David S. Miller [Sun, 20 Jan 2019 00:38:12 +0000 (16:38 -0800)]
Merge git://git./pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2019-01-20
The following pull-request contains BPF updates for your *net* tree.
The main changes are:
1) Fix a out-of-bounds access in __bpf_redirect_no_mac, from Willem.
2) Fix bpf_setsockopt to reset sock dst on SO_MARK changes, from Peter.
3) Fix map in map masking to prevent out-of-bounds access under
speculative execution, from Daniel.
4) Fix bpf_setsockopt's SO_MAX_PACING_RATE to support TCP internal
pacing, from Yuchung.
5) Fix json writer license in bpftool, from Thomas.
6) Fix AF_XDP to check if an actually queue exists during umem
setup, from Krzysztof.
7) Several fixes to BPF stackmap's build id handling. Another fix
for bpftool build to account for libbfd variations wrt linking
requirements, from Stanislav.
8) Fix BPF samples build with clang by working around missing asm
goto, from Yonghong.
9) Fix libbpf to retry program load on signal interrupt, from Lorenz.
10) Various minor compile warning fixes in BPF code, from Mathieu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Wed, 16 Jan 2019 01:19:22 +0000 (20:19 -0500)]
bpf: in __bpf_redirect_no_mac pull mac only if present
Syzkaller was able to construct a packet of negative length by
redirecting from bpf_prog_test_run_skb with BPF_PROG_TYPE_LWT_XMIT:
BUG: KASAN: slab-out-of-bounds in memcpy include/linux/string.h:345 [inline]
BUG: KASAN: slab-out-of-bounds in skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
BUG: KASAN: slab-out-of-bounds in __pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
Read of size
4294967282 at addr
ffff8801d798009c by task syz-executor2/12942
kasan_report.cold.9+0x242/0x309 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x23/0x50 mm/kasan/kasan.c:302
memcpy include/linux/string.h:345 [inline]
skb_copy_from_linear_data include/linux/skbuff.h:3421 [inline]
__pskb_copy_fclone+0x2dd/0xeb0 net/core/skbuff.c:1395
__pskb_copy include/linux/skbuff.h:1053 [inline]
pskb_copy include/linux/skbuff.h:2904 [inline]
skb_realloc_headroom+0xe7/0x120 net/core/skbuff.c:1539
ipip6_tunnel_xmit net/ipv6/sit.c:965 [inline]
sit_tunnel_xmit+0xe1b/0x30d0 net/ipv6/sit.c:1029
__netdev_start_xmit include/linux/netdevice.h:4325 [inline]
netdev_start_xmit include/linux/netdevice.h:4334 [inline]
xmit_one net/core/dev.c:3219 [inline]
dev_hard_start_xmit+0x295/0xc90 net/core/dev.c:3235
__dev_queue_xmit+0x2f0d/0x3950 net/core/dev.c:3805
dev_queue_xmit+0x17/0x20 net/core/dev.c:3838
__bpf_tx_skb net/core/filter.c:2016 [inline]
__bpf_redirect_common net/core/filter.c:2054 [inline]
__bpf_redirect+0x5cf/0xb20 net/core/filter.c:2061
____bpf_clone_redirect net/core/filter.c:2094 [inline]
bpf_clone_redirect+0x2f6/0x490 net/core/filter.c:2066
bpf_prog_41f2bcae09cd4ac3+0xb25/0x1000
The generated test constructs a packet with mac header, network
header, skb->data pointing to network header and skb->len 0.
Redirecting to a sit0 through __bpf_redirect_no_mac pulls the
mac length, even though skb->data already is at skb->network_header.
bpf_prog_test_run_skb has already pulled it as LWT_XMIT !is_l2.
Update the offset calculation to pull only if skb->data differs
from skb->network_header, which is not true in this case.
The test itself can be run only from commit
1cf1cae963c2 ("bpf:
introduce BPF_PROG_TEST_RUN command"), but the same type of packets
with skb at network header could already be built from lwt xmit hooks,
so this fix is more relevant to that commit.
Also set the mac header on redirect from LWT_XMIT, as even after this
change to __bpf_redirect_no_mac that field is expected to be set, but
is not yet in ip_finish_output2.
Fixes:
3a0af8fd61f9 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Michael S. Tsirkin [Fri, 18 Jan 2019 04:20:07 +0000 (23:20 -0500)]
virtio_net: bulk free tx skbs
Use napi_consume_skb() to get bulk free. Note that napi_consume_skb is
safe to call in a non-napi context as long as the napi_budget flag is
correct.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Camelia Groza [Thu, 17 Jan 2019 12:22:36 +0000 (14:22 +0200)]
net: phy: phy driver features are mandatory
Since phy driver features became a link_mode bitmap, phy drivers that
don't have a list of features configured will cause the kernel to crash
when probed.
Prevent the phy driver from registering if the features field is missing.
Fixes:
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nathan Chancellor [Thu, 10 Jan 2019 05:41:08 +0000 (22:41 -0700)]
isdn: avm: Fix string plus integer warning from Clang
A recent commit in Clang expanded the -Wstring-plus-int warning, showing
some odd behavior in this file.
drivers/isdn/hardware/avm/b1.c:426:30: warning: adding 'int' to a string does not append to the string [-Wstring-plus-int]
cinfo->version[j] = "\0\0" + 1;
~~~~~~~^~~
drivers/isdn/hardware/avm/b1.c:426:30: note: use array indexing to silence this warning
cinfo->version[j] = "\0\0" + 1;
^
& [ ]
1 warning generated.
This is equivalent to just "\0". Nick pointed out that it is smarter to
use "" instead of "\0" because "" is used elsewhere in the kernel and
can be deduplicated at the linking stage.
Link: https://github.com/ClangBuiltLinux/linux/issues/309
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sat, 19 Jan 2019 02:23:23 +0000 (18:23 -0800)]
Merge tag 'mlx5-fixes-2019-01-18' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
Mellanox, mlx5 fixes 2019-01-18
This series introduces some fixes to mlx5 driver.
Please pull and let me know if there is any problem.
For -stable v4.18
('net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames')
The patch doesn't apply cleanly to 4.18.y, but it is very simple to
resolve, what should be the procedure here ?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Britstein [Wed, 19 Dec 2018 05:36:51 +0000 (07:36 +0200)]
net/mlx5e: Fix cb_ident duplicate in indirect block register
Previously the identifier used for indirect block callback registry
and for block rule cb registry (when done via indirect blocks) was the
pointer to the tunnel netdev we were interested in receiving updates on.
This worked fine if a single PF existed that registered one callback for
the tunnel netdev of interest. However, if multiple PFs are in place then
the 2nd PF tries to register with the same tunnel netdev identifier. This
leads to EEXIST errors and/or incorrect cb deletions.
Prevent this conflict by using the rpriv pointer as the identifier for
netdev indirect block cb registry, allowing each PF to register a unique
callback per tunnel netdev. For block cb registry, the same PF may
register multiple cbs to the same block if using TC shared blocks.
Instead of the rpriv, use the pointer to the allocated indr_priv data as
the identifier here. This means that there can be a unique block callback
for each PF/tunnel netdev combo.
Fixes:
f5bc2c5de101 ("net/mlx5e: Support TC indirect block notifications
for eswitch uplink reprs")
Signed-off-by: Eli Britstein <elibr@mellanox.com>
Reviewed-by: Oz Shlomo <ozsh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Tariq Toukan [Thu, 8 Nov 2018 10:06:53 +0000 (12:06 +0200)]
net/mlx5e: Fix wrong (zero) TX drop counter indication for representor
For representors, the TX dropped counter is not folded from the
per-ring counters. Fix it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Shay Agroskin [Sun, 9 Dec 2018 10:00:13 +0000 (12:00 +0200)]
net/mlx5e: Fix wrong error code return on FEC query failure
Advertised and configured FEC query failure resulted in printing
wrong error code.
Fixes:
6cfa94605091 ("net/mlx5e: Ethtool driver callback for query/set FEC policy")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reported-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Cong Wang [Tue, 4 Dec 2018 06:14:04 +0000 (22:14 -0800)]
net/mlx5e: Force CHECKSUM_UNNECESSARY for short ethernet frames
When an ethernet frame is padded to meet the minimum ethernet frame
size, the padding octets are not covered by the hardware checksum.
Fortunately the padding octets are usually zero's, which don't affect
checksum. However, we have a switch which pads non-zero octets, this
causes kernel hardware checksum fault repeatedly.
Prior to:
commit '
88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE ...")'
skb checksum was forced to be CHECKSUM_NONE when padding is detected.
After it, we need to keep skb->csum updated, like what we do for RXFCS.
However, fixing up CHECKSUM_COMPLETE requires to verify and parse IP
headers, it is not worthy the effort as the packets are so small that
CHECKSUM_COMPLETE can't save anything.
Fixes:
88078d98d1bb ("net: pskb_trim_rcsum() and CHECKSUM_COMPLETE are friends"),
Cc: Eric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Nikola Ciprich <nikola.ciprich@linuxbox.cz>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Thomas Gleixner [Thu, 17 Jan 2019 23:14:24 +0000 (00:14 +0100)]
tools: bpftool: Cleanup license mess
Precise and non-ambiguous license information is important. The recent
relicensing of the bpftools introduced a license conflict.
The files have now:
SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause
and
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version
Amazingly about 20 people acked that change and neither they nor the
committer noticed. Oh well.
Digging deeper: The files were imported from the iproute2 repository with
the GPL V2 or later boiler plate text in commit
b66e907cfee2 ("tools:
bpftool: copy JSON writer from iproute2 repository")
Looking at the iproute2 repository at
git://git.kernel.org/pub/scm/network/iproute2/iproute2.git
the following commit is the equivivalent:
commit
d9d8c839 ("json_writer: add SPDX Identifier (GPL-2/BSD-2)")
That commit explicitly removes the boiler plate and relicenses the code
uner GPL-2.0-only and BSD-2-Clause. As Steven wrote the original code and
also the relicensing commit, it's assumed that the relicensing was intended
to do exaclty that. Just the kernel side update failed to remove the boiler
plate. Do so now.
Fixes:
907b22365115 ("tools: bpftool: dual license all files")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: Sean Young <sean@mess.org>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: David Calavera <david.calavera@gmail.com>
Cc: Andrey Ignatov <rdna@fb.com>
Cc: Joe Stringer <joe@wand.net.nz>
Cc: David Ahern <dsahern@gmail.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Petar Penkov <ppenkov@stanford.edu>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
CC: okash.khawaja@gmail.com
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 17 Jan 2019 15:34:45 +0000 (16:34 +0100)]
bpf: fix inner map masking to prevent oob under speculation
During review I noticed that inner meta map setup for map in
map is buggy in that it does not propagate all needed data
from the reference map which the verifier is later accessing.
In particular one such case is index masking to prevent out of
bounds access under speculative execution due to missing the
map's unpriv_array/index_mask field propagation. Fix this such
that the verifier is generating the correct code for inlined
lookups in case of unpriviledged use.
Before patch (test_verifier's 'map in map access' dump):
# bpftool prog dump xla id 3
0: (62) *(u32 *)(r10 -4) = 0
1: (bf) r2 = r10
2: (07) r2 += -4
3: (18) r1 = map[id:4]
5: (07) r1 += 272 |
6: (61) r0 = *(u32 *)(r2 +0) |
7: (35) if r0 >= 0x1 goto pc+6 | Inlined map in map lookup
8: (54) (u32) r0 &= (u32) 0 | with index masking for
9: (67) r0 <<= 3 | map->unpriv_array.
10: (0f) r0 += r1 |
11: (79) r0 = *(u64 *)(r0 +0) |
12: (15) if r0 == 0x0 goto pc+1 |
13: (05) goto pc+1 |
14: (b7) r0 = 0 |
15: (15) if r0 == 0x0 goto pc+11
16: (62) *(u32 *)(r10 -4) = 0
17: (bf) r2 = r10
18: (07) r2 += -4
19: (bf) r1 = r0
20: (07) r1 += 272 |
21: (61) r0 = *(u32 *)(r2 +0) | Index masking missing (!)
22: (35) if r0 >= 0x1 goto pc+3 | for inner map despite
23: (67) r0 <<= 3 | map->unpriv_array set.
24: (0f) r0 += r1 |
25: (05) goto pc+1 |
26: (b7) r0 = 0 |
27: (b7) r0 = 0
28: (95) exit
After patch:
# bpftool prog dump xla id 1
0: (62) *(u32 *)(r10 -4) = 0
1: (bf) r2 = r10
2: (07) r2 += -4
3: (18) r1 = map[id:2]
5: (07) r1 += 272 |
6: (61) r0 = *(u32 *)(r2 +0) |
7: (35) if r0 >= 0x1 goto pc+6 | Same inlined map in map lookup
8: (54) (u32) r0 &= (u32) 0 | with index masking due to
9: (67) r0 <<= 3 | map->unpriv_array.
10: (0f) r0 += r1 |
11: (79) r0 = *(u64 *)(r0 +0) |
12: (15) if r0 == 0x0 goto pc+1 |
13: (05) goto pc+1 |
14: (b7) r0 = 0 |
15: (15) if r0 == 0x0 goto pc+12
16: (62) *(u32 *)(r10 -4) = 0
17: (bf) r2 = r10
18: (07) r2 += -4
19: (bf) r1 = r0
20: (07) r1 += 272 |
21: (61) r0 = *(u32 *)(r2 +0) |
22: (35) if r0 >= 0x1 goto pc+4 | Now fixed inlined inner map
23: (54) (u32) r0 &= (u32) 0 | lookup with proper index masking
24: (67) r0 <<= 3 | for map->unpriv_array.
25: (0f) r0 += r1 |
26: (05) goto pc+1 |
27: (b7) r0 = 0 |
28: (b7) r0 = 0
29: (95) exit
Fixes:
b2157399cc98 ("bpf: prevent out-of-bounds speculation")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Daniel Borkmann [Thu, 17 Jan 2019 15:15:09 +0000 (16:15 +0100)]
bpf: pull in pkt_sched.h header for tooling to fix bpftool build
Dan reported that bpftool does not compile for him:
$ make tools/bpf
DESCEND bpf
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
DESCEND bpftool
Auto-detecting system features:
.. libbfd: [ on ]
.. disassembler-four-args: [ OFF ]
CC /opt/linux.git/tools/bpf/bpftool/net.o
In file included from /opt/linux.git/tools/include/uapi/linux/pkt_cls.h:6:0,
from /opt/linux.git/tools/include/uapi/linux/tc_act/tc_bpf.h:14,
from net.c:13:
net.c: In function 'show_dev_tc_bpf':
net.c:164:21: error: 'TC_H_CLSACT' undeclared (first use in this function)
handle = TC_H_MAKE(TC_H_CLSACT, TC_H_MIN_INGRESS);
[...]
Fix it by importing pkt_sched.h header copy into tooling
infrastructure.
Fixes:
49a249c38726 ("tools/bpftool: copy a few net uapi headers to tools directory")
Fixes:
f6f3bac08ff9 ("tools/bpf: bpftool: add net support")
Reported-by: Dan Gilson <dan_gilson@yahoo.com>
Reference: https://bugzilla.kernel.org/show_bug.cgi?id=202315
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
David S. Miller [Fri, 18 Jan 2019 23:12:16 +0000 (15:12 -0800)]
Merge branch 'mlxsw-fixes'
Ido Schimmel says:
====================
mlxsw: Various fixes
This patchset contains small fixes in mlxsw and one fix in the bridge
driver.
Patches #1-#4 perform small adjustments in PCI and FID code following
recent tests that were performed on the Spectrum-2 ASIC.
Patch #5 fixes the bridge driver to mark FDB entries that were added by
user as such. Otherwise, these entries will be ignored by underlying
switch drivers.
Patch #6 fixes a long standing issue in mlxsw where the driver
incorrectly programmed static FDB entries as both static and sticky.
Patches #7-#8 add test cases for above mentioned bugs.
Please consider patches #1, #2 and #4 for stable.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 18 Jan 2019 15:58:03 +0000 (15:58 +0000)]
selftests: forwarding: Add a test case for externally learned FDB entries
Test that externally learned FDB entries can roam, but not age out.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 18 Jan 2019 15:58:02 +0000 (15:58 +0000)]
selftests: mlxsw: Test FDB offload indication
Test that externally learned FDB entries added from user space are
marked as offloaded.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 18 Jan 2019 15:58:01 +0000 (15:58 +0000)]
mlxsw: spectrum_switchdev: Do not treat static FDB entries as sticky
The driver currently treats static FDB entries as both static and
sticky. This is incorrect and prevents such entries from being roamed to
a different port via learning.
Fix this by configuring static entries with ageing disabled and roaming
enabled.
In net-next we can add proper support for the newly introduced 'sticky'
flag.
Fixes:
56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 18 Jan 2019 15:58:00 +0000 (15:58 +0000)]
net: bridge: Mark FDB entries that were added by user as such
Externally learned entries can be added by a user or by a switch driver
that is notifying the bridge driver about entries that were learned in
hardware.
In the first case, the entries are not marked with the 'added_by_user'
flag, which causes switch drivers to ignore them and not offload them.
The 'added_by_user' flag can be set on externally learned FDB entries
based on the 'swdev_notify' parameter in br_fdb_external_learn_add(),
which effectively means if the created / updated FDB entry was added by
a user or not.
Fixes:
816a3bed9549 ("switchdev: Add fdb.added_by_user to switchdev notifications")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Alexander Petrovskiy <alexpe@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: bridge@lists.linux-foundation.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Fri, 18 Jan 2019 15:57:59 +0000 (15:57 +0000)]
mlxsw: spectrum_fid: Update dummy FID index
When using a tc flower action of egress mirred redirect, the driver adds
an implicit FID setting action. This implicit action sets a dummy FID to
the packet and is used as part of a design for trapping unmatched flows
in OVS. While this implicit FID setting action is supposed to be a NOP
when a redirect action is added, in Spectrum-2 the FID record is
consulted as the dummy FID index is an 802.1D FID index and the packet
is dropped instead of being redirected.
Set the dummy FID index value to be within 802.1Q range. This satisfies
both Spectrum-1 which ignores the FID and Spectrum-2 which identifies it
as an 802.1Q FID and will then follow the redirect action.
Fixes:
c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Fri, 18 Jan 2019 15:57:57 +0000 (15:57 +0000)]
mlxsw: pci: Return error on PCI reset timeout
Return an appropriate error in the case when the driver timeouts on waiting
for firmware to go out of PCI reset.
Fixes:
233fa44bd67a ("mlxsw: pci: Implement reset done check")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nir Dotan [Fri, 18 Jan 2019 15:57:56 +0000 (15:57 +0000)]
mlxsw: pci: Increase PCI SW reset timeout
Spectrum-2 PHY layer introduces a calibration period which is a part of the
Spectrum-2 firmware boot process. Hence increase the SW timeout waiting for
the firmware to come out of boot. This does not increase system boot time
in cases where the firmware PHY calibration process is done quickly.
Fixes:
c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Fri, 18 Jan 2019 15:57:55 +0000 (15:57 +0000)]
mlxsw: pci: Ring CQ's doorbell before RDQ's
When a packet should be trapped to the CPU the device consumes a WQE
(work queue element) from an RDQ (receive descriptor queue) and copies
the packet to the address specified in the WQE. The device then tries to
post a CQE (completion queue element) that contains various metadata
(e.g., ingress port) about the packet to a CQ (completion queue).
In case the device managed to consume a WQE, but did not manage to post
the corresponding CQE, it will get stuck. This unlikely situation can be
triggered due to the scheme the driver is currently using to process
CQEs.
The driver will consume up to 512 CQEs at a time and after processing
each corresponding WQE it will ring the RDQ's doorbell, letting the
device know that a new WQE was posted for it to consume. Only after
processing all the CQEs (up to 512), the driver will ring the CQ's
doorbell, letting the device know that new ones can be posted.
Fix this by having the driver ring the CQ's doorbell for every processed
CQE, but before ringing the RDQ's doorbell. This guarantees that
whenever we post a new WQE, there is a corresponding CQE available. Copy
the currently processed CQE to prevent the device from overwriting it
with a new CQE after ringing the doorbell.
Note that the driver still arms the CQ only after processing all the
pending CQEs, so that interrupts for this CQ will only be delivered
after the driver finished its processing.
Before commit
8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1
and version 2") the issue was virtually impossible to trigger since the
number of CQEs was twice the number of WQEs and the number of CQEs
processed at a time was equal to the number of available WQEs.
Fixes:
8404f6f2e8ed ("mlxsw: pci: Allow to use CQEs of version 1 and version 2")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reported-by: Semion Lisyansky <semionl@mellanox.com>
Tested-by: Semion Lisyansky <semionl@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Felix Manlunas [Thu, 17 Jan 2019 18:07:45 +0000 (18:07 +0000)]
MAINTAINERS: update email addresses of liquidio driver maintainers
Update email addresses of liquidio driver maintainers. Also remove a
former maintainer.
Signed-off-by: Felix Manlunas <fmanlunas@marvell.com>
Acked-by: Derek Chickles <dchickles@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jonathan Neuschäfer [Thu, 17 Jan 2019 17:02:18 +0000 (18:02 +0100)]
net: Fix typo in NET_FAILOVER help text
"also enables" should not be spelled as one word.
Fixes:
cfc80d9a1163 ("net: Introduce net_failover driver")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ross Lagerwall [Thu, 17 Jan 2019 15:34:38 +0000 (15:34 +0000)]
net: Fix usage of pskb_trim_rcsum
In certain cases, pskb_trim_rcsum() may change skb pointers.
Reinitialize header pointers afterwards to avoid potential
use-after-frees. Add a note in the documentation of
pskb_trim_rcsum(). Found by KASAN.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Petazzoni [Wed, 16 Jan 2019 09:53:58 +0000 (10:53 +0100)]
net: phy: mdio_bus: add missing device_del() in mdiobus_register() error handling
The current code in __mdiobus_register() doesn't properly handle
failures returned by the devm_gpiod_get_optional() call: it returns
immediately, without unregistering the device that was added by the
call to device_register() earlier in the function.
This leaves a stale device, which then causes a NULL pointer
dereference in the code that handles deferred probing:
[ 1.489982] Unable to handle kernel NULL pointer dereference at virtual address
00000074
[ 1.498110] pgd = (ptrval)
[ 1.500838] [
00000074] *pgd=
00000000
[ 1.504432] Internal error: Oops: 17 [#1] SMP ARM
[ 1.509133] Modules linked in:
[ 1.512192] CPU: 1 PID: 51 Comm: kworker/1:3 Not tainted 4.20.0-00039-g3b73a4cc8b3e-dirty #99
[ 1.520708] Hardware name: Xilinx Zynq Platform
[ 1.525261] Workqueue: events deferred_probe_work_func
[ 1.530403] PC is at klist_next+0x10/0xfc
[ 1.534403] LR is at device_for_each_child+0x40/0x94
[ 1.539361] pc : [<
c0683fbc>] lr : [<
c0455d90>] psr:
200e0013
[ 1.545628] sp :
ceeefe68 ip :
00000001 fp :
ffffe000
[ 1.550863] r10:
00000000 r9 :
c0c66790 r8 :
00000000
[ 1.556079] r7 :
c0457d44 r6 :
00000000 r5 :
ceeefe8c r4 :
cfa2ec78
[ 1.562604] r3 :
00000064 r2 :
c0457d44 r1 :
ceeefe8c r0 :
00000064
[ 1.569129] Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 1.576263] Control:
18c5387d Table:
0ed7804a DAC:
00000051
[ 1.582013] Process kworker/1:3 (pid: 51, stack limit = 0x(ptrval))
[ 1.588280] Stack: (0xceeefe68 to 0xceef0000)
[ 1.592630] fe60:
cfa2ec78 c0c03c08 00000000 c0457d44 00000000 c0c66790
[ 1.600814] fe80:
00000000 c0455d90 ceeefeac 00000064 00000000 0d7a542e cee9d494 cfa2ec78
[ 1.608998] fea0:
cfa2ec78 00000000 c0457d44 c0457d7c cee9d494 c0c03c08 00000000 c0455dac
[ 1.617182] fec0:
cf98ba44 cf926a00 cee9d494 0d7a542e 00000000 cf935a10 cf935a10 cf935a10
[ 1.625366] fee0:
c0c4e9b8 c0457d7c c0c4e80c 00000001 cf935a10 c0457df4 cf935a10 c0c4e99c
[ 1.633550] ff00:
c0c4e99c c045a27c c0c4e9c4 ced63f80 cfde8a80 cfdebc00 00000000 c013893c
[ 1.641734] ff20:
cfde8a80 cfde8a80 c07bd354 ced63f80 ced63f94 cfde8a80 00000008 c0c02d00
[ 1.649936] ff40:
cfde8a98 cfde8a80 ffffe000 c0139a30 ffffe000 c0c6624a c07bd354 00000000
[ 1.658120] ff60:
ffffe000 cee9e780 ceebfe00 00000000 ceeee000 ced63f80 c0139788 cf8cdea4
[ 1.666304] ff80:
cee9e79c c013e598 00000001 ceebfe00 c013e44c 00000000 00000000 00000000
[ 1.674488] ffa0:
00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000
[ 1.682671] ffc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.690855] ffe0:
00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[ 1.699058] [<
c0683fbc>] (klist_next) from [<
c0455d90>] (device_for_each_child+0x40/0x94)
[ 1.707241] [<
c0455d90>] (device_for_each_child) from [<
c0457d7c>] (device_reorder_to_tail+0x38/0x88)
[ 1.716476] [<
c0457d7c>] (device_reorder_to_tail) from [<
c0455dac>] (device_for_each_child+0x5c/0x94)
[ 1.725692] [<
c0455dac>] (device_for_each_child) from [<
c0457d7c>] (device_reorder_to_tail+0x38/0x88)
[ 1.734927] [<
c0457d7c>] (device_reorder_to_tail) from [<
c0457df4>] (device_pm_move_to_tail+0x28/0x40)
[ 1.744235] [<
c0457df4>] (device_pm_move_to_tail) from [<
c045a27c>] (deferred_probe_work_func+0x58/0x8c)
[ 1.753746] [<
c045a27c>] (deferred_probe_work_func) from [<
c013893c>] (process_one_work+0x210/0x4fc)
[ 1.762888] [<
c013893c>] (process_one_work) from [<
c0139a30>] (worker_thread+0x2a8/0x5c0)
[ 1.771072] [<
c0139a30>] (worker_thread) from [<
c013e598>] (kthread+0x14c/0x154)
[ 1.778482] [<
c013e598>] (kthread) from [<
c01010e8>] (ret_from_fork+0x14/0x2c)
[ 1.785689] Exception stack(0xceeeffb0 to 0xceeefff8)
[ 1.790739] ffa0:
00000000 00000000 00000000 00000000
[ 1.798923] ffc0:
00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 1.807107] ffe0:
00000000 00000000 00000000 00000000 00000013 00000000
[ 1.813724] Code:
e92d47f0 e1a05000 e8900048 e1a00003 (
e5937010)
[ 1.819844] ---[ end trace
3c2c0c8b65399ec9 ]---
The actual error that we had from devm_gpiod_get_optional() was
-EPROBE_DEFER, due to the GPIO being provided by a driver that is
probed later than the Ethernet controller driver.
To fix this, we simply add the missing device_del() invocation in the
error path.
Fixes:
69226896ad636 ("mdio_bus: Issue GPIO RESET to PHYs")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Otto Sabart [Mon, 14 Jan 2019 11:56:36 +0000 (12:56 +0100)]
doc: net: fix bad references to network drivers
Fix "reference to nonexisting document" warnings.
Fixes:
b255e500c8dc ("net: documentation: build a directory structure for drivers")
Signed-off-by: Otto Sabart <ottosabart@seberm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Thu, 17 Jan 2019 15:30:03 +0000 (23:30 +0800)]
macvlan: replace kfree_skb by consume_skb for drop profiles
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
perf) friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yang Wei [Thu, 17 Jan 2019 15:11:30 +0000 (23:11 +0800)]
neighbour: Do not perturb drop profiles when neigh_probe
Replace the kfree_skb() by consume_skb() to be drop monitor(dropwatch,
perf) friendly.
Signed-off-by: Yang Wei <yang.wei9@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lendacky, Thomas [Thu, 17 Jan 2019 14:20:14 +0000 (14:20 +0000)]
amd-xgbe: Fix mdio access for non-zero ports and clause 45 PHYs
The XGBE hardware has support for performing MDIO operations using an
MDIO command request. The driver mistakenly uses the mdio port address
as the MDIO command request device address instead of the MDIO command
request port address. Additionally, the driver does not properly check
for and create a clause 45 MDIO command.
Check the supplied MDIO register to determine if the request is a clause
45 operation (MII_ADDR_C45). For a clause 45 operation, extract the device
address and register number from the supplied MDIO register and use them
to set the MDIO command request device address and register number fields.
For a clause 22 operation, the MDIO request device address is set to zero
and the MDIO command request register number is set to the supplied MDIO
register. In either case, the supplied MDIO port address is used as the
MDIO command request port address.
Fixes:
732f2ab7afb9 ("amd-xgbe: Add support for MDIO attached PHYs")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Tested-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Camelia Groza [Thu, 17 Jan 2019 12:33:33 +0000 (14:33 +0200)]
net: phy: add missing phy driver features
The phy drivers for CS4340 and TN2020 are missing their
features attributes. Add them.
Fixes:
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Madalin Bucur [Thu, 17 Jan 2019 09:42:27 +0000 (11:42 +0200)]
dpaa_eth: NETIF_F_LLTX requires to do our own update of trans_start
As txq_trans_update() only updates trans_start when the lock is held,
trans_start does not get updated if NETIF_F_LLTX is declared.
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yunjian Wang [Thu, 17 Jan 2019 01:46:41 +0000 (09:46 +0800)]
net: bridge: Fix ethernet header pointer before check skb forwardable
The skb header should be set to ethernet header before using
is_skb_forwardable. Because the ethernet header length has been
considered in is_skb_forwardable(including dev->hard_header_len
length).
To reproduce the issue:
1, add 2 ports on linux bridge br using following commands:
$ brctl addbr br
$ brctl addif br eth0
$ brctl addif br eth1
2, the MTU of eth0 and eth1 is 1500
3, send a packet(Data 1480, UDP 8, IP 20, Ethernet 14, VLAN 4)
from eth0 to eth1
So the expect result is packet larger than 1500 cannot pass through
eth0 and eth1. But currently, the packet passes through success, it
means eth1's MTU limit doesn't take effect.
Fixes:
f6367b4660dd ("bridge: use is_skb_forwardable in forward path")
Cc: bridge@lists.linux-foundation.org
Cc: Nkolay Aleksandrov <nikolay@cumulusnetworks.com>
Cc: Roopa Prabhu <roopa@cumulusnetworks.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jason Wang [Wed, 16 Jan 2019 08:54:42 +0000 (16:54 +0800)]
vhost: log dirty page correctly
Vhost dirty page logging API is designed to sync through GPA. But we
try to log GIOVA when device IOTLB is enabled. This is wrong and may
lead to missing data after migration.
To solve this issue, when logging with device IOTLB enabled, we will:
1) reuse the device IOTLB translation result of GIOVA->HVA mapping to
get HVA, for writable descriptor, get HVA through iovec. For used
ring update, translate its GIOVA to HVA
2) traverse the GPA->HVA mapping to get the possible GPA and log
through GPA. Pay attention this reverse mapping is not guaranteed
to be unique, so we should log each possible GPA in this case.
This fix the failure of scp to guest during migration. In -next, we
will probably support passing GIOVA->GPA instead of GIOVA->HVA.
Fixes:
6b1e6cc7855b ("vhost: new device IOTLB API")
Reported-by: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 12 Jan 2019 20:51:05 +0000 (12:51 -0800)]
Documentation: timestamping: correct path to net_tstamp.h
net_tstamp.h is an UAPI header, so it was moved under include/uapi.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 17 Jan 2019 10:27:22 +0000 (11:27 +0100)]
af_packet: fix raw sockets over 6in4 tunnel
Since commit
cb9f1b783850, scapy (which uses an AF_PACKET socket in
SOCK_RAW mode) is unable to send a basic icmp packet over a sit tunnel:
Here is a example of the setup:
$ ip link set ntfp2 up
$ ip addr add 10.125.0.1/24 dev ntfp2
$ ip tunnel add tun1 mode sit ttl 64 local 10.125.0.1 remote 10.125.0.2 dev ntfp2
$ ip addr add fd00:cafe:cafe::1/128 dev tun1
$ ip link set dev tun1 up
$ ip route add fd00:200::/64 dev tun1
$ scapy
>>> p = []
>>> p += IPv6(src='fd00:100::1', dst='fd00:200::1')/ICMPv6EchoRequest()
>>> send(p, count=1, inter=0.1)
>>> quit()
$ ip -s link ls dev tun1 | grep -A1 "TX.*errors"
TX: bytes packets errors dropped carrier collsns
0 0 1 0 0 0
The problem is that the network offset is set to the hard_header_len of the
output device (tun1, ie 14 + 20) and in our case, because the packet is
small (48 bytes) the pskb_inet_may_pull() fails (it tries to pull 40 bytes
(ipv6 header) starting from the network offset).
This problem is more generally related to device with variable hard header
length. To avoid a too intrusive patch in the current release, a (ugly)
workaround is proposed in this patch. It has to be cleaned up in net-next.
Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=993675a3100b1
Link: http://patchwork.ozlabs.org/patch/1024489/
Fixes:
cb9f1b783850 ("ip: validate header length on virtual device xmit")
CC: Willem de Bruijn <willemb@google.com>
CC: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuchung Cheng [Thu, 17 Jan 2019 16:51:01 +0000 (08:51 -0800)]
bpf: fix SO_MAX_PACING_RATE to support TCP internal pacing
If sch_fq packet scheduler is not used, TCP can fallback to
internal pacing, but this requires sk_pacing_status to
be properly set.
Fixes:
8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Peter Oskolkov [Wed, 16 Jan 2019 16:47:54 +0000 (08:47 -0800)]
bpf: bpf_setsockopt: reset sock dst on SO_MARK changes
In sock_setsockopt() (net/core/sock.h), when SO_MARK option is used
to change sk_mark, sk_dst_reset(sk) is called. The same should be
done in bpf_setsockopt().
Fixes:
8c4b4c7e9ff0 ("bpf: Add setsockopt helper function to bpf")
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Alexey Kodanev [Wed, 16 Jan 2019 16:17:45 +0000 (19:17 +0300)]
udp6: add missing rehash callback to udplite
After commit
23b0269e58ae ("net: udp6: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.
This is related to the problem addressed in the commit
719f835853a9
("udp: add rehash on connect()"). Moreover, __udp6_lib_lookup() now
looks for a socket immediately in the secondary hash table.
And this issue was found with LTP/network tests as well.
Fixes:
23b0269e58ae ("net: udp6: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Alexey Kodanev [Wed, 16 Jan 2019 16:17:44 +0000 (19:17 +0300)]
udp: add missing rehash callback to udplite
After commit
4cdeeee9252a ("net: udp: prefer listeners bound to an
address"), UDP-Lite only works when specifying a local address for
the sockets.
This is related to the problem addressed in the commit
719f835853a9
("udp: add rehash on connect()"). Moreover, __udp4_lib_lookup() now
looks for a socket immediately in the secondary hash table.
The issue was found with LTP/network tests (UDP-Lite test-cases).
Fixes:
4cdeeee9252a ("net: udp: prefer listeners bound to an address")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ivan Vecera [Wed, 16 Jan 2019 15:53:52 +0000 (16:53 +0100)]
net/sched: cls_flower: allocate mask dynamically in fl_change()
Recent changes (especially
05cd271fd61a ("cls_flower: Support multiple
masks per priority")) in the fl_flow_mask structure grow it and its
current size e.g. on x86_64 with defconfig is 760 bytes and more than
1024 bytes with some debug options enabled. Prior the mentioned commit
its size was 176 bytes (using defconfig on x86_64).
With regard to this fact it's reasonable to allocate this structure
dynamically in fl_change() to reduce its stack size.
v2:
- use kzalloc() instead of kcalloc()
Fixes:
05cd271fd61a ("cls_flower: Support multiple masks per priority")
Cc: Jiri Pirko <jiri@resnulli.us>
Cc: Paul Blakey <paulb@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 16 Jan 2019 10:27:08 +0000 (11:27 +0100)]
net: dsa: realtek-smi: fix OF child-node lookup
Use the new of_get_compatible_child() helper to look up child nodes to
avoid ever matching non-child nodes elsewhere in the tree.
Also fix up the related struct device_node leaks.
Fixes:
d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver")
Cc: stable <stable@vger.kernel.org> # 4.19: 36156f9241cb0
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Tue, 15 Jan 2019 18:03:38 +0000 (18:03 +0000)]
atm: he: fix sign-extension overflow on large shift
Shifting the 1 by exp by an int can lead to sign-extension overlow when
exp is 31 since 1 is an signed int and sign-extending this result to an
unsigned long long will set the upper 32 bits. Fix this by shifting an
unsigned long.
Detected by cppcheck:
(warning) Shifting signed 32-bit value by 31 bits is undefined behaviour
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mathieu Malaterre [Wed, 16 Jan 2019 19:35:41 +0000 (20:35 +0100)]
bpf: Correctly annotate implicit fall through in bpf_base_func_proto
There is a plan to build the kernel with -Wimplicit-fallthrough and
this place in the code produced a warnings (W=1).
To preserve as much of the existing comment only change a ‘:’ into a ‘,’.
This is enough change, to match the regular expression expected by GCC.
This commit removes the following warning:
net/core/filter.c:5310:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mathieu Malaterre [Wed, 16 Jan 2019 19:35:29 +0000 (20:35 +0100)]
bpf: Annotate implicit fall through in cgroup_dev_func_proto
There is a plan to build the kernel with -Wimplicit-fallthrough
and this place in the code produced a warnings (W=1).
This commit removes the following warning:
kernel/bpf/cgroup.c:719:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Mathieu Malaterre [Wed, 16 Jan 2019 19:29:40 +0000 (20:29 +0100)]
bpf: Make function btf_name_offset_valid static
Initially in commit
69b693f0aefa ("bpf: btf: Introduce BPF Type Format
(BTF)") the function 'btf_name_offset_valid' was introduced as static
function it was later on changed to a non-static one, and then finally
in commit
23127b33ec80 ("bpf: Create a new btf_name_by_offset() for
non type name use case") the function prototype was removed.
Revert back to original implementation and make the function static.
Remove warning triggered with W=1:
kernel/bpf/btf.c:470:6: warning: no previous prototype for 'btf_name_offset_valid' [-Wmissing-prototypes]
Fixes:
23127b33ec80 ("bpf: Create a new btf_name_by_offset() for non type name use case")
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Wed, 16 Jan 2019 22:03:17 +0000 (14:03 -0800)]
selftests/bpf: retry tests that expect build-id
While running test_progs in a loop I found out that I'm sometimes hitting
"Didn't find expected build ID from the map" error.
Looking at stack_map_get_build_id_offset() it seems that it is racy (by
design) and can sometimes return BPF_STACK_BUILD_ID_IP (i.e. can't trylock
current->mm->mmap_sem).
Let's retry this test a single time.
Fixes:
13790d1cc72c ("bpf: add selftest for stackmap with build_id in NMI context")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Wed, 16 Jan 2019 22:03:16 +0000 (14:03 -0800)]
bpf: zero out build_id for BPF_STACK_BUILD_ID_IP
When returning BPF_STACK_BUILD_ID_IP from stack_map_get_build_id_offset,
make sure that build_id field is empty. Since we are using percpu
free list, there is a possibility that we might reuse some previous
bpf_stack_build_id with non-zero build_id.
Fixes:
615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Wed, 16 Jan 2019 22:03:15 +0000 (14:03 -0800)]
bpf: don't assume build-id length is always 20 bytes
Build-id length is not fixed to 20, it can be (`man ld` /--build-id):
* 128-bit (uuid)
* 160-bit (sha1)
* any length specified in ld --build-id=0xhexstring
To fix the issue of missing BPF_STACK_BUILD_ID_VALID for shorter build-ids,
assume that build-id is somewhere in the range of 1 .. 20.
Set the remaining bytes to zero.
v2:
* don't introduce new "len = min(BPF_BUILD_ID_SIZE, nhdr->n_descsz)",
we already know that nhdr->n_descsz <= BPF_BUILD_ID_SIZE if we enter
this 'if' condition
Fixes:
615755a77b24 ("bpf: extend stackmap to save binary_build_id+offset instead of address")
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Willem de Bruijn [Tue, 15 Jan 2019 16:40:02 +0000 (11:40 -0500)]
udp: with udp_segment release on error path
Failure __ip_append_data triggers udp_flush_pending_frames, but these
tests happen later. The skb must be freed directly.
Fixes:
bec1f6f697362 ("udp: generate gso with UDP_SEGMENT")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Taehee Yoo [Tue, 15 Jan 2019 16:35:22 +0000 (01:35 +0900)]
net: bpfilter: change section name of bpfilter UMH blob.
The section of bpfilter UMH blob is the ".bpfilter_umh". but this is not
an explicit section. so linking warning occurred at compile time for the
powerpc.
So, this patch makes use of the ".rodata" instead of the ".bpfilter_umh".
Config condition:
CONFIG_BPFILTER=y
CONFIG_BPFILTER_UMH=y
Result:
ld: warning: orphan section `.bpfilter_umh' from
`net/bpfilter/bpfilter_umh_blob.o' being placed in section `.bpfilter_umh'
Fixes:
61fbf5933d42 ("net: bpfilter: restart bpfilter_umh when error occurred")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Tue, 15 Jan 2019 15:55:30 +0000 (16:55 +0100)]
net: phy: Add missing features to PHY drivers
The bcm87xx and micrel driver has PHYs which are missing the .features
value. Add them. The bcm87xx is a 10G FEC only PHY. Add the needed
features definition of this PHY.
Fixes:
719655a14971 ("net: phy: Replace phy driver features u32 with link_mode bitmap")
Reported-by: Scott Wood <oss@buserror.net>
Reported-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Mon, 14 Jan 2019 18:52:45 +0000 (10:52 -0800)]
ipv6: route: place a warning with duplicated string with correct extack
"IPv6: " prefix is already added by pr_fmt, no need to include
it again in the pr_warn() format. The message predates extack
support, we can replace the whole thing with an extack message.
Suggested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Mon, 14 Jan 2019 17:16:44 +0000 (18:16 +0100)]
selftests: tc-testing: fix parsing of ife type
In iproute2 commit
90c5c969f0b9 ("fix print_0xhex on 32 bit"), the format
specifier for the ife type changed from 0x%X to %#llX, causing systematic
failures in the following TDC test cases:
7682 - Create valid ife encode action with mark and pass control
ef47 - Create valid ife encode action with mark and pipe control
df43 - Create valid ife encode action with mark and continue control
e4cf - Create valid ife encode action with mark and drop control
ccba - Create valid ife encode action with mark and reclassify control
a1cf - Create valid ife encode action with mark and jump control
cb3d - Create valid ife encode action with mark value at 32-bit maximum
95ed - Create valid ife encode action with prio and pass control
aa17 - Create valid ife encode action with prio and pipe control
74c7 - Create valid ife encode action with prio and continue control
7a97 - Create valid ife encode action with prio and drop control
f66b - Create valid ife encode action with prio and reclassify control
3056 - Create valid ife encode action with prio and jump control
7dd3 - Create valid ife encode action with prio value at 32-bit maximum
05bb - Create valid ife encode action with tcindex and pass control
ce65 - Create valid ife encode action with tcindex and pipe control
09cd - Create valid ife encode action with tcindex and continue control
8eb5 - Create valid ife encode action with tcindex and continue control
451a - Create valid ife encode action with tcindex and drop control
d76c - Create valid ife encode action with tcindex and reclassify control
e731 - Create valid ife encode action with tcindex and jump control
b7b8 - Create valid ife encode action with tcindex value at 16-bit maximum
2a9c - Create valid ife encode action with mac src parameter
cf5c - Create valid ife encode action with mac dst parameter
2353 - Create valid ife encode action with mac src and mac dst parameters
552c - Create valid ife encode action with mark and type parameters
0421 - Create valid ife encode action with prio and type parameters
4017 - Create valid ife encode action with tcindex and type parameters
fac3 - Create valid ife encode action with index at 32-bit maximnum
7c25 - Create valid ife decode action with pass control
dccb - Create valid ife decode action with pipe control
7bb9 - Create valid ife decode action with continue control
d9ad - Create valid ife decode action with drop control
219f - Create valid ife decode action with reclassify control
8f44 - Create valid ife decode action with jump control
b330 - Create ife encode action with cookie
Change 'matchPattern' values, allowing '0' and '0x0' if ife type is equal
to 0, and accepting both '0x' and '0X' otherwise, to let these tests pass
both with old and new tc binaries.
While at it, fix a small typo in test case fac3 ('maximnum'->'maximum').
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Mon, 14 Jan 2019 10:38:43 +0000 (13:38 +0300)]
net/core/neighbour: fix kmemleak minimal reference count for hash tables
This should be 1 for normal allocations, 0 disables leak reporting.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reported-by: Cong Wang <xiyou.wangcong@gmail.com>
Fixes:
85704cb8dcfd ("net/core/neighbour: tell kmemleak about hash tables")
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 14 Jan 2019 10:34:02 +0000 (18:34 +0800)]
sctp: allocate sctp_sockaddr_entry with kzalloc
The similar issue as fixed in Commit
4a2eb0c37b47 ("sctp: initialize
sin6_flowinfo for ipv6 addrs in sctp_inet6addr_event") also exists
in sctp_inetaddr_event, as Alexander noticed.
To fix it, allocate sctp_sockaddr_entry with kzalloc for both sctp
ipv4 and ipv6 addresses, as does in sctp_v4/6_copy_addrlist().
Reported-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reported-by: syzbot+ae0c70c0c2d40c51bb92@syzkaller.appspotmail.com
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Mon, 14 Jan 2019 10:10:06 +0000 (18:10 +0800)]
erspan: build the header with the right proto according to erspan_ver
As said in draft-foschiano-erspan-03#section4:
Different frame variants known as "ERSPAN Types" can be
distinguished based on the GRE "Protocol Type" field value: Type I
and II's value is 0x88BE while Type III's is 0x22EB [ETYPES].
So set it properly in erspan_xmit() according to erspan_ver. While at
it, also remove the unused parameter 'proto' in erspan_fb_xmit().
Fixes:
94d7d8f29287 ("ip6_gre: add erspan v2 support")
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ross Lagerwall [Mon, 14 Jan 2019 09:16:56 +0000 (09:16 +0000)]
openvswitch: Avoid OOB read when parsing flow nlattrs
For nested and variable attributes, the expected length of an attribute
is not known and marked by a negative number. This results in an OOB
read when the expected length is later used to check if the attribute is
all zeros. Fix this by using the actual length of the attribute rather
than the expected length.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry Bezrukov [Mon, 14 Jan 2019 08:14:41 +0000 (08:14 +0000)]
net: usb: aqc111: Extend HWID table by TRENDnet device
New device of TRENDnet based on aqc111u
Add this ID to blacklist of cdc_ether driver as well
Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cong Wang [Sat, 12 Jan 2019 02:55:42 +0000 (18:55 -0800)]
net_sched: refetch skb protocol for each filter
Martin reported a set of filters don't work after changing
from reclassify to continue. Looking into the code, it
looks like skb protocol is not always fetched for each
iteration of the filters. But, as demonstrated by Martin,
TC actions could modify skb->protocol, for example act_vlan,
this means we have to refetch skb protocol in each iteration,
rather than using the one we fetch in the beginning of the loop.
This bug is _not_ introduced by commit
3b3ae880266d
("net: sched: consolidate tc_classify{,_compat}"), technically,
if act_vlan is the only action that modifies skb protocol, then
it is commit
c7e2b9689ef8 ("sched: introduce vlan action") which
introduced this bug.
Reported-by: Martin Olsson <martin.olsson+netdev@sentorsecurity.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Timotej Lazar [Sun, 13 Jan 2019 00:22:55 +0000 (01:22 +0100)]
net: phy: meson-gxl: Use the genphy_soft_reset callback
Since the referenced commit, Ethernet fails to come up at boot on the
board meson-gxl-s905x-libretech-cc. Fix this by re-enabling the
genphy_soft_reset callback for the Amlogic Meson GXL PHY driver.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Signed-off-by: Timotej Lazar <timotej.lazar@araneo.si>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
yupeng [Fri, 11 Jan 2019 23:07:24 +0000 (15:07 -0800)]
net: add document for several snmp counters
add document for below counters:
TcpEstabResets
TcpAttemptFails
TcpOutRsts
TcpExtTCPSACKDiscard
TcpExtTCPDSACKIgnoredOld
TcpExtTCPDSACKIgnoredNoUndo
TcpExtTCPSackShifted
TcpExtTCPSackMerged
TcpExtTCPSackShiftFallback
TcpExtTCPWantZeroWindowAdv
TcpExtTCPToZeroWindowAdv
TcpExtTCPFromZeroWindowAdv
TcpExtDelayedACKs
TcpExtDelayedACKLocked
TcpExtDelayedACKLost
TcpExtTCPLossProbes
TcpExtTCPLossProbeRecovery
Signed-off-by: yupeng <yupeng0921@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 11 Jan 2019 14:27:35 +0000 (06:27 -0800)]
fou, fou6: do not assume linear skbs
Both gue_err() and gue6_err() incorrectly assume
linear skbs. Fix them to use pskb_may_pull().
BUG: KMSAN: uninit-value in gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
CPU: 0 PID: 18083 Comm: syz-executor1 Not tainted 5.0.0-rc1+ #7
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:600
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
gue6_err+0x475/0xc40 net/ipv6/fou6.c:101
__udp6_lib_err_encap_no_sk net/ipv6/udp.c:434 [inline]
__udp6_lib_err_encap net/ipv6/udp.c:491 [inline]
__udp6_lib_err+0x18d0/0x2590 net/ipv6/udp.c:522
udplitev6_err+0x118/0x130 net/ipv6/udplite.c:27
icmpv6_notify+0x462/0x9f0 net/ipv6/icmp.c:784
icmpv6_rcv+0x18ac/0x3fa0 net/ipv6/icmp.c:872
ip6_protocol_deliver_rcu+0xb5a/0x23a0 net/ipv6/ip6_input.c:394
ip6_input_finish net/ipv6/ip6_input.c:434 [inline]
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0x2b6/0x350 net/ipv6/ip6_input.c:443
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x4e7/0x6d0 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x34b/0x3f0 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core net/core/dev.c:4973 [inline]
__netif_receive_skb net/core/dev.c:5083 [inline]
process_backlog+0x756/0x10e0 net/core/dev.c:5923
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x78b/0x1a60 net/core/dev.c:6412
__do_softirq+0x53f/0x93a kernel/softirq.c:293
do_softirq_own_stack+0x49/0x80 arch/x86/entry/entry_64.S:1039
</IRQ>
do_softirq kernel/softirq.c:338 [inline]
__local_bh_enable_ip+0x16f/0x1a0 kernel/softirq.c:190
local_bh_enable+0x36/0x40 include/linux/bottom_half.h:32
rcu_read_unlock_bh include/linux/rcupdate.h:696 [inline]
ip6_finish_output2+0x1d64/0x25f0 net/ipv6/ip6_output.c:121
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmmsg+0x580/0xad0 net/socket.c:2211
__do_sys_sendmmsg net/socket.c:2240 [inline]
__se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
__x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f4a5204fc78 EFLAGS:
00000246 ORIG_RAX:
0000000000000133
RAX:
ffffffffffffffda RBX:
0000000000000004 RCX:
0000000000457ec9
RDX:
00000000040001ab RSI:
0000000020000240 RDI:
0000000000000003
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f4a520506d4
R13:
00000000004c4ce5 R14:
00000000004d85d8 R15:
00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:205 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:159
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2754 [inline]
__kmalloc_node_track_caller+0xe9e/0xff0 mm/slub.c:4377
__kmalloc_reserve net/core/skbuff.c:140 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:208
alloc_skb include/linux/skbuff.h:1012 [inline]
alloc_skb_with_frags+0x1c7/0xac0 net/core/skbuff.c:5288
sock_alloc_send_pskb+0xafd/0x10a0 net/core/sock.c:2091
sock_alloc_send_skb+0xca/0xe0 net/core/sock.c:2108
__ip6_append_data+0x42ed/0x5dc0 net/ipv6/ip6_output.c:1443
ip6_append_data+0x3c2/0x650 net/ipv6/ip6_output.c:1619
icmp6_send+0x2f5c/0x3c40 net/ipv6/icmp.c:574
icmpv6_send+0xe5/0x110 net/ipv6/ip6_icmp.c:43
ip6_link_failure+0x5c/0x2c0 net/ipv6/route.c:2231
dst_link_failure include/net/dst.h:427 [inline]
vti_xmit net/ipv4/ip_vti.c:229 [inline]
vti_tunnel_xmit+0xf3b/0x1ea0 net/ipv4/ip_vti.c:265
__netdev_start_xmit include/linux/netdevice.h:4382 [inline]
netdev_start_xmit include/linux/netdevice.h:4391 [inline]
xmit_one net/core/dev.c:3278 [inline]
dev_hard_start_xmit+0x604/0xc40 net/core/dev.c:3294
__dev_queue_xmit+0x2e48/0x3b80 net/core/dev.c:3864
dev_queue_xmit+0x4b/0x60 net/core/dev.c:3897
neigh_direct_output+0x42/0x50 net/core/neighbour.c:1511
neigh_output include/net/neighbour.h:508 [inline]
ip6_finish_output2+0x1d4e/0x25f0 net/ipv6/ip6_output.c:120
ip6_finish_output+0xae4/0xbc0 net/ipv6/ip6_output.c:154
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x5ca/0x710 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0x164/0x1d0 net/ipv6/output_core.c:176
ip6_send_skb+0xfa/0x390 net/ipv6/ip6_output.c:1727
udp_v6_send_skb+0x1733/0x1d20 net/ipv6/udp.c:1169
udpv6_sendmsg+0x424e/0x45d0 net/ipv6/udp.c:1466
inet_sendmsg+0x54a/0x720 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmmsg+0x580/0xad0 net/socket.c:2211
__do_sys_sendmmsg net/socket.c:2240 [inline]
__se_sys_sendmmsg+0xbd/0xe0 net/socket.c:2237
__x64_sys_sendmmsg+0x56/0x70 net/socket.c:2237
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
Fixes:
b8a51b38e4d4 ("fou, fou6: ICMP error handlers for FoU and GUE")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stefano Brivio <sbrivio@redhat.com>
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 11 Jan 2019 14:08:23 +0000 (15:08 +0100)]
selftests: tc-testing: fix tunnel_key failure if dst_port is unspecified
After commit
1c25324caf82 ("net/sched: act_tunnel_key: Don't dump dst port
if it wasn't set"), act_tunnel_key doesn't dump anymore the destination
port, unless it was explicitly configured. This caused systematic failures
in the following TDC test case:
7a88 - Add tunnel_key action with cookie parameter
Avoid matching zero values of TCA_TUNNEL_KEY_ENC_DST_PORT to let the test
pass again.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Fri, 11 Jan 2019 10:49:58 +0000 (11:49 +0100)]
selftests: tc-testing: drop test on missing tunnel key id
After merge of commit
80ef0f22ceda ("net/sched: act_tunnel_key: Allow
key-less tunnels"), act_tunnel_key does not reject anymore requests to
install 'set' rules where the key id is missing. Therefore, drop the
following TDC testcase:
ba4e - Add tunnel_key set action with missing mandatory id parameter
because it's going to become a systematic fail as soon as userspace
iproute2 will start supporting key-less tunnels.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 10 Jan 2019 23:15:21 +0000 (00:15 +0100)]
net: phy: marvell: Fix deadlock from wrong locking
m88e1318_set_wol() takes the lock as part of phy_select_page(). Don't
take the lock again with phy_read(), use the unlocked __phy_read().
Fixes:
424ca4c55121 ("net: phy: marvell: fix paged access races")
Reported-by: Åke Rehnman <ake.rehnman@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 10 Jan 2019 21:48:36 +0000 (22:48 +0100)]
net: phy: marvell: Errata for mv88e6390 internal PHYs
The VOD can be out of spec, unless some magic value is poked into an
undocumented register in an undocumented page.
Fixes:
e4cf8a38fc0d ("net: phy: Marvell: Add mv88e6390 internal PHY")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Greg Kroah-Hartman [Thu, 10 Jan 2019 20:24:13 +0000 (21:24 +0100)]
IN_BADCLASS: fix macro to actually work
Commit
65cab850f0ee ("net: Allow class-e address assignment via ifconfig
ioctl") modified the IN_BADCLASS macro a bit, but unfortunatly one too
many '(' characters were added to the line, making any code that used
it, not build properly.
Also, the macro now compares an unsigned with a signed value, which
isn't ok, so fix that up by making both types match properly.
Reported-by: Christopher Ferris <cferris@google.com>
Fixes:
65cab850f0ee ("net: Allow class-e address assignment via ifconfig ioctl")
Cc: Dave Taht <dave.taht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Willem de Bruijn [Thu, 10 Jan 2019 19:40:33 +0000 (14:40 -0500)]
tcp: allow MSG_ZEROCOPY transmission also in CLOSE_WAIT state
TCP transmission with MSG_ZEROCOPY fails if the peer closes its end of
the connection and so transitions this socket to CLOSE_WAIT state.
Transmission in close wait state is acceptable. Other similar tests in
the stack (e.g., in FastOpen) accept both states. Relax this test, too.
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg276886.html
Link: https://www.mail-archive.com/netdev@vger.kernel.org/msg227390.html
Fixes:
f214f915e7db ("tcp: enable MSG_ZEROCOPY")
Reported-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
CC: Yuchung Cheng <ycheng@google.com>
CC: Neal Cardwell <ncardwell@google.com>
CC: Soheil Hassas Yeganeh <soheil@google.com>
CC: Alexey Kodanev <alexey.kodanev@oracle.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Thu, 10 Jan 2019 19:22:26 +0000 (20:22 +0100)]
net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ9031
So far genphy_soft_reset was used automatically if the PHY driver
didn't implement the soft_reset callback. This changed with the
mentioned commit and broke KSZ9031. To fix this configure the
KSZ9031 PHY driver to use genphy_soft_reset.
Fixes:
6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Reported-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Davide Caratti [Thu, 10 Jan 2019 19:21:02 +0000 (20:21 +0100)]
net/sched: act_tunnel_key: fix memory leak in case of action replace
running the following TDC test cases:
7afc - Replace tunnel_key set action with all parameters
364d - Replace tunnel_key set action with all parameters and cookie
it's possible to trigger kmemleak warnings like:
unreferenced object 0xffff94797127ab40 (size 192):
comm "tc", pid 3248, jiffies
4300565293 (age 1006.862s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 c0 93 f9 8a ff ff ff ff ................
41 84 ee 89 ff ff ff ff 00 00 00 00 00 00 00 00 A...............
backtrace:
[<
000000001e85b61c>] tunnel_key_init+0x31d/0x820 [act_tunnel_key]
[<
000000007f3f6ee7>] tcf_action_init_1+0x384/0x4c0
[<
00000000e89e3ded>] tcf_action_init+0x12b/0x1a0
[<
00000000c1c8c0f8>] tcf_action_add+0x73/0x170
[<
0000000095a9fc28>] tc_ctl_action+0x122/0x160
[<
000000004bebeac5>] rtnetlink_rcv_msg+0x263/0x2d0
[<
000000009fd862dd>] netlink_rcv_skb+0x4a/0x110
[<
00000000b55199e7>] netlink_unicast+0x1a0/0x250
[<
000000004996cd21>] netlink_sendmsg+0x2c1/0x3c0
[<
000000004d6a94b4>] sock_sendmsg+0x36/0x40
[<
000000005d9f0208>] ___sys_sendmsg+0x280/0x2f0
[<
00000000dec19023>] __sys_sendmsg+0x5e/0xa0
[<
000000004b82ac81>] do_syscall_64+0x5b/0x180
[<
00000000a0f1209a>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[<
000000002926b2ab>] 0xffffffffffffffff
when the tunnel_key action is replaced, the kernel forgets to release the
dst metadata: ensure they are released by tunnel_key_init(), the same way
it's done in tunnel_key_release().
Fixes:
d0f6dd8a914f4 ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David Howells [Thu, 10 Jan 2019 16:59:13 +0000 (16:59 +0000)]
Revert "rxrpc: Allow failed client calls to be retried"
The changes introduced to allow rxrpc calls to be retried creates an issue
when it comes to refcounting afs_call structs. The problem is that when
rxrpc_send_data() queues the last packet for an asynchronous call, the
following sequence can occur:
(1) The notify_end_tx callback is invoked which causes the state in the
afs_call to be changed from AFS_CALL_CL_REQUESTING or
AFS_CALL_SV_REPLYING.
(2) afs_deliver_to_call() can then process event notifications from rxrpc
on the async_work queue.
(3) Delivery of events, such as an abort from the server, can cause the
afs_call state to be changed to AFS_CALL_COMPLETE on async_work.
(4) For an asynchronous call, afs_process_async_call() notes that the call
is complete and tried to clean up all the refs on async_work.
(5) rxrpc_send_data() might return the amount of data transferred
(success) or an error - which could in turn reflect a local error or a
received error.
Synchronising the clean up after rxrpc_kernel_send_data() returns an error
with the asynchronous cleanup is then tricky to get right.
Mostly revert commit
c038a58ccfd6704d4d7d60ed3d6a0fca13cf13a4. The two API
functions the original commit added aren't currently used. This makes
rxrpc_kernel_send_data() always return successfully if it queued the data
it was given.
Note that this doesn't affect synchronous calls since their Rx notification
function merely pokes a wait queue and does not refcounting. The
asynchronous call notification function *has* to do refcounting and pass a
ref over the work item to avoid the need to sync the workqueue in call
cleanup.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 16 Jan 2019 04:29:21 +0000 (20:29 -0800)]
Merge branch 'tipc-uninit-values'
Ying Xue says:
====================
tipc: fix uninit-value issues reported by syzbot
Recently, syzbot complained that TIPC module exits several issues
associated with uninit-value type. So, in this series, we try to
fix them as many as possible.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:29 +0000 (17:22 +0800)]
tipc: fix uninit-value in tipc_nl_compat_doit
BUG: KMSAN: uninit-value in tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
CPU: 0 PID: 4514 Comm: syz-executor485 Not tainted 4.16.0+ #87
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_nl_compat_doit+0x404/0xa10 net/tipc/netlink_compat.c:335
tipc_nl_compat_recv+0x164b/0x2700 net/tipc/netlink_compat.c:1153
genl_family_rcv_msg net/netlink/genetlink.c:599 [inline]
genl_rcv_msg+0x1686/0x1810 net/netlink/genetlink.c:624
netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2447
genl_rcv+0x63/0x80 net/netlink/genetlink.c:635
netlink_unicast_kernel net/netlink/af_netlink.c:1311 [inline]
netlink_unicast+0x166b/0x1740 net/netlink/af_netlink.c:1337
netlink_sendmsg+0x1048/0x1310 net/netlink/af_netlink.c:1900
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fda9
RSP: 002b:
00007ffd0c184ba8 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
000000000043fda9
RDX:
0000000000000000 RSI:
0000000020023000 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
00000000004002c8 R09:
00000000004002c8
R10:
00000000004002c8 R11:
0000000000000213 R12:
00000000004016d0
R13:
0000000000401760 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmsan_slab_alloc+0x11/0x20 mm/kmsan/kmsan.c:321
slab_post_alloc_hook mm/slab.h:445 [inline]
slab_alloc_node mm/slub.c:2737 [inline]
__kmalloc_node_track_caller+0xaed/0x11c0 mm/slub.c:4369
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x2cf/0x9f0 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:984 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1183 [inline]
netlink_sendmsg+0x9a6/0x1310 net/netlink/af_netlink.c:1875
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
In tipc_nl_compat_recv(), when the len variable returned by
nlmsg_attrlen() is 0, the message is still treated as a valid one,
which is obviously unresonable. When len is zero, it means the
message not only doesn't contain any valid TLV payload, but also
TLV header is not included. Under this stituation, tlv_type field
in TLV header is still accessed in tipc_nl_compat_dumpit() or
tipc_nl_compat_doit(), but the field space is obviously illegal.
Of course, it is not initialized.
Reported-by: syzbot+bca0dc46634781f08b38@syzkaller.appspotmail.com
Reported-by: syzbot+6bdb590321a7ae40c1a6@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:28 +0000 (17:22 +0800)]
tipc: fix uninit-value in tipc_nl_compat_name_table_dump
syzbot reported:
BUG: KMSAN: uninit-value in __arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
BUG: KMSAN: uninit-value in __fswab32 include/uapi/linux/swab.h:59 [inline]
BUG: KMSAN: uninit-value in tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
CPU: 0 PID: 6290 Comm: syz-executor848 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x306/0x460 lib/dump_stack.c:113
kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
__msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
__arch_swab32 arch/x86/include/uapi/asm/swab.h:10 [inline]
__fswab32 include/uapi/linux/swab.h:59 [inline]
tipc_nl_compat_name_table_dump+0x4a8/0xba0 net/tipc/netlink_compat.c:826
__tipc_nl_compat_dumpit+0x59e/0xdb0 net/tipc/netlink_compat.c:205
tipc_nl_compat_dumpit+0x63a/0x820 net/tipc/netlink_compat.c:270
tipc_nl_compat_handle net/tipc/netlink_compat.c:1151 [inline]
tipc_nl_compat_recv+0x1402/0x2760 net/tipc/netlink_compat.c:1210
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007ffecec49318 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
0000000000440179
RDX:
0000000000000000 RSI:
0000000020000100 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
0000000000000000 R09:
00000000004002c8
R10:
0000000000000000 R11:
0000000000000213 R12:
0000000000401a00
R13:
0000000000401a90 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2727 [inline]
__kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x422/0xe90 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
We cannot take for granted the thing that the length of data contained
in TLV is longer than the size of struct tipc_name_table_query in
tipc_nl_compat_name_table_dump().
Reported-by: syzbot+06e771a754829716a327@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:27 +0000 (17:22 +0800)]
tipc: fix uninit-value in tipc_nl_compat_link_set
syzbot reports following splat:
BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486
CPU: 1 PID: 9306 Comm: syz-executor172 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313
strlen+0x3b/0xa0 lib/string.c:486
nla_put_string include/net/netlink.h:1154 [inline]
__tipc_nl_compat_link_set net/tipc/netlink_compat.c:708 [inline]
tipc_nl_compat_link_set+0x929/0x1220 net/tipc/netlink_compat.c:744
__tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344
tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline]
tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
The uninitialised access happened in
nla_put_string(skb, TIPC_NLA_LINK_NAME, lc->name)
This is because lc->name string is not validated before it's used.
Reported-by: syzbot+d78b8a29241a195aefb8@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:26 +0000 (17:22 +0800)]
tipc: fix uninit-value in tipc_nl_compat_bearer_enable
syzbot reported:
BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:484
CPU: 1 PID: 6371 Comm: syz-executor652 Not tainted 4.19.0-rc8+ #70
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x306/0x460 lib/dump_stack.c:113
kmsan_report+0x1a2/0x2e0 mm/kmsan/kmsan.c:917
__msan_warning+0x7c/0xe0 mm/kmsan/kmsan_instr.c:500
strlen+0x3b/0xa0 lib/string.c:484
nla_put_string include/net/netlink.h:1011 [inline]
tipc_nl_compat_bearer_enable+0x238/0x7b0 net/tipc/netlink_compat.c:389
__tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
tipc_nl_compat_doit+0x39f/0xae0 net/tipc/netlink_compat.c:344
tipc_nl_compat_recv+0x147c/0x2760 net/tipc/netlink_compat.c:1107
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185c/0x1a20 net/netlink/genetlink.c:626
netlink_rcv_skb+0x394/0x640 net/netlink/af_netlink.c:2454
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x166d/0x1720 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x1391/0x1420 net/netlink/af_netlink.c:1908
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x440179
Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 fb 13 fc ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007fffef7beee8 EFLAGS:
00000213 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
00000000004002c8 RCX:
0000000000440179
RDX:
0000000000000000 RSI:
0000000020000100 RDI:
0000000000000003
RBP:
00000000006ca018 R08:
0000000000000000 R09:
00000000004002c8
R10:
0000000000000000 R11:
0000000000000213 R12:
0000000000401a00
R13:
0000000000401a90 R14:
0000000000000000 R15:
0000000000000000
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:255 [inline]
kmsan_internal_poison_shadow+0xc8/0x1d0 mm/kmsan/kmsan.c:180
kmsan_kmalloc+0xa4/0x120 mm/kmsan/kmsan_hooks.c:104
kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan_hooks.c:113
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2727 [inline]
__kmalloc_node_track_caller+0xb43/0x1400 mm/slub.c:4360
__kmalloc_reserve net/core/skbuff.c:138 [inline]
__alloc_skb+0x422/0xe90 net/core/skbuff.c:206
alloc_skb include/linux/skbuff.h:996 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1189 [inline]
netlink_sendmsg+0xcaf/0x1420 net/netlink/af_netlink.c:1883
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xe47/0x1200 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x307/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbe/0x100 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
The root cause is that we don't validate whether bear name is a valid
string in tipc_nl_compat_bearer_enable().
Meanwhile, we also fix the same issue in the following functions:
tipc_nl_compat_bearer_disable()
tipc_nl_compat_link_stat_dump()
tipc_nl_compat_media_set()
tipc_nl_compat_bearer_set()
Reported-by: syzbot+b33d5cae0efd35dbfe77@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:25 +0000 (17:22 +0800)]
tipc: fix uninit-value in tipc_nl_compat_link_reset_stats
syzbot reports following splat:
BUG: KMSAN: uninit-value in strlen+0x3b/0xa0 lib/string.c:486
CPU: 1 PID: 11057 Comm: syz-executor0 Not tainted 4.20.0-rc7+ #2
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x173/0x1d0 lib/dump_stack.c:113
kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613
__msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:295
strlen+0x3b/0xa0 lib/string.c:486
nla_put_string include/net/netlink.h:1154 [inline]
tipc_nl_compat_link_reset_stats+0x1f0/0x360 net/tipc/netlink_compat.c:760
__tipc_nl_compat_doit net/tipc/netlink_compat.c:311 [inline]
tipc_nl_compat_doit+0x3aa/0xaf0 net/tipc/netlink_compat.c:344
tipc_nl_compat_handle net/tipc/netlink_compat.c:1107 [inline]
tipc_nl_compat_recv+0x14d7/0x2760 net/tipc/netlink_compat.c:1210
genl_family_rcv_msg net/netlink/genetlink.c:601 [inline]
genl_rcv_msg+0x185f/0x1a60 net/netlink/genetlink.c:626
netlink_rcv_skb+0x444/0x640 net/netlink/af_netlink.c:2477
genl_rcv+0x63/0x80 net/netlink/genetlink.c:637
netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline]
netlink_unicast+0xf40/0x1020 net/netlink/af_netlink.c:1336
netlink_sendmsg+0x127f/0x1300 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
RIP: 0033:0x457ec9
Code: 6d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 3b b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:
00007f2557338c78 EFLAGS:
00000246 ORIG_RAX:
000000000000002e
RAX:
ffffffffffffffda RBX:
0000000000000003 RCX:
0000000000457ec9
RDX:
0000000000000000 RSI:
00000000200001c0 RDI:
0000000000000003
RBP:
000000000073bf00 R08:
0000000000000000 R09:
0000000000000000
R10:
0000000000000000 R11:
0000000000000246 R12:
00007f25573396d4
R13:
00000000004cb478 R14:
00000000004d86c8 R15:
00000000ffffffff
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:204 [inline]
kmsan_internal_poison_shadow+0x92/0x150 mm/kmsan/kmsan.c:158
kmsan_kmalloc+0xa6/0x130 mm/kmsan/kmsan_hooks.c:176
kmsan_slab_alloc+0xe/0x10 mm/kmsan/kmsan_hooks.c:185
slab_post_alloc_hook mm/slab.h:446 [inline]
slab_alloc_node mm/slub.c:2759 [inline]
__kmalloc_node_track_caller+0xe18/0x1030 mm/slub.c:4383
__kmalloc_reserve net/core/skbuff.c:137 [inline]
__alloc_skb+0x309/0xa20 net/core/skbuff.c:205
alloc_skb include/linux/skbuff.h:998 [inline]
netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline]
netlink_sendmsg+0xb82/0x1300 net/netlink/af_netlink.c:1892
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg net/socket.c:631 [inline]
___sys_sendmsg+0xdb9/0x11b0 net/socket.c:2116
__sys_sendmsg net/socket.c:2154 [inline]
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg+0x305/0x460 net/socket.c:2161
__x64_sys_sendmsg+0x4a/0x70 net/socket.c:2161
do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291
entry_SYSCALL_64_after_hwframe+0x63/0xe7
The uninitialised access happened in tipc_nl_compat_link_reset_stats:
nla_put_string(skb, TIPC_NLA_LINK_NAME, name)
This is because name string is not validated before it's used.
Reported-by: syzbot+e01d94b5a4c266be6e4c@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ying Xue [Mon, 14 Jan 2019 09:22:24 +0000 (17:22 +0800)]
tipc: fix uninit-value in in tipc_conn_rcv_sub
syzbot reported:
BUG: KMSAN: uninit-value in tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
CPU: 0 PID: 66 Comm: kworker/u4:4 Not tainted 4.17.0-rc3+ #88
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: tipc_rcv tipc_conn_recv_work
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:113
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:683
tipc_conn_rcv_sub+0x184/0x950 net/tipc/topsrv.c:373
tipc_conn_rcv_from_sock net/tipc/topsrv.c:409 [inline]
tipc_conn_recv_work+0x3cd/0x560 net/tipc/topsrv.c:424
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2279
kthread+0x539/0x720 kernel/kthread.c:239
ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:412
Local variable description: ----s.i@tipc_conn_recv_work
Variable was created at:
tipc_conn_recv_work+0x65/0x560 net/tipc/topsrv.c:419
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2145
In tipc_conn_rcv_from_sock(), it always supposes the length of message
received from sock_recvmsg() is not smaller than the size of struct
tipc_subscr. However, this assumption is false. Especially when the
length of received message is shorter than struct tipc_subscr size,
we will end up touching uninitialized fields in tipc_conn_rcv_sub().
Reported-by: syzbot+8951a3065ee7fd6d6e23@syzkaller.appspotmail.com
Reported-by: syzbot+75e6e042c5bbf691fc82@syzkaller.appspotmail.com
Signed-off-by: Ying Xue <ying.xue@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 16 Jan 2019 04:12:01 +0000 (20:12 -0800)]
Merge branch 'sch_cake-leaf-qdisc-fixes'
Toke Høiland-Jørgensen says:
====================
sched: Fix qdisc interactions exposed by using sch_cake as a leaf qdisc
This series fixes a couple of issues exposed by running sch_cake as a
leaf qdisc in an HFSC tree, which were discovered and reported by Pete
Heist. The interaction between CAKE's GSO splitting and the parent
qdisc's notion of its own queue length could cause queue stalls. While
investigating the report, I also noticed that several qdiscs would
dereference the skb pointer after dequeue, which is potentially
problematic since the GSO splitting code also frees the original skb.
See the individual patches in the series for details.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Wed, 9 Jan 2019 16:09:44 +0000 (17:09 +0100)]
sch_cake: Correctly update parent qlen when splitting GSO packets
To ensure parent qdiscs have the same notion of the number of enqueued
packets even after splitting a GSO packet, update the qdisc tree with the
number of packets that was added due to the split.
Reported-by: Pete Heist <pete@heistp.net>
Tested-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Wed, 9 Jan 2019 16:09:43 +0000 (17:09 +0100)]
sched: Fix detection of empty queues in child qdiscs
Several qdiscs check on enqueue whether the packet was enqueued to a class
with an empty queue, in which case the class is activated. This is done by
checking if the qlen is exactly 1 after enqueue. However, if GSO splitting
is enabled in the child qdisc, a single packet can result in a qlen longer
than 1. This means the activation check fails, leading to a stalled queue.
Fix this by checking if the queue is empty *before* enqueue, and running
the activation logic if this was the case.
Reported-by: Pete Heist <pete@heistp.net>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Toke Høiland-Jørgensen [Wed, 9 Jan 2019 16:09:42 +0000 (17:09 +0100)]
sched: Avoid dereferencing skb pointer after child enqueue
Parent qdiscs may dereference the pointer to the enqueued skb after
enqueue. However, both CAKE and TBF call consume_skb() on the original skb
when splitting GSO packets, leading to a potential use-after-free in the
parent. Fix this by avoiding dereferencing the skb pointer after enqueueing
to the child.
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stanislav Fomichev [Tue, 15 Jan 2019 22:03:27 +0000 (14:03 -0800)]
tools/bpf: properly account for libbfd variations
On some platforms, in order to link against libbfd, we need to
link against liberty and even possibly libz. Account for that
in the bpftool Makefile. We now have proper feature detection
for each case, so handle each one separately.
See recent commit
14541b1e7e72 ("perf build: Don't unconditionally link the
libbfd feature test to -liberty and -lz") where I fixed feature
detection.
v2 (addressed Jakub's nits):
* better syntax for 'else ifeq'
* no space between ifeq args
v3:
* use LIBS, not EXTLIBS for -DHAVE_LIBBFD_SUPPORT
Fixes:
29a9c10e4110 ("bpftool: make libbfd optional")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Hangbin Liu [Thu, 10 Jan 2019 03:17:42 +0000 (11:17 +0800)]
ip6_gre: update version related info when changing link
We forgot to update ip6erspan version related info when changing link,
which will cause setting new hwid failed.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes:
94d7d8f292870 ("ip6_gre: add erspan v2 support")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heiner Kallweit [Wed, 9 Jan 2019 19:34:56 +0000 (20:34 +0100)]
net: phy: fix too strict check in phy_start_aneg
When adding checks to detect wrong usage of the phylib API we added
a check to phy_start_aneg() which is too strict. If the phylib
state machine is in state PHY_HALTED we should allow reconfiguring
and restarting aneg, and just don't touch the state.
Fixes:
2b3e88ea6528 ("net: phy: improve phy state checking")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher [Wed, 9 Jan 2019 17:10:53 +0000 (09:10 -0800)]
Revert "igb: reduce CPU0 latency when updating statistics"
This reverts commit
59361316afcb08569af21e1af83e89c7051c055a.
Due to problems found in additional testing, this causes an illegal
context switch in the RCU read-side critical section.
CC: Dave Jones <davej@codemonkey.org.uk>
CC: Cong Wang <xiyou.wangcong@gmail.com>
CC: Jan Jablonsky <jan.jablonsky@thalesgroup.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Wed, 9 Jan 2019 10:50:07 +0000 (13:50 +0300)]
selftests/txtimestamp: Fix an equals vs assign bug
This should be == instead of =.
Fixes:
b52354aa068e ("selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel [Wed, 9 Jan 2019 09:57:39 +0000 (09:57 +0000)]
net: ipv4: Fix memory leak in network namespace dismantle
IPv4 routing tables are flushed in two cases:
1. In response to events in the netdev and inetaddr notification chains
2. When a network namespace is being dismantled
In both cases only routes associated with a dead nexthop group are
flushed. However, a nexthop group will only be marked as dead in case it
is populated with actual nexthops using a nexthop device. This is not
the case when the route in question is an error route (e.g.,
'blackhole', 'unreachable').
Therefore, when a network namespace is being dismantled such routes are
not flushed and leaked [1].
To reproduce:
# ip netns add blue
# ip -n blue route add unreachable 192.0.2.0/24
# ip netns del blue
Fix this by not skipping error routes that are not marked with
RTNH_F_DEAD when flushing the routing tables.
To prevent the flushing of such routes in case #1, add a parameter to
fib_table_flush() that indicates if the table is flushed as part of
namespace dismantle or not.
Note that this problem does not exist in IPv6 since error routes are
associated with the loopback device.
[1]
unreferenced object 0xffff888066650338 (size 56):
comm "ip", pid 1206, jiffies
4294786063 (age 26.235s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 b0 1c 62 61 80 88 ff ff ..........ba....
e8 8b a1 64 80 88 ff ff 00 07 00 08 fe 00 00 00 ...d............
backtrace:
[<
00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<
00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<
00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<
00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<
0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<
00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<
00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<
000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<
00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<
00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<
000000003a8b605b>] 0xffffffffffffffff
unreferenced object 0xffff888061621c88 (size 48):
comm "ip", pid 1206, jiffies
4294786063 (age 26.235s)
hex dump (first 32 bytes):
6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
6b 6b 6b 6b 6b 6b 6b 6b d8 8e 26 5f 80 88 ff ff kkkkkkkk..&_....
backtrace:
[<
00000000733609e3>] fib_table_insert+0x978/0x1500
[<
00000000856ed27d>] inet_rtm_newroute+0x129/0x220
[<
00000000fcdfc00a>] rtnetlink_rcv_msg+0x397/0xa20
[<
00000000cb85801a>] netlink_rcv_skb+0x132/0x380
[<
00000000ebc991d2>] netlink_unicast+0x4c0/0x690
[<
0000000014f62875>] netlink_sendmsg+0x929/0xe10
[<
00000000bac9d967>] sock_sendmsg+0xc8/0x110
[<
00000000223e6485>] ___sys_sendmsg+0x77a/0x8f0
[<
000000002e94f880>] __sys_sendmsg+0xf7/0x250
[<
00000000ccb1fa72>] do_syscall_64+0x14d/0x610
[<
00000000ffbe3dae>] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[<
000000003a8b605b>] 0xffffffffffffffff
Fixes:
8cced9eff1d4 ("[NETNS]: Enable routing configuration in non-initial namespace.")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Olivier Matz [Wed, 9 Jan 2019 09:57:21 +0000 (10:57 +0100)]
ip6_gre: fix tunnel list corruption for x-netns
In changelink ops, the ip6gre_net pointer is retrieved from
dev_net(dev), which is wrong in case of x-netns. Thus, the tunnel is not
unlinked from its current list and is relinked into another net
namespace. This corrupts the tunnel lists and can later trigger a kernel
oops.
Fix this by retrieving the netns from device private area.
Fixes:
c8632fc30bb0 ("net: ip6_gre: Split up ip6gre_changelink()")
Cc: Petr Machata <petrm@mellanox.com>
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 15 Jan 2019 21:31:46 +0000 (13:31 -0800)]
Merge git://git./pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This is the first batch of Netfilter fixes for your net tree:
1) Fix endless loop in nf_tables rules netlink dump, from Phil Sutter.
2) Reference counter leak in object from the error path, from Taehee Yoo.
3) Selective rule dump requires table and chain.
4) Fix DNAT with nft_flow_offload reverse route lookup, from wenxu.
5) Use GFP_KERNEL_ACCOUNT in vmalloc allocation from ebtables, from
Shakeel Butt.
6) Set ifindex from route to fix interaction with VRF slave device,
also from wenxu.
7) Use nfct_help() to check for conntrack helper, IPS_HELPER status
flag is only set from explicit helpers via -j CT, from Henry Yen.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Lorenz Bauer [Tue, 8 Jan 2019 13:58:00 +0000 (13:58 +0000)]
bpf: libbpf: retry loading program on EAGAIN
Commit
c3494801cd17 ("bpf: check pending signals while
verifying programs") makes it possible for the BPF_PROG_LOAD
to fail with EAGAIN. Retry unconditionally in this case.
Fixes:
c3494801cd17 ("bpf: check pending signals while verifying programs")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Yonghong Song [Sat, 12 Jan 2019 23:04:30 +0000 (15:04 -0800)]
samples/bpf: workaround clang asm goto compilation errors
x86 compilation has required asm goto support since 4.17.
Since clang does not support asm goto, at 4.17,
Commit
b1ae32dbab50 ("x86/cpufeature: Guard asm_volatile_goto usage
for BPF compilation") worked around the issue by permitting an
alternative implementation without asm goto for clang.
At 5.0, more asm goto usages appeared.
[yhs@148 x86]$ egrep -r asm_volatile_goto
include/asm/cpufeature.h: asm_volatile_goto("1: jmp 6f\n"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/jump_label.h: asm_volatile_goto("1:"
include/asm/rmwcc.h: asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
include/asm/uaccess.h: asm_volatile_goto("\n" \
include/asm/uaccess.h: asm_volatile_goto("\n" \
[yhs@148 x86]$
Compiling samples/bpf directories, most bpf programs failed
compilation with error messages like:
In file included from /home/yhs/work/bpf-next/samples/bpf/xdp_sample_pkts_kern.c:2:
In file included from /home/yhs/work/bpf-next/include/linux/ptrace.h:6:
In file included from /home/yhs/work/bpf-next/include/linux/sched.h:15:
In file included from /home/yhs/work/bpf-next/include/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/uapi/linux/sem.h:5:
In file included from /home/yhs/work/bpf-next/include/linux/ipc.h:9:
In file included from /home/yhs/work/bpf-next/include/linux/refcount.h:72:
/home/yhs/work/bpf-next/arch/x86/include/asm/refcount.h:70:9: error: 'asm goto' constructs are not supported yet
return GEN_BINARY_SUFFIXED_RMWcc(LOCK_PREFIX "subl",
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:67:2: note: expanded from macro 'GEN_BINARY_SUFFIXED_RMWcc'
__GEN_RMWcc(op " %[val], %[var]\n\t" suffix, var, cc, \
^
/home/yhs/work/bpf-next/arch/x86/include/asm/rmwcc.h:21:2: note: expanded from macro '__GEN_RMWcc'
asm_volatile_goto (fullop "; j" #cc " %l[cc_label]" \
^
/home/yhs/work/bpf-next/include/linux/compiler_types.h:188:37: note: expanded from macro 'asm_volatile_goto'
#define asm_volatile_goto(x...) asm goto(x)
Most implementation does not even provide an alternative
implementation. And it is also not practical to make changes
for each call site.
This patch workarounded the asm goto issue by redefining the macro like below:
#define asm_volatile_goto(x...) asm volatile("invalid use of asm_volatile_goto")
If asm_volatile_goto is not used by bpf programs, which is typically the case, nothing bad
will happen. If asm_volatile_goto is used by bpf programs, which is incorrect, the compiler
will issue an error since "invalid use of asm_volatile_goto" is not valid assembly codes.
With this patch, all bpf programs under samples/bpf can pass compilation.
Note that bpf programs under tools/testing/selftests/bpf/ compiled fine as
they do not access kernel internal headers.
Fixes:
e769742d3584 ("Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"")
Fixes:
18fe58229d80 ("x86, asm: change the GEN_*_RMWcc() macros to not quote the condition")
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Stanislav Fomichev [Mon, 14 Jan 2019 17:41:41 +0000 (09:41 -0800)]
selftests/bpf: install with_tunnels.sh for test_flow_dissector.sh
test_flow_dissector.sh depends on both with_addr.sh and with_tunnels.sh
However, we install only with_addr.sh.
Add with_tunnels.sh to TEST_PROGS_EXTENDED to make sure it gets
installed as well.
Tested with: make TARGETS=bpf install INSTALL_PATH=$PWD/x
Fixes:
ef4ab8447aa26 ("selftests: bpf: install script with_addr.sh")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Krzysztof Kazimierczak [Thu, 10 Jan 2019 19:29:02 +0000 (20:29 +0100)]
xsk: Check if a queue exists during umem setup
In the xdp_umem_assign_dev() path, the xsk code does not
check if a queue for which umem is to be created exists.
It leads to a situation where umem is not assigned to any
Tx/Rx queue of a netdevice, without notifying the stack
about an error. This affects both XDP_SKB and XDP_DRV
modes - in case of XDP_DRV_ZC, queue index is checked by
the driver.
This patch fixes xsk code, so that in both XDP_SKB and
XDP_DRV mode of AF_XDP, an error is returned when requested
queue index exceedes an existing maximum.
Fixes:
c9b47cc1fabca ("xsk: fix bug when trying to use both copy and zero-copy on one queue id")
Reported-by: Jakub Spizewski <jakub.spizewski@intel.com>
Signed-off-by: Krzysztof Kazimierczak <krzysztof.kazimierczak@intel.com>
Acked-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Linus Torvalds [Tue, 15 Jan 2019 17:28:26 +0000 (05:28 +1200)]
Merge tag 'trace-v5.0-rc1' of git://git./linux/kernel/git/rostedt/linux-trace
Pull tracing fix from Steven Rostedt:
"Andrea Righi fixed a NULL pointer dereference in trace_kprobe_create()
It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to the krpobe_events file"
* tag 'trace-v5.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()
Linus Torvalds [Tue, 15 Jan 2019 17:13:36 +0000 (05:13 +1200)]
Merge git://git./linux/kernel/git/davem/net
Pull networking fixes from David Miller:
1) Fix regression in multi-SKB responses to RTM_GETADDR, from Arthur
Gautier.
2) Fix ipv6 frag parsing in openvswitch, from Yi-Hung Wei.
3) Unbounded recursion in ipv4 and ipv6 GUE tunnels, from Stefano
Brivio.
4) Use after free in hns driver, from Yonglong Liu.
5) icmp6_send() needs to handle the case of NULL skb, from Eric
Dumazet.
6) Missing rcu read lock in __inet6_bind() when operating on mapped
addresses, from David Ahern.
7) Memory leak in tipc-nl_compat_publ_dump(), from Gustavo A. R. Silva.
8) Fix PHY vs r8169 module loading ordering issues, from Heiner
Kallweit.
9) Fix bridge vlan memory leak, from Ido Schimmel.
10) Dev refcount leak in AF_PACKET, from Jason Gunthorpe.
11) Infoleak in ipv6_local_error(), flow label isn't completely
initialized. From Eric Dumazet.
12) Handle mv88e6390 errata, from Andrew Lunn.
13) Making vhost/vsock CID hashing consistent, from Zha Bin.
14) Fix lack of UMH cleanup when it unexpectedly exits, from Taehee Yoo.
15) Bridge forwarding must clear skb->tstamp, from Paolo Abeni.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
bnxt_en: Fix context memory allocation.
bnxt_en: Fix ring checking logic on 57500 chips.
mISDN: hfcsusb: Use struct_size() in kzalloc()
net: clear skb->tstamp in bridge forwarding path
net: bpfilter: disallow to remove bpfilter module while being used
net: bpfilter: restart bpfilter_umh when error occurred
net: bpfilter: use cleanup callback to release umh_info
umh: add exit routine for UMH process
isdn: i4l: isdn_tty: Fix some concurrency double-free bugs
vhost/vsock: fix vhost vsock cid hashing inconsistent
net: stmmac: Prevent RX starvation in stmmac_napi_poll()
net: stmmac: Fix the logic of checking if RX Watchdog must be enabled
net: stmmac: Check if CBS is supported before configuring
net: stmmac: dwxgmac2: Only clear interrupts that are active
net: stmmac: Fix PCI module removal leak
tools/bpf: fix bpftool map dump with bitfields
tools/bpf: test btf bitfield with >=256 struct member offset
bpf: fix bpffs bitfield pretty print
net: ethernet: mediatek: fix warning in phy_start_aneg
tcp: change txhash on SYN-data timeout
...
Andrea Righi [Fri, 11 Jan 2019 06:01:13 +0000 (07:01 +0100)]
tracing/kprobes: Fix NULL pointer dereference in trace_kprobe_create()
It is possible to trigger a NULL pointer dereference by writing an
incorrectly formatted string to krpobe_events (trying to create a
kretprobe omitting the symbol).
Example:
echo "r:event_1 " >> /sys/kernel/debug/tracing/kprobe_events
That triggers this:
BUG: unable to handle kernel NULL pointer dereference at
0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 6 PID: 1757 Comm: bash Not tainted 5.0.0-rc1+ #125
Hardware name: Dell Inc. XPS 13 9370/0F6P3V, BIOS 1.5.1 08/09/2018
RIP: 0010:kstrtoull+0x2/0x20
Code: 28 00 00 00 75 17 48 83 c4 18 5b 41 5c 5d c3 b8 ea ff ff ff eb e1 b8 de ff ff ff eb da e8 d6 36 bb ff 66 0f 1f 44 00 00 31 c0 <80> 3f 2b 55 48 89 e5 0f 94 c0 48 01 c7 e8 5c ff ff ff 5d c3 66 2e
RSP: 0018:
ffffb5d482e57cb8 EFLAGS:
00010246
RAX:
0000000000000000 RBX:
0000000000000001 RCX:
ffffffff82b12720
RDX:
ffffb5d482e57cf8 RSI:
0000000000000000 RDI:
0000000000000000
RBP:
ffffb5d482e57d70 R08:
ffffa0c05e5a7080 R09:
ffffa0c05e003980
R10:
0000000000000000 R11:
0000000040000000 R12:
ffffa0c04fe87b08
R13:
0000000000000001 R14:
000000000000000b R15:
ffffa0c058d749e1
FS:
00007f137c7f7740(0000) GS:
ffffa0c05e580000(0000) knlGS:
0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
CR2:
0000000000000000 CR3:
0000000497d46004 CR4:
00000000003606e0
Call Trace:
? trace_kprobe_create+0xb6/0x840
? _cond_resched+0x19/0x40
? _cond_resched+0x19/0x40
? __kmalloc+0x62/0x210
? argv_split+0x8f/0x140
? trace_kprobe_create+0x840/0x840
? trace_kprobe_create+0x840/0x840
create_or_delete_trace_kprobe+0x11/0x30
trace_run_command+0x50/0x90
trace_parse_run_command+0xc1/0x160
probes_write+0x10/0x20
__vfs_write+0x3a/0x1b0
? apparmor_file_permission+0x1a/0x20
? security_file_permission+0x31/0xf0
? _cond_resched+0x19/0x40
vfs_write+0xb1/0x1a0
ksys_write+0x55/0xc0
__x64_sys_write+0x1a/0x20
do_syscall_64+0x5a/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix by doing the proper argument checks in trace_kprobe_create().
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/lkml/20190111095108.b79a2ee026185cbd62365977@kernel.org
Link: http://lkml.kernel.org/r/20190111060113.GA22841@xps-13
Fixes:
6212dd29683e ("tracing/kprobes: Use dyn_event framework for kprobe events")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Andrea Righi <righi.andrea@gmail.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Ming Lei [Tue, 15 Jan 2019 03:59:52 +0000 (11:59 +0800)]
sbitmap: Protect swap_lock from hardirq
Because we may call blk_mq_get_driver_tag() directly from
blk_mq_dispatch_rq_list() without holding any lock, then HARDIRQ may
come and the above DEADLOCK is triggered.
Commit
ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq") tries to
fix this issue by using 'spin_lock_bh', which isn't enough because we
complete request from hardirq context direclty in case of multiqueue.
Cc: Clark Williams <williams@redhat.com>
Fixes:
ab53dcfb3e7b ("sbitmap: Protect swap_lock from hardirq")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steven Rostedt (VMware) [Mon, 14 Jan 2019 17:25:40 +0000 (12:25 -0500)]
sbitmap: Protect swap_lock from softirqs
The swap_lock used by sbitmap has a chain with locks taken from softirq,
but the swap_lock is not protected from being preempted by softirqs.
A chain exists of:
sbq->ws[i].wait -> dispatch_wait_lock -> swap_lock
Where the sbq->ws[i].wait lock can be taken from softirq context, which
means all locks below it in the chain must also be protected from
softirqs.
Reported-by: Clark Williams <williams@redhat.com>
Fixes:
58ab5e32e6fd ("sbitmap: silence bogus lockdep IRQ warning")
Fixes:
ea86ea2cdced ("sbitmap: amortize cost of clearing bits")
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>