review.tizen.org Git - platform/kernel/linux-rpi.git/log

drm/meson: dw-hdmi: Ensure that clocks are enabled before touching the TOP registers

Removing the meson-dw-hdmi module and re-inserting it results in a hang
as the driver writes to HDMITX_TOP_SW_RESET. Similar effects can be seen
when booting with mainline u-boot and using the u-boot provided DT (which
is highly desirable).

The reason for the hang seem to be that the clocks are not always
enabled by the time we enter meson_dw_hdmi_init(). Moving this call
*after* dw_hdmi_probe() ensures that the clocks are enabled.

Fixes: 1374b8375c2e ("drm/meson: dw_hdmi: add resume/suspend hooks")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-5-maz@kernel.org

drm/meson: dw-hdmi: Register a callback to disable the regulator

Removing the meson-dw-hdmi module results in the following splat:

i[   43.340509] WARNING: CPU: 0 PID: 572 at drivers/regulator/core.c:2125 _regulator_put.part.0+0x16c/0x174
[...]
[   43.454870] CPU: 0 PID: 572 Comm: modprobe Tainted: G        W   E     5.10.0-rc4-00049-gd274813a4de3-dirty #2147
[   43.465042] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   43.471945] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[   43.477896] pc : _regulator_put.part.0+0x16c/0x174
[   43.482638] lr : regulator_put+0x44/0x60
[...]
[   43.568715] Call trace:
[   43.571132]  _regulator_put.part.0+0x16c/0x174
[   43.575529]  regulator_put+0x44/0x60
[   43.579067]  devm_regulator_release+0x20/0x2c
[   43.583380]  release_nodes+0x1c8/0x2b4
[   43.587087]  devres_release_all+0x44/0x6c
[   43.591056]  __device_release_driver+0x1a0/0x23c
[   43.595626]  driver_detach+0xcc/0x160
[   43.599249]  bus_remove_driver+0x68/0xe0
[   43.603130]  driver_unregister+0x3c/0x6c
[   43.607011]  platform_driver_unregister+0x20/0x2c
[   43.611678]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   43.618485]  __arm64_sys_delete_module+0x1bc/0x294

as the HDMI regulator is still enabled on release.

In order to address this, register a callback that will deal with
the disabling when the driver is unbound, solving the problem.

Fixes: 161a803fe32d ("drm/meson: dw_hdmi: Add support for an optional external 5V regulator")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-4-maz@kernel.org

drm/meson: Unbind all connectors on module removal

Removing the meson DRM module results in the following splats:

[   42.689228] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_irq.c:192 drm_irq_uninstall+0x130/0x160 [drm]
[...]
[   42.812820] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   42.819723] pstate: 80400089 (Nzcv daIf +PAN -UAO -TCO BTYPE=--)
[   42.825737] pc : drm_irq_uninstall+0x130/0x160 [drm]
[   42.830647] lr : drm_irq_uninstall+0xc4/0x160 [drm]
[...]
[   42.917614] Call trace:
[   42.920086]  drm_irq_uninstall+0x130/0x160 [drm]
[   42.924612]  meson_drv_unbind+0x68/0xa4 [meson_drm]
[   42.929436]  component_del+0xc0/0x180
[   42.933058]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[   42.938576]  platform_drv_remove+0x38/0x60
[   42.942628]  __device_release_driver+0x190/0x23c
[   42.947198]  driver_detach+0xcc/0x160
[   42.950822]  bus_remove_driver+0x68/0xe0
[   42.954702]  driver_unregister+0x3c/0x6c
[   42.958583]  platform_driver_unregister+0x20/0x2c
[   42.963243]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   42.970057]  __arm64_sys_delete_module+0x1bc/0x294
[   42.974801]  el0_svc_common.constprop.0+0x80/0x240
[   42.979542]  do_el0_svc+0x30/0xa0
[   42.982821]  el0_svc+0x18/0x50
[   42.985839]  el0_sync_handler+0x198/0x404
[   42.989806]  el0_sync+0x158/0x180

immediatelly followed by

[   43.002296] WARNING: CPU: 0 PID: 572 at drivers/gpu/drm/drm_mode_config.c:504 drm_mode_config_cleanup+0x2a8/0x304 [drm]
[...]
[   43.128150] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[   43.135052] pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[   43.141062] pc : drm_mode_config_cleanup+0x2a8/0x304 [drm]
[   43.146492] lr : drm_mode_config_cleanup+0xac/0x304 [drm]
[...]
[   43.233979] Call trace:
[   43.236451]  drm_mode_config_cleanup+0x2a8/0x304 [drm]
[   43.241538]  drm_mode_config_init_release+0x1c/0x2c [drm]
[   43.246886]  drm_managed_release+0xa8/0x120 [drm]
[   43.251543]  drm_dev_put+0x94/0xc0 [drm]
[   43.255380]  meson_drv_unbind+0x78/0xa4 [meson_drm]
[   43.260204]  component_del+0xc0/0x180
[   43.263829]  meson_dw_hdmi_remove+0x28/0x40 [meson_dw_hdmi]
[   43.269344]  platform_drv_remove+0x38/0x60
[   43.273398]  __device_release_driver+0x190/0x23c
[   43.277967]  driver_detach+0xcc/0x160
[   43.281590]  bus_remove_driver+0x68/0xe0
[   43.285471]  driver_unregister+0x3c/0x6c
[   43.289352]  platform_driver_unregister+0x20/0x2c
[   43.294011]  meson_dw_hdmi_platform_driver_exit+0x18/0x4a8 [meson_dw_hdmi]
[   43.300826]  __arm64_sys_delete_module+0x1bc/0x294
[   43.305570]  el0_svc_common.constprop.0+0x80/0x240
[   43.310312]  do_el0_svc+0x30/0xa0
[   43.313590]  el0_svc+0x18/0x50
[   43.316608]  el0_sync_handler+0x198/0x404
[   43.320574]  el0_sync+0x158/0x180
[   43.323852] ---[ end trace d796a3072dab01da ]---
[   43.328561] [drm:drm_mode_config_cleanup [drm]] *ERROR* connector HDMI-A-1 leaked!

both triggered by the fact that the HDMI subsystem is still active,
and the DRM removal doesn't result in the connectors being torn down.

Call drm_atomic_helper_shutdown() and component_unbind_all() to safely
tear the module down.

Fixes: 2d8f92897ad8 ("drm/meson: Uninstall IRQ handler")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-3-maz@kernel.org

drm/meson: Free RDMA resources after tearing down DRM

Removing the meson DRM module results in the following splat:

[ 2179.451346] Hardware name:  , BIOS 2021.01-rc2-00012-gde865f7ee1 11/16/2020
[ 2179.458316] Workqueue: events drm_mode_rmfb_work_fn [drm]
[ 2179.463597] pstate: 80c00009 (Nzcv daif +PAN +UAO -TCO BTYPE=--)
[ 2179.469558] pc : meson_rdma_writel_sync+0x44/0xb0 [meson_drm]
[ 2179.475243] lr : meson_g12a_afbcd_reset+0x34/0x60 [meson_drm]
[ 2179.480930] sp : ffffffc01212bb70
[ 2179.484207] x29: ffffffc01212bb70 x28: ffffff8044f66f00
[ 2179.489469] x27: ffffff8045b13800 x26: 0000000000000001
[ 2179.494730] x25: 0000000000000000 x24: 0000000000000001
[ 2179.499991] x23: 0000000000000000 x22: 0000000000000000
[ 2179.505252] x21: 0000000000280000 x20: 0000000000001a01
[ 2179.510513] x19: ffffff8046029480 x18: 0000000000000000
[ 2179.515775] x17: 0000000000000000 x16: 0000000000000000
[ 2179.521036] x15: 0000000000000000 x14: 0000000000000000
[ 2179.526297] x13: 0040000000000326 x12: 0309030303260300
[ 2179.531558] x11: 03000000054004a0 x10: 0418054004000400
[ 2179.536820] x9 : ffffffc008fe4914 x8 : ffffff8040a1adc0
[ 2179.542081] x7 : 0000000000000000 x6 : ffffff8042aa0080
[ 2179.547342] x5 : ffffff8044f66f00 x4 : ffffffc008fe5bc8
[ 2179.552603] x3 : 0000000000010101 x2 : 0000000000000001
[ 2179.557865] x1 : 0000000000000000 x0 : 0000000000000000
[ 2179.563127] Call trace:
[ 2179.565548]  meson_rdma_writel_sync+0x44/0xb0 [meson_drm]
[ 2179.570894]  meson_g12a_afbcd_reset+0x34/0x60 [meson_drm]
[ 2179.576241]  meson_plane_atomic_disable+0x38/0xb0 [meson_drm]
[ 2179.581966]  drm_atomic_helper_commit_planes+0x1e0/0x21c [drm_kms_helper]
[ 2179.588684]  drm_atomic_helper_commit_tail_rpm+0x68/0xb0 [drm_kms_helper]
[ 2179.595410]  commit_tail+0xac/0x190 [drm_kms_helper]
[ 2179.600326]  drm_atomic_helper_commit+0x16c/0x390 [drm_kms_helper]
[ 2179.606484]  drm_atomic_commit+0x58/0x70 [drm]
[ 2179.610880]  drm_framebuffer_remove+0x398/0x434 [drm]
[ 2179.615881]  drm_mode_rmfb_work_fn+0x68/0x8c [drm]
[ 2179.620575]  process_one_work+0x1cc/0x49c
[ 2179.624538]  worker_thread+0x200/0x444
[ 2179.628246]  kthread+0x14c/0x160
[ 2179.631439]  ret_from_fork+0x10/0x38

caused by the fact that the RDMA buffer has already been freed,
resulting in meson_rdma_writel_sync() getting a NULL pointer.

Move the afbcd reset and meson_rdma_free calls after the DRM
unregistration is complete so that the teardown can safely complete.

Fixes: d1b5e41e13a7 ("drm/meson: Add AFBCD module driver")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201116200744.495826-2-maz@kernel.org

drm/omap: dmm_tiler: fix return error code in omap_dmm_probe()

Return -ENOMEM when allocating refill memory failed.

Fixes: 71e8831f6407 ("drm/omap: DMM/TILER support for OMAP4+ platform")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117061045.3452287-1-yangyingliang@huawei.com

drm/qxl: Remove fbcon acceleration leftovers

These are leftovers from 13aff184ed9f ("drm/qxl: remove dead qxl fbdev
emulation code").

v2: Somehow these structs provided the struct qxl_device pre-decl,
reorder the header to not anger compilers.

Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201029133347.4088884-1-daniel.vetter@ffwll.ch

fbcon: Drop EXPORT_SYMBOL

Every since

commit 6104c37094e729f3d4ce65797002112735d49cd1
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Aug 1 17:32:07 2017 +0200

fbcon: Make fbcon a built-time depency for fbdev

these are no longer distinct loadable modules, so exporting symbols is
kinda pointless.

Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Helge Deller <deller@gmx.de>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029101428.4058311-2-daniel.vetter@ffwll.ch

fbcon: Disable accelerated scrolling

So ever since syzbot discovered fbcon, we have solid proof that it's
full of bugs. And often the solution is to just delete code and remove
features, e.g.  50145474f6ef ("fbcon: remove soft scrollback code").

Now the problem is that most modern-ish drivers really only treat
fbcon as an dumb kernel console until userspace takes over, and Oops
printer for some emergencies. Looking at drm drivers and the basic
vesa/efi fbdev drivers shows that only 3 drivers support any kind of
acceleration:

- nouveau, seems to be enabled by default
- omapdrm, when a DMM remapper exists using remapper rewriting for
  y/xpanning
- gma500, but that is getting deleted now for the GTT remapper trick,
  and the accelerated copyarea never set the FBINFO_HWACCEL_COPYAREA
  flag, so unused (and could be deleted already I think).

No other driver supportes accelerated fbcon. And fbcon is the only
user of this accel code (it's not exposed as uapi through ioctls),
which means we could garbage collect fairly enormous amounts of code
if we kill this.

Plus because syzbot only runs on virtual hardware, and none of the
drivers for that have acceleration, we'd remove a huge gap in testing.
And there's no other even remotely comprehensive testing aside from
syzbot.

This patch here just disables the acceleration code by always
redrawing when scrolling. The plan is that once this has been merged
for well over a year in released kernels, we can start to go around
and delete a lot of code.

v2:
- Drop a few more unused local variables, somehow I missed the
compiler warnings (Sam)
- Fix typo in comment (Jiri)
- add a todo entry for the cleanup (Thomas)

v3: Remove more unused variables (0day)

Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jiri Slaby <jirislaby@kernel.org>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: George Kennedy <george.kennedy@oracle.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Cc: Peter Rosin <peda@axentia.se>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029132229.4068359-1-daniel.vetter@ffwll.ch

video: fbdev: atmel_lcdfb: fix return error code in atmel_lcdfb_of_init()

If devm_kzalloc() failed after the first time, atmel_lcdfb_of_init()
can't return -ENOMEM, fix this by putting the error code in loop.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117061350.3453742-1-yangyingliang@huawei.com

drm: fix some kernel-doc markups

Some identifiers have different names between their prototypes
and the kernel-doc markup.

Others need to be fixed, as kernel-doc markups should use this format:
identifier - description

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/12d4ca26f6843618200529ce5445063734d38c04.1605521731.git.mchehab+huawei@kernel.org

video: fix some kernel-doc markups

Some identifiers have different names between their prototypes
and the kernel-doc markup.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/21661aed9892a1bacc7ef76a5dc9f5c7b37f5d8f.1605521731.git.mchehab+huawei@kernel.org

fbcon: Avoid using FNTCHARCNT() and hard-coded built-in font charcount

For user-provided fonts, the framebuffer layer is using a magic
negative-indexing macro, FNTCHARCNT(), to keep track of their number of
characters:

#define FNTCHARCNT(fd) (((int *)(fd))[-3])

For built-in fonts, it is using hard-coded values (256). This results in
something like the following:

map.length = (ops->p->userfont) ?
FNTCHARCNT(ops->p->fontdata) : 256;

This is unsatisfactory. In fact, there is already a `charcount` field in
our virtual console descriptor (see `struct console_font` inside `struct
vc_data`), let us use it:

map.length = vc->vc_font.charcount;

Recently we added a `charcount` field to `struct font_desc`. Use it to set
`vc->vc_font.charcount` properly. The idea is:

  - We only use FNTCHARCNT() on `vc->vc_font.data` and `p->fontdata`.
    Assume FNTCHARCNT() is working as intended;
  - Whenever `vc->vc_font.data` is set, also set `vc->vc_font.charcount`
    properly;
  - We can now replace `FNTCHARCNT(vc->vc_font.data)` with
    `vc->vc_font.charcount`;
  - Since `p->fontdata` always point to the same font data buffer with
    `vc->vc_font.data`, we can also replace `FNTCHARCNT(p->fontdata)` with
    `vc->vc_font.charcount`.

In conclusion, set `vc->vc_font.charcount` properly in fbcon_startup(),
fbcon_init(), fbcon_set_disp() and fbcon_do_set_font(), then replace
FNTCHARCNT() with `vc->vc_font.charcount`. No more if-else between
negative-indexing macros and hard-coded values.

Do not include <linux/font.h> in fbcon_rotate.c and tileblit.c, since they
no longer need it.

Depends on patch "Fonts: Add charcount field to font_desc".

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/e460a5780e54e3022661d5f09555144583b4cc59.1605169912.git.yepeilin.cs@gmail.com

parisc/sticore: Avoid hard-coding built-in font charcount

sti_select_fbfont() and sti_cook_fonts() are hard-coding the number of
characters of our built-in fonts as 256. Recently, we included that
information in our kernel font descriptor `struct font_desc`, so use
`fbfont->charcount` instead of hard-coded values.

Depends on patch "Fonts: Add charcount field to font_desc".

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/037186fb50cf3d17bb7bc9482357635b9df6076e.1605169912.git.yepeilin.cs@gmail.com

Fonts: Add charcount field to font_desc

Subsystems are hard-coding the number of characters of our built-in fonts
as 256. Include that information in our kernel font descriptor, `struct
font_desc`.

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/65952296d1d9486093bd955d1536f7dcd11112c6.1605169912.git.yepeilin.cs@gmail.com

console: Delete dummy con_font_set() and con_font_default() callback implementations

.con_font_set and .con_font_default callbacks should not pass `struct
console_font *` as a parameter, since `struct console_font` is a UAPI
structure.

We are trying to let them use our new kernel font descriptor, `struct
font_desc` instead. To make that work slightly easier, first delete all of
their no-op implementations used by dummy consoles.

This will make KD_FONT_OP_SET and KD_FONT_OP_SET_DEFAULT ioctl() requests
on dummy consoles start to fail and return `-ENOSYS`, which is intended,
since no user should ever expect such operations to succeed on dummy
consoles.

Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/9952c7538d2a32bb1a82af323be482e7afb3dedf.1605169912.git.yepeilin.cs@gmail.com

console: Delete unused con_font_copy() callback implementations

Recently in commit 3c4e0dff2095 ("vt: Disable KD_FONT_OP_COPY") we
disabled the KD_FONT_OP_COPY ioctl() option. Delete all the
con_font_copy() callbacks, since we no longer use them.

Mark KD_FONT_OP_COPY as "obsolete" in include/uapi/linux/kd.h, just like
what we have done for PPPIOCDETACH in commit af8d3c7c001a ("ppp: remove
the PPPIOCDETACH ioctl").

Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/c8d28007edf50de4387e1532eb3eb736db716f73.1605169912.git.yepeilin.cs@gmail.com

drm/panfrost: Move the GPU reset bits outside the timeout handler

We've fixed many races in panfrost_job_timedout() but some remain.
Instead of trying to fix it again, let's simplify the logic and move
the reset bits to a separate work scheduled when one of the queue
reports a timeout.

v5:
- Simplify panfrost_scheduler_stop() (Steven Price)
- Always restart the queue in panfrost_scheduler_start() even if
  the status is corrupted (Steven Price)

v4:
- Rework the logic to prevent a race between drm_sched_start()
  (reset work) and drm_sched_job_timedout() (timeout work)
- Drop Steven's R-b
- Add dma_fence annotation to the panfrost_reset() function (Daniel Vetter)

v3:
- Replace the atomic_cmpxchg() by an atomic_xchg() (Robin Murphy)
- Add Steven's R-b

v2:
- Use atomic_cmpxchg() to conditionally schedule the reset work
  (Steven Price)

Fixes: 1a11a88cfd9a ("drm/panfrost: Fix job timeout handling")
Cc: <stable@vger.kernel.org>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105151704.2010667-1-boris.brezillon@collabora.com

drm: fix oops in drm_atomic_set_crtc_for_connector

crtc can be NULL. connector, extracted from conn_state, can't.

Fixes: e3aae683e861 ("drm: convert drm_atomic_uapi.c to new debug helpers")
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7xhyNYrWtzUIt3HNrWfi9iScW0k475RZiKNfF5TbPs@cp4-web-031.plabs.ch

drm/virtio: Make virtgpu_dmabuf_ops with static keyword

Fix the following sparse warning:

./virtgpu_prime.c:46:33: warning: symbol 'virtgpu_dmabuf_ops' was not declared. Should it be static?

Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1605338173-22100-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/lima: Unconditionally call dev_pm_opp_of_remove_table()

dev_pm_opp_of_remove_table() doesn't report any errors when it fails to
find the OPP table with error -ENODEV (i.e. OPP table not present for
the device). And we can call dev_pm_opp_of_remove_table()
unconditionally here.

Reviewed-by: Qiang Yu <yuq825@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c995335d16d8b4b4ff47b1273869c33e14782b32.1603867405.git.viresh.kumar@linaro.org

drm/lima/lima_sched: Remove unused and unnecessary variable 'ret'

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/lima/lima_sched.c: In function ‘lima_sched_run_job’:
drivers/gpu/drm/lima/lima_sched.c:227:20: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable]

Cc: Qiang Yu <yuq825@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-24-lee.jones@linaro.org

drm/lima/lima_drv: Demote kernel-doc formatting abuse

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/lima/lima_drv.c:264: warning: cannot understand function prototype: 'const struct drm_driver lima_drm_driver = '

Cc: Qiang Yu <yuq825@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-16-lee.jones@linaro.org

drm/lima: simplify the return expression of lima_devfreq_target

Simplify the return expression.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: Qiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200919100850.1639111-1-liushixin2@huawei.com

drm/panel: s6e63m0: Set up some display info

Copy over the width/height in millimeters to the
(somewhat redundant) display info, and set up the
bus format and bus flags for the display.

When used as DPI this display requires DE to be
active low and pixel data to be output on the
negative edge. It might be that it was previously
used with a display controller that either does
not support these settings or was hardcoded to use
these as default. This information comes from the
source code of the Samsung GT-I9070 mobile phone.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-6-linus.walleij@linaro.org

drm/panel: s6e63m0: Support 3WIRE protocol

The panel can be connected using 3WIRE, then it is
however necessary that the flag SPI_3WIRE is preserved
on the device, as we set this from generic device tree
parsing code (or similar). Just |= the SPI mode.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-5-linus.walleij@linaro.org

drm/panel: s6e63m0: Add some explanations

The SPI DCS code was a bit hard to understand as the
device accepts 9-bit transfers packed into 16-bit words
with the most significant bit in bit 9 of the
16-bit word. Add some clarifying comments.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-4-linus.walleij@linaro.org

drm/panel: s6e63m0: Implement reading from panel

This code was found in the Samsung vendor tree for the
Samsung GT-I9070 mobile phone. Let's support reading before
we implement the 3WIRE protocol for both reading and
writing.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-3-linus.walleij@linaro.org

drm/panel: s6e63m0: Simplify SPI writing

This writing code is equivalent to the spi_write()
helper in the SPI framework. Insert a comment
that this will always work fine since SPI buffers
are in native endianness.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephan Gerhold <stephan@gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110234653.2248594-2-linus.walleij@linaro.org

drm/gma500: Remove 2D accel code

2D acceleration is only available on PSB and MRST and very slow on both
platforms. CPU acceleration is faster so don't bother with 2D accel
anymore.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201115175420.32167-1-patrik.r.jakobsson@gmail.com

drm/gma500: Remove GTT roll support

GTT roll support was used to accelerate fb panning on some machines.
Unfortunately this never worked properly with multiple monitors and
caused issues on others where the framebuffer wouldn't fit in stolen
memory. Let's remove it!

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028143608.1284-1-patrik.r.jakobsson@gmail.com

drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices

The OnePlus 6/T devices use different panels however they are
functionally identical with the only differences being the resolution.
The panels also don't seem to be used by any other devices, just combine
them into one driver.

The panels are: samsung,sofef00
and samsung,s6e3fc2x01

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[fixed checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-2-caleb@connolly.tech

dt-bindings: panel-simple-dsi: add samsung panels for OnePlus 6/T

Add compatibles for the samsung,sofef00 and samsung,s6e3fc2x01 panels
used in the OnePlus 6 & 6T respectively.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112161920.2671430-3-caleb@connolly.tech

drm/panel/panel-tpo-tpg110: Correct misnaming and supply missing param description

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/panel/panel-tpo-tpg110.c:94: warning: Function parameter or member 'panel_mode' not described in 'tpg110'
drivers/gpu/drm/panel/panel-tpo-tpg110.c:372: warning: Function parameter or member 'connector' not described in 'tpg110_get_modes'

Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113134938.4004947-14-lee.jones@linaro.org

drm: add debug logs for drm_mode_atomic_ioctl errors

Be nice to user-space and log what happened when returning EINVAL in
drm_mode_atomic_ioctl.

v2:

- Migrate to drm_dbg_atomic (Sam)
- Add debug log for arg->reserved (Ville)
- Drop redundant "atomic" word in log messages (Ville)

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/AVFi5ZzKwRVLtY8AQyxvqgIbcUfVgNebOtGVwSNMKvs@cp4-web-038.plabs.ch

drm: convert drm_atomic_uapi.c to new debug helpers

Migrate from DRM_DEBUG_ATOMIC to drm_dbg_atomic.

Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/FpVdsmqIh7IkH7YIwBjmp5ict1qi4NZlwHrIps@cp4-web-034.plabs.ch

drm/ttm: fix missing NULL check in the new page pool

The pool parameter can be NULL if we free through the shrinker.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Tested-by: Martin Peres <martin.peres@mupuf.org>
Acked-by: Martin Peres <martin.peres@mupuf.org>
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Tested-by: Andy Lavr <andy.lavr@gmail.com>
Link: https://patchwork.freedesktop.org/patch/399365/

drm/udl: Fix missing error code in udl_handle_damage()

If udl_get_urb() fails then this should return a negative error code
but currently it returns success.

Fixes: 798ce3fe1c3a ("drm/udl: Begin/end access to imported buffers in damage-handler")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201113101502.GD168908@mwanda

drm/via/via_dma: Remove set but unused variable 'agp_base'

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/via/via_dma.c: In function ‘via_cmdbuf_jump’:
drivers/gpu/drm/via/via_dma.c:596:11: warning: variable ‘agp_base’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-5-lee.jones@linaro.org

drm/sti/sti_hdmi: Move 'colorspace_mode_names' array to where its used

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/sti/sti_hdmi.h:36:40: warning: ‘colorspace_mode_names’ defined but not used [-Wunused-const-variable=]
36 | static const struct drm_prop_enum_list colorspace_mode_names[] = {
| ^~~~~~~~~~~~~~~~~~~~~

Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-28-lee.jones@linaro.org

include: drm: drm_atomic: Artificially use 'crtc' to avoid 'not used' warning

The precedent has already been set by other macros in the same file.

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/vkms/vkms_drv.c:55:19: warning: variable ‘crtc’ set but not used [-Wunused-but-set-variable]
55 | struct drm_crtc *crtc;
| ^~~~

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <robdclark@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-3-lee.jones@linaro.org

drm/savage/savage_bci: Remove set but never used 'aper_rsrc' and 'fb_rsrc'

The comment about them (also removed) says:

/* fb_rsrc and aper_rsrc aren't really used currently, but still exist
  * in case we decide we need information on the BAR for BSD in the
  * future.
  */

Well that was written 12 years ago in 2008.  We are now in the future
and they are still superfluous.  We can always add them again at a
later date if they are ever required.

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/savage/savage_bci.c: In function ‘savage_driver_firstopen’:
drivers/gpu/drm/savage/savage_bci.c:580:24: warning: variable ‘aper_rsrc’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/savage/savage_bci.c:580:15: warning: variable ‘fb_rsrc’ set but not used [-Wunused-but-set-variable]

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-2-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_plane: Fix documentation formatting and add missing description

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes]
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:44: warning: cannot understand function prototype: 'struct atmel_hlcdc_plane_state '

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-18-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_plane: Staticise local function 'atmel_hlcdc_plane_setup_scaler()'

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c:283:6: warning: no previous prototype for ‘atmel_hlcdc_plane_setup_scaler’ [-Wmissing-prototypes]

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-17-lee.jones@linaro.org

drm/atmel-hlcdc/atmel_hlcdc_crtc: Apply correct formatting to struct docs

And fix-up a misnamed member description.

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c:33: warning: cannot understand function prototype: 'struct atmel_hlcdc_crtc_state '
drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c:52: warning: cannot understand function prototype: 'struct atmel_hlcdc_crtc '

Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Boris Brezillon <bbrezillon@kernel.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112190039.2785914-14-lee.jones@linaro.org

drm/kmb: fix spelling mistakes in drm_info and drm_dbg messages

There are two spelling mistakes of the word sync in drm_info
and drm_dbg messages. Fix these.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109111225.1485190-1-colin.king@canonical.com

drm/kmb: Fix build warnings

Fixed the following W=1 kernel build warnings
drivers/gpu/drm/kmb/kmb_plane.h:74:18: warning: ‘kmb_formats_v’
defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/kmb/kmb_plane.h:61:18: warning: ‘kmb_formats_g’
defined but not used [-Wunused-const-variable=]

Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1605045169-2696-1-git-send-email-anitha.chrisanthus@intel.com

drm/nouveau: Fix out-of-bounds access when deferencing MMU type

The value of struct drm_device.ttm.type_vram can become -1 for unknown
types of memory (see nouveau_ttm_init()). This leads to an out-of-bounds
error when accessing struct nvif_mmu.type[]:

  [   18.304116] ==================================================================
  [   18.311649] BUG: KASAN: slab-out-of-bounds in nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.320415] Read of size 1 at addr ffff88810ffac1fe by task systemd-udevd/342
  [   18.327681]
  [   18.329208] CPU: 1 PID: 342 Comm: systemd-udevd Tainted: G            E     5.10.0-rc2-1-default+ #581
  [   18.338681] Hardware name: Dell Inc. OptiPlex 9020/0N4YC8, BIOS A24 10/24/2018
  [   18.346032] Call Trace:
  [   18.348536]  dump_stack+0xae/0xe5
  [   18.351919]  print_address_description.constprop.0+0x17/0xf0
  [   18.357787]  ? nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.363818]  __kasan_report.cold+0x20/0x38
  [   18.368099]  ? nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  [   18.374133]  kasan_report+0x3a/0x50
  [   18.377789]  nouveau_ttm_io_mem_reserve+0x17a/0x7e0 [nouveau]
  <...>
  [   18.767690] Allocated by task 342:
  [   18.773087]  kasan_save_stack+0x1b/0x40
  [   18.778890]  __kasan_kmalloc.constprop.0+0xbf/0xd0
  [   18.785646]  __kmalloc_track_caller+0x1be/0x390
  [   18.792165]  kstrdup_const+0x46/0x70
  [   18.797686]  kobject_set_name_vargs+0x2f/0xb0
  [   18.803992]  kobject_init_and_add+0x9d/0xf0
  [   18.810117]  ttm_mem_global_init+0x12c/0x210 [ttm]
  [   18.816853]  ttm_bo_global_init+0x4a/0x160 [ttm]
  [   18.823420]  ttm_bo_device_init+0x39/0x220 [ttm]
  [   18.830046]  nouveau_ttm_init+0x2c3/0x830 [nouveau]
  [   18.836929]  nouveau_drm_device_init+0x1b4/0x3f0 [nouveau]
  <...>
  [   19.105336] ==================================================================

Fix this error, by not using type_vram as an index if it's negative.
Assume default values instead.

The error was seen on Nvidia G72 hardware.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Fixes: 1cf65c45183a ("drm/ttm: add caching state to ttm_bus_placement")
Cc: Christian König <christian.koenig@amd.com>
Cc: Michael J. Ruhl <michael.j.ruhl@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Roland Scheidegger <sroland@vmware.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Likun Gao <Likun.Gao@amd.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201110133655.13174-1-tzimmermann@suse.de

dma-buf: Document that dma-buf size is fixed

The fact that the size of dma-buf is invariant over the lifetime of the
buffer is mentioned in the comment of 'dma_buf_ops.mmap', but is not
documented at where the info is defined. Add the missing documentation.

Signed-off-by: Jianxin Xiong <jianxin.xiong@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1605044477-51833-7-git-send-email-jianxin.xiong@intel.com

drm/ingenic: ipu: Search for scaling coefs up to 102% of the screen

Increase the scaled image's theorical width/height until we find a
configuration that has valid scaling coefficients, up to 102% of the
screen's resolution. This makes sure that we can scale from almost
every resolution possible at the cost of a very small distorsion.
The CRTC_W / CRTC_H are not modified.

This algorithm was already in place but would not try to go above the
screen's resolution, and as a result would only work if the CRTC_W /
CRTC_H were smaller than the screen resolution. It will now try until it
reaches 102% of the screen's resolution.

Note that this algorithm exists mostly as a band-aid for a missing
functionality: it is not possible for userspace to request the closest
mode that would encapsulate the provided one, because the GEM buffer is
created beforehand. If there was a way to let the kernel tweak the mode,
I could write a better algorithm that would result in a better looking
picture.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105083905.8780-1-paul@crapouillou.net

drm/radeon/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-5-airlied@gmail.com

drm/nouveau/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-4-airlied@gmail.com

drm/amdgpu/ttm: use multihop

This removes the code to move resources directly between
SYSTEM and VRAM in favour of using the core ttm mulithop code.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-3-airlied@gmail.com

drm/ttm: add multihop infrastrucutre (v3)

Currently drivers get called to move a buffer, but if they have to
move it temporarily through another space (SYSTEM->VRAM via TT)
then they can end up with a lot of ttm->driver->ttm call stacks,
if the temprorary space moves requires eviction.

Instead of letting the driver do all the placement/space for the
temporary, allow it to report back (-EMULTIHOP) and a placement (hop)
to the move code, which will then do the temporary move, and the
correct placement move afterwards.

This removes a lot of code from drivers, at the expense of
adding some midlayering. I've some further ideas on how to turn
it inside out, but I think this is a good solution to the call
stack problems.

v2: separate out the driver patches, add WARN for getting
MULTHOP in paths we shouldn't (Daniel)
v3: use memset (Christian)

Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: hristian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109005432.861936-2-airlied@gmail.com

Revert "drm/dp_mst: Retrieve extended DPCD caps for topology manager"

This reverts commit ad44c03208e46b83e4ae3269e32c9e524aa71cf8.

Currently DRM driver assume the source device caps is higher than the MST device
caps. With this commit, this statement would be broken.

e.g. the source device only support DP1.2 and the mst device support DP1.4.

Signed-off-by: Koba Ko <koba.ko@canonical.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103034907.72129-1-koba.ko@canonical.com

drm: remove pgprot_decrypted() before calls to io_remap_pfn_range()

commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") moves the pgprot_decrypted() into
io_remap_pfn_range(). Delete any, now confusing, open coded calls that
directly precede io_remap_pfn_range():

- drm_io_prot() is only in drm_mmap_locked() to call io_remap_pfn_range()

- fb_mmap() immediately calls vm_iomap_memory() which is a convenience
wrapper for io_remap_pfn_range()

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/0-v1-2e6a0db57868+166-drm_sme_clean_jgg@nvidia.com

drm: DRM_KMB_DISPLAY should depend on ARCH_KEEMBAY

The Intel Keem Bay display controller is only present on Intel Keem Bay
SoCs.  Hence add a dependency on ARCH_KEEMBAY, to prevent asking the
user about this driver when configuring a kernel without Intel Keem Bay
platform support.

Note that:
  1. The dependency on ARM is dropped, as Keem Bay SoCs are only
     supported in arm64 kernel builds,
  2. The dependencies on OF and COMMON_CLK can be dropped for
     compile-testing, as the driver builds fine regardless.

Fixes: ed794057b052b52a ("drm/kmb: Build files for KeemBay Display driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110144350.3279147-1-geert+renesas@glider.be

drm: DRM_KMB_DISPLAY should select DRM_MIPI_DSI

If CONFIG_DRM_MIPI_DSI=n:

    aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_unregister':
    kmb_dsi.c:(.text+0xa48): undefined reference to `mipi_dsi_host_unregister'
    aarch64-linux-gnu-ld: drivers/gpu/drm/kmb/kmb_dsi.o: in function `kmb_dsi_host_bridge_init':
    kmb_dsi.c:(.text+0xb14): undefined reference to `mipi_dsi_host_register'

Fix this be selecting DRM_MIPI_DSI, like other drivers do.

Fixes: ed794057b052b52a ("drm/kmb: Build files for KeemBay Display driver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110144219.3278831-1-geert+renesas@glider.be

Merge drm/drm-next into drm-misc-next

We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

drm: mxsfb: Implement .format_mod_supported

This will make sure applications which use the IN_FORMATS blob
to figure out which modifiers they can use will pick up the
linear modifier which is needed by mxsfb. Such applications
will not work otherwise if an incompatible implicit modifier
ends up being selected.

Before commit ae1ed0093281 ("drm: mxsfb: Stop using DRM simple
display pipeline helper"), the DRM simple display pipeline
helper took care of this.

Signed-off-by: Daniel Abrecht <public@danielabrecht.ch>
Fixes: ae1ed0093281 ("drm: mxsfb: Stop using DRM simple display pipeline helper")
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/2a99ffffc2378209307e0992a6e97e70@nodmarc.danielabrecht.ch

drm/vgem: replace idr_init() by idr_init_base()

idr_init() uses base 0 which is an invalid identifier. The new function
idr_init_base allows IDR to set the ID lookup from base 1. This avoids
all lookups that otherwise starts from 0 since 0 is always unused.

References: commit 6ce711f27500 ("idr: Make 1-based IDRs more efficient")

Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105173646.GA41732@localhost

Merge v5.10-rc3 into drm-next

We need commit f8f6ae5d077a ("mm: always have io_remap_pfn_range() set
pgprot_decrypted()") to be able to merge Jason's cleanup patch.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

drm/omap: Fix runtime PM imbalance on error

pm_runtime_get_sync() increments the runtime PM usage counter
even when it returns an error code. However, users of its
direct wrappers in omapdrm assume that PM usage counter will
not change on error. Thus a pairing decrement is needed on
the error handling path for these wrappers to keep the counter
balanced.

Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200822065743.13671-1-dinghao.liu@zju.edu.cn

drm: omapdrm: Replace HTTP links with HTTPS ones

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200713122859.34135-1-grandmaster@al2klimov.de

drm/tidss: use devm_platform_ioremap_resource_byname

Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.

Signed-off-by: Wang Xiaojun <wangxiaojun11@huawei.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200917062958.2183496-1-wangxiaojun11@huawei.com

drm/omap: dsi: Rework and remove a few unused variables

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘_dsi_print_reset_status’:
drivers/gpu/drm/omapdrm/dss/dsi.c:1131:6: warning: variable ‘l’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c: In function ‘dsi_update’:
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:10: warning: variable ‘dh’ set but not used [-Wunused-but-set-variable]
drivers/gpu/drm/omapdrm/dss/dsi.c:3943:6: warning: variable ‘dw’ set but not used [-Wunused-but-set-variable]

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-9-lee.jones@linaro.org

drm/omap: omap_irq: Fix a couple of doc-rot issues

The API has been updated, but the header was not.

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Function parameter or member 'crtc' not described in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'dev' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:115: warning: Excess function parameter 'pipe' description in 'omap_irq_enable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Function parameter or member 'crtc' not described in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'dev' description in 'omap_irq_disable_vblank'
drivers/gpu/drm/omapdrm/omap_irq.c:142: warning: Excess function parameter 'pipe' description in 'omap_irq_disable_vblank'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-5-lee.jones@linaro.org

drm/omap: dmm_tiler: Demote abusive use of kernel-doc format

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'dmm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:313: warning: Function parameter or member 'tcm' not described in 'dmm_txn_init'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'txn' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'area' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'pages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'npages' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:353: warning: Function parameter or member 'roll' not described in 'dmm_txn_append'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'txn' not described in 'dmm_txn_commit'
drivers/gpu/drm/omapdrm/omap_dmm_tiler.c:399: warning: Function parameter or member 'wait' not described in 'dmm_txn_commit'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Rob Clark <rob@ti.com>
Cc: Andy Gross <andy.gross@ti.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-10-lee.jones@linaro.org

drm/omap: gem: Fix misnamed and missing parameter descriptions

Fixes the following W=1 kernel build warning(s):

drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Function parameter or member 'file' not described in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:593: warning: Excess function parameter 'drm_file' description in 'omap_gem_dumb_create'
drivers/gpu/drm/omapdrm/omap_gem.c:619: warning: Function parameter or member 'offset' not described in 'omap_gem_dumb_map_offset'

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Rob Clark <rob.clark@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-9-lee.jones@linaro.org

drm: Use state helper instead of CRTC state pointer

Many drivers reference the crtc->pointer in order to get the current CRTC
state in their atomic_begin or atomic_flush hooks, which would be the new
CRTC state in the global atomic state since _swap_state happened when those
hooks are run.

Use the drm_atomic_get_new_crtc_state helper to get that state to make it
more obvious.

This was made using the coccinelle script below:

@ crtc_atomic_func @
identifier helpers;
identifier func;
@@

(
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_begin = func,
...,
};
|
static struct drm_crtc_helper_funcs helpers = {
...,
.atomic_flush = func,
...,
};
)

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct tegra_dc_state *crtc_state = e;
+ struct tegra_dc_state *dc_state = e;
  <+...
-       crtc_state
+ dc_state
  ...+>
  }

@@
identifier crtc_atomic_func.func;
identifier crtc, state;
symbol crtc_state;
expression e;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct mtk_crtc_state *crtc_state = e;
+ struct mtk_crtc_state *mtk_crtc_state = e;
  <+...
-       crtc_state
+ mtk_crtc_state
  ...+>
  }

@ replaces_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  ...
- struct drm_crtc_state *crtc_state = crtc->state;
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
}

@@
identifier crtc_atomic_func.func;
identifier crtc, state, crtc_state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
  struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
- crtc->state
+ crtc_state
  ...
}

@ adds_new_state @
identifier crtc_atomic_func.func;
identifier crtc, state;
@@

  func(struct drm_crtc *crtc, struct drm_atomic_state *state) {
+ struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
  ...
- crtc->state
+ crtc_state
  ...
}

@ include depends on adds_new_state || replaces_new_state @
@@

#include <drm/drm_atomic.h>

@ no_include depends on !include && (adds_new_state || replaces_new_state) @
@@

+ #include <drm/drm_atomic.h>
  #include <drm/...>

Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: "James (Qian) Wang" <james.qian.wang@arm.com>
Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Mihail Atanassov <mihail.atanassov@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105164518.392891-1-maxime@cerno.tech

drm/mediatek: Use struct dma_buf_map in GEM vmap ops

Fixes a build failure with mediatek.

This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
mediatek was forgotten.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arunpravin <apaneers@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Madhav Chauhan <madhav.chauhan@amd.com>
Cc: Nirmoy Das <Nirmoy.Das@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-3-tzimmermann@suse.de

drm/msm: Use struct dma_buf_map in GEM vmap ops

Fixes a build failure with msm.

This change was supposed to be part of commit 49a3f51dfeee ("drm/gem:
Use struct dma_buf_map in GEM vmap ops and convert GEM backends"), but
msm was forgotten.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 49a3f51dfeee ("drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: Qiang Yu <yuq825@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Rob Herring <robh@kernel.org>
Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arunpravin <apaneers@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: Madhav Chauhan <madhav.chauhan@amd.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Qinglang Miao <miaoqinglang@huawei.com>
Cc: dri-devel@lists.freedesktop.org
Cc: etnaviv@lists.freedesktop.org
Cc: lima@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: virtualization@lists.linux-foundation.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: xen-devel@lists.xenproject.org
Link: https://patchwork.freedesktop.org/patch/msgid/20201109103242.19544-2-tzimmermann@suse.de

drm/fb_helper: Use min_t() to handle size_t and unsigned long

On arm32:

    drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_read_screen_base’:
    include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
    ...
    drivers/gpu/drm/drm_fb_helper.c:2041:22: note: in expansion of macro ‘min’
     2041 |  size_t alloc_size = min(count, PAGE_SIZE);
  |                      ^~~
    drivers/gpu/drm/drm_fb_helper.c: In function ‘fb_write_screen_base’:
    include/linux/minmax.h:18:28: warning: comparison of distinct pointer types lacks a cast
    ...
    drivers/gpu/drm/drm_fb_helper.c:2115:22: note: in expansion of macro ‘min’
     2115 |  size_t alloc_size = min(count, PAGE_SIZE);
  |                      ^~~

Indeed, on 32-bit size_t is "unsigned int", not "unsigned long".

Fixes: 222ec45f4c69dfa8 ("drm/fb_helper: Support framebuffers in I/O memory")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201110090119.2667326-1-geert+renesas@glider.be

drm/ast: Create chip AST2600

[New] Support AST2600

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109093812.161483-1-kuohsiang_chou@aspeedtech.com

Merge tag 'amd-drm-next-5.11-2020-11-05' of git://people.freedesktop.org/~agd5f/linux into drm-next

amd-drm-next-5.11-2020-11-05:

amdgpu:
- Add initial support for Vangogh
- Add support for Green Sardine
- Add initial support for Dimgrey Cavefish
- Scatter/Gather display support for Renoir
- Updates for Sienna Cichlid
- Updates for Navy Flounder
- SMU7 power improvements
- Modifier support for gfx9+
- CI BACO fixes
- Arcturus SMU fixes
- Lots of code cleanups
- DC fixes
- Kernel doc fixes
- Add more GPU HW client information to page fault error logging
- MPO clock tuning for RV
- FP fixes for DCN3 on ARM and PPC

radeon:
- Expose voltage via hwmon on Sumo APUs

amdkfd:
- Fix unique id handling
- Misc fixes

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105222749.201798-1-alexander.deucher@amd.com

drm/gma500: Remove unused function psb_gem_get_aperture()

Apparently, the function was never used at all.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106124224.21201-1-tzimmermann@suse.de

drm/cma-helper: Make default object functions the default

As GEM object functions are now mandatory, DRM drivers based on CMA
helpers either set them in their implementation of gem_create_object,
or use the default via drm_gem_cma_create_object_default_funcs().

Simplify this by setting the default CMA object functions for all
objects that don't have any functions of their own. Follows the pattern
of similar code in SHMEM and VRAM helpers. The function
drm_gem_cma_create_object_default_funcs() is redundant and therefore
being removed.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106131632.6796-1-tzimmermann@suse.de

drm/fb_helper: Support framebuffers in I/O memory

At least sparc64 requires I/O-specific access to framebuffers. This
patch updates the fbdev console accordingly.

For drivers with direct access to the framebuffer memory, the callback
functions in struct fb_ops test for the type of memory and call the rsp
fb_sys_ of fb_cfb_ functions. Read and write operations are implemented
internally by DRM's fbdev helper.

For drivers that employ a shadow buffer, fbdev's blit function retrieves
the framebuffer address as struct dma_buf_map, and uses dma_buf_map
interfaces to access the buffer.

The bochs driver on sparc64 uses a workaround to flag the framebuffer as
I/O memory and avoid a HW exception. With the introduction of struct
dma_buf_map, this is not required any longer. The patch removes the rsp
code from both, bochs and fbdev.

v7:
* use min_t(size_t,) (kernel test robot)
* return the number of bytes read/written, if any (fbdev testcase)
v5:
* implement fb_read/fb_write internally (Daniel, Sam)
v4:
* move dma_buf_map changes into separate patch (Daniel)
* TODO list: comment on fbdev updates (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-11-tzimmermann@suse.de

dma-buf-map: Add memcpy and pointer-increment interfaces

To do framebuffer updates, one needs memcpy from system memory and a
pointer-increment function. Add both interfaces with documentation.

v5:
* include <linux/string.h> to build on sparc64 (Sam)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-10-tzimmermann@suse.de

drm/gem: Store client buffer mappings as struct dma_buf_map

Kernel DRM clients now store their framebuffer address in an instance
of struct dma_buf_map. Depending on the buffer's location, the address
refers to system or I/O memory.

Callers of drm_client_buffer_vmap() receive a copy of the value in
the call's supplied arguments. It can be accessed and modified with
dma_buf_map interfaces.

v6:
* don't call page_to_phys() on framebuffers in I/O memory;
warn instead (Daniel)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-9-tzimmermann@suse.de

drm/gem: Update internal GEM vmap/vunmap interfaces to use struct dma_buf_map

GEM's vmap and vunmap interfaces now wrap memory pointers in struct
dma_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-8-tzimmermann@suse.de

drm/gem: Use struct dma_buf_map in GEM vmap ops and convert GEM backends

This patch replaces the vmap/vunmap's use of raw pointers in GEM object
functions with instances of struct dma_buf_map. GEM backends are
converted as well. For most of them, this simply changes the returned type.

TTM-based drivers now return information about the location of the memory,
either system or I/O memory. GEM VRAM helpers and qxl now use ttm_bo_vmap()
et al. Amdgpu, nouveau and radeon use drm_gem_ttm_vmap() et al instead of
implementing their own vmap callbacks.

v7:
* init QXL cursor to mapped BO buffer (kernel test robot)
v5:
* update vkms after switch to shmem
v4:
* use ttm_bo_vmap(), drm_gem_ttm_vmap(), et al. (Daniel, Christian)
* fix a trailing { in drm_gem_vmap()
* remove several empty functions instead of converting them (Daniel)
* comment uses of raw pointers with a TODO (Daniel)
* TODO list: convert more helpers to use struct dma_buf_map

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-7-tzimmermann@suse.de

drm/ttm: Add vmap/vunmap to TTM and TTM GEM helpers

The new functions ttm_bo_{vmap,vunmap}() map and unmap a TTM BO in kernel
address space. The mapping's address is returned as struct dma_buf_map.
Each function is a simplified version of TTM's existing kmap code. Both
functions respect the memory's location ani/or writecombine flags.

On top TTM's functions, GEM TTM helpers got drm_gem_ttm_{vmap,vunmap}(),
two helpers that convert a GEM object into the TTM BO and forward the call
to TTM's vmap/vunmap. These helpers can be dropped into the rsp GEM object
callbacks.

v5:
* use size_t for storing mapping size (Christian)
* ignore premapped memory areas correctly in ttm_bo_vunmap()
* rebase onto latest TTM interfaces (Christian)
* remove BUG() from ttm_bo_vmap() (Christian)
v4:
* drop ttm_kmap_obj_to_dma_buf() in favor of vmap helpers (Daniel,
Christian)

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-6-tzimmermann@suse.de

drm/exynos: Remove empty exynos_drm_gem_prime_{vmap,vunmap}()

The functions exynos_drm_gem_prime_{vmap,vunmap}() are empty. Remove
them before changing the interface to use struct drm_buf_map. As a side
effect of removing drm_gem_prime_vmap(), the error code changes from
ENOMEM to EOPNOTSUPP.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-5-tzimmermann@suse.de

drm/etnaviv: Remove empty etnaviv_gem_prime_vunmap()

The function etnaviv_gem_prime_vunmap() is empty. Remove it before
changing the interface to use struct drm_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-4-tzimmermann@suse.de

drm/cma-helper: Remove empty drm_gem_cma_prime_vunmap()

The function drm_gem_cma_prime_vunmap() is empty. Remove it before
changing the interface to use struct drm_buf_map.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-3-tzimmermann@suse.de

drm/vram-helper: Remove invariant parameters from internal kmap function

The parameters map and is_iomem are always of the same value. Removed them
to prepares the function for conversion to struct dma_buf_map.

v4:
* don't check for !kmap->virtual; will always be false

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103093015.1063-2-tzimmermann@suse.de

drm/udl: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with udl_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-3-tzimmermann@suse.de

drm/tiny/gm12u320: Retrieve USB device from struct drm_device.dev

Drop the driver's udev field in favor of struct drm_device.dev. No
functional changes made.

v3:
* upcast dev with gm12u320_to_usb_device()
v2:
* upcast dev with drm_dev_get_usb_device()

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201103113456.3066-2-tzimmermann@suse.de

drm/ast: Fixed 1920x1080 sync. polarity issue

[Bug] Change the vertical synchroous polary of 1920x1080 @60Hz
from Negtive to Positive

Signed-off-by: KuoHsiang Chou <kuohsiang_chou@aspeedtech.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105094729.106059-1-kuohsiang_chou@aspeedtech.com

video: fbdev: riva: remove some unused varibles

Couple of variables are actually useless, remove them to save some gcc
warning:
drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable
‘color_key_enable’ set but not used [-Wunused-but-set-variable]

Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604822519-65607-1-git-send-email-alex.shi@linux.alibaba.com

drm/panel: simple: Add flags to boe_nv133fhm_n61

Reading the EDID of this panel shows that these flags should be set. Set
them so that we match what is in the EDID.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Fixes: b0c664cc80e8 ("panel: simple: Add BOE NV133FHM-N61")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106182333.3080124-1-swboyd@chromium.org

Merge tag 'driver-core-5.10-rc3' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core documentation fixes from Greg KH:
"Some small Documentation fixes that were fallout from the larger
  documentation update we did in 5.10-rc2.

  Nothing major here at all, but all of these have been in linux-next
  and resolve build warnings when building the documentation files"

* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: remove mic/index from misc-devices/index.rst
  scripts: get_api.pl: Add sub-titles to ABI output
  scripts: get_abi.pl: Don't let ABI files to create subtitles
  docs: leds: index.rst: add a missing file
  docs: ABI: sysfs-class-net: fix a typo
  docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys

Merge tag 'tty-5.10-rc3' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial fixes from Greg KH:
"Here are a small number of small tty and serial fixes for some
  reported problems for the tty core, vt code, and some serial drivers.

  They include fixes for:

   - a buggy and obsolete vt font ioctl removal

   - 8250_mtk serial baudrate runtime warnings

   - imx serial earlycon build configuration fix

   - txx9 serial driver error path cleanup issues

   - tty core fix in release_tty that can be triggered by trying to bind
     an invalid serial port name to a speakup console device

  Almost all of these have been in linux-next without any problems, the
  only one that hasn't, just deletes code :)"

* tag 'tty-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  vt: Disable KD_FONT_OP_COPY
  tty: fix crash in release_tty if tty->port is not set
  serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init
  tty: serial: imx: enable earlycon by default if IMX_SERIAL_CONSOLE is enabled
  serial: 8250_mtk: Fix uart_get_baud_rate warning

Merge tag 'usb-5.10-rc3' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some small USB fixes and new device ids:

   - USB gadget fixes for some reported issues

   - Fixes for the ever-troublesome apple fastcharge driver, hopefully
     we finally have it right.

   - More USB core quirks for odd devices

   - USB serial driver fixes for some long-standing issues that were
     recently found

   - some new USB serial driver device ids

  All have been in linux-next with no reported issues"

* tag 'usb-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: apple-mfi-fastcharge: fix reference leak in apple_mfi_fc_set_property
  usb: mtu3: fix panic in mtu3_gadget_stop()
  USB: serial: option: add Telit FN980 composition 0x1055
  USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231
  USB: serial: cyberjack: fix write-URB completion race
  USB: Add NO_LPM quirk for Kingston flash drive
  USB: serial: option: add Quectel EC200T module support
  usb: raw-gadget: fix memory leak in gadget_setup
  usb: dwc2: Avoid leaving the error_debugfs label unused
  usb: dwc3: ep0: Fix delay status handling
  usb: gadget: fsl: fix null pointer checking
  usb: gadget: goku_udc: fix potential crashes in probe
  usb: dwc3: pci: add support for the Intel Alder Lake-S

fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parent

current->group_leader->exit_signal may change during copy_process() if
current->real_parent exits.

Move the assignment inside tasklist_lock to avoid the race.

Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vt: Disable KD_FONT_OP_COPY

It's buggy:

On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote:
> We recently discovered a slab-out-of-bounds read in fbcon in the latest
> kernel ( v5.10-rc2 for now ).  The root cause of this vulnerability is that
> "fbcon_do_set_font" did not handle "vc->vc_font.data" and
> "vc->vc_font.height" correctly, and the patch
> <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this
> issue.
>
> Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and
> use  KD_FONT_OP_SET again to set a large font.height for tty1. After that,
> we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data
> in "fbcon_do_set_font", while tty1 retains the original larger
> height. Obviously, this will cause an out-of-bounds read, because we can
> access a smaller vc_font.data with a larger vc_font.height.

Further there was only one user ever.
- Android's loadfont, busybox and console-tools only ever use OP_GET
  and OP_SET
- fbset documentation only mentions the kernel cmdline font: option,
  not anything else.
- systemd used OP_COPY before release 232 published in Nov 2016

Now unfortunately the crucial report seems to have gone down with
gmane, and the commit message doesn't say much. But the pull request
hints at OP_COPY being broken

https://github.com/systemd/systemd/pull/3651

So in other words, this never worked, and the only project which
foolishly every tried to use it, realized that rather quickly too.

Instead of trying to fix security issues here on dead code by adding
missing checks, fix the entire thing by removing the functionality.

Note that systemd code using the OP_COPY function ignored the return
value, so it doesn't matter what we're doing here really - just in
case a lone server somewhere happens to be extremely unlucky and
running an affected old version of systemd. The relevant code from
font_copy_to_all_vcs() in systemd was:

/* copy font from active VT, where the font was uploaded to */
cfo.op = KD_FONT_OP_COPY;
cfo.height = vcs.v_active-1; /* tty1 == index 0 */
(void) ioctl(vcfd, KDFONTOP, &cfo);

Note this just disables the ioctl, garbage collecting the now unused
callbacks is left for -next.

v2: Tetsuo found the old mail, which allowed me to find it on another
archive. Add the link too.

Acked-by: Peilin Ye <yepeilin.cs@gmail.com>
Reported-by: Minh Yuan <yuanmingbuaa@gmail.com>
References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html
References: https://github.com/systemd/systemd/pull/3651
Cc: Greg KH <greg@kroah.com>
Cc: Peilin Ye <yepeilin.cs@gmail.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>