vect/vect-cond-reduc-4.c: Likewise.
From-SVN: r277438
Richard Biener [Fri, 25 Oct 2019 08:08:44 +0000 (08:08 +0000)]
tree-vect-loop.c (vectorizable_reduction): Verify STMT_VINFO_REDUC_IDX on the to be vectorized stmts is set up correctly.
2019-10-25 Richard Biener <rguenther@suse.de>
* tree-vect-loop.c (vectorizable_reduction): Verify
STMT_VINFO_REDUC_IDX on the to be vectorized stmts is set up
correctly.
* tree-vect-patterns.c (vect_mark_pattern_stmts): Transfer
STMT_VINFO_REDUC_IDX from the original stmts to the pattern
stmts.
From-SVN: r277437
Gerald Pfeifer [Fri, 25 Oct 2019 05:37:34 +0000 (05:37 +0000)]
policy_data_structures_biblio.xml: Switch pubs.opengroup.org to https.
* doc/xml/manual/policy_data_structures_biblio.xml: Switch
pubs.opengroup.org to https.
From-SVN: r277436
Gerald Pfeifer [Fri, 25 Oct 2019 05:19:50 +0000 (05:19 +0000)]
* doc/xml/gnu/gpl-3.0.xml: Switch gnu.org to https.
From-SVN: r277435
Edward Smith-Rowland [Fri, 25 Oct 2019 01:44:10 +0000 (01:44 +0000)]
status_cxx2020.xml: Add rows and update status.
2019-09-09 Edward Smith-Rowland <3dw4rd@verizon.net>
* doc/xml/manual/status_cxx2020.xml: Add rows and update status.
From-SVN: r277434
GCC Administrator [Fri, 25 Oct 2019 00:17:12 +0000 (00:17 +0000)]
Daily bump.
From-SVN: r277433
Jakub Jelinek [Thu, 24 Oct 2019 22:29:09 +0000 (00:29 +0200)]
gimplify.h (omp_construct_selector_matches): Declare.
* gimplify.h (omp_construct_selector_matches): Declare.
* gimplify.c (struct gimplify_omp_ctx): Add code member.
(gimplify_call_expr): Call omp_resolve_declare_variant and remap
called function if needed for flag_openmp.
(gimplify_scan_omp_clauses): Set ctx->code.
(omp_construct_selector_matches): New function.
* omp-general.h (omp_constructor_traits_to_codes,
omp_context_selector_matches, omp_resolve_declare_variant): Declare.
* omp-general.c (omp_constructor_traits_to_codes,
omp_context_selector_matches, omp_resolve_declare_variant): New
functions.
c-family/
* c-common.h (c_omp_context_selector_matches): Remove.
* c-omp.c (c_omp_context_selector_matches): Remove.
* c-attribs.c (c_common_attribute_table): Add
"omp declare target {host,nohost,block}" attributes.
c/
* c-parser.c (c_finish_omp_declare_variant): Use
omp_context_selector_matches instead of
c_omp_context_selector_matches.
* c-decl.c (c_decl_attributes): Add "omp declare target block"
attribute in between declare target and end declare target
pragmas.
cp/
* decl2.c (cplus_decl_attributes): Add "omp declare target block"
attribute in between declare target and end declare target
pragmas.
testsuite/
* c-c++-common/gomp/declare-variant-8.c: New test.
From-SVN: r277427
Jakub Jelinek [Thu, 24 Oct 2019 22:27:10 +0000 (00:27 +0200)]
arc.c (hwloop_optimize): Add missing space in string literal.
* config/arc/arc.c (hwloop_optimize): Add missing space in string
literal.
* config/rx/rx.c (rx_print_operand): Likewise.
* tree-vect-data-refs.c (vect_analyze_data_refs): Likewise.
* tree-ssa-loop-ch.c (should_duplicate_loop_header_p): Likewise.
* ipa-sra.c (create_parameter_descriptors, process_scan_results):
Likewise.
* genemit.c (emit_c_code): Likewise.
* plugin.c (try_init_one_plugin): Likewise. Formatting fix.
cp/
* call.c (convert_arg_to_ellipsis): Add missing space in string
literal.
From-SVN: r277426
Jan Hubicka [Thu, 24 Oct 2019 22:24:42 +0000 (00:24 +0200)]
symbols-summary.h (fast_function_summary<T *, [...]): Free m_vector.
* symbols-summary.h (fast_function_summary<T *, V>::release,
fast_call_summary<T *, V>::release): Free m_vector.
From-SVN: r277425
Jan Hubicka [Thu, 24 Oct 2019 22:19:09 +0000 (00:19 +0200)]
cgraphunit.c (symbol_table::process_new_functions): Call ipa_free_size_summary.
* cgraphunit.c (symbol_table::process_new_functions): Call
ipa_free_size_summary.
* ipa-cp.c (ipcp_cloning_candidate_p): Update.
(devirtualization_time_bonus): Update.
(ipcp_propagate_stage): Update.
* ipa-fnsummary.c (ipa_size_summaries): New.
(ipa_fn_summary_alloc): Alloc size summary.
(dump_ipa_call_summary): Update.
(ipa_dump_fn_summary): Update.
(analyze_function_body): Update.
(compute_fn_summary): Likewise.
(ipa_get_stack_frame_offset): New function.
(inline_update_callee_summaries): Do not update frame offsets.
(ipa_merge_fn_summary_after_inlining): Update frame offsets here;
remove call and function summary.
(ipa_update_overall_fn_summary): Update.
(inline_read_section): Update.
(ipa_fn_summary_write): Update.
(ipa_free_fn_summary): Do not remove summaries.
(ipa_free_size_summary): New.
(release summary pass): Also run at WPA.
* ipa-fnsummary.h (ipa_size_summary): Declare.
(ipa_fn_summary): Remove size, self_size, stack_frame_offset,
estimated_self_stack_size.
(ipa_size_summary_t): New type.
(ipa_size_summaries): Declare.
(ipa_free_size_summary): Declare.
(ipa_get_stack_frame_offset): Declare.
* ipa-icf.c (sem_function::merge): Update.
* ipa-inline-analysis.c (estimate_size_after_inlining): Update.
(estimate_growth): Update.
(growth_likely_positive): Update.
(clone_inlined_nodes): Update.
(inline_call): Update.
* ipa-inline.c (caller_growth_limits): Update.
(edge_badness): Update.
(recursive_inlining): Update.
(inline_small_functions): Update.
(inline_to_all_callers_1): Update.
* ipa-prop.h (ipa_edge_args_sum_t): Update comment.
* lto-partition.c (add_symbol_to_partition_1): Update.
(undo_parittion): Update.
From-SVN: r277424
Segher Boessenkool [Thu, 24 Oct 2019 18:22:33 +0000 (20:22 +0200)]
rs6000: Implement [u]avg<mode>3_ceil
We already had those in fact, just under other names. Use the standard
names so that the vectorizer can use it.
* config/rs6000/altivec.md (altivec_vavgu<VI_char>): Rename to...
(uavg<mode>3_ceil): ... This.
(altivec_vavgs<VI_char>): Rename to...
(avg<mode>3_ceil): ... This.
* config/rs6000/rs6000-builtin.def (VAVGUB, VAVGSB, VAVGUH, VAVGSH,
VAVGUW, VAVGSW): Adjust.
From-SVN: r277421
Marek Polacek [Thu, 24 Oct 2019 17:22:27 +0000 (17:22 +0000)]
Add missing space to diagnostic in reshape_init_r.
* decl.c (reshape_init_r): Add missing space.
From-SVN: r277419
Nathan Sidwell [Thu, 24 Oct 2019 16:11:42 +0000 (16:11 +0000)]
[C++ PATCH] Template parm index fix
https://gcc.gnu.org/ml/gcc-patches/2019-10/msg01761.html
* pt.c (reduce_template_parm_level): Attach the new TPI to the new
DECL.
(convert_generic_types_to_packs): Pass the copied type to
reduce_template_parm_level.
From-SVN: r277416
Nathan Sidwell [Thu, 24 Oct 2019 16:03:26 +0000 (16:03 +0000)]
[dump] small source cleanup
https://gcc.gnu.org/ml/gcc-patches/2019-10/msg01760.html
* dumpfile.c (dump_begin): Reorder decls to use RAII.
From-SVN: r277415
Jonathan Wakely [Thu, 24 Oct 2019 15:29:41 +0000 (16:29 +0100)]
Revert ABI changes to std::allocator in C++20
The recent C++20 changes to remove the std::allocator<void> explicit
specialization and the destructor in the std::allocator primary template
change the result of some is_trivially_xxx type traits. To avoid those
changes, this patch restores the explicit specialization and the
destructor.
In order to meet the C++20 requirements the std::allocator<void>
explicit specialization must provide the same interface as the primary
template (except for the unusable allocate and deallocate member
functions) and the destructor in the primary template must be constexpr.
* include/bits/allocator.h (allocator<void>): Restore the explicit
specialization for C++20, but make its API consistent with the primary
template.
(allocator::~allocator()): Restore the destructor for C++20, but make
it constexpr.
* testsuite/20_util/allocator/rebind_c++20.cc: Check allocator<void>.
* testsuite/20_util/allocator/requirements/typedefs_c++20.cc: Likewise.
* testsuite/20_util/allocator/void.cc: Check that constructors and
destructors are trivial. Check for converting constructor in C++20.
* testsuite/ext/malloc_allocator/variadic_construct.cc: Simplify
dejagnu target selector.
* testsuite/ext/new_allocator/variadic_construct.cc: Likewise.
From-SVN: r277410
Andreas Krebbel [Thu, 24 Oct 2019 15:26:05 +0000 (15:26 +0000)]
ipa-sra-19.c: Avoid unprototyped function
Power and IBM Z require a function prototype if a vector argument is
passed. Complete the prototype of k to prevent errors from being
triggered on these platforms
gcc/testsuite/ChangeLog:
2019-10-24 Andreas Krebbel <krebbel@linux.ibm.com>
* gcc.dg/ipa/ipa-sra-19.c: Remove dg-skip-if. Add argument type to
prototype of k.
From-SVN: r277409
Martin Liska [Thu, 24 Oct 2019 15:08:30 +0000 (17:08 +0200)]
Make gt_pch_nx unreachable in symbol-summary classes.
2019-10-24 Martin Liska <mliska@suse.cz>
* symbol-summary.h (gt_pch_nx): Mark all functions
with gcc_unreachable as we do not expect to be called.
From-SVN: r277408
Andrew Sutton [Thu, 24 Oct 2019 15:03:49 +0000 (15:03 +0000)]
Finish moving constraint and logic functionality of out pt.c.
Also, reimplement and re-enable subsumption caching.
gcc/cp/
* config-lang.in (gtfiles): Add logic.cc.
* constraint.cc (atomic_constraints_identical_p): Add assertions.
(hash_atomic_constraint): Likewise.
(constraints_equivalent_p): New.
(inchash::add_constraint): New.
(iterative_hash_constraint): New.
(decl_constraints): Moved from pt.c.
(get_constraints): Likewise.
(set_constraints): Likewise.
(remove_constraints): Likewise.
* cp-tree.h (CONSTR_P): New.
(init_constraint_processing): Remove.
(constraints_equivalent_p, iterative_hash_constraint): Declare.
* decl.c (cxx_init_decl_processing): Don't initialize constraints.
* logic.cc (subsumption_entry): Moved from pt.c.
(subsumption_hasher): Likewise.
(subsumption_cache): Likewise.
(lookup_subsumption): Likewise.
(save_subsumption): Likewise.
(subsumes_constraints_nonnull): Use subsumption cache.
* pt.c: Move aforementioned declarations out of this file.
(init_constraint_processing): Remove.
From-SVN: r277407
Richard Biener [Thu, 24 Oct 2019 15:01:45 +0000 (15:01 +0000)]
tree-vect-slp.c (vect_get_and_check_slp_defs): For reduction chains try harder with operand swapping and instead of putting a...
2019-10-24 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_get_and_check_slp_defs): For reduction
chains try harder with operand swapping and instead of
putting a shifted chain into the reduction operands put
a repetition of the final reduction op there as if we'd
reassociate the expression.
* gcc.dg/vect/slp-reduc-10a.c: New testcase.
* gcc.dg/vect/slp-reduc-10b.c: Likewise.
* gcc.dg/vect/slp-reduc-10c.c: Likewise.
* gcc.dg/vect/slp-reduc-10d.c: Likewise.
* gcc.dg/vect/slp-reduc-10e.c: Likewise.
From-SVN: r277406
Jonathan Wakely [Thu, 24 Oct 2019 14:39:57 +0000 (15:39 +0100)]
Simplify common case of use_future_t that uses std::allocator
There is no need to store and pass around the allocator object when it's
an instance of std::allocator. Define a partial specialization of
std::use_future_t and the corresponding completion token so that no
allocator is stored. Overload the completion handler constructor to not
expect an allocator to be stored.
* include/experimental/executor (__use_future_ct, use_future_t):
Define partial specializations for std::allocator.
(__use_future_ch): Overload constructor for completion tokens using
std::allocator.
From-SVN: r277404
Jan Hubicka [Thu, 24 Oct 2019 14:19:40 +0000 (16:19 +0200)]
ipa-reference.c (ipa_reference_optimization_summary_d): Rename statics_not_read and statics_not_written to statics_read and...
* ipa-reference.c (ipa_reference_optimization_summary_d): Rename
statics_not_read and statics_not_written to statics_read and
statics_written respectively.
(no_module_statics): New static var.
(ipa_reference_get_not_read_global): Rename to ...
(ipa_reference_get_read_global): ... this.
(ipa_reference_get_not_written_global): Rename to ...
(ipa_reference_get_written_global): ... this.
(dump_static_vars_set_to_file): Dump no_module_statics.
(copy_static_var_set): Add for propagation parameter.
(ipa_init): Initialize no_module_statics.
(ipa_ref_opt_summary_t::duplicate): Update.
(ipa_ref_opt_summary_t::remove): Update.
(propagate): Update.
(write_node_summary_p): Look correctly for bitmap differences.
(ipa_reference_write_optimization_summary): Update.
(ipa_reference_read_optimization_summary): Update.
* ipa-reference.h
(ipa_reference_get_not_read_global): Rename to ...
(ipa_reference_get_read_global): ... this.
(ipa_reference_get_not_written_global): Rename to ...
(ipa_reference_get_written_global): ... this.
* tree-ssa-alias.c (ref_maybe_used_by_call_p_1): Update.
(call_may_clobber_ref_p_1): Update.
From-SVN: r277403
Jozef Lawrynowicz [Thu, 24 Oct 2019 13:36:52 +0000 (13:36 +0000)]
MSP430: Remove unused msp430_hard_regno_nregs_*_padding functions
2019-10-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430.c (msp430_hard_regno_nregs_has_padding): Remove
and add comment.
(msp430_hard_regno_nregs_with_padding): Remove.
From-SVN: r277395
Jozef Lawrynowicz [Thu, 24 Oct 2019 13:34:54 +0000 (13:34 +0000)]
MSP430: Tweaks to generation of 430X instructions
gcc/ChangeLog:
2019-10-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/constraints.md: Allow post_inc for "Ya" constraint.
* config/msp430/msp430.md (430x_shift_left): Use RLAM when the constant
shift amount is between 1 and 4.
(430x_arithmetic_shift_right): Use RRAM when the constant shift amount
is between 1 and 4.
gcc/testsuite/ChangeLog:
2019-10-24 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* gcc.target/msp430/emulate-slli.c: Skip for -mcpu=msp430.
Add shift by a constant 5 bits.
Update scan-assembler directives.
* gcc.target/msp430/emulate-srai.c: Likewise.
* gcc.target/msp430/emulate-srli.c: Skip for -mcpu=msp430.
From-SVN: r277394
Richard Biener [Thu, 24 Oct 2019 12:11:27 +0000 (12:11 +0000)]
re PR tree-optimization/92205 (ICE in vect_get_vec_def_for_stmt_copy, at tree-vect-stmts.c:1688 since r277322)
2019-10-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/92205
* tree-vect-loop.c (vectorizable_reduction): Restrict
search for alternate vectype_in to lane-reducing patterns
we support.
* gcc.dg/vect/pr92205.c: New testcase.
From-SVN: r277375
Richard Biener [Thu, 24 Oct 2019 11:23:54 +0000 (11:23 +0000)]
re PR tree-optimization/92203 (ICE in eliminate_stmt, at tree-ssa-sccvn.c:5492)
2019-10-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/92203
* treee-ssa-sccvn.c (eliminate_dom_walker::eliminate_stmt):
Skip eliminating conversion stmts inserted by insertion.
* gcc.dg/torture/pr92203.c: New testcase.
From-SVN: r277374
Richard Biener [Thu, 24 Oct 2019 10:23:52 +0000 (10:23 +0000)]
re PR tree-optimization/65930 (Reduction with sign-change not handled)
2019-10-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/65930
* gcc.dg/vect/vect-reduc-2short.c: Fix typo.
From-SVN: r277373
Richard Biener [Thu, 24 Oct 2019 09:59:24 +0000 (09:59 +0000)]
re PR tree-optimization/65930 (Reduction with sign-change not handled)
2019-10-24 Richard Biener <rguenther@suse.de>
PR tree-optimization/65930
* gcc.dg/vect/vect-reduc-2char-big-array.c: Adjust again.
* gcc.dg/vect/vect-reduc-2char.c: Likewise.
* gcc.dg/vect/vect-reduc-2short.c: Likewise.
* gcc.dg/vect/vect-reduc-dot-s8b.c: Likewise.
* gcc.dg/vect/vect-reduc-pattern-2c.c: Likewise.
From-SVN: r277372
Jonathan Wakely [Thu, 24 Oct 2019 09:47:25 +0000 (10:47 +0100)]
PR libstdc++/88338 Implement P0898R3, C++20 concepts library
The implementation is already complete but this updates the docs and
adds tests for the feature test macro.
* doc/xml/manual/status_cxx2020.xml: Update status.
* doc/html/*: Regenerate.
* testsuite/std/concepts/1.cc: New test.
* testsuite/std/concepts/2.cc: New test.
From-SVN: r277371
Jonathan Wakely [Thu, 24 Oct 2019 09:35:07 +0000 (10:35 +0100)]
Define std::uniform_random_bit_generator concept for C++20
* include/bits/random.h (uniform_random_bit_generator): Define for
C++20.
* testsuite/26_numerics/random/concept.cc: New test.
* testsuite/26_numerics/random/pr60037-neg.cc: Adjust dg-error line.
From-SVN: r277369
Ilya Leoshkevich [Thu, 24 Oct 2019 09:00:41 +0000 (09:00 +0000)]
S/390: Use UNSPEC_GET_TP for thread pointer loads
gcc/ChangeLog:
2019-10-24 Ilya Leoshkevich <iii@linux.ibm.com>
* config/s390/s390.c (s390_get_thread_pointer): Use
gen_get_thread_pointer.
(s390_expand_split_stack_prologue): Likewise.
* config/s390/s390.md (UNSPEC_GET_TP): New UNSPEC.
(*get_tp_31): New 31-bit splitter for UNSPEC_GET_TP.
(*get_tp_64): New 64-bit splitter for UNSPEC_GET_TP.
(get_thread_pointer<mode>): Use UNSPEC_GET_TP, use
parameterized name.
gcc/testsuite/ChangeLog:
2019-10-24 Ilya Leoshkevich <iii@linux.ibm.com>
* gcc.target/s390/load-thread-pointer-once-2.c: New test.
From-SVN: r277368
Martin Liska [Thu, 24 Oct 2019 08:49:02 +0000 (10:49 +0200)]
Fix another UBSAN in Fortran coarray.
2019-10-24 Martin Liska <mliska@suse.cz>
PR fortran/92174
* array.c (gfc_resolve_array_spec): Break the loop
for out of bounds index.
* resolve.c (is_non_constant_shape_array): Likewise.
From-SVN: r277367
Richard Biener [Thu, 24 Oct 2019 06:19:01 +0000 (06:19 +0000)]
tree-vect-slp.c (vect_analyze_slp): When reduction group SLP discovery fails try to handle the reduction as part of...
2019-10-24 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_analyze_slp): When reduction group
SLP discovery fails try to handle the reduction as part
of SLP reduction discovery.
* gcc.dg/vect/slp-reduc-9.c: New testcase.
From-SVN: r277366
Nathan Sidwell [Thu, 24 Oct 2019 00:59:57 +0000 (00:59 +0000)]
[C++ PATCH] 'std' identifier not needed
https://gcc.gnu.org/ml/gcc-patches/2019-10/msg01707.html
* cp-tree.c (CPTI_STD_IDENTIFIER): Delete.
(std_identifier): Delete.
(DECL_NAME_SPACE_STD_P): Compare against std_node.
* decl.c (initialize_predefined_identifiers): 'std' is not needed.
(cxx_init_decl_processing): Adjust creation of ::std. Use
{push,pop}_nested_namespace.
(cxx_builtin_function): Use {push,pop}_nested_namespace.
* except.c (init_exception_processing): Likewise.
* rtti.c (init_rtti_processing): Likewise.
From-SVN: r277365
David Edelsohn [Thu, 24 Oct 2019 00:49:02 +0000 (00:49 +0000)]
pr70010.c: Add -Wno-psabi.
* gcc.target/powerpc/pr70010.c: Add -Wno-psabi.
* gcc.target/powerpc/pr70010-[12].c: Require LTO.
* gcc.target/powerpc/pr91275.c: Add -mcpu=power8.
From-SVN: r277363
GCC Administrator [Thu, 24 Oct 2019 00:16:17 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r277362
Steven G. Kargl [Wed, 23 Oct 2019 23:29:25 +0000 (23:29 +0000)]
2019-10-23 Steven G. Kargl <kargl@gcc.gnu.org>
dump-parse-tree.c (show_expr): Add dumping of BT_BOZ constants.
From-SVN: r277358
Michael Meissner [Wed, 23 Oct 2019 20:53:08 +0000 (20:53 +0000)]
Rework how prefixed instruction length is calculated.
2019-10-23 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000-protos.h (rs6000_adjust_insn_length): New
declaration.
* config/rs6000/rs6000.c (rs6000_insn_cost): Use num_insns insn
attribute if it exists, rather than the insn size. If we use the
insn size, adjust the size to remove the extra size that prefixed
instructions take.
(rs6000_adjust_insn_length): New function.
* config/rs6000/rs6000.h (ADJUST_INSN_LENGTH): New target hook to
update the instruction sized if prefixed instructions are used.
* config/rs6000/rs6000.md (prefixed_length attribute): Delete.
(non_prefixed_length attribute): Delete.
(num_insns attribute): New insn attribute to return the number of
instructions.
(max_prefixed_insns attribute): New insn attribute to return the
maximum number of prefixed instructions in an insn.
(length attribute): Do not adjust for prefix instructions here,
punt to ADJUST_INSN_LENGTH.
(mov<mode>_64bit): Set max_prefixed_insns and num_insns.
(movtd_64bit_nodm): Set max_prefixed_insns and num_insns.
(mov<mode>_ppc64): Set max_prefixed_insns and num_insns.
* config/rs6000/vsx.md: (vsx_mov<mode>_64bit): Set
max_prefixed_insns and num_insns.
From-SVN: r277352
Jason Merrill [Wed, 23 Oct 2019 20:41:26 +0000 (16:41 -0400)]
Implement P1286R2, Contra CWG1778
The C++11 requirement that an explicit exception-specification on a
defaulted function match the implicit one was found to be problematic for
std::atomic. This paper, adopted in February, simply removes that
requirement: if an explicitly defaulted function has a different
exception-specification, that now works just like a user-written function:
either it isn't noexcept when it could be, or it is noexcept and will call
terminate if an exception is thrown.
* method.c (defaulted_late_check): Don't check explicit
exception-specification on defaulted function.
(after_nsdmi_defaulted_late_checks): Remove.
* parser.h (struct cp_unparsed_functions_entry): Remove classes.
* parser.c (unparsed_classes): Remove.
(push_unparsed_function_queues, cp_parser_class_specifier_1):
Adjust.
From-SVN: r277351
Michael Meissner [Wed, 23 Oct 2019 20:09:27 +0000 (20:09 +0000)]
Reformat some code; Add support for generating PLWA with offsets whose bottom 2 bits are non-zero.
2019-10-23 Michael Meissner <meissner@linux.ibm.com>
* config/rs6000/rs6000.md (mov<mode>_64bit_dm): Reformat.
(movtd_64bit_nodm): Reformat.
(mov<mode>_32bit): Reformat.
(mov<mode>_softfloat): Reformat.
(FMOVE128_GPR splitter): Reformat.
(DIFD splitter): Reformat.
(TI2 splitter): Reformat.
* config/rs6000/predicates.md (lwa_operand): If the bottom two
bits of the offset for the memory address are non-zero, use PLWA
if prefixed instructions are available.
From-SVN: r277349
Jan Hubicka [Wed, 23 Oct 2019 20:01:25 +0000 (22:01 +0200)]
lto-streamer-out.c (cmp_symbol_files): Watch for overflow.
* lto-streamer-out.c (cmp_symbol_files): Watch for overflow.
From-SVN: r277348
Jan Hubicka [Wed, 23 Oct 2019 19:03:42 +0000 (21:03 +0200)]
ipa-reference.c (varpool_removal_hook, [...]): Fix previous patch.
* ipa-reference.c (varpool_removal_hook, ipa_reference_c_finalize): Fix
previous patch.
From-SVN: r277347
Jan Hubicka [Wed, 23 Oct 2019 18:22:40 +0000 (20:22 +0200)]
lto-streamer-out.c (output_constructor): Push CTORS_OUT timevar.
* lto-streamer-out.c (output_constructor): Push CTORS_OUT timevar.
(cmp_symbol_files): New.
(lto_output): Copy sections in file order.
* lto-streamer.h (lto_file_decl_data): Add field order.
* lto-common.c (lto_file_finalize): Add order attribute.
(lto_create_files_from_ids): Pass order.
(lto_file_read): UPdate call of lto_create_files_from_ids.
From-SVN: r277346
Jan Hubicka [Wed, 23 Oct 2019 18:18:31 +0000 (20:18 +0200)]
ipa-reference.h (ipa_reference_var_uid): Move offline.
* ipa-reference.h (ipa_reference_var_uid): Move offline.
* ipa-reference.c (reference_vars_map_t): new type.
(ipa_reference_vars_map, ipa_reference_vars_uids): New static vars.
(ipa_reference_var_uid): Implement.
(varpool_node_hooks): New static var.
(varpool_removal_hook): New function.
(is_improper): Do not check bitmap for id==-1
(get_static_name): Update.
(ipa_init): Initialize new datastructures.
(analyze_function): Do not recompute ids.
(propagate): Free reference_vars_to_consider.
(stream_out_bitmap): Update.
(ipa_reference_read_optimization_summary): Update.
From-SVN: r277345
Qing Zhao [Wed, 23 Oct 2019 18:12:39 +0000 (18:12 +0000)]
re PR gcov-profile/91971 (Profile directory concatenated with object file path)
2019-10-23 qing zhao <qing.zhao@oracle.com>
PR gcov-profile/91971
* coverage.c (coverage_init): Mangle the full path of filename when
filename is a absolute path.
From-SVN: r277344
Jonathan Wakely [Wed, 23 Oct 2019 17:42:16 +0000 (18:42 +0100)]
Make std::invoke usable in constant expressions
* include/std/functional (invoke): Add constexpr for C++20.
* include/std/version (__cpp_lib_constexpr_invoke): Define.
* testsuite/20_util/function_objects/invoke/constexpr.cc: New test.
From-SVN: r277343
Jonathan Wakely [Wed, 23 Oct 2019 17:42:11 +0000 (18:42 +0100)]
PR c++/91369 Implement P0784R7 changes to allocation and construction
This patch is the first part of library support for constexpr
std::vector and std::string. This only includes the changes to
std::allocator, std::allocator_traits, std::construct_at,
std::destroy_at, std::destroy and std::destroy_n.
std::allocator::allocate and std::allocator::deallocate need to be
added so that they can be intercepted by the compiler during constant
evaluation. Outside of constant evaluation those new member functions
just forward to the existing implementation in the base class.
PR c++/91369 Implement P0784R7 changes to allocation and construction
* include/bits/alloc_traits.h: Include <bits/stl_construct.h>.
(allocator_traits::_S_allocate, allocator_traits::_S_construct)
(allocator_traits::_S_destroy, allocator_traits::_S_max_size)
(allocator_traits::_S_select, allocator_traits::allocate)
(allocator_traits::deallocate, allocator_traits::construct)
(allocator_traits::destroy, allocator_traits::max_size)
(allocator_traits::select_on_container_copy_construction)
(allocator_traits<allocator<T>>): Add constexpr specifier for C++20.
(allocator_traits<allocator<T>>::construct): Use construct_at.
(allocator_traits<allocator<T>>::destroy): Use destroy_at.
(__alloc_on_copy, __alloc_on_move, __alloc_on_swap): Add constexpr
specifier.
(_Destroy(ForwardIterator, ForwardIterator, Alloc&))
(_Destroy(ForwardIterator, ForwardIterator, allocator<T>&)): Move here
from <bits/stl_construct.h>.
* include/bits/allocator.h (allocator::~allocator): Remove for C++20.
(allocator::allocate, allocate::deallocate): Define for C++20 and up.
(operator==, operator!=): Add constexpr specifier for C++20.
* include/bits/stl_construct.h: Don't include <ext/alloc_traits.h>.
(destroy_at): For C++20 add constexpr specifier and support for
destroying arrays.
(construct_at): Define new function for C++20.
(_Construct): Return result of placement new-expression. For C++11 and
up add constexpr. For C++20 dispatch to std::construct_at during
constant evaluation.
(_Destroy(pointer)): Add constexpr specifier. For C++20 dispatch to
std::destroy_at during constant evaluation.
(_Destroy_aux::__destroy, _Destroy_n_aux::__destroy_n): Add constexpr
specifier for C++20.
(_Destroy(ForwardIterator, ForwardIterator))
(_Destroy(ForwardIterator, Size)): Likewise. Do not elide trivial
destructors during constant evaluation.
(destroy, destroy_n): Add constexpr specifier for C++20.
(_Destroy(ForwardIterator, ForwardIterator, Alloc&))
(_Destroy(ForwardIterator, ForwardIterator, allocator<T>&)): Move to
<bits/alloc_traits.h>, to remove dependency on allocators.
* include/bits/stl_uninitialized.h: Include <ext/alloc_traits.h>.
Include <bits/stl_pair.h> instead of <utility>.
* include/ext/alloc_traits.h: Always include <bits/alloc_traits.h>.
(__alloc_traits::construct, __alloc_traits::destroy)
(__alloc_traits::_S_select_on_copy, __alloc_traits::_S_on_swap): Add
constexpr specifier.
* include/ext/malloc_allocator.h (operator==, operator!=): Add
constexpr specifier for C++20.
* include/ext/new_allocator.h (operator==, operator!=): Likewise.
* testsuite/20_util/headers/memory/synopsis.cc: Add constexpr.
* testsuite/20_util/scoped_allocator/69293_neg.cc: Ignore additional
errors due to constexpr function called after failed static_assert.
* testsuite/20_util/specialized_algorithms/construct_at/1.cc: New test.
* testsuite/23_containers/vector/cons/destructible_debug_neg.cc:
Ignore additional errors due to constexpr function called after failed
static_assert.
* testsuite/23_containers/vector/cons/destructible_neg.cc: Likewise.
From-SVN: r277342
Jozef Lawrynowicz [Wed, 23 Oct 2019 16:55:44 +0000 (16:55 +0000)]
msp430-protos.h (msp430_has_hwmult): New.
2019-10-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/msp430-protos.h (msp430_has_hwmult): New.
* config/msp430/msp430.c (msp430_no_hwmult): Remove.
(msp430_has_hwmult): New.
(msp430_output_labelref):
s/msp430_hwmult_type != MSP430_HWMULT_NONE/msp430_has_hwmult ()/
* config/msp430/msp430.md (mulhisi3): Likewise.
(umulhisi3): Likewise.
(mulsidi3): Likewise.
(umulsidi3): Likewise.
From-SVN: r277341
Jozef Lawrynowicz [Wed, 23 Oct 2019 16:52:47 +0000 (16:52 +0000)]
lib2hw_mul.S: Fix wrong syntax in branch instruction.
2019-10-23 Jozef Lawrynowicz <jozef.l@mittosystems.com>
* config/msp430/lib2hw_mul.S: Fix wrong syntax in branch instruction.
s/RESULT_LO/RESLO, s/RESULT_HI/RESHI, s/MPY_OP1/MPY,
s/MPY_OP1_S/MPYS, s/MAC_OP1/MAC, s/MPY_OP2/OP2, s/MAC_OP2/OP2.
Define symbols for 32-bit and f5series hardware multiply
register addresses.
Replace hard-coded register addresses with symbols.
Fix "_mspabi*" typo.
Fix whitespace.
* config/msp430/lib2mul.c: Add comment.
From-SVN: r277340
Jonathan Wakely [Wed, 23 Oct 2019 16:14:54 +0000 (17:14 +0100)]
Replace C++14 feature used in C++11 test
* testsuite/20_util/bind/91371.cc: Fix test to compile as C++11.
From-SVN: r277339
Jonathan Wakely [Wed, 23 Oct 2019 16:14:50 +0000 (17:14 +0100)]
Only qualify function as constexpr for C++14 and later
This helper function is not a valid constexpr function in C++11, so
should only be marked constexpr for C++14 and later.
* include/debug/helper_functions.h (__valid_range): Change
_GLIBCXX_CONSTEXPR to _GLIBCXX14_CONSTEXPR.
From-SVN: r277338
Jonathan Wakely [Wed, 23 Oct 2019 16:14:47 +0000 (17:14 +0100)]
Qualify type names in <ext/throw_allocator.h>
* include/ext/throw_allocator.h (throw_allocator_base): Qualify
size_t and ptrdiff_t.
From-SVN: r277337
Jonathan Wakely [Wed, 23 Oct 2019 16:14:43 +0000 (17:14 +0100)]
Adjust pb_ds extensions to use allocator_traits
These changes are largely useless, because most of them are simply
allowing 'reference' and 'const_reference' types to be obtained from an
allocator, and since C++11 allocators don't define reference types (they
just use plain lvalue references. Pretending to support C++98 allocators
with user-defined reference types is a waste of time (especially as
several of the pb_ds types appear to use a static allocator object which
means stateful allocators are not supported).
* include/ext/pb_ds/detail/bin_search_tree_/bin_search_tree_.hpp:
Use detail::rebind_traits.
* include/ext/pb_ds/detail/bin_search_tree_/node_iterators.hpp:
Likewise.
* include/ext/pb_ds/detail/bin_search_tree_/traits.hpp: Likewise.
* include/ext/pb_ds/detail/binary_heap_/binary_heap_.hpp: Likewise.
* include/ext/pb_ds/detail/binary_heap_/entry_cmp.hpp: Likewise.
* include/ext/pb_ds/detail/binary_heap_/entry_pred.hpp: Likewise.
* include/ext/pb_ds/detail/binary_heap_/point_const_iterator.hpp:
Likewise.
* include/ext/pb_ds/detail/binomial_heap_base_/binomial_heap_base_.hpp:
Likewise.
* include/ext/pb_ds/detail/branch_policy/branch_policy.hpp: Likewise.
* include/ext/pb_ds/detail/cc_hash_table_map_/cc_ht_map_.hpp: Likewise.
* include/ext/pb_ds/detail/cond_dealtor.hpp: Likewise.
* include/ext/pb_ds/detail/eq_fn/hash_eq_fn.hpp (has_eq_fn): Likewise.
* include/ext/pb_ds/detail/gp_hash_table_map_/gp_ht_map_.hpp: Likewise.
* include/ext/pb_ds/detail/hash_fn/ranged_hash_fn.hpp: Likewise.
* include/ext/pb_ds/detail/hash_fn/ranged_probe_fn.hpp: Likewise.
* include/ext/pb_ds/detail/left_child_next_sibling_heap_/
left_child_next_sibling_heap_.hpp: Likewise.
* include/ext/pb_ds/detail/left_child_next_sibling_heap_/node.hpp:
Likewise.
* include/ext/pb_ds/detail/left_child_next_sibling_heap_/
point_const_iterator.hpp: Likewise.
* include/ext/pb_ds/detail/list_update_map_/lu_map_.hpp: Likewise.
* include/ext/pb_ds/detail/ov_tree_map_/
constructors_destructor_fn_imps.hpp: Likewise.
* include/ext/pb_ds/detail/ov_tree_map_/node_iterators.hpp: Likewise.
* include/ext/pb_ds/detail/ov_tree_map_/ov_tree_map_.hpp: Likewise.
* include/ext/pb_ds/detail/pairing_heap_/pairing_heap_.hpp: Likewise.
* include/ext/pb_ds/detail/pat_trie_/pat_trie_.hpp: Likewise.
* include/ext/pb_ds/detail/pat_trie_/pat_trie_base.hpp: Likewise.
* include/ext/pb_ds/detail/rb_tree_map_/node.hpp: Likewise.
* include/ext/pb_ds/detail/rc_binomial_heap_/rc.hpp: Likewise.
* include/ext/pb_ds/detail/splay_tree_/node.hpp: Likewise.
* include/ext/pb_ds/detail/thin_heap_/thin_heap_.hpp: Likewise.
* include/ext/pb_ds/detail/trie_policy/sample_trie_access_traits.hpp:
Likewise.
* include/ext/pb_ds/detail/type_utils.hpp: Fix typo in comment.
* include/ext/pb_ds/detail/types_traits.hpp (stored_value): Add
bool parameter to control whether the hash value is stored.
(select_base_type): New class template and partial specialization.
(maybe_null_type): Likewise.
(rebind_traits): New class template.
(type_base): Remove four nearly identical specializations.
(type_dispatch): Remove.
(type_traits): Use select_base_type and maybe_null_type instead of
type_base to control differences between specializations.
* include/ext/pb_ds/list_update_policy.hpp: Use detail::rebind_traits.
* include/ext/pb_ds/priority_queue.hpp: Likewise.
* include/ext/pb_ds/tree_policy.hpp: Likewise.
* include/ext/pb_ds/trie_policy.hpp: Likewise.
From-SVN: r277336
Jonathan Wakely [Wed, 23 Oct 2019 16:14:28 +0000 (17:14 +0100)]
Adjust extension types to use allocator_traits
This makes these extensions work with types meeting the Cpp17Allocator
requirements as well as the C++98 Allocator requirements.
* include/backward/hash_set (hash_set): Use __alloc_traits.
* include/backward/hashtable.h (_Hashtable): Likewise.
* include/ext/alloc_traits.h (__alloc_traits::allocate): Add overload
taking a hint.
* include/ext/extptr_allocator.h (_ExtPtr_allocator::allocate): Ignore
hint.
* include/ext/slist (_Slist_base): Use __alloc_traits.
* include/tr1/hashtable.h (_Hashtable): Likewise.
* include/tr1/regex (match_results): Use vector::const_reference
instead of assuming the allocator defines it.
* testsuite/backward/hash_map/23528.cc: Use allocator_traits in C++11.
* testsuite/tr1/6_containers/unordered_map/capacity/29134-map.cc: Use
__gnu_test::max_size.
* testsuite/tr1/6_containers/unordered_multimap/capacity/
29134-multimap.cc: Likewise.
* testsuite/tr1/6_containers/unordered_multiset/capacity/
29134-multiset.cc: Likewise.
* testsuite/tr1/6_containers/unordered_set/capacity/29134-set.cc:
Likewise.
From-SVN: r277335
Jan Hubicka [Wed, 23 Oct 2019 14:45:24 +0000 (16:45 +0200)]
re PR ipa/92074 (26% performance regression on Spec2017 548.exchange2_r)
PR ipa/92074
* params.def (inline-heuristics-hint-percent): Set to 600.
From-SVN: r277333
Andrew Sutton [Wed, 23 Oct 2019 13:05:32 +0000 (13:05 +0000)]
Fix a bug with type constraints in constructors.
gcc/cp/
* parser.c (cp_parser_constructor_declarator_p): Pass an empty
decl-specifier-seq to make sure we parse type constraints as part
of a type-specifier.
gcc/testsuite/
* g++.dg/cpp2a/concepts5.C: New test.
From-SVN: r277323
Richard Biener [Wed, 23 Oct 2019 12:41:49 +0000 (12:41 +0000)]
re PR tree-optimization/65930 (Reduction with sign-change not handled)
2019-10-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/65930
* tree-vect-loop.c (check_reduction_path): Allow conversions
that only change the sign.
(vectorizable_reduction): Relax latch def stmts we handle further.
* gcc.dg/vect/vect-reduc-2char-big-array.c: Adjust.
* gcc.dg/vect/vect-reduc-2char.c: Likewise.
* gcc.dg/vect/vect-reduc-2short.c: Likewise.
* gcc.dg/vect/vect-reduc-dot-s8b.c: Likewise.
* gcc.dg/vect/vect-reduc-pattern-2c.c: Likewise.
From-SVN: r277322
Jakub Jelinek [Wed, 23 Oct 2019 12:38:03 +0000 (14:38 +0200)]
re PR debug/90231 (ivopts causes <optimized away> iterator in the loop)
PR debug/90231
* tree-ssa-loop-ivopts.c (get_debug_computation_at): New function.
(remove_unused_ivs): Use it instead of get_computation_at. When
choosing best candidate, only consider candidates where
get_debug_computation_at actually returns non-NULL.
From-SVN: r277321
Jakub Jelinek [Wed, 23 Oct 2019 12:35:00 +0000 (14:35 +0200)]
constexpr.c (cxx_eval_constant_expression): Temporarily change input_location to CLEANUP_STMT location.
* constexpr.c (cxx_eval_constant_expression) <case CLEANUP_STMT>:
Temporarily change input_location to CLEANUP_STMT location.
* g++.dg/cpp2a/constexpr-dtor3.C: Expect in 'constexpr' expansion of
message on the line with variable declaration.
* g++.dg/ext/constexpr-attr-cleanup1.C: Likewise.
From-SVN: r277320
Eric Botcazou [Wed, 23 Oct 2019 11:34:48 +0000 (11:34 +0000)]
re PR tree-optimization/92131 (incorrect assumption that (ao >= 0) is always false)
PR tree-optimization/92131
* tree-vrp.c (extract_range_from_plus_minus_expr): If the resulting
range would be symbolic, drop to varying for any explicit overflow
in the constant part or if neither range is a singleton.
From-SVN: r277314
Martin Liska [Wed, 23 Oct 2019 11:29:10 +0000 (13:29 +0200)]
Initialize a field in fibonacci_node.
2019-10-23 Martin Liska <mliska@suse.cz>
PR middle-end/81669
* fibonacci_heap.h (fibonacci_node::fibonacci_node):
Initialize m_data.
From-SVN: r277313
Richard Sandiford [Wed, 23 Oct 2019 10:31:01 +0000 (10:31 +0000)]
[AArch64] Don't apply mode_for_int_vector to scalars
aarch64_emit_approx_sqrt handles both vectors and scalars and was using
mode_for_int_vector even for the scalar case. Although that happened
to work, it isn't how mode_for_int_vector is supposed to be used.
2019-10-23 Richard Sandiford <richard.sandiford@arm.com>
gcc/
* config/aarch64/aarch64.c (aarch64_emit_approx_sqrt): Use
int_mode_for_mode rather than mode_for_int_vector for scalars.
From-SVN: r277311
Richard Biener [Wed, 23 Oct 2019 10:29:36 +0000 (10:29 +0000)]
re PR tree-optimization/92179 (r277288 causes ICEs compiling several test cases)
2019-10-23 Richard Biener <rguenther@suse.de>
PR tree-optimization/92179
* tree-vect-stmts.c (vectorizable_shift): For shift args
that are all the same remove type restriction in the SLP case.
Adjust SLP code to handle converting of the shift arg to
only apply in case the modes are different.
From-SVN: r277310
Martin Liska [Wed, 23 Oct 2019 08:55:05 +0000 (10:55 +0200)]
Do not ICE in IPA inliner.
2019-10-23 Martin Liska <mliska@suse.cz>
PR ipa/91969
* ipa-inline.c (recursive_inlining): Do not print
when curr->count is not initialized.
2019-10-23 Martin Liska <mliska@suse.cz>
PR ipa/91969
* g++.dg/ipa/pr91969.C: New test.
From-SVN: r277309
Richard Biener [Wed, 23 Oct 2019 06:45:03 +0000 (06:45 +0000)]
tree-vect-slp.c (vect_build_slp_tree_2): Do not build op from scalars in case there's a constant operand in its definition.
2019-10-23 Richard Biener <rguenther@suse.de>
* tree-vect-slp.c (vect_build_slp_tree_2): Do not build
op from scalars in case there's a constant operand in its
definition.
From-SVN: r277308
Iain Sandoe [Wed, 23 Oct 2019 05:39:32 +0000 (05:39 +0000)]
[Darwin, PPC] Check for out of range asm values.
There are some cases in which the value for the max skip to a p2align
directive can be negative. The older assembler just ignores these cases
where newer tools produce an error. To preserve behaviour, we avoid
emitting out of range values.
gcc/ChangeLog:
2019-10-23 Iain Sandoe <iain@sandoe.co.uk>
* config/rs6000/darwin.h (ASM_OUTPUT_MAX_SKIP_ALIGN): Guard
against out of range max skip or log values.
From-SVN: r277307
GCC Administrator [Wed, 23 Oct 2019 00:16:24 +0000 (00:16 +0000)]
Daily bump.
From-SVN: r277306
Jonathan Wakely [Tue, 22 Oct 2019 21:48:57 +0000 (22:48 +0100)]
Restore use of tr1::unordered_map in testsuite
My recent change to this file broke running the testsuite with
-std=c++98 because std::unordered_map isn't available. This fixes it.
* testsuite/util/testsuite_abi.h: Restore use of tr1/unordered_map
when compiled as C++98.
From-SVN: r277302
Jonathan Wakely [Tue, 22 Oct 2019 21:48:53 +0000 (22:48 +0100)]
Do not declare std::uses_allocator before C++11
* include/bits/memoryfwd.h (uses_allocator): Do not declare for C++98.
* testsuite/17_intro/names.cc: Check uses_allocator in C++98.
From-SVN: r277301
Jonathan Wakely [Tue, 22 Oct 2019 21:48:39 +0000 (22:48 +0100)]
Remove redundant std::allocator members for C++20
C++20 removes a number of std::allocator members that have correct
defaults provided by std::allocator_traits, so aren't needed.
Several extensions including __gnu_cxx::hash_map and tr1 containers are
no longer usable with std::allocator in C++20 mode. They need to be
updated to use __gnu_cxx::__alloc_traits in a follow-up patch.
* include/bits/alloc_traits.h
(allocator_traits<allocator<T>>::allocate): Ignore hint for C++20.
(allocator_traits<allocator<T>>::construct): Perform placement new
directly for C++20, instead of calling allocator<T>::construct.
(allocator_traits<allocator<T>>::destroy): Call destructor directly
for C++20, instead of calling allocator<T>::destroy.
(allocator_traits<allocator<T>>::max_size): Return value directly
for C++20, instead of calling std::allocator<T>::max_size().
(__do_alloc_on_copy, __do_alloc_on_move, __do_alloc_on_swap): Do not
define for C++17 and up.
(__alloc_on_copy, __alloc_on_move, __alloc_on_swap): Use if-constexpr
for C++17 and up, instead of tag dispatching.
* include/bits/allocator.h (allocator<void>): Remove for C++20.
(allocator::pointer, allocator::const_pointer, allocator::reference)
(allocator::const_reference, allocator::rebind): Remove for C++20.
* include/bits/basic_string.h (basic_string): Use __alloc_traits to
rebind allocator.
* include/bits/memoryfwd.h (allocator<void>): Remove for C++20.
* include/ext/debug_allocator.h: Use __alloc_traits for rebinding.
* include/ext/malloc_allocator.h (malloc_allocator::~malloc_allocator)
(malloc_allocator::pointer, malloc_allocator::const_pointer)
(malloc_allocator::reference, malloc_allocator::const_reference)
(malloc_allocator::rebind, malloc_allocator::max_size)
(malloc_allocator::construct, malloc_allocator::destroy): Do not
define for C++20.
(malloc_allocator::_M_max_size): Define new function.
* include/ext/new_allocator.h (new_allocator::~new_allocator)
(new_allocator::pointer, new_allocator::const_pointer)
(new_allocator::reference, new_allocator::const_reference)
(new_allocator::rebind, new_allocator::max_size)
(new_allocator::construct, new_allocator::destroy): Do not
define for C++20.
(new_allocator::_M_max_size): Define new function.
* include/ext/rc_string_base.h (__rc_string_base::_Rep): Use
__alloc_traits to rebind allocator.
* include/ext/rope (_Rope_rep_base, _Rope_base): Likewise.
(rope::rope(CharT, const allocator_type&)): Use __alloc_traits
to construct character.
* include/ext/slist (_Slist_base): Use __alloc_traits to rebind
allocator.
* include/ext/sso_string_base.h (__sso_string_base::_M_max_size):
Use __alloc_traits.
* include/ext/throw_allocator.h (throw_allocator): Do not use optional
members of std::allocator, use __alloc_traits members instead.
* include/ext/vstring.h (__versa_string): Use __alloc_traits.
* include/ext/vstring_util.h (__vstring_utility): Likewise.
* include/std/memory: Include <bits/alloc_traits.h>.
* testsuite/20_util/allocator/8230.cc: Use __gnu_test::max_size.
* testsuite/20_util/allocator/rebind_c++20.cc: New test.
* testsuite/20_util/allocator/requirements/typedefs.cc: Do not check
for pointer, const_pointer, reference, const_reference or rebind in
C++20.
* testsuite/20_util/allocator/requirements/typedefs_c++20.cc: New test.
* testsuite/23_containers/deque/capacity/29134.cc: Use
__gnu_test::max_size.
* testsuite/23_containers/forward_list/capacity/1.cc: Likewise.
* testsuite/23_containers/list/capacity/29134.cc: Likewise.
* testsuite/23_containers/map/capacity/29134.cc: Likewise.
* testsuite/23_containers/multimap/capacity/29134.cc: Likewise.
* testsuite/23_containers/multiset/capacity/29134.cc: Likewise.
* testsuite/23_containers/set/capacity/29134.cc: Likewise.
* testsuite/23_containers/vector/capacity/29134.cc: Likewise.
* testsuite/ext/malloc_allocator/variadic_construct.cc: Do not run
test for C++20.
* testsuite/ext/new_allocator/variadic_construct.cc: Likewise.
* testsuite/ext/vstring/capacity/29134.cc: Use __gnu_test::max_size.
* testsuite/util/replacement_memory_operators.h: Do not assume
Alloc::pointer exists.
* testsuite/util/testsuite_allocator.h (__gnu_test::max_size): Define
helper to call max_size for any allocator.
From-SVN: r277300
Giuliano Belinassi [Tue, 22 Oct 2019 19:05:49 +0000 (19:05 +0000)]
Fix incorrect merge of conflictant names in `dump_graphviz`
When using lto-dump -callgraph with two or more .o files containing distinct
functions with the same name, dump_graphviz incorrectly merged those functions
into a single node. This patch fixes this issue by calling `dump_name` instead
of `name`, therefore concat'ing the function name with the node's id.
To understeand what was the issue, let's say you have two files:
a.c: static void foo (void) { do_something (); }
b.c: static void foo (void) { do_something_else (); }
These are distinct functions and should be represented as distinct nodes in the
callgraph dump.
2019-10-22 Giuliano Belinassi <giuliano.belinassi@usp.br>
* cgraph.c (dump_graphviz): Change name to dump_name
From-SVN: r277299
Steven G. Kargl [Tue, 22 Oct 2019 18:18:59 +0000 (18:18 +0000)]
re PR fortran/92174 (runtime error: index 15 out of bounds for type 'gfc_expr *[15])
2019-10-22 Steven G. Kargl <kargl@gcc.gnu.org>
PR fortran/92174
* decl.c (attr_decl1): Move check for F2018:C822 from here ...
* array.c (gfc_set_array_spec): ... to here.
From-SVN: r277297
Jakub Jelinek [Tue, 22 Oct 2019 14:52:52 +0000 (16:52 +0200)]
re PR tree-optimization/85887 (Missing DW_TAG_lexical_block PC range)
PR tree-optimization/85887
* decl.c (expand_static_init): Drop ECF_LEAF from __cxa_guard_acquire
and __cxa_guard_release.
From-SVN: r277293
Marc Glisse [Tue, 22 Oct 2019 14:42:38 +0000 (16:42 +0200)]
PR c++/85746: Don't fold __builtin_constant_p prematurely
2019-10-22 Marc Glisse <marc.glisse@inria.fr>
gcc/cp/
* constexpr.c (cxx_eval_builtin_function_call): Only set
force_folding_builtin_constant_p if manifestly_const_eval.
gcc/testsuite/
* g++.dg/pr85746.C: New file.
From-SVN: r277292
Tamar Christina [Tue, 22 Oct 2019 14:25:38 +0000 (14:25 +0000)]
Arm: Fix arm libsanitizer bootstrap failure
Glibc has recently introduced changed to the mode field in ipc_perm
in commit
2f959dfe849e0646e27403f2e4091536496ac0f0. For Arm this
means that the mode field no longer has the same size.
This causes an assert failure against libsanitizer's internal copy
of ipc_perm. Since this change can't be easily detected I am adding
arm to the list of targets that are excluded from this check. libsanitizer
doesn't use this field (and others, it in fact uses only 1 field) so this check
can be ignored.
Padding bits were used by glibc when the field was changed so sizeof and offsets
of the remaining fields should be the same.
libsanitizer/ChangeLog:
PR sanitizer/92154
* sanitizer_common/sanitizer_platform_limits_posix.cpp (defined):
Cherry-pick compiler-rt revision r375220.
From-SVN: r277291
Richard Earnshaw [Tue, 22 Oct 2019 13:19:15 +0000 (13:19 +0000)]
[arm] Match subtraction from carry_operation
On Arm we have both carry and borrow operations, but borrow is
essentially '~carry'. Of course, with boolean logic ~carry is also
1-carry.
GCC transforms
(1 - X - LTU (cc, 0))
into
(GEU (cc, 0) - X)
Now the former matches a real insn in Arm state, using the RSC
instruction with #1 as the immediate, but we currently do not
recognize the canonicalized form. Nevertheless, given the above
logic, this turns out to be quite straight forward as the original
expression matches arm_borrow_operation and the revised form can be
used with arm_carry_operation. Since we match this new pattern we
also update rtx_costs to handle it.
* config/arm/arm.md (rsbsi_carryin_reg): New pattern.
* config/arm/arm.c (arm_rtx_costs_internal, case MINUS): Handle
subtraction from a carry operation.
From-SVN: r277290
Richard Earnshaw [Tue, 22 Oct 2019 13:16:42 +0000 (13:16 +0000)]
[arm] make arm_carry_operation and arm_borrow_operation duals
Arm_carry_operation and arm_borrow_operation are duals: given that we
have a comparison that returns a result that relies solely in the
carry flag one is the inverse of the other. So there's no reason for
one to have a CC mode that the other does not have. This patch
restores that equivalence.
* config/arm/predicates.md (arm_borrow_operation): Handle CC_ADCmode.
From-SVN: r277289
Richard Biener [Tue, 22 Oct 2019 13:08:53 +0000 (13:08 +0000)]
re PR tree-optimization/92173 (ICE in optab_for_tree_code, at optabs-tree.c:81)
2019-10-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/92173
* tree-vect-loop.c (vectorizable_reduction): If
vect_transform_reduction cannot handle code-generation try without
the single-def-use-cycle optimization. Pass optab_vector to
optab_for_tree_code to get vector shifts as that's what we'd
generate.
* gcc.dg/torture/pr92173.c: New testcase.
From-SVN: r277288
Michael Matz [Tue, 22 Oct 2019 12:25:03 +0000 (12:25 +0000)]
re PR middle-end/90796 (GCC: O2 vs O3 output differs on simple test)
Fix PR middle-end/90796
PR middle-end/90796
* gimple-loop-jam.c (any_access_function_variant_p): New function.
(adjust_unroll_factor): Use it to constrain safety, new parameter.
(tree_loop_unroll_and_jam): Adjust call and profitable unroll factor.
testsuite/
* gcc.dg/unroll-and-jam.c: Add three invalid and one valid case.
From-SVN: r277287
Richard Biener [Tue, 22 Oct 2019 11:51:52 +0000 (11:51 +0000)]
re PR tree-optimization/92173 (ICE in optab_for_tree_code, at optabs-tree.c:81)
2019-10-22 Richard Biener <rguenther@suse.de>
PR tree-optimization/92173
* tree-vect-loop.c (vectorizable_reduction): If
vect_transform_reduction cannot handle code-generation try without
the single-def-use-cycle optimization. Pass optab_vector to
optab_for_tree_code to get vector shifts as that's what we'd
generate.
* gcc.dg/torture/pr92173.c: New testcase.
From-SVN: r277286
Andreas Schwab [Tue, 22 Oct 2019 10:32:52 +0000 (10:32 +0000)]
* config/abi/post/aarch64-linux-gnu/baseline_symbols.txt: Update.
From-SVN: r277285