tcp: start receiver buffer autotuning sooner

[ Upstream commit 041a14d2671573611ffd6412bc16e2f64469f7fb ]

Previously receiver buffer auto-tuning starts after receiving
one advertised window amount of data. After the initial receiver
buffer was raised by patch a337531b942b ("tcp: up initial rmem to
128KB and SYN rwin to around 64KB"), the reciver buffer may take
too long to start raising. To address this issue, this patch lowers
the initial bytes expected to receive roughly the expected sender's
initial window.

Fixes: a337531b942b ("tcp: up initial rmem to 128KB and SYN rwin to around 64KB")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Wei Wang <weiwan@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: dts: omap5: Fix dual-role mode on Super-Speed port

[ Upstream commit a763ecc15d0e37c3a15ff6825183061209832685 ]

OMAP5's Super-Speed USB port has a software mailbox register
that needs to be fed with VBUS and ID events from an external
VBUS/ID comparator.

Without this, Host role will not work correctly.

Fixes: 656c1a65ab55 ("ARM: dts: omap5: enable OTG role for DWC3 controller")
Reported-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mlxsw: spectrum_switchdev: Check notification relevance based on upper device

[ Upstream commit 5050f6ae253ad1307af3486c26fc4f94287078b7 ]

VxLAN FDB updates are sent with the VxLAN device which is not our upper
and will therefore be ignored by current code.

Solve this by checking whether the upper device (bridge) is our upper.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: rockchip: initialize dma_slave_config properly

[ Upstream commit dd8fd2cbc73f8650f651da71fc61a6e4f30c1566 ]

The rxconf and txconf structs are allocated on the
stack, so make sure we zero them before filling out
the relevant fields.

Signed-off-by: Huibin Hong <huibin.hong@rock-chips.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: minstrel: fix sampling/reporting of CCK rates in HT mode

[ Upstream commit 972b66b86f85f4e8201db454f4c3e9d990cf9836 ]

Long/short preamble selection cannot be sampled separately, since it
depends on the BSS state. Because of that, sampling attempts to
currently not used preamble modes are not counted in the statistics,
which leads to CCK rates being sampled too often.

Fix statistics accounting for long/short preamble by increasing the
index where necessary.
Fix excessive CCK rate sampling by dropping unsupported sample attempts.

This improves throughput on 2.4 GHz channels

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: minstrel: fix CCK rate group streams value

[ Upstream commit 80df9be67c44cb636bbc92caeddad8caf334c53c ]

Fixes a harmless underflow issue when CCK rates are actively being used

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mac80211: minstrel: fix using short preamble CCK rates on HT clients

[ Upstream commit 37439f2d6e43ae79e22be9be159f0af157468f82 ]

mi->supported[MINSTREL_CCK_GROUP] needs to be updated
short preamble rates need to be marked as supported regardless of
whether it's currently enabled. Its state can change at any time without
a rate_update call.

Fixes: 782dda00ab8e ("mac80211: minstrel_ht: move short preamble check out of get_rate")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

misc: cxl: Fix possible null pointer dereference

[ Upstream commit 3dac3583bf1a61db6aaf31dfd752c677a4400afd ]

It is not safe to dereference an object before a null test. It is
not needed and just remove them. Ftrace can be used instead.

Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Acked-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

netfilter: nft_compat: do not dump private area

[ Upstream commit d701d8117200399d85e63a737d2e4e897932f3b6 ]

Zero pad private area, otherwise we expose private kernel pointer to
userspace. This patch also zeroes the tail area after the ->matchsize
and ->targetsize that results from XT_ALIGN().

Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables")
Reported-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: sched: avoid writing on noop_qdisc

[ Upstream commit f98ebd47fd0da1717267ce1583a105d8cc29a16a ]

While noop_qdisc.gso_skb and noop_qdisc.skb_bad_txq are not used
in other places, it seems not correct to overwrite their fields
in dev_init_scheduler_queue().

noop_qdisc is essentially a shared and read-only object, even if
it is not marked as const because of some implementation detail.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

selftests: forwarding: Have lldpad_app_wait_set() wait for unknown, too

[ Upstream commit 372809055f6c830ff978564e09f58bcb9e9b937c ]

Immediately after mlxsw module is probed and lldpad started, added APP
entries are briefly in "unknown" state before becoming "pending". That's
the state that lldpad_app_wait_set() typically sees, and since there are
no pending entries at that time, it bails out. However the entries have
not been pushed to the kernel yet at that point, and thus the test case
fails.

Fix by waiting for both unknown and pending entries to disappear before
proceeding.

Fixes: d159261f3662 ("selftests: mlxsw: Add test for trust-DSCP")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (npcm-750-pwm-fan) Change initial pwm target to 255

[ Upstream commit f21c8e753b1dcb8f9e5b096db1f7f4e6fdfa7258 ]

Change initial PWM target to 255 to prevent overheating, for example
when BMC hangs in userspace or when userspace fan control application is
not implemented yet.

Signed-off-by: Kun Yi <kunyi@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (ina3221) Fix INA3221_CONFIG_MODE macros

[ Upstream commit 791ebc9d34e9d212fc03742c31654b017d385926 ]

The three INA3221_CONFIG_MODE macros are not correctly defined here.
The MODE3-1 bits are located at BIT 2-0 according to the datasheet.

So this patch just fixes them by shifting all of them with a correct
offset. However, this isn't a crital bug fix as the driver does not
use any of them at this point.

Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (pwm-fan) Silence error on probe deferral

[ Upstream commit 9f67f7583e77fe5dc57aab3a6159c2642544eaad ]

Probe deferrals aren't actual errors, so silence the error message in
case the PWM cannot yet be acquired.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (nct6775) Fix names of DIMM temperature sources

[ Upstream commit 3be8c9d103534fadc72b3e174613f37aa19fa423 ]

For NCT6795D and NCT6796D, the DIMM temperature sources are named
"Agent[01] Dimm [01]" per datasheet. Match names in datasheets to
avoid confusion.

Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

hwmon: (k10temp) Support all Family 15h Model 6xh and Model 7xh processors

[ Upstream commit 53dfa0088edd2e2793afa21488532b12eb2dae48 ]

BIOS developer guides refer to Family 15h Models 60h-6fh and Family 15h
Models 70h-7fh. So far the driver only checked for Models 60h and 70h.
However, there are now processors with other model numbers in the same
families. Example is A10-9620P family 15h model 65h. Follow the developer
guides and mask the lower 4 bit of the model number to determine the
registers to use for reading temperatures and temperature limits.

Reported-by: Guglielmo Fanini <g.fanini@gmail.com>
Cc: Guglielmo Fanini <g.fanini@gmail.com>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

scsi: arcmsr: clean up clang warning on extraneous parentheses

[ Upstream commit ca2ade24157693b4e533ccec69df00ef719d4aad ]

There are extraneous parantheses that are causing clang to produce a
warning so remove these.

Clean up 3 clang warnings:
equality comparison with extraneous parentheses [-Wparentheses-equality]

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Ching Huang <ching2048@areca.com.tw>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: gemini: Fix up TVC clock group

[ Upstream commit a85c928f6a7856a09e47d9b37faa3407c7ac6a8e ]

The previous fix made the TVC clock get muxed in on the
D-Link DIR-685 instead of giving nagging warnings of this
not working. Not good. We didn't want that, as it breaks
video.

Create a specific group for the TVC CLK, and break out
a specific GPIO group for it on the SL3516 so we can use
that line as GPIO if we don't need the TVC CLK.

Fixes: d17f477c5bc6 ("pinctrl: gemini: Mask and set properly")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

orangefs: rate limit the client not running info message

[ Upstream commit 2978d873471005577e7b68a528b4f256a529b030 ]

Currently accessing various /sys/fs/orangefs files will spam the
kernel log with the following info message when the client is not
running:

[  491.489284] sysfs_service_op_show: Client not running :-5:

Rate limit this info message to make it less spammy.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/mm: Do not warn about PCI BIOS W+X mappings

[ Upstream commit c200dac78fec66d87ef262cac38cfe4feabdf737 ]

PCI BIOS requires the BIOS area 0x0A0000-0x0FFFFFF to be mapped W+X for
various legacy reasons. When CONFIG_DEBUG_WX is enabled, this triggers the
WX warning, but this is misleading because the mapping is required and is
not a result of an accidental oversight.

Prevent the full warning when PCI BIOS is enabled and the detected WX
mapping is in the BIOS area. Just emit a pr_warn() which denotes the
fact. This is partially duplicating the info which the PCI BIOS code emits
when it maps the area as executable, but that info is not in the context of
the WX checking output.

Remove the extra %p printout in the WARN_ONCE() while at it. %pS is enough.

Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Borislav Petkov <bp@suse.de>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1810082151160.2455@nanos.tec.linutronix.de
Signed-off-by: Sasha Levin <sashal@kernel.org>

ARM: 8802/1: Call syscall_trace_exit even when system call skipped

[ Upstream commit f18aef742c8fbd68e280dff0a63ba0ca6ee8ad85 ]

On at least x86 and ARM64, and as documented in the ptrace man page
a skipped system call will still cause a syscall exit ptrace stop.

Previous to this commit 32-bit ARM did not, resulting in strace
being confused when seccomp skips system calls.

This change also impacts programs that use ptrace to skip system calls.

Fixes: ad75b51459ae ("ARM: 7579/1: arch/allow a scno of -1 to not cause a SIGILL")
Signed-off-by: Timothy E Baldwin <T.E.Baldwin99@members.leeds.ac.uk>
Signed-off-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Eugene Syromyatnikov <evgsyr@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: spidev: Fix OF tree warning logic

[ Upstream commit 605b3bec73cbd74b4ac937b580cd0b47d1300484 ]

spidev will make a big fuss if a device tree node binds a device by
using "spidev" as the node's compatible property.

However, the logic for this isn't looking for "spidev" in the
compatible, but rather checking that the device is NOT compatible with
spidev's list of devices.

This causes a false positive if a device not named "rohm,dh2228fv", etc.
binds to spidev, even if a means other than putting "spidev" in the
device tree was used.  E.g., the sysfs driver_override attribute.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

pinctrl: gemini: Mask and set properly

[ Upstream commit d17f477c5bc6b4a5dd9f51ae263870da132a8e89 ]

The code was written under the assumption that the
regmap_update_bits() would mask the bits in the mask and
set the bits in the value.

It missed the points that it will not set bits in the value
unless these are also masked in the mask. Set value bits
that are not in the mask will simply be ignored.

Fixes: 06351d133dea ("pinctrl: add a Gemini SoC pin controller")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

spi: fsl-lpspi: Prevent FIFO under/overrun by default

[ Upstream commit de8978c388c66b8fca192213ec9f0727e964c652 ]

Certain devices don't work well when a transmit FIFO underrun or
receive FIFO overrun occurs. Example is the SAF400x radio chip when
running at high speed which leads to garbage being sent to/received from
the chip. In which case, it should stall waiting for further data to be
available before proceeding. This patch unset the NOSTALL bit in CFGR1
by default to prevent this issue.

Signed-off-by: Hieu Tran Dang <dangtranhieu2012@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gpio: syscon: Fix possible NULL ptr usage

[ Upstream commit 70728c29465bc4bfa7a8c14304771eab77e923c7 ]

The priv->data->set can be NULL while flags contains GPIO_SYSCON_FEAT_OUT
and chip->set is valid pointer. This happens in case the controller uses
the default GPIO setter. Always use chip->set to access the setter to avoid
possible NULL pointer dereferencing.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: fix generic XDP to handle if eth header was mangled

[ Upstream commit 2972495699320229b55b8e5065a310be5c81485b ]

XDP can modify (and resize) the Ethernet header in the packet.

There is a bug in generic-XDP, because skb->protocol and skb->pkt_type
are setup before reaching (netif_receive_)generic_xdp.

This bug was hit when XDP were popping VLAN headers (changing
eth->h_proto), as skb->protocol still contains VLAN-indication
(ETH_P_8021Q) causing invocation of skb_vlan_untag(skb), which corrupt
the packet (basically popping the VLAN again).

This patch catch if XDP changed eth header in such a way, that SKB
fields needs to be updated.

V2: on request from Song Liu, use ETH_HLEN instead of mac_len,
in __skb_push() as eth_type_trans() use ETH_HLEN in paired skb_pull_inline().

Fixes: d445516966dc ("net: xdp: support xdp generic on virtual devices")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bpf: btf: Fix a missing check bug

[ Upstream commit 8af03d1ae2e154a8be3631e8694b87007e1bdbc2 ]

In btf_parse_hdr(), the length of the btf data header is firstly copied
from the user space to 'hdr_len' and checked to see whether it is larger
than 'btf_data_size'. If yes, an error code EINVAL is returned. Otherwise,
the whole header is copied again from the user space to 'btf->hdr'.
However, after the second copy, there is no check between
'btf->hdr->hdr_len' and 'hdr_len' to confirm that the two copies get the
same value. Given that the btf data is in the user space, a malicious user
can race to change the data between the two copies. By doing so, the user
can provide malicious data to the kernel and cause undefined behavior.

This patch adds a necessary check after the second copy, to make sure
'btf->hdr->hdr_len' has the same value as 'hdr_len'. Otherwise, an error
code EINVAL will be returned.

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/kexec: Correct KEXEC_BACKUP_SRC_END off-by-one error

[ Upstream commit 51fbf14f2528a8c6401290e37f1c893a2412f1d3 ]

The only use of KEXEC_BACKUP_SRC_END is as an argument to
walk_system_ram_res():

  int crash_load_segments(struct kimage *image)
  {
    ...
    walk_system_ram_res(KEXEC_BACKUP_SRC_START, KEXEC_BACKUP_SRC_END,
                        image, determine_backup_region);

walk_system_ram_res() expects "start, end" arguments that are inclusive,
i.e., the range to be walked includes both the start and end addresses.

KEXEC_BACKUP_SRC_END was previously defined as (640 * 1024UL), which is the
first address *past* the desired 0-640KB range.

Define KEXEC_BACKUP_SRC_END as (640 * 1024UL - 1) so the KEXEC_BACKUP_SRC
region is [0-0x9ffff], not [0-0xa0000].

Fixes: dd5f726076cc ("kexec: support for kexec on panic using new system call")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Brijesh Singh <brijesh.singh@amd.com>
CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CC: Ingo Molnar <mingo@redhat.com>
CC: Lianbo Jiang <lijiang@redhat.com>
CC: Takashi Iwai <tiwai@suse.de>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Tom Lendacky <thomas.lendacky@amd.com>
CC: Vivek Goyal <vgoyal@redhat.com>
CC: baiyaowei@cmss.chinamobile.com
CC: bhe@redhat.com
CC: dan.j.williams@intel.com
CC: dyoung@redhat.com
CC: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/153805811578.1157.6948388946904655969.stgit@bhelgaas-glaptop.roam.corp.google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: consider max hw sectors supported for max_write_pgs

[ Upstream commit 8a57fc3823d08edb1661a06d9e0a8c2365ac561e ]

When do GC, the number of read/write sectors are determined
by max_write_pgs(see gc_rq preparation in pblk_gc_line_prepare_ws).

Due to max_write_pgs doesn't consider max hw sectors
supported by nvme controller(128K), which leads to GC
tries to read 64 * 4K in one command, and see below error
caused by pblk_bio_map_addr in function pblk_submit_read_gc.

[ 2923.005376] pblk: could not add page to bio
[ 2923.005377] pblk: could not allocate GC bio (18446744073709551604)

Signed-off-by: Zhoujie Wu <zjwu@marvell.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: fix error handling of pblk_lines_init()

[ Upstream commit a70985f83c625a5eaf618be81621e5e4521a66c6 ]

In the too many bad blocks error handling case, we should release all
the allocated resources, otherwise it will cause memory leak.

Fixes: 2deeefc02dff ("lightnvm: pblk: fail gracefully on line alloc. failure")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: do no update csecs and sos on 1.2

[ Upstream commit 6fd05cad5ee1290b276dd8ed90a1e019b1fa577a ]

1.2 devices exposes their data and metadata size through the separate
identify command. Make sure that the NVMe LBA format does not override
these values.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: guarantee mw_cunits on read buffer

[ Upstream commit d672d92d9c433c365fd6cdb4da1c02562b5f1178 ]

OCSSD 2.0 defines the amount of data that the host must buffer per chunk
to guarantee reads through the geometry field mw_cunits. This value is
the base that pblk uses to determine the size of its read buffer.
Currently, this size is set to be the closes power-of-2 to mw_cunits
times the number of parallel units available to the pblk instance for
each open line (currently one). When an entry (4KB) is put in the
buffer, the L2P table points to it. As the buffer wraps up, the L2P is
updated to point to addresses on the device, thus guaranteeing mw_cunits
at a chunk level.

However, given that pblk cannot write to the device under ws_min
(normally ws_opt), there might be a window in which the buffer starts
wrapping up and updating L2P entries before the mw_cunits value in a
chunk has been surpassed.

In order not to violate the mw_cunits constrain in this case, account
for ws_opt on the read buffer creation.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: fix write amplificiation calculation

[ Upstream commit 765462fa4c4d0fd3eb718f2ba14cb04c35219854 ]

When the user data counter exceeds 32 bits, the write amplification
calculation does not provide the right value. Fix this by using
div64_u64 in stead of div64.

Fixes: 76758390f83e ("lightnvm: pblk: export write amplification counters to sysfs")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: guarantee emeta on line close

[ Upstream commit 9cc85bc761f83da41935cdd6edcdb7c122bc90bf ]

If a line is recovered from open chunks, the memory structures for
emeta have not necessarily been properly set on line initialization.
When closing a line, make sure that emeta is consistent so that the line
can be recovered on the fast path on next reboot.

Also, remove a couple of empty lines at the end of the function.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: fix incorrect min_write_pgs

[ Upstream commit 8bbd45d02a118cbefdf4e1a6274bd965a6aa3c59 ]

The calculation of pblk->min_write_pgs should only use the optimal
write size attribute provided by the drive, it does not correlate to
the memory page size of the system, which can be smaller or larger
than the LBA size reported.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

lightnvm: pblk: fix rqd.error return value in pblk_blk_erase_sync

[ Upstream commit 4b5d56edb8fc565c5db029aecaea598eadfba7f6 ]

rqd.error is masked by the return value of pblk_submit_io_sync.
The rqd structure is then passed on to the end_io function, which
assumes that any error should lead to a chunk being marked
offline/bad. Since the pblk_submit_io_sync can fail before the
command is issued to the device, the error value maybe not correspond
to a media failure, leading to chunks being immaturely retired.

Also, the pblk_blk_erase_sync function prints an error message in case
the erase fails. Since the caller prints an error message by itself,
remove the error message in this function.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Reviewed-by: Javier González <javier@cnexlabs.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ALSA: hda/ca0132 - Fix input effect controls for desktop cards

[ Upstream commit 7a2dc84fc480aec4f8f96e152327423014edf668 ]

This patch removes the echo cancellation control for desktop cards, and
makes use of the special 0x47 SCP command for noise reduction.

Signed-off-by: Connor McAdams <conmanx360@gmail.com>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: venus: vdec: fix decoded data size

[ Upstream commit ce32c0a530bd955206fe45c2eff77e581202d699 ]

Existing code returns the max of the decoded size and buffer size.
It turns out that buffer size is always greater due to hardware
alignment requirement. As a result, payload size given to client
is incorrect. This change ensures that the bytesused is assigned
to actual payload size, when available.

Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx231xx: fix potential sign-extension overflow on large shift

[ Upstream commit 32ae592036d7aeaabcccb2b1715373a68639a768 ]

Shifting the u8 value[3] by an int can lead to sign-extension
overflow. For example, if value[3] is 0xff and the shift is 24 then it
is promoted to int and then the top bit is sign-extended so that all
upper 32 bits are set.  Fix this by casting value[3] to a u32 before
the shift.

Detected by CoverityScan, CID#1016522 ("Unintended sign extension")

Fixes: e0d3bafd0258 ("V4L/DVB (10954): Add cx231xx USB driver")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

GFS2: Flush the GFS2 delete workqueue before stopping the kernel threads

[ Upstream commit 1eb8d7387908022951792a46fa040ad3942b3b08 ]

Flushing the workqueue can cause operations to happen which might
call gfs2_log_reserve(), or get stuck waiting for locks taken by such
operations.  gfs2_log_reserve() can io_schedule(). If this happens, it
will never wake because the only thing which can wake it is gfs2_logd()
which was already stopped.

This causes umount of a gfs2 filesystem to wedge permanently if, for
example, the umount immediately follows a large delete operation.

When this occured, the following stack trace was obtained from the
umount command

[<ffffffff81087968>] flush_workqueue+0x1c8/0x520
[<ffffffffa0666e29>] gfs2_make_fs_ro+0x69/0x160 [gfs2]
[<ffffffffa0667279>] gfs2_put_super+0xa9/0x1c0 [gfs2]
[<ffffffff811b7edf>] generic_shutdown_super+0x6f/0x100
[<ffffffff811b7ff7>] kill_block_super+0x27/0x70
[<ffffffffa0656a71>] gfs2_kill_sb+0x71/0x80 [gfs2]
[<ffffffff811b792b>] deactivate_locked_super+0x3b/0x70
[<ffffffff811b79b9>] deactivate_super+0x59/0x60
[<ffffffff811d2998>] cleanup_mnt+0x58/0x80
[<ffffffff811d2a12>] __cleanup_mnt+0x12/0x20
[<ffffffff8108c87d>] task_work_run+0x7d/0xa0
[<ffffffff8106d7d9>] exit_to_usermode_loop+0x73/0x98
[<ffffffff81003961>] syscall_return_slowpath+0x41/0x50
[<ffffffff815a594c>] int_ret_from_sys_call+0x25/0x8f
[<ffffffffffffffff>] 0xffffffffffffffff

Signed-off-by: Tim Smith <tim.smith@citrix.com>
Signed-off-by: Mark Syms <mark.syms@citrix.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: isif: fix a NULL pointer dereference bug

[ Upstream commit a26ac6c1bed951b2066cc4b2257facd919e35c0b ]

In isif_probe(), there is a while loop to get the ISIF base address and
linearization table0 and table1 address. In the loop body, the function
platform_get_resource() is called to get the resource. If
platform_get_resource() returns NULL, the loop is terminated and the
execution goes to 'fail_nobase_res'. Suppose the loop is terminated at the
first iteration because platform_get_resource() returns NULL and the
execution goes to 'fail_nobase_res'. Given that there is another while loop
at 'fail_nobase_res' and i equals to 0, one iteration of the second while
loop will be executed. However, the second while loop does not check the
return value of platform_get_resource(). This can cause a NULL pointer
dereference bug if the return value is a NULL pointer.

This patch avoids the above issue by adding a check in the second while
loop after the call to platform_get_resource().

Signed-off-by: Wenwen Wang <wang6495@umn.edu>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: Give error on attempt to set log buffer length to over 2G

[ Upstream commit e6fe3e5b7d16e8f146a4ae7fe481bc6e97acde1e ]

The current printk() is ready to handle log buffer size up to 2G.
Give an explicit error for users who want to use larger log buffer.

Also fix printk formatting to show the 2G as a positive number.

Link: http://lkml.kernel.org/r/20181008135916.gg4kkmoki5bgtco5@pathway.suse.cz
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Suggested-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: He Zhe <zhe.he@windriver.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
[pmladek: Fixed to the really safe limit 2GB.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mfd: ti_am335x_tscadc: Keep ADC interface on if child is wakeup capable

[ Upstream commit c974ac771479327b5424f60d58845e31daddadea ]

If a child device like touchscreen is wakeup capable, then keep ADC
interface on, so that a touching resistive screen will generate wakeup
event to the system.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

backlight: lm3639: Unconditionally call led_classdev_unregister

[ Upstream commit 7cea645ae9c5a54aa7904fddb2cdf250acd63a6c ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context.

drivers/video/backlight/lm3639_bl.c:403:14: warning: address of
'pchip->cdev_torch' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pchip->cdev_torch)
        ~~   ~~~~~~~^~~~~~~~~~
drivers/video/backlight/lm3639_bl.c:405:14: warning: address of
'pchip->cdev_flash' will always evaluate to 'true'
[-Wpointer-bool-conversion]
        if (&pchip->cdev_flash)
        ~~   ~~~~~~~^~~~~~~~~~
2 warnings generated.

These statements have been present since 2012, introduced by
commit 0f59858d5119 ("backlight: add new lm3639 backlight
driver"). Given that they have been called unconditionally since
then presumably without any issues, removing the always true if
statements to fix the warnings without any real world changes.

Link: https://github.com/ClangBuiltLinux/linux/issues/119
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

proc/vmcore: Fix i386 build error of missing copy_oldmem_page_encrypted()

[ Upstream commit cf089611f4c446285046fcd426d90c18f37d2905 ]

Lianbo reported a build error with a particular 32-bit config, see Link
below for details.

Provide a weak copy_oldmem_page_encrypted() function which architectures
can override, in the same manner other functionality in that file is
supplied.

Reported-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
CC: x86@kernel.org
Link: http://lkml.kernel.org/r/710b9d95-2f70-eadf-c4a1-c3dc80ee4ebb@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kasan: avoid user access code instrumentation

[ Upstream commit b6cbe3e8bdff6f21f1b58b08a55f479cdcf98282 ]

Kasan instrumentation adds "store" check for variables marked as
modified by inline assembly. With user pointers containing addresses
from another address space this produces false positives.

static inline unsigned long clear_user_xc(void __user *to, ...)
{
asm volatile(
...
: "+a" (to) ...

User space access functions are wrapped by manually instrumented
functions in kasan common code, which should be sufficient to catch
errors. So, we just disable uaccess.o instrumentation altogether.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kasan: avoid instrumentation of early C code

[ Upstream commit 0a9b40911baffac6fc9cc2d88e893585870a97f7 ]

Instrumented C code cannot run without the kasan shadow area. Exempt
source code files from kasan which are running before / used during
kasan initialization.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

s390/kasan: avoid vdso instrumentation

[ Upstream commit 348498458505e202df41b6b9a78da448d39298b7 ]

vdso is mapped into user space processes, which won't have kasan
shodow mapped.

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: mmci: expand startbiterr to irqmask and error check

[ Upstream commit daf9713c5ef8c3ffb0bdf7de11b53b2b2756c4f1 ]

All variants don't pretend to have a startbiterr.
-While data error check, if status register return an error
(like  MCI_DATACRCFAIL) we must avoid to check MCI_STARTBITERR
(if not desired).
-expand start_err to MCI_IRQENABLE to avoid to set this bit by default.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/intel_rdt: CBM overlap should also check for overlap with CDP peer

[ Upstream commit e5f3530c391105fdd6174852e3ea6136d073b45a ]

The CBM overlap test is used to manage the allocations of RDT resources
where overlap is possible between resource groups. When a resource group
is in exclusive mode then there should be no overlap between resource
groups.

The current overlap test only considers overlap between the same
resources, for example, that usage of a RDT_RESOURCE_L2DATA resource
in one resource group does not overlap with usage of a RDT_RESOURCE_L2DATA
resource in another resource group. The problem with this is that it
allows overlap between a RDT_RESOURCE_L2DATA resource in one resource
group with a RDT_RESOURCE_L2CODE resource in another resource group -
even if both resource groups are in exclusive mode. This is a problem
because even though these appear to be different resources they end up
sharing the same underlying hardware and thus does not fulfill the
user's request for exclusive use of hardware resources.

Fix this by including the CDP peer (if there is one) in every CBM
overlap test. This does not impact the overlap between resources
within the same exclusive resource group that is allowed.

Fixes: 49f7b4efa110 ("x86/intel_rdt: Enable setting of exclusive mode")
Reported-by: Jithu Joseph <jithu.joseph@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jithu Joseph <jithu.joseph@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: tony.luck@intel.com
Cc: gavin.hindman@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/e538b7f56f7ca15963dce2e00ac3be8edb8a68e1.1538603665.git.reinette.chatre@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/intel_rdt: Introduce utility to obtain CDP peer

[ Upstream commit 521348b011d64cf3febb10b64ba5b472681bef94 ]

Introduce a utility that, when provided with a RDT resource and an
instance of this RDT resource (a RDT domain), would return pointers to
the RDT resource and RDT domain that share the same hardware. This is
specific to the CDP resources that share the same hardware.

For example, if a pointer to the RDT_RESOURCE_L2DATA resource (struct
rdt_resource) and a pointer to an instance of this resource (struct
rdt_domain) is provided, then it will return a pointer to the
RDT_RESOURCE_L2CODE resource as well as the specific instance that
shares the same hardware as the provided rdt_domain.

This utility is created in support of the "exclusive" resource group
mode where overlap of resource allocation between resource groups need
to be avoided. The overlap test need to consider not just the matching
resources, but also the resources that share the same hardware.

Temporarily mark it as unused in support of patch testing to avoid
compile warnings until it is used.

Fixes: 49f7b4efa110 ("x86/intel_rdt: Enable setting of exclusive mode")
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Jithu Joseph <jithu.joseph@intel.com>
Acked-by: Fenghua Yu <fenghua.yu@intel.com>
Cc: tony.luck@intel.com
Cc: gavin.hindman@intel.com
Cc: dave.hansen@intel.com
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/9b4bc4d59ba2e903b6a3eb17e16ef41a8e7b7c3e.1538603665.git.reinette.chatre@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: devices: m25p80: Make sure WRITE_EN is issued before each write

[ Upstream commit 3baa8ec88c2feb902328e59a4dcf0f0aaab7d2ff ]

Some SPI controllers can't write nor->page_size bytes in a single step
because their TX FIFO is too small, but when that happens we should
make sure a WRITE_EN command before each write access and READ_SR command
after each write access is issued.

The core is already taking care of that, so all we have to do here is
return the actual number of bytes that were written during the
spi_mem_exec_op() operation.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mtd: spi-nor: cadence-quadspi: Use proper enum for dma_[un]map_single

[ Upstream commit 900f5e0d8c9edc5dacc57873d22aee2ae699a8e1 ]

Clang warns when one enumerated type is converted implicitly to another.

drivers/mtd/spi-nor/cadence-quadspi.c:962:47: warning: implicit
conversion from enumeration type 'enum dma_transfer_direction' to
different enumeration type 'enum dma_data_direction' [-Wenum-conversion]
        dma_dst = dma_map_single(nor->dev, buf, len, DMA_DEV_TO_MEM);
                  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
./include/linux/dma-mapping.h:428:66: note: expanded from macro
'dma_map_single'
                                   ~~~~~~~~~~~~~~~~~~~~          ^
drivers/mtd/spi-nor/cadence-quadspi.c:997:43: warning: implicit
conversion from enumeration type 'enum dma_transfer_direction' to
different enumeration type 'enum dma_data_direction' [-Wenum-conversion]
        dma_unmap_single(nor->dev, dma_dst, len, DMA_DEV_TO_MEM);
        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~
./include/linux/dma-mapping.h:429:70: note: expanded from macro
'dma_unmap_single'
                                     ~~~~~~~~~~~~~~~~~~~~~~          ^
2 warnings generated.

Use the proper enums from dma_data_direction to satisfy Clang.

DMA_FROM_DEVICE = DMA_DEV_TO_MEM = 2

Link: https://github.com/ClangBuiltLinux/linux/issues/108
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cx18: Don't check for address of video_dev

[ Upstream commit eb1ca9a428fdc3f98be4898f6cd8bcb803878619 ]

Clang warns that the address of a pointer will always evaluated as true
in a boolean context.

drivers/media/pci/cx18/cx18-driver.c:1255:23: warning: address of
'cx->streams[i].video_dev' will always evaluate to 'true'
[-Wpointer-bool-conversion]
                if (&cx->streams[i].video_dev)
                ~~   ~~~~~~~~~~~~~~~^~~~~~~~~
1 warning generated.

Check whether v4l2_dev is null, not the address, so that the statement
doesn't fire all the time. This check has been present since 2009,
introduced by commit 21a278b85d3c ("V4L/DVB (11619): cx18: Simplify the
work handler for outgoing mailbox commands")

Reported-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dw9807-vcm: Fix probe error handling

[ Upstream commit 9e5b5081fa117ae34eca94b63b1cb6d43dc28f10 ]

v4l2_async_unregister_subdev() may not be called without
v4l2_async_register_subdev() being called first. Fix this.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: dw9714: Fix error handling in probe function

[ Upstream commit f9a0b14240a2d0bd196d35e8aac73df6eabd6382 ]

Fixed the case where v4l2_async_unregister_subdev()
is called unnecessarily in the error handling path
in probe function.

Signed-off-by: Rajmohan Mani <rajmohan.mani@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

platform/x86: mlx-platform: Properly use mlxplat_mlxcpld_msn201x_items

[ Upstream commit 8289c4b6f2e53750de78bd38cecb6bce4d7a988c ]

Clang warns that mlxplat_mlxcpld_msn201x_items is not going to be
emitted in the final assembly because it's only used in ARRAY_SIZE right
now, which is a compile time evaluation since the array's size is known.

drivers/platform/x86/mlx-platform.c:555:32: warning: variable
'mlxplat_mlxcpld_msn201x_items' is not needed and will not be emitted
[-Wunneeded-internal-declaration]
static struct mlxreg_core_item mlxplat_mlxcpld_msn201x_items[] = {
                               ^
1 warning generated.

It appears this was a copy and paste mistake from when this item was
first added. Use the definition in mlxplat_mlxcpld_msn201x_data so that
Clang no longer warns.

Link: https://github.com/ClangBuiltLinux/linux/issues/141
Fixes: a49a41482f61 ("platform/x86: mlx-platform: Add support for new msn201x system type")
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Vadim Pasternak <vadimp@mellanox.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: recal cached_dev_sectors on detach

[ Upstream commit 46010141da6677b81cc77f9b47f8ac62bd1cbfd3 ]

Recal cached_dev_sectors on cached_dev detached, as recal done on
cached_dev attached.

Update the cached_dev_sectors before bcache_device_detach called
as bcache_device_detach will set bcache_device->c to NULL.

Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

bcache: account size of buckets used in uuid write to ca->meta_sectors_written

[ Upstream commit 7a55948d38eb9b274cbbdd56dc1dd4b96ebfbe04 ]

UUIDs are considered as metadata. __uuid_write should add the number
of buckets (in sectors) written to disk to ca->meta_sectors_written.
Currently only 1 bucket is used in uuid write.

Steps to test:
1) create a fresh backing device and a fresh cache device separately.
   The backing device didn't attach to any cache set.
2) cd /sys/block/<cache device>/bcache
   cat metadata_written      // record the output value
   cat bucket_size
3) attach the backing device to cache set
4) cat metadata_written
   The output value is almost the same as the value in step 2
   before the change.
   After the change, the value is bigger about 1 bucket size.

Signed-off-by: Shenghui Wang <shhuiw@foxmail.com>
Reviewed-by: Tang Junhui <tang.junhui.linux@gmail.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>

reset: Fix potential use-after-free in __of_reset_control_get()

[ Upstream commit b790c8ea5593d6dc3580adfad8e117eeb56af874 ]

Calling of_node_put() decreases the reference count of a device tree
object, and may free some data.

However, the of_phandle_args structure embedding it is passed to
reset_controller_dev.of_xlate() after that, so it may still be accessed.

Move the call to of_node_put() down to fix this.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[p.zabel@pengutronix.de: moved of_node_put after mutex_unlock]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: fix broken menu dependencies

[ Upstream commit aae3394ef0ef90cf00a21133357448385f13a5d4 ]

The framebuffer options and devices menu is unintentionally split
or broken because some items in it do not depend on FB (including
several under omap and mmp).
Fix this by moving FB_CMDLINE, FB_NOTIFY, and FB_CLPS711X_OLD to
just before the FB Kconfig symbol definition and by moving the
omap, omap2, and mmp menus to last, following FB_SM712.

Also, the FB_VIA dependencies are duplicated by both being inside
an "if FB_VIA/endif" block and "depends on FB_VIA", so drop the
"depends on FB_VIA" lines since they are redundant.

Fixes: ea6763c104c9 ("video/fbdev: Always built-in video= cmdline parsing")
Fixes: 5ec9653806ba ("fbdev: Make fb-notify a no-op if CONFIG_FB=n")
Fixes: ef74d46a4ef3 ("video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: sbuslib: integer overflow in sbusfb_ioctl_helper()

[ Upstream commit e5017716adb8aa5c01c52386c1b7470101ffe9c5 ]

The "index + count" addition can overflow.  Both come directly from the
user.  This bug leads to an information leak.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Peter Malone <peter.malone@gmail.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

fbdev: sbuslib: use checked version of put_user()

[ Upstream commit d8bad911e5e55e228d59c0606ff7e6b8131ca7bf ]

I'm not sure why the code assumes that only the first put_user() needs
an access_ok() check.  I have made all the put_user() and get_user()
calls checked.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Mathieu Malaterre <malat@debian.org>
Cc: Peter Malone <peter.malone@gmail.com>,
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

atmel_lcdfb: support native-mode display-timings

[ Upstream commit 60e5e48dba72c6b59a7a9c7686ba320766913368 ]

When a device tree set a display-timing using native-mode
then according to the bindings doc this should:

    native-mode:
    The native mode for the display, in case multiple
    modes are provided.
    When omitted, assume the first node is the native.

The atmel_lcdfb used the last timing subnode and did not
respect the timing mode specified with native-mode.

Introduce use of of_get_videomode() which allowed
a nice simplification of the code while also
added support for native-mode.

As a nice side-effect this fixes a memory leak where the
data used for timings and the display_np was not freed.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi_internal_dmac: set scatter/gather max segment size

[ Upstream commit 54541815b43f4e49c82628bf28bbb31d86d2f58a ]

Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a
device_dma_parameters structure and filling in the max segment size. The
size used is the result of a discussion with Renesas hardware engineers
and unfortunately not found in the datasheet.

  renesas_sdhi_internal_dmac ee140000.sd: DMA-API: mapping sg segment
  longer than device claims to support [len=126976] [max=65536]

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
[wsa: simplified some logic after validating intended dma_parms life cycle
      and added comment]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: tmio: Fix SCC error detection

[ Upstream commit b85fb0a1c8aeaaa40d08945d51a6656b512173f0 ]

SDR104, HS200 and HS400 need to check for SCC error. If SCC error is
detected, retuning is necessary.

Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com>
[Niklas: update commit message]
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

mmc: renesas_sdhi_internal_dmac: Whitelist r8a774a1

[ Upstream commit 2e1501a8bdd49eaa0e967c0ad00e9dcd68d0b30f ]

We need r8a774a1 to be whitelisted for SDHI to work on the RZ/G2M,
but we don't care about the revision of the SoC, so just whitelist
the generic part number.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/fsgsbase/64: Fix ptrace() to read the FS/GS base accurately

[ Upstream commit 07e1d88adaaeab247b300926f78cc3f950dbeda3 ]

On 64-bit kernels ptrace can read the FS/GS base using the register access
APIs (PTRACE_PEEKUSER, etc.) or PTRACE_ARCH_PRCTL.

Make both of these mechanisms return the actual FS/GS base.

This will improve debuggability by providing the correct information
to ptracer such as GDB.

[ chang: Rebased and revised patch description. ]
[ mingo: Revised the changelog some more. ]

Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Markus T Metzger <markus.t.metzger@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1537312139-5580-2-git-send-email-chang.seok.bae@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xsk: proper AF_XDP socket teardown ordering

[ Upstream commit 541d7fdd7694560404c502f64298a90ffe017e6b ]

The AF_XDP socket struct can exist in three different, implicit
states: setup, bound and released. Setup is prior the socket has been
bound to a device. Bound is when the socket is active for receive and
send. Released is when the process/userspace side of the socket is
released, but the sock object is still lingering, e.g. when there is a
reference to the socket in an XSKMAP after process termination.

The Rx fast-path code uses the "dev" member of struct xdp_sock to
check whether a socket is bound or relased, and the Tx code uses the
struct xdp_umem "xsk_list" member in conjunction with "dev" to
determine the state of a socket.

However, the transition from bound to released did not tear the socket
down in correct order.

On the Rx side "dev" was cleared after synchronize_net() making the
synchronization useless. On the Tx side, the internal queues were
destroyed prior removing them from the "xsk_list".

This commit corrects the cleanup order, and by doing so
xdp_del_sk_umem() can be simplified and one synchronize_net() can be
removed.

Fixes: 965a99098443 ("xsk: add support for bind for Rx")
Fixes: ac98d8aab61b ("xsk: wire upp Tx zero-copy functions")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

iwlwifi: mvm: don't send keys when entering D3

[ Upstream commit 8c7fd6a365eb5b2647b2c01918730d0a485b9f85 ]

In the past, we needed to program the keys when entering D3. This was
since we replaced the image. However, now that there is a single
image, this is no longer needed.  Note that RSC is sent separately in
a new command.  This solves issues with newer devices that support PN
offload. Since driver re-sent the keys, the PN got zeroed and the
receiver dropped the next packets, until PN caught up again.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

ACPI / SBS: Fix rare oops when removing modules

[ Upstream commit 757c968c442397f1249bb775a7c8c03842e3e0c7 ]

There was a small race when removing the sbshc module where
smbus_alarm() had queued acpi_smbus_callback() for deferred execution
but it hadn't been run yet, so that when it did run hc had been freed
and the module unloaded, resulting in an invalid paging request.

A similar race existed when removing the sbs module with regards to
acpi_sbs_callback() (which is called from acpi_smbus_callback()).

We therefore need to ensure no callbacks are pending or executing before
the cleanups are done and the modules are removed.

Signed-off-by: Ronald Tschalär <ronald@innovation.ch>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

xfrm: use correct size to initialise sp->ovec

[ Upstream commit f1193e915748291fb205a908db33bd3debece6e2 ]

This place should want to initialize array, not a element,
so it should be sizeof(array) instead of sizeof(element)

but now this array only has one element, so no error in
this condition that XFRM_MAX_OFFLOAD_DEPTH is 1

Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxs-dcp - Fix AES issues

[ Upstream commit fadd7a6e616b89c7f4f7bfa7b824f290bab32c3c ]

The DCP driver does not obey cryptlen, when doing android CTS this
results in passing to hardware input stream lengths which are not
multiple of block size.

Add a check to prevent future erroneous stream lengths from reaching the
hardware and adjust the scatterlist walking code to obey cryptlen.

Also properly copy-out the IV for chaining.

Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

crypto: mxs-dcp - Fix SHA null hashes and output length

[ Upstream commit c709eebaf5c5faa8a0f140355f9cfe67e8f7afb1 ]

DCP writes at least 32 bytes in the output buffer instead of hash length
as documented. Add intermediate buffer to prevent write out of bounds.

When requested to produce null hashes DCP fails to produce valid output.
Add software workaround to bypass hardware and return valid output.

Signed-off-by: Radu Solea <radu.solea@nxp.com>
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: rcar-dmac: set scatter/gather max segment size

[ Upstream commit 97d49c59e219acac576e16293a6b8cb99302f62f ]

Fix warning when running with CONFIG_DMA_API_DEBUG_SG=y by allocating a
device_dma_parameters structure and filling in the max segment size.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

x86/olpc: Fix build error with CONFIG_MFD_CS5535=m

[ Upstream commit fa112cf1e8bc693d5a666b1c479a2859c8b6e0f1 ]

When building a 32-bit config which has the above MFD item as module
but OLPC_XO1_PM is enabled =y - which is bool, btw - the kernel fails
building with:

  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_remove':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:159: undefined reference to `mfd_cell_disable'
  ld: arch/x86/platform/olpc/olpc-xo1-pm.o: in function `xo1_pm_probe':
  /home/boris/kernel/linux/arch/x86/platform/olpc/olpc-xo1-pm.c:133: undefined reference to `mfd_cell_enable'
  make: *** [Makefile:1030: vmlinux] Error 1

Force MFD_CS5535 to y if OLPC_XO1_PM is enabled.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Lubomir Rintel <lkundrak@v3.sk>
Cc: x86@kernel.org
Link: http://lkml.kernel.org/r/20181005131750.GA5366@zn.tnic
Signed-off-by: Sasha Levin <sashal@kernel.org>

kexec: Allocate decrypted control pages for kdump if SME is enabled

[ Upstream commit 9cf38d5559e813cccdba8b44c82cc46ba48d0896 ]

When SME is enabled in the first kernel, it needs to allocate decrypted
pages for kdump because when the kdump kernel boots, these pages need to
be accessed decrypted in the initial boot stage, before SME is enabled.

 [ bp: clean up text. ]

Signed-off-by: Lianbo Jiang <lijiang@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: kexec@lists.infradead.org
Cc: tglx@linutronix.de
Cc: mingo@redhat.com
Cc: hpa@zytor.com
Cc: akpm@linux-foundation.org
Cc: dan.j.williams@intel.com
Cc: bhelgaas@google.com
Cc: baiyaowei@cmss.chinamobile.com
Cc: tiwai@suse.de
Cc: brijesh.singh@amd.com
Cc: dyoung@redhat.com
Cc: bhe@redhat.com
Cc: jroedel@suse.de
Link: https://lkml.kernel.org/r/20180930031033.22110-3-lijiang@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: qcom: q6v5: Fix a race condition on fatal crash

[ Upstream commit d3ae96c0e6b042a883927493351b2af6ee05e92c ]

Currently with GLINK_SSR enabled each fatal crash results in servicing
a crash from wdog as well. This is due to a race that occurs in setting
the running flag in the shutdown path. Fix this by moving the running
flag to the end of fatal interrupt handler.

Crash Logs:
qcom-q6v5-pil 4080000.remoteproc: fatal error without message
remoteproc remoteproc0: crash detected in 4080000.remoteproc: type fatal
error
remoteproc remoteproc0: handling crash #1 in 4080000.remoteproc
remoteproc remoteproc0: recovering 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: watchdog without message
remoteproc remoteproc0: crash detected in 4080000.remoteproc: type watchdog
remoteproc:glink-edge: intent request timed out
qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: failed to send
cleanup message
qcom_glink_ssr remoteproc:glink-edge.glink_ssr.-1.-1: timeout waiting
for cleanup done message
qcom-q6v5-pil 4080000.remoteproc: timed out on wait
qcom-q6v5-pil 4080000.remoteproc: port failed halt
remoteproc remoteproc0: stopped remote processor 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss
remoteproc remoteproc0: remote processor 4080000.remoteproc is now up
remoteproc remoteproc0: handling crash #2 in 4080000.remoteproc
remoteproc remoteproc0: recovering 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: port failed halt
remoteproc remoteproc0: stopped remote processor 4080000.remoteproc
qcom-q6v5-pil 4080000.remoteproc: MBA booted, loading mpss
remoteproc remoteproc0: remote processor 4080000.remoteproc is now up

Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

remoteproc: Check for NULL firmwares in sysfs interface

[ Upstream commit faeadbb64094757150a8c2a3175ca418dbdd472c ]

The remoteproc framework provides a sysfs file 'firmware'
for modifying the firmware image name from userspace. Add
an additional check to ensure NULL firmwares are errored
out right away, rather than getting a delayed error while
requesting a firmware during the start of a remoteproc
later on.

Tested-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

tc-testing: fix build of eBPF programs

[ Upstream commit cf5eafbfa586d030f9321cee516b91d089e38280 ]

rely on uAPI headers in the current kernel tree, rather than requiring the
correct version installed on the test system. While at it, group all
sections in a single binary and test the 'section' parameter.

Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

net: hns3: Fix for rx vlan id handle to support Rev 0x21 hardware

[ Upstream commit 701a6d6ac78c76083ddb7c6581fdbedd95093e11 ]

In revision 0x20, we use vlan id != 0 to check whether a vlan tag
has been offloaded, so vlan id 0 is not supported.

In revision 0x21, rx buffer descriptor adds two bits to indicate
whether one or more vlan tags have been offloaded, so vlan id 0
is valid now.

This patch seperates the handle for vlan id 0, add vlan id 0 support
for revision 0x21.

Fixes: 5b5455a9ed5a ("net: hns3: Add STRP_TAGP field support for hardware revision 0x21")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

soc: fsl: bman_portals: defer probe after bman's probe

[ Upstream commit e0940b34c40e95d1879691d2474d182c57aae0de ]

A crash in bman portal probing could not be triggered (as is the case
with qman portals) but it does make calls [1] into the bman driver so
lets make sure the bman portal probing happens after bman's.

[1]  bman_p_irqsource_add() (in bman) called by:
       init_pcfg() called by:
         bman_portal_probe()

Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: silead - try firmware reload after unsuccessful resume

[ Upstream commit dde27443211062e841806feaf690674b7c3a599f ]

A certain silead controller (Chip ID: 0x56810000) loses its firmware
after suspend, causing the resume to fail. This patch tries to load
the firmware, should a resume error occur and retries the resuming.

Signed-off-by: Julian Sax <jsbc@gmx.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Input: st1232 - set INPUT_PROP_DIRECT property

[ Upstream commit 20bbb312079494a406c10c90932e3c80837c9d94 ]

This is how userspace checks for touchscreen devices most reliably.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: zx2967: use core to detect 'no zero length' quirk

[ Upstream commit e2115ace4196bcd2126446fb874bcfc90cba79be ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: tegra: use core to detect 'no zero length' quirk

[ Upstream commit c96c0f2683804b710531e7b754dcd02b5ded6d4a ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: qup: use core to detect 'no zero length' quirk

[ Upstream commit de82bb431855580ad659bfed3e858bd9dd12efd0 ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: omap: use core to detect 'no zero length' quirk

[ Upstream commit f37b2bb6ac3e6ebf855d9d4f05cc6932a8e5b463 ]

And don't reimplement in the driver.

Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

gfs2: slow the deluge of io error messages

[ Upstream commit b524abcc01483b2ac093cc6a8a2a7375558d2b64 ]

When an io error is hit, it calls gfs2_io_error_bh_i for every
journal buffer it can't write. Since we changed gfs2_io_error_bh_i
recently to withdraw later in the cycle, it sends a flood of
errors to the console. This patch checks for the file system already
being withdrawn, and if so, doesn't send more messages. It doesn't
stop the flood of messages, but it slows it down and keeps it more
reasonable.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: cec-gpio: select correct Signal Free Time

[ Upstream commit c439d5c1e13dbf66cff53455432f21d4d0536c51 ]

If a receive is in progress or starts before the transmit has
a chance, then lower the Signal Free Time of the upcoming transmit
to no more than CEC_SIGNAL_FREE_TIME_NEW_INITIATOR.

This is per the specification requirements.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

media: ov5640: fix framerate update

[ Upstream commit 0929983e49c81c1d413702cd9b83bb06c4a2555c ]

Changing framerate right before streamon had no effect,
the new framerate value was taken into account only at
next streamon, fix this.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

dmaengine: ioat: fix prototype of ioat_enumerate_channels

[ Upstream commit f4d34aa8c887a8a2d23ef546da0efa10e3f77241 ]

Signed-off-by: Rami Rosen <ramirose@gmail.com>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

NFSv4.x: fix lock recovery during delegation recall

[ Upstream commit 44f411c353bf6d98d5a34f8f1b8605d43b2e50b8 ]

Running "./nfstest_delegation --runtest recall26" uncovers that
client doesn't recover the lock when we have an appending open,
where the initial open got a write delegation.

Instead of checking for the passed in open context against
the file lock's open context. Check that the state is the same.

Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

printk: Correct wrong casting

[ Upstream commit 51a72ab7372d85c96104e58036f1b49ba11e5d2b ]

log_first_seq and console_seq are 64-bit unsigned integers.
Correct a wrong casting that might cut off the output.

Link: http://lkml.kernel.org/r/1538239553-81805-2-git-send-email-zhe.he@windriver.com
Cc: rostedt@goodmis.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: He Zhe <zhe.he@windriver.com>
[sergey.senozhatsky@gmail.com: More descriptive commit message]
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

i2c: brcmstb: Allow enabling the driver on DSL SoCs

[ Upstream commit e1eba2ea54a2de0e4c58d87270d25706bb77b844 ]

ARCH_BCM_63XX which is used by ARM-based DSL SoCs from Broadcom uses the
same controller, make it possible to select the STB driver and update
the Kconfig and help text a bit.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: Use clk_hw API for calling clk framework from clk notifiers

[ Upstream commit 1da220e3a5d22fccda0bc8542997abc1d1741268 ]

clk_notifier_register() documentation states, that the provided notifier
callbacks associated with the notifier must not re-enter into the clk
framework by calling any top-level clk APIs. Fix this by replacing
clk_get_rate() calls with clk_hw_get_rate(), which is safe in this
context.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: exynos5420: Define CLK_SECKEY gate clock only or Exynos5420

[ Upstream commit d32dd2a1a0f80edad158c9a1ba5f47650d9504a0 ]

The bit of GATE_BUS_PERIS1 for CLK_SECKEY is just reserved on
exynos5422/5800, not exynos5420. Define gate clk for exynos5420 to
handle the bit only on exynos5420.

Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
[m.szyprow: rewrote commit subject]
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

clk: samsung: Use NOIRQ stage for Exynos5433 clocks suspend/resume

[ Upstream commit 70da9ee80228e6d98fd68e3c1db124c4461d283c ]

SoC clock drivers should suspend after every other drivers in the system,
which are using clocks and resume before them. The last stage for calling
suspend device callbacks is NOIRQ stage and there exists driver, which use
that state (dwmmc-exynos), so Exynos5433 clocks driver should also use it.
During the same stage, clocks driver will be always suspended after its
clients as a direct result of proper device probe order (deferred probe
reorders the suspend call sequence).

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <snawrocki@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qtnfmac: drop error reports for out-of-bounds key indexes

[ Upstream commit 35da3fe63b8647ce3cc52fccdf186a60710815fb ]

On disconnect wireless core attempts to remove all the supported keys.
Following cfg80211_ops conventions, firmware returns -ENOENT code
for the out-of-bound key indexes. This is a normal behavior,
so no need to report errors for this case.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

qtnfmac: inform wireless core about supported extended capabilities

[ Upstream commit ab1c64a1d349cc7f1090a60ce85a53298e3d371d ]

Driver retrieves information about supported extended capabilities
from wireless card. However this information is not propagated
further to Linux wireless core. Fix this by setting extended
capabilities fields of wiphy structure.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>