Neil Armstrong [Tue, 29 Nov 2022 14:47:03 +0000 (15:47 +0100)]
soc: qcom: geni-se: add desc struct to specify clocks from device match data
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Prepare support for the I2C Master Hub variant by moving the required
clocks list to a new desc struct then passing it through the compatible
match data.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Neil Armstrong [Tue, 29 Nov 2022 14:47:02 +0000 (15:47 +0100)]
dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Document the I2C Serial Engine variant used within the I2C Master
Hub Wrapper.
This serial engine variant lacks DMA support, requires a core clock,
and since DMA support is lacking the memory interconnect path isn't
needed.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Neil Armstrong [Tue, 29 Nov 2022 14:47:01 +0000 (15:47 +0100)]
dt-bindings: qcom: geni-se: document I2C Master Hub wrapper variant
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.
Document the variant compatible, forbid UART and SPI sub-nodes,
and remove requirement for the Master AHB clock and iommu property.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Lad Prabhakar [Tue, 15 Nov 2022 12:30:18 +0000 (12:30 +0000)]
dt-bindings: i2c: renesas,riic: Document RZ/Five SoC
The RIIC block on the RZ/Five SoC is identical to one found on the RZ/G2UL
SoC. "renesas,riic-r9a07g043" compatible string will be used on the
RZ/Five SoC so to make this clear, update the comment to include RZ/Five
SoC.
No driver changes are required as generic compatible string
"renesas,riic-rz" will be used as a fallback on RZ/Five SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Akhil R [Thu, 17 Nov 2022 10:04:15 +0000 (15:34 +0530)]
i2c: tegra: Set ACPI node as primary fwnode
Set ACPI node as the primary fwnode of I2C adapter to allow
enumeration of child devices from the ACPI table
Signed-off-by: Zubair Waheed <zwaheed@nvidia.com>
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Corentin Labbe [Mon, 14 Nov 2022 11:56:06 +0000 (11:56 +0000)]
i2c: smbus: add DDR support for SPD
On my x05 laptop I got:
Memory type 0x12 not supported yet, not instantiating SPD
Adding the 0x12 case lead to a successful instantiated SPD AT24 EEPROM.
i801_smbus 0000:00:1f.3: SMBus using polling
i2c i2c-6: 2/2 memory slots populated (from DMI)
at24 6-0050: 256 byte spd EEPROM, read-only
i2c i2c-6: Successfully instantiated SPD at 0x50
at24 6-0051: 256 byte spd EEPROM, read-only
And then, I decoded it successfully via decode-dimms.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Wolfram Sang [Mon, 14 Nov 2022 19:51:06 +0000 (20:51 +0100)]
Merge branch 'i2c/client_device_id_helper-immutable' into i2c/for-mergewindow
Angel Iglesias [Sun, 13 Nov 2022 17:46:30 +0000 (18:46 +0100)]
i2c: core: Introduce i2c_client_get_device_id helper function
Introduces new helper function to aid in .probe_new() refactors. In order
to use existing i2c_get_device_id() on the probe callback, the device
match table needs to be accessible in that function, which would require
bigger refactors in some drivers using the deprecated .probe callback.
This issue was discussed in more detail in the IIO mailing list.
Link: https://lore.kernel.org/all/20221023132302.911644-11-u.kleine-koenig@pengutronix.de/
Suggested-by: Nuno Sá <noname.nuno@gmail.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Arminder Singh [Sat, 5 Nov 2022 11:56:49 +0000 (07:56 -0400)]
i2c: /pasemi: PASemi I2C controller IRQ enablement
This patch adds IRQ support to the PASemi I2C controller driver to
increase the performace of I2C transactions on platforms with PASemi I2C
controllers. While primarily intended for Apple silicon platforms, this
patch should also help in enabling IRQ support for older PASemi hardware
as well should the need arise.
This version of the patch has been tested on an M1 Ultra Mac Studio,
as well as an M1 MacBook Pro, and userspace launches successfully
while using the IRQ path for I2C transactions.
Signed-off-by: Arminder Singh <arminders208@outlook.com>
Reviewed-by: Sven Peter <sven@svenpeter.dev>
Reviewed-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Minghao Chi [Thu, 10 Nov 2022 09:23:42 +0000 (17:23 +0800)]
i2c: imx: use devm_platform_get_and_ioremap_resource()
Convert platform_get_resource(), devm_ioremap_resource() to a single
call to devm_platform_get_and_ioremap_resource(), as this is exactly
what this function does.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:48 +0000 (15:42 +0200)]
i2c: designware: Add comment to custom register value constants
DW_IC_COMP_VERSION register contains the ASCII representation of the
Synopsys component version. Here 0x3131312A == "111*" means version
1.11* required for DW_IC_SDA_HOLD register availability where '*' means
any letter starting from 'a'.
DW_IC_COMP_TYPE is constant and is derived from two ASCII letters "DW"
followed by a 16-bit unsigned number.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:47 +0000 (15:42 +0200)]
i2c: designware: Align defines in i2c-designware-core.h
Align all defines to the same column.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:46 +0000 (15:42 +0200)]
i2c: designware: Remove common i2c_dw_disable_int()
Commit
90312351fd1e ("i2c: designware: MASTER mode as separated driver")
introduced disable_int pointer but there is no real use for it. Both
i2c-designware-master.c and i2c-designware-slave.c set it to the same
i2c_dw_disable_int() and scope is inside the same kernel module.
Since i2c_dw_disable_int() is just masking interrupts and the direct
DW_IC_INTR_MASK register write looks more clear in the code use that and
remove it from common code.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:45 +0000 (15:42 +0200)]
i2c: designware: Simplify master interrupt handler nesting
In my opinion a few lines of spurious interrupt detection code can be
moved to the actual master interrupt handling function i2c_dw_isr()
without hurting readability.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:44 +0000 (15:42 +0200)]
i2c: designware: Move debug print in i2c_dw_isr()
It is kind of needless to print interrupt status when code immediately
after that finds interrupt was not originating from this device.
Therefore move it after spurious interrupt detection.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:43 +0000 (15:42 +0200)]
i2c: designware: Do not process interrupt when device is suspended
Do not return with interrupt handled if host controller is off and thus
interrupt is originating from other device or is spurious.
Add a check to detect when controller is runtime suspended or
transitioning/reset. In latter case all raw interrupt status register
bits may read one. In both cases return IRQ_NONE to indicate interrupt
was not from this device.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:42 +0000 (15:42 +0200)]
i2c: designware: Simplify slave interrupt handler nesting
Interrupt processing code in i2c-designware-slave.c is bit more readable
if not divided into another subroutine. Also explicit IRQ_NONE and
IRQ_HANDLED return values are more obvious.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:41 +0000 (15:42 +0200)]
i2c: designware: Remove unused completion code from i2c-designware-slave
Remove unused completion code from i2c-designware-slave.c. Used only in
i2c-designware-master.c.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:40 +0000 (15:42 +0200)]
i2c: designware: Remove needless initializations from i2c_dw_reg_slave()
These struct dw_i2c_dev members are not used in i2c-designware-slave.c
so remove re-initialization of them from i2c_dw_reg_slave().
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:39 +0000 (15:42 +0200)]
i2c: designware: Define software status flags with BIT()
Define software status flags with a BIT() macro. While at it remove
STATUS_IDLE and replace its use with zero initialization and status
flags clearing with a mask.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:38 +0000 (15:42 +0200)]
i2c: designware: Empty receive FIFO in slave interrupt handler
Writes from I2C bus often fail when testing the i2c-designware-slave.c
with the slave-eeprom backend. The same writes work correctly when
testing with a real 24c02 EEPROM chip.
In the tests below an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6.
1. i2cset -y 6 0x65 0x00 0x55
Single byte 0x55 write into address 0x00. No data goes into simulated
EEPROM. Debug prints from the i2c_dw_irq_handler_slave():
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
2. i2ctransfer -y 6 w9@0x65 0x00 0xff-
Write 8 bytes with decrementing value starting from 0xff at address 0x00
and forward. Only some of the data goes into arbitrary addresses.
Content is something like below but varies:
00000000 f9 f8 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000050 00 00 00 00 00 00 ff fe 00 00 00 00 00 00 00 00 |................|
000000f0 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fb fa |................|
In this case debug prints were:
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x1 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x714 : INTR_STAT=0x204
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x514 : INTR_STAT=0x4
0x1 STATUS SLAVE_ACTIVITY=0x0 : RAW_INTR_STAT=0x510 : INTR_STAT=0x0
Both cases show there is more data coming from the receive FIFO still
after detecting the STOP condition. This can be seen from interrupt
status bits DW_IC_INTR_STOP_DET (0x200) and DW_IC_INTR_RX_FULL (0x4).
Perhaps due interrupt latencies the receive FIFO is not read fast
enough, STOP detection happens synchronously when it occurs on the I2C
bus and the DW_IC_INTR_RX_FULL keeps coming as long as there are more
bytes in the receive FIFO.
Fix this by reading the receive FIFO completely empty whenever
DW_IC_INTR_RX_FULL occurs. Use RFNE, Receive FIFO Not Empty bit in the
DW_IC_STATUS register to loop through bytes in the FIFO.
While at it do not test the return code from i2c_slave_event() for the
I2C_SLAVE_WRITE_RECEIVED since to my understanding this hardware cannot
generate NACK to incoming bytes and debug print itself does not have
much value.
Reported-by: Tian Ye <tianye@sugon.com>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jarkko Nikula [Mon, 7 Nov 2022 13:42:37 +0000 (15:42 +0200)]
i2c: designware: Fix slave state machine for sequential reads
Some read types from I2C bus don't work correctly when testing the
i2c-designware-slave.c with the slave-eeprom backend. The same reads
work correctly when testing with a real 24c02 EEPROM chip.
In the following tests an i2c-designware-slave.c instance with the
slave-eeprom backend is configured to act as a simulated 24c02 at
address 0x65 on an I2C host bus 6:
1. i2cdump -y 6 0x65 b (OK)
Random read. Each byte are read using a byte address write with a
current address read in a same message.
2. i2cdump -y 6 0x65 c (OK, was NOK before commit
3b5f7f10ff6e when it
was repeating the 1st byte)
Repeated current address read. One byte address write message
followed by repeated current address read messages.
3. i2cdump -y 6 0x65 i (NOK, each 32 byte block repeats the 1st byte of
block)
Sequential read using SMBus Block Read. For each 32 byte block a byte
address write followed by 32 sequental reads in a same message.
These findings are explained because the implementation has had a
mismatch between hardware interrupts and what I2C slave events should be
sent after those interrupts. Despite that the case 1 happened to have
always the I2C slave events sent to a right order with a right data
between backend and the I2C bus.
Hardware generates the DW_IC_INTR_RD_REQ interrupt when another host is
attempting to read and for sequential reads after. DW_IC_INTR_RX_DONE
occurs when host does not acknowledge a transmitted byte which is an
indication the end of transmission.
Those interrupts do not match directly with I2C_SLAVE_READ_REQUESTED and
I2C_SLAVE_READ_PROCESSED events which is how the code was and is
practically using them. The slave-eeprom backend increases the buffer
index with the I2C_SLAVE_READ_PROCESSED event and returns the data from
current index when receiving only the I2C_SLAVE_READ_REQUESTED event.
That explains the repeated bytes in case 3 and also case 2 before
commit
3b5f7f10ff6e ("i2c: designware: slave should do WRITE_REQUESTED
before WRITE_RECEIVED").
Patch fixes the case 3 while keep cases 1 and 2 working with following
changes:
- First DW_IC_INTR_RD_REQ interrupt will change the state machine to
read in progress state, send I2C_SLAVE_READ_REQUESTED event and
transmit the first byte from backend
- Subsequent DW_IC_INTR_RD_REQ interrupts will send
I2C_SLAVE_READ_PROCESSED events and transmit next bytes from backend
- STOP won't change the state machine. Otherwise case 2 won't work since
we cannot distinguish current address read from sequentiel read
- DW_IC_INTR_RX_DONE interrupt is needless since there is no mechanism
to inform it to a backend. It cannot be used to change state machine
at the end of read either due the same reason than above
- Next host write to us will change the state machine from read to write
in progress state
- STATUS_WRITE_IN_PROGRESS and STATUS_READ_IN_PROGRESS are considered
now to be status flags not the state of the driver. This is how we
treat them in i2c-designware-master.c
While at it do not test the return code from i2c_slave_event() for
I2C_SLAVE_READ_REQUESTED and I2C_SLAVE_READ_PROCESSED since it returns
always 0.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Weilong Chen [Tue, 1 Nov 2022 08:07:28 +0000 (16:07 +0800)]
dt-bindings: i2c: add entry for hisilicon,ascend910-i2c
Add the new compatible for HiSilicon i2c.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Weilong Chen [Tue, 1 Nov 2022 08:07:27 +0000 (16:07 +0800)]
i2c: hisi: Add initial device tree support
The HiSilicon I2C controller can be used on embedded platform, which
boot from devicetree.
Signed-off-by: Weilong Chen <chenweilong@huawei.com>
Acked-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Andre Przywara [Tue, 1 Nov 2022 14:16:52 +0000 (14:16 +0000)]
dt-bindings: i2c: mv64xxx: Add F1C100s compatible string
The I2C controller IP used in the Allwinner F1C100s series of SoCs is
compatible with the ones used in the other Allwinner SoCs.
Add an F1C100s specific compatible string to the list of existing names.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jonathan Neuschäfer [Sat, 8 Oct 2022 12:59:24 +0000 (14:59 +0200)]
i2c: npcm7xx: Annotate register field definitions with longer names
To make the code easier to understand, add longer names to the
definitions of register fields. These longer names are based on source
code published by DELL/AESS for WPCM450, but should apply just as well
to NPCM7xx and NPCM8xx.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Jonathan Neuschäfer [Sat, 8 Oct 2022 12:59:23 +0000 (14:59 +0200)]
i2c: npcm7xx: Group bank 0/1 registers together for readability
The unlabelled registers NPCM_I2CCTL4 to NPCM_I2CSCLHT overlap with the
bank 1 registers below, and they are accessed after selecting bank 0, so
they clearly belong to bank 0.
Move them together with the other bank 0 registers, and move the
unrelated definition of npcm_i2caddr down to keep the banked registers
in one piece.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Tali Perry <tali.perry1@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Frank Wunderlich [Sun, 9 Oct 2022 10:16:31 +0000 (12:16 +0200)]
i2c: mediatek: add mt7986 support
Add i2c support for MT7986 SoC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Frank Wunderlich [Sun, 9 Oct 2022 10:16:30 +0000 (12:16 +0200)]
dt-bindings: i2c: update bindings for mt7986 soc
Add i2c compatible for MT7986 SOC.
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Raju Rangoju [Tue, 25 Oct 2022 18:11:24 +0000 (23:41 +0530)]
i2c: amd-mp2: use msix/msi if the hardware supports
Use msix or msi interrupts if the hardware supports it. Else, fallback to
legacy interrupts.
Co-developed-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Basavaraj Natikar <basavaraj.natikar@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Linus Torvalds [Sun, 30 Oct 2022 22:19:28 +0000 (15:19 -0700)]
Linux 6.1-rc3
Linus Torvalds [Sun, 30 Oct 2022 18:31:14 +0000 (11:31 -0700)]
Merge tag 'fbdev-for-6.1-rc3' of git://git./linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A use-after-free bugfix in the smscufx driver and various minor error
path fixes, smaller build fixes, sysfs fixes and typos in comments in
the stifb, sisfb, da8xxfb, xilinxfb, sm501fb, gbefb and cyber2000fb
drivers"
* tag 'fbdev-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: cyber2000fb: fix missing pci_disable_device()
fbdev: sisfb: use explicitly signed char
fbdev: smscufx: Fix several use-after-free bugs
fbdev: xilinxfb: Make xilinxfb_release() return void
fbdev: sisfb: fix repeated word in comment
fbdev: gbefb: Convert sysfs snprintf to sysfs_emit
fbdev: sm501fb: Convert sysfs snprintf to sysfs_emit
fbdev: stifb: Fall back to cfb_fillrect() on 32-bit HCRX cards
fbdev: da8xx-fb: Fix error handling in .remove()
fbdev: MIPS supports iomem addresses
Linus Torvalds [Sun, 30 Oct 2022 18:22:33 +0000 (11:22 -0700)]
Merge tag 'char-misc-6.1-rc3' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Some small driver fixes for 6.1-rc3. They include:
- iio driver bugfixes
- counter driver bugfixes
- coresight bugfixes, including a revert and then a second fix to get
it right.
All of these have been in linux-next with no reported problems"
* tag 'char-misc-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
misc: sgi-gru: use explicitly signed char
coresight: cti: Fix hang in cti_disable_hw()
Revert "coresight: cti: Fix hang in cti_disable_hw()"
counter: 104-quad-8: Fix race getting function mode and direction
counter: microchip-tcb-capture: Handle Signal1 read and Synapse
coresight: cti: Fix hang in cti_disable_hw()
coresight: Fix possible deadlock with lock dependency
counter: ti-ecap-capture: fix IS_ERR() vs NULL check
counter: Reduce DEFINE_COUNTER_ARRAY_POLARITY() to defining counter_array
iio: bmc150-accel-core: Fix unsafe buffer attributes
iio: adxl367: Fix unsafe buffer attributes
iio: adxl372: Fix unsafe buffer attributes
iio: at91-sama5d2_adc: Fix unsafe buffer attributes
iio: temperature: ltc2983: allocate iio channels once
tools: iio: iio_utils: fix digit calculation
iio: adc: stm32-adc: fix channel sampling time init
iio: adc: mcp3911: mask out device ID in debug prints
iio: adc: mcp3911: use correct id bits
iio: adc: mcp3911: return proper error code on failure to allocate trigger
iio: adc: mcp3911: fix sizeof() vs ARRAY_SIZE() bug
...
Linus Torvalds [Sun, 30 Oct 2022 17:35:07 +0000 (10:35 -0700)]
Merge tag 'usb-6.1-rc3' of git://git./linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"A few small USB fixes for 6.1-rc3. Include in here are:
- MAINTAINERS update, including a big one for the USB gadget
subsystem. Many thanks to Felipe for all of the years of hard work
he has done on this codebase, it was greatly appreciated.
- dwc3 driver fixes for reported problems.
- xhci driver fixes for reported problems.
- typec driver fixes for minor issues
- uvc gadget driver change, and then revert as it wasn't relevant for
6.1-final, as it is a new feature and people are still reviewing
and modifying it.
All of these have been in the linux-next tree with no reported issues"
* tag 'usb-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: dwc3: gadget: Don't set IMI for no_interrupt
usb: dwc3: gadget: Stop processing more requests on IMI
Revert "usb: gadget: uvc: limit isoc_sg to super speed gadgets"
xhci: Remove device endpoints from bandwidth list when freeing the device
xhci-pci: Set runtime PM as default policy on all xHC 1.2 or later devices
xhci: Add quirk to reset host back to default state at shutdown
usb: xhci: add XHCI_SPURIOUS_SUCCESS to ASM1042 despite being a V0.96 controller
usb: dwc3: st: Rely on child's compatible instead of name
usb: gadget: uvc: limit isoc_sg to super speed gadgets
usb: bdc: change state when port disconnected
usb: typec: ucsi: acpi: Implement resume callback
usb: typec: ucsi: Check the connection on resume
usb: gadget: aspeed: Fix probe regression
usb: gadget: uvc: fix sg handling during video encode
usb: gadget: uvc: fix sg handling in error case
usb: gadget: uvc: fix dropped frame after missed isoc
usb: dwc3: gadget: Don't delay End Transfer on delayed_status
usb: dwc3: Don't switch OTG -> peripheral if extcon is present
MAINTAINERS: Update maintainers for broadcom USB
MAINTAINERS: move USB gadget and phy entries under the main USB entry
Linus Torvalds [Sun, 30 Oct 2022 17:21:42 +0000 (10:21 -0700)]
Merge tag 'gpio-fixes-for-v6.1-rc3' of git://git./linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- convert gpio-tegra to using an immutable irqchip
- MAINTAINERS update
* tag 'gpio-fixes-for-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: Change myself to a maintainer
gpio: tegra: Convert to immutable irq chip
Linus Torvalds [Sun, 30 Oct 2022 16:49:18 +0000 (09:49 -0700)]
Merge tag 'perf_urgent_for_v6.1_rc3' of git://git./linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Rename a perf memory level event define to denote it is of CXL type
- Add Alder and Raptor Lakes support to RAPL
- Make sure raw sample data is output with tracepoints
* tag 'perf_urgent_for_v6.1_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/mem: Rename PERF_MEM_LVLNUM_EXTN_MEM to PERF_MEM_LVLNUM_CXL
perf/x86/rapl: Add support for Intel Raptor Lake
perf/x86/rapl: Add support for Intel AlderLake-N
perf: Fix missing raw data on tracepoint events
Linus Torvalds [Sun, 30 Oct 2022 16:44:06 +0000 (09:44 -0700)]
Merge tag 'loongarch-fixes-6.1-1' of git://git./linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Remove unused kernel stack padding, fix some build errors/warnings and
two bugs in laptop platform driver"
* tag 'loongarch-fixes-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
LoongArch: BPF: Avoid declare variables in switch-case
LoongArch: Use flexible-array member instead of zero-length array
LoongArch: Remove unused kernel stack padding
Linus Torvalds [Sun, 30 Oct 2022 16:40:04 +0000 (09:40 -0700)]
Merge tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
- use after free fix for reconnect race
- two memory leak fixes
* tag '6.1-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix use-after-free caused by invalid pointer `hostname`
cifs: Fix pages leak when writedata alloc failed in cifs_write_from_iter()
cifs: Fix pages array leak when writedata alloc failed in cifs_writedata_alloc()
Linus Torvalds [Sun, 30 Oct 2022 01:33:03 +0000 (18:33 -0700)]
Merge tag 'random-6.1-rc3-for-linus' of git://git./linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"One fix from Jean-Philippe Brucker, addressing a regression in which
early boot code on ARM64 would use the non-_early variant of the
arch_get_random family of functions, resulting in the architectural
random number generator appearing unavailable during that early phase
of boot.
The fix simply changes arch_get_random*() to arch_get_random*_early().
This distinction between these two functions is a bit of an old wart
I'm not a fan of, and for 6.2 I'll see if I can make obsolete the
_early variant, so that one function does the right thing in all
contexts without overhead"
* tag 'random-6.1-rc3-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: use arch_get_random*_early() in random_init()
Linus Torvalds [Sun, 30 Oct 2022 01:12:45 +0000 (18:12 -0700)]
Merge tag 'scsi-fixes' of git://git./linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Varions small fixes, all in drivers.
Some of these arrived during the merge window and got held over to
make sure of testing on the -rc tree.
The biggest change is for standards conformance in the target driver,
closely followed by a set of bug fixes in megaraid_sas"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: ufs: core: Fix typo in comment
scsi: mpi3mr: Select CONFIG_SCSI_SAS_ATTRS
scsi: ufs: core: Fix typo for register name in comments
scsi: pm80xx: Display proc_name in sysfs
scsi: ufs: core: Fix the error log in ufshcd_query_flag_retry()
scsi: ufs: core: Remove unneeded casts from void *
scsi: lpfc: Fix spelling mistake "unsolicted" -> "unsolicited"
scsi: qla2xxx: Use transport-defined speed mask for supported_speeds
scsi: target: iblock: Fold iblock_emulate_read_cap_with_block_size() into iblock_get_blocks()
scsi: qla2xxx: Fix serialization of DCBX TLV data request
scsi: ufs: qcom: Remove redundant dev_err() call
scsi: megaraid_sas: Move megasas_dbg_lvl init to megasas_init()
scsi: megaraid_sas: Remove unnecessary memset()
scsi: megaraid_sas: Simplify megasas_update_device_list
scsi: megaraid_sas: Correct an error message
scsi: megaraid_sas: Correct value passed to scsi_device_lookup()
scsi: target: core: UA on all LUNs after reset
scsi: target: core: New key must be used for moved PR
scsi: target: core: Abort all preempted regs if requested
scsi: target: core: Fix memory leak in preempt_and_abort
...
Linus Torvalds [Sun, 30 Oct 2022 01:06:52 +0000 (18:06 -0700)]
Merge tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- make the multipath dma alignment match the non-multipath one
(Keith Busch)
- fix a bogus use of sg_init_marker() (Nam Cao)
- fix circulr locking in nvme-tcp (Sagi Grimberg)
- Initialization fix for requests allocated via the special hw queue
allocator (John)
- Fix for a regression added in this release with the batched
completions of end_io backed requests (Ming)
- Error handling leak fix for rbd (Yang)
- Error handling leak fix for add_disk() failure (Yu)
* tag 'block-6.1-2022-10-28' of git://git.kernel.dk/linux:
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
blk-mq: don't add non-pt request with ->end_io to batch
rbd: fix possible memory leak in rbd_sysfs_init()
nvme-multipath: set queue dma alignment to 3
nvme-tcp: fix possible circular locking when deleting a controller under memory pressure
nvme-tcp: replace sg_init_marker() with sg_init_table()
block: fix memory leak for elevator on add_disk failure
Linus Torvalds [Sun, 30 Oct 2022 01:01:16 +0000 (18:01 -0700)]
Merge tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux
Pull io_uring fix from Jens Axboe:
"Just a fix for a locking regression introduced with the deferred
task_work running from this merge window"
* tag 'io_uring-6.1-2022-10-28' of git://git.kernel.dk/linux:
io_uring: unlock if __io_run_local_work locked inside
io_uring: use io_run_local_work_locked helper
Linus Torvalds [Sun, 30 Oct 2022 00:49:33 +0000 (17:49 -0700)]
Merge tag 'mm-hotfixes-stable-2022-10-28' of git://git./linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"Eight fix pre-6.0 bugs and the remainder address issues which were
introduced in the 6.1-rc merge cycle, or address issues which aren't
considered sufficiently serious to warrant a -stable backport"
* tag 'mm-hotfixes-stable-2022-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (23 commits)
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
mmap: fix remap_file_pages() regression
mm/shmem: ensure proper fallback if page faults
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
x86: fortify: kmsan: fix KMSAN fortify builds
x86: asm: make sure __put_user_size() evaluates pointer once
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
x86/purgatory: disable KMSAN instrumentation
mm: kmsan: export kmsan_copy_page_meta()
mm: migrate: fix return value if all subpages of THPs are migrated successfully
mm/uffd: fix vma check on userfault for wp
mm: prep_compound_tail() clear page->private
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
mm/page_isolation: fix clang deadcode warning
fs/ext4/super.c: remove unused `deprecated_msg'
ipc/msg.c: fix percpu_counter use after free
memory tier, sysfs: rename attribute "nodes" to "nodelist"
MAINTAINERS: git://github.com -> https://github.com for nilfs2
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
...
Linus Torvalds [Sat, 29 Oct 2022 17:35:17 +0000 (10:35 -0700)]
Merge tag 'powerpc-6.1-3' of git://git./linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix a case of rescheduling with user access unlocked, when preempt is
enabled.
- A follow-up fix for a recent fix, which could lead to IRQ state
assertions firing incorrectly.
- Two fixes for lockdep warnings seen when using kfence with the Hash
MMU.
- Two fixes for preempt warnings seen when using the Hash MMU.
- Two fixes for the VAS coprocessor mechanism used on pseries.
- Prevent building some of our older KVM backends when
CONTEXT_TRACKING_USER is enabled, as it's known to cause crashes.
- A couple of fixes for issues seen with PMU NMIs.
Thanks to Nicholas Piggin, Guenter Roeck, Frederic Barrat Haren Myneni,
Sachin Sant, and Samuel Holland.
* tag 'powerpc-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64s/interrupt: Fix clear of PACA_IRQS_HARD_DIS when returning to soft-masked context
powerpc/64s/interrupt: Perf NMI should not take normal exit path
powerpc/64/interrupt: Prevent NMI PMI causing a dangerous warning
KVM: PPC: BookS PR-KVM and BookE do not support context tracking
powerpc: Fix reschedule bug in KUAP-unlocked user copy
powerpc/64s: Fix hash__change_memory_range preemption warning
powerpc/64s: Disable preemption in hash lazy mmu mode
powerpc/64s: make linear_map_hash_lock a raw spinlock
powerpc/64s: make HPTE lock and native_tlbie_lock irq-safe
powerpc/64s: Add lockdep for HPTE lock
powerpc/pseries: Use lparcfg to reconfig VAS windows for DLPAR CPU
powerpc/pseries/vas: Add VAS IRQ primary handler
Yang Yingliang [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
platform/loongarch: laptop: Fix possible UAF and simplify generic_acpi_laptop_init()
Currently the return value of 'sub_driver->init' is not checked. If
sparse_keymap_setup() called in the init function fails, 'generic_
inputdev' is freed, then it will lead a UAF when using it in generic_
acpi_laptop_init(). Fix it by checking the return value and setting
generic_inputdev to NULL after free, so as to avoid double free it.
The error code in generic_subdriver_init() is always negative, so the
return of generic_subdriver_init() can be simplified.
Fixes:
6246ed09111f ("LoongArch: Add ACPI-based generic laptop driver")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
platform/loongarch: laptop: Adjust resume order for loongson_hotkey_resume()
Some laptops don't support SW_LID, but still have backlight control,
move backlight resuming before SW_LID event handling so as to avoid
backlight mistake due to early return.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Huacai Chen [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
LoongArch: BPF: Avoid declare variables in switch-case
Not all compilers support declare variables in switch-case, so move
declarations to the beginning of a function. Otherwise we may get such
build errors:
arch/loongarch/net/bpf_jit.c: In function ‘emit_atomic’:
arch/loongarch/net/bpf_jit.c:362:3: error: a label can only be part of a statement and a declaration is not a statement
u8 r0 = regmap[BPF_REG_0];
^~
arch/loongarch/net/bpf_jit.c: In function ‘build_insn’:
arch/loongarch/net/bpf_jit.c:727:3: error: a label can only be part of a statement and a declaration is not a statement
u8 t7 = -1;
^~
arch/loongarch/net/bpf_jit.c:778:3: error: a label can only be part of a statement and a declaration is not a statement
int ret;
^~~
arch/loongarch/net/bpf_jit.c:779:3: error: expected expression before ‘u64’
u64 func_addr;
^~~
arch/loongarch/net/bpf_jit.c:780:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
bool func_addr_fixed;
^~~~
arch/loongarch/net/bpf_jit.c:784:11: error: ‘func_addr’ undeclared (first use in this function); did you mean ‘in_addr’?
&func_addr, &func_addr_fixed);
^~~~~~~~~
in_addr
arch/loongarch/net/bpf_jit.c:784:11: note: each undeclared identifier is reported only once for each function it appears in
arch/loongarch/net/bpf_jit.c:814:3: error: a label can only be part of a statement and a declaration is not a statement
u64 imm64 = (u64)(insn + 1)->imm << 32 | (u32)insn->imm;
^~~
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Yushan Zhou [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
LoongArch: Use flexible-array member instead of zero-length array
Eliminate the following coccicheck warning:
./arch/loongarch/include/asm/ptrace.h:32:15-21: WARNING use flexible-array member instead
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Yushan Zhou <katrinzhou@tencent.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Jinyang He [Sat, 29 Oct 2022 08:29:31 +0000 (16:29 +0800)]
LoongArch: Remove unused kernel stack padding
The current LoongArch kernel stack is padded as if obeying the MIPS o32
calling convention (32 bytes), signifying the port's MIPS lineage but no
longer making sense. Remove the padding for clarity.
Reviewed-by: WANG Xuerui <git@xen0n.name>
Signed-off-by: Jinyang He <hejinyang@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Linus Torvalds [Sat, 29 Oct 2022 00:11:26 +0000 (17:11 -0700)]
Merge tag 's390-6.1-3' of git://git./linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Remove outdated linux390 link from MAINTAINERS
- Add few missing EX_TABLE entries to inline assemblies
- Fix raw data collection for pai_ext PMU
- Add kernel image secure boot trailer for future firmware versions
- Fix out-of-bounds access on cio_ignore free
- Fix memory allocation of mdev_types array in vfio-ap
* tag 's390-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vfio-ap: Fix memory allocation for mdev_types array
s390/cio: fix out-of-bounds access on cio_ignore free
s390/pai: fix raw data collection for PMU pai_ext
s390/boot: add secure boot trailer
s390/pci: add missing EX_TABLE entries to __pcistg_mio_inuser()/__pcilg_mio_inuser()
s390/futex: add missing EX_TABLE entry to __futex_atomic_op()
s390/uaccess: add missing EX_TABLE entries to __clear_user()
MAINTAINERS: remove outdated linux390 link
Linus Torvalds [Sat, 29 Oct 2022 00:03:00 +0000 (17:03 -0700)]
Merge tag 'riscv-for-linus-6.1-rc3' of git://git./linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix for a build warning in the jump_label code
- One of the git://github -> https://github cleanups, for the SiFive
drivers
- A fix for the kasan initialization code, this still likely warrants
some cleanups but that's a bigger problem and at least this fixes the
crashes in the short term
- A pair of fixes for extension support detection on mixed LLVM/GNU
toolchains
- A fix for a runtime warning in the /proc/cpuinfo code
* tag 'riscv-for-linus-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Fix /proc/cpuinfo cpumask warning
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
riscv: mm: add missing memcpy in kasan_init
MAINTAINERS: git://github.com -> https://github.com for sifive
riscv: jump_label: mark arguments as const to satisfy asm constraints
Linus Torvalds [Fri, 28 Oct 2022 23:48:29 +0000 (16:48 -0700)]
Merge tag 'acpi-6.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI and device properties fixes from Rafael Wysocki:
"These fix device properties documentation and the ACPI PCC code, add a
new IRQ override quirk for resource handling and add one more item to
the list of device IDs to be ignored when returned by _DEP.
Specifics:
- Fix the documentation of the *_match_string() family of functions
to properly cover the return value (Andy Shevchenko)
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel)
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan)
- Add LATT2021 to the list of device IDs that are ignored when
returned by _DEP, because there are no drivers for them in the
kernel and no plans to add such drivers (Hans de Goede)"
* tag 'acpi-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: scan: Add LATT2021 to acpi_ignore_dep_ids[]
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
ACPI: PCC: Fix unintentional integer overflow
device property: Fix documentation for *_match_string() APIs
Linus Torvalds [Fri, 28 Oct 2022 23:44:12 +0000 (16:44 -0700)]
Merge tag 'pm-6.1-rc3' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These make the intel_pstate driver work as expected on all hybrid
platforms to date (regardless of possible platform firmware issues),
fix hybrid sleep on systems using suspend-to-idle by default, make the
generic power domains code handle disabled idle states properly and
update pm-graph.
Specifics:
- Make intel_pstate use what is known about the hardware instead of
relying on information from the platform firmware (ACPI CPPC in
particular) to establish the relationship between the HWP CPU
performance levels and frequencies on all hybrid platforms
available to date (Rafael Wysocki)
- Allow hybrid sleep to use suspend-to-idle as a system suspend
method if it is the current suspend method of choice (Mario
Limonciello)
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla)
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt)"
* tag 'pm-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: domains: Fix handling of unavailable/disabled idle states
pm-graph v5.10
cpufreq: intel_pstate: hybrid: Use known scaling factor for P-cores
cpufreq: intel_pstate: Read all MSRs on the target CPU
PM: hibernate: Allow hybrid sleep to work with s2idle
Jean-Philippe Brucker [Fri, 28 Oct 2022 16:00:42 +0000 (17:00 +0100)]
random: use arch_get_random*_early() in random_init()
While reworking the archrandom handling, commit
d349ab99eec7 ("random:
handle archrandom with multiple longs") switched to the non-early
archrandom helpers in random_init(), which broke initialization of the
entropy pool from the arm64 random generator.
Indeed at that point the arm64 CPU features, which verify that all CPUs
have compatible capabilities, are not finalized so arch_get_random_seed_longs()
is unsuccessful. Instead random_init() should use the _early functions,
which check only the boot CPU on arm64. On other architectures the
_early functions directly call the normal ones.
Fixes:
d349ab99eec7 ("random: handle archrandom with multiple longs")
Cc: stable@vger.kernel.org
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Sebastian Andrzej Siewior [Wed, 26 Oct 2022 13:48:30 +0000 (15:48 +0200)]
mm: multi-gen LRU: move lru_gen_add_mm() out of IRQ-off region
lru_gen_add_mm() has been added within an IRQ-off region in the commit
mentioned below. The other invocations of lru_gen_add_mm() are not within
an IRQ-off region.
The invocation within IRQ-off region is problematic on PREEMPT_RT because
the function is using a spin_lock_t which must not be used within
IRQ-disabled regions.
The other invocations of lru_gen_add_mm() occur while
task_struct::alloc_lock is acquired. Move lru_gen_add_mm() after
interrupts are enabled and before task_unlock().
Link: https://lkml.kernel.org/r/20221026134830.711887-1-bigeasy@linutronix.de
Fixes:
bd74fdaea1460 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Lukas Bulwahn [Wed, 26 Oct 2022 12:00:29 +0000 (14:00 +0200)]
lib: maple_tree: remove unneeded initialization in mtree_range_walk()
Before the do-while loop in mtree_range_walk(), the variables next, min,
max need to be initialized. The variables last, prev_min and prev_max are
set within the loop body before they are eventually used after exiting the
loop body.
As it is a do-while loop, the loop body is executed at least once, so the
variables last, prev_min and prev_max do not need to be initialized before
the loop body.
Remove unneeded initialization of last and prev_min.
The needless initialization was reported by clang-analyzer as Dead Stores.
As the compiler already identifies these assignments as unneeded, it
optimizes the assignments away. Hence:
No functional change. No change in object code.
Link: https://lkml.kernel.org/r/20221026120029.12555-2-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Liam Howlett [Tue, 25 Oct 2022 16:12:49 +0000 (16:12 +0000)]
mmap: fix remap_file_pages() regression
When using the VMA iterator, the final execution will set the variable
'next' to NULL which causes the function to fail out. Restore the break
in the loop to exit the VMA iterator early without clearing NULL fixes the
issue.
Link: https://lore.kernel.org/lkml/29344.1666681759@jrobl/
Link: https://lkml.kernel.org/r/20221025161222.2634030-1-Liam.Howlett@oracle.com
Fixes:
763ecb035029 (mm: remove the vma linked list)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reported-by: "J. R. Okajima" <hooanon05g@gmail.com>
Tested-by: "J. R. Okajima" <hooanon05g@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ira Weiny [Tue, 25 Oct 2022 22:01:08 +0000 (15:01 -0700)]
mm/shmem: ensure proper fallback if page faults
The kernel test robot flagged a recursive lock as a result of a conversion
from kmap_atomic() to kmap_local_folio()[Link]
The cause was due to the code depending on the kmap_atomic() side effect
of disabling page faults. In that case the code expects the fault to fail
and take the fallback case.
git archaeology implied that the recursion may not be an actual bug.[1]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[2] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur. Add an explicit
pagefault_disable() and a big comment to explain this for future souls
looking at this code.
[1] https://lore.kernel.org/all/Y1MymJ%2FINb45AdaY@iweiny-desk3/
[2] https://lore.kernel.org/lkml/Y1bXBtGTCym77%2FoD@casper.infradead.org/
Link: https://lkml.kernel.org/r/20221025220108.2366043-1-ira.weiny@intel.com
Link: https://lore.kernel.org/r/202210211215.9dc6efb5-yujie.liu@intel.com
Fixes:
7a7256d5f512 ("shmem: convert shmem_mfill_atomic_pte() to use a folio")
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reported-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reported-by: kernel test robot <yujie.liu@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ira Weiny [Mon, 24 Oct 2022 04:34:52 +0000 (21:34 -0700)]
mm/userfaultfd: replace kmap/kmap_atomic() with kmap_local_page()
kmap() and kmap_atomic() are being deprecated in favor of
kmap_local_page() which is appropriate for any thread local context.[1]
A recent locking bug report with userfaultfd showed that the conversion of
the kmap_atomic()'s in those code flows requires care with regard to the
prevention of deadlock.[2]
git archaeology implied that the recursion may not be an actual bug.[3]
However, depending on the implementation of the mmap_lock and the
condition of the call there may still be a deadlock.[4] So this is not
purely a lockdep issue. Considering a single threaded call stack there
are 3 options.
1) Different mm's are in play (no issue)
2) Readlock implementation is recursive and same mm is in play
(no issue)
3) Readlock implementation is _not_ recursive (issue)
The mmap_lock is recursive so with a single thread there is no issue.
However, Matthew pointed out a deadlock scenario when you consider
additional process' and threads thusly.
"The readlock implementation is only recursive if nobody else has taken a
write lock. If you have a multithreaded process, one of the other threads
can call mmap() and that will prevent recursion (due to fairness). Even
if it's a different process that you're trying to acquire the mmap read
lock on, you can still get into a deadly embrace. eg:
process A thread 1 takes read lock on own mmap_lock
process A thread 2 calls mmap, blocks taking write lock
process B thread 1 takes page fault, read lock on own mmap lock
process B thread 2 calls mmap, blocks taking write lock
process A thread 1 blocks taking read lock on process B
process B thread 1 blocks taking read lock on process A
Now all four threads are blocked waiting for each other."
Regardless using pagefault_disable() ensures that no matter what locking
implementation is used a deadlock will not occur.
Complete kmap conversion in userfaultfd by replacing the kmap() and
kmap_atomic() calls with kmap_local_page(). When replacing the
kmap_atomic() call ensure page faults continue to be disabled to support
the correct fall back behavior and add a comment to inform future souls of
the requirement.
[1] https://lore.kernel.org/all/
20220813220034.806698-1-ira.weiny@intel.com/
[2] https://lore.kernel.org/all/Y1Mh2S7fUGQ%2FiKFR@iweiny-desk3/
[3] https://lore.kernel.org/all/Y1MymJ%2FINb45AdaY@iweiny-desk3/
[4] https://lore.kernel.org/lkml/Y1bXBtGTCym77%2FoD@casper.infradead.org/
[ira.weiny@intel.com: v2]
Link: https://lkml.kernel.org/r/20221025220136.2366143-1-ira.weiny@intel.com
Link: https://lkml.kernel.org/r/20221024043452.1491677-1-ira.weiny@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Mon, 24 Oct 2022 21:21:44 +0000 (23:21 +0200)]
x86: fortify: kmsan: fix KMSAN fortify builds
Ensure that KMSAN builds replace memset/memcpy/memmove calls with the
respective __msan_XXX functions, and that none of the macros are redefined
twice. This should allow building kernel with both CONFIG_KMSAN and
CONFIG_FORTIFY_SOURCE.
Link: https://lkml.kernel.org/r/20221024212144.2852069-5-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: Tamas K Lengyel <tamas.lengyel@zentific.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Mon, 24 Oct 2022 21:21:43 +0000 (23:21 +0200)]
x86: asm: make sure __put_user_size() evaluates pointer once
User access macros must ensure their arguments are evaluated only once if
they are used more than once in the macro body. Adding
instrument_put_user() to __put_user_size() resulted in double evaluation
of the `ptr` argument, which led to correctness issues when performing
e.g. unsafe_put_user(..., p++, ...).
To fix those issues, evaluate the `ptr` argument of __put_user_size() at
the beginning of the macro.
Link: https://lkml.kernel.org/r/20221024212144.2852069-4-glider@google.com
Fixes:
888f84a6da4d ("x86: asm: instrument usercopy in get_user() and put_user()")
Signed-off-by: Alexander Potapenko <glider@google.com>
Reported-by: youling257 <youling257@gmail.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Mon, 24 Oct 2022 21:21:42 +0000 (23:21 +0200)]
Kconfig.debug: disable CONFIG_FRAME_WARN for KMSAN by default
KMSAN adds a lot of instrumentation to the code, which results in
increased stack usage (up to 2048 bytes and more in some cases). It's
hard to predict how big the stack frames can be, so we disable the
warnings for KMSAN instead.
Link: https://lkml.kernel.org/r/20221024212144.2852069-3-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Mon, 24 Oct 2022 21:21:41 +0000 (23:21 +0200)]
x86/purgatory: disable KMSAN instrumentation
The stand-alone purgatory.ro does not contain the KMSAN runtime, therefore
it can't be built with KMSAN compiler instrumentation.
Link: https://lkml.kernel.org/r/20221024212144.2852069-2-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Signed-off-by: Alexander Potapenko <glider@google.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Alexander Potapenko [Mon, 24 Oct 2022 21:21:40 +0000 (23:21 +0200)]
mm: kmsan: export kmsan_copy_page_meta()
Certain modules call copy_user_highpage(), which calls
kmsan_copy_page_meta() under KMSAN, so we need to export the latter.
Link: https://lkml.kernel.org/r/20221024212144.2852069-1-glider@google.com
Link: https://github.com/google/kmsan/issues/89
Fixes:
b073d7f8aee4 ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Baolin Wang [Mon, 24 Oct 2022 08:34:21 +0000 (16:34 +0800)]
mm: migrate: fix return value if all subpages of THPs are migrated successfully
During THP migration, if THPs are not migrated but they are split and all
subpages are migrated successfully, migrate_pages() will still return the
number of THP pages that were not migrated. This will confuse the callers
of migrate_pages(). For example, the longterm pinning will failed though
all pages are migrated successfully.
Thus we should return 0 to indicate that all pages are migrated in this
case
Link: https://lkml.kernel.org/r/de386aa864be9158d2f3b344091419ea7c38b2f7.1666599848.git.baolin.wang@linux.alibaba.com
Fixes:
b5bade978e9b ("mm: migrate: fix the return value of migrate_pages()")
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Peter Xu [Mon, 24 Oct 2022 19:33:35 +0000 (15:33 -0400)]
mm/uffd: fix vma check on userfault for wp
We used to have a report that pte-marker code can be reached even when
uffd-wp is not compiled in for file memories, here:
https://lore.kernel.org/all/YzeR+R6b4bwBlBHh@x1n/T/#u
I just got time to revisit this and found that the root cause is we simply
messed up with the vma check, so that for !PTE_MARKER_UFFD_WP system, we
will allow UFFDIO_REGISTER of MINOR & WP upon shmem as the check was
wrong:
if (vm_flags & VM_UFFD_MINOR)
return is_vm_hugetlb_page(vma) || vma_is_shmem(vma);
Where we'll allow anything to pass on shmem as long as minor mode is
requested.
Axel did it right when introducing minor mode but I messed it up in
b1f9e876862d when moving code around. Fix it.
Link: https://lkml.kernel.org/r/20221024193336.1233616-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20221024193336.1233616-2-peterx@redhat.com
Fixes:
b1f9e876862d ("mm/uffd: enable write protection for shmem & hugetlbfs")
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Hugh Dickins [Sat, 22 Oct 2022 07:51:06 +0000 (00:51 -0700)]
mm: prep_compound_tail() clear page->private
Although page allocation always clears page->private in the first page or
head page of an allocation, it has never made a point of clearing
page->private in the tails (though 0 is often what is already there).
But now commit
71e2d666ef85 ("mm/huge_memory: do not clobber swp_entry_t
during THP split") issues a warning when page_tail->private is found to be
non-0 (unless it's swapcache).
Change that warning to dump page_tail (which also dumps head), instead of
just the head: so far we have seen
dead000000000122,
dead000000000003,
dead000000000001 or
0000000000000002 in the raw output for tail private.
We could just delete the warning, but today's consensus appears to want
page->private to be 0, unless there's a good reason for it to be set: so
now clear it in prep_compound_tail() (more general than just for THP; but
not for high order allocation, which makes no pass down the tails).
Link: https://lkml.kernel.org/r/1c4233bb-4e4d-5969-fbd4-96604268a285@google.com
Fixes:
71e2d666ef85 ("mm/huge_memory: do not clobber swp_entry_t during THP split")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Rik van Riel [Fri, 21 Oct 2022 23:28:05 +0000 (19:28 -0400)]
mm,madvise,hugetlb: fix unexpected data loss with MADV_DONTNEED on hugetlbfs
A common use case for hugetlbfs is for the application to create
memory pools backed by huge pages, which then get handed over to
some malloc library (eg. jemalloc) for further management.
That malloc library may be doing MADV_DONTNEED calls on memory
that is no longer needed, expecting those calls to happen on
PAGE_SIZE boundaries.
However, currently the MADV_DONTNEED code rounds up any such
requests to HPAGE_PMD_SIZE boundaries. This leads to undesired
outcomes when jemalloc expects a 4kB MADV_DONTNEED, but 2MB of
memory get zeroed out, instead.
Use of pre-built shared libraries means that user code does not
always know the page size of every memory arena in use.
Avoid unexpected data loss with MADV_DONTNEED by rounding up
only to PAGE_SIZE (in do_madvise), and rounding down to huge
page granularity.
That way programs will only get as much memory zeroed out as
they requested.
Link: https://lkml.kernel.org/r/20221021192805.366ad573@imladris.surriel.com
Fixes:
90e7e7f5ef3f ("mm: enable MADV_DONTNEED for hugetlb mappings")
Signed-off-by: Rik van Riel <riel@surriel.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Maria Yu [Fri, 21 Oct 2022 10:15:55 +0000 (18:15 +0800)]
mm/page_isolation: fix clang deadcode warning
When !CONFIG_VM_BUG_ON, there is warning of
clang-analyzer-deadcode.DeadStores:
Value stored to 'mt' during its initialization is never read.
Link: https://lkml.kernel.org/r/20221021101555.7992-2-quic_aiquny@quicinc.com
Signed-off-by: Maria Yu <quic_aiquny@quicinc.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Doug Berger <opendmb@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Fri, 21 Oct 2022 15:05:49 +0000 (08:05 -0700)]
fs/ext4/super.c: remove unused `deprecated_msg'
fs/ext4/super.c:1744:19: warning: 'deprecated_msg' defined but not used [-Wunused-const-variable=]
Reported-by: kernel test robot <lkp@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Fri, 21 Oct 2022 04:19:22 +0000 (21:19 -0700)]
ipc/msg.c: fix percpu_counter use after free
These percpu counters are referenced in free_ipcs->freeque, so destroy
them later.
Fixes:
72d1e611082e ("ipc/msg: mitigate the lock contention with percpu counter")
Reported-by: syzbot+96e659d35b9d6b541152@syzkaller.appspotmail.com
Tested-by: Mark Rutland <mark.rutland@arm.com>
Cc: Jiebin Sun <jiebin.sun@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Huang Ying [Thu, 20 Oct 2022 01:51:22 +0000 (09:51 +0800)]
memory tier, sysfs: rename attribute "nodes" to "nodelist"
In sysfs, we use attribute name "cpumap" or "cpus" for cpu mask and
"cpulist" or "cpus_list" for cpu list. For example, in my system,
$ cat /sys/devices/system/node/node0/cpumap
f,
ffffffff
$ cat /sys/devices/system/cpu/cpu2/topology/core_cpus
0,
00100004
$ cat cat /sys/devices/system/node/node0/cpulist
0-35
$ cat /sys/devices/system/cpu/cpu2/topology/core_cpus_list
2,20
It looks reasonable to use "nodemap" for node mask and "nodelist" for
node list. So, rename the attribute to follow the naming convention.
Link: https://lkml.kernel.org/r/20221020015122.290097-1-ying.huang@intel.com
Fixes:
9832fb87834e2b ("mm/demotion: expose memory tier details via sysfs")
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Wei Xu <weixugc@google.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Bharata B Rao <bharata@amd.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hesham Almatary <hesham.almatary@huawei.com>
Cc: Jagdish Gediya <jvgediya.oss@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tim Chen <tim.c.chen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Palmer Dabbelt [Thu, 20 Oct 2022 02:42:55 +0000 (11:42 +0900)]
MAINTAINERS: git://github.com -> https://github.com for nilfs2
Github deprecated the git:// links about a year ago, so let's move to the
https:// URLs instead.
Link: https://lkml.kernel.org/r/20221020024255.5000-1-konishi.ryusuke@gmail.com
Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/
Link: https://lkml.kernel.org/r/20221013214638.30933-1-palmer@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Waiman Long [Thu, 20 Oct 2022 17:56:19 +0000 (13:56 -0400)]
mm/kmemleak: prevent soft lockup in kmemleak_scan()'s object iteration loops
Commit
6edda04ccc7c ("mm/kmemleak: prevent soft lockup in first object
iteration loop of kmemleak_scan()") adds cond_resched() in the first
object iteration loop of kmemleak_scan(). However, it turns that the 2nd
objection iteration loop can still cause soft lockup to happen in some
cases. So add a cond_resched() call in the 2nd and 3rd loops as well to
prevent that and for completeness.
Link: https://lkml.kernel.org/r/20221020175619.366317-1-longman@redhat.com
Fixes:
6edda04ccc7c ("mm/kmemleak: prevent soft lockup in first object iteration loop of kmemleak_scan()")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Phillip Lougher [Thu, 20 Oct 2022 22:36:16 +0000 (23:36 +0100)]
squashfs: fix buffer release race condition in readahead code
Fix a buffer release race condition, where the error value was used after
release.
Link: https://lkml.kernel.org/r/20221020223616.7571-4-phillip@squashfs.org.uk
Fixes:
b09a7a036d20 ("squashfs: support reading fragments in readahead call")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Slade Watkins <srw@sladewatkins.net>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Phillip Lougher [Thu, 20 Oct 2022 22:36:15 +0000 (23:36 +0100)]
squashfs: fix extending readahead beyond end of file
The readahead code will try to extend readahead to the entire size of the
Squashfs data block.
But, it didn't take into account that the last block at the end of the
file may not be a whole block. In this case, the code would extend
readahead to beyond the end of the file, leaving trailing pages.
Fix this by only requesting the expected number of pages.
Link: https://lkml.kernel.org/r/20221020223616.7571-3-phillip@squashfs.org.uk
Fixes:
8fc78b6fe24c ("squashfs: implement readahead")
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Cc: Slade Watkins <srw@sladewatkins.net>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Phillip Lougher [Thu, 20 Oct 2022 22:36:14 +0000 (23:36 +0100)]
squashfs: fix read regression introduced in readahead code
Patch series "squashfs: fix some regressions introduced in the readahead
code".
This patchset fixes 3 regressions introduced by the recent readahead code
changes. The first regression is causing "snaps" to randomly fail after a
couple of hours or days, which how the regression came to light.
This patch (of 3):
If a file isn't a whole multiple of the page size, the last page will have
trailing bytes unfilled.
There was a mistake in the readahead code which did this. In particular
it incorrectly assumed that the last page in the readahead page array
(page[nr_pages - 1]) will always contain the last page in the block, which
if we're at file end, will be the page that needs to be zero filled.
But the readahead code may not return the last page in the block, which
means it is unmapped and will be skipped by the decompressors (a temporary
buffer used).
In this case the zero filling code will zero out the wrong page, leading
to data corruption.
Fix this by by extending the "page actor" to return the last page if
present, or NULL if a temporary buffer was used.
Link: https://lkml.kernel.org/r/20221020223616.7571-1-phillip@squashfs.org.uk
Link: https://lkml.kernel.org/r/20221020223616.7571-2-phillip@squashfs.org.uk
Fixes:
8fc78b6fe24c ("squashfs: implement readahead")
Link: https://lore.kernel.org/lkml/b0c258c3-6dcf-aade-efc4-d62a8b3a1ce2@alu.unizg.hr/
Signed-off-by: Phillip Lougher <phillip@squashfs.org.uk>
Reported-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Tested-by: Slade Watkins <srw@sladewatkins.net>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Reported-by: Marc Miltenberger <marcmiltenberger@gmail.com>
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Cc: Hsin-Yi Wang <hsinyi@chromium.org>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Linus Torvalds [Fri, 28 Oct 2022 20:24:57 +0000 (13:24 -0700)]
Merge tag 'rtc-6.1-fixes' of git://git./linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Fix wakeup support that broke on multiple platforms"
* tag 'rtc-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: cmos: fix build on non-ACPI platforms
rtc: cmos: Fix wake alarm breakage
Linus Torvalds [Fri, 28 Oct 2022 20:00:54 +0000 (13:00 -0700)]
Merge tag 'mmc-v6.1-rc1' of git://git./linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Cancel recovery work on cleanup to avoid NULL pointer dereference
- Fix error path in the read/write error recovery path
- Fix kernel panic when remove non-standard SDIO card
- Fix WRITE_ZEROES handling for CQE
MMC host:
- sdhci_am654: Fixup Kconfig dependency for REGMAP_MMIO
- sdhci-esdhc-imx: Avoid warning of misconfigured bus-width
- sdhci-pci: Disable broken HS400 ES mode for ASUS BIOS on Jasper
Lake"
* tag 'mmc-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci_am654: 'select', not 'depends' REGMAP_MMIO
mmc: core: Fix WRITE_ZEROES CQE handling
mmc: core: Fix kernel panic when remove non-standard SDIO card
mmc: sdhci-pci-core: Disable ES for ASUS BIOS on Jasper Lake
mmc: sdhci-esdhc-imx: Propagate ESDHC_FLAG_HS400* only on 8bit bus
mmc: queue: Cancel recovery work on cleanup
mmc: block: Remove error check of hw_reset on reset
Linus Torvalds [Fri, 28 Oct 2022 19:24:19 +0000 (12:24 -0700)]
Merge tag 'mtd/fixes-for-6.1-rc3' of git://git./linux/kernel/git/mtd/linux
Pull mtd fixes from Miquel Raynal:
"MTD core:
- partitions: Add missing of_node_get() in dynamic partitions code
Parser drivers:
- bcm47xxpart: Fix halfblock reads
Raw NAND controller drivers:
- marvell: Use correct logic for nand-keep-config
- tegra: Fix PM disable depth imbalance in probe
- intel: Add missing of_node_put() in ebu_nand_probe()
SPI-NOR core changes:
- Ignore -ENOTSUPP in spi_nor_init()"
* tag 'mtd/fixes-for-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: parsers: bcm47xxpart: Fix halfblock reads
mtd: rawnand: marvell: Use correct logic for nand-keep-config
mtd: rawnand: tegra: Fix PM disable depth imbalance in probe
mtd: rawnand: intel: Add missing of_node_put() in ebu_nand_probe()
mtd: core: add missing of_node_get() in dynamic partitions code
mtd: spi-nor: core: Ignore -ENOTSUPP in spi_nor_init()
Linus Torvalds [Fri, 28 Oct 2022 19:20:31 +0000 (12:20 -0700)]
Merge tag 'sound-6.1-rc3' of git://git./linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- fixes for regressions by the recent ALSA control hash usages
- fixes for UAF with del_timer() at removals in a few drivers
- char signedness fixes
- a few memory leak fixes in error paths
- device-specific fixes / quirks for Intel SOF, AMD, HD-audio,
USB-audio, and various ASoC codecs"
* tag 'sound-6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (50 commits)
ALSA: aoa: Fix I2S device accounting
ALSA: Use del_timer_sync() before freeing timer
ALSA: aoa: i2sbus: fix possible memory leak in i2sbus_add_dev()
ALSA: rme9652: use explicitly signed char
ALSA: au88x0: use explicitly signed char
ALSA: hda/realtek: Add another HP ZBook G9 model quirks
ALSA: usb-audio: Add quirks for M-Audio Fast Track C400/600
ASoC: SOF: Intel: hda-codec: fix possible memory leak in hda_codec_device_init()
ASoC: amd: yc: Add Lenovo Thinkbook 14+ 2022 21D0 to quirks table
ASoC: Intel: Skylake: fix possible memory leak in skl_codec_device_init()
ALSA: ac97: Use snd_ctl_rename() to rename a control
ALSA: ca0106: Use snd_ctl_rename() to rename a control
ALSA: emu10k1: Use snd_ctl_rename() to rename a control
ALSA: hda/realtek: Use snd_ctl_rename() to rename a control
ALSA: usb-audio: Use snd_ctl_rename() to rename a control
ALSA: control: add snd_ctl_rename()
ALSA: ac97: fix possible memory leak in snd_ac97_dev_register()
ASoC: SOF: Intel: pci-tgl: fix ADL-N descriptor
ASoC: qcom: lpass-cpu: Mark HDMI TX parity register as volatile
ASoC: amd: yc: Adding Lenovo ThinkBook 14 Gen 4+ ARA and Lenovo ThinkBook 16 Gen 4+ ARA to the Quirks List
...
Linus Torvalds [Fri, 28 Oct 2022 19:10:43 +0000 (12:10 -0700)]
Merge tag 'drm-fixes-2022-10-28' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regularly scheduled fixes for drm, live from a Red Hat office for the
first time in a while.
The core has two fixes, one for scheduler leak and one for aperture
uninit read.
Otherwise a single bridge fix, and msm, amdgpu/kfd and i915 have a set
of fixes each.
sched:
- Stop leaking fences when killing a sched entity.
aperture:
- Avoid uninitialized read in aperture_remove_conflicting_pci_device()
bridge:
- Fix HPD on bridge/ps8640.
msm:
- Fix shrinker deadlock
- Fix crash during suspend after unbind
- Fix IRQ lifetime issues
- Fix potential memory corruption with too many bridges
- Fix memory corruption on GPU state capture
amdgpu:
- Stable pstate fix
- SMU 13.x updates
- SR-IOV fixes
- PCI AER fix
- GC 11.x fixes
- Display fixes
- Expose IMU firmware version for debugging
- Plane modifier fix
- S0i3 fix
amdkfd:
- Fix possible memory leak
- Fix GC 10.x cache info reporting
i915:
- Extend Wa_1607297627 to Alderlake-P
- Keep PCI autosuspend control 'on' by default on all dGPU
- Reset frl trained flag before restarting FRL training"
* tag 'drm-fixes-2022-10-28' of git://anongit.freedesktop.org/drm/drm: (39 commits)
fbdev/core: Avoid uninitialized read in aperture_remove_conflicting_pci_device()
drm/amdgpu: disallow gfxoff until GC IP blocks complete s2idle resume
drm/scheduler: fix fence ref counting
drm/amd/display: Revert logic for plane modifiers
drm/amdkfd: correct the cache info for gfx1036
drm/amdkfd: update gfx1037 Lx cache setting
drm/amdgpu: skip mes self test for gc 11.0.3 in recover
drm/amd: Add IMU fw version to fw version queries
drm/amd/display: Don't return false if no stream
drm/amd/display: Remove wrong pipe control lock
drm/amd/pm: allow gfxoff on gc_11_0_3
drm/amdkfd: Fix memory leak in kfd_mem_dmamap_userptr()
drm/amdgpu: Remove ATC L2 access for MMHUB 2.1.x
drm/i915/dp: Reset frl trained flag before restarting FRL training
drm/i915/dgfx: Keep PCI autosuspend control 'on' by default on all dGPU
drm/i915: Extend Wa_1607297627 to Alderlake-P
drm/amdgpu: Adjust MES polling timeout for sriov
drm/amd/pm: update driver-if header for smu_v13_0_10
drm/amdgpu: fix pstate setting issue
drm/bridge: ps8640: Add back the 50 ms mystery delay after HPD
...
Linus Torvalds [Fri, 28 Oct 2022 16:53:30 +0000 (09:53 -0700)]
Merge tag 'v6.1-p3' of git://git./linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/polyval"
* tag 'v6.1-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/polyval - Fix crashes when keys are not 16-byte aligned
Matti Vaittinen [Fri, 28 Oct 2022 05:15:45 +0000 (08:15 +0300)]
MAINTAINERS: Change myself to a maintainer
After some off-list discussion with Marek Vasut and Geert Uytterhoeven
and finally a kx022a driver related discussion with Joe Perches
https://lore.kernel.org/lkml/
92c3f72e60bc99bf4a21da259b4d78c1bdca447d.camel@perches.com/
it seems that my status as a reviewer has been wrong. I do look after
the ROHM/Kionix drivers I've authored and currently I am also paid to do
so as is reflected by the 'S: Supported'. According to Joe, the reviewer
entry in MAINTAINERS do not indicate such level of support and having a
reviewer supporting an IC is a contradiction.
Switch undersigned from a reviewer to a maintainer for IC drivers I am
taking care of.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Rafael J. Wysocki [Fri, 28 Oct 2022 14:37:02 +0000 (16:37 +0200)]
Merge branches 'acpi-resource', 'acpi-pcc' and 'devprop'
Merge an IRQ override quirk, an ACPI PCC code fix and a device
properties documentation update for 6.1-rc3:
- Make the ACPI device resources code skip IRQ override on Asus
Vivobook S5602ZA (Tamim Khan).
- Fix a possible integer overflow during multiplication in the ACPI
PCC code (Manank Patel).
- Fix the documentation of the *_match_string() family of functions to
properly cover the return value (Andy Shevchenko).
* acpi-resource:
ACPI: resource: Skip IRQ override on Asus Vivobook S5602ZA
* acpi-pcc:
ACPI: PCC: Fix unintentional integer overflow
* devprop:
device property: Fix documentation for *_match_string() APIs
Rafael J. Wysocki [Fri, 28 Oct 2022 14:31:25 +0000 (16:31 +0200)]
Merge branches 'pm-sleep', 'pm-domains' and 'pm-tools'
Merge a hiberantion-related fix, a generic power domains code fix and
a pm-graph update for 6.1-rc1:
- Allow hybrid sleep to use suspend-to-idle as a system suspend method
if it is the current suspend method of choice (Mario Limonciello).
- Fix handling of unavailable/disabled idle states in the generic
power domains code (Sudeep Holla).
- Update the pm-graph suite of utilities to version 5.10 which is
fixes-mostly and does not add any new features (Todd Brandt).
* pm-sleep:
PM: hibernate: Allow hybrid sleep to work with s2idle
* pm-domains:
PM: domains: Fix handling of unavailable/disabled idle states
* pm-tools:
pm-graph v5.10
John Garry [Wed, 26 Oct 2022 10:35:13 +0000 (18:35 +0800)]
blk-mq: Properly init requests from blk_mq_alloc_request_hctx()
Function blk_mq_alloc_request_hctx() is missing zeroing/init of rq->bio,
biotail, __sector, and __data_len members, which blk_mq_alloc_request()
has, so duplicate what we do in blk_mq_alloc_request().
Fixes:
1f5bd336b9150 ("blk-mq: add blk_mq_alloc_request_hctx")
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/1666780513-121650-1-git-send-email-john.garry@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zeng Heng [Thu, 27 Oct 2022 12:45:28 +0000 (20:45 +0800)]
cifs: fix use-after-free caused by invalid pointer `hostname`
`hostname` needs to be set as null-pointer after free in
`cifs_put_tcp_session` function, or when `cifsd` thread attempts
to resolve hostname and reconnect the host, the thread would deref
the invalid pointer.
Here is one of practical backtrace examples as reference:
Task 477
---------------------------
do_mount
path_mount
do_new_mount
vfs_get_tree
smb3_get_tree
smb3_get_tree_common
cifs_smb3_do_mount
cifs_mount
mount_put_conns
cifs_put_tcp_session
--> kfree(server->hostname)
cifsd
---------------------------
kthread
cifs_demultiplex_thread
cifs_reconnect
reconn_set_ipaddr_from_hostname
--> if (!server->hostname)
--> if (server->hostname[0] == '\0') // !! UAF fault here
CIFS: VFS: cifs_mount failed w/return code = -112
mount error(112): Host is down
BUG: KASAN: use-after-free in reconn_set_ipaddr_from_hostname+0x2ba/0x310
Read of size 1 at addr
ffff888108f35380 by task cifsd/480
CPU: 2 PID: 480 Comm: cifsd Not tainted 6.1.0-rc2-00106-gf705792f89dd-dirty #25
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0x85
print_report+0x16c/0x4a3
kasan_report+0x95/0x190
reconn_set_ipaddr_from_hostname+0x2ba/0x310
__cifs_reconnect.part.0+0x241/0x800
cifs_reconnect+0x65f/0xb60
cifs_demultiplex_thread+0x1570/0x2570
kthread+0x2c5/0x380
ret_from_fork+0x22/0x30
</TASK>
Allocated by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7e/0x90
__kmalloc_node_track_caller+0x52/0x1b0
kstrdup+0x3b/0x70
cifs_get_tcp_session+0xbc/0x19b0
mount_get_conns+0xa9/0x10c0
cifs_mount+0xdf/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Freed by task 477:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x10a/0x190
__kmem_cache_free+0xca/0x3f0
cifs_put_tcp_session+0x30c/0x450
cifs_mount+0xf95/0x1970
cifs_smb3_do_mount+0x295/0x1660
smb3_get_tree+0x352/0x5e0
vfs_get_tree+0x8e/0x2e0
path_mount+0xf8c/0x1990
do_mount+0xee/0x110
__x64_sys_mount+0x14b/0x1f0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The buggy address belongs to the object at
ffff888108f35380
which belongs to the cache kmalloc-16 of size 16
The buggy address is located 0 bytes inside of
16-byte region [
ffff888108f35380,
ffff888108f35390)
The buggy address belongs to the physical page:
page:
00000000333f8e58 refcount:1 mapcount:0 mapping:
0000000000000000 index:0xffff888108f350e0 pfn:0x108f35
flags: 0x200000000000200(slab|node=0|zone=2)
raw:
0200000000000200 0000000000000000 dead000000000122 ffff8881000423c0
raw:
ffff888108f350e0 000000008080007a 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888108f35280: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
ffff888108f35300: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
>
ffff888108f35380: fa fb fc fc fa fb fc fc fa fb fc fc fa fb fc fc
^
ffff888108f35400: fa fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888108f35480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
Fixes:
7be3248f3139 ("cifs: To match file servers, make sure the server hostname matches")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Dave Airlie [Fri, 28 Oct 2022 02:58:33 +0000 (12:58 +1000)]
Merge tag 'drm-misc-fixes-2022-10-27' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v6.1-rc3:
- Fix HPD on bridge/ps8640.
- Stop leaking fences when killing a sched entity.
- Avoid uninitialized read in aperture_remove_conflicting_pci_device()
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed24cbd2-2bcb-d2c2-46ed-9d8ea9615879@linux.intel.com
Dave Airlie [Fri, 28 Oct 2022 02:57:18 +0000 (12:57 +1000)]
Merge tag 'drm-intel-fixes-2022-10-27-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Extend Wa_1607297627 to Alderlake-P (José Roberto de Souza)
- Keep PCI autosuspend control 'on' by default on all dGPU (Anshuman Gupta)
- Reset frl trained flag before restarting FRL training (Ankit Nautiyal)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Y1o+teE2Z11pT1MN@tursulin-desk
Andrew Jones [Fri, 14 Oct 2022 15:58:44 +0000 (17:58 +0200)]
RISC-V: Fix /proc/cpuinfo cpumask warning
Commit
78e5a3399421 ("cpumask: fix checking valid cpu range") has
started issuing warnings[*] when cpu indices equal to nr_cpu_ids - 1
are passed to cpumask_next* functions. seq_read_iter() and cpuinfo's
start and next seq operations implement a pattern like
n = cpumask_next(n - 1, mask);
show(n);
while (1) {
++n;
n = cpumask_next(n - 1, mask);
if (n >= nr_cpu_ids)
break;
show(n);
}
which will issue the warning when reading /proc/cpuinfo. Ensure no
warning is generated by validating the cpu index before calling
cpumask_next().
[*] Warnings will only appear with DEBUG_PER_CPU_MAPS enabled.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20221014155845.1986223-2-ajones@ventanamicro.com/
Fixes:
78e5a3399421 ("cpumask: fix checking valid cpu range")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Palmer Dabbelt [Thu, 27 Oct 2022 22:09:50 +0000 (15:09 -0700)]
Merge patch series "Fix RISC-V toolchain extension support detection"
Conor Dooley <conor@kernel.org> says:
From: Conor Dooley <conor.dooley@microchip.com>
This came up due to a report from Kevin @ kernel-ci, who had been
running a mixed configuration of GNU binutils and clang. Their compiler
was relatively recent & supports Zicbom but binutils @ 2.35.2 did not.
Our current checks for extension support only cover the compiler, but it
appears to me that we need to check both the compiler & linker support
in case of "pot-luck" configurations that mix different versions of
LD,AS,CC etc.
Linker support does not seem possible to actually check, since the ISA
string is emitted into the object files - so I put in version checks for
that. The checks have gotten a bit ugly since 32 & 64 bit support need
to be checked independently but ahh well.
As I was going, I fell into the trap of there being duplicated checks
for CC support in both the Makefile and Kconfig, so as part of renaming
the Kconfig symbol to TOOLCHAIN_HAS_FOO, I dropped the extra checks in
the Makefile. This has the added advantage of the TOOLCHAIN_HAS_FOO
symbol for Zihintpause appearing in .config.
I pushed out a version of this that specificly checked for assember
support for LKP to test & it looked /okay/ - but I did some more testing
today and realised that this is redudant & have since dropped the as
check.
I tested locally with a fair few different combinations, to try and
cover each of AS, LD, CC missing support for the extension.
* b4-shazam-merge:
riscv: fix detection of toolchain Zihintpause support
riscv: fix detection of toolchain Zicbom support
Link: https://lore.kernel.org/r/20221006173520.1785507-1-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley [Thu, 6 Oct 2022 17:35:21 +0000 (18:35 +0100)]
riscv: fix detection of toolchain Zihintpause support
It is not sufficient to check if a toolchain supports a particular
extension without checking if the linker supports that extension
too. For example, Clang 15 supports Zihintpause but GNU bintutils
2.35.2 does not, leading build errors like so:
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zihintpause'
Add a TOOLCHAIN_HAS_ZIHINTPAUSE which checks if each of the compiler,
assembler and linker support the extension. Replace the ifdef in the
vdso with one depending on this new symbol.
Fixes:
8eb060e10185 ("arch/riscv: add Zihintpause support")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221006173520.1785507-3-conor@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Conor Dooley [Thu, 6 Oct 2022 17:35:20 +0000 (18:35 +0100)]
riscv: fix detection of toolchain Zicbom support
It is not sufficient to check if a toolchain supports a particular
extension without checking if the linker supports that extension too.
For example, Clang 15 supports Zicbom but GNU bintutils 2.35.2 does
not, leading build errors like so:
riscv64-linux-gnu-ld: -march=rv64i2p0_m2p0_a2p0_c2p0_zicbom1p0_zihintpause2p0: Invalid or unknown z ISA extension: 'zicbom'
Convert CC_HAS_ZICBOM to TOOLCHAIN_HAS_ZICBOM & check if the linker
also supports Zicbom.
Reported-by: Kevin Hilman <khilman@baylibre.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1714
Link: https://storage.kernelci.org/next/master/next-20220920/riscv/defconfig+CONFIG_EFI=n/clang-16/logs/kernel.log
Fixes:
1631ba1259d6 ("riscv: Add support for non-coherent devices using zicbom extension")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20221006173520.1785507-2-conor@kernel.org
[Palmer: Check for ld-2.38, not 2.39, as 2.38 no longer errors.]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Qinglin Pan [Sun, 9 Oct 2022 08:30:50 +0000 (16:30 +0800)]
riscv: mm: add missing memcpy in kasan_init
Hi Atish,
It seems that the panic is due to the missing memcpy during kasan_init.
Could you please check whether this patch is helpful?
When doing kasan_populate, the new allocated base_pud/base_p4d should
contain kasan_early_shadow_{pud, p4d}'s content. Add the missing memcpy
to avoid page fault when read/write kasan shadow region.
Tested on:
- qemu with sv57 and CONFIG_KASAN on.
- qemu with sv48 and CONFIG_KASAN on.
Signed-off-by: Qinglin Pan <panqinglin2020@iscas.ac.cn>
Tested-by: Atish Patra <atishp@rivosinc.com>
Fixes:
8fbdccd2b173 ("riscv: mm: Support kasan for sv57")
Link: https://lore.kernel.org/r/20221009083050.3814850-1-panqinglin2020@iscas.ac.cn
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Linus Torvalds [Thu, 27 Oct 2022 20:36:59 +0000 (13:36 -0700)]
Merge tag 'net-6.1-rc3-2' of git://git./linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from 802.15.4 (Zigbee et al).
Current release - regressions:
- ipa: fix bugs in the register conversion for IPA v3.1 and v3.5.1
Current release - new code bugs:
- mptcp: fix abba deadlock on fastopen
- eth: stmmac: rk3588: allow multiple gmac controllers in one system
Previous releases - regressions:
- ip: rework the fix for dflt addr selection for connected nexthop
- net: couple more fixes for misinterpreting bits in struct page
after the signature was added
Previous releases - always broken:
- ipv6: ensure sane device mtu in tunnels
- openvswitch: switch from WARN to pr_warn on a user-triggerable path
- ethtool: eeprom: fix null-deref on genl_info in dump
- ieee802154: more return code fixes for corner cases in
dgram_sendmsg
- mac802154: fix link-quality-indicator recording
- eth: mlx5: fixes for IPsec, PTP timestamps, OvS and conntrack
offload
- eth: fec: limit register access on i.MX6UL
- eth: bcm4908_enet: update TX stats after actual transmission
- can: rcar_canfd: improve IRQ handling for RZ/G2L
Misc:
- genetlink: piggy back on the newly added resv_op_start to enforce
more sanity checks on new commands"
* tag 'net-6.1-rc3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
net: enetc: survive memory pressure without crashing
kcm: do not sense pfmemalloc status in kcm_sendpage()
net: do not sense pfmemalloc status in skb_append_pagefrags()
net/mlx5e: Fix macsec sci endianness at rx sa update
net/mlx5e: Fix wrong bitwise comparison usage in macsec_fs_rx_add_rule function
net/mlx5e: Fix macsec rx security association (SA) update/delete
net/mlx5e: Fix macsec coverity issue at rx sa update
net/mlx5: Fix crash during sync firmware reset
net/mlx5: Update fw fatal reporter state on PCI handlers successful recover
net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed
net/mlx5e: TC, Reject forwarding from internal port to internal port
net/mlx5: Fix possible use-after-free in async command interface
net/mlx5: ASO, Create the ASO SQ with the correct timestamp format
net/mlx5e: Update restore chain id for slow path packets
net/mlx5e: Extend SKB room check to include PTP-SQ
net/mlx5: DR, Fix matcher disconnect error flow
net/mlx5: Wait for firmware to enable CRS before pci_restore_state
net/mlx5e: Do not increment ESN when updating IPsec ESN state
netdevsim: remove dir in nsim_dev_debugfs_init() when creating ports dir failed
netdevsim: fix memory leak in nsim_drv_probe() when nsim_dev_resources_register() failed
...
Linus Torvalds [Thu, 27 Oct 2022 20:16:36 +0000 (13:16 -0700)]
Merge tag 'execve-v6.1-rc3' of git://git./linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix an ancient signal action copy race (Bernd Edlinger)
- Fix a memory leak in ELF loader, when under memory pressure (Li
Zetao)
* tag 'execve-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
fs/binfmt_elf: Fix memory leak in load_elf_binary()
exec: Copy oldsighand->action under spin-lock
Linus Torvalds [Thu, 27 Oct 2022 19:31:57 +0000 (12:31 -0700)]
Merge tag 'hardening-v6.1-rc3' of git://git./linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Fix older Clang vs recent overflow KUnit test additions (Nick
Desaulniers, Kees Cook)
- Fix kern-doc visibility for overflow helpers (Kees Cook)
* tag 'hardening-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
overflow: Refactor test skips for Clang-specific issues
overflow: disable failing tests for older clang versions
overflow: Fix kern-doc markup for functions
Linus Torvalds [Thu, 27 Oct 2022 19:21:57 +0000 (12:21 -0700)]
Merge tag 'media/v6.1-3' of git://git./linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"A bunch of patches addressing issues in the vivid driver and adding
new checks in V4L2 to validate the input parameters from some ioctls"
* tag 'media/v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: vivid.rst: loop_video is set on the capture devnode
media: vivid: set num_in/outputs to 0 if not supported
media: vivid: drop GFP_DMA32
media: vivid: fix control handler mutex deadlock
media: videodev2.h: V4L2_DV_BT_BLANKING_HEIGHT should check 'interlaced'
media: v4l2-dv-timings: add sanity checks for blanking values
media: vivid: dev->bitmap_cap wasn't freed in all cases
media: vivid: s_fbuf: add more sanity checks
Linus Torvalds [Thu, 27 Oct 2022 18:44:18 +0000 (11:44 -0700)]
Merge tag 'fscrypt-for-linus' of git://git./fs/fscrypt/fscrypt
Pull fscrypt fix from Eric Biggers:
"Fix a memory leak that was introduced by a change that went into -rc1"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fscrypt: fix keyring memory leak on mount failure