drm/amdgpu: use dma_resv_for_each_fence for CS workaround v2

Get the write fence using dma_resv_for_each_fence instead of accessing
it manually.

v2: add TODO comment

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-9-christian.koenig@amd.com

drm/radeon: stop using dma_resv_excl_fence

Instead use the new dma_resv_get_singleton function.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-8-christian.koenig@amd.com

drm/vmwgfx: stop using dma_resv_excl_fence v2

Instead use the new dma_resv_get_singleton function.

v2: drop the TODO comment.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-7-christian.koenig@amd.com

dma-buf: add dma_resv_get_singleton v2

Add a function to simplify getting a single fence for all the fences in
the dma_resv object.

v2: fix ref leak in error handling

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-3-christian.koenig@amd.com

drivers/dma-buf: dma-buf.c: fix a typo

Signed-off-by: Sui Jingfeng <15330273260@189.cn>
Link: https://patchwork.freedesktop.org/patch/msgid/20220402134413.1705246-1-15330273260@189.cn
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>

drm/ttm: Add a parameter to add extra pages into ttm_tt

Add a parameter called "extra_pages" for ttm_tt_init, to indicate that
driver needs extra pages in ttm_tt.

v2:
  Used imperative wording [Thomas and Christian]

Signed-off-by: Ramalingam C <ramalingam.c@intel.com>
cc: Christian Koenig <christian.koenig@amd.com>
cc: Hellstrom Thomas <thomas.hellstrom@intel.com>
Reviewed-by: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian Konig <christian.koenig@amd.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220401123751.27771-8-ramalingam.c@intel.com

drm/edid: reduce magic when updating the EDID block checksum

The code modifying the EDID block should not need to do tricks to fix
the checksum. We have a function for computing the checksum, use it.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5a11435419d804a58ef356c0b9acf445cffc1354.1648752228.git.jani.nikula@intel.com

drm/edid: track invalid blocks in drm_do_get_edid()

Track invalid blocks instead of valid extensions to minimize impact on
the happy day scenario, and hide the details in the separate function.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6215f85b01c579a44c66129d2b5f41e1ab9294de.1648752228.git.jani.nikula@intel.com

drm/edid: split out invalid block filtering to a separate function

It's such a special case there's no point in keeping it inline in the
happy day scenario, confusing matters.

v2: Rebase on the invalid block filtering fix

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ea8ccd654b5beca6ccf99666754aea09c836b6a5.1648752228.git.jani.nikula@intel.com

drm/edid: simplify block check when filtering invalid blocks

There's no need to handle complicated scenarios or debug log when
filtering blocks that have already been identified as invalid. Simplify
by adding an edid_block_valid() helper that operates on const data and
prints nothing.

(Finally, here's the justification for the previously added separate
edid_block_status_valid() function!)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/aa25131c3454c7dbc1e8fdb46549f3787bdf6354.1648752228.git.jani.nikula@intel.com

drm/edid: use a better variable name for EDID block read retries

Just i is a bit terse, clarify what it's about.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9c95c01445f5735332cbbd9eae6cd078e152050f.1648752228.git.jani.nikula@intel.com

drm/edid: split drm_edid_block_valid() to check and act parts

Add edid_block_check() that only checks the EDID block validity, without
any actions. Turns out it's simple and crystal clear.

Rewrite drm_edid_block_valid() around it, keeping all the functionality
fairly closely the same, warts and all. Turns out it's incredibly
complicated for a function you'd expect to be simple, with all the
fixing and printing and special casing. (Maybe we'll want to simplify it
in the future.)

To slightly simplify, drop the warning for EDID minor revisions > 4.

v2:
- Fix edid_fixup clamp (Ville)
- s/base/is_base_block/ (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b7d108b69acccb7dccbdecc0ca06c2b3ca2e33ca.1648752228.git.jani.nikula@intel.com

drm/edid: split out edid_header_fix()

Give a name to the EDID header fixup instead of having an inline memcpy.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c10c24b179e942548cd5d693d159bb0d12be4d26.1648752228.git.jani.nikula@intel.com

drm/edid: clean up edid_is_zero()

Simplify, rename, take void pointer. No need for the drm_ prefix for
internal helpers.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/15220580f07b63c92a3e448347cf59b297990407.1648752228.git.jani.nikula@intel.com

drm/edid: make drm_edid_header_is_valid() accept void pointer

It will be useful to accept a struct edid *, but for compatibility with
existing usage accept void *.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/33fbe1615a3bd82112eaf4077bbb521793cbb91a.1648752228.git.jani.nikula@intel.com

drm/edid: add edid_block_tag() helper to get the EDID extension tag

The extension tag at offset 0 is not present in struct edid, add a
helper for it to reduce the need to use u8 *.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3f27c67db63c186a48e83fdee2d1ac8a17714e78.1648752228.git.jani.nikula@intel.com

drm/edid: clean up EDID block checksum functions

Have two clear functions, one to compute the checksum over the EDID, and
another to get the checksum from the EDID. Throw away the diff function.

Ditch the drm_ prefix for static functions, and accept const void * to
help transition to struct edid * usage.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/36641401c8eb0e403c0e33365ff4ad9a28f9fd4a.1648752228.git.jani.nikula@intel.com

drm/edid: use struct edid * in drm_do_get_edid()

Mixing u8 * and struct edid * is confusing, switch to the latter.

v2:
- Rebase on the invalid block filtering fix
- Rename struct edid *base to *dest_block for clarity (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18bf820c1d20e616076b3275627e7ebf01bce7a3.1648752228.git.jani.nikula@intel.com

dma-buf: drop the DAG approach for the dma_resv object v3

So far we had the approach of using a directed acyclic
graph with the dma_resv obj.

This turned out to have many downsides, especially it means
that every single driver and user of this interface needs
to be aware of this restriction when adding fences. If the
rules for the DAG are not followed then we end up with
potential hard to debug memory corruption, information
leaks or even elephant big security holes because we allow
userspace to access freed up memory.

Since we already took a step back from that by always
looking at all fences we now go a step further and stop
dropping the shared fences when a new exclusive one is
added.

v2: Drop some now superflous documentation
v3: Add some more documentation for the new handling.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321135856.1331-11-christian.koenig@amd.com

drm: bridge: mcde_dsi: Switch to devm_drm_of_get_bridge

devm_drm_of_get_bridge is capable of looking up the downstream
bridge and panel and trying to add a panel bridge if the panel
is found.

Replace explicit finding calls with devm_drm_of_get_bridge.

Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-5-jagan@amarulasolutions.com

drm: bridge: dw-mipi-dsi: Switch to devm_drm_of_get_bridge

devm_drm_of_get_bridge is capable of looking up the downstream
bridge and panel and trying to add a panel bridge if the panel
is found.

Replace explicit finding calls with devm_drm_of_get_bridge.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-4-jagan@amarulasolutions.com

drm: bridge: mtk_dsi: Switch to devm_drm_of_get_bridge

devm_drm_of_get_bridge is capable of looking up the downstream
bridge and panel and trying to add a panel bridge if the panel
is found.

Replace explicit finding calls with devm_drm_of_get_bridge.

Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-3-jagan@amarulasolutions.com

drm: bridge: nwl-dsi: Switch to devm_drm_of_get_bridge

devm_drm_of_get_bridge is capable of looking up the downstream
bridge and panel and trying to add a panel bridge if the panel
is found.

Replace explicit finding calls with devm_drm_of_get_bridge.

Reviewed-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-2-jagan@amarulasolutions.com

Revert "drm/bridge: dw-mipi-dsi: Find the possible DSI devices"

This reverts commit c206c7faeb3263a7cc7b4de443a3877cd7a5e74b.

In order to avoid any probe ordering issues, the I2C based downstream
bridge drivers now register and attach the DSI devices at the probe
instead of doing it on drm_bridge_function.attach().

Examples of those commits are:

commit <6ef7ee48765f> ("drm/bridge: sn65dsi83: Register and attach our
DSI device at probe")
commit <d89078c37b10> ("drm/bridge: lt8912b: Register and attach our DSI
device at probe")
commit <864c49a31d6b> ("drm/bridge: adv7511: Register and attach our DSI
device at probe")

dw-mipi-dsi has panel or bridge finding code based on previous downstream
bridges, so revert the same and make the panel or bridge funding in host
attach as before.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331154503.66054-1-jagan@amarulasolutions.com

drm/bridge: lt9611: Add atomic_get_input_bus_fmts

Implement .atomic_get_input_bus_fmts callback, which sets up
the input (scanout-engine-end) formats, so that those formats
can then be used in pipeline format negotiation between this
bridge and the scanout engine.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-2-marex@denx.de

drm/bridge: lt9611: Switch to atomic operations

Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dave Airlie <airlied@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331153923.14314-1-marex@denx.de

drm/bridge: ti-sn65dsi83: Check link status register after enabling the bridge

In rare cases, the bridge may not start up correctly, which usually
leads to no display output. In case this happens, warn about it in
the kernel log.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220213022648.495895-1-marex@denx.de

drm: bridge: icn6211: Read and validate chip IDs before configuration

Read out the Vendor/Chip/Version ID registers from the chip before
performing any configuration, and validate that the registers have
correct values. This is mostly a simple test whether DSI register
access does work, since that tends to be broken on various bridges.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-12-marex@denx.de

drm: bridge: icn6211: Rework ICN6211_DSI to chipone_writeb()

Rename and inline macro ICN6211_DSI() into function chipone_writeb()
to keep all function names lower-case. No functional change.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-11-marex@denx.de

drm: bridge: icn6211: Add I2C configuration support

The ICN6211 chip starts in I2C configuration mode after cold boot.
Implement support for configuring the chip via I2C in addition to
the current DSI LP command mode configuration support. The later
seems to be available only on chips which have additional MCU on
the panel/bridge board which preconfigures the ICN6211, while the
I2C configuration mode added by this patch does not require any
such MCU.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-10-marex@denx.de

drm: bridge: icn6211: Implement atomic_get_input_bus_fmts

Implement .atomic_get_input_bus_fmts callback, which sets up the
input (DSI-end) format, and that format can then be used in pipeline
format negotiation between the DSI-end of this bridge and the other
component closer to the scanout engine.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-9-marex@denx.de

drm: bridge: icn6211: Set SYS_CTRL_1 to value used in examples

Both example code [1], [2] as well as one provided by custom panel vendor
set register SYS_CTRL_1 to 0x88. What exactly does the value mean is unknown
due to unavailable datasheet. Align this register value with example code.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-8-marex@denx.de

drm: bridge: icn6211: Disable DPI color swap

The chip is capable of swapping DPI RGB channels. The driver currently
does not implement support for this functionality. Write the MIPI_PN_SWAP
register to 0 to assure the color swap is disabled.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-7-marex@denx.de

drm: bridge: icn6211: Use DSI burst mode without EoT and with LP command mode

The DSI burst mode is more energy efficient than the DSI sync pulse mode,
make use of the burst mode since the chip supports it as well. Disable the
generation of EoT packet, the chip ignores it, so no point in emitting it.
Enable transmission of data in LP mode, otherwise register read via DSI
does not work with this chip.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-6-marex@denx.de

drm: bridge: icn6211: Add generic DSI-to-DPI PLL configuration

The chip contains fractional PLL, however the driver currently hard-codes
one specific PLL setting. Implement generic PLL parameter calculation code,
so any DPI panel with arbitrary pixel clock can be attached to this bridge.

The datasheet for this bridge is not available, the PLL behavior has been
inferred from [1] and [2] and by analyzing the DPI pixel clock with scope.
The PLL limits might be wrong, but at least the calculated values match all
the example code available. This is better than one hard-coded pixel clock
value anyway.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-5-marex@denx.de

drm: bridge: icn6211: Add HS/VS/DE polarity handling

The driver currently hard-codes HS/VS polarity to active-low and DE to
active-high, which is not correct for a lot of supported DPI panels.
Add the missing mode flag handling for HS/VS/DE polarity.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-4-marex@denx.de

drm: bridge: icn6211: Fix HFP_HSW_HBP_HI and HFP_MIN handling

The HFP_HSW_HBP_HI register must be programmed with 2 LSbits of each
Horizontal Front Porch/Sync/Back Porch. Currently the driver programs
this register to 0, which breaks displays with either value above 255.

The HFP_MIN register must be set to the same value as HFP_LI, otherwise
there is visible image distortion, usually in the form of missing lines
at the bottom of the panel.

Fix this by correctly programming the HFP_HSW_HBP_HI and HFP_MIN registers.

Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes: ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-3-marex@denx.de

drm: bridge: icn6211: Fix register layout

The chip register layout has nothing to do with MIPI DCS, the registers
incorrectly marked as MIPI DCS in the driver are regular chip registers
often with completely different function.

Fill in the actual register names and bits from [1] and [2] and add the
entire register layout, since the documentation for this chip is hard to
come by.

[1] https://github.com/rockchip-linux/kernel/blob/develop-4.19/drivers/gpu/drm/bridge/icn6211.c
[2] https://github.com/tdjastrzebski/ICN6211-Configurator

Acked-by: Maxime Ripard <maxime@cerno.tech>
Fixes: ce517f18944e3 ("drm: bridge: Add Chipone ICN6211 MIPI-DSI to RGB bridge")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220331150509.9838-2-marex@denx.de

drm: exynos: dsi: Switch to atomic funcs

The new support drm bridges are moving towards atomic functions.

Replace atomic version of functions to continue the transition
to the atomic API.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-7-jagan@amarulasolutions.com

drm: exynos: dsi: Convert to bridge driver

Convert the encoders to bridge drivers in order to standardize on
a single API with built-in dumb encoder support for compatibility
with existing component drivers.

Driver bridge conversion will help to reuse the same bridge on
different platforms as exynos dsi driver can be used as a Samsung
DSIM and use it for i.MX8MM platform.

Bridge conversion,

- Drops drm_encoder_helper_funcs.

- Adds drm_bridge_funcs and register a drm bridge.

- Drops bridge_chain.

- Separate pre_enable from enable function.

- Separate post_disable from disable function.

Convert it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-6-jagan@amarulasolutions.com

drm: exynos: dsi: Use drm panel_bridge API

Replace the manual panel handling code by a drm panel_bridge via
devm_drm_of_get_bridge().

Adding panel_bridge handling,

- Drops drm_connector and related operations as drm_bridge_attach
  creates connector during attachment.

- Drops panel pointer and iterate the bridge, so-that it can operate
  the normal bridge and panel_bridge in constitutive callbacks.

This simplifies the driver and allows all components in the display
pipeline to be treated as bridges.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-5-jagan@amarulasolutions.com

exynos: drm: dsi: Attach in_bridge in MIC driver

MIC drivers in the Exynos5433 display pipeline are already registered
as bridge drivers and it is more advisable to attach the downstream
bridge on the bridge attach call instead of doing the same in the
DSI driver.

This makes bridge attachment more meaningful and avoids the races
during bridge function calls.

So, move the bridge finding and drm_bridge_attach from DSI to MIC.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-4-jagan@amarulasolutions.com

drm: bridge: panel: Reset the connector state pointer

Trigger hotplug event with drm_kms_helper_hotplug_event might fail if the
connector state pointer is NULL.

BUG observed in exynos dsi driver where drm_bridge_attach is trying to
register a connector in panel_bridge before the hotplug event is triggered.

WARNING: CPU: 1 PID: 1 at drivers/gpu/drm/drm_atomic_state_helper.c:494 drm_atomic_helper_connector_duplicate_state+0x94/0x9c
Modules linked in:
CPU: 1 PID: 1 Comm: swapper/0 Tainted: G W 5.16.0-rc1-00009-g704b1dbfa4c2 #11058
Hardware name: Samsung Exynos (Flattened Device Tree)
[<c0110b30>] (unwind_backtrace) from [<c010c618>] (show_stack+0x10/0x14)
[<c010c618>] (show_stack) from [<c0b657d4>] (dump_stack_lvl+0x58/0x70)
[<c0b657d4>] (dump_stack_lvl) from [<c01261dc>] (__warn+0xd0/0x134)
[<c01261dc>] (__warn) from [<c0b5f628>] (warn_slowpath_fmt+0x5c/0xb4)
[<c0b5f628>] (warn_slowpath_fmt) from [<c064bce4>] (drm_atomic_helper_connector_duplicate_state+0x94/0x9c)
[<c064bce4>] (drm_atomic_helper_connector_duplicate_state) from [<c0666b64>] (drm_atomic_get_connector_state+0xd4/0x190)
[<c0666b64>] (drm_atomic_get_connector_state) from [<c0667928>] (__drm_atomic_helper_set_config+0x314/0x368)
[<c0667928>] (__drm_atomic_helper_set_config) from [<c067e628>] (drm_client_modeset_commit_atomic+0x170/0x278)
[<c067e628>] (drm_client_modeset_commit_atomic) from [<c067e800>] (drm_client_modeset_commit_locked+0x60/0x1c8)
[<c067e800>] (drm_client_modeset_commit_locked) from [<c067e98c>] (drm_client_modeset_commit+0x24/0x40)
[<c067e98c>] (drm_client_modeset_commit) from [<c06509c0>] (drm_fb_helper_set_par+0xb8/0xf8)
[<c06509c0>] (drm_fb_helper_set_par) from [<c05b86d0>] (fbcon_init+0x2c0/0x518)
[<c05b86d0>] (fbcon_init) from [<c060636c>] (visual_init+0xc0/0x108)
[<c060636c>] (visual_init) from [<c06085e4>] (do_bind_con_driver+0x1b8/0x3a4)
[<c06085e4>] (do_bind_con_driver) from [<c0608b40>] (do_take_over_console+0x13c/0x1e8)
[<c0608b40>] (do_take_over_console) from [<c05b6854>] (do_fbcon_takeover+0x78/0xd8)
[<c05b6854>] (do_fbcon_takeover) from [<c05b1154>] (register_framebuffer+0x208/0x2e0)
[<c05b1154>] (register_framebuffer) from [<c064ead0>] (__drm_fb_helper_initial_config_and_unlock+0x400/0x63c)
[<c064ead0>] (__drm_fb_helper_initial_config_and_unlock) from [<c063a718>] (drm_kms_helper_hotplug_event+0x24/0x30)
[<c063a718>] (drm_kms_helper_hotplug_event) from [<c068f668>] (exynos_dsi_host_attach+0x174/0x1fc)
[<c068f668>] (exynos_dsi_host_attach) from [<c0699354>] (s6e8aa0_probe+0x1b4/0x218)

So reset the atomic state for a given connector by freeing the state pointer
and allocate a new empty state object. This can be done using connector
funcs->reset helper and has to be done before the hotplug even calls.

This patch calls the connector->funcs->reset in panel_bridge_attach.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-3-jagan@amarulasolutions.com

drm: bridge: tc358764: Use drm panel_bridge API

Replace the manual panel handling code by a drm panel_bridge via
devm_drm_of_get_bridge().

Adding panel_bridge handling,

- Drops drm_connector and related operations as drm_bridge_attach
  creates connector during attachment.

- Drops panel pointer and panel healpers.

This simplifies the driver and allows all components in the display
pipeline to be treated as bridges.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220303163654.3381470-2-jagan@amarulasolutions.com

drm/bridge: tc358767: Add DSI-to-DPI mode support

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Add support for the
DSI-to-DPI mode.

This requires skipping most of the (e)DP initialization code, which is
currently a large part of this driver, hence it is better to have far
simpler separate tc_dpi_bridge_funcs and their implementation.

The configuration of DPI output is also much simpler. The configuration
of the DSI input is rather similar to the other TC bridge chips.

The Pixel PLL in DPI output mode does not have the 65..150 MHz limitation
imposed on the (e)DP output mode, so this limitation is skipped to permit
operating panels with far slower pixel clock, even below 9 MHz. This mode
of operation of the PLL is valid and tested.

The detection of bridge mode is now added into tc_probe_bridge_mode(),
where in case a DPI panel is found on port@1 endpoint@1, the mode is
assumed to be DSI-to-DPI. If (e)DP is detected on port@2, the mode is
assumed to be DPI-to-(e)DP.

The DSI-to-(e)DP mode is not supported due to lack of proper hardware,
but this would be some sort of mix between the two aforementioned modes.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-12-marex@denx.de

drm/bridge: tc358767: Split tc_set_video_mode() into common and (e)DP part

The tc_set_video_mode() sets up both common and (e)DP video mode settings of
the bridge chip. Split the function into tc_set_common_video_mode() to set
the common settings and tc_set_edp_video_mode() to set the (e)DP specific
settings. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-11-marex@denx.de

drm/bridge: tc358767: Detect bridge mode from connected endpoints in DT

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. It is possible to find out the mode in which the
bridge should be operated by testing connected endpoints in DT.

Port allocation:
port@0 - DSI input
port@1 - DPI input/output
port@2 - eDP output

Possible connections:
DPI -> port@1 -> port@2 -> eDP :: [port@0 is not connected]
DSI -> port@0 -> port@2 -> eDP :: [port@1 is not connected]
DSI -> port@0 -> port@1 -> DPI :: [port@2 is not connected]

Add function to determine the bridge mode based on connected endpoints.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-10-marex@denx.de

drm/bridge: tc358767: Move bridge ops setup into tc_probe_edp_bridge_endpoint()

The bridge ops are specific to the bridge configuration, move them
into tc_probe_edp_bridge_endpoint() to permit cleaner addition of
DSI-to-DPI mode. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-9-marex@denx.de

drm/bridge: tc358767: Wrap (e)DP aux I2C registration into tc_aux_link_setup()

This bit of code is (e)DP and aux I2C link specific, move it into
tc_aux_link_setup() to permit cleaner addition of DSI-to-DPI mode.
No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-8-marex@denx.de

drm/bridge: tc358767: Move (e)DP bridge endpoint parsing into dedicated function

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is
currently supported. In order to support the rest of the modes without
making the tc_probe() overly long, split the bridge endpoint parsing
into dedicated function, where the necessary logic to detect the bridge
mode based on which endpoints are connected, can be implemented.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-7-marex@denx.de

drm/bridge: tc358767: Implement atomic_check callback

Implement .atomic_check callback which prevents user space from setting
unsupported mode. The tc_edp_common_atomic_check() variant is already
prepared for DSI-to-DPI mode addition, which has different frequency
limits.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-6-marex@denx.de

drm/bridge: tc358767: Convert to atomic ops

Use the atomic version of the enable/disable operations to continue the
transition to the atomic API. This will be needed to access the mode
from the atomic state.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-5-marex@denx.de

drm/bridge: tc358767: Change tc_ prefix to tc_edp_ for (e)DP specific functions

These functions are specific to (e)DP output initialization and
operation, add specific tc_edp_ prefix to those functions to
discern them from DPI output functions that will be added later
in this series. No functional change.

Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-4-marex@denx.de

dt-bindings: display: bridge: tc358867: Document DSI data-lanes property

It is necessary to specify the number of connected/used DSI data lanes when
using the DSI input port of this bridge. Document the 'data-lanes' property
of the DSI input port.

Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-3-marex@denx.de

dt-bindings: display: bridge: tc358867: Document DPI output support

The TC358767/TC358867/TC9595 are all capable of operating in multiple
modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Document support for the
DPI output port, which can now be connected both as input and output.

Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Tested-by: Lucas Stach <l.stach@pengutronix.de> # In both DPI to eDP and DSI to DPI mode.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220329085015.39159-2-marex@denx.de

drm/bridge: adv7511: clean up CEC adapter when probe fails

When the probe routine fails we also need to clean up the
CEC adapter registered in adv7511_cec_init().

Fixes: 3b1b975003e4 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321104705.2804423-1-l.stach@pengutronix.de

drm/bridge: anx7625: add missing destroy_workqueue() in anx7625_i2c_probe()

Add the missing destroy_workqueue() before return from
anx7625_i2c_probe() in the error handling case.

Fixes: adca62ec370c ("drm/bridge: anx7625: Support reading edid through aux channel")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220326073326.3389347-1-yangyingliang@huawei.com

drm/edid: fix invalid EDID extension block filtering

The invalid EDID block filtering uses the number of valid EDID
extensions instead of all EDID extensions for looping the extensions in
the copy. This is fine, by coincidence, if all the invalid blocks are at
the end of the EDID. However, it's completely broken if there are
invalid extensions in the middle; the invalid blocks are included and
valid blocks are excluded.

Fix it by modifying the base block after, not before, the copy.

Fixes: 14544d0937bf ("drm/edid: Only print the bad edid when aborting")
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330170426.349248-1-jani.nikula@intel.com

drm/vc4: Implement atomic_print_state for HVS channel state

The HVS state configuration is useful when debugging what's going on in
the vc4 hardware pipeline. Add an implementation of .atomic_print_state.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-5-maxime@cerno.tech

drm/vc4: Constify private state accessors

None of those helpers modify the pointed data, let's make them const.

Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-4-maxime@cerno.tech

drm/atomic: Add atomic_print_state to private objects

A number of drivers (amdgpu, komeda, vc4, etc.) leverage the
drm_private_state structure, but we don't have any infrastructure to
provide debugging like we do for the other components state. Let's add
an atomic_print_state hook to be consistent.

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220328124304.2309418-3-maxime@cerno.tech

drm/atomic: Print the state every non-blocking commit

The DRM_UT_STATE controls whether we're calling
drm_atomic_print_new_state() whenever a new state is committed. However,
that call is made in the drm_mode_atomic_ioctl(), whereas we have
multiple users of the drm_atomic_commit() function in the kernel
(framebuffer emulation, drm_atomic_helper_dirtyfb, etc.).

This leads to multiple states being committed but never actually
displayed even though we asked to have verbose atomic state debugging.

Let's move the call to drm_atomic_print_new_state() to
drm_atomic_commit() to make sure we don't miss any. Non-blocking commits
were never logged though, and it would create too much churn in the logs
to do so, so leave them out for now.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://lore.kernel.org/r/20220328124304.2309418-2-maxime@cerno.tech

drm/panel-edp: Fix AUO B133UAN01 panel id

Two digits are swapped in the AUO B133UAN01 panel id (0x8495 instead
of 0x8594). This went initially unnoticed because the panel is still
detected, though it is set up with a conservative default timing. Fix
the digit swap.

Fixes: ec57376fba5a ("drm/panel-edp: Add AUO B133UAN01")
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220330090435.1.Id1522250dd07a6b574c1cc7826023fc6acd141b4@changeid

drm/panel-edp: Add AUO B133UAN01

Add support for the AUO B133UAN01 13.3" WUXGA panel.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324134819.v2.1.I816014b6c62da5a33af5021f3cc35cea66552c00@changeid

drm/edid: split drm_add_edid_modes() to two

Reduce the size of the function that actually modifies the EDID.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/437c3c79f68d1144444fb2dd18a678f3aa97272c.1648477901.git.jani.nikula@intel.com

drm/edid: add more general struct edid constness in the interfaces

With this, the remaining non-const parts are the ones that actually
modify the EDID, for example to fix corrupt EDID.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c7156f22494b585c55a00a6732462bde0cc19dbf.1648477901.git.jani.nikula@intel.com

drm/edid: constify struct edid passed around in callbacks and closure

Finalize detailed timing parsing constness by making struct edid also
const in callbacks and closure.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8229be49b5a7686856c17428aa9291b4c4cf1bd5.1648477901.git.jani.nikula@intel.com

drm/edid: constify struct edid passed to detailed blocks

Constify the first level of struct edid in detailed timing parsing. Also
switch to struct edid instead of u8.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec7acb8a9ee0e2868bbb2afdfdd7db114ae180e1.1648477901.git.jani.nikula@intel.com

drm/edid: constify struct detailed_timing in parsing callbacks

Moving one level higher, constify struct detailed_timing pointers in
callbacks.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9b617068d2349a574a837ad6207b1d45c4d79eb5.1648477901.git.jani.nikula@intel.com

drm/edid: constify struct detailed_timing in lower level parsing

Start constifying the struct detailed_timing pointers being passed
around from bottom up.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b7fafcc7784db0003e454544916c273a9eb1250.1648477901.git.jani.nikula@intel.com

drm/edid: use struct detailed_timing member access in gtf2 functions

Use struct detailed_timing member access instead of direct offsets to
avoid casting.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9fe5f5c39039e585fecfffb390297d49262e5fd3.1648477901.git.jani.nikula@intel.com

drm/edid: use struct detailed_timing member access in is_rb()

Use struct detailed_timing member access instead of direct offsets to
avoid casting.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c069669c2fe8f9c3061c7d1a413c75a33ec48813.1648477901.git.jani.nikula@intel.com

drm/edid: pass a timing pointer to is_detailed_timing_descriptor()

Use struct member access instead of direct offsets to avoid a cast.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b5213383e14f11c6a505b10a7342fb2ff4f2a11.1648477901.git.jani.nikula@intel.com

drm/edid: pass a timing pointer to is_display_descriptor()

Use struct member access instead of direct offsets to avoid lots of
casts all over the place.

Use BUILD_BUG_ON() for sanity check.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ccc54b45ea628874c0290dd64114da6cefff1819.1648477901.git.jani.nikula@intel.com

drm/edid: fix reduced blanking support check

The reduced blanking bit is valid only for CVT, indicated by display
range limits flags 0x04.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5dea5ee24065450716bbc177dd6850d3193dbeec.1648477901.git.jani.nikula@intel.com

drm/edid: don't modify EDID while parsing

We'll want to keep the EDID immutable while parsing. Stop modifying the
EDID because of the quirks.

In theory, this does have userspace implications, but the userspace is
supposed to use the modes exposed via KMS API, not by parsing the EDID
directly.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/45d5cf067eaad49b321ac82836090d9de524374e.1648477901.git.jani.nikula@intel.com

tilcdc: tilcdc_external: fix an incorrect NULL check on list iterator

The bug is here:
if (!encoder) {

The list iterator value 'encoder' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.

To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'encoder' as a dedicated pointer
to point to the found element.

Cc: stable@vger.kernel.org
Fixes: ec9eab097a500 ("drm/tilcdc: Add drm bridge support for attaching drm bridge drivers")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Jyri Sarha <jyri.sarha@iki.fi>
Tested-by: Jyri Sarha <jyri.sarha@iki.fi>
Signed-off-by: Jyri Sarha <jyri.sarha@iki.fi>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327061516.5076-1-xiam0nd.tong@gmail.com

gma500: fix an incorrect NULL check on list iterator

The bug is here:
return crtc;

The list iterator value 'crtc' will *always* be set and non-NULL by
list_for_each_entry(), so it is incorrect to assume that the iterator
value will be NULL if the list is empty or no element is found.

To fix the bug, return 'crtc' when found, otherwise return NULL.

Cc: stable@vger.kernel.org
fixes: 89c78134cc54d ("gma500: Add Poulsbo support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327052028.2013-1-xiam0nd.tong@gmail.com

drm/amdgpu: drop amdgpu_gtt_node

We have the BO pointer in the base structure now as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-6-christian.koenig@amd.com

drm/ttm: rework bulk move handling v5

Instead of providing the bulk move structure for each LRU update set
this as property of the BO. This should avoid costly bulk move rebuilds
with some games under RADV.

v2: some name polishing, add a few more kerneldoc words.
v3: add some lockdep
v4: fix bugs, handle pin/unpin as well
v5: improve kerneldoc

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-5-christian.koenig@amd.com

drm/ttm: de-inline ttm_bo_pin/unpin

Those functions are going to become more complex, don't inline them any
more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-4-christian.koenig@amd.com

drm/nouveau/kms/nv50-: atom: fix an incorrect NULL check on list iterator

The bug is here:
return encoder;

The list iterator value 'encoder' will *always* be set and non-NULL
by drm_for_each_encoder_mask(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element found.
Otherwise it will bypass some NULL checks and lead to invalid memory
access passing the check.

To fix this bug, just return 'encoder' when found, otherwise return
NULL.

Cc: stable@vger.kernel.org
Fixes: 12885ecbfe62d ("drm/nouveau/kms/nvd9-: Add CRC support")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
[Changed commit title]
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220327073925.11121-1-xiam0nd.tong@gmail.com

drm/ttm: allow bulk moves for all domains

Not just TT and VRAM.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-3-christian.koenig@amd.com

drm/ttm: add resource iterator v4

Instead of duplicating that at different places add an iterator over all
the resources in a resource manager.

v2: add lockdep annotation and kerneldoc
v3: fix various bugs pointed out by Felix
v4: simplify the code a bit more

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> (v2)
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-2-christian.koenig@amd.com

drm/ttm: move the LRU into resource handling v4

This way we finally fix the problem that new resource are
not immediately evict-able after allocation.

That has caused numerous problems including OOM on GDS handling
and not being able to use TTM as general resource manager.

v2: stop assuming in ttm_resource_fini that res->bo is still valid.
v3: cleanup kerneldoc, add more lockdep annotation
v4: consistently use res->num_pages

Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220321132601.2161-1-christian.koenig@amd.com

drm/sched: Fix htmldoc warning.

Fixes the warning.

Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220328132532.406572-1-andrey.grodzovsky@amd.com

drm/bridge: anx7625: Set downstream sink into normal status

As downstream sink was set into standby mode while bridge disabled,
this patch used for setting downstream sink into normal status
while enable bridge.

Signed-off-by: Xin Ji <xji@analogixsemi.com>
Reviewed-by: Pin-Yen Lin <treapking@chromium.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220322080213.1487134-1-xji@analogixsemi.com

drm: omapdrm: Do no allocate non-scanout GEMs through DMM/TILER

On devices with DMM, all allocations are done through either DMM or TILER.
DMM/TILER being a limited resource means that such allocations will start
to fail before actual free memory is exhausted. What is even worse is that
with time DMM/TILER space gets fragmented to the point that even if we have
enough free DMM/TILER space and free memory, allocation fails because there
is no big enough free block in DMM/TILER space.

Such failures can be easily observed with OMAP xorg DDX, for example -
starting few GUI applications (so buffers for their windows are allocated)
and then rotating landscape<->portrait while closing and opening new
windows soon results in allocation failures.

Fix that by mapping buffers through DMM/TILER only when really needed,
like, for scanout buffers.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-4-git-send-email-ivo.g.dimitrov.75@gmail.com

drm: omapdrm: Support exporting of non-contiguous GEM BOs

Currently code allocates non-scanout BOs from SHMEM and those objects are
accessible to userspace by mmap(). However, on devices with no DMM (like
OMAP3), the same objects are not accessible by kernel drivers that want to
render to them as code refuses to export them. In turn this means that on
devices with no DMM, all buffers must be allocated as scanout, otherwise
only CPU can access them. On those devices, scanout buffers are allocated
from CMA, making those allocations highly unreliable.

Fix that by implementing functionality to export SHMEM backed buffers on
devices with no DMM. This makes CMA memory only being used when needed,
instead for every buffer that has to be off-CPU rendered.

Tested on Motorola Droid4 and Nokia N900

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-3-git-send-email-ivo.g.dimitrov.75@gmail.com

drm: omapdrm: simplify omap_gem_pin

Move tiler related code to its own function.

Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1642587791-13222-2-git-send-email-ivo.g.dimitrov.75@gmail.com

drm/qxl: fix qxl can't use in arm64

qxl use ioremap to map ram_header and rom, in the arm64 implementation,
the device is mapped as DEVICE_nGnRE, it can not support unaligned
access. and qxl is a virtual device, it can be treated more like RAM
than actual MMIO registers. use ioremap_wc() replace it.

Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Acked-by: Christian König <christian.koenig@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220324104928.2959545-1-liucong2@kylinos.cn
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: Remove restriction of non-zero blob_flags

With native userspace drivers in guest, a lot of GEM objects need to be
neither shared nor mappable.  And in fact making everything mappable
and/or sharable results in unreasonably high fd usage in host VMM.

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220219170301.545432-1-robdclark@gmail.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace:
[  168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[  168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567408] Call trace:
[  168.567414]  dump_backtrace+0x0/0x310
[  168.567418]  show_stack+0x28/0x38
[  168.567423]  dump_stack+0xec/0x15c
[  168.567427]  should_fail+0x3ac/0x3d0
[  168.567437]  __should_failslab+0xb8/0x120
[  168.567441]  should_failslab+0x28/0xc0
[  168.567445]  kmem_cache_alloc_trace+0x50/0x640
[  168.567454]  drm_mode_create+0x40/0x90
[  168.567458]  drm_cvt_mode+0x48/0xc78
[  168.567477]  virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[  168.567485]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567492]  drm_mode_getconnector+0x2e0/0xa70
[  168.567496]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567514]  drm_ioctl+0x558/0x6d0
[  168.567522]  do_vfs_ioctl+0x160/0xf30
[  168.567525]  ksys_ioctl+0x98/0xd8
[  168.567530]  __arm64_sys_ioctl+0x50/0xc8
[  168.567536]  el0_svc_common+0xc8/0x320
[  168.567540]  el0_svc_handler+0xf8/0x160
[  168.567544]  el0_svc+0x10/0x218

KASAN stacktrace:
[  168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[  168.567566]
[  168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[  168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[  168.567575] Call trace:
[  168.567578]  dump_backtrace+0x0/0x310
[  168.567582]  show_stack+0x28/0x38
[  168.567586]  dump_stack+0xec/0x15c
[  168.567591]  kasan_report+0x244/0x2f0
[  168.567594]  __asan_load4+0x58/0xb0
[  168.567607]  virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[  168.567612]  drm_helper_probe_single_connector_modes+0x3a4/0xd80
[  168.567617]  drm_mode_getconnector+0x2e0/0xa70
[  168.567621]  drm_ioctl_kernel+0x11c/0x1d8
[  168.567624]  drm_ioctl+0x558/0x6d0
[  168.567628]  do_vfs_ioctl+0x160/0xf30
[  168.567632]  ksys_ioctl+0x98/0xd8
[  168.567636]  __arm64_sys_ioctl+0x50/0xc8
[  168.567641]  el0_svc_common+0xc8/0x320
[  168.567645]  el0_svc_handler+0xf8/0x160
[  168.567649]  el0_svc+0x10/0x218

Signed-off-by: Liu Zixian <liuzixian4@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian4@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/vc4: hdmi: Support HDMI YUV output

In addition to the RGB444 output, the BCM2711 HDMI controller supports
the YUV444 and YUV422 output formats.

Let's add support for them in the driver, but still use RGB as the
preferred format.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-8-maxime@cerno.tech

drm/vc4: hdmi: Always try to have the highest bpc

Currently we take the max_bpc property as the bpc value and do not try
anything else.

However, what the other drivers seem to be doing is that they would try
with the highest bpc allowed by the max_bpc property and the hardware
capabilities, test if it results in an acceptable configuration, and if
not decrease the bpc and try again.

Let's use the same logic.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-7-maxime@cerno.tech

drm/vc4: hdmi: Take bpp into account for the scrambler

The current code only base its decision for whether the scrambler must be
enabled or not on the pixel clock of the mode, but doesn't take the bits
per color into account.

Let's leverage the new function to compute the clock rate in the
scrambler setup code.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-6-maxime@cerno.tech

drm/vc4: hdmi: Take the sink maximum TMDS clock into account

In the function that validates that the clock isn't too high, we've only
taken our controller limitations into account so far.

However, the sink can have a limit on the maximum TMDS clock it can deal
with too which is exposed through the EDID and the drm_display_info.

Make sure we check it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-5-maxime@cerno.tech

drm/vc4: hdmi: Move clock calculation into its own function

The code to compute our clock rate for a given setup will be called in
multiple places in the next patches, so let's create a separate function
for it.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-4-maxime@cerno.tech

drm/vc4: hdmi: Move clock validation to its own function

Our code is doing the same clock rate validation in multiple instances.
Let's create a helper to share the rate validation.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-3-maxime@cerno.tech

drm/vc4: hdmi: Rename pixel_rate variable

The pixel_rate field in the vc4_hdmi_connector_state struct actually
stores the TMDS character rate, let's rename it for consistency.

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220222164042.403112-2-maxime@cerno.tech