drm: add flags to drm_syncobj_find_fence

flags can be used by driver to decide whether need to block wait submission.

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
SIgned-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.kernel.org/patch/10641339/

drm: Shift * to be adjacent to pointer name

Shift * to be adjacent to pointer name to follow Linux coding style.
Issue found with checkpatch.pl
ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Mamta Shukla <mamtashukla555@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181015212644.GA28579@armorer

drm/v3d: Skip debugfs dumping GCA on platforms without GCA.

Fixes an oops reading this debugfs entry on BCM7278.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-4-eric@anholt.net
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Cc: <stable@vger.kernel.org>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm/v3d: Add some better documentation of the in_sync arguments.

Since this is UAPI, it's good to document what exactly the guarantees
we're providing are.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-3-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm/v3d: Add a little debugfs entry for measuring the core clock.

This adds just enough performance counter support to measure the
clock.  We don't have linux kernel drivers for the clock driving the
HW, and this was useful for determining that the V3D HW is running on
a slow clock, not that the driver was slow.

Signed-off-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928232126.4332-2-eric@anholt.net
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm/v3d: Fix a use-after-free race accessing the scheduler's fences.

Once we push the job, the scheduler could run it and free it.  So, if
we want to reference their fences, we need to grab them before then.
I haven't seen this happen in many days of conformance test runtime,
but let's still close the race.

Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: 57692c94dcbe ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Link: https://patchwork.freedesktop.org/patch/254119/
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>

drm: Do not call drm_dp_cec_set_edid() while registering DP connectors

drm_dp_cec_register_connector() is called when registering each DP
connector in DRM, while sounds a good idea register CEC adapters as
earlier as possible, it causes some driver initialization delay
trying to do DPCD transactions in disconnected connectors.

This change will cause no regressions as drm_dp_cec_set_edid() will
still be called in further detection of connected connectors with a
valid edid parameter.

This change reduced the module load of i915 by average 0.5sec in a
machine with just one DP port disconnected while reducing more than
3sec in a machine with 4 DP ports disconnected.

Cc: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181011004439.4482-1-jose.souza@intel.com

drm: Use PTR_ERR_OR_ZERO in drm_fb_cma_fbdev_init()

Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1539176563-144779-1-git-send-email-yuehaibing@huawei.com

drm/sun4i: tcon: prevent tcon->panel dereference if NULL

If tcon->panel pointer is NULL, trying to dereference from it
(i.e. tcon->panel->connector) will cause a null pointer dereference.

Add tcon->panel null pointer check before calling
sun4i_tcon0_mode_set_dithering().

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Fixes: f11adcecbd5f ("drm/sun4i: tcon: Add dithering support for
                      RGB565/RGB666 LCD panels")
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-2-giulio.benetti@micronovasrl.com

drm/sun4i: tcon: fix check of tcon->panel null pointer

Since tcon->panel is a pointer returned by of_drm_find_panel() need to
check if it is not NULL, hence a valid pointer.
IS_ERR() instead checks return error values, not NULL pointers.

Substitute "if (!IS_ERR(tcon->panel))" with "if (tcon->panel)".

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005215951.99003-1-giulio.benetti@micronovasrl.com

drm: Unexport drm_plane_helper_check_update

It's for legacy drivers only (atomic ones should use
drm_atomic_helper_check_plane_state() instead), and there's no users
left except the one in the primary plane helpers.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-18-daniel.vetter@ffwll.ch

drm/vmwgfx: Fix vmw_du_cursor_plane_atomic_check

Use the correct helper and also return early on helper
success rather than on helper failure.

Also explicitly return 0 in the case of no fb.

v2: Check for !fb after updating state->visible (Ville).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> (v1)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reported-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-17-daniel.vetter@ffwll.ch

drm: Unexport primary plane helpers

Well except the destroy helper, which isn't really a primary helper
but generally useful, if mislabelled.

v2: Keep some of the nice comments about the limitations of the
primarmy plane helpers, and put them into the kerneldoc for
drm_crtc_init() (Sam).

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005094732.31353-1-daniel.vetter@ffwll.ch

drm/todo: Add some cleanup tasks

Motivated by review comments from Ville&Sean.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-21-daniel.vetter@ffwll.ch

drm/doc: fix drm_driver_legacy_fb_format

Didn't get updated in a rework of the original patch.

Fixes: 059b5eb5d955 ("drm: move native byte order quirk to new drm_driver_legacy_fb_format function")
Cc: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-20-daniel.vetter@ffwll.ch

drm: Remove transitional helpers

With armada the last bigger driver that realistically needed these to
convert from legacy kms to atomic is converted. These helpers have
been broken more often than not the past 2 years, and as this little
patch series shows, tricked a bunch of people into using the wrong
helpers for their functions.

Aside: I think a lot more drivers should be using the device-level
drm_atomic_helper_shutdown/suspend/resume helpers and related
functions. In almost all the cases they get things exactly right.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-16-daniel.vetter@ffwll.ch

drm/zte: Use drm_atomic_helper_shutdown

drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).

Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Shawn Guo <shawnguo@kernel.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-15-daniel.vetter@ffwll.ch

drm/vc4: Use drm_atomic_helper_shutdown

drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).

Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.

v2: Rebase.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-14-daniel.vetter@ffwll.ch

drm/sti: Use drm_atomic_helper_shutdown

drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).

Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.

The sti cleanup code seems supremely confused:
- In the load error path it calls drm_mode_config_cleanup before it
  stops various kms services like poll worker or fbdev emulation.
  That's going to oops.
- The actual unload code doesn't even bother with the cleanup and just
  leaks.

Try to fix this while at it.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-13-daniel.vetter@ffwll.ch

drm/msm: Use drm_atomic_helper_shutdown

drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).

Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Rajesh Yadav <ryadav@codeaurora.org>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Jeykumar Sankaran <jsanka@codeaurora.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: "Ville Syrjälä" <ville.syrjala@linux.intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Gustavo Padovan <gustavo.padovan@collabora.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-12-daniel.vetter@ffwll.ch

drm/arcpgu: Use drm_atomic_helper_shutdown

drm_plane_helper_disable is a non-atomic drivers only function, and
will blow up (since no one passes the locking context it needs).

Atomic drivers which want to quiescent their hw on unload should
use drm_atomic_helper_shutdown() instead.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-11-daniel.vetter@ffwll.ch

drm/atmel: Drop transitional hooks

These do absolutely nothing for atomic drivers.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-10-daniel.vetter@ffwll.ch

drm/arcpgu: Drop transitional hooks

These do absolutely nothing for atomic drivers.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-9-daniel.vetter@ffwll.ch

drm/atomic: Improve docs for drm_atomic_state->allow_modeset

Motivated by vmwgfx digging around in core uapi bits it shouldn't dig
around in.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-7-daniel.vetter@ffwll.ch

drm: Extract drm_atomic_state_helper.[hc]

We already have a separate overview doc for this, makes sense to
untangle it from the overall atomic helpers.

v2: Rebase

v3: Rebase more.

Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-4-daniel.vetter@ffwll.ch

drm/atomic-helper: Unexport drm_atomic_helper_best_encoder

It's the default. The exported version was kinda a transition state,
before we made this the default.

To stop new atomic drivers from using it (instead of just relying on
the default) let's unexport it.

v2: rename the default implementation to a more fitting name and add a
comment (Laurent)

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Pierre-Hugues Husson <phh@phh.me>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-3-daniel.vetter@ffwll.ch

drm/amdgpu: Remove default best_encoder hook from DC

For atomic driver this is the default, no need to reimplement it. We
still need to keep the copypasta for not-atomic drivers though, since
no one polished the legacy crtc helpers as much as the atomic ones.

v2: amdgpu uses ->best_encoder internally, give it a local copy. It
might be a good idea to merge the connector and encoder into one
amdgpu_dm_sink structure, that might match DC internals better. At
least for non-DPMST outputs. Kudos to Ville for spotting this.

v3: Rebase onto a487411a6481 ("drm/amd/display: Use DRM helper for
best_encoder").

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Cc: Tony Cheng <Tony.Cheng@amd.com>
Cc: "Leo (Sunpeng) Li" <sunpeng.li@amd.com>
Cc: Shirish S <shirish.s@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-2-daniel.vetter@ffwll.ch

drm: Remove defunct dma_buf_kmap stubs

Since commit 09ea0dfbf972 ("dma-buf: make map_atomic and map function
pointers optional"), we no longer need to provide stub no-op functions
as the core now provides them directly.

References: 09ea0dfbf972 ("dma-buf: make map_atomic and map function pointers optional")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180807174748.4503-1-chris@chris-wilson.co.uk

drm/vblank: Remove old-style comments

Somehow I forgot a few when typing all the shiny new kerneldoc. Drop
them.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005073636.27291-1-daniel.vetter@ffwll.ch

drm: add drm_connector_attach_edid_property()

drm_connector_init doesn't attach the edid property for some connector
types, drm_connector_attach_edid_property() can be used to enable the
edid property in these cases.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20181002111041.17053-2-kraxel@redhat.com

drm: Fix kernel doc for DRM_MODE_PROP_IMMUTABLE

This patch explains the DRM_MODE_PROP_IMMUTABLE flag a bit better
by telling which function to call if kernel wants to update
drm object's immutable properties.

Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20181002215055.8652-1-manasi.d.navare@intel.com

drm/vkms: Extend todo

Typed up all the items Rodrigo capture at the vkms workshop at
xdc2018:

https://etherpad.net/p/vkms_todo

v2: Review from Rodrigo.
- Add eBPF for atomic check, I forgot it.
- Improve spelling.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Reviewed-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181003132103.29309-1-daniel.vetter@ffwll.ch

video/hdmi: Constify infoframe passed to the pack functions

Let's make the infoframe pack functions usable with a const infoframe
structure. This allows us to precompute the infoframe earlier, and still
pack it later when we're no longer allowed to modify the structure.
So now we end up with a _check()+_pack_only() or _pack() functions
depending on whether you want to precompute the infoframes or not.
The names aren't great but I was lazy and didn't want to change all the
drivers.

v2: Deal with exynos churn
    Actually export the new funcs
v3: Fix various documentation fails (Hans)

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921143332.28970-1-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

drm/fsl-dcu: use drm_display_mode_to_videomode to calculate timing parameters

Use the drm_display_mode_to_videomode function to calculate front/
back porches and sync length.

Cc: Madhur Verma <madhur.verma@samsung.com>
Cc: Hemanshu Srivastava <hemanshu.s@samsung.com>
Signed-off-by: Satendra Singh Thakur <satendra.t@samsung.com>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-2-stefan@agner.ch

drm/fsl-dcu: drop unused drm_crtc_index()

The result of drm_crtc_index() is unused. Remove the call and
the unused variable.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926204150.29829-1-stefan@agner.ch

video/hdmi: Constify infoframe passed to the log functions

The log functions don't modify the passed in infoframe so make it const.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-4-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

video/hdmi: Pass buffer size to infoframe unpack functions

To make sure the infoframe unpack functions don't end up examining
stack garbage or oopsing, let's pass in the size of the buffer.

v2: Convert tda1997x.c as well (kbuild test robot)

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-3-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

video/hdmi: Constify 'buffer' to the unpack functions

The unpack functions just read from the passed in buffer,
so make it const.

Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Hans Verkuil <hans.verkuil@cisco.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180920185145.1912-2-ville.syrjala@linux.intel.com
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>

drm: Convert to using %pOFn instead of device_node.name

In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

For drm_modes.c, the full node path is already printed out, so printing
just the node name a 2nd time is redundant and can be removed.

Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Acked-by: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180928225044.20132-1-robh@kernel.org

drm/bochs: Replace drm_gem_object_unreference_unlocked with put function

This patch unifies the naming of DRM functions for reference counting
of struct drm_gem_object. The resulting code is more aligned with the
rest of the Linux kernel interfaces.

v2:
* rebase onto fbdev rework

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20180926113623.22679-1-tzimmermann@suse.de
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/zte: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120650.25614-1-tzimmermann@suse.de

drm/rockchip: dw_hdmi: add dw-hdmi support for the rk3328

The rk3328 uses a dw-hdmi controller with an external hdmi phy from
Innosilicon which uses the generic phy framework for access.
Add the necessary data and the compatible for the rk3328 to the
rockchip dw-hdmi driver.

changes in v5:
- disable CEC_5V option to make CEC actually work (Jonas)
changes in v3:
- reword as suggested by Rob to show that it's a dw-hdmi + Inno phy

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-7-heiko@sntech.de

drm/rockchip: dw_hdmi: store rockchip_hdmi reference in phy_data object

When using special phy handling operations we'll often need access to
the rockchip_hdmi struct.

As the chip-data that occupies the phy_data pointer initially gets
assigned to the rockchip_hdmi struct, we can now re-use this phy_data
pointer to hold the reference to the rockchip_hdmi struct and use this
reference later on.

Inspiration for this comes from meson and sunxi dw-hdmi, which are using
the same method.

changes in v3:
- reword commit message

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-6-heiko@sntech.de

drm/rockchip: dw_hdmi: allow including external phys

Some variants of the dw-hdmi on Rockchip socs use a separate phy block
accessed via the generic phy framework, so allow them to be included
if such a phy reference is found.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-5-heiko@sntech.de

dt-bindings: allow optional phys in Rockchip dw_hdmi binding

Some newer Rockchip SoCs use an Innosilicon hdmiphy accessed via general
mmio, so allow these to be referenced via the regular phy interfaces
and therefore add optional phy-related properties to the binding.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-4-heiko@sntech.de

drm/rockchip: dw_hdmi: Allow outputs that don't need output switching

So far we always encountered socs with 2 output crtcs needing the driver
to tell the hdmi block which output to connect to. But there also exist
socs with only one crtc like the rk3228, rk3328 and rk3368.

So adapt the register field to simply carry a negative value to signal
that no output-switching is necessary.

changes in v3:
- fixed wording issue found by Robin Murphy

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de

drm/bridge: dw-hdmi: allow forcing vendor phy-type

In some IP implementations the reading of the phy-type may be broken.
One example are the Rockchip rk3228 and rk3328 socs that use a separate
vendor-type phy from Innosilicon but still report the HDMI20_TX type.

So allow the glue driver to force the vendor-phy for these cases.
In the future it may be necessary to allow forcing other types, but
for now we'll keep it simply to the case actually seen in the wild.

changes in v3:
- only allow forcing vendor type, as suggested by Laurent

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Zheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-2-heiko@sntech.de
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de

drm: stm: implement get_scanout_position function

Hardware allow to read the position in scanout buffer so
we can use this information to make wait of vblank more accurate.

Active area bounds (start, end, total height) have already been
computed and written in ltdc registers, read them and get the
current line position to compute vpos value.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: Yannick Fertré <yannick.fertre@st.com>
Tested-by: Yannick Fertré <yannick.fertre@st.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180629130140.16004-1-benjamin.gaignard@linaro.org

drm/panel: Add support for Olimex LCD-OLinuXino panel

This patch adds Olimex Ltd. LCD-OLinuXino bridge panel driver. The panel
is used with different LCDs (currently from 480x272 to 1280x800). A
small EEPROM chip is used for identification, which holds some factory
data and timing requirements.

Signed-off-by: Stefan Mavrodiev <stefan@olimex.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1531383729-13932-1-git-send-email-stefan@olimex.com

drm/panel: simple: Add DLC1010GIG panel

Add support for the DLC DLC1010GIG 1280x800 10.1" LVDS panel to the
simple-panel driver.

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180924152610.25939-1-m.felsch@pengutronix.de

drm/panel: simple: Add support for Banana Pi 7" S070WV20-CT16 panel

This panel is marketed as Banana Pi 7" LCD display. On the back is
a sticker denoting the model name S070WV20-CT16.

This is a 7" 800x480 panel connected through a 24-bit RGB interface.
However the panel only does 262k colors.

Depending on the variant, the PCB attached to the panel module either
supports DSI, or DSI + 24-bit RGB. DSI is converted to 24-bit RGB via
an onboard ICN6211 MIPI DSI - RGB bridge chip, then fed to the panel
itself.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180907041948.19913-5-wens@csie.org

drm/panel: p079zca: unconditionally remove the panel on removal

There is no need to check innolux->base.dev when trying to remove
the panel, as that variable is always set directly before the panel
gets added and will still be available on panel_remove.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180816140920.5009-1-heiko@sntech.de

dt-bindings: Add CDTech S043WQ26H-CT7 panel bindings

Add documentation for S043WQ26H-CT7 panel

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-6-giulio.benetti@micronovasrl.com

drm/panel: add panel CDTech S043WQ26H-CT7 to panel-simple

This patch adds support for CDTech S043WQ26H-CT7 480x272 4.3" panel to
DRM simple panel driver.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-5-giulio.benetti@micronovasrl.com

dt-bindings: Add CDTech S070WV95-CT16 panel bindings

Add documentation for S070WV95-CT16 panel

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-4-giulio.benetti@micronovasrl.com

drm/panel: add panel CDTech S070WV95-CT16 to panel-simple

This patch adds support for CDTech S070WV95-CT16 800x480 7" panel to DRM
simple panel driver.

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-3-giulio.benetti@micronovasrl.com

dt-bindings: Add vendor prefix for CDTech(H.K.) Electronics Limited

This adds a vendor prefix "cdtech" for CDTech(H.K.) Electronics Limited

Website: www.cdtech-lcd.com

Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730231117.5631-2-giulio.benetti@micronovasrl.com

drm/panel: seiko-43wvf1g: Add missing ">" character in author's email

There is a missing ">" character in Marco's email.

Fix it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-2-git-send-email-festevam@gmail.com

drm/panel: seiko-43wvf1g: Switch to SPDX identifier

Adopt the SPDX license identifier headers to ease license compliance
management.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532575167-14754-1-git-send-email-festevam@gmail.com

drm/panel: simple: fix BOE/HV070WSA-100 timings

Panel timings were taken from vendor code and are not fully correct -
refresh rate is about 50Hz instead of 60Hz. The patch fixes it.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725154644.25412-9-a.hajda@samsung.com

drm: panel-orientation-quirks: Add quirk for GPD win2

GPD has done it again, make a nice device (good), use way too generic
DMI strings (bad) and use a portrait screen rotated 90 degrees (ugly).

Because of the too generic DMI strings this entry is also doing bios-date
matching, so the gpd_win2 data struct may very well need to be updated
with some extra bios-dates in the future.

Reported-and-tested-by: russianneuromancer@ya.ru
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180909133457.10636-3-hdegoede@redhat.com

drm/imx: fix build failure without CONFIG_DRM_FBDEV_EMULATION

The variable is declared in an #ifdef section, but the user is
now unconditional, which leads to a build failure:

drivers/gpu/drm/imx/imx-drm-core.c: In function 'imx_drm_bind':
drivers/gpu/drm/imx/imx-drm-core.c:264:6: error: 'legacyfb_depth' undeclared (first use in this function); did you mean 'lockdep_depth'?

Remove the remaining #ifdef as well.

Fixes: f53705fd9803 ("drm/imx: Use drm_fbdev_generic_setup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926193846.2490574-1-arnd@arndb.de

drm/rockchip: vop: add rk3188 hs_start interrupt as dsp_hold equivalent

The hs_start interrupt on rk3188 fires at the start of a new frame, so
serves essentially the same purpose as the dsp_hold_valid irq in checking
when the last frame got delivered when going to standby. So define it
to fix a hang on atomic_disable of the vop because the completion never
really completed before.

Fixes: 428e15cc41e3 ("drm/rockchip: vop: add rk3188 vop definitions")
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180923123730.14706-1-heiko@sntech.de

drm/atmel-hlcdc: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <contact@tzimmermann.org>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180701132415.10161-1-contact@tzimmermann.org

dt-bindings: display: sun4i-drm: Add R40 mixer compatibles

R40 DE2 mixers are similar to those found in A83T, except it needs
different clock settings.

Add a compatibles for them.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180625120304.7543-14-jernej.skrabec@siol.net

Revert "drm/sun4i: Remove R40 display pipeline compatibles"

This reverts commit 3510e7a7f91088159bfc67e8abdc9f9e77d28870.

During the 4.19 merge window for drm-misc, two patches critical to
supporting the display pipeline on the Allwinner R40 SoC were missed.
They were applied later but missed the merge window deadline. As a
result 4.19-rc1 kernel would crash on the R40 when it couldn't parse
the new device tree structure. We ended up removing support for the
R40 display pipeline for 4.19.

Since the missing patches are already merged for 4.20, we can now
revert the commit that removed support.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180921142743.8711-1-wens@csie.org

Merge drm/drm-next into drm-misc-next

Backmerging 4.19-rc5 to pick up sun4i fix

Signed-off-by: Sean Paul <seanpaul@chromium.org>

BackMerge v4.19-rc5 into drm-next

Sean Paul requested an -rc5 backmerge from some sun4i fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge tag 'drm-hisilicon-next-2018-09-26' of github.com:xin3liang/linux into drm-next

- A crash fix founded in recent linux-next from John Garry
- One sparse warning fix from Souptick Joarder
- Some xxx_unref cleanup from Thomas Zimmermann

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Xinliang Liu <xinliang.liu@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAGd==04mXPMjVZ3=cM8r+DSQNM6zy7Anc4T2OsHjZgSsazBTPQ@mail.gmail.com

Merge tag 'du-next-20180925' of git://linuxtv.org/pinchartl/media into drm-next

R-Car DU support for the D3 and E3 SoCs (v4.20)

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3289904.RCOHkcp7u8@avalon

drm/fsl-dcu: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926114312.23097-1-tzimmermann@suse.de

MAINTAINERS: Move fsl-dcu driver to drm-misc tree

The driver is mostly in maintenance mode. Using drm-misc is a
good fit and should make maintenance a bit easier.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Acked-by: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926125034.4095-1-stefan@agner.ch

drm/mxsfb: Switch to drm_atomic_helper_commit_tail_rpm

The lcdif block is only powered on when display is active so plane
updates when not enabled are not valid. Writing to an unpowered IP block
is mostly ignored but can trigger bus errors on some chips.

Prevent this situation by switching to drm_atomic_helper_commit_tail_rpm
and having the drm core ensure atomic_plane_update is only called while
the crtc is active. This avoids having to keep track of "enabled" bits
inside the mxsfb driver.

This also requires handling the vblank event for disable from
mxsfb_pipe_disable.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Suggested-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c19c0c00ed42e8e8f7965aa4821ac295abc5cd05.1537191359.git.leonard.crestez@nxp.com

drm/mxsfb: Add PM_SLEEP support

Since power to the lcdif block can be lost on suspend implement
PM_SLEEP_OPS using drm_mode_config_helper_suspend/resume to save/restore
the current mode.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/cfa1a4083eefd112362e640deeb2e120584ac3f5.1537191359.git.leonard.crestez@nxp.com

drm/mxsfb: Add pm_runtime calls to pipe_enable/disable

Adding lcdif nodes to a power domain currently results in
black/corrupted screens or hangs because power is not correctly enabled
when required.

Ensure power is on when display is active by adding
pm_runtime_get/put_sync to mxsfb_pipe_enable/disable.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/ee88148399c63494cda4129b05444b0ac331b7a7.1537191359.git.leonard.crestez@nxp.com

drm/mxsfb: Fix initial corrupt frame when activating display

LCDIF will repeatedly display data from CUR_BUF and set CUR_BUF to
NEXT_BUF when done. Since we are only ever writing to NEXT_BUF the
display will show an initial corrupt frame.

Fix by writing the FB paddr to both CUR_BUF and NEXT_BUF when
activating the CRTC.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/7cdac9c064cc2b8a3d237934f186da98cefe6cb3.1537191359.git.leonard.crestez@nxp.com

drm/mxsfb: Move axi clk enable/disable to crtc enable/disable

The main axi clk is disabled at the end of mxsfb_crtc_mode_set_nofb and
immediately reenabled in mxsfb_enable_controller.

Avoid this by moving the handling of axi clk one level up to
mxsfb_crtc_enable. Do the same for mxsfb_crtc_disable for symmetry.

This shouldn't have any functional effect.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Stefan Agner <stefan@agner.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/985c1f1cad250bd9ca154b3e4b3f913c310eeabd.1537191359.git.leonard.crestez@nxp.com

drm/tegra: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926115640.24755-1-tzimmermann@suse.de

drm/udl: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180926120212.25359-1-tzimmermann@suse.de

MAINTAINERS: Move mxsfb drm driver to drm-misc tree

Another "small driver" moving into drm-misc. Stefan has also offered to
co-maintain it.

Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Agner <stefan@agner.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180919204026.3217-2-sean@poorly.run

virtio: Support prime objects vmap/vunmap

Implement vmap/vunmap so we can export dmabufs to
other drivers, such as video4linux.

Tested with a virtio-gpu / vivid (virtual capture driver)
pipeline, where the vivid driver imports the dmabufs exported
by virtio-gpu.

Note that dma_buf_vmap() does its own vmap counting, so
it's not needed to take care of it in the driver.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-4-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio: Rework virtio_gpu_object_kmap()

Currently, virtio_gpu_object_kmap() is only called by
virtio_gpufb_create(), when a DRM framebuffer is created.

Thus, instead of returning the vmap'ed address, emit a warning
if virtio_gpu_object_kmap is called on an already mapped
object. With this change, kmap/kunmap calls are now balanced.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-3-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

virtio: Add virtio_gpu_object_kunmap()

Implement a virtio_gpu_object_kunmap() to unmap the kernel
mapping, and use it in the TTM object destroy path.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180925161606.17980-2-ezequiel@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/hisilicon: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: Replace drm_dev_unref with drm_dev_put

This patch unifies the naming of DRM functions for reference counting
of struct drm_device. The resulting code is more aligned with the rest
of the Linux kernel interfaces.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

gpu/drm/hisilicon: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

Fixed one sparse warning by making hibmc_drm_interrupt
static.

Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Use HUAWEI PCI vendor ID macro

Switch to use Huawei PCI vendor ID macro from pci_ids.h file.

In addition, switch to use PCI_VDEVICE() instead of open coding.

Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Don't overwrite fb helper surface depth

Currently the driver overwrites the surface depth provided by the fb
helper to give an invalid bpp/surface depth combination.

This has been exposed by commit 70109354fed2 ("drm: Reject unknown legacy
bpp and depth for drm_mode_addfb ioctl"), which now causes the driver to
fail to probe.

Fix by not overwriting the surface depth.

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm/hisilicon: hibmc: Do not carry error code in HiBMC framebuffer pointer

In hibmc_drm_fb_create(), when the call to hibmc_framebuffer_init() fails
with error, do not store the error code in the HiBMC device frame-buffer
pointer, as this will be later checked for non-zero value in
hibmc_fbdev_destroy() when our intention is to check for a valid function
pointer.

This fixes the following crash:
[    9.699791] Unable to handle kernel NULL pointer dereference at virtual address 000000000000001a
[    9.708672] Mem abort info:
[    9.711489]   ESR = 0x96000004
[    9.714570]   Exception class = DABT (current EL), IL = 32 bits
[    9.720551]   SET = 0, FnV = 0
[    9.723631]   EA = 0, S1PTW = 0
[    9.726799] Data abort info:
[    9.729702]   ISV = 0, ISS = 0x00000004
[    9.733573]   CM = 0, WnR = 0
[    9.736566] [000000000000001a] user address but active_mm is swapper
[    9.742987] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[    9.748614] Modules linked in:
[    9.751694] CPU: 16 PID: 293 Comm: kworker/16:1 Tainted: G        W         4.19.0-rc4-next-20180920-00001-g9b0012c #322
[    9.762681] Hardware name: Huawei Taishan 2280 /D05, BIOS Hisilicon D05 IT21 Nemo 2.0 RC0 04/18/2018
[    9.771915] Workqueue: events work_for_cpu_fn
[    9.776312] pstate: 60000005 (nZCv daif -PAN -UAO)
[    9.781150] pc : drm_mode_object_put+0x0/0x20
[    9.785547] lr : hibmc_fbdev_fini+0x40/0x58
[    9.789767] sp : ffff00000af1bcf0
[    9.793108] x29: ffff00000af1bcf0 x28: 0000000000000000
[    9.798473] x27: 0000000000000000 x26: ffff000008f66630
[    9.803838] x25: 0000000000000000 x24: ffff0000095abb98
[    9.809203] x23: ffff8017db92fe00 x22: ffff8017d2b13000
[    9.814568] x21: ffffffffffffffea x20: ffff8017d2f80018
[    9.819933] x19: ffff8017d28a0018 x18: ffffffffffffffff
[    9.825297] x17: 0000000000000000 x16: 0000000000000000
[    9.830662] x15: ffff0000092296c8 x14: ffff00008939970f
[    9.836026] x13: ffff00000939971d x12: ffff000009229940
[    9.841391] x11: ffff0000085f8fc0 x10: ffff00000af1b9a0
[    9.846756] x9 : 000000000000000d x8 : 6620657a696c6169
[    9.852121] x7 : ffff8017d3340580 x6 : ffff8017d4168000
[    9.857486] x5 : 0000000000000000 x4 : ffff8017db92fb20
[    9.862850] x3 : 0000000000002690 x2 : ffff8017d3340480
[    9.868214] x1 : 0000000000000028 x0 : 0000000000000002
[    9.873580] Process kworker/16:1 (pid: 293, stack limit = 0x(____ptrval____))
[    9.880788] Call trace:
[    9.883252]  drm_mode_object_put+0x0/0x20
[    9.887297]  hibmc_unload+0x1c/0x80
[    9.890815]  hibmc_pci_probe+0x170/0x3c8
[    9.894773]  local_pci_probe+0x3c/0xb0
[    9.898555]  work_for_cpu_fn+0x18/0x28
[    9.902337]  process_one_work+0x1e0/0x318
[    9.906382]  worker_thread+0x228/0x450
[    9.910164]  kthread+0x128/0x130
[    9.913418]  ret_from_fork+0x10/0x18
[    9.917024] Code: a94153f3 a8c27bfd d65f03c0 d503201f (f9400c01)
[    9.923180] ---[ end trace 2695ffa0af5be375 ]---

Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Xinliang Liu <z.liuxinliang@hisilicon.com>
Signed-off-by: Xinliang Liu <z.liuxinliang@hisilicon.com>

drm: move quirk_addfb_prefer_xbgr_30bpp handling to drm_driver_legacy_fb_format too

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-7-kraxel@redhat.com

drm/virtio: fix DRM_FORMAT_* handling

Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code
on bigendian machines.  Also set the quirk_addfb_prefer_host_byte_order
mode_config bit so drm_mode_addfb() asks for the correct format code.

Both DRM_FORMAT_* and VIRTIO_GPU_FORMAT_* are defined to be little
endian, so using a different mapping on bigendian machines is wrong.
It's there because of broken drm_mode_addfb() behavior.  So with
drm_mode_addfb() being fixed we can fix this too.

While wading through the code I've noticed we have a little issue in
virtio:  We attach a format to the bo when it is created
(DRM_IOCTL_MODE_CREATE_DUMB), not when we map it as framebuffer
(DRM_IOCTL_MODE_ADDFB).  Easy way out:  Support a single format only.
Pick DRM_FORMAT_HOST_XRGB8888, it is the only one actually used in
practice.  Drop unused mappings in virtio_gpu_translate_format().

With this patch applied both ADDFB and ADDFB2 ioctls work correctly in
the virtio-gpu.ko driver on big endian machines.  Without the patch only
ADDFB (which still seems to be used by the majority of userspace) works
correctly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-6-kraxel@redhat.com

drm/bochs: support changing byteorder at mode set time

Add bochs_hw_set_*_endian() helper functions, to set the framebuffer
byteorder at mode set time.  Support both DRM_FORMAT_XRGB8888 and
DRM_FORMAT_BGRX8888 framebuffer formats, no matter what the native
machine byte order is.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-5-kraxel@redhat.com

drm/bochs: fix DRM_FORMAT_* handling for big endian machines.

Use DRM_FORMAT_HOST_XRGB8888, so we are using the correct format code
on bigendian machines.  Also set the quirk_addfb_prefer_host_byte_order
mode_config bit so drm_mode_addfb() asks for the correct format code.

Create our own plane and use drm_crtc_init_with_planes() instead of
depending on the default created by drm_crtc_init().  That way the plane
format list is correct on bigendian machines.

Also re-add the framebuffer format check dropped by "df2052cc92 bochs:
convert to drm_fb_helper_fbdev_setup/teardown".

With this patch applied both ADDFB and ADDFB2 ioctls work correctly in
the bochs-drm.ko driver on big endian machines.  Without the patch only
ADDFB (which still seems to be used by the majority of userspace) works
correctly.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-4-kraxel@redhat.com

drm: use drm_driver_legacy_fb_format in drm_gem_fbdev_fb_create

Creating framebuffers for fbdev emulation should use the correct format
code too, so switch drm_gem_fbdev_fb_create() over to use the new
drm_driver_legacy_fb_format() function.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-3-kraxel@redhat.com

drm: move native byte order quirk to new drm_driver_legacy_fb_format function

Turns out we need the pixel format fixup not only for the addfb ioctl,
but also for fbdev emulation code.

Ideally we would place it in drm_mode_legacy_fb_format().  That would
create alot of churn though, and most drivers don't care because they
never ever run on a big endian platform.  So add a new
drm_driver_legacy_fb_format() function instead which looks at the
mode_config->quirk_addfb_prefer_host_byte_order flag.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20180921134704.12826-2-kraxel@redhat.com

drm/virtio: pass virtio_gpu_object to virtio_gpu_cmd_transfer_to_host_{2d, 3d}

Pass virtio_gpu_object down to virtio_gpu_cmd_transfer_to_host_2d and
virtio_gpu_cmd_transfer_to_host_3d functions, instead of passing just
the virtio resource handle.

This is needed to lookup the scatter list of the object, for dma sync.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Jiandi An <jiandi.an@amd.com>
Tested-by: Jiandi An <jiandi.an@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20180920062924.6514-1-kraxel@redhat.com

drm/zte: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-20-noralf@tronnes.org

drm/vc4: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-19-noralf@tronnes.org

drm/tve200: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

The drm_fbdev_generic_setup() call is put after drm_dev_register() in the
driver. This is done to highlight the fact that fbdev emulation is an
internal client that makes use of the driver, it is not part of the
driver as such. If fbdev setup fails, an error is printed, but the driver
succeeds probing.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-18-noralf@tronnes.org

drm/sti: Use drm_fbdev_generic_setup()

The CMA helper is already using the drm_fb_helper_generic_probe part of
the generic fbdev emulation. This patch makes full use of the generic
fbdev emulation by using its drm_client callbacks. This means that
drm_mode_config_funcs->output_poll_changed and drm_driver->lastclose are
now handled by the emulation code. Additionally fbdev unregister happens
automatically on drm_dev_unregister().

If drm_fbdev_generic_setup() fails, an error is printed by the function.

drm_fbdev_generic_setup() handles mode_config.num_connector being zero.
In that case it retries fbdev setup on the next .output_poll_changed.

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180908134648.2582-14-noralf@tronnes.org